commit b5a1dc3ad4822c6edfb53429e9a3759c9b0ac2be Author: Greg Kroah-Hartman Date: Fri Oct 30 13:04:30 2026 +0100 Linux 6.6.161 Link: https://lore.kernel.org/r/20261028165943.089486480@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Florian Fainelli Tested-by: Peter Schneider Tested-by: Pavel Machek (CIP) Tested-by: Miguel Ojeda Tested-by: Ron Economos Tested-by: SJ Park Tested-by: Shuah Khan Tested-by: Wentao Guan Tested-by: Barry K. Nathan Signed-off-by: Greg Kroah-Hartman commit 9ab0324f4868eeb20c63f063a1e5bc01d5539212 Author: Christian Brauner Date: Mon Aug 24 14:08:20 2026 +0200 pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper commit 5c0985dd3c32fc2bbd0e8beaf13cf52cd97376a2 upstream. Since commit 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes() clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise kernel_wait4() doesn't sleep and returns -ERESTARTSYS if signal_pending() is true and the reaper busy-waits. But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again. For example, klp_send_signals() sets it raw against any task that hasn't transitioned yet. And it keeps sending it until the livepatch finishes. The sleep loop waiting for pid_allocated to drop has the same problem and it doesn't even clear anything. So a schedule() in TASK_INTERRUPTIBLE returns immediately. Use a no_notify_signal guard. signal_pending() will ignore TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child exits or free_pid() wakes it. Link: https://patch.msgid.link/20260824-work-tif_notify_signal-v2-5-6609e42b3157@kernel.org Fixes: 7fea700e04bd ("zap_pid_ns_processes: clear TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") Reviewed-by: Oleg Nesterov Cc: stable@vger.kernel.org Suggested-by: Oleg Nesterov Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 9fdbfd1a15a3e67539535f1682f15f475c081c52 Author: Christian Brauner Date: Mon Aug 24 14:08:16 2026 +0200 signal: allow taks to temporarily block TIF_NOTIFY_SIGNAL commit 22b7f491be8f93ff72de0a3fe02b8ee9e64d3f21 upstream. TIF_NOTIFY_SIGNAL is used to kick a task in uninterruptible sleep to return to userspace and run task work and then go back to sleep. This mechanism works well but breaks e.g., coredumps. dump_interrupted() only allows fatal signals to interrupt a coredump and the whole regular write path going to actual filesystems is impervious to TIF_NOTIFY_SIGNAL as well. Add PF_NO_NOTIFY_SIGNAL and helpers to raise and restore it. This is the same approach as memalloc_nofs_save(). signal_pending() will not report a fake pending signal via TIF_NOTIFY_SIGNAL if inside a PF_NO_NOTIFY_SIGNAL section. No functional changes. Link: https://patch.msgid.link/20260824-work-tif_notify_signal-v2-1-6609e42b3157@kernel.org Reviewed-by: Oleg Nesterov Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 4d1fdb850d016aab4336006400e0181e1c327783 Author: Christian Brauner Date: Mon Sep 21 15:44:58 2026 +0200 ptrace: refuse to change the signal mask of a user worker commit cabc249e6560bee7bdfee9fbcb7ce4e951dcfd41 upstream. A user worker is created with every signal other than SIGKILL and SIGSTOP blocked. It never runs user code and that mask is what keeps get_signal() from dequeuing anything else for it. complete_signal() never picks a thread that blocks the signal, tkill() queues on the worker but nothing dequeues it. ptrace_signal() requeues an injected signal that the tracee blocks. PTRACE_SETSIGMASK is the only way to change that mask from the outside. A tracer that clears it makes the worker eligible for every signal. Whatever the worker then dequeues it can only act on by leaving. Refuse PTRACE_SETSIGMASK for a user worker with -EPERM, the way ptrace_attach() refuses a kernel thread. A worker is guaranteed to only ever dequeue SIGKILL or SIGSTOP and an injected signal stays pending on it, which is what already happens when the mask isn't touched. Taking the request and quietly leaving the mask alone was the other option, the way set_current_blocked() keeps SIGKILL and SIGSTOP unblocked whatever userspace asks for. But then a tracer gets success back with nothing changed and no way to tell that apart from a mask that took effect. Fixes: e8b33b8cfafc ("Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals"") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-9-8e4adb1619e6@kernel.org Acked-by: Oleg Nesterov Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit ec2c8af51ccd5d99cb5b81a7b974d33c155c2dcb Author: Christian Brauner Date: Tue Sep 22 15:26:16 2026 +0200 signal: only SIGKILL and the freezers interrupt a coredumping task commit 563d606b93d7a1d23512832fc252d32c68860d87 upstream. For quite a while now coredump has allowed either SIGKILL or freezing to interrupt an ongoing coredump. Since we seem to like it complicated "freezing" can mean a lot of things: (1) Power Management induced freezing (2) cgroup v1 freezer controller induced freezing (3) cgroup v2 freezer controller induced freezing So (1) and (2) are handled by checking freezing() but (3) isn't. (3) uses cgroup_freeze_task() which sets JOBCTL_TRAP_FREEZE and calls signal_wake_up() on every task in the cgroup. The trap isn't handled by the coredump code. Which means the current logic is inconsistent. Power and cgroup v1 freeze and abort the coredump. With cgroup v2 it depends on where the core goes. A dump to a file completes and the cgroup v2 freeze has to wait for it to finish. When dumping to a pipe or socket the dump is interrupted at the next write because of trap's TIF_SIGPENDING. Which is it? Let's be consistent and align (1)-(3): freezing interrupts an ongoing coredump and doesn't make it wait until the dump is done. All three freezers go through signal_wake_up() and so set TIF_SIGPENDING on the dumper. And once zap_threads() has set core_state that flag can't mean anything else anymore. prepare_signal() drops every signal but SIGKILL for the group, the dying threads don't retarget shared signals to the dumper, and zap_process() cleared the pending job control traps. So the flag is the thing to check. Let dump_interrupted() test task_sigpending() and nothing else. That is also what the pipe and socket writes already fail on. TIF_NOTIFY_SIGNAL is left out on purpose, task work must not cut a dump short. A seized tracee that gets PTRACE_INTERRUPT during the dump is cut short the same way. It already was for pipes and sockets. The one freeze that check can miss is one requested before the dump started. zap_threads() clears TIF_SIGPENDING and the cgroup v2 freezer only wakes a task once while its JOBCTL_TRAP_FREEZE isn't part of JOBCTL_PENDING_MASK and survives zap_process(). So refuse to start the dump when freezing() is true or the trap is pending. The task then exits without dumping, which is what happens today when the freeze interrupts the dump at the first write. Fixes: 403bad72b67d ("coredump: only SIGKILL should interrupt the coredumping task") Fixes: 76f969e8948d ("cgroup: cgroup v2 freezer") Cc: stable@vger.kernel.org Suggested-by: Oleg Nesterov Link: https://lore.kernel.org/r/arJ6zZuI59BJnXpl@redhat.com Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-2-8e4adb1619e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 105ca21eb33567590d3e9b40bff0bc5c850966fd Author: Christian Brauner Date: Mon Sep 21 15:44:54 2026 +0200 signal: don't retarget shared signals in a dying thread group commit c0e659511d4f49087da095a95799edb5b775a705 upstream. If the calling thread has blocked a signal then retarget_shared_pending() slingshots a shared pending signal to a sibling thread. Today it only skips PF_EXITING threads but not a coredumping thread. But if SIGNAL_GROUP_EXIT is set no thread in the thread-group can dequeue such signals anymore as get_signal() sends SIGKILL to every thread and prepare_signal() drops any other signal. exit_signals() also returns early on SIGNAL_GROUP_EXIT. But neither sigprocmask() nor the mask restore in sigtimedwait() do. Say a thread sleeps in sigtimedwait() and a sibling thread crashes. The sleeping thread gets woken by the zap call. It restores its mask on the way out and retargets a signal that was queued for the coredumping process. That means TIF_SIGPENDING is set on the coredumping task which zap_threads() had cleared. So a blocking write sees TIF_SIGPENDING and truncates the dump. Stop retargeting signals when SIGNAL_GROUP_EXIT is set and avoid needlessly truncating coredumps. Fixes: e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") Cc: stable@vger.kernel.org Acked-by: Oleg Nesterov Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-5-8e4adb1619e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 71146c437bae59e5280f657965dc6d006ee3989b Author: Christian Brauner Date: Mon Sep 21 15:44:50 2026 +0200 coredump: hold RCU while releasing parked threads commit 61d58591aa0188bf2463e263962256316ff8b576 upstream. coredump_finish() releases the parked threads by clearing ->task in their core_thread entry and calling wake_up_process() on each of them. It does that without holding a reference on the task and without being inside rcu. But calling wake_up_process(task) without rcu here isn't safe. A parked thread doesn't need that wakeup to leave. A spurious wakeup or a preemption after the store is enough for the task to go away. So if the coredump client is preempted between the store and wake_up_process() the thread can exit and be freed in the meantime and try_to_wake_up() takes pi_lock in freed memory. Hold rcu across the loop. Fixes: a94e2d408eae ("coredump: kill mm->core_done") Cc: stable@vger.kernel.org Acked-by: Oleg Nesterov Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-1-8e4adb1619e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 0e5ff07be834abaf4280e1dca7f9591e339d0960 Author: Aaron Ahmed Date: Fri Oct 16 23:04:03 2026 +0000 ftrace: Initialize modname and offset in print_rec() commit e1f339ff3b83857b93baf8b88186275a413d445e upstream. print_rec() leaves 'modname' and 'offset' uninitialized and kallsyms_lookup() only sets them on success. When the lookup fails like when a module is being loaded or unloaded, 'modname' holds a garbage value, passes the 'if (modname)' check, and is dereferenced by seq_printf(). Oops: general protection fault RIP: 0010:string+0x48/0xe0 Call Trace: vsnprintf+0x1f5/0x650 seq_printf+0x8e/0xb0 print_rec+0x6c/0xc0 t_show+0x4c/0x440 seq_read_iter+0x119/0x480 This can be triggered by reading available_filter_functions while a module is being loaded or unloaded. Initialize both variables so a failed lookup skips the module name. Cc: stable@vger.kernel.org Fixes: b39181f7c690 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function") Link: https://patch.msgid.link/20261016230403.4916-1-aarnahmd@amazon.com Tested-by: Gavin Inglis Signed-off-by: Aaron Ahmed Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 7f0728ba89624e25df2bb80ff59bbfb545060935 Author: Weiming Shi Date: Sun Sep 6 19:01:53 2026 +0800 asymmetric_keys: reject trust keys without IDs commit 9695df3b1db4ac4534274d38ee16e3b9b0bf910e upstream. The PKCS#8 parser deliberately leaves the asym_key_ids payload slot empty. key_or_keyring_common() unconditionally dereferences that slot when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the plain and :chain forms reach this branch, allowing an unprivileged caller to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING followed by add_key(). Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279) Call Trace: __key_create_or_update (security/keys/key.c:884) key_create_or_update (security/keys/key.c:1021) __do_sys_add_key (security/keys/keyctl.c:134) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Kernel panic - not syncing: Fatal exception Reject an asymmetric restriction key without key IDs. A PKCS#8 private key cannot identify the signer of a candidate certificate and is not a valid trust anchor. Fixes: 3c58b2362ba8 ("KEYS: Implement PKCS#8 RSA Private Key parser [ver #2]") Cc: stable@vger.kernel.org Reported-by: Xiang Mei Link: https://lore.kernel.org/r/20260429181629.110802-2-bestswngs@gmail.com Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 234d09bb3b3d84851d4b3246272addc30f3353eb Author: Srish Srinivasan Date: Sat Sep 12 11:59:49 2026 +0530 keys/trusted_keys: return immediately after TPM unseal failure commit f92d0ccb05bf9089072cb067dda0dffd5394c4ef upstream. trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation fails. If pcrlock() succeeds, its return value overwrites the unseal error, causing key instantiation to succeed. Return immediately when unseal fails to preserve the original error. Cc: stable@vger.kernel.org # v5.15+ Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework") Signed-off-by: Srish Srinivasan Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260912062950.279104-2-ssrish@linux.ibm.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit c77401946b5bfce19ca931714d42ad6de21172ae Author: Stefano Garzarella Date: Wed Sep 23 19:35:06 2026 +0200 KEYS: trusted: Fix blob allocation size in tpm2_key_decode() commit 11077cbcc2695f71c944a84a5f08c6672ab759f1 upstream. tpm2_key_decode() allocates 4 bytes more than needed. The ASN.1 callbacks tpm2_key_priv() and tpm2_key_pub() provide the lengths of TPM2B_PRIVATE and TPM2B_PUBLIC, so ctx.priv_len and ctx.pub_len already account for the 2-byte `size` field each of those structures starts with. I noticed this while reviewing commit 114f00d738f1 ("KEYS: trusted: Fix tpm2_load_cmd() boundary check"), which correctly reports ctx.priv_len + ctx.pub_len as the decoded blob size [1]. Let's allocate exactly that amount, matching the data copied into the blob. [1] https://lore.kernel.org/linux-integrity/apfoKo-BdwaLXtkT@sgarzare-redhat/ Cc: stable@vger.kernel.org # v5.13+ Fixes: f2219745250f ("security: keys: trusted: use ASN.1 TPM2 key format for the blobs") Signed-off-by: Stefano Garzarella Link: https://lore.kernel.org/r/20260923173506.41519-1-sgarzare@redhat.com Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 19dfc37c9deefa69dc805d01d35d1f2fd7902e33 Author: Adrian Martinez Date: Sat Oct 10 23:40:00 2026 +0300 KEYS: Fix key_reject_and_link() race with keyring restriction commit 0b157166e612b70f98a332b6c7be7eac6f8e9593 upstream. The restrict_link check in key_reject_and_link() is done before taking the keyring semaphore, racing with a concurrent keyring_restrict() that installs the restriction while holding the semaphore in write mode. Move the check to after __key_link_lock(), so it is done under the semaphore, matching the pattern used in __key_create_or_update(). Cc: stable@vger.kernel.org Fixes: 5ac7eace2d00 ("KEYS: Add a facility to restrict new links into a keyring") Reviewed-by: Jarkko Sakkinen Signed-off-by: Adrian Martinez Link: https://lore.kernel.org/r/CACO1+RT+m==BY+ZPkE+fo536D0qu3wog4xE1dfuXQ56g+=Qv=A@mail.gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit ff44f1b303aa76a818d898e85c56ed4852c031e2 Author: Cen Zhang Date: Mon Oct 19 22:57:21 2026 +0800 keys: Protect the read method check against type removal commit 925c84e3cc21caf09de92d9bcafab0147790debf upstream. keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore. Assisted-by: LLM Cc: stable@vger.kernel.org # v5.10+ Fixes: d3ec10aa9581 ("KEYS: Don't write out to userspace while holding key semaphore") Suggested-by: Jarkko Sakkinen Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Reviewed-by: David Howells Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0010-v7-fc85721ff5cfb9e33ac6@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 8451d4a4c43127c3b9fdf9fc9ff3fea5539a61f9 Author: Kyle Zeng Date: Tue Oct 13 16:12:51 2026 -0700 keys: make keyring indexes independent of kernel addresses commit de891c73c1cf41ac8de12c07fa2c84d6a912ad0c upstream. KEYCTL_READ returns the serial numbers in a keyring in associative-array traversal order. The first word of the index is a public, deterministic hash of the type pointer, domain pointer and description. An unprivileged user can therefore insert keys with known descriptions, predict their order for each possible KASLR slide, and recover the kernel image address. On an x86-64 build with 16 MiB alignment, 45 user keys suffice to distinguish the candidate slides. Remove the addresses from the whole index, not just its first hash word. Assign each key type and domain a nonzero 64-bit ID and hash those IDs and the description with a once-initialized SipHash key. Use the full IDs in the later index chunks as well. Truncating or hashing the IDs there would lose the guarantee that distinct type/domain/description tuples have a differing index bit. Allocate IDs lazily since private key types need not be registered. Cache them in the index key so tree walks and copies of an existing index do not need to dereference a type descriptor that may have been unregistered. Keep the 32-bit chunk layout and diff_objects() bit offsets consistent, and retain the separate root slot for keyrings used by recursive search. The key comparison, permissions and userspace data format are unchanged; only the address-dependent in-memory ordering is replaced. Cc: stable@vger.kernel.org Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Assisted-by: Codex:gpt-6-astra Signed-off-by: Kyle Zeng Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20261013231251.56170-1-kylebot@openai.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit dddd3a1ab7d12ee163477918ff6eb943361db4fe Author: Cen Zhang Date: Fri Oct 9 13:11:03 2026 +0800 keys: Protect the type name while describing a key commit fced7238b7e80cf8aa688d5af976e4aa6e33c329 upstream. keyctl_describe_key() must keep the key type's name alive until kasprintf() has consumed it. The retained key reference keeps the key and its description alive, but does not pin the module providing its type. The name is passed to kasprintf() without holding key->sem. kvasprintf() uses the saved name pointer in two formatting passes, with a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that passes View permission before type retirement can overlap a privileged module unload in this order: 1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the kasprintf() arguments and completes the first formatting pass. 2. While the formatter is delayed before its second pass, af_rxrpc_exit() calls unregister_key_type(), which removes the type from the registry and waits for key_gc_keytype(). 3. The collector takes key->sem for writing, retypes the retained key to key_type_dead and completes retirement. Unregistration and module exit return, allowing free_module() to release the type and name. 4. The formatter resumes its second pass and reads the saved name from released module storage, which can fault in string(). Hold key->sem for reading across kasprintf(). The collector then cannot retype the key or complete retirement until both formatting passes have finished. If retirement wins the lock first, formatting uses the core key_type_dead name instead. Release the semaphore immediately after kasprintf(), including on allocation failure, before copying to userspace. Oops report as below: BUG: unable to handle page fault for address: fffffbfff8054794 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:string+0x23f/0x470 Call Trace: vsnprintf+0x330/0x1110 Cc: stable@vger.kernel.org Fixes: aa9d4437893f ("KEYS: Fix the size of the key description passed to/from userspace") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0009-v4-6b537c5732fd957c33fa@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 26949c2e4c461e9e620e935bc22717f36a40b615 Author: Cen Zhang Date: Fri Oct 9 13:52:16 2026 +0800 keys: Check the authorization payload in process keyring searches commit 0a0ec45bf577a9b4d4960567f20d3877ef480de9 upstream. An authorization payload and its saved credentials must remain valid while search_process_keyrings_rcu() searches the requestor's keyrings. The function validates the authorization key, then separately loads payload.data[0] and unconditionally reads rka->cred. Validation does not prevent request_key_auth_revoke() from clearing the payload. A request-key helper can assume authority and fork a descendant that inherits the authorization key. If the descendant misses in its own keyrings, it falls back to the saved requestor credentials. Successful target instantiation invalidates the authorization key without clearing the payload. After the helper exits, UMH_WAIT_PROC returns to the requester, which calls complete_request_key() and revokes that key. With the descendant paused after validation, the paths can interleave as follows: 1. The descendant enters search_process_keyrings_rcu() under RCU and key_validate() succeeds. 2. The helper instantiates the target, invalidates the authorization key, and exits. 3. The requester resumes from UMH_WAIT_PROC, calls complete_request_key(), and revokes the authorization key. request_key_auth_revoke() sets its payload pointer to NULL. 4. The descendant loads NULL and dereferences rka->cred. This NULL dereference can oops the kernel. RCU delays payload disposal but does not prevent the pointer from being cleared. Load the payload with dereference_key_rcu() and require a non-NULL result before validating the authorization key and searching its saved credentials. A non-NULL payload and its credentials remain alive for the caller's RCU read-side section; a cleared payload skips the fallback search and follows the existing error selection. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:search_process_keyrings_rcu+0x32b/0x790 Cc: stable@vger.kernel.org Fixes: e59428f721ee ("keys: Move the RCU locks outwards from the keyring search functions") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0004-v3-598361863b76bc25d58d@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit aa03c8fb4334f14d218020f7431debf2b7766865 Author: Cen Zhang Date: Fri Oct 9 13:11:59 2026 +0800 keys: Avoid the owner account dereference in named keyring lookup commit 51409aaa01f8602552c336009fd22b226b0cdf1d upstream. Named keyring lookup must keep the storage containing the owner UID alive through the namespace mapping check. find_keyring_by_name() reads keyring->user->uid under keyring_name_lock, but that lock protects the keyring's name entry and allocation, not its separate key_user. A named session-keyring join can overlap a privileged KEYCTL_CHOWN on another CPU. If the keyring holds the last reference to its old dynamic key_user and the ownership transfer succeeds, the following ordering is possible: Named join Chown find_keyring_by_name() keyctl_chown_key() read_lock(keyring_name_lock) down_write(key->sem) load old keyring->user replace key->user and key->uid up_write(key->sem) key_put(key) key_user_put(old user): free read old user->uid read_unlock(keyring_name_lock) Chown neither takes keyring_name_lock nor key_session_mutex, so it can free the old account between the pointer load and the UID read. The lookup then reads freed memory even though the keyring itself is alive. Use keyring->uid for the mapping check. key_alloc() initializes this inline owner UID and keyctl_chown_key() updates it on chown. The existing name lock keeps its containing keyring allocated throughout the check, so lookup no longer depends on the account's lifetime. This also matches the owner UID used by the permission check. KASAN report as below: BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0 Read of size 4 at addr ffff8881128ae2ec by task keycase/500 Cc: stable@vger.kernel.org Fixes: 2ea190d0a006 ("keys: skip keys from another user namespace") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0002-v3-2baa8cad2bb554364e10@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 89f0290fc28566a1592383b41fa42b802fb52181 Author: Jens Axboe Date: Fri Oct 16 09:15:13 2026 -0600 io_uring/poll: don't loop on HUP with multiple references Commit 67bb1ad9a517bedf1e1599fe5448620b9f38bf2a upstream. io_poll_check_events() drops down to one reference when a multishot request sees HUP with more than one, so that the loop goes around once more. It did so by subtracting one less than it had. With the cmpxchg that only takes the local count down: the exchange fails, the next pass reads the unchanged count, and goes through the same motions again. The loop then only ends once io_poll_issue() stops the request. Drop the extra references from the counter instead, and loop once more without trying the exchange. The next pass sees one reference, like it did before, and ends unless a wake up came in. [ 6.6: v still carries the flag bits here, mask it for the subtraction ] Fixes: 937d38dcacd6 ("io_uring/poll: avoid retry wakeup loss when dropping ownership") Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 68cd06ba918d9658c36c1973a0184795738dcc46 Author: Jens Axboe Date: Thu Oct 15 16:38:45 2026 -0600 io_uring/timeout: don't lose a cancel as io-wq arms a timeout Commit 89f193dc3ef462059387e9691bf6af4b1808379a upstream. An IORING_OP_TIMEOUT run by io-wq, because of IOSQE_ASYNC, has the same problem as poll, futex and waitid. io_wq_submit_work() looks at IO_WQ_WORK_CANCEL once, before it issues the request. A cancel in between flags the work, gets -EALREADY, and searches ->timeout_list in vain, while the worker then adds the request and starts the timer: io-wq worker io_try_cancel() io_wq_submit_work() IO_WQ_WORK_CANCEL isn't set io_async_cancel_one() sets IO_WQ_WORK_CANCEL = -EALREADY io_timeout_cancel() = -ENOENT io_timeout() adds the request to ->timeout_list hrtimer_start() = IOU_ISSUE_SKIP_COMPLETE Nobody looks at the flag again, and the timeout runs its course. At ring exit, io_uring_try_cancel_requests() cancels io-wq work and then kills the timeouts the same way, so an exiting task can get stuck for the full duration of such a timeout. Look at the flag under ->timeout_lock, which the search takes as well, and fail the request if it is set. If the search came first, the flag is visible. If it comes later, it finds the request on the list. [ 6.6: carries the __io_wq_cancel_seen()/io_wq_cancel_seen() helpers that the futex/waitid fix 5cb049d2203d brought upstream; work->flags is not atomic and ->timeout_lock isn't raw here ] Fixes: ce35a47a3a02 ("io_uring: add IOSQE_ASYNC") Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 838475965e5e3173184010f5c09b5ac8b17b64bd Author: Jens Axboe Date: Thu Oct 15 14:25:00 2026 -0600 io_uring/timeout: don't flush with the sequence behind the last flush Commit 85f85d573ffa7772e1ad4504d0cec5113a5c5cf1 upstream. io_flush_timeouts() measures the events since the last flush as the distance of the current sequence from ->cq_last_tm_flush. A fired timeout bumps ->cq_timeouts before its CQE is posted, so until it is the sequence can be behind the last flush, and the distance wraps: last flush: seq 100, cq_last_tm_flush = 100 Y: IORING_OP_TIMEOUT, off 50, target_seq 150 pure timeout A fires, cq_timeouts = 1 task_work posts A's CQE, cached_cq_tail = 101 pure timeout B fires before the flush, cq_timeouts = 2 io_flush_timeouts(): seq = 99, events_got = 0xffffffff Y, and every sequence timeout behind it, is ended with -ETIME although no event happened. Two timeouts expiring close together is all it takes, a completion with IOSQE_CQE_SKIP_SUCCESS after a single one does it too. Nothing but those in flight CQEs separates the two, so count from the last flush when the sequence is behind it, as io_timeout() does. Fixes: f010505b78a4 ("io_uring: flush timeouts that should already have expired") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit ee081d232e8f60963c50de3130f43b1af8443419 Author: Jens Axboe Date: Thu Oct 15 14:18:22 2026 -0600 io_uring/timeout: don't put a sequence target behind the last flush Commit fdfce905a58edea053ee7b68b5bd4348dd1b36e0 upstream. io_timeout_fn() and io_kill_timeout() bump ->cq_timeouts when a timeout fires, but its CQE is only posted later from task_work. Until then the sequence io_timeout() computes is one below the last flush per fired timeout. Now that ->cq_last_tm_flush is kept while sequence timeouts are pending, a timeout armed in that window with a small offset gets a target behind the base. Its distance from the base wraps, and it's never completed by events, only by its timer. With DEFER_TASKRUN that window is as wide as the application makes it, as submission runs before the local task_work. Nothing but those in flight CQEs separates the two, so use the last flush as the base for the target when the sequence is behind it. Fixes: c6c0b3eba88c ("io_uring/timeout: don't skip over reached sequences") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 41fae2e9e1fa3bee86aee0a25ba90e59ce5024bf Author: Juanlu Herrero Date: Tue Oct 13 15:37:20 2026 -0700 io_uring/poll: avoid retry wakeup loss when dropping ownership Commit 937d38dcacd675dc0572d6c9b6743960df3128ed upstream. If a wakeup sets IO_POLL_RETRY_FLAG between the owning task consuming the existing instance of IO_POLL_RETRY_FLAG and the loop check of io_poll_check_events(), then we stall on processing the request until an unrelated wakeup comes along. Using atomic_cmpxchg instead of atomic_sub_return to guarantee both the count v and poll_refs are 0 and no wake-ups are missed. Cc: stable@vger.kernel.org Fixes: a26a35e9019f ("io_uring: make poll refs more robust") Signed-off-by: Juanlu Herrero Assisted-by: LLM Suggested-by: Anand Natarajan Link: https://patch.msgid.link/20261013-pu-cmpxchg-v1-1-4ddc10fd8a03@fastmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit c276be0c83ee073b823b1ab44551c0eb7e3ff0e6 Author: Josef Bacik Date: Thu Oct 15 19:31:07 2026 +0000 io_uring: look up the file before queueing to io-wq Commit 98bc044d5a5374f8d3605fe55a8e2df6d6fc3f82 upstream. io_prep_async_work() decides by the file of a request what kind of work it is for io-wq. I/O on regular files and block devices is bounded work, limited to min(SQ entries, 4 * CPUs) workers, for anything else that may block indefinitely the limit is RLIMIT_NPROC. Writes to a regular file are hashed by the inode, so that they are run one after the other instead of having a bunch of workers fight for the inode lock. Since the file is only assigned when a request is issued, a request that is queued without an attempt to issue it, REQ_F_FORCE_ASYNC, doesn't have one at that point. io_prep_async_work() takes that for "not a regular file or block device": - Reads and writes end up as unbound work. 32 reads with IOSQE_ASYNC from a slow block device on a ring with 4 SQ entries get 32 workers, not 4. - Writes aren't hashed. Four buffered writes to one file get four workers, three of which do nothing but wait for the lock. The late assignment is for the benefit of links, where a request may use a fixed file that one of its predecessors installs. By the time a request gets to io_queue_iowq() these are done, it is as good as issued. Assign the file there. io_assign_file() moves up and is forced inline. With a third caller the compiler may stop inlining it, and every request that is issued would pay for a call. IORING_OP_SPLICE is left as it is, unbound and not hashed. The file of the request is where it writes to, which says nothing about how long it takes: a splice from an empty pipe or a socket into a regular file waits for its input. As bounded work, four of these on a ring with 4 SQ entries keep all other bounded work of the task from running, and as hashed work one of them blocks all writes to that file. REQ_F_FORCE_ASYNC is not only set for IOSQE_ASYNC. What changes, and brings back what was the case before the file assignment was deferred: - Requests with IOSQE_ASYNC or IOSQE_IO_DRAIN, and all requests that are submitted while a drain is active: reads and writes on regular files and block devices count against the limit for bounded workers, including the one set with IORING_REGISTER_IOWQ_MAX_WORKERS, so fewer of them run at the same time. - Of these, writes to one regular file are run one at a time, unless they are O_DIRECT and the filesystem has FOP_DIO_PARALLEL_WRITE. - IORING_OP_FALLOCATE and IORING_OP_FTRUNCATE, which always go to io-wq, are run one at a time per file, and in turn with these writes. - The descriptor or the fixed file slot is looked up when the request is queued, not when a worker gets around to it, so closing or replacing it in between no longer has an effect on the request. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-43-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit c614af6826ca2f4de4c05df814da9c2f123ee2d0 Author: Josef Bacik Date: Thu Oct 15 19:31:05 2026 +0000 io_uring/timeout: no ABS update of multishot timeouts Commit b088ae34d4da730dc647261b893a6eb622fe5e1f upstream. IORING_TIMEOUT_MULTISHOT can't be combined with IORING_TIMEOUT_ABS, prep rejects that, as the request is armed again with the same value each time it fires. IORING_TIMEOUT_UPDATE doesn't check and takes an absolute time for a multishot timeout. The first expiry is as asked for, but io_timeout_complete() then arms the timer with ->mode of the original request, i.e. it uses the absolute time as the interval. With CLOCK_MONOTONIC the next expiry is an uptime away, with CLOCK_REALTIME more than fifty years. Fail such an update with -EINVAL, and do so before the timeout is touched. Fixes: ea97f6c8558e ("io_uring: add support for multishot timeouts") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-41-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit ec267cd430ee401de262035817b6f2b71637ae43 Author: Josef Bacik Date: Thu Oct 15 19:31:03 2026 +0000 io_uring: don't pass restart error codes to userspace Commit e1a64bc64897f4c2fe460922c345f2ed8f889b5f upstream. -ERESTARTSYS and friends are instructions for the system call exit code, which either restarts the call or turns them into -EINTR. They are not supposed to be seen by applications. A request isn't a system call, nobody looks at what it returns before that is put into a CQE. The read/write and the networking opcodes convert these codes to -EINTR by hand. The others don't. An io-wq worker that is blocked in the open of a FIFO, a tty or some other device, or in a splice from an empty pipe, and that gets interrupted because the request is cancelled, completes it with -512: IORING_OP_OPENAT, IOSQE_ASYNC // FIFO without a writer IORING_OP_ASYNC_CANCEL // -EALREADY, worker is signalled CQE of the open: res == -512 There are more candidates, like whatever a file system or driver returns from ->flush(), ->fsync(), ->fallocate() or ->uring_cmd(), or breaking a lease or delegation. Take care of it in io_issue_sqe(), which all of them go through. The helper is moved from rw.c as is. The cost is a compare and a branch that is not taken per request. [ 6.6: io_issue_sqe() returns IOU_OK and an error straight away ] Fixes: 15b71abe7b52 ("io_uring: add support for IORING_OP_OPENAT") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-39-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 9786f24078e304278ab67d51b8d3131d8269938d Author: Josef Bacik Date: Thu Oct 15 19:31:01 2026 +0000 io_uring/sqpoll: let the thread sleep on disabled rings Commit d492dcbb3b81c1c2d0aabef41fa1307093f3a556 upstream. __io_sq_thread() doesn't submit anything as long as the ring has IORING_SETUP_R_DISABLED set. The check that keeps the SQPOLL thread from going to sleep while the SQ ring holds entries doesn't know about that. If an application fills in SQEs first and enables the ring later, the thread finds that there is work each time it is about to sleep, goes around, doesn't submit it, and so on. It uses up a CPU until the ring gets enabled. Entries in the SQ ring of a disabled ring are no reason to stay awake. io_register_enable_rings() clears the flag and then wakes the thread, and the flag is looked at after prepare_to_wait(), so the thread can't miss that. Fixes: 0298ef969a11 ("io_uring: clean R_DISABLED startup mess") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-37-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit f592e45df49c91a26090d54bb48c24e8ae68f969 Author: Josef Bacik Date: Thu Oct 15 19:30:54 2026 +0000 io_uring/timeout: keep repeat count on multishot update Commit 3dc2a32cd356ee382aa4a8c7d844c53b2c0ad83b upstream. IORING_TIMEOUT_UPDATE clears ->off of the timeout it updates, to turn a timeout that waits for a number of completions into a pure one. For a multishot timeout ->off isn't a sequence though, it tells whether the number of repeats is limited: io_timeout_finish() only looks at ->repeats if ->off is set. A multishot timeout that was set up to fire N times hence fires forever once its interval has been updated. Leave ->off alone for those, they are never treated as sequence timeouts anyway. Fixes: ea97f6c8558e ("io_uring: add support for multishot timeouts") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-30-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 93947570afbb91e5da26649a3f74a227f8ae56d4 Author: Josef Bacik Date: Thu Oct 15 19:30:53 2026 +0000 io_uring/timeout: don't skip over reached sequences Commit c6c0b3eba88c3b13ca11ea112404982e86d58f7a upstream. io_flush_timeouts() copes with the wrap of the CQ sequence by looking at the distance from ->cq_last_tm_flush. That relies on the target of each pending timeout being at or ahead of the last flush. io_timeout() breaks that. It sets ->cq_last_tm_flush to the current sequence, on the assumption that nothing has been posted since the last flush. That isn't true. A multishot request posts its CQEs right when it is issued or retried, but they are committed, and the timeouts flushed, at the end of the submission or task_work run: X: IORING_OP_TIMEOUT, off == 1 target_seq == N + 1 io_submit_sqes() multishot recv, posts two CQEs sequence == N + 2 Y: IORING_OP_TIMEOUT, off == 100 ->cq_last_tm_flush = N + 2 io_flush_timeouts() X: events_needed = N + 1 - (N + 2) // 0xffffffff events_got = 0 // not yet X isn't completed although the completions it was waiting for have happened, only its timer can end it now. And as the list is sorted and the walk ends at the first timeout that isn't due, it gets in the way of the ones behind it. The insertion sort has the same problem, it measures the distance of the pending targets from the current sequence. ->cq_last_tm_flush only needs to be brought up to date if no timeout is waiting for a sequence, as io_flush_timeouts() isn't called before the first one is set up. Otherwise it is current enough. Timeouts with a sequence come first in the list, so looking at the first entry will do. Use the last flush as the base for the insertion sort as well. Fixes: f010505b78a4 ("io_uring: flush timeouts that should already have expired") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-29-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 07aa50be5eee532cf2cd99675d04d33628a37aa0 Author: Josef Bacik Date: Thu Oct 15 19:30:45 2026 +0000 io_uring/poll: drop stale double poll entry on rearm Commit f2dbe87968a3aef74a11c025776d293b80964d3f upstream. A file that uses two wait queues for poll, e.g. a tty, gets a second io_poll entry, which IORING_OP_POLL_ADD keeps in ->async_data until the request is freed. io_poll_add() can run more than once for a request though: IORING_OP_POLL_REMOVE with one of the update flags disarms and rearms it, and io_poll_task_func() reissues it if a wake up turns out to be spurious. The second poll_wait() of the new round then finds *poll_ptr set, with ->head cleared by the disarm, and __io_queue_proc() fails what it takes for a third wait queue with -EINVAL. For an update that means that the poll request is completed with -ECANCELED, while the update itself reports success. For a spurious wake up, e.g. tcsetattr() on the polled tty, the poll request fails with -EINVAL. Free the old entry and clear the poll flags before arming, which is what io_arm_apoll() does for internal polling. All entries have been removed from their wait queues at that point. [ 6.6: no io_req_async_data_free(), open-coded ] Fixes: b69de288e913 ("io_uring: allow events and user_data update of running poll requests") Fixes: 6e5aedb9324a ("io_uring/poll: attempt request issue after racy poll wakeup") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-21-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 9f59721eddabcaa88ae612bf69e8d32b908e3eb6 Author: Josef Bacik Date: Thu Oct 15 19:30:44 2026 +0000 io_uring/wait: look at all CQ waiters on wake up Commit 356f92f2412686f822383b784fa102924407457a upstream. io_wake_function() returns -1 if the waiter it is called for doesn't have enough events yet, which makes __wake_up_common() stop walking the wait queue. That assumes that the waiters behind it can't be satisfied either. Each waiter has its own target though, computed from the min_complete it passed in: thread A: io_uring_enter(GETEVENTS, min_complete = 10) // queued first thread B: io_uring_enter(GETEVENTS, min_complete = 1) one CQE is posted: A isn't woken, and B isn't even considered B keeps sleeping with the event it asked for sitting in the CQ ring, until A's demand is met or a timeout or signal ends the wait. Return 0 to carry on with the next waiter. Only waiters whose condition is met are woken, like before. [ 6.6: io_wake_function() lives in io_uring/io_uring.c ] Fixes: bda521624e75 ("io_uring: make CQ ring wakeups be more efficient") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-20-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 9bb28e7740ce78beecafc5db074b45f4cbeb8a47 Author: Josef Bacik Date: Thu Oct 15 19:30:43 2026 +0000 io_uring: wake ring pollers for local task_work Commit b88902d8745a701d24275d012f0830e3628e2a22 upstream. With IORING_SETUP_DEFER_TASKRUN completions are queued as local work, and only become CQEs when the submitter enters the kernel to wait for events. For an application that finds out via poll() or epoll on the ring fd when it is time to do that, io_uring_poll() reports EPOLLIN if local work is pending. That only helps if the work is there at the time of the call. When DEFER_TASKRUN was added, io_req_local_work_add() did io_cqring_wake(), which took care of tasks sleeping in poll() as well. Then polling got a wait queue of its own, ->poll_wq, and the wake up in io_req_local_work_add() was replaced by waking the submitter directly. Since then ->poll_wq is only woken when CQEs are committed, which for such a ring is done by the very task that is waiting to be told to: submitter completion poll(ring_fd) io_uring_poll() // nothing yet schedule() io_req_local_work_add() // ->cq_wait_nr: nobody waits // sleeps on Wake ->poll_wq when the first entry is put on the work list. Like for the eventfd, that must not be done right away if the work is queued from a wake up handler, as the chain of wake ups could get back to the wait queue whose lock is held. Use an RCU callback in that case, with a reference to the ring. [ 6.6: io_req_local_work_add() lives in io_uring/io_uring.c, and with no IOU_F_TWQ_IN_WAKE to tell a wake up handler context apart, the ->poll_wq wake up is always deferred to an RCU callback ] Fixes: 130bd686d9be ("io_uring: waitqueue-less cq waiting") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-19-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit b23306ea31a0b8886a8b57a85ad5d4c6c81efdfc Author: Josef Bacik Date: Thu Oct 15 19:30:42 2026 +0000 io_uring/cancel: let CANCEL_ALL find parked requests Commit fe6ca13c98b1223f6005f32913ebd32e4df64b77 upstream. A cancellation with IORING_ASYNC_CANCEL_ALL or _ANY goes on until it finds nothing more. A request may stay where it was found for a while after it has been cancelled, so each one that matches is stamped with the sequence number of the cancellation, and is skipped from then on. io_cancel_cb() does so for io-wq work as well. There is no need to: pending work is taken off the list, and the workers are looked at once per call. And it does harm. A request that is run by io-wq may be parked while it still is the current work of the worker: poll gets armed for it, or it is put on ->futex_list or ->waitid_list. io-wq worker io_try_cancel() io_wq_submit_work() io_arm_poll_handler() io_poll_add_hash() io_async_cancel_one() io_cancel_cb() stamps the request sets IO_WQ_WORK_CANCEL = -EALREADY io_poll_cancel() skips the request = -ENOENT io_assign_current_work(NULL) The flag comes too late for the worker to see it, and the search that would have found the request takes it for done. The cancellation returns, and the request stays. With a multishot poll, IOSQE_ASYNC, and IORING_OP_ASYNC_CANCEL with IORING_ASYNC_CANCEL_ALL up to 63us later, that happens to 4 of 1,000 requests (4 CPUs, KVM). Take the stamp off again if the work matches. If the request is found on one of the lists it gets a new one, and io_cancel_cb() doesn't match it a second time. __io_async_cancel() tries the io-wq of the caller twice. So far the stamp has kept it from counting work that is running there the second time. Skip it instead, so that the number that is returned stays the same. Fixes: 8e29da69fead ("io_uring: add support for IORING_ASYNC_CANCEL_ALL") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-18-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit b22a4cdc0a90ca72abaabe088c0f78bbde912109 Author: Jens Axboe Date: Sun Jan 28 20:11:55 2024 -0700 io_uring/cancel: don't default to setting req->work.cancel_seq Commit 521223d7c229f83915619f888c99e952f24dc39f upstream. Just leave it unset by default, avoiding dipping into the last cacheline (which is otherwise untouched) for the fast path of using poll to drive networked traffic. Add a flag that tells us if the sequence is valid or not, and then we can defer actually assigning the flag and sequence until someone runs cancelations. [ 6.6: prerequisite for "io_uring/cancel: let CANCEL_ALL find parked requests". There is no free request flag bit here, so use the cancel_seq_set field that commit f4a1254f2a07 ("io_uring: fix cancellation overwriting req->flags") introduces upstream, which this also covers ] Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 8a9aa27d23e8d86cf98c415a0df9080dbec3da16 Author: Josef Bacik Date: Thu Oct 15 19:30:41 2026 +0000 io_uring/cancel: recognize "no timeout" on 32-bit Commit 3774e4d4c8533da2caae95556c4d635c7c4f45b8 upstream. IORING_REGISTER_SYNC_CANCEL waits without a limit if both fields of io_uring_sync_cancel_reg::timeout are -1. io_sync_cancel() compares them with -1UL. They are of type long long. With a long of 32 bits -1UL is 4294967295, which is what it stays when it is converted for the comparison, and the fields are never equal to it. So { -1, -1 } is taken for a timeout. ktime_set() takes the nanoseconds as an unsigned long, so what becomes of it is -1s + 4294967295ns = 3.29s. If the request is being run by io-wq and can't be interrupted, the call returns -ETIME after that time, rather than waiting for the request to be gone. On i386, with a buffered read from a null_blk device that takes 4s to complete a request, IOSQE_ASYNC, that is what each call does. Fixes: 78a861b94959 ("io_uring: add sync cancelation API through io_uring_register()") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-17-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 96aaafd7baa549b077256426c1001eeb8d14dc9e Author: Josef Bacik Date: Thu Oct 15 19:30:40 2026 +0000 io_uring/cancel: don't forget that the work was running Commit 8aa0e5db4845fb5ac11abe40d7b1cac0656c3ee3 upstream. If the request to be cancelled is being run by io-wq, io_async_cancel_one() flags the work, signals the worker and returns -EALREADY. Since commit ccbf726171b7 ("io_uring: perform poll removal even if async work removal is successful") io_try_cancel() goes on regardless, as poll may be armed for the request. If it isn't, and nothing else turns up, the result is the -ENOENT of the last search. __io_async_cancel() makes up for that. On -ENOENT it tries the io-wq of every task that uses the ring, and that of the caller is one of them. So the work is found a second time, and the result is -EALREADY after all. Unless the worker is done with it by then. If the work is flagged before io_wq_submit_work() looks at IO_WQ_WORK_CANCEL, all the worker does is to queue the request to be failed by task work. Then it isn't anywhere to be found until the task work has run, and - IORING_REGISTER_SYNC_CANCEL returns -ENOENT, - IORING_OP_ASYNC_CANCEL completes with -ENOENT, for a request that they have just cancelled, and that completes with -ECANCELED. With a read of an empty pipe, IOSQE_ASYNC, and a sync cancel right behind it, 1 to 3 of 1,000,000 calls return -ENOENT, and 50 to 110 with IORING_SETUP_DEFER_TASKRUN (4 CPUs, KVM). Nothing is written to the pipe, and all of these reads end with -ECANCELED. Remember that the work was found. IORING_OP_ASYNC_CANCEL completes with -EALREADY, as it does if the worker is a bit slower. For IORING_REGISTER_SYNC_CANCEL it means to try again, which ends with 0. The result of a linked timeout, which calls io_try_cancel() by itself, and the number that is returned for IORING_ASYNC_CANCEL_ALL and _ANY don't change. Fixes: ccbf726171b7 ("io_uring: perform poll removal even if async work removal is successful") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-16-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 39a503e0981c04c2fdb66d0cd23a737ee75b80ce Author: Josef Bacik Date: Thu Oct 15 19:30:38 2026 +0000 io_uring/poll: don't lose a cancel as io-wq arms poll Commit 6d2d4c2530e95ff6ddeb98195d49d99dbca14369 upstream. A request on a pollable file that was forced to io-wq is issued without blocking there. If that ends in -EAGAIN, io_wq_submit_work() arms poll for it and returns. It looks at IO_WQ_WORK_CANCEL once, before it issues the request. Somebody who wants to cancel the request in between finds it running: io-wq worker io_try_cancel() io_wq_submit_work() IO_WQ_WORK_CANCEL isn't set io_issue_sqe() = -EAGAIN io_async_cancel_one() sets IO_WQ_WORK_CANCEL signals the worker = -EALREADY io_poll_cancel() = -ENOENT ... = -ENOENT io_arm_poll_handler() = IO_APOLL_OK return Nobody looks at the flag again, and the signal doesn't matter to a worker that doesn't sleep. The request is armed as if nothing had happened: - a linked timeout completes with -ENOENT, and the request it was meant to limit waits for as long as it takes. - IORING_OP_ASYNC_CANCEL returns -EALREADY, and the request stays. - IORING_REGISTER_SYNC_CANCEL waits for the request to complete if it gets -EALREADY. Since commit 5623eb1ed035 ("io_uring/tctx: add separate lock for list of tctx's in ctx") it doesn't sleep but spins, so its next attempt finds the armed poll. The same goes for a multishot poll, recv or accept that is armed from io-wq. With a read of an empty pipe, IOSQE_ASYNC, and a linked timeout of 5ms or a cancel in the same submission, in a guest that is slow enough (TCG, KASAN), the request is lost in 21 of 24 rounds of 40 or 100 attempts. While it arms poll from io-wq, __io_arm_poll_handler() owns the request. Look at the flag once the request is in the hash table. The table is searched and the request is added with ->uring_lock held, and the flag is set before the search. So either the search finds the request, or it came first and the flag is seen. With the request marked as cancelled, the task work that is queued, right away or because ownership can't be released, fails it with -ECANCELED. What the canceller is told doesn't change. In this window a linked timeout still completes with -ENOENT rather than -ETIME, a cancel request with -EALREADY, and one with IORING_ASYNC_CANCEL_ALL or _ANY with a count that doesn't include the request. But the request is cancelled, so what is new is a request that completes with -ECANCELED after such a result. This doesn't help in two cases: - IORING_ASYNC_CANCEL_ALL and _ANY, if the work is flagged after the test added here, while io-wq still has it as the current work of the worker. io_cancel_cb() stamps it with the sequence of the cancel, so the search of the hash table on behalf of the same cancel takes it for done and skips it. - requests that are parked elsewhere by io-wq, like IORING_OP_FUTEX_WAIT and IORING_OP_WAITID. They have the same problem. [ 6.6: work->flags is not atomic here, the hash table has its own locks ] Fixes: 90fa02883f06 ("io_uring: implement async hybrid mode for pollable requests") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-14-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 8408964c14e53d1262d6b317521e304d71d4a3a2 Author: Josef Bacik Date: Thu Oct 15 19:30:37 2026 +0000 io_uring/io-wq: let cancel find picked up hashed work Commit e9efeb4fc97b0879512a3c3b995ed448f2487e12 upstream. io_get_next_work() takes all the work items that share a hash off the work list in one go, and the worker runs them one after the other. Only the one it is working on is visible as ->cur_work. The others are neither on the list nor current, so io_wq_cancel_cb() can't find them. IORING_OP_ASYNC_CANCEL and IORING_REGISTER_SYNC_CANCEL return -ENOENT for a request that has not even been started, e.g. a buffered write queued behind another write to the same file that is blocked, and the request is carried out. The cancellation done for a task or ring that goes away gets there in the end, as it keeps trying, but it has to wait for each item to become current. Keep a pointer to the remainder of the chain next to ->cur_work, and have io_wq_worker_cancel() look at it. The items on it belong to the worker, which needs ->lock to move on to the next one. Matching work is flagged with IO_WQ_WORK_CANCEL and fails with -ECANCELED when its turn comes. The worker isn't signalled for it, that would interrupt the unrelated work it is busy with. As the request isn't gone yet, it is reported like running work, with -EALREADY. [ 6.6: ->next_work was the item being picked up, which io_wq_worker_cancel() checked next to ->cur_work. Set ->cur_work in that window instead, as upstream does, and give ->next_work the new meaning. work->flags is not atomic here ] Fixes: 86f3cd1b589a ("io-wq: handle hashed writes in chains") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-13-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit b2cfc9fa4ec05e59912aa7d40c36eb7c5cb32184 Author: Josef Bacik Date: Thu Oct 15 19:30:36 2026 +0000 io_uring/io-wq: don't exit with a creation pending Commit e231d2e8f80d3649ecd3851b7f2abdfbe606c04b upstream. A worker that is the last one to go to sleep while work is pending asks for another worker. io_wq_dec_running() bumps ->nr_running on behalf of the new worker and queues create_worker_cb() as task_work for the owner of the io-wq. Until that has run, everybody else takes it that a worker is running which is going to look after the work list: io_wq_enqueue() doesn't create one, and other workers that go to sleep don't find themselves to be the last. If the worker that made the request exits, io_worker_exit() cancels the task_work, and io_worker_cancel_cb() drops ->nr_running without a look at the work list: worker A worker B io_wq_enqueue() blocks, work is pending nr_running++ queues create_worker_cb() wakes, handles the work idle timeout, decides to exit picks up work 1 queues work 2 B is on the free list still: wakes B work 1 blocks nr_running 2 -> 1 io_worker_exit() io_worker_cancel_cb() nr_running 1 -> 0 Work 2 has to wait for work 1, although there is room for more workers. It takes an owner that doesn't get around to run its task_work for the time of the idle timeout, less if the worker exits because its affinity was changed or the io-wq is marked exit-on-idle. Let the worker stay around until its request has been dealt with. Only the worker itself sets ->create_state, so it can't be set behind its back once it has decided to leave. [ 6.6: no exit-on-idle state ] Fixes: 1d5f5ea7cb7d ("io-wq: remove worker to owner tw dependency") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-12-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit d2a824548aedaa8c83fac7999cff414302e92983 Author: Josef Bacik Date: Thu Oct 15 19:30:35 2026 +0000 io_uring/io-wq: don't strand work when a worker exits Commit ad41f325be1271b22d99353819c90f0d5e45acc8 upstream. A worker exits if its idle timeout fired and it isn't the last one, if its affinity was changed, or if the wq is marked exit-on-idle. It decides so after it found the work list empty, and until io_worker_exit() is through it stays on the free list and in ->nr_running: worker io_wq_enqueue() io_acct_run_queue() == false queues work io_acct_activate_free_worker() wake_up_process(worker) // found one, nothing to create acct->nr_workers-- break io_worker_exit() Nobody is going to look at the work. If other workers exist, it has to wait until one of them finishes what it is blocked on or hits its idle timeout. If not, which is possible for the affinity and the exit-on-idle case, it sits there until something else is queued. For exit-on-idle it takes a task that closes its last ring and sets up a new one while the workers are on their way out. Make the worker take itself off the free list when it gives up its ->nr_workers slot, then leave ->nr_running, and only then take the final look at the work list. That look and queueing work are both done under acct->lock, so either the worker sees the work and stays, or the enqueue side sees that the worker is gone and wakes or creates another one. If it wants to stay and finds that its slot has been taken, a worker has been created in its place, which is going to look at the work list, and it can leave after all. [ 6.6: no exit-on-idle state, ->nr_workers and the free list are under wq->lock ] Fixes: 38aa434ab933 ("io_uring/io-wq: add exit-on-idle state") Fixes: 05c5f4ee4da7 ("io-wq: get rid of FIXED worker flag") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-11-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 2c75ebae8a7f09c99e31c7042b7d4d595f03b2b1 Author: Josef Bacik Date: Thu Oct 15 19:30:30 2026 +0000 io_uring: don't flood a cancelling task with task_work Commit 22e643e61b9b6299b42ff7d88bab48bccada8a5d upstream. io_ring_exit_work() asks each task which has used the ring to remove its tctx node, by task_work, and repeats that until the list is empty. io_tctx_exit_cb() doesn't touch the node while the task is in io_uring_cancel_generic(), which removes all the nodes at its end. So the work item queues the callback again as soon as it has completed, for nothing. That is more than a waste of time. task_work_run() only returns when it finds the list empty. If the rings are released from inside the cancellation, because requests of other rings held the last references to their files, up to 64 work items keep sending callbacks to the one task which is running them. It never finds the list empty, never gets back to the cancellation, the nodes stay, and so it goes on: a task with 60 pairs of rings which poll each other ran 280000 callbacks in 5 seconds, 20 seconds after exit_group(). It ends when all the senders happen to be late at the same time. Until then the task keeps a CPU and the work items busy. An exiting task can't be killed meanwhile. execve() cancels the requests in the same way, so a live task can get stuck there as well, for minutes. If it takes more than five, the work items run into the WARN_ON_ONCE(time_after(jiffies, timeout)) of io_ring_exit_work(). No privilege is needed for any of this. If the callback has met a task in cancellation, wait a little before it is sent again. Nobody has to wake the work item up for that: either the node is gone by then, or it is the turn of the next round. Fixes: d56d938b4bef ("io_uring: do ctx initiated file note removal") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-6-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit d39ebc7a583d650b1d6da9b45e2ce96ad4d877e4 Author: Josef Bacik Date: Thu Oct 15 19:30:29 2026 +0000 io_uring/io-wq: don't hide a link from cancellations Commit 436d48a2ed13112d2d27085325838e5bce6b4507 upstream. A task that exits cancels its tracked requests and waits until they are gone. io_uring_cancel_generic() looks everywhere a request can be, and goes to sleep if it found nothing to cancel. It is woken up each time one of the requests of the task is completed by task work or freed. When io-wq is done with a request that has a link, there is a time in which the next request of the link can't be found: io_worker_handle_work() io_assign_current_work(worker, NULL) io_wq_free_work(work) io_req_find_next() // takes the link off the request io_free_req() // task work for the task io_assign_current_work(worker, linked) io_run_task_work() cond_resched() worker->cur_work = linked It is not pending, it is not the current work of a worker, and it is not yet on the list that it is about to be parked on. If the pass that the exiting task makes because of io_free_req() falls into that time, it finds nothing and the task goes to sleep. The worker then runs the link, which IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request nothing is completed or freed, and nobody wakes up the task. If it is the process that exits it can't be killed any more either. NOP, IOSQE_ASYNC | IOSQE_IO_LINK FUTEX_WAIT, FUTEX2_PRIVATE exit of the thread, or of the process, up to 63us later With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM): io_uring_cancel_generic do_exit Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about the same gap, and makes the task look again for whatever happens before io_free_req(). Free the request once the link is the current work of the worker, or pending. Whoever is woken up by that can find the link, until it is parked where cancellations look as well. To do so split io_wq_free_work() in two. [ 6.6: io-wq takes callbacks, split the free_work one into put_work and free_work, and keep io_wq_put_work() finding the next link the way io_wq_free_work() did here ] Fixes: 768134d4f481 ("io_uring: don't do flush cancel under inflight_lock") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-5-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 08c42055b8f9a5d29236d34ad4bce08828239fe1 Author: Josef Bacik Date: Thu Oct 15 19:30:28 2026 +0000 io_uring/io-wq: don't lose the signal that ends work Commit 63c103279a95e82280092f2f4232e91e8117a252 upstream. When a thread exits, only its tracked requests are cancelled. Then its io-wq is torn down. io_wq_exit_workers() signals every worker, to get it out of an interruptible sleep, and waits for all of them to exit. Before they do, they go through the work that is left. Unbounded work is cancelled. Bounded work is run, as it is expected to end by itself. Not all of it does. An open has no file yet, so it counts as bounded, and the open of a FIFO waits for the other end. That is what the signal is for. But the workers are signalled once, and a worker that hasn't started the work by then loses the signal: io_wq_exit_workers() io_worker_handle_work() io_wq_worker_wake() set TIF_NOTIFY_SIGNAL io_assign_current_work() io_run_task_work() clear TIF_NOTIFY_SIGNAL io_wq_submit_work() fifo_open() wait_for_partner() wait_for_completion_timeout() The thread never gets out of do_exit(): IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC exit of the thread that has submitted it hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is killed. Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT set. The bit is set before the workers are signalled, and it is tested after the flag has been cleared, with clear_notify_signal() providing the barrier. So either the flag stays, or the bit is seen. Work that is started while the io-wq exits is treated like work that is being run at that time: it isn't interrupted unless it waits interruptibly. [ 6.6: work->flags is not atomic here ] Fixes: afcc4015d1bf ("io-wq: provide an io_wq_put_and_exit() helper") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-4-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit bf1d2ed84b3162e3b0e0bb7018ac59147da6e975 Author: Josef Bacik Date: Thu Oct 15 19:30:27 2026 +0000 io_uring/wait: don't spin on a stuck overflow list Commit 34f5a664c34d3cb62f6bec7f4156754594a7d25b upstream. As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule() returns right away, before it gets to look at signals or arms the timeout, for io_cqring_wait() to flush the overflow list. If that doesn't empty the list, and the CQ ring doesn't hold the number of events the caller wants, the loop starts over, with the same result. The task spins in the kernel, and can't be killed. The assumption is that this can't happen: if CQEs can't be flushed, the ring is full, and min_events is capped to the size of the ring. But: - With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It is stuck on the list if a single one is free, and then the ring holds less than cq_entries events. A single threaded application that asks for as many events as the ring has entries never gets out of io_uring_enter(). - Whether the ring is full is up to the CQ head, which the application can write to. While one thread waits for events on an empty ring, another one can move the head back so that the ring looks full and have a CQE overflow. The waiter can't be stopped any more, not even by SIGKILL. Only the application can make room in the CQ ring. Return to it if the list could not be flushed. [ 6.6: io_cqring_wait() lives in io_uring/io_uring.c ] Fixes: 3fcf19d592d5 ("io_uring: parse check_cq out of wq waiting") Assisted-by: LLM Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261015-b4-io-uring-fixes-v1-3-c1556f5d7bf5@toxicpanda.com Signed-off-by: Jens Axboe Co-Authored-By: Claude Fable 5.1 Signed-off-by: Greg Kroah-Hartman commit 1432d881d99584105122760133caeff1dce7a9f7 Author: Christian Brauner Date: Mon Sep 21 15:44:53 2026 +0200 io-wq: order the exit bit against worker creation task work Commit 0e5663856b69219ef2f02e04bac9f5c5be19718a upstream. io_wq_exit_workers() cancels task work for queued worker creation with task_work_cancel_match(). That has a plain load of task->task_works. io_queue_worker_create() adds the new entry and tests IO_WQ_BIT_EXIT to cancel it if the workqueue is already on its way out. That must be ordered. task_work_add() has a full barrier via cmpxchg(). But io_wq_exit_start() sets the bit with set_bit() which doesn't have any memory ordering. So afaict, on weakly ordered architectures the exiting task may load task_works before the store of the bit is visible. The other side tests the bit before the store is visible as well. So the entry remains queued with worker_refs and the exiting task waits on worker_done indefinitely. If the task still has rings then io_uring_del_tctx_node() provides the barrier via test_and_set_bit() in io_wq_set_exit_on_idle(). When it has closed all rings though that barrier is gone. Add the barrier after the set_bit(). Fixes: 71a85387546e ("io-wq: check for wq exit after adding new worker task_work") Cc: stable@vger.kernel.org Reviewed-by: Jens Axboe Acked-by: Oleg Nesterov Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-4-8e4adb1619e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 4472579bd1c83708b6fe623c870cdf728e947205 Author: Lee Jones Date: Mon Oct 19 12:07:29 2026 +0000 tracing/histograms: Verify event_call identity when updating synth_event refcount commit 3403d9bb27ebc3572bd048620746b4414e073bf9 upstream. In event_hist_trigger_parse() and hist_unreg_all(), the histogram registration and unregistration paths look up find_synth_event() using trace_event_name(file->event_call) and adjust se->ref if a match is found. Because find_synth_event() only compares the event basename, registering or removing a histogram on a non-synthetic trace event whose basename matches a synthetic event erroneously modifies the synthetic event's reference count. If a histogram is registered on the non-synthetic event before the synthetic event is created and removed afterwards, se->ref is decremented without a matching increment, allowing the synthetic event to be freed while an active histogram action still holds a pointer to it. Introduce find_synth_event_call() to verify that &se->call matches file->event_call before adjusting se->ref. Fixes: 4b147936fa50 ("tracing: Add support for 'synthetic' events") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261019120730.2342739-1-lee@kernel.org Signed-off-by: Lee Jones Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 584701bf9b7a0cbb5fe20087a2885112ed0b552c Author: Donggeun Yoo Date: Thu Sep 17 10:55:32 2026 +0900 tracing: Fix 64-bit and signed histogram fields on 32-bit kernels commit 443d23176812803d0fa182b8d05ef066a7b8271f upstream. DEFINE_HIST_FIELD_FN() reads a trace event field and widens it to the u64 the histogram uses as a key or a value: type *addr = (type *)(event + hist_field->field->offset); return (u64)(unsigned long)*addr; unsigned long is 32 bits on a 32-bit kernel, so the intermediate cast discards the upper half of a 64-bit field, and widens a signed field by zero extension from 32 bits rather than sign extension from its own width. Five of the eight instantiations are wrong there: s64, u64, s32, s16 and s8. The cast came in with commit 79e577cbce4c ("tracing: Support string type key properly"), which also added hist_field_dynstring() and hist_field_pstring(). Those convert a char * to u64 and do warn without an unsigned long in between on 32-bit. DEFINE_HIST_FIELD_FN() converts an integer and never a pointer, so it gains nothing from the cast and only loses information. Drop the intermediate cast and let the usual arithmetic conversions widen *addr according to its own type. unsigned long is 64 bits on LP64, so the two forms are identical there and 64-bit kernels are unaffected. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260917015532.103081-1-donggeunyoo.kernel@gmail.com Fixes: 79e577cbce4c ("tracing: Support string type key properly") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/all/20260914054614.82A9B1F000FF@smtp.kernel.org/ Signed-off-by: Donggeun Yoo Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit aae0ccd7326eef78dcdefffef3d1253e6f0615ca Author: Donggeun Yoo Date: Mon Sep 14 19:40:36 2026 +0900 tracing: Unregister field variable histograms when the command fails commit 91c14d6c13096091c56304120aaa26e479130b8b upstream. An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260914104036.1768529-1-donggeunyoo.kernel@gmail.com Fixes: 02205a6752f2 ("tracing: Add support for 'field variables'") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/all/20260913204302.DB2551F000FF@smtp.kernel.org/ Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 8b307d64a60548e4a74cb746f74d7ed4bd49965e Author: Donggeun Yoo Date: Tue Sep 15 08:47:54 2026 +0900 tracing: Save the event file instead of the compatible histogram commit d5c42664fc094899af9aae5300b27fe8fdb658ef upstream. create_field_var_hist() creates a histogram on the matched event to supply a field variable, and records it on the target so it can be torn down later: hist_data = find_compatible_hist(target_hist_data, file); ... /* Save the compatible histogram information */ var_hist->hist_data = hist_data; hist_data is not the histogram it creates. It is one that was already there, whose keys the new one copies. The saved pointer has a single user, unregister_field_var_hists(), which runs when the target is removed: file = hist_data->field_var_hists[i]->hist_data->event_file; find_compatible_hist() matches on keys alone, so it can pick one with no variables of its own. check_var_refs() then returns false and the user can remove it while the target still points at it: BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320 Read of size 8 at addr ffff8880093b90e0 by task init/1 Freed by task 1: kfree+0x154/0x420 event_hist_trigger_free+0x1d5/0x320 event_hist_trigger_parse+0x35f3/0x69e0 trigger_process_regex+0x1a6/0x250 Save the event file instead. It is all the dereference ever wanted, and it does not go away when the user removes a trigger. Cc: stable@vger.kernel.org Reported-by: Sashiko Link: https://lore.kernel.org/all/20260914110753.221E61F000FF@smtp.kernel.org/ Link: https://patch.msgid.link/20260914234754.3676905-1-donggeunyoo.kernel@gmail.com Fixes: 02205a6752f2 ("tracing: Add support for 'field variables'") Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Acked-by: Tom Zanussi Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit b205ff58e02922ac324f931cf9eb238a3acdb048 Author: Kyle Zeng Date: Fri Oct 23 10:46:20 2026 -0700 tracing: Reject incomplete event filter expressions commit 1fdc4164e488916402badddbb1f51e9380dabb91 upstream. A non-empty expression normally finishes in predicate_parse()'s inner loop, which resolves the pending logical operators before jumping to finalization. If the input ends after an operator, possibly followed by unary '!' tokens, the outer loop instead falls through with unresolved operator state. For example, "common_pid == 1 || common_pid == 2 &&" leaves prog[0].target equal to -1. The second pass then reads prog[-1] before the forward-jump check can reject it. Depending on adjacent slab contents, it can also copy an out-of-bounds word into a branch target that passes the forward-only check. A self-targeted perf tracepoint counting event can reach this path through PERF_EVENT_IOC_SET_FILTER. Reject the outer-loop fallthrough when a predicate has already been parsed. This ensures that non-empty expressions only reach finalization after the inner loop has resolved their operators. Keep the existing no-filter error for input that has no predicates. Add a regression test for trailing logical operators and unary negations. Fixes: 80765597bc587 ("tracing: Rewrite filter logic to be simpler and faster") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261023174620.91969-1-kylebot@openai.com Assisted-by: Codex:gpt-6-astra Acked-by: Masami Hiramatsu (Google) Tested-by: JongHyuk Kim(MalHyuk) Signed-off-by: Kyle Zeng Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit fabaff1c59ff2cc89cb7e5bd0186a5e15f0c73b2 Author: Pauli Virtanen Date: Wed Sep 2 00:04:36 2026 +0300 Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn [ Upstream commit 86b55991d3cd690e73c5ef8d20b75ae4905b357a ] l2cap_chan may be linked to l2cap_conn at most once. This is assumed in several places, eg l2cap_chan_del cleanup. There is a TOCTOU race where the invariant is violated: [Task 1] [Task 2] l2cap_chan_connect l2cap_sock_bind l2cap_chan_lock lock_sock l2cap_state_change if (sk->sk_state != BT_OPEN) chan->state = BT_CONNECT l2cap_sock_state_change_cb chan->state = BT_BOUND sk->sk_state = BT_BOUND lock_sock <------------------ release_sock sk->sk_state = BT_CONNECT l2cap_sock_connect() does not check sk->sk_state, so since chan->state is now BT_BOUND, subsequent connect() ends up with second __l2cap_chan_add. Explicitly document and check the invariant in __l2cap_chan_add with WARN_ON_ONCE. The only callsite where it could be hit is l2cap_chan_connect, so add pre-check there to avoid relying on chan->state. chan->state read/write is not properly guarded currently so there can be other TOCTOUC problems. Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. Fixes: b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") Assisted-by: deepseek-4-flash # finding the race condition Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 7aaaca01a3f8e0e08229a8b352caa3ae772b1634 Author: Jonas Köppeler Date: Mon Mar 23 18:49:20 2026 +0100 net_sched: codel: fix stale state for empty flows in fq_codel [ Upstream commit 815980fe6dbb01ad4007e8b260a45617f598b76d ] When codel_dequeue() finds an empty queue, it resets vars->dropping but does not reset vars->first_above_time. The reference CoDel algorithm (Nichols & Jacobson, ACM Queue 2012) resets both: dodeque_result codel_queue_t::dodeque(time_t now) { ... if (r.p == NULL) { first_above_time = 0; // <-- Linux omits this } ... } Note that codel_should_drop() does reset first_above_time when called with a NULL skb, but codel_dequeue() returns early before ever calling codel_should_drop() in the empty-queue case. The post-drop code paths do reach codel_should_drop(NULL) and correctly reset the timer, so a dropped packet breaks the cycle -- but the next delivered packet re-arms first_above_time and the cycle repeats. For sparse flows such as ICMP ping (one packet every 200ms-1s), the first packet arms first_above_time, the flow goes empty, and the second packet arrives after the interval has elapsed and gets dropped. The pattern repeats, producing sustained loss on flows that are not actually congested. Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms target), ping at 5 pps under UDP flood: Before fix: 26% ping packet loss After fix: 0% ping packet loss Fix by resetting first_above_time to zero in the empty-queue path of codel_dequeue(), matching the reference algorithm. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Fixes: d068ca2ae2e6 ("codel: split into multiple files") Co-developed-by: Jesper Dangaard Brouer Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Jonas Köppeler Reported-by: Chris Arges Tested-by: Jonas Köppeler Reviewed-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/ Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 95b887e3d4d7ab2c44354cb2fffccd1dbec48816 Author: Sasha Levin Date: Mon Oct 26 17:14:27 2026 -0400 Revert "srcu: Use irq_work to start GP in tiny SRCU" This reverts commit 20b98d9ffb09763048a7c84b47403eb0f177272c. Reported-by: Guenter Roeck Link: https://lore.kernel.org/r/49da816c-8082-46f1-bb12-f0d6187bb06a@roeck-us.net Signed-off-by: Sasha Levin commit 7192633a23d6bd93f29b1a7435ef782eacf7feca Author: Hangbin Liu Date: Wed Mar 4 15:13:53 2026 +0800 bonding: do not set usable_slaves for broadcast mode [ Upstream commit 45fc134bcfadde456639c1b1e206e6918d69a553 ] After commit e0caeb24f538 ("net: bonding: update the slave array for broadcast mode"), broadcast mode will also set all_slaves and usable_slaves during bond_enslave(). But if we also set updelay, during enslave, the slave init state will be BOND_LINK_BACK. And later bond_update_slave_arr() will alloc usable_slaves but add nothing. This will cause bond_miimon_inspect() to have ignore_updelay always true. So the updelay will be always ignored. e.g. [ 6.498368] bond0: (slave veth2): link status definitely down, disabling slave [ 7.536371] bond0: (slave veth2): link status up, enabling it in 0 ms [ 7.536402] bond0: (slave veth2): link status definitely up, 10000 Mbps full duplex To fix it, we can either always call bond_update_slave_arr() on every place when link changes. Or, let's just not set usable_slaves for broadcast mode. Fixes: e0caeb24f538 ("net: bonding: update the slave array for broadcast mode") Reported-by: Liang Li Signed-off-by: Hangbin Liu Link: https://patch.msgid.link/20260304-b4-bond_updelay-v1-1-f72eb2e454d0@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 863303ad4caacd3b280bb9a1d548a88ae91e5446 Author: Tonghao Zhang Date: Thu Oct 16 20:51:36 2025 +0800 net: bonding: update the slave array for broadcast mode [ Upstream commit e0caeb24f538c3c9c94f471882ceeb43d9dc2739 ] This patch fixes ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad"). Before this commit, on the broadcast mode, all devices were traversed using the bond_for_each_slave_rcu. This patch supports traversing devices by using all_slaves. Therefore, we need to update the slave array when enslave or release slave. Fixes: ce7a381697cb ("net: bonding: add broadcast_neighbor option for 802.3ad") Cc: Simon Horman Cc: Jonathan Corbet Cc: Andrew Lunn Cc: Reported-by: Jiri Slaby Tested-by: Jiri Slaby Link: https://lore.kernel.org/all/a97e6e1e-81bc-4a79-8352-9e4794b0d2ca@kernel.org/ Signed-off-by: Tonghao Zhang Reviewed-by: Hangbin Liu Reviewed-by: Nikolay Aleksandrov Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20251016125136.16568-1-tonghao@bamaicloud.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 83b2e511cf9ba22904b167e00fcbd85169b50b2c Author: Yun Zhou Date: Thu Oct 22 10:49:30 2026 -0400 xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf [ Upstream commit 41a28c865d1d5843f8cb9e0af17a8f4d9e2961ff ] xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. Fixes: f7664b31975b ("xfs: implement online get/set fs label") Reported-by: syzbot+837bcd54843dd6262f2f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=837bcd54843dd6262f2f Cc: stable@vger.kernel.org Signed-off-by: Yun Zhou Reviewed-by: Christoph Hellwig Signed-off-by: Carlos Maiolino [ sashal: Omitted realtime superblock changes because the existing code lacks realtime superblock support. ] Signed-off-by: Sasha Levin commit ad33433131ebce8d0ad66c2502e5c090c16ef927 Author: Frank Sorenson Date: Thu Oct 22 11:14:17 2026 -0400 cifs: add revalidation on FSCTL failure in smb2_duplicate_extents() [ Upstream commit 53676a5e28231186c9f56d87b7998b640699bc15 ] smb2_duplicate_extents() has no handling for FSCTL_DUPLICATE_EXTENTS_TO_FILE failure: when the FSCTL fails, local inode metadata may be stale from the pre-extension or from concurrent remote writes, but is never refreshed. Force revalidation on FSCTL failure and use i_size_read() for the pre-extension check. Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Signed-off-by: Paulo Alcantara [ sashal: Made the failure check standalone because the existing code lacks the SMB2_query_info() success branch. ] Signed-off-by: Sasha Levin commit bbc154a7da4e075aef720ef051aff6094400eb66 Author: Ben Cressey Date: Thu Oct 22 10:22:24 2026 -0400 dm-integrity: fix infinite loop on discard with large tag size [ Upstream commit 18d80c77b4c7dd20699e81cedfbbff4e9d198f28 ] When integrity_metadata handles a discard, it fills a buffer with DISCARD_FILLER and writes it over the tags, max_blocks blocks at a time. If the kmalloc fails, the buffer is the on-stack array checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size is never decremented and the loop never terminates. Fix this by using sizeof(checksums_onstack) as max_size. The array has MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size"), so max_blocks is at least 1. Fixes: 84597a44a9d8 ("dm integrity: add optional discard support") Cc: stable@vger.kernel.org Reviewed-by: Jose Fernandez (Anthropic) Signed-off-by: Ben Cressey Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka [ sashal: Adjusted context for the absence of keyed-discard support. ] Signed-off-by: Sasha Levin commit e265221019d20fa162b62baec16c44b5b2ea295b Author: Jesse Zhang Date: Thu Oct 22 11:14:35 2026 -0400 drm/amdgpu: free the userptr ranges when a CS fails after parser_bos [ Upstream commit 1b4da805a0ba354a549ce07459c871c17dd94fe0 ] amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of the BO list and looks up the user pages. Those ranges are only freed when amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks them under the notifier lock. If amdgpu_cs_patch_jobs(), amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of amdgpu_cs_submit() fails, nothing frees them: neither amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e->range. Each such CS then leaks the range, its hmm_pfns array (8 bytes per page of the userptr BO) and the BO reference the range holds. An IB on a ring that patches the CS in place (e.g. VCN) with an unmapped va_start fails in amdgpu_cs_patch_ibs() and takes this path. Free the ranges on those error paths. Ranges amdgpu_cs_submit() already dropped are NULL, so freeing them again is a no-op. Fixes: fec8fdb54e8f ("drm/amdgpu: fix userptr HMM range handling v2") Reviewed-by: Alex Deucher Signed-off-by: Jesse Zhang Signed-off-by: Alex Deucher (cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267) Cc: stable@vger.kernel.org [ sashal: adapted cleanup to the existing error_backoff path using amdgpu_ttm_tt_get_user_pages_done() ] Signed-off-by: Sasha Levin commit 4589ad76a6b1011538600ad398baf0b7d73a1252 Author: Dibin Moolakadan Subrahmanian Date: Thu Oct 22 09:43:01 2026 -0400 drm/i915/dmc: Harden DMC firmware payload parsing [ Upstream commit 8bb1858db453cd4250e3b633f5d2d09206024ca6 ] Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.") Cc: stable@vger.kernel.org Assisted-by: Claude-Code:Sonnet-5 Signed-off-by: Dibin Moolakadan Subrahmanian Reviewed-by: Mitul Golani Signed-off-by: Ankit Nautiyal Link: https://patch.msgid.link/20260922133535.3180973-5-dibin.moolakadan.subrahmanian@intel.com (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) Signed-off-by: Joonas Lahtinen [ sashal: Changed drm_err() calls to use &i915->drm instead of display->drm. ] Signed-off-by: Sasha Levin commit 0c133ed51700036796318f038dde813976bf1227 Author: Jann Horn Date: Wed Oct 21 21:30:31 2026 -0400 futex: Fix mm reuse handling for FUT_OFF_MMSHARED [ Upstream commit 3267512ad1c2cc0c7768c5b014dc2cceb398a801 ] A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) Fixes: 222993395ed3 ("futex: Remove pointless mmgrap() + mmdrop()") Closes: https://lore.kernel.org/r/CAG48ez0dLBpc3QtbAhMMVNHwHL94iHh2G+h-=BVFR4dDuzZr1g@mail.gmail.com/ Signed-off-by: Jann Horn Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/20260929-futex-mmshared-fix-v1-1-262b1ffeb3d0@google.com Cc: stable@vger.kernel.org [ sashal: adapted futex ID handling to direct mm_struct storage initialized by mm_init() because the dedicated per-MM futex infrastructure is absent. ] Signed-off-by: Sasha Levin commit 9504c8b6644f3c8799206c2e2840260bd416f341 Author: Wentao Liang Date: Wed Oct 21 21:30:09 2026 -0400 i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() [ Upstream commit aaabefc79b0ff0018e8e3832169bbe359d0551fc ] In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released. Fixes: 560746eb79d3 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20260916070631.1965713-1-vulab@iscas.ac.cn [ sashal: adapted the change to the unrefactored driver using i2c_dev instead of i2c. ] Signed-off-by: Sasha Levin commit 0254b2ffc62760325fc2e2a2e3d6d95603a9ac4f Author: David Carlier Date: Sat Oct 24 17:49:49 2026 +0800 gtp: disable BH before calling udp_tunnel_xmit_skb() [ Upstream commit 5638504a2aa9e1b9d72af9060df1a160cce2d379 ] gtp_genl_send_echo_req() runs as a generic netlink doit handler in process context with BH not disabled. It calls udp_tunnel_xmit_skb(), which eventually invokes iptunnel_xmit() — that uses __this_cpu_inc/dec on softnet_data.xmit.recursion to track the tunnel xmit recursion level. Without local_bh_disable(), the task may migrate between dev_xmit_recursion_inc() and dev_xmit_recursion_dec(), breaking the per-CPU counter pairing. The result is stale or negative recursion levels that can later produce false-positive SKB_DROP_REASON_RECURSION_LIMIT drops on either CPU. The other udp_tunnel_xmit_skb() call sites in gtp.c are unaffected: the data path runs under ndo_start_xmit and the echo response handlers run from the UDP encap rx softirq, both with BH already disabled. Fix it by disabling BH around the udp_tunnel_xmit_skb() call, mirroring commit 2cd7e6971fc2 ("sctp: disable BH before calling udp_tunnel_xmit_skb()"). Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Link: https://patch.msgid.link/20260417055408.4667-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski [ Ting-Han: this tree does not have commit e3411e326fa4 ("net: ipv4: Add a flags argument to iptunnel_xmit(), udp_tunnel_xmit_skb()") or commit 1bec9d0c0046 ("ipv4: Convert ->flowi4_tos to dscp_t."), so the udp_tunnel_xmit_skb() call differs in context; the change is the same ] Assisted-by: LLM Signed-off-by: Ting-Han Hou Signed-off-by: Sasha Levin commit 0cf0ff2f728f2a1434c56c0bcf267fe230abf124 Author: Ido Schimmel Date: Thu Oct 22 15:27:23 2026 -0400 ipv4: udp: Create exceptions before socket matching [ Upstream commit 4c3499f79f8c7e8561266bcc220a18538cec0458 ] Currently, when ICMP Fragmentation Needed and Redirect Message packets are locally delivered and quote a UDP packet, a FIB nexthop exception (FNHE) is only created if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the FNHE cache in order to discover the ephemeral port used by a connected UDP socket. Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the FNHE cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating a FNHE, even before trying to find a matching socket. Do that by calling ipv4_update_pmtu() and ipv4_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in a FNHE being created or updated in the cache that the attacker can observe. Pass an oif of 0, in a similar fashion to icmp_err(). This is also the oif used by the socket path for sockets that are not bound to a device. Note that this does not allow attackers to create FNHEs that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMP error that quotes an ICMP Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ipv4_sk_update_pmtu() / ipv4_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the FNHE cache of the nexthop resolved by the no socket helpers and another in the FNHE cache of the nexthop used by the socket. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Cc: stable@vger.kernel.org Reported-by: Amit Klein Reported-by: Noam Caspi Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Link: https://patch.msgid.link/20260828192344.2596928-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski [ sashal: inlined udp_err_update_exception() into the existing udp_err() wrapper ] Signed-off-by: Sasha Levin commit f77fb90edca5385d0eecbfd6d2c8ef60afff24a9 Author: Daehyeon Ko <4ncienth@gmail.com> Date: Thu Oct 22 13:23:15 2026 -0400 vsock/virtio: validate packet source for connected sockets [ Upstream commit dee44f41f206becb41c492899c1996cfd7f82a1b ] virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets are generated internally with VMADDR_CID_LOCAL as their source, including connections using CID aliases. Use the helper after lock_sock() in the virtio receive path. Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Closes: https://lore.kernel.org/netdev/20260813121236.2328599-1-4ncienth@gmail.com/ Cc: stable@vger.kernel.org Suggested-by: Stefano Garzarella Reviewed-by: Bobby Eshleman Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Link: https://patch.msgid.link/20260826003929.966160-2-4ncienth@gmail.com Signed-off-by: Jakub Kicinski [ sashal: adjusted context for vsock lookup and reset helpers without network namespace arguments ] Signed-off-by: Sasha Levin commit 64e196a6d7173667a2a0fe2f191bc64eecd07778 Author: Cen Zhang (Microsoft Security FORGE Labs) Date: Thu Oct 22 10:53:38 2026 -0400 io_uring/cancel: don't spin on local work the task can't run [ Upstream commit fddcf4c5321b3ea5f72166c3fd36a9d1c34f80c7 ] io_uring_cancel_generic() refuses to sleep while any ring on the exiting task's tctx has local work pending. It assumes the task is that ring's submitter and that the next io_uring_try_cancel_requests() pass will run the work. This does not hold for a ring that was still IORING_SETUP_R_DISABLED when the task got its tctx node from io_uring_create() or io_ringfd_register(). The submitter is set later by IORING_REGISTER_ENABLE_RINGS, possibly from another task, and only the submitter may run local work on an IORING_SETUP_DEFER_TASKRUN ring. To the exiting task the work stays pending forever, the loop never reaches schedule(), and the task trips the WARN_ON_ONCE() once and then spins in do_exit(). An unprivileged user can set this up at will by creating a disabled ring, having a child enable it and stop, posting to the ring with IORING_OP_MSG_RING and exiting with a request in flight that only the child can complete. The exiting thread burns a CPU until the child runs or dies, and with panic_on_warn set the WARN panics the kernel. Fix by skipping the sleep only when io_allowed_defer_tw_run() allows the task to run the work. This is reasonable since work it cannot run cannot complete any of its requests either, so nothing is lost by sleeping. Drop the WARN_ON_ONCE() since handing a disabled ring to another thread is a supported scenario, not a bug state. Fixes: 360cd42c4e95 ("io_uring: optimise io_req_local_work_add") Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Cen Zhang (Microsoft Security FORGE Labs) Link: https://patch.msgid.link/20261008191602.45101-1-cenzhang@linux.microsoft.com Signed-off-by: Jens Axboe [ sashal: replaced io_local_work_pending() with a direct !llist_empty() check on work_llist ] Signed-off-by: Sasha Levin commit 762ffd4a8daff02fd2eea779f9b6d432ef0006f7 Author: Chen Cheng Date: Thu Oct 22 10:49:24 2026 -0400 dm-integrity: require stable writes for internal hash modes [ Upstream commit b2fd92f016e9d692fd3c8c08d0ee014e9212279d ] dm-integrity direct, bitmap and inline internal-hash modes compute integrity tags from the pages carried by the write bio. The lower data write also uses those pages, so the tag and the data write depend on the same memory contents staying unchanged while writeback is in flight. Without stable writes, a buffered writer can modify a writeback folio after dm-integrity has submitted the data bio and before the lower device has consumed the data. After a crash, this can leave data from the later contents with a tag calculated from the earlier contents, causing permanent checksum failures on read. Set BLK_FEAT_STABLE_WRITES for internal-hash D, B and I modes so filesystems wait for writeback folios to become stable before modifying them again. Journal mode is left unchanged because it copies data into the journal before computing and persisting the tag. Tested using dm-delay over a virtio-blk test disk, dm-integrity internal_hash:crc32c and no-journal ext4. The D and B reproducers both failed with checksum errors before this change and completed with READ_RC=0 and zero mismatches after it. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org Reported-by: Sun Yangkai Link: https://github.com/chencheng-fnnas/reproducer/blob/main/dm-integrity-writeback-race.py Signed-off-by: Chen Cheng Signed-off-by: Mikulas Patocka [ sashal: adapted BLK_FEAT_STABLE_WRITES to QUEUE_FLAG_STABLE_WRITES using a new needs_stable_writes target bit. ] Signed-off-by: Sasha Levin commit f4fcbae8b27350565026807e77c96541d9e7a349 Author: Taeyang Lee <0wn@theori.io> Date: Thu Oct 22 10:09:03 2026 -0400 tracing: Keep the predicate limit separate from program capacity [ Upstream commit 803aa6fc2dbea25ab9d3ed19eca1c96d0ab17445 ] predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit. Cc: stable@vger.kernel.org Fixes: 39f7c41c908b ("tracing/filters: Enable filtering a cpumask field by another cpumask") Link: https://patch.msgid.link/atELCd1XjKVhrkFL@Taeyangs-MacBook-Pro.local Signed-off-by: Taeyang Lee <0wn@theori.io> Signed-off-by: Steven Rostedt [ sashal: Adapted kzalloc_objs() allocation to kcalloc(). ] Signed-off-by: Sasha Levin commit ef9342fa7433643f54de19b980e2aac0fae7201c Author: Peter Ujfalusi Date: Wed Oct 21 11:48:13 2026 -0400 ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture [ Upstream commit 746de48c3a250f0c264105dcbfcdf0c5001e970b ] When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono capture stream, such as a SmartMic, aggregated across multiple SDW links), step = ch_count / blob->alh_cfg.device_count truncates to 0. The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds exponent: UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13 shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int' Treat ch_count < device_count the same way as the existing "channels equal to output reference channels" case: apply the same ch_mask to every aggregated device instead of trying to split channels that can't be evenly divided. Fixes: 0390a102cc18 ("ASoC: SOF: ipc4-topology: use different channel mask for each sdw amp feedback") Cc: stable@vger.kernel.org Signed-off-by: Peter Ujfalusi Reviewed-by: Bard Liao Link: https://patch.msgid.link/20261008090130.15135-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown [ sashal: used a standalone guard because the playback-specific conditional is absent ] Signed-off-by: Sasha Levin commit e8dafad7de9ede813af2d48cc04b7c88fef16682 Author: Aviv Vaknin Date: Wed Oct 21 11:29:35 2026 -0400 pid_namespace: make zap_pid_ns_processes() freezable [ Upstream commit 81933038f5e273d17ed22792f906889393b204c5 ] When the init of a pid namespace exits, zap_pid_ns_processes() waits until all other pids in the namespace are freed. A tracer outside the namespace that does not reap its traced zombies keeps those pids allocated, so this wait has no upper bound, and while it lasts every suspend attempt fails: Freezing user space processes failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0): Neither wait is freezable. The first loop sleeps in do_wait(), which returns -ERESTARTSYS on the freezer's fake signal; the loop then clears TIF_SIGPENDING and waits again without ever freezing. The final loop sleeps in TASK_INTERRUPTIBLE, and since nothing clears TIF_SIGPENDING there, schedule() returns immediately after the first freeze attempt and the task spins until the wait ends. Sleep in TASK_INTERRUPTIBLE | TASK_FREEZABLE in do_wait(), so that the freezer can freeze tasks waiting there directly, and in TASK_IDLE | TASK_FREEZABLE in the final loop, like coredump_task_exit() does. This was hit with Chromium-based browsers: crashpad ptrace-attaches the threads of a crashed renderer, which is a pid namespace init, and does not reap those killed during the dump. Fixes: 3eb07c8c8adb ("pid namespaces: destroy pid namespace on init's death") Fixes: b9a985db9896 ("pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes") Cc: stable@vger.kernel.org # 6.1+ Suggested-by: Oleg Nesterov Signed-off-by: Aviv Vaknin Link: https://patch.msgid.link/20261002202820.3433318-1-vaknins33@gmail.com Acked-by: Oleg Nesterov Reviewed-by: Bradley Morgan Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 2358060edbc35a5737eaacc8efaf6fa6db2f17eb Author: Jens Axboe Date: Wed Oct 21 11:29:34 2026 -0400 exit: move core of do_wait() into helper [ Upstream commit 06a101ca45b296fe951692620b0bc49abf90c368 ] Rather than have a maze of gotos, put the actual logic in __do_wait() and have do_wait() loop deal with waitqueue setup/teardown and whether to call __do_wait() again. No functional changes intended in this patch. Acked-by: Christian Brauner Signed-off-by: Jens Axboe Stable-dep-of: 81933038f5e2 ("pid_namespace: make zap_pid_ns_processes() freezable") Signed-off-by: Sasha Levin commit 74b4d2370a9e2b77247063dfa05f452766102676 Author: Christian König Date: Thu Oct 22 07:34:33 2026 -0400 drm/exec: don't immediately add prelocked obj to array of locked objs [ Upstream commit 26401a4999f1596a515b2e704e7066ac09306488 ] When a contention is detected the drm_exec object grabs a reference to the contended object, unlocks all other objects and pre-locks the contended one before anything else. The problem is that it is possible that this pre-locked object was about to be destroyed and drm_exec is now holding the last reference to it. So we never actually see this pre-locked object again to be explicitly locked and so also never reserve a slot for a dma_fence object on it. Should the driver now use drm_exec_for_each_locked_object() to add a new fence to all locked objects we eventually see a warning or even a BUG_ON() to prevent random memory corruption. Fix this by keeping the prelocked object out of the array of locked objs until it was explicitly mentioned by the driver again. If the prelocked object is never mentioned again by the driver just unlock and drop the reference at the end of the locking loop. Signed-off-by: Christian König Reported-by: Vitaly Prosyak Reviewed-by: Vitaly Prosyak Tested-by: Vitaly Prosyak Fixes: 09593216bff1 ("drm: execution context for GEM buffers v7") CC: stable@vger.kernel.org # v6.6+ Link: https://lore.kernel.org/r/20261007124657.9664-1-christian.koenig@amd.com [ sashal: Adapted iterator documentation to preserve the existing explicit index parameter. ] Signed-off-by: Sasha Levin commit 913a1876fbe9a168030013b9e6cb2746fe41fff4 Author: Stanley Jhu Date: Wed Oct 21 17:36:59 2026 -0400 scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies [ Upstream commit ec6b083915e8146e147314a5f4f1285d07b57bfc ] bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after the 40-byte header and writes 8 bytes past the end of the buffer. Let each BSG transport pass its reply buffer size to bsg_setup_queue() and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg") Cc: stable@vger.kernel.org Signed-off-by: Stanley Jhu Link: https://patch.msgid.link/20261013132708.1669415-1-stanleyjhu@google.com Signed-off-by: Martin K. Petersen (Oracle) [ sashal: Adapted bsg_setup_queue() and its callers to the existing interface without a queue-limits parameter. ] Signed-off-by: Sasha Levin commit b4b0598fad51a978fcbda9d55eef6b5bd3cbe7d8 Author: Christian Brauner Date: Wed Oct 21 17:36:51 2026 -0400 ext4: free the sbi after a grace period [ Upstream commit c17b44266a1f9fcb49b894d4611d1254bf1aa313 ] ext4_get_link() follows a symlink that keeps its target in a data block in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT). That reads s_mount_state in the ASSERT() of ext4_getblk() and again in ext4_es_lookup_extent(), and the lookup bumps the extent status hit or miss counter, all through sb->s_fs_info. ext4_put_super() destroys those counters, clears sb->s_fs_info and frees the sbi without waiting for a grace period. A pathwalk that is still in ext4_get_link() when the last reference to the mount goes away then dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu counters. With a pathwalk held up in ext4_get_link() while the last reference goes away: KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:ext4_getblk+0xf0/0x640 Call Trace: ext4_get_link+0x26c/0x410 pick_link+0xf96/0x1780 step_into_slowpath+0x9b8/0x1250 path_lookupat+0x484/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. Keep sb->s_fs_info and free the sbi together with the extent status counters after a grace period. Split the counters out of ext4_es_unregister_shrinker() for that. The shrinker still gets wasted in ext4_put_super(), the counters go with the sbi. Fixes: 6493792d3299 ("ext4: convert symlink external data block mapping to bdev") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-1-7446d2d335e6@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: Replaced shrinker_free() with unregister_shrinker() for the embedded shrinker. ] Signed-off-by: Sasha Levin commit c39150784a801dbbfaf4fbfa284cb610552a5039 Author: Christian Brauner Date: Wed Oct 21 17:37:05 2026 -0400 ntfs3: free the sbi after a grace period [ Upstream commit c01b091b06412d3b1b53d8c2925f6de586c8a2fc ] If the "nocase" mount option ntfs3 uses custom hash and dentry compare functions. Both access ntfs3 superblock private information in rcu pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any rcu delay. A lookup that's still inside the filesystem when the last reference to the mount is dropped causes a UAF. With a pathwalk held up in ntfs_d_hash() while the last reference to the mount goes away: BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940 Read of size 8 at addr ff1100010453c850 by task walker/99 Call Trace: ntfs_nls_to_utf16+0x752/0x940 ntfs_d_hash+0x22b/0x500 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 95: __kmalloc_cache_noprof+0x249/0x560 ntfs_init_fs_context+0x2db/0x5a0 alloc_fs_context+0x52e/0xc70 [...] Freed by task 98: kfree+0x1db/0x5b0 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 task_work_run+0x131/0x250 The bug is currently masked by the grace period in namespace_unlock() for umount(2). Keep the necessary information until the filesystem private info is freed and free it with an rcu delay. ntfs3_free_sbi() now runs from an rcu callback and drops the upcase table via ntfs_put_shared(). So switch s_shared_lock over to spin_lock_bh(). Otherwise the callback can deadlock against a task holding the lock on the same cpu. Fixes: a3a956c78efa ("fs/ntfs3: Add option "nocase"") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-7-7446d2d335e6@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: Omitted removal of mount-option cleanup already absent from ntfs_put_super(). ] Signed-off-by: Sasha Levin commit da52e5fcb2cae6acdc0d5722ff83499f8232b9d1 Author: Cen Zhang (Microsoft) Date: Wed Oct 21 11:42:43 2026 -0400 watch_queue: Fix note pool publication race in watch_queue_set_size() [ Upstream commit 5e531d62f1f8834faf7a4eed0d41105cf6570a8f ] There is a race between watch_queue_set_size() and post_one_notification(). watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and nr_notes with plain stores, and post_one_notification() reads them with plain loads under a different lock, so nothing orders the four stores against the poster's loads: depending on the build, notes can be stored last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch attach to a queue before it is sized, post_one_notification() can already be running on another CPU at that moment: it reads nr_notes > 0, passes its bounds check, and then reads notes while it is still NULL, dereferencing notes[0]. An unprivileged user triggers this reliably by watching one of its own keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE) on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU, triggering: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0 Call Trace: __post_watch_notification+0x148/0x180 keyctl_setperm_key+0x119/0x130 do_syscall_64+0x108/0x4c0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception in interrupt Fix this by publishing nr_notes last with smp_store_release(), and by reading it once with smp_load_acquire() in post_one_notification() before the bitmap and the page array are touched. A poster that observes a non-zero nr_notes then also observes the pool behind it; one that observes zero drops the notification as before. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Dae R. Jeong Closes: https://lore.kernel.org/all/ZT-S8Q7tyutcvu_q@dragonet/ Reported-by: AutonomousCodeSecurity@microsoft.com Suggested-by: Dae R. Jeong Signed-off-by: Cen Zhang (Microsoft) Link: https://patch.msgid.link/20261009224715.46121-1-cenzhang@linux.microsoft.com Reviewed-by: Bradley Morgan Cc: Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 5e1e8702f45d1dbd3421fa48bb92929a66617f08 Author: K Prateek Nayak Date: Wed Oct 21 11:42:42 2026 -0400 kernel/watch_queue: Use pipe_buf() to retrieve the pipe buffer [ Upstream commit 547476063e123e73fc3aea8432104ab092ffea84 ] Use pipe_buf() helper to retrieve the pipe buffer in post_one_notification() replacing the open-coded the logic. Suggested-by: Oleg Nesterov Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20250307052919.34542-3-kprateek.nayak@amd.com Signed-off-by: Christian Brauner Stable-dep-of: 5e531d62f1f8 ("watch_queue: Fix note pool publication race in watch_queue_set_size()") Signed-off-by: Sasha Levin commit cd7cd04be583bda0f27cc7781230b60812f57008 Author: Joseph Qi Date: Thu Oct 22 14:40:46 2026 +0800 eventfs: fix SRCU read lock leak in eventfs_iterate() Commit 25d27d5fa864 ("eventfs: Use children field for rcu head and add memory barriers") added an early bail out to the ei->children loop: smp_rmb(); if (ei->is_freed) return -EINVAL; Upstream wraps eventfs_iterate() in guard(srcu)(&eventfs_srcu), so that return still drops the read lock. The 6.6.y backport instead brackets the function with srcu_read_lock() and a shared "out" label that calls srcu_read_unlock(), so this path returns while still holding eventfs_srcu for reading. The unbalanced reader prevents the grace period from ever completing, so the call_srcu() callback queued by free_ei() never runs and the eventfs_inode is leaked. Every readdir that races with removal adds another reader. Set ret and jump to "out" like the other bail out paths in this function do. Fixes: 25d27d5fa864 ("eventfs: Use children field for rcu head and add memory barriers") Signed-off-by: Joseph Qi Signed-off-by: Sasha Levin commit c3b6aa73a895e43d86fd12e4ef03dca4d7e035fc Author: Lorenzo Stoakes (ARM) Date: Wed Oct 21 16:55:41 2026 +0100 perf: Track the perf mlock gift separately commit 78436f3882fb8d848c823bf8cf754988202c5ca5 upstream. The locked_vm field in struct user_struct was originally introduced by commit 789f90fcf6b0 ("perf_counter: per user mlock gift") to provide an mlock-like budget for perf measured against mm->pinned_vm (since 2011). perf grants each user a 'gift' of perf_event_mlock_kb * online CPUs of buffer pages which is charged to user->locked_vm without any RLIMIT_MEMLOCK check. Only pages beyond the gift are checked against RLIMIT_MEMLOCK, per-mm, via mm->pinned_vm, which makes it different from the standard mlock() check, which is per-mm and made against RLIMIT_MEMLOCK. However, since this was introduced, a number of other components have utilised this field where a shared resource needed to be limited against RLIMIT_MEMLOCK. The other users are currently MSG_ZEROCOPY, io_uring, AF_XDP, iommufd, s390 KVM zPCI and most recently, secretmem in commit 97d34aa65c29 ("mm/secretmem: properly account locked pages"). This field is shared between all of these, but because the gift is not checked against RLIMIT_MEMLOCK, user->locked_vm alone can exceed it - 16 CPUs * 516 KiB is already more than the default 8 MiB - after which every other user of the field fails unconditionally. This was reported by a user who saw secretmem failing while running a simultaneous perf record. Resolve the issue by simply giving perf its own field separate from the rest. BPF used user->locked_vm up until commit 80ee81e0403c ("bpf: Eliminate rlimit-based memory accounting infra for bpf maps") which landed in 5.11. Thus also eliminate the now-defunct ifdef for CONFIG_BPF_SYSCALL for user->locked_vm. This issue exists between all of the components which use user->locked_vm and perf, however secretmem is the first user who has caused a report over many years and has been backported, so target the fix at that. Fixes: 97d34aa65c29 ("mm/secretmem: properly account locked pages") Closes: https://lore.kernel.org/20261002175651.811343-1-ameer.hamza@truenas.com Reported-by: Ameer Hamza Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org [ ljs - Applied to open-coded accounting in perf_mmap()/perf_mmap_close(). ] Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Sasha Levin commit 00ff1128123d4bdfacd28d68fb4b6e6f657a3648 Author: Laurence Oberman Date: Wed Oct 21 11:56:02 2026 -0400 scsi: st: Fix use-after-free race between st_remove() and st_open() commit 71caf7f84bd62a4bf91cc95abd2de690afb8d15f upstream. st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put(). Fixes: 6c648d95a6af ("[SCSI] st: get rid of scsi_tapes array") Cc: stable@vger.kernel.org Reported-by: Dingisoul Closes: https://lore.kernel.org/linux-scsi/20261007211520.1428497-1-dingiso.kernel@gmail.com/ Tested-by: Dingisoul Signed-off-by: Laurence Oberman Link: https://patch.msgid.link/20261013202548.249628-1-loberman@redhat.com Signed-off-by: Martin K. Petersen (Oracle) [ loberman: st_remove() still returns int in 6.6; context adjusted ] Signed-off-by: Laurence Oberman Signed-off-by: Sasha Levin commit 98975a717228897af08359d30915dcc85d9aa34b Author: Paulo Alcantara Date: Mon Aug 24 16:59:12 2026 -0300 smb: client: fix multiuser mount with krb5 commit 69499395867332364ed4ac8b546537eb3bab6ebb upstream. Customer reported that they could no longer mount their SMB shares with multiuser mount option and krb5. Turned out that the client wasn't duplicating username option when creating multiuser connections, therefore failing to retrieve credentials as cifs.upcall(8) couldn't find them in keytab. Fix this by duplicating username option (if set) from original fs context before creating multiuser connections with krb5. Reproducer: ``` $ ktutil ktutil: add_entry -password -p testuser -k 1 -e aes256-cts Password for testuser@ZELDA.TEST: ktutil: write_kt /etc/krb5.keytab ktutil: quit $ klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- ---------------------------------------------------------------- 1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96) $ mount.cifs //w22-root2/scratch /mnt/1 -o \ uid=1000,sec=krb5,username=testuser@ZELDA.TEST,multiuser mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) and kernel log messages (dmesg) ``` Reported-by: Jacob Shivers Fixes: 12b4c5d98cd7 ("smb: client: fix krb5 mount with username option") Cc: Ronnie Sahlberg Cc: Shyam Prasad N Cc: Tom Talpey Cc: Bharath SM Cc: Namjae Jeon Cc: stable@vger.kernel.org Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara Signed-off-by: Greg Kroah-Hartman commit 68652afb9b9adf70125971abee9b95341e042249 Author: Frank Sorenson Date: Wed Aug 26 21:13:36 2026 -0500 smb: client: fix heap overflow in cifs_do_set_acl() commit 1dac61e2c29d1a71784604b48cf3b1234a65ec29 upstream. cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). Fixes: dc1af4c4b4721 ("cifs: implement set acl method") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Signed-off-by: Paulo Alcantara Signed-off-by: Greg Kroah-Hartman commit cff9bf34afde46c238189cc6f7690b7e35225df1 Author: Aohan Mei Date: Wed Aug 26 10:51:20 2026 +0800 net/sched: cls_flower: validate mask pointer after nla_next() commit fee10655709c5c597e8e9f722f3035d9ea31ff3a upstream. fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes. Fixes: c96adff95619 ("cls_flower: call nla_ok() before nla_next()") Reported-by: TencentOS Corvus AI Cc: stable@vger.kernel.org Signed-off-by: Aohan Mei Link: https://patch.msgid.link/20260826025123.62758-1-ljp1205831794@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1a35a81c302b36fe4acd35b47b51d5d73e89ba0a Author: Aleksandr Khromov Date: Mon Aug 24 13:22:46 2026 +0300 ksmbd: zero the FS_OBJECT_ID_INFORMATION buffer before filling it in commit 399aa12450a61a5c73dc77e73f069ece9687c95d upstream. smb2_get_info_filesystem() reports 64 bytes for FS_OBJECT_ID_INFORMATION, that is the whole of struct object_id_info, but writes only 46 of them: - objid[] is 16 bytes, and when the volume UUID is not available only sizeof(stfs.f_fsid) (8) bytes are copied into it; - extended_info.version_string[] is STRING_LENGTH (28) bytes, and only strlen("1.1.0") (5) bytes are copied into it. The response buffer is zeroed on allocation (kvzalloc() in smb2_allocate_rsp_buf()), so for a standalone request the remaining 31 bytes are zero. In a compound request they need not be. The offset of the next response is advanced by the length pinned for the previous one, so if a preceding command wrote its reply into the buffer and then failed, smb2_set_err_rsp() pins only the short error response and the next reply lands inside the area that has already been written. Only the header is cleared there: memset((char *)rsp_hdr, 0, sizeof(struct smb2_hdr) + 2); The client then receives up to 31 bytes of a response it was not meant to see, including one that failed with an access denied error. Clear the structure before filling it in. As a side effect version_string is now NUL terminated. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Suggested-by: ChenXiaoSong Cc: stable@vger.kernel.org Signed-off-by: Aleksandr Khromov Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit e8b82184a1982894820a91a72ac9857ddd5dffbf Author: Aleksandr Khromov Date: Mon Aug 24 21:23:32 2026 +0900 ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION commit c0cd3fc6824122014da2b3b0cb7ddeaa2946ec8e upstream. smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION, that is the whole of struct smb2_fs_control_info, but never assigns FileSystemControlFlags. Those four bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. ksmbd does not implement quota tracking, so report no control flags. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Aleksandr Khromov Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit da2ec27fdd7effbe4c94ec15b6c6a281800c5123 Author: Aleksandr Khromov Date: Tue Aug 25 10:19:21 2026 +0900 ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION commit db2267b27c054a6c2151ff7fbb67927e784f31d6 upstream. smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION, that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns FileSysIdentifier. Those eight bytes go to the client as they are found in the response buffer. The buffer is zeroed on allocation, so a standalone request leaks nothing. A compound request can leak: the offset of the next response is advanced by the length pinned for the previous one, so a reply that was written into the buffer and then dropped in favour of the short error response of smb2_set_err_rsp() stays there, and the next reply is laid over it with only the header cleared. Report the file system id statfs() returned, which is what the field is for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so assemble the value first, val[0] as the low half, and convert it on the way out. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Aleksandr Khromov Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit b0db9f4ff402becff710ab27dbd9f6fe4850b47e Author: Jun Yang Date: Mon Aug 31 19:13:04 2026 +0800 net: bridge: mcast: don't truncate the port group walk on teardown commit 5a3f7a683aee56e1f15c9d53041f3236767eaae7 upstream. __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case. Fixes: b08123684bd5 ("net: bridge: mcast: install S,G entries automatically based on reports") Cc: stable@vger.kernel.org Suggested-by: Nikolay Aleksandrov Reported-by: TencentOS Corvus AI Signed-off-by: Jun Yang Reviewed-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260831111330.199543-1-junvyyang@tencent.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 9ca91638aa027acca237d470b8c084a4e25db577 Author: Kairui Song Date: Sun Dec 22 20:29:36 2024 +0800 mm, madvise: fix potential workingset node list_lru leaks [ Upstream commit 62e72d2cf702a5e2fb53d9c46ed900d9384e4a06 ] Since commit 5abc1e37afa0 ("mm: list_lru: allocate list_lru_one only when needed"), all list_lru users need to allocate the items using the new infrastructure that provides list_lru info for slab allocation, ensuring that the corresponding memcg list_lru is allocated before use. For workingset shadow nodes (which are xa_node), users are converted to use the new infrastructure by commit 9bbdc0f32409 ("xarray: use kmem_cache_alloc_lru to allocate xa_node"). The xas->xa_lru will be set correctly for filemap users. However, there is a missing case: xa_node allocations caused by madvise(..., MADV_COLLAPSE). madvise(..., MADV_COLLAPSE) will also read in the absent parts of file map, and there will be xa_nodes allocated for the caller's memcg (assuming it's not rootcg). However, these allocations won't trigger memcg list_lru allocation because the proper xas info was not set. If nothing else has allocated other xa_nodes for that memcg to trigger list_lru creation, and memory pressure starts to evict file pages, workingset_update_node will try to add these xa_nodes to their corresponding memcg list_lru, and it does not exist (NULL). So they will be added to rootcg's list_lru instead. This shouldn't be a significant issue in practice, but it is indeed unexpected behavior, and these xa_nodes will not be reclaimed effectively. And may lead to incorrect counting of the list_lru->nr_items counter. This problem wasn't exposed until recent commit 28e98022b31ef ("mm/list_lru: simplify reparenting and initial allocation") added a sanity check: only dying memcg could have a NULL list_lru when list_lru_{add,del} is called. This problem triggered this WARNING. So make madvise(..., MADV_COLLAPSE) also call xas_set_lru() to pass the list_lru which we may want to insert xa_node into later. And move mapping_set_update to mm/internal.h, and turn into a macro to avoid including extra headers in mm/internal.h. Link: https://lkml.kernel.org/r/20241222122936.67501-1-ryncsn@gmail.com Fixes: 9bbdc0f32409 ("xarray: use kmem_cache_alloc_lru to allocate xa_node") Reported-by: syzbot+38a0cbd267eff2d286ff@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/675d01e9.050a0220.37aaf.00be.GAE@google.com/ Signed-off-by: Kairui Song Cc: Chengming Zhou Cc: Johannes Weiner Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Muchun Song Cc: Qi Zheng Cc: Roman Gushchin Cc: Sasha Levin Cc: Shakeel Butt Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 6273bfdeb248d5ce527a660a73fcc588a9baf143 Author: Hyunwoo Kim Date: Tue Oct 20 19:45:03 2026 -0700 KVM: x86/mmu: Preserve nested TDP shadow page tables if they are used as roots [ Upstream commit 7a2c70e777a00c32ebafd376a6fe31ebb91c5b20 ] kvm_mmu_zap_oldest_mmu_pages() excludes a shadow page whose root_count is non-zero from top-level reclaim, because such a page cannot be freed. The path in mmu_page_zap_pte() that recursively zaps a parentless nested TDP child has no such check. As a result, a shadow page can be zapped even if the page itself can't be freed; as the comment in kvm_mmu_zap_oldest_mmu_pages() notes, zapping it will just force vCPUs to rebuild the page. As in top-level reclaim, do not recursively prepare zapping of a nested TDP child whose root_count is non-zero. Fixes: 2de4085cccea ("KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent") Signed-off-by: Hyunwoo Kim Signed-off-by: Paolo Bonzini [sean: resolve minor conflict due to lack of lockless aging in 6.12] Signed-off-by: Sean Christopherson Signed-off-by: Sasha Levin commit 25dbafda0e43292669223dbcb2b682b61b89e341 Author: Matt Fleming Date: Sat Jul 25 11:14:19 2026 +0100 mm/huge_memory: initialise workingset state before folio split [ Upstream commit aca1f2d5de17e138bc6c4859126b77e516b82541 ] xas_try_split() adds __GFP_ACCOUNT for page-cache xa_nodes, but __folio_split() leaves the xa_state's xa_lru unset. That lets a live, memcg-charged xa_node exist without being linked into the mapping's shadow_nodes list_lru; when reclaim later walks the list_lru it trips VM_WARN_ON(!css_is_dying()). Use mapping_set_update() to install both the workingset update callback and the shadow_nodes list_lru on the xa_state. Link: https://lore.kernel.org/20260725101419.3938406-1-matt@readmodwrite.com Fixes: 58729c04cf10 ("mm/huge_memory: add buddy allocator like (non-uniform) folio_split()") Signed-off-by: Matt Fleming Reported-by: syzbot+c5b060ce82921a2fd500@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c5b060ce82921a2fd500 Reviewed-by: Zi Yan Acked-by: David Hildenbrand (Arm) Cc: Baolin Wang Cc: Barry Song Cc: Dave Chinner Cc: Dev Jain Cc: Kairui Song Cc: Lance Yang Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Matthew Wilcox (Oracle) Cc: Muchun Song Cc: Nico Pache Cc: Roman Gushchin Cc: Ryan Roberts Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 6ae0cfcb742344c2f375ddab3a169f024ebe7e16 Author: David Rosca Date: Thu Aug 20 16:32:51 2026 +0200 drm/amdgpu: Fix VCE 3 ring align_mask [ Upstream commit 2ee9836545e690c9e66ec203445d7705959fd7a8 ] The largest frame is 20 dwords, so 0xf mask is too small. This was always wrong, but we were lucky with the VCE_CMD_END commands inserted after fence and vm_flush. Fixes: 8897ea8c761b ("drm/amdgpu: Implement insert_end for VCE 3") Cc: stable@vger.kernel.org Acked-by: Alex Deucher Signed-off-by: David Rosca Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 226a974054acbd892560bfa67f0ae8ffe271a736 Author: Zihan Xi Date: Thu Aug 27 18:25:14 2026 +0000 ipv4: avoid divide by zero in fib_rebalance commit 5046d2880fec7d49ebed2fd2866747ee1d06ad71 upstream. fib_rebalance() computes the total eligible nexthop weight in one pass and programs upper bounds in a second pass. A concurrent change to ignore_routes_with_linkdown can make the first pass return zero while the second pass sees an eligible nexthop, resulting in division by zero. If the first pass reports a zero total, set each nexthop upper bound to -1 and skip the division. This matches the IPv6 fix in commit d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance") and preserves the lock-free rebalance path. Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Reviewed-by: Eric Dumazet Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260827182514.4667-2-zihanx@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ff31c34e921d11c7da3d7664ce495106267ca408 Author: Niklas Schnelle Date: Thu Aug 6 11:43:39 2026 +0200 s390/pci: Fix leak of uninitialized kernel data in SCLP report commit 8ac60ae2a307a50b599bf5d300b448d638f3ba29 upstream. While report_error_write() checks that the provided buffer is at least as large as the header struct, but not that it is large enough to contain the report with the length claimed by report->length. If user-space provides a short buffer, meaning a larger report->length than the actually written payload, up to around 4K of kernel data from past the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter() will leak into the SCLP report. However, as the entity processing the SCLP is privileged and able to access at least the page including the report, this does not leak data that entity could not access but it is still an out of bounds read and a malformed error report that should be rejected. Fixes: 368704a65be8 ("s390/pci: add report_error attribute") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit 977dac6cc5531a8e058df05b6af94406b940cb9e Author: Aswin Karuvally Date: Thu Aug 27 08:34:08 2026 +0200 s390/ctcm: Prevent XID null dereference commit b264d8422779d69febce914efc47a92a85cc382c upstream. The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Cc: stable@vger.kernel.org Signed-off-by: Aswin Karuvally Link: https://patch.msgid.link/20260827063408.2168914-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ccc28e498ef1c6eaaa16e61c6edb52c32a4f14bb Author: Florian Schauer Date: Fri Aug 28 08:08:22 2026 +0200 page_pool: keep frag_offset aligned for odd-sized requests commit dc0df5a0c62ccea1d0e08d39a4dc9064de81d411 upstream. page_pool_alloc_frag_netmem() rounds the requested fragment size with size = ALIGN(size, dma_get_cache_alignment()); dma_get_cache_alignment() returns 1 unless the architecture defines ARCH_DMA_MINALIGN, which DMA-coherent architectures such as x86 do not. There the ALIGN() is a no-op and pool->frag_offset advances by the raw, unrounded size. A single caller asking for an odd size then leaves frag_offset misaligned for every fragment carved out of that page afterwards. The pool is shared, so the damage is not confined to the caller that caused it. The per-cpu system_page_pool used by generic XDP hits this. skb_pp_cow_data() allocates its fragments with the raw packet length: size = min_t(u32, len, PAGE_SIZE); truesize = size; page = page_pool_dev_alloc(pool, &page_off, &truesize); leaving frag_offset odd for whatever is carved out of that page next. Its own head allocation is already aligned -- SKB_HEAD_ALIGN(size) plus the XDP_PACKET_HEADROOM its callers pass -- so it is a later user of the shared pool that pays: page_pool_dev_alloc_va() returns a misaligned buffer, napi_build_skb() installs it as skb->head, and skb_shinfo(skb) == skb->head + skb->end is misaligned with it. skb_shinfo()->dataref is a 4-byte atomic_t at offset 0x20, so the atomic_inc() in __skb_clone() straddles a cache line. On x86 with split lock detection -- fatal for kernel split locks by default -- this panics the machine: Oops: Split lock detected RIP: 0010:skb_clone+0x154/0x1e0 Call Trace: raw_local_deliver+0x1ed/0x2c0 ip_protocol_deliver_rcu+0x54/0x1c0 ip_local_deliver_finish+0x85/0x100 ip_local_deliver+0x67/0x100 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0x87/0x130 Reproduced by attaching any generic-mode XDP program to loopback and opening a RAW IPPROTO_UDP socket, which makes raw_local_deliver() clone every locally delivered UDP packet; ordinary DNS traffic then triggers it, roughly once per 2500 clones. Observed on 6.12.101 and 7.1.8. Tracing page_pool_alloc_frag_netmem() over one such run shows the amplification -- two odd-sized requests, nine misaligned offsets: requested size & 7: 0: 17035 5: 1 7: 1 frag_offset & 7: 0: 17028 3: 1 4: 1 5: 1 6: 1 7: 5 and skb_pp_cow_data() returning heads that were aligned on entry: head 0xffff8f4c86aeac00 -> 0xffff8f4c53a9a9c4 (&7=4) head 0xffff8f4d6a8a42c0 -> 0xffff8f4c4f7b7a45 (&7=5) Round the fragment size up to at least the alignment struct skb_shared_info requires, so fragments are always suitably aligned for the objects callers build on them. Architectures needing a larger DMA alignment keep it. This also makes the remainder computed in page_pool_alloc_netmem(), *size = max_size - *offset; aligned, since max_size is a power of two -- which fixes the matching misalignment of skb->end. Verified with a controlled A/B under QEMU/KVM: same tree, same config, same compiler, same rootfs and identical traffic, differing only by this patch. A SEC("xdp.frags") XDP_PASS program on lo plus UDP datagrams larger than max_head_size drives skb_pp_cow_data()'s fragment loop, which passes raw packet lengths to the pool. Measured at the return of skb_pp_cow_data(): unpatched patched skb_pp_cow_data calls 40800 40800 misaligned skb->head 1120 0 dataref at line offset >60 80 0 The last row counts the accesses that actually fault: skb_shinfo()->dataref sits at head+end+0x20 and is a 4-byte atomic, so `lock incl` splits a 64-byte cache line only when that address lands at offset 61..63. All 80 occurrences were at offset 61; the panic reported above was at offset 62. Eliminating the misalignment removes every one of them. Same class of bug as commit 3bed3cc4156e ("net: Do not allocate page fragments that are not skb aligned"), which fixed the older netdev_alloc_frag()/napi_alloc_frag() allocators. Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool") Cc: stable@vger.kernel.org Signed-off-by: Florian Schauer Acked-by: Jesper Dangaard Brouer Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260828060822.2628276-1-florian@schauer.to Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5a7ee52589dae36c93dc64d7a97c5ded84618572 Author: Charles Vosburgh Date: Thu Aug 27 17:32:53 2026 -0400 sctp: validate chunk length in the inqueue parser commit 6cfc1b90cb86f4aabc69fb8e30128e07e2cdfa3a upstream. SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request. Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk") Cc: stable@vger.kernel.org Signed-off-by: Charles Vosburgh Acked-by: Xin Long Link: https://patch.msgid.link/20260827-sctp-zero-chunk-inqueue-v2-1-2e7669c6a6cb@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 6abd93d01b0f495f29201925a5ee8e6a583c4044 Author: Chengfeng Ye Date: Wed Aug 26 03:01:41 2026 +0800 tipc: protect node reset trace dump with node lock commit dddf197f29ba5e47a476dde82bf542ca2e0d5e5e upstream. The tipc_node_reset_links trace event asks tipc_node_dump() to walk the node's link entries. Unlike the other node events that request link data, this event runs without the node lock. This permits bearer teardown to free a link while the trace callback is dumping it: CPU 0 CPU 1 trace_tipc_node_reset_links() tipc_node_dump() l = n->links[0].link tipc_node_write_lock() kfree(l) n->links[0].link = NULL tipc_node_write_unlock() tipc_link_dump(l) tipc_link_dump() then dereferences the stale pointer. KASAN reported: BUG: KASAN: slab-use-after-free in tipc_link_dump Read of size 4 by task poc/115 Call Trace: tipc_link_dump+0x10cb/0x16b0 tipc_node_dump+0x4bb/0x740 trace_event_raw_event_tipc_node_class+0x258/0x360 tipc_node_reset_links+0x14d/0x1a0 tipc_rcv+0x13f5/0x3030 tipc_udp_recv+0x4e3/0x670 Allocated by task 0: tipc_link_create+0x1e1/0x1020 tipc_node_check_dest+0x7d2/0x11a0 tipc_disc_rcv+0xdbf/0x1430 Freed by task 89: kfree+0x131/0x3c0 tipc_node_link_down+0x267/0x4b0 tipc_node_delete_links+0xec/0x160 bearer_disable+0x107/0x260 Take the node write lock around the trace event. This serializes the dump against tipc_node_link_down(delete=true), which frees the link under the same write lock. Fixes: eb18a510b5cd ("tipc: add trace_events for tipc node") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260825190141.242219-1-nicoyip.dev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e84bfb08016496ec5ce09a5ef9c813f23c060781 Author: Carlos Maiolino Date: Tue Aug 4 11:45:51 2026 +0200 xfs: fix capability check in xfs commit e2f62a9744ebad3bcb6347a648e615026e9efeff upstream. An user reported a bug where he managed to evade group's quota by changing a file's gid to a different group id the same user belonged to, even though quotas were enforced on both gids and the file's size was big enough to exceed the quota's hardlimit. Commit eba0549bc7d1 replaced a capable() call by a has_capability_noaudit() to prevent unnecessary selinux audit messages. Turns out that both calls have slightly different semantics even though their documentation seems similar. Where in a nutshell: capable() - Tests the task's effective credentials has_ns_capability_noaudit() - Tests the task's real credentials This most of the time has no practical difference but in some cases like changing attrs (specifically group id in this case) through a NFS client this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively bypassing quota accounting checks. Using instead ns_capable_noaudit() should fix this issue and prevent selinux audit messages. This also fix the remaining calls to has_capability_noaudit() Fixes: eba0549bc7d1 ("xfs: don't generate selinux audit messages for capability testing") Cc: stable@vger.kernel.org # v5.18 Reported-by: Dr. Thomas Orgis Signed-off-by: Carlos Maiolino Reviewed-by: Darrick J. Wong Reviewed-by: Serge Hallyn Reviewed-by: Christoph Hellwig Signed-off-by: Carlos Maiolino Signed-off-by: Greg Kroah-Hartman commit 23e7fbbdca5aaba2a9a7bb9e4f2dc179c290ee76 Author: Bryam Vargas Date: Fri Aug 28 14:07:47 2026 -0500 net/iucv: fix the recvmsg window update commit fa5acd038ea657ad5033713d6916214cbd349151 upstream. iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped. Fixes: 3881ac441f64 ("af_iucv: add HiperSockets transport") Fixes: 238965b71b96 ("net/af_iucv: build proper skbs for HiperTransport") Cc: stable@vger.kernel.org Tested-by: Aswin Karuvally Signed-off-by: Bryam Vargas Reviewed-by: Alexandra Winter Link: https://patch.msgid.link/20260828-b4-disp-33fac0ed-v3-1-e6d061880ee0@proton.me Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b090c321f203d61f0399772cb4f547737c733bc9 Author: Genjian Zhang Date: Fri Aug 7 23:57:15 2026 +0800 dm-ebs: fix incorrect device offset check in ebs_ctr() commit 7ac81e2d2240f2c57bd073b0733e0b2abca38e82 upstream. is a backing-device sector offset; ti->len is the virtual target length. Comparing them rejects valid tables, e.g.: dmsetup create ebs0 --table "0 1048576 ebs /dev/sda 2097152 1 8" -> ebs: Invalid device offset sector (-EINVAL) Drop the check. Bounds against the backing device are already enforced later by device_area_is_invalid() via ebs_iterate_devices(). Cc: stable@vger.kernel.org Fixes: d3c7b35c20d6 ("dm: add emulated block size target") Signed-off-by: Genjian Zhang Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 056bf8322e39a48026df352d6227ec03dd8cd032 Author: Ben Cressey Date: Wed Aug 26 00:25:33 2026 +0000 dm-crypt: fix a tiny race condition in crypt_dec_pending commit 148845aa1921d95ef5dc851c76e6a284f6657df6 upstream. crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed. Fixes: b35f8caa0890 ("dm crypt: wait for endio to complete before destruction") Cc: stable@vger.kernel.org Reviewed-by: Jose Fernandez (Anthropic) Signed-off-by: Ben Cressey Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 8433fd005c25fd127021f67c9144a879fb585572 Author: Benjamin Marzinski Date: Tue Aug 25 15:22:26 2026 -0400 dm cache: fix issue with background work locking commit bc9781c0247de107876f32929f1637db93a42b34 upstream. dm cache used a rw_semaphore for background_work_lock. Write locks on rw_semaphores have strict owner semantics, but there was no guarantee that the process that locked background_work_lock was the same process that unlocked it. This can be easily seen using a kernel compiled with CONFIG_DEBUG_RWSEMS. Given a dm cache device , run: 'dmsetup suspend && dmsetup resume '. This will trigger a kernel warning: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)) triggered by cache_resume(). To fix this, switch from a rw_semaphore to a spinlock and a wait queue. dm cache already has a wait queue and associated counter, migration_wait and nr_allocated_migrations, that was getting woken up when background work was getting completed, but wasn't actually used by anything. This is replaced by the background_work queue and counter. Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Marzinski Reviewed-by: Matthew Sakai Reviewed-by: Ming-Hung Tsai Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 495ef656f965fd6a25385970163f16b9edb1143d Author: Ming-Hung Tsai Date: Tue Aug 18 18:05:47 2026 +0800 dm cache: fix demotion stats in passthrough mode commit 2ccb8878c149443c6acf628b438c9c942c20abb2 upstream. The demotion counter is incremented per incoming write bio before the invalidation begins, causing the demotion count to exceed the actual number of cached blocks when multiple bios target the same cached block. Additionally, the counter is incremented unconditionally regardless of invalidation failure. Reproduce steps: 1. Create a cache device consisting of 512 cache entries modprobe brd rd_size=262144 dmsetup create cmeta --table "0 8192 linear /dev/ram0 0" dmsetup create cdata --table "0 65536 linear /dev/ram0 8192" dmsetup create corig --table "0 65536 linear /dev/ram0 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 65536 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --direct=1 --ioengine=libaio --iodepth=32 --io_size=2048m nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 65536 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache with multiple jobs to trigger multiple bios hitting the same cached block. fio --filename=/dev/mapper/cache --name=test --rw=write --bs=4k \ --direct=1 --ioengine=libaio --iodepth=32 --numjobs=4 5. Check if demoted matches cached block count. These numbers should match but may differ due to overcounting per bio. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" Fix by moving the demotion counter increment into invalidate_complete(), gated on the success flag. Reported-by: Ben Marzinski Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Ming-Hung Tsai Reviewed-by: Benjamin Marzinski Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit f88339e197ea90a379acb3ae8862d8ea7440d3de Author: Etienne Perot Date: Fri Aug 28 21:52:51 2026 +0000 cgroup: fix spurious SIGKILL of CLONE_INTO_CGROUP children commit 8e359920216689b3b79e0fe8961a77fe312a511f upstream. Since commit b69bb476dee9 ("cgroup: fix race between fork and cgroup.kill"), the fork path snapshots the kill_seq of the child's future cgroup into kargs->kill_seq, and cgroup_post_fork() SIGKILLs the child if that cgroup's kill_seq has changed in the meantime, to catch forks racing with a cgroup.kill sweep. For CLONE_INTO_CGROUP, however, the snapshot in cgroup_css_set_fork() is taken before the target cgroup has been resolved: kargs->cgrp is always NULL at this point (it is only set at the end of the function). So the "if (kargs->cgrp)" branch is dead code and the snapshot always records the kill_seq of the parent's cgroup. cgroup_post_fork() then compares it with the kill_seq of the target cgroup, so the child gets SIGKILLed whenever the two cgroups have been killed a different number of times. As a result, once cgroup.kill has been written to a cgroup, every child subsequently cloned into it with clone3(CLONE_INTO_CGROUP) is killed on the spot, for as long as the cgroup exists: kill_seq is not exposed to userspace and never resets. Re-snapshot kill_seq from the target cgroup once it has been resolved, and drop the dead branch at the early snapshot site. This does not reopen the race fixed by b69bb476dee9. For CLONE_INTO_CGROUP, everything from the snapshot to the check in cgroup_post_fork() runs with cgroup_mutex held, and kill_seq is only ever incremented under cgroup_mutex. tj: Updated the comment above kill_seq to reflect the new serialization rules as suggested by Shakeel Butt. Fixes: b69bb476dee9 ("cgroup: fix race between fork and cgroup.kill") Cc: stable@vger.kernel.org Cc: Shakeel Butt Assisted-by: LLM Signed-off-by: Etienne Perot Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 8d5fc9e6dc09174d0da6e59678eb8e01a890cbd3 Author: Cen Zhang (Microsoft Security FORGE Labs) Date: Thu Aug 27 19:55:11 2026 -0400 tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) commit 385e474086c2e7e29e2dded690be40dc273e20ee upstream. do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer. Fixes: 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf") Suggested-by: Eric Dumazet Cc: AutonomousCodeSecurity@microsoft.com Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet Signed-off-by: Cen Zhang (Microsoft Security FORGE Labs) Reviewed-by: Jiayuan Chen Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/65fd3816ed5d541d9edd4bf4fcf97104a2cf907a.1787870710.git.blbllhy@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4b0930d66dde0a1d1898f0edbbb5496c4dfa5f03 Author: Cen Zhang (Microsoft Security FORGE Labs) Date: Thu Aug 27 19:55:10 2026 -0400 tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION) commit 5271b79b7ad68dcb222e893773f92bdabf7750f3 upstream. do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically allocated BPF struct_ops memory that may be freed concurrently via setsockopt(TCP_CONGESTION), leading to a use-after-free. BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60 Read of size 16 at addr ffff888013505260 by task exploit/149 _copy_to_user+0x37/0x60 do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by holding rcu_read_lock() around the ca_ops->name access, using READ_ONCE() to load icsk_ca_ops, and copying the name to a stack buffer before releasing the lock. Also annotate the relevant icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN data-race issue. Fixes: 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf") Suggested-by: Eric Dumazet Reported-by: Xiang Mei (Microsoft) Link: https://lore.kernel.org/all/20260821182449.79785-2-blbllhy@gmail.com/ Cc: AutonomousCodeSecurity@microsoft.com Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet Signed-off-by: Cen Zhang (Microsoft Security FORGE Labs) Reviewed-by: Jiayuan Chen Reviewed-by: Matthieu Baerts (NGI0) Reviewed-by: Breno Leitao Link: https://patch.msgid.link/d3f97f1acbf0010898148be6e6406e4b8b4a5c84.1787870710.git.blbllhy@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit dda5245afc3470d70406764e3d9f5508e534920a Author: Heyang Tan Date: Fri Sep 18 16:33:49 2026 +0800 wifi: p54: validate firmware record lengths commit db7b86bd97b380ece8fa39cfdd7502a9fd35e56f upstream. The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state. Assisted-by: LLM Codex Signed-off-by: Heyang Tan Tested-by: Christian Lamparter Link: https://patch.msgid.link/20260918083349.891-1-thy15333007817@163.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit ab320f6aa3769480f735ed0ad026c4a61799b7bc Author: Tengda Wu Date: Tue Sep 29 10:40:15 2026 +0000 tracing: Fix hist trigger timestamps for buffered events commit 9414ca3b99e5a7f1f3bf51c2a01b383e1b355dd0 upstream. Syzkaller triggered a WARN_ON_ONCE(!nest) warning: WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp Call trace: ring_buffer_event_time_stamp hist_field_timestamp hist_fn_call event_hist_trigger event_triggers_call __event_trigger_test_discard trace_event_buffer_commit do_trace_event_raw_event_sched_switch trace_event_raw_event_sched_switch The warning is probabilistically reproducible and is related to syzkaller executing the following commands: echo 'prev_pid == 999999' > events/sched/sched_switch/filter echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger The specific triggering process is as follows: CPU 0 CPU 1 (context switching) (echo 'hist:keys=common_timestamp' > \ events/sched/sched_switch/trigger) do_trace_event_raw_event_##call trace_event_buffer_lock_reserve if (!tr->no_filter_buffering_ref && trace_file->flags & EVENT_FILE_FL_FILTERED) return entry; // return directly event_hist_trigger_parse hist_register_trigger tracing_set_filter_buffering(file->tr, true); tr->no_filter_buffering_ref++; __trace_buffer_lock_reserve rb_start_commit local_inc(&cpu_buffer->committing); // skipped and not executed trace_event_buffer_commit __event_trigger_test_discard event_triggers_call event_hist_trigger hist_fn_call hist_field_timestamp ring_buffer_event_time_stamp nest = local_read(&cpu_buffer->committing); WARN_ON_ONCE(!nest) // trigger warning The root cause is that when an event file has a filter attached and the hist trigger has not yet been attached, trace_event_buffer_lock_reserve() writes the event into the per-CPU trace_buffered_event temp buffer instead of reserving it in the ring buffer, so cpu_buffer->committing is not incremented. When the event is later processed at commit time by a hist trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a zero committing count, triggering WARN_ON_ONCE(!nest). tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing: Add tracing_event_time_stamp() API") for exactly this case: if the event is the per-CPU trace_buffered_event, it returns the current ring buffer timestamp. But it never gained a caller. Use it in hist_field_timestamp(), so that a hist trigger that races onto a buffered event records the current time, which is only marginally later than when the event was recorded, instead of warning and recording a bogus timestamp. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260929104015.1689921-1-wutengda@huaweicloud.com Fixes: b94bc80df648 ("tracing: Use a no_filter_buffering_ref to stop using the filter buffer") Signed-off-by: Tengda Wu Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit e8cfcd7e60eaa3b0dea4d71c64499604e7081736 Author: Amit Machhiwal Date: Fri Oct 9 22:05:56 2026 +0530 tracing: Do not initialize tracefs work if tracing is disabled commit b3b974008388ab59e44d764ba7a63c988fec2524 upstream. If trace buffer allocation fails during early boot (e.g. in early_trace_init() -> allocate_trace_buffers()), tracing_disabled is left set to 1 and the global trace array events list remains uninitialized. Later during boot, tracer_init_tracefs() (invoked via fs_initcall) queues tracerfs_init_work asynchronously without checking if tracing was disabled. When tracer_init_tracefs_work_func() runs, it calls event_trace_init() and init_tracer_tracefs(&global_trace, NULL) unconditionally. This leads to __find_event_file() dereferencing an uninitialized tr->events list, causing an early boot NULL pointer dereference Oops: BUG: Kernel NULL pointer dereference on read at 0x00000010 Faulting instruction address: 0xc000000000485be0 Oops: Kernel access of bad area, sig: 7 [#1] ... NIP [c000000000485be0] __find_event_file+0x70/0x3c0 LR [c000000000448874] init_tracer_tracefs+0x274/0xc80 Call Trace: init_tracer_tracefs+0x274/0xc80 tracer_init_tracefs_work_func+0x50/0x320 process_one_work+0x1e8/0x5c0 worker_thread+0x1dc/0x3d0 kthread+0x194/0x1b0 start_kernel_thread+0x14/0x18 Check tracing_disabled at the beginning of tracer_init_tracefs_work_func() and return immediately if tracing is disabled or failed to initialize, preventing the crash. Cc: stable@vger.kernel.org Fixes: 6621a7004684 ("tracing: make tracer_init_tracefs initcall asynchronous") Link: https://patch.msgid.link/20261009163557.88467-2-amachhiw@linux.ibm.com Reported-by: Michal Suchánek Closes: https://lore.kernel.org/all/arYskzbiaNzBR9MD@kunlun.suse.cz/ Signed-off-by: Amit Machhiwal Tested-by: Michal Suchánek Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit c43c41ec62ca54ae145aa4912c6692a26d625734 Author: Taeyang Lee <0wn@theori.io> Date: Fri Oct 16 02:19:55 2026 +0900 tracing: Check operator stack capacity before pushing commit c47a7b11bcb3d45e29723afcf6336866476b1d08 upstream. predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry. Cc: stable@vger.kernel.org Fixes: 39f7c41c908b ("tracing/filters: Enable filtering a cpumask field by another cpumask") Link: https://patch.msgid.link/atELO9L0I9kg5CpC@Taeyangs-MacBook-Pro.local Signed-off-by: Taeyang Lee <0wn@theori.io> Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 16d51e3ca46af1a990f71f255e76ec1e824bd452 Author: Donggeun Yoo Date: Wed Sep 16 09:27:35 2026 +0900 tracing: Fix the shift out of bounds in the log2 histogram modifier commit 647c2f97fcb94bc642cefe6db004999974563f06 upstream. The .log2 key modifier files a value under its base-2 order: # echo 'hist:keys=bytes_req.log2' > events/kmem/kmalloc/trigger hist_field_log2() computes that as ilog2(roundup_pow_of_two(val)). The out-of-line form of roundup_pow_of_two() is return 1UL << fls_long(n - 1); which shifts by 64 on a 64-bit kernel both when n is 0, where n - 1 wraps to ULONG_MAX, and when n is above 2^63. Both are ordinary keys, because the field fetch hands every value over as a u64: a syscall argument of 0 reaches the first, and one above 2^63 reaches the second. Keying sys_enter_lseek on offset.log2 and passing 0, 1, 2, 3, 1000, 2^63+1 and U64_MAX gives { offset: ~ 2^1 } hitcount: 1 { offset: ~ 2^10 } hitcount: 1 { offset: ~ 2^2 } hitcount: 1 { offset: ~ 2^0 } hitcount: 4 Keys above 2^63 land in the lowest bucket. With CONFIG_UBSAN_SHIFT=y the shift is also reported: UBSAN: shift-out-of-bounds in include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' __ubsan_handle_shift_out_of_bounds.cold+0xdd/0x1cb hist_fn_call.cold+0x8b/0xd9 event_hist_trigger+0x1cc/0x790 ftrace_syscall_enter+0x197/0x360 do_syscall_64+0x402/0x4b0 Use order_base_2(), which is ilog2(n - 1) + 1 for n > 1 and 0 below that. It returns what the old expression returned on every input the old one was defined for. Where it was not, 0 stays in bucket 0, which is where x86_64 had been putting it, and the keys above 2^63 move into bucket 64. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260916002735.808520-1-donggeunyoo.kernel@gmail.com Fixes: 4b94f5b7b4a5 ("tracing: Add hist trigger 'log2' modifier") Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit f9c0b333a5e44f734478ca8a7345f8b87d65ba7c Author: Jesse Zhang Date: Fri Oct 9 13:21:33 2026 +0800 drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr commit de9f6bcdb44f0e410031002e2f103826ea6b6259 upstream. amdgpu_debugfs_gpr_read() drops its runtime PM reference right after reading the wave registers. When copying them to userspace fails, it jumps to the err label, which drops the reference a second time. A read into a bad buffer on Navi31 either steals a reference somebody else holds (power/runtime_usage goes from 1 to 0) or underflows the count: amdgpu 0000:03:00.0: Runtime PM usage count underflow! The registers are already in the kernel buffer at that point, so finish the hardware access first and copy the buffer with a single copy_to_user() instead of the put_user() loop with its own error path. Fixes: 9eee152aab56 ("drm/amdgpu/debugfs: fix ref count leak when pm_runtime_get_sync fails") Reviewed-by: Alex Deucher Signed-off-by: Jesse Zhang Signed-off-by: Alex Deucher (cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 13c3cbfd0d1c840adca064225420ab22f58bb011 Author: Timur Kristóf Date: Wed Oct 7 00:02:52 2026 +0200 drm/amdgpu/sdma3: Work around POLL_REGMEM / FENCE hang commit 752480ad62964edf0254e151110d3e53a7cb37de upstream. SDMA can randomly hang on Polaris 10. Hard to reproduce, but has been occurring sporadically in the Mesa CI on the RADV Polaris 10 job even when Mesa isn't using the SDMA engine. When Mesa actually uses the SDMA on Polaris, the hang becomes more frequent and the reproduction rate goes up significantly in the CI system. We don't know why the hangs occur, but it seems that inserting a single NOP packet before each POLL_REGMEM and FENCE packet works around it. At the moment it's unclear which GPUs are affected, so let's apply this to SDMA 3.x for now. Note that this issue is not documented or acknowledged by AMD. Reviewed-by: Alex Deucher Signed-off-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit c343a27ed90823d08de125f7c447d96d056b75d9) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 77134cf996bab55683f0ceafb9e300d97ac046f8 Author: Yehyeong Lee Date: Wed Oct 7 10:58:42 2026 +0900 scsi: libiscsi: Validate the task named by a management response commit 11bffcd9cb346732eab2914ef44fe777a3f0b585 upstream. __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206 [ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020 [ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060 [ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 [ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800 [ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000 [ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0 [ 6.298712] PKRU: 55555554 [ 6.298713] Call Trace: [ 6.298714] [ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0 [ 6.298758] iscsi_complete_pdu+0x54/0xa0 [ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80 [ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.298804] __tcp_read_sock+0x1ab/0x810 [ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.298814] tcp_rcv_established+0x1f56/0x3a00 [ 6.298842] tcp_v4_do_rcv+0x449/0x960 [ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 Fixes: 7996a778ff8c ("[SCSI] iscsi: add libiscsi") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-4-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit ebb8c5ef2aabf66895253600e8390e8fc7094807 Author: Yehyeong Lee Date: Wed Oct 7 10:58:41 2026 +0900 scsi: libiscsi: Validate the ITT reflected in a Reject PDU commit c5958c770b2a0ee492414e26b07da9164a0d1f5d upstream. A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 Fixes: 8afa1439fcff ("[SCSI] libiscsi: handle immediate command rejections") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-3-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 6200fb2de579f268742a77b0f3d823cb0a8b1947 Author: Yehyeong Lee Date: Wed Oct 7 10:58:40 2026 +0900 scsi: libiscsi: Reject a negative task index from parse_pdu_itt commit 8ee2a09a1dbb257c9e828ad2497f8e4832dfb142 upstream. A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-2-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit e397d4da76bed72db6ac4a0848fb6217f8394dca Author: Yehyeong Lee Date: Mon Oct 5 21:35:54 2026 +0900 scsi: xen/scsifront: Check for a NULL shadow entry on a backend response commit 8c8222c255772713eb36cde695777a1fce224917 upstream. scsifront_do_response() validates the rqid in a backend response against VSCSIIF_MAX_REQS before using it to index info->shadow[], but then dereferences the entry to test ->inflight without checking that the slot is populated. Shadow slots are NULL before a command is submitted (the host private area is zeroed at allocation) and are reset to NULL in _scsifront_put_rqid() once a request completes, so an in-range rqid that does not correspond to an outstanding request makes the frontend dereference a NULL pointer. A malicious or buggy backend can thus crash the guest by returning a response whose rqid is in range but not in flight -- for example a spurious response before any command has been issued, or a duplicate of one already completed. The ring has only VSCSIIF_MAX_REQS (16) slots, so before the first command every in-range rqid selects a NULL slot. Reject a response whose shadow slot is not populated. Fixes: 6d1c2f48f3fc ("xen/scsifront: harden driver against malicious backend") Cc: stable@vger.kernel.org Signed-off-by: Yehyeong Lee Reviewed-by: Juergen Gross Link: https://patch.msgid.link/20261005123555.253995-1-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 995350c4f4097c19bdbbe9c627d2f978b16974db Author: Antoine Huret Date: Thu Oct 15 14:55:56 2026 +0200 perf: Update cgroup time when rotating multiplexed events commit e4c7c401c6b9174c0c893084fdaa6a84bd2520d7 upstream. Since commit bd2756811766 ("perf: Rewrite core context handling"), perf_rotate_context() only updates the context time before scheduling out the flexible events. It no longer updates the cgroup time, which ctx_sched_out() used to do. Cgroup events take their times from the per-cpu cgroup clock, so between two cgroup switches the rotations see a frozen clock. The events rotated out lose the running time they accumulated, and the next update, usually a read, credits the whole interval to the events that happen to be on the PMU at that moment. As a result, the time_running of multiplexed cgroup events is wrong, and so are their scaled counts, as long as no other cgroup runs on the CPU, e.g. a busy job alone on its CPUs. Counting cycles over one second of a busy loop in a cgroup gives from half to several times the max frequency of the CPU. Update the cgroup time before rotating the CPU context, as was done before the rewrite. Fixes: bd2756811766 ("perf: Rewrite core context handling") Closes: https://lore.kernel.org/r/PR3PR07MB69223331EED5BEBE150375B7849C2@PR3PR07MB6922.eurprd07.prod.outlook.com/ Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Antoine Huret Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261015-perf-cgroup-rotation-time-v1-1-93e177dfee5d@bull.com Signed-off-by: Greg Kroah-Hartman commit fb13353f0761d7c3e3f3533bf976dc202ba91c61 Author: Loic Poulain Date: Mon Oct 12 14:54:56 2026 +0200 i2c: qcom-cci: Fix HALT_ACK reset request being dropped commit 195f3d74b5de98969dc4fad956393bb00787efd1 upstream. A HALT_ACK interrupt indicates that the corresponding I2C master has entered the halted state and must be reset before further operation. The M0 and M1 HALT_ACK status bits may be asserted simultaneously in a single interrupt. However, the interrupt handler currently overwrites the reset mask when processing each HALT_ACK condition, causing the first reset request to be lost if both events are reported together. Accumulate reset requests instead of overwriting them so that both masters are properly reset when M0 and M1 HALT_ACK events occur in the same interrupt. Fixes: e517526195de4 ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Loic Poulain Cc: # v5.8+ Reviewed-by: Konrad Dybcio Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20261012-cci-fixes-v1-1-8cd4eb1fc5f9@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman commit 7e0d05a6234a984ac23b8a563fb7f66f2572b668 Author: Lee Jones Date: Tue Oct 13 11:24:48 2026 +0000 tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields commit a244c241593b5b38a08f0df2cb43c26574efbdcb upstream. In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). Cc: stable@vger.kernel.org Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces") Link: https://patch.msgid.link/20261013112449.1006088-1-lee@kernel.org Signed-off-by: Lee Jones Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 6440608024b008939137a13009f101bddab86049 Author: Sasha Levin Date: Sun Oct 11 18:33:33 2026 -0400 tools: gpio: fix building from the top level with O= commit 52336337f1a01ad803c7f3ddb23f40222e9ad58d upstream. "make O= tools/gpio" fails: Makefile:27: /tools/build/Makefile.include: No such file or directory tools/Makefile clears srctree, and the gpio Makefile only works it out again when building_out_of_srctree is not set, which the top-level Makefile sets for O= builds. Also work out srctree when it is empty, as tools/bpf/Makefile does since commit a89b2cbf71d64 ("tools, bpf: Fix build for 'make -s tools/bpf O='"). Fixes: 4a6a6f5c4aeed ("tools: gpio: Use !building_out_of_srctree to determine srctree") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Sasha Levin Link: https://patch.msgid.link/20261011223358.2327625-5-sashal@kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 994694a2d4611d7b76cf05ff401a92b1c0451e1f Author: Daehyeon Ko <4ncienth@gmail.com> Date: Wed Oct 7 12:57:39 2026 +0900 sctp: revalidate output stream after association connect wait commit b7ad72414c673ce1fa1f463e807cd4f34f8be9bf upstream. When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Acked-by: Xin Long Link: https://patch.msgid.link/20261007035739.3472432-1-4ncienth@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 1fccfbc553a63cab992e1bbbbe6b7ed876dbe82f Author: Mario Limonciello Date: Mon Oct 5 13:01:47 2026 -0500 pinctrl: amd: Clear S4 wake bits when firmware has _AEI commit 1cca81a683da7f0ef2fbaf34442376044cbbad22 upstream. Commit ffe8a0c6b552 ("pinctrl-amd: Don't clear S4 wake bits at probe") preserves firmware-programmed S4 wake sources because some PCIe devices rely on them for Wake-on-LAN. The system that motivated that change does not expose ACPI GPIO events through _AEI. On a Chuwi CoreBook Plus, firmware exposes _AEI but also leaves the S4/S5 wake bit set for GPIO 24. This causes the machine to power back on immediately after shutdown even though Wake-on-LAN is not enabled. GPIO register dumps show that the only relevant difference is bit 15 on GPIO 24. Clearing that bit makes the machine remain off. GPIO 24 is not itself listed in _AEI, so _AEI is not a per-pin indication of which pins the OS manages; it is a platform level signal of which wake model the firmware follows. Use that signal to decide what to clear. Continue clearing S0i3/S3 bits on every system. Clear S4 bits when firmware exposes _AEI, indicating that the platform hands GPIO events to the OS, but preserve S4 bits when _AEI is absent so that firmware-programmed sources such as PCIe PME that bypass the GPIO IRQ wake API keep working. A platform that exposes _AEI for some pins while routing a wake capable device through a raw GPIO not listed in _AEI would lose that wake source unless firmware re-arms it during the sleep transition. No such system has been reported. Fixes: ffe8a0c6b552 ("pinctrl-amd: Don't clear S4 wake bits at probe") Reported-by: Olzhas Marat Closes: https://bugzilla.kernel.org/show_bug.cgi?id=222041 Cc: stable@vger.kernel.org Tested-by: Olzhas Marat Reviewed-by: Shyam Sundar S K Signed-off-by: Mario Limonciello Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit a2fde862b98db8908e2ebaffbb35a75a0e9d5b33 Author: Aohan Mei Date: Sat Oct 3 09:34:07 2026 -0700 net: rds: fix uninitialized trans dereference in CM event handler commit 492ba6ac1b1ffb8a06ff52db0825c1af2cdb28c8 upstream. rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. Fixes: dcdede0406d3 ("RDS: Drop stale iWARP RDMA transport") Reported-by: TencentOS Corvus AI Link: https://lore.kernel.org/netdev/20260824111701.2979194-1-ljp1205831794@gmail.com/ Link: https://lore.kernel.org/netdev/20260825021223.3483044-1-ljp1205831794@gmail.com/ Cc: stable@vger.kernel.org Assisted-by: CodeBuddy:Kimi-K3 Signed-off-by: Aohan Mei [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] Assisted-by: LLM Signed-off-by: Allison Henderson Link: https://patch.msgid.link/20261003163408.250568-2-achender@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit fde33eb9955d819af282d5f5e84684eaec248291 Author: Jérémy Jean Date: Thu Oct 8 18:13:49 2026 +0000 net/sched: fix use-after-free in __tcf_action_put() commit 7b16eb911091aae237a8673da94e4dfb9cd21d54 upstream. __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock. Fixes: 16af6067392c ("net: sched: implement reference counted action release") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Jérémy Jean Reviewed-by: Simon Horman Link: https://patch.msgid.link/20261008181348.527035-2-Jeremy.Jean@oss.cyber.gouv.fr Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 5819018dc29fb2ac2fd4865d507f9893c89c0624 Author: Christian Brauner Date: Fri Oct 9 23:51:54 2026 +0200 eventfs: Free the eventfs_inode after an rcu grace period too commit 2cd88c498ecff8e22bf4c397b8eb226db70ac343 upstream. tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __kmalloc_cache_noprof+0x249/0x560 eventfs_create_dir+0x7a/0x590 event_create_dir+0x2fb/0xcf0 trace_add_event_call+0xbf/0x150 [...] Freed by task 11: kfree+0x1db/0x5b0 srcu_invoke_callbacks+0x3a3/0x620 process_one_work+0x937/0x1810 worker_thread+0x4f1/0xd60 Before commit 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") release_ei() used call_rcu(), which covered the walker, while eventfs_iterate() needs the SRCU grace period. Wait for both and chain call_rcu() from the SRCU callback. Cc: stable@vger.kernel.org Fixes: 8e556432477e ("eventfs: Use SRCU for freeing eventfs_inodes") Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-4-7446d2d335e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit d28a460a2237220d9ccbdd3baac6eaead44e96cb Author: Kyle Zeng Date: Fri Oct 2 05:59:02 2026 +0000 fsnotify: prevent mark additions during connector teardown commit 36ebddca56b9d8993d6dc984fdecc748ee1f5e06 upstream. fsnotify_destroy_marks() keeps a reference to its current mark while it drops conn->lock to destroy the mark. This stabilizes the forward-walk cursor, but does not prevent a new mark from being inserted before it. For example, an inotify watch re-added after IN_IGNORED sorts before the old, detached mark for the same group. The walk can miss the replacement and then detach the entire connector from the object. The replacement is still on its group's marks_list and, for inotify, in the watch IDR. The group mutex no longer protects the connector's object from disappearing. An unprivileged fdinfo read racing the final detach can consequently call igrab(NULL): BUG: KASAN: null-ptr-deref in igrab+0x24/0x100 Write of size 4 at addr 0000000000000148 Call Trace: igrab+0x24/0x100 inotify_show_fdinfo+0x1dc/0x5e0 seq_show+0x397/0x690 Set a DESTROYING flag under conn->lock before starting the walk, and reject new marks on that connector with -ENOENT. The existing add-mark error paths undo the temporary group-list entry and the backend's watch allocation. Do not wait for teardown while holding the group mutex, which the destroyer needs. Once the old connector is detached, an add can install a fresh connector as before. This closes the insertion race for all object types using the common connector teardown, without changing the mark reference or SRCU lifetime rules. Fixes: 6b3f05d24d35 ("fsnotify: Detach mark from object list when last reference is dropped") Cc: stable@vger.kernel.org Signed-off-by: Kyle Zeng Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 6a36b05fc5b3d660fcc826133dc92e2fc87bd1de Author: Amirmohammad Eftekhar Date: Thu Oct 1 14:43:54 2026 -0700 KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry commit c8f4cfe1cf93bce924e27f2abead7a4c4a487505 upstream. Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails in the "not from VM-Entry" case, i.e. when emulating RSM or handling KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM trying to run L1 with a nested MMU, and is especially problematic if the vCPU manages to free its nested state before the VM crashes. Constructing the root for a nested EPT MMU goes through vmcs12, which is dynamically allocated/freed when nVMX is enabled/disabled. And so if the nested state is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL pointer deref when attempting to get L1=>L2 EPTP. BUG: kernel NULL pointer dereference, address: 0000000000000078 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Call Trace: kvm_mmu_load+0xcd/0x870 [kvm] kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x9c/0x4d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47491b Modules linked in: kvm_intel kvm irqbypass CR2: 0000000000000078 ---[ end trace 0000000000000000 ]--- RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Cc: David Woodhouse Fixes: 72e9cbdb4338 ("KVM: nVMX: fix SMI injection in guest mode") Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: stable@vger.kernel.org Signed-off-by: Amirmohammad Eftekhar [sean: write changelog] Signed-off-by: Sean Christopherson Link: https://patch.msgid.link/20261001214356.3825100-2-seanjc@google.com Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 5d7687b0b71601cc32f1bfd62f56cf5eea3e5a07 Author: Christian Brauner Date: Fri Oct 9 23:51:56 2026 +0200 unicode: free the map after a grace period commit a96c5299bd7305eb984377681eb3222a57376405 upstream. generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone. Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-6-7446d2d335e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 35c2c4f3cf1403b058237c44000199a6c9a59273 Author: Sung Byeongchan Date: Thu Oct 8 02:35:42 2026 +0900 autofs: ignore notification errors from a replaced pipe commit 65676cd4203c0e41a94caf54080a7f0a95434bda upstream. autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed. Fixes: 8d7b48e0bc5fa ("autofs4: add miscellaneous device for ioctls") Cc: stable@vger.kernel.org Signed-off-by: Sung Byeongchan Link: https://patch.msgid.link/20261007173542.593624-1-tjdqudcks0424@naver.com Acked-by: Ian Kent Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 3caf006eb731e88cbb33fb5b7d1f2fdb23712bc7 Author: Haris Okanovic Date: Tue Oct 13 13:56:00 2026 -0500 perf: Fix perf_pmu_migrate_context() leaving events behind [ Upstream commit e76b36b4be7160eaa14b416681e548b125702395 ] __perf_pmu_remove() walks the group leaders of a CPU and PMU with perf_event_groups_for_cpu_pmu(), removing each one as it goes. perf_remove_from_context() takes the leader out of the groups rbtree, after which rb_next() on that node returns NULL, prematurely ending the walk. Other groups stay behind in the source context. On CPU hotplug, they are then torn down with the dying CPU. They keep running until teardown, while the PMU's interrupt and migrated events are on a new CPU, which drivers rely on never happening. Walk ctx->event_list instead and pick out the PMU's events by their pmu_ctx. Fixes: bd2756811766 ("perf: Rewrite core context handling") Signed-off-by: Haris Okanovic Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/20261013185603.1347265-2-harisokn@amazon.com Signed-off-by: Sasha Levin commit b5148fad7f9f65a9c346d2135484b7d82101ef48 Author: Peng Fan Date: Tue Oct 13 14:01:11 2026 +0800 gpio: mxc: fix wakeup_pads bit operations [ Upstream commit 170aeff46fb54f41545c85a72aec525aebc79d44 ] gpio_set_wake_irq() can be called concurrently for different pins on the same port. The writer-vs-writer race is the concern: two concurrent gpio_set_wake_irq() calls for different pins on the same port both do a non-atomic read-modify-write on the same wakeup_pads word. The old |= and &= compile to separate load/modify/store instructions that can interleave, losing one CPU's update. assign_bit() uses an atomic RMW instruction, so concurrent writers to different bits in the same word are safe. The reader side (for_each_set_bit in noirq_suspend, wakeup_pads > 0) runs in noirq context where no concurrent writer can execute, so reader atomicity is not needed. wakeup_pads is a u32, while assign_bit() operates on unsigned long pointers. On 64-bit platforms, this causes an 8-byte read-modify-write on a 4-byte field, corrupting the adjacent is_pad_wakeup. So change wakeup_pads to unsigned long and reorder to avoid wasting words. And fix the enable/disable path unconditionally sets/clears the wakeup_pads bit even when enable_irq_wake()/disable_irq_wake() fails. Only update the bit on success. Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms") Assisted-by: LLM Reviewed-by: Frank Li Signed-off-by: Peng Fan Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20261013-gpio-mxc-cleanup-v7-3-c4d769587d3e@nxp.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 5982563c56cad48a5793dcd6f16513ad74aa95e9 Author: Alexander Stein Date: Tue May 26 08:35:02 2026 +0200 gpio: mxc: use BIT() macro [ Upstream commit 9de94681ee48770ec7e2062451a572b557bf9298 ] Replace the open-code with the BIT() macro. Signed-off-by: Alexander Stein Reviewed-by: Frank Li Link: https://patch.msgid.link/20260526063504.25916-2-alexander.stein@ew.tq-group.com Signed-off-by: Bartosz Golaszewski Stable-dep-of: 170aeff46fb5 ("gpio: mxc: fix wakeup_pads bit operations") Signed-off-by: Sasha Levin commit 15c0dd095d19dad2e061d7c53753dc2a7ce609b2 Author: Peng Fan Date: Tue Oct 13 14:01:10 2026 +0800 gpio: mxc: fix both_edges bit operations [ Upstream commit b7719c575dec69146f6d537fd616b27083c0cf45 ] gpio_set_irq_type() can be called concurrently for different pins on the same port. The IRQ core serializes per irq descriptor, but different pins have different descriptors, so on SMP systems two concurrent gpio_set_irq_type() calls for pins on the same port run without mutual exclusion. The read-modify-write of port->both_edges is performed outside the port-wide scoped_guard(gpio_generic_lock_irqsave) section, so concurrent updates for different pins can overwrite each other, causing missed interrupts or stuck IRQ lines on dual-edge triggered pins. The original uniprocessor MXC SoCs were not affected; the race became reachable on multi-core i.MX7 and i.MX8 SoCs that reuse this driver. Convert both_edges from u32 to unsigned long and use set_bit(), clear_bit(), and test_bit() to make the modifications atomic. Fixes: 910862ec092c ("mxc: emulate GPIO interrupt on both-edges") Reviewed-by: Frank Li Signed-off-by: Peng Fan Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20261013-gpio-mxc-cleanup-v7-2-c4d769587d3e@nxp.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 1b5c5ae0218150574f826ed6d960e165566b8297 Author: Bartosz Golaszewski Date: Wed Jul 2 11:22:09 2025 +0200 gpio: mxc: use lock guards for the generic GPIO chip lock [ Upstream commit ba441322c7aac4735d78fc6781e497a01fb8eac7 ] Simplify the code by using lock guards for the bgpio_lock. Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20250702-gpio-mmio-rework-v2-2-6b77aab684d8@linaro.org Signed-off-by: Bartosz Golaszewski Stable-dep-of: b7719c575dec ("gpio: mxc: fix both_edges bit operations") Signed-off-by: Sasha Levin commit e29d0a00c619ac794b05d64f4438204478137365 Author: Joas Antonio dos Santos Date: Fri Oct 9 12:59:19 2026 -0300 calipso: keep BIG TCP payload_len in calipso_skbuff_setattr() [ Upstream commit 8070ed578b6b9134e045627fb745c887a806d46e ] calipso_skbuff_setattr() adjusts payload_len by the length of the option it inserts or resizes: payload = ntohs(ip6_hdr->payload_len); ip6_hdr->payload_len = htons(payload + len_delta); GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores payload_len == 0 for them; ipv6_payload_len() then falls back to skb->len. For such a packet forwarded to a destination mapped to CALIPSO, the code above writes len_delta (or 65536 + len_delta when shrinking) into payload_len, and ipv6_payload_len() no longer falls back to skb->len. nf_tables, conntrack and sch_cake rely on it. The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN, and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its real length back. Set payload_len from the skb length with ipv6_set_payload_len(), which stores 0 above IPV6_MAXPLEN and the real length otherwise, as ipv6_gro_complete() does. The network header was just reset to skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length. Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal mdp-generated policy (network_peer_controls=1), "netlabelctl calipso add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO DOI 16. calipso_skbuff_setattr() was called through netlbl_skbuff_setattr() from a test-only debugfs hook (not part of this patch) adding a level-only label; payload_len after the call: case before fix after fix real length 1000, unlabeled 1016 1016 1016 70000 GSO, payload_len 0 16 0 70016 65530 GSO, grows past MAXPLEN 10 0 65546 65540 GSO with a 24 byte hop header, shrinks below MAXPLEN 65528 65532 65532 1000 with a 24 byte hop header 992 992 992 (0 means ipv6_payload_len() returns the real length.) On the forward path, with a client injecting unlabeled UDP through a router to a server, the router adds the CALIPSO option and the server delivers all datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. Fixes: 81fbc812132c ("ipv6/gro: insert temporary HBH/jumbo header") Suggested-by: Eric Dumazet Suggested-by: Wang Zhan Signed-off-by: Joas Antonio dos Santos Assisted-by: Claude:claude-opus-5-5 Reviewed-by: Wang Zhan Acked-by: Paul Moore Link: https://patch.msgid.link/179156155963.36253.400481753322266658@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 2ef0ce6c8447015edd0cba03adaa23be2fe32169 Author: Alice Mikityanska Date: Thu Feb 5 15:39:14 2026 +0200 net/ipv6: Introduce payload_len helpers [ Upstream commit b2936b4fd56294e49d6c8e9152ea6c4982757c7d ] The next commits will transition away from using the hop-by-hop extension header to encode packet length for BIG TCP. Add wrappers around ip6->payload_len that return the actual value if it's non-zero, and calculate it from skb->len if payload_len is set to zero (and a symmetrical setter). The new helpers are used wherever the surrounding code supports the hop-by-hop jumbo header for BIG TCP IPv6, or the corresponding IPv4 code uses skb_ip_totlen (e.g., in include/net/netfilter/nf_tables_ipv6.h). No behavioral change in this commit. Signed-off-by: Alice Mikityanska Acked-by: Paolo Abeni Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260205133925.526371-2-alice.kernel@fastmail.im Signed-off-by: Jakub Kicinski Stable-dep-of: 8070ed578b6b ("calipso: keep BIG TCP payload_len in calipso_skbuff_setattr()") Signed-off-by: Sasha Levin commit e5aa07c62e4fda1206d314c9ea36d67cd6b95cad Author: Nicolai Buchwitz Date: Fri Oct 9 12:10:41 2026 +0200 net: bcmgenet: unshare the skb before writing the control block [ Upstream commit 89771ce4f8f67dcffae561b2ccac95c0f6e3aa01 ] bcmgenet stores first_cb, last_cb and bytes_sent in the skb control block and reads them back on completion to free the skb and credit BQL. ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit a shared skb that is still in the ring. The next transmit overwrites last_cb, so the earlier slots complete without crediting their bytes and BQL stalls the queue until the watchdog resets it. Unshare the skb before writing the control block. Reproduce with pktgen in clone_skb mode, which hands the driver the same skb while earlier copies are still in the ring: modprobe pktgen pg=/proc/net/pktgen echo "add_device eth0" > $pg/kpktgend_0 echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0 echo "dst 192.0.2.1" > $pg/eth0 echo "clone_skb 8" > $pg/eth0 echo "count 0" > $pg/eth0 echo start > $pg/pgctrl & sleep 5 echo stop > $pg/pgctrl wait cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at zero. Fixes: f48bed16a756 ("net: bcmgenet: Free skb after last Tx frag") Signed-off-by: Nicolai Buchwitz Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20261009-nb-genet-shared-skb-net-v1-1-c6d0a841977d@tipi-net.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 41a2f69f091b0765f17890d8ac04852c12f25cf6 Author: Kyle Zeng Date: Wed Oct 7 18:14:00 2026 -0700 netlink: avoid hashing the network namespace pointer [ Upstream commit f88bb3606e4bd11ee035b682cddc2999e604609a ] The netlink rhashtable key includes a raw struct net pointer and a user-controlled port ID. Both /proc/net/netlink and socket diagnostics expose the table's bucket order. By binding and rebinding chosen NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal buckets and recover the low bits of the Jenkins hash. Its 32-bit seed and the limited set of kernel-image slides can then be searched offline to recover the address of init_net. Use the namespace's unique, non-address net_cookie in the comparison key instead. It is assigned before the per-net initializers run and remains unchanged for the namespace's lifetime. The lookup key and object hash are still built by netlink_compare_arg_init(), keeping lookup, insertion, removal and rehashing consistent while preserving namespace separation. Neither public table walker needs to change. Reading the socket's namespace cookie in netlink_compare() is safe under RCU, including during namespace teardown. netlink_release() removes the socket from the hash table and defers its final put with call_rcu(). cleanup_net() runs the per-net exit methods and waits for outstanding RCU callbacks with rcu_barrier() before freeing namespace storage. Unlike ns.ns_id, net_cookie is also available and initialized during setup_net() in older stable kernels, making the change straightforward to backport to v5.15 and later. Fixes: c428ecd1a21f ("netlink: Move namespace into hash key") Assisted-by: LLM Signed-off-by: Kyle Zeng Reviewed-by: Simon Horman Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20261008011359.63727-2-kylebot@openai.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 6078a5369f9e8d22bb03b8890cb0bb47c91a5017 Author: Xingui Yang Date: Mon Sep 28 12:02:34 2026 +0800 scsi: libsas: Fix SMP IO deadlock during HA resume [ Upstream commit 81e097a064b28b4a1f6ca1a8b433e659c1bd64c0 ] smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result. Fixes: 3dbbbf656b850 ("scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race") Signed-off-by: Xingui Yang Reviewed-by: John Garry Link: https://patch.msgid.link/20260928040234.992912-1-yangxingui@huawei.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit 219aee17dd0234d45516caa27daa9dc1a2ed8455 Author: Martin Kaiser Date: Wed Oct 14 10:37:40 2026 +0200 tracing: probes: error if BTF is required but unavailable [ Upstream commit 66c658033d842bb75f81f20aaa4a378fe47be1a1 ] traceprobe_expand_meta_args expands probe arguments based on BTF info. Return an error if we have arguments that need expanding but BTF is not supported. The params variable is now unused, it can be removed. Link: https://lore.kernel.org/all/20261014083838.31020-1-martin@kaiser.cx/ Fixes: d157d7694460 ("tracing/probes: Support BTF field access from $retval") Signed-off-by: Martin Kaiser Reviewed-by: Steven Rostedt Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 94be790dd6fbe0912f35bb711bea8ef3687eaca9 Author: Kyle Zeng Date: Fri Oct 2 06:17:05 2026 +0000 pipe: preserve existing fasync readers on writer setup failure [ Upstream commit 40bb03d3ea6f6a915218508819ecc4d7a7fa260d ] F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before. Fixes: 76398425bb06 ("Move FASYNC bit handling to f_op->fasync()") Signed-off-by: Kyle Zeng Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 14d8fdf03fb7123f515e66896449f22ef2b4a393 Author: Sasha Levin Date: Sun Oct 11 18:33:42 2026 -0400 samples: pidfd: fix userprogs typo [ Upstream commit f1365f97fb7498d805981102eee22d362ae643f2 ] The Makefile adds pidfd-metadata to "usertprogs-always-y", which kbuild does not know, so the sample has not been built since the conversion to userprogs, even with CONFIG_SAMPLE_PIDFD=y. Fix the variable name. pidfd-metadata.c builds without warnings with gcc and clang for x86_64 and arm64. Fixes: 60fb0b1239719 ("samples: pidfd: build sample program for target architecture") Signed-off-by: Sasha Levin Link: https://patch.msgid.link/20261011223358.2327625-14-sashal@kernel.org Reviewed-by: Christian Brauner Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 403669041cb77bb5ffc5ce92bcfb49b2da3d989d Author: Cen Zhang Date: Sun Oct 11 23:35:06 2026 +0800 ocfs2/dlm: Protect the recovery list during debugfs reads [ Upstream commit 4c435828932bf46f29860e4a0375bcae101b778a ] Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.] Fixes: 007dce53a29c ("ocfs2/dlm: Dump the dlm state in a debugfs file") Signed-off-by: Cen Zhang Link: https://patch.msgid.link/pm-ocfs2-objects-candidate-0049-v3-184e46c47f5283f06191@gmail.com Reviewed-by: Joseph Qi Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 57b6ebcc83afb5338c561ff97ca85dc954a89136 Author: Linfeng Sun Date: Tue Aug 11 20:48:43 2026 +0800 scsi: target: iscsi: Fix race in discovery auth updates [ Upstream commit e15b81f602edbdee39c335546f25486a1747f3f0 ] Separate configfs opens can concurrently update the discovery AuthMethod parameter. Both callers may free the same value in iscsi_update_param_value(), causing a double-free. Protect the lookup and replacement with the discovery TPG access lock, as used by the other TPG configfs parameter updates. Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Signed-off-by: Linfeng Sun Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260811124843.6817-1-linfeng.sun.dev@gmail.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit d2c2fb020eb975d0589505d1b598c724cc4d38d2 Author: Laurence Oberman Date: Tue Oct 6 12:42:50 2026 -0400 scsi: st: Save the visited block for the partition the drive is in [ Upstream commit c9e9f024dd4f61f0f6636c9f2ed0830f87060e11 ] set_location() saves the current tape location before switching partitions, so that switch_partition() can return to it later. It reads the location with READ POSITION but stores it in the st_partstat of STp->partition, ignoring the partition the drive reports. The two differ after a device reset. When the reset is recovered with MTREW, MTSEEK or MTEOM, st_ioctl() sets STp->partition = 0 and calls switch_partition() to return to STp->new_partition. A drive that was in partition 1 is still there, so set_location() files the partition 1 position under partition 0. The next switch to partition 0 locates to that block: if partition 0 holds less data, MTSETPART fails with EIO (BLANK CHECK), otherwise the tape is silently positioned at the wrong block. IBM ULTRIUM-TD5 (LTO-5), LU reset in partition 1 at block 1025: st 12:0:0:0: [st0] Visited block 1025 for partition 0 saved. ... st 12:0:0:0: [st0] Setting block to 1025 and partition to 0. st 12:0:0:0: [st0] Error: 402, cmd: 2b 2 0 0 0 4 st 12:0:0:0: [st0] Sense Key : Blank Check [current] st 12:0:0:0: [st0] Add. Sense: End-of-data detected Store the location in the st_partstat of the partition reported by READ POSITION. With the fix: st 12:0:0:0: [st0] Visited block 1025 for partition 1 saved. This is a pre-existing issue. It was not caught when testing the recent st reset series because the partition test was only run on scsi_debug: on the LTO drive it was skipped, since can-partitions is off in the test harness's stinit.conf, as is normal for LTO. scsi_debug hides the problem because its emulated tape returns to the beginning of partition 0 on an LU reset. It was found while validating a backport of that series to RHEL 9.8, when the partition tests were run on real hardware with can-partitions enabled. The same failure then reproduced on unmodified RHEL 9.8 and on upstream, and the fix makes the test pass on v7.3-rc3 and RHEL 9.8 with an LTO-5. The harness (https://gitlab.com/loberman/tapetest, test X03) now refuses to silently skip the partition tests on hardware. Fixes: 7081dc75df79 ("scsi: st: Restore some drive settings after reset") Assisted-by: Claude Signed-off-by: Laurence Oberman Link: https://patch.msgid.link/20261006164250.773840-1-loberman@redhat.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit 9761f8170744037257adc77685f96c387eda53f8 Author: Keith Busch Date: Tue Sep 22 08:34:16 2026 -0700 nios2: fix __wsum type degradation in csum_fold() [ Upstream commit b963f2345fa20417401c51a69dedb6a58eea33a9 ] csum_fold() shifts a bitwise __wsum type, which sparse reports as "restricted __wsum degrades to integer". Sparse only checks the body of a static inline once something instantiates it, so this went unnoticed until a recent block layer change added the first csum_fold() caller to a file built on this architecture. Force cast to a __u32 for the shift, as the other architectures do. Fixes: eea9507a69d6 ("nios2: Library functions") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202609222053.5gjiJjtb-lkp@intel.com/ Signed-off-by: Keith Busch Signed-off-by: Dinh Nguyen Signed-off-by: Sasha Levin commit 174c6a8735f42958912f0c313a773cee42858b12 Author: Carlos Jones Jr Date: Fri Oct 2 16:55:40 2026 +0800 spi: tegra114: assert CS GPIO for every transfer in a message [ Upstream commit 8980bc573ae2d2b9d86d76aeb86c76e1597070bf ] The driver provides its own transfer_one_message() and therefore drives the chip-select GPIO itself rather than through the SPI core. The GPIO is asserted only in the is_first_of_msg path of tegra_spi_setup_transfer_one(), but tegra_spi_transfer_end() deasserts it whenever a transfer has cs_change set. For a multi-transfer message whose earlier transfers request cs_change -- for example a register read that sends the address in one transfer and clocks the data back in the next -- the CS GPIO is released after the first transfer and never re-asserted, so the remaining transfers are clocked with chip-select inactive and the peripheral never drives the bus. This was observed with an ADIS16470 IMU (adis16475 driver), whose register read is a two-transfer, cs_change-framed exchange: a logic analyzer showed the data frame clocked with CS high, and the driver read 0 while the device drove 0x4056 on the wire. Re-assert the CS GPIO for every transfer so that multi-transfer messages keep chip-select active across the whole message. gpiod_set_value() is idempotent and polarity-aware, so this is a no-op for the first transfer and for messages that keep CS asserted throughout. Fixes: 63c1440596ff ("spi: tegra114: add support for gpio based CS") Signed-off-by: Carlos Jones Jr Link: https://patch.msgid.link/20261002085540.1625-1-carlosjr.jones@analog.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit ea0e0fc4c72f71bd6d8bf460bfe309b61c35b548 Author: Kyle Zeng Date: Tue Oct 6 15:42:32 2026 -0700 netlink: reset skb headers before unicast and multicast filtering [ Upstream commit 8bf659bd54e1f00e34cf5244b1d289c506fa47c0 ] Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code. Fixes: b1153f29ee07 ("netlink: make socket filters work on netlink") Assisted-by: LLM Signed-off-by: Kyle Zeng Link: https://patch.msgid.link/20261006224232.50724-1-kylebot@openai.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 847874bdbc7bf6168d3363903fb903f16e764cb3 Author: HyeongJun An Date: Thu Oct 8 22:09:52 2026 +0900 ASoC: nau8822: Fix the 128x oversampling switch bits [ Upstream commit 4db45fc1da3d62d0fa6e8f1e457ae92e8741ed07 ] The DAC and ADC 128x Oversampling Switches use bit 5 of R10 and R14. The NAU8822 datasheet register map puts DACOS and ADCOS at bit 3 of those registers. In R14, bit 5 is inside HPF[6:4], which the High Pass Cut Off control owns. So turning on ADC oversampling changes the high pass cut-off, and the oversampling bit cannot be set. In R10, bit 5 is reserved, so the DAC switch has no effect. Use bit 3 for both. Fixes: 1e3cb6c321be ("ASoC: nau8822: new codec driver") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-7-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 1ffc03f432bb74b6c8d7406961d3dd88b2181307 Author: HyeongJun An Date: Thu Oct 8 22:09:51 2026 +0900 ASoC: wm8978: Fix the 128x oversampling switch bits [ Upstream commit d0567ca9a2faa33efbe5ae84ef7b86423a93bffd ] The DAC and ADC 128x Oversampling Switches use bit 5 of R10 and R14. Table 66 of the WM8978 datasheet puts DACOSR128 and ADCOSR128 at bit 3 of those registers. In R14, bit 5 is inside HPFCUT[6:4], which the High Pass Cut Off control owns. So turning on ADC oversampling changes the high pass cut-off, and the oversampling bit cannot be set. In R10, bit 5 is reserved, so the DAC switch has no effect. Use bit 3 for both. Fixes: 823dba519122 ("ASoC: Fix broken bitfield definitions in WM8978") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-6-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 07bbe910ccc72dfee7811efb99e48bf28ef51afa Author: HyeongJun An Date: Thu Oct 8 22:09:50 2026 +0900 ASoC: max98371: Fix the Speaker DHT Min Volume bits [ Upstream commit f7934340c56a84fc1b246ebf6b2e806d775f3b54 ] Register 0x31 holds two 4-bit fields. The datasheet puts SPK_GAIN_MIN at bits 7:4 and DHT_VROT_PNT at bits 3:0. The Speaker DHT Min Volume and Speaker DHT Rotation Volume controls both use bits 3:0. So setting the minimum speaker gain changes the DHT rotation point, and SPK_GAIN_MIN cannot be set. Move Speaker DHT Min Volume to bits 7:4. Fixes: ca2cd6bc6663 ("ASoC: Add max98371 codec driver") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-5-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit ba5c27c9fa75160469899bdbc3354f47fd28c42d Author: HyeongJun An Date: Thu Oct 8 22:09:49 2026 +0900 ASoC: pcm3168a: Fix the DAC zero flag polarity bit [ Upstream commit b26edc925c1cfa0184cd270ed81d4833db045ce0 ] The DAC Zero Flag Polarity enum uses PCM3168A_DAC_ATSPDA_SHIFT, which is bit 6 of register 70. That bit is ATSPDA, the attenuation speed, which the DAC Volume Rate Multiplier enum already owns. The datasheet puts ZREV, the zero flag polarity, at bit 0. The header defines PCM3168A_DAC_ZREV_SHIFT for it, but nothing uses it. So changing the zero flag polarity changes the attenuation speed, and ZREV cannot be set. Use PCM3168A_DAC_ZREV_SHIFT. Fixes: a9b17a638af5 ("ASoC: pcm3168a: Add driver for pcm3168a codec") Link: https://www.ti.com/lit/ds/symlink/pcm3168a.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20261008130953.2446692-4-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 12d589f384c4d5f5aa251ce6fde6710c61cc14c4 Author: HyeongJun An Date: Thu Oct 8 22:09:48 2026 +0900 ASoC: cs42l52: Fix the NG Type Switch bit [ Upstream commit 8b08b98796d2da103f2432550c14a7c687e72080 ] The NG Type Switch enum selects between "Apply Specific" and "Apply All", which is the NGALL bit. The datasheet puts NGALL at bit 7 of the Noise Gate Control register. The enum uses bit 6, which is NG, the noise gate enable owned by the NG Enable Switch. cs42l52.h names it CS42L52_NG_ENABLE_SHIFT. cs42l56 has the same Noise Gate register and puts its NG All Switch at bit 7. So changing the noise gate type turns the noise gate on or off, and NGALL cannot be set. Use bit 7. Fixes: dfe0f98b8d2e ("ASoC: Add support for CS42L52 Codec") Link: https://statics.cirrus.com/pubs/proDatasheet/CS42L52_F2.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-3-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 677c0e9cbb19aa8338425d09740a7157f0c76a54 Author: HyeongJun An Date: Thu Oct 8 22:09:47 2026 +0900 ASoC: cs42l56: Put the Limiter Cushion control on the limiter register [ Upstream commit 203436d2aeb7093290459e344e1912a418a6ebfd ] The Limiter Cushion control writes bits 4:2 of the ALC Thresholds register. Those bits are ALCMIN, which the ALC MIN control owns. The datasheet puts CUSH at bits 4:2 of the Limit Thresholds Control register, next to LMAX, which the Limiter MAX control already uses. So setting the limiter cushion changes the ALC minimum threshold, and the cushion itself cannot be set. Use CS42L56_LIM_THRESHOLD_CTL. Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC") Link: https://statics.cirrus.com/pubs/proDatasheet/CS42L56_F2.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-2-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 4827c986f16d92a9d755ffa825bafa1f2b1d4a00 Author: Avi Weiss Date: Sun Oct 11 06:54:59 2026 +0300 ASoC: stm32: spdifrx: fix synchronization state check [ Upstream commit 0936bbd35a247665c64886135835faa3c3f4f29f ] The interrupt handler uses a logical AND to check whether SPDIFRX was in the SYNC state before clearing errors. Since both SYNC (1) and ENABLE (3) are nonzero, this also treats ENABLE as SYNC (and any other non-zero value that might be added). The logical && basically just converts this to check for != 0. So errors occurring while SPDIFRX is enabled cause the driver to retry synch instead of disconnecting the PCM stream. Fix is to change the logical && to equality (==) and only retry when exactly in sync state. Fixes: 0c93c291321f2 ("ASoC: stm32: spdifrx: retry synchronization in sync state") Signed-off-by: Avi Weiss Reviewed-by: Olivier Moysan Link: https://patch.msgid.link/20261011035459.2289403-1-thnkslprpt@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 41d5c47cf794910a43ecd527db1f2810268a6ceb Author: Sergey Tiraspolsky Date: Sat Oct 10 03:37:53 2026 -0700 ASoC: Intel: avs: Reset the stream unless it is already prepared [ Upstream commit f6be9f558a83fe30a03bd3adae461c821a0cef8c ] Commit cfca1637bc2b ("ASoC: Intel: avs: Unprepare a stream when XRUN occurs") resets the HDA stream when ->prepare() is called in the XRUN state. User space does not always recover that way. PipeWire's ALSA backend recovers from an underrun with snd_pcm_drop(), snd_pcm_prepare() and a new start, so ->prepare() runs in the SETUP state, hdac_stream->prepared is still set and the reset is skipped. Every recovery attempt then fails the same way: spa.alsa: hw:avsmax98927,1p: snd_pcm_avail after recover: Broken pipe On a Google Pixelbook (Kaby Lake, max98927 speakers) this happens after an occasional underrun during normal playback and silences the speakers for one to four minutes, until the PCM is closed. It can be provoked by stopping PipeWire with SIGSTOP for 0.5 s during playback: in one run that single underrun led to 1297 failed recoveries over two minutes, until the sink was suspended. A plain alsa-lib program that recovers with snd_pcm_drop() and snd_pcm_prepare() hits the same loop, while snd_pcm_prepare() straight from XRUN recovers at once. Skip the reset only when the stream is already PREPARED, the repeated ->prepare() case the check exists for, and reset it otherwise. With this change both kinds of recovery succeed with a single restart. Fixes: cfca1637bc2b ("ASoC: Intel: avs: Unprepare a stream when XRUN occurs") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Sergey Tiraspolsky Acked-by: Cezary Rojewski Link: https://patch.msgid.link/20261010103753.16969-1-stiraspo@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e677eda15df7d5ce256654343418043c7ffd6f9b Author: Allison Henderson Date: Sat Oct 3 09:34:08 2026 -0700 net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure [ Upstream commit 98d446b7c013254a8a7b49720557676a3a851fde ] rds_rdma_cm_event_handler_cmn() hands the return value of rdma_resolve_route() straight back to the rdma_cm on RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM from the route work allocation, an SA query that cannot be set up, a RoCE route with no usable device - makes addr_handler() destroy the id the event was delivered on. That id is ic->i_cm_id, and nothing clears the pointer: the connection sits in RDS_CONN_CONNECTING with a freed id until its shutdown calls rdma_disconnect() and rdma_destroy_id() on it. The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect() forces a zero return while ic->i_cm_id == cm_id, as the comment there explains. Do the same here - drop the connection and return 0 - so the id stays RDS's to destroy from the shutdown, and the reconnect gets a fresh one. Fixes: 55b7ed0b582f ("RDS: Common RDMA transport code") Assisted-by: LLM Signed-off-by: Allison Henderson Link: https://patch.msgid.link/20261003163408.250568-3-achender@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit deb972c7eea8d0bc3109c35c30a1c86d4939f811 Author: Michal Luczaj Date: Mon Oct 5 02:26:22 2026 +0200 vsock: treat TCP_CLOSING as once-established [ Upstream commit 4f6ac74fa594a918d41255c941256e1d51592d3b ] Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Hyunwoo Kim Link: https://lore.kernel.org/netdev/anzT1fREOSyHT99k@v4bel/ Signed-off-by: Michal Luczaj Reviewed-by: Stefano Garzarella Link: https://patch.msgid.link/20261005-vsock-connect-reset-closing-v4-1-15d41cfda3ed@rbox.co Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 86ef8cec3e105dc0b65e72a206d2732012a6ff77 Author: Adriel Santos Date: Fri Oct 2 13:09:58 2026 -0300 pinctrl: qcom: ipq5018: replace gcc_plltest with pwm2 on gpio12 [ Upstream commit 709ba1c547eaf37da36ded2ecf3ea4e304cdfa9a ] The pingroup table has gcc_plltest at function 5 of gpio12 and does not offer pwm2 on that pin, so the pinmux core rejects a request for pwm2 on gpio12 as an invalid group. On the hardware, function 5 of gpio12 carries the PWM2 output: the Xiaomi AX3000T v2 drives its blue status LED from PWM2 on gpio12. The vendor kernel shipped on that router (Linux 4.4, stock firmware 2.0.28) has pwm2 in this slot. Its pingroup table, as read from the firmware image, lists these functions for gpio12: gpio, blsp0_spi, blsp0_i2c, blsp1_uart0, _, pwm2, qdss_tracedata_a, _, _, _ and has pwm3 at function 4 of gpio13, matching commit c6c159fcdb4e ("pinctrl: qcom: ipq5018: add missing pwm3 function on gpio13"). Measured on the board: with gpio12 set to each of the 16 function values in turn, and PWM2 held at 0% and then at 100% duty, the pad level read back from GPIO_IN follows PWM2 only at function 5. There it does not follow PWM channels 0, 1 or 3, and the LED switches with PWM2. Functions 4 and 7, which the table leaves empty, do not carry PWM2. Put pwm2 in function 5 of gpio12 and list gpio12 in pwm2_groups. Drop gpio12 from gcc_plltest_groups: none of its functions is gcc_plltest any more, and selecting it would trigger the WARN_ON() in msm_pinmux_set_mux(). Fixes: 725d1c891658 ("pinctrl: qcom: Add IPQ5018 pinctrl driver") Assisted-by: LLM Signed-off-by: Adriel Santos Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20261002160958.908424-1-adriel@adriel.eu Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 9ee4a57a9858a9a213a497d9db834618c4045752 Author: Svyatoslav Ryhel Date: Sat Sep 26 17:29:05 2026 +0300 power: supply: generic-adc-battery: Fix temperature IIO channel conversion [ Upstream commit 6bca94e64255053ab2aa56f2588fda73d399b790 ] Temperature IIO channel data is provided in milli-degrees, while POWER_SUPPLY_PROP_TEMP is expected to be in deci-degrees. Adjust the existing logic to reflect this conversion properly. Fixes: 33088c0513818 ("power: supply: generic-adc-battery: add temperature support") Signed-off-by: Svyatoslav Ryhel Link: https://patch.msgid.link/20260926142905.206215-2-clamor95@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 2cba0c8a7b158bc1701fa5d59441fc5d13f6894b Author: Gilberto Conde Date: Mon Sep 21 10:34:19 2026 +0100 pinctrl: qcom: ipq5018: add missing pwm3 function on gpio13 [ Upstream commit c6c159fcdb4e9a678eda0831f971e4a3a488ec47 ] GPIO13 supports the PWM3 function at mux select value 4, but the pingroup table leaves that slot empty and gpio13 is not listed in pwm3_groups. Selecting pwm3 on gpio13 is therefore rejected by the pinmux core: ipq5018-tlmm: invalid group "gpio13" for function "pwm3" The GL.iNet GL-X2000 drives its fan from PWM3 on this pin, and the vendor firmware muxes it with select value 4: gpio13 : out low func4 8mA no pull Add pwm3 to the fourth function slot of gpio13 and list gpio13 in pwm3_groups. With this the pin muxes as expected: pin 13 (GPIO_13): device 1941010.pwm function pwm3 group gpio13 Fixes: 725d1c891658 ("pinctrl: qcom: Add IPQ5018 pinctrl driver") Signed-off-by: Gilberto Conde Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260921093419.2870168-1-gilbertorconde@gmail.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 2e5ffbf1e41abbf6e02ce28115107938f55ff646 Author: Michael Kelley Date: Mon Aug 31 20:45:14 2026 -0700 Drivers: hv: Don't reset VMBus connection state on error/exit paths [ Upstream commit ec31dc39e835ccde0930daccece8c492d28282fc ] In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded. Reported-by: Sashiko Closes: https://lore.kernel.org/linux-hyperv/20260805205806.B5AC31F000E9@smtp.kernel.org/ Fixes: 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback") Signed-off-by: Michael Kelley Signed-off-by: Wei Liu Signed-off-by: Sasha Levin commit f561392afb44a8a42c54c1cfd3f33dace0b50537 Author: Waiman Long Date: Sun Aug 30 19:41:24 2026 -0400 Drivers: hv: Avoid infinite retry loop in init_vp_index() [ Upstream commit 32ea0a33e3a0fb7c10c601b43e1b2f6c06a3f5fd ] There is a retry loop in init_vp_index() where the CPUs from a certain node are stripped out if they have already been in the allocated cpumask or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no CPU left, the allocated cpumask is ignored and the process is retried again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns out not to contain any CPU in that particular node, that will become an infinite retry loop. This particular problem was reported by sashiko [1]. This should rarely happen, but we still need to guard against this. Fix this infinite loop problem by also skipping NUMA node that has no housekeeping CPU in the inner while loop of init_vp_index(). Also update the early abort check to check for the absence of online housekeeping CPUs instead of just the emptiness of the cpumask. As the outer for loop will only be reached if the housekeeping cpumask has at least one online CPU, a NUMA node with housekeeping CPUs will eventually be found. Link: https://sashiko.dev/#/message/20260422030903.E1BFCC2BCB0%40smtp.kernel.org [1] Fixes: 6640b5df1a38 ("Drivers: hv: vmbus: Don't assign VMbus channel interrupts to isolated CPUs") Signed-off-by: Waiman Long Reviewed-by: Michael Kelley Signed-off-by: Wei Liu Signed-off-by: Sasha Levin commit 4643aead9c9204c1da7b4e42fb25e813fbd5f258 Author: Xueqin Luo Date: Tue Sep 1 15:29:54 2026 +0800 power: supply: ds2780: Fix ds2780_get_capacity() returning raw value [ Upstream commit a58cbc8b36ec0cd00d2ba3de7d003de818a27523 ] ds2780_get_capacity() returns the raw register value instead of 0 on success. The capacity is already stored in *capacity, so the function should return 0 to indicate success. Fixes: 275ac74629c4 ("w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC support") Signed-off-by: Xueqin Luo Link: https://patch.msgid.link/20260901072954.1953121-1-luoxueqin@kylinos.cn Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 47469a5602b65703497100f6347404cf65fa85ad Author: Karl Mehltretter Date: Wed Sep 9 08:46:23 2026 +0200 power: supply: Fix maintenance charge table kernel-doc [ Upstream commit 45d4af4e80a25881b6b75e8e34872c555c43a41d ] struct power_supply_maintenance_charge_table contains charge_safety_timer_minutes, but its kernel-doc describes safety_timer_minutes. This leaves the real member undescribed and adds a nonexistent member to the generated documentation. Use the member's actual name. Fixes: d72ce7d32478 ("power: supply: ab8500: Standardize maintenance charging") Assisted-by: LLM Signed-off-by: Karl Mehltretter Link: https://patch.msgid.link/20260909064623.90737-1-kmehltretter@gmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 0db8fdcfad51cff7c38411ceb40a23ec9f8a18b7 Author: Ojaswin Mujoo Date: Fri Oct 16 15:20:18 2026 -0400 ext4: fallback to complex scan if aligned scan doesn't work [ Upstream commit 1f6bc02f18489b9c9ea39b068d0695fb0e4567e9 ] Currently in case the goal length is a multiple of stripe size we use ext4_mb_scan_aligned() to find the stripe size aligned physical blocks. In case we are not able to find any, we again go back to calling ext4_mb_choose_next_group() to search for a different suitable block group. However, since the linear search always begins from the start, most of the times we end up with the same BG and the cycle continues. With large fliesystems, the CPU can be stuck in this loop for hours which can slow down the whole system. Hence, until we figure out a better way to continue the search (rather than starting from beginning) in ext4_mb_choose_next_group(), lets just fallback to ext4_mb_complex_scan_group() in case aligned scan fails, as it is much more likely to find the needed blocks. Signed-off-by: Ojaswin Mujoo Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/ee033f6dfa0a7f2934437008a909c3788233950f.1702455010.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o Fixes: 83e80a6e3543 ("ext4: use buckets for cr 1 block scan instead of rbtree") Signed-off-by: Hamza Mahfooz Signed-off-by: Sasha Levin commit 90a7876e83118dedd8923e541d14133de6977cd1 Author: Abdul Wasey Date: Mon Oct 19 11:15:51 2026 +0000 mptcp: move the OoO check back into __mptcp_try_fallback() The 6.6.y backport of upstream commit 1bba3f219c5e ("mptcp: do not fallback when OoO is present") put the out-of-order queue check in __mptcp_finish_join() instead of __mptcp_try_fallback(). So the fix itself is missing, as fallback still happens with OoO data queued. Worse, the passive side now refuses every MP_JOIN while its OoO queue is not empty, which is the normal state of a connection already sending data over more than one subflow. The joining subflow is reset, so such a connection can't add a new path, and a path that comes back after an outage can't rejoin while data is in flight. Move the check to __mptcp_try_fallback(), as upstream does. On this branch that function is in protocol.h. Tested on 6.6.159 in netns: 6 connections (5 uploading) over two paths, then a third endpoint added mid-transfer. Without this patch only the idle connection gets a subflow on the new path and the other 5 joins are reset. With it, all 6 join. Same result in 3 of 3 runs each. Fixes: 642561238c98 ("mptcp: do not fallback when OoO is present") Signed-off-by: Abdul Wasey Signed-off-by: Sasha Levin commit ee54f7b6cb4bed6e6c3634ac167779e49e4b0d6d Author: Keith Busch Date: Fri Oct 16 14:47:53 2026 -0400 blk-mq: reinsert cached request to the list [ Upstream commit b051bb6bf0a231117036aa607cadf55be8e63910 ] A previous commit removed an optimization out of caution for a scenario that turns out not to be real: all the "queue_exit" goto's are safe to reinsert the request into the cached_rq's plug list as they are either from a non-blocking path, or a successful merge that already holds the queue reference. This optimization is most needed for small sequential workloads that successfully merge into larger requests. Fixes: dc278e9bf2b9 ("blk-mq: pop cached request if it is usable") Suggested-by: Ming Lei Suggested-by: Christoph Hellwig Signed-off-by: Keith Busch Reviewed-by: Chaitanya Kulkarni Link: https://patch.msgid.link/20260526153531.2365935-1-kbusch@meta.com Signed-off-by: Jens Axboe Assisted-by: LLM [ Backport to 6.6.y: Reinsert with rq_list_add() on each of the three target preparation or merge exits; the target has a single cached_rq list and no shared queue_exit label. ] Signed-off-by: Artem Dinaburg Signed-off-by: Sasha Levin commit f122d9968d730c2e71d5e59d0d8b7d67acb5b3bb Author: Keith Busch Date: Fri Oct 16 14:47:52 2026 -0400 blk-mq: pop cached request if it is usable [ Upstream commit dc278e9bf2b9513a763353e6b9cc21e0f532954e ] When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. Fixes: b0077e269f6c1 ("blk-mq: make sure active queue usage is held for bio_integrity_prep()") Fixes: 7b4f36cd22a65 ("block: ensure we hold a queue reference when using queue limits") Signed-off-by: Keith Busch Link: https://patch.msgid.link/20260521190253.242065-1-kbusch@meta.com Signed-off-by: Jens Axboe Assisted-by: LLM [ Backport to 6.6.y: Pop a suitable request from the older cached_rq list before fallible preparation, then initialize it after preparation. The target has three preparation or merge exits; the following correction restores the request on each exit. ] Signed-off-by: Artem Dinaburg Signed-off-by: Sasha Levin