commit 7a137e9bfa0e1919555d60f9dc0c05a7a5ba75d0 Author: Greg Kroah-Hartman Date: Thu Feb 19 16:28:28 2026 +0100 Linux 6.6.127 Link: https://lore.kernel.org/r/20260217200004.221651386@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Peter Schneider Tested-by: Jon Hunter Tested-by: Brett A C Sheffield Tested-by: Mark Brown Tested-by: Francesco Dolcini Tested-by: Ron Economos Tested-by: Miguel Ojeda Signed-off-by: Greg Kroah-Hartman commit f478b8239d6564b20bbf2972e441c31f945a2b76 Author: Menglong Dong Date: Wed Oct 9 10:28:21 2024 +0800 net: tunnel: make skb_vlan_inet_prepare() return drop reasons [ Upstream commit 9990ddf47d4168088e2246c3d418bf526e40830d ] Make skb_vlan_inet_prepare return the skb drop reasons, which is just what pskb_may_pull_reason() returns. Meanwhile, adjust all the call of it. Signed-off-by: Menglong Dong Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 35ac888bf8aca1366a5b99531cccbc1a370d2d08 Author: Fabio Porcedda Date: Fri Jan 23 16:19:16 2026 +0100 USB: serial: option: add Telit FN920C04 RNDIS compositions commit 509f403f3ccec14188036212118651bf23599396 upstream. Add the following compositions: 0x10a1: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a1 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a6: RNDIS + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a6 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10ab: RNDIS + tty (AT) + tty (diag) + DPL (Data Packet Logging) + adb T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10ab Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=d128dba9 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit d4534a7f6c92baaf7e12a45fc6e37332cafafc33 Author: Chao Yu Date: Tue Feb 17 10:20:32 2026 -0500 f2fs: fix to avoid mapping wrong physical block for swapfile [ Upstream commit 5c145c03188bc9ba1c29e0bc4d527a5978fc47f9 ] Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F2FS-formatted userdata partition 2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng 3 Run swap stress test: (Android devices) adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60 --swap 0" Log: 1 Ftrace shows in kernel 6.6, only first extent is mapped during second f2fs_map_blocks call in check_swap_activate(): stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start blkaddr=0x43143, len=0x1 (Only 4KB mapped, not the full swapfile) 2 in kernel 6.1, both extents are correctly mapped: stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start blkaddr=0x13cd4, len=0x1 stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start blkaddr=0x60c84b, len=0xff The problematic code is in check_swap_activate(): if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec || nr_pblocks % blks_per_sec || !f2fs_valid_pinned_area(sbi, pblock)) { bool last_extent = false; not_aligned++; nr_pblocks = roundup(nr_pblocks, blks_per_sec); if (cur_lblock + nr_pblocks > sis->max) nr_pblocks -= blks_per_sec; /* this extent is last one */ if (!nr_pblocks) { nr_pblocks = last_lblock - cur_lblock; last_extent = true; } ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks); if (ret) { if (ret == -ENOENT) ret = -EINVAL; goto out; } if (!last_extent) goto retry; } When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec) exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The code then incorrectly assumes this is the last extent, sets nr_pblocks = last_lblock - cur_lblock (entire swapfile), and performs migration. After migration, it doesn't retry mapping, so subsequent extents are never processed. " In order to fix this issue, we need to lookup block mapping info after we migrate all blocks in the tail of swapfile. Cc: stable@kernel.org Fixes: 9703d69d9d15 ("f2fs: support file pinning for zoned devices") Cc: Daeho Jeong Reported-and-tested-by: Xiaolong Guo Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220951 Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim [ f2fs_is_sequential_zone_area() => !f2fs_valid_pinned_area() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 20a8bad29d18127890f7292f0638075103a21076 Author: Wenjie Qi Date: Tue Feb 17 10:20:31 2026 -0500 f2fs: fix zoned block device information initialization [ Upstream commit 0f9b12142be1af8555cfe53c6fbecb8e60a40dac ] If the max open zones of zoned devices are less than the active logs of F2FS, the device may error due to insufficient zone resources when multiple active logs are being written at the same time. Signed-off-by: Wenjie Qi Signed-off-by: Chao Yu Reviewed-by: Daeho Jeong Signed-off-by: Jaegeuk Kim Stable-dep-of: 5c145c03188b ("f2fs: fix to avoid mapping wrong physical block for swapfile") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit acc2c97fc0005846e5cf11b5ba3189fef130c9b3 Author: Chao Yu Date: Tue Feb 17 10:35:47 2026 -0500 f2fs: fix to avoid UAF in f2fs_write_end_io() [ Upstream commit ce2739e482bce8d2c014d76c4531c877f382aa54 ] As syzbot reported an use-after-free issue in f2fs_write_end_io(). It is caused by below race condition: loop device umount - worker_thread - loop_process_work - do_req_filebacked - lo_rw_aio - lo_rw_aio_complete - blk_mq_end_request - blk_update_request - f2fs_write_end_io - dec_page_count - folio_end_writeback - kill_f2fs_super - kill_block_super - f2fs_put_super : free(sbi) : get_pages(, F2FS_WB_CP_DATA) accessed sbi which is freed In kill_f2fs_super(), we will drop all page caches of f2fs inodes before call free(sbi), it guarantee that all folios should end its writeback, so it should be safe to access sbi before last folio_end_writeback(). Let's relocate ckpt thread wakeup flow before folio_end_writeback() to resolve this issue. Cc: stable@kernel.org Fixes: e234088758fc ("f2fs: avoid wait if IO end up when do_checkpoint for better performance") Reported-by: syzbot+b4444e3c972a7a124187@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b4444e3c972a7a124187 Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim [ folio => page ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 75e19da068adf0dc5dd269dd157392434b9117d4 Author: Yongpeng Yang Date: Tue Feb 17 10:45:24 2026 -0500 f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes [ Upstream commit 7633a7387eb4d0259d6bea945e1d3469cd135bbc ] During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed. Fixes: 608514deba38 ("f2fs: set fsync mark only for the last dnode") Cc: stable@kernel.org Signed-off-by: Sheng Yong Signed-off-by: Jinbao Liu Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ folio => page ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit eebd72cff518ac87e660aefb8a41224bd88c32ce Author: Yongpeng Yang Date: Wed Jan 7 10:33:46 2026 +0800 f2fs: fix out-of-bounds access in sysfs attribute read/write commit 98ea0039dbfdd00e5cc1b9a8afa40434476c0955 upstream. Some f2fs sysfs attributes suffer from out-of-bounds memory access and incorrect handling of integer values whose size is not 4 bytes. For example: vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out vm:~# cat /sys/fs/f2fs/vde/carve_out 65537 vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold 1 carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit integer. However, the sysfs interface allows setting it to a value larger than 255, resulting in an out-of-range update. atgc_age_threshold maps to {struct atgc_management}->age_threshold, which is a 64-bit integer, but its sysfs interface cannot correctly set values larger than UINT_MAX. The root causes are: 1. __sbi_store() treats all default values as unsigned int, which prevents updating integers larger than 4 bytes and causes out-of-bounds writes for integers smaller than 4 bytes. 2. f2fs_sbi_show() also assumes all default values are unsigned int, leading to out-of-bounds reads and incorrect access to integers larger than 4 bytes. This patch introduces {struct f2fs_attr}->size to record the actual size of the integer associated with each sysfs attribute. With this information, sysfs read and write operations can correctly access and update values according to their real data size, avoiding memory corruption and truncation. Fixes: b59d0bae6ca3 ("f2fs: add sysfs support for controlling the gc_thread") Cc: stable@kernel.org Signed-off-by: Jinbao Liu Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 81193503af1fb9102fdd0c5f906af4dc39551e21 Author: Zhiguo Niu Date: Fri Dec 26 10:56:04 2025 +0800 f2fs: fix to add gc count stat in f2fs_gc_range commit 761dac9073cd67d4705a94cd1af674945a117f4c upstream. It missed the stat count in f2fs_gc_range. Cc: stable@kernel.org Fixes: 9bf1dcbdfdc8 ("f2fs: fix to account gc stats correctly") Signed-off-by: Zhiguo Niu Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 0634e8d650993602fc5b389ff7ac525f6542e141 Author: Greg Kroah-Hartman Date: Sun Dec 28 14:17:03 2025 +0100 fbdev: smscufx: properly copy ioctl memory to kernelspace commit 120adae7b42faa641179270c067864544a50ab69 upstream. The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel. Reported-by: Tianchu Chen Cc: stable Cc: Steve Glendinning Cc: Helge Deller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 78daf5984d96edec3b920c72a93bd6821b8710b7 Author: Guangshuo Li Date: Sun Dec 7 15:25:32 2025 +0800 fbdev: rivafb: fix divide error in nv3_arb() commit 0209e21e3c372fa2da04c39214bec0b64e4eb5f4 upstream. A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit f42a2d49c46526cdfbfba95a61dd2caac69aff9b Author: Huacai Chen Date: Sat Jul 20 22:40:59 2024 +0800 LoongArch: Add writecombine support for DMW-based ioremap() commit 8e02c3b782ec64343f3cccc8dc5a8be2b379e80b upstream. Currently, only TLB-based ioremap() support writecombine, so add the counterpart for DMW-based ioremap() with help of DMW2. The base address (WRITECOMBINE_BASE) is configured as 0xa000000000000000. DMW3 is unused by kernel now, however firmware may leave garbage in them and interfere kernel's address mapping. So clear it as necessary. BTW, centralize the DMW configuration to macro SETUP_DMWINS. Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 6e5eccdef67ee879d7c0474c7e19e8b683f27dbe Author: Chen Ridong Date: Wed Jan 14 01:51:29 2026 +0000 cpuset: Fix missing adaptation for cpuset_is_populated Commit b1bcaed1e39a ("cpuset: Treat cpusets in attaching as populated") was backported to the long‑term support (LTS) branches. However, because commit d5cf4d34a333 ("cgroup/cpuset: Don't track # of local child partitions") was not backported, a corresponding adaptation to the backported code is still required. To ensure correct behavior, replace cgroup_is_populated with cpuset_is_populated in the partition_is_populated function. Cc: stable@vger.kernel.org # 6.1+ Fixes: b1bcaed1e39a ("cpuset: Treat cpusets in attaching as populated") Cc: Waiman Long Cc: Tejun Heo Signed-off-by: Chen Ridong Signed-off-by: Greg Kroah-Hartman commit ff37dd18ce7739a26aab0cc2d31006a45e6bde63 Author: David Hildenbrand (Red Hat) Date: Tue Dec 23 22:40:37 2025 +0100 mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather commit 8ce720d5bd91e9dc16db3604aa4b1bf76770a9a1 upstream. As reported, ever since commit 1013af4f585f ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race") we can end up in some situations where we perform so many IPI broadcasts when unsharing hugetlb PMD page tables that it severely regresses some workloads. In particular, when we fork()+exit(), or when we munmap() a large area backed by many shared PMD tables, we perform one IPI broadcast per unshared PMD table. There are two optimizations to be had: (1) When we process (unshare) multiple such PMD tables, such as during exit(), it is sufficient to send a single IPI broadcast (as long as we respect locking rules) instead of one per PMD table. Locking prevents that any of these PMD tables could get reused before we drop the lock. (2) When we are not the last sharer (> 2 users including us), there is no need to send the IPI broadcast. The shared PMD tables cannot become exclusive (fully unshared) before an IPI will be broadcasted by the last sharer. Concurrent GUP-fast could walk into a PMD table just before we unshared it. It could then succeed in grabbing a page from the shared page table even after munmap() etc succeeded (and supressed an IPI). But there is not difference compared to GUP-fast just sleeping for a while after grabbing the page and re-enabling IRQs. Most importantly, GUP-fast will never walk into page tables that are no-longer shared, because the last sharer will issue an IPI broadcast. (if ever required, checking whether the PUD changed in GUP-fast after grabbing the page like we do in the PTE case could handle this) So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather infrastructure so we can implement these optimizations and demystify the code at least a bit. Extend the mmu_gather infrastructure to be able to deal with our special hugetlb PMD table sharing implementation. To make initialization of the mmu_gather easier when working on a single VMA (in particular, when dealing with hugetlb), provide tlb_gather_mmu_vma(). We'll consolidate the handling for (full) unsharing of PMD tables in tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track in "struct mmu_gather" whether we had (full) unsharing of PMD tables. Because locking is very special (concurrent unsharing+reuse must be prevented), we disallow deferring flushing to tlb_finish_mmu() and instead require an explicit earlier call to tlb_flush_unshared_tables(). From hugetlb code, we call huge_pmd_unshare_flush() where we make sure that the expected lock protecting us from concurrent unsharing+reuse is still held. Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that tlb_flush_unshared_tables() was properly called earlier. Document it all properly. Notes about tlb_remove_table_sync_one() interaction with unsharing: There are two fairly tricky things: (1) tlb_remove_table_sync_one() is a NOP on architectures without CONFIG_MMU_GATHER_RCU_TABLE_FREE. Here, the assumption is that the previous TLB flush would send an IPI to all relevant CPUs. Careful: some architectures like x86 only send IPIs to all relevant CPUs when tlb->freed_tables is set. The relevant architectures should be selecting MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable kernels and it might have been problematic before this patch. Also, the arch flushing behavior (independent of IPIs) is different when tlb->freed_tables is set. Do we have to enlighten them to also take care of tlb->unshared_tables? So far we didn't care, so hopefully we are fine. Of course, we could be setting tlb->freed_tables as well, but that might then unnecessarily flush too much, because the semantics of tlb->freed_tables are a bit fuzzy. This patch changes nothing in this regard. (2) tlb_remove_table_sync_one() is not a NOP on architectures with CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync. Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB) we still issue IPIs during TLB flushes and don't actually need the second tlb_remove_table_sync_one(). This optimized can be implemented on top of this, by checking e.g., in tlb_remove_table_sync_one() whether we really need IPIs. But as described in (1), it really must honor tlb->freed_tables then to send IPIs to all relevant CPUs. Notes on TLB flushing changes: (1) Flushing for non-shared PMD tables We're converting from flush_hugetlb_tlb_range() to tlb_remove_huge_tlb_entry(). Given that we properly initialize the MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to __unmap_hugepage_range(), that should be fine. (2) Flushing for shared PMD tables We're converting from various things (flush_hugetlb_tlb_range(), tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range(). tlb_flush_pmd_range() achieves the same that tlb_remove_huge_tlb_entry() would achieve in these scenarios. Note that tlb_remove_huge_tlb_entry() also calls __tlb_remove_tlb_entry(), however that is only implemented on powerpc, which does not support PMD table sharing. Similar to (1), tlb_gather_mmu_vma() should make sure that TLB flushing keeps on working as expected. Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a concern, as we are holding the i_mmap_lock the whole time, preventing concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed separately as a cleanup later. There are plenty more cleanups to be had, but they have to wait until this is fixed. [david@kernel.org: fix kerneldoc] Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org Fixes: 1013af4f585f ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race") Signed-off-by: David Hildenbrand (Red Hat) Reported-by: "Uschakow, Stanislav" Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/ Tested-by: Laurence Oberman Acked-by: Harry Yoo Reviewed-by: Lorenzo Stoakes Cc: Lance Yang Cc: Liu Shixin Cc: Oscar Salvador Cc: Rik van Riel Cc: Signed-off-by: Andrew Morton Signed-off-by: David Hildenbrand (Arm) Signed-off-by: Greg Kroah-Hartman commit 2eeca9383efebb27c85a5ed12ba261c282f7a716 Author: David Hildenbrand (Red Hat) Date: Tue Dec 23 22:40:35 2025 +0100 mm/hugetlb: fix two comments related to huge_pmd_unshare() commit 3937027caecb4f8251e82dd857ba1d749bb5a428 upstream. Ever since we stopped using the page count to detect shared PMD page tables, these comments are outdated. The only reason we have to flush the TLB early is because once we drop the i_mmap_rwsem, the previously shared page table could get freed (to then get reallocated and used for other purpose). So we really have to flush the TLB before that could happen. So let's simplify the comments a bit. The "If we unshared PMDs, the TLB flush was not recorded in mmu_gather." part introduced as in commit a4a118f2eead ("hugetlbfs: flush TLBs correctly after huge_pmd_unshare") was confusing: sure it is recorded in the mmu_gather, otherwise tlb_flush_mmu_tlbonly() wouldn't do anything. So let's drop that comment while at it as well. We'll centralize these comments in a single helper as we rework the code next. Link: https://lkml.kernel.org/r/20251223214037.580860-3-david@kernel.org Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: David Hildenbrand (Red Hat) Reviewed-by: Rik van Riel Tested-by: Laurence Oberman Reviewed-by: Lorenzo Stoakes Acked-by: Oscar Salvador Reviewed-by: Harry Yoo Cc: Liu Shixin Cc: Lance Yang Cc: "Uschakow, Stanislav" Cc: Signed-off-by: Andrew Morton Signed-off-by: David Hildenbrand (Arm) Signed-off-by: Greg Kroah-Hartman commit 51dcf459845fd28f5a0d83d408a379b274ec5cc5 Author: David Hildenbrand (Red Hat) Date: Tue Dec 23 22:40:34 2025 +0100 mm/hugetlb: fix hugetlb_pmd_shared() commit ca1a47cd3f5f4c46ca188b1c9a27af87d1ab2216 upstream. Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared(). Link: https://lkml.kernel.org/r/20251223214037.580860-1-david@kernel.org Link: https://lkml.kernel.org/r/20251223214037.580860-2-david@kernel.org Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [1] Link: https://lore.kernel.org/all/8cab934d-4a56-44aa-b641-bfd7e23bd673@kernel.org/ [2] Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: David Hildenbrand (Red Hat) Reviewed-by: Rik van Riel Reviewed-by: Lance Yang Tested-by: Lance Yang Reviewed-by: Harry Yoo Tested-by: Laurence Oberman Reviewed-by: Lorenzo Stoakes Acked-by: Oscar Salvador Cc: Liu Shixin Cc: "Uschakow, Stanislav" Cc: Signed-off-by: Andrew Morton Signed-off-by: David Hildenbrand (Arm) Signed-off-by: Greg Kroah-Hartman commit 8c9a1b0710510c3cc25526c815ca798705cb1936 Author: Jane Chu Date: Mon Sep 15 18:45:20 2025 -0600 mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count commit 14967a9c7d247841b0312c48dcf8cd29e55a4cc8 upstream. commit 59d9094df3d79 ("mm: hugetlb: independent PMD page table shared count") introduced ->pt_share_count dedicated to hugetlb PMD share count tracking, but omitted fixing copy_hugetlb_page_range(), leaving the function relying on page_count() for tracking that no longer works. When lazy page table copy for hugetlb is disabled, that is, revert commit bcd51a3c679d ("hugetlb: lazy page table copies in fork()") fork()'ing with hugetlb PMD sharing quickly lockup - [ 239.446559] watchdog: BUG: soft lockup - CPU#75 stuck for 27s! [ 239.446611] RIP: 0010:native_queued_spin_lock_slowpath+0x7e/0x2e0 [ 239.446631] Call Trace: [ 239.446633] [ 239.446636] _raw_spin_lock+0x3f/0x60 [ 239.446639] copy_hugetlb_page_range+0x258/0xb50 [ 239.446645] copy_page_range+0x22b/0x2c0 [ 239.446651] dup_mmap+0x3e2/0x770 [ 239.446654] dup_mm.constprop.0+0x5e/0x230 [ 239.446657] copy_process+0xd17/0x1760 [ 239.446660] kernel_clone+0xc0/0x3e0 [ 239.446661] __do_sys_clone+0x65/0xa0 [ 239.446664] do_syscall_64+0x82/0x930 [ 239.446668] ? count_memcg_events+0xd2/0x190 [ 239.446671] ? syscall_trace_enter+0x14e/0x1f0 [ 239.446676] ? syscall_exit_work+0x118/0x150 [ 239.446677] ? arch_exit_to_user_mode_prepare.constprop.0+0x9/0xb0 [ 239.446681] ? clear_bhb_loop+0x30/0x80 [ 239.446684] ? clear_bhb_loop+0x30/0x80 [ 239.446686] entry_SYSCALL_64_after_hwframe+0x76/0x7e There are two options to resolve the potential latent issue: 1. warn against PMD sharing in copy_hugetlb_page_range(), 2. fix it. This patch opts for the second option. While at it, simplify the comment, the details are not actually relevant anymore. Link: https://lkml.kernel.org/r/20250916004520.1604530-1-jane.chu@oracle.com Fixes: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: Jane Chu Reviewed-by: Harry Yoo Acked-by: Oscar Salvador Acked-by: David Hildenbrand Cc: Jann Horn Cc: Liu Shixin Cc: Muchun Song Signed-off-by: Andrew Morton Signed-off-by: David Hildenbrand (Arm) Signed-off-by: Greg Kroah-Hartman commit 168ee1549fa24fff2ab924a2ca7b1d85f30e062d Author: Daniel Borkmann Date: Mon Feb 16 22:31:13 2026 +0100 Revert "wireguard: device: enable threaded NAPI" This reverts commit 8c9e9cd398777fd60ba202211da1110614cb5bc5 which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits early with work_done = 0 and calls napi_complete_done, signalling it "finished" processing. 11) The assumption in wg_packet_decrypt_worker is that when the decryption finished the subsequent napi_schedule will always lead to a later invocation of wg_packet_rx_poll to pick up the finished packet. 12) However, it appears that a later napi_schedule does /not/ schedule a later poll and thus no wg_packet_rx_poll. 13) If this situation happens exactly for the corner case where the decryption worker of the first packet is stuck and waiting to be scheduled, and the network load for WireGuard is very high then the queue can build up to MAX_QUEUED_PACKETS. 14) If this situation occurs, then no new decryption worker will be scheduled and also no new napi_schedule to make forward progress. 15) This means the peer->rx_queue stops processing packets completely and they are indefinitely stuck waiting for a new NAPI poll on that peer which never happens. New packets for that peer are then dropped due to full queue, as it has been observed on the production machines. Technically, the backport of commit db9ae3b6b43c ("wireguard: device: enable threaded NAPI") to stable should not have happened since it is more of an optimization rather than a pure fix and addresses a NAPI situation with utilizing many WireGuard tunnel devices in parallel. Revert it from stable given the backport triggers a regression for mentioned kernels. Signed-off-by: Daniel Borkmann Acked-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman commit 78e706f9b1977ff7a86c4b49dd1fac5e1ea71c48 Author: Tiezhu Yang Date: Tue Feb 10 19:31:17 2026 +0800 LoongArch: Rework KASAN initialization for PTW-enabled systems commit 5ec5ac4ca27e4daa234540ac32f9fc5219377d53 upstream. kasan_init_generic() indicates that kasan is fully initialized, so it should be put at end of kasan_init(). Otherwise bringing up the primary CPU failed when CONFIG_KASAN is set on PTW-enabled systems, here are the call chains: kernel_entry() start_kernel() setup_arch() kasan_init() kasan_init_generic() The reason is PTW-enabled systems have speculative accesses which means memory accesses to the shadow memory after kasan_init() may be executed by hardware before. However, accessing shadow memory is safe only after kasan fully initialized because kasan_init() uses a temporary PGD table until we have populated all levels of shadow page tables and writen the PGD register. Moving kasan_init_generic() later can defer the occasion of kasan_enabled(), so as to avoid speculative accesses on shadow pages. After moving kasan_init_generic() to the end, kasan_init() can no longer call kasan_mem_to_shadow() for shadow address conversion because it will always return kasan_early_shadow_page. On the other hand, we should keep the current logic of kasan_mem_to_shadow() for both the early and final stage because there may be instrumentation before kasan_init(). To solve this, we factor out a new mem_to_shadow() function from current kasan_mem_to_shadow() for the shadow address conversion in kasan_init(). Cc: stable@vger.kernel.org Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen [ Huacai: To backport from upstream to 6.6 & 6.12, kasan_enabled() is replaced with kasan_arch_is_ready() and kasan_init_generic() is replaced with "kasan_early_stage = false". ] Signed-off-by: Greg Kroah-Hartman commit f507fc06c7cd440724f740dd29f6f1d7046b862e Author: Kanglong Wang Date: Tue Nov 12 16:35:39 2024 +0800 LoongArch: Add WriteCombine shadow mapping in KASAN commit 139d42ca51018c1d43ab5f35829179f060d1ab31 upstream. Currently, the kernel couldn't boot when ARCH_IOREMAP, ARCH_WRITECOMBINE and KASAN are enabled together. Because DMW2 is used by kernel now which is configured as 0xa000000000000000 for WriteCombine, but KASAN has no segment mapping for it. This patch fix this issue. Solution: Add the relevant definitions for WriteCombine (DMW2) in KASAN. Cc: stable@vger.kernel.org Fixes: 8e02c3b782ec ("LoongArch: Add writecombine support for DMW-based ioremap()") Signed-off-by: Kanglong Wang Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 16f137fb74c178799271cb7c34e2eebe7dc0651f Author: Alban Bedel Date: Thu Jan 29 15:59:44 2026 +0100 gpiolib: acpi: Fix gpio count with string references [ Upstream commit c62e0658d458d8f100445445c3ddb106f3824a45 ] Since commit 9880702d123f2 ("ACPI: property: Support using strings in reference properties") it is possible to use strings instead of local references. This work fine with single GPIO but not with arrays as acpi_gpio_package_count() didn't handle this case. Update it to handle strings like local references to cover this case as well. Signed-off-by: Alban Bedel Reviewed-by: Mika Westerberg Link: https://patch.msgid.link/20260129145944.3372777-1-alban.bedel@lht.dlh.de Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 61e007657bf7740d54ca2aadce0fb5997839818e Author: Ziyi Guo Date: Mon Feb 2 17:41:12 2026 +0000 ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put() [ Upstream commit f514248727606b9087bc38a284ff686e0093abf1 ] fsl_xcvr_activate_ctl() has lockdep_assert_held(&card->snd_card->controls_rwsem), but fsl_xcvr_mode_put() calls it without acquiring this lock. Other callers of fsl_xcvr_activate_ctl() in fsl_xcvr_startup() and fsl_xcvr_shutdown() properly acquire the lock with down_read()/up_read(). Add the missing down_read()/up_read() calls around fsl_xcvr_activate_ctl() in fsl_xcvr_mode_put() to fix the lockdep assertion and prevent potential race conditions when multiple userspace threads access the control. Signed-off-by: Ziyi Guo Link: https://patch.msgid.link/20260202174112.2018402-1-n7l8m4@u.northwestern.edu Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit f49d2497da140a4dbb7d6373264553ea04b37691 Author: Charles Keepax Date: Fri Jan 30 15:09:27 2026 +0000 ASoC: cs42l43: Correct handling of 3-pole jack load detection [ Upstream commit e77a4081d7e324dfa876a9560b2a78969446ba82 ] The load detection process for 3-pole jacks requires slightly updated reference values to ensure an accurate result. Update the code to apply different tunings for the 3-pole and 4-pole cases. This also updates the thresholds overall so update the relevant comments to match. Signed-off-by: Charles Keepax Link: https://patch.msgid.link/20260130150927.2964664-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 329bb274a3a9144d2fe5a16cdc9b3b05000116b3 Author: Rafael J. Wysocki Date: Tue Jan 20 16:43:44 2026 +0100 platform/x86: panasonic-laptop: Fix sysfs group leak in error path [ Upstream commit 43b0b7eff4b3fb684f257d5a24376782e9663465 ] The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group if platform_device_register_simple() fails for the "panasonic" platform device. Address this by making it call sysfs_remove_group() in that case for the group in question. Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit e8f5d1306a3a5516fe699039614040c084bd6341 Author: gongqi <550230171hxy@gmail.com> Date: Thu Jan 22 23:55:00 2026 +0800 platform/x86/amd/pmc: Add quirk for MECHREVO Wujie 15X Pro [ Upstream commit 2b4e00d8e70ca8736fda82447be6a4e323c6d1f5 ] The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to the AMD PMC. Add it to the quirk list to use the spurious_8042 fix. Signed-off-by: gongqi <550230171hxy@gmail.com> Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit c3876edb0184338fcfc6c30c92ff286e68b74547 Author: Dirk Su Date: Thu Jan 29 14:50:19 2026 +0800 ASoC: amd: yc: Add quirk for HP 200 G2a 16 [ Upstream commit 611c7d2262d5645118e0b3a9a88475d35a8366f2 ] Fix the missing mic on HP 200 G2a 16 by adding quirk with the board ID 8EE4 Signed-off-by: Dirk Su Link: https://patch.msgid.link/20260129065038.39349-1-dirk.su@canonical.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d7d7b93aca648d991a8343f42388a910c5c13641 Author: Tagir Garaev Date: Sun Feb 1 15:17:28 2026 +0300 ASoC: Intel: sof_es8336: Add DMI quirk for Huawei BOD-WXX9 [ Upstream commit 6b641122d31f9d33e7d60047ee0586d1659f3f54 ] Add DMI entry for Huawei Matebook D (BOD-WXX9) with HEADPHONE_GPIO and DMIC quirks. This device has ES8336 codec with: - GPIO 16 (headphone-enable) for headphone amplifier control - GPIO 17 (speakers-enable) for speaker amplifier control - GPIO 269 for jack detection IRQ - 2-channel DMIC Hardware investigation shows that both GPIO 16 and 17 are required for proper audio routing, as headphones and speakers share the same physical output (HPOL/HPOR) and are separated only via amplifier enable signals. RFC: Seeking advice on GPIO control issue: GPIO values change in driver (gpiod_get_value() shows logical value changes) but not physically (debugfs gpio shows no change). The same gpiod_set_value_cansleep() calls work correctly in probe context with msleep(), but fail when called from DAPM event callbacks. Context information from diagnostics: - in_atomic=0, in_interrupt=0, irqs_disabled=0 - Process context: pipewire - GPIO 17 (speakers): changes in driver, no physical change - GPIO 16 (headphone): changes in driver, no physical change In Windows, audio switching works without visible GPIO changes, suggesting possible ACPI/firmware involvement. Any suggestions on how to properly control these GPIOs from DAPM events would be appreciated. Signed-off-by: Tagir Garaev Link: https://patch.msgid.link/20260201121728.16597-1-tgaraev653@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 9cf4b9b8ad09d6e05307abc4e951cabdff4be652 Author: Rafael J. Wysocki Date: Mon Jan 26 21:02:40 2026 +0100 platform/x86: classmate-laptop: Add missing NULL pointer checks [ Upstream commit fe747d7112283f47169e9c16e751179a9b38611e ] In a few places in the Classmate laptop driver, code using the accel object may run before that object's address is stored in the driver data of the input device using it. For example, cmpc_accel_sensitivity_store_v4() is the "show" method of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(), before calling dev_set_drvdata() for inputdev->dev. If the sysfs attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev) call in in cmpc_accel_sensitivity_store_v4() returns NULL which leads to a NULL pointer dereference going forward. Moreover, sysfs attributes using the input device are added before initializing that device by cmpc_add_acpi_notify_device() and if one of them is accessed before running that function, a NULL pointer dereference will occur. For example, cmpc_accel_sensitivity_attr_v4 is added before calling cmpc_add_acpi_notify_device() and if it is read prematurely, the dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4() returns NULL which leads to a NULL pointer dereference going forward. Fix this by adding NULL pointer checks in all of the relevant places. Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/12825381.O9o76ZdvQC@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit e120bae4c56d162f38e23ba67097077bf3e43cdd Author: Brahmajit Das Date: Tue Sep 2 02:50:20 2025 +0530 drm/tegra: hdmi: sor: Fix error: variable ‘j’ set but not used [ Upstream commit 1beee8d0c263b3e239c8d6616e4f8bb700bed658 ] The variable j is set, however never used in or outside the loop, thus resulting in dead code. Building with GCC 16 results in a build error due to -Werror=unused-but-set-variable= enabled by default. This patch clean up the dead code and fixes the build error. Example build log: drivers/gpu/drm/tegra/sor.c:1867:19: error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=] 1867 | size_t i, j; | ^ Signed-off-by: Brahmajit Das Signed-off-by: Thierry Reding Link: https://lore.kernel.org/r/20250901212020.3757519-1-listout@listout.xyz Signed-off-by: Sasha Levin commit cbd9931e6456822067725354d83446c5bb813030 Author: Deepanshu Kartikey Date: Tue Jan 13 14:10:37 2026 +0530 romfs: check sb_set_blocksize() return value [ Upstream commit ab7ad7abb3660c58ffffdf07ff3bb976e7e0afa0 ] romfs_fill_super() ignores the return value of sb_set_blocksize(), which can fail if the requested block size is incompatible with the block device's configuration. This can be triggered by setting a loop device's block size larger than PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs filesystem on that device. When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the device has logical_block_size=32768, bdev_validate_blocksize() fails because the requested size is smaller than the device's logical block size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and continues mounting. The superblock's block size remains at the device's logical block size (32768). Later, when sb_bread() attempts I/O with this oversized block size, it triggers a kernel BUG in folio_set_bh(): kernel BUG at fs/buffer.c:1582! BUG_ON(size > PAGE_SIZE); Fix by checking the return value of sb_set_blocksize() and failing the mount with -EINVAL if it returns 0. Reported-by: syzbot+9c4e33e12283d9437c25@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9c4e33e12283d9437c25 Signed-off-by: Deepanshu Kartikey Link: https://patch.msgid.link/20260113084037.1167887-1-kartikey406@gmail.com Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 79100c3bc0c4679df3bb63a46e51b5124351a9fd Author: Ricardo Rivera-Matos Date: Thu Jan 15 19:25:10 2026 +0000 ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel [ Upstream commit 6dd0fdc908c02318c28ec2c0979661846ee0a9f7 ] ASP_TX5 was incorrectly mapped to a channel value of 3 corrects, the channel value of 4. Reviewed-by: Charles Keepax Signed-off-by: Ricardo Rivera-Matos Link: https://patch.msgid.link/20260115192523.1335742-2-rriveram@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 6834804ad484fabbc6bc994a77110f8d52cfe179 Author: Zhang Heng Date: Mon Jan 26 15:35:08 2026 +0800 ALSA: hda/realtek: Add quirk for Inspur S14-G1 [ Upstream commit 9e18920e783d0bcd4c127a7adc66565243ab9655 ] Inspur S14-G1 is equipped with ALC256. Enable "power saving mode" and Enable "headset jack mode". Signed-off-by: Zhang Heng Link: https://patch.msgid.link/20260126073508.3897461-2-zhangheng@kylinos.cn Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit b204c5ec24a238f5d06cfa688fb3b80d1afdb91c Author: Xuewen Yan Date: Mon Jan 26 17:42:09 2026 +0800 gpio: sprd: Change sprd_gpio lock to raw_spin_lock [ Upstream commit 96313fcc1f062ba239f4832c9eff685da6c51c99 ] There was a lockdep warning in sprd_gpio: [ 6.258269][T329@C6] [ BUG: Invalid wait context ] [ 6.258270][T329@C6] 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 Tainted: G W OE [ 6.258272][T329@C6] ----------------------------- [ 6.258273][T329@C6] modprobe/329 is trying to lock: [ 6.258275][T329@C6] ffffff8081c91690 (&sprd_gpio->lock){....}-{3:3}, at: sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd] [ 6.258282][T329@C6] other info that might help us debug this: [ 6.258283][T329@C6] context-{5:5} [ 6.258285][T329@C6] 3 locks held by modprobe/329: [ 6.258286][T329@C6] #0: ffffff808baca108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xc4/0x204 [ 6.258295][T329@C6] #1: ffffff80965e7240 (request_class#4){+.+.}-{4:4}, at: __setup_irq+0x1cc/0x82c [ 6.258304][T329@C6] #2: ffffff80965e70c8 (lock_class#4){....}-{2:2}, at: __setup_irq+0x21c/0x82c [ 6.258313][T329@C6] stack backtrace: [ 6.258314][T329@C6] CPU: 6 UID: 0 PID: 329 Comm: modprobe Tainted: G W OE 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 PREEMPT 3ad5b0f45741a16e5838da790706e16ceb6717df [ 6.258316][T329@C6] Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 6.258317][T329@C6] Hardware name: Unisoc UMS9632-base Board (DT) [ 6.258318][T329@C6] Call trace: [ 6.258318][T329@C6] show_stack+0x20/0x30 (C) [ 6.258321][T329@C6] __dump_stack+0x28/0x3c [ 6.258324][T329@C6] dump_stack_lvl+0xac/0xf0 [ 6.258326][T329@C6] dump_stack+0x18/0x3c [ 6.258329][T329@C6] __lock_acquire+0x824/0x2c28 [ 6.258331][T329@C6] lock_acquire+0x148/0x2cc [ 6.258333][T329@C6] _raw_spin_lock_irqsave+0x6c/0xb4 [ 6.258334][T329@C6] sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd 814535e93c6d8e0853c45c02eab0fa88a9da6487] [ 6.258337][T329@C6] irq_startup+0x238/0x350 [ 6.258340][T329@C6] __setup_irq+0x504/0x82c [ 6.258342][T329@C6] request_threaded_irq+0x118/0x184 [ 6.258344][T329@C6] devm_request_threaded_irq+0x94/0x120 [ 6.258347][T329@C6] sc8546_init_irq+0x114/0x170 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99] [ 6.258352][T329@C6] sc8546_charger_probe+0x53c/0x5a0 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99] [ 6.258358][T329@C6] i2c_device_probe+0x2c8/0x350 [ 6.258361][T329@C6] really_probe+0x1a8/0x46c [ 6.258363][T329@C6] __driver_probe_device+0xa4/0x10c [ 6.258366][T329@C6] driver_probe_device+0x44/0x1b4 [ 6.258369][T329@C6] __driver_attach+0xd0/0x204 [ 6.258371][T329@C6] bus_for_each_dev+0x10c/0x168 [ 6.258373][T329@C6] driver_attach+0x2c/0x3c [ 6.258376][T329@C6] bus_add_driver+0x154/0x29c [ 6.258378][T329@C6] driver_register+0x70/0x10c [ 6.258381][T329@C6] i2c_register_driver+0x48/0xc8 [ 6.258384][T329@C6] init_module+0x28/0xfd8 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99] [ 6.258389][T329@C6] do_one_initcall+0x128/0x42c [ 6.258392][T329@C6] do_init_module+0x60/0x254 [ 6.258395][T329@C6] load_module+0x1054/0x1220 [ 6.258397][T329@C6] __arm64_sys_finit_module+0x240/0x35c [ 6.258400][T329@C6] invoke_syscall+0x60/0xec [ 6.258402][T329@C6] el0_svc_common+0xb0/0xe4 [ 6.258405][T329@C6] do_el0_svc+0x24/0x30 [ 6.258407][T329@C6] el0_svc+0x54/0x1c4 [ 6.258409][T329@C6] el0t_64_sync_handler+0x68/0xdc [ 6.258411][T329@C6] el0t_64_sync+0x1c4/0x1c8 This is because the spin_lock would change to rt_mutex in PREEMPT_RT, however the sprd_gpio->lock would use in hard-irq, this is unsafe. So change the spin_lock_t to raw_spin_lock_t to use the spinlock in hard-irq. Signed-off-by: Xuewen Yan Reviewed-by: Baolin Wang Reviewed-by: Sebastian Andrzej Siewior Link: https://lore.kernel.org/r/20260126094209.9855-1-xuewen.yan@unisoc.com [Bartosz: tweaked the commit message] Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 4cfb1aed47539626e4310652fef8bb13ad4d6154 Author: Anatolii Shirykalov Date: Mon Jan 19 15:56:18 2026 +0100 ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list [ Upstream commit 018b211b1d321a52ed8d8de74ce83ce52a2e1224 ] Add ASUS ExpertBook PM1503CDA to the DMI quirks table to enable internal DMIC support via the ACP6x machine driver. Signed-off-by: Anatolii Shirykalov Link: https://patch.msgid.link/20260119145618.3171435-1-pipocavsobake@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 2accd79be906f2ea16b2e7205b136296f564a63e Author: Tim Guttzeit Date: Mon Jan 19 16:15:55 2026 +0100 ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU [ Upstream commit b48fe9af1e60360baf09ca6b7a3cd6541f16e611 ] Add a PCI quirk to enable microphone detection on the headphone jack of TongFang X6AR55xU devices. Signed-off-by: Tim Guttzeit Signed-off-by: Werner Sembach Link: https://patch.msgid.link/20260119151626.35481-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit b1983840287303e0dfb401b1b6cecc5ea7471e90 Author: Gui-Dong Han Date: Fri Feb 13 11:22:29 2026 -0500 bus: fsl-mc: fix use-after-free in driver_override_show() [ Upstream commit 148891e95014b5dc5878acefa57f1940c281c431 ] The driver_override_show() function reads the driver_override string without holding the device_lock. However, driver_override_store() uses driver_set_override(), which modifies and frees the string while holding the device_lock. This can result in a concurrent use-after-free if the string is freed by the store function while being read by the show function. Fix this by holding the device_lock around the read operation. Fixes: 1f86a00c1159 ("bus/fsl-mc: add support for 'driver_override' in the mc-bus") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han Reviewed-by: Ioana Ciornei Link: https://lore.kernel.org/r/20251202174438.12658-1-hanguidong02@gmail.com Signed-off-by: Christophe Leroy (CS GROUP) Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3118a9c6875b8318f35123e7923783a0ab248a3a Author: Chelsy Ratnawat Date: Fri Feb 13 11:22:28 2026 -0500 bus: fsl-mc: Replace snprintf and sprintf with sysfs_emit in sysfs show functions [ Upstream commit a50522c805a6c575c80f41b04706e084d814e116 ] Use sysfs_emit() instead of snprintf()/sprintf() when writing to sysfs buffers, as recommended by the kernel documentation. Signed-off-by: Chelsy Ratnawat Acked-by: Ioana Ciornei Link: https://lore.kernel.org/r/20250822124339.1739290-1-chelsyratnawat2001@gmail.com Signed-off-by: Christophe Leroy Stable-dep-of: 148891e95014 ("bus: fsl-mc: fix use-after-free in driver_override_show()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8cb905eca73944089a0db01443c7628a9e87012d Author: Liu Song Date: Fri Feb 13 20:49:23 2026 -0500 PCI: endpoint: Avoid creating sub-groups asynchronously [ Upstream commit 7c5c7d06bd1f86d2c3ebe62be903a4ba42db4d2c ] The asynchronous creation of sub-groups by a delayed work could lead to a NULL pointer dereference when the driver directory is removed before the work completes. The crash can be easily reproduced with the following commands: # cd /sys/kernel/config/pci_ep/functions/pci_epf_test # for i in {1..20}; do mkdir test && rmdir test; done BUG: kernel NULL pointer dereference, address: 0000000000000088 ... Call Trace: configfs_register_group+0x3d/0x190 pci_epf_cfs_work+0x41/0x110 process_one_work+0x18f/0x350 worker_thread+0x25a/0x3a0 Fix this issue by using configfs_add_default_group() API which does not have the deadlock problem as configfs_register_group() and does not require the delayed work handler. Fixes: e85a2d783762 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF") Signed-off-by: Liu Song [mani: slightly reworded the description and added stable list] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Cc: stable@kernel.org Link: https://patch.msgid.link/20250710143845409gLM6JdlwPhlHG9iX3F6jK@zte.com.cn Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 68c9fdb01af8ac31bc046268235fceb77c6c1ddd Author: Christophe JAILLET Date: Fri Feb 13 20:49:22 2026 -0500 PCI: endpoint: Remove unused field in struct pci_epf_group [ Upstream commit 328e4dffbeecc0f2cc5a149dee6c11a0577c9671 ] In "struct pci_epf_group", the 'type_group' field is unused. This was added, but already unused, by commit 70b3740f2c19 ("PCI: endpoint: Automatically create a function specific attributes group"). Thus, remove it. Found with cppcheck, unusedStructMember. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/6507d44b6c60a19af35a605e2d58050be8872ab6.1712341008.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Stable-dep-of: 7c5c7d06bd1f ("PCI: endpoint: Avoid creating sub-groups asynchronously") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 74e7458537cd9349cf019862e51491f670871707 Author: Anil Gurumurthy Date: Wed Dec 10 15:46:03 2025 +0530 scsi: qla2xxx: Fix bsg_done() causing double free commit c2c68225b1456f4d0d393b5a8778d51bb0d5b1d0 upstream. Kernel panic observed on system, [5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000 [5353358.825194] #PF: supervisor write access in kernel mode [5353358.825195] #PF: error_code(0x0002) - not-present page [5353358.825196] PGD 100006067 P4D 0 [5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI [5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1 [5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025 [5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10 [5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246 [5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000 [5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000 [5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000 [5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090 [5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000 [5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000 [5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0 [5353358.825221] PKRU: 55555554 [5353358.825222] Call Trace: [5353358.825223] [5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df [5353358.825232] ? sg_copy_buffer+0xc8/0x110 [5353358.825236] ? __die_body.cold+0x8/0xd [5353358.825238] ? page_fault_oops+0x134/0x170 [5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110 [5353358.825244] ? exc_page_fault+0xa8/0x150 [5353358.825247] ? asm_exc_page_fault+0x22/0x30 [5353358.825252] ? memcpy_erms+0x6/0x10 [5353358.825253] sg_copy_buffer+0xc8/0x110 [5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx] [5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx] Most routines in qla_bsg.c call bsg_done() only for success cases. However a few invoke it for failure case as well leading to a double free. Validate before calling bsg_done(). Cc: stable@vger.kernel.org Signed-off-by: Anil Gurumurthy Signed-off-by: Nilesh Javali Reviewed-by: Himanshu Madhani Link: https://patch.msgid.link/20251210101604.431868-12-njavali@marvell.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman