commit ffc82ed665314ccf141abc4710830f3f424d98ea Author: Greg Kroah-Hartman Date: Wed Aug 19 18:20:32 2026 +0200 Linux 7.1.9 Link: https://lore.kernel.org/r/20260817132536.752504388@linuxfoundation.org Tested-by: Ronald Warsow Tested-by: Justin M. Forbes Tested-by: Salvatore Bonaccorso Tested-by: Pavel Machek (CIP) Tested-by: Florian Fainelli Tested-by: Peter Schneider Tested-by: Barry K. Nathan Tested-by: Ron Economos Tested-by: Takeshi Ogasawara Tested-by: Mark Brown Tested-by: Brett A C Sheffield Tested-by: Shuah Khan Tested-by: Benjamin Boortz Tested-by: Miguel Ojeda Tested-by: Jeffrin Jose T Signed-off-by: Greg Kroah-Hartman commit 0a8c9ed4f166216642a8c084f0de415169c88088 Author: Xu Rao Date: Wed Jun 24 14:27:03 2026 +0800 thunderbolt: Fix bandwidth group reservation indexing commit d2ee4d47aacbd2ba456092eeec670dba35fde291 upstream. Valid bandwidth group IDs range from 1 through MAX_GROUPS, while Group ID 0 is reserved. tb_consumed_dp_bandwidth() uses the Group ID directly to index its local group_reserved[] array. The array currently has MAX_GROUPS entries, so its valid indices are 0 through MAX_GROUPS - 1. Group ID MAX_GROUPS therefore accesses one element past the end, and the final group's reserved bandwidth is not included when the array is summed. Give group_reserved[] MAX_GROUPS + 1 entries so direct Group ID indexing covers the reserved ID 0 and valid IDs 1 through MAX_GROUPS. Fixes: 52a4490e89d7 ("thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit f32c3a9a77cfb50934a60b05d5407649af062535 Author: Bryam Vargas Date: Thu Jun 25 06:54:09 2026 -0500 thunderbolt: Bound the DROM dual link port number before indexing sw->ports commit d6764992f17b23d91ff93ce905ab53c2aa7191f0 upstream. tb_drom_parse_entry_port() validates the device-supplied header->index against sw->config.max_port_number before indexing sw->ports[], but the sibling field entry->dual_link_port_nr -- a 6-bit value also read from the DROM -- indexes the same array with no such check. A malicious or malformed Thunderbolt device can set dual_link_port_nr beyond the allocated sw->ports[] (max_port_number + 1 entries), producing an out-of-bounds tb_port pointer that is stored and later dereferenced. Reject a port entry whose dual_link_port_nr exceeds max_port_number, the same bound already applied to header->index. Fixes: cd22e73bdf5e ("thunderbolt: Read port configuration from eeprom.") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit 163847552a571bd55094291f4ffcdc1de0f14a7b Author: Qing Ming Date: Tue Aug 11 23:28:03 2026 +0800 sctp: clear new_transport when removing a peer commit beb33f8ee1ca83acddb2a5ae80f3d22ec550b4c3 upstream. sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT. Fixes: 6af29ccc223b ("sctp: Bundle HEAERTBEAT into ASCONF_ACK") Cc: stable@vger.kernel.org Signed-off-by: Qing Ming Acked-by: Xin Long Link: https://patch.msgid.link/20260811152803.5629-1-a0yami@mailbox.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d949992bc3f00027a2c755e860a11950c75f6073 Author: Yuxiang Yang Date: Sun Aug 9 12:38:06 2026 +0800 sctp: fix use-after-free of cached ASCONF chunk commit 8c283e7b56adce00193837f3311b06662466fb21 upstream. addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry if no outstanding ASCONF remains. Fixes: a000c01e60e4 ("sctp: stop pending timers and purge queues when peer restart asoc") Cc: stable@vger.kernel.org Suggested-by: Xin Long Signed-off-by: Yuxiang Yang Acked-by: Xin Long Link: https://patch.msgid.link/20260809043806.2768302-1-yangyx22@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5ccf35ef0ed6059cdf8b1f4606a6584d5b67166b Author: Baul Lee Date: Thu Jul 30 01:00:28 2026 +0900 sctp: keep chunk->transport in step with the list it is queued on commit 9f2cf069a9a72a2d6b97ca8b4c70e714aac99749 upstream. __sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's transmitted list without updating chunk->transport: if (chunk->tsn_gap_acked) { list_move_tail(&chunk->transmitted_list, &transport->transmitted); continue; } The chunk then sits on a live transport's list while chunk->transport still names a different one. If that transport is removed - sctp_assoc_rm_peer() from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk is left with a dangling pointer. sctp_assoc_rm_peer() scrubs peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on neither. The pointer is not followed while tsn_gap_acked is set. A SACK that reneges on the TSN clears the flag, and the next SACK reaches tchunk->transport->flight_size -= sctp_data_size(tchunk); inside the freed transport. KASAN reports a slab-use-after-free read in sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the removal and the SACKs come from the association peer. Set chunk->transport at the move. The ordinary resend path needs nothing: it reaches its list_move_tail() only after sctp_packet_append_chunk() returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the chunk by then. Discovered by XBOW, triaged by Baul Lee Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Acked-by: Xin Long Link: https://patch.msgid.link/20260729160028.54546-1-baul.lee@xbow.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 65a740633570e3c69070301f02ed9c9c3a1972a1 Author: Xu Rao Date: Mon Aug 3 17:53:28 2026 +0800 scsi: scsi_debug: Negate wrapped memcmp() result commit c4f6916a99cf105c3ff340b6210fcbba3fa66b35 upstream. comp_write_worker() returns true when the compared data matches. memcmp() returns zero for equal data and non-zero for different data, so its result must be negated before it is stored in a bool. The first segment already uses !memcmp(), but the wrapped segment uses memcmp() directly, reversing the match result. Use !memcmp() there as well. Fixes: 38d5c8336e60 ("scsi_debug: add Report supported opcodes+tmfs; Compare and write") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Reviewed-by: John Garry Link: https://patch.msgid.link/E5AD42E9C0E18633+20260803095328.3445311-1-raoxu@uniontech.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 1cec526cf0a2227395f2c2f4b671cb052ff0b00e Author: Chengfeng Ye Date: Sun Jul 19 23:22:07 2026 +0800 bpf, sockmap: Fix sk_redir use-after-free in send verdict commit a76624733730e541e4955fdecf506af2f6b20558 upstream. sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dereferences it. KASAN reported: BUG: KASAN: slab-use-after-free in tcp_bpf_sendmsg_redir+0xf39/0x1020 Read of size 8 at addr ffff888108537090 by task poc/87 Call Trace: tcp_bpf_sendmsg_redir+0xf39/0x1020 tcp_bpf_sendmsg+0x977/0x1a50 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 85: sk_prot_alloc+0x56/0x210 sk_clone+0x6f/0x14b0 inet_csk_clone_lock+0x24/0x740 tcp_create_openreq_child+0x25/0x2710 tcp_v4_syn_recv_sock+0x10a/0xe00 Freed by task 0: __kasan_slab_free+0x43/0x70 slab_free_after_rcu_debug+0xa6/0x1e0 rcu_core+0x50a/0x1850 Last potentially related work creation: __sk_destruct+0x3da/0x540 sk_psock_destroy+0x81e/0xab0 process_one_work+0x63a/0x1070 Take a temporary socket reference while the source socket lock still protects psock->sk_redir, and drop it after tcp_bpf_sendmsg_redir() returns. This keeps each unlocked use independent of cached-verdict ownership. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Chengfeng Ye Reviewed-by: John Fastabend Reviewed-by: Emil Tsalapatis Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20260719152207.2892156-1-nicoyip.dev@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Greg Kroah-Hartman commit 911d5c32a54c02116c62526c655b72b22d08c4f7 Author: Eric Biggers Date: Mon Aug 3 11:12:32 2026 -0700 fsverity: Fix silent truncation in bpf_get_fsverity_digest() commit 7c68ed5c5ad4c185ea9654f5d8ee36560277b7dd upstream. bpf_get_fsverity_digest() silently truncates the digest if the provided buffer is too small. This is a footgun, and it doesn't match the semantics of the equivalent UAPI (FS_IOC_MEASURE_VERITY). Change it to return -EOVERFLOW instead, matching FS_IOC_MEASURE_VERITY. Fixes: 67814c00de31 ("bpf, fsverity: Add kfunc bpf_get_fsverity_digest") Signed-off-by: Eric Biggers Acked-by: Song Liu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20260803181232.14743-3-ebiggers@kernel.org Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Greg Kroah-Hartman commit 5bd63cad9df4328a184c409fbdad4f17944bcdb8 Author: Eric Biggers Date: Mon Aug 3 11:12:31 2026 -0700 fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions commit 3e8ec7c0387273329374f5c7bd61f5f38af71fe1 upstream. The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used. Fixes: 67814c00de31 ("bpf, fsverity: Add kfunc bpf_get_fsverity_digest") Signed-off-by: Eric Biggers Acked-by: Kumar Kartikeya Dwivedi Acked-by: Song Liu Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20260803181232.14743-2-ebiggers@kernel.org Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Greg Kroah-Hartman commit 267ecd2eb7759c26f1a026eb0a5b231071534c9c Author: Hugh Dickins Date: Mon Jul 27 22:24:14 2026 -0700 mm/filemap: __filemap_add_folio() restore index before retrying commit 86da3f7e1e609e1e8bfbab198af68467c5a015a5 upstream. In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom of the loop, so the retry does a full re-evaluation after reacquiring the lock, and cannot reach xas_store() with the wrong index. Production was suffering from rare SIGILLs and SIGSEGVs, executable text found a page away from where it belonged, !folio_contains() bug hit when debug enabled: symptoms not seen since this patch went in. Link: https://lore.kernel.org/562fbfa6-dd6d-0b6a-2461-ed2ff1173bc8@google.com Fixes: 200a89c159a7 ("mm/filemap: use xas_try_split() in __filemap_add_folio()") Signed-off-by: Hugh Dickins Acked-by: Kiryl Shutsemau (Meta) Reviewed-by: Matthew Wilcox (Oracle) Reviewed-by: Zi Yan Cc: Chris J Arges Cc: David Hildenbrand Cc: Jan Kara Cc: Kairui Song Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 0baed1fa2184c81e4baf76f445d3faa4b738c8f7 Author: Mimi Zohar Date: Mon Jul 27 20:39:41 2026 -0400 ima: Instantiate file_truncate and path_truncate hooks commit b80bed5c871a80151351342c065579405ce77145 upstream. Instantiate the file_truncate and path_truncate LSM hooks to reset the action cache flags (IMA_DONE_MASK) as soon as truncation is requested, so the file, based on policy, is re-collected, re-measured, re-audited, and re-appraised on next access. Tested-by: Frederick Lawler Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit a054c9ffa9b7a0dffb763837b91ac9d381ec6d10 Author: Tejun Heo Date: Thu Jul 16 10:44:02 2026 -1000 sched_ext: Take cgroup_lock() first in scx_cgroup_lock() commit 5f8b69642d18e1f3e11996707842ac530444e959 upstream. scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes cgroup_lock(), which can deadlock through kernfs: scx enable/disable cgroup rmdir cpu.weight write ------------------ ------------ ---------------- cgroup_lock() percpu_down_write(rwsem) cgroup_lock() kernfs_get_active() percpu_down_read(rwsem) kernfs_drain() The enable path waits for the rmdir to release cgroup_mutex. The rmdir, deactivating the cpu controller's files, waits in kernfs_drain() for the write's active reference. The write, in scx_group_set_weight(), waits for the rwsem behind the pending writer. Take cgroup_lock() first. The set_* paths take no cgroup locks inside the read side, so a pending write-lock then only waits for read sections that always run to completion, and no dependency from the rwsem back to cgroup_mutex remains. Fixes: a5bd6ba30b33 ("sched_ext: Use cgroup_lock/unlock() to synchronize against cgroup operations") Cc: stable@vger.kernel.org # v6.18+ Signed-off-by: Tejun Heo Reviewed-by: Andrea Righi Signed-off-by: Greg Kroah-Hartman commit d217d851f0a26d42fbc19e44c789e40f25db3498 Author: Tejun Heo Date: Sun Jul 12 07:23:55 2026 -1000 sched/psi: Create the psimon kthread outside of cgroup_mutex commit fadeedd7cfc5d73d33fa3d7ac54b9b27aabd09d2 upstream. a5b98009f16d ("sched/psi: fix race between file release and pressure write") made pressure_write() hold cgroup_mutex across psi_trigger_create(), which forks the psimon kthread for the first rtpoll trigger. As kthread creation depends on the whole fork path, the commit inadvertently created a lot of unwanted locking dependencies from cgroup_mutex. sched_ext got hit by one: its enable path blocks forks and then grabs cgroup_mutex, so a pressure write racing a scheduler enable deadlocks, with every other fork piling up behind. Fix it by splitting trigger creation so that the worker is forked with cgroup_mutex dropped and the kernfs active reference left broken. The latter matters because rmdir and cgroup.pressure writes drain active references under cgroup_mutex. Publishing the trigger last keeps error reporting synchronous and preserves the of->priv lifetime rules. The trigger registered in the first stage pins the group's rtpoll machinery across the unlocked window, leaving only creation races to resolve. The catch-up poll on installation covers scheduling attempts dropped while there was no worker. v2: Retagged sched/psi (was cgroup). Fixes: a5b98009f16d ("sched/psi: fix race between file release and pressure write") Cc: stable@vger.kernel.org Cc: Edward Adam Davis Cc: Chen Ridong Reported-by: Matt Fleming Closes: https://lore.kernel.org/all/20260710100441.2653477-1-matt@readmodwrite.com/ Signed-off-by: Tejun Heo Acked-by: Johannes Weiner Tested-by: Matt Fleming Acked-by: Suren Baghdasaryan Signed-off-by: Greg Kroah-Hartman commit 611e7821c4f83a671455658797336faecc3a5196 Author: Tejun Heo Date: Sun Jul 12 07:23:55 2026 -1000 sched/psi: Shut down rtpoll_timer in psi_cgroup_free() commit 5457025fa8ca3c0d2732109513de839e3e797190 upstream. psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above. Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again. Fixes: 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") Cc: stable@vger.kernel.org # v5.10+ Reported-by: Sashiko AI Closes: https://lore.kernel.org/all/20260711000434.36C4A1F000E9@smtp.kernel.org/ Signed-off-by: Tejun Heo Acked-by: Johannes Weiner Tested-by: Matt Fleming Acked-by: Suren Baghdasaryan Signed-off-by: Greg Kroah-Hartman commit 98516ba8b817f34e86bdd7a5b7a383cff75c3ddf Author: Zhan Xusheng Date: Sat Jul 25 16:00:04 2026 +0800 fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() commit cf6c993c0feca7984797e634deba3c80342e199a upstream. fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing an encryption policy to be set, instead of the idmap of the mount the ioctl was issued on. fscrypt is used by filesystems that support idmapped mounts (e.g. ext4, f2fs), so on such a mount this compares the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EACCES and an unrelated caller wrongly allowed. Use file_mnt_idmap(filp) instead. Fixes: 14f3db5542e6 ("ext4: support idmapped mounts") Cc: stable@vger.kernel.org Signed-off-by: Zhan Xusheng Link: https://patch.msgid.link/20260725080004.929328-1-zhanxusheng1024@gmail.com Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman commit 2d2b2ed7bdcc6df4942292318c5455b5e94ba525 Author: Andrey Albershteyn Date: Mon Jul 27 11:43:52 2026 +0200 fs,fsverity: remove check for fsverity being enabled in setattr_prepare() commit d2f96bcb89d36d488a10e3bcf819b98536968286 upstream. The check that fs-verity is available in the kernel is not necessary here. Filesystems could have fsverity files even without fs-verity enabled. In that case, truncate on fsverity file will succeed, what this check is trying to prevent. Fixes: e9734653c523 ("fs,fsverity: reject size changes on fsverity files in setattr_prepare") Cc: stable@vger.kernel.org Signed-off-by: Andrey Albershteyn Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260727094352.1734826-1-aalbersh@kernel.org Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman commit fbf40faa0414b753212494ad197542002e66ed9e Author: Zhiling Zou Date: Mon Aug 3 14:12:33 2026 +0800 ip6_tunnel: clear skb2->cb[] in ip6ip6_err() commit f803c086399da277b5d0ff36a107d0f162751800 upstream. ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack. Fixes: e490d1d85cf5 ("[IPV6] IP6TUNNEL: Split out generic routine in ip6ip6_err().") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/fe1a5e765fbca88d69391887f0ed26a19e3e4d39.1785736562.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit da64ed1f346ba84df574d6469fa2e422b2511719 Author: Yuejie Shi Date: Thu Jul 30 11:52:32 2026 +0800 ipv6: fix Route Information option length validation commit d1ad8fb2ac6a1afb71dc22d9ae8efb4dda96c824 upstream. rt6_route_rcv() validates the Route Information option (RFC 4191) length against the prefix length, but both checks are off by one. rinfo->length is the ND option length in units of 8 octets and it *includes* the 8-byte option header, so an option carrying N bytes of prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3 when Prefix Length is greater than 64, and 2 or 3 when it is greater than 0. The code accepts length >= 2 and length >= 1 respectively. ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix, so a Router Advertisement with (prefix_len=128, length=2) or (prefix_len=64, length=1) makes the kernel read up to 8 bytes past the end of the option. Those bytes end up in the prefix of the route that gets installed, so they are visible to userspace: # RA with a Route Information option (prefix_len=128, length=2) # followed by a source link-layer address option, 01 01 de ad be ef ca fe $ ip -6 route show 2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra ^^^^^^^^^^^^^^^^^^ the next option, read out of bounds When the Route Information option is the last one in the packet, those eight bytes come from the skb tail room instead. Reject the option lengths RFC 4191 does not allow. Fixes: 70ceb4f53929 ("[IPV6]: ROUTE: Add experimental support for Route Information Option in RA (RFC4191).") Cc: stable@vger.kernel.org Signed-off-by: Yuejie Shi Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260730035310.74584-1-syjcnss@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4adc4c9a9a43d61fe476dfe10811f3df2e7e4106 Author: Lorenzo Stoakes (ARM) Date: Thu Jul 23 16:16:34 2026 +0100 mm/ptdump: always stabilise against page table freeing using init_mm commit 27c32e5538344b13c1505a08861e04620c125d47 upstream. Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table"), so we target this in the Fixes tag. Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-4-8cc77dcc0018@kernel.org Fixes: b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") Signed-off-by: Lorenzo Stoakes (ARM) Reviewed-by: Mike Rapoport (Microsoft) Acked-by: David Hildenbrand (Arm) Reviewed-by: Kiryl Shutsemau Cc: Andy Lutomirski Cc: "Borah, Chaitanya Kumar" Cc: "Borislav Petkov (AMD)" Cc: Catalin Marinas Cc: Dave Hansen Cc: David Carlier Cc: Dev Jain Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Liam R. Howlett Cc: Michal Hocko Cc: Peter Zijlstra Cc: Ryan Roberts Cc: Shakeel Butt Cc: Suren Baghdasaryan Cc: Toshi Kani Cc: "Uladzislau Rezki (Sony)" Cc: Vlastimil Babka Cc: Will Deacon Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit b726eb3c94d23e09da0e0f46b0fa09fb2b5d99cc Author: Zhiling Zou Date: Thu Jul 23 00:48:13 2026 +0800 mm/page_table_check: skip special zero mappings commit 8db4bab826ccc9ec10fa41736a48031cd338d392 upstream. page_table_check_set() and page_table_check_clear() account mappings based on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special mappings, but page_table_check can still account them as file-backed pages. An unprivileged process can populate enough zero mappings to overflow file_map_count and hit the existing BUG_ON(). The PTE path can do this with the shared zero page, and the PMD path can do the same with huge zero mappings. Skip special zero mappings in the user page-table accounting paths. Keep the PTE-side pte_special() check, and identify huge zero PMDs from the mapped folio instead of pmd_special(). That covers architectures where pmd_special() is a no-op without adding huge_zero_pfn checks to the generic counter helpers. Link: https://lore.kernel.org/cover.1784717203.git.zhilinz@nebusec.ai Link: https://lore.kernel.org/e94478e4fb7912fb7e8ebebed5ce85d00dc9a69d.1784717203.git.zhilinz@nebusec.ai Fixes: df4e817b7108 ("mm: page table check") Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Reported-by: Vega Cc: Pasha Tatashin Assisted-by: Codex:gpt-5.4 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 5e6e2a18c20e88167d414f666032792e8bf19b80 Author: Tengda Wu Date: Mon Aug 3 00:56:39 2026 +0000 ring-buffer: Use current_context for safe per-CPU buffer swap commit f27bdc43077e4fcb5557dfc315ee8d91e741f483 upstream. The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap. Cc: stable@vger.kernel.org Fixes: 4239c38fe0b3 ("ring-buffer: Process commits whenever moving to a new page.") Link: https://patch.msgid.link/20260803005640.2445666-2-wutengda@huaweicloud.com Signed-off-by: Tengda Wu Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 3b3e0a6ee5bb3ac000f135beef26b2b7ed1a771a Author: Vincent Donnefort Date: Thu Aug 6 22:13:03 2026 +0100 ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() commit 6d014e44b68ddd43f71288d2a4dbb1a259869149 upstream. In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0. This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if when freed: free_buffer_page() relies on this value. Align the value with the actual allocation size (buffer::subbuf_order). Cc: stable@vger.kernel.org Fixes: f9b94daa542a ("ring-buffer: Set new size of the ring buffer sub page") Link: https://patch.msgid.link/20260806211306.3704194-4-vdonnefort@google.com Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit f8d7e5751267637190eff887c971d5b468106213 Author: Ahmad Byagowi Date: Tue Aug 4 14:07:51 2026 -0700 ptp: ocp: Fix board ID over-read commit 6b69f2ef10cdb018c0b127a7cab88e590bbddba4 upstream. The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan. Fixes: 0cfcdd1ebcfe ("ptp: ocp: add nvmem interface for accessing eeprom") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Byagowi Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20260804210751.48248-1-ahmadexp@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2004172036eca94b37ca3f666e22f4fa73869c74 Author: Rafael J. Wysocki Date: Fri Jul 31 15:01:15 2026 +0200 Revert "thermal: hwmon: Register a hwmon device for each thermal zone" commit f93d951ce0d02b5dca01c0c72add411fb17849bb upstream. Revert commit d6323469bcfb ("thermal: hwmon: Register a hwmon device for each thermal zone") that changed the names of hwmon class devices associated with thermal zones and their sysfs layout which made user space unhappy. Closes: https://lore.kernel.org/linux-pm/cafd8af9-c6e9-4bf2-b496-23e796fbc9a6@linux.dev/ Closes: https://lore.kernel.org/linux-hwmon/ab8b093b-46e6-4738-afcf-4b97c9ad5af9@googlemail.com/ Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2301040.irdbgypaU6@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman commit 6b446d335ba16e93a266dd77adf1ba51abc82df4 Author: Rafael J. Wysocki Date: Tue Aug 4 22:09:10 2026 +0200 Revert "thermal/drivers/hwmon: Cleanup coding style a bit" commit ff8da20b6f47c48d46e47f93f7a59e2d56ee9107 upstream. Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it. Link: https://lore.kernel.org/linux-hwmon/20260803183915.4ED7D1F000E9@smtp.kernel.org/ Cc: All applicable Signed-off-by: Rafael J. Wysocki Reviewed-by: Lukasz Luba Link: https://patch.msgid.link/5123895.31r3eYUQgx@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman commit c4d0c93d246945898d4ee33c42179e083b88ca0e Author: Vincent Donnefort Date: Thu Aug 6 22:13:01 2026 +0100 ring-buffer: Prevent resizing of persistent ring buffer commit 7c727dfce6be04dd009b29091a4a17d952dbfe03 upstream. Dynamically resizing a persistent ring buffer is not possible. Disable the feature. Cc: stable@vger.kernel.org Fixes: be68d63a139b ("ring-buffer: Add ring_buffer_alloc_range()") Link: https://patch.msgid.link/20260806211306.3704194-2-vdonnefort@google.com Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 004f7232e49730448f91665e76bdd7dff8e0c638 Author: Steven Rostedt Date: Sat Aug 8 09:42:15 2026 -0400 eventfs: Use children field for rcu head and add memory barriers commit f0ece16ffca7384787b692431961ce202907acf5 upstream. When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260808094215.4252430d@robin Fixes: 704f960dbee2f ("eventfs: Read ei->entries before ei->children in eventfs_iterate()") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260806022719.375354-1-shuangpeng.kernel%40gmail.com Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 74bb1eaf72d185a78c879eb2678ea500f82f46a8 Author: Shuangpeng Bai Date: Wed Aug 5 22:27:19 2026 -0400 eventfs: Fix use-after-free in eventfs_remove_rec() commit fd73b691702170d37d66f4b0278530cea8ed419a upstream. eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child. Cc: stable@vger.kernel.org Fixes: 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts") Link: https://patch.msgid.link/20260806022719.375354-1-shuangpeng.kernel@gmail.com Signed-off-by: Shuangpeng Bai Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 9f7760a2e962cbda0d096a27d394d14ad4d22928 Author: Sean Christopherson Date: Mon Jul 13 08:25:49 2026 -0700 KVM: x86/mmu: WARN and clear role.invalid when creating a child shadow page commit 5ec42d57655c690234c14aece6dd3f209778c1d8 upstream. Explicitly clear role.invalid when deriving a child shadow page's role from its parent to harden against bugs elsewhere in KVM, as violating KVM's invariant that invalid pages are NOT on the list of active MMU pages leads to use-after-free due to __kvm_mmu_prepare_zap_page() using list_add() instead of list_move() when processing an invalid shadow page, i.e. makes a bad situation far worse. Yell loudly if the parent is invalid, as it means KVM has missed a validity check, i.e. KVM is attempting to map memory using an invalid/obsolete root, but continue on as the child is otherwise still a valid shadow page. ================================================================== BUG: KASAN: slab-use-after-free in __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] Write of size 8 at addr ff11000153dd1368 by task repro/853 CPU: 1 UID: 1000 PID: 853 Comm: repro Not tainted 7.2.0-rc2-3aec122bdcaf-next-vm #5 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x4b/0x70 print_report+0x153/0x49c kasan_report+0xbc/0xf0 __kvm_mmu_get_shadow_page+0x1817/0x1860 [kvm] mmu_alloc_root+0x141/0x320 [kvm] kvm_mmu_load+0x612/0x20f0 [kvm] kvm_arch_vcpu_ioctl_run+0x3dd5/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Allocated by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x5f/0x70 kmem_cache_alloc_noprof+0xfe/0x2e0 __kvm_mmu_topup_memory_cache+0x135/0x530 [kvm] paging64_page_fault+0x318/0x1e30 [kvm] kvm_mmu_do_page_fault+0x21d/0x630 [kvm] kvm_mmu_page_fault+0x18c/0x17b0 [kvm] kvm_arch_vcpu_ioctl_run+0x1f35/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 853: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kmem_cache_free+0xe2/0x400 kvm_mmu_commit_zap_page.part.0+0x1e2/0x310 [kvm] kvm_mmu_free_roots+0x283/0x560 [kvm] kvm_arch_vcpu_ioctl_run+0x33c8/0x6150 [kvm] kvm_vcpu_ioctl+0x5e4/0x10d0 [kvm] __x64_sys_ioctl+0x131/0x1b0 do_syscall_64+0x67/0x5f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Reported-by: Hyunwoo Kim Fixes: a770f6f28b1a ("KVM: MMU: Inherit a shadow page's guest level count from vcpu setup") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit d728baba0f20e49439fc7831bf3e4e7dee82161a Author: Paolo Bonzini Date: Thu Aug 6 16:44:17 2026 +0200 KVM: SVM: Serialize accesses to the owner and mirror list with separate lock commit 1d78d33275ef2a16c6d080910b291d0a97a0e613 upstream. Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RCU critical section). It is much simpler to just use a global lock, since the critical sections are so small and the new lock is always a leaf lock. Fixes: b2125513dfc0 ("KVM: SEV: Allow SEV intra-host migration of VM with mirrors") Cc: stable@vger.kernel.org Reported-by: Shen Yongchao Link: https://lore.kernel.org/kvm/tencent_625C0F42824E542C72B34733392AF2C49709@qq.com/ Link: https://lore.kernel.org/kvm/tencent_DDC4E4352EC91CAC05A9A8F4E55E8C96730A@qq.com/ Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 79748c9f9b2f1a4ab2cdf2f9c597231f0245f6e7 Author: Frank Sorenson Date: Tue Aug 4 14:21:12 2026 -0500 smb: client: fix SMB1 TRANS2 multi-response truncation in SendReceive() commit 26fa4d17c023dbe5427a92d3a7bd9ae1d1e58bc5 upstream. When a TRANS2 response is split across multiple secondary packets, coalesce_t2() assembles the payload into the large response buffer. Two bugs cause SendReceive() to copy only a small fraction of the assembled buffer into the caller's output buffer. This manifests when listing a large directory on an SMB1 share (observed against Windows XP); the first getdents returns only partial results, and subsequent getdents returns EINVAL. Bug 1: coalesce_t2() computes the coalesced size as: *pdu_len += total_in_src; cifs_demultiplex_thread() resets *pdu_len to each secondary's own pdu_length before calling coalesce_t2(), so this accumulates from the wrong baseline on every secondary after the first. Bug 2: after reassembly, cifs_demultiplex_thread() sets mid->resp_buf_size to the final secondary's raw packet size. This value is later used as the memcpy length, so only a portion of the coalesced response is copied. Fix both by replacing the stale *pdu_len arithmetic with smbCalcSize(), which reads the BCC field that coalesce_t2() maintains correctly throughout reassembly. Fixes: 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Reviewed-by: Paulo Alcantara Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 1305eadc6a7d78a8d0a52eee29ddd2d9e8a27805 Author: Shuangpeng Bai Date: Sat Aug 1 20:48:09 2026 -0400 smb: client: Fix use-after-free in cifs_try_adding_channels() commit 4986410316b1ae0e63c6ce418e4eb196723626e7 upstream. cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access. Fixes: 6aac002bcfd5 ("cifs: failure to add channel on iface should bump up weight") Cc: stable@vger.kernel.org Signed-off-by: Shuangpeng Bai Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 5558a8312452ddb21eff22b1cbd84302ad951944 Author: Jun Yang Date: Mon Aug 10 18:21:38 2026 +0800 tipc: read le->link under the node lock in tipc_node_link_down() commit cba9ccb47e9fa4cc77692fb896cc5ab57a667882 upstream. tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch. The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6: BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992) Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL. Fixes: 73f646cec354 ("tipc: delay ESTABLISH state event when link is established") Cc: stable@kernel.org Reported-by: TencentOS Corvus AI Assisted-by: tencentos-corvus-ai:kimi-k3 Signed-off-by: Jun Yang Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260810102147.48191-1-juny24602@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 3c5f8f2aa57c647b83add4896aab64aac5fdedad Author: chanyoung Date: Tue Aug 4 14:28:35 2026 +0900 tls: don't leave a full plaintext sk_msg ring unpushed commit 7bca91d63341274e857f4aeaad54d229405e93dc upstream. When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop. Suggested-by: Sabrina Dubroca Fixes: fe1e81d4f73b ("tls/sw: Support MSG_SPLICE_PAGES") Cc: stable@vger.kernel.org Signed-off-by: chanyoung Link: https://patch.msgid.link/20260804052837.49015-2-ppoo1220@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3c837266a734e2a22b24d2d567404a501d405835 Author: Jérémy Jean Date: Tue Aug 4 12:55:28 2026 +0000 tls: rx: restore msg_iter before TLS 1.3 optimistic retry commit 1c8629651cb54f7b51db8fc0b1a9944e4a4b0f5e upstream. tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length. Fixes: ce61327ce989 ("tls: rx: support optimistic decrypt to user buffer with TLS 1.3") Cc: stable@vger.kernel.org Signed-off-by: Jérémy Jean Link: https://patch.msgid.link/20260804125528.2139928-1-Jeremy.Jean@oss.cyber.gouv.fr Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b70ebe0bba254e093dd5fd4c0c170941ce83eb85 Author: Jun Yang Date: Mon Aug 3 09:45:14 2026 +0800 vhost: reset the vring metadata cache on vring reconfiguration commit de845981da67a6b049080c87e605130b0c30adc5 upstream. vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers. vhost_copy_to_user() and vhost_copy_from_user() consume the result with __copy_to_user() and __copy_from_user(), which do not check it either, so a subsequent used ring update or descriptor fetch accesses memory outside the region the IOTLB actually maps. Reset the metadata cache whenever the vring is reconfigured, so the new addresses are pushed back through iotlb_access_ok()'s slow path. Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Cc: stable@vger.kernel.org Assisted-by: tencentos-corvus-ai:kimi-k3 Signed-off-by: Jun Yang Message-ID: <20260803014823.68623-1-juny24602@gmail.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman commit 3205b0652a37255dbb7ca8f3d942c8d8aa677c21 Author: Sun Jian Date: Mon Aug 3 22:40:39 2026 -0700 veth: fix skb length accounting after XDP frag adjustment commit cb6379feaaff11c4e1e79c26c745ffa23182768a upstream. veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_run_generic_xdp(). Unlike __skb_put(), skb_set_tail_pointer() does not require a linear skb. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. A forced-tailroom reproducer also exercises bpf_xdp_pull_data() with frags still present; the old code triggers SKB_LINEAR_ASSERT(), while this fix passes 10/10 runs. Fixes: 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb") Cc: stable@vger.kernel.org Reported-by: Mohsin Bashir Link: https://lore.kernel.org/bpf/80687d9c-9c27-494c-b3f2-efd0230b1895@gmail.com/ Suggested-by: Lorenzo Bianconi Acked-by: Lorenzo Bianconi Signed-off-by: Sun Jian Link: https://patch.msgid.link/20260804054040.613675-3-sun.jian.kdev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e82a5faea2e3886dfb2a65ce092a132e7e896915 Author: Weiming Shi Date: Wed Jul 29 12:16:55 2026 -0700 vsock/virtio: avoid refilling the RX queue after teardown commit a31e0ad444698d8aa7534a0f89fda543730f97a5 upstream. Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_device_freeze (drivers/virtio/virtio.c:658) virtio_pci_freeze (drivers/virtio/virtio_pci_common.c:601) pci_pm_freeze (drivers/pci/pci-driver.c:1098) device_suspend (drivers/base/power/main.c:1968) Kernel panic - not syncing: KASAN: panic_on_warn set ... Jump to a no-refill exit when rx_run is clear, leaving the normal exit to replenish a running queue. Fixes: b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") Cc: stable@vger.kernel.org Reported-by: Xiang Mei Link: https://lore.kernel.org/r/20260727035804.1860862-1-bestswngs@gmail.com Suggested-by: Stefano Garzarella Signed-off-by: Weiming Shi Reviewed-by: Bobby Eshleman Link: https://patch.msgid.link/f9c8c1d64cad9d262f305d02ffe164c2f900fadf.1785352330.git.bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1cecb4202afdbeddcf29d59baf596ac6ab753f7f Author: Weiming Shi Date: Wed Jul 29 12:16:54 2026 -0700 vsock/virtio: read virtqueues under worker locks commit ebac8f6b1ef0e9278afe204b8692a7479988dace upstream. Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation. Fixes: bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") Cc: stable@vger.kernel.org Reported-by: Xiang Mei Link: https://lore.kernel.org/r/20260727035804.1860862-1-bestswngs@gmail.com Signed-off-by: Weiming Shi Reviewed-by: Bobby Eshleman Link: https://patch.msgid.link/e79f68ad9284c983364fc3ac46904b6d9ef50231.1785352330.git.bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 6b4119af544996a545cf84b16f1dbce829ba0de8 Author: Baul Lee Date: Sun Aug 9 20:18:29 2026 +0900 vxlan: do not arm the ageing timer on a device that is down commit b37971686ec59fb027fa4910ba16805e68fddb97 upstream. vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq+0x154/0x18c Allocated by task 189: alloc_netdev_mqs+0x64/0x720 rtnl_create_link+0x4ac/0x520 rtnl_newlink+0x758/0xd00 Freed by task 191: netdev_release+0x40/0x58 netdev_run_todo+0x4a4/0x8c0 rtnl_dellink+0x200/0x4e8 The rtnl operations involved are netns-scoped, so an unprivileged user can perform them in a new user and network namespace. Arming the timer on a down device never had an effect: vxlan_cleanup() returns early on !netif_running(), and vxlan_open() arms the timer for any non-zero interval once the device is brought up. Add the missing test. Discovered by XBOW, triaged by Baul Lee Fixes: 40051c4dcad5 ("vxlan: Allow changing ageing time") Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260809111829.78834-1-baul.lee@xbow.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit f463b6f4957c9c3fd1c75f8d3e5af4879fa609c0 Author: Zhiling Zou Date: Mon Aug 3 20:15:32 2026 +0800 xdp: reject clones that overrun skb_shared_info tailroom commit e48e8edbef2eb824201495daa5234560f632b23c upstream. xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path. Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Link: https://patch.msgid.link/6b2afef5d1738763c6965e8e466eb16e43e4f956.1785757386.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4f4cba3947d2f0eceb32727e198ca2c149a653a9 Author: Breno Leitao Date: Mon Aug 3 02:47:40 2026 -0700 x86/mce: Set up the polling timer before CMCI discovery commit a213dfaa2596c1c0dc4dae91c14fbfa499c03223 upstream. I hit the following on one of my machines: mce: CPU0 BANK15 CMCI inherited storm ------------[ cut here ]------------ ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0 WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY RIP: 0010:debug_object_assert_init+0x18f/0x230 Call Trace: __mod_timer mce_timer_kick cmci_discover intel_init_cmci mce_intel_feature_init mcheck_cpu_init identify_cpu identify_boot_cpu arch_cpu_finalize_init start_kernel A second splat follows right after, from timer_setup() finding that same timer already queued: ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10 This is happening because CMCI storm detection is trying to modify the timer before latter was properly set up. Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(), and depends on neither the generic nor the vendor init. [ bp: Massage commit message. ] Fixes: 1f68ce2a0272 ("x86/mce: Handle Intel threshold interrupt storms") Signed-off-by: Breno Leitao Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260803-mce_timer_init-v1-1-9539db424330@debian.org Signed-off-by: Greg Kroah-Hartman commit da6acd11d2f214d355d070a4d8d46da9e1181dfc Author: Rik van Riel Date: Thu Aug 6 08:54:57 2026 -0700 x86/CPU: Add a tlbi= cmdline switch commit abe7c8b09bd72a9c726016257c6281f129b4c02d upstream. With the recently found INVLPGB / TLBSYNC issue, there has been some interest in disabling INVLPGB-based TLB flushing, in order to rule out that CPU issue as a cause of userspace crashes. Add a kernel command line option to control the TLB flushing behavior. If the need arises, we will add a "tlbi=broadcast" for the case when TLB invalidation broadcasts need to be explicitly selected, but this is not needed now yet. [ bp: Rewrite commit message, move to cpu/common.c, add documentation. ] Fixes: 767ae437a32d ("x86/mm: Add INVLPGB feature and Kconfig entry") Suggested-by: Borislav Petkov Signed-off-by: Rik van Riel Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://patch.msgid.link/20260729204341.3eb0b5ea@fangorn Signed-off-by: Greg Kroah-Hartman commit eb0a9fabb924f34350668d70ae5651f53c325777 Author: Lorenzo Stoakes (ARM) Date: Thu Jul 23 16:16:35 2026 +0100 arm64: remove redundant concurrent ptdump UAF mitigation commit 9d3277b2c07ccc9508d648098b3bbb46c61b7f3c upstream. This partially reverts commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), retaining vmalloc-huge support but eliminating the now redundant mitigation against a race between huge vmap page table freeing and ptdump, as this issue has now been fixed at core. We also simultaneously remove the arm64 if-deffery when acquiring the mmap read lock upon vmap huge page table promotion as it is no longer required. Note that this patch relies on the preceding vmalloc patch, and should not be backported alone. Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-5-8cc77dcc0018@kernel.org Fixes: fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump") Signed-off-by: Lorenzo Stoakes (ARM) Reviewed-by: Dev Jain Acked-by: Mike Rapoport (Microsoft) Acked-by: Kiryl Shutsemau (Meta) Acked-by: Will Deacon Reviewed-by: David Hildenbrand (Arm) Cc: Andy Lutomirski Cc: "Borah, Chaitanya Kumar" Cc: "Borislav Petkov (AMD)" Cc: Catalin Marinas Cc: Dave Hansen Cc: David Carlier Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Liam R. Howlett Cc: Michal Hocko Cc: Peter Zijlstra Cc: Ryan Roberts Cc: Shakeel Butt Cc: Suren Baghdasaryan Cc: Toshi Kani Cc: "Uladzislau Rezki (Sony)" Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 2926031acba100d0c18fcfaa7a2ed29609318848 Author: Hidayath Khan Date: Thu Jul 30 14:42:27 2026 +0200 dibs: initialise dibs->lock in dibs_dev_alloc() commit c27e360545373b7aee9862a5beef3b9fb3df0c25 upstream. dibs->lock is initialised by dibs_dev_add(), but a dibs device can already take interrupts before that call: ism_probe() runs ism_dev_init(), and hence request_irq(), before it calls dibs_dev_add(). No client can have registered a dmb at that point, so no dmb interrupt can occur, but a GID event interrupt can, and ism_handle_irq() takes dibs->lock unconditionally on entry, before it inspects anything else. Initialise the lock in dibs_dev_alloc() instead, so that it is valid as soon as a driver can publish the device to its interrupt handler. Fixes: cc21191b584c ("dibs: Move data path to dibs layer") Cc: stable@vger.kernel.org Reviewed-by: Alexandra Winter Signed-off-by: Hidayath Khan Link: https://patch.msgid.link/20260730124227.167829-1-hidayath@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 496846a9411136eb9e86ad4f4e62d751bd1e1db5 Author: Asad Kamal Date: Thu Jul 30 15:00:00 2026 +0800 Revert "drm/amdgpu: fix aperture mapping leak" commit b96c529cd2551b78316a4afa3237b2ed96ba03c8 upstream. devres teardown is LIFO. The aperture devres node was registered after the DRM device node, so devres_release_all() unmaps the aperture before the DRM device release callback fires amdgpu_device_fini_sw(). IP sw_fini callbacks (e.g. vcn_v4_0_sw_fini) write to fw_shared through a pointer derived from aper_base_kaddr, causing a kernel page fault on probe failure / rollback: BUG: unable to handle page fault ... PMD 0 RIP: vcn_v4_0_sw_fini+0x7b/0x170 [amdgpu] Call Trace: amdgpu_device_fini_sw amdgpu_driver_release_kms devm_drm_dev_init_release devres_release_all This reverts commit d871e99879cb5fd1fa798b006b4888887e63a17a. Fixes: d871e99879cb ("drm/amdgpu: fix aperture mapping leak") Reported-by: Yuansheng Mao Signed-off-by: Asad Kamal Reviewed-by: Lijo Lazar Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher (cherry picked from commit 336e0cd576817ac64a4b394ca2b3680029f3e37f) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 047f927f54c6c17593e93aafe82dcb7acdda2a71 Author: Christian Brauner Date: Sun Aug 2 20:00:44 2026 +0200 binfmt_misc: don't warn when the mount is completed from another user namespace commit 79fdf39f1a31f88cb3833b6f8091fbf6acdca2c6 upstream. fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in bm_fill_super(): create a user and a mount namespace in a child, call fsopen("binfmt_misc") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc] CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn Call Trace: get_tree_keyed+0x7d/0xb0 bm_get_tree+0x34/0x90 [binfmt_misc] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. Nothing in bm_fill_super() depends on the two namespaces matching, it derives everything from sb->s_user_ns. Fixes: 21ca59b365c0 ("binfmt_misc: enable sandboxed mounts") Cc: stable@vger.kernel.org # v6.7+ Link: https://patch.msgid.link/20260802-work-fill_super-warn-v1-2-4e987911a39a@kernel.org Reviewed-by: Jan Kara Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 42d99fcd8006007e2f708bede6789f37f3910b30 Author: Christian Brauner Date: Sun Aug 2 20:00:43 2026 +0200 ovl: don't warn when the mount is completed from another user namespace commit 63981fc786daaa626cb14d9be1406f674d79f98f upstream. fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in ovl_fill_super(): create a user and a mount namespace in a child, call fsopen("overlay") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay] CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn Call Trace: get_tree_nodev+0x71/0xa0 ovl_get_tree+0x15/0x20 [overlay] vfs_get_tree+0x2a/0x100 vfs_cmd_create+0x60/0xf0 __do_sys_fsconfig+0x4b2/0x500 The child needs the mount namespace because fsopen() itself gates on may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning the caller's mount namespace. fsconfig() doesn't repeat that check. It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be raised in a loop to taint the kernel and flood the log, and it panics a kernel booted with panic_on_warn. Keep refusing the mount and stop warning about it. ovl_parse_param() already spells a user namespace check this way for Opt_override_creds. Fixes: 1784fbc2ed9c ("ovl: port to new mount api") Cc: stable@vger.kernel.org # v6.5+ Link: https://patch.msgid.link/20260802-work-fill_super-warn-v1-1-4e987911a39a@kernel.org Reviewed-by: Jan Kara Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 2e8df8c9190335475a3b64a159d3efd8cdd1cb73 Author: Hyunjung Ko Date: Thu Aug 6 19:12:52 2026 +0900 net/sched: act_gact, act_police: range check the fallback control action commit 883b56ae58fe657d8497806c7059646e9ba6dbd0 upstream. tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none. Fixes: 720f22fed81b ("net: sched: refactor reinsert action") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Hyunjung Ko Acked-by: Jamal Hadi Salim Tested-by: Victor Nogueira Link: https://patch.msgid.link/20260806101252.809593-1-hj351016@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 439d3e404f9d5e515911cc8132cde198b337c19e Author: Hyunjung Ko Date: Thu Aug 6 19:12:34 2026 +0900 net/sched: act_ct: fix sk_buff leak when the header checks reject a packet commit 8a7ed561671aa6a911a2de99e59ef670a4d0b1df upstream. tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packet, unbounded. Note the drop counter is already incremented for these errors, so the statistics claim a drop that never happens. Three different ownership states reach out_frag: today - the skb may be queued by the defrag engine (-EINPROGRESS), already freed by nf_ct_handle_fragments(), or still owned by us. Tell the caller which of those it is, and free the packet ourselves in the last case, which restores the TC_ACT_SHOT behaviour that predated the Fixes: commit. Reproduced on v7.2-rc6 with a 54-byte frame carrying a 40-byte IPv6 header with nexthdr = 0 (hop-by-hop) and nothing after it, on a clsact ingress chain with "action ct". kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet; with this patch it reports none. Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags") Cc: stable@vger.kernel.org # v6.8+ Signed-off-by: Hyunjung Ko Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260806101235.809370-1-hj351016@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 24d87dc28ddd3771dd0e88719209811809729439 Author: Yangyu Chen Date: Sun Aug 2 23:46:38 2026 +0800 net: atlantic: free RX pages of consumed but not refilled buffers commit e8e7471ef686b6c002218fee9671cc61992ae01a upstream. aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to hardware. Since the page reuse strategy was added, a cleaned RX buffer keeps its page (and its DMA mapping) in the ring for reuse, and refill is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES slots are free. Slots that were consumed but not yet reposted therefore sit in the complementary [sw_tail, sw_head) gap with a live page, and the deinit walk never visits them: up to a refill batch worth of pages and DMA mappings leak on every interface down. Walk the whole ring instead and release whatever is still there. Also bail out if the buffer ring is already gone: a partial aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so aq_ptp_ring_deinit() still gets here on the unwind path. Cc: stable@vger.kernel.org # v5.2+ Fixes: 46f4c29d9de6 ("net: aquantia: optimize rx performance by page reuse strategy") Reviewed-by: Sukhdeep Singh Signed-off-by: Yangyu Chen Acked-by: Mina Almasry Link: https://patch.msgid.link/tencent_607CBA8237DA438E36B844318B21538DE008@qq.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit dd633280de7fdfd60dc4fcf63d04e2ad95b43269 Author: Yangyu Chen Date: Sun Aug 2 23:46:00 2026 +0800 net: atlantic: free stranded TX buffers on ring deinit commit 452636ea5410a96e02ebaaf80b21e3620b98e0dd upstream. aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean() call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and stops at hw_head, which no longer moves once aq_vec_stop() has stopped the hardware and NAPI. Completed descriptors beyond the budget and everything still posted in [hw_head, sw_tail) keep their skb or xdp_frame when the interface goes down: aq_vec_ring_free() then frees the buffer ring and the references are lost for good. Today this is a silent memory leak on every interface down under TX/XDP_TX load. With the conversion of the RX path to page_pool posted for net-next it becomes much more visible: XDP_TX frames carry fragment references on the RX ring's page_pool, so a single stranded frame keeps the pool's inflight count above zero forever. page_pool_destroy() then never completes, the pool is leaked together with its pages, and "page_pool_release_retry() stalled pool shutdown" is warned every 60 seconds from that point on, on every ifdown, XDP detach or ring resize under XDP_TX load. Bring back aq_ring_tx_deinit() as it was before the removal and use it for teardown again, with one extension: TX rings can hold xdp_frames nowadays, so release those too. They are returned with xdp_return_frame() since this runs in process context. Fixes: eb36bedf28be ("net: aquantia: remove function aq_ring_tx_deinit") Cc: stable@vger.kernel.org # v4.11+ Reviewed-by: Sukhdeep Singh Signed-off-by: Yangyu Chen Acked-by: Mina Almasry Link: https://patch.msgid.link/tencent_EEDC35FAF2750A3A6A0B39BAE0E2C484860A@qq.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c0224327b7cbed9d3198e8dbec847281053dcd06 Author: Zihan Xi Date: Sat Aug 1 14:27:17 2026 +0000 netfilter: nf_conntrack: defer invalid log until after unlock commit 2d19b95c9723001f214f7a47d67b09f46238f200 upstream. TCP and SCTP conntrack paths can emit invalid-packet logs while ct->lock is still held. When invalid logging is routed to nfnetlink_log and conntrack export is enabled, the log path can re-enter conntrack netlink glue and dump the same conntrack again. Protocol attribute dumping may take ct->lock, so logging while holding that lock can deadlock. Defer the TCP invalid logs by storing only the minimal log context while ct->lock is held and emitting the log after unlocking. Also make the TCP timeout-lowering invalid path return whether a log is needed, then emit that log after unlocking. Do the same for the SCTP invalid state-transition log that can be reached while ct->lock is held. Add a lockdep assertion to nf_ct_l4proto_log_invalid() so future callers that log invalid conntracks while holding ct->lock are caught outside TCP and SCTP as well. Fixes: 628d694344a0 ("netfilter: conntrack: reduce timeout when receiving out-of-window fin or rst") Fixes: d9a6f0d0df18 ("netfilter: conntrack: prepare tcp_in_window for ternary return value") Fixes: f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 7cff440d702616022769f2643168d7f9820547a0 Author: Zhiling Zou Date: Fri Jul 31 14:36:53 2026 +0800 netfilter: bridge: release template ct on non-IP path commit d45cc8020d7c0a9f01dee42ff5c40bc14c9af72f upstream. A bridge nftables ct zone set rule can attach a conntrack template to an skb before nf_ct_bridge_pre() sees it. For non-IPv4 and non-IPv6 EtherTypes, nf_ct_bridge_pre() currently overwrites skb->_nfct with IP_CT_UNTRACKED without releasing the existing template reference. That makes the per-cpu template, and any temporary templates allocated for concurrent use, unreachable and leaks memory until the host runs out of slab. Reset the skb conntrack state before marking the frame untracked so the existing template reference is dropped on the non-IP path. Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 755fd7843f300d724caceabdf9bb13adc8701540 Author: Koichiro Den Date: Thu Aug 6 12:25:37 2026 +0900 NTB: ntb_netdev: Preserve RX queue depth on allocation failure commit d2121faf133ac3bf9531b53a7e21273649a08517 upstream. ntb_netdev_rx_handler() hands the received skb to the network stack before allocating its replacement. If the allocation fails, nothing is reposted. Every failure therefore takes one buffer out of the RX queue while the interface remains up, and enough failures eventually stall reception. A retry path could refill the queue later, but ntb_netdev has none. Allocate the replacement first instead. If that fails, drop the packet and repost the same skb. This keeps the queue full and lets packet delivery resume as soon as memory is available again. Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device") Cc: stable@vger.kernel.org Signed-off-by: Koichiro Den Reviewed-by: Dave Jiang Link: https://patch.msgid.link/20260806032537.3526498-1-den@valinux.co.jp Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit ed08011ae0be88f16cceae190535d6c790c83b0c Author: Pavel Begunkov Date: Mon Jul 27 12:19:37 2026 +0100 net: devmem: prevent net-iov / page mixing commit 53a43508ee332d8bffe40590c3d189c92a551f9f upstream. We should either have net_iov or page backed frags in a single skb, otherwise it blows up down the stack. Don't allow mixing in zerocopy_fill_skb_from_devmem(). Fixes: bd61848900bff ("net: devmem: Implement TX path") Cc: stable@vger.kernel.org Signed-off-by: Pavel Begunkov Acked-by: Stanislav Fomichev Reviewed-by: Mina Almasry Reviewed-by: Bobby Eshleman Link: https://patch.msgid.link/e3199788c4732545627a4721097ebb71ad737bab.1785150502.git.asml.silence@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e92c7e2b41d1528a830bc64c5e4e46dfa8133dda Author: Baul Lee Date: Mon Jul 27 07:03:42 2026 +0900 net/x25: fix use-after-free of the socket by its timers commit 2195424c3da2ef1829a63b807e3a900a90e57d85 upstream. The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU. x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close(). timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect(). Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer(). Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains. Discovered by XBOW, triaged by Baul Lee Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260726220342.47245-1-baul.lee@xbow.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7a1df20a8d2cc89e3a442b6e0b43b1cacde8d403 Author: Alexandra Winter Date: Mon Aug 10 13:14:32 2026 +0200 net/dibs: Correct freeing of dmb_clientid_arr commit 9e6869be49064915edb6c8776b27c376cfdb0df5 upstream. A dibs device interrupt handler can be active after dibs_dev_del() and may still access dmb_clientid_arr. (UAF) In case of a failure in dibs_dev_add() being called by dibs_lo_dev_probe() dmb_clientid_arr is freed twice (double free). Free dmb_clientid_arr in dibs_dev_release() after last reference is gone. Note that allocating in dibs_dev_add() instead of dibs_dev_alloc() is ok for now, because no dmbs can be registered before dibs_dev_add(). Fixes: cc21191b584c ("dibs: Move data path to dibs layer") Cc: stable@vger.kernel.org Co-developed-by: Hidayath Khan Signed-off-by: Hidayath Khan Signed-off-by: Alexandra Winter Reviewed-by: Dust Li Link: https://patch.msgid.link/20260810111432.2334900-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 14e812ab41df0cac033479da835ec9a5de633404 Author: Kyle Zeng Date: Mon Aug 3 12:27:57 2026 +0000 ipv6: prevent in6_dev_get() from resurrecting inet6_dev commit 0e243671bc7b8eaf00f83dd2f4367436dc0cff98 upstream. in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally increments its refcount. Device teardown can clear the pointer and drop the last reference between these operations. The increment then resurrects an object whose RCU free has already been queued, so callers can use it after it is freed. Use refcount_inc_not_zero() and return NULL when the object has already reached zero. RCU keeps the memory accessible through the attempted reference acquisition, and a successful increment pins the object for the caller. An independent run on the exact unpatched 6f5156d7a31a (v7.2-rc3) kernel reproduced the invalid reference acquisition as UID 1000: refcount_t: addition on 0; use-after-free. ip6_mc_source+0xef4/0x17e0 It was followed by the corresponding reference underflow in ip6_mc_source(). The supplied trace from the same unpatched revision additionally shows the access after the RCU read-side section ends: BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0 Write of size 8 at addr ffff888015b50240 by task poc/1219 Bug found and triaged by OpenAI Security Research and validated by Trail of Bits. Fixes: 8814c4b53381 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.") Cc: stable@vger.kernel.org Signed-off-by: Kyle Zeng Co-developed-by: David Lee Signed-off-by: David Lee Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4515c78f4d9fd577270f012efeb062ea58b3682d Author: Daming Li Date: Thu Jul 30 22:55:52 2026 +0800 net: smc: fix splice entry lifetime imbalance in smc_rx_splice commit 5d9686af2976741bbd79b150d1c9e60b81e7f12e upstream. smc_rx_splice() passes pages to splice_to_pipe() before taking the references that cover the lifetime of each splice entry. In the VM-backed RMB path, splice_to_pipe() may drop unqueued entries through smc_rx_spd_release(), while queued entries are released later via the pipe buffer callback. The old post-splice accounting also derives the number of queued VM pages from an offset mutated while building the descriptor, and a multi-page splice pairs one sock_hold() with multiple sock_put() calls. Take the page and socket references for every candidate entry before splice_to_pipe(), and drop the matching private state, page reference, and socket reference from smc_rx_spd_release() for entries that never get queued. This fixes a refcount imbalance that can underflow page refcounts and trigger a use-after-free. Fixes: 9014db202cb7 ("smc: add support for splice()") Cc: stable@vger.kernel.org Reported-by: Vega Co-developed-by: Xiao Liu Signed-off-by: Xiao Liu Signed-off-by: Daming Li Signed-off-by: Ren Wei Reviewed-by: Dust Li Reviewed-by: Sidraya Jayagond Link: https://patch.msgid.link/20260730145552.360287-2-enjou1224z@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit aa03d76252cc7265ddda89a267b14a6b1b3dc923 Author: Ahmed Naseef Date: Tue Aug 4 15:35:11 2026 +0400 net: phy: mediatek: fix TX blink masks using the RX bits commit f684c514f7965385dae21f2535f99938e73ec1af upstream. MTK_GPHY_LED_TX_BLINK_SET and MTK_2P5GPHY_LED_TX_BLINK_SET are built from the RX blink bits instead of the TX ones, so both TX masks are identical to their RX counterparts. The TX bits they should be using, MTK_PHY_LED_BLINK_{10,100,1000,2500}TX, are otherwise only referenced by the per-speed branch of mtk_phy_led_hw_ctrl_set(). A TX trigger selected without a link trigger therefore programs the RX blink bits, and the LED blinks on received traffic. The masks are also used to decode the blink register in mtk_phy_led_hw_ctrl_get(), which as a result cannot tell the two triggers apart: an RX-only configuration reads back as RX and TX, and a TX-only configuration reads back as neither. Fixes: 7f9c320c98db ("net: phy: mediatek: Move LED helper functions into mtk phy lib") Cc: stable@vger.kernel.org Signed-off-by: Ahmed Naseef Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260804113511.3371248-1-naseefkm@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit ab7e4b407c7f58d1a003134eff3841f303d5ccc2 Author: Lorenzo Stoakes (ARM) Date: Thu Jul 30 11:55:47 2026 +0100 mm/huge_memory: fix huge_zero_pfn race commit 33192a26cddea7a7e4ca66e5c3eebd36fa8be2bb upstream. Patch series "mm/huge_memory: fix huge_zero_pfn race", v2. There is a subtle race in the reference-counted huge_zero_folio implementation. The fast path atomic logic fails to account for the fact that the shrinker (which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a racing get_huge_zero_folio() installed a valid value there. This results in huge_zero_folio being correctly set but huge_zero_pfn being set incorrectly and thus is_huge_zero_pfn() and consequently is_huge_zero_pmd() will misidentify the huge zero folio as being an ordinary THP folio. This can result in the huge zero folio being split and otherwise treated incorrectly. The solution to this is very subtle as there is an atomic fast path, and thus ordering in weakly ordered architectures has to be treated very carefully. The first commit fixes the issue by introducing a spinlock around huge_zero_[pfn, folio, refcount] write, with careful consideration paid to load/store ordering in the fast path. It is placed first and kept as small as possible so that it can be backported on its own. The second commit is a pure cleanup which reworks the CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent logic from the dynamically allocated one. This patch (of 2): If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted by huge_zero_refcount and returned by mm_get_huge_zero_folio(). When the caller is done with the huge zero page, its reference count is decremented. Only a shrinker can set the reference count to zero. A race can unfortunately occur between a shrinker decrementing the reference count to zero and a concurrent page fault. This is because shrink_huge_zero_folio_scan() might, if very unlucky, be preempted between setting huge_zero_refcount to zero and writing an invalid value. During this time get_huge_zero_folio() could write to huge_zero_pfn before shrink_huge_zero_folio_scan() resumes. In this event the huge zero folio will be persistently misidentified causing the THP code path to be entered inappropriately for the huge zero folio: CPU 0 CPU 1 =======================================|================================= shrink_huge_zero_folio_scan() | atomic_cmpxchg() sets refcount to 0 | xchg() sets huge_zero_folio to NULL | get_huge_zero_folio() | | atomic_inc_not_zero() -> zero preempted for a long time | Allocate new huge zero folio | | Write valid huge_zero_folio v | Write valid huge_zero_pfn Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite! This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly returning false for a huge zero page which could result in issues like the huge zero folio being incorrectly split. Note that the issue is with huge_zero_pfn not huge_zero_folio, as get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set huge_zero_folio. Fix the issue by introducing a spinlock, huge_zero_lock, to prevent concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount. There needs to be significant care taken here to ensure correctness: The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which is outside of the critical section, and means huge zero allocation is gated on zero huge_zero_refcount. The fast path doesn't use huge_zero_lock, so the critical section is irrelevant to it. So invariants are required - huge_zero_refcount MUST: * Only be set in the huge_zero_lock critical section to ensure serialisation of huge_zero_pfn, huge_zero_folio and huge_zero_refcount writes. * Be set non-zero only AFTER huge_zero_[pfn, folio] are set to valid values so installation of the huge zero folio on read page fault ensures concurrent is_huge_zero_*() calls correctly identify the huge zero folio. * Be set zero only BEFORE huge_zero_[pfn, folio] are set to NULL and ~0UL respectively, and atomically. Establish these by: * Only setting huge_zero_refcount to zero or an absolute value in the huge_zero_lock critical section in get_huge_zero_folio() and shrink_huge_zero_folio_scan(), and always updating atomically there and elsewhere. * Using atomic_set_release(&huge_zero_refcount) in get_huge_zero_folio() after huge_zero_[pfn, folio] are set. This is paired with atomic_inc_not_zero() to ensure atomic_inc_not_zero() only observes a non-zero value if huge_zero_[pfn, folio] are set. * Using atomic_cmpxchg() in shrink_huge_zero_folio_scan() (as before) to ensure that it is set zero only when equal to 1 and set atomically. * atomic_cmpxchg() being fully ordered ensures this is done prior to huge_zero_[folio, pfn] being set to NULL and ~0UL respectively. Eliminate the retry loop in get_huge_zero_folio() as the atomic_cmpxchg() in shrink_huge_zero_folio_scan() is now performed under the lock, and replace with an equally locked atomic_inc() to set the reference count should the caller be raced on huge zero folio installation. folio_put() naturally implies a full memory barrier so its ordering is maintained correctly. The huge zero folio also cannot be released except when the shrinker does so as it is non-LRU and non-rmappable. Note that only the huge zero shrinker (via shrink_huge_zero_folio_scan()) can actually set huge_zero_refcount to zero, which is the count of mm's which have at least one huge zero folio installed plus one shrinker pin. Additionally convert a BUG_ON() to a VM_WARN_ON_ONCE(). Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-0-c5d8a41b317f@kernel.org Link: https://lore.kernel.org/20260730-fix-refcounted-huge-zero-v2-1-c5d8a41b317f@kernel.org Fixes: 3b77e8c8cde5 ("mm/thp: make is_huge_zero_pmd() safe and quicker") Signed-off-by: Lorenzo Stoakes (ARM) Reported-by: Hengbin Zhang Closes: https://lore.kernel.org/linux-mm/20260727154001.4102341-1-uqbarz@gmail.com/ Suggested-by: David Hildenbrand (Arm) Acked-by: David Hildenbrand (Arm) Cc: Baolin Wang Cc: Barry Song Cc: Dev Jain Cc: Hannes Reinecke Cc: Hugh Dickins Cc: Kiryl Shutsemau Cc: Lance Yang Cc: Liam R. Howlett Cc: Nico Pache Cc: Pankaj Raghav Cc: Ryan Roberts Cc: Yang Shi Cc: Zi Yan Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit d858f7c9fc514f1d9d3be7d00b2dd4e2f2383b55 Author: Matt Fleming Date: Sat Jul 25 11:14:19 2026 +0100 mm/huge_memory: initialise workingset state before folio split commit aca1f2d5de17e138bc6c4859126b77e516b82541 upstream. xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state. Link: https://lore.kernel.org/20260725101419.3938406-1-matt@readmodwrite.com Fixes: 58729c04cf10 ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()") Signed-off-by: Matt Fleming Reported-by: syzbot+c5b060ce82921a2fd500@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c5b060ce82921a2fd500 Reviewed-by: Zi Yan Acked-by: David Hildenbrand (Arm) Cc: Baolin Wang Cc: Barry Song Cc: Dave Chinner Cc: Dev Jain Cc: Kairui Song Cc: Lance Yang Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Matthew Wilcox (Oracle) Cc: Muchun Song Cc: Nico Pache Cc: Roman Gushchin Cc: Ryan Roberts Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit ad4e9dd5fec7a322a471ff36fb9c76214e3c6992 Author: Hui Su Date: Wed Aug 12 01:39:03 2026 +0800 tracing: Fix NULL pointer dereference in module event cache removal commit b69859204d4db3acd86c1c2dadcef0d77b451933 upstream. A module-only event filter such as ":mod:foo" is cached with a NULL event_mod->match when foo has not been loaded. If a later write tries to remove a specific match from the same module, remove_cache_mod() passes the NULL cached match to strcmp(), causing a NULL pointer dereference. The issue can be reproduced from userspace: echo ':mod:trace_events_kunit_missing' > /sys/kernel/tracing/set_event echo '!foo_bar:mod:trace_events_kunit_missing' >> /sys/kernel/tracing/set_event The second write must be a concatenation (">>") to not include O_TRUNC as that would cause ftrace_clear_events() to clear the cached modules lines. The crash was reproduced on x86_64 QEMU while KUnit workers contended on the event tracing path: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode RIP: 0010:strcmp+0x10/0x30 Call Trace: __ftrace_set_clr_event_nolock+0x373/0x4a0 ftrace_set_clr_event+0xf0/0x180 ftrace_event_write+0xdf/0x110 vfs_write+0xf6/0x440 ksys_write+0x68/0xe0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Check event_mod->match before comparing it, consistent with the existing NULL checks for the cached system and event fields. The mismatched removal continues to return -EINVAL; a broad cached module filter is removed with "!:mod:". Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260811173902.1927376-2-sh_def@163.com Fixes: b355247df104 ("tracing: Cache \":mod:\" events for modules not loaded yet") Reported-by: syzbot+4d3143c8e28f6266c636@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/6a7a6b7f.9c11d2ce.289b96.00f8.GAE@google.com/ Signed-off-by: Hui Su Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 7568e9e717e7540bd05bcc007f5d76fcaff3cdff Author: Vincent Donnefort Date: Thu Aug 6 22:13:02 2026 +0100 ring-buffer: Prevent subbuf order change when resizing is disabled commit bf98d7b0d5a99991e47e66cee4eb1d3fa514be97 upstream. Because ring_buffer_subbuf_order_set() frees buffer pages, we can't allow it when resizing is disabled. A non-consuming reader is at risk of use-after-free (rb_advance_iter()). Return -EBUSY on resize_disabled, matching ring_buffer_resize() behaviour. Cc: stable@vger.kernel.org Fixes: f9b94daa542a ("ring-buffer: Set new size of the ring buffer sub page") Link: https://patch.msgid.link/20260806211306.3704194-3-vdonnefort@google.com Reported-by: syzbot+e0cc44465d6bae735679@syzkaller.appspotmail.com Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 9ea879862e66e354e616028c31b39aa3eb6d35d8 Author: Rik van Riel Date: Fri Aug 7 22:19:56 2026 -0400 fbdev: bitblit: bound-check glyph index in bit_cursor() commit e033cbf3975a8465f879ebd5989dc35b04423a4d upstream. bit_cursor() fetches the glyph under the cursor with c = scr_readw(vc_pos); src = vc_font.data + ((c & charmask) * w * height); where charmask is 0x1ff when vc_hi_font_mask is set. The screen buffer value comes directly from scr_readw() and may be larger than the current font's glyph count. Syzkaller triggers this via vcs_write(). The Call Trace shows vcs_write() in vc_screen.c writing an arbitrary 16-bit value with writev() to /dev/vcsa, which vcs_write_buf() in vc_screen.c stores via vcs_scr_writew() without checking charcount. The stored value is later read in bit_cursor() in bitblit.c. When the font is changed from a font with 512 glyphs to a font with 256 glyphs, the screen buffer can retain characters with the high bit set from the previous mode, which could also produce the same out-of-bounds access. BUG: KASAN: global-out-of-bounds in soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 Read of size 16 at addr ffff800086c57970 Call Trace: soft_cursor+0x378/0x6bc drivers/video/fbdev/core/softcursor.c:70 bit_cursor+0xa90/0x1108 drivers/video/fbdev/core/bitblit.c:365 fbcon_cursor+0x344/0x498 drivers/video/fbdev/core/fbcon.c:1427 hide_cursor+0xdc/0x2d0 drivers/tty/vt/vt.c:883 update_region+0x100/0x18c drivers/tty/vt/vt.c:669 vcs_write+0x8ec/0xaf0 drivers/tty/vt/vc_screen.c:685 bit_putcs_aligned() and bit_putcs_unaligned() already clamp the glyph index to vc_font.charcount. Apply the same clamp in bit_cursor() after extracting the attribute and masking, before indexing fontdata. The fix completes the bounds checking started in commit 18c4ef4e765a ("fbdev: bitblit: bound-check glyph index in bit_putcs*"), which missed the cursor path. This change should be safe because the clamp reuses the existing contract from fbcon: charcount is maintained under console_lock in con_font_set() and fbcon_font_set(), and hi_font_mask is cleared when switching from 512 to 256 glyphs. When stale screen data with high bits remains after a font switch, or when vcs_write() stores an arbitrary value, clamping the index to 0 prevents the out-of-bounds read without changing cursor semantics — the same fallback bit_putcs uses. Reported-by: syzbot+61b1db46218109869c14@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=61b1db46218109869c14 Link: https://lore.kernel.org/all/6a75205c.01d0871a.3a0d52.0032.GAE@google.com/ Fixes: 18c4ef4e765a ("fbdev: bitblit: bound-check glyph index in bit_putcs*") Cc: stable@vger.kernel.org Assisted-by: Hermes:muse-spark-1.2 syzkaller Signed-off-by: Rik van Riel Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit f128740f39ab28d1f4ad5bdd10f3e117eec0c374 Author: Michael Wu Date: Mon Aug 10 14:32:30 2026 +0800 tracing: Fix race between update_event_fields and, event_define_fields commit c3730b8373bb5059d735509b9e6a00d7eb337d7c upstream. The following sequence may leads race between event_define_fields() and update_event_fields(): CPU0 (loads module A) CPU1 (loads module B) =============================== =============================== load_module(A) load_module(B) notifier_call_chain notifier_call_chain trace_module_notify trace_module_notify mutex_lock(&event_mutex) trace_event_update_all() trace_module_add_events(A) down_write(&trace_event_sem) __register_event(call_A) __add_event_to_tracers(call_A) event_define_fields(call_A) for each f: list_for_each_entry(field, list_add(&f->link, &class->fields, link) &class->fields) field = class->fields->next; Where access to the class->fields is not protected by the event_mutex in trace_event_update_all(). This produces the following panic: Unable to handle kernel access ... at virtual address 0000000000000018 pc : update_event_fields+0xf8/0x368 Call trace: update_event_fields+0xf8/0x368 trace_event_update_all+0x7c/0x2b4 trace_module_notify+0x4c/0x1dc notifier_call_chain+0x84/0x168 blocking_notifier_call_chain_robust+0x64/0xd4 load_module+0x10c8/0x123c __arm64_sys_finit_module+0x230/0x31c Fix by taking event_mutex in trace_event_update_all() before trace_event_sem. Cc: stable@vger.kernel.org Fixes: b3bc8547d3be ("tracing: Have TRACE_DEFINE_ENUM affect trace event types as well") Link: https://patch.msgid.link/2e5730d2-c631-da41-3a3a-ae35bb4895f3@allwinnertech.com Signed-off-by: Michael Wu Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 1e7abfeb23c12bf46f6457e4a3e1a1a300d50619 Author: Aditya Chillara Date: Fri Aug 7 18:11:52 2026 +0530 perf/core: Fix group leader use-after-free after sibling detach commit 42c5ca1f0a288a52878bd72a5595b08261057438 upstream. perf_group_detach() handles leader and sibling detach differently. When the group leader is detached, all siblings are promoted to singleton events and their group_leader pointer is reset to themselves. When a sibling is detached, it is removed from the leader's sibling_list, but its group_leader pointer is left pointing at the old leader. That is harmless when the sibling is being closed and freed immediately, as in the DETACH_DEAD path. It is not safe when the sibling is detached but kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the sibling is removed from the context, while its file descriptor can still keep it alive. A typical failing sequence is: - A group contains leader L and sibling S. - CPU hot-unplug detaches S with DETACH_GROUP, removing it from L->sibling_list but leaving S->group_leader == L. - L is later closed and freed. - A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and dereferences the freed leader. This was reproduced by running the perf event fuzzer, CPU hotplug, and a stress workload concurrently: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT pc : perf_ioctl+0x34c/0xc68 x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908) Call trace: perf_ioctl+0x34c/0xc68 (P) __arm64_sys_ioctl+0xa0/0xf4 invoke_syscall+0x58/0xe4 el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x40/0xc0 el0t_64_sync_handler+0x68/0xdc el0t_64_sync+0x1c4/0x1c8 The fault happened in perf_ioctl(), where perf_event_for_each() follows the stale group_leader pointer and perf_event_for_each_child() then dereferences the freed leader's context. Fix the use-after-free by promoting the detached sibling to a singleton. Also fix __event_disable() cgroup accounting and event state change. Fixes: 8a49542c0554 ("perf_events: Fix races in group composition") Assisted-by: PatchWise:gpt-5.5 Signed-off-by: Aditya Chillara Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Dapeng Mi Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260807-fix-group-leader-uaf-v3-1-b0c2310c9a0d@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman commit c22a45817b9c92aa0391db60e2ed467c7e6027d7 Author: Maíra Canal Date: Tue Jul 28 23:09:22 2026 -0300 drm/v3d: Serialize the scheduler timeout handlers commit 4da94744707b27a3ae1197bdd7127da4505dc5b1 upstream. V3D exposes several independent hardware queues (BIN, RENDER, TFU and CSD) but has only a single, global reset. A timeout on any one queue therefore has to stop, reset and restart the schedulers of every other queue as well. That makes concurrent timeout handlers unsafe. `reset_lock` was never able to make them safe, as a driver-side lock can only cover the driver's &drm_sched_backend_ops.timedout_job callback. The scheduler handles the timed out job and its pending list around that callback, outside of the driver's control, so a global reset triggered by one queue can still interfere with another queue that is in the middle of handling a timeout of its own. Consequently, if a reset happens in the CSD queue while a CL-intensive application is running, the global reset stops and restarts the CL queue's scheduler while that queue is handling a timeout of its own. As drm_sched_stop() and drm_sched_start() subtract and add the credits of every job sitting on the pending list of the scheduler they are called on, and as the CL queue's handler concurrently takes its job off that same list and puts it back, the stop and the start no longer see the same set of jobs. The CL queue is left with more credits in flight than its limit: [ 327.302739] ------------[ cut here ]------------ [ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] [ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT [ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched] [ 327.302984] Call trace: [ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P) [ 327.302997] process_scheduled_works+0x180/0x3d0 [ 327.303010] worker_thread+0x268/0x3e8 [ 327.303016] kthread+0x140/0x250 [ 327.303022] ret_from_fork+0x10/0x20 [ 327.303031] ---[ end trace 0000000000000000 ]--- From that point on, the credit count of the CL queue is broken, causing a complete GPU hang and UI freeze. The DRM scheduler already provides a mechanism to serialize the timeout handlers of different schedulers: an ordered workqueue passed as drm_sched_init()'s @timeout_wq parameter. By default, each scheduler queues its timeout work on the system workqueue, which runs the handlers concurrently. Give all of the queues a shared ordered workqueue instead, as recommended by the DRM scheduler documentation for hardware that has distinct queues but resets globally. Cc: stable@vger.kernel.org # 6.15 Reviewed-by: Iago Toral Quiroga Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com Signed-off-by: Maíra Canal Signed-off-by: Greg Kroah-Hartman commit a5548ce916594c811bd90ce33d67baa3557a6791 Author: Baul Lee Date: Tue Aug 4 21:36:25 2026 +0900 ALSA: us144mkii: re-anchor capture URBs on resubmission commit 2615f0fb90df8cf5a96133ca4be74294ed288604 upstream. capture_urb_complete() resubmits each capture URB without anchoring it: usb_get_urb(urb); ret = usb_submit_urb(urb, GFP_ATOMIC); Anchoring is a property of a submission, not of the URB. The giveback path calls usb_unanchor_urb() before urb->complete(), so an URB resubmitted from its own completion handler is off the anchor. The capture URBs are anchored once, at stream start, so from the first completion onward tascam->capture_anchor is empty. tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor) to reap the capture URBs before anything is freed. With the anchor empty those calls return immediately and the URBs stay queued on the host controller. tascam_free_urbs() then returns the capture transfer buffers with usb_free_coherent(), and snd_card_free() releases the snd_card allocation that embeds tascam (card->private_data). The controller completes the queued URBs afterwards, writing device-supplied data into the freed transfer buffer, and capture_urb_complete() dereferences the freed driver object. KASAN on 7.2.0-rc5 (arm64): BUG: KASAN: slab-use-after-free in dummy_timer Write of size 512 at addr ffff000015b62000 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 64: usb_alloc_coherent tascam_alloc_urbs tascam_probe Freed by task 170: usb_free_coherent tascam_free_urbs tascam_disconnect usb_unbind_interface BUG: KASAN: slab-use-after-free in capture_urb_complete Read of size 4 at addr ffff0000170ee878 Freed by task 170: release_card_device snd_card_free tascam_disconnect Restore the usb_anchor_urb() between the reference count bump and the resubmission. That also makes the handler's usb_unanchor_urb() failure arm meaningful again and restores usb_kill_anchored_urbs() as a barrier on the disconnect, suspend and stop-work paths. The anchoring was removed on the premise that the URB is already anchored from the initial submission, which does not hold once the first giveback has run. Discovered by XBOW, triaged by Baul Lee Fixes: 5cff1529a2f9 ("ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260804123625.91769-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 0582952cd6cc4b03f252d225e159dda8666b36b6 Author: Xu Rao Date: Fri Jul 31 11:35:54 2026 +0800 ALSA: hda/tas2781: fix ACPI reference handling commit 8bec01c80e798eca1ae7863cf29bc6befd759db7 upstream. tas2781_read_acpi() gets a reference to the matching ACPI device and then looks up its first physical device node. After taking a reference to the physical device, it immediately drops the ACPI device reference. However, every later failure jumps to an error path that drops the ACPI device reference a second time. This unbalances the reference count and may prematurely release the ACPI device. In addition, acpi_get_first_physical_node() may return NULL. Without a check, the driver passes the NULL physical device to the property helper calls and may dereference it. Return -ENODEV when no physical device is associated with the ACPI node, and remove the duplicate acpi_dev_put() from the common error path. Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Link: https://patch.msgid.link/97EA8F29DA0D9AF7+20260731033554.949564-1-raoxu@uniontech.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit bb61dc2ae59026f76db26e1909746908bc5b6f31 Author: Baul Lee Date: Tue Aug 4 21:36:11 2026 +0900 ALSA: FCP: fix OOB write in fcp_meter_ctl_get() commit 620f1e52a46f604635efd0fb78138afd6a513b5d upstream. fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size by the driver's own limit of 255 if (map.map_size < 1 || map.map_size > 255 || map.meter_slots < 1 || map.meter_slots > 255) return -EINVAL; and passes it to fcp_add_new_ctl() as the control's channel count, where it is stored as elem->channels. Every control read writes into struct snd_ctl_elem_value, whose integer array is declared long value[128], so the limit is 128, not 255. fcp_meter_ctl_get() stores one 64-bit word per channel into that array with no bound of its own: for (i = 0; i < elem->channels; i++) { int idx = private->meter_level_map[i]; int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]); ucontrol->value.integer.value[i] = value; } snd_ctl_elem_read_user() serves that object from memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so element i is written at byte 72 + 8 * i and element 144 already lands past the allocation. At map_size 255 the last store ends at byte 2112, 888 bytes past the object and 64 bytes into the adjacent slab object. The stored words come from the device and meter_level_map[] selects which word lands in which slot, so extent and contents are both controlled. The core does not catch this. snd_ctl_check_elem_info() is reached only from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a compile-time true. __snd_ctl_add_replace() validates kcontrol->count and never inspects elem->channels. Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives the hwdep descriptor that created it, so the out-of-bounds stores are issued by any process able to read controls on /dev/snd/controlC0. KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read: BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185 __asan_store8 fcp_meter_ctl_get snd_ctl_elem_read snd_ctl_ioctl Allocated by task 185: memdup_user snd_ctl_ioctl The buggy address is located 0 bytes to the right of allocated 1224-byte region [ffff000017af0000, ffff000017af04c8) Bound the map size by the ABI limit rather than by 255, and bound the store loop at the sink so it cannot run past the value array whatever elem->channels holds. Discovered by XBOW, triaged by Baul Lee Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260804123611.91715-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 5bf5ccddf00b59f1e3ea7e65d76a5f5b5c21cc2e Author: Baul Lee Date: Wed Aug 5 10:34:45 2026 +0900 ALSA: usx2y: bound the hwdep mmap fault offset commit 2ca1eea3cd17930daffe9e429a7c89232036ec24 upstream. snd_us428ctls_vm_fault() turns the faulting page offset into a kernel address with no bound of any kind: offset = vmf->pgoff << PAGE_SHIFT; vaddr = (char *)(...)->us428ctls_sharedmem + offset; page = virt_to_page(vaddr); get_page(page); vmf->page = page; return 0; snd_us428ctls_mmap() checks only the length of the mapping, never the offset, and us428ctls_sharedmem is a single page from alloc_pages_exact(). For a character device file_mmap_size_max() returns ULONG_MAX, so the mm layer imposes no ceiling either. Every page offset above zero resolves to a struct page outside the object, and the handler installs it into the caller's address space read-write; the vma is not marked read-only. The caller picks the page frame with a single mmap() argument and gets read-write access to a page of kernel memory it does not own; an offset that lands in an unpopulated vmemmap region oopses instead. A process that can open the hwdep node of an attached US-X2Y reaches this after loading the FPGA image through the same node; no capability check is involved. On 7.2.0-rc5 (arm64), mmap() with a large offset: Unable to handle kernel paging request at virtual address fffffdffc45d5ac8 pc : snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] Call trace: snd_us428ctls_vm_fault+0x68/0x140 [snd_usb_usx2y] __do_fault __handle_mm_fault handle_mm_fault el0_da Reject any offset outside the shared region. The pcm hwdep handler in usx2yhwdeppcm.c computes its address the same way and needs the same bound. Discovered by XBOW, triaged by Baul Lee Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260805013445.38283-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f9d492a39ebeb1a56f13ec6dd165a18a48dec812 Author: Takashi Iwai Date: Sat Aug 8 17:20:06 2026 +0200 ALSA: usb: Fix UAF at delayed release of MIDI2 EPs commit f8a80cfb68613fb7e6452b66447dbc63f435d140 upstream. The recent fix for UAF in ump_to_endpoint() caused another UAF because it tries to dereference the UMP endpoint object, but this might be executed at a delayed context where the endpoint has been already released. Add private_free to clear the associated data for avoiding the further dereference for delayed releases. Fixes: 4a05b2d1b464 ("ALSA: usb-audio: fix use-after-free in ump_to_endpoint()") Reported-by: syzbot+565b1138cfbe549d4422@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=565b1138cfbe549d4422 Cc: Link: https://patch.msgid.link/20260808152009.1947835-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 91e4538952a96ab965e823653c5397e543407bd0 Author: SJ Park Date: Tue Jul 28 07:04:03 2026 -0700 mm/damon: adjust isolated pages stat for DAMOS_MIGRATE_{HOT,COLD} commit 1ec0e6b6f7321feb769f50d2f094a0aa6c2eda63 upstream. Callers of migrate_pages() should adjust NR_MIGRATED_{ANON,FILE} for isolations and putback of the folios. That for migration succeeded folios is done by migrate_pages(), in migrate_folio_done(). That for MR_DEMOTION reason is an exception though. DAMOS_MIGRATE_{HOT,COLD} call migrate_pages() but mistakenly not doing the stat adjustment. As a result, use of DAMOS_MIGRATE_{HOT,COLD} could corrupt the stat. It could confuse too_many_isolated(), make compaction and reclaim to behave in unexpected ways. The stat corruption can be reproduced and confirmed using DAMON user-space tool [1] on NUMA systems, like below. $ numactl --hardware available: 2 nodes (0-1) [...] $ sudo ./damo start --damos_action migrate_hot 1 $ sudo cat /proc/sys/vm/stat_refresh $ sudo dmesg [...] [ 80.215554] vmstat_refresh: nr_isolated_anon -5578 [ 80.216842] vmstat_refresh: nr_isolated_file -34400 This issue was discovered [2] by Sashiko. Link: https://lore.kernel.org/20260728140404.94476-1-sj@kernel.org Link: https://github.com/damonitor/damo [1] Link: https://lore.kernel.org/20260726164356.87940-1-sj@kernel.org [2] Fixes: b51820ebea65 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") Signed-off-by: SJ Park Cc: Honggyu Kim Cc: Hyeongtak Ji Cc: # 6.11.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 684f271210becd7b8c4088f06c442499e48a43a0 Author: SJ Park Date: Mon Aug 3 06:40:32 2026 -0700 samples/damon/mtier: error out for zero quota goal target values commit a16fd3ad9d89b05475864da97327870464611736 upstream. Patch series "mm/damon: avoid division by zero from damos_quota_score()". DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division by zero in damos_quota_score(). Avoid it by adding parameters validation checks. This patch (of 2): damos_quota_score() can trigger division by zero if the target_value is zero. DAMON_SAMPLE_MTIER lets users set the target_value via node0_mem_{used,free}_bp parameters. It doesn't guard zero value case, though. As a result, users can trigger division by zero. Fix the issue by returning an error when the user tries to start DAMON with zero node0_mem_{used,free}_bp parameter values. DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite bad. Also the zero node0_mem_free_bp parameter might look like a reasonable setup to some users. Hence, the issue might really happen in the real world. One reliable way to reproduce the issue is like below: # cd /sys/module/damon_sample_mtier/parameters # echo 4096 > node0_start_addr # echo 8192 > node0_end_addr # echo 8192 > node1_start_addr # echo 81920 > node1_end_addr # echo 0 > node0_mem_free_bp # echo Y > enabled # dmesg -w [...] [18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI [...] [18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480 [...] This issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260803134034.15217-1-sj@kernel.org Link: https://lore.kernel.org/20260803134034.15217-2-sj@kernel.org Link: https://lore.kernel.org/20260801202657.117135-1-sj@kernel.org [1] Fixes: c5e67d40a102 ("samples/damon/mtier: add parameters for node0 memory usage") Signed-off-by: SJ Park Cc: # 6.17.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit cfef454862b7d2776e0955b873dd59af6b47cfcb Author: liyouhong Date: Sun Jul 26 09:48:15 2026 +0800 mm/damon/ops-common: putback folios on invalid migrate nid commit 5deb65c34e682e7c5f5df417a70e223e8fcc5f5a upstream. damon_pa_migrate() and damos_va_migrate() isolate folios into a local list and then call damon_migrate_pages(). When target_nid is invalid (including the scheme default NUMA_NO_NODE / -1), damon_migrate_pages() returns early without putting the folios back to the LRU. Callers then discard the list head while those folios remain isolated with an extra reference taken by folio_isolate_lru(). The pages stay off the LRU for as long as the mapping exists (anon active+inactive counts drop while RSS does not), and the leftover references can pin the pages after the mapping is gone. Put the folios back on the invalid-nid path so ignored migration requests still return them to the LRU. Link: https://lore.kernel.org/20260726014815.1280757-1-dayou5941@163.com Fixes: 7e6c3130690a ("mm/damon/ops-common: ignore migration request to invalid nodes") Assisted-by: Cursor:grok-4.5 Reviewed-by: SJ Park Signed-off-by: liyouhong Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit e7e5e5e0dfe2ea171044c24c263efae4ee882b3f Author: SJ Park Date: Mon Aug 3 06:40:33 2026 -0700 mm/damon/lru_sort: error out for >10000 active_mem_bp commit 06befa61c427e74319781e6f35a364cfc32dbae8 upstream. damos_quota_score() can trigger division by zero if the target value is zero. DAMON_LRU_SORT lets users set the target value for the hot memory scheme via active_mem_bp parameter. It avoids setting it as the target value if the parameter value is zero. However, it also sets the cold memory scheme with a target value that is calculated as '10000 - active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold memory scheme's quota goal target value can be zero. As a result, division by zero can be triggered. Fix by returning an error when the user tries to start DAMON with >10000 active_mem_bp parameter value. It makes no sense to set active_mem_bp with 10002. It also requires module parameters write permission to reproduce the issue. That said, the consequence is quite bad. One reliable way to reproduce the issue is like below: # cd /sys/module/damon_lru_sort/parameters # echo 1000 > wmarks_high # echo 995 > wmarks_mid # echo 0 > wmarks_low # echo 10002 > active_mem_bp # echo Y > enabled # dmesg -w [...] [ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI [ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480 This issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260803134034.15217-3-sj@kernel.org Link: https://lore.kernel.org/20260801213028.5127-1-sj@kernel.org [1] Fixes: 40d98d31cd70 ("mm/damon/lru_sort: support active:inactive memory ratio based auto-tuning") Signed-off-by: SJ Park Cc: # 7.0.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 3ea2fd344d93e3cf9503739b09fd702c0d8f8f0b Author: Hui Su Date: Fri Aug 7 23:41:46 2026 +0800 ring-buffer: Fix crash passing ERR_PTR to kthread_stop() commit 91542863abade2fd4f2b361991f5386ad9d19c8c upstream. In test_ringbuffer()'s out_free cleanup loop, the check `!rb_threads[cpu]` only catches NULL entries and misses entries that hold an ERR_PTR. rb_threads[] is static, so unassigned slots are NULL. But when kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or -EINTR) in rb_threads[cpu] before the creation loop jumps to out_free. That entry is non-NULL, so the old `!ptr` check does not break, and the cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop() then dereferences the bogus pointer, crashing the kernel during the late_initcall self-test. crash logs: BUG: kernel NULL pointer dereference, address: 000000000000001c Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy) RIP: 0010:kthread_stop+0x2e/0x220 RBX: fffffffffffffff4 CR2: 000000000000001c Call Trace: test_ringbuffer+0x1ec/0x650 do_one_initcall+0x6c/0x2c0 kernel_init_freeable+0x21d/0x420 kernel_init+0x15/0x1c0 ret_from_fork+0x21b/0x320 Kernel panic - not syncing: Fatal exception Cc: stable@vger.kernel.org Fixes: 64ed3a049e3e ("ring-buffer: make use of the helper function kthread_run_on_cpu()") Link: https://patch.msgid.link/20260807154145.2846521-2-sh_def@163.com Signed-off-by: Hui Su Reviewed-by: Vincent Donnefort Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit eaef442fe68c8c6877890492783661ea82bb5d2d Author: Eddie Lin Date: Fri Jul 24 23:33:41 2026 +0100 misc: fastrpc: fix memory leak in fastrpc_channel_ctx_free commit 2fae94ee14f7fea11d3f95e10383a87c01d21518 upstream. The 'ctx_idr' is initialized but never destroyed when the channel context is freed, leading to a memory leak. Add idr_destroy() to properly clean up the IDR resources. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org Signed-off-by: Eddie Lin Reviewed-by: Ekansh Gupta Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223342.629168-6-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit efd02f8d1a7449f15809bc18d3cd41aafea75d7e Author: Junrui Luo Date: Fri Jul 24 23:33:39 2026 +0100 misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke commit b85a0e91d7d6cd06a53c881a46f749cfcef416a2 upstream. When an invoke is interrupted by a signal, wait_for_completion_interruptible() returns -ERESTARTSYS and fastrpc_internal_invoke() moves every buffer from fl->mmaps onto cctx->invoke_interrupted_mmaps. This list_del()/list_add_tail() walk runs without holding fl->lock, the lock that serialises fl->mmaps in fastrpc_req_mmap() and fastrpc_req_munmap() everywhere else. Take fl->lock around the move, matching every other fl->mmaps accessor. Fixes: 76e8e4ace1ed ("misc: fastrpc: Safekeep mmaps on interrupted invoke") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223342.629168-4-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 0beaa9bd7eb10d9b5e6352ed5161f3f3bbd4c3c5 Author: Ekansh Gupta Date: Fri Jul 24 23:33:38 2026 +0100 misc: fastrpc: Remove buffer from list prior to unmap operation commit 6102ceb4eab845743ee57acd3863fbd06e93c927 upstream. fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. Fixes: 2419e55e532de ("misc: fastrpc: add mmap/unmap support") Cc: stable@kernel.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Ekansh Gupta Signed-off-by: Jianping Li Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223342.629168-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 03a9cea00b399e96f2dd5c2ae7035bf3a068cd85 Author: Anandu Krishnan E Date: Fri Jul 24 23:33:40 2026 +0100 misc: fastrpc: fix channel ctx ref leak when session alloc fails commit 310f7868399668c6d99d88acc9c4cf3462e69d5b upstream. fastrpc_channel_ctx_get() is called in fastrpc_device_open() before fastrpc_session_alloc(). If session alloc fails, the error path returns -EBUSY without calling fastrpc_channel_ctx_put(), leaking the reference. Fix by adding the missing put. Fixes: 278d56f970ae ("misc: fastrpc: Reference count channel context") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223342.629168-5-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 60c1c757fd4f2ecfad397bbbe81957d816f6c264 Author: Ekansh Gupta Date: Fri Jul 24 23:33:37 2026 +0100 misc: fastrpc: Fix initial memory allocation for Audio PD memory pool commit ab99eaafb0c4b412cfeb895a8cf091626e2bbd86 upstream. The initial buffer allocated for the Audio PD memory pool is never added to the pool because pageslen is set to 0. As a result, the buffer is not registered with Audio PD and is never used, causing a memory leak. Audio PD immediately falls back to allocating memory from the remote heap since the pool starts out empty. Fix this by setting pageslen to 1 so that the initially allocated buffer is correctly registered and becomes part of the Audio PD memory pool. Fixes: 0871561055e66 ("misc: fastrpc: Add support for audiopd") Cc: stable@kernel.org Reviewed-by: Dmitry Baryshkov Signed-off-by: Ekansh Gupta Signed-off-by: Jianping Li Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223342.629168-2-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit bd88f6289b7e483216a9c1df15a0460ef9b02cb6 Author: Mariano Baragiola Date: Mon Jul 27 13:08:59 2026 -0300 staging: rtl8723bs: validate monitor transmit frame lengths commit 6829665d050983907b560173e49dcc6c11cb2730 upstream. rtw_cfg80211_monitor_if_xmit_entry() removes the radiotap header and then reads the 802.11 frame control field without checking that a base 802.11 header remains. The data path also pulls the calculated 802.11, QoS and SNAP header span before confirming that the skb contains it. A truncated frame can therefore cause out-of-bounds reads or leave insufficient data for the Ethernet address writes. Reject frames that do not contain the base 802.11 header and data frames that do not contain their complete calculated header span. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Mariano Baragiola Link: https://patch.msgid.link/20260727160859.1917096-1-mbaragiola@linux.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 6235b5156b48ed5d1ce3410d8f0b2fd67d30d944 Author: Panagiotis Petrakopoulos Date: Mon Jul 20 11:24:09 2026 +0300 staging: rtl8723bs: fix missing shared-key auth challenge length check commit 2c56ef658ac8c6bca36bc5574715e8f717207c6c upstream. The WEP shared-key authentication handler uses the challenge-text element's attacker-controlled length without checking it against the fixed 128-byte chg_txt buffer. In OnAuthClient() the length from rtw_get_ie() - up to 255 - is used to perform memcpy() into the 128-byte pmlmeinfo->chg_txt, so a malicious AP sending a malformed WLAN_EID_CHALLENGE element can overflow/underfill chg_txt by up to 127 bytes. It is reachable over the air, before association, during shared-key authentication. In the case of an overflow, the driver can write out of bounds. In the case of an underfill, the driver can echo stale buffer memory. The challenge text is defined to be exactly 128 octets, which is already provided as the WLAN_AUTH_CHALLENGE_LEN define; require the element to be exactly that length before use. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Panagiotis Petrakopoulos Link: https://patch.msgid.link/20260720082409.168379-1-npetrakopoulos2003@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit e429c6dfd5d2324cd866daaf4c29d5cfe4dea0e4 Author: Muhammad Bilal Date: Sun Jul 19 09:15:09 2026 +0500 staging: rtl8723bs: fix OOB read in WMM_param_handler() commit ae21407350151bddfd4fea7aa39bd0643c0ca9d3 upstream. WMM_param_handler() copies a fixed-size WMM parameter element out of a received information element without checking that the element is long enough, causing an out-of-bounds read for a short WMM IE. The handler reads sizeof(struct WMM_para_element) (18) bytes at pIE->data + 6, so it requires pIE->length to be at least 24 (WLAN_WMM_LEN), but it never validates the length. Two of its three callers reach it after matching only the WMM OUI: OnAssocRsp() in rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a 4-byte OUI, before calling the handler. A vendor-specific IE carrying the WMM OUI but a length between 6 and 23, placed in an association response or in the IE blob handed to join_cmd_hdl(), passes the OUI check and then makes the memcmp() and memcpy() at pIE->data + 6 read past the end of the element. OnAssocRsp() parses a frame received from the AP, so this is reachable from a remote peer. The remaining caller in rtw_wlan_util.c already guards the handler with "pIE->length == WLAN_WMM_LEN". Move the equivalent check into the handler itself so every caller is covered; the sibling IE handlers in the same parsing loop (HT_caps_handler(), HT_info_handler(), ERP_IE_handler()) likewise bound their accesses by pIE->length. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal Link: https://patch.msgid.link/20260719041509.97894-1-meatuni001@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 01ab275f8f3e497a13ebbe4ded44ec0623bccde3 Author: Muhammad Bilal Date: Sun Jul 19 08:06:31 2026 +0500 staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie() commit 1c3e23e78862493e8cf1adad02b10ffcb8b9921c upstream. rtw_get_wpa_ie() reads bytes at fixed offsets into a vendor-specific information element without checking that the element is long enough, causing an out-of-bounds read for a short trailing IE. The function locates a vendor-specific IE (EID 221) with rtw_get_ie() and then compares a 4-byte OUI+type at pbuf + 2 and reads a 2-byte version word at pbuf + 6. Those accesses require the IE body to be at least 6 bytes, but rtw_get_ie() only guarantees that the element fits within the buffer; it does not enforce a minimum body length. A vendor-specific IE whose length byte is 0 to 5, placed at the end of the buffer, therefore makes these reads run past the end of the IE and past the end of the buffer itself. The buffer holds information elements taken from received management frames and from the IE blob passed to rtw_cfg80211_set_wpa_ie(), which is kmemdup'd to its exact length, so the read can run off the end of the allocation. The sibling helpers rtw_get_sec_ie(), rtw_get_wapi_ie() and rtw_get_wps_ie() in this file already reject too-short vendor-specific IEs before their OUI memcmp(); rtw_get_wpa_ie() was never brought in line with them, and needs a minimum of 6 rather than 4 bytes because of the version word. Add the missing length check. Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Muhammad Bilal Link: https://patch.msgid.link/20260719030631.88254-1-meatuni001@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit fdfb46c387241b4eddd36d746793764413285913 Author: Fan Wu Date: Fri Jul 31 08:59:15 2026 +0000 serial: amba-pl011: synchronize DMA teardown commit 440915499231e9db1c361aa45bb702e8fd3b4a32 upstream. dmaengine_terminate_all() does not wait for a running callback, so the TX callback can still touch the TX buffer after it is freed. The RX poll timer reads the RX buffers without the port lock. Switch to dmaengine_terminate_sync() and delete the RX timer before freeing the buffers. Fixes: ead76f329f77 ("ARM: 6763/1: pl011: add optional RX DMA to PL011 v2") Cc: stable Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260731085915.326775-4-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit e57f0aa5c35be37218ba0e4887b241584dd4b2d2 Author: Fan Wu Date: Fri Jul 31 08:59:14 2026 +0000 serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ commit 36672c8d7d14e9c43287528455d2c97b526ea6ad upstream. The RS485 trigger hrtimers are embedded in the devm-managed port and can fire after it is freed. The IRQ handler can arm a timer, so free the IRQ first and then cancel both timers. Complete the RS485 stop without arming a timer, and cancel the timers in remove() for the suspend-then-unbind path, where shutdown is not called. This issue was found by an in-house static analysis tool. Fixes: 2c1fd53af21b ("serial: amba-pl011: Fix RTS handling in RS485 mode") Cc: stable Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260731085915.326775-3-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit b49a43ebace145c8f9f2098cb0504d0f5bc7ab9d Author: Fan Wu Date: Fri Jul 31 08:59:13 2026 +0000 serial: amba-pl011: fix indefinite RS485 post-send delay commit dcb2f7576ce460eb4f6b9048b7c266c8da5848a8 upstream. The RS485 stop hrtimer is used both to drain the transmitter and to wait out delay_rts_after_send. The callback cannot tell the two apart, so it restarts the post-send delay on every expiry and the timer never stops. Add a WAIT_AFTER_SEND_DELAY state so its expiry ends the stop sequence instead of restarting the delay. Fixes: 2c1fd53af21b ("serial: amba-pl011: Fix RTS handling in RS485 mode") Cc: stable Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260731085915.326775-2-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 7795e8abedc86438cae0454602cbf9038b94bf38 Author: Ryan Wilbur Date: Thu Jul 30 16:39:20 2026 -0300 serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx commit 1423415471274abda87024967d7fe2206ceee0ea upstream. The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. Cc: stable Assisted-by: Claude:Opus4.8 Signed-off-by: Ryan Wilbur Link: https://patch.msgid.link/20260730193920.28954-1-rwilbur633@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit e7e3cc6709caa49d1d6ce6c1f7cb305e38675cc9 Author: Cunhao Lu <1579567540@qq.com> Date: Mon Jul 27 14:25:22 2026 +0800 serial: 8250_dma: Clear stale RX state on shutdown commit e2fe6a0efecbef00e3ecc2db64dd5afa8c212b41 upstream. serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_running state therefore makes the flush path pass a NULL channel to dmaengine_pause(), causing a kernel Oops. Clear rx_running after terminating RX DMA, matching the TX cleanup. Also make the flush helper return if the DMA object or RX channel is not available so startup and teardown paths cannot pass a NULL channel to the DMAengine API. Fixes: 0fcb7901f9d6 ("tty: serial: 8250_dma: keep own book keeping about RX transfers") Cc: stable Signed-off-by: Cunhao Lu <1579567540@qq.com> Link: https://patch.msgid.link/tencent_9EE2945F4C933B4D810C73C2D7485E000F06@qq.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit b449429e9e78e92ac8395e0e46877ec0141a4198 Author: Luca Fresi Date: Wed Jul 22 00:24:04 2026 +0200 serial: sc16is7xx: enable THRI before filling TX FIFO commit 246ac114f485c2affb454240f3ea4fabfce22456 upstream. sc16is7xx_handle_tx() currently requests the THRI enable only after it has filled the TX FIFO. The request is asynchronous because the IER update is performed later by reg_work. The SC16IS7xx generates a THRI interrupt when the TX FIFO crosses its trigger level. If the FIFO drains past that level before reg_work enables THRI, the chip does not generate a new interrupt. Characters remain queued indefinitely even though the hardware FIFO is empty. This was observed on an SC16IS752 while both UART channels were active. During the stall the software TX buffer remained non-empty while TXLVL reported 64 bytes free, LSR reported THR and transmitter empty, IER had THRI enabled, and IIR reported no interrupt pending. Enable THRI synchronously before filling the FIFO so the threshold crossing cannot be missed. Fixes: cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop") Cc: stable Signed-off-by: Luca Fresi Link: https://patch.msgid.link/20260721222404.204746-1-luca.fresi@bithiatec.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit b1801c0d40f62778b613334de5840aba10a564d5 Author: Jan Sebastian Götte Date: Wed Jul 29 19:41:05 2026 +0200 serial: qcom-geni: fix TX DMA buffer flush commit e3c04834ae1ab5e9cfbe8ac54ec734aa4774249d upstream. When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. Assisted-by: Claude:claude-5-opus Codex:gpt-5 Signed-off-by: Jan Sebastian Götte Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable Reviewed-by: Praveen Talari Link: https://patch.msgid.link/20260729174105.21838-2-git@jaseg.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 5f1d56be1e9cad0127b3a715fad2a6c39872560c Author: Alice Ryhl Date: Mon Jul 27 12:28:59 2026 +0000 rust_binder: do not query current thread for all ioctls commit dd7aea9ee2091cfae3a5e376af87aa106d7735cd upstream. The get_current_thread() method is currently called for every ioctl to ensure that a Thread struct exists for the thread calling into the driver. However, not all ioctls require a Thread object, so this means we are unnecessarily creating these objects in cases where we don't need to. If said thread does not invoke BINDER_THREAD_EXIT on exit, Binder's Thread struct stays around until the fd is closed. For long-lived processes the Thread object is effectively leaked. Furthermore, when the BINDER_GET_NODE_DEBUG_INFO ioctl is invoked by libmemunreachable to ensure that objects reachable only through the Binder driver are not considered leaked, this is done from a fork of the process owning the fd, which means that it fails the group_leader check inside get_current_thread(). This results in EINVAL errors for this ioctl, causing libmemunreachable to report a false positive memory leak. Thus, do not invoke get_current_thread() for ioctls that do not require it. Signed-off-by: Alice Ryhl Cc: stable Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver") Acked-by: Carlos Llamas Link: https://patch.msgid.link/20260727-binder-cur-thread-v1-1-8edf2b64e235@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 1149ce318c2bdd17cf57b59624efca90ec4f25ad Author: Mathieu Dubois-Briand Date: Fri Jul 24 23:34:04 2026 +0100 nvmem: layouts: Add fixed-layout driver commit b5be879519291f139fa7b365fd0dbc84710e4919 upstream. Current implementation isn't working well when device tree nodes have a phandle on a fixed-layout nvmem node. As the fixed layout is handled in nvmem core, no driver is ever associated with the layout, and the device consumer driver probe is deferred indefinitely. Remove the specific handling of fixed-layout and add a layout driver. This makes the fixed-layout similar to all other layouts, fixing the whole issue. Fixes: fc29fd821d9a ("nvmem: core: Rework layouts to become regular devices") Cc: stable@vger.kernel.org Reviewed-by: Miquel Raynal Signed-off-by: Mathieu Dubois-Briand Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223404.629248-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit d11b12dcdce9077f5b53d3a688e58a5f19be8165 Author: Aelin Reidel Date: Fri Jul 24 23:34:03 2026 +0100 nvmem: apple-spmi-nvmem: wrap regmap calls to satisfy CFI commit ff10b6db0ab75b132aed69ab144ac04f63ef9bdb upstream. The Apple SPMI NVMEM driver previously cast regmap_bulk_read/write to void * when assigning them to nvmem_config's reg_read/reg_write function pointers. This cast breaks the expected function signature of nvmem_reg_read_t and nvmem_reg_write_t. With CFI enabled, indirect calls through these pointers fail: CFI failure at nvmem_reg_write+0x194/0x1e4 (target: regmap_bulk_write+0x0/0x2c8; expected type: 0x83a189c3) ... Call trace: nvmem_reg_write+0x194/0x1e4 (P) __nvmem_cell_entry_write+0x298/0x2e8 nvmem_cell_write+0x24/0x34 macsmc_reboot_probe+0x1dc/0x454 [macsmc_reboot] ... Introduce thin wrapper functions with the correct nvmem function pointer types to satisfy the CFI checks. Fixes: fe91c24a551c ("nvmem: Add apple-spmi-nvmem driver") Signed-off-by: Aelin Reidel Reported-by: Clayton Craft Tested-by: Clayton Craft Reviewed-by: Sven Peter Cc: stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260724223404.629248-2-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit d88678d3fcb0ce887fe50a528a1abe8caac4f7ec Author: Alexander Usyskin Date: Sun Jul 19 12:57:55 2026 +0300 mei: pull kvfree out of spinlock commit b0495bb58af06a7de4628c72d500e3d5e180d808 upstream. The read buffer allocation was changed from kmalloc() to kvmalloc(). This buffer is part of mei_cl_cb structure that can be queued in rd_complete queue protected by spinlock. Releasing the structure leads to errors like below when freeing buffer that allocated non-contiguous: BUG: sleeping function called from invalid context at mm/vmalloc.c:3448 Separate mei_cl_cb structure dequeue and release to perform only dequeue under spinlock and push release out of spinlock. Cc: stable Fixes: 4adf613e01bf ("mei: use kvmalloc for read buffer") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16359 Reviewed-by: Menachem Adin Signed-off-by: Alexander Usyskin Link: https://patch.msgid.link/20260719-kvfree_out_of_spinlock-v1-1-e07d6333bea7@intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit ed503eaad62f20cdd5122d7c3078a648a99c8f16 Author: Chengfeng Ye Date: Sat Aug 8 02:17:10 2026 +0800 ipv4: fix use-after-free in fib_nhc_update_mtu() commit bc5bde9ce3cc36502839dfe98e068f7303a50982 upstream. fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop. Fixes: af7d6cce5369 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes") Cc: stable@vger.kernel.org Suggested-by: Ido Schimmel Signed-off-by: Chengfeng Ye Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260807181710.1178747-1-nicoyip.dev@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 9b22f13524fa0de0d963bbd3002df6c28bae3395 Author: Zihan Xi Date: Thu Jul 30 12:59:26 2026 +0000 ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops commit 4ff9548d84945d2cbf9e4c207288063a200ea397 upstream. fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present. Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/6f53fa797fcaeb26966432ed7ae9bb87c4961f37.1785411220.git.zihanx@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1dd48303931bfa984555da8a3a46397bac571b1c Author: Michal Luczaj Date: Sat Aug 15 09:50:39 2026 -0300 selftests/bpf: Adapt sockmap update error handling [ Upstream commit 30581eda4a07ff15db623612cac578e81869e96f ] Update sockmap_listen to accommodate the recent change in sockmap that rejects unbound UDP sockets. TCP: Reject unbound and bound (unless established or listening). UDP: Accept only bound sockets. While at it, migrate to ASSERT_* and enforce reverse xmas tree. Signed-off-by: Michal Luczaj Reviewed-by: Kuniyuki Iwashima Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-3-f878346f27ab@rbox.co Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 8cf744abef6a777ae46a2c4cda9edbea25186914 Author: Michal Luczaj Date: Sat Aug 15 09:50:38 2026 -0300 selftests/bpf: Ensure UDP sockets are bound [ Upstream commit fe3ff273767ef22fe8a7cb3816f264927c190e50 ] Update sockmap_basic tests to bind sockets before they are used. This accommodates the recent change in sockmap that rejects unbound UDP sockets. Signed-off-by: Michal Luczaj Reviewed-by: Kuniyuki Iwashima Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-1-f878346f27ab@rbox.co Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 781d944ca9100a40c62cb9229df8f5f851f7ae9c Author: Nils Helmig Date: Sat May 30 14:39:34 2026 +0200 Bluetooth: btusb: Add TP-Link UB600 for Realtek 8761BUV [ Upstream commit bc597f0cc44f0b173c50ee986a047219cd559ee9 ] Add the vendor/product ID (0x37ad, 0x0600) to usb_device_id table for Realtek 8761BUV. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=37ad ProdID=0600 Rev= 2.00 S: Manufacturer= S: Product=TP-Link Bluetooth USB Adapter S: SerialNumber=ACA7F14FD2A5 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Nils Helmig Reviewed-by: Paul Menzel Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit d5977f4f995e17195c628ddf50d1ce5619cf7a6b Author: Alexej Sidorenko Date: Wed Apr 29 17:13:43 2026 +0200 Bluetooth: btrtl: fix RTL8761B/BU broken LE extended scan [ Upstream commit 5ead2063611ae56809b1b113ac44cef9547c81d7 ] RTL8761B and RTL8761BU devices report HCI version 5.1 but do not support the LE Extended Scan commands. This causes repeated failures with Opcode 0x2042 (LE Set Extended Scan Parameters) returning -EBUSY when BlueZ attempts extended scanning while a connection is active. Set HCI_QUIRK_BROKEN_EXT_SCAN for CHIP_ID_8761B to make BlueZ fall back to legacy LE scan commands which the firmware supports correctly. Tested with RTL8761BU (USB ID 0bda:a728) where the issue manifested as continuous 'Opcode 0x2042 failed: -16' errors in dmesg whenever a BLE connection was active. Signed-off-by: Alexej Sidorenko Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit e828321f9cfa444d705f6cf9b749552882143834 Author: Maciej Fijalkowski Date: Thu Aug 13 19:00:03 2026 -0300 selftests/xsk: account reclaimed invalid Tx descriptors [ Upstream commit f49d99eaee7c32badc7ddfaecbb01ce4d037d695 ] Invalid Tx descriptors are now returned through the completion ring, regardless of whether they form a standalone packet or belong to an invalid multi-buffer packet. The selftests previously counted only descriptors belonging to valid packets, with a special exception for some invalid multi-buffer packets in verbatim streams. This undercounts completion entries when a standalone invalid descriptor or another invalid packet is reclaimed by the kernel. Keep valid_pkts as the number of packets expected on the Rx side, but count every descriptor submitted to the Tx ring in valid_frags, as every such descriptor is now expected to be returned through the completion ring. Make fragment counting in verbatim mode follow the packet boundary instead of stopping at the first invalid fragment. Update custom stream generation so an invalid middle fragment terminates the generated Rx packet while Tx completion accounting still covers the complete invalid packet. Also add explicit end fragments after invalid middle descriptors. This exercises the kernel drain logic and verifies that subsequent valid packets are not interpreted as continuations of the invalid packet. [ rbm: in testapp_invalid_desc_mb() hunk, use umem_size instead of umem_sz ] Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-7-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 6d419a03249c694e41ec45b1c25839bf40dc599b Author: Maciej Fijalkowski Date: Thu Aug 13 19:00:02 2026 -0300 selftests/xsk: fix too-many-frags multi-buffer Tx test [ Upstream commit c5b1ca6a02886f00170ed91b757e244f23259e91 ] The too-many-frags test describes a packet that is valid from the Tx ring ownership point of view, but invalid for transmission because it exceeds the supported number of fragments. Keep the generated Tx descriptors valid so that __send_pkts() accounts them as outstanding descriptors that must be reclaimed through the CQ. Then mark the corresponding Rx packet invalid so the test still does not expect the oversized packet to appear on the receive side. Add a valid synchronization packet after the oversized packet so the test can verify that the Tx path drains the bad packet and resumes at the next packet boundary. Reviewed-by: Jason Xing Signed-off-by: Maciej Fijalkowski Acked-by: Stanislav Fomichev Link: https://patch.msgid.link/20260719135609.147823-6-maciej.fijalkowski@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 7cf710e70f9bb8ea75f759ebed09871801315992 Author: Keno Fischer Date: Fri Aug 14 14:43:28 2026 +0200 futex: Prevent robust futex exit race some more commit 6d4514ca9cdf61fec4ec634cf50386f6f7e69748 upstream. A robust futex unlock stores 0 over the whole futex value - wiping FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot notification: the protocol relies on its recipient to either acquire the futex (and eventually unlock while aware of the remaining contention) or re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed before it can do either, the kernel must jump in and wake the next task down the line. This is a known complication of the futex protocol with a previous partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit race"). Unfortunately, that fix is insufficient. If a third task re-acquired the futex through the uncontended fast path in the meantime, the notification is lost: robust exit processing sees that it is owned by another task and does nothing, while the new owner sees no FUTEX_WAITERS when it unlocks and wakes nobody. The remaining waiters sleep forever behind a free futex: A owns the futex, B and C sleep in FUTEX_WAIT uval == A | FUTEX_WAITERS A robust unlock: store 0, FUTEX_WAKE(1) wakes B uval == 0 D fast path acquire: cmpxchg(0 -> D) uval == D, no FUTEX_WAITERS B killed before acting on the wakeup B exit walk, pending op: owner D != B -> no action D unlock: no FUTEX_WAITERS -> no wake C sleeps forever This is clearly a shortcoming in the implementation, which fails to keep the FUTEX_WAITERS bit consistent. Work around this by augmenting the robust list exit processing to also perform the extra wakeup if the futex word is owned by another thread but FUTEX_WAITERS is not set. This does not fix the problem of a non-contended take over/release and free sequence, which has been discussed for years and has been addressed by commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and subsequent changes, but failed to take the problem described above into account. A more complete solution which is based on the in kernel unlock of contended robust futexes has been discussed in the context of this change and should show up in mainline sooner than later. [ tglx: Amend change log slightly and fixup coding style ] Fixes: ca16d5bee598 ("futex: Prevent robust futex exit race") Signed-off-by: Keno Fischer Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Assisted-by: ClaudeCode:claude-fable-5 tla+ Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260730194705.38981-1-keno@juliacomputing.com Signed-off-by: Sasha Levin commit 86e48e822111c261172039efe78e03b9f113b201 Author: Alex Deucher Date: Wed Aug 12 10:49:01 2026 -0400 Revert "drm/amd/display: Fix backlight max_brightness to match exported range" This reverts commit 1191285ecb4233e5bf907da7e9394d7999055566. This patch is apparently missing a dependency from 7.2 as users have not reported any regressions with 7.2-rc, but there are regressions on 7.1. The regression manifests as inconsistent lower brightness at the top end (e.g., around 98%). Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5562 Signed-off-by: Alex Deucher Cc: Thorsten Leemhuis Cc: Sergio Callegari Cc: Mario Limonciello Signed-off-by: Sasha Levin commit e08665218040f8e312abe40f74543186f3c2c941 Author: Baul Lee Date: Wed Jul 29 22:19:41 2026 +0900 net: bridge: mrp: fix uninitialised bytes on the wire commit 63488dba65ef91373ef616575b32eb0eb21459f4 upstream. br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have. Fixes: f7458934b079 ("net: bridge: mrp: Update the Test frames for MRA") Suggested-by: Nikolay Aleksandrov Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260729131941.10254-1-baul.lee@xbow.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e2ab7e878bdbe80104c879c31fd2d82a476703b8 Author: Chengfeng Ye Date: Thu Jul 30 01:31:00 2026 +0800 netfilter: ebt_nflog: pin the NFLOG backend commit 30825970339c107bacaf7f61af90fcdb1f597ca1 upstream. nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call Trace: instance_lookup_get_rcu+0x1ce/0x1f0 [nfnetlink_log] nfulnl_log_packet+0x248/0x2fb0 [nfnetlink_log] nf_log_packet+0x204/0x300 ebt_nflog_tg+0x351/0x550 ebt_do_table+0xedf/0x22b0 Allocated by task 90: __kmalloc_noprof+0x186/0x470 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 register_pernet_subsys+0x23/0x40 Freed by task 93: kfree+0x131/0x3c0 ops_undo_list+0x3e3/0x700 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 nfnetlink_log_fini+0x34/0x450 [nfnetlink_log] Acquire the ULOG logger module reference when an ebt_nflog rule is validated and release it when the rule is destroyed. Request the NFLOG backend for legacy callers when needed, matching xt_NFLOG. This prevents module teardown until all ebt_nflog rules have stopped using the logger. Fixes: c83fa19603bd ("netfilter: nf_log: don't call synchronize_rcu in nf_log_unset") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit ef365e8f9c24880af5bd3d9b41be44f354f8ec5d Author: Philipp David Date: Tue Aug 4 15:22:03 2026 -0700 igc: fix netdev not re-attached after resume if interface is down commit b0ce5fd9fabe7c79463cf4602217d4dfeff5b1fd upstream. __igc_resume() calls netif_device_attach() only inside the netif_running() branch, so an interface that was down during suspend is never re-attached on resume. It then stays in the not-present state that __igc_shutdown() set via netif_device_detach(): ethtool reports ENODEV and every attempt to bring the interface up fails the netif_device_present() check in __dev_open() with -ENODEV, silently, since __igc_resume() returns 0. Only reloading the driver recovers the device. This is easy to hit in practice because NetworkManager brings managed interfaces down before sleep unless Wake-on-LAN is configured, making the adapter unusable after every suspend/resume cycle with WoL disabled. Re-attach the netdev on every successful resume, as igb and e1000e do. Fixes: 6f31d6b643a3 ("igc: Refactor runtime power management flow") Cc: stable@vger.kernel.org Signed-off-by: Philipp David Reviewed-by: Aleksandr Loktionov Reviewed-by: Dima Ruinskiy Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 9d067e581597c462c51fee8a30b51bc48a68c4e1 Author: Zihan Xi Date: Sun Aug 2 09:23:34 2026 +0000 mac802154: fix netdev use-after-free in beacon worker commit 5f26a690e8efa54315e4922368daf54e0b8f5515 upstream. mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired. Fixes: 3accf4762734 ("mac802154: Handle basic beaconing") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/e9a3909c7a6281967961773ca841e860b8ecf40e.1785596603.git.zihanx@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 928128865e43b197e30688dc1bc991592c97edcf Author: Zhiling Zou Date: Tue Jul 28 01:23:29 2026 +0800 inet: frags: publish queues before arming timer commit 653d7ddf6cba867777a3d14c4f83ace008c5ad13 upstream. inet_frag_create() arms the fragment queue timer before inserting the queue into the fqdir rhashtable. If the namespace fragment timeout is zero or negative, the timer can run before the queue is published. The timer callback then marks the queue complete, tries to remove a node that is not in the hash table yet, and drops the anticipated hash reference. Creation can subsequently publish the completed queue without restoring that reference, leaving a stale hash node after the caller drops the remaining reference. Publish the queue first and arm the timer while holding the queue lock. This makes timer expiry wait until the queue is visible in the hash table, so inet_frag_kill() can remove the node and balance the hash reference. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Link: https://patch.msgid.link/bf66785e7c0c139d7a1900e2f01faeeab344b960.1784948849.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fc902f52a02298c7432b2334c0c82a2885a1a8b6 Author: Qihang Tang Date: Wed Aug 5 20:57:27 2026 +0800 net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header commit 3b9a324e646d3657a8d9806dfbfe4f3e4066e882 upstream. dev_validate_header() reads dev->hard_header_len directly when zero-padding short link layer headers for CAP_SYS_RAWIO holders: if (capable(CAP_SYS_RAWIO)) { memset(ll_header + len, 0, dev->hard_header_len - len); return true; } Packet send paths call dev_validate_header() on skbs whose headroom was allocated from an earlier hard_header_len read. If the device is reconfigured so that dev->hard_header_len increases before validation, the memset writes past the reserved buffer, an out-of-bounds write. This out-of-bounds write is masked in some SOCK_RAW paths today because the same concurrent increase can first make skb_push() exceed the reserved headroom and trigger skb_under_panic(). Remove the zero-padding branch before making those hard_header_len reads consistent, so the snapshot fixes do not turn a loud panic into a silent overwrite. This path is only reached for variable length L2 protocols, where len < hard_header_len but len >= min_header_len. No remaining in-tree variable length L2 protocol implements header_ops->validate, and the CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no real value beyond allowing testing of intentionally malformed input. Drop the CAP_SYS_RAWIO branch. The remaining reads of dev->hard_header_len in dev_validate_header() are comparisons only and have no memory safety impact. Suggested-by: Willem de Bruijn Fixes: 2793a23aacbd ("net: validate variable length ll headers") Cc: stable@vger.kernel.org Signed-off-by: Qihang Tang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260805125729.19220-2-q.h.hack.winter@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3010b7f13647736ff98fb623753a959136dedb29 Author: Sergey V. Frolov Date: Tue Aug 4 15:04:48 2026 +0300 net: octeontx2-pf: Fix UB in shift operation commit 7e2d693af0d4c05bddccb3541a0aabd69f4cb244 upstream. In function otx2_get_egress_burst_cfg, when the parameter `burst` is 255 and the max mantissa is 255 (0xFFULL), `burst_exp` is set to `ilog2(255) - 1`, which equals 6. This results in an unsigned wrap-around when calculating `(1ULL << (*burst_exp - 7))`, since `*burst_exp - 7` becomes -1, which makes the shift operand 0xFFFFFFFF. This value is greater than the width of the left operand. According to standard 6.5.7 p.3: "The type of the result is that of the promoted left operand. If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined." Fix the off-by-one boundary condition. Add a WARN_ON(*burst_exp < 7) before the else branch as an explicit safeguard. This ensures that if max_mantissa ever changes in a way that reintroduces this condition, it will be immediately caught at runtime rather than silently triggering UB. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sergey V. Frolov Cc: stable@vger.kernel.org Reviewed-by: Ratheesh Kannoth Reviewed-by: Sunil Goutham Link: https://patch.msgid.link/20260804120446.1955448-1-Sergey.V.Frolov@kaspersky.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit e2d658c6427844cee5bc654b436ca68d680b6148 Author: Zijie Huang Date: Sat Aug 1 21:42:33 2026 +0800 net/sched: reject overly deep qdisc hierarchies commit dedd34b0f2310e28c5f6d4875cfbf4b7ed821c01 upstream. Deep qdisc hierarchies can lead to excessive recursion in qdisc tree walkers and exhaust the kernel stack. The existing loop check does not cover the create-and-graft path, so a hierarchy can still be extended by creating a new child qdisc below an already deep parent. Store the hierarchy depth in struct Qdisc and update it when qdiscs are grafted. Reject new child qdiscs once the parent is already at the maximum allowed depth. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Suggested-by: Jamal Hadi Salim Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zijie Huang Signed-off-by: Ren Wei Reviewed-by: Victor Nogueira Link: https://patch.msgid.link/1e9ab39597423fd5d13cfaaf52279b8ee3d9fc3c.1785434373.git.milkory@outlook.com Acked-by: Jamal Hadi Salim Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 20751193d83be2e9735d4faee71375691c09cd13 Author: Zhiling Zou Date: Mon Aug 3 08:29:36 2026 +0800 net: openvswitch: reallocate update replies for mismatched IDs commit 5d1c224dd914579524a183a514c12b95095d12ce upstream. ovs_flow_cmd_new() preallocates the optional reply skb before it takes ovs_mutex and before it knows which existing flow will be updated. That is normally fine because the skb is sized from the request flow identifier. That identifier also becomes the inserted flow's identifier. For updates, however, a request with a UFID may miss the UFID lookup and then fall back to the flow key lookup. That lookup can legitimately find an existing key-identified flow. UFIDs are optional and the flow key is the primary identifier. For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's identifier, not the request identifier used for the preallocation. A short request UFID can therefore leave too little room for the key identifier. The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the update path. Once the update target has been resolved, reallocate the reply skb if the matched flow needs a larger reply than the request identifier allowed. Do this before replacing the actions so the request can still fail cleanly if the rare extra allocation fails. Fixes: 74ed7ab9264c ("openvswitch: Add support for unique flow IDs.") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Reviewed-by: Ilya Maximets Link: https://patch.msgid.link/f7bbd3c30ce81a39156e226b3872d73abed21d2f.1785644623.git.zhilinz@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ea1ccd6d1c6370868e3b032a3fc575b9c397f2e1 Author: Sun Jian Date: Mon Aug 3 22:40:38 2026 -0700 net: fix skb length accounting after generic XDP frag adjustment commit 33f2b2eb33d666ecac68031e0f31424fb70528db upstream. Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly. Fixes: e6d5dbdd20aa ("xdp: add multi-buff support for xdp running in generic mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/al9T9Eto%2FhRIzP5W@boxer/ Reviewed-by: Mohsin Bashir Acked-by: Lorenzo Bianconi Signed-off-by: Sun Jian Link: https://patch.msgid.link/20260804054040.613675-2-sun.jian.kdev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit a08196c3cc105947746ec21309edfbb60275fcdb Author: Zihan Xi Date: Wed Jul 29 09:16:53 2026 +0000 packet: synchronize pressure clearing with ring reconfiguration commit 1a35da325cac4d5bcad76a2aa943408a6f1d9000 upstream. packet_set_ring() updates the RX ring state under sk_receive_queue.lock, but used to publish the tpacket receive mode through po->prot_hook.func after releasing that lock. packet_poll() and packet_recvmsg() can then run the pressure clearing path after the ring has been cleared while still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference stale or NULL ring storage. Move the existing receive hook assignment into the same sk_receive_queue.lock section as the ring state update. Keep the assignment otherwise unchanged, including on TX ring reconfiguration, to avoid adding behavior changes that are not required for the fix. Serialize packet_recvmsg() pressure clearing with the same queue lock only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear and the socket has moved away from tpacket_rcv, packet_set_ring() has already detached the socket and waited for synchronize_net(), so no new packet input can set the flag again. packet_poll() already holds sk_receive_queue.lock, so it uses the new unlocked helper directly. Fixes: 2ccdbaa6d55b ("packet: rollover lock contention avoidance") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit fdd4d7d52358a58e351dd9d82530c04eba8ccd7a Author: Doruk Tan Ozturk Date: Fri Jul 24 16:40:15 2026 +0200 net/packet: reset the MAC header on the packet-socket transmit path commit c2707480cfbf19c7619acc9c089d17f20869821f upstream. packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mirroring __dev_queue_xmit(), so the frame is anchored on the bypass path too. Found by 0sec (https://0sec.ai) using automated source analysis; verified against source and matched to the macsec KASAN report in f5089008f90c. Compile-tested. Fixes: 75c65772c3d1 ("net/packet: Ask driver for protocol if not provided by user") Cc: stable@vger.kernel.org Signed-off-by: Doruk Tan Ozturk Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260724144015.63219-1-doruk@0sec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d48ea5c9c4c34dc0df621f0e39ed3a16b644621a Author: Qihang Tang Date: Wed Aug 5 20:57:29 2026 +0800 packet: use consistent hard_header_len in TX_RING send path commit 21b5953e7494c16a42e6cd8cf110e18d13ae4a6b upstream. tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative. Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb(). The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here. Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Cc: stable@vger.kernel.org Signed-off-by: Qihang Tang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b06b6fce6d7deaf7238e09b48ce3b1125ff41acd Author: Qihang Tang Date: Wed Aug 5 20:57:28 2026 +0800 packet: use consistent hard_header_len in non-ring send paths commit 03390aa32e669cc4ecd7d34108e2e1afc13d689d upstream. packet_snd() reads dev->hard_header_len multiple times while allocating and constructing an skb. Device reconfiguration can change this value concurrently, for example through bonding device type changes. For SOCK_RAW, packet_snd() can save a larger value in reserve and later allocate headroom using a smaller value. Moving skb->data back by reserve then places it before skb->head, and the following copy from userspace can attempt an out-of-bounds write. packet_sendmsg_spkt() has the same issue because it calculates its reservation and header offset from separate reads before dropping the RCU read lock to allocate the skb. Add LL_RESERVED_SPACE_EX() for callers that already saved a header length. Read hard_header_len once in packet_snd() and use it for allocation and construction. In packet_sendmsg_spkt(), preserve the allocation-time value through the device lookup retry. The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here. Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation") Cc: stable@vger.kernel.org Signed-off-by: Qihang Tang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 384b4dae14277d369221d187e9b3af56c79d2e50 Author: Kyle Zeng Date: Tue Aug 4 06:10:55 2026 +0000 ipvs: clear IPv4 options after rebasing tunnel ICMP errors commit e0ba936287dfe9783426aac27e5fd76fe35b38c9 upstream. ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the quoted original request before passing it to icmp_send(). However, IPCB(skb)->opt still describes the outer IPv4 header. A timestamp option in the outer header can therefore leave an offset that points into the quoted transport header after the rebase. __ip_options_echo() treats a byte at that stale location as the option length and copies it into the fixed-size option storage on the __icmp_send() stack, causing a stack out-of-bounds write. Clear the stale option metadata after resetting the network header. Keep the remaining control block fields, including the ingress interface used by the ICMP response path. Fixes: f2edb9f7706d ("ipvs: implement passive PMTUD for IPIP packets") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6-sol Codex:gpt-5.5-cyber Signed-off-by: Kyle Zeng Co-developed-by: David Lee Signed-off-by: David Lee Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit ad8439a210813358b69fe5752401624ad5c2c75a Author: Yizhou Zhao Date: Fri Jul 31 22:27:43 2026 +0800 ipvs: separate destination availability state commit cdcc4e46180df8161f4d2f3c6fd6beaf6990133d upstream. IPVS configuration paths update destination availability while connection accounting updates destination overload state. The two independent states share dest->flags, so their read-modify-write updates can race and lose one another. Keep OVERLOAD in flags, where the preceding patch serializes its updates with dst_lock, and move AVAILABLE to cflags. This keeps configuration- controlled availability out of the scheduler hot cacheline until a scheduler needs to check it. It also prevents availability updates from clobbering overload state. The destination status bits are not exposed through the IPVS sockopt or netlink interfaces, so keep their definitions in the internal IPVS header. Readers can still observe stale destination state; this does not provide a cross-field snapshot. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Link: https://lore.kernel.org/all/8913381c-1e02-35c7-0ec4-61de5a12fd35@ssi.bg/ Assisted-by: Claude-Code:GLM-5.2 Suggested-by: Julian Anastasov Signed-off-by: Yizhou Zhao Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit bc1286dca5a4df87450c3e95267d3f945fad3a28 Author: Julian Anastasov Date: Fri Jul 31 22:27:42 2026 +0800 ipvs: properly update the overload flag on dest edit commit 8f843441c4e7eae8ea83491e8c203c2b192edcf5 upstream. The upper/lower connection thresholds for dest can be changed, so use ip_vs_dest_update_overload() to properly update the dest overload flag. The thresholds were not limited, fit them in the 0 .. INT_MAX range as already done in ipvsadm. As the thresholds are also read when connections are created and expired, use WRITE_ONCE/READ_ONCE to access them. As the lower threshold is optional, use (u - (u >> 2)) to calculate the 75% default value based on the upper threshold by preserving the integer rounding, as suggested by Yizhou Zhao. Trigger flag update when totalconns reaches one of the thresholds and use dst_lock to serialize the updating. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Julian Anastasov Signed-off-by: Yizhou Zhao Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 7c3fdb37de1443df4380c728a85abaaf9c49f167 Author: Julian Anastasov Date: Fri Jul 31 22:27:41 2026 +0800 ipvs: add totalconns for dest commit 04d2feaed8d0103c498727191ba04001d5100e67 upstream. Replace the inactconns dest counter with totalconns, now inactconns can be obtained from totalconns - activeconns. This reduces the atomic inc/dec ops for TCP/SCTP from 6 to 4 if the connection is established and then closed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Julian Anastasov Signed-off-by: Yizhou Zhao Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 2335dedc1922dfa889ca1f9f70370924e8e79a08 Author: Zhiling Zou Date: Wed Jul 29 21:56:59 2026 +0800 ipvs: stop estimator after disabled calc phase commit 558f67f1340f803a346ecd14a69c49653111c5f4 upstream. IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference. Fixes: 705dd3444081 ("ipvs: use kthreads for stats estimation") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit dd04114af0d451091f7b8cbd26d9e37d011e9131 Author: Lincoln Wallace Date: Mon Aug 3 10:50:21 2026 -0300 ima: fix out-of-bounds read in xattr_verify() commit 5ff232d31106f45ac87c3b64e1d35a0667777797 upstream. The digest-length check in xattr_verify() mixes int and size_t: if (xattr_len - sizeof(xattr_value->type) - hash_start >= iint->ima_hash->length) sizeof() yields size_t, so the usual arithmetic conversions promote the whole left-hand side to unsigned 64-bit before the subtraction runs. For a truncated xattr this underflows instead of going negative: a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1) turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length. The check then passes and the following memcmp() reads iint->ima_hash->length bytes starting past the end of the buffer vfs_getxattr_alloc() allocated for it. Nothing upstream clamps xattr_len back into a safe range first: ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than failing when no HMAC key is loaded, so a truncated security.ima value reaches the length check as-is. Rewrite the comparison so every operand stays a signed int and no implicit conversion to size_t can occur. Fixes: 3ea7a56067e6 ("ima: provide hash algo info in the xattr") Cc: stable@vger.kernel.org Signed-off-by: Lincoln Wallace Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman commit 3cc26c8907db0f5d1ff8043b5851ee572e9b3c98 Author: Lorenzo Stoakes (ARM) Date: Thu Jul 23 16:16:31 2026 +0100 mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF commit 26444eb71465c9934d9d418ef69c43f61185329b upstream. Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge leaf entries where possible, freeing the lower page table when it does. It does this with no meaningful locks held against concurrent ptdump walks. As a result, use-after-free can currently occur. This series addresses the issue by having the vmap huge promotion logic acquire the mmap read lock while both setting the huge page table entry and freeing the prior leaf page table. The ptdump code already acquires the mmap write lock, so by doing so we ensure that the ptdump walker only ever observes either the huge page table entry or the existing page table entry, and nothing is freed underneath it. A mitigation for this issue was already applied for arm64 in commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which this series has to deal with carefully. This mitigation resolves the issue by acquiring the mmap read lock on init_mm on vmap page table free if a ptdump is in progress. However the fix in this series would cause a deadlock if we were to simply apply it for arm64 without also reverting the change. This is because vmap may acquire the read lock before ptdump attempts to acquire the write lock, which then gets queued, and rwsem starvation rules mean that the (unacknowledged) nested mmap read lock in the arm64 code would also block, meaning the original read lock is never released and thus deadlock. This series works around this by #ifndef CONFIG_ARM64'ing the mmap read lock in vmap logic, then partially reverting commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), keeping the enablement of huge vmap support, and removing the ifdeffery with the partial revert patch. There are related issues that are also addressed in this series: * x86 page attribute logic, specifically Change Page Attributes (CPA), implements a feature whereby huge ranges can be collapsed into huge leaf entries. This can similarly cause a UAF when done in parallel with a ptdump walk, so similarly acquire the init_mm mmap lock to avoid this. * The CPA logic allows concurrent page table manipulation and CPA collapse, meaning the former risks accessing a page table the latter frees. Fix this by acquiring mmap write lock on init_mm across the whole CPA collapse operation and read lock on the page table manipulation. * x86 and arm64 permit walks of non-kernel mm's (both allowing efi mm walks, and in x86's case arbitrary mm's), so we ensure kernel mappings remain stable by locking the init_mm as well as the mm being walked. The ordering of patches is established for both strict dependencies (the arm64 partial revert in particular has to be done after the vmap changes) and logical ones (the non-kernel mm fix only makes sense once the vmap/CPA fixes are in place). This patch (of 3): Currently there is a nasty race between ptdump and vmap when attempting to map a huge P4D, PUD or PMD entry: * ptdump walks kernel page table ranges it doesn't own. * When vmap maps ranges it tries to promotes existing ones to huge page tables in vmap_try_huge_[p4d,pud,pmd]() at P4D, PUD and PMD level, freeing the lower page table in [p4d,pud,pmd]_free_[pud,pmd,pte]_page() when it succeeds. Both of these things can happen at the same time and as a result ptdump can access a freed page table, resulting in a use-after-free and memory corruption. This is possible because while ptdump_walk_pgd() holds both the mem hotplug lock and the mmap write lock before invoking walk_page_range_debug(), vmap takes no relevant locks at all. Fix this by holding the mmap read lock in vmap_try_huge_*() when freeing page tables. The read lock is sufficient: ptdump is the only walker that must be excluded and it holds the mmap write lock. Other holders of the read lock may run concurrently, but each exclusively owns the range it operates on and cannot reach the page tables freed here. We also hold the lock while assigning the huge page table entry, which means page table walkers observe only the huge or non-huge page table entry. We use a trylock to prevent ptdump from blocking vmap making forward progress. This is fine because it's an optimisation in any case, and thus the vmap can safely proceed regardless. All other kernel page table walkers that touch vmalloc ranges either exclusively own the memory walked or acquire the mmap lock, so this correctly excludes those walkers. One wrinkle here is commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump"), which addresses the issue for arm64 only by explicitly acquiring the mmap read lock on kernel page table freeing should a concurrent ptdump be in progress. This is problematic as vmap may acquire the mmap read lock prior to ptdump attempting to acquire an mmap write lock, leading to a deadlock when the mmap read lock is slept upon on page table freeing due to rwsem anti-starvation. We work around this by predicating the mmap lock being taken on !CONFIG_ARM64 for the time being. With this patch applied, a follow up will partially revert commit fa93b45fd397 ("arm64: Enable vmalloc-huge with ptdump") and at that stage remove the arm64 ifdeffery. We also update walk_page_range_debug() to assert the mmap write lock unconditionally and update the comment here to reflect this change. The issue has existed as long as ptdump was available and vmap freed page tables when promoting to a huge leaf entry, that is, since commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") for huge ioremap, and commit 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings") for huge vmalloc. Since the former is the earlier of the two we choose that for our Fixes tag. We also define a guard class for mmap_read_trylock() so we can use cleanup.h to make the scope handling cleaner in the implementation. This patch is based on work by David Carlier (linked), with gratitude! Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-0-8cc77dcc0018@kernel.org Link: https://lore.kernel.org/20260723-series-vmap-race-fix-v6-1-8cc77dcc0018@kernel.org Fixes: b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") Signed-off-by: Lorenzo Stoakes (ARM) Reported-by: syzbot+fd95a72470f5a44e464c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6a287988.39669fcc.33b062.00a0.GAE@google.com/T/ Link: https://lore.kernel.org/linux-mm/20260706203128.162335-1-devnexen@gmail.com/ Reviewed-by: Mike Rapoport (Microsoft) Reviewed-by: Dev Jain Acked-by: David Hildenbrand (Arm) Reviewed-by: Kiryl Shutsemau Cc: Cc: Andy Lutomirski Cc: "Borah, Chaitanya Kumar" Cc: "Borislav Petkov (AMD)" Cc: Catalin Marinas Cc: Dave Hansen Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Liam R. Howlett Cc: Michal Hocko Cc: Peter Zijlstra Cc: Ryan Roberts Cc: Shakeel Butt Cc: Suren Baghdasaryan Cc: Toshi Kani Cc: "Uladzislau Rezki (Sony)" Cc: Vlastimil Babka Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 7e55ca1080f09d9f7112c7f20ac31f682c1f2374 Author: Dmitry Torokhov Date: Wed Jul 29 11:30:45 2026 -0700 Input: evdev - fix information leak in evdev_pass_values() commit 90f305f2c7a30257c683e13f4bf7c798eea992a0 upstream. In evdev_pass_values(), the input_event structure is allocated on the kernel stack and populated field-by-field. However, it is never fully initialized. On architectures where struct input_event contains explicit or implicit padding (such as the 32-bit __pad field on SPARC64), these padding bytes are left uninitialized. When this event structure is subsequently passed to the client buffer and later copied to userspace, the uninitialized padding bytes leak kernel stack memory, potentially exposing sensitive information. Similar issues exist in __evdev_queue_syn_dropped and __pass_event. Fix this by explicitly zeroing the entire event structure with memset() before populating its fields. This ensures all padding bytes are cleared before the data crosses the security boundary. Reported-by: sashiko-bot@kernel.org Cc: stable@vger.kernel.org Link: https://patch.msgid.link/ampGGKo4UMKru6f5@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 0b8ff21cbda8808c86b18f1b0ca2d0025af9a80a Author: Andy Lutomirski Date: Mon Aug 3 17:37:08 2026 -0700 mm: fix incorrect flush address in direct page table reclaim commit 478a1c3abebfc717db0d1281a9cdd7befafee542 upstream. When zap_pte_range reclaims a page table, it does: pte_free_tlb(tlb, pmd_pgtable(pmdval), addr); and this is unconditionally wrong: if this code executes, addr *always* points one past the end of the range covered by the table. The addr parameter is used to flush the TLB (really the paging-structure-cache) to drop references to the to-be-freed table, and any architecture that cares about the parameter will flush the wrong address. (But they'll still free the correct page). I think it's worth contemplating why the kernel works at all. If we hit the offending line of code, we will first clear the PMD entry (line 1954, zap_empty_pte_table), then we will issue pending flushes if force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the retry on line 1979 (phew!), and then we will do the offending pte_free_tlb call. *Or* we will clear the PMD entry immediately before pte_free_tlb (line 1983, zap_pte_table_if_empty). If we have any pending flushes (i.e. we actually zapped any last-level entries) at the time we clear the PMD entry, then the flush really ought to flush all references to the table (Linus certainly seems to think it will on all architectures [0]). The condition under which we have no accumulated flushes at the time of the clear is very complex (the whole zap_pte_range function has absurdly complex control flow). If we do hit the bad case, then we will end up clearing the PMD entry after the last time the range is flushed, and any CPU is free to cache a reference to the (empty) page table. If this happens due to an ordinary read or write, it would segfault, so it would be rare. But the cache could be speculatively filled as well. Then we'll flush the wrong address and then free and possibly reuse the table. On x86, even flushing the wrong address works on non-KPTI Intel systems because INVLPG flushes *all* paging-structure-caches, not just the ones for the target address. But INVPCID does not, and flush_tlb_one_user will use INVPCID if it's available. And then we're toast. AMD systems are more susceptible: we set the EFER.TCE bit, which makes even INVLPG only flush the target address. I think this might fix an issue in ripgrep reported here: https://github.com/BurntSushi/ripgrep/issues/3494 [0] https://lore.kernel.org/all/CA+55aFzBggoXtNXQeng5d_mRoDnaMBE5Y+URs+PHR67nUpMtaw@mail.gmail.com/T/#u Signed-off-by: Andy Lutomirski Fixes: 4c640eb4181c ("mm: move pte table reclaim code to memory.c") Cc: Liam Howlett Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Mike Rapoport Cc: Suren Baghdasaryan Cc: stable@vger.kernel.org Acked-by: Vlastimil Babka (SUSE) Acked-by: David Hildenbrand (Arm) Acked-by: Michal Hocko Acked-by: Qi Zheng Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit cc4a1a2ce0c58eafd477effb055863935260ddc1 Author: Joshua Rogers Date: Fri Jul 31 09:56:16 2026 +0200 vt: stabilize tty reference in kbd_keycode with tty_port_tty_get commit e25d47a526939ad44b75f778b8a7500562b84fc1 upstream. kbd_keycode() reads vc->port.tty without acquiring a tty reference, racing against con_shutdown() which clears port.tty under a different lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference for the duration the tty pointer is needed. Assisted-by: AISLE:Snapshot Signed-off-by: Joshua Rogers Cc: stable Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-1-be99b9da8e30@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 7bf32337a7103ccb686cbd240324bf26225ef2d6 Author: Joshua Rogers Date: Fri Jul 31 09:56:17 2026 +0200 vt: add permission check for KDSKBMETA ioctl commit a7ad0034453ba4c353f9b8f810ee2569de33d283 upstream. KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process to change meta mode on a non-controlling console without authorization. Assisted-by: AISLE:Snapshot Cc: stable Signed-off-by: Joshua Rogers Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-2-be99b9da8e30@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit fdbf547d91bf440f4077b9f495301d7ad8715a06 Author: Laurent Vivier Date: Fri Jul 31 11:27:11 2026 +0200 usbnet: cap max_mtu for drivers without bind callback commit 1505b2cb6ae1c7e8ac0c6e4590a204ffc3ab2b24 upstream. usbnet_probe() initializes max_mtu to ETH_MAX_MTU and only caps it inside the if (info->bind) block. Drivers without a bind callback never enter this block, so max_mtu stays at ETH_MAX_MTU. QEMU's usb-net device (0x0525/0xa4a2) is claimed by the cdc_subset driver which has no bind callback. The guest accepts any MTU from DHCP (e.g. 65520 from passt), leading to TCP segments that exceed the device's 2048-byte receive buffer and are silently dropped. Initialize max_mtu to net->mtu at probe time and update it inside the bind block. Fixes: f77f0aee4da4 ("net: use core MTU range checking in USB NIC drivers") Cc: jarod@redhat.com Cc: stable@vger.kernel.org Link: https://gitlab.com/qemu-project/qemu/-/issues/3268 Link: https://bugs.passt.top/show_bug.cgi?id=189 Signed-off-by: Laurent Vivier Link: https://patch.msgid.link/20260731092711.857684-1-lvivier@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 48303f3ae0fa6e102f3fc7dbf1688cc179131962 Author: Doruk Tan Ozturk Date: Sun Aug 2 14:06:02 2026 +0200 net: usb: ipheth: fix carrier_work UAF on disconnect commit fde39b8a521780391fb4e5bda2c0aa4928947f12 upstream. ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_check_work() dereferences freed memory. Tie the work to the interface state instead of chasing the completion: disable it in ipheth_close() and enable it in ipheth_open(), so a schedule_delayed_work() from the URB completion is a no-op whenever the interface is not up. disable_delayed_work_sync() also waits for a running instance, so it fully replaces the cancel_delayed_work_sync() it takes the place of. The work starts out disabled in ipheth_probe() so the enable/disable counts balance from the first open. Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and raw-gadget standing in for the device, driving the second path above (the interface is already down, so unregister_netdev() does not call ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in __run_timers(), freed by ipheth_disconnect() and re-armed from ipheth_sndbulk_callback() via queue_delayed_work_on(). The same trigger on a kernel differing only by this patch reports 0 of 15, and the carrier check still functions across open/close cycles. The reproducer needs an attached USB device that stops draining bulk OUT, plus a link down and unplug, driven as root. It is not a privilege boundary crossing and no exploit primitive was developed. Found by 0sec (https://0sec.ai). Fixes: bb1b40c7cb86 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Cc: stable@vger.kernel.org Signed-off-by: Doruk Tan Ozturk Link: https://patch.msgid.link/20260802120602.42595-1-doruk@0sec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4039cd807a5a46dc5f7618fffae926b8ad8455eb Author: Yi Cong Date: Wed Jul 29 11:04:36 2026 +0800 net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() commit 1f428e30947395d9b9aacee03e25a4e6cfcad7a4 upstream. When the interface has NETIF_F_SG enabled and skb_linearize() fails in ax88179_tx_fixup(), the function returns NULL without freeing the skb. usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop (info->flags does not set FLAG_MULTI_PACKET for this driver), jumping to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`. Because tx_fixup() returned NULL, the local skb variable in usbnet_start_xmit() is NULL, so the original skb is never freed — a memory leak on every TX frame whose linearization fails (i.e. under memory pressure). Free the skb before returning, matching the error handling already used for the pskb_expand_head() failure path in the same function. Fixes: 16b1c4e01c89 ("net: usb: ax88179_178a: add TSO feature") Cc: stable@vger.kernel.org Signed-off-by: Yi Cong Link: https://patch.msgid.link/20260729030436.3420477-1-cong.yi@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fc9e54e22845c4da29588ca0986cb7c795b5a262 Author: Sonali Pradhan Date: Mon Jul 20 16:56:54 2026 +0000 usb: gadget: f_ncm: Use unsigned int for ndp_index commit 6b1c8a9403a26cb0fed7a648916c74dc236da591 upstream. The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function. Fixes: 370af734dfaf ("usb: gadget: NCM: RX function support multiple NDPs") Cc: stable Signed-off-by: Sonali Pradhan Link: https://patch.msgid.link/20260720165654.2224591-1-sonalipradhan@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 4364486f249cfb74844ebd96a66afae8f171694f Author: Pawel Laszczak Date: Mon Jul 20 13:11:58 2026 +0200 usb: cdnsp: fix incorrect endian conversions for APB timeout register commit 50b303f3d0f7de543ee90d50879970783d06da33 upstream. readl() already returns a CPU-endian value. Passing its return value to le32_to_cpu() is therefore redundant and causes an incorrect double byte swap on big-endian systems. Similarly, writel() expects a CPU-endian value, so passing the result of cpu_to_le32() is incorrect. Remove the unnecessary conversions and operate on the MMIO register value as a CPU-endian u32. Fixes: 241e2ce88e5a ("usb: cdnsp: Fix issue with resuming from L1") Suggested-by: Arnd Bergmann Cc: stable Signed-off-by: Pawel Laszczak Acked-by: Arnd Bergmann Link: https://patch.msgid.link/20260720-endian-fix-v1-v1-1-b5681fa1ea9f@cadence.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 4e9b490e555efe697f4e9b62d1ade6c16ea1037f Author: Xu Rao Date: Mon Jul 13 17:32:37 2026 +0800 thunderbolt: icm: Preserve USB4 proxy data-valid bit commit e48844ece5e3ed1d1eb865f6da2b16f62cd9f86d upstream. The ICM USB4 switch operation request encodes two values in request.data_len_valid: bit 4 marks the data payload valid, while bits 3:0 hold the payload length in dwords. A zero length with the valid bit set represents the full 16-dword data array. icm_usb4_switch_op() sets the valid bit when a transmit payload is present. For payloads shorter than the full 16 dwords, it then assigns the length to the whole field and clears the valid bit that was just set. The payload is still copied into the request, but the descriptor sent to firmware marks that data as invalid. This affects USB4 router operations that send short payloads through the firmware connection manager. In particular, USB4 NVM writes can send a short final block when the image size is not aligned to the 64-byte proxy payload size. Firmware may then ignore or reject that final block, while full 16-dword blocks are unaffected because they are encoded as length 0 with the valid bit set. OR the short payload length into data_len_valid so the valid bit is preserved. Fixes: 9039387e166e ("thunderbolt: Add USB4 router operation proxy for firmware connection manager") Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit 0b1ea726c987b24dca4a0fd65e076d985044cdc1 Author: Lachlan Hodges Date: Tue Aug 4 11:36:39 2026 +0300 usb: xhci: use BIT_ULL for CRCR bits to fix incorrect 64bit mask commit 3d26cd1f3ff25cebd10d4b0e8188cf40dade28e9 upstream. xhci is unusable on some systems after driver switched to BIT() macro. Upper 32bits of 64bit CRCR command register are unintentionally cleared. Seen on a raspberry pi 4B compiled for arm32. The main symptoms were the following log message: [ 0.549897] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:11:39 [ 0.626859] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.626889] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 0.812619] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000200000000890 [ 0.813188] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 0.813203] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 0.813219] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 0.813602] hub 1-0:1.0: USB hub found [ 0.814052] hub 2-0:1.0: USB hub found [ 0.952714] xhci_hcd 0000:01:00.0: ERROR mismatched command completion event Additionally running lsusb just hangs. Running the same kernel compiled for aarch64 worked fine. Bisected to the commit in the Fixes line. Additionally a USB device plugged in to the USB3.0 (or 2.0) did not enumerate. Once this patch is applied the USB device enumerates properly. The CRCR register is 64 bits wide - commit abe93f27cdd7 ("xhci: use BIT macro") changed the flag definitions from (1 << n), a signed int, to BIT(n), an unsigned long. Within xhci_set_cmd_ring_deq(), the following operation is performed on the CRCR register: ... crcr &= ~CMD_RING_PTR_MASK; crcr |= deq_dma; crcr &= ~CMD_RING_CYCLE; crcr |= xhci->cmd_ring->cycle_state; ... Previously, ~CMD_RING_CYCLE was ~(int)1, a negative signed value (0xFFFFFFFE with the sign bit set). Widening a negative signed int to u64 sign-extends it to 0xFFFFFFFFFFFFFFFE, correctly clearing only bit 0 and preserving the 64-bit pointer written two lines above. After the change when running on 32 bit kernels, ~CMD_RING_CYCLE is ~(unsigned long)1UL. On a 32-bit host this is an unsigned 32-bit value (0xFFFFFFFE, no sign bit). Widening an unsigned value to u64 zero-extends it instead (0x00000000FFFFFFFE), so the subsequent AND silently clears bits 63:32 of crcr, truncating the command ring pointer that was just written before the value reaches hardware. To fix, similar to how CMD_RING_PTR_MASK is defined, make sure we use the BIT_ULL variant when defining the CRCR bits. [Mathias: use BIT_ULL() for ERST_EHB and EP_CTX_CYCLE_MASK as suggested by Michal Pecio, also include raspberry case in commit message] Fixes: abe93f27cdd7 ("xhci: use BIT macro") Cc: stable Assisted-by: Claude:claude-sonnet-5 cc: Michal Pecio Signed-off-by: Lachlan Hodges Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260804083639.2148950-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 0af047703dbed8224552587ed436f14a24371b46 Author: Aleksandr Nogikh Date: Fri Jul 31 10:15:20 2026 +0000 usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() commit c2f811314be351d86b6ab41e9297ae80d8da6f86 upstream. If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed). Fixes: 1b0e61465234 ("[PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacru") Cc: stable Assisted-by: Gemini:gemini-3.5-flash Gemini:gemini-3.1-pro-preview syzbot Reported-by: syzbot+c9dff578c3a41775176a@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c9dff578c3a41775176a Link: https://syzkaller.appspot.com/ai_job?id=75fec6f2-c8a6-43b1-b184-4d26baba86cc Signed-off-by: Aleksandr Nogikh Link: https://patch.msgid.link/91edfa4c-a63d-400c-9f00-31f3e1f98c00@mail.kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 9ad0164f78b66b0b5eca3a5748cc94dd87e28124 Author: Jiangshan Yi Date: Wed Jul 22 18:18:10 2026 +0800 usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg commit 7e22c9f79b200672f3e477421b6c9050d8cf70a5 upstream. ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT endpoint size. Both are taken independently from different endpoints in usbio_probe(), so the check is wrong when they differ. Use rxbuf_len for the IN direction. This matches the buffer that actually holds the response data. Fixes: 121a0f839dbb ("usb: misc: Add Intel USBIO bridge driver") Cc: stable Signed-off-by: Jiangshan Yi Tested-by: Antti Laakso Link: https://patch.msgid.link/20260722101810.458634-1-yijiangshan@kylinos.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 7436fb2bed66f3882784d2f3e6cb6dc341d89e26 Author: Ishaan Dandekar Date: Sun Aug 2 17:31:29 2026 +0530 usb: quirks: Add ShanWan gamepad to quirk list commit f3988e68fc089f6a5883f4f807955a3825bb7d45 upstream. The ShanWan Wireless Gamepad (dongle ID 2563:0575) crashes with a -71 EPROTO error during standard enumeration because it expects a 255-byte initial configuration request. Add this device to the quirk list to use the USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE flag. Signed-off-by: Ishaan Dandekar Cc: stable Link: https://patch.msgid.link/20260802120128.38302-1-ishaan.dandekar@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 015e71a1b565531dec1afaaa32d2585c430d04f1 Author: Nikhil Solanke Date: Wed Jul 29 01:21:57 2026 +0530 usb: core: Add quirk for 255-bytes initial config read commit 152f174a13618bec1f842d2deb69245cb2ace51f upstream. Certain third-party USB game controllers exposing (or spoofing) an Xbox 360-compatible interface (VID:PID 045e:028e) fail to enumerate under Linux. The device disconnects from the bus without responding to the initial GET_DESCRIPTOR(CONFIGURATION) request, and the kernel logs 'unable to read config index 0 descriptor/start: -71'. The device then falls back to a secondary Android HID mode (with a different VID:PID), losing XInput functionality including rumble support. The failure reproduces across multiple machines, host controller types, and kernel versions including current mainline and LTS. The device enumerates correctly and remains in XInput mode under Windows. Notably, the device enumerates correctly in Android mode when the same 9-byte request is issued for that mode's configuration descriptor, confirming the firmware bug is specific to the XInput mode. usbmon traces from Linux and Wireshark/USBPcap traces from Windows are identical up to the point of failure, with no visible protocol-level difference explaining the divergence. The root cause was identified when Michal Pecio discovered via a QEMU bus-level capture that Windows does not use wLength=9 for the initial config descriptor request; it uses wLength=255. Alan Stern subsequently confirmed this with a bus analyzer on a different USB 2.0 device, and Michal verified the behavior goes back to Windows 95 OSR2.1. So, add a new quirk flag USB_QUIRK_WINDOWS_CONFIG_REQ_SIZE which causes usb_get_configuration() to issue a 255 byte sized configuration request instead of USB_DT_CONFIG_SIZE (9) for the initial GET_DESCRIPTOR(CONFIGURATION) request, mimicking long-standing Windows behavior. This patch intentionally does not add any new VID:PID entries using this quirk. Some affected Xbox 360-compatible controllers spoof Microsoft's VID:PID, while genuine Microsoft controllers already enumerate correctly and do not require this quirk. Other affected clone devices use their own VID:PID pairs and can be added individually as they are identified. Suggested-by: Alan Stern Suggested-by: Michal Pecio Closes: https://lore.kernel.org/linux-usb/CAFgddh+JWdT4LLwMc5qjM8q_pBu-fRo2qADR5ovAKoGHWMQrRw@mail.gmail.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Acked-by: Alan Stern Signed-off-by: Nikhil Solanke Link: https://patch.msgid.link/20260728195158.65162-2-nikhilsolanke5@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit d3ed4e6321bb453757044cb9e5ecb30a33f04903 Author: Baul Lee Date: Wed Aug 5 10:34:41 2026 +0900 ALSA: usb-audio: fix OOB write on Type II inbound URBs commit 69ee44e1a23be62318189dc4b37fa4ad94053269 upstream. data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by ctx->buffer_size, so only capture is affected. fmt_type comes from the device's audio streaming descriptors, so any device advertising a Type II capture format hits this once userspace sets hw_params on the stream. KASAN on 7.2.0-rc5 (arm64) with a dummy_hcd/raw-gadget device, one report per inbound transfer: BUG: KASAN: slab-out-of-bounds in dummy_timer Write of size 64 at addr ffff0000186171c0 by task cons02/166 __asan_memcpy dummy_timer hrtimer_run_softirq Allocated by task 166: usb_alloc_coherent snd_usb_endpoint_set_params The buggy address is located 0 bytes to the right of allocated 64-byte region [ffff000018617180, ffff0000186171c0) Compute buffer_size after the delimiter packet has been accounted for, and bound the fill loop by buffer_size, as prepare_silent_urb() already does on the outbound side. This grows every Type II URB allocation by one maxsize packet. Discovered by XBOW, triaged by Baul Lee Fixes: 8fdff6a319e7 ("ALSA: snd-usb: implement new endpoint streaming model") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Link: https://patch.msgid.link/20260805013441.38245-1-baul.lee@xbow.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 810e1883d4815f29c30d900ad7333d03cc2515d1 Author: Dmitry Torokhov Date: Mon Aug 3 18:41:49 2026 -0700 Input: evdev - sanitize event type index when fetching event masks commit 3abd29c61d2ef37c4102cf755b18be53bb9dbea6 upstream. The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array. Reported-by: "Wagenaar, C.C.J. (Chris)" Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.6-flash Acked-by: Greg Kroah-Hartman Link: https://patch.msgid.link/anFCAfvxwXB5eJF1@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 164c31ee252ebd1ac8f44c2dfc5486b6d9a0379b Author: Dongli Zhang Date: Sun Aug 2 15:46:12 2026 -0700 net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() commit 3874892dd27d5387aa9a06f58d9060f18f351d24 upstream. The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit(). Fixes: 924a9bc362a5 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Cc: stable@vger.kernel.org Signed-off-by: Dongli Zhang Reviewed-by: Willem de Bruijn Acked-by: Michael S. Tsirkin Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4870189064dd1893721e4774624b1ff4df21e357 Author: Takashi Iwai Date: Fri Aug 7 10:34:16 2026 +0200 ALSA: usb-audio: Fix sticky mixer regressions on M-Audio Fast Track Ultra [ Upstream commit a8934c2c6dfd72901cf3cc0de28e85eb902a61a4 ] The recent fix for sticky mixer volumes caused regressions of M-audio Fast Track Ultra device, where the mixer state is kept to the default value. Add the quirk entries to tolerate the broken mixer behavior. As the device is known to work in the implicit feedback mode, explicitly enable the implicit feedback mode, too. Since there are two FTU models that are almost identical, both entries are added in this patch (0763:2080 and 0763:2081). Fixes: 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers") Link: https://bugzilla.suse.com/show_bug.cgi?id=1273166 Link: https://patch.msgid.link/20260807083418.1712585-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit e732c3b62465b76176d04bb08f84d401fa50f495 Author: Ali Ahmet Memis Date: Thu Aug 6 14:21:39 2026 +0000 hwmon: (corsair-psu) serialize debugfs access against hwmon [ Upstream commit 2da6050809d437a805e7a3aa22398a15073b0234 ] corsairpsu_request() sends a rail select command and then the actual read as two separate transfers, both going through the single shared cmd_buffer and wait_completion in corsairpsu_usb_cmd(). The hwmon core serializes its own callers, but the debugfs files call corsairpsu_get_value() directly and never take that lock, so a debugfs read can land between another reader's rail select and its value read. The result is a value from the wrong rail reported as the right one, because corsairpsu_usb_cmd() only checks the command echo and both transfers echo the command it expects. It can also make a caller consume the reply meant for the other one, since raw_event() writes into the shared buffer and completes whoever happens to be waiting. Locking was dropped in commit 4207069edbf0 ("hwmon: (corsair-psu) Rely on subsystem locking") on the grounds that the subsystem serializes for us, which holds for sysfs but not for these files. Take the same lock in the debugfs paths that issue commands, using the guard added in commit d1e720c7328e ("hwmon: Support guard() and scoped_guard for subsystem locks"). The lock cannot go into corsairpsu_request() itself: the hwmon core already holds it across ->read, so every sysfs read would deadlock. vendor_show() and product_show() only print strings cached during probe and issue no command, and corsairpsu_get_criticals() and corsairpsu_check_cmd_support() run before either interface is registered, so none of them need it. Fixes: 4207069edbf0 ("hwmon: (corsair-psu) Rely on subsystem locking") Signed-off-by: Ali Ahmet Memis Tested-by: Wilken Gottwalt Link: https://lore.kernel.org/r/20260806142139.168611-1-ali@iusegentoo.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 50401a9ac8ef53a146452dbab27cd7237bbb0e9f Author: Guenter Roeck Date: Wed May 13 07:14:33 2026 -0700 hwmon: Support guard() and scoped_guard for subsystem locks [ Upstream commit d1e720c7328e046049b792d03fae093d4d3a72e4 ] Add support for guard() and scoped_guard() for the hwmon subsystem lock to simplify its use. Signed-off-by: Guenter Roeck Stable-dep-of: 2da6050809d4 ("hwmon: (corsair-psu) serialize debugfs access against hwmon") Signed-off-by: Sasha Levin commit c1ab527775e04f2de360a76399e9205c2b5bd11c Author: Guenter Roeck Date: Tue Aug 4 17:30:42 2026 -0700 hwmon: (ltc4282) Fix parsing adi,current-limit-sense-microvolt [ Upstream commit 335698fd7f60b6707b21fda725f97f35fa956b07 ] ltc4282_parse_dt() evaluates the wrong variable when parsing the current limit. When the adi,current-limit-sense-microvolt property is parsed into st->vsense_max, the subsequent switch statement evaluates the unrelated val variable instead of st->vsense_max: drivers/hwmon/ltc4282.c:ltc4282_parse_dt() { ... ret = device_property_read_u32(dev, "adi,current-limit-sense-microvolt", &st->vsense_max); if (!ret) { int reg_val; switch (val) { case 12500: reg_val = 0; break; ... } Because val holds a small integer representing vin_mode (from 0 to 3), it never matches any of the valid current limit cases. This causes it to always fall through to the default error case, return -EINVAL, and aborts probe initialization for any device tree using this property. Validate st->vsense_max instead to fix the problem. Reported-by: Sashiko Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282") Cc: Nuno Sa Reviewed-by: Nuno Sá Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 046e56b53c09375ef39903514496aa5508db9729 Author: Guenter Roeck Date: Tue Aug 4 16:26:05 2026 -0700 hwmon: (ltc4282) Clamp negative current limits [ Upstream commit e253dd5f9f6d875a317895bf43ec9534ed7523cb ] When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow. Reported-by: Sashiko Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282") Cc: Nuno Sa Reviewed-by: Nuno Sá Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 87a58da555f36644812dd3e0eec7f93f7bac74f5 Author: Guenter Roeck Date: Tue Aug 4 15:42:42 2026 -0700 hwmon: (ltc4282) Avoid overflow in maximum power calculation [ Upstream commit edd11a94335747423569500a194c6eaa915f2963 ] During device initialization in ltc4282_set_max_limits(), the calculation of the maximum power limit can suffer from a 32-bit integer overflow. static int ltc4282_set_max_limits(struct ltc4282_state *st) { ... st->power_max = DIV_ROUND_CLOSEST(st->vsense_max * DECA * MILLI, st->rsense) * st->vfs_out; ... } The result of DIV_ROUND_CLOSEST() evaluates to a 32-bit unsigned integer on 32-bit architectures. This result is then multiplied by st->vfs_out, which is a 16-bit unsigned integer. According to C promotion rules, since both operands are 32-bit or smaller, the multiplication is performed in 32-bit precision. If the device is configured with a low sense resistor value via the device tree (for example, 100 nano-ohms, resulting in st->rsense = 1) and the voltage is high, the division result can reach 343,750,000 and st->vfs_out can be 33,280. The product of these values is approximately 11.44 trillion, which exceeds the maximum capacity of a 32-bit integer and overflows before being stored in st->power_max. This overflow causes a truncated value to be assigned to st->power_max and written to the hardware limit register. An incorrect maximum power limit can trigger spurious power-bad faults or alarms, which may lead to the shutdown of the monitored power rail. Avoid the problem by calculating and storing the maximum power using 64-bit variables. Reported-by: Sashiko Fixes: cbc29538dbf7d ("hwmon: Add driver for LTC4282") Cc: Nuno Sa Reviewed-by: Nuno Sá Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 1d43e4ce054ba9ad152ffa235da8f4b27a313ed9 Author: Qingshuang Fu Date: Wed Aug 5 14:16:45 2026 +0800 hwmon: (ads7828) Fix external VREF regulator handling [ Upstream commit fddb5ceaf901b050ed2a1a7deeecbf97e003435a ] The driver currently has two issues with the external VREF regulator handling in ads7828_probe(): 1. All errors from devm_regulator_get_optional() are ignored, causing the driver to incorrectly fall back to internal VREF even for transient errors like -EPROBE_DEFER or genuine failures like -ENOMEM. 2. The external regulator is never enabled. The driver calls regulator_get_voltage() without first calling regulator_enable(), so the VREF pin may remain unpowered if the regulator is not configured as always-on. Fix both issues by switching to devm_regulator_get_enable_read_voltage(), which handles regulator get, enable, and voltage read in one call. Only -ENODEV (no regulator specified in device tree) should trigger the fallback to internal VREF. All other errors are propagated to the caller. Fixes: a8ddfea09566 ("hwmon: (ads7828) Accept optional parameters from device tree") Signed-off-by: Qingshuang Fu Link: https://lore.kernel.org/r/20260805061645.1331652-1-fffsqian@163.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit e81580057e9859b06e7907934f3910cbb0863e37 Author: Wilken Gottwalt Date: Wed Aug 5 07:19:20 2026 +0000 hwmon: (corsair-psu) fix possible out-of-bounds access on missing string termination [ Upstream commit 36c4d73ce05d1d8896c2669eb0730d35a02a2ec1 ] In theory it could be possible that the REPLY_SIZE sized buffers for holding the vendor and product strings could be end up missing the null termination (for example by malicious hardware built on purpose) required by the seq_printf() call. That limits the debugfs printf calls to a maximum string length of REPLY_SIZE. Fixes: d115b51e0e567 ("hwmon: add Corsair PSU HID controller driver") Signed-off-by: Wilken Gottwalt Link: https://lore.kernel.org/r/anLj9gPWRoRDbQBV@monster.localdomain Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit f54667b0c16213285c9d9b8e3929f738b8f71826 Author: Kumar Kartikeya Dwivedi Date: Sun Aug 2 04:17:59 2026 +0200 rqspinlock: Reset tail when preserving queue on deadlock [ Upstream commit 7a3c0289c3c8eb4607dff448ae9ff9f902c813af ] Currently, the destruction of the waiter queue is suppressed for rqspinlock in cases where a deadlock is detected. Deadlock checks happen relatively frequently (on entry for AA, within 1ms for ABBA), and waiter threads may not be involved in locking scenarios involving deadlocks. Thus, it is useful to not flush the queue and let other waiters take a stab at acquiring the lock after we detect a deadlock and exit. However, we need to follow the same logic as what we did previously for the waitq_timeout label: reset the tail, and if we cannot, signal the next waiter appropriately. In case of deadlocks, this signal would just mark the MCS node as unlocked, and in case of timeouts, it would signal RES_TIMEOUT_VAL. The difference thus is in the value propagated, which decides whether the queue remains active or gets flushed. Not doing the tail reset, and waiting for the next waiter can lead to cases where we are the final waiter, and thus no next waiter arrives, leading to intermittent stalls in this path. Once the next waiter does join, we will be unblocked. In the theoretical case when the next waiter never joins, we risk stalling indefinitely. This can only happen for ABBA deadlocks, since entry into the wait queue is guarded with AA checks. A precise sequence of executions leading up to this scenario can be: CPU 0 holds lock A. CPU 1 holds lock B. CPU 2 attempts lock B, becomes the pending waiter for B. CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues. CPU 1 attempts lock A. CPU 0 detects an ABBA deadlock. Once deadlock detection happens for CPU 0, it will sit waiting for the next waiter in the queue to populate node->next, which will experience delays until such a waiter arrives. Fix this by adjusting the logic for the check for deadlocks preceding the waitq_timeout label. It would make sense to consolidate code for both cases and use 'ret' to distinguish the value being propagated, but that is left as an exercise for a future refactoring task to avoid diff noise in this patch. Fixes: 7bd6e5ce5be6 ("rqspinlock: Disable queue destruction for deadlocks") Signed-off-by: Kumar Kartikeya Dwivedi Link: https://patch.msgid.link/20260802021759.1139457-1-memxor@gmail.com Signed-off-by: Eduard Zingerman Signed-off-by: Sasha Levin commit b7949b0a7d998013b7ec8617a0ef5b07cca80be4 Author: Hongyan Xu Date: Thu Aug 6 14:06:13 2026 +0800 watchdog: at91sam9_wdt: prevent timer rearm during teardown [ Upstream commit 8444d66aa6b6e7fe0a26fa1a00a11cb4d0523783 ] at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer. Fixes: 5161b31dc39a ("watchdog: at91sam9_wdt: better watchdog support") Signed-off-by: Hongyan Xu Link: https://lore.kernel.org/r/20260806060613.1830-1-getshell@seu.edu.cn Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 8a4713fe08b06f34d2656d3a30580e0686bb6f21 Author: Maximilian Immanuel Brandtner Date: Wed Aug 5 08:22:48 2026 +0200 tls: don't abort the connection on signal-interrupted sends [ Upstream commit af0e5cdd031f4f4a8f6d4160bfbda4f36872b0ed ] When a signal interrupts a blocking send, tls_tx_records() treats the resulting -ERESTARTSYS as a transmission failure and marks the socket errored via tls_err_abort() with the raw error code. Later syscalls return the kernel-internal errno 512 (ERESTARTSYS) to userspace, as the signal it stems from is no longer pending during syscall exit and thus never translated. An interrupted send is not a connection error: the partially sent record stays queued and is resent later. Interrupt error codes are therefore excluded from the abort in the same way as -EAGAIN. Fixes: b341ca51d267 ("tls: Fix tls_sw_sendmsg error handling") Signed-off-by: Maximilian Immanuel Brandtner Link: https://patch.msgid.link/20260805063109.1772314-1-maxbr@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4d6b9cac6df5e0cfef1a66b3edd7aebdb9e4b7e7 Author: Xin Long Date: Wed Aug 5 11:18:40 2026 -0400 sctp: clear control chunk transport if it is being removed [ Upstream commit c9158ceaf27780ef64534ad72f44ffde3f8ccc49 ] sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport. Fixes: 8a07eb0a50ae ("sctp: Add ASCONF operation on the single-homed host") Reported-by: Daniele Linguaglossa Signed-off-by: Xin Long Link: https://patch.msgid.link/7e1168cb722132152a29d47e5eafaeac4a3bf6f3.1785943120.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2c5988c7349c0b64a7e0441bfc6e1dca54f7116a Author: Eric Dumazet Date: Wed Aug 5 13:15:08 2026 +0000 net/atm: fix slab-out-of-bounds read in vcc_setsockopt() [ Upstream commit d0c80dbb970439bd2eeb0e5effff8c16a5f4e1e3 ] vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+53ecc09fb81df10ef4de@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=53ecc09fb81df10ef4de Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260805131508.3227331-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 774394d27930ec4cf4cb3eed8ab6a4d20cb2430a Author: Alexandra Winter Date: Wed Aug 5 15:10:43 2026 +0200 s390/ism: Fix UAF of sba and ieq during ism_dev_exit() [ Upstream commit b1896543ce59c4258625a35cf41e23a9a1f80ea2 ] A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Signed-off-by: Alexandra Winter Link: https://patch.msgid.link/20260805131043.954639-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a294c0aa5741056093911589274fc5a23c634895 Author: Bhargava Marreddy Date: Wed Aug 5 15:10:22 2026 +0530 bnge: Fix resource leak in bnge_init_nic() error path [ Upstream commit bfec39ff1484b4e9f7d93bc4580fdb634bbc7d19 ] If bnge_init_chip() fails, bnge_init_nic() jumps to err_free_ring_grps and returns immediately, skipping cleanup for RX ring pair buffers. Remove the early return so execution falls through to err_free_rx_ring_pair_bufs to properly free resources on error. Fixes: 23df6aebf803 ("bng_en: Allocate stat contexts") Signed-off-by: Bhargava Marreddy Reviewed-by: Dharmender Garg Reviewed-by: Rajashekar Hudumula Link: https://patch.msgid.link/20260805094022.15487-1-bhargava.marreddy@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 56fd78c8c820f527f8003e379ab71004b2e79a44 Author: Hongyan Xu Date: Thu Aug 6 14:06:28 2026 +0800 ata: pata_sl82c105: fix bridge revision use-after-free [ Upstream commit 7700a31039cdc6715cb6cce7e7a664ee4e945f67 ] pci_get_slot() returns a referenced PCI device. Commit 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") replaced a configuration-space read with direct access to the cached revision field, but left that access after pci_dev_put(). The bridge may therefore be freed before its revision is read. Read the revision before dropping the reference. Fixes: 44c10138fd4b ("PCI: Change all drivers to use pci_device->revision") Signed-off-by: Hongyan Xu Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 9a482b2b117e5fa656b6d24fc01799e8ac2d4368 Author: Fan XinRan Date: Mon Aug 3 14:38:50 2026 +0000 net: thunderbolt: Tear down DMA paths before stopping the rings [ Upstream commit 68bf02b6b4ad3f748c6db71fd77b6c0402d252f4 ] tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then never clears: every teardown burns the full 500 ms timeout and __tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to 5 s does not help, so the hop is not slow to drain, it never drains at all. The failure is invisible above the thunderbolt core. __tb_path_deactivate_hops() is void and only calls tb_port_warn(); tb_path_deactivate(), tb_tunnel_deactivate() and __tb_disconnect_xdomain_paths() are void as well, and tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So tb_xdomain_disable_paths() reports success and the netdev_warn() below it never fires. Repeated teardowns eventually take the XDomain control channel down, after which the peer node is gone and only a power cycle brings the controller back. Deactivating the paths first fixes it. Measured with kretprobes on a stock v6.17 tree with no other patches applied, on a link that was up and had just carried traffic: before: __tb_path_deactivate_hop() returns 0 for the first hop, then -ETIMEDOUT for the second 500335 us later after: 0 for both, 525 us apart Alternating the two orderings ABBA over three load levels, four teardowns per arm: every teardown failed before the change (21 of 21 that ran), none failed after (0 of 24). The before arms ran short because the link died partway through. The same split shows up when the interface is enslaved to a bond instead of just brought down, which is how I ran into this in the first place. Throughput and latency after the change are unchanged. Hosts whose routers drain the hop despite the stale descriptor base see no functional difference, since the paths end up deactivated either way. Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable") Signed-off-by: Fan XinRan Acked-by: Mika Westerberg Link: https://patch.msgid.link/20260803-b4-tbnet-teardown-v2-1-27de6a13ca2d@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 764b422116d77f26c48485c949fc799f48d25d2e Author: Łukasz Patron Date: Tue Aug 4 22:18:30 2026 +0200 net: qrtr: ns: Raise lookup limit to 128 [ Upstream commit 7fc1c937b6b37c77df4ba374c37435ab06a2e945 ] Current limit of 64 is not enough for Sony Xperia 10 VII (SM6475). After merging v6.6.142 into a downstream AOSP device, it's stuck on boot animation and following log spam can be observed in dmesg: E qrtr : ctrl_cmd_new_lookup(): QRTR client node exceeds max lookup limit! E qrtr : qrtr_ns_worker(): failed while handling packet from 1:16600 No idea why it needs more than 64 client lookups, but it appears to work fine with 128 as it did when there were no limits. I don't really have a good way to investigate what it needs all these lookups for as most of the userspace is closed source. Fixes: 5640227d9a21 ("net: qrtr: ns: Limit the maximum number of lookups") Signed-off-by: Łukasz Patron Link: https://patch.msgid.link/20260804201919.1148015-1-priv.luk@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ff5bcd804b5bc5c64736b7d318c20e12ea9506b8 Author: Sidraya Jayagond Date: Mon Aug 3 09:07:01 2026 +0200 net/smc: fix TOCTOU race between smc_listen_out() and listener close [ Upstream commit 185a4caeecabc150106deda1da170b09f2ad803f ] smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_wq for the CLC handshake continue running unguarded. smc_accept_enqueue() takes a sock_hold() on the child that is never released, so the child smc_sock, its clcsock, and the reference all leak. A remote peer that opens TCP connections while the server calls close() can exhaust kernel memory. Move lock_sock_nested() to before the sk_state check so that the test and the enqueue are atomic under the listener lock. Fixes: fd57770dd198 ("net/smc: wait for pending work before clcsock release_sock") Reviewed-by: Mahanta Jambigi Signed-off-by: Sidraya Jayagond Reviewed-by: Breno Leitao Reviewed-by: Dust Li Link: https://patch.msgid.link/20260803070701.126339-1-sidraya@linux.ibm.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 0d75f2c1d0764efa756ad9c1e078d8c09ea8fc1f Author: Eric Dumazet Date: Tue Aug 4 15:20:48 2026 +0000 net: remove WARN_ON_ONCE() from sk_mc_loop() [ Upstream commit b8a39a09ae4eaae04309e1e38ed6a1101d967496 ] sk_mc_loop() can be called for sockets that are neither AF_INET nor AF_INET6 (e.g. AF_PACKET sockets when sending packets via raw/packet socket over virtual devices such as VRF or ipvlan). In such cases, sk_family is not AF_INET/AF_INET6 and sk_mc_loop() falls through the switch statement and triggers WARN_ON_ONCE(1). Non-INET sockets do not support IP_MULTICAST_LOOP or IPV6_MULTICAST_LOOP options, so loopback should default to true without generating a warning. Fixes: f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Reported-by: syzbot+22c3218a6fa219e47321@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a72024c.13623e66.bdc14.0019.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260804152048.2134341-1-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 7fa8a12296d8d5aa4b1c3904f0b354d81124cf29 Author: Pengpeng Hou Date: Fri Jul 31 22:19:06 2026 +0800 net: prestera: validate firmware header length [ Upstream commit 8ae344eb540af3f457179b52bc6061416752485c ] prestera_fw_hdr_parse() reads the firmware header before checking that the firmware image contains that header. Reject images shorter than struct prestera_fw_header before decoding the magic and version fields. Fixes: 4c2703dfd7fabb ("net: marvell: prestera: Add PCI interface support") Signed-off-by: Pengpeng Hou Acked-by: Elad Nachman Link: https://patch.msgid.link/20260731141500.1-prestera-v2-pengpeng@iscas.ac.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3a60b5af75abe8e3494ccd074fb4ae6e601a3e55 Author: Henry Martin Date: Mon Aug 3 12:36:18 2026 +0800 net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length [ Upstream commit afa58b7384913c8773d837acdb07b035690ec5d2 ] ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab. Fixes: 9771b8ccdfa6 ("net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command") Reported-by: Henry Martin Signed-off-by: Henry Martin Link: https://patch.msgid.link/20260803043618.3210301-1-bsdhenrymartin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 538e67e8c7889cf5f93951f5309d1bcb41f86036 Author: Eric Dumazet Date: Tue Aug 4 09:33:28 2026 +0000 netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() [ Upstream commit 8aecf0bbcc72605592134c917c222207d8f63ab0 ] Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. Fixes: 2a79fd3908ac ("netfilter: nf_flow_table: attach dst to skbs") Reported-by: syzbot+76d4e3a055aec3b007ec@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a71b141.9511d2ce.1fc5b9.033b.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Reviewed-by: Pablo Neira Ayuso Link: https://patch.msgid.link/20260804093328.1831847-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d974618b2097453778389d385e3741629c40e0a3 Author: Jiayuan Chen Date: Mon Aug 3 14:17:38 2026 +0800 tcp: fix TFO max_qlen accounting across reuseport migration [ Upstream commit a0ab2ba83e35159d81cec830a92e885ecf8139be ] A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen. Fixes: 54b92e841937 ("tcp: Migrate TCP_ESTABLISHED/TCP_SYN_RECV sockets in accept queues.") Signed-off-by: Jiayuan Chen Reviewed-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260803061739.134737-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 23f682083aa3fbc0c49667818efd6979a8bc5ac2 Author: Luxiao Xu Date: Tue Aug 4 22:29:01 2026 +0800 bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie [ Upstream commit 31a420a822ff92e2090bd5d65efe8e34e2d6d9b8 ] bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie") Fixes: 70d66244317e ("bpf: add bpf_tcp_gen_syncookie helper") Reported-by: Vega Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei Signed-off-by: Daniel Borkmann Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/bpf/6218aa3534d0d2d3f448fde70a8dc2769d7a8201.1785823138.git.rakukuip@gmail.com Signed-off-by: Sasha Levin commit 9e61709d8dc84d3988b847fe9cb7c74c7130cf64 Author: Qing Luo Date: Tue Aug 4 10:55:14 2026 +0800 sctp: fix addip_serial increment on ASCONF_ACK allocation failure [ Upstream commit aa2e13ae8d3cbe2c15ef4f7e971b2de0832794aa ] In sctp_process_asconf(), when sctp_make_asconf_ack() fails to allocate the ASCONF_ACK chunk due to memory pressure, the code jumps to the done label where asoc->peer.addip_serial is unconditionally incremented. This leaves the peer's ASCONF (serial N) unacknowledged while the local endpoint now expects serial N+1. When the peer retransmits serial N, it falls into the serial < addip_serial + 1 branch , which attempts to look up a cached ACK for serial N. No cached ACK exists since the allocation failed, so the retransmission is silently discarded. The peer eventually times out and ABORTs the association. Move the addip_serial increment inside the if (asconf_ack) block so that the serial number is only advanced when the ASCONF_ACK is successfully created and cached. This way, on allocation failure, the serial number is unchanged and the peer's retransmitted ASCONF will be correctly re-processed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Qing Luo Acked-by: Xin Long Link: https://patch.msgid.link/20260804025514.241767-1-l1138897701@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 39d56ee7db0b518887487f4d3af1675596f7e715 Author: Keegan Freyhof Date: Fri Jul 31 12:09:37 2026 -0700 bnxt_en: Fix PTP PPS setting bug [ Upstream commit 80eaf88efec33ac77ed7726d066c4f2f932cc329 ] The existing driver logic is always turning on PTP_CLK_REQ_PPS regardless of the "on" parameter passed to bnxt_ptp_enable(). During shutdown, PTP_CLK_REQ_PPS may be turned off and this bug will do the opposite and may trigger a PCIe PTM request TLP. On some systems this can trigger a PCIe AER. Fix it by properly configuring PTP_CLK_REQ_PPS based on the "on" parameter. Fixes: 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") Reviewed-by: Pavan Chebbi Signed-off-by: Keegan Freyhof Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260731190937.807270-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c1962ab4645a914a91ff492735881150ddc8a79e Author: Michael Chan Date: Fri Jul 31 12:09:36 2026 -0700 bnxt_en: Disable EOP for TPA on all chips to prevent data corruption [ Upstream commit c3faf548a00f4c17100cc9204746975fa46a73b9 ] EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption. Fixes: bfcd8d791ec1 ("bnxt_en: Add fast path logic for TPA on 57500 chips.") Reviewed-by: Pavan Chebbi Reviewed-by: Kalesh AP Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260731190937.807270-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 04550ca58622ca1c200c92b4e1d48bc829673113 Author: Shravya KN Date: Fri Jul 31 12:09:35 2026 -0700 bnxt_en: Refresh VNIC default ring on queue restart if needed [ Upstream commit 0b137529a8997caf67190ca1d71ba8bbdb44fbfb ] When a queue is restarted, refresh VNIC_CFG for all VNICs whose default RX ring is the restarted ring. This will eliminate this possible FW warning caused by a stale default ring in the VNIC: FW reported unknown error type 10 Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reviewed-by: Kalesh AP Reviewed-by: Pavan Chebbi Signed-off-by: Shravya KN Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260731190937.807270-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a6b1bf29ec400f2bf9b11c9239736b0427961130 Author: Shravya KN Date: Fri Jul 31 12:09:34 2026 -0700 bnxt_en: Determine and store default RX ring in vnic structure [ Upstream commit 53f01cd594e223aabb538d5288e60111523c96f2 ] Each VNIC has a default RX ring. The purpose of the default RX ring is to provide a destination for any packets that cannot be parsed by the RSS logic. Up until now, the default RX ring is always Ring 0. We neglected to take care of this default RX ring when adding the queue restart feature. If ring 0 (default ring) is re-started, it may now have a new FW ring ID after freeing the old one and allocating a new one. The VNIC now may have a stale default ring and it may generate an internal exception. This exception may appear in dmesg: FW reported unknown error type 10 The best way to resolve this issue is to use a more appropriate ring for the default ring instead of always ring 0. Ring 0 may not even be in the RSS table, especially on a new RSS context. This patch adds the logic to determine and store the proper default RX ring for a VNIC. For an RSS VNIC, the default ring is the lowest ring number in the RSS table. The next patch will add proper logic to update the VNIC if the default ring changes after queue restart. Reviewed-by: Kalesh AP Reviewed-by: Pavan Chebbi Signed-off-by: Shravya KN Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260731190937.807270-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Stable-dep-of: 0b137529a899 ("bnxt_en: Refresh VNIC default ring on queue restart if needed") Signed-off-by: Sasha Levin commit 2daf5903b946b1189c7335f95e0320cffd59b912 Author: Shravya KN Date: Fri Jul 31 12:09:33 2026 -0700 bnxt_en: Move RSS table fill outside __bnxt_hwrm_vnic_set_rss() [ Upstream commit 1d0fc6c7ea49994b8ff50d02979d1e4207ec6c4f ] This is a refactor patch with no change in behavior. The caller will now fill the RSS table before calling __bnxt_hwrm_vnic_set_rss(). In the next patch, we'll add code to determine the default ring for the VNIC when we fill the RSS table. Reviewed-by: Kalesh AP Reviewed-by: Pavan Chebbi Signed-off-by: Shravya KN Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260731190937.807270-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Stable-dep-of: 0b137529a899 ("bnxt_en: Refresh VNIC default ring on queue restart if needed") Signed-off-by: Sasha Levin commit d2897717cd222e575599d903d885c48602699800 Author: Bobby Eshleman Date: Mon Aug 3 16:47:29 2026 -0700 net/mlx5e: fix BQL reset on SQ re-activation [ Upstream commit e7386770be1bf810bcd6af39d1e4bfeab3408430 ] mlx5e_queue_start() deactivates and re-activates all channels but closes only the queue being restarted. mlx5e_activate_txqsq() then unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters of channels that kept their in-flight TX WQEs. The next completion then over-charges and trips the BUG_ON() in dql_completed(): kernel BUG at lib/dynamic_queue_limits.c:99! RIP: 0010:dql_completed+0x23d/0x280 Call Trace: mlx5e_poll_tx_cq+0x668/0xa60 mlx5e_napi_poll+0x5b/0x7b0 net_rx_action+0x15a/0x580 Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc). In the case that reset is skipped, the outstanding WQEs will eventually complete and rebalance the dql. The dql->limit is carried across the reset. Fixes: b2588ea40ec9 ("net/mlx5e: Implement queue mgmt ops and single channel swap") Signed-off-by: Bobby Eshleman Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20260803-mlx5-bql-v3-1-a30d4c66fe1d@meta.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 41661a81be9b51d94491557ba2d565c03bd57499 Author: Alok Tiwari Date: Sat Aug 1 03:09:20 2026 -0700 bnge: use int for bnge_fix_rings_count() return value [ Upstream commit 2cbd8a4e5e09aa232a1f8d56ce3d070b18ab2b10 ] bnge_fix_rings_count() returns 0 on success or a negative errno on failure However, bnge_adjust_rings() stores its return value in a u16 variable, causing negative error codes such as -ENOMEM to be converted to a large positive value. Use an int for the return code variable so that error values are preserved and propagated correctly. Fixes: 627c67f038d2 ("bng_en: Add resource management support") Signed-off-by: Alok Tiwari Reviewed-by: Bhargava Marreddy Link: https://patch.msgid.link/20260801100923.1498570-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 937f785910ce5df0db911c5541548fddc2a6df21 Author: Stefan Agner Date: Mon Aug 3 11:51:56 2026 +0200 net: stmmac: resume PHY before hardware setup when opening the interface [ Upstream commit 06232cb44bc8e81adc2f1d40a01bed830b607ea2 ] Since the referenced commit, changing the MTU on a running interface no longer disconnects and reconnects the PHY; __stmmac_release() merely stops phylink, which also suspends the PHY (BMCR power-down) when WoL is not enabled. __stmmac_open() then performs the DMA software reset in stmmac_hw_setup() before phylink_start() resumes the PHY again. IEEE 802.3 22.2.4.1.5 allows a PHY to stop its receive clock while powered down, and stmmac requires a running receive clock for the DMA software reset to complete (the phylink config sets mac_requires_rxc). On such setups, e.g. the RK3566-based Home Assistant Green with an RTL8211F-VD PHY in RGMII mode, any runtime MTU change now times out and leaves the interface dead: rk_gmac-dwmac fe010000.ethernet end0: Failed to reset the dma rk_gmac-dwmac fe010000.ethernet end0: stmmac_hw_setup: DMA engine initialization failed rk_gmac-dwmac fe010000.ethernet end0: __stmmac_open: Hw setup failed rk_gmac-dwmac fe010000.ethernet end0: failed reopening the interface after MTU change In the field this is triggered by NetworkManager applying an MTU while activating the connection, breaking networking entirely. The same regression has also been reported on i.MX8MP and reproduced on SoCFPGA based systems. Resume the PHY in __stmmac_open() before the hardware setup, making it the counterpart of the phylink_stop() in __stmmac_release(), like stmmac_resume() already does for the same reason. phylink_start() also resumes the PHY, but only after stmmac_hw_setup(), and it cannot be moved before the hardware setup since it may bring the link up immediately from a workqueue, racing with the initialization (see the comment in stmmac_resume()). For the regular ndo_open path the PHY has just been attached and is not suspended, in which case phylink_prepare_resume() does nothing. Fixes: db299a0c09e9 ("net: stmmac: move PHY handling out of __stmmac_open()/release()") Link: https://github.com/home-assistant/operating-system/issues/4858 Tested-by: Alexander Stein Signed-off-by: Stefan Agner Tested-by: Maxime Chevallier Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20260803095156.132827-1-stefan@agner.ch Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6db775482108df36569865860ac978e442e87e3b Author: Martin Kaiser Date: Tue Aug 4 21:46:35 2026 +0200 selftests/ftrace: refactor eprobes test to fix argument checks [ Upstream commit 6e3abef2a27e7402a94111c9eff85d887e64a309 ] The add/remove eprobe test installs an eprobe for the openat syscall and runs ls. It checks the filenames that were opened by ls against a whitelist and a blacklist. Commit 206b25c09080 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer") fixed access to some string fields in eprobes. This triggers test failures as the blacklist does not allow relative paths for the openat parameters. What makes this test unstable is the fact that the openat calls vary a lot between different systems. Refactor the test to make it more robust. "cd " will issue a chdir syscall with the target directory as parameter. Set an eprobe on the sys_enter_chdir event and filter for the exact directory name. Allow (fault) as fallback. Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/ Fixes: 206b25c09080 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com Signed-off-by: Martin Kaiser Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit eeaddd910841f967e14bad69e4be7a6f81b4467c Author: Guenter Roeck Date: Tue Aug 4 14:12:31 2026 -0700 hwmon: (pmbus/lm25066) Fix PMBus coefficient calculations [ Upstream commit 0dabe8a56f772f0ece46d2597799f412c277d874 ] In lm25066_probe(), the PMBus coefficients for current and power are scaled based on the shunt resistor value. The calculation evaluates the multiplication using 32-bit arithmetic because info->m is an int and shunt is a u32: static int lm25066_probe(struct i2c_client *client) { ... info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000; info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000; ... } For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device tree shunt-resistor-micro-ohms value exceeding approximately 159,000 (159 mOhm, which is physically valid for low-current applications) causes the intermediate product to exceed UINT_MAX (4,294,967,295). This results in a silent wraparound before the division by 1000. Furthermore, if the wrapped value has the most significant bit set, converting it back to the signed int info->m results in negative coefficients. This logic error leads to drastically corrupted current and power readings, which can cause erratic thermal or power management behavior in the system. Fix the problem by using 64-bit operations for the multiply/divide operations. This can still overflow, but only for unreasonably large shunt resistor values. Reported-by: Sashiko Fixes: 94ee5fcc240fe ("hwmon: (pmbus/lm25066) Support configurable sense resistor values") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit c36f2c22ffdf52d690f689c6747431f9a0cac91e Author: Qingshuang Fu Date: Tue Aug 4 15:48:42 2026 +0800 hwmon: (nzxt-smart2) Check return value of init_device() in probe [ Upstream commit d533882ce1060866a590257f2c77ee23eabef5b8 ] The init_device() call in nzxt_smart2_hid_probe() can fail because it sends HID output reports to the hardware to detect fans and set the update interval. If the hardware is not responding or the HID reports fail, init_device() returns a negative error code. However, the return value was ignored, causing the probe to continue and register an hwmon device even though the device was never properly initialized. This leads to an inconsistent state where the driver reports stale data or blocks on wait queues that will never be woken. The same function's return value is already checked in the reset_resume() handler, confirming the author's intent that errors should be propagated. Note that this fix was not possible before commit 59d104b54b0b ("hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop") because the out_hw_close error path was missing hid_device_io_stop(), which would have opened a use-after-free risk window. Fixes: 53e68c20aeb1 ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.") Signed-off-by: Qingshuang Fu Link: https://lore.kernel.org/r/20260804074842.505923-1-fffsqian@163.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 961d25b77dd083220524e0b403573ae3e7d73137 Author: Marcin Bernatowicz Date: Thu Jul 9 09:59:45 2026 +0200 drm/xe/uc: Apply RCS/CCS yield policy to SR-IOV VFs [ Upstream commit d1643db3b037b57f2af7f85c3821d6fe69c492f6 ] VFs were missing the call to apply the global scheduling policy. Call xe_guc_submit_enable() during vf_uc_load_hw() to ensure VFs get the same policy enforcement as PF. Fixes: 26caeae9fb48 ("drm/xe/guc: Set RCS/CCS yield policy") Suggested-by: Michal Wajdeczko Signed-off-by: Marcin Bernatowicz Cc: Daniele Ceraolo Spurio Cc: Michal Wajdeczko Reviewed-by: Daniele Ceraolo Spurio Link: https://patch.msgid.link/20260709075945.1337660-1-marcin.bernatowicz@linux.intel.com Signed-off-by: Michał Winiarski (cherry picked from commit f09360e857130f7ab7f069e2421e6b4a6e502531) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit 410596743958fbddeb845ff3efe2645397d7c7e2 Author: Michał Winiarski Date: Wed Jun 24 13:14:20 2026 +0200 drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() [ Upstream commit c5f500161709f27719701334190dff2325868ef0 ] The q->replay_state is blindly overwritten, which can potentially leak memory that was previously allocated by vmemdup_user(). Return an error if q->replay_state is not empty. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Reported-by: Martin Hodo Fixes: 1026c1a73a96 ("drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE") Reviewed-by: Matthew Brost Link: https://patch.msgid.link/20260624111421.1258364-1-michal.winiarski@intel.com Signed-off-by: Michał Winiarski (cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit a81f9c44d87fb59d99fce72e29e02cab3a49a1c3 Author: Jamal Hadi Salim Date: Sat Aug 1 08:56:32 2026 -0400 net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers [ Upstream commit a347304b2ca1a5377d5bd2d8a72e4b4f12afe648 ] Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its change() call failed on the PoC's empty options) and dropped its create and insert refs, flower's put is the last one and drops u32_tp's refcnt to zero. At this point tp->ops->destroy() runs in a context that never took rtnl_lock. When that happens, it might cause a UAF like the following (illustrated by the PoC): [ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393) [ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524 Call Trace: u32_init (net/sched/cls_u32.c:393) tc_new_tfilter (net/sched/cls_api.c:2378) Allocated by task 526: u32_init (net/sched/cls_u32.c:378) tc_new_tfilter (net/sched/cls_api.c:2378) Freed by task 522: kfree u32_destroy (net/sched/cls_u32.c:662) tcf_proto_destroy (net/sched/cls_api.c:446) tcf_proto_put (net/sched/cls_api.c:459) tc_new_tfilter (net/sched/cls_api.c:2459) Fix this by having tcf_proto_destroy() take rtnl_lock around tp->ops->destroy() for locked classifiers whenever rtnl is not held. To explain why I used a temp variable "not_lockless" I'd like to point to a semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here for future cleanup if deemed necessary): The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are redundant sources of truth for whether rtnl_lock is held. Among the nine classifier destroy(..rtnl_held..) callbacks, only flower consults the rtnl_held parameter which it propagates to tc_setup_cb_destroy() and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic, fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy() (u32, bpf, mall) hardcode true always instead of forwarding the parameter. A future cleanup should remove the rtnl_held parameter from the destroy callback signature entirely and have callers rely solely on their knowledge whether they are running in an unlocked context. Fixes: 12db03b65c2b ("net: sched: extend proto ops to support unlocked classifiers") Reported-by: Feng Xue Tested-by: Victor Nogueira Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260801125632.360365-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 9b8cfbb58b85bfa7a78fac47fdc77396cd01f699 Author: Cen Zhang (Microsoft) Date: Thu Jul 30 18:20:06 2026 -0400 net/openvswitch: check Ethernet header length in key_extract() [ Upstream commit cf6f8b29befb92173659bcef6a441d274947bfae ] When a packet arrives on an ARPHRD_NONE device (e.g. TUN), ovs_flow_key_extract() trusts the user-provided skb->protocol field: if it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes for MAC addresses and parse_ethertype() pulls 2 more, either of which triggers a kernel BUG in __skb_pull() when the linear area is too small. kernel BUG at include/linux/skbuff.h:2848! RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933 ovs_flow_key_extract+0x419/0xa70 ovs_vport_receive+0x222/0x390 netdev_frame_hook+0x3e0/0x630 tun_get_user+0x2d0c/0x38e0 Fixed by calling check_header() in key_extract() before accessing the Ethernet header. Fixes: 217ac77a3c25 ("openvswitch: allow L3 netdev ports") Reported-by: AutonomousCodeSecurity@microsoft.com Reviewed-by: Eelco Chaudron Signed-off-by: Cen Zhang (Microsoft) Reviewed-by: Ilya Maximets Link: https://patch.msgid.link/20260730222006.118652-1-blbllhy@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 9a3eb77a612f9d158e4d27df43677a014e9cfa55 Author: Jia Jia Date: Sun Jul 26 22:43:14 2026 +0800 vhost-scsi: reject feature changes after endpoint [ Upstream commit 42bc45df5905e2b7dccb72adaf7730f66cfbe03f ] vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chained+0x59/0xf0 ? __pfx_sg_pool_alloc+0x10/0x10 ? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi] vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi] ? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi] vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi] vhost_run_work_list+0x8e/0xd0 [vhost] vhost_task_fn+0xe1/0x210 ret_from_fork+0x348/0x540 RIP: 0010:0x4 CR2 = 0x4 RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202 RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081 VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only exception. Reject changes to any feature other than VHOST_F_LOG_ALL while the endpoint is active. This preserves the existing runtime log toggle while preventing feature-dependent command resources and data-path state from becoming inconsistent. Userspace must clear the endpoint before changing any other negotiated feature and set the endpoint up again afterward. Fixes: bf2d650391be ("vhost-scsi: Allocate T10 PI structs only when enabled") Signed-off-by: Jia Jia Reviewed-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin Message-ID: <20260726144314.1652934-1-physicalmtea@gmail.com> Signed-off-by: Sasha Levin commit f8fe3f8d342da750dd10361bf66009fd3072926b Author: Linfeng Sun Date: Mon Jul 27 16:18:41 2026 +0800 vhost-scsi: Validate T10 PI scatterlist counts [ Upstream commit d876c493fc4b811941bfeb4c80beb2dfc4bf025e ] When T10 PI is negotiated, vhost-scsi splits protection bytes from the data iterator before mapping the request scatterlists. A malformed request can claim protection bytes that cover or exceed the full payload length. The former leaves no data bytes to map, while the latter underflows exp_data_len before advancing the iterator. Both cases can let a zero data SGL count reach sg_alloc_table_chained(), which triggers BUG_ON(!nents). Reject protection lengths that cover or exceed the payload before subtracting prot_bytes and advancing the iterator. Also propagate negative errors from the protection SGL calculation before calling the allocator, matching the data SGL path. Fixes: bca939d5bcd0 ("vhost-scsi: Dynamically allocate scatterlists") Suggested-by: Jia Jia Signed-off-by: Jia Jia Assisted-by: OpenAI-Codex:GPT-5 Signed-off-by: Linfeng Sun Message-ID: <20260727081841.923151-1-slf@hdu.edu.cn> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit a1ae353d8355407c1bea971d1c1af5e7f242bb7d Author: Toke Høiland-Jørgensen Date: Wed Jul 29 21:14:16 2026 +0200 net/sched: sch_cake: drop WARN_ON(1) for malformed packets in ACK filter [ Upstream commit 2a33516f9ef59ad11844d4fc152f889449b5daf3 ] The sch_cake ACK filter parses packets to find the TCP header and filter duplicated ACKs if the flow is backlogged. The parsing code contains a WARN_ON(1) which can be triggered by a malformed IP header in certain cases. Depending on the system configuration, this leads either to either spamming dmesg with warnings, or a panic if panic_on_warn is set. The code already correctly skips the offending packet in the branch that triggers the warning, so the WARN_ON itself doesn't really serve any purpose. So just drop it altogether to avoid the inconvenient side effects. Fixes: 8b7138814f29 ("sch_cake: Add optional ACK filter") Reported-by: Zhiling Zou Reported-by: Ren Wei Signed-off-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20260729191417.45665-1-toke@toke.dk Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 588d4a6795d99d080f74ef0b5f391ea8c453ae5d Author: Xuanqiang Luo Date: Thu Jul 30 17:35:54 2026 +0800 udp: fix potential use-after-free in tunnel segmentation [ Upstream commit d0f86fb36eb260abd10007b62c9dcc1028e03e61 ] __skb_udp_tunnel_segment() gets the UDP header before ensuring the tunnel header is in the skb head. If the pull reallocates skb->head, the saved UDP header pointer is no longer valid. Get the UDP header after the pull to avoid a potential use-after-free. Fixes: dbef491ebe7f ("udp: Use uh->len instead of skb->len to compute checksum in segmentation") Signed-off-by: Xuanqiang Luo Reviewed-by: Antoine Tenart Link: https://patch.msgid.link/20260730093554.68127-1-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 83ef2f3cab7fe6dd9155cd598dc64be524d963a9 Author: Alok Tiwari Date: Fri Jul 31 12:22:59 2026 -0700 bnge: Fix NULL pointer dereference in aux device release [ Upstream commit 1cb4298810e27e037d3ca07286ecbb97e89ba58d ] If allocation of auxr_dev fails during auxiliary device setup, the error path calls auxiliary_device_uninit(), which eventually invokes bnge_aux_dev_release(). The release callback unconditionally dereferences aux_priv->auxr_dev->pdev to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated on this failure path, the dereference results in a NULL pointer exception Retrieve the parent bnge_dev from the auxiliary device's parent instead of auxr_dev, and free auxr_dev only when it was successfully allocated. This allows the release callback to correctly clean up partially initialized auxiliary devices. Fixes: 8ac050ec3b1c ("bng_en: Add RoCE aux device support") Signed-off-by: Alok Tiwari Reviewed-by: Bhargava Marreddy Link: https://patch.msgid.link/20260731192301.1427645-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0cc7aa6e0d19027fdd42e6fbd156267ac1e3bbba Author: Stanislav Fomichev Date: Mon Jul 27 09:19:59 2026 -0700 xsk: validate metadata when processing requests [ Upstream commit 849b1664dbda1cf6c63e0fd4f9dec23782b8c851 ] The zero-copy path validates TX metadata while obtaining the descriptor context, then reads it again later when preparing the hardware request. User space can change the metadata between those operations and bypass the original validation. Validate the metadata in xsk_tx_metadata_request() and use the resulting flags snapshot for every feature check. Read request fields once so all zero-copy drivers process only values observed after successful validation. Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata") Cc: Cen Zhang (Microsoft) Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-7-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7806d4885c5316330b31cf295809f3e67f91f4d8 Author: Stanislav Fomichev Date: Mon Jul 27 09:19:58 2026 -0700 xsk: move xsk_tx_metadata_request() to xdp_sock_drv.h [ Upstream commit ddd0d6c5bfe2fef7c7cf31f62265f29b7b9eb9ef ] xsk_tx_metadata_request() must validate metadata with xsk_buff_valid_tx_metadata(), which is defined in xdp_sock_drv.h. Move the helper there before adding that dependency. All callers already include the destination header, so this has no functional effect. Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata") Cc: Cen Zhang (Microsoft) Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-6-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bc63d47611c07b0d5d655fe1a590861931527920 Author: Stanislav Fomichev Date: Mon Jul 27 09:19:57 2026 -0700 xsk: validate launch-time metadata size [ Upstream commit 439ce2dddf3d22129b9113a7881637256a35e936 ] Launch-time metadata extends beyond the first 16 bytes of struct xsk_tx_metadata. Reject the request when the registered metadata area does not contain the complete field. Snapshot the validated flags for the generic transmit path and use that snapshot for request and completion processing, avoiding inconsistent decisions if user space changes the flags concurrently. Note that only xsk_skb_metadata is properly using the flags, __xsk_buff_get_metadata ignores them. Next commits address that. Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata") Cc: Cen Zhang (Microsoft) Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-5-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit eb4c613d4ebc3f664e70d572b8867ba114a8754e Author: Stanislav Fomichev Date: Mon Jul 27 09:19:56 2026 -0700 xsk: clear metadata pointer when no timestamp is requested [ Upstream commit 9f60a67df8d3c862503bee62bada8e7089cba438 ] User space can change metadata flags after request processing. Rereading them during completion can therefore make the kernel write a timestamp that was not requested when the packet was submitted. Clear the metadata pointer during request processing unless timestamp completion is requested. Completion handling can then use the pointer itself instead of rereading the flags. On the mlx5 multi-packet WQE path metadata is evaluated per batch: xsk_tx_metadata_request() runs only for the descriptor that starts a session, just like the checksum offload that is applied once through the shared WQE. Only that descriptor's pointer is reset, so completion handling can record a timestamp for the other descriptors of the session regardless of their own XDP_TXMD_FLAGS_TIMESTAMP bit. The write stays inside the metadata area; the single-WQE, other zero-copy, and generic paths reset the pointer per descriptor and are unaffected. Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata") Cc: Cen Zhang (Microsoft) Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-4-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8948aab6c349bf5f3351de2d490c7d2300866aed Author: Stanislav Fomichev Date: Mon Jul 27 09:19:55 2026 -0700 xsk: pass TX metadata pointer by reference [ Upstream commit 19366db6dfccac9b0867a151678cd7b89fb8fd99 ] Completion handling needs to know whether a timestamp was requested when the metadata was processed. Let xsk_tx_metadata_request() update the caller's metadata pointer so that decision can be carried forward without rereading user-controlled flags. This only changes the interface; behavior remains unchanged. Fixes: ca4419f15abd ("xsk: Add launch time hardware offload support to XDP Tx metadata") Cc: Cen Zhang (Microsoft) Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-3-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit cfb9d2976b277e554e28c165e3eff4b4a8ea10bd Author: Stanislav Fomichev Date: Mon Jul 27 09:19:54 2026 -0700 xsk: require at least 16 bytes of TX metadata [ Upstream commit 1bb30b181d9f0484e141f8411e15ed906d5c6780 ] AF_XDP accepts a TX metadata length as small as eight bytes, but every supported request needs the flags plus at least one eight-byte request field. Such short metadata also lets the kernel read beyond the registered area. Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve compatibility with applications that do not use launch-time metadata. Fixes: 341ac980eab9 ("xsk: Support tx_metadata_len") Reported-by: AutonomousCodeSecurity@microsoft.com Reported-by: Cen Zhang (Microsoft) Link: https://lore.kernel.org/netdev/20260720155210.34229-1-blbllhy@gmail.com/ Signed-off-by: Stanislav Fomichev Link: https://patch.msgid.link/20260727161959.885642-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b478ff6edf58ad7dddb3a36b24ccbbba9b51c768 Author: Will Chen Date: Wed Jul 29 15:01:31 2026 -0700 bnxt: fix memory leak in bnxt_queue_mem_alloc error cases [ Upstream commit d1000fd7995e51deec872d154e0a40d82f7a539f ] There is a small memory leak in bnxt_queue_mem_alloc: when bnxt_alloc_rx_agg_bmap() succeeds but bnxt_alloc_one_tpa_info() later fails, the rx_agg_bmap allocated by bnxt_alloc_rx_agg_bmap() is not freed in the fallthrough cleanup cases. Free the rx_agg_bmap in the err_free_rx_agg_ring case and initialize clone->rx_agg_bmap = NULL earlier in the function to allow for safe fallthrough. Fixes: bd649c5cc958 ("bnxt_en: handle tpa_info in queue API implementation") Signed-off-by: Will Chen Reviewed-by: Joe Damato Reviewed-by: Michael Chan Link: https://patch.msgid.link/20260729220132.1256924-1-will.chen.tty@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d01923852e5275dee0c8fbc59620c28579f9bd91 Author: Nathan Gao Date: Fri Jul 24 20:08:06 2026 -0700 tcp: do not change rcv_ssthresh in tcp_measure_rcv_mss() [ Upstream commit 0e125ecfe20c077625cf0be8d750d5c3abc0dce9 ] Commit f5da7c45188e ("tcp: adjust rcvq_space after updating scaling ratio") replaced the direct window_clamp update in tcp_measure_rcv_mss() with a call to tcp_set_window_clamp(), a helper that implements the TCP_WINDOW_CLAMP setsockopt. As a side effect, the helper also shrinks rcv_ssthresh via __tcp_adjust_rcv_ssthresh(). As a result, each scaling_ratio decrease detected by tcp_measure_rcv_mss() also cuts rcv_ssthresh. Elsewhere in TCP, rcv_ssthresh is usually cut under memory pressure and grows via tcp_grow_window(). Flows whose segment sizes vary keep scaling_ratio oscillating, which leads to an unstable rcv_ssthresh: a dip of rcv_ssthresh only recovers via tcp_grow_window(), keeping the advertised window at a relatively low level even after the ratio itself has recovered, and can even stall the sender. Observed on a customer's proxy gateway after upgrading from kernel 6.1 to 6.12: in the worst case, rcv_ssthresh was cut in half by a scaling_ratio dip. P99 latency jumped from <10ms on 6.1 to ~100ms on 6.12, and almost returned to the 6.1 level with this patch applied. Restore the plain WRITE_ONCE() update of window_clamp, as introduced in commit a2cbb1603943 ("tcp: Update window clamping condition"), and keep the rcvq_space.space adjustment. Now rcv_ssthresh is decoupled from scaling_ratio changes in tcp_measure_rcv_mss(). Fixes: f5da7c45188e ("tcp: adjust rcvq_space after updating scaling ratio") Signed-off-by: Nathan Gao Link: https://patch.msgid.link/20260725030806.28135-1-zcgao@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0b121de89a99c54bcf516999b04e8531c84f08d5 Author: Guenter Roeck Date: Thu Jul 23 10:57:35 2026 -0700 hwmon: (pmbus) Fix type confusion in notification logic [ Upstream commit 59bd68ab05a8f9c9a60b6ec44682084184803ff4 ] Sashiko reports: At the start of the loop in pmbus_notify(), the code unconditionally casts every attribute to a struct sensor_device_attribute: drivers/hwmon/pmbus/pmbus_core.c:pmbus_notify() { for (i = 0; i < data->num_attributes; i++) { struct device_attribute *da = to_dev_attr(data->group.attrs[i]); struct sensor_device_attribute *attr = to_sensor_dev_attr(da); int index = attr->index; ... } However, data->group.attrs can contain other types like struct pmbus_samples_reg or struct pmbus_sensor, which only embed a base struct device_attribute. If da is a struct pmbus_samples_reg, dev_attr is the last member. Casting it to struct sensor_device_attribute and reading the index field appears to access memory past the end of the allocation, which might trigger a slab-out-of-bounds read. Additionally, if da is a struct pmbus_sensor, casting it causes the index field to overlap with the page, phase, and reg fields. Could this produce a garbage mask on little-endian systems that spuriously matches the target reg, page, and flags during an alert? Fix the problem by using struct sensor_device_attr in struct pmbus_sensor and struct pmbus_label. Since those attributes never trigger a notification, set the value of attr->index to -1 for them. Use this value to distinguish from boolean attributes which _can_ trigger a notification and use the index field to encode mask, page, and register values. Fixes: f469bde9afd1 ("hwmon: (pmbus/core) Notify hwmon events") Cc: Vincent Jardin Tested-by: Vincent Jardin Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 5112365c682065d309efefff87615e7eac21b5b4 Author: Guenter Roeck Date: Mon Aug 3 11:40:50 2026 -0700 hwmon: (pmbus/core) Avoid race condition during probe [ Upstream commit 71638a456852a18a4578f52d51926ba1d223053b ] pmbus_write_smbalert_mask() is not guarded, which can cause race conditions with concurrent sysfs attribute accesses. Similar, PMBus accesses in pmbus_init_debugfs() are not guarded, also resulting in potential race conditions. Add guards to both functions to prevent the races. Reported-by: Sashiko Fixes: 221819ca4c36e ("hwmon: (pmbus/core) Add interrupt support") Fixes: 1e069dfd96dfe ("hwmon: (pmbus) Add debugfs for status registers") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 6c8a9f7bc00301e533a5366384f3070a8e7f8430 Author: Christian Borntraeger Date: Mon Jul 6 16:15:37 2026 +0200 vdpa/mlx5: Fix buffer length in create_direct_keys() [ Upstream commit 727e1f569855df83579edbd73dcb4a0723543a12 ] We have seen in our CI the following KASAN message: BUG: KASAN: slab-out-of-bounds in cmd_exec+0x550/0xca0 [mlx5_core] Read of size 272 at addr 0000000176795020 by task qemu-system-s39/82764 [...] [<000011388ab3a7a0>] cmd_exec+0x550/0xca0 [mlx5_core] [<000011388ab3b61c>] mlx5_cmd_exec_cb+0x25c/0x4f0 [mlx5_core] [<000011388b21e82e>] mlx5_vdpa_exec_async_cmds+0x22e/0x5e0 [mlx5_vdpa] [<000011388b21fd44>] create_direct_keys+0x954/0xef0 [mlx5_vdpa] [...] The buggy address is located 4128 bytes inside of allocated 4384-byte region [0000000176794000, 0000000176795120) So in essence we read 16 bytes beyond 4384-byte allocation. create_direct_keys calculates the pointer and length for in and out buffers. The size calculation for in includes the entire structure size (out + in + mtt[]) but the pointer passed to cmd_exec points only to the 'in' field, skipping the 'out' field. This causes mlx5_copy_to_msg() to read beyond the allocated buffer by sizeof(out) bytes when copying command data. Properly calculate the input size to match the pointer and allocation size. Fixes: 0071b138d44a ("vdpa/mlx5: Create direct MKEYs in parallel") Signed-off-by: Christian Borntraeger Tested-by: Dragos Tatulea Reviewed-by: Dragos Tatulea Signed-off-by: Michael S. Tsirkin Message-ID: <20260706141537.3510294-1-borntraeger@linux.ibm.com> Signed-off-by: Sasha Levin commit bb9122ba4dc4cc13f1ad3448c8f2685b5438134a Author: Yousef Alhouseen Date: Wed Jun 24 15:02:02 2026 -0700 vhost/vdpa: reject overflowing PA map page counts on 32-bit [ Upstream commit 0619aaa34c0c2a2dcb07f0e9c8a34e7efb8c4cdf ] vhost_vdpa_pa_map() adds the IOVA page offset to the user-controlled map size before computing the number of pages to pin. On 32-bit systems, where unsigned long is narrower than u64, that addition can overflow and the code can pin and map fewer pages than the requested IOTLB range. Reject sizes that overflow the unsigned long page-count calculation. Fixes: 22af48cf91aa ("vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()") Acked-by: Michael S. Tsirkin Signed-off-by: Yousef Alhouseen Signed-off-by: Michael S. Tsirkin Message-ID: Signed-off-by: Sasha Levin commit ae128dd19040ee06a4f8143c7ced4d18080d7a9a Author: Linfeng Sun  Date: Sat Jun 20 21:00:05 2026 +0800 vhost_iotlb: bound map allocation in add_range [ Upstream commit 1ed35ac7f3fe2b4396bdd29ac3a7f0ebc0829e94 ] vhost_iotlb_add_range_ctx() only retires an old entry when the table has a non-zero limit, has exactly reached that limit and has VHOST_IOTLB_FLAG_RETIRE set. Non-retiring tables can keep allocating entries after reaching their configured limit. Existing vhost devices allocate their IOTLB with max_iotlb_entries from vhost.c, which defaults to 2048 and is tunable by module parameter. Use the caller-provided limit at the allocation point instead of adding a separate default in the common IOTLB helper, and reject non-positive values in vhost paths that can report an error. Other vhost IOTLB users should not create zero-limit tables when entries can be populated from userspace or guest-controlled requests. Add caller-side max_iotlb_entries parameters for mlx5 vDPA, VDUSE and vhost-vDPA. Reject non-positive VDUSE and vhost-vDPA values, and require at least two entries for vdpa_sim and mlx5 vDPA paths that install full-range mappings, since those mappings are split into two IOTLB entries. Handle full-range mappings in the common helper by checking that the IOTLB can hold both split entries before inserting the first half. This avoids returning an error after leaving a half mapping behind. When the table is full, keep the existing retire behavior for retiring tables and return -ENOSPC for non-retiring tables. Reuse the retired map node instead of freeing it and allocating a replacement, so a stream of IOTLB updates cannot keep forcing GFP_ATOMIC allocations after the table has reached its limit. If a zero-limit IOTLB still reaches the common helper, treat it as a configuration error and return -EINVAL. I found this bug myself, though the patch was written with AI assistance. Fixes: 0bbe30668d89 ("vhost: factor out IOTLB") Assisted-by: OpenAI-Codex:GPT-5 Signed-off-by: Linfeng Sun  Message-ID: Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin commit 95dc716ca52b2ecb7b270e18cd96c92b5165d4a0 Author: Rong Zhang Date: Fri Jul 31 21:45:05 2026 +0800 ALSA: usb-audio: Add QUIRK_FLAG_MIXER_GET_CUR_BROKEN for Logitech PRO X 2 LIGHTSPEED [ Upstream commit c973e61895db8fe4a69d8b33de92068d135cafd8 ] The UAC mixer of the Logitech PRO X 2 LIGHTSPEED has broken mixer GET_CUR behavior but otherwise works fine. Add a quirk table entry matching VID/PID=0x046d/0x0af7 and apply the MIXER_GET_CUR_BROKEN quirk flag to make the mixer usable again. Quirky device sample (after applying the quirk flag): usb 3-2.1: New USB device found, idVendor=046d, idProduct=0af7, bcdDevice= 1.00 usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-2.1: Product: PRO X 2 LIGHTSPEED usb 3-2.1: Manufacturer: Logitech usb 3-2.1: SerialNumber: 0000000000000000 usb 3-2.1: 2:0: broken mixer GET_CUR (-18944/0/256 => -2662) usb 3-2.1: 6:0: broken mixer GET_CUR (-18944/0/256 => 0) Fixes: 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers") Suggested-by: Brian van den Berg Reported-by: Brian van den Berg Link: https://lore.kernel.org/all/370007e6-b73b-4bfc-8410-a860781c7ad7@proton.me/ Signed-off-by: Rong Zhang Link: https://patch.msgid.link/20260731-uac-lg-pro-x-2-ls-v1-1-268eaefe66ab@rong.moe Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit e3668bb2d152ce3a598579f210a71ecb633bbc42 Author: Rong Zhang Date: Sun May 31 23:45:20 2026 +0800 ALSA: usb-audio: Add QUIRK_FLAG_MIXER_GET_CUR_BROKEN [ Upstream commit ad2c7d2c42af943a3e711bdc1e4fd55b76fcbe55 ] Since commit 86aa1ea1f15c ("ALSA: usb-audio: Do not expose sticky mixers"), the UAC mixer core utilizes volume SET_CUR and GET_CUR to identify devices with sticky mixers. Unfortunately, even though most devices with sticky GET_CUR also have corresponding sticky SET_CUR, which I actually met more since the commit had been merged, there is also a rare case that some devices may have volume mixers that responds to SET_CUR properly but with its GET_CUR stubbed. This cause the sticky check to consider the mixer to be sticky and unnecessarily disable it. As the sticky check can't distinguish between sticky mixers and working SET_CUR but broken GET_CUR, add QUIRK_FLAG_MIXER_GET_CUR_BROKEN to tell that the device should fall into the second category when GET_CUR returns a constant value. In this case, the sticky check becomes non-fatal and only disables GET_CUR instead of the whole mixer. The current volume will then be provided by the internal cache that stores the last set volume. An info message prompting users to check MIXER_GET_CUR_BROKEN for potential sticky mixers is also added, so that users can learn how to do some experiments to determine what's going on. If the mixer surprisingly turns out to be non-sticky, they can submit a patch for a new quirk table entry. Signed-off-by: Rong Zhang Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260531-uac-quirk-get-cur-vol-v4-1-ede643dca151@rong.moe Stable-dep-of: c973e61895db ("ALSA: usb-audio: Add QUIRK_FLAG_MIXER_GET_CUR_BROKEN for Logitech PRO X 2 LIGHTSPEED") Signed-off-by: Sasha Levin commit 97e74d3e45d653c07c2d406fc530a9bbe3df8396 Author: Jose Fernandez (Anthropic) Date: Thu Jul 30 22:32:47 2026 +0000 bpf: tcp: Fix use-after-free in bpf_iter_tcp_established_batch() [ Upstream commit e5fd3f514e27db1f05fbd72ba615d74941e23c51 ] reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto the ehash chain, drops the bucket lock, and only afterwards sets rsk_refcnt to 3. Lockless readers such as __inet_lookup_established() handle this with refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain sock_hold() while holding the bucket lock, on the assumption that the lock guarantees sk_refcnt > 0. That assumption does not hold for request_sock: CPU 0 CPU 1 ----- ----- tcp_conn_request() reqsk_queue_hash_req() inet_ehash_insert(req) spin_lock(bucket) __sk_nulls_add_node_rcu(req) // rsk_refcnt == 0 spin_unlock(bucket) bpf_iter_tcp_established_batch() spin_lock(bucket) sock_hold(req) <-- addition on 0 spin_unlock(bucket) refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value which surfaces as: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1 Call Trace: bpf_iter_tcp_established_batch+0x14e/0x170 bpf_iter_tcp_batch+0x53/0x200 bpf_iter_tcp_seq_next+0x27/0x70 bpf_seq_read+0x107/0x410 vfs_read+0xb9/0x380 The iterator's stolen reference is lost when the publishing CPU's refcount_set() overwrites the count, leaving the socket one reference short. When the last legitimate owner drops its reference the reqsk is freed while still reachable, leading to use-after-free. This reproduces in seconds with tcp_syncookies=0, a handful of threads doing connect()/close() to a local listener while others read an iter/tcp link in a tight loop. Use refcount_inc_not_zero() and skip the socket on failure. A skipped socket is still part of the bucket, so keep counting it in expected. The reallocations are sized from expected, and a request sock whose refcount gets published while the lock is held across the last realloc must already have room. A skipped socket is counted in expected but never batched, so end_sk can be short of expected on a batch that is actually complete. Decide completeness by whether the walk left any socket behind instead. The WARN after the locked realloc checks the same, replacing an end_sk == expected check that could not hold on that path since commit cdec67a489d4 ("bpf: tcp: Make sure iter->batch always contains a full bucket snapshot"). If every matching socket in a bucket is mid-init (refcount 0), end_sk stays 0. Advance to the next bucket rather than returning a batch entry that was never filled this round. Fixes: 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock") Assisted-by: Claude:unspecified Signed-off-by: Jose Fernandez (Anthropic) Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/bpf/20260730-bpf-iter-tcp-refcnt-v3-1-754b9c8a6717@linux.dev Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Sasha Levin commit 99eb9bb12adbe52e966772c228d5434a0436588f Author: Babanpreet Singh Date: Tue Jul 14 04:29:10 2026 +0000 counter: microchip-tcb-capture: Fix DT channel validation [ Upstream commit f1a3a9946aab611dd2200c01ff122f64b033dad2 ] mchp_tc_probe() reads the devicetree "reg" cell - a u32, per the API contract of of_property_read_u32_index() - into a signed int, so the bounds check "channel > 2" fails to reject cell values at or above 0x80000000: reinterpreted as a negative int, they compare below 2 and pass validation. A malformed devicetree can therefore drive a negative channel into the ATMEL_TC_REG() offset arithmetic, making the driver access syscon regmap offsets outside the TC block's register window, and into the "t%d_clk" clock-name formatting, where it truncates clk_name (sized for "t0_clk".."t2_clk"). Declare channel as u32, matching the API contract; the unsigned comparison then rejects everything except channels 0..2. Adjust the format specifier to %u accordingly, which also resolves the W=1 warning that exposed the gap: microchip-tcb-capture.c:520:56: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=] note: directive argument in the range [-2147483648, 2] No behavior change for well-formed devicetrees: channels 0..2 take identical paths before and after. Fixes: 106b104137fd ("counter: Add microchip TCB capture counter") Assisted-by: Claude:claude-fable-5 [gcc W=1] Signed-off-by: Babanpreet Singh Reviewed-by: Joshua Crofts Link: https://lore.kernel.org/r/20260714042910.7-1-bbnpreetsingh@gmail.com Signed-off-by: William Breathitt Gray Signed-off-by: Sasha Levin commit e5e060eb63d10b41ab60fd955649479d99b38210 Author: Chengfeng Ye Date: Sat Aug 1 00:09:21 2026 +0800 bpf: Fix netns reference imbalance in conntrack kfuncs [ Upstream commit fdeba03fea78407a8c52faa99177c9f7f29f90eb ] The opts argument of the BPF conntrack kfuncs can point to a shared map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read opts->netns_id separately when acquiring and releasing the network namespace reference. The reference imbalance can occur as follows: CPU 0 CPU 1 read opts->netns_id (-1) skip get_net_ns_by_id() write opts->netns_id (id) read opts->netns_id (id) put_net(net) /* no matching get */ The reverse transition leaks the reference. Repeating the unmatched put can destroy a live namespace and crash later users. The kernel reported: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700 Call Trace: __sys_bpf+0x1662/0x50c0 __x64_sys_bpf+0x73/0xb0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Snapshot every input field of opts with READ_ONCE() before validating or using it. The netns_id snapshot keeps the namespace get/put pair balanced, while the other snapshots keep the remaining options from changing partway through an invocation. The individual reads can still observe an inconsistent combination during a concurrent update, but each selected field value remains stable for that invocation. Fixes: aed8ee7feb44 ("net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup") Fixes: d7e79c97c00c ("net: netfilter: Add kfuncs to allocate and insert CT") Signed-off-by: Chengfeng Ye Reviewed-by: Emil Tsalapatis Link: https://lore.kernel.org/bpf/20260731160921.3245840-1-nicoyip.dev@gmail.com Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Sasha Levin commit 13339132d89d00b513dff0730bff3a313b9b13b5 Author: Lizhi Hou Date: Fri Jul 31 11:59:55 2026 -0700 accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages() [ Upstream commit 4a19f7ab5972ef608b31ae921419bc3e04b3f8ad ] In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM object and then calls madvise(MADV_DONTNEED), the PTEs will be successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP). When userspace subsequently accesses the memory, drm_gem_shmem_fault() handles the page fault and attempts to map the backing shmem page via vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA now has VM_MIXEDMAP set, won't this predictably trigger the explicit assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn)) Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages() pre-population with the handle_mm_fault() loop that was already used for the import (dma-buf) path. Fixes: e486147c912f ("accel/amdxdna: Add BO import and export") Reviewed-by: Max Zhen Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260731185955.3449311-1-lizhi.hou@amd.com Signed-off-by: Sasha Levin commit 4aafa600d93e9551c1f24e785d57cbd4adf021d5 Author: Michael Guralnik Date: Wed Jul 29 11:04:02 2026 +0300 net/mlx5: fw_tracer, return NULL on create error [ Upstream commit af39eb111ce6b5eba9c08513b62c4868eb7e7fd5 ] Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- Fixes: fd1483fe1f9f ("net/mlx5: Add support for FW reporter dump") Signed-off-by: Michael Guralnik Reviewed-by: Shay Drori Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260729080402.2427184-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit eda60c85b4f4c7d66b7141a5fe020b1a7f395341 Author: Or Har-Toov Date: Wed Jul 29 11:06:00 2026 +0300 devlink: fix net namespace reference leak in reload [ Upstream commit 1c4dac9bf1d2ac31da63b794bdec697777cbd0fd ] devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net with a held reference. When the requested namespace differs from the current one and the reload action is not DRIVER_REINIT, the function returns -EOPNOTSUPP without releasing the reference. Add the missing put_net() on this error path. Fixes: 2edd92570441 ("devlink: don't allow to change net namespace for FW_ACTIVATE reload action") Signed-off-by: Or Har-Toov Reviewed-by: Jiri Pirko Signed-off-by: Tariq Toukan Reviewed-by: Antoine Tenart Link: https://patch.msgid.link/20260729080600.2427721-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 49053a39815f0f9eab954651e9a01031c2fc4033 Author: Jiawen Liu <1298662399@qq.com> Date: Tue Jul 28 12:17:10 2026 +0400 net: hisilicon: hix5hd2_gmac: remove redundant NAPI delete [ Upstream commit f307a7dc32097c11413178fca437a10d20890bc2 ] hix5hd2_dev_remove() calls netif_napi_del() before unregister_netdev(). This is not needed because free_netdev() deletes all NAPI instances attached to the net_device. Remove the redundant call and let the networking core tear down the NAPI instance during unregister_netdev(). The probe error path still keeps its explicit netif_napi_del(), because the device has not been registered there. Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Jiawen Liu <1298662399@qq.com> Link: https://patch.msgid.link/tencent_5FFD37A252B4FEA6A80AD25B17C8E904F005@qq.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ae9aff87025219005a2d16b4fe83d6f24643e50d Author: Jamal Hadi Salim Date: Wed Jul 29 05:44:11 2026 -0400 net/sched: cls_route: fix fastmap use-after-free on filter [ Upstream commit 47d7f7051253bdc02b1d245d87e38f16d31a74df ] The route4 classifier maintains a 16-slot fastmap cache that stores raw struct route4_filter pointers indexed by (id, iif). The reader (route4_classify) populates this cache via route4_set_fastmap() for every classified packet that hits a filter. The writer (route4_delete, route4_change) clears the cache via route4_reset_fastmap() before RCU-deferred kfree of the filter. This creates a UAF race: 1. Reader walks the RCU-protected bucket chain, finds filter f 2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work() 3. Reader calls route4_set_fastmap() and writes f into the cache *after* the writer's reset, caching a pointer about to be freed 4. After the RCU grace period, kfree(f) executes 5. Next classified packet on the same (id, iif) tuple hits the stale fastmap entry and reads f->res from freed memory Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a concurrent add/delete stress test (provided by both zdi and Santosh). Both triggered KASAN slab-use-after-free reports in the route4 fastmap paths. Fix: Introduce a per-filter boolean dying flag to suppress stale fastmap republishing by in-flight readers. Fixes: 1109c00547fc ("net: sched: RCU cls_route") Reported-by: zdi-disclosures@trendmicro.com Reported-by: Santosh Kalluri Suggested-by: Paolo Abeni Tested-by: Victor Nogueira Tested-by: Santosh Kalluri Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260729094411.46257-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bfc336a9fbbf09805f3dfe25c195a4db90af2846 Author: Mahanta Jambigi Date: Wed Jul 29 15:01:53 2026 +0200 net/smc: fix qentry overwrite for CONFIRM_LINK and ADD_LINK_CONT in smc_llc_event_handler() [ Upstream commit 976245094925bab9bc39366b2e9ab44ffcde61d0 ] The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in smc_llc_event_handler() stores an incoming qentry into the local LLC flow without first checking whether a qentry is already pending. If a malicious or buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the pointer without freeing the previous allocation, leaking one kmalloc-96 object per spurious message. The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a duplicate message when qentry is already occupied falls through to break and is freed by the kfree(qentry) at the out: label, rather than silently leaking the existing allocation. The response direction (smc_llc_rx_response()) is unaffected: it already guards with flow->qentry at the equivalent site and drops duplicate responses correctly. Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: Mahanta Jambigi Reviewed-by: Hidayath Khan Reviewed-by: Sidraya Jayagond Reviewed-by: Dust Li Link: https://patch.msgid.link/20260729130153.970800-1-mjambigi@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d90e72e5e0f900f9bda5f00cf0a35e67fef41e00 Author: Yiyang Chen Date: Wed Jul 29 15:18:29 2026 +0000 bpf: Propagate untrusted pointer state in commuted arithmetic [ Upstream commit cdf19b1b3c01791de074ce282089131026f52261 ] The untrusted PTR_TO_MEM early return skips pointer offset tracking because accesses go through probe-read handling. Moving it after full pointer-state propagation ensures scalar += untrusted_pointer leaves the destination as PTR_TO_MEM instead of an unrelated scalar. Fixes: f2362a57aeff ("bpf: allow void* cast using bpf_rdonly_cast()") Signed-off-by: Yiyang Chen Tested-by: Daniel Wade Link: https://patch.msgid.link/20260729-c3-035-public-bpf-v4-v4-3-8ee297e2346b@mails.tsinghua.edu.cn Signed-off-by: Eduard Zingerman Signed-off-by: Sasha Levin commit eaffa1495e4fe6330aeff9f323ea3d48b01f118a Author: Yiyang Chen Date: Wed Jul 29 15:18:28 2026 +0000 bpf: Preserve pointer state for commuted arithmetic [ Upstream commit a4c6f804b44c5c790269b25e0e61cf4e9f117c86 ] When scalar += pointer is handled in adjust_ptr_min_max_vals(), the destination register inherits the pointer state from the source pointer. Copying only selected fields is fragile because pointer provenance is tracked by several bpf_reg_state fields. Use the caller's temporary offset register to preserve the scalar operand while replacing the destination with the full pointer state. This preserves the frame number for PTR_TO_STACK registers and keeps parent identity fields consistent. Fixes: f4d7e40a5b71 ("bpf: introduce function calls (verification)") Signed-off-by: Yiyang Chen Tested-by: Daniel Wade Acked-by: Shung-Hsi Yu Link: https://patch.msgid.link/20260729-c3-035-public-bpf-v4-v4-2-8ee297e2346b@mails.tsinghua.edu.cn Signed-off-by: Eduard Zingerman Signed-off-by: Sasha Levin commit 1501e4d07c6fee0d50531a0d1cb2be01a63e6e75 Author: Lizhi Hou Date: Thu Jul 23 00:42:56 2026 -0700 accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages() [ Upstream commit 8d51e0fd3e698919d2adeff71936377f0c0d4aa0 ] Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma) before returning an error code to the caller. This is incorrect: amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo that registration. Calling vm_ops->close() manually — which drops the shmem pages_pin_count and the GEM object reference that backs the VMA — before the mmap syscall has even returned causes those resources to be released while the VMA is still alive. The kernel VMA teardown will call vm_ops->close() a second time when the process later unmaps the range, producing a reference count underflow. Replace both hard-error returns with a deferred-fault approach that keeps the VMA alive and retries page insertion through the HMM range-fault path. Fixes: e486147c912f ("accel/amdxdna: Add BO import and export") Reviewed-by: Max Zhen Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260723074256.2435143-1-lizhi.hou@amd.com Signed-off-by: Sasha Levin commit 0d26249671171ab759cb4fdce673554a690fa655 Author: Qu Wenruo Date: Fri Jul 31 10:14:49 2026 +0930 btrfs: initialize inode mapping flags for cached inodes [ Upstream commit 0ef349734a93227b45f65fc50a3311d1cc5f03e9 ] [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. Assisted-by: LLM (analysis) Fixes: ecde48a1a6b3 ("btrfs: expose per-inode stable writes flag") Fixes: cc38d178ff33 ("btrfs: enable large data folio support under CONFIG_BTRFS_EXPERIMENTAL") Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 60b50ceba6243802f8d2c0a9a7c2d549a93b1d64 Author: Dmitry Antipov Date: Mon Jul 27 14:53:52 2026 +0300 btrfs: fix memory leak in btrfs_do_encoded_write() [ Upstream commit d2a4e4e626b2f4670b69b430c357f03f53eb6632 ] Local fuzzing of 6.12.94 has found the following memory leak: Unreferenced object 0xffff888018050a80 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................ backtrace (crc a8a6fc29): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline] qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Unreferenced object 0xffff888018050a00 (size 64): comm "syz.0.17", pid 10297, jiffies 4294953601 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................ 90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................ backtrace (crc cb5c9580): kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] slab_post_alloc_hook mm/slub.c:4152 [inline] slab_alloc_node mm/slub.c:4197 [inline] __kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358 kmalloc_noprof include/linux/slab.h:878 [inline] kzalloc_noprof include/linux/slab.h:1014 [inline] ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114 extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline] __set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086 set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821 qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312 btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355 btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746 btrfs_encoded_write fs/btrfs/file.c:1482 [inline] btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507 btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738 btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:47 [inline] do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by freeing an extent changeset before returning from btrfs_do_encoded_write(). Fixes: 7c0c7269f7b5 ("btrfs: add BTRFS_IOC_ENCODED_WRITE") Reviewed-by: Filipe Manana Signed-off-by: Dmitry Antipov Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit fc50b475ad27f50b4dcc98fc4c44e8802bc1b248 Author: David Lee Date: Wed Jul 15 09:05:14 2026 +0000 btrfs: lzo: reject inline extents without valid headers [ Upstream commit 0fa78ef637deb5dbe341582f88553a4bce496de0 ] [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. Fixes: a6fa6fae40ec ("btrfs: Add lzo compression support") Assisted-by: Codex:gpt-5.5 Signed-off-by: David Lee [ Rework the commit message to remove slop ] Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit ffa355d5dff35292c0deee2817e1aa6d8f994e5f Author: Qu Wenruo Date: Mon Jun 8 08:23:49 2026 +0930 btrfs: lzo: add error message for invalid headers [ Upstream commit 1cb15b153c636096740519f62040ec6dc3e50aef ] Inside btrfs we always pair -EUCLEAN error with an error message to indicate which data is corrupted. However there are 3 cases inside lzo decompression where there is no error message for corrupted headers. Add those missing error messages to show exactly where the corruption is. Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Stable-dep-of: 0fa78ef637de ("btrfs: lzo: reject inline extents without valid headers") Signed-off-by: Sasha Levin commit ba3e2d9584a4134e900140ccf45a9589ab084883 Author: Matti Vaittinen Date: Fri Jul 31 12:36:28 2026 +0300 watchdog: bd96801_wdt: Fix timeout for enabled WDG [ Upstream commit 1246aa2b6ccc8944676bd24ff3e37cc56b93b51b ] When watchdog is enabled at the probe time, the bd96801 driver retrieves the timeout configuration from the registers to set-up the heart-beat values. As Sashiko pointed out at https://lore.kernel.org/all/20260722085819.495211F000E9@smtp.kernel.org/ the timeout values are incorrectly computed in driver, resulting wrong heartbeat. This leads to devere problems if watchdog was enabled at probe time. According to the data-sheet, the "too fast" ping limit is configured as multiple of FASTNG_MIN. Furthermore, the "too slow" ping limit is configured as multiples of "too fast" timeout. The FASTNG_MIN is set to 11, meaning 1.1 mS and "too fast" and "too slow" limits are computed from this. Hence, converting the limits to mS should be done by dividing by 10, not by dividing by USEC_PER_MSEC. Fix this by dividing the timeout values with correct scaling factor. While at it, fix whitespace problem (double empty line). Signed-off-by: Matti Vaittinen Fixes: 09dad69757b6 ("watchdog: ROHM BD96801 PMIC WDG driver") Link: https://lore.kernel.org/r/amxskHmQbi9v-8_l@mva-rohm [groeck: Added reference to whitespace change to description] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 369faf64ccbc2b4b53f44897c19e9bf3fc464385 Author: Julian Anastasov Date: Thu Jul 30 21:35:06 2026 +0300 ipvs: return the csum validation for forward hook [ Upstream commit 99609cb0aa789c8d071050ce8579989551882cc6 ] Sashiko notes that playing games with the skb dst and rt flags instead of providing hooknum is not a good idea when validating the checksums. Also, skipping checksum validation for FORWARD packets risk silent data corruption, even if the only user is the FTP-CMD packets coming from the real server. Sashiko also noticed that by using common checksum helper in the previous commit we actually fixed old bug where the TCP/UDP checksum for IPv6 on CHECKSUM_COMPLETE was not validated correctly. Fixes: e876b75b9020 ("ipvs: fix the checksum validations") Link: https://sashiko.dev/#/patchset/20260722211420.153933-1-pablo%40netfilter.org Link: https://sashiko.dev/#/patchset/20260727185024.67534-1-ja%40ssi.bg Link: https://sashiko.dev/#/patchset/20260728202520.59179-1-ja%40ssi.bg Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 243d0187ec4c3837b9b0004f18d1068e46115760 Author: Julian Anastasov Date: Thu Jul 30 21:35:05 2026 +0300 ipvs: avoid out-of-bounds write in ip_vs_nat_icmp [ Upstream commit 646922a0379496154e8c8faca4f8e2fd9100cacc ] Sashiko warns that local attacker can modify the packet while it is processed by IPVS. Some places read the IP ihl field multiple times which can cause out-of-bounds access. One such place is ip_vs_nat_icmp where we can write after the validated area. Fix it by providing ciph argument just like it is done for IPv6 and use ciph->len as offset to the embedded transport header. Modify some IPv4 header checks by reading the ihl field only once. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://sashiko.dev/#/patchset/20260722101517.36313-1-ja%40ssi.bg Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 3d450788dc04961317adcce16f0ff7be4c428a18 Author: Jozsef Kadlecsik Date: Thu Jul 30 20:38:50 2026 +0200 netfilter: ipset: switch ext_size to atomic64_t [ Upstream commit 712a6f545c359b427daa9a5a782e30d2f8331e25 ] The hash types do not acquire set->lock, they use 'region locking' where only part of the hash table is locked. Parallel inserts and deletes are possible and CPUs can race on ->ext_size update. Switch to atomic64_t. This leaves another bug unresolved: there still can be a race on comment extension re-init. This will be handled in a later commit when converting to rhashtable backend. Fixes: f66ee0410b1c ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports") Signed-off-by: Jozsef Kadlecsik Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 14328d1ecdda2d051effbef611654be47b882f17 Author: Nikhil P. Rao Date: Mon Jul 27 17:00:30 2026 +0000 pds_core: cancel pending PCI reset work on AER recovery [ Upstream commit 57d635329d799b79096155cdf47ee0013d6780d1 ] pdsc_check_pci_health() queues pci_reset_work when it sees a broken PCI connection, and nothing cancels it. When the PCI core starts AER recovery, pdsc_pci_error_detected() runs pdsc_reset_prepare() and recovers the device, but a pci_reset_work queued just before is left pending. If it runs after recovery released the device lock, it resets a device the driver now considers healthy, bouncing the link for no reason. Cancel pci_reset_work in pdsc_pci_error_detected() after pdsc_reset_prepare(), which has already stopped the health thread so it cannot requeue the work. cancel_work_sync() is safe under the device lock here because pdsc_pci_reset_thread() uses pci_try_reset_function(), which returns instead of blocking on the lock. Only PFs initialize pci_reset_work, so guard the cancel with !is_virtfn. Fixes: 81665adf25d2 ("pds_core: Fix pdsc_check_pci_health function to use work thread") Reported-by: sashiko-bot Closes: https://sashiko.dev/#/patchset/20260714180223.1642792-2-nikhil.rao%40amd.com?part=1 Signed-off-by: Nikhil P. Rao Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20260727170030.361116-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8530ea7ac96c315fb9e84778e8569e3953acc169 Author: Nikhil P. Rao Date: Mon Jul 27 16:45:48 2026 +0000 pds_core: keep the health thread stopped during reset [ Upstream commit cd09971dcc1c499ae0879010a00e9dba87abdc4f ] Commit d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") stops the health thread with cancel_work_sync() before a reset, but a devcmd timeout during pdsc_fw_down() re-queues health_work, so pdsc_health_thread() runs again mid-reset and double allocates the core DMA queues via pdsc_fw_up(). Only the reset path is affected: on remove PDSC_S_STOPPING_DRIVER gates the health thread and the workqueue is destroyed. Use disable_work_sync() to cancel health_work and block further queue_work() on it, and enable_work() in pdsc_restart_health_thread() to re-allow it after the reset. disable_work_sync() keeps a disable depth, so every disable must be matched by one enable. pdsc_reset_prepare() stops the health thread and pdsc_reset_done() restarts it. On the AER path pdsc_pci_error_detected() calls pdsc_reset_prepare(), then pdsc_pci_error_resume() re-inits via pci_reset_function_locked() (pds_core has no .slot_reset handler), which runs the pair again - stopping the thread twice but restarting it once. Gate the disable and enable on a health_stopped flag so each fires at most once per stopped/running transition. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reported-by: sashiko-bot Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2 Signed-off-by: Nikhil P. Rao Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20260727164548.359562-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7165fe321c61ec138850c02f030f274797761f5f Author: Shay Drory Date: Tue Jul 28 07:43:38 2026 +0300 net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock [ Upstream commit 6ddfba2ea98db21b001e0e5c472499156224650c ] In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: 04de7dda7394 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows") Signed-off-by: Shay Drory Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260728044338.2271143-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4f3464fc6c1f26afc504fd525c574f2bc14c9d42 Author: Satish Kharat Date: Mon Jul 27 23:26:30 2026 -0700 enic: fix tx_hang_reset use-after-free on device removal [ Upstream commit ec680ea4ba1bca92a767fb7e7869758bfdd886e3 ] enic_remove() cancels the reset and change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-schedule these work items in the window between the cancel and unregister_netdev(). Use disable_work_sync(), which cancels the work and blocks any subsequent schedule_work() from requeuing it, and apply it to the reset and change_mtu_work items as well so the same requeue race is closed for all teardown work. Fixes: 937317c7c109 ("enic: do hang reset only in case of tx timeout") Signed-off-by: Satish Kharat Link: https://patch.msgid.link/20260728062730.2394873-1-satishkh@cisco.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 257c4a3a34d8f51efb00f35375a0c6ce3c8f6ce2 Author: Xiang Mei (Microsoft) Date: Sat Jul 25 23:39:30 2026 +0000 bonding: alb: re-check primary_is_promisc under RTNL in bond_alb_monitor [ Upstream commit 683c6ba6e58e6ed1037831ea97dd58d9c0e76b8d ] bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the active slave. In that window the active slave can change under RTNL (RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()), which already drops the promiscuity and clears primary_is_promisc. The monitor still acts on the stale decision: if the slave was removed with no failover, curr_active_slave is now NULL and the deref faults; if it failed over, the stale dev_set_promiscuity(-1) underflows the new slave's promiscuity counter and pins it in IFF_PROMISC. Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: b42 bond_alb_monitor RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Kernel panic - not syncing: Fatal exception Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so the monitor only undoes an increment it still owns. The other bonding monitors already re-read state under RTNL in their commit phase (bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only one acting on the pre-trylock decision. Fixes: d0e81b7e2246 ("bonding: Acquire correct locks in alb for promisc change") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) Reviewed-by: Nikolay Aleksandrov Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20260725233930.2957317-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e18f8d166a7c8faf2d9d045903f064dda511bd85 Author: Fan Ye Date: Mon Jul 27 12:29:48 2026 +0000 Revert "net: thunderbolt: Enable end-to-end flow control also in transmit" [ Upstream commit 1881f2efbf7f78dc0a79a387b29fde6ff56d3731 ] This reverts commit a8065af3346ebd7c76ebc113451fb3ba94cf7769. Per the USB4 spec, a Transmit Descriptor Ring with E2E flow control disabled does not require any credits to be available before the Host Interface Adapter Layer transmits a tunneled packet from it. Once E2E is enabled on that ring the controller must first obtain end-to-end credits. The ASMedia ASM4242 USB4 host router (PCI 1b21:2425) never delivers those credits. The controller does accept the configuration: reading the ring OPTIONS register back right after tb_ring_start() returns exactly what was written, including RING_FLAG_E2E_FLOW_CONTROL (bit 28) and the E2E HopID field. No credit ever arrives though, so the Tx ring's hardware consumer index never advances and the link carries no traffic at all. Measured on two hosts connected point to point, onboard ASM4242 on MSI X870E and X870, v6.17, stock drivers/net/thunderbolt/main.c with only this revert applied on top: before: 100% packet loss to the peer; thunderbolt0 is up and the XDomain handshake completes ("new host found"), but iperf3 fails with "No route to host" once the neighbour entry expires after: 0% packet loss, 0.28 ms RTT; iperf3 4.21 Gb/s one way and 5.17 Gb/s the other (5 runs each, stddev <= 0.02), 1 retransmit in 10 s An instrumented build additionally showed a frozen-Tx-consumer watchdog firing ~30k times in a 10 s window before this change. Rx-side E2E is not touched by this revert, so peers that do return credits keep receive-side flow control. ASMedia does not look like an isolated case. The out-of-tree thunderbolt-ibverbs project disables native E2E on AMD NHI by default, noting that "Strix Halo has reproduced TX completion wedges with multiple native E2E rings active" -- the same failure mode, on a different vendor. Since the driver has no way to tell in advance which host router returns the credits, going back to the previous behaviour looks safer than adding a quirk per affected part; Tx-side E2E can be reintroduced as an opt-in for controllers that are known to implement the credit return. Note that the reverted commit was not fixing a reported problem, it was derived from the spec wording alone, so this revert is not expected to regress a known workload. Cc'ing the original author in case there was one. Fixes: a8065af3346e ("net: thunderbolt: Enable end-to-end flow control also in transmit") Cc: zhangjianrong Signed-off-by: Fan Ye Acked-by: Mika Westerberg Link: https://patch.msgid.link/20260727123002.25225-1-fy15309206903@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fe450066628ea4ab748bbe23116f7c1291f6f71e Author: Jijie Shao Date: Fri Jul 24 17:30:36 2026 +0800 net: hns3: fix speed configuration residue after driver reload [ Upstream commit 3860d8748af315bfee6fe669fddc1fc17d3214db ] After setting a 100G optical port to 40G via ethtool and reloading the driver, the port remains at 40G instead of reverting to the firmware default speed of 100G. The commit referenced in Fixes: added two overwrites in hclge_init_ae_dev() for non-copper media, so that optical ports connected to forced-mode remotes inherit the firmware-preset autoneg and speed instead of the hardcoded defaults: req_autoneg = mac.autoneg req_speed = mac.speed (when autoneg disabled) The autoneg overwrite keeps existing behavior: hclge_set_autoneg_speed_dup() already uses mac.autoneg (not req_autoneg) since it was introduced, so autoneg inheritance from firmware was already in place. This part is kept. The speed overwrite, however, introduces the residue: mac.speed reflects whatever was last programmed into the MAC, and after unload firmware does not restore the MAC speed to the flash default. So if the user changed speed via ethtool in a prior load, mac.speed still carries that value on reload and req_speed inherits it. Fix by dropping the req_speed overwrite only. req_speed keeps the firmware default value set in hclge_configure() (cfg.default_speed), so a reload reverts the speed to default, matching the expectation that a driver reload resets link configuration. Trade-off: on optical ports whose firmware default speed does not match a forced-mode remote, reload now drops the link and the user must re-apply ethtool configuration. This is acceptable: a driver reload is expected to reset link configuration, not to inherit runtime state from before unload. The autoneg inheritance is left in place as established behavior; changing it is out of scope for this patch and would itself be a user-perceivable behavior change. Fixes: d9d349c4e8a0 ("net: hns3: differentiate autoneg default values between copper and fiber") Signed-off-by: Jijie Shao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260724093036.426631-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a272a3d3129dca5c77cfa66cbfe6bc01ba183395 Author: Pengpeng Hou Date: Thu Jul 23 10:38:06 2026 +0800 drm/bridge: ps8640: propagate AUX transfer register errors [ Upstream commit 20697ecb299cd77b4cf8b28f655e56606b0472d8 ] ps8640_aux_transfer_msg() programs the AUX address registers, starts the AUX transfer, waits for SWAUX_SEND to clear, and reads the AUX status register. Several of those regmap operations have return values, but the function only checks a stale ret after the status read. Propagate failures from the address write, transfer start, completion poll, and status read. This avoids returning a transfer length when the bridge register transaction or AUX completion wait failed. Fixes: 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel") Signed-off-by: Pengpeng Hou Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20260723103509.2-ps8640-v2-pengpeng@iscas.ac.cn Signed-off-by: Sasha Levin commit e71780593647b350ea9d57f914177d88eb502743 Author: Qingfang Deng Date: Fri Jul 24 09:49:26 2026 +0800 ovpn: fix incorrect use of rcu_access_pointer() [ Upstream commit 26ba17d845193dac4921ae1ab280d28d1938052e ] rcu_access_pointer() should only be used to test the value of a pointer, not to dereference it. As it's in a spin_lock_bh() critical section, use rcu_dereference_bh() instead, avoiding an extra rcu_read_lock(). Fixes: f6226ae7a0cd ("ovpn: introduce the ovpn_socket object") Signed-off-by: Qingfang Deng Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit af82e137551342fba523868b85ca472c97bb4578 Author: Antonio Quartulli Date: Tue Jul 28 13:48:54 2026 +0200 ovpn: ensure TCP vars are initialized first [ Upstream commit 4680c0ebd958fc18e53c8b91d80436b236a8fc09 ] Netlink calls may access TCP global vars (i.e. when attaching a TCP socket), therefore we need to make sure the latters are initialized beforehand. For this reason move the global TCP initialization at the top of the module init function. Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit ac5cce2e955713db8d9a9205ff1e81bcb046f3f8 Author: Antonio Quartulli Date: Tue Jul 28 13:48:53 2026 +0200 ovpn: disable IPv4 redirects on MP interfaces [ Upstream commit 0301aa324941698bec3dd455df1c5abc7afb10db ] ovpn_mp_alloc() tried to disable SEND_REDIRECTS on a multipeer interface, but it runs from ovpn_net_init() (->ndo_init), which register_netdevice() invokes before the NETDEV_REGISTER notifier chain. The IPv4 in_device is only created when that notifier reaches inetdev_event() -> inetdev_init(), so __in_dev_get_rtnl() always returned NULL at ndo_init time and the whole redirect-disabling block (both the per-device and the per-netns IPV4_DEVCONF_ALL write) was dead. MP interfaces therefore kept emitting ICMP redirects. Disabling redirects only once is not enough either: the IPv4 in_device is destroyed and recreated when the interface is moved to a different network namespace (NETDEV_UNREGISTER/NETDEV_REGISTER), and the newly created in_device inherits the destination namespace defaults, silently re-enabling SEND_REDIRECTS. Disable redirects from ovpn_net_open() (->ndo_open) instead: it runs every time the interface is brought up, including after the in_device has been recreated, so the setting is always re-applied. This mirrors what wireguard does in wg_open(). RTNL is held on the ndo_open() path, so __in_dev_get_rtnl() is safe. Fixes: 05003b408c20 ("ovpn: implement multi-peer support") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 844616a78baa3f27b0a0f17f44e8ed5788453606 Author: Antonio Quartulli Date: Tue Jul 28 13:48:52 2026 +0200 ovpn: hash floated peer by transport identity only [ Upstream commit b47a52dcd598a50207a33df304acdf45348a690f ] The by_transp_addr table is keyed on the peer's remote transport address, but the float rehash hashed bind->remote directly, while the two other sites that touch the table build a clean key first: ovpn_peer_add_mp() and the lookup in ovpn_peer_get_by_transp_addr() both hash a sockaddr holding only family/address/port. For a link-local IPv6 peer, bind->remote carries sin6_scope_id (set from ipv6_iface_scope_id() when the endpoint is learned), and that field is folded into the jhash() over sizeof(struct sockaddr_in6). The lookup never sets sin6_scope_id, so after such a peer floats it is rehashed into a scope_id-dependent bucket that lookups (scope_id 0) never visit, making the peer unreachable through the by_transp_addr fallback. ovpn_peer_transp_match() only compares address and port, so the hash was keying on a field the match ignores. sin6_scope_id must stay in bind->remote because the TX path uses it as flowi6_oif, so it cannot just be cleared there. Instead build the hash key from family/address/port only, exactly like ovpn_peer_add_mp() and the lookup, so all three sites agree on the bucket. Fixes: f0281c1d3732 ("ovpn: add support for updating local or remote UDP endpoint") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 21a2eda3fcc63dc54d9e72fca9b9218be2347cb1 Author: Antonio Quartulli Date: Tue Jul 28 13:48:51 2026 +0200 ovpn: zero-initialize sockaddr before learning a floated endpoint [ Upstream commit 3f012bdbabe211ccbc0c50ea5a1dbc60f8af1532 ] ovpn_peer_endpoints_update() builds the new remote endpoint in an on-stack struct sockaddr_storage that is left uninitialized. For IPv4 only sin_family/sin_addr/sin_port are written, leaving the 8-byte sin_zero padding as stack garbage (for IPv6, sin6_flowinfo is left uninitialized likewise). ovpn_peer_reset_sockaddr() -> ovpn_bind_from_sockaddr() then memcpy()s sizeof(struct sockaddr_in)/sizeof(struct sockaddr_in6) bytes - padding included - into bind->remote. That buffer is later hashed with jhash() over the same length to place the peer in the by_transp_addr table, so the garbage padding lands the floated peer in an essentially random bucket. Lockless lookups in ovpn_peer_get_by_transp_addr() build their key from a zero-initialized sockaddr_storage, compute a different bucket and fail to find the peer. This is also a plain use of uninitialized stack memory in jhash(). Build the floated endpoint with a designated initializer so the padding (sin_zero for IPv4, sin6_flowinfo for IPv6) is zeroed as part of the assignment. This keeps the padding out of the by_transp_addr hash key without memset-ing the whole sockaddr_storage on every received packet. Fixes: f0281c1d3732 ("ovpn: add support for updating local or remote UDP endpoint") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 43a31142e1d22b3cf5490bd94a94db7196901734 Author: Antonio Quartulli Date: Tue Jul 28 13:48:50 2026 +0200 ovpn: ensure socket is owned by ovpn before deref sk_user_data [ Upstream commit 59aed1eb60d70678a53acccb0cb337a26ce6680e ] Some subsystems, like BPF SOCKMAP, set sk_user_data without actually setting the encap_type. For this reason, we must make sure that the type is the one ovpn expects before dereferencing sk_user_data. Failing to do so may lead to out-of-bounds reads. Fixes: f6226ae7a0cd ("ovpn: introduce the ovpn_socket object") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 4bc1c83a2e04f044e8d9b0aca1622f28c7208a72 Author: Antonio Quartulli Date: Tue Jul 28 13:48:48 2026 +0200 ovpn: rehash peer in by_transp_addr table on CMD_PEER_SET [ Upstream commit cc12f7240c8c4dee557749d33237542613992f14 ] When userspace updates a peer's remote endpoint via OVPN_CMD_PEER_SET, ovpn_nl_peer_modify() installs a new ovpn_bind through ovpn_peer_reset_sockaddr(), but ovpn_nl_peer_set_doit() only calls ovpn_peer_hash_vpn_ip() to refresh the VPN-IP hashtables. The peer is left in the bucket of peers->by_transp_addr corresponding to its old remote address. As a consequence, datagrams arriving at the UDP RX path from the newly configured remote hash to a different slot and the lockless lookup in ovpn_peer_get_by_transp_addr() (called from ovpn_udp_encap_recv()) does not find the peer, until either a float event or a peer re-add fixes the bucket. Introduce ovpn_peer_hash_transp_addr() (modeled after ovpn_peer_hash_vpn_ip()) and invoke it from ovpn_nl_peer_set_doit() whenever the request carried a new remote address. The helper bails out in P2P mode and on peers without a bind (TCP), and relies on hlist_nulls_del_init_rcu()'s pprev==NULL short-circuit to handle the case of an entry not currently linked in the table. Fixes: 1d36a36f6d53 ("ovpn: implement peer add/get/dump/delete via netlink") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 66745480298775f188b2f5ad266643e85a90f73b Author: Antonio Quartulli Date: Tue Jul 28 13:48:47 2026 +0200 ovpn: skip rehash for peers already removed from by_id [ Upstream commit 33ec10567fe14456063daf549fdf1a4f53448e4c ] ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip(). Fixes: 1d36a36f6d53 ("ovpn: implement peer add/get/dump/delete via netlink") Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit 8730ac05b2c5b1965a0e60c05706ae7f86235d5e Author: Rosen Penev Date: Sat Jul 25 14:57:22 2026 -0700 ARM: dts: BCM5301X: fix PCIe controller 2 second interrupt [ Upstream commit bab4d538f8485e0d48538fcb82b285df3779278e ] PCIe controller 2 has interrupts 0-4 mapping to GIC SPI 138-142. The mapping for interrupt 1 was incorrectly set to 138 due to a copy-paste error. Fix it to 139. Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Link: https://lore.kernel.org/r/20260725215722.9323-1-rosenp@gmail.com Fixes: 3b3e35b279be ("ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL 2.0+ / MIT") Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit 147ebe15f9556ad3326f7ab74a054ae116a6003a Author: Ralf Lici Date: Wed Jul 29 15:41:30 2026 +0200 ovpn: add missing rtnl_link_ops->get_size callback [ Upstream commit 6e9f539e4f01153651dd77609b5ccadd44b74df8 ] ovpn_fill_info emits IFLA_OVPN_MODE inside IFLA_INFO_DATA, but ovpn_link_ops does not provide a get_size callback. Consequently, rtnetlink's size estimate for ovpn link messages does not include the nested mode attribute. Available skb tailroom may hide this mismatch. When the remaining space is insufficient, however, ovpn_fill_info returns -EMSGSIZE and message construction fails. Add the callback and account for IFLA_OVPN_MODE. Fixes: c2d950c4672a ("ovpn: add basic interface creation/destruction/management routines") Signed-off-by: Ralf Lici Signed-off-by: Antonio Quartulli Signed-off-by: Sasha Levin commit f5d2914f93c2ef9842bc9ad05109ec6bd723717c Author: Hans Ulli Kroll Date: Sun Jul 19 15:36:00 2026 +0200 pinctrl: qcom: ipq806x: mark pci reset as a GPIO pin function [ Upstream commit fd46760956509f580f7d3d25db4de10e7c6f949b ] The qcom pinctrl core supports marking functions that represent GPIO mode via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject GPIO requests for pins that are muxed to the GPIO function. Mark PCIe reset as GPIO pin function This allows ipq806x to keep the PCIe-reset related configuration in DTS without tripping over strict pinmux ownership checks. Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict") Signed-off-by: Hans Ulli Kroll Acked-by: Linus Walleij Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20260719134548.8830-3-linux@ulli-kroll.de Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 617724534a835e4b09a2b70bf567db835ef84c9f Author: Hans Ulli Kroll Date: Sun Jul 19 15:35:59 2026 +0200 pinctrl: qcom: ipq806x: mark gpio as a GPIO pin function [ Upstream commit 687f39faccba29ab26de965411db37e849af8ec2 ] The qcom pinctrl core supports marking functions that represent GPIO mode via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject GPIO requests for pins that are muxed to the GPIO function. Add a IPQ_GPIO_PIN_FUNCTION() helper and use it for the ipq806x gpio function, matching how the msm-based qcom drivers handle this. This allows ipq806x to keep the GPIO-related configuration in DTS without tripping over strict pinmux ownership checks. Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict") Signed-off-by: Hans Ulli Kroll Acked-by: Linus Walleij Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260719134548.8830-2-linux@ulli-kroll.de Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 576b1c202fa096325fdae9bfea46fadd7cad84e4 Author: Kuba Piecuch Date: Thu Jul 23 09:59:55 2026 +0000 selftests/sched_ext: Handle sleeping task affinity changes in numa test [ Upstream commit d4a00d61a5c2c24973175ace5368d1f6acf9bb0a ] When a sleeping task's affinity is changed, task_cpu(p) can be outside of p->cpus_ptr until after select_task_rq() selects a new runqueue for the task during wakeup. Thus, the task's NUMA node determined by numa_select_cpu() can be completely outside of the task's cpumask, leading to scx_pick_{idle,any}_cpu_node() failing to find an eligible CPU and returning -EBUSY. This leads to the numa.bpf.c scheduler abnormally exiting with the following message in dmesg: sched_ext: numa: invalid CPU -16 scx_bpf_cpu_node+0x120/0x190 bpf_prog_0a34b8e0f515771f_numa_select_cpu+0x108/0x14e bpf__sched_ext_ops_select_cpu+0x4f/0xb4 select_task_rq_scx+0xb0/0x210 select_task_rq+0xa0/0xd0 __try_to_wake_up+0x196/0x650 complete_all+0x76/0x100 migration_cpu_stop+0x22b/0x300 cpu_stopper_thread+0xc1/0x180 smpboot_thread_fn+0x16b/0x230 kthread+0x2d7/0x350 ret_from_fork+0x1c2/0x350 ret_from_fork_asm+0x1a/0x30 Make numa_select_cpu() robust against this case by returning @prev_cpu if no CPU could be found in the selected NUMA node _and_ we have reason to believe that the task's affinity was changed while it was sleeping. Fixes: 5ae5161820e5 ("selftests/sched_ext: Add NUMA-aware scheduler test") Signed-off-by: Kuba Piecuch Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 5edc5e1df6c08621028a7608330e635f4933b414 Author: Yuho Choi Date: Sun May 24 23:38:46 2026 -0400 ARM: npcm: Fix OF node refcount leaks in SMP setup [ Upstream commit 8eb052f48331474c2789d07b7f11165c323bd2f9 ] npcm7xx_smp_boot_secondary() and npcm7xx_smp_prepare_cpus() look up the GCR and SCU nodes with of_find_compatible_node(). The returned nodes are used for of_iomap(), but the node references are never released. of_iomap() does not consume the device node reference, and iounmap() only releases the MMIO mapping. Drop each node reference after the corresponding mapping attempt. Fixes: 7bffa14c9aed ("arm: npcm: add basic support for Nuvoton BMCs") Signed-off-by: Yuho Choi Reviewed-by: Avi Fishman Signed-off-by: Andrew Jeffery Signed-off-by: Sasha Levin commit 3aa0c1d23ee1b9d9b340fb2f4736536e1408d706 Author: Yun Zhou Date: Sun Jul 19 23:11:24 2026 +0800 xfs: handle NULL b_addr in xfs_buf_free [ Upstream commit d852729c5f4f830fbe7413df032e29459b3daf83 ] When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with bp->b_addr still NULL. The code falls through to the folio_put path which calls virt_to_folio(NULL), dereferencing an invalid address and causing a kernel crash. Call Trace: xfs_buf_free+0x25f/0x510 xfs_buf_alloc+0xc98/0x19b0 xfs_buf_find_insert+0x55/0x14d0 xfs_buf_get_map+0x122b/0x17c0 xfbtree_init_leaf_block+0x11c/0x4a0 xfbtree_init+0x1bb/0x460 xrep_rmap_setup_scan+0x100/0x1f0 xrep_rmapbt+0x41/0xc0 Fix this by skipping folio_put() when bp->b_addr is NULL. Fixes: 5076a6040ca1 ("xfs: support in-memory buffer cache targets") Reported-by: syzbot+94c22d92f72f5a235b7d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=94c22d92f72f5a235b7d Signed-off-by: Yun Zhou Reviewed-by: Christoph Hellwig Signed-off-by: Carlos Maiolino Signed-off-by: Sasha Levin commit 131ab677b03349a5ae48da8722ec7075b37ec66e Author: Karthikeyan KS Date: Fri Jun 12 19:07:43 2026 +0000 soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read [ Upstream commit 1acef6d85bfd98bd9dfe1f08bffa397a4dda8a6f ] put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Karthikeyan KS Signed-off-by: Andrew Jeffery Signed-off-by: Sasha Levin commit d2c8160da4e506befb8a506693b861634f478285 Author: Daniel Drake Date: Thu Jul 16 21:45:27 2026 +0100 arm64: dts: broadcom: bcm2712: Remove non-functional EL2 virtual timer [ Upstream commit 75952cfc7752c52a2b692b59d34ce160d3edabb2 ] Commit d87773de9efe1 ("clocksource/drivers/arm_arch_timer: Default to EL2 virtual timer when running VHE") causes boot to hang on Raspberry Pi 5. The newly-selected EL2 virtual timer does not generate any interrupts, even though the GIC_DIST_ENABLE_SET flag has been confirmed set via readback. It is highly unusual that this timer interrupt is non-operational because this is a standard GIC interrupt corresponding to a standard Cortex-A76 CPU timer. However, Broadcom have confirmed for this SoC: > the interrupt line was never connected in the first place as this was > not identified as being a requirement Remove the corresponding DeviceTree entry. Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/ea15cce1-b393-43f6-8d58-3d6f90f0c0cd@samsung.com/ Fixes: faa3381267d0 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5") Signed-off-by: Daniel Drake Link: https://lore.kernel.org/r/20260716-bcm2712-el2-v2-1-e708f7fb42fa@reactivated.net Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit b77bd3f067a0ce2ce753ae04ec2ab748733219b6 Author: Anna Schumaker Date: Tue Jun 30 15:39:45 2026 -0400 NFS: Decrement refcounts if allocating nfs_free_stateid_data fails [ Upstream commit 4aeb63d5ac2dba2a474e7b64d60776d9dd1c6cd2 ] I noticed that we were immediately exiting this function if the allocation fails, leaving the client and server object refcounts bumped. Fix this by creating a common exit point to clean up dangling references. Fixes: 576acc259146 ("nfs4: take a reference on the nfs_client when running FREE_STATEID") Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 80ed3d762628b36c9e4b22fac7c65b72ef3b13dd Author: Anna Schumaker Date: Tue Jun 30 14:31:00 2026 -0400 NFS: Pin the 'struct nfs_server' during a FREE_STATEID call [ Upstream commit cf616096a0f3a2b60f7d68b6b39674a6867ded9c ] Dan Aloni reports that he was able to hit a use-after-free bug if a FREE_STATEID operation gets delayed for whatever reason. Fix this by bumping the refcount of the 'struct nfs_server' object for the duration of the FREE_STATEID so it doesn't get cleaned up from underneath us while operations are still in flight. Reported-by: Dan Aloni Fixes: 7c1d5fae4a87 ("NFSv4: Convert nfs41_free_stateid to use an asynchronous RPC call") Tested-by: Dan Aloni Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 517b1e4fe28bcbab2113c00bbfa5475dda86fc8a Author: Tejun Heo Date: Thu Jul 16 10:46:04 2026 -1000 sched_ext: Don't enable non-ext tasks in the sub-sched task loops [ Upstream commit 5cdc928598095b2c7d5f265e5f21eadd1634bfbe ] Root enable and scx_post_fork() enable a task only if it's on the ext class. Tasks on other classes, possible under an SCX_OPS_SWITCH_PARTIAL root, are left READY and enabled by switching_to_scx() when they switch over. The sub enable-commit pass and the sub-disable re-home loop enable unconditionally, so a fair-class READY task in the subtree becomes ENABLED while not on sched_ext. A later switch to SCHED_EXT then trips the task state validation WARN (ENABLED with the previous state not READY) and calls ops.enable() a second time. Gate scx_enable_task() on the task's class in both loops. Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling") Signed-off-by: Tejun Heo Reviewed-by: Andrea Righi Signed-off-by: Sasha Levin commit 6428093a4a986c38c9089b5eb32b56d914ef437a Author: Tejun Heo Date: Thu Jul 16 10:45:23 2026 -1000 sched_ext: Skip sub-disable teardown for never-linked sub-schedulers [ Upstream commit 8c13364db9c9a43ed286f3a8d0fb9477b1adc43c ] A sub-scheduler enable can fail before scx_link_sched() links the sched into the hierarchy, e.g. when the parent is already being disabled, and cleanup still runs the full scx_sub_disable(). That is racy against root disable: drain_descendants() is the only ordering between a sub's disable-time task walk and root disable's all-task teardown, and an unlinked sub is invisible to it. Root's teardown can thus run between the never-linked sub's drain and its walk, exiting every task to no scheduler. The walk then trips the membership WARN and re-homes the exited tasks onto the dying hierarchy, a use-after-free. Skip the cgroup ownership reset and the task walk if @sch was never linked, indicated by the empty ->sibling as unlinking only happens later in the same function. The membership WARN remains valid: a linked sub is always waited on by an ancestor's drain. Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling") Signed-off-by: Tejun Heo Reviewed-by: Andrea Righi Signed-off-by: Sasha Levin commit 592bc5000d6b5f083c79f74e869e87011c3eb458 Author: Tejun Heo Date: Thu Jul 16 10:43:25 2026 -1000 sched_ext: Reject setting disallow from init_task outside the enable path [ Upstream commit 477869bfafea65492d23de62c1b5208147c09dd2 ] The p->scx.disallow revert assumes the root enable path, where the switching loop reads the reverted policy right afterwards and leaves the task off SCX. The sub-scheduler disable path also reaches it when re-initializing the returned tasks on a root parent. Nothing reads the policy there: the task is enabled on root anyway and keeps running on the ext class with a silently rewritten policy. Kill the sched instead, matching the fork and non-root branches, and update the disallow documentation, which equated !fork with the load path and pointed at a stale debugfs path for nr_rejected. Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling") Signed-off-by: Tejun Heo Reviewed-by: Andrea Righi Signed-off-by: Sasha Levin commit de6f2b6c8d22b122aaf29e7d0044460ee3f9a14f Author: Dmitry Baryshkov Date: Wed Apr 29 01:27:12 2026 +0300 arm64: dts: qcom: sdm850-lenovo-yoga-c630: lower PSCI cluster idle [ Upstream commit 07db10de262f4150e24fd631a7a6c428f7bf80c9 ] With the default PSCI suspend value for cluster idle state Lenovo Yoga C630 isn't stable enough. For example it might reset if display device isn't probed early enough. Drop the bit 0x4000 from the PSCI suspend value to make C630 work in stable way. The bit was found by expertimenting with the cluster idle PSCI value. Most likely it results in the less deep sleep and more energy beign spent in the suspend state, but it's better than the non-stable system behaviour. Fixes: a1ade6cac5a2 ("arm64: dts: qcom: sdm845: Switch PSCI cpu idle states from PC to OSI") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20260429-c630-fix-idle-v2-1-ac867dad6f21@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 0a234a9a5c1e68db1442fb8df4b8e43f745e2c52 Author: Alexander Koskovich Date: Wed Apr 15 23:45:18 2026 +0000 arm64: dts: qcom: sm8650: Fix IPA IMEM slice [ Upstream commit 41d237b1546af5d5cf877175930cd23163422c83 ] Downstream the IPA IMEM slice for SM8650 is described as: qcom,additional-mapping = <0x14683000 0x14683000 0x2000>; Update upstream ipa_modem_tables to reflect downstream. Signed-off-by: Alexander Koskovich Fixes: 581fc5d5ade6 ("arm64: dts: qcom: sm8650: Explicitly describe the IPA IMEM slice") Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260415-fix-8650-ipa-modem-tables-v1-1-95f8f425e416@pm.me Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 1d724dc6193c3ef68ae51b54b71f7c58787a44fd Author: Krzysztof Kozlowski Date: Tue Apr 7 22:15:19 2026 +0200 arm64: dts: qcom: monaco: Add default GIC address cells [ Upstream commit d291245e2fb1eba55d751f88613a41e292958a96 ] Add missing address-cells 0 to GIC interrupt node to silence W=1 warning: monaco.dtsi:2326.4-2329.30: Warning (interrupt_map): /soc@0/pci@1c00000:interrupt-map: Missing property '#address-cells' in node /soc@0/interrupt-controller@17a00000, using 0 as fallback Value '0' is correct because: 1. GIC interrupt controller does not have children, 2. interrupt-map property (in PCI node) consists of five components and the fourth component 'parent unit address', which size is defined by '#address-cells' of the node pointed to by the interrupt-parent component, is not used (=0). Fixes: 46a7c01e7e9d ("arm64: dts: qcom: qcs8300: enable pcie0") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Manivannan Sadhasivam Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260407201518.24949-2-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit d15ef483c54daee1cdb99c0e5254969bcc02bc19 Author: Akhil P Oommen Date: Fri Apr 10 02:38:51 2026 +0530 arm64: dts: qcom: purwa: Fix GPU IOMMU property [ Upstream commit 4cd774c1feb3f720265c512174c5c3312eca1be2 ] Purwa's GPU does not support SID 1, which is typically used for LPAC-related traffic. Remove SID 1 from the GPU node's iommus property to accurately describe the hardware. This fixes the splat below, seen with some versions of Gunyah hypervisor: Internal error: synchronous external abort: 0000000096000010 [#1] SMP CPU: 0 UID: 0 PID: 80 Comm: kworker/u33:2 Tainted: G M Tainted: [M]=MACHINE_CHECK Hardware name: Qualcomm Technologies, Inc. Purwa IoT EVK (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_write_s2cr+0x9c/0xbc lr : arm_smmu_master_install_s2crs+0x78/0xa4 sp : ffff80008039b570 x29: ffff80008039b570 x28: 0000000000000000 x27: ffffaddd62f1ab78 x26: ffff00080a4ff280 x25: 0000000000000018 x24: ffff00080b896480 x23: ffff00080ba9b7a0 x22: ffff00080bb05160 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000001 x18: 00000000ffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008039b1d0 x14: ffff80010039b37d x13: 00746c7561662d74 x12: 0000000000000000 x11: ffff00080b7fbd98 x10: ffffffffffffffc0 x9 : ffffffffffffffff x8 : 0000000000000228 x7 : 0000000000000e87 x6 : 0000000000000000 x5 : 0000000000000000 x4 : ffff00080a4ff280 x3 : 0000000000000000 x2 : ffff800082a40c04 x1 : 0000000000000000 x0 : ffff800082a40000 Call trace: arm_smmu_write_s2cr+0x9c/0xbc (P) arm_smmu_master_install_s2crs+0x78/0xa4 arm_smmu_attach_dev+0xb0/0x1d8 __iommu_device_set_domain+0x84/0x11c __iommu_group_set_domain_internal+0x60/0x120 __iommu_attach_group+0x88/0x9c iommu_attach_device+0x6c/0xa0 msm_iommu_new.part.0+0x84/0xe4 [msm] msm_iommu_gpu_new+0x3c/0x104 [msm] adreno_iommu_create_vm+0x24/0xc8 [msm] a6xx_create_vm+0x48/0x78 [msm] msm_gpu_init+0x2d8/0x508 [msm] adreno_gpu_init+0x208/0x324 [msm] a6xx_gpu_init+0x604/0x8cc [msm] adreno_bind+0xb4/0x124 [msm] component_bind_all+0x114/0x23c msm_drm_init+0x1b0/0x1ec [msm] msm_drm_bind+0x30/0x3c [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x16c component_add+0x14/0x20 msm_dp_display_probe_tail+0x4c/0xac [msm] msm_dp_auxbus_done_probe+0x14/0x20 [msm] dp_aux_ep_probe+0x4c/0xf4 [drm_dp_aux_bus] really_probe+0xbc/0x29c __driver_probe_device+0x78/0x12c driver_probe_device+0x3c/0x15c __device_attach_driver+0xb8/0x134 bus_for_each_drv+0x88/0xe8 __device_attach+0xa0/0x190 device_initial_probe+0x50/0x54 bus_probe_device+0x38/0xa4 deferred_probe_work_func+0x88/0xc0 process_one_work+0x148/0x28c worker_thread+0x2cc/0x3d4 kthread+0x12c/0x204 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Fixes: 1aa0b4e36436 ("arm64: dts: qcom: x1p42100: Add GPU support") Signed-off-by: Akhil P Oommen Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260410-purwa-gpu-dt-fix-v1-1-4637892156cf@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 04d06aa023e3acbaf56b0b1adab581b32e9231e3 Author: Bjorn Andersson Date: Thu Jun 11 17:22:37 2026 +0000 arm64: dts: qcom: glymur: fix QUP serial engine IRQs [ Upstream commit a74a98f956ef8e075f28d58507bc5dad7f937fb4 ] The Geni serial-engine interrupts from QUP wrapper 0 all fall in ESPI INTIDs space. While some of the i2c instances has gotten their interrupt specifiers corrected, even the other functions on the same serial-engines are wrong. Ensure that all the serial engine interrupts for QUP wrapper 0 matches the datasheet. Assisted-by: Codex:GPT-5.5 Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi") Signed-off-by: Bjorn Andersson Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260611-glymur-geni-irqs-v1-1-269428faeb6d@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit f7b52b18c04d6c58bea7402ab7cf9695d1671b53 Author: Bjorn Andersson Date: Thu Jun 11 19:00:44 2026 +0000 arm64: dts: qcom: glymur: fix PCIe SMMU interrupts [ Upstream commit 52c7084c8fe57c259e50ff0a7d4f99ccecfc4c7a ] The PCIe SMMUv3 wired interrupts are routed to GIC extended SPI INTIDs 4100, 4098 and 4096. Describe them as ESPIs with the ESPI-relative interrupt numbers instead of regular SPIs 964, 962 and 960. Assisted-by: Codex:GPT-5.5 Fixes: 41b6e8db400c ("arm64: dts: qcom: Introduce Glymur base dtsi") Signed-off-by: Bjorn Andersson Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260611-glymur-pcie-smmu-espi-v1-1-5effbaa3e1af@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 5edbb409b0bc5001195f4b7cfca19122361211a1 Author: Ray Wu Date: Wed Aug 5 09:47:17 2026 +0800 drm/amd/display: Check for tg ops in dce110_set_avmute [ Upstream commit 3141e3d61469bba2624a91c5e2407f110b33b29e ] Some older DCE timing generators do not implement is_tg_enabled in their ops table. Calling it unconditionally when waiting for AV mute frames causes a NULL pointer dereference on Southern Islands dGPUs when turning the display off over HDMI. Check that tg and the required ops exist before waiting for frames. Fixes: 414da24137ac ("drm/amd/display: Add AV mute wait frames to dce110_set_avmute") Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5557 Tested-by: Viktor Jägersküpper Signed-off-by: Ray Wu Signed-off-by: Alex Deucher (cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 9d64e8854f5e8a995f3a60040bb7b3d09cd8b47a Author: Ray Wu Date: Mon Jul 13 22:23:34 2026 +0800 drm/amd/display: Add AV mute wait frames to dce110_set_avmute [ Upstream commit 443290d70b01e9c35830c300e3247c06581b594c ] Port the three-frame wait logic from dcn30_set_avmute to dce110_set_avmute so that older DCN versions (1.0, 2.0) also wait for GCP packets to be sent out before proceeding. This ensures HDMI sinks properly process the mute state, preventing garbled display after link re-establishment. Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167 Reviewed-by: Wayne Lin Signed-off-by: Ray Wu Signed-off-by: Fangzhi Zuo Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 414da24137ace80d8c59fefd43ba3ec9f5f854ba) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit e6a2f5f845f50b0c4299bace5111f56d3390a090 Author: Mark Tomlinson Date: Mon Aug 10 12:51:44 2026 +1200 gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock [ Upstream commit 9dc325327babe7f159e84cbe9380a45342da0585 ] Locking is disabled in the regmap config as this driver uses its own lock. This means that all calls to regmap functions (read or write) must hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do this, and it was therefore possible that multiple threads could cause an incorrect register to be read/written. A previous patch partly fixed this, but only protected the write to the interrupt mask register, and not the read from the direction register. Fixes: bfc6444b57dc ("gpio: pca953x: fix pca953x_irq_bus_sync_unlock race") Cc: stable@vger.kernel.org Signed-off-by: Mark Tomlinson Link: https://patch.msgid.link/20260709045116.2304246-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Bartosz Golaszewski (cherry picked from commit 9dc325327babe7f159e84cbe9380a45342da0585) Signed-off-by: Sasha Levin commit 7fd0235c438cd740baef214770cdcd808acce49b Author: Mykyta Yatsenko Date: Sat Aug 8 09:42:11 2026 -0300 selftests/bpf: Add tests for sleepable tracepoint programs [ Upstream commit 8a20655749c625dcc4debdfdeeaa0cf8bb85c203 ] Cover all three sleepable tracepoint types (tp_btf.s, raw_tp.s, tp.s) and sys_exit (via bpf_task_pt_regs) with functional tests using bpf_copy_from_user() on getcwd. Verify alias and bare SEC variants, bpf_prog_test_run_raw_tp() with BPF_F_TEST_RUN_ON_CPU rejection, attach-time rejection on non-faultable tracepoints, and load-time rejection for sleepable tp_btf on non-faultable tracepoints. [ rbm: Removed hunks from (new) files: tools/testing/selftests/bpf/prog_tests/sleepable_tracepoints.c tools/testing/selftests/bpf/progs/test_sleepable_tracepoints.c tools/testing/selftests/bpf/progs/test_sleepable_tracepoints_fail.c These rely on libbpf's ".s" tracepoint section handlers (0cd420a6f40c7) and on kernel-side sleepable tracepoint runtime support (439ebd5b5708, 12628ffaf98b, 57918341dd19), none of which are backported here; kept only the verifier/sleepable.c hunk, which is correct and needed on its own. ] Signed-off-by: Mykyta Yatsenko Acked-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-6-99005dff21ef@meta.com Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 070d4ce6776f67e1a0adb43983fa33e8fe4f181b Author: Michal Luczaj Date: Sat Aug 8 09:41:11 2026 -0300 selftests/bpf: Fail unbound UDP on sockmap update [ Upstream commit 203b06932777b9ad5085319389dea566f5c2ca63 ] sockmap now rejects unbound UDP sockets. Adjust test_maps. While at it, check socket()'s return value. This effectively reverts commit c39aa2159974 ("bpf, selftests: Fix test_maps now that sockmap supports UDP"). Signed-off-by: Michal Luczaj Reviewed-by: Kuniyuki Iwashima Reviewed-by: Jakub Sitnicki Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-4-f878346f27ab@rbox.co Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Ricardo B. Marlière (SUSE) Signed-off-by: Sasha Levin commit 300bb214c9388ccb84f76143bf7e48c921647387 Author: Al Viro Date: Tue Jun 2 03:04:44 2026 +0100 mount: honour SB_NOUSER in the new mount API [ Upstream commit 6dd3c6884cd9defb511284b566cef5ac8f657dbf ] One should *not* be allowed to mount one of those, new API or not. Reported-by: Denis Arefev Signed-off-by: Al Viro Link: https://patch.msgid.link/20260602020444.GP2636677@ZenIV Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin