commit 924b4a879cbb75aef37c160b955b92f6894b11a4 Author: Greg Kroah-Hartman Date: Mon Jun 1 17:43:16 2026 +0200 Linux 6.6.142 Link: https://lore.kernel.org/r/20260528194928.941004471@linuxfoundation.org Tested-by: Ron Economos Tested-by: Miguel Ojeda Tested-by: Francesco Dolcini Tested-by: Brett A C Sheffield Tested-by: Pavel Machek (CIP) Tested-by: Peter Schneider Tested-by: Wentao Guan Tested-by: Florian Fainelli Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit cefa4265b11176c897a7d9e8e54d89e3701c5584 Author: Linus Torvalds Date: Thu May 28 11:45:41 2026 -0700 security/keys: fix missed RCU read section on lookup commit 43a1e3744548e6fd85873e6fb43e293eb4010694 upstream. Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. Reported-by: Nicholas Carlini Cc: David Howells Cc: Jarkko Sakkinen Cc: Paul Moore Cc: James Morris James Morris Cc: Serge E. Hallyn Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 105c6a594b3f5cdbf5632ae8819c414e0f78f890 Author: Tiezhu Yang Date: Fri May 22 15:05:07 2026 +0800 LoongArch: kprobes: Fix handling of fatal unrecoverable recursions [ Upstream commit 1c856e158fd34ef2c4475a81c1dc386329989938 ] KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that can not be safely recovered in kprobes. KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At this point, the architecture-specific single-step context is already active. Nested single-stepping would corrupt the state, as the kprobe control block (kcb) and hardware registers cannot safely store multiple levels of stepping state. KPROBE_REENTER means that a third-level recursion occurs when a probe is hit while the system is already handling a nested probe (second- level). The kcb only provides a single slot (prev_kprobe) to backup the state. When a third probe is hit, there is no more space to save the state without corrupting the first-level backup. Kprobes work by replacing instructions with breakpoints. In order to execute the original instruction and continue, it must be moved to a temporary "single-step" slot. Since there is no backup space left to set up this slot safely, the CPU would be forced to return to the same original breakpoint address, triggering an endless loop. Currently, the code only prints a warning and returns. This leads to an infinite re-entry loop as the CPU repeatedly hits the same trap and a "stuck" CPU core because preemption was disabled at the start of the handler and never re-enabled in this early return path. Fix the logic by: 1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent fatal recursions that cannot be safely recovered. 2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This aligns LoongArch with other architectures (x86, arm64, riscv) and prevents stack overflow while providing diagnostic information. Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen Signed-off-by: Sasha Levin commit 1f9c828556416fbe3f49386708ce999fc4d4da06 Author: Sabrina Dubroca Date: Wed May 20 22:44:42 2026 +0200 net: gro: don't merge zcopy skbs [ Upstream commit 4db79a322db8c97f7b73b8a347395ef4d685eb40 ] skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs. Fixes: 753f1ca4e1e5 ("net: introduce managed frags infrastructure") Reported-by: Huzaifa Sidhpurwala Signed-off-by: Sabrina Dubroca Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit f504118252af7be07039cdc1643a5c5f5dab4dd0 Author: Nikhil P. Rao Date: Wed May 20 20:58:42 2026 +0000 pds_core: ensure null-termination for firmware version strings [ Upstream commit 3d4432d34c1992701289cbe12df9fd024f315998 ] The driver passes fw_version directly to devlink_info_version_stored_put() without ensuring null-termination. While current firmware null-terminates these strings, the driver should not rely on this behavior. Add explicit null-termination to prevent potential issues if firmware behavior changes. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d3f3d6fa0cad8193f049e5b65d9e9cb2cbdb1b4c Author: Su Hui Date: Thu Oct 19 16:33:52 2023 +0800 pds_core: add an error code check in pdsc_dl_info_get [ Upstream commit a1e4c334cbc9a80578c3784f8a3e7076bb19578d ] check the value of 'ret' after call 'devlink_info_version_stored_put'. Signed-off-by: Su Hui Reviewed-by: Shannon Nelson Link: https://lore.kernel.org/r/20231019083351.1526484-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski Stable-dep-of: 3d4432d34c19 ("pds_core: ensure null-termination for firmware version strings") Signed-off-by: Sasha Levin commit 01f7f893d5e1baae995beeb86cd0f3e6bb2a3b01 Author: Aditya Garg Date: Tue May 19 22:15:53 2026 -0700 net: mana: validate rx_req_idx to prevent out-of-bounds array access [ Upstream commit b809d0409991b75a6cff846a5ac27c3062953f84 ] In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3dee2fe0c8184e6062b371e12033921efdff9ec9 Author: Richard Fitzgerald Date: Thu May 21 13:30:57 2026 +0100 ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove() [ Upstream commit 18e7bd9f2446664053f8c34b72abd4606d22d858 ] Use flush_work() instead of cancel_work_sync() to terminate pending IRQ work in cs35l56_sdw_remove(). And flush_work() again after masking the interrupts to flush any queueing that was racing with the masking. This is the same sequence as cs35l56_sdw_system_suspend(). cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering- down before the interrupt status can be read and handled. The work releases this pm_runtime. So cancelling it, instead of flushing, could leave an unbalanced pm_runtime. Signed-off-by: Richard Fitzgerald Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d798b25c24f402c4d940f58ad94dae3dafe4e6f4 Author: Bartosz Golaszewski Date: Thu May 21 10:42:16 2026 +0200 gpio: cdev: check if uAPI v2 config attributes are correctly zeroed [ Upstream commit 3e6ccd790ed69bedd3d9626d01dd35cf9821c121 ] We check the padding of other uAPI v2 structures but not that of line config attributes. For used attributes: check if their padding is zeroed, for unused: check if the entire structure is zeroed. Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reviewed-by: Kent Gibson Link: https://patch.msgid.link/20260521-gpio-cdev-attr-padding-check-v3-1-ec3bcbe2e358@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 0f1fd5e83f0b418db5e4a132a3deb5e0ded6891b Author: Andy Shevchenko Date: Sun Nov 10 22:16:15 2024 +0200 gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) [ Upstream commit e106b1dd38e723ec2bb2bf57ea9b2aff464b9423 ] Use the mem_is_zero() helper where possible. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20241110201706.16614-1-andy.shevchenko@gmail.com Signed-off-by: Bartosz Golaszewski Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed") Signed-off-by: Sasha Levin commit cd87492b79d14893a6e078747ff79643d49bba7c Author: Jani Nikula Date: Wed Aug 14 13:00:34 2024 +0300 string: add mem_is_zero() helper to check if memory area is all zeros [ Upstream commit 3942bb49728ad9e1f94d953a88af169a8f5d8099 ] Almost two thirds of the memchr_inv() usages check if the memory area is all zeros, with no interest in where in the buffer the first non-zero byte is located. Checking for !memchr_inv(s, 0, n) is also not very intuitive or discoverable. Add an explicit mem_is_zero() helper for this use case. Reviewed-by: Kees Cook Reviewed-by: Andy Shevchenko Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-1-jani.nikula@intel.com Signed-off-by: Jani Nikula Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed") Signed-off-by: Sasha Levin commit c9ea01768903ae47f210cd457af1dead6de7a9c3 Author: Xingwang Xiang Date: Sun May 17 23:56:26 2026 +0900 bpf, skmsg: fix verdict sk_data_ready racing with ktls rx [ Upstream commit ddf8029623a1af20e984c040e89ff918158397ab ] sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg(). Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program") Signed-off-by: Xingwang Xiang Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 40fc66218ad12222385de71e71bac0ef5e9f82a4 Author: Rosen Penev Date: Sat May 16 14:26:16 2026 -0700 net: ag71xx: check error for platform_get_irq [ Upstream commit e7c70bf97e90d974cd575e4c90f8f9b07d056da3 ] Complete error handling for a failed platform_get_irq() call Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Rosen Penev Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20260516212616.11758-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2a1905730e0c771b999906a7b509722f795563c6 Author: Jiajia Liu Date: Mon May 18 10:24:02 2026 +0800 Bluetooth: btmtk: fix urb->setup_packet leak in error paths [ Upstream commit dd1dda6b8d6e1f4376a5b3055a04f0ecbdb4d6bd ] The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths. Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jiajia Liu Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit f0457842215438786e2e205ad06a4fbb8ab63cd0 Author: Chris Lu Date: Thu Jul 4 14:01:13 2024 +0800 Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c [ Upstream commit d019930b0049fc2648a6b279893d8ad330596e81 ] Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element defined in btmtk.h Signed-off-by: Sean Wang Signed-off-by: Chris Lu Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: dd1dda6b8d6e ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths") Signed-off-by: Sasha Levin commit 73377cf3056ad72b10df90f54ce6b9822057bc66 Author: Chris Lu Date: Thu Jul 4 14:01:11 2024 +0800 Bluetooth: btmtk: rename btmediatek_data [ Upstream commit d3e6236053958a8f1c7c7a885d9cecdd383e4615 ] Rename btmediatek_data to have a consistent prefix throughout the driver. Signed-off-by: Sean Wang Signed-off-by: Chris Lu Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: dd1dda6b8d6e ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths") Signed-off-by: Sasha Levin commit aa58d8366269e7b19c75de368028dd34fb442803 Author: Hao Qin Date: Wed May 15 16:15:19 2024 -0700 Bluetooth: btusb: mediatek: refactor the function btusb_mtk_reset [ Upstream commit 4c0c28f2bbec0c51395fd1f13c697da67483964b ] Extract the function btusb_mtk_subsys_reset from the btusb_mtk_reset for the future handling of resetting bluetooth controller without the USB reset. Co-developed-by: Sean Wang Signed-off-by: Sean Wang Signed-off-by: Hao Qin Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: dd1dda6b8d6e ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths") Signed-off-by: Sasha Levin commit b748250d778e575ef1a0e09939bd1366ee9b6bbf Author: Sean Wang Date: Wed May 15 16:15:17 2024 -0700 Bluetooth: btmtk: add the function to get the fw name [ Upstream commit 00f993fdec06c8f036a1b9c8ee6b004c17143bd1 ] Include a shared function to get the firmware name, to prevent repeating code for similar chipsets. Signed-off-by: Sean Wang Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: dd1dda6b8d6e ("Bluetooth: btmtk: fix urb->setup_packet leak in error paths") Signed-off-by: Sasha Levin commit e91687643c440ca3997d67646e6f80b92edc6703 Author: David Carlier Date: Fri May 8 20:57:47 2026 +0100 tracing: Avoid NULL return from hist_field_name() on truncation [ Upstream commit 576ec047d20b368b43c4d5db98c4f2e0f3c101ec ] hist_field_name() returns "" everywhere except the fully-qualified VAR_REF/EXPR case, where snprintf() truncation returns NULL early and bypasses the bottom NULL->"" guard. Callers don't expect NULL: strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758 and the strcmp() in the sort-key match loop at :4804 both deref it. system and event_name are bounded by MAX_EVENT_NAME_LEN, but the field name on a VAR_REF is kstrdup'd from a histogram variable name parsed out of the trigger string and has no length cap, so a long enough var name in a fully qualified reference can reach the truncation path. Keep the length check but leave field_name as "" on overflow. Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com Fixes: 5ec1d1e97de1 ("tracing: Rebuild full_name on each hist_field_name() call") Signed-off-by: David Carlier Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin commit 8ba1c4ddbb1c67d34bb440aecb9f5690ed3f64cb Author: Zhang Cen Date: Wed May 20 18:32:49 2026 +0800 ALSA: seq: Serialize UMP output teardown with event_input [ Upstream commit 60a1969fae6209644698fca91c185d153674f631 ] seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Suggested-by: Takashi Iwai Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device") Signed-off-by: Zhang Cen Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit e5604a4804879f00ca8052b498268b7f483a1a52 Author: Takashi Iwai Date: Tue Feb 27 09:53:00 2024 +0100 ALSA: seq: ump: Use guard() for locking [ Upstream commit 6487e363714c28c4b62ac149e7d907cfeeedb3ad ] We can simplify the code gracefully with new guard() macro and co for automatic cleanup of locks. Only the code refactoring, and no functional changes. Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20240227085306.9764-19-tiwai@suse.de Stable-dep-of: 60a1969fae62 ("ALSA: seq: Serialize UMP output teardown with event_input") Signed-off-by: Sasha Levin commit b6d3d3816c67550be492b34bb38a8fec07643e46 Author: Peter Zijlstra Date: Sun Sep 17 13:24:21 2023 +0200 ptrace: Convert ptrace_attach() to use lock guards [ Upstream commit 5431fdd2c181dd2eac218e45b44deb2925fa48f0 ] Created as testing for the conditional guard infrastructure. Specifically this makes use of the following form: scoped_cond_guard (mutex_intr, return -ERESTARTNOINTR, &task->signal->cred_guard_mutex) { ... } ... return 0; Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Oleg Nesterov Link: https://lkml.kernel.org/r/20231102110706.568467727%40infradead.org Stable-dep-of: 60a1969fae62 ("ALSA: seq: Serialize UMP output teardown with event_input") Signed-off-by: Sasha Levin commit 60ef1675b652e912f3eb064767af4432393291fd Author: Nikhil P. Rao Date: Fri May 15 21:29:07 2026 +0000 pds_core: fix debugfs_lookup dentry leak and error handling [ Upstream commit dc416e32baaeb620b9809e9e25fc7b30889686e9 ] debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash. Fixes: bc90fbe0c318 ("pds_core: Rework teardown/setup flow to be more common") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3231aff8ab26111c54e630b1a200fc43a729dd14 Author: Nikhil P. Rao Date: Fri May 15 21:29:05 2026 +0000 pds_core: fix error handling in pdsc_devcmd_wait [ Upstream commit 0e46b6635b03d29807f810c3b415c4755a3f958d ] Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1900ca8acb92fbea8bf9abef9927c7fed03db7fc Author: Ido Schimmel Date: Sun May 17 15:11:21 2026 +0300 bridge: mcast: Fix a possible use-after-free when removing a bridge port [ Upstream commit 4df78ff02629c7729168f0696a7a2123c389818d ] When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/ Reported-by: Thomas Gleixner Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6e79715b7b8abf4fef23a66e162cd9dfcf683cce Author: Petr Machata Date: Thu Oct 23 16:45:37 2025 +0200 net: bridge: Flush multicast groups when snooping is disabled [ Upstream commit 68800bbf583f26f71491141e4b3c8582f9cfcbde ] When forwarding multicast packets, the bridge takes MDB into account when IGMP / MLD snooping is enabled. Currently, when snooping is disabled, the MDB is retained, even though it is not used anymore. At the same time, during the time that snooping is disabled, the IGMP / MLD control packets are obviously ignored, and after the snooping is reenabled, the administrator has to assume it is out of sync. In particular, missed join and leave messages would lead to traffic being forwarded to wrong interfaces. Keeping the MDB entries around thus serves no purpose, and just takes memory. Note also that disabling per-VLAN snooping does actually flush the relevant MDB entries. This patch flushes non-permanent MDB entries as global snooping is disabled. Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/5e992df1bb93b88e19c0ea5819e23b669e3dde5d.1761228273.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Stable-dep-of: 4df78ff02629 ("bridge: mcast: Fix a possible use-after-free when removing a bridge port") Signed-off-by: Sasha Levin commit 00904a73272b9f3ef3952fe69a833909dccad1ef Author: Guangshuo Li Date: Thu May 14 19:38:34 2026 +0800 RDMA/rtrs: Fix use-after-free in path file creation cleanup [ Upstream commit 5b74373390113fba798a76b483837029ab010fef ] In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. Fixes: ae4c81644e91 ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path") Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit a7685f4d90c1574085e5aa0a65d0fdbf1c2249c0 Author: Rafael J. Wysocki Date: Tue May 12 17:16:22 2026 +0200 platform/x86: intel-vbtn: Check ACPI_HANDLE() against NULL [ Upstream commit a9f305c5a355efeb240d406d378491d9eec02d07 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-vbtn driver. Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 527a7990e663f99405235667c0f373f2c031a49e Author: Rafael J. Wysocki Date: Tue May 12 17:13:28 2026 +0200 platform/x86: intel-hid: Check ACPI_HANDLE() against NULL [ Upstream commit 5c69e090ae5dd93d910f70db0796357080707d26 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-hid driver. Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 6ea1690b24e93af238cd912f0c35e288a3d43b88 Author: Rafael J. Wysocki Date: Tue May 12 17:12:40 2026 +0200 platform/x86: hp_accel: Check ACPI_COMPANION() against NULL [ Upstream commit abfbe5ee8ae89f1f5449790423d5dd3e423545bd ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 hp_accel driver. Fixes: 8ebcb6c94c71 ("platform/x86: hp_accel: Convert to be a platform driver") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 32ba2ce2b15f549be4effddf348367eda01d2f71 Author: Rafael J. Wysocki Date: Tue May 12 17:11:49 2026 +0200 platform/x86: adv_swbutton: Check ACPI_HANDLE() against NULL [ Upstream commit e7a9a6ea40e352cd7977f6a8c80bdeadf65ad838 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 adv_swbutton driver. Fixes: 3d904005f686 ("platform/x86: add support for Advantech software defined button") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 566f42fb67a7ebfed6650e407e5b72e6b3e83bf7 Author: Erni Sri Satya Vennela Date: Thu May 14 12:41:51 2026 -0700 net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer [ Upstream commit 35f0f0a2536a4d604b4dbad92c85c4a8fdebb870 ] In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Erni Sri Satya Vennela Link: https://patch.msgid.link/20260514194156.466823-1-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 314a94c47d283d11634e8335f87b1cfa1cf3fbf0 Author: Daniel Golle Date: Thu May 14 15:04:35 2026 +0100 net: dsa: mt7530: preserve VLAN tags on trapped link-local frames [ Upstream commit 3ac85bcfd404b588298c95c6fba8aad4ad334f57 ] The BPC, RGAC1 and RGAC2 registers control the handling of link-local frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are correctly trapped to the CPU port, but the egress VLAN tag attribute was set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any VLAN tags from trapped frames before they reach the CPU. This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer Delay Requests) to arrive at the CPU without their VLAN tag, so they are delivered to the base network interface instead of the VLAN sub-interface. The DSA local_termination selftest confirms this: all link-local protocol tests on VLAN upper interfaces fail. Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default) so that the switch does not modify VLAN tags in trapped frames. This way VLAN-tagged frames retain their original tag and are delivered to the correct VLAN sub-interface, matching the behavior of non-trapped frames which pass through without VLAN tag modification. Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames") Signed-off-by: Daniel Golle Acked-by: Chester A. Unal Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 1bddf306212a1f7f09e167a2b5ca4f9b1019bca1 Author: Arınç ÜNAL Date: Mon Apr 22 10:15:11 2024 +0300 net: dsa: mt7530: rename mt753x_bpdu_port_fw enum to mt753x_to_cpu_fw [ Upstream commit 7603a0c7d2210a253265394b50567c64fbb977e4 ] The mt753x_bpdu_port_fw enum is globally used for manipulating the process of deciding the forwardable ports, specifically concerning the CPU port(s). Therefore, rename it and the values in it to mt753x_to_cpu_fw. Change FOLLOW_MFC to SYSTEM_DEFAULT to be on par with the switch documents. Signed-off-by: Arınç ÜNAL Signed-off-by: David S. Miller Stable-dep-of: 3ac85bcfd404 ("net: dsa: mt7530: preserve VLAN tags on trapped link-local frames") Signed-off-by: Sasha Levin commit d2be607d042d23072288e87e5782fd9ba8e5d0cd Author: Daniel Golle Date: Thu May 14 15:04:21 2026 +0100 net: dsa: mt7530: fix FDB entries not aging out with short timeout [ Upstream commit e824e40d0e841fab66ab7897d6c7b14dc81c66a7 ] The DSA forwarding selftests bridge_vlan_aware.sh and bridge_vlan_unaware.sh configure the bridge with ageing_time set to LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run learning_test() in lib.sh, which expects a learned FDB entry to be removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry persisted past the deadline and the "Found FDB record when should not" assertion failed. With msecs=10000, the algorithm in mt7530_set_ageing_time() finds AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the search from tmp_age_count=0). The per-entry aging counter is initialized to AGE_CNT when a MAC address is learned, so with AGE_CNT=0 new entries start with a counter value of 0, which the hardware treats as "already aged" and never removes, effectively disabling aging. Fix this by starting the search from tmp_age_count=1 to ensure entries always have a non-zero initial aging counter. For a 10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead: the timer ticks every 5 seconds and entries are removed after 2 ticks. Starting the search at AGE_CNT=1 raises the minimum representable ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time of 1 second would now make the loop fall through without setting age_count and age_unit, leaving them uninitialized when written to the MT7530_AAC hardware register. Set ds->ageing_time_min and ds->ageing_time_max so the DSA core validates the range before the callback is invoked, and drop the now-redundant range check from mt7530_set_ageing_time(). Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 69a0885079c97b4e961d04392aa331b9b44655a6 Author: Matthew Leach Date: Fri Apr 24 10:50:35 2026 +0100 wifi: ath11k: fix peer resolution on rx path when peer_id=0 [ Upstream commit 2a2451a34afdf563b3102d36a4b6cf335cf813e2 ] It has been observed that on certain chipsets a peer can be assigned peer_id=0. For reception of non-aggregated MPDUs this is fine as ath11k_dp_rx_h_find_peer() has a fallback case where it locates the peer based upon the source MAC address. On an aggregated link, the mpdu_start header is only populated by hardware on the first sub-MSDU. This causes the peer resolution to be skipped for the subsequent MSDUs and the encryption type of these frames to be set to an incorrect value, resulting in these MSDUs being dropped by ieee80211. ath11k_pci 0000:03:00.0: data rx skb 000000002f4b704d len 1534 peer xx:xx:xx:xx:xx:xx 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 1 last_msdu 0 ath11k_pci 0000:03:00.0: data rx skb 0000000038acd580 len 1534 peer (null) 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d00 fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 0 last_msdu 1 Remove the null peer_id checks in ath11k_dp_rx_h_find_peer() and ath11k_hal_rx_parse_mon_status_tlv(), allowing peers with an assigned ID of 0 to be resolved. Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9 Fixes: 2167fa606c0f ("ath11k: Add support for RX decapsulation offload") Reviewed-by: Baochen Qiang Signed-off-by: Matthew Leach Reviewed-by: P Praneesh Link: https://patch.msgid.link/20260424-ath11k-null-peerid-workaround-v4-1-252b224d3cf6@collabora.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 070e40acc59ef7bedba0314f59971ba87fcc8ab0 Author: Dmitry Baryshkov Date: Sat May 16 14:53:45 2026 +0300 drm/msm/snapshot: fix dumping of the unaligned regions [ Upstream commit 76824d2467feb1828b745d6add2541918d7be3da ] The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reported-by: Salendarsingh Gaud Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/725449/ Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit dd844b31f4eab4a35bce0703fbd947c9aeeb2a49 Author: Felix Gu Date: Sun May 10 01:55:37 2026 +0800 spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache() [ Upstream commit 496ba79b9496b8b3747cbc764ebd33ee7325e806 ] When DMA read times out in mtk_snand_read_page_cache(), the original code erroneously jumped to cleanup label which skips DMA unmapping and ECC disable, causing a resource leak. Fixes: 764f1b748164 ("spi: add driver for MTK SPI NAND Flash Interface") Signed-off-by: Felix Gu Link: https://patch.msgid.link/20260510-snfi-v1-1-bc375cf1af8e@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 5c54c482934b36ce40896d6a38c85f2e1741c8bf Author: Jeroen Massar Date: Wed May 13 09:33:02 2026 +0300 net/mlx5: Do not restore destination-less TC rules [ Upstream commit 8d0a5af8b1ba598e7340761729801624e7a9330e ] After IPsec policy/state TX rules are added, any TC flow rule, which forwards packets to uplink, is modified to forward to IPsec TX tables. As these tables are destroyed dynamically, whenever there is no reference to them, the destinations of this kind of rules must be restored to uplink, unless there is no destination for that rule. The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not have a destination port, and thus out_count = 0. At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests we call mlx5_eswitch_restore_ipsec_rule but as the above types do not have a destination we get an underflow of out_count, as the port is passed, which is esw_attr->out_count - 1. This change avoids calling mlx5_eswitch_restore_ipsec_rule when there are no output destinations and thus avoids the underflow. Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jeroen Massar Reviewed-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d65b279a1898ce3c2f84d6f25aa50bb6578181a7 Author: Chuck Lever Date: Wed May 13 08:58:25 2026 -0400 tls: Preserve sk_err across recvmsg() when data has been copied [ Upstream commit f508262ae9f21fe0e6c0749948b9dc7dd5a62a70 ] The sk_err check in tls_rx_rec_wait() consumes the error via sock_error(), which clears sk_err atomically. When the caller (tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already has bytes copied to userspace, it returns those bytes and discards the error from this call. sk_err is now zero on the socket, so the next read syscall observes only RCV_SHUTDOWN and reports a clean EOF instead of the actual error (typically -ECONNRESET). The race is reachable when tls_read_flush_backlog()'s periodic sk_flush_backlog() triggers tcp_reset() in the middle of a multi-record read. Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is false, consume sk_err via sock_error() as before. When has_copied is true, report the error from READ_ONCE() but leave sk_err set: the caller returns the byte count and discards the err from this call, and the next read syscall surfaces the preserved sk_err. This mirrors the tcp_recvmsg() preserve-and-surface pattern. The decrypt-abort path is unaffected: tls_err_abort() raises sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing on the caller's return path consumes it, so the EBADMSG surfaces on the next read. tls_sw_splice_read() passes has_copied=false: it processes one record per call, so no bytes have been copied within the function when tls_rx_rec_wait() runs. A reset that arrives between iterations of splice_direct_to_actor() (the sendfile() path) is still consumed by sock_error() in the later call, and the outer loop returns the prior iterations' byte count and drops the error. tcp_splice_read() exhibits the same pattern at the iteration boundary; addressing it belongs at the splice_direct_to_actor() layer and is out of scope here. Fixes: c46b01839f7a ("tls: rx: periodically flush socket backlog") Suggested-by: Jakub Kicinski Signed-off-by: Chuck Lever Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1822997aa8c2979f8a122d0333798ea9eec7b2ae Author: Juergen Gross Date: Tue May 5 12:24:17 2026 +0200 x86/xen: Fix xen_e820_swap_entry_with_ram() [ Upstream commit 28e03f78e69cf6628b81f24777799778528a84c1 ] When swapping a not page-aligned E820 map entry with RAM, the start address of the modified entry is calculated wrong (the offset into the page is subtracted instead of being added to the page address). Fixes: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory") Reported-by: Jan Beulich Reviewed-by: Jan Beulich Signed-off-by: Juergen Gross Message-ID: <20260505102417.208138-1-jgross@suse.com> Signed-off-by: Sasha Levin commit 06cc5ad2c1127c6cffebddc8a3c26cf4440fd1f3 Author: Sven Schuchmann Date: Tue May 12 09:19:47 2026 +0200 net: phy: DP83TC811: add reading of abilities [ Upstream commit c78bdba7b9666020c0832150a4fc4c0aebc7c6ac ] At this time the driver is not listing any speeds it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT for DP83TC811. Add the missing call for phylib to read the abilities. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Suggested-by: Andrew Lunn Signed-off-by: Sven Schuchmann Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de [pabeni@redhat.com: dropped revision history] Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit d04494596b5e5bfc8b9026455333447c3b8b5347 Author: Oleksij Rempel Date: Tue Dec 12 06:41:43 2023 +0100 net: phy: c45: add genphy_c45_pma_read_ext_abilities() function [ Upstream commit 0c476157085fe2ad13b9bec70ea672e86647fa1a ] Move part of the genphy_c45_pma_read_abilities() code to a separate function. Some PHYs do not implement PMA/PMD status 2 register (Register 1.8) but do implement PMA/PMD extended ability register (Register 1.11). To make use of it, we need to be able to access this part of code separately. Signed-off-by: Oleksij Rempel Reviewed-by: Andrew Lunn Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20231212054144.87527-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Stable-dep-of: c78bdba7b966 ("net: phy: DP83TC811: add reading of abilities") Signed-off-by: Sasha Levin commit acdc12b71c9aa4be5dcd2c8062753c6d2033e235 Author: Jakub Kicinski Date: Mon May 11 10:49:18 2026 -0700 net: tls: prevent chain-after-chain in plain text SG [ Upstream commit ff26a0e8377dec07e4a7230db7675bed1b9a6d03 ] Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. Reported-by: Sashiko Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 131ef12057d92b77b636321b7849c69222405a97 Author: Jakub Kicinski Date: Mon May 11 10:49:17 2026 -0700 net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring [ Upstream commit 285943c6e7ca309bbea84b253745154241d9788a ] When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). Reported-by: 钱一铭 Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit d38ba387244e5c5f7db3e11ea98bc2c7beccb0c0 Author: Xiang Mei Date: Sun May 10 23:21:38 2026 -0700 net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot [ Upstream commit 277740023def559a4a2ddc3e8e784ee37a0f16a9 ] On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit a09d07ac45e283c9861a9ceea06f56d0ba851d22 Author: Sayali Patil Date: Wed May 13 13:44:13 2026 +0530 powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() [ Upstream commit 31467b23823ffec1f6fff407f8e3ca9af8b7491a ] A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. Fixes: cc15ff327569 ("powerpc/mce: Avoid using irq_work_queue() in realmode") Suggested-by: Mahesh Salgaonkar Acked-by: Shrikanth Hegde Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Sayali Patil [Maddy: Fixed the commit title] Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260513081413.222490-1-sayalip@linux.ibm.com Signed-off-by: Sasha Levin commit 7256e54583aee21e23929e7554278c2f5c1a08b1 Author: Mikko Perttunen Date: Tue Apr 21 13:02:38 2026 +0900 drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN [ Upstream commit 55e0f0d1c1a4ee1e46da7da4d443eb3044fb3851 ] Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Mikko Perttunen Patchwork: https://patchwork.freedesktop.org/patch/719685/ Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 567b5e976e2e15280d78c9ef2add1954a0bbb5b1 Author: Dmitry Baryshkov Date: Tue Apr 28 20:21:38 2026 +0300 drm/msm/dsi: don't dump registers past the mapped region [ Upstream commit 5b49a46baa853b26dbefa65c6c75dd9ff69f63d4 ] On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Fixes: bac2c6a62ed9 ("drm/msm: get rid of msm_iomap_size") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/721747/ Link: https://lore.kernel.org/r/20260428-msm-fix-dsi-dump-v1-1-5d4cb5ccfac7@oss.qualcomm.com Signed-off-by: Sasha Levin commit b40e10c72df58a0ee46fbb40e364910c2c4bad57 Author: Chenguang Zhao Date: Mon May 11 09:43:43 2026 +0800 ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics [ Upstream commit 3d042592ebd4c7e44974d556de0b727cb7db4dab ] ethnl_bitmap32_not_zero() should return true if some bit in [start, end) is set: - Fix inverted memchr_inv() sense: return true when the scan finds a non-zero byte, not when the middle words are all zero. - Return false for an empty interval (end <= start). - When end is 32-bit aligned, indices in [start, end) do not include any bits from map[end_word]; return false after earlier checks found no non-zero data. Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling") Signed-off-by: Chenguang Zhao Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 720c76b930c52cd58f50eb6b10569d03dccc7959 Author: Xiang Mei Date: Sun May 10 15:26:40 2026 -0700 net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint [ Upstream commit 7bf563badd37cb796df5477d2b78bb64148a1268 ] The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname) conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on these paths already handles this (e.g. !conn->lnk in SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first sendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64 The faulting address 0x3e0 is offsetof(struct smc_link, ibname), confirming the NULL ->lnk deref. Enabling the tracepoint requires root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has no capability check, and SMC-D negotiation needs no admin step on s390 or on x86 with the loopback ISM device loaded. Log an empty device name for SMC-D instead of dereferencing NULL. Fixes: aff3083f10bf ("net/smc: Introduce tracepoints for tx and rx msg") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Dust Li Reviewed-by: Sidraya Jayagond Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9baafc2fea096279e75480f93fd5942e8336b510 Author: Zack McKevitt Date: Thu Apr 30 12:39:01 2026 -0700 accel/qaic: Add overflow check to remap_pfn_range during mmap [ Upstream commit aa16b2bc0f02709919e2435f531406531e5bcc69 ] The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. Reported-by: Lukas Maar Fixes: ff13be830333 ("accel/qaic: Add datapath") Reviewed-by: Karol Wachowski Signed-off-by: Zack McKevitt Reviewed-by: Jeff Hugo [jhugo: fix braces from checkpatch --strict] Signed-off-by: Jeff Hugo Link: https://patch.msgid.link/20260430193858.1178641-1-zachary.mckevitt@oss.qualcomm.com Signed-off-by: Sasha Levin commit f775be13d342009a90cce51d2591184591249c20 Author: Lukas Bulwahn Date: Thu Feb 5 09:11:31 2026 +0100 HID: quirks: really enable the intended work around for appledisplay [ Upstream commit 5f90dcfa8dc32a488581b78e575cdd7808ba5c78 ] Commit c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") intends to add a quirk for kernels built with Apple Cinema Display support, but it refers to the non-existing config option CONFIG_APPLEDISPLAY, whereas the config option for Apple Cinema Display support is named CONFIG_USB_APPLEDISPLAY. Refer to the intended config option CONFIG_USB_APPLEDISPLAY in the ifdef directive. Fixes: c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") Signed-off-by: Lukas Bulwahn Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit a5db6a7c062f99f5ddf21a47c3650da05068fee4 Author: Nicolas Escande Date: Wed May 6 15:42:40 2026 +0200 wifi: ath11k: fix error path leak in ath11k_tm_cmd_wmi_ftm() [ Upstream commit 7320d6eb861e9913193a7801834c661381756a79 ] This is similar to what was fixed by previous patches. We have a call to ath11k_wmi_cmd_send() which does check the return value, but forgot to free the related skb on error. Fixes: b43310e44edc ("wifi: ath11k: factory test mode support") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-4-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 3d675896ea03aca631852a2a7e91e6cb8f664967 Author: Nicolas Escande Date: Wed May 6 15:42:38 2026 +0200 wifi: ath11k: fix error path leaks in some WMI WOW calls [ Upstream commit 55dda532bbc261aef495e403c8900c5e2ab5fa34 ] Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. Fixes: 79802b13a492 ("ath11k: implement WoW enable and wakeup commands") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit b77be98447c4c93f65d4d62a199991fa6288adcd Author: Ethan Nelson-Moore Date: Fri May 8 19:37:28 2026 -0700 net: ethernet: cs89x0: remove stale CONFIG_MACH_MX31ADS reference [ Upstream commit 36a8d04a8293afcb9304cf0cd3741f67698f2a1a ] The legacy ARM board file for MACH_MX31ADS was removed in commit c93197b0041d ("ARM: imx: Remove i.MX31 board files"), but a reference to it remained in the cs89x0 driver. Drop this unused code. Signed-off-by: Ethan Nelson-Moore Fixes: c93197b0041d ("ARM: imx: Remove i.MX31 board files") Link: https://patch.msgid.link/20260509023732.42256-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 78cf08b3be47c28f07008a76c932bad7cdffa9d8 Author: Linus Walleij Date: Sat May 9 00:13:38 2026 +0200 net: ethernet: cortina: Carry over frag counter [ Upstream commit ebd8ec2b309e3a447851b456ccaf8fb39f3661e7 ] The gmac_rx() NAPI poll function assembles packets in an SKB from a ring buffer. If the ring buffer gets completely emptied during a poll cycle, we exit gmac_rx(), but the packet is not yet completely assembled in the SKB, yet the fragment counter frag_nr is reset to zero on the next invocation. Solve this by making the RX fragment counter a part of the port struct, and carry it over between invocations. Reset the fragment counter only right after calling napi_gro_frags(), on error (after calling napi_free_frags()) or if stopping the port. Reset it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-3-6c5d20ddc35b@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 68c9c3ac9ce53329fc1b70920029be1891cbeee6 Author: Andreas Haarmann-Thiemann Date: Tue May 5 23:52:17 2026 +0200 net: ethernet: cortina: Drop half-assembled SKB [ Upstream commit b266bacba796ff5c4dcd2ae2fc08aacf7ab39153 ] In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when gmac_get_queue_page() returns NULL for the second page of a multi-page fragment, the driver logs an error and continues — but does not free the partially assembled skb that was being assembled via napi_build_skb() / napi_get_frags(). Free the in-progress partially assembled skb via napi_free_frags() and increase the number of dropped frames appropriately and assign the skb pointer NULL to make sure it is not lingering around, matching the pattern already used elsewhere in the driver. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Andreas Haarmann-Thiemann Signed-off-by: Linus Walleij Reviewed-by: Alexander Lobakin Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3b249988d774dacf13b203817e971934a42243c4 Author: Linus Walleij Date: Sat May 9 00:13:37 2026 +0200 net: ethernet: cortina: Make RX SKB per-port [ Upstream commit 06937db21ee311ed07eba47954447245041a982d ] The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-2-6c5d20ddc35b@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 00efe58bbdcc93272d579ca24bfc912563f4a204 Author: David Howells Date: Tue May 12 13:33:47 2026 +0100 netfs: Fix overrun check in netfs_extract_user_iter() [ Upstream commit 0ef37eef83fad3542ee06db2940433ae1a92b39d ] Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Closes: https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-11-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 0df68fd72b2ac43a804d29ca14d4741a4f5211ed Author: Johannes Thumshirn Date: Wed Apr 29 22:58:15 2026 +0200 zonefs: handle integer overflow in zonefs_fname_to_fno [ Upstream commit 3a8389d42bdf4213730f4067f8bfa78bae6564ef ] In zonefs the file name in one of the two directories corresponds to the zone number. Here Alexey reported a possible integer overflow in zonefs_fname_to_fno(), where the parsing of the zone number from the file name can overflow the 'long' data type. Add a check for integer overflows and if the fno 'long' did overflow return -ENOENT. Reported-by: Alexey Dobriyan Fixes: d207794ababe ("zonefs: Dynamically create file inodes when needed") Signed-off-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit eef4f71b46a9929ac33e968538c9dd5d96a02460 Author: Jiayuan Chen Date: Mon Mar 30 15:32:29 2026 +0800 irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT [ Upstream commit 91840be8f710370607f949a627e070896faeddb8 ] On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0. After irq_work_single() clears BUSY via atomic_cmpxchg(), it still dereferences @work for irq_work_is_hard() and rcuwait_wake_up(). An irq_work_sync() caller on another CPU that enters after BUSY is cleared can observe BUSY==0 immediately, return, and free the work before those accesses complete — causing a use-after-free. Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire irq_work_single() execution is within an RCU read-side critical section. Then add synchronize_rcu() in irq_work_sync() after rcuwait_wait_event() to ensure the caller waits for the RCU grace period before returning, preventing premature frees. Fixes: 810979682ccc ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.") Suggested-by: Sebastian Andrzej Siewior Suggested-by: Steven Rostedt Signed-off-by: Jiayuan Chen Signed-off-by: Thomas Gleixner Reviewed-by: Sebastian Andrzej Siewior Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin commit 6760af11a26e93305ed4becb3470edfcabaa01a3 Author: Rosen Penev Date: Wed May 6 01:55:22 2026 -0700 irqchip/ath79-cpu: Remove unused function [ Upstream commit 0fa10fb77069fb67aa51384868ef3702b7791465 ] ath79_cpu_irq_init() was part of the legacy pre-OF code that got removed a while back. Remove it to get rid of a missing prototype warning, reported by the kernel test robot. [ tglx: Fix the subject prefix. Sigh ... ] Fixes: 51fa4f8912c0 ("MIPS: ath79: drop legacy IRQ code") Reported-by: kernel test robot Signed-off-by: Rosen Penev Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260506085522.1210143-1-rosenp@gmail.com Closes: https://lore.kernel.org/oe-kbuild-all/202412011509.kGQkDr1y-lkp@intel.com/ Signed-off-by: Sasha Levin commit 6af5fd2ffda1acea382b8f519379ce38df388901 Author: Gabor Juhos Date: Sat Mar 21 15:42:32 2026 +0100 phy: marvell: mvebu-a3700-utmi: fix incorrect USB2_PHY_CTRL register access [ Upstream commit 91ddf6f722084383fb05be731c0107814b055c0c ] The mvebu_a3700_utmi_phy_power_off() function tries to modify the USB2_PHY_CTRL register by using the IO address of the PHY IP block along with the readl/writel IO accessors. However, the register exist in the USB miscellaneous register space, and as such it must be accessed via regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function. Change the code to use regmap_update_bits() for modífying the register to fix this. Fixes: cc8b7a0ae866 ("phy: add A3700 UTMI PHY driver") Signed-off-by: Gabor Juhos Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit b0cc58e8f749dca8ad1830a3b7684f02d9a32541 Author: Myeonghun Pak Date: Wed May 6 21:43:11 2026 +0900 net: lan966x: avoid unregistering netdev on register failure [ Upstream commit c4f3d6eb1fcf6cd9ce4644f604d5aad1ce594dfc ] lan966x_probe_port() stores the newly allocated net_device in the port before calling register_netdev(). If register_netdev() fails, the probe error path calls lan966x_cleanup_ports(), which sees port->dev and calls unregister_netdev() for a device that was never registered. Destroy the phylink instance created for this port and clear port->dev before returning the registration error. The common cleanup path now skips ports without port->dev before reaching the registered netdev cleanup, so it only handles ports that reached the registered-netdev lifetime. This also avoids treating an uninitialized FDMA netdev and the failed port as a NULL == NULL match in the common cleanup path. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Link: https://patch.msgid.link/20260506124331.31945-1-mhun512@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9e1c9b95734445dc6892e26d7427941427b604cf Author: Bart Van Assche Date: Wed May 6 14:48:15 2026 -0700 ice: fix locking in ice_dcb_rebuild() [ Upstream commit 0ded1f36ba4021cba50513e80be6b6e173710168 ] Move the mutex_lock() call up to prevent that DCB settings change after the first ice_query_port_ets() call. The second ice_query_port_ets() call in ice_dcb_rebuild() is already protected by pf->tc_mutex. This also fixes a bug in an error path, as before taking the first "goto dcb_error" in the function jumped over mutex_lock() to mutex_unlock(). This bug has been detected by the clang thread-safety analyzer. Cc: intel-wired-lan@lists.osuosl.org Fixes: 242b5e068b25 ("ice: Fix DCB rebuild after reset") Signed-off-by: Bart Van Assche Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Tested-by: Arpana Arland Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 07d77d774f711725a2f2411104778d3e3a0dd636 Author: Kuniyuki Iwashima Date: Wed May 6 03:59:19 2026 +0000 tcp: Fix imbalanced icsk_accept_queue count. [ Upstream commit 7eca3292cac7c26dad4c236f51ba225c39a0523f ] When TCP socket migration happens in reqsk_timer_handler(), @sk_listener will be updated with the new listener. When we call __inet_csk_reqsk_queue_drop(), the listener must be the one stored in req->rsk_listener. The cited commit accidentally replaced oreq->rsk_listener with sk_listener, leading to imbalanced icsk_accept_queue count. Let's pass the correct listener to __inet_csk_reqsk_queue_drop(). Fixes: e8c526f2bdf1 ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().") Reported-by: Damiano Melotti Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 08d355936fcf70c81c94f9fe7310450b65c53399 Author: Martin Kaiser Date: Fri May 8 09:56:36 2026 +0900 test_kprobes: clear kprobes between test runs [ Upstream commit ef5581bb30efb939cc2bf093475c6cc85258e5cd ] Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run). Link: https://lore.kernel.org/all/20260507134615.1010905-1-martin@kaiser.cx/ Fixes: e44e81c5b90f ("kprobes: convert tests to kunit") Signed-off-by: Martin Kaiser Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 8a5f014460212d9937a350bec099527022552168 Author: Jianpeng Chang Date: Fri May 8 09:56:36 2026 +0900 kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist() [ Upstream commit 307abfac04a254c09c5705d816b33354acee97a0 ] When kprobe_add_area_blacklist() iterates through a section like .kprobes.text, the start address may not correspond to a named symbol. On ARM64 with CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y (introduced by commit baaf553d3bc3 ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")), the compiler flag -fpatchable-function-entry=4,2 inserts 2 NOPs before each function entry point for ftrace call_ops. These pre-function NOPs sit at the section base address, before the first named function symbol. The compiler emits a $x mapping symbol at offset 0x00 to mark the start of code, but find_kallsyms_symbol() ignores mapping symbols. Without CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS (e.g. defconfig), no pre-function NOPs are inserted, the first function starts at offset 0x00, and the bug does not trigger. This only affects modules that have a .kprobes.text section (i.e. those using the __kprobes annotation). Modules using NOKPROBE_SYMBOL() instead (like kretprobe_example.ko) blacklist exact function addresses via the _kprobe_blacklist section and are not affected. For kprobe_example.ko on ARM64 with -fpatchable-function-entry=4,2, the .kprobes.text section layout is: offset 0x00: $x + 2 NOPs (mapping symbol + ftrace preamble) offset 0x08: handler_post (64 bytes) offset 0x50: handler_pre (68 bytes) kprobe_add_area_blacklist() starts iterating from the section base address (offset 0x00), which only has the $x mapping symbol. kprobe_add_ksym_blacklist() then calls kallsyms_lookup_size_offset() for this address, which goes through: kallsyms_lookup_size_offset() -> module_address_lookup() -> find_kallsyms_symbol() find_kallsyms_symbol() scans all module symbols to find the closest preceding symbol. Since no named text symbol exists at offset 0x00, find_kallsyms_symbol() picks __UNIQUE_ID_vermagic (a .modinfo symbol whose address is in the temporary image) as the "best" match. The computed "size" = next_text_symbol - modinfo_symbol spans across these two unrelated memory regions, creating a blacklist entry with a bogus range of tens of terabytes. Whether this causes a visible failure depends on address randomization, here is what happens on Raspberry Pi 4/5: - On RPi5, the bogus size was ~35 TB. start + size stayed within 64-bit range, so the blacklist entry covered the entire kernel text. register_kprobe() in the module's own init function failed with -EINVAL. - On RPi4, the bogus size was ~75 TB. start + size overflowed 64 bits and wrapped to a small address near zero. The range check (addr >= start && addr < end) then failed because end wrapped around, so the bogus entry was accidentally harmless and kprobes worked by luck. The same bug exists on both machines, but randomization determines whether the integer overflow masks it or not. Fix this by adding notrace to the __kprobes macro. Functions in .kprobes.text are kprobe infrastructure handlers that should never be traced by ftrace. With notrace, the compiler stops inserting them and the non-symbol gap at the section start disappears entirely. Link: https://lore.kernel.org/all/20260506012706.2785785-1-jianpeng.chang.cn@windriver.com/ Fixes: baaf553d3bc3 ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS") Signed-off-by: Jianpeng Chang Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 99948d73a8c712c32ae541698f02634e0c0abf00 Author: Florian Westphal Date: Wed May 6 12:07:16 2026 +0200 netfilter: x_tables: unregister the templates first [ Upstream commit d338693d778579b676a61346849bebd892427158 ] When the module is going away we need to zap the template first. Else there is a small race window where userspace could instantiate a new table after the pernet exit function has removed the current table. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Tristan Madani Reviewed-by: Tristan Madani Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/ Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 26b2290baaf6da6add0f782a100766e686a33f4f Author: Filipe Manana Date: Tue Apr 28 16:58:56 2026 +0100 btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() [ Upstream commit c73370c677646e86fc4b1780fb07027bdf847375 ] The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter(). Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()") Reviewed-by: Boris Burkov Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 542b49d2cf12bd85a5fbe6d94477aea7c31bc2bc Author: Shuhao Fu Date: Tue Apr 28 16:01:39 2026 +0800 ALSA: hda: cs35l56: Put ACPI device after setting companion [ Upstream commit aa2fbece1b07954ef26488c800d126a36a8ab93e ] acpi_dev_get_first_match_dev() returns a refcounted ACPI device and callers are expected to balance it with acpi_dev_put(). When no companion is already attached, cs35l56_hda_read_acpi() looks up an ACPI device and sets it with ACPI_COMPANION_SET(), but leaves the lookup reference held. ACPI_COMPANION_SET() does not take ownership of that reference, so drop it with acpi_dev_put() after attaching the companion. Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Shuhao Fu Tested-by: Simon Trimmer Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260428080139.GA1649104@chcpu16 Signed-off-by: Sasha Levin commit 508b1193d63b5e073a3fe103eeb785fcba2d368c Author: Guenter Roeck Date: Tue May 5 21:15:37 2026 +0200 ARM: integrator: Fix early initialization [ Upstream commit 90d77b30a666049ad24df463f52e5d529c44e8cd ] Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. Fixes: bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap") Cc: Linus Walleij Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/20250518164118.3859567-1-linux@roeck-us.net Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20260505-integrator-fixes-v1-1-56ab9aac59db@kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin commit fb3ff02dd4444a79cf1d96019cf6ba2b06980daa Author: Maulik Shah Date: Tue Apr 28 17:44:58 2026 +0530 pinctrl: qcom: Fix wakeirq map by removing disconnected irqs for sm8150 [ Upstream commit 52ac35b8a151446481496404af3a8e5e889b3c5a ] PDC interrupts 122-125 were meant for ibi_i3c wakeup but sm8150 do not support i3c. GPIOs 39,51,88 and 144 are also connected to different PDC pin and already reflected in the wake irq map. Remove the unsupported wakeup interrupts from the map. Fixes: 90337380c809 ("pinctrl: qcom: sm8150: Specify PDC map") Reviewed-by: Konrad Dybcio Signed-off-by: Maulik Shah Signed-off-by: Navya Malempati Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 7d694570281a9f262b3fc40607eb6b9722f9d3ea Author: David Gow Date: Sat Apr 25 11:41:54 2026 +0800 kunit: config: KUNIT_DEBUGFS should depend on DEBUG_FS [ Upstream commit 8f80b5b227ef9ea422080487715c841856339aed ] CONFIG_KUNIT_DEBUGFS is totally useless without debugfs, so it should depend on CONFIG_DEBUG_FS. Link: https://lore.kernel.org/r/20260425034155.53913-2-david@davidgow.net Fixes: e2219db280e3 ("kunit: add debugfs /sys/kernel/debug/kunit//results display") Signed-off-by: David Gow Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 0df3f3031517add96cd8f579510f3b7938d3e5d8 Author: David Gow Date: Sat Apr 25 11:41:53 2026 +0800 kunit: config: Enable KUNIT_DEBUGFS by default [ Upstream commit 17e4c68ff35090d8cb743e3c82c09f92fda1ebda ] The KUNIT_DEBUGFS option is currently enabled based on the value of KUNIT_ALL_TESTS, but it really doesn't have anything to do with the set of enabled tests, so just enable it by default anyway. In particular, this shouldn't be only visible if KUNIT_ALL_TESTS is set, which is quite confusing. Link: https://lore.kernel.org/r/20260425034155.53913-1-david@davidgow.net Fixes: beaed42c427d ("kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS") Signed-off-by: David Gow Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 8b0f4e3b7ad62d1a0a3cea79ca4498b62a0035de Author: Sudeep Holla Date: Tue Apr 28 19:33:26 2026 +0100 firmware: arm_ffa: Skip free_pages on RX buffer alloc failure [ Upstream commit 09527e2c534911619d7e098729711100290bc3e1 ] If the RX buffer allocation fails in ffa_init(), the error path jumps to free_pages even though no buffer has been allocated yet. Route that case directly to free_drv_info so the cleanup path is only used after at least one RX/TX buffer allocation has succeeded. Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit adfff93d08a2e12ecf2a1eba272d18bc749f13c0 Author: Sudeep Holla Date: Tue Apr 28 19:33:25 2026 +0100 firmware: arm_ffa: Check for NULL FF-A ID table while driver registration [ Upstream commit 0a5e695095c557d2380131b613dea4e8d90371be ] The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match. Fixes: 92743071464f ("firmware: arm_ffa: Ensure drivers provide a probe function") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 58ab91af41243bb0bd358bcd4583f7f750480bd1 Author: Takashi Iwai Date: Tue Apr 28 10:33:16 2026 +0200 HID: uclogic: Fix regression of input name assignment [ Upstream commit 487359284509a6745e14b8c0518768bc277809b0 ] The previous fix for adding the devm_kasprintf() return check in the commit bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") changed the condition of hi->input->name assignment, and it resulted in missing the proper input device name when no custom suffix is defined. Restore the conditional to the original content to address the regression. Fixes: bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") Signed-off-by: Takashi Iwai Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit a2d1c819348b36fccbbfcf37c5fa7a50a9b4528f Author: Abdurrahman Hussain Date: Mon May 18 17:52:27 2026 -0700 hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors commit a7232f68c43ca62f545049b7f5fbfc75137b843b upstream. adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the pin-status word as pins_status = read_buf[0] + (read_buf[1] << 8); right after i2c_smbus_read_block_data(), guarding only against an error return. A well-behaved device returns 2 bytes for GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or 1-byte response too. If the device returns 0 bytes, both read_buf slots are uninitialized stack memory; if it returns 1 byte, read_buf[1] is. The composed value then flows through set_bit() into the caller's *bits in adm1266_gpio_get_multiple(), or into the return value of adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and the char-dev ioctls). That leaks a few bits of kernel stack per request on any device whose firmware glitch, bus error, or hostile slave produces a short block-read response. Add the missing length check to both call sites and surface a short response as -EIO. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-3-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 20d626463e3f98a82a446c2c863e5c4d468af939 Author: Abdurrahman Hussain Date: Mon May 18 17:52:29 2026 -0700 hwmon: (pmbus/adm1266) register the nvmem device after pmbus_do_probe() commit 6af713af91d5c34ec049eb3cc2c5b3f5eba953b8 upstream. adm1266_probe() calls adm1266_config_nvmem() -- which goes on to devm_nvmem_register() and exposes adm1266_nvmem_read() to userspace -- before pmbus_do_probe() has initialised the per-client PMBus state. Same latent hazard as the gpio_chip one fixed in the previous patch: once the nvmem device is registered, gpiolib's nvmem char-dev / sysfs interface is reachable, and any concurrent read triggers adm1266_nvmem_read() -> adm1266_nvmem_read_blackbox(), which issues PMBus traffic that races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_nvmem() down past pmbus_do_probe() so the nvmem device isn't reachable from userspace until the PMBus state the nvmem accessors depend on is fully initialised. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-5-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit cba4f1122dfbf84e22b971a446b2264c83abe4f1 Author: Abdurrahman Hussain Date: Mon May 18 17:52:28 2026 -0700 hwmon: (pmbus/adm1266) register the gpio_chip after pmbus_do_probe() commit 491403b9b76cf66abd81301c5901aa4a4549f1e8 upstream. adm1266_probe() calls adm1266_config_gpio() -- which goes on to devm_gpiochip_add_data() and exposes the gpio_chip callbacks to gpiolib -- before pmbus_do_probe() has initialised the per-client PMBus state (notably the pmbus_lock mutex the core hands out via pmbus_get_data()). That ordering is already a latent hazard: any GPIO access that lands between adm1266_config_gpio() and the end of pmbus_do_probe() (for example a sysfs read from a user space agent that opens the gpiochip the instant gpiolib advertises it) races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_gpio() down past pmbus_do_probe() so the chip isn't reachable from userspace until the PMBus state it depends on is fully initialised. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-4-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 6b5573b63e3062d12a64b6ac3fcbd3da1a85a554 Author: Abdurrahman Hussain Date: Mon May 18 17:52:26 2026 -0700 hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple commit 3327a12aee9e10ffa903e28b8445dfd1af5307c0 upstream. adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop and then a second time before the PDIO_STATUS loop: *bits = 0; for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) { ... set_bit(gpio_nr, bits); } ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...); ... *bits = 0; for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) { ... set_bit(gpio_nr, bits); } The second *bits = 0 throws away every GPIO bit the first loop just populated, so callers asking for any combination of GPIO and PDIO pins always see the GPIO portion of the returned bits as zero. Drop the redundant second assignment so both halves of the result survive. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 4d1da9a6be5a8156c532d571c2ed237169f99244 Author: Abdurrahman Hussain Date: Mon May 18 17:52:25 2026 -0700 hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR commit d7834d92251baade796812876e95555e2066fa9f upstream. adm1266_gpio_get_multiple() iterates the PDIO portion of the caller-supplied mask using for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { ... } where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233), not the number of PDIO pins. The intended upper bound is ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25. gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip), so the iteration walks find_next_bit() up to 242, reading up to 217 extra bits (a handful of unsigned-long words: four on 64-bit, seven on 32-bit) of whatever lives past the end of the mask in the caller's stack. Any incidental set bit in that range then drives a set_bit(gpio_nr, bits) call that writes past the end of the caller-supplied bits array too -- both out-of-bounds. Substitute ADM1266_PDIO_NR for the constant so the scan stops at the last real PDIO bit. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-1-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 60c4b9fe1a3dd012014b1f561a6928a0b5db1126 Author: Abdurrahman Hussain Date: Fri May 15 15:11:51 2026 -0700 hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer commit 43cae21424ff8e33894a0f86c6b80b840c049fd7 upstream. adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-5-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit d94ceb16e55b6d8019ab069e357c76ac42f0ffbc Author: Abdurrahman Hussain Date: Fri May 15 15:11:50 2026 -0700 hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer commit 487566cb1ccdf3756fdd7bf8d875e612ff3169bb upstream. adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-4-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit f85c81e93dbd6915970bd5f3bffcf62633c4c54c Author: Abdurrahman Hussain Date: Fri May 15 15:11:49 2026 -0700 hwmon: (pmbus/adm1266) reject implausible blackbox record_count commit 4afca954622d672ea65ed961bed01cf91caa034e upstream. adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-3-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 025cfc7a09c5a527f149a3155932cbfae259ab7d Author: Abdurrahman Hussain Date: Fri May 15 15:11:47 2026 -0700 hwmon: (pmbus/adm1266) seed timestamp from the real-time clock commit b86095e3d7dcf2bf80c747349a35912a87a85098 upstream. adm1266_set_rtc() seeds the chip's SET_RTC register from ktime_get_seconds(), which returns CLOCK_MONOTONIC -- i.e. seconds since the host last booted, not seconds since the Unix epoch. The chip stamps that value into every blackbox record it captures. Userspace reading those timestamps back expects wall-clock seconds: that's what the SET_RTC frame layout documents (datasheet Rev. D, Table 84) and what every other consumer of "seconds since epoch" assumes. Seeding from CLOCK_MONOTONIC gives blackbox records a timestamp that is only meaningful within a single boot of the host and silently resets to small values on every reboot. Switch to ktime_get_real_seconds() so the seed matches what the register is documented to hold. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-1-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 32edd2a28e112064020a2f319a8cb8a9e5a09767 Author: Sven Eckelmann Date: Sat May 2 19:53:21 2026 +0200 batman-adv: tt: fix negative tt_buff_len commit b64963a2ceeb7529310b6cf253a1e540784422f4 upstream. batadv_orig_node::tt_buff_len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_other_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 22d59c72f4a47ffec121d0610f70d0d70c3c11c8 Author: Sven Eckelmann Date: Sat May 2 19:53:21 2026 +0200 batman-adv: tt: fix negative last_changeset_len commit fc92cdfcb295cefa4344d71a527d61b638b7bfc4 upstream. batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit c2c88736022cd06a8035d3ef5c8dfeeb901990b7 Author: Sven Eckelmann Date: Wed May 13 23:38:54 2026 +0200 batman-adv: tp_meter: fix race condition in send error reporting commit 71dce47f0758537fff78fddb5fb0d4632d29b29f upstream. batadv_tp_sender_shutdown() previously used two separate variables to track session state: sending (an atomic flag indicating whether the session was active) and reason (a plain enum storing the stop reason). This introduced a race window between the two writes: after sending was cleared to 0, batadv_tp_send() could observe the stopped state and call batadv_tp_sender_end() before reason was written, causing the wrong stop reason to be reported to the caller. Fix this by consolidating both variables into a single atomic send_result, which holds 0 while the session is running and the stop reason once it ends. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 0b1bedf114ea93fef929b31f0d70a9eedcc601de Author: Sven Eckelmann Date: Sun May 10 11:31:03 2026 +0200 batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown commit 77098e4bea37af51d3962efa88a5af2ea5e1ac57 upstream. The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty. Cc: stable@kernel.org Fixes: 3d3cf6a7314a ("batman-adv: stop tp_meter sessions during mesh teardown") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 53f931e0146ae5bdab4cba302646827d06b3794b Author: Sven Eckelmann Date: Wed May 13 09:01:35 2026 +0200 batman-adv: tp_meter: avoid use of uninit sender vars commit 6c65cf23d4c6170fcf5714c32aa64689718cb142 upstream. batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 48663158222b3b7f6ee6791a67d512ede7fc94bb Author: Sven Eckelmann Date: Sun May 10 11:43:20 2026 +0200 batman-adv: bla: fix report_work leak on backbone_gw purge commit 0459430add32ea41f3e2ef9351610e6d33627a6b upstream. batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Reviewed-by: Simon Wunderlich Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit b54e459cf86943583c1aa2ee3081874e7ab1f5f3 Author: Sven Eckelmann Date: Wed May 13 09:01:36 2026 +0200 batman-adv: frag: disallow unicast fragment in fragment commit bc62216dc8e221e3781afa14430f45208bfa9af9 upstream. batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a BATADV_UNICAST_FRAG packet is received. Once all fragments are collected and the packet is reassembled, batadv_recv_frag_packet() calls batadv_batman_skb_recv() again to process the defragmented payload. A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting). Each nesting level recurses through batadv_batman_skb_recv() without bound, growing the kernel stack until it is exhausted. Since refragmentation or fragments in fragments are not actually allowed, discard all packets which are still BATADV_UNICAST_FRAG packets after the defragmentation process. Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit c1bac194733aabd731aafa6a01350c229e187dba Author: Luxiao Xu Date: Mon May 11 18:52:09 2026 +0200 batman-adv: fix tp_meter counter underflow during shutdown commit 94f3b133168d1c49895e7cc6afbcf1cc0b354602 upstream. batadv_tp_sender_shutdown() unconditionally decrements the "sending" atomic counter. If multiple paths (e.g. timeout, user cancel, and normal finish) call this function, the counter can underflow to -1. Since the sender logic treats any non-zero value as "still sending", a negative value causes the sender kthread to loop indefinitely. This leads to a use-after-free when the interface is removed while the zombie thread is still active. Fix this by using atomic_xchg() to ensure the counter only transitions from 1 to 0 once. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei [sven: added missing change in batadv_tp_send] Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit f653b040dad1af70fa5cd4fe085e4758925480c9 Author: Ruide Cao Date: Wed May 13 11:58:15 2026 +0800 batman-adv: fix fragment reassembly length accounting commit 9cd3f16c320bfdadd4509358122368deb56a5741 upstream. batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruide Cao Tested-by: Ren Wei Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 866ac1d57040ed0b44ca732e3c66b3aa6b93011c Author: Sven Eckelmann Date: Wed May 13 09:01:34 2026 +0200 batman-adv: dat: handle forward allocation error commit 2d8826a2d3657cea66fb0370f9e521575a673871 upstream. batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb for each DHT candidate, but does not check the return value before passing it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences the skb unconditionally, so a failed allocation triggers a NULL pointer dereference. Skip forwarding to the current DHT candidate on allocation failure. Cc: stable@kernel.org Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 6de089b545db013433cf934bb4e4433dec2dd65f Author: Ruijie Li Date: Thu May 14 16:13:25 2026 +0800 batman-adv: clear current gateway during teardown commit a340a51ed801eab7bb454150c226323b865263cc upstream. batadv_gw_node_free() removes the gateway list entries during mesh teardown, but it does not clear the currently selected gateway. This leaves stale gateway state behind across cleanup and can break a later mesh recreation. Clear bat_priv->gw.curr_gw before walking the gateway list so the selected gateway reference is dropped as part of teardown. Fixes: 2265c1410864 ("batman-adv: gateway election code refactoring") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruijie Li Signed-off-by: Zhanpeng Li Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 70bcb678561f0fb58f33270fc73f12f3be72b878 Author: Sven Eckelmann Date: Thu May 14 19:22:02 2026 +0200 batman-adv: mcast: fix use-after-free in orig_node RCU release commit 20c2d6a20ca936f5aaa6dd40f73f262ac45c87cc upstream. batadv_mcast_purge_orig() removes entries from RCU-protected hlists but does not wait for an RCU grace period before returning. Concurrent RCU readers may still accesses references to those entries at the point of removal. RCU-protected readers trying to operate on entries like orig->mcast_want_all_ipv6_node will then access already freed memory. Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(), just before the call_rcu() invocation. This ensures RCU readers that were active at purge time have drained before the orig_node memory is reclaimed. Cc: stable@kernel.org Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Acked-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 90c398e822ca76e40548df0c061dd4f93ea92d71 Author: Harry Wentland Date: Thu May 7 16:26:31 2026 -0400 drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async commit 6c92f6d9600efa3ef0d9e560a2b52776d9803c29 upstream. [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. Assisted-by: GitHub Copilot:Claude claude-4-opus Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit fb30a3890d62fd50a95aef684faf64a307592e42 Author: Harry Wentland Date: Mon May 4 16:14:11 2026 -0400 drm/amd/display: Validate GPIO pin LUT table size before iterating commit 86d2b20644b11d21fe52c596e6e922b4590a3e3f upstream. [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. Assisted-by: GitHub Copilot:claude-opus-4-6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 266b21b57fbb87e09ec4d46ad54145c7816aa6a1 Author: Harry Wentland Date: Mon May 4 11:14:45 2026 -0400 drm/amd/display: Fix integer overflow in bios_get_image() commit cd86529ec61474a38c3837fb7823790a7c3f8cce upstream. [Why&How] The bounds check in bios_get_image() computes 'offset + size' using unsigned 32-bit arithmetic before comparing against bios_size. If a VBIOS image contains a near-UINT32_MAX offset the addition wraps to a small value, the comparison passes, and the function returns a wild pointer past the VBIOS mapping. Additionally, the comparison uses '<' (strict), which incorrectly rejects the valid exact-fit case where offset + size == bios_size. Fix both issues by restructuring the check to avoid the addition entirely: first reject if offset alone exceeds bios_size, then check size against the remaining space (bios_size - offset). This eliminates the overflow and correctly permits exact-fit accesses. Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit d40fb392af659c4a02b560319f226842f6ec1a95) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit e4d3d33ab7bdc1f6fd93a9039fcb410b2ef0c483 Author: Osama Abdelkader Date: Thu Apr 30 21:56:59 2026 +0200 drm/bridge: megachips: remove bridge when irq request fails commit d45d5c819f2cd0b6b5d76a194a537a5f4aeefecb upstream. If devm_request_threaded_irq() fails after drm_bridge_add(), remove the bridge before returning. Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is tied to the STDP4028 device while ge_b850v3_register() may complete from either I2C probe; devm would not unwind the bridge if the other client's probe fails. Signed-off-by: Osama Abdelkader Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Tested-by: Ian Ray Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman commit 25473edcdaefcd378293a8bfc43f6d254d6fd91c Author: Julien Chauveau Date: Tue Mar 24 20:30:11 2026 +0100 drm/bridge: it66121: acquire reset GPIO in probe commit e02b5262fd288cc235f14e12233ea54e78c04611 upstream. The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset() calls gpiod_set_value() on it. However, the GPIO descriptor is never acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout the driver lifetime. gpiod_set_value() silently returns when passed a NULL descriptor, so the hardware reset sequence in it66121_hw_reset() is a no-op. This leaves the chip in an undefined state at probe time, which can prevent it from responding on the I2C bus. The DT binding marks reset-gpios as a required property, so all compliant device trees provide this GPIO. Add the missing devm_gpiod_get() call after enabling power supplies and before the hardware reset, so the chip is properly reset with power applied. Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Cc: stable@vger.kernel.org Signed-off-by: Julien Chauveau Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com Signed-off-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman commit 21ab64c77a30d56efc506c8fa2ad8959f8ce3d36 Author: Deepanshu Kartikey Date: Tue May 19 13:52:47 2026 +0530 drm/virtio: use uninterruptible resv lock for plane updates commit 9af1b6e175c82daf4b423da339a722d8e67a735a upstream. virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences(). Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271 Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().") Cc: stable@vger.kernel.org Signed-off-by: Deepanshu Kartikey Signed-off-by: Dmitry Osipenko Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com Signed-off-by: Greg Kroah-Hartman commit 371f53925a6714d0aa35f1aefdffc3e8cd62f480 Author: Bartosz Golaszewski Date: Wed May 6 13:57:00 2026 +0200 device property: set fwnode->secondary to NULL in fwnode_init() commit 215c90ee656114f5e8c32408228d97082f8e0eef upstream. If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitalized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. Cc: stable Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Signed-off-by: Bartosz Golaszewski Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Andy Shevchenko Reviewed-by: Sakari Ailus Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit fb3539b367f553c3d822dc7ac4a92fbb3f3666b1 Author: Huacai Chen Date: Thu May 21 20:58:40 2026 +0800 LoongArch: Remove unused code to avoid build warning commit 0ccc9d47cf020994097ff51827cebd04aa2b0bf4 upstream. After commit feee6b2989165631b1 ("mm/memory_hotplug: shrink zones when offlining memory"), __remove_pages() doesn't need the "zone" parameter so the "page" variable is also unused. Remove the unused code to avoid such build warning: arch/loongarch/mm/init.c: In function 'arch_remove_memory': arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=] 134 | struct page *page = pfn_to_page(start_pfn); Cc: Reviewed-by: Guo Ren Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 14553be882d9ce91749c9d64041de66e34ad8e70 Author: Michael Bommarito Date: Wed May 13 13:53:24 2026 -0400 RDMA/siw: Reject MPA FPDU length underflow before signed receive math commit 0ce1bc9e46ecabe84772bb561e373c0d9876d6f2 upstream. A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Link: https://patch.msgid.link/r/20260513175325.2042630-2-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Acked-by: Bernard Metzler Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit f2dc841d7dc9063fe9b47ced869b1271e55052ae Author: Johan Hovold Date: Tue May 12 09:48:09 2026 +0200 spi: ti-qspi: fix use-after-free after DMA setup failure commit ea6ec3343e05f7937a53eb6d7617b3abdb4abc19 upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: c687c46e9e45 ("spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=17 Cc: stable@vger.kernel.org # 4.12 Cc: Vignesh R Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074809.915084-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 450c319dd04d0eeff4184889768f7ada826a2e35 Author: Johan Hovold Date: Tue May 12 09:47:33 2026 +0200 spi: sprd: fix error pointer deref after DMA setup failure commit 3d67fffb74267772d461c02c67f1eff893ad547d upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=10 Cc: stable@vger.kernel.org # 5.1 Cc: Lanqing Liu Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074733.915029-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 309c6058622d080fe8c2fab87c30da82d834d989 Author: Michael Bommarito Date: Sun Apr 19 17:04:20 2026 -0400 scsi: isci: Fix use-after-free in device removal path commit b52a8d52c3125ec9a93106ed816582368de34426 upstream. The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop(). Fixes: 6f231dda6808 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 9d5ae6b8d9ec7505b44ab7fc32b283cff3aa609e Author: Wayne Chang Date: Mon May 4 11:33:05 2026 +0800 phy: tegra: xusb: Fix per-pad high-speed termination calibration commit da110228b54f2e2143d97ea7151e0dc22e539d67 upstream. The existing code reads a single hs_term_range_adj value from bit field [10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly. However, on SoCs that support per-pad termination, each pad has its own hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3 in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13] respectively. Fix the calibration by reading per-pad values from the appropriate fuse registers. For SoCs that do not support per-pad termination, replicate pad 0's value to all pads to maintain existing behavior. Add a has_per_pad_term flag to the SoC data to indicate whether per-pad termination values are available in FUSE_USB_CALIB_EXT_0. Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Signed-off-by: Wei-Cheng Chen Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 45760b72e84c1a1498f1a8a9047184c85299da20 Author: Johan Hovold Date: Tue May 12 09:43:34 2026 +0200 spi: qup: fix error pointer deref after DMA setup failure commit a7e8f3efd50a165ba0189f6dc57f7e51a7d149db upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=4 Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074334.914735-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 3c83a6912c24a4742d452ee95923f8811b0b9030 Author: Osama Abdelkader Date: Thu Apr 30 21:49:42 2026 +0200 drm/bridge: chipone-icn6211: use devm_drm_bridge_add in i2c probe commit 73d01051e8040c0b1de7fd26b3b8d0c2ffa6895c upstream. Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe. Signed-off-by: Osama Abdelkader Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman commit dab9f93251b2c86a033de6098d0c73afddd55d4a Author: Michael Bommarito Date: Tue May 19 09:25:19 2026 -0400 KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits commit 9ce754ed8e7ab4e3999767ce1505f85c449ccb07 upstream. Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. Fixes: 57a9a117154c ("KVM: arm64: vgic-its: Device table save/restore") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/r/20260519132519.2142458-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit e0790046f6beb54dd7cadfed223ec51a2d42528d Author: Vladimir Murzin Date: Fri May 15 14:37:29 2026 +0100 arm64: probes: Handle probes on hinted conditional branch instructions commit 2ccd8ff980b50e842481bae71102fa3883fc4377 upstream. BC.cond instructions introduced by FEAT_HBC cannot be executed out-of-line, like other branch instructions. However, they can be simulated in the same way as B.cond instructions. Extend the B.cond decoder mask to match BC.cond instructions as well, and handle them using the existing B.cond simulation path. Fixes: 7f86d128e437 ("arm64: add HWCAP for FEAT_HBC (hinted conditional branches)") Cc: Signed-off-by: Vladimir Murzin Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit f383cff9fb382139980bac1bcd3f3f5d59f68435 Author: Masami Hiramatsu (Google) Date: Thu May 21 13:49:14 2026 +0900 tracing: Do not call map->ops->elt_free() if elt_alloc() fails commit 8f0f5c4fb9df0e19a341e0c6ed8dc4fda9124f03 upstream. In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. Link: https://sashiko.dev/#/patchset/20260520223101.34710-1-rosenp%40gmail.com Cc: stable@vger.kernel.org Cc: Tom Zanussi Cc: Mathieu Desnoyers Cc: Rosen Penev Reported-by: Sashiko Fixes: 2734b629525a ("tracing: Add per-element variable support to tracing_map") Link: https://patch.msgid.link/177933895460.108746.5396070821443932634.stgit@devnote2 Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit bdc349a87f1fb02c18c4071858a06542bfea783d Author: Zhihao Cheng Date: Tue May 19 17:18:05 2026 +0800 cifs: Fix busy dentry used after unmounting commit c68337442f03953237a94577beb468ab2662a851 upstream. Since commit 340cea84f691c ("cifs: open files should not hold ref on superblock"), cifs file only holds the dentry ref_cnt, the cifs file close work(cfile->deferred) could be executed after unmounting, which will trigger a warning in generic_shutdown_super: BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of cifs cifs] The detailed processs is: process A process B kworker fd = open(PATH) vfs_open file->__f_path = *path // dentry->d_lockref.count = 1 cifs_open cifs_new_fileinfo cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2 close(fd) __fput cifs_close queue_delayed_work(deferredclose_wq, cfile->deferred) dput(dentry) // dentry->d_lockref.count = 1 smb2_deferred_work_close _cifsFileInfo_put list_del(&cifs_file->flist) umount cleanup_mnt deactivate_super cifs_kill_sb cifs_close_all_deferred_files_sb cifs_close_all_deferred_files // cannot find cfile, skip _cifsFileInfo_put kill_anon_super generic_shutdown_super shrink_dcache_for_umount umount_check WARN ! // dentry->d_lockref.count = 1 cifsFileInfo_put_final dput(cifs_file->dentry) // dentry->d_lockref.count = 0 Fix it by flushing 'deferredclose_wq' before calling kill_anon_super. Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548. Fixes: 340cea84f691c ("cifs: open files should not hold ref on superblock") Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N Signed-off-by: Zhihao Cheng Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 1ced0f5a851f9cae274545a42a06c459b7fd8881 Author: John Walker Date: Thu May 7 17:07:20 2026 -0600 wifi: cfg80211: advance loop vars in cfg80211_merge_profile() commit 7666dbb1bacc4ba522b96740cba7283d243d16e1 upstream. cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. Cc: stable@vger.kernel.org Fixes: fe806e4992c9 ("cfg80211: support profile split between elements") Signed-off-by: John Walker Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit a3a4366731a5d807c07fbfeb5b11b706153b5ac2 Author: Marcin Szycik Date: Fri May 15 11:24:10 2026 -0700 ice: fix setting promisc mode while adding VID filter commit ebc8de716c9ec2be384abdc2dd866da26c6580d1 upstream. There are at least two paths through which VSI promiscuous mode can be independently configured via ice_fltr_set_vsi_promisc(): - ice_vlan_rx_add_vid() (netdev op) - ice_service_task() -> ... -> ice_set_promisc() Both paths may try to program promiscuous mode concurrently. One such scenario is: 1. Add ice netdev to bond 2. Add the bond netdev to bridge 3. ice netdev enters allmulticast mode (IFF_ALLMULTI) 4. Service task programs promisc mode filter 5. Bridge -> bond calls ice_vlan_rx_add_vid() Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc() returns any error, including -EEXIST. This causes VLAN filtering setup to fail on the bond interface. ice_set_promisc() already handles -EEXIST correctly. Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the promisc filter is already programmed, continue without returning error. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Cc: stable@vger.kernel.org Signed-off-by: Marcin Szycik Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit add70e2682c0ad3be2a5810bcf1bc13963ba4df9 Author: Michael Bommarito Date: Fri May 15 11:24:14 2026 -0700 ixgbevf: fix use-after-free in VEPA multicast source pruning commit 5d49b568c188dc77199d8d2b959c91da8cc27cf1 upstream. ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3c5411fa4944ed99af3d9d1de750ea8169b6dac9 Author: Michael Bommarito Date: Tue May 12 16:51:14 2026 -0400 ipv4: raw: reject IP_HDRINCL packets with ihl < 5 commit 915fab69823a14c170dbaa3b41978768e0fe62fc upstream. raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Suggested-by: Herbert Xu Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/77ec2b5e8111961c2c39883c92e8aa2709039c17.1778614451.git.michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit f50c3ff97c83468a101d665ba168bd4b72657610 Author: Kyle Farnung Date: Wed May 13 21:52:12 2026 -0700 wifi: ath11k: clear shared SRNG pointer state on restart commit f51e4b3b5574ad8cb5b16b11f8a1452147ece87a upstream. LMAC rings reuse the shared rdp/wrp pointer buffers without going through the normal SRNG hw-init path that zeros non-LMAC ring pointers. After restart, ath11k_hal_srng_clear() can therefore hand stale hp/tp state from the previous firmware instance back to the new one. Clear the shared pointer buffers while keeping the allocations in place so restart still avoids reallocating SRNG DMA memory, but starts with fresh ring-pointer state. Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman commit ce29d3bf79a265c12113885c92900044985ef18b Author: Stefano Garzarella Date: Mon May 18 11:06:55 2026 +0200 vsock/virtio: reset connection on receiving queue overflow commit a4f0b001782b21663d10df983b4b208195bec66c upstream. When there is no more space to queue an incoming packet, the packet is silently dropped. This causes data loss without any notification to either peer, since there is no retransmission. Under normal circumstances, this should never happen. However, it could happen if the other peer doesn't respect the credit, or if the skb overhead, which we recently began to take into account with commit 059b7dbd20a6 ("vsock/virtio: fix potential unbounded skb queue"), is too high. Fix this by resetting the connection and setting the local socket error to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a packet, so both peers are explicitly notified of the failure rather than silently losing data. Fixes: ae6fcfbf5f03 ("vsock/virtio: discard packets if credit is not respected") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit cc27e989a5dfdfcfc1cca7c3be27a0c7532b46cb Author: Minh Nguyen Date: Tue May 19 17:23:10 2026 +0700 vsock/vmci: fix UAF when peer resets connection during handshake commit 99e22ddf4edb63dc8382bc028af928056d3450cf upstream. vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Cc: stable@vger.kernel.org Signed-off-by: Minh Nguyen Acked-by: Bryan Tan Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 273a1481c556a59450aaa261195ad5767bcd12b7 Author: Steven Rostedt Date: Wed May 20 22:08:01 2026 -0400 ring-buffer: Fix reporting of missed events in iterator commit a254b6d13b0edd6272926674d2afc46d46e496b7 upstream. When tracing is active while reading the trace file, if the iterator reading the buffer detects that the writer has passed the iterator head, it will reset and set a "missed events" flag. This flag is passed to the output processing to show the user that events were missed: CPU:4 [LOST EVENTS] The problem is that the flag is reset after it is checked in ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU ring buffers and it will check if they are dropped when figuring out which buffer to print next. This prematurely clears the missed_events flag if the CPU buffer with the missed events is not the one that is printed next. On the iteration where the CPU buffer with the missed events is printed, the check if it had missed events would return false and the output does not show that events were missed. Do not reset the missed_events flag when checking if there were missed events, but instead clear it when moving the iterator head to the next event. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora Fixes: c9b7a4a72ff64 ("ring-buffer/tracing: Have iterator acknowledge dropped events") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 3904b993cc17ec5d7c5d3b57dbd0b775dafb9684 Author: Dawei Feng Date: Wed May 20 15:03:23 2026 +0800 qed: fix double free in qed_cxt_tables_alloc() commit 2bccfb8476ca5f3548afbd623dc7a6980d4e77de upstream. If one of the later PF or VF CID bitmap allocations fails, qed_cid_map_alloc() jumps to cid_map_fail and frees the previously allocated CID bitmaps before returning an error. qed_cxt_tables_alloc() then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free() again. Fix this by setting each CID bitmap pointer to NULL after bitmap_free() to avoid double free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime reproduction was not attempted because exercising the failing allocation path requires device-specific setup. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c161ad9157f5a0429b5ff94d9770faf3bf48d273 Author: Yizhou Zhao Date: Tue May 12 01:30:41 2026 +0800 netfilter: nft_inner: Fix IPv6 inner_thoff desync commit b6a91f68ebfed9c38e0e9150f58a9b85da07181c upstream. In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization. Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: GLM:5.1 Z.ai Signed-off-by: Yizhou Zhao Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit c281e018af98df91827d65bec00f4956c00a1b02 Author: Nan Li Date: Tue May 12 16:50:01 2026 +0800 netfilter: ipset: stop hash:* range iteration at end commit 0d3a282ab5f165fc207ff49ea5b6ad8f54616bd6 upstream. The following hash set variants: hash:ip,mark hash:ip,port hash:ip,port,ip hash:ip,port,net iterate IPv4 ranges with a 32-bit iterator. The iterator must stop once the last address in the requested range has been processed. Advancing it once more can move the traversal state past the end of the request, so a later retry may continue from an unintended position. Handle the iterator increment explicitly at the end of the loop and stop once the upper bound has been processed. This keeps the existing retry behaviour intact for valid ranges while preventing traversal from continuing past the original boundary. Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Nan Li Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 1e5e20031c5eee8d2e490a90ff4d6a2feecfc3be Author: Haoze Xie Date: Fri May 15 11:19:02 2026 +0800 netfilter: nf_queue: hold bridge skb->dev while queued commit e196115ec330a18de415bdb9f5071aa9f08e53ce upstream. br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Haoze Xie Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 41ec2e242f1702e8370ddfe14d22b7a766021c3e Author: Zhengchuan Liang Date: Wed May 13 15:57:17 2026 +0800 netfilter: ip6t_hbh: reject oversized option lists commit 4322dcde6b4173c2d8e8e6118ed290794263bcc8 upstream. struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors, but hbh_mt6_check() does not reject larger optsnr values supplied from userspace. Validate optsnr in the rule setup path so only match data that fits the fixed-size opts array can be installed. This follows the existing xtables pattern of rejecting invalid user-provided counts in checkentry() and keeps the packet matching path unchanged. `struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array, where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible: [ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29 [ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 16bd798cb6d8337d7c3eea1adc412f31b5181d5b Author: Michael Bommarito Date: Wed May 13 21:37:39 2026 -0400 net: ifb: report ethtool stats over num_tx_queues commit 5db89c99566fc4728cc92e941d8e1975711e24b5 upstream. ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB per-queue RX and TX stats live in those entries: ifb_xmit() updates txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates txp->tx_stats, and ifb_stats64() aggregates both over dev->num_tx_queues. The ethtool stats callbacks instead size and walk the per-queue stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With an asymmetric device where the RX queue count exceeds the TX queue count, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10 ifb_get_ethtool_stats() indexes past the tx_private allocation and copies adjacent slab data through ETHTOOL_GSTATS. Use dev->num_tx_queues consistently for the stats strings, the stats count, and the stats data walks. This reports one RX stats group and one TX stats group for each backing ifb_q_private entry, which is the queue set IFB can actually populate. Reproduced under UML+KASAN at v7.1-rc2: BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae Read of size 8 at addr 0000000062dbd228 by task ethtool/36 ifb_fill_stats_data+0x3c/0xae ifb_get_ethtool_stats+0xc0/0x129 __dev_ethtool+0x1ca5/0x363c dev_ethtool+0x123/0x1b3 dev_ioctl+0x56c/0x744 sock_do_ioctl+0x15f/0x1b2 sock_ioctl+0x4d5/0x50a sys_ioctl+0xd8b/0xde9 With the patch applied, the same UML+KASAN repro is silent and ethtool -S ifb10 reports only the stats backed by the single allocated tx_private entry. Fixes: a21ee5b2fcb8 ("net: ifb: support ethtools stats") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260514013739.3549624-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 289499907399c5a9f2ed82cb34df49112bb8488f Author: Nicolai Buchwitz Date: Wed May 20 20:43:20 2026 +0200 net: bcmgenet: keep RBUF EEE/PM disabled commit 9a1730245e416d11ad5c0f2c100061d61cc43f60 upstream. Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. Link: https://github.com/raspberrypi/linux/issues/7304 Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Cc: stable@vger.kernel.org Signed-off-by: Nicolai Buchwitz Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8420aa4900417797323dd567ba9d1512280c2dc3 Author: Zijing Yin Date: Tue May 19 10:26:33 2026 -0700 phonet/pep: disable BH around forwarded sk_receive_skb() commit dbc81608e3a653dea6cf403f20cae35468b8ab9c upstream. The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c Cc: stable@vger.kernel.org Signed-off-by: Zijing Yin Acked-by: Rémi Denis-Courmont Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit be43e6b4043113c3b3cf887c3c8350f67140274c Author: Jiexun Wang Date: Wed May 6 19:43:30 2026 +0800 Bluetooth: serialize accept_q access commit e83f5e24da741fa9405aeeff00b08c5ee7c37b88 upstream. bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Jann Horn Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Signed-off-by: Jiexun Wang Reviewed-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit a143ce77a5292f2c9285137433d879ce71d190a7 Author: Michael Bommarito Date: Fri May 15 10:38:19 2026 -0400 Bluetooth: MGMT: validate Add Extended Advertising Data length commit d3f7d17960ed50df3a6709c5158caff989c8c905 upstream. MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data. Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 9d20d48be2c4a071fb015eb09bda2cecd25daf34 Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon May 18 10:49:49 2026 +0800 Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths commit c1bb9336ae6b54a5f6a353c4bd4ed9a4307e429b upstream. Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. Fixes: 3b799254cf6f ("Bluetooth: hci_uart: Cancel init work before unregistering") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit fe69f634b076ae3ca81c5a5b845d9bba527036f7 Author: Jann Horn Date: Tue May 12 22:15:39 2026 +0200 Bluetooth: bnep: Fix UAF read of dev->name commit 59e932ded949fa6f0340bf7c6d7818f962fa4fd2 upstream. bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.) Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 3af41ee7ebecb0d5c8a504861f6cfad31345310f Author: David Carlier Date: Fri May 15 07:25:25 2026 +0100 Bluetooth: ISO: drop ISO_END frames received without prior ISO_START commit 84c24fb151fc1179355296d7ff29129ac7c42129 upstream. ISO data PDUs carry a packet-boundary flag indicating START, CONT, END or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing ISO_START by checking conn->rx_len before touching conn->rx_skb, but ISO_END does not. If a peer sends an ISO_END as the first packet on a fresh ISO connection, conn->rx_skb is still NULL and conn->rx_len is zero, so skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS, where receivers sync to a broadcaster without pairing, any broadcaster on the air can trigger this. Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment is logged and dropped instead of crashing the host. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 5d86d2f1b4d9a508c441d3e45277ae1a73cfed57 Author: Safa Karakuş Date: Sat May 16 21:15:04 2026 +0300 Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() commit ab1513597c6cf17cd1ad2a21e3b045421b48e022 upstream. bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang Reviewed-by: Siwei Zhang Signed-off-by: Safa Karakuş Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 6f63a60580ebdd9a1f22f89a84814d1fefe16b1c Author: Abdun Nihaal Date: Tue May 19 11:57:39 2026 +0530 net: wwan: iosm: fix potential memory leaks in ipc_imem_init() commit c5d93b2c40355e999715262a824965aac025a427 upstream. The memory allocated in ipc_protocol_init() is not freed on the error paths that follow in ipc_imem_init(). Fix that by calling the corresponding release function ipc_protocol_deinit() in the error path. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 686b4283f82cd630fafd7ca9b03dfc080b3ec8fa Author: Muchun Song Date: Tue Apr 28 16:52:18 2026 +0800 drivers/base/memory: fix memory block reference leak in poison accounting commit 03a2cc1756a0570f887d624cd6c535ea0cbd4951 upstream. memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison. Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com Fixes: 5033091de814 ("mm/hwpoison: introduce per-memory_block hwpoison counter") Signed-off-by: Muchun Song Reviewed-by: Miaohe Lin Acked-by: Oscar Salvador Acked-by: David Hildenbrand (Arm) Cc: Danilo Krummrich Cc: Greg Kroah-Hartman Cc: "Huang, Ying" Cc: Naoya Horiguchi Cc: "Rafael J. Wysocki" Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 29cd94e678fcb3c4fd0f359deeac6d61334323fc Author: Ard Biesheuvel Date: Tue May 19 10:03:00 2026 +0200 efi: Allocate runtime workqueue before ACPI init commit 13c6da02e767152c9ac4330962247a5e47011035 upstream. Since commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") ACPI PRM calls are delegated to a workqueue which runs in a kernel thread, making it easier to detect and mitigate faulting memory accesses performed by the firmware. Rafael reports that such PRM accesses may occur before efisubsys_init() executes, which is where the workqueue is allocated, leading to NULL pointer dereferences. Since acpi_init() [which triggers the early PRM accesses] executes as a subsys_initcall() as well, and has its own dependencies that may be sensitive to initcall ordering, deferring acpi_init() is not an option. So instead, split off the workqueue allocation into its own postcore initcall, as this is the only missing piece to allow EFI runtime calls to be made. This ensures that EFI runtime call (including PRM calls) are accessible to all code running at subsys_initcall() level. Cc: Fixes: 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") Reviewed-by: Rafael J. Wysocki (Intel) Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 7b6f8c8eb93f02a74b1de8e521c0952af10d1f43 Author: Takashi Iwai Date: Fri May 15 10:55:58 2026 +0200 ALSA: asihpi: Fix potential OOB array access at reading cache commit 7b7d6572145c1dab2dd9bfb550b188e5f0ff3c3f upstream. find_control() to retrieve a cached info accesses the array with the given index blindly, which may lead to an OOB array access. Add a sanity check for avoiding it. Link: https://sashiko.dev/#/patchset/20260511230121.28606-1-rosenp%40gmail.com Cc: Link: https://patch.msgid.link/20260515085606.242284-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 41a766c647294842c9b17672449f8e011048cba9 Author: Takashi Iwai Date: Sun May 17 18:51:20 2026 +0200 ALSA: pcm: Don't setup bogus iov_iter for silencing commit e4d3386b74fba8e01280484b67ee481ece00201e upstream. At transition to the iov_iter for PCM data transfer, we blindly applied the iov_iter setup also for silencing (i.e. data = NULL), and it leads to a calculation of bogus iov_iter. Fortunately this didn't cause troubles on most of architectures but it goes wrong on RISC-V now, causing a NULL dereference. Handle the NULL data case to treat the silencing in interleaved_copy() for addressing the bug above. noninterleaved_copy() has already the NULL data handling, so it doesn't need changes. Reported-by: Jiakai Xu Closes: https://lore.kernel.org/20260515051516.3103036-1-xujiakai24@mails.ucas.ac.cn Fixes: cf393babb37a ("ALSA: pcm: Add copy ops with iov_iter") Cc: Link: https://patch.msgid.link/20260517165121.31399-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit dade81458966d8a11e590f2fa18da2c87f8b56c1 Author: Cássio Gabriel Date: Tue May 19 00:32:15 2026 -0300 ALSA: ua101: Reject too-short USB descriptors commit b59d5c51bb328a60749b4dd5fe7e649bfb4089b4 upstream. find_format_descriptor() walks the class-specific interface extras by advancing with bLength. It rejects descriptors that extend past the remaining buffer, but it does not reject descriptor lengths smaller than a USB descriptor header. Reject too-short descriptors before using bLength to advance the local scan. This keeps the UA-101 parser robust against malformed descriptor data and matches the usual USB descriptor walking rules. Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260519-alsa-ua101-desc-len-v1-1-4307d1a5e054@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 0dbf64c502443c08c2e28a77ecbfcc5479d93228 Author: Abdurrahman Hussain Date: Fri May 15 15:11:48 2026 -0700 hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX commit eee213daa1e1b402eb631bcd1b8c5aa340a6b081 upstream. adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-2-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit adcfb16ae402dbd6ebb71ec558dd6a3833c3d49e Author: ChenXiaoSong Date: Mon May 18 15:23:22 2026 +0000 smb/server: promote S_DEL_ON_CLS to S_DEL_PENDING when close commit 4ec9c8e023c79f613fe4d5ad8cc737112efb2e44 upstream. Reproducer: 1. server: systemctl start ksmbd 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: C program: openat(AT_FDCWD, "/mnt", O_RDWR | O_TMPFILE, 0600) Do not treat `FILE_DELETE_ON_CLOSE_LE` as delete pending while files remain open. This patch fixes xfstests generic/004. Cc: stable@vger.kernel.org Link: https://chenxiaosong.com/en/smb-xfstests-generic-004.html Co-developed-by: Huiwen He Signed-off-by: Huiwen He Signed-off-by: ChenXiaoSong Tested-by: Steve French Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 7df1df6f40c0720d30206aa35c0343b962350e0d Author: Henrique Carvalho Date: Thu May 14 20:18:25 2026 -0300 smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() commit 4d8690dace005a38e6dbde9ecce2da3ad85c7c41 upstream. Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked(). Cc: stable@vger.kernel.org Fixes: 96c4af418586 ("cifs: Fix locking usage for tcon fields") Reviewed-by: Shyam Prasad N Signed-off-by: Henrique Carvalho Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 9d378e17c864da08c3a4df41dae92cfa6468b00a Author: Ferry Meng Date: Mon May 11 21:18:16 2026 +0800 ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow commit af92ee994cc7f7e83a41c2025f32257a2f82a7ef upstream. Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak. Fixes: 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") Cc: stable@vger.kernel.org Signed-off-by: Ferry Meng Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit e43cb36d4d7827710cfcd48e95e29a507f0d87be Author: Jeremy Laratro Date: Wed May 13 08:26:16 2026 +0900 ksmbd: fix null pointer dereference in compare_guid_key() commit 4b83cbc4c15f09b000cc06f033f64b0824b6dc87 upstream. session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Cc: stable@vger.kernel.org Signed-off-by: Jeremy Laratro Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 082351f9d40007414ad6af062b3a26fa02fd4b5f Author: SeongJae Park Date: Sun Apr 26 10:36:12 2026 -0700 mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() commit d4e7b5c4cc353f154d5ab8bb2e1ce7714d77a6e9 upstream. damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260426173625.86521-1-sj@kernel.org Link: https://lore.kernel.org/20260423004148.74722-1-sj@kernel.org [1] Fixes: 29cbb9a13f05 ("mm/damon/sysfs-schemes: implement scheme filters") Signed-off-by: SeongJae Park Cc: # 6.3.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 31527d80234caf83dc96ad478645e57df9de4472 Author: Greg Kroah-Hartman Date: Wed May 20 15:05:04 2026 +0200 sysfs: don't remove existing directory on update failure commit 237557b8a81ab948e8332f7c0058e758f081c0a3 upstream. When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry. Cc: Rajat Jain Fixes: c855cf2759d2 ("sysfs: Fix internal_create_group() for named group updates") Cc: stable Assisted-by: gkh_clanker_t1000 Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Danilo Krummrich Link: https://patch.msgid.link/2026052003-uniquely-hastily-c093@gregkh Signed-off-by: Greg Kroah-Hartman commit ad7520628c74f2acaae57d7e8d2c731e2cbe73f7 Author: Sasha Levin Date: Wed May 27 13:04:10 2026 -0400 Revert "af_unix: Reject SIOCATMARK on non-stream sockets" This reverts commit 0d7e7235bc543c6ed7b873e3015db814d8e8c414. Signed-off-by: Sasha Levin commit f624070c322da351228b2ff3c639b1c99fb03797 Author: Sasha Levin Date: Wed May 27 13:03:59 2026 -0400 Revert "s390/cio: Update purge function to unregister the unused subchannels" This reverts commit c34b09cbd6fc06f0f234182e462a1b010d13a5a6. Signed-off-by: Sasha Levin commit 7963b6141b4cd59550e5fe7cf61dd97e4333e11b Author: Sasha Levin Date: Wed May 27 12:55:37 2026 -0400 Revert "ice: Remove jumbo_remove step from TX path" This reverts commit a753619ffecfe629ee73c821469edd8b37c72d3b. Signed-off-by: Sasha Levin commit 6331b0f7b71e6edf88a000414f84cf18462a12fa Author: Sasha Levin Date: Wed May 27 12:55:37 2026 -0400 Revert "ice: fix double-free of tx_buf skb" This reverts commit ca6f9d9aee5408c47e6c0fac10955cb6825ecd96. Signed-off-by: Sasha Levin commit 2035acfb17221729b1b8ac335e941868a04ca079 Author: Asim Viladi Oglu Manizada Date: Sat May 16 21:15:39 2026 +0000 smb: client: reject userspace cifs.spnego descriptions commit 3da1fdf4efbc490041eb4f836bf596201203f8f2 upstream. cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. Fixes: f1d662a7d5e5 ("[CIFS] Add upcall files for cifs to use spnego/kerberos") Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix Reviewed-by: David Howells Signed-off-by: Asim Viladi Oglu Manizada Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 3106f326f67c03dd9da4ca64663d11e40138cf40 Author: Kuniyuki Iwashima Date: Tue May 26 13:47:44 2026 +0800 af_unix: Give up GC if MSG_PEEK intervened. [ Upstream commit e5b31d988a41549037b8d8721a3c3cae893d8670 ] Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls. Fixes: 118f457da9ed ("af_unix: Remove lock dance in unix_peek_fds().") Reported-by: Igor Ushakov Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260311054043.1231316-1-kuniyu@google.com Signed-off-by: Jakub Kicinski [ Using include/net/af_unix.h instead of net/unix/af_unix.h on 6.6 ] Signed-off-by: Leon Chen Signed-off-by: Sasha Levin commit 3a436932eb397e909d0607d76a8325abd9d85a35 Author: DaeMyung Kang Date: Tue May 26 15:58:42 2026 +0800 ksmbd: close durable scavenger races against m_fp_list lookups [ Upstream commit bf736184d063da1a552ffeff0481813599a182cc ] ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. * checkpatch --strict * make -j$(nproc) M=fs/smb/server Fixes: d484d621d40f ("ksmbd: add durable scavenger timer") Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Alva Lan Signed-off-by: Sasha Levin commit 712cdf917e77a6444ce3836874829d770db20ee6 Author: Namjae Jeon Date: Tue May 26 15:58:41 2026 +0800 ksmbd: validate owner of durable handle on reconnect [ Upstream commit 49110a8ce654bbe56bef7c5e44cce31f4b102b8a ] Currently, ksmbd does not verify if the user attempting to reconnect to a durable handle is the same user who originally opened the file. This allows any authenticated user to hijack an orphaned durable handle by predicting or brute-forcing the persistent ID. According to MS-SMB2, the server MUST verify that the SecurityContext of the reconnect request matches the SecurityContext associated with the existing open. Add a durable_owner structure to ksmbd_file to store the original opener's UID, GID, and account name. and catpure the owner information when a file handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner() to validate the identity of the requester during SMB2_CREATE (DHnC). Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Reported-by: Davide Ornaghi Reported-by: Navaneeth K Signed-off-by: Namjae Jeon Signed-off-by: Steve French [ Minor context conflict resolved. ] Signed-off-by: Alva Lan Signed-off-by: Sasha Levin commit 7f0cb478703cbeaddfe5c9101c5c73cd975d1073 Author: Namjae Jeon Date: Tue May 26 15:58:40 2026 +0800 ksmbd: add durable scavenger timer [ Upstream commit d484d621d40f4a8b8959008802d79bef3609641b ] Launch ksmbd-durable-scavenger kernel thread to scan durable fps that have not been reclaimed by a client within the configured time. Signed-off-by: Namjae Jeon Signed-off-by: Steve French [ Minor context conflict resolved. ] Signed-off-by: Alva Lan Signed-off-by: Sasha Levin commit 50a23fa28e762c2cfcde6934ef0b83197e272af5 Author: Namjae Jeon Date: Tue May 26 15:58:39 2026 +0800 ksmbd: avoid reclaiming expired durable opens by the client [ Upstream commit 520da3c488c5bb177871634e713eb8a106082e6b ] The expired durable opens should not be reclaimed by client. This patch add ->durable_scavenger_timeout to fp and check it in ksmbd_lookup_durable_fd(). Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Alva Lan Signed-off-by: Sasha Levin commit 2682bf9a804b52a9490cfbc654d53f324e2c644d Author: Sasha Levin Date: Mon May 25 20:45:55 2026 -0400 Revert "x86/vdso: Fix output operand size of RDPID" This reverts commit db82a94b0c109e7697a593f36783e7ef36073983. Signed-off-by: Sasha Levin commit ba5b43db126a5e7378553869e3f7954d9187349f Author: Deepanshu Kartikey Date: Mon May 25 13:48:35 2026 +0800 wifi: mac80211: check tdls flag in ieee80211_tdls_oper [ Upstream commit 7d73872d949c488a1d7c308031d6a9d89b5e0a8b ] When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers. Reported-by: syzbot+56b6a844a4ea74487b7b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=56b6a844a4ea74487b7b Tested-by: syzbot+56b6a844a4ea74487b7b@syzkaller.appspotmail.com Suggested-by: Johannes Berg Signed-off-by: Deepanshu Kartikey Link: https://patch.msgid.link/20260313092417.520807-1-kartikey406@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Sasha Levin commit a052c2d8399a6fcffdef59aca13ecb5bf48e3bec Author: Pengpeng Hou Date: Thu May 21 10:28:34 2026 +0800 s390/debug: Reject zero-length input before trimming a newline [ Upstream commit c366a7b5ed7564e41345c380285bd3f6cb98971b ] debug_get_user_string() copies the userspace buffer into a newly allocated NUL-terminated buffer and then unconditionally looks at buffer[user_len - 1] to strip a trailing newline. A zero-length write reaches this helper unchanged, so the newline trim reads before the start of the allocated buffer. Reject empty writes before accessing the last input byte. Fixes: 66a464dbc8e0 ("[PATCH] s390: debug feature changes") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Reviewed-by: Benjamin Block Reviewed-by: Vasily Gorbik Tested-by: Vasily Gorbik Link: https://lore.kernel.org/r/20260417073530.96002-1-pengpeng@iscas.ac.cn Signed-off-by: Vasily Gorbik Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit 492349e5e4a369a8b62781100a3ade470bf1ce6b Author: Danilo Krummrich Date: Wed May 20 14:02:00 2026 +0000 driver core: platform: use generic driver_override infrastructure [ Upstream commit 2b38efc05bf7a8568ec74bfffea0f5cfa62bc01d ] When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1] Reported-by: Gui-Dong Han Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789 Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'") Reviewed-by: Greg Kroah-Hartman Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin Signed-off-by: David Sauerwein Signed-off-by: Sasha Levin commit 64a3ee535bd73f548975a1be6b0fa1f653a7e4c7 Author: Danilo Krummrich Date: Wed May 20 14:01:59 2026 +0000 driver core: generalize driver_override in struct device [ Upstream commit cb3d1049f4ea77d5ad93f17d8ac1f2ed4da70501 ] Currently, there are 12 busses (including platform and PCI) that duplicate the driver_override logic for their individual devices. All of them seem to be prone to the bug described in [1]. While this could be solved for every bus individually using a separate lock, solving this in the driver-core generically results in less (and cleaner) changes overall. Thus, move driver_override to struct device, provide corresponding accessors for busses and handle locking with a separate lock internally. In particular, add device_set_driver_override(), device_has_driver_override(), device_match_driver_override() and generalize the sysfs store() and show() callbacks via a driver_override feature flag in struct bus_type. Until all busses have migrated, keep driver_set_override() in place. Note that we can't use the device lock for the reasons described in [2]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789 [1] Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [2] Tested-by: Gui-Dong Han Co-developed-by: Gui-Dong Han Signed-off-by: Gui-Dong Han Reviewed-by: Greg Kroah-Hartman Link: https://patch.msgid.link/20260303115720.48783-2-dakr@kernel.org [ Use dev->bus instead of sp->bus for consistency; fix commit message to refer to the struct bus_type's driver_override feature flag. - Danilo ] Signed-off-by: Danilo Krummrich Stable-dep-of: 2b38efc05bf7 ("driver core: platform: use generic driver_override infrastructure") Signed-off-by: Sasha Levin Signed-off-by: David Sauerwein Signed-off-by: Sasha Levin commit fabfed1afe273717ea33b8aee46b767360edbb80 Author: Fabian Godehardt Date: Thu May 21 14:10:51 2026 +0800 spi: spidev: fix lock inversion between spi_lock and buf_lock [ Upstream commit 40534d19ed2afb880ecf202dab26a8e7a5808d16 ] The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour. Signed-off-by: Fabian Godehardt Link: https://patch.msgid.link/20260211072616.489522-1-fg@emlix.com Signed-off-by: Mark Brown [ Minor context conflict resolved. ] Signed-off-by: Wenshan Lan Signed-off-by: Sasha Levin commit 6a3af482188f6db4186d1605f64d911d7330abb3 Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:19:11 2026 +0200 mptcp: pm: ADD_ADDR rtx: free sk if last commit b7b9a461569734d33d3259d58d2507adfac107ed upstream. When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself". Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ Applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c. Also, there were conflicts, because commit 30549eebc4d8 ("mptcp: make ADD_ADDR retransmission timeout adaptive") is not in this version and changed the context. Also, other conflicts were due to newer patches being backported with resolved conflicts before this one. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit 9426265e157dd77ec237c795901ed4dea6d69b5c Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:19:10 2026 +0200 mptcp: pm: ADD_ADDR rtx: always decrease sk refcount commit 9634cb35af17019baec21ca648516ce376fa10e6 upstream. When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(). It should then be released in all cases at the end. Some (unlikely) checks were returning directly instead of calling sock_put() to decrease the refcount. Jump to a new 'exit' label to call __sock_put() (which will become sock_put() in the next commit) to fix this potential leak. While at it, drop the '!msk' check which cannot happen because it is never reset, and explicitly mark the remaining one as "unlikely". Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit 19a3ec9ef176acdbfccb0df1691cfba8d2989a3c Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:19:09 2026 +0200 mptcp: pm: ADD_ADDR rtx: allow ID 0 commit 03f324f3f1f7619a47b9c91282cb12775ab0a2f1 upstream. ADD_ADDR can be sent for the ID 0, which corresponds to the local address and port linked to the initial subflow. Indeed, this address could be removed, and re-added later on, e.g. what is done in the "delete re-add signal" MPTCP Join selftests. So no reason to ignore it. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-2-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit b386aa38b81dc2f7bfe35cc28db6734d8e28a89f Author: Gang Yan Date: Thu May 21 05:19:08 2026 +0200 mptcp: sync the msk->sndbuf at accept() time commit fcf04b14334641f4b0b8647824480935e9416d52 upstream. On passive MPTCP connections, the msk sndbuf is not updated correctly. The root cause is an order issue in the accept path: - tcp_check_req() -> subflow_syn_recv_sock() -> mptcp_sk_clone_init() calls __mptcp_propagate_sndbuf() to copy the ssk sndbuf into msk - Later, tcp_child_process() -> tcp_init_transfer() -> tcp_sndbuf_expand() grows the ssk sndbuf. So __mptcp_propagate_sndbuf() runs before the ssk sndbuf has been expanded and the msk ends up with a much smaller sndbuf than the subflow: MPTCP: msk->sndbuf:20480, msk->first->sndbuf:2626560 Fix this by moving the __mptcp_propagate_sndbuf() call from mptcp_sk_clone_init() -- the ssk sndbuf is not yet finalized there -- to __mptcp_propagate_sndbuf() at accept() time, when the ssk sndbuf has been fully expanded by tcp_sndbuf_expand(). Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/602 Signed-off-by: Gang Yan Acked-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-1-e3523e3aeb44@kernel.org Signed-off-by: Paolo Abeni [ No conflicts, but move __mptcp_propagate_sndbuf() above the for-loop (mptcp_for_each_subflow()) present in this version, which will modify 'subflow' used by __mptcp_propagate_sndbuf() in this new patch. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin