commit ae593cd8579f0207305263afd7adee01ffab7fb7 Author: Greg Kroah-Hartman Date: Mon Dec 1 11:46:09 2025 +0100 Linux 6.17.10 Link: https://lore.kernel.org/r/20251127150348.216197881@linuxfoundation.org Tested-by: Ronald Warsow Tested-by: Brett A C Sheffield Tested-by: Peter Schneider Tested-by: Linux Kernel Functional Testing Tested-by: Dileep Malepu Tested-by: Ron Economos Tested-by: Salvatore Bonaccorso Tested-by: Pavel Machek (CIP) Tested-by: Takeshi Ogasawara Tested-by: Mark Brown Tested-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit d45e929de08995ae06ede491b440571829ccf166 Author: Charles Keepax Date: Tue Nov 25 10:29:24 2025 +0000 Revert "gpio: swnode: don't use the swnode's name as the key for GPIO lookup" This reverts commit 25decf0469d4c91d90aa2e28d996aed276bfc622. This software node change doesn't actually fix any current issues with the kernel, it is an improvement to the lookup process rather than fixing a live bug. It also causes a couple of regressions with shipping laptops, which relied on the label based lookup. There is a fix for the regressions in mainline, the first 5 patches of [1]. However, those patches are fairly substantial changes and given the patch causing the regression doesn't actually fix a bug it seems better to just revert it in stable. CC: stable@vger.kernel.org # 6.12, 6.17 Link: https://lore.kernel.org/linux-sound/20251120-reset-gpios-swnodes-v7-0-a100493a0f4b@linaro.org/ [1] Closes: https://github.com/thesofproject/linux/issues/5599 Closes: https://github.com/thesofproject/linux/issues/5603 Acked-by: Bartosz Golaszewski Signed-off-by: Charles Keepax Signed-off-by: Greg Kroah-Hartman commit 4a4abb0f9660de9f9336e3880249d5ea918cbabb Author: Emil Tsalapatis Date: Thu Oct 16 11:11:26 2025 -0700 sched_ext: fix flag check for deferred callbacks commit a3c4a0a42e61aad1056a3d33fd603c1ae66d4288 upstream. When scheduling the deferred balance callbacks, check SCX_RQ_BAL_CB_PENDING instead of SCX_RQ_BAL_PENDING. This way schedule_deferred() properly tests whether there is already a pending request for queue_balance_callback() to be invoked at the end of .balance(). Fixes: a8ad873113d3 ("sched_ext: defer queue_balance_callback() until after ops.dispatch") Signed-off-by: Emil Tsalapatis Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 18228a70a01a49e34fe599ccacc88a2bca70dce2 Author: Andrea Righi Date: Mon Oct 13 22:36:34 2025 +0200 sched_ext: Fix scx_kick_pseqs corruption on concurrent scheduler loads commit 05e63305c85c88141500f0a2fb02afcfba9396e1 upstream. If we load a BPF scheduler while another scheduler is already running, alloc_kick_pseqs() would be called again, overwriting the previously allocated arrays. Fix by moving the alloc_kick_pseqs() call after the scx_enable_state() check, ensuring that the arrays are only allocated when a scheduler can actually be loaded. Fixes: 14c1da3895a11 ("sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc()") Signed-off-by: Andrea Righi Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit f1ad80fdf97b6ef1d2ae8271cb10eb01c3a561c7 Author: Ankit Nautiyal Date: Thu Jul 10 10:50:41 2025 +0530 drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2 commit 21c586d9233a1f258e8d437466c441d50885d30f upstream. Some ICL/TGL platforms with combo PHY ports suffer from signal integrity issues at HBR3. While certain systems include a Parade PS8461 mux to mitigate this, its presence cannot be reliably detected. Furthermore, broken or missing VBT entries make it unsafe to rely on VBT for enforcing link rate limits. To address this introduce a device specific quirk to cap the eDP link rate to HBR2 (540000 kHz). This will override any higher advertised rates from the sink or DPCD for specific devices. Currently, the quirk is added for Dell XPS 13 7390 2-in-1 which is reported in gitlab issue #5969 [1]. [1] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969 v2: Align the quirk with the intended quirk name and refactor the condition to use min(). (Jani) v3: Use condition `rate > 540000`. Drop extra parentheses. (Ville) Cc: Jani Nikula Cc: Ville Syrjälä Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969 Reviewed-by: Ville Syrjälä Signed-off-by: Ankit Nautiyal Link: https://lore.kernel.org/r/20250710052041.1238567-3-ankit.k.nautiyal@intel.com Signed-off-by: Greg Kroah-Hartman commit a6d47b0415810508d6ef050f7ab96552a7636698 Author: Ankit Nautiyal Date: Thu Jul 10 10:50:40 2025 +0530 Revert "drm/i915/dp: Reject HBR3 when sink doesn't support TPS4" commit 8c9006283e4b767003b2d11182d6e90f8b184c3d upstream. This reverts commit 584cf613c24a4250d9be4819efc841aa2624d5b6. Commit 584cf613c24a ("drm/i915/dp: Reject HBR3 when sink doesn't support TPS4") introduced a blanket rejection of HBR3 link rate when the sink does not support TPS4. While this was intended to address instability observed on certain eDP panels [1], there seem to be edp panels that do not follow the specification. These eDP panels do not advertise TPS4 support, but require HBR3 to operate at their fixed native resolution [2]. As a result, the change causes blank screens on such panels. Apparently, Windows driver does not enforce this restriction, and the issue is not seen there. Therefore, revert the commit to restore functionality for such panels, and align behaviour with Windows driver. [1] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969 [2] https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14517 v2: Update the commit message with better justification. (Ville) Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14517 Acked-by: Jani Nikula Reviewed-by: Ville Syrjälä Signed-off-by: Ankit Nautiyal Link: https://lore.kernel.org/r/20250710052041.1238567-2-ankit.k.nautiyal@intel.com Signed-off-by: Greg Kroah-Hartman commit 5dc95f897d06fcfde6155a8068fa002bda864f38 Author: Jari Ruusu Date: Sat Nov 22 07:28:00 2025 +0000 tty/vt: fix up incorrect backport to stable releases Below is a patch for 6.12.58+ and 6.17.8+ stable branches only. Upstream does not need this. Signed-off-by: Jari Ruusu Fixes: da7e8b382396 ("tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()") Signed-off-by: Greg Kroah-Hartman commit 82120feecc7b8224e3314fa1e989c11d868053bf Author: Fangzhi Zuo Date: Tue Nov 25 08:51:12 2025 -0500 drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched [ Upstream commit cfa0904a35fd0231f4d05da0190f0a22ed881cce ] [why] 1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes, gating DTBCLK causes the DP2 sink to lose its clock source. 2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk, but gates DTBCLK when either pix_clk or ref_dtbclk is zero. pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched, which can lead to DTBCLK being gated by mistake. [how] Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK; this is more accurate. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701 Fixes: 5949e7c4890c ("drm/amd/display: Enable Dynamic DTBCLK Switch") Reviewed-by: Charlene Liu Reviewed-by: Aurabindo Pillai Signed-off-by: Fangzhi Zuo Signed-off-by: Roman Li Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit d04eb0c402780ca037b62a6aecf23b863545ebca) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b3f28536a80e9eb25e1d782d2af24180632c2b6c Author: Charlene Liu Date: Tue Nov 25 08:51:11 2025 -0500 drm/amd/display: Insert dccg log for easy debug [ Upstream commit 35bcc9168f3ce6416cbf3f776758be0937f84cb3 ] [why] Log for sequence tracking Reviewed-by: Ovidiu (Ovi) Bunea Reviewed-by: Yihan Zhu Signed-off-by: Charlene Liu Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher Stable-dep-of: cfa0904a35fd ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f7d953c38245c0e9d8e268fb6a9e524602fb44ec Author: Gang Yan Date: Mon Nov 24 22:58:42 2025 -0500 mptcp: fix address removal logic in mptcp_pm_nl_rm_addr [ Upstream commit 92e239e36d600002559074994a545fcfac9afd2d ] Fix inverted WARN_ON_ONCE condition that prevented normal address removal counter updates. The current code only executes decrement logic when the counter is already 0 (abnormal state), while normal removals (counter > 0) are ignored. Signed-off-by: Gang Yan Fixes: 636113918508 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-10-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski [ Context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 81a8685cac4bf081c93a7df591644f4f80240bb9 Author: Darrick J. Wong Date: Mon Nov 24 12:45:03 2025 -0500 xfs: fix out of bounds memory read error in symlink repair [ Upstream commit 678e1cc2f482e0985a0613ab4a5bf89c497e5acc ] xfs/286 produced this report on my test fleet: ================================================================== BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110 Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184): memcpy_orig+0x54/0x110 xrep_symlink_salvage_inline+0xb3/0xf0 [xfs] xrep_symlink_salvage+0x100/0x110 [xfs] xrep_symlink+0x2e/0x80 [xfs] xrep_attempt+0x61/0x1f0 [xfs] xfs_scrub_metadata+0x34f/0x5c0 [xfs] xfs_ioc_scrubv_metadata+0x387/0x560 [xfs] xfs_file_ioctl+0xe23/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128 allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago): xfs_init_local_fork+0x79/0xe0 [xfs] xfs_iformat_local+0xa4/0x170 [xfs] xfs_iformat_data_fork+0x148/0x180 [xfs] xfs_inode_from_disk+0x2cd/0x480 [xfs] xfs_iget+0x450/0xd60 [xfs] xfs_bulkstat_one_int+0x6b/0x510 [xfs] xfs_bulkstat_iwalk+0x1e/0x30 [xfs] xfs_iwalk_ag_recs+0xdf/0x150 [xfs] xfs_iwalk_run_callbacks+0xb9/0x190 [xfs] xfs_iwalk_ag+0x1dc/0x2f0 [xfs] xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs] xfs_iwalk+0xa4/0xd0 [xfs] xfs_bulkstat+0xfa/0x170 [xfs] xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs] xfs_file_ioctl+0xbf2/0x10e0 [xfs] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x4e/0x1e0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014 ================================================================== On further analysis, I realized that the second parameter to min() is not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data buffer. if_bytes can be smaller than the data fork size because: (a) the forkoff code tries to keep the data area as large as possible (b) for symbolic links, if_bytes is the ondisk file size + 1 (c) forkoff is always a multiple of 8. Case in point: for a single-byte symlink target, forkoff will be 8 but the buffer will only be 2 bytes long. In other words, the logic here is wrong and we walk off the end of the incore buffer. Fix that. Cc: stable@vger.kernel.org # v6.10 Fixes: 2651923d8d8db0 ("xfs: online repair of symbolic links") Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Carlos Maiolino Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fd6f9919efb4c2ba5ff9aa1d97738e08a2275feb Author: Marcelo Moreira Date: Mon Nov 24 12:45:02 2025 -0500 xfs: Replace strncpy with memcpy [ Upstream commit 33ddc796ecbd50cd6211aa9e9eddbf4567038b49 ] The changes modernizes the code by aligning it with current kernel best practices. It improves code clarity and consistency, as strncpy is deprecated as explained in Documentation/process/deprecated.rst. This change does not alter the functionality or introduce any behavioral changes. Suggested-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Carlos Maiolino Signed-off-by: Marcelo Moreira Reviewed-by: Darrick J. Wong Signed-off-by: Carlos Maiolino Stable-dep-of: 678e1cc2f482 ("xfs: fix out of bounds memory read error in symlink repair") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3e1c43f14521c8a0991811346a313535ec3a3c42 Author: Sathishkumar S Date: Fri Nov 21 13:45:22 2025 -0500 drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1 [ Upstream commit bbe3c115030da431c9ec843c18d5583e59482dd2 ] enable parse_cs callback for JPEG5_0_1. Signed-off-by: Sathishkumar S Reviewed-by: Leo Liu Signed-off-by: Alex Deucher (cherry picked from commit 547985579932c1de13f57f8bcf62cd9361b9d3d3) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 641b58475afa27090b03e7daf1b83f6db51f4113 Author: Sathishkumar S Date: Fri Nov 21 13:45:21 2025 -0500 drm/amdgpu/jpeg: Move parse_cs to amdgpu_jpeg.c [ Upstream commit 28f75f9bcc7da7da12e5dae2ae8d8629a2b2e42e ] Rename jpeg_v2_dec_ring_parse_cs to amdgpu_jpeg_dec_parse_cs and move it to amdgpu_jpeg.c as it is shared among jpeg versions. Signed-off-by: Sathishkumar S Reviewed-by: Leo Liu Signed-off-by: Alex Deucher Stable-dep-of: bbe3c115030d ("drm/amdgpu/jpeg: Add parse_cs for JPEG5_0_1") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit adef9314480670a357a694ebb38c6c4f82a84104 Author: Imre Deak Date: Fri Nov 21 10:20:15 2025 -0500 drm/i915/dp_mst: Disable Panel Replay [ Upstream commit f2687d3cc9f905505d7b510c50970176115066a2 ] Disable Panel Replay on MST links until it's properly implemented. For instance the required VSC SDP is not programmed on MST and FEC is not enabled if Panel Replay is enabled. Fixes: 3257e55d3ea7 ("drm/i915/panelreplay: enable/disable panel replay") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15174 Cc: Jouni Högander Cc: Animesh Manna Cc: stable@vger.kernel.org # v6.8+ Reviewed-by: Jouni Högander Signed-off-by: Imre Deak Link: https://patch.msgid.link/20251107124141.911895-1-imre.deak@intel.com (cherry picked from commit e109f644b871df8440c886a69cdce971ed533088) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cd1aa3e40297c783f69c6e44f0d7aafa10fb131f Author: Jouni Högander Date: Fri Nov 21 10:20:14 2025 -0500 drm/i915/psr: Check drm_dp_dpcd_read return value on PSR dpcd init [ Upstream commit 9cc10041e9fe7f32c4817e3cdd806ff1986d266c ] Currently we are ignoriong drm_dp_dpcd_read return values when reading PSR and Panel Replay capability DPCD register. Rework intel_psr_dpcd a bit to take care of checking the return value. v2: use drm_dp_dpcd_read_data Signed-off-by: Jouni Högander Reviewed-by: Jani Nikula Link: https://lore.kernel.org/r/20250821045918.17757-1-jouni.hogander@intel.com Stable-dep-of: f2687d3cc9f9 ("drm/i915/dp_mst: Disable Panel Replay") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit abd29b6e17a918fdd68352ce4813e167acc8727e Author: Henrique Carvalho Date: Wed Nov 26 10:55:53 2025 -0300 smb: client: fix incomplete backport in cfids_invalidation_worker() The previous commit bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()") was an incomplete backport and missed one kref_put() call in cfids_invalidation_worker() that should have been converted to close_cached_dir(). Fixes: bdb596ceb4b7 ("smb: client: fix potential UAF in smb2_close_cached_fid()")" Signed-off-by: Henrique Carvalho Signed-off-by: Greg Kroah-Hartman commit eef72d856f978955e633c270abb1f7ec7b61c6d2 Author: Samuel Zhang Date: Wed Nov 5 03:04:08 2025 +0000 drm/amdgpu: fix gpu page fault after hibernation on PF passthrough [ Upstream commit eb6e7f520d6efa4d4ebf1671455abe4a681f7a05 ] On PF passthrough environment, after hibernate and then resume, coralgemm will cause gpu page fault. Mode1 reset happens during hibernate, but partition mode is not restored on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right after resume. When CP access the MQD BO, wrong stride size is used, this will cause out of bound access on the MQD BO, resulting page fault. The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called when resume from a hibernation. KFD resume is called separately during a reset recovery or resume from suspend sequence. Hence it's not required to be called as part of partition switch. Signed-off-by: Samuel Zhang Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher (cherry picked from commit 5d1b32cfe4a676fe552416cb5ae847b215463a1a) Signed-off-by: Sasha Levin commit 7c2a888605b553ae8ef8b2d6e0c985b02543a3ef Author: Filipe Manana Date: Fri Oct 24 12:30:56 2025 +0100 btrfs: set inode flag BTRFS_INODE_COPY_EVERYTHING when logging new name [ Upstream commit 953902e4fb4c373c81a977f78e40f9f93a79e20f ] If we are logging a new name make sure our inode has the runtime flag BTRFS_INODE_COPY_EVERYTHING set so that at btrfs_log_inode() we will find new inode refs/extrefs in the subvolume tree and copy them into the log tree. We are currently doing it when adding a new link but we are missing it when renaming. An example where this makes a new name not persisted: 1) create symlink with name foo in directory A 2) fsync directory A, which persists the symlink 3) rename the symlink from foo to bar 4) fsync directory A to persist the new symlink name Step 4 isn't working correctly as it's not logging the new name and also leaving the old inode ref in the log tree, so after a power failure the symlink still has the old name of "foo". This is because when we first fsync directoy A we log the symlink's inode (as it's a new entry) and at btrfs_log_inode() we set the log mode to LOG_INODE_ALL and then because we are using that mode and the inode has the runtime flag BTRFS_INODE_NEEDS_FULL_SYNC set, we clear that flag as well as the flag BTRFS_INODE_COPY_EVERYTHING. That means the next time we log the inode, during the rename through the call to btrfs_log_new_name() (calling btrfs_log_inode_parent() and then btrfs_log_inode()), we will not search the subvolume tree for new refs/extrefs and jump directory to the 'log_extents' label. Fix this by making sure we set BTRFS_INODE_COPY_EVERYTHING on an inode when we are about to log a new name. A test case for fstests will follow soon. Reported-by: Vyacheslav Kovalevsky Link: https://lore.kernel.org/linux-btrfs/ac949c74-90c2-4b9a-b7fd-1ffc5c3175c7@gmail.com/ Reviewed-by: Boris Burkov Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 31eb7a8cec4c641e7718394a4d658f491c9e7177 Author: Zhang Chujun Date: Thu Nov 6 11:10:40 2025 +0800 tracing/tools: Fix incorrcet short option in usage text for --threads [ Upstream commit 53afec2c8fb2a562222948cb1c2aac48598578c9 ] The help message incorrectly listed '-t' as the short option for --threads, but the actual getopt_long configuration uses '-e'. This mismatch can confuse users and lead to incorrect command-line usage. This patch updates the usage string to correctly show: "-e, --threads NRTHR" to match the implementation. Note: checkpatch.pl reports a false-positive spelling warning on 'Run', which is intentional. Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com Signed-off-by: Zhang Chujun Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit f9608637ecc165d7d6341df105aee44691461fb9 Author: Nishanth Menon Date: Mon Nov 3 10:28:11 2025 -0600 net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error [ Upstream commit 90a88306eb874fe4bbdd860e6c9787f5bbc588b5 ] Make knav_dma_open_channel consistently return NULL on error instead of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h returns NULL when the driver is disabled, but the driver implementation does not even return NULL or ERR_PTR on failure, causing inconsistency in the users. This results in a crash in netcp_free_navigator_resources as followed (trimmed): Unhandled fault: alignment exception (0x221) at 0xfffffff2 [fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000 Internal error: : 221 [#1] SMP ARM Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE Hardware name: Keystone PC is at knav_dma_close_channel+0x30/0x19c LR is at netcp_free_navigator_resources+0x2c/0x28c [... TRIM...] Call trace: knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c netcp_ndo_open from __dev_open+0x114/0x29c __dev_open from __dev_change_flags+0x190/0x208 __dev_change_flags from netif_change_flags+0x1c/0x58 netif_change_flags from dev_change_flags+0x38/0xa0 dev_change_flags from ip_auto_config+0x2c4/0x11f0 ip_auto_config from do_one_initcall+0x58/0x200 do_one_initcall from kernel_init_freeable+0x1cc/0x238 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x38 [... TRIM...] Standardize the error handling by making the function return NULL on all error conditions. The API is used in just the netcp_core.c so the impact is limited. Note, this change, in effect reverts commit 5b6cb43b4d62 ("net: ethernet: ti: netcp_core: return error while dma channel open issue"), but provides a less error prone implementation. Suggested-by: Simon Horman Suggested-by: Jacob Keller Signed-off-by: Nishanth Menon Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b712f234a74c1f5ce70b5d7aec3fc2499c258141 Author: Nitin Rawat Date: Sun Oct 12 23:08:28 2025 +0530 scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3) [ Upstream commit 5127be409c6c3815c4a7d8f6d88043e44f9b9543 ] According to UFS specifications, the power-off sequence for a UFS device includes: - Sending an SSU command with Power_Condition=3 and await a response. - Asserting RST_N low. - Turning off REF_CLK. - Turning off VCC. - Turning off VCCQ/VCCQ2. As part of ufs shutdown, after the SSU command completion, asserting hardware reset (HWRST) triggers the device firmware to wake up and execute its reset routine. This routine initializes hardware blocks and takes a few milliseconds to complete. During this time, the ICCQ draws a large current. This large ICCQ current may cause issues for the regulator which is supplying power to UFS, because the turn off request from UFS driver to the regulator framework will be immediately followed by low power mode(LPM) request by regulator framework. This is done by framework because UFS which is the only client is requesting for disable. So if the rail is still in the process of shutting down while ICCQ exceeds LPM current thresholds, and LPM mode is activated in hardware during this state, it may trigger an overcurrent protection (OCP) fault in the regulator. To prevent this, a 10ms delay is added after asserting HWRST. This allows the reset operation to complete while power rails remain active and in high-power mode. Currently there is no way for Host to query whether the reset is completed or not and hence this the delay is based on experiments with Qualcomm UFS controllers across multiple UFS vendors. Signed-off-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20251012173828.9880-1-nitin.rawat@oss.qualcomm.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit fdc4d949db22ba6c585b73f180f2517f9399c8a0 Author: René Rebe Date: Tue Nov 25 15:41:49 2025 +0100 ALSA: usb-audio: fix uac2 clock source at terminal parser [ Upstream commit d26e9f669cc0a6a85cf17180c09a6686db9f4002 ] Since 8b3a087f7f65 ("ALSA: usb-audio: Unify virtual type units type to UAC3 values") usb-audio is using UAC3_CLOCK_SOURCE instead of bDescriptorSubtype, later refactored with e0ccdef9265 ("ALSA: usb-audio: Clean up check_input_term()") into parse_term_uac2_clock_source(). This breaks the clock source selection for at least my 1397:0003 BEHRINGER International GmbH FCA610 Pro. Fix by using UAC2_CLOCK_SOURCE in parse_term_uac2_clock_source(). Fixes: 8b3a087f7f65 ("ALSA: usb-audio: Unify virtual type units type to UAC3 values") Signed-off-by: René Rebe Link: https://patch.msgid.link/20251125.154149.1121389544970412061.rene@exactco.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 4a6f3dff466c80a258c26ff6f85670d38ef12d0e Author: Shuicheng Lin Date: Mon Nov 24 22:16:10 2025 +0000 drm/xe: Prevent BIT() overflow when handling invalid prefetch region [ Upstream commit d52dea485cd3c98cfeeb474cf66cf95df2ab142f ] If user provides a large value (such as 0x80) for parameter prefetch_mem_region_instance in vm_bind ioctl, it will cause BIT(prefetch_region) overflow as below: " ------------[ cut here ]------------ UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7 shift exponent 128 is too large for 64-bit type 'long unsigned int' CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary) Tainted: [W]=WARN Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 Call Trace: dump_stack_lvl+0xa0/0xc0 dump_stack+0x10/0x20 ubsan_epilogue+0x9/0x40 __ubsan_handle_shift_out_of_bounds+0x10e/0x170 ? mutex_unlock+0x12/0x20 xe_vm_bind_ioctl.cold+0x20/0x3c [xe] ... " Fix it by validating prefetch_region before the BIT() usage. v2: Add Closes and Cc stable kernels. (Matt) Reported-by: Koen Koning Reported-by: Peter Senna Tschudin Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478 Cc: # v6.8+ Reviewed-by: Matthew Auld Signed-off-by: Shuicheng Lin Signed-off-by: Matthew Auld Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com (cherry picked from commit 8f565bdd14eec5611cc041dba4650e42ccdf71d9) Signed-off-by: Lucas De Marchi (cherry picked from commit d52dea485cd3c98cfeeb474cf66cf95df2ab142f) Signed-off-by: Shuicheng Lin Signed-off-by: Sasha Levin commit 7f04be008810e42750decfcd475dd3c2204997df Author: Jakub Horký Date: Tue Oct 14 16:44:06 2025 +0200 kconfig/nconf: Initialize the default locale at startup [ Upstream commit 43c2931a95e6b295bfe9e3b90dbe0f7596933e91 ] Fix bug where make nconfig doesn't initialize the default locale, which causes ncurses menu borders to be displayed incorrectly (lqqqqk) in UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY. Signed-off-by: Jakub Horký Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net [nathan: Alphabetize locale.h include] Signed-off-by: Nathan Chancellor Signed-off-by: Sasha Levin commit 37fc080dec2f5f8d262cab341ae45ffa5b7f705f Author: Jakub Horký Date: Tue Oct 14 17:49:32 2025 +0200 kconfig/mconf: Initialize the default locale at startup [ Upstream commit 3927c4a1084c48ef97f11281a0a43ecb2cb4d6f1 ] Fix bug where make menuconfig doesn't initialize the default locale, which causes ncurses menu borders to be displayed incorrectly (lqqqqk) in UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY. Signed-off-by: Jakub Horký Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net [nathan: Alphabetize locale.h include] Signed-off-by: Nathan Chancellor Signed-off-by: Sasha Levin commit 89f5f760dcf709ff2961e205c96f6c47f783a2c3 Author: Borislav Petkov (AMD) Date: Wed Oct 29 12:34:31 2025 +0100 x86/CPU/AMD: Extend Zen6 model range [ Upstream commit 847ebc4476714f81d7dea73e5ea69448d7fe9d3a ] Add some more Zen6 models. Signed-off-by: Borislav Petkov (AMD) Signed-off-by: Ingo Molnar Link: https://patch.msgid.link/20251029123056.19987-1-bp@kernel.org Signed-off-by: Sasha Levin commit 2df89d7976190369fa505ab5a579bb58e1754619 Author: Shahar Shitrit Date: Sun Oct 26 22:03:02 2025 +0200 net: tls: Cancel RX async resync request on rcd_delta overflow [ Upstream commit c15d5c62ab313c19121f10e25d4fec852bd1c40c ] When a netdev issues a RX async resync request for a TLS connection, the TLS module handles it by logging record headers and attempting to match them to the tcp_sn provided by the device. If a match is found, the TLS module approves the tcp_sn for resynchronization. While waiting for a device response, the TLS module also increments rcd_delta each time a new TLS record is received, tracking the distance from the original resync request. However, if the device response is delayed or fails (e.g due to unstable connection and device getting out of tracking, hardware errors, resource exhaustion etc.), the TLS module keeps logging and incrementing, which can lead to a WARN() when rcd_delta exceeds the threshold. To address this, introduce tls_offload_rx_resync_async_request_cancel() to explicitly cancel resync requests when a device response failure is detected. Call this helper also as a final safeguard when rcd_delta crosses its threshold, as reaching this point implies that earlier cancellation did not occur. Signed-off-by: Shahar Shitrit Reviewed-by: Sabrina Dubroca Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ede502101fc5da22264648e7c74bc338b72e7a53 Author: Carlos Llamas Date: Thu Oct 30 04:39:18 2025 +0000 blk-crypto: use BLK_STS_INVAL for alignment errors [ Upstream commit 0b39ca457241aeca07a613002512573e8804f93a ] Make __blk_crypto_bio_prep() propagate BLK_STS_INVAL when IO segments fail the data unit alignment check. This was flagged by an LTP test that expects EINVAL when performing an O_DIRECT read with a misaligned buffer [1]. Cc: Eric Biggers Cc: Christoph Hellwig Link: https://lore.kernel.org/all/aP-c5gPjrpsn0vJA@google.com/ [1] Signed-off-by: Carlos Llamas Reviewed-by: Eric Biggers Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 732a71a923a998e30585ca84a84bb4d18494d430 Author: Shahar Shitrit Date: Sun Oct 26 22:03:01 2025 +0200 net: tls: Change async resync helpers argument [ Upstream commit 34892cfec0c2d96787c4be7bda0d5f18d7dacf85 ] Update tls_offload_rx_resync_async_request_start() and tls_offload_rx_resync_async_request_end() to get a struct tls_offload_resync_async parameter directly, rather than extracting it from struct sock. This change aligns the function signatures with the upcoming tls_offload_rx_resync_async_request_cancel() helper, which will be introduced in a subsequent patch. Signed-off-by: Shahar Shitrit Reviewed-by: Sabrina Dubroca Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit baeb52ced73180d07112086d7eca395fa8b68c28 Author: Po-Hsu Lin Date: Mon Oct 27 17:57:10 2025 +0800 selftests: net: use BASH for bareudp testing [ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ] In bareudp.sh, this script uses /bin/sh and it will load another lib.sh BASH script at the very beginning. But on some operating systems like Ubuntu, /bin/sh is actually pointed to DASH, thus it will try to run BASH commands with DASH and consequently leads to syntax issues: # ./bareudp.sh: 4: ./lib.sh: Bad substitution # ./bareudp.sh: 5: ./lib.sh: source: not found # ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected Fix this by explicitly using BASH for bareudp.sh. This fixes test execution failures on systems where /bin/sh is not BASH. Reported-by: Edoardo Canepa Link: https://bugs.launchpad.net/bugs/2129812 Signed-off-by: Po-Hsu Lin Reviewed-by: Przemek Kitszel Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7a6df899c2310d0b52fd5fc10759562e9a96f1a9 Author: Paulo Alcantara Date: Thu Oct 23 18:59:47 2025 -0300 smb: client: handle lack of IPC in dfs_cache_refresh() [ Upstream commit fac56c4651ae95f3f2b468c2cf1884cf0e6d18c1 ] In very rare cases, DFS mounts could end up with SMB sessions without any IPC connections. These mounts are only possible when having unexpired cached DFS referrals, hence not requiring any IPC connections during the mount process. Try to establish those missing IPC connections when refreshing DFS referrals. If the server is still rejecting it, then simply ignore and leave expired cached DFS referral for any potential DFS failovers. Reported-by: Jay Shin Signed-off-by: Paulo Alcantara (Red Hat) Cc: David Howells Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 9fc7721ed0fce612921237a89c6e83b9a20b8e73 Author: Sidharth Seela Date: Mon Sep 29 17:24:06 2025 +0530 selftests: cachestat: Fix warning on declaration under label [ Upstream commit 920aa3a7705a061cb3004572d8b7932b54463dbf ] Fix warning caused from declaration under a case label. The proper way is to declare variable at the beginning of the function. The warning came from running clang using LLVM=1; and is as follows: -test_cachestat.c:260:3: warning: label followed by a declaration is a C23 extension [-Wc23-extensions] 260 | char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE, | Link: https://lore.kernel.org/r/20250929115405.25695-2-sidharthseela@gmail.com Signed-off-by: Sidharth Seela Reviewed-by: SeongJae Park Reviewed-by: wang lian Reviewed-by: Dev Jain Acked-by: Shuah Khan Acked-by: Nhat Pham Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 7b719a57ad0ee2bbf2a5bb623590d43631836619 Author: Borislav Petkov (AMD) Date: Thu Oct 23 14:46:29 2025 +0200 x86/microcode/AMD: Limit Entrysign signature checking to known generations [ Upstream commit 8a9fb5129e8e64d24543ebc70de941a2d77a9e77 ] Limit Entrysign sha256 signature checking to CPUs in the range Zen1-Zen5. X86_BUG cannot be used here because the loading on the BSP happens way too early, before the cpufeatures machinery has been set up. Signed-off-by: Borislav Petkov (AMD) Link: https://patch.msgid.link/all/20251023124629.5385-1-bp@kernel.org Signed-off-by: Sasha Levin commit 560292ae3e76b0b4ce0472f1a5076d61f37463aa Author: dongsheng Date: Mon Sep 8 14:16:39 2025 +0800 perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake [ Upstream commit f4c12e5cefc8ec2eda93bc17ea734407228449ab ] WildcatLake (WCL) is a variant of PantherLake (PTL) and shares the same uncore PMU features with PTL. Therefore, directly reuse Pantherlake's uncore PMU enabling code for WildcatLake. Signed-off-by: dongsheng Signed-off-by: Dapeng Mi Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/20250908061639.938105-2-dapeng1.mi@linux.intel.com Signed-off-by: Sasha Levin commit d765389faa2974c89fc7a0cb4cee1b67c0fd37ae Author: Eren Demir Date: Mon Oct 27 13:58:10 2025 +0300 ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D) [ Upstream commit 28935ee5e4789ad86c08ba9f2426edd6203d13fa ] The quirk for Victus 15-fa1xxx wasn't working on Victus 15-fa1031nt due to a different board id. This patch enables the existing quirk for the board id 8BC8. Tested on HP Victus 15-fa1031nt (MB 8C2D). The LED behaviour works as intended. Signed-off-by: Eren Demir Link: https://patch.msgid.link/20251027110208.6481-1-eren.demir2479090@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit e208fb1660c4a43f06b7b66c3ff22dde84ec3990 Author: Bart Van Assche Date: Tue Oct 7 14:48:00 2025 -0700 scsi: core: Fix a regression triggered by scsi_host_busy() [ Upstream commit a0b7780602b1b196f47e527fec82166a7e67c4d0 ] Commit 995412e23bb2 ("blk-mq: Replace tags->lock with SRCU for tag iterators") introduced the following regression: Call trace: __srcu_read_lock+0x30/0x80 (P) blk_mq_tagset_busy_iter+0x44/0x300 scsi_host_busy+0x38/0x70 ufshcd_print_host_state+0x34/0x1bc ufshcd_link_startup.constprop.0+0xe4/0x2e0 ufshcd_init+0x944/0xf80 ufshcd_pltfrm_init+0x504/0x820 ufs_rockchip_probe+0x2c/0x88 platform_probe+0x5c/0xa4 really_probe+0xc0/0x38c __driver_probe_device+0x7c/0x150 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1e0 bus_for_each_dev+0x7c/0xdc driver_attach+0x24/0x30 bus_add_driver+0x110/0x230 driver_register+0x68/0x130 __platform_driver_register+0x20/0x2c ufs_rockchip_pltform_init+0x1c/0x28 do_one_initcall+0x60/0x1e0 kernel_init_freeable+0x248/0x2c4 kernel_init+0x20/0x140 ret_from_fork+0x10/0x20 Fix this regression by making scsi_host_busy() check whether the SCSI host tag set has already been initialized. tag_set->ops is set by scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This fix is based on the assumption that scsi_host_busy() and scsi_mq_setup_tags() calls are serialized. This is the case in the UFS driver. Reported-by: Sebastian Reichel Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/ Cc: Ming Lei Cc: Jens Axboe Signed-off-by: Bart Van Assche Reviewed-by: Ming Lei Tested-by: Sebastian Reichel Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit d953e53c9315fcee5842a066fb35c2ec1d42bd93 Author: Steve French Date: Fri Oct 24 21:17:01 2025 -0500 cifs: fix typo in enable_gcm_256 module parameter [ Upstream commit f765fdfcd8b5bce92c6aa1a517ff549529ddf590 ] Fix typo in description of enable_gcm_256 module parameter Suggested-by: Thomas Spear Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 7263caac01826a94074b78d295c8edb1bec9ea6f Author: Shuming Fan Date: Mon Oct 27 18:33:33 2025 +0800 ASoC: rt721: fix prepare clock stop failed [ Upstream commit d914ec6f07548f7c13a231a4f526e043e736e82e ] This patch adds settings to prevent the 'prepare clock stop failed' error. Signed-off-by: Shuming Fan Link: https://patch.msgid.link/20251027103333.38353-1-shumingf@realtek.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b865da18b6cb878f33b5920693d03f23b9c4d1a3 Author: Rob Clark Date: Mon Oct 6 08:35:41 2025 -0700 drm/msm: Fix pgtable prealloc error path [ Upstream commit 830d68f2cb8ab6fb798bb9555016709a9e012af0 ] The following splat was reported: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008d0fd8000 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 5 UID: 1000 PID: 149076 Comm: Xwayland Tainted: G S 6.16.0-rc2-00809-g0b6974bb4134-dirty #367 PREEMPT Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Qualcomm Technologies, Inc. SM8650 HDK (DT) pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : build_detached_freelist+0x28/0x224 lr : kmem_cache_free_bulk.part.0+0x38/0x244 sp : ffff000a508c7a20 x29: ffff000a508c7a20 x28: ffff000a508c7d50 x27: ffffc4e49d16f350 x26: 0000000000000058 x25: 00000000fffffffc x24: 0000000000000000 x23: ffff00098c4e1450 x22: 00000000fffffffc x21: 0000000000000000 x20: ffff000a508c7af8 x19: 0000000000000002 x18: 00000000000003e8 x17: ffff000809523850 x16: ffff000809523820 x15: 0000000000401640 x14: ffff000809371140 x13: 0000000000000130 x12: ffff0008b5711e30 x11: 00000000001058fa x10: 0000000000000a80 x9 : ffff000a508c7940 x8 : ffff000809371ba0 x7 : 781fffe033087fff x6 : 0000000000000000 x5 : ffff0008003cd000 x4 : 781fffe033083fff x3 : ffff000a508c7af8 x2 : fffffdffc0000000 x1 : 0001000000000000 x0 : ffff0008001a6a00 Call trace: build_detached_freelist+0x28/0x224 (P) kmem_cache_free_bulk.part.0+0x38/0x244 kmem_cache_free_bulk+0x10/0x1c msm_iommu_pagetable_prealloc_cleanup+0x3c/0xd0 msm_vma_job_free+0x30/0x240 msm_ioctl_vm_bind+0x1d0/0x9a0 drm_ioctl_kernel+0x84/0x104 drm_ioctl+0x358/0x4d4 __arm64_sys_ioctl+0x8c/0xe0 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x3c/0xe0 do_el0_svc+0x18/0x20 el0_svc+0x30/0x100 el0t_64_sync_handler+0x104/0x130 el0t_64_sync+0x170/0x174 Code: aa0203f5 b26287e2 f2dfbfe2 aa0303f4 (f8737ab6) ---[ end trace 0000000000000000 ]--- Since msm_vma_job_free() is called directly from the ioctl, this looks like an error path cleanup issue. Which I think results from prealloc_cleanup() called without a preceding successful prealloc_allocate() call. So handle that case better. Reported-by: Connor Abbott Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/678677/ Message-ID: <20251006153542.419998-1-robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin commit f39659da573a8df319d428d5e26e5da7b2b62f46 Author: Emil Tsalapatis Date: Fri Oct 10 12:12:50 2025 -0700 sched_ext: defer queue_balance_callback() until after ops.dispatch [ Upstream commit a8ad873113d3fe01f9b5d737d4b0570fa36826b0 ] The sched_ext code calls queue_balance_callback() during enqueue_task() to defer operations that drop multiple locks until we can unpin them. The call assumes that the rq lock is held until the callbacks are invoked, and the pending callbacks will not be visible to any other threads. This is enforced by a WARN_ON_ONCE() in rq_pin_lock(). However, balance_one() may actually drop the lock during a BPF dispatch call. Another thread may win the race to get the rq lock and see the pending callback. To avoid this, sched_ext must only queue the callback after the dispatch calls have completed. CPU 0 CPU 1 CPU 2 scx_balance() rq_unpin_lock() scx_balance_one() |= IN_BALANCE scx_enqueue() ops.dispatch() rq_unlock() rq_lock() queue_balance_callback() rq_unlock() [WARN] rq_pin_lock() rq_lock() &= ~IN_BALANCE rq_repin_lock() Changelog v2-> v1 (https://lore.kernel.org/sched-ext/aOgOxtHCeyRT_7jn@gpd4) - Fixed explanation in patch description (Andrea) - Fixed scx_rq mask state updates (Andrea) - Added Reviewed-by tag from Andrea Reported-by: Jakub Kicinski Signed-off-by: Emil Tsalapatis (Meta) Reviewed-by: Andrea Righi Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 047d8f4b620d1d5a84fdb15ed4342bef87a291c6 Author: Rafał Miłecki Date: Fri Oct 3 14:51:26 2025 +0200 bcma: don't register devices disabled in OF [ Upstream commit a2a69add80411dd295c9088c1bcf925b1f4e53d7 ] Some bus devices can be marked as disabled for specific SoCs or models. Those should not be registered to avoid probing them. Signed-off-by: Rafał Miłecki Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251003125126.27950-1-zajec5@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 15e2041a97ed58a0d156a36a29ec3b0a8a8db9b9 Author: Tejun Heo Date: Wed Oct 8 13:43:26 2025 -1000 sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc() [ Upstream commit 14c1da3895a116f4e32c20487046655f26d3999b ] On systems with >4096 CPUs, scx_kick_cpus_pnt_seqs allocation fails during boot because it exceeds the 32,768 byte percpu allocator limit. Restructure to use DEFINE_PER_CPU() for the per-CPU pointers, with each CPU pointing to its own kvzalloc'd array. Move allocation from boot time to scx_enable() and free in scx_disable(), so the O(nr_cpu_ids^2) memory is only consumed when sched_ext is active. Use RCU to guard against racing with free. Arrays are freed via call_rcu() and kick_cpus_irq_workfn() uses rcu_dereference_bh() with a NULL check. While at it, rename to scx_kick_pseqs for brevity and update comments to clarify these are pick_task sequence numbers. v2: RCU protect scx_kick_seqs to manage kick_cpus_irq_workfn() racing against disable as per Andrea. v3: Fix bugs notcied by Andrea. Reported-by: Phil Auld Link: http://lkml.kernel.org/r/20251007133523.GA93086@pauld.westford.csb Cc: Andrea Righi Reviewed-by: Emil Tsalapatis Reviewed-by: Phil Auld Reviewed-by: Andrea Righi Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 68b09d5111da972dedc09601c55e2ff8147be6ad Author: J-Donald Tournier Date: Sat Oct 18 15:52:26 2025 +0100 ALSA: hda/realtek: Add quirk for Lenovo Yoga 7 2-in-1 14AKP10 [ Upstream commit 1386d16761c0b569efedb998f56c1ae048a086e2 ] This laptop requires the same quirk as Lenovo Yoga9 14IAP7 for fixing the bass speaker problems. Use HDA_CODEC_QUIRK to match on the codec SSID to avoid conflict with the Lenovo Legion Slim 7 16IRH8, which has the same PCI SSID. Signed-off-by: J-Donald Tournier Link: https://patch.msgid.link/20251018145322.39119-1-jdournier@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 4386c200711b3f2668de91fc9f62df059882a713 Author: Thomas Bogendoerfer Date: Thu Nov 20 13:10:29 2025 +0100 MIPS: kernel: Fix random segmentation faults [ Upstream commit 14b46ba92bf547508b4a49370c99aba76cb53b53 ] Commit 69896119dc9d ("MIPS: vdso: Switch to generic storage implementation") switches to a generic vdso storage, which increases the number of data pages from 1 to 4. But there is only one page reserved, which causes segementation faults depending where the VDSO area is randomized to. To fix this use the same size of reservation and allocation of the VDSO data pages. Fixes: 69896119dc9d ("MIPS: vdso: Switch to generic storage implementation") Reviewed-by: Thomas Weißschuh Reviewed-by: Huacai Chen Reviewed-by: Thomas Gleixner Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 0bd5502efdab2ca4d41c3dff9460fedc93c11d20 Author: Malaya Kumar Rout Date: Thu Nov 20 20:32:13 2025 +0530 timekeeping: Fix resource leak in tk_aux_sysfs_init() error paths [ Upstream commit 7b5ab04f035f829ed6008e4685501ec00b3e73c9 ] tk_aux_sysfs_init() returns immediately on error during the auxiliary clock initialization loop without cleaning up previously allocated kobjects and sysfs groups. If kobject_create_and_add() or sysfs_create_group() fails during loop iteration, the parent kobjects (tko and auxo) and any previously created child kobjects are leaked. Fix this by adding proper error handling with goto labels to ensure all allocated resources are cleaned up on failure. kobject_put() on the parent kobjects will handle cleanup of their children. Fixes: 7b95663a3d96 ("timekeeping: Provide interface to control auxiliary clocks") Signed-off-by: Malaya Kumar Rout Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20251120150213.246777-1-mrout@redhat.com Signed-off-by: Sasha Levin commit ab6b19f690d89ae4709fba73a3c4a7911f495b7a Author: Michal Luczaj Date: Wed Nov 19 15:02:59 2025 +0100 vsock: Ignore signal/timeout on connect() if already established [ Upstream commit 002541ef650b742a198e4be363881439bb9d86b4 ] During connect(), acting on a signal/timeout by disconnecting an already established socket leads to several issues: 1. connect() invoking vsock_transport_cancel_pkt() -> virtio_transport_purge_skbs() may race with sendmsg() invoking virtio_transport_get_credit(). This results in a permanently elevated `vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling. 2. connect() resetting a connected socket's state may race with socket being placed in a sockmap. A disconnected socket remaining in a sockmap breaks sockmap's assumptions. And gives rise to WARNs. 3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a transport change/drop after TCP_ESTABLISHED. Which poses a problem for any simultaneous sendmsg() or connect() and may result in a use-after-free/null-ptr-deref. Do not disconnect socket on signal/timeout. Keep the logic for unconnected sockets: they don't linger, can't be placed in a sockmap, are rejected by sendmsg(). [1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/ [2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/ [3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/ Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Michal Luczaj Reviewed-by: Stefano Garzarella Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 66c3a3ea465fbf79ca183a1706bbcbb6c15f03e7 Author: Dapeng Mi Date: Wed Nov 12 16:05:26 2025 +0800 perf: Fix 0 count issue of cpu-clock [ Upstream commit f1f96511b1c4c33e53f05909dd267878e0643a9a ] Currently cpu-clock event always returns 0 count, e.g., perf stat -e cpu-clock -- sleep 1 Performance counter stats for 'sleep 1': 0 cpu-clock # 0.000 CPUs utilized 1.002308394 seconds time elapsed The root cause is the commit 'bc4394e5e79c ("perf: Fix the throttle error of some clock events")' adds PERF_EF_UPDATE flag check before calling cpu_clock_event_update() to update the count, however the PERF_EF_UPDATE flag is never set when the cpu-clock event is stopped in counting mode (pmu->dev() -> cpu_clock_event_del() -> cpu_clock_event_stop()). This leads to the cpu-clock event count is never updated. To fix this issue, force to set PERF_EF_UPDATE flag for cpu-clock event just like what task-clock does. Fixes: bc4394e5e79c ("perf: Fix the throttle error of some clock events") Signed-off-by: Dapeng Mi Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Ian Rogers Acked-by: Namhyung Kim Link: https://patch.msgid.link/20251112080526.3971392-1-dapeng1.mi@linux.intel.com Signed-off-by: Sasha Levin commit 37010021d7e0341bb241ca00bcbae31f2c50b23f Author: Shaurya Rane Date: Tue Nov 18 20:32:57 2025 +0530 cifs: fix memory leak in smb3_fs_context_parse_param error path [ Upstream commit 7e4d9120cfa413dd34f4f434befc5dbe6c38b2e5 ] Add proper cleanup of ctx->source and fc->source to the cifs_parse_mount_err error handler. This ensures that memory allocated for the source strings is correctly freed on all error paths, matching the cleanup already performed in the success path by smb3_cleanup_fs_context_contents(). Pointers are also set to NULL after freeing to prevent potential double-free issues. This change fixes a memory leak originally detected by syzbot. The leak occurred when processing Opt_source mount options if an error happened after ctx->source and fc->source were successfully allocated but before the function completed. The specific leak sequence was: 1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory 2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory 3. A subsequent error jumps to cifs_parse_mount_err 4. The old error handler freed passwords but not the source strings, causing the memory to leak. This issue was not addressed by commit e8c73eb7db0a ("cifs: client: fix memory leak in smb3_fs_context_parse_param"), which only fixed leaks from repeated fsconfig() calls but not this error path. Patch updated with minor change suggested by kernel test robot Reported-by: syzbot+87be6809ed9bf6d718e3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=87be6809ed9bf6d718e3 Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Reviewed-by: David Howells Signed-off-by: Shaurya Rane Signed-off-by: Steve French Signed-off-by: Sasha Levin commit b942b5b2693aba9b99922b0929777c431d410093 Author: Thomas Weißschuh Date: Thu Nov 20 14:42:05 2025 +0800 LoongArch: Use UAPI types in ptrace UAPI header [ Upstream commit 20d7338f2d3bcb570068dd6d39b16f1a909fe976 ] The kernel UAPI headers already contain fixed-width integer types, there is no need to rely on the libc types. There may not be a libc available or the libc may not provides the , like for example on nolibc. This also aligns the header with the rest of the LoongArch UAPI headers. Fixes: 803b0fc5c3f2 ("LoongArch: Add process management") Signed-off-by: Thomas Weißschuh Signed-off-by: Huacai Chen Signed-off-by: Sasha Levin commit 67e44bba51dfbc2b12fe9f38bcfed55528869da0 Author: Wen Yang Date: Thu Nov 20 01:45:25 2025 +0800 tick/sched: Fix bogus condition in report_idle_softirq() [ Upstream commit 807e0d187da4c0b22036b5e34000f7a8c52f6e50 ] In commit 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the new function report_idle_softirq() was created by breaking code out of the existing can_stop_idle_tick() for kernels v5.18 and newer. In doing so, the code essentially went from this form: if (A) { static int ratelimit; if (ratelimit < 10 && !C && A&D) { pr_warn("NOHZ tick-stop error: ..."); ratelimit++; } return false; } to a new function: static bool report_idle_softirq(void) { static int ratelimit; if (likely(!A)) return false; if (ratelimit < 10) return false; ... pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n", pending); ratelimit++; return true; } commit a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition") realized ratelimit was essentially set to zero instead of ten, and hence *no* softirq pending messages would ever be issued, but "fixed" it as: - if (ratelimit < 10) + if (ratelimit >= 10) return false; However, this fix introduced another issue: When ratelimit is greater than or equal 10, even if A is true, it will directly return false. While ratelimit in the original code was only used to control printing and will not affect the return value. Restore the original logic and restrict ratelimit to control the printk and not the return value. Fixes: 0345691b24c0 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") Fixes: a7e282c77785 ("tick/rcu: Fix bogus ratelimit condition") Signed-off-by: Wen Yang Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20251119174525.29470-1-wen.yang@linux.dev Signed-off-by: Sasha Levin commit d9fa287f92eb7f1d86205faeac5e5ec73865c641 Author: Wei Fang Date: Mon Nov 17 18:29:43 2025 +0800 net: phylink: add missing supported link modes for the fixed-link [ Upstream commit e31a11be41cd134f245c01d1329e7bc89aba78fb ] Pause, Asym_Pause and Autoneg bits are not set when pl->supported is initialized, so these link modes will not work for the fixed-link. This leads to a TCP performance degradation issue observed on the i.MX943 platform. The switch CPU port of i.MX943 is connected to an ENETC MAC, this link is a fixed link and the link speed is 2.5Gbps. And one of the switch user ports is the RGMII interface, and its link speed is 1Gbps. If the flow-control of the fixed link is not enabled, we can easily observe the iperf performance of TCP packets is very low. Because the inbound rate on the CPU port is greater than the outbound rate on the user port, the switch is prone to congestion, leading to the loss of some TCP packets and requiring multiple retransmissions. Solving this problem should be as simple as setting the Asym_Pause and Pause bits. The reason why the Autoneg bit needs to be set, Russell has gave a very good explanation in the thread [1], see below. "As the advertising and lp_advertising bitmasks have to be non-empty, and the swphy reports aneg capable, aneg complete, and AN enabled, then for consistency with that state, Autoneg should be set. This is how it was prior to the blamed commit." Fixes: de7d3f87be3c ("net: phylink: Use phy_caps_lookup for fixed-link configuration") Link: https://lore.kernel.org/aRjqLN8eQDIQfBjS@shell.armlinux.org.uk # [1] Signed-off-by: Wei Fang Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20251117102943.1862680-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit dccc6daa8afa0f64c432e4c867f275747e3415e1 Author: Bartosz Golaszewski Date: Mon Nov 17 16:08:42 2025 +0100 gpio: cdev: make sure the cdev fd is still active before emitting events [ Upstream commit d4cd0902c156b2ca60fdda8cd8b5bcb4b0e9ed64 ] With the final call to fput() on a file descriptor, the release action may be deferred and scheduled on a work queue. The reference count of that descriptor is still zero and it must not be used. It's possible that a GPIO change, we want to notify the user-space about, happens AFTER the reference count on the file descriptor associated with the character device went down to zero but BEFORE the .release() callback was called from the workqueue and so BEFORE we unregistered from the notifier. Using the regular get_file() routine in this situation triggers the following warning: struct file::f_count incremented from zero; use-after-free condition present! So use the get_file_active() variant that will return NULL on file descriptors that have been or are being released. Fixes: 40b7c49950bd ("gpio: cdev: put emitting the line state events on a workqueue") Reported-by: Alexander Sverdlin Closes: https://lore.kernel.org/all/5d605f7fc99456804911403102a4fe999a14cc85.camel@siemens.com/ Tested-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20251117-gpio-cdev-get-file-v1-1-28a16b5985b8@linaro.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 24feb4001050603cf88085708f15b6aae8854f6f Author: Kuniyuki Iwashima Date: Mon Nov 17 17:47:10 2025 +0000 af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic(). [ Upstream commit 7bf3a476ce43833c49fceddbe94ff3472e04e9bc ] Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM socket. The unexpected behaviour is triggered when the peek offset is larger than the recv queue and the thread is unblocked by new data. Let's assume a socket which has "aaaa" in the recv queue and the peek offset is 4. First, unix_stream_read_generic() reads the offset 4 and skips the skb(s) of "aaaa" with the code below: skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */ do { ... while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); ... skb = skb_peek_next(skb, &sk->sk_receive_queue); if (!skb) goto again; /* @skip is 0. */ } The thread jumps to the 'again' label and goes to sleep since new data has not arrived yet. Later, new data "bbbb" unblocks the thread, and the thread jumps to the 'redo:' label to restart the entire process from the first skb in the recv queue. do { ... redo: ... last = skb = skb_peek(&sk->sk_receive_queue); ... again: if (skb == NULL) { ... timeo = unix_stream_data_wait(sk, timeo, last, last_len, freezable); ... goto redo; /* @skip is 0 !! */ However, the peek offset is not reset in the path. If the buffer size is 8, recv() will return "aaaabbbb" without skipping any data, and the final offset will be 12 (the original offset 4 + peeked skbs' length 8). After sleeping in unix_stream_read_generic(), we have to fetch the peek offset again. Let's move the redo label before mutex_lock(&u->iolock). Fixes: 9f389e35674f ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Reported-by: Miao Wang Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/ Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4d6b4bea8b80bfa13c903ba547538249e7c5e977 Author: Pradyumn Rahar Date: Mon Nov 17 14:16:08 2025 +0200 net/mlx5: Clean up only new IRQ glue on request_irq() failure [ Upstream commit d47515af6cccd7484d8b0870376858c9848a18ec ] The mlx5_irq_alloc() function can inadvertently free the entire rmap and end up in a crash[1] when the other threads tries to access this, when request_irq() fails due to exhausted IRQ vectors. This commit modifies the cleanup to remove only the specific IRQ mapping that was just added. This prevents removal of other valid mappings and ensures precise cleanup of the failed IRQ allocation's associated glue object. Note: This error is observed when both fwctl and rds configs are enabled. [1] mlx5_core 0000:05:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:05:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:06:00.0: Successfully registered panic handler for port 1 mlx5_core 0000:06:00.0: mlx5_irq_alloc:293:(pid 66740): Failed to request irq. err = -28 infiniband mlx5_0: mlx5_ib_test_wc:290:(pid 66740): Error -28 while trying to test write-combining support mlx5_core 0000:06:00.0: Successfully unregistered panic handler for port 1 mlx5_core 0000:03:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 mlx5_core 0000:05:00.0: mlx5_irq_alloc:293:(pid 28895): Failed to request irq. err = -28 general protection fault, probably for non-canonical address 0xe277a58fde16f291: 0000 [#1] SMP NOPTI RIP: 0010:free_irq_cpu_rmap+0x23/0x7d Call Trace: ? show_trace_log_lvl+0x1d6/0x2f9 ? show_trace_log_lvl+0x1d6/0x2f9 ? mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] ? __die_body.cold+0x8/0xa ? die_addr+0x39/0x53 ? exc_general_protection+0x1c4/0x3e9 ? dev_vprintk_emit+0x5f/0x90 ? asm_exc_general_protection+0x22/0x27 ? free_irq_cpu_rmap+0x23/0x7d mlx5_irq_alloc.cold+0x5d/0xf3 [mlx5_core] irq_pool_request_vector+0x7d/0x90 [mlx5_core] mlx5_irq_request+0x2e/0xe0 [mlx5_core] mlx5_irq_request_vector+0xad/0xf7 [mlx5_core] comp_irq_request_pci+0x64/0xf0 [mlx5_core] create_comp_eq+0x71/0x385 [mlx5_core] ? mlx5e_open_xdpsq+0x11c/0x230 [mlx5_core] mlx5_comp_eqn_get+0x72/0x90 [mlx5_core] ? xas_load+0x8/0x91 mlx5_comp_irqn_get+0x40/0x90 [mlx5_core] mlx5e_open_channel+0x7d/0x3c7 [mlx5_core] mlx5e_open_channels+0xad/0x250 [mlx5_core] mlx5e_open_locked+0x3e/0x110 [mlx5_core] mlx5e_open+0x23/0x70 [mlx5_core] __dev_open+0xf1/0x1a5 __dev_change_flags+0x1e1/0x249 dev_change_flags+0x21/0x5c do_setlink+0x28b/0xcc4 ? __nla_parse+0x22/0x3d ? inet6_validate_link_af+0x6b/0x108 ? cpumask_next+0x1f/0x35 ? __snmp6_fill_stats64.constprop.0+0x66/0x107 ? __nla_validate_parse+0x48/0x1e6 __rtnl_newlink+0x5ff/0xa57 ? kmem_cache_alloc_trace+0x164/0x2ce rtnl_newlink+0x44/0x6e rtnetlink_rcv_msg+0x2bb/0x362 ? __netlink_sendskb+0x4c/0x6c ? netlink_unicast+0x28f/0x2ce ? rtnl_calcit.isra.0+0x150/0x146 netlink_rcv_skb+0x5f/0x112 netlink_unicast+0x213/0x2ce netlink_sendmsg+0x24f/0x4d9 __sock_sendmsg+0x65/0x6a ____sys_sendmsg+0x28f/0x2c9 ? import_iovec+0x17/0x2b ___sys_sendmsg+0x97/0xe0 __sys_sendmsg+0x81/0xd8 do_syscall_64+0x35/0x87 entry_SYSCALL_64_after_hwframe+0x6e/0x0 RIP: 0033:0x7fc328603727 Code: c3 66 90 41 54 41 89 d4 55 48 89 f5 53 89 fb 48 83 ec 10 e8 0b ed ff ff 44 89 e2 48 89 ee 89 df 41 89 c0 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 48 89 44 24 08 e8 44 ed ff ff 48 RSP: 002b:00007ffe8eb3f1a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc328603727 RDX: 0000000000000000 RSI: 00007ffe8eb3f1f0 RDI: 000000000000000d RBP: 00007ffe8eb3f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffe8eb3f3c8 R15: 00007ffe8eb3f3bc ---[ end trace f43ce73c3c2b13a2 ]--- RIP: 0010:free_irq_cpu_rmap+0x23/0x7d Code: 0f 1f 80 00 00 00 00 48 85 ff 74 6b 55 48 89 fd 53 66 83 7f 06 00 74 24 31 db 48 8b 55 08 0f b7 c3 48 8b 04 c2 48 85 c0 74 09 <8b> 38 31 f6 e8 c4 0a b8 ff 83 c3 01 66 3b 5d 06 72 de b8 ff ff ff RSP: 0018:ff384881640eaca0 EFLAGS: 00010282 RAX: e277a58fde16f291 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ff2335e2e20b3600 RSI: 0000000000000000 RDI: ff2335e2e20b3400 RBP: ff2335e2e20b3400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000ffffffe4 R12: ff384881640ead88 R13: ff2335c3760751e0 R14: ff2335e2e1672200 R15: ff2335c3760751f8 FS: 00007fc32ac22480(0000) GS:ff2335e2d6e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f651ab54000 CR3: 00000029f1206003 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1dc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) kvm-guest: disable async PF for cpu 0 Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Signed-off-by: Mohith Kumar Thummaluru Tested-by: Mohith Kumar Thummaluru Reviewed-by: Moshe Shemesh Reviewed-by: Shay Drori Signed-off-by: Pradyumn Rahar Reviewed-by: Jacob Keller Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1763381768-1234998-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 542f45486f1ce2d2dde75bd85aca0389ef7046c3 Author: Shay Drory Date: Mon Nov 17 14:05:49 2025 +0200 devlink: rate: Unset parent pointer in devl_rate_nodes_destroy [ Upstream commit f94c1a114ac209977bdf5ca841b98424295ab1f0 ] The function devl_rate_nodes_destroy is documented to "Unset parent for all rate objects". However, it was only calling the driver-specific `rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing the parent's refcount, without actually setting the `devlink_rate->parent` pointer to NULL. This leaves a dangling pointer in the `devlink_rate` struct, which cause refcount error in netdevsim[1] and mlx5[2]. In addition, this is inconsistent with the behavior of `devlink_nl_rate_parent_node_set`, where the parent pointer is correctly cleared. This patch fixes the issue by explicitly setting `devlink_rate->parent` to NULL after notifying the driver, thus fulfilling the function's documented behavior for all rate objects. [1] repro steps: echo 1 > /sys/bus/netdevsim/new_device devlink dev eswitch set netdevsim/netdevsim1 mode switchdev echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs devlink port function rate add netdevsim/netdevsim1/test_node devlink port function rate set netdevsim/netdevsim1/128 parent test_node echo 1 > /sys/bus/netdevsim/del_device dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: devl_rate_leaf_destroy+0x8d/0x90 __nsim_dev_port_del+0x6c/0x70 [netdevsim] nsim_dev_reload_destroy+0x11c/0x140 [netdevsim] nsim_drv_remove+0x2b/0xb0 [netdevsim] device_release_driver_internal+0x194/0x1f0 bus_remove_device+0xc6/0x130 device_del+0x159/0x3c0 device_unregister+0x1a/0x60 del_device_store+0x111/0x170 [netdevsim] kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x55/0x10f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000 devlink port function rate add pci/0000:08:00.0/group1 devlink port function rate set pci/0000:08:00.0/32768 parent group1 modprobe -r mlx5_ib mlx5_fwctl mlx5_core dmesg: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0 CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:refcount_warn_saturate+0x42/0xe0 Call Trace: devl_rate_leaf_destroy+0x8d/0x90 mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core] mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core] mlx5_sf_esw_event+0xc4/0x120 [mlx5_core] notifier_call_chain+0x33/0xa0 blocking_notifier_call_chain+0x3b/0x50 mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core] mlx5_eswitch_disable+0x63/0x90 [mlx5_core] mlx5_unload+0x1d/0x170 [mlx5_core] mlx5_uninit_one+0xa2/0x130 [mlx5_core] remove_one+0x78/0xd0 [mlx5_core] pci_device_remove+0x39/0xa0 device_release_driver_internal+0x194/0x1f0 unbind_store+0x99/0xa0 kernfs_fop_write_iter+0x12e/0x1e0 vfs_write+0x215/0x3d0 ksys_write+0x5f/0xd0 do_syscall_64+0x53/0x1f0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Fixes: d75559845078 ("devlink: Allow setting parent node of rate objects") Signed-off-by: Shay Drory Reviewed-by: Carolina Jubran Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1763381149-1234377-1-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 87cd3b57ad635fcd9f2acb8c0a444ecc4d956ddf Author: Jared Kangas Date: Tue Nov 11 13:54:12 2025 -0800 pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc() [ Upstream commit 6010d4d8b55b5d3ae1efb5502c54312e15c14f21 ] s32_pmx_gpio_request_enable() does not initialize the newly-allocated gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs. This could result in a linked list corruption. Initialize the new list_head with INIT_LIST_HEAD() to fix this. Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support") Signed-off-by: Jared Kangas Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 7bbdd6c30e8fd92f7165b7730b038cfe42102004 Author: Jared Kangas Date: Tue Nov 11 13:54:11 2025 -0800 pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc [ Upstream commit 97ea34defbb57bfaf71ce487b1b0865ffd186e81 ] s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its fields are initialized. Notably, num_custom_params is used in pinconf_generic_parse_dt_config(), resulting in intermittent allocation errors, such as the following splat when probing i2c-imx: WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300 [...] Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT) [...] Call trace: __alloc_pages_noprof+0x290/0x300 (P) ___kmalloc_large_node+0x84/0x168 __kmalloc_large_node_noprof+0x34/0x120 __kmalloc_noprof+0x2ac/0x378 pinconf_generic_parse_dt_config+0x68/0x1a0 s32_dt_node_to_map+0x104/0x248 dt_to_map_one_config+0x154/0x1d8 pinctrl_dt_to_map+0x12c/0x280 create_pinctrl+0x6c/0x270 pinctrl_get+0xc0/0x170 devm_pinctrl_get+0x50/0xa0 pinctrl_bind_pins+0x60/0x2a0 really_probe+0x60/0x3a0 [...] __platform_driver_register+0x2c/0x40 i2c_adap_imx_init+0x28/0xff8 [i2c_imx] [...] This results in later parse failures that can cause issues in dependent drivers: s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property [...] pca953x 0-0022: failed writing register: -6 i2c i2c-0: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property i2c i2c-1: IMX I2C adapter registered s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property i2c i2c-2: IMX I2C adapter registered Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of devm_kmalloc() in s32_pinctrl_probe(), which sets the previously uninitialized fields to zero. Fixes: fd84aaa8173d ("pinctrl: add NXP S32 SoC family support") Signed-off-by: Jared Kangas Tested-by: Jan Petrous (OSS) Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 765236f2c4fbba7650436b71a0e350500e9ec15f Author: Grzegorz Nitka Date: Mon Oct 20 12:02:16 2025 +0200 ice: fix PTP cleanup on driver removal in error path [ Upstream commit 23a5b9b12de9dcd15ebae4f1abc8814ec1c51ab0 ] Improve the cleanup on releasing PTP resources in error path. The error case might happen either at the driver probe and PTP feature initialization or on PTP restart (errors in reset handling, NVM update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf function) and 'ps_lock' mutex deinitialization were missed. Additionally, ptp clock was not unregistered in the latter case. Keep PTP state as 'uninitialized' on init to distinguish between error scenarios and to avoid resource release duplication at driver removal. The consequence of missing ice_ptp_cleanup_pf call is the following call trace dumped when ice_adapter object is freed (port list is not empty, as it is required at this stage): [ T93022] ------------[ cut here ]------------ [ T93022] WARNING: CPU: 10 PID: 93022 at ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice] ... [ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice] ... [ T93022] Call Trace: [ T93022] [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? __warn.cold+0xb0/0x10e [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] ? report_bug+0xd8/0x150 [ T93022] ? handle_bug+0xe9/0x110 [ T93022] ? exc_invalid_op+0x17/0x70 [ T93022] ? asm_exc_invalid_op+0x1a/0x20 [ T93022] ? ice_adapter_put+0xef/0x100 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] [ T93022] pci_device_remove+0x42/0xb0 [ T93022] device_release_driver_internal+0x19f/0x200 [ T93022] driver_detach+0x48/0x90 [ T93022] bus_remove_driver+0x70/0xf0 [ T93022] pci_unregister_driver+0x42/0xb0 [ T93022] ice_module_exit+0x10/0xdb0 [ice 33d2647ad4f6d866d41eefff1806df37c68aef0c] ... [ T93022] ---[ end trace 0000000000000000 ]--- [ T93022] ice: module unloaded Fixes: e800654e85b5 ("ice: Use ice_adapter for PTP shared data instead of auxdev") Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Reviewed-by: Paul Menzel Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit d5be8663cff0ba7b94da34ebd499ce1123b4c334 Author: Emil Tantilov Date: Mon Oct 13 08:08:24 2025 -0700 idpf: fix possible vport_config NULL pointer deref in remove [ Upstream commit 118082368c2b6ddefe6cb607efc312285148f044 ] Attempting to remove the driver will cause a crash in cases where the vport failed to initialize. Following trace is from an instance where the driver failed during an attempt to create a VF: [ 1661.543624] idpf 0000:84:00.7: Device HW Reset initiated [ 1722.923726] idpf 0000:84:00.7: Transaction timed-out (op:1 cookie:2900 vc_op:1 salt:29 timeout:60000ms) [ 1723.353263] BUG: kernel NULL pointer dereference, address: 0000000000000028 ... [ 1723.358472] RIP: 0010:idpf_remove+0x11c/0x200 [idpf] ... [ 1723.364973] Call Trace: [ 1723.365475] [ 1723.365972] pci_device_remove+0x42/0xb0 [ 1723.366481] device_release_driver_internal+0x1a9/0x210 [ 1723.366987] pci_stop_bus_device+0x6d/0x90 [ 1723.367488] pci_stop_and_remove_bus_device+0x12/0x20 [ 1723.367971] pci_iov_remove_virtfn+0xbd/0x120 [ 1723.368309] sriov_disable+0x34/0xe0 [ 1723.368643] idpf_sriov_configure+0x58/0x140 [idpf] [ 1723.368982] sriov_numvfs_store+0xda/0x1c0 Avoid the NULL pointer dereference by adding NULL pointer check for vport_config[i], before freeing user_config.q_coalesce. Fixes: e1e3fec3e34b ("idpf: preserve coalescing settings across resets") Signed-off-by: Emil Tantilov Reviewed-by: Chittim Madhu Reviewed-by: Simon Horman Tested-by: Samuel Salin Reviewed-by: Aleksandr Loktionov Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 548071cbd81aae26bea6c2d169ac109250a8507c Author: Venkata Ramana Nayana Date: Fri Nov 7 14:01:41 2025 +0530 drm/xe/irq: Handle msix vector0 interrupt [ Upstream commit 5b38c22687d9287d85dd3bef2fa708bf62cf3895 ] Current gu2host handler registered as MSI-X vector 0 and as per bspec for a msix vector 0 interrupt, the driver must check the legacy registers 190008(TILE_INT_REG), 190060h (GT INTR Identity Reg 0) and other registers mentioned in "Interrupt Service Routine Pseudocode" otherwise it will block the next interrupts. To overcome this issue replacing guc2host handler with legacy xe_irq_handler. Fixes: da889070be7b2 ("drm/xe/irq: Separate MSI and MSI-X flows") Bspec: 62357 Signed-off-by: Venkata Ramana Nayana Reviewed-by: Balasubramani Vivekanandan Link: https://patch.msgid.link/20251107083141.2080189-1-venkata.ramana.nayana@intel.com Signed-off-by: Matt Roper (cherry picked from commit c34a14bce7090862ebe5a64abe8d85df75e62737) Signed-off-by: Lucas De Marchi Signed-off-by: Sasha Levin commit 123d4cc167bae587dd9107e078c4abd6aa8bd5f3 Author: Matt Roper Date: Thu Nov 13 15:40:39 2025 -0800 drm/xe/kunit: Fix forcewake assertion in mocs test [ Upstream commit 905a3468ec679293949438393de7e61310432662 ] The MOCS kunit test calls KUNIT_ASSERT_TRUE_MSG() with a condition of 'true;' this prevents the assertion from ever failing. Replace KUNIT_ASSERT_TRUE_MSG with KUNIT_FAIL_AND_ABORT to get the intended failure behavior in cases where forcewake was not acquired successfully. Fixes: 51c0ee84e4dc ("drm/xe/tests/mocs: Hold XE_FORCEWAKE_ALL for LNCF regs") Cc: Tejas Upadhyay Cc: Gustavo Sousa Reviewed-by: Lucas De Marchi Reviewed-by: Gustavo Sousa Link: https://patch.msgid.link/20251113234038.2256106-2-matthew.d.roper@intel.com Signed-off-by: Matt Roper (cherry picked from commit 9be4f0f687048ba77428ceca11994676736507b7) Signed-off-by: Lucas De Marchi Signed-off-by: Sasha Levin commit 5d60c61d6db1bf0d77bf730650587a75538fb293 Author: Dnyaneshwar Bhadane Date: Mon Sep 22 20:33:17 2025 +0530 drm/i915/xe3: Restrict PTL intel_encoder_is_c10phy() to only PHY A [ Upstream commit 5474560381775bc70cc90ed2acefad48ffd6ee07 ] On PTL, no combo PHY is connected to PORT B. However, PORT B can still be used for Type-C and will utilize the C20 PHY for eDP over Type-C. In such configurations, VBTs also enumerate PORT B. This leads to issues where PORT B is incorrectly identified as using the C10 PHY, due to the assumption that returning true for PORT B in intel_encoder_is_c10phy() would not cause problems. From PTL's perspective, only PORT A/PHY A uses the C10 PHY. Update the helper intel_encoder_is_c10phy() to return true only for PORT A/PHY on PTL. v2: Change the condition code style for ptl/wcl Bspec: 72571,73944 Fixes: 9d10de78a37f ("drm/i915/wcl: C10 phy connected to port A and B") Signed-off-by: Dnyaneshwar Bhadane Reviewed-by: Gustavo Sousa Signed-off-by: Suraj Kandpal Link: https://lore.kernel.org/r/20250922150317.2334680-4-dnyaneshwar.bhadane@intel.com (cherry picked from commit 8147f7a1c083fd565fb958824f7c552de3b2dc46) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit 1e83ae5df21a091dd5c7604dddc2cc37b9510ddd Author: Dnyaneshwar Bhadane Date: Mon Sep 22 20:33:16 2025 +0530 drm/i915/display: Add definition for wcl as subplatform [ Upstream commit 913253ed47b9925454cbb17faa3e350015b3d67a ] We will need to differentiate between WCL and PTL in intel_encoder_is_c10phy(). Since WCL and PTL use the same display architecture, let's define WCL as a subplatform of PTL to allow the differentiation. v2: Update commit message and reorder wcl define (Gustavo) Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane Reviewed-by: Gustavo Sousa Signed-off-by: Suraj Kandpal Link: https://lore.kernel.org/r/20250922150317.2334680-3-dnyaneshwar.bhadane@intel.com (cherry picked from commit 4dfaae643e59cf3ab71b88689dce1b874f036f00) Signed-off-by: Rodrigo Vivi [Rodrigo added Fixes tag when porting it to fixes] Signed-off-by: Sasha Levin commit 265a5be71e266b6b7736dff3369d0ca148068392 Author: Dnyaneshwar Bhadane Date: Mon Sep 22 20:33:15 2025 +0530 drm/pcids: Split PTL pciids group to make wcl subplatform [ Upstream commit 6eb2e056b0e418718fc5a3cfe79bdb41d9a2851d ] To form the WCL platform as a subplatform of PTL in definition, WCL pci ids are splited into saparate group from PTL. So update the pciidlist struct to cover all the pci ids. v2: - Squash wcl description in single patch for display and xe.(jani,gustavo) Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane Reviewed-by: Gustavo Sousa Signed-off-by: Suraj Kandpal Link: https://lore.kernel.org/r/20250922150317.2334680-2-dnyaneshwar.bhadane@intel.com (cherry picked from commit 32620e176443bf23ec81bfe8f177c6721a904864) Signed-off-by: Rodrigo Vivi [Rodrigo added the Fixes tag when porting it to fixes] Signed-off-by: Sasha Levin commit e441db07f208184e0466abf44b389a81d70c340e Author: Pavel Zhigulin Date: Thu Nov 13 14:27:56 2025 +0300 net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end() [ Upstream commit 896f1a2493b59beb2b5ccdf990503dbb16cb2256 ] The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate over 'cqe->len_list[]' using only a zero-length terminator as the stopping condition. If the terminator was missing or malformed, the loop could run past the end of the fixed-size array. Add an explicit bound check using ARRAY_SIZE() in both loops to prevent a potential out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 55482edc25f0 ("qede: Add slowpath/fastpath support and enable hardware GRO") Signed-off-by: Pavel Zhigulin Link: https://patch.msgid.link/20251113112757.4166625-1-Pavel.Zhigulin@kaspersky.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit db7b8773eb0e5d74ed6b1cd801a261b00e34f601 Author: Randy Dunlap Date: Mon Nov 10 22:09:34 2025 -0800 platform/x86: intel-uncore-freq: fix all header kernel-doc warnings [ Upstream commit db30233361f94e1a84450c607989bdb671100fb6 ] In file uncore-frequency/uncore-frequency-common.h, correct all kernel-doc warnings by adding missing leading " *" to some lines, adding a missing kernel-doc entry, and fixing a name typo. Warning: uncore-frequency-common.h:50 bad line: Storage for kobject attribute elc_low_threshold_percent Warning: uncore-frequency-common.h:52 bad line: Storage for kobject attribute elc_high_threshold_percent Warning: uncore-frequency-common.h:54 bad line: Storage for kobject attribute elc_high_threshold_enable Warning: uncore-frequency-common.h:92 struct member 'min_freq_khz_kobj_attr' not described in 'uncore_data' Warning: uncore-frequency-common.h:92 struct member 'die_id_kobj_attr' not described in 'uncore_data' Fixes: 24b6616355f7 ("platform/x86/intel-uncore-freq: Add efficiency latency control to sysfs interface") Fixes: 416de0246f35 ("platform/x86: intel-uncore-freq: Fix types in sysfs callbacks") Fixes: 247b43fcd872 ("platform/x86/intel-uncore-freq: Add attributes to show die_id") Signed-off-by: Randy Dunlap Link: https://patch.msgid.link/20251111060938.1998542-1-rdunlap@infradead.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 1d9ea42f5b1bb17d019ecc68384c3b465f5b06d5 Author: Haotian Zhang Date: Mon Nov 17 11:33:54 2025 +0800 platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos [ Upstream commit d8bb447efc5622577994287dc77c684fa8840b30 ] isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is returned from the probe function as is but probe functions should return normal errnos. A proper implementation can be found in drivers/leds/leds-ss4200.c. Convert PCIBIOS_* return codes using pcibios_err_to_errno() into normal errno before returning. Fixes: d3a23584294c ("platform/x86: ISST: Add Intel Speed Select mmio interface") Signed-off-by: Haotian Zhang Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20251117033354.132-1-vulab@iscas.ac.cn Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit f0e2a04f0fd09c938596fd2fa68248a7be77c38e Author: Lorenzo Bianconi Date: Thu Nov 13 18:19:38 2025 +0100 net: airoha: Do not loopback traffic to GDM2 if it is available on the device [ Upstream commit 8e0a754b0836d996802713bbebc87bc1cc17925c ] Airoha_eth driver forwards offloaded uplink traffic (packets received on GDM1 and forwarded to GDM{3,4}) to GDM2 in order to apply hw QoS. This is correct if the device does not support a dedicated GDM2 port. In this case, in order to enable hw offloading for uplink traffic, the packets should be sent to GDM{3,4} directly. Fixes: 9cd451d414f6 ("net: airoha: Add loopback support for GDM2") Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20251113-airoha-hw-offload-gdm2-fix-v1-1-7e4ca300872f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0243034486355d0694a75042c68c852b1e373ae4 Author: Lorenzo Bianconi Date: Thu Aug 14 09:51:16 2025 +0200 net: airoha: Add wlan flowtable TX offload [ Upstream commit a8bdd935d1ddb7186358fb60ffe84253e85340c8 ] Introduce support to offload the traffic received on the ethernet NIC and forwarded to the wireless one using HW Packet Processor Engine (PPE) capabilities. Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20250814-airoha-en7581-wlan-tx-offload-v1-1-72e0a312003e@kernel.org Signed-off-by: Paolo Abeni Stable-dep-of: 8e0a754b0836 ("net: airoha: Do not loopback traffic to GDM2 if it is available on the device") Signed-off-by: Sasha Levin commit f0fb86d427e10abf3aa7055fd1ccfe070464098c Author: Ido Schimmel Date: Sun Nov 16 10:10:29 2025 +0200 selftests: net: lib: Do not overwrite error messages [ Upstream commit bed22c7b90af732978715a1789bca1c3cfa245a6 ] ret_set_ksft_status() calls ksft_status_merge() with the current return status and the last one. It treats a non-zero return code from ksft_status_merge() as an indication that the return status was overwritten by the last one and therefore overwrites the return message with the last one. Currently, ksft_status_merge() returns a non-zero return code even if the current return status and the last one are equal. This results in return messages being overwritten which is counter-productive since we are more interested in the first failure message and not the last one. Fix by changing ksft_status_merge() to only return a non-zero return code if the current return status was actually changed. Add a test case which checks that the first error message is not overwritten. Before: # ./lib_sh_test.sh [...] TEST: RET tfail2 tfail -> fail [FAIL] retmsg=tfail expected tfail2 [...] # echo $? 1 After: # ./lib_sh_test.sh [...] TEST: RET tfail2 tfail -> fail [ OK ] [...] # echo $? 0 Fixes: 596c8819cb78 ("selftests: forwarding: Have RET track kselftest framework constants") Reviewed-by: Petr Machata Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7ff76f8dc6b550f8d16487bf3cebc278be720b5c Author: Aleksei Nikiforov Date: Wed Nov 12 19:27:24 2025 +0100 s390/ctcm: Fix double-kfree [ Upstream commit da02a1824884d6c84c5e5b5ac373b0c9e3288ec2 ] The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo. After that a call to function 'kfree' in function 'ctcmpc_unpack_skb' frees it again. Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'. Bug detected by the clang static analyzer. Fixes: 0c0b20587b9f25a2 ("s390/ctcm: fix potential memory leak") Reviewed-by: Aswin Karuvally Signed-off-by: Aleksei Nikiforov Signed-off-by: Aswin Karuvally Reviewed-by: Simon Horman Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fc13b6c92761d2def8cfc51e5a7b7bd795e76cb5 Author: Dnyaneshwar Bhadane Date: Thu Oct 16 18:45:17 2025 +0530 drm/i915/xe3lpd: Load DMC for Xe3_LPD version 30.02 [ Upstream commit fa766e759ff7b128ab77323d9d9c232434621bb6 ] Load the DMC for Xe3_LPD version 30.02. Fixes: 3c0f211bc8fc ("drm/xe: Add Wildcat Lake device IDs to PTL list") Signed-off-by: Dnyaneshwar Bhadane Reviewed-by: Gustavo Sousa Reviewed-by: Chaitanya Kumar Borah Link: https://lore.kernel.org/r/20251016131517.2032684-1-dnyaneshwar.bhadane@intel.com Signed-off-by: Gustavo Sousa (cherry picked from commit a63db39a578b543f5e5719b9f14dd82d3b8648d1) Signed-off-by: Rodrigo Vivi [Rodrigo added the Fixes tag while cherry-picking to fixes] Signed-off-by: Sasha Levin commit b03eb63288a8ffe3adfb34e68309c8e2edb06d0b Author: Shin'ichiro Kawasaki Date: Mon Nov 17 11:23:39 2025 +0900 nvme-multipath: fix lockdep WARN due to partition scan work [ Upstream commit 6d87cd5335784351280f82c47cc8a657271929c3 ] Blktests test cases nvme/014, 057 and 058 fail occasionally due to a lockdep WARN. As reported in the Closes tag URL, the WARN indicates that a deadlock can happen due to the dependency among disk->open_mutex, kblockd workqueue completion and partition_scan_work completion. To avoid the lockdep WARN and the potential deadlock, cut the dependency by running the partition_scan_work not by kblockd workqueue but by nvme_wq. Reported-by: Yi Zhang Closes: https://lore.kernel.org/linux-block/CAHj4cs8mJ+R_GmQm9R8ebResKAWUE8kF5+_WVg0v8zndmqd6BQ@mail.gmail.com/ Link: https://lore.kernel.org/linux-block/oeyzci6ffshpukpfqgztsdeke5ost5hzsuz4rrsjfmvpqcevax@5nhnwbkzbrpa/ Fixes: 1f021341eef4 ("nvme-multipath: defer partition scanning") Signed-off-by: Shin'ichiro Kawasaki Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit f9b222bda5965ba2590a408ce1899dc43dd6d131 Author: Alistair Francis Date: Fri Nov 7 09:17:11 2025 +1000 nvmet-auth: update sc_c in target host hash calculation [ Upstream commit 159de7a825aea4242d3f8d32de5853d269dbe72f ] Commit 7e091add9c43 "nvme-auth: update sc_c in host response" added the sc_c variable to the dhchap queue context structure which is appropriately set during negotiate and then used in the host response. This breaks secure concat connections with a Linux target as the target code wasn't updated at the same time. This patch fixes this by adding a new sc_c variable to the host hash calculations. Fixes: 7e091add9c43 ("nvme-auth: update sc_c in host response") Tested-by: Shin'ichiro Kawasaki Tested-by: Yi Zhang Reviewed-by: Martin George Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Alistair Francis Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit 6db49f6a2e80c2f1065e26c5c27f588e8749c141 Author: Chen Pei Date: Fri Nov 14 15:12:15 2025 +0800 tools: riscv: Fixed misalignment of CSR related definitions [ Upstream commit e2cb69263e797c0aa6676bcef23e9e27e44c83b0 ] The file tools/arch/riscv/include/asm/csr.h borrows from arch/riscv/include/asm/csr.h, and subsequent modifications related to CSR should maintain consistency. Signed-off-by: Chen Pei Link: https://patch.msgid.link/20251114071215.816-1-cp0613@linux.alibaba.com [pjw@kernel.org: dropped Fixes: lines for patches that weren't broken; removed superfluous blank line] Signed-off-by: Paul Walmsley Signed-off-by: Sasha Levin commit 6c8a8b9257a660e622689e23c8fbad4ba2b561b9 Author: Jesper Dangaard Brouer Date: Wed Nov 12 14:13:52 2025 +0100 veth: more robust handing of race to avoid txq getting stuck [ Upstream commit 5442a9da69789741bfda39f34ee7f69552bf0c56 ] Commit dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") introduced a race condition that can lead to a permanently stalled TXQ. This was observed in production on ARM64 systems (Ampere Altra Max). The race occurs in veth_xmit(). The producer observes a full ptr_ring and stops the queue (netif_tx_stop_queue()). The subsequent conditional logic, intended to re-wake the queue if the consumer had just emptied it (if (__ptr_ring_empty(...)) netif_tx_wake_queue()), can fail. This leads to a "lost wakeup" where the TXQ remains stopped (QUEUE_STATE_DRV_XOFF) and traffic halts. This failure is caused by an incorrect use of the __ptr_ring_empty() API from the producer side. As noted in kernel comments, this check is not guaranteed to be correct if a consumer is operating on another CPU. The empty test is based on ptr_ring->consumer_head, making it reliable only for the consumer. Using this check from the producer side is fundamentally racy. This patch fixes the race by adopting the more robust logic from an earlier version V4 of the patchset, which always flushed the peer: (1) In veth_xmit(), the racy conditional wake-up logic and its memory barrier are removed. Instead, after stopping the queue, we unconditionally call __veth_xdp_flush(rq). This guarantees that the NAPI consumer is scheduled, making it solely responsible for re-waking the TXQ. This handles the race where veth_poll() consumes all packets and completes NAPI *before* veth_xmit() on the producer side has called netif_tx_stop_queue. The __veth_xdp_flush(rq) will observe rx_notify_masked is false and schedule NAPI. (2) On the consumer side, the logic for waking the peer TXQ is moved out of veth_xdp_rcv() and placed at the end of the veth_poll() function. This placement is part of fixing the race, as the netif_tx_queue_stopped() check must occur after rx_notify_masked is potentially set to false during NAPI completion. This handles the race where veth_poll() consumes all packets, but haven't finished (rx_notify_masked is still true). The producer veth_xmit() stops the TXQ and __veth_xdp_flush(rq) will observe rx_notify_masked is true, meaning not starting NAPI. Then veth_poll() change rx_notify_masked to false and stops NAPI. Before exiting veth_poll() will observe TXQ is stopped and wake it up. Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Reviewed-by: Toshiaki Makita Signed-off-by: Jesper Dangaard Brouer Link: https://patch.msgid.link/176295323282.307447.14790015927673763094.stgit@firesoul Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4689ba45296dbb3a47e70a1bc2ed0328263e48f3 Author: Ilya Maximets Date: Wed Nov 12 12:14:03 2025 +0100 net: openvswitch: remove never-working support for setting nsh fields [ Upstream commit dfe28c4167a9259fc0c372d9f9473e1ac95cff67 ] The validation of the set(nsh(...)) action is completely wrong. It runs through the nsh_key_put_from_nlattr() function that is the same function that validates NSH keys for the flow match and the push_nsh() action. However, the set(nsh(...)) has a very different memory layout. Nested attributes in there are doubled in size in case of the masked set(). That makes proper validation impossible. There is also confusion in the code between the 'masked' flag, that says that the nested attributes are doubled in size containing both the value and the mask, and the 'is_mask' that says that the value we're parsing is the mask. This is causing kernel crash on trying to write into mask part of the match with SW_FLOW_KEY_PUT() during validation, while validate_nsh() doesn't allocate any memory for it: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary) RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch] Call Trace: validate_nsh+0x60/0x90 [openvswitch] validate_set.constprop.0+0x270/0x3c0 [openvswitch] __ovs_nla_copy_actions+0x477/0x860 [openvswitch] ovs_nla_copy_actions+0x8d/0x100 [openvswitch] ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch] genl_family_rcv_msg_doit+0xdb/0x130 genl_family_rcv_msg+0x14b/0x220 genl_rcv_msg+0x47/0xa0 netlink_rcv_skb+0x53/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x280/0x3b0 netlink_sendmsg+0x1f7/0x430 ____sys_sendmsg+0x36b/0x3a0 ___sys_sendmsg+0x87/0xd0 __sys_sendmsg+0x6d/0xd0 do_syscall_64+0x7b/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The third issue with this process is that while trying to convert the non-masked set into masked one, validate_set() copies and doubles the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested attributes. It should be copying each nested attribute and doubling them in size independently. And the process must be properly reversed during the conversion back from masked to a non-masked variant during the flow dump. In the end, the only two outcomes of trying to use this action are either validation failure or a kernel crash. And if somehow someone manages to install a flow with such an action, it will most definitely not do what it is supposed to, since all the keys and the masks are mixed up. Fixing all the issues is a complex task as it requires re-writing most of the validation code. Given that and the fact that this functionality never worked since introduction, let's just remove it altogether. It's better to re-introduce it later with a proper implementation instead of trying to fix it in stable releases. Fixes: b2d0f5d5dc53 ("openvswitch: enable NSH support") Reported-by: Junvy Yang Signed-off-by: Ilya Maximets Acked-by: Eelco Chaudron Reviewed-by: Aaron Conole Link: https://patch.msgid.link/20251112112246.95064-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ffaa32216604ccec70b7cfe8413f2cf14dc18542 Author: Pavel Zhigulin Date: Thu Nov 13 19:19:21 2025 +0300 net: mlxsw: linecards: fix missing error check in mlxsw_linecard_devlink_info_get() [ Upstream commit b0c959fec18f4595a6a6317ffc30615cfa37bf69 ] The call to devlink_info_version_fixed_put() in mlxsw_linecard_devlink_info_get() did not check for errors, although it is checked everywhere in the code. Add missed 'err' check to the mlxsw_linecard_devlink_info_get() Fixes: 3fc0c51905fb ("mlxsw: core_linecards: Expose device PSID over device info") Signed-off-by: Pavel Zhigulin Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20251113161922.813828-1-Pavel.Zhigulin@kaspersky.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3e4306dc9e4741aa3ec6ea65e41eb47624bab06c Author: Pavel Zhigulin Date: Thu Nov 13 16:57:44 2025 +0300 net: dsa: hellcreek: fix missing error handling in LED registration [ Upstream commit e6751b0b19a6baab219a62e1e302b8aa6b5a55b2 ] The LED setup routine registered both led_sync_good and led_is_gm devices without checking the return values of led_classdev_register(). If either registration failed, the function continued silently, leaving the driver in a partially-initialized state and leaking a registered LED classdev. Add proper error handling Fixes: 7d9ee2e8ff15 ("net: dsa: hellcreek: Add PTP status LEDs") Signed-off-by: Pavel Zhigulin Reviewed-by: Andrew Lunn Acked-by: Kurt Kanzenbach Link: https://patch.msgid.link/20251113135745.92375-1-Pavel.Zhigulin@kaspersky.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 27ea5c2c75c3419a9a019240ca44b9256f628df1 Author: Prateek Agarwal Date: Fri Sep 19 13:25:40 2025 +0900 drm/tegra: Add call to put_pid() [ Upstream commit 6cbab9f0da72b4dc3c3f9161197aa3b9daa1fa3a ] Add a call to put_pid() corresponding to get_task_pid(). host1x_memory_context_alloc() does not take ownership of the PID so we need to free it here to avoid leaking. Signed-off-by: Prateek Agarwal Fixes: e09db97889ec ("drm/tegra: Support context isolation") [mperttunen@nvidia.com: reword commit message] Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20250919-host1x-put-pid-v1-1-19c2163dfa87@nvidia.com Signed-off-by: Sasha Levin commit c0ab757b86402299f177087dfc023807a6ca27d0 Author: Zilin Guan Date: Wed Nov 12 05:21:14 2025 +0000 mlxsw: spectrum: Fix memory leak in mlxsw_sp_flower_stats() [ Upstream commit 407a06507c2358554958e8164dc97176feddcafc ] The function mlxsw_sp_flower_stats() calls mlxsw_sp_acl_ruleset_get() to obtain a ruleset reference. If the subsequent call to mlxsw_sp_acl_rule_lookup() fails to find a rule, the function returns an error without releasing the ruleset reference, causing a memory leak. Fix this by using a goto to the existing error handling label, which calls mlxsw_sp_acl_ruleset_put() to properly release the reference. Fixes: 7c1b8eb175b69 ("mlxsw: spectrum: Add support for TC flower offload statistics") Signed-off-by: Zilin Guan Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20251112052114.1591695-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8817f816ae41908e9625c0770c4af0dcdcc01238 Author: Jiaming Zhang Date: Wed Nov 12 01:36:52 2025 +0800 net: core: prevent NULL deref in generic_hwtstamp_ioctl_lower() [ Upstream commit f796a8dec9beafcc0f6f0d3478ed685a15c5e062 ] The ethtool tsconfig Netlink path can trigger a null pointer dereference. A call chain such as: tsconfig_prepare_data() -> dev_get_hwtstamp_phylib() -> vlan_hwtstamp_get() -> generic_hwtstamp_get_lower() -> generic_hwtstamp_ioctl_lower() results in generic_hwtstamp_ioctl_lower() being called with kernel_cfg->ifr as NULL. The generic_hwtstamp_ioctl_lower() function does not expect a NULL ifr and dereferences it, leading to a system crash. Fix this by adding a NULL check for kernel_cfg->ifr in generic_hwtstamp_ioctl_lower(). If ifr is NULL, return -EINVAL. Fixes: 6e9e2eed4f39 ("net: ethtool: Add support for tsconfig command to get/set hwtstamp config") Closes: https://lore.kernel.org/cd6a7056-fa6d-43f8-b78a-f5e811247ba8@linux.dev Signed-off-by: Jiaming Zhang Reviewed-by: Kory Maincent Link: https://patch.msgid.link/20251111173652.749159-2-r772577952@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 958ca19e8d62887ef20ed6f872ce87bfe3e2a15b Author: Aleksander Jan Bajkowski Date: Fri Oct 17 20:01:19 2025 +0200 mips: dts: econet: fix EN751221 core type [ Upstream commit 09782e72eec451fa14d327595f86cdc338ebe53c ] In fact, it is a multi-threaded MIPS34Kc, not a single-threaded MIPS24Kc. Fixes: 0ec488700972 ("mips: dts: Add EcoNet DTS with EN751221 and SmartFiber XP8421-B board") Signed-off-by: Aleksander Jan Bajkowski Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 78f10294683a073087e886695168b02690cfbd28 Author: Armin Wolf Date: Mon Nov 10 12:12:53 2025 +0100 platform/x86: msi-wmi-platform: Fix typo in WMI GUID [ Upstream commit 97b726eb1dc2b4a2532544eb3da72bb6acbd39a3 ] The WMI driver core only supports GUID strings containing only uppercase characters, however the GUID string used by the msi-wmi-platform driver contains a single lowercase character. This prevents the WMI driver core from matching said driver to its WMI device. Fix this by turning the lowercase character into a uppercase character. Also update the WMI driver development guide to warn about this. Reported-by: Antheas Kapenekakis Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver") Tested-by: Antheas Kapenekakis Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit e45172b353dbdb65946f2444eb260fcb4a02eb68 Author: Armin Wolf Date: Mon Nov 10 12:12:52 2025 +0100 platform/x86: msi-wmi-platform: Only load on MSI devices [ Upstream commit c93433fd4e2bbbe7caa67b53d808b4a084852ff3 ] It turns out that the GUID used by the msi-wmi-platform driver (ABBC0F60-8EA1-11D1-00A0-C90629100000) is not unique, but was instead copied from the WIndows Driver Samples. This means that this driver could load on devices from other manufacturers that also copied this GUID, potentially causing hardware errors. Prevent this by only loading on devices whitelisted via DMI. The DMI matches where taken from the msi-ec driver. Reported-by: Antheas Kapenekakis Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver") Tested-by: Antheas Kapenekakis Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20251110111253.16204-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit d7adbba9298fd74dde0abed5c93312c08c9e6507 Author: Haotian Zhang Date: Tue Oct 28 11:05:09 2025 +0800 pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe() [ Upstream commit 9b07cdf86a0b90556f5b68a6b20b35833b558df3 ] The driver calls fwnode_get_named_child_node() which takes a reference on the child node, but never releases it, which causes a reference leak. Fix by using devm_add_action_or_reset() to automatically release the reference when the device is removed. Fixes: d5282a539297 ("pinctrl: cs42l43: Add support for the cs42l43") Suggested-by: Charles Keepax Signed-off-by: Haotian Zhang Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit f8bd0d6eb63159f0afe099908589ff01531c2501 Author: Jianbo Liu Date: Wed Oct 29 11:50:25 2025 +0200 xfrm: Prevent locally generated packets from direct output in tunnel mode [ Upstream commit 59630e2ccd728703cc826e3a3515d70f8c7a766c ] Add a check to ensure locally generated packets (skb->sk != NULL) do not use direct output in tunnel mode, as these packets require proper L2 header setup that is handled by the normal XFRM processing path. Fixes: 5eddd76ec2fd ("xfrm: fix tunnel mode TX datapath in packet offload mode") Signed-off-by: Jianbo Liu Reviewed-by: Leon Romanovsky Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 6e36af80ad8ef95875aba7a7dd9be782a967a718 Author: Jianbo Liu Date: Tue Oct 28 04:22:48 2025 +0200 xfrm: Determine inner GSO type from packet inner protocol [ Upstream commit 61fafbee6cfed283c02a320896089f658fa67e56 ] The GSO segmentation functions for ESP tunnel mode (xfrm4_tunnel_gso_segment and xfrm6_tunnel_gso_segment) were determining the inner packet's L2 protocol type by checking the static x->inner_mode.family field from the xfrm state. This is unreliable. In tunnel mode, the state's actual inner family could be defined by x->inner_mode.family or by x->inner_mode_iaf.family. Checking only the former can lead to a mismatch with the actual packet being processed, causing GSO to create segments with the wrong L2 header type. This patch fixes the bug by deriving the inner mode directly from the packet's inner protocol stored in XFRM_MODE_SKB_CB(skb)->protocol. Instead of replicating the code, this patch modifies the xfrm_ip2inner_mode helper function. It now correctly returns &x->inner_mode if the selector family (x->sel.family) is already specified, thereby handling both specific and AF_UNSPEC cases appropriately. With this change, ESP GSO can use xfrm_ip2inner_mode to get the correct inner mode. It doesn't affect existing callers, as the updated logic now mirrors the checks they were already performing externally. Fixes: 26dbd66eab80 ("esp: choose the correct inner protocol for GSO on inter address family tunnels") Signed-off-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit da6f9c14d299c11c0f69bcdeb9e51002b08ab48a Author: Jianbo Liu Date: Tue Oct 28 04:22:47 2025 +0200 xfrm: Check inner packet family directly from skb_dst [ Upstream commit 082ef944e55da8a9a8df92e3842ca82a626d359a ] In the output path, xfrm_dev_offload_ok and xfrm_get_inner_ipproto need to determine the protocol family of the inner packet (skb) before it gets encapsulated. In xfrm_dev_offload_ok, the code checked x->inner_mode.family. This is unreliable because, for states handling both IPv4 and IPv6, the relevant inner family could be either x->inner_mode.family or x->inner_mode_iaf.family. Checking only the former can lead to a mismatch with the actual packet being processed. In xfrm_get_inner_ipproto, the code checked x->outer_mode.family. This is also incorrect for tunnel mode, as the inner packet's family can be different from the outer header's family. At both of these call sites, the skb variable holds the original inner packet. The most direct and reliable source of truth for its protocol family is its destination entry. This patch fixes the issue by using skb_dst(skb)->ops->family to ensure protocol-specific headers are only accessed for the correct packet type. Fixes: 91d8a53db219 ("xfrm: fix offloading of cross-family tunnels") Fixes: 45a98ef4922d ("net/xfrm: IPsec tunnel mode fix inner_ipproto setting in sec_path") Signed-off-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Reviewed-by: Zhu Yanjun Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit ffab2ceaf095dae8ac7b62c7bea2100ed0c7bf52 Author: Yu-Chun Lin Date: Thu Oct 23 15:55:29 2025 +0800 pinctrl: realtek: Select REGMAP_MMIO for RTD driver [ Upstream commit 369f772299821f93f872bf1b4d7d7ed2fc50243b ] The pinctrl-rtd driver uses 'devm_regmap_init_mmio', which requires 'REGMAP_MMIO' to be enabled. Without this selection, the build fails with an undefined reference: aarch64-none-linux-gnu-ld: drivers/pinctrl/realtek/pinctrl-rtd.o: in function rtd_pinctrl_probe': pinctrl-rtd.c:(.text+0x5a0): undefined reference to __devm_regmap_init_mmio_clk' Fix this by selecting 'REGMAP_MMIO' in the Kconfig. Fixes: e99ce78030db ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs") Signed-off-by: Yu-Chun Lin Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 290939cf0a9faebb13fa05afc5263ceae6cfad30 Author: Chen-Yu Tsai Date: Tue Oct 21 01:10:52 2025 +0800 clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate [ Upstream commit 2050280a4bb660b47f8cccf75a69293ae7cbb087 ] While the user manual states that the PLL's rate should be between 180 MHz and 3 GHz in the register defninition section, it also says the actual operating frequency is 22.5792*4 MHz in the PLL features table. 22.5792*4 MHz is one of the actual clock rates that we want and is is available in the SDM table. Lower the minimum clock rate to 90 MHz so that both rates in the SDM table can be used. Fixes: 7cae1e2b5544 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs") Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20251020171059.2786070-7-wens@kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin commit ad6fcccc4eed9d49233d6265aa57e93db0a14286 Author: Chen-Yu Tsai Date: Tue Oct 21 01:10:51 2025 +0800 clk: sunxi-ng: sun55i-a523-r-ccu: Mark bus-r-dma as critical [ Upstream commit 5888533c6011de319c5f23ae147f1f291ce81582 ] The "bus-r-dma" clock in the A523's PRCM clock controller is also referred to as "DMA_CLKEN_SW" or "DMA ADB400 gating". It is unclear how this ties into the DMA controller MBUS clock gate; however if the clock is not enabled, the DMA controller in the MCU block will fail to access DRAM, even failing to retrieve the DMA descriptors. Mark this clock as critical. This sort of mirrors what is done for the main DMA controller's MBUS clock, which has a separate toggle that is currently left out of the main clock controller driver. Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU") Acked-by: Jernej Skrabec Link: https://patch.msgid.link/20251020171059.2786070-6-wens@kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin commit 4f2525a05ba00d8bcd63e2d2000ff89106f99704 Author: Jernej Skrabec Date: Mon Oct 20 17:27:04 2025 +0200 clk: sunxi-ng: Mark A523 bus-r-cpucfg clock as critical [ Upstream commit 1dba74abf3e2fa4484b924d8ba6e54e64ebb8c82 ] bus-r-cpucfg clock is important for peripheral which takes care of powering CPU cores on and off. Since this operation is done by firmware (TF-A), mark it as critical. That way Linux won't interfere with that clock. Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU") Signed-off-by: Jernej Skrabec Reviewed-by: Andre Przywara Tested-by: Andre Przywara Link: https://patch.msgid.link/20251020152704.4804-1-jernej.skrabec@gmail.com Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin commit e2aa2db2a1771ceba07da13d61a1f6ec1340840b Author: Sabrina Dubroca Date: Thu Oct 16 12:39:16 2025 +0200 xfrm: set err and extack on failure to create pcpu SA [ Upstream commit 1dcf617bec5cb85f68ca19969e7537ef6f6931d3 ] xfrm_state_construct can fail without setting an error if the requested pcpu_num value is too big. Set err and add an extack message to avoid confusing userspace. Fixes: 1ddf9916ac09 ("xfrm: Add support for per cpu xfrm state handling.") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 06ccae7bace4de422ea399acec9e7f213d79e14b Author: Sabrina Dubroca Date: Thu Oct 16 12:39:15 2025 +0200 xfrm: call xfrm_dev_state_delete when xfrm_state_migrate fails to add the state [ Upstream commit 7f02285764790e0ff1a731b4187fa3e389ed02c7 ] In case xfrm_state_migrate fails after calling xfrm_dev_state_add, we directly release the last reference and destroy the new state, without calling xfrm_dev_state_delete (this only happens in __xfrm_state_delete, which we're not calling on this path, since the state was never added). Call xfrm_dev_state_delete on error when an offload configuration was provided. Fixes: ab244a394c7f ("xfrm: Migrate offload configuration") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit d6fe5c740c573af10943b8353992e1325cdb2715 Author: Sabrina Dubroca Date: Thu Oct 16 12:39:13 2025 +0200 xfrm: also call xfrm_state_delete_tunnel at destroy time for states that were never added [ Upstream commit 10deb69864840ccf96b00ac2ab3a2055c0c04721 ] In commit b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x"), I missed the case where state creation fails between full initialization (->init_state has been called) and being inserted on the lists. In this situation, ->init_state has been called, so for IPcomp tunnels, the fallback tunnel has been created and added onto the lists, but the user state never gets added, because we fail before that. The user state doesn't go through __xfrm_state_delete, so we don't call xfrm_state_delete_tunnel for those states, and we end up leaking the FB tunnel. There are several codepaths affected by this: the add/update paths, in both net/key and xfrm, and the migrate code (xfrm_migrate, xfrm_state_migrate). A "proper" rollback of the init_state work would probably be doable in the add/update code, but for migrate it gets more complicated as multiple states may be involved. At some point, the new (not-inserted) state will be destroyed, so call xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states will have their fallback tunnel cleaned up during __xfrm_state_delete, which solves the issue that b441cf3f8c4b (and other patches before it) aimed at. All states (including FB tunnels) will be removed from the lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work). Reported-by: syzbot+999eb23467f83f9bf9bf@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=999eb23467f83f9bf9bf Fixes: b441cf3f8c4b ("xfrm: delete x->tunnel as we delete x") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 041de1f9bcf440a27db17bb8340a1f91dd9a6c5b Author: Sabrina Dubroca Date: Thu Oct 16 12:39:12 2025 +0200 xfrm: drop SA reference in xfrm_state_update if dir doesn't match [ Upstream commit 8d2a2a49c30f67a480fa9ed25e08436a446f057e ] We're not updating x1, but we still need to put() it. Fixes: a4a87fa4e96c ("xfrm: Add Direction to the SA in or out") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit f74c52176857624669ce630ae61a94fb9565b03b Author: Louis-Alexis Eyraud Date: Fri Oct 3 15:48:49 2025 +0200 pinctrl: mediatek: mt8189: align register base names to dt-bindings ones [ Upstream commit 518919276c4119e34e24334003af70ab12477f00 ] The mt8189-pinctrl driver requires to probe that a device tree uses in the device node the same names than mt8189_pinctrl_register_base_names array. But they are not matching the required ones in the "mediatek,mt8189-pinctrl" dt-bindings, leading to possible dtbs check issues. The mt8189_pinctrl_register_base_names entry order is also different. So, align all mt8189_pinctrl_register_base_names entry names and order on dt-bindings. Fixes: a3fe1324c3c5 ("pinctrl: mediatek: Add pinctrl driver for mt8189") Signed-off-by: Louis-Alexis Eyraud Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit eaf952dc53146651d591377ac1e6ba730ec1e324 Author: Louis-Alexis Eyraud Date: Fri Oct 3 16:00:28 2025 +0200 pinctrl: mediatek: mt8196: align register base names to dt-bindings ones [ Upstream commit 404ee89b4008cf2130554dac2c64cd8412601356 ] The mt8196-pinctrl driver requires to probe that a device tree uses in the device node the same names than mt8196_pinctrl_register_base_names array. But they are not matching the required ones in the "mediatek,mt8196-pinctrl" dt-bindings, leading to possible dtbs check issues. So, align all mt8196_pinctrl_register_base_names entries on dt-bindings ones. Fixes: f7a29377c253 ("pinctrl: mediatek: Add pinctrl driver on mt8196") Signed-off-by: Louis-Alexis Eyraud Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 5e4f2caf39a6b6c73ad747cb254aaf7fc878c1be Author: Kiryl Shutsemau Date: Mon Oct 27 11:56:36 2025 +0000 mm/truncate: unmap large folio on split failure commit fa04f5b60fda62c98a53a60de3a1e763f11feb41 upstream. Accesses within VMA, but beyond i_size rounded up to PAGE_SIZE are supposed to generate SIGBUS. This behavior might not be respected on truncation. During truncation, the kernel splits a large folio in order to reclaim memory. As a side effect, it unmaps the folio and destroys PMD mappings of the folio. The folio will be refaulted as PTEs and SIGBUS semantics are preserved. However, if the split fails, PMD mappings are preserved and the user will not receive SIGBUS on any accesses within the PMD. Unmap the folio on split failure. It will lead to refault as PTEs and preserve SIGBUS semantics. Make an exception for shmem/tmpfs that for long time intentionally mapped with PMDs across i_size. Link: https://lkml.kernel.org/r/20251027115636.82382-3-kirill@shutemov.name Fixes: b9a8a4195c7d ("truncate,shmem: Handle truncates that split large folios") Signed-off-by: Kiryl Shutsemau Cc: Al Viro Cc: Baolin Wang Cc: Christian Brauner Cc: "Darrick J. Wong" Cc: Dave Chinner Cc: David Hildenbrand Cc: Hugh Dickins Cc: Johannes Weiner Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Mike Rapoport Cc: Rik van Riel Cc: Shakeel Butt Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit aed494225be85b72212af229db549a082025ec72 Author: Ivan Lipski Date: Wed Nov 5 15:27:42 2025 -0500 drm/amd/display: Clear the CUR_ENABLE register on DCN20 on DPP5 commit 5bab4c89390f32b2f491f49a151948cd226dd909 upstream. [Why] On DCN20 & DCN30, the 6th DPP's & HUBP's are powered on permanently and cannot be power gated. Thus, when dpp_reset() is invoked for the DPP5, while it's still powered on, the cached cursor_state (dpp_base->pos.cur0_ctl.bits.cur0_enable) and the actual state (CUR0_ENABLE) bit are unsycned. This can cause a double cursor in full screen with non-native scaling. [How] Force disable cursor on DPP5 on plane powerdown for ASICs w/ 6 DPPs/HUBPs. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4673 Reviewed-by: Aric Cyr Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 79b3c037f972dcb13e325a8eabfb8da835764e15) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 18030e84cbda014787369b6d4cde8404fa2d08fc Author: Fangzhi Zuo Date: Fri Nov 7 15:01:30 2025 -0500 drm/amd/display: Fix pbn to kbps Conversion commit 1788ef30725da53face7e311cdf62ad65fababcd upstream. [Why] Existing routine has two conversion sequence, pbn_to_kbps and kbps_to_pbn with margin. Non of those has without-margin calculation. kbps_to_pbn with margin conversion includes fec overhead which has already been included in pbn_div calculation with 0.994 factor considered. It is a double counted fec overhead factor that causes potential bw loss. [How] Add without-margin calculation. Fix fec overhead double counted issue. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3735 Reviewed-by: Aurabindo Pillai Signed-off-by: Fangzhi Zuo Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit e0dec00f3d05e8c0eceaaebfdca217f8d10d380c) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 364ce6bb932921e1b5e6cddd9048cc3b4af0ea73 Author: Mario Limonciello (AMD) Date: Mon Nov 3 11:17:44 2025 -0600 drm/amd/display: Move sleep into each retry for retrieve_link_cap() commit 71ad9054c1f241be63f9d11df8cbd0aa0352fe16 upstream. [Why] When a monitor is booting it's possible that it isn't ready to retrieve link caps and this can lead to an EDID read failure: ``` [drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed. amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read. ``` [How] Rather than msleep once and try a few times, msleep each time. Should be no changes for existing working monitors, but should correct reading caps on a monitor that is slow to boot. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 5266f825a631b244cac0b97d8ec93fd6483a7b30 Author: Mario Limonciello (AMD) Date: Mon Nov 3 12:11:31 2025 -0600 drm/amd/display: Increase DPCD read retries commit 8612badc331bcab2068baefa69e1458085ed89e3 upstream. [Why] Empirical measurement of some monitors that fail to read EDID while booting shows that the number of retries with a 30ms delay between tries is as high as 16. [How] Increase number of retries to 20. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ad1c59ad7cf74ec06e32fe2c330ac1e957222288) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 9c03896ec657d3eb2af82f567a57054f735e4ccc Author: Yifan Zha Date: Fri Nov 14 17:48:58 2025 +0800 drm/amdgpu: Skip emit de meta data on gfx11 with rs64 enabled commit 80d8a9ad1587b64c545d515ab6cb7ecb9908e1b3 upstream. [Why] Accoreding to CP updated to RS64 on gfx11, WRITE_DATA with PREEMPTION_META_MEMORY(dst_sel=8) is illegal for CP FW. That packet is used for MCBP on F32 based system. So it would lead to incorrect GRBM write and FW is not handling that extra case correctly. [How] With gfx11 rs64 enabled, skip emit de meta data. Signed-off-by: Yifan Zha Acked-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 8366cd442d226463e673bed5d199df916f4ecbcf) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 9539c00f44033fcbdaa0673bb370c4a148df1206 Author: Mario Limonciello Date: Tue Nov 18 07:18:10 2025 -0600 drm/amd: Skip power ungate during suspend for VPE commit 31ab31433c9bd2f255c48dc6cb9a99845c58b1e4 upstream. During the suspend sequence VPE is already going to be power gated as part of vpe_suspend(). It's unnecessary to call during calls to amdgpu_device_set_pg_state(). It actually can expose a race condition with the firmware if s0i3 sequence starts as well. Drop these calls. Cc: Peyton.Lee@amd.com Reviewed-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher (cherry picked from commit 2a6c826cfeedd7714611ac115371a959ead55bda) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 860f93f4fce1e733b8a2474f6bfa153243d775f3 Author: Ville Syrjälä Date: Thu Nov 13 01:30:28 2025 +0200 drm/plane: Fix create_in_format_blob() return value commit cead55e24cf9e092890cf51c0548eccd7569defa upstream. create_in_format_blob() is either supposed to return a valid pointer or an error, but never NULL. The caller will dereference the blob when it is not an error, and thus will oops if NULL returned. Return proper error values in the failure cases. Cc: stable@vger.kernel.org Cc: Arun R Murthy Fixes: 0d6dcd741c26 ("drm/plane: modify create_in_formats to acommodate async") Signed-off-by: Ville Syrjälä Link: https://patch.msgid.link/20251112233030.24117-2-ville.syrjala@linux.intel.com Reviewed-by: Arun R Murthy Signed-off-by: Greg Kroah-Hartman commit 7e3e9b3a44c23c8eac86a41308c05077d6d30f41 Author: Robert McClinton Date: Sun Nov 16 12:33:21 2025 -0500 drm/radeon: delete radeon_fence_process in is_signaled, no deadlock commit 9eb00b5f5697bd56baa3222c7a1426fa15bacfb5 upstream. Delete the attempt to progress the queue when checking if fence is signaled. This avoids deadlock. dma-fence_ops::signaled can be called with the fence lock in unknown state. For radeon, the fence lock is also the wait queue lock. This can cause a self deadlock when signaled() tries to make forward progress on the wait queue. But advancing the queue is unneeded because incorrectly returning false from signaled() is perfectly acceptable. Link: https://github.com/brave/brave-browser/issues/49182 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4641 Cc: Alex Deucher Signed-off-by: Robert McClinton Signed-off-by: Alex Deucher (cherry picked from commit 527ba26e50ec2ca2be9c7c82f3ad42998a75d0db) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 5c0fd637547d8d88579bb45347466ec67c0d81e0 Author: Ma Ke Date: Wed Oct 22 19:47:20 2025 +0800 drm/tegra: dc: Fix reference leak in tegra_dc_couple() commit 4c5376b4b143c4834ebd392aef2215847752b16a upstream. driver_find_device() calls get_device() to increment the reference count once a matching device is found, but there is no put_device() to balance the reference count. To avoid reference count leakage, add put_device() to decrease the reference count. Found by code review. Cc: stable@vger.kernel.org Fixes: a31500fe7055 ("drm/tegra: dc: Restore coupling of display controllers") Signed-off-by: Ma Ke Acked-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20251022114720.24937-1-make24@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 51667e623da0fc71ca7389f581963bfb0c1ed80c Author: Paolo Abeni Date: Tue Nov 18 08:20:22 2025 +0100 mptcp: do not fallback when OoO is present commit 1bba3f219c5e8c29e63afa3c1fc24f875ebec119 upstream. In case of DSS corruption, the MPTCP protocol tries to avoid the subflow reset if fallback is possible. Such corruptions happen in the receive path; to ensure fallback is possible the stack additionally needs to check for OoO data, otherwise the fallback will break the data stream. Fixes: e32d262c89e2 ("mptcp: handle consistently DSS corruption") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/598 Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-4-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5d18a8969116e8d9114fa7c696b48b52b15afe0a Author: Paolo Abeni Date: Tue Nov 18 08:20:23 2025 +0100 mptcp: decouple mptcp fastclose from tcp close commit fff0c87996672816a84c3386797a5e69751c5888 upstream. With the current fastclose implementation, the mptcp_do_fastclose() helper is in charge of two distinct actions: send the fastclose reset and cleanup the subflows. Formally decouple the two steps, ensuring that mptcp explicitly closes all the subflows after the mentioned helper. This will make the upcoming fix simpler, and allows dropping the 2nd argument from mptcp_destroy_common(). The Fixes tag is then the same as in the next commit to help with the backports. Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7731ebbb499d7a463d8e6d24eabf3cd6fd1371bf Author: Paolo Abeni Date: Tue Nov 18 08:20:20 2025 +0100 mptcp: avoid unneeded subflow-level drops commit 4f102d747cadd8f595f2b25882eed9bec1675fb1 upstream. The rcv window is shared among all the subflows. Currently, MPTCP sync the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time. The above means that incoming data may sporadically observe outdated TCP-level rcv window and being wrongly dropped by TCP. Address the issue checking for the edge condition before queuing the data at TCP level, and eventually syncing the rcv window as needed. Note that the issue is actually present from the very first MPTCP implementation, but backports older than the blamed commit below will range from impossible to useless. Before: $ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow TcpExtBeyondWindow 14 0.0 After: $ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow TcpExtBeyondWindow 0 0.0 Fixes: fa3fe2b15031 ("mptcp: track window announced to peer") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1f588398aece1fa6c5c01657f744ffcb86013922 Author: Matthieu Baerts (NGI0) Date: Tue Nov 18 08:20:27 2025 +0100 selftests: mptcp: join: userspace: longer timeout commit 0e4ec14dc1ee4b1ec347729c225c3ca950f2bcf6 upstream. In rare cases, when the test environment is very slow, some userspace tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to have a longer timeout, and even go over the default one. This connection will be killed at the end, after the verifications: increasing the timeout doesn't change anything, apart from avoiding it to end before the end of the verifications. To play it safe, all userspace tests not waiting for the end of the transfer are now having a longer timeout: 2 minutes. The Fixes commit was making the connection longer, but still, the default timeout would have stopped it after 1 minute, which might not be enough in very slow environments. Fixes: 290493078b96 ("selftests: mptcp: join: userspace: longer transfer") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) Reviewed-by: Geliang Tang Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e44c5f4e039ae67c9965fe5d81d4cf0f7ea6af44 Author: Matthieu Baerts (NGI0) Date: Tue Nov 18 08:20:26 2025 +0100 selftests: mptcp: join: endpoints: longer timeout commit fb13c6bb810ca871964e062cf91882d1c83db509 upstream. In rare cases, when the test environment is very slow, some endpoints tests can fail because some expected events have not been seen. Because the tests are expecting a long on-going connection, and they are not waiting for the end of the transfer, it is fine to have a longer timeout, and even go over the default one. This connection will be killed at the end, after the verifications: increasing the timeout doesn't change anything, apart from avoiding it to end before the end of the verifications. To play it safe, all endpoints tests not waiting for the end of the transfer are now having a longer timeout: 2 minutes. The Fixes commit was making the connection longer, but still, the default timeout would have stopped it after 1 minute, which might not be enough in very slow environments. Fixes: 6457595db987 ("selftests: mptcp: join: endpoints: longer transfer") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) Reviewed-by: Geliang Tang Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 29e7f196584511f92276a5f5cb5cbfb584a1bfe7 Author: Paolo Abeni Date: Tue Nov 18 08:20:21 2025 +0100 mptcp: fix premature close in case of fallback commit 17393fa7b7086664be519e7230cb6ed7ec7d9462 upstream. I'm observing very frequent self-tests failures in case of fallback when running on a CONFIG_PREEMPT kernel. The root cause is that subflow_sched_work_if_closed() closes any subflow as soon as it is half-closed and has no incoming data pending. That works well for regular subflows - MPTCP needs bi-directional connectivity to operate on a given subflow - but for fallback socket is race prone. When TCP peer closes the connection before the MPTCP one, subflow_sched_work_if_closed() will schedule the MPTCP worker to gracefully close the subflow, and shortly after will do another schedule to inject and process a dummy incoming DATA_FIN. On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the fallback subflow before subflow_sched_work_if_closed() is able to create the dummy DATA_FIN, unexpectedly interrupting the transfer. Address the issue explicitly avoiding closing fallback subflows on when the peer is only half-closed. Note that, when the subflow is able to create the DATA_FIN before the worker invocation, the worker will change the msk state before trying to close the subflow and will skip the latter operation as the msk will not match anymore the precondition in __mptcp_close_subflow(). Fixes: f09b0ad55a11 ("mptcp: close subflow when receiving TCP+FIN") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c4f7b0916b95fd2226e5ab98882482b08f52e1c0 Author: Paolo Abeni Date: Tue Nov 18 08:20:24 2025 +0100 mptcp: fix duplicate reset on fastclose commit ae155060247be8dcae3802a95bd1bdf93ab3215d upstream. The CI reports sporadic failures of the fastclose self-tests. The root cause is a duplicate reset, not carrying the relevant MPTCP option. In the failing scenario the bad reset is received by the peer before the fastclose one, preventing the reception of the latter. Indeed there is window of opportunity at fastclose time for the following race: mptcp_do_fastclose __mptcp_close_ssk __tcp_close() tcp_set_state() [1] tcp_send_active_reset() [2] After [1] the stack will send reset to in-flight data reaching the now closed port. Such reset may race with [2]. Address the issue explicitly sending a single reset on fastclose before explicitly moving the subflow to close status. Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/596 Signed-off-by: Paolo Abeni Reviewed-by: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-6-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 0b7161eaecd7a6e12820acc703a883be47c798d3 Author: Paolo Abeni Date: Tue Nov 18 08:20:19 2025 +0100 mptcp: fix ack generation for fallback msk commit 5e15395f6d9ec07395866c5511f4b4ac566c0c9b upstream. mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level rcv_wnd sent, and such information is tracked into the msk->old_wspace field, updated at ack transmission time by mptcp_write_options(). Fallback socket do not add any mptcp options, such helper is never invoked, and msk->old_wspace value remain stale. That in turn makes ack generation at recvmsg() time quite random. Address the issue ensuring mptcp_write_options() is invoked even for fallback sockets, and just update the needed info in such a case. The issue went unnoticed for a long time, as mptcp currently overshots the fallback socket receive buffer autotune significantly. It is going to change in the near future. Fixes: e3859603ba13 ("mptcp: better msk receive window updates") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594 Signed-off-by: Paolo Abeni Reviewed-by: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit bbbd75346c8e6490b19c2ba90f38ea66ccf352b2 Author: Eric Dumazet Date: Mon Nov 17 10:07:44 2025 +0000 mptcp: fix a race in mptcp_pm_del_add_timer() commit 426358d9be7ce3518966422f87b96f1bad27295f upstream. mptcp_pm_del_add_timer() can call sk_stop_timer_sync(sk, &entry->add_timer) while another might have free entry already, as reported by syzbot. Add RCU protection to fix this issue. Also change confusing add_timer variable with stop_timer boolean. syzbot report: BUG: KASAN: slab-use-after-free in __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 Read of size 4 at addr ffff8880311e4150 by task kworker/1:1/44 CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025 Workqueue: events mptcp_worker Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __timer_delete_sync+0x372/0x3f0 kernel/time/timer.c:1616 sk_stop_timer_sync+0x1b/0x90 net/core/sock.c:3631 mptcp_pm_del_add_timer+0x283/0x310 net/mptcp/pm.c:362 mptcp_incoming_options+0x1357/0x1f60 net/mptcp/options.c:1174 tcp_data_queue+0xca/0x6450 net/ipv4/tcp_input.c:5361 tcp_rcv_established+0x1335/0x2670 net/ipv4/tcp_input.c:6441 tcp_v4_do_rcv+0x98b/0xbf0 net/ipv4/tcp_ipv4.c:1931 tcp_v4_rcv+0x252a/0x2dc0 net/ipv4/tcp_ipv4.c:2374 ip_protocol_deliver_rcu+0x221/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:239 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6079 [inline] __netif_receive_skb+0x143/0x380 net/core/dev.c:6192 process_backlog+0x31e/0x900 net/core/dev.c:6544 __napi_poll+0xb6/0x540 net/core/dev.c:7594 napi_poll net/core/dev.c:7657 [inline] net_rx_action+0x5f7/0xda0 net/core/dev.c:7784 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] __local_bh_enable_ip+0x1a0/0x2e0 kernel/softirq.c:302 mptcp_pm_send_ack net/mptcp/pm.c:210 [inline] mptcp_pm_addr_send_ack+0x41f/0x500 net/mptcp/pm.c:-1 mptcp_pm_worker+0x174/0x320 net/mptcp/pm.c:1002 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Allocated by task 44: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 poison_kmalloc_redzone mm/kasan/common.c:400 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:417 kasan_kmalloc include/linux/kasan.h:262 [inline] __kmalloc_cache_noprof+0x1ef/0x6c0 mm/slub.c:5748 kmalloc_noprof include/linux/slab.h:957 [inline] mptcp_pm_alloc_anno_list+0x104/0x460 net/mptcp/pm.c:385 mptcp_pm_create_subflow_or_signal_addr+0xf9d/0x1360 net/mptcp/pm_kernel.c:355 mptcp_pm_nl_fully_established net/mptcp/pm_kernel.c:409 [inline] __mptcp_pm_kernel_worker+0x417/0x1ef0 net/mptcp/pm_kernel.c:1529 mptcp_pm_worker+0x1ee/0x320 net/mptcp/pm.c:1008 mptcp_worker+0xd5/0x1170 net/mptcp/protocol.c:2762 process_one_work kernel/workqueue.c:3263 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3346 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3427 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Freed by task 6630: kasan_save_stack mm/kasan/common.c:56 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:77 __kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:587 kasan_save_free_info mm/kasan/kasan.h:406 [inline] poison_slab_object mm/kasan/common.c:252 [inline] __kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284 kasan_slab_free include/linux/kasan.h:234 [inline] slab_free_hook mm/slub.c:2523 [inline] slab_free mm/slub.c:6611 [inline] kfree+0x197/0x950 mm/slub.c:6818 mptcp_remove_anno_list_by_saddr+0x2d/0x40 net/mptcp/pm.c:158 mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_kernel.c:1209 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_kernel.c:1240 [inline] mptcp_pm_nl_flush_addrs_doit+0x593/0xbb0 net/mptcp/pm_kernel.c:1281 genl_family_rcv_msg_doit+0x215/0x300 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x60e/0x790 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x846/0xa10 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 ____sys_sendmsg+0x508/0x820 net/socket.c:2630 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2684 __sys_sendmsg net/socket.c:2716 [inline] __do_sys_sendmsg net/socket.c:2721 [inline] __se_sys_sendmsg net/socket.c:2719 [inline] __x64_sys_sendmsg+0x1a1/0x260 net/socket.c:2719 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Cc: stable@vger.kernel.org Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Reported-by: syzbot+2a6fbf0f0530375968df@syzkaller.appspotmail.com Closes: https://lore.kernel.org/691ad3c3.a70a0220.f6df1.0004.GAE@google.com Signed-off-by: Eric Dumazet Cc: Geliang Tang Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251117100745.1913963-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3fc7723ed01d1130d4bf7063c50e0af60ecccbb4 Author: Eric Dumazet Date: Thu Nov 13 10:39:24 2025 +0000 mptcp: fix race condition in mptcp_schedule_work() commit 035bca3f017ee9dea3a5a756e77a6f7138cc6eea upstream. syzbot reported use-after-free in mptcp_schedule_work() [1] Issue here is that mptcp_schedule_work() schedules a work, then gets a refcount on sk->sk_refcnt if the work was scheduled. This refcount will be released by mptcp_worker(). [A] if (schedule_work(...)) { [B] sock_hold(sk); return true; } Problem is that mptcp_worker() can run immediately and complete before [B] We need instead : sock_hold(sk); if (schedule_work(...)) return true; sock_put(sk); [1] refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 29 at lib/refcount.c:25 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:25 Call Trace: __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] sock_hold include/net/sock.h:816 [inline] mptcp_schedule_work+0x164/0x1a0 net/mptcp/protocol.c:943 mptcp_tout_timer+0x21/0xa0 net/mptcp/protocol.c:2316 call_timer_fn+0x17e/0x5f0 kernel/time/timer.c:1747 expire_timers kernel/time/timer.c:1798 [inline] __run_timers kernel/time/timer.c:2372 [inline] __run_timer_base+0x648/0x970 kernel/time/timer.c:2384 run_timer_base kernel/time/timer.c:2393 [inline] run_timer_softirq+0xb7/0x180 kernel/time/timer.c:2403 handle_softirqs+0x22f/0x710 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0xcf/0x190 kernel/softirq.c:1138 smpboot_thread_fn+0x542/0xa60 kernel/smpboot.c:160 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x4bc/0x870 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 Cc: stable@vger.kernel.org Fixes: 3b1d6210a957 ("mptcp: implement and use MPTCP-level retransmission") Reported-by: syzbot+355158e7e301548a1424@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6915b46f.050a0220.3565dc.0028.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20251113103924.3737425-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 424f5097f2e0364132ff4e73a8047cd387608b45 Author: Anthony Wong Date: Mon Nov 17 02:53:11 2025 +0800 platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora commit 6f91ad24c6639220f2edb0ad8edb199b43cc3b22 upstream. Add AWCC support to Alienware 16 Aurora Cc: stable@vger.kernel.org Signed-off-by: Anthony Wong Reviewed-by: Kurt Borja Link: https://patch.msgid.link/20251116185311.18074-1-anthony.wong@canonical.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman commit e83e877bd3d15b2ceae503e4a4dbb7559a9d7a84 Author: Kurt Borja Date: Mon Nov 3 14:01:48 2025 -0500 platform/x86: alienware-wmi-wmax: Add support for the whole "G" family commit a6003d90f02863898babbcb3f55b1cd33f7867c2 upstream. Add support for the whole "Dell G" laptop family. Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja Link: https://patch.msgid.link/20251103-family-supp-v1-5-a241075d1787@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman commit cfcb35ee0d4d7268ec029d0d2a6df9c3888507b0 Author: Kurt Borja Date: Mon Nov 3 14:01:47 2025 -0500 platform/x86: alienware-wmi-wmax: Add support for the whole "X" family commit 21ebfff1cf4727bc325c89b94ed93741f870744f upstream. Add support for the whole "Alienware X" laptop family. Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja Link: https://patch.msgid.link/20251103-family-supp-v1-4-a241075d1787@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman commit 359e196aee83d26c9745a639e5553160a61f9890 Author: Kurt Borja Date: Mon Nov 3 14:01:46 2025 -0500 platform/x86: alienware-wmi-wmax: Add support for the whole "M" family commit e8c3c875e1017c04c594f0e6127ba82095b1cb87 upstream. Add support for the whole "Alienware M" laptop family. Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja Link: https://patch.msgid.link/20251103-family-supp-v1-3-a241075d1787@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman commit 8bb12e8f05877dd4c46445d86564c8bd7e10e959 Author: Kurt Borja Date: Mon Nov 3 14:01:44 2025 -0500 platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order commit bd4f9f113dda07293ed4002a17d14f62121d324f upstream. Quirks are matched using dmi_first_match(), therefore move the "Alienware m16 R1 AMD" entry above other m16 entries. Reported-by: Cihan Ozakca Fixes: e2468dc70074 ("Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1"") Cc: stable@vger.kernel.org Signed-off-by: Kurt Borja Link: https://patch.msgid.link/20251103-family-supp-v1-1-a241075d1787@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman commit 95aa37aee4c07913b0bb415bde75cebab3d7cf58 Author: Bibo Mao Date: Thu Nov 20 14:42:05 2025 +0800 LoongArch: Fix NUMA node parsing with numa_memblks commit acf5de1b23b0275eb69f235c8e9f2cef19fa39a1 upstream. On physical machine, NUMA node id comes from high bit 44:48 of physical address. However it is not true on virt machine. With general method, it comes from ACPI SRAT table. Here the common function numa_memblks_init() is used to parse NUMA node information with numa_memblks. Cc: Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 7e7b4fff05cd5e0769e26a6c9c649827ac9771f8 Author: Huacai Chen Date: Thu Nov 20 14:42:05 2025 +0800 LoongArch: Don't panic if no valid cache info for PCI commit a6b533adfc05ba15360631e019d3e18275080275 upstream. If there is no valid cache info detected (may happen in virtual machine) for pci_dfl_cache_line_size, kernel shouldn't panic. Because in the PCI core it will be evaluated to (L1_CACHE_BYTES >> 2). Cc: Signed-off-by: Jiaxun Yang Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 44eb3849378be5f72b8be03edbacbdcd6f5eade4 Author: Vincent Li Date: Thu Nov 20 14:42:05 2025 +0800 LoongArch: BPF: Disable trampoline for kernel module function trace commit 677e6123e3d24adaa252697dc89740f2ac07664e upstream. The current LoongArch BPF trampoline implementation is incompatible with tracing functions in kernel modules. This causes several severe and user-visible problems: * The `bpf_selftests/module_attach` test fails consistently. * Kernel lockup when a BPF program is attached to a module function [1]. * Critical kernel modules like WireGuard experience traffic disruption when their functions are traced with fentry [2]. Given the severity and the potential for other unknown side-effects, it is safest to disable the feature entirely for now. This patch prevents the BPF subsystem from allowing trampoline attachments to kernel module functions on LoongArch. This is a temporary mitigation until the core issues in the trampoline code for kernel module handling can be identified and fixed. [root@fedora bpf]# ./test_progs -a module_attach -v bpf_testmod.ko is already unloaded. Loading bpf_testmod.ko... Successfully loaded bpf_testmod.ko. test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: -ENOTSUPP libbpf: prog 'handle_fentry': failed to auto-attach: -ENOTSUPP test_module_attach:FAIL:skel_attach skeleton attach failed: -524 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Successfully unloaded bpf_testmod.ko. [1]: https://lore.kernel.org/loongarch/CAK3+h2wDmpC-hP4u4pJY8T-yfKyk4yRzpu2LMO+C13FMT58oqQ@mail.gmail.com/ [2]: https://lore.kernel.org/loongarch/CAK3+h2wYcpc+OwdLDUBvg2rF9rvvyc5amfHT-KcFaK93uoELPg@mail.gmail.com/ Cc: stable@vger.kernel.org Fixes: f9b6b41f0cf3 ("LoongArch: BPF: Add basic bpf trampoline support") Acked-by: Hengqi Chen Signed-off-by: Vincent Li Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 64f2162d29307aabb7f951abfaf624dc192ed1e9 Author: Krzysztof Kozlowski Date: Wed Oct 22 15:34:26 2025 +0200 dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups commit 316e361b5d2cdeb8d778983794a1c6eadcb26814 upstream. The "groups" property can hold multiple entries (e.g. toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect type (pinmux-node.yaml schema already defines that as string-array) and adding constraints for items. This fixes dtbs_check warnings like: toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl): pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long Fixes: 1825c1fe0057 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Acked-by: Conor Dooley Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman commit f4ebce622e14e629b729004dd4d41c5c2d5f6a79 Author: Maciej W. Rozycki Date: Mon Oct 20 02:11:49 2025 +0100 MIPS: Malta: Fix !EVA SOC-it PCI MMIO commit ebd729fef31620e0bf74cbf8a4c7fda73a2a4e7e upstream. Fix a regression that has caused accesses to the PCI MMIO window to complete unclaimed in non-EVA configurations with the SOC-it family of system controllers, preventing PCI devices from working that use MMIO. In the non-EVA case PHYS_OFFSET is set to 0, meaning that PCI_BAR0 is set with an empty mask (and PCI_HEAD4 matches addresses starting from 0 accordingly). Consequently all addresses are matched for incoming DMA accesses from PCI. This seems to confuse the system controller's logic and outgoing bus cycles targeting the PCI MMIO window seem not to make it to the intended devices. This happens as well when a wider mask is used with PCI_BAR0, such as 0x80000000 or 0xe0000000, that makes addresses match that overlap with the PCI MMIO window, which starts at 0x10000000 in our configuration. Set the mask in PCI_BAR0 to 0xf0000000 for non-EVA then, covering the non-EVA maximum 256 MiB of RAM, which is what YAMON does and which used to work correctly up to the offending commit. Set PCI_P2SCMSKL to match PCI_BAR0 as required by the system controller's specification, and match PCI_P2SCMAPL to PCI_HEAD4 for identity mapping. Verified with: Core board type/revision = 0x0d (Core74K) / 0x01 System controller/revision = MIPS SOC-it 101 OCP / 1.3 SDR-FW-4:1 Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x1c Processor ID/revision = 0x97 (MIPS 74Kf) / 0x4c for non-EVA and with: Core board type/revision = 0x0c (CoreFPGA-5) / 0x00 System controller/revision = MIPS ROC-it2 / 0.0 FW-1:1 (CLK_unknown) GIC Processor Company ID/options = 0x01 (MIPS Technologies, Inc.) / 0x00 Processor ID/revision = 0xa0 (MIPS interAptiv UP) / 0x20 for EVA/non-EVA, fixing: defxx 0000:00:12.0: assign IRQ: got 10 defxx: v1.12 2021/03/10 Lawrence V. Stefani and others 0000:00:12.0: Could not read adapter factory MAC address! vs: defxx 0000:00:12.0: assign IRQ: got 10 defxx: v1.12 2021/03/10 Lawrence V. Stefani and others 0000:00:12.0: DEFPA at MMIO addr = 0x10142000, IRQ = 10, Hardware addr = 00-00-f8-xx-xx-xx 0000:00:12.0: registered as fddi0 for non-EVA and causing no change for EVA. Signed-off-by: Maciej W. Rozycki Fixes: 422dd256642b ("MIPS: Malta: Allow PCI devices DMA to lower 2GB physical") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 13aff3b8a7184281b134698704d6c06863a8361b Author: Hamza Mahfooz Date: Wed Nov 5 11:25:46 2025 -0800 scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() commit e6965188f84a7883e6a0d3448e86b0cf29b24dfc upstream. If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... Cc: stable@vger.kernel.org Fixes: 2628b352c3d4 ("tcm_loop: Show address of tpg in configfs") Signed-off-by: Hamza Mahfooz Reviewed-by: Chaitanya Kulkarni Reviewed-by: Allen Pais Link: https://patch.msgid.link/1762370746-6304-1-git-send-email-hamzamahfooz@linux.microsoft.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 6983d8375c040bb449d2187f4a57a20de01244fe Author: Bart Van Assche Date: Thu Nov 13 10:16:43 2025 -0800 scsi: sg: Do not sleep in atomic context commit 90449f2d1e1f020835cba5417234636937dd657e upstream. sg_finish_rem_req() calls blk_rq_unmap_user(). The latter function may sleep. Hence, call sg_finish_rem_req() with interrupts enabled instead of disabled. Reported-by: syzbot+c01f8e6e73f20459912e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-scsi/691560c4.a70a0220.3124cb.001a.GAE@google.com/ Cc: Hannes Reinecke Cc: stable@vger.kernel.org Fixes: 97d27b0dd015 ("scsi: sg: close race condition in sg_remove_sfp_usercontext()") Signed-off-by: Bart Van Assche Link: https://patch.msgid.link/20251113181643.1108973-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 625e173e2a59b6cf6cbfb51c0a6bea47f3861eab Author: Saket Kumar Bhaskar Date: Wed Nov 19 16:07:22 2025 +0530 sched_ext: Fix scx_enable() crash on helper kthread creation failure commit 7b6216baae751369195fa3c83d434d23bcda406a upstream. A crash was observed when the sched_ext selftests runner was terminated with Ctrl+\ while test 15 was running: NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0 LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0 Call Trace: scx_enable.constprop.0+0x32c/0x12b0 (unreliable) bpf_struct_ops_link_create+0x18c/0x22c __sys_bpf+0x23f8/0x3044 sys_bpf+0x2c/0x6c system_call_exception+0x124/0x320 system_call_vectored_common+0x15c/0x2ec kthread_run_worker() returns an ERR_PTR() on failure rather than NULL, but the current code in scx_alloc_and_add_sched() only checks for a NULL helper. Incase of failure on SIGQUIT, the error is not handled in scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an error pointer. Error handling is fixed in scx_alloc_and_add_sched() to propagate PTR_ERR() into ret, so that scx_enable() jumps to the existing error path, avoiding random dereference on failure. Fixes: bff3b5aec1b7 ("sched_ext: Move disable machinery into scx_sched") Cc: stable@vger.kernel.org # v6.16+ Reported-and-tested-by: Samir Mulani Signed-off-by: Saket Kumar Bhaskar Reviewed-by: Emil Tsalapatis Reviewed-by: Andrea Righi Reviewed-by: Vishal Chourasia Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 3bb37d29e01d523cdbadda4c208705cfe2c61893 Author: Rafael J. Wysocki Date: Tue Nov 18 15:16:04 2025 +0100 PM: sleep: core: Fix runtime PM enabling in device_resume_early() commit f384497a76ed9539f70f6e8fe81a193441c943d2 upstream. Runtime PM should only be enabled in device_resume_early() if it has been disabled for the given device by device_suspend_late(). Otherwise, it may cause runtime PM callbacks to run prematurely in some cases which leads to further functional issues. Make two changes to address this problem. First, reorder device_suspend_late() to only disable runtime PM for a device when it is going to look for the device's callback or if the device is a "syscore" one. In all of the other cases, disabling runtime PM for the device is not in fact necessary. However, if the device's callback returns an error and the power.is_late_suspended flag is not going to be set, enable runtime PM so it only remains disabled when power.is_late_suspended is set. Second, make device_resume_early() only enable runtime PM for the devices with the power.is_late_suspended flag set. Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous") Reported-by: Rose Wu Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/ Cc: 6.16+ # 6.16+ Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman commit fbd5741a556eaaa63d0908132ca79d335b58b1cd Author: Ewan D. Milne Date: Mon Nov 10 16:20:01 2025 -0500 nvme: nvme-fc: Ensure ->ioerr_work is cancelled in nvme_fc_delete_ctrl() commit 0a2c5495b6d1ecb0fa18ef6631450f391a888256 upstream. nvme_fc_delete_assocation() waits for pending I/O to complete before returning, and an error can cause ->ioerr_work to be queued after cancel_work_sync() had been called. Move the call to cancel_work_sync() to be after nvme_fc_delete_association() to ensure ->ioerr_work is not running when the nvme_fc_ctrl object is freed. Otherwise the following can occur: [ 1135.911754] list_del corruption, ff2d24c8093f31f8->next is NULL [ 1135.917705] ------------[ cut here ]------------ [ 1135.922336] kernel BUG at lib/list_debug.c:52! [ 1135.926784] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 1135.931851] CPU: 48 UID: 0 PID: 726 Comm: kworker/u449:23 Kdump: loaded Not tainted 6.12.0 #1 PREEMPT(voluntary) [ 1135.943490] Hardware name: Dell Inc. PowerEdge R660/0HGTK9, BIOS 2.5.4 01/16/2025 [ 1135.950969] Workqueue: 0x0 (nvme-wq) [ 1135.954673] RIP: 0010:__list_del_entry_valid_or_report.cold+0xf/0x6f [ 1135.961041] Code: c7 c7 98 68 72 94 e8 26 45 fe ff 0f 0b 48 c7 c7 70 68 72 94 e8 18 45 fe ff 0f 0b 48 89 fe 48 c7 c7 80 69 72 94 e8 07 45 fe ff <0f> 0b 48 89 d1 48 c7 c7 a0 6a 72 94 48 89 c2 e8 f3 44 fe ff 0f 0b [ 1135.979788] RSP: 0018:ff579b19482d3e50 EFLAGS: 00010046 [ 1135.985015] RAX: 0000000000000033 RBX: ff2d24c8093f31f0 RCX: 0000000000000000 [ 1135.992148] RDX: 0000000000000000 RSI: ff2d24d6bfa1d0c0 RDI: ff2d24d6bfa1d0c0 [ 1135.999278] RBP: ff2d24c8093f31f8 R08: 0000000000000000 R09: ffffffff951e2b08 [ 1136.006413] R10: ffffffff95122ac8 R11: 0000000000000003 R12: ff2d24c78697c100 [ 1136.013546] R13: fffffffffffffff8 R14: 0000000000000000 R15: ff2d24c78697c0c0 [ 1136.020677] FS: 0000000000000000(0000) GS:ff2d24d6bfa00000(0000) knlGS:0000000000000000 [ 1136.028765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1136.034510] CR2: 00007fd207f90b80 CR3: 000000163ea22003 CR4: 0000000000f73ef0 [ 1136.041641] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1136.048776] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1136.055910] PKRU: 55555554 [ 1136.058623] Call Trace: [ 1136.061074] [ 1136.063179] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.067540] ? show_trace_log_lvl+0x1b0/0x2f0 [ 1136.071898] ? move_linked_works+0x4a/0xa0 [ 1136.075998] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.081744] ? __die_body.cold+0x8/0x12 [ 1136.085584] ? die+0x2e/0x50 [ 1136.088469] ? do_trap+0xca/0x110 [ 1136.091789] ? do_error_trap+0x65/0x80 [ 1136.095543] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.101289] ? exc_invalid_op+0x50/0x70 [ 1136.105127] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.110874] ? asm_exc_invalid_op+0x1a/0x20 [ 1136.115059] ? __list_del_entry_valid_or_report.cold+0xf/0x6f [ 1136.120806] move_linked_works+0x4a/0xa0 [ 1136.124733] worker_thread+0x216/0x3a0 [ 1136.128485] ? __pfx_worker_thread+0x10/0x10 [ 1136.132758] kthread+0xfa/0x240 [ 1136.135904] ? __pfx_kthread+0x10/0x10 [ 1136.139657] ret_from_fork+0x31/0x50 [ 1136.143236] ? __pfx_kthread+0x10/0x10 [ 1136.146988] ret_from_fork_asm+0x1a/0x30 [ 1136.150915] Fixes: 19fce0470f05 ("nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context") Cc: stable@vger.kernel.org Tested-by: Marco Patalano Reviewed-by: Justin Tee Signed-off-by: Ewan D. Milne Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 0d1840b2dd8fe073c020c39bf8e8e89488070801 Author: Ewan D. Milne Date: Mon Nov 10 16:20:00 2025 -0500 nvme: nvme-fc: move tagset removal to nvme_fc_delete_ctrl() commit ea3442efabd0aa3930c5bab73c3901ef38ef6ac3 upstream. Now target is removed from nvme_fc_ctrl_free() which is the ctrl->ref release handler. And even admin queue is unquiesced there, this way is definitely wrong because the ctr->ref is grabbed when submitting command. And Marco observed that nvme_fc_ctrl_free() can be called from request completion code path, and trigger kernel warning since request completes from softirq context. Fix the issue by moveing target removal into nvme_fc_delete_ctrl(), which is also aligned with nvme-tcp and nvme-rdma. Patch originally proposed by Ming Lei, then modified to move the tagset removal down to after nvme_fc_delete_association() after further testing. Cc: Marco Patalano Cc: Ewan Milne Cc: James Smart Cc: Sagi Grimberg Signed-off-by: Ming Lei Cc: stable@vger.kernel.org Tested-by: Marco Patalano Reviewed-by: Justin Tee Signed-off-by: Ewan D. Milne Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 2bba02a39bfb383bd1a95868d532c0917e38f9e7 Author: Nam Cao Date: Mon Nov 17 08:42:31 2025 +0000 nouveau/firmware: Add missing kfree() of nvkm_falcon_fw::boot commit 949f1fd2225baefbea2995afa807dba5cbdb6bd3 upstream. nvkm_falcon_fw::boot is allocated, but no one frees it. This causes a kmemleak warning. Make sure this data is deallocated. Fixes: 2541626cfb79 ("drm/nouveau/acr: use common falcon HS FW code for ACR FWs") Signed-off-by: Nam Cao Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patch.msgid.link/20251117084231.2910561-1-namcao@linutronix.de Signed-off-by: Greg Kroah-Hartman commit a79e49e1704367b635edad1479db23d7cf1fb71a Author: Vlastimil Babka Date: Thu Nov 13 19:54:35 2025 +0100 mm/mempool: fix poisoning order>0 pages with HIGHMEM commit ec33b59542d96830e3c89845ff833cf7b25ef172 upstream. The kernel test has reported: BUG: unable to handle page fault for address: fffba000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 03171067 *pte = 00000000 Oops: Oops: 0002 [#1] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: G T 6.18.0-rc2-00031-gec7f31b2a2d3 #1 NONE a1d066dfe789f54bc7645c7989957d2bdee593ca Tainted: [T]=RANDSTRUCT Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 EIP: memset (arch/x86/include/asm/string_32.h:168 arch/x86/lib/memcpy_32.c:17) Code: a5 8b 4d f4 83 e1 03 74 02 f3 a4 83 c4 04 5e 5f 5d 2e e9 73 41 01 00 90 90 90 3e 8d 74 26 00 55 89 e5 57 56 89 c6 89 d0 89 f7 aa 89 f0 5e 5f 5d 2e e9 53 41 01 00 cc cc cc 55 89 e5 53 57 56 EAX: 0000006b EBX: 00000015 ECX: 001fefff EDX: 0000006b ESI: fffb9000 EDI: fffba000 EBP: c611fbf0 ESP: c611fbe8 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010287 CR0: 80050033 CR2: fffba000 CR3: 0316e000 CR4: 00040690 Call Trace: poison_element (mm/mempool.c:83 mm/mempool.c:102) mempool_init_node (mm/mempool.c:142 mm/mempool.c:226) mempool_init_noprof (mm/mempool.c:250 (discriminator 1)) ? mempool_alloc_pages (mm/mempool.c:640) bio_integrity_initfn (block/bio-integrity.c:483 (discriminator 8)) ? mempool_alloc_pages (mm/mempool.c:640) do_one_initcall (init/main.c:1283) Christoph found out this is due to the poisoning code not dealing properly with CONFIG_HIGHMEM because only the first page is mapped but then the whole potentially high-order page is accessed. We could give up on HIGHMEM here, but it's straightforward to fix this with a loop that's mapping, poisoning or checking and unmapping individual pages. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202511111411.9ebfa1ba-lkp@intel.com Analyzed-by: Christoph Hellwig Fixes: bdfedb76f4f5 ("mm, mempool: poison elements backed by slab allocator") Cc: stable@vger.kernel.org Tested-by: kernel test robot Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20251113-mempool-poison-v1-1-233b3ef984c3@suse.cz Signed-off-by: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman commit 763c3f4d2394a697d14af1335d3bb42f05c9409f Author: Seungjin Bae Date: Fri Oct 17 15:36:31 2025 -0700 Input: pegasus-notetaker - fix potential out-of-bounds access commit 69aeb507312306f73495598a055293fa749d454e upstream. In the pegasus_notetaker driver, the pegasus_probe() function allocates the URB transfer buffer using the wMaxPacketSize value from the endpoint descriptor. An attacker can use a malicious USB descriptor to force the allocation of a very small buffer. Subsequently, if the device sends an interrupt packet with a specific pattern (e.g., where the first byte is 0x80 or 0x42), the pegasus_parse_packet() function parses the packet without checking the allocated buffer size. This leads to an out-of-bounds memory access. Fixes: 1afca2b66aac ("Input: add Pegasus Notetaker tablet driver") Signed-off-by: Seungjin Bae Link: https://lore.kernel.org/r/20251007214131.3737115-2-eeodqql09@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 6524a15d33951b18ac408ebbcb9c16e14e21c336 Author: Dan Carpenter Date: Sat Nov 1 16:25:27 2025 +0300 Input: imx_sc_key - fix memory corruption on unload commit d83f1512758f4ef6fc5e83219fe7eeeb6b428ea4 upstream. This is supposed to be "priv" but we accidentally pass "&priv" which is an address in the stack and so it will lead to memory corruption when the imx_sc_key_action() function is called. Remove the &. Fixes: 768062fd1284 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups") Signed-off-by: Dan Carpenter Reviewed-by: Peng Fan Reviewed-by: Frank Li Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 6a88d05de5fef7619218a0080a03c114c8f11a84 Author: Hans de Goede Date: Mon Oct 13 09:15:25 2025 -0700 Input: goodix - add support for ACPI ID GDIX1003 commit c6d99e488117201c63efd747ce17b80687c3f5a9 upstream. Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003 to the goodix_acpi_match[] table. Reported-by: Weikang Guo Closes: https://lore.kernel.org/linux-input/20250225024409.1467040-1-guoweikang.kernel@gmail.com/ Tested-by: Weikang Guo Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20251013121022.44333-1-hansg@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 2d251c15c27e2dd16d6318425d2f7260cbd47d39 Author: Tzung-Bi Shih Date: Tue Nov 4 07:03:10 2025 +0000 Input: cros_ec_keyb - fix an invalid memory access commit e08969c4d65ac31297fcb4d31d4808c789152f68 upstream. If cros_ec_keyb_register_matrix() isn't called (due to `buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains NULL. An invalid memory access is observed in cros_ec_keyb_process() when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work() in such case. Unable to handle kernel read from unreadable memory at virtual address 0000000000000028 ... x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: input_event cros_ec_keyb_work blocking_notifier_call_chain ec_irq_thread It's still unknown about why the kernel receives such malformed event, in any cases, the kernel shouldn't access `ckdev->idev` and friends if the driver doesn't intend to initialize them. Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 7a41d0e5f3050a574919b9bf6ed863b90f7c66d4 Author: Diogo Ivo Date: Mon Nov 3 14:14:15 2025 +0000 Revert "drm/tegra: dsi: Clear enable register if powered by bootloader" commit 660b299bed2a2a55a1f9102d029549d0235f881c upstream. Commit b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state") was introduced so that all power domains get initialized to a known working state when booting and it does this by shutting them down (including asserting resets and disabling clocks) before registering each power domain with the genpd framework, leaving it to each driver to later on power its needed domains. This caused the Google Pixel C to hang when booting due to a workaround in the DSI driver introduced in commit b22fd0b9639e ("drm/tegra: dsi: Clear enable register if powered by bootloader") meant to handle the case where the bootloader enabled the DSI hardware module. The workaround relies on reading a hardware register to determine the current status and after b6bcbce33596 that now happens in a powered down state thus leading to the boot hang. Fix this by reverting b22fd0b9639e since currently we are guaranteed that the hardware will be fully reset by the time we start enabling the DSI module. Fixes: b6bcbce33596 ("soc/tegra: pmc: Ensure power-domains are in a known state") Cc: stable@vger.kernel.org Signed-off-by: Diogo Ivo Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20251103-diogo-smaug_ec_typec-v1-1-be656ccda391@tecnico.ulisboa.pt Signed-off-by: Greg Kroah-Hartman commit aeee1f146f090ae3d4c639e0ad8fcfa170e25a5f Author: Oleksij Rempel Date: Fri Nov 14 10:09:51 2025 +0100 net: dsa: microchip: lan937x: Fix RGMII delay tuning commit 3ceb6ac2116ecda1c5d779bb73271479e70fccb4 upstream. Correct RGMII delay application logic in lan937x_set_tune_adj(). The function was missing `data16 &= ~PORT_TUNE_ADJ` before setting the new delay value. This caused the new value to be bitwise-OR'd with the existing PORT_TUNE_ADJ field instead of replacing it. For example, when setting the RGMII 2 TX delay on port 4, the intended TUNE_ADJUST value of 0 (RGMII_2_TX_DELAY_2NS) was incorrectly OR'd with the default 0x1B (from register value 0xDA3), leaving the delay at the wrong setting. This patch adds the missing mask to clear the field, ensuring the correct delay value is written. Physical measurements on the RGMII TX lines confirm the fix, showing the delay changing from ~1ns (before change) to ~2ns. While testing on i.MX 8MP showed this was within the platform's timing tolerance, it did not match the intended hardware-characterized value. Fixes: b19ac41faa3f ("net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel Link: https://patch.msgid.link/20251114090951.4057261-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit c85d2cfc5e24e6866b56c7253fd4e1c7db35986c Author: Jens Axboe Date: Thu Nov 20 11:40:15 2025 -0700 io_uring/cmd_net: fix wrong argument types for skb_queue_splice() commit 46447367a52965e9d35f112f5b26fc8ff8ec443d upstream. If timestamp retriving needs to be retried and the local list of SKB's already has entries, then it's spliced back into the socket queue. However, the arguments for the splice helper are transposed, causing exactly the wrong direction of splicing into the on-stack list. Fix that up. Cc: stable@vger.kernel.org Reported-by: Google Big Sleep Fixes: 9e4ed359b8ef ("io_uring/netcmd: add tx timestamping cmd support") Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 4c4741f6e7f2fa4e1486cb61e1c15b9236ec134d Author: Andrey Vatoropin Date: Wed Nov 19 10:51:12 2025 +0000 be2net: pass wrb_params in case of OS2BMC commit 7d277a7a58578dd62fd546ddaef459ec24ccae36 upstream. be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL at be_send_pkt_to_bmc() call site.  This may lead to dereferencing a NULL pointer when processing a workaround for specific packet, as commit bc0c3405abbb ("be2net: fix a Tx stall bug caused by a specific ipv6 packet") states. The correct way would be to pass the wrb_params from be_xmit(). Fixes: 760c295e0e8d ("be2net: Support for OS2BMC.") Cc: stable@vger.kernel.org Signed-off-by: Andrey Vatoropin Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fc6629b1f0738acd8b85c4dcd967abb9282fd580 Author: Yihang Li Date: Thu Nov 20 11:50:23 2025 +0800 ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan() commit b32cc17d607e8ae7af037303fe101368cb4dc44c upstream. Call scsi_device_put() in ata_scsi_dev_rescan() if the device or its queue are not running. Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") Cc: stable@vger.kernel.org Signed-off-by: Yihang Li Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit 2c0622f867ed1f57c51b1c9579af695ab1c876e8 Author: Bitterblue Smith Date: Fri Nov 14 00:54:48 2025 +0200 wifi: rtw89: hw_scan: Don't let the operating channel be last commit e837b9091b277ae6f309d7e9fc93cb0308cf461f upstream. Scanning can be offloaded to the firmware. To that end, the driver prepares a list of channels to scan, including periodic visits back to the operating channel, and sends the list to the firmware. When the channel list is too long to fit in a single H2C message, the driver splits the list, sends the first part, and tells the firmware to scan. When the scan is complete, the driver sends the next part of the list and tells the firmware to scan. When the last channel that fit in the H2C message is the operating channel something seems to go wrong in the firmware. It will acknowledge receiving the list of channels but apparently it will not do anything more. The AP can't be pinged anymore. The driver still receives beacons, though. One way to avoid this is to split the list of channels before the operating channel. Affected devices: * RTL8851BU with firmware 0.29.41.3 * RTL8832BU with firmware 0.29.29.8 * RTL8852BE with firmware 0.29.29.8 The commit 57a5fbe39a18 ("wifi: rtw89: refactor flow that hw scan handles channel list") is found by git blame, but it is actually to refine the scan flow, but not a culprit, so skip Fixes tag. Reported-by: Bitterblue Smith Closes: https://lore.kernel.org/linux-wireless/0abbda91-c5c2-4007-84c8-215679e652e1@gmail.com/ Cc: stable@vger.kernel.org # 6.16+ Signed-off-by: Bitterblue Smith Acked-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/c1e61744-8db4-4646-867f-241b47d30386@gmail.com Signed-off-by: Greg Kroah-Hartman commit 8d7a5b0e5a07c0e10f5899ea3bb56f2d43c67eb3 Author: Henrique Carvalho Date: Thu Nov 13 15:09:13 2025 -0300 smb: client: introduce close_cached_dir_locked() commit a9d1f38df7ecd0e21233447c9cc6fa1799eddaf3 upstream. Replace close_cached_dir() calls under cfid_list_lock with a new close_cached_dir_locked() variant that uses kref_put() instead of kref_put_lock() to avoid recursive locking when dropping references. While the existing code works if the refcount >= 2 invariant holds, this area has proven error-prone. Make deadlocks impossible and WARN on invariant violations. Cc: stable@vger.kernel.org Reviewed-by: David Howells Signed-off-by: Henrique Carvalho Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 21879b76831fab52f6a615c531f86412c8d3c827 Author: Stephen Smalley Date: Thu Nov 13 15:23:14 2025 -0500 selinux: move avdcache to per-task security struct commit dde3a5d0f4dce1d1a6095e6b8eeb59b75d28fb3b upstream. The avdcache is meant to be per-task; move it to a new task_security_struct that is duplicated per-task. Cc: stable@vger.kernel.org Fixes: 5d7ddc59b3d89b724a5aa8f30d0db94ff8d2d93f ("selinux: reduce path walk overhead") Signed-off-by: Stephen Smalley [PM: line length fixes] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 646322cf7c95e0333b165a5d8686abf98992cee3 Author: Stephen Smalley Date: Thu Nov 13 15:23:13 2025 -0500 selinux: rename task_security_struct to cred_security_struct commit 75f72fe289a7f76204a728668edcf20e4a2a6097 upstream. Before Linux had cred structures, the SELinux task_security_struct was per-task and although the structure was switched to being per-cred long ago, the name was never updated. This change renames it to cred_security_struct to avoid confusion and pave the way for the introduction of an actual per-task security structure for SELinux. No functional change. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 447de5c5d2486cde730aa822d5285d16afb13c8b Author: Niklas Cassel Date: Wed Nov 19 15:13:14 2025 +0100 ata: libata-scsi: Fix system suspend for a security locked drive commit b11890683380a36b8488229f818d5e76e8204587 upstream. Commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") fixed ata_to_sense_error() to properly generate sense key ABORTED COMMAND (without any additional sense code), instead of the previous bogus sense key ILLEGAL REQUEST with the additional sense code UNALIGNED WRITE COMMAND, for a failed command. However, this broke suspend for Security locked drives (drives that have Security enabled, and have not been Security unlocked by boot firmware). The reason for this is that the SCSI disk driver, for the Synchronize Cache command only, treats any sense data with sense key ILLEGAL REQUEST as a successful command (regardless of ASC / ASCQ). After commit cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") the code that treats any sense data with sense key ILLEGAL REQUEST as a successful command is no longer applicable, so the command fails, which causes the system suspend to be aborted: sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5 sd 1:0:0:0: PM: failed to suspend async: error -5 PM: Some devices failed to suspend, or early wake event detected To make suspend work once again, for a Security locked device only, return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense data which a real SCSI device would have returned if locked. The SCSI disk driver treats this sense data as a successful command. Cc: stable@vger.kernel.org Reported-by: Ilia Baryshnikov Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704 Fixes: cf3fc037623c ("ata: libata-scsi: Fix ata_to_sense_error() status handling") Reviewed-by: Hannes Reinecke Reviewed-by: Martin K. Petersen Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit 209773caeb2ec1e5ff50d7e634c0e070657a017b Author: Tony Luck Date: Tue Nov 18 17:27:12 2025 -0800 ACPI: APEI: EINJ: Fix EINJV2 initialization and injection commit d2932a59c2d4fb364396f21df58431c44918dd47 upstream. ACPI 6.6 specification for EINJV2 appends an extra structure to the end of the existing struct set_error_type_with_address. Several issues showed up in testing. 1) Initialization was broken by an earlier fix [1] since is_v2 is only set while performing an injection, not during initialization. 2) A buggy BIOS provided invalid "revision" and "length" for the extension structure. Add several sanity checks. 3) When injecting legacy error types on an EINJV2 capable system, don't copy the component arrays. Fixes: 6c7058514991 ("ACPI: APEI: EINJ: Check if user asked for EINJV2 injection") # [1] Fixes: b47610296d17 ("ACPI: APEI: EINJ: Enable EINJv2 error injections") Signed-off-by: Tony Luck [ rjw: Changelog edits ] Cc: 6.17+ # 6.17+ Link: https://patch.msgid.link/20251119012712.178715-1-tony.luck@intel.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit bb3267bedd902ec457643b1326cccddafb82e901 Author: Pasha Tatashin Date: Thu Nov 6 17:06:35 2025 -0500 lib/test_kho: check if KHO is enabled commit a26ec8f3d4e56d4a7ffa301e8032dca9df0bbc05 upstream. We must check whether KHO is enabled prior to issuing KHO commands, otherwise KHO internal data structures are not initialized. Link: https://lkml.kernel.org/r/20251106220635.2608494-1-pasha.tatashin@soleen.com Fixes: b753522bed0b ("kho: add test for kexec handover") Signed-off-by: Pasha Tatashin Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202511061629.e242724-lkp@intel.com Reviewed-by: Pratyush Yadav Reviewed-by: Mike Rapoport (Microsoft) Cc: Alexander Graf Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 1a0d5c74af9b6ba9ffdf1172de5a1a6df5922a00 Author: Jiayuan Chen Date: Tue Nov 11 14:02:51 2025 +0800 mptcp: Fix proto fallback detection with BPF commit c77b3b79a92e3345aa1ee296180d1af4e7031f8f upstream. The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() syn_recv_sock()/subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_syn_recv_sock() subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Then, this subflow can be normally used by sockmap, which replaces the native sk_prot with sockmap's custom sk_prot. The issue occurs when the user executes accept::mptcp_stream_accept::mptcp_fallback_tcp_ops(). Here, it uses sk->sk_prot to compare with the native sk_prot, but this is incorrect when sockmap is used, as we may incorrectly set sk->sk_socket->ops. This fix uses the more generic sk_family for the comparison instead. Additionally, this also prevents a WARNING from occurring: result from ./scripts/decode_stacktrace.sh: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 337 at net/mptcp/protocol.c:68 mptcp_stream_accept \ (net/mptcp/protocol.c:4005) Modules linked in: ... PKRU: 55555554 Call Trace: do_accept (net/socket.c:1989) __sys_accept4 (net/socket.c:2028 net/socket.c:2057) __x64_sys_accept (net/socket.c:2067) x64_sys_call (arch/x86/entry/syscall_64.c:41) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f87ac92b83d ---[ end trace 0000000000000000 ]--- Fixes: 0b4f33def7bb ("mptcp: fix tcp fallback crash") Signed-off-by: Jiayuan Chen Signed-off-by: Martin KaFai Lau Reviewed-by: Jakub Sitnicki Reviewed-by: Matthieu Baerts (NGI0) Cc: Link: https://patch.msgid.link/20251111060307.194196-3-jiayuan.chen@linux.dev Signed-off-by: Greg Kroah-Hartman commit 5386fdfbd8e28ebc78f6137a9f760be4c95edd49 Author: Heiko Carstens Date: Thu Nov 13 13:21:47 2025 +0100 s390/mm: Fix __ptep_rdp() inline assembly commit 31475b88110c4725b4f9a79c3a0d9bbf97e69e1c upstream. When a zero ASCE is passed to the __ptep_rdp() inline assembly, the generated instruction should have the R3 field of the instruction set to zero. However the inline assembly is written incorrectly: for such cases a zero is loaded into a register allocated by the compiler and this register is then used by the instruction. This means that selected TLB entries may not be flushed since the specified ASCE does not match the one which was used when the selected TLB entries were created. Fix this by removing the asce and opt parameters of __ptep_rdp(), since all callers always pass zero, and use a hard-coded register zero for the R3 field. Fixes: 0807b856521f ("s390/mm: add support for RDP (Reset DAT-Protection)") Cc: stable@vger.kernel.org Reviewed-by: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit 1a015bb2b85f011c4cada207c13b181281d26d4a Author: Jiayuan Chen Date: Tue Nov 11 14:02:50 2025 +0800 mptcp: Disallow MPTCP subflows from sockmap commit fbade4bd08ba52cbc74a71c4e86e736f059f99f7 upstream. The sockmap feature allows bpf syscall from userspace, or based on bpf sockops, replacing the sk_prot of sockets during protocol stack processing with sockmap's custom read/write interfaces. ''' tcp_rcv_state_process() subflow_syn_recv_sock() tcp_init_transfer(BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) bpf_skops_established <== sockops bpf_sock_map_update(sk) <== call bpf helper tcp_bpf_update_proto() <== update sk_prot ''' Consider two scenarios: 1. When the server has MPTCP enabled and the client also requests MPTCP, the sk passed to the BPF program is a subflow sk. Since subflows only handle partial data, replacing their sk_prot is meaningless and will cause traffic disruption. 2. When the server has MPTCP enabled but the client sends a TCP SYN without MPTCP, subflow_syn_recv_sock() performs a fallback on the subflow, replacing the subflow sk's sk_prot with the native sk_prot. ''' subflow_ulp_fallback() subflow_drop_ctx() mptcp_subflow_ops_undo_override() ''' Subsequently, accept::mptcp_stream_accept::mptcp_fallback_tcp_ops() converts the subflow to plain TCP. For the first case, we should prevent it from being combined with sockmap by setting sk_prot->psock_update_sk_prot to NULL, which will be blocked by sockmap's own flow. For the second case, since subflow_syn_recv_sock() has already restored sk_prot to native tcp_prot/tcpv6_prot, no further action is needed. Fixes: cec37a6e41aa ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by: Jiayuan Chen Signed-off-by: Martin KaFai Lau Reviewed-by: Matthieu Baerts (NGI0) Cc: Link: https://patch.msgid.link/20251111060307.194196-2-jiayuan.chen@linux.dev Signed-off-by: Greg Kroah-Hartman commit 6758ef4d18112d723375f9c9a88f04b8cc179ba4 Author: Yongpeng Yang Date: Tue Nov 4 20:50:07 2025 +0800 exfat: check return value of sb_min_blocksize in exfat_read_boot_sector commit f2c1f631630e01821fe4c3fdf6077bc7a8284f82 upstream. sb_min_blocksize() may return 0. Check its return value to avoid accessing the filesystem super block when sb->s_blocksize is 0. Cc: stable@vger.kernel.org # v6.15 Fixes: 719c1e1829166d ("exfat: add super block operations") Reviewed-by: Christoph Hellwig Signed-off-by: Yongpeng Yang Link: https://patch.msgid.link/20251104125009.2111925-3-yangyongpeng.storage@gmail.com Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 71f9ecd17b1078aeb91f496095c5226d1781add2 Author: Mike Yuan Date: Sat Nov 8 19:09:47 2025 +0000 shmem: fix tmpfs reconfiguration (remount) when noswap is set commit 3cd1548a278c7d6a9bdef1f1866e7cf66bfd3518 upstream. In systemd we're trying to switch the internal credentials setup logic to new mount API [1], and I noticed fsconfig(FSCONFIG_CMD_RECONFIGURE) consistently fails on tmpfs with noswap option. This can be trivially reproduced with the following: ``` int fs_fd = fsopen("tmpfs", 0); fsconfig(fs_fd, FSCONFIG_SET_FLAG, "noswap", NULL, 0); fsconfig(fs_fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); fsmount(fs_fd, 0, 0); fsconfig(fs_fd, FSCONFIG_CMD_RECONFIGURE, NULL, NULL, 0); <------ EINVAL ``` After some digging the culprit is shmem_reconfigure() rejecting !(ctx->seen & SHMEM_SEEN_NOSWAP) && sbinfo->noswap, which is bogus as ctx->seen serves as a mask for whether certain options are touched at all. On top of that, noswap option doesn't use fsparam_flag_no, hence it's not really possible to "reenable" swap to begin with. Drop the check and redundant SHMEM_SEEN_NOSWAP flag. [1] https://github.com/systemd/systemd/pull/39637 Fixes: 2c6efe9cf2d7 ("shmem: add support to ignore swap") Signed-off-by: Mike Yuan Link: https://patch.msgid.link/20251108190930.440685-1-me@yhndnzj.com Cc: Luis Chamberlain Cc: Christian Brauner Cc: Hugh Dickins Cc: stable@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 1afc4573fb22afe5aaa58f3aa6653c5fd20b9d3b Author: Yongpeng Yang Date: Tue Nov 4 20:50:08 2025 +0800 isofs: check the return value of sb_min_blocksize() in isofs_fill_super commit e106e269c5cb38315eb0a0e7e38f71e9b20c8c66 upstream. sb_min_blocksize() may return 0. Check its return value to avoid opt->blocksize and sb->s_blocksize is 0. Cc: stable@vger.kernel.org # v6.15 Fixes: 1b17a46c9243e9 ("isofs: convert isofs to use the new mount API") Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Signed-off-by: Yongpeng Yang Link: https://patch.msgid.link/20251104125009.2111925-4-yangyongpeng.storage@gmail.com Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit deb220e58973cb8b36de7cc6c91d68aa102aec11 Author: Yongpeng Yang Date: Tue Nov 4 20:50:09 2025 +0800 xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super commit 124af0868ec6929ba838fb76d25f00c06ba8fc0d upstream. sb_min_blocksize() may return 0. Check its return value to avoid the filesystem super block when sb->s_blocksize is 0. Cc: stable@vger.kernel.org # v6.15 Fixes: a64e5a596067bd ("bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()") Reviewed-by: Christoph Hellwig Signed-off-by: Yongpeng Yang Link: https://patch.msgid.link/20251104125009.2111925-5-yangyongpeng.storage@gmail.com Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 37944f4f8199cd153fef74e95ca268020162f212 Author: Dan Carpenter Date: Tue Sep 30 15:32:34 2025 +0300 mtdchar: fix integer overflow in read/write ioctls commit e4185bed738da755b191aa3f2e16e8b48450e1b8 upstream. The "req.start" and "req.len" variables are u64 values that come from the user at the start of the function. We mask away the high 32 bits of "req.len" so that's capped at U32_MAX but the "req.start" variable can go up to U64_MAX which means that the addition can still integer overflow. Use check_add_overflow() to fix this bug. Fixes: 095bb6e44eb1 ("mtdchar: add MEMREAD ioctl") Fixes: 6420ac0af95d ("mtdchar: prevent unbounded allocation in MEMWRITE ioctl") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit acfde9400e611c8d2668f1c70053c4a1d6ecfc36 Author: Zhen Ni Date: Mon Oct 13 19:41:51 2025 +0800 fs: Fix uninitialized 'offp' in statmount_string() commit 0778ac7df5137d5041783fadfc201f8fd55a1d9b upstream. In statmount_string(), most flags assign an output offset pointer (offp) which is later updated with the string offset. However, the STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the struct fields instead of using offp. This leaves offp uninitialized, leading to a possible uninitialized dereference when *offp is updated. Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code path consistent. Fixes: 37c4a9590e1e ("statmount: allow to retrieve idmappings") Fixes: e52e97f09fb6 ("statmount: let unset strings be empty") Cc: stable@vger.kernel.org Signed-off-by: Zhen Ni Link: https://patch.msgid.link/20251013114151.664341-1-zhen.ni@easystack.cn Reviewed-by: Jan Kara Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit 0c2a43cb43786011b48eeab6093db14888258c6b Author: Niravkumar L Rabara Date: Thu Oct 23 11:32:01 2025 +0800 mtd: rawnand: cadence: fix DMA device NULL pointer dereference commit 5c56bf214af85ca042bf97f8584aab2151035840 upstream. The DMA device pointer `dma_dev` was being dereferenced before ensuring that `cdns_ctrl->dmac` is properly initialized. Move the assignment of `dma_dev` after successfully acquiring the DMA channel to ensure the pointer is valid before use. Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address") Cc: stable@vger.kernel.org Signed-off-by: Niravkumar L Rabara Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit ee767b99b0045be286cceb8265bd4c9831be671e Author: Yongpeng Yang Date: Tue Nov 4 20:50:06 2025 +0800 vfat: fix missing sb_min_blocksize() return value checks commit 63b5aa01da0f38cdbd97d021477258e511631497 upstream. When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: 00005dcfe53d0080 RCX: 000072ee774f3afe [95553.726526] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003 [95553.727176] RBP: 00007ffe97148ac0 R08: 0000000000000000 R09: 000072ee775e7ac0 [95553.727818] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [95553.728459] R13: 00005dcfe53d04b0 R14: 000072ee77670b00 R15: 00005dcfe53d1a28 [95553.729086] The panic occurs as follows: 1. logical_block_size is 8KiB, causing {struct super_block *sb}->s_blocksize is initialized to 0. vfat_fill_super - fat_fill_super - sb_min_blocksize - sb_set_blocksize //return 0 when size is 8KiB. 2. __bread_gfp is called with size == 0, causing folio_alloc_buffers() to compute an offset equal to folio_size(folio), which triggers a BUG_ON. fat_fill_super - sb_bread - __bread_gfp // size == {struct super_block *sb}->s_blocksize == 0 - bdev_getblk - __getblk_slow - grow_buffers - grow_dev_folio - folio_alloc_buffers // size == 0 - folio_set_bh //offset == folio_size(folio) and panic To fix this issue, add proper return value checks for sb_min_blocksize(). Cc: stable@vger.kernel.org # v6.15 Fixes: a64e5a596067bd ("bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()") Reviewed-by: Matthew Wilcox Reviewed-by: Darrick J. Wong Reviewed-by: Jan Kara Reviewed-by: OGAWA Hirofumi Reviewed-by: Christoph Hellwig Signed-off-by: Yongpeng Yang Link: https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com Acked-by: OGAWA Hirofumi Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman commit e337a45b15538d3ea2cf240d6e1dbc8075c1bc1a Author: Yosry Ahmed Date: Wed Nov 12 01:30:17 2025 +0000 KVM: SVM: Fix redundant updates of LBR MSR intercepts commit 3fa05f96fc08dff5e846c2cc283a249c1bf029a1 upstream. Don't update the LBR MSR intercept bitmaps if they're already up-to-date, as unconditionally updating the intercepts forces KVM to recalculate the MSR bitmaps for vmcb02 on every nested VMRUN. The redundant updates are functionally okay; however, they neuter an optimization in Hyper-V nested virtualization enlightenments and this manifests as a self-test failure. In particular, Hyper-V lets L1 mark "nested enlightenments" as clean, i.e. tell KVM that no changes were made to the MSR bitmap since the last VMRUN. The hyperv_svm_test KVM selftest intentionally changes the MSR bitmap "without telling KVM about it" to verify that KVM honors the clean hint, correctly fails because KVM notices the changed bitmap anyway: ==== Test Assertion Failure ==== x86/hyperv_svm_test.c:120: vmcb->control.exit_code == 0x081 pid=193558 tid=193558 errno=4 - Interrupted system call 1 0x0000000000411361: assert_on_unhandled_exception at processor.c:659 2 0x0000000000406186: _vcpu_run at kvm_util.c:1699 3 (inlined by) vcpu_run at kvm_util.c:1710 4 0x0000000000401f2a: main at hyperv_svm_test.c:175 5 0x000000000041d0d3: __libc_start_call_main at libc-start.o:? 6 0x000000000041f27c: __libc_start_main_impl at ??:? 7 0x00000000004021a0: _start at ??:? vmcb->control.exit_code == SVM_EXIT_VMMCALL Do *not* fix this by skipping svm_hv_vmcb_dirty_nested_enlightenments() when svm_set_intercept_for_msr() performs a no-op change. changes to the L0 MSR interception bitmap are only triggered by full CPUID updates and MSR filter updates, both of which should be rare. Changing svm_set_intercept_for_msr() risks hiding unintended pessimizations like this one, and is actually more complex than this change. Fixes: fbe5e5f030c2 ("KVM: nSVM: Always recalculate LBR MSR intercepts in svm_update_lbrv()") Cc: stable@vger.kernel.org Signed-off-by: Yosry Ahmed Link: https://patch.msgid.link/20251112013017.1836863-1-yosry.ahmed@linux.dev [Rewritten commit message based on mailing list discussion. - Paolo] Reviewed-by: Sean Christopherson Tested-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 359eeefff4a70ac03e5725d5b9baa1e4666245d4 Author: Quentin Schulz Date: Wed Nov 12 16:01:53 2025 +0100 arm64: dts: rockchip: disable HS400 on RK3588 Tiger commit baa18d577cd445145039e731d3de0fa49ca57204 upstream. We've had reports from the field that some RK3588 Tiger have random issues with eMMC errors. Applying commit a28352cf2d2f ("mmc: sdhci-of-dwcmshc: Change DLL_STRBIN_TAPNUM_DEFAULT to 0x4") didn't help and seemed to have made things worse for our board. Our HW department checked the eMMC lines and reported that they are too long and don't look great so signal integrity is probably not the best. Note that not all Tigers with the same eMMC chip have errors, so the suspicion is that we're really on the edge in terms of signal integrity and only a handful devices are failing. Additionally, we have RK3588 Jaguars with the same eMMC chip but the layout is different and we also haven't received reports about those so far. Lowering the max-frequency to 150MHz from 200MHz instead of simply disabling HS400 was briefly tested and seem to work as well. We've disabled HS400 downstream and haven't received reports since so we'll go with that instead of lowering the max-frequency. Signed-off-by: Quentin Schulz Fixes: 6173ef24b35b ("arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251112-tiger-hs200-v1-1-b50adac107c0@cherry.de [added Fixes tag and stable-cc from 2nd mail] Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit ed4b77f0f45e17962def0fd4f93eb2d9c6952220 Author: Quentin Schulz Date: Wed Oct 29 14:50:59 2025 +0100 arm64: dts: rockchip: include rk3399-base instead of rk3399 in rk3399-op1 commit 08d70143e3033d267507deb98a5fd187df3e6640 upstream. In commit 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi files for SoC variants"), everything shared between variants of RK3399 was put into rk3399-base.dtsi and the rest in variant-specific DTSI, such as rk3399-t, rk3399-op1, rk3399, etc. Therefore, the variant-specific DTSI should include rk3399-base.dtsi and not another variant's DTSI. rk3399-op1 wrongly includes rk3399 (a variant) DTSI instead of rk3399-base DTSI, let's fix this oversight by including the intended DTSI. Fortunately, this had no impact on the resulting DTB since all nodes were named the same and all node properties were overridden in rk3399-op1.dtsi. This was checked by doing a checksum of rk3399-op1 DTBs before and after this commit. No intended change in behavior. Fixes: 296602b8e5f7 ("arm64: dts: rockchip: Move RK3399 OPPs to dtsi files for SoC variants") Cc: stable@vger.kernel.org Signed-off-by: Quentin Schulz Reviewed-by: Dragan Simic Link: https://patch.msgid.link/20251029-rk3399-op1-include-v1-1-2472ee60e7f8@cherry.de Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit 95aeda9cb135ceb5f936c48c87e993e75c6fc2fb Author: Laurentiu Mihalcea Date: Tue Nov 4 04:02:54 2025 -0800 reset: imx8mp-audiomix: Fix bad mask values commit 997c06330fd5c2e220b692f2a358986c6c8fd5a2 upstream. As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1 "memory map", the definition of the EARC control register shows that the EARC controller software reset is controlled via bit 0, while the EARC PHY software reset is controlled via bit 1. This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would imply that the EARC controller software reset is controlled via bit 1 and the EARC PHY software reset is controlled via bit 2. Fix them. Fixes: a83bc87cd30a ("reset: imx8mp-audiomix: Prepare the code for more reset bits") Cc: stable@vger.kernel.org Reviewed-by: Shengjiu Wang Reviewed-by: Frank Li Reviewed-by: Daniel Baluta Signed-off-by: Laurentiu Mihalcea Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman commit 8aa52de580f2a1d8004b25acae43dac18b312fff Author: Mykola Kvach Date: Mon Nov 3 12:27:40 2025 +0200 arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on orangepi-5 commit b5414520793e68d266fdd97a84989d9831156aad upstream. The vcc3v3_pcie20 fixed regulator powers the PCIe device-side 3.3V rail for pcie2x1l2 via vpcie3v3-supply. The DTS mistakenly set its regulator-min/max-microvolt to 1800000 (1.8 V). Correct both to 3300000 (3.3 V) to match the rail name, the PCIe/M.2 power requirement, and the actual hardware wiring on Orange Pi 5. Fixes: b6bc755d806e ("arm64: dts: rockchip: Add Orange Pi 5") Cc: stable@vger.kernel.org Signed-off-by: Mykola Kvach Reviewed-by: Michael Riesch Link: https://patch.msgid.link/cf6e08dfdfbf1c540685d12388baab1326f95d2c.1762165324.git.xakep.amatop@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit 628a2db8a24a82c7c7e613947d1b68b25bf58ce2 Author: Diederik de Haas Date: Mon Oct 27 16:54:28 2025 +0100 arm64: dts: rockchip: Fix vccio4-supply on rk3566-pinetab2 commit 03c7e964a02e388ee168c804add7404eda23908c upstream. Page 13 of the PineTab2 v2 schematic dd 20230417 shows VCCIO4's power source is VCCIO_WL. Page 19 shows that VCCIO_WL is connected to VCCA1V8_PMU, so fix the PineTab2 dtsi to reflect that. Fixes: 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64 PineTab2") Cc: stable@vger.kernel.org Reviewed-by: Dragan Simic Signed-off-by: Diederik de Haas Link: https://patch.msgid.link/20251027155724.138096-1-diederik@cknow-tech.com Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit 2e6202915d4785b7ba96733b9bb8e6fb510ed34f Author: Zhang Heng Date: Fri Sep 12 20:38:18 2025 +0800 HID: quirks: work around VID/PID conflict for 0x4c4a/0x4155 commit beab067dbcff642243291fd528355d64c41dc3b2 upstream. Based on available evidence, the USB ID 4c4a:4155 used by multiple devices has been attributed to Jieli. The commit 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") affected touchscreen functionality. Added checks for manufacturer and serial number to maintain microphone compatibility, enabling both devices to function properly. [jkosina@suse.com: edit shortlog] Fixes: 1a8953f4f774 ("HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY") Cc: stable@vger.kernel.org Tested-by: staffan.melin@oscillator.se Reviewed-by: Terry Junge Signed-off-by: Zhang Heng Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit e3b8ef12f0921066ec1da36aa6918ccaa4bf943a Author: Mario Limonciello (AMD) Date: Mon Oct 20 10:50:42 2025 -0500 HID: amd_sfh: Stop sensor before starting commit 4d3a13afa8b64dc49293b3eab3e7beac11072c12 upstream. Titas reports that the accelerometer sensor on their laptop only works after a warm boot or unloading/reloading the amd-sfh kernel module. Presumably the sensor is in a bad state on cold boot and failing to start, so explicitly stop it before starting. Cc: stable@vger.kernel.org Fixes: 93ce5e0231d79 ("HID: amd_sfh: Implement SFH1.1 functionality") Reported-by: Titas Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220670 Tested-by: Titas Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit f1aa231c929025f7cedcc6754aba852afd0b7b99 Author: Alexey Charkov Date: Thu Oct 9 16:34:01 2025 +0400 arm64: dts: rockchip: Remove non-functioning CPU OPPs from RK3576 commit 05b80cd1f37db042e074ecc7ee0d39869fed2f52 upstream. Drop the top-frequency OPPs from both the LITTLE and big CPU clusters on RK3576, as neither the opensource TF-A [1] nor the recent (after v1.08) binary BL31 images provided by Rockchip expose those. This fixes the problem [2] when the cpufreq governor tries to jump directly to the highest-frequency OPP, which results in a failed SCMI call leaving the system stuck at the previous OPP before the attempted change. [1] https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/rockchip/rk3576/scmi/rk3576_clk.c#L264-L304 [2] https://lore.kernel.org/linux-rockchip/CABjd4Yz4NbqzZH4Qsed3ias56gcga9K6CmYA+BLDBxtbG915Ag@mail.gmail.com/ Fixes: 57b1ce903966 ("arm64: dts: rockchip: Add rk3576 SoC base DT") Cc: stable@vger.kernel.org Signed-off-by: Alexey Charkov Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman commit a01efa7a780c42ac5170a949bd95c9786ffcc60a Author: Yipeng Zou Date: Sat Nov 22 09:39:42 2025 +0000 timers: Fix NULL function pointer race in timer_shutdown_sync() commit 20739af07383e6eb1ec59dcd70b72ebfa9ac362c upstream. There is a race condition between timer_shutdown_sync() and timer expiration that can lead to hitting a WARN_ON in expire_timers(). The issue occurs when timer_shutdown_sync() clears the timer function to NULL while the timer is still running on another CPU. The race scenario looks like this: CPU0 CPU1 lock_timer_base() expire_timers() base->running_timer = timer; unlock_timer_base() [call_timer_fn enter] mod_timer() ... timer_shutdown_sync() lock_timer_base() // For now, will not detach the timer but only clear its function to NULL if (base->running_timer != timer) ret = detach_if_pending(timer, base, true); if (shutdown) timer->function = NULL; unlock_timer_base() [call_timer_fn exit] lock_timer_base() base->running_timer = NULL; unlock_timer_base() ... // Now timer is pending while its function set to NULL. // next timer trigger expire_timers() WARN_ON_ONCE(!fn) // hit ... lock_timer_base() // Now timer will detach if (base->running_timer != timer) ret = detach_if_pending(timer, base, true); if (shutdown) timer->function = NULL; unlock_timer_base() The problem is that timer_shutdown_sync() clears the timer function regardless of whether the timer is currently running. This can leave a pending timer with a NULL function pointer, which triggers the WARN_ON_ONCE(!fn) check in expire_timers(). Fix this by only clearing the timer function when actually detaching the timer. If the timer is running, leave the function pointer intact, which is safe because the timer will be properly detached when it finishes running. Fixes: 0cc04e80458a ("timers: Add shutdown mechanism to the internal functions") Signed-off-by: Yipeng Zou Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251122093942.301559-1-zouyipeng@huawei.com Signed-off-by: Greg Kroah-Hartman commit f9f1aed6c8a3427900da3121e1868124854569c3 Author: Sebastian Ene Date: Fri Oct 17 07:57:10 2025 +0000 KVM: arm64: Check the untrusted offset in FF-A memory share commit 103e17aac09cdd358133f9e00998b75d6c1f1518 upstream. Verify the offset to prevent OOB access in the hypervisor FF-A buffer in case an untrusted large enough value [U32_MAX - sizeof(struct ffa_composite_mem_region) + 1, U32_MAX] is set from the host kernel. Signed-off-by: Sebastian Ene Acked-by: Will Deacon Link: https://patch.msgid.link/20251017075710.2605118-1-sebastianene@google.com Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman