commit 26deb9f9c427c0382f855546d23dba76c49e680c Author: Greg Kroah-Hartman Date: Mon Jun 1 17:46:33 2026 +0200 Linux 6.12.92 Link: https://lore.kernel.org/r/20260528194629.379955525@linuxfoundation.org Tested-by: Dominique Martinet Tested-by: Ron Economos Tested-by: Miguel Ojeda Tested-by: Francesco Dolcini Tested-by: Brett A C Sheffield Tested-by: Salvatore Bonaccorso Tested-by: Peter Schneider Tested-by: Florian Fainelli Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 5659e6923cb72f8e18e8b539109ab512455fe195 Author: Linus Torvalds Date: Thu May 28 11:45:41 2026 -0700 security/keys: fix missed RCU read section on lookup commit 43a1e3744548e6fd85873e6fb43e293eb4010694 upstream. Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. Reported-by: Nicholas Carlini Cc: David Howells Cc: Jarkko Sakkinen Cc: Paul Moore Cc: James Morris James Morris Cc: Serge E. Hallyn Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 716bb3cfd1c805c18cf4628ef0cc1f51b86a1986 Author: Jens Axboe Date: Fri Nov 29 15:53:58 2024 -0700 block: make bio_integrity_map_user() static inline [ Upstream commit 546d191427cf5cf3215529744c2ea8558f0279db ] If CONFIG_BLK_DEV_INTEGRITY isn't set, then the dummy helper must be static inline to avoid complaints about the function being unused. Fixes: fe8f4ca7107e ("block: modify bio_integrity_map_user to accept iov_iter as argument") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202411300229.y7h60mDg-lkp@intel.com/ Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit a366a9e54effbebb176e4fe701978e338e42edff Author: Matthieu Buffet Date: Thu May 28 12:14:26 2026 +0000 landlock: Fix TCP handling of short AF_UNSPEC addresses [ Upstream commit e4d82cbce2258f454634307fdabf33aa46b61ab0 ] current_check_access_socket() treats AF_UNSPEC addresses as AF_INET ones, and only later adds special case handling to allow connect(AF_UNSPEC), and on IPv4 sockets bind(AF_UNSPEC+INADDR_ANY). This would be fine except AF_UNSPEC addresses can be as short as a bare AF_UNSPEC sa_family_t field, and nothing more. The AF_INET code path incorrectly enforces a length of sizeof(struct sockaddr_in) instead. Move AF_UNSPEC edge case handling up inside the switch-case, before the address is (potentially incorrectly) treated as AF_INET. Fixes: fff69fb03dde ("landlock: Support network rules with TCP bind and connect") Signed-off-by: Matthieu Buffet Link: https://lore.kernel.org/r/20251027190726.626244-4-matthieu@buffet.re Signed-off-by: Mickaël Salaün [ There was a conflict due to missing commit 9f74411a40ce ("landlock: Log TCP bind and connect denials") ] Signed-off-by: Maximilian Heyne Signed-off-by: Sasha Levin commit b440f1ded4b1d489707a626b7cdc01a6ce6e25d0 Author: Tiezhu Yang Date: Fri May 22 15:05:07 2026 +0800 LoongArch: kprobes: Fix handling of fatal unrecoverable recursions [ Upstream commit 1c856e158fd34ef2c4475a81c1dc386329989938 ] KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that can not be safely recovered in kprobes. KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At this point, the architecture-specific single-step context is already active. Nested single-stepping would corrupt the state, as the kprobe control block (kcb) and hardware registers cannot safely store multiple levels of stepping state. KPROBE_REENTER means that a third-level recursion occurs when a probe is hit while the system is already handling a nested probe (second- level). The kcb only provides a single slot (prev_kprobe) to backup the state. When a third probe is hit, there is no more space to save the state without corrupting the first-level backup. Kprobes work by replacing instructions with breakpoints. In order to execute the original instruction and continue, it must be moved to a temporary "single-step" slot. Since there is no backup space left to set up this slot safely, the CPU would be forced to return to the same original breakpoint address, triggering an endless loop. Currently, the code only prints a warning and returns. This leads to an infinite re-entry loop as the CPU repeatedly hits the same trap and a "stuck" CPU core because preemption was disabled at the start of the handler and never re-enabled in this early return path. Fix the logic by: 1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent fatal recursions that cannot be safely recovered. 2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This aligns LoongArch with other architectures (x86, arm64, riscv) and prevents stack overflow while providing diagnostic information. Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen Signed-off-by: Sasha Levin commit 479084ae0e1d9cb7929cb4298d35623de189f80a Author: Sabrina Dubroca Date: Wed May 20 22:44:42 2026 +0200 net: gro: don't merge zcopy skbs [ Upstream commit 4db79a322db8c97f7b73b8a347395ef4d685eb40 ] skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs. Fixes: 753f1ca4e1e5 ("net: introduce managed frags infrastructure") Reported-by: Huzaifa Sidhpurwala Signed-off-by: Sabrina Dubroca Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 11dc18bf509dc6a71244a48c623fea6a4c994128 Author: Nikhil P. Rao Date: Wed May 20 20:58:42 2026 +0000 pds_core: ensure null-termination for firmware version strings [ Upstream commit 3d4432d34c1992701289cbe12df9fd024f315998 ] The driver passes fw_version directly to devlink_info_version_stored_put() without ensuring null-termination. While current firmware null-terminates these strings, the driver should not rely on this behavior. Add explicit null-termination to prevent potential issues if firmware behavior changes. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 763a372d344fb12fae566d36ddb46e92454ad58c Author: Aditya Garg Date: Tue May 19 22:15:53 2026 -0700 net: mana: validate rx_req_idx to prevent out-of-bounds array access [ Upstream commit b809d0409991b75a6cff846a5ac27c3062953f84 ] In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e3de9cfa048055c3ac050e197ed402816a70c146 Author: Ratheesh Kannoth Date: Wed May 20 10:00:36 2026 +0530 octeontx2-af: npc: Fix allmulticast skip logic for LBK and SDP VFs [ Upstream commit 9eddc819f00b5b74bb4ac91396f80bd35f5f3561 ] When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry() should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is never true for a single pcifunc, so the intended early return never ran. Use logical OR instead. Cc: Geetha sowjanya Fixes: ae703539f49d2 ("octeontx2-af: Cleanup loopback device checks") Signed-off-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ede0dda8a3937899988a3f8826664e97c7925be4 Author: Shuicheng Lin Date: Thu May 14 20:32:10 2026 +0000 drm/xe/oa: Fix exec_queue leak on width check in stream open [ Upstream commit 4d25342543c01310fc4e0cba7cb17c775e2421e2 ] In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the function returns -EOPNOTSUPP directly, skipping the existing err_exec_q cleanup path. The exec_queue reference obtained by xe_exec_queue_lookup() is leaked. The exec queue holds a reference on the xe_file, which is only dropped during queue teardown. The leaked lookup ref is not on the file's exec_queue xarray, so file close cannot release it. This keeps both the exec queue and the file private state pinned indefinitely. Jump to err_exec_q instead of returning directly so the reference is released. Fixes: f0ed39830e60 ("xe/oa: Fix query mode of operation for OAR/OAC") Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Ashutosh Dixit Link: https://patch.msgid.link/20260514203210.593488-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin (cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit d912eee1b8e205d2450440354e83d40ca6ac7787 Author: Richard Fitzgerald Date: Thu May 21 13:30:57 2026 +0100 ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove() [ Upstream commit 18e7bd9f2446664053f8c34b72abd4606d22d858 ] Use flush_work() instead of cancel_work_sync() to terminate pending IRQ work in cs35l56_sdw_remove(). And flush_work() again after masking the interrupts to flush any queueing that was racing with the masking. This is the same sequence as cs35l56_sdw_system_suspend(). cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering- down before the interrupt status can be read and handled. The work releases this pm_runtime. So cancelling it, instead of flushing, could leave an unbalanced pm_runtime. Signed-off-by: Richard Fitzgerald Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 973e8461ad9de27f344e2ac3ca6c5536f8b2a32a Author: Bartosz Golaszewski Date: Thu May 21 10:42:16 2026 +0200 gpio: cdev: check if uAPI v2 config attributes are correctly zeroed [ Upstream commit 3e6ccd790ed69bedd3d9626d01dd35cf9821c121 ] We check the padding of other uAPI v2 structures but not that of line config attributes. For used attributes: check if their padding is zeroed, for unused: check if the entire structure is zeroed. Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reviewed-by: Kent Gibson Link: https://patch.msgid.link/20260521-gpio-cdev-attr-padding-check-v3-1-ec3bcbe2e358@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit ab72f17e36a7ea4017bdd799e710da13765710fe Author: Andy Shevchenko Date: Sun Nov 10 22:16:15 2024 +0200 gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) [ Upstream commit e106b1dd38e723ec2bb2bf57ea9b2aff464b9423 ] Use the mem_is_zero() helper where possible. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20241110201706.16614-1-andy.shevchenko@gmail.com Signed-off-by: Bartosz Golaszewski Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed") Signed-off-by: Sasha Levin commit 7c8cf21bc4efb4af18d6096db3f8bd06d622251c Author: Xingwang Xiang Date: Sun May 17 23:56:26 2026 +0900 bpf, skmsg: fix verdict sk_data_ready racing with ktls rx [ Upstream commit ddf8029623a1af20e984c040e89ff918158397ab ] sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg(). Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program") Signed-off-by: Xingwang Xiang Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9883f4500b014d0e5f9be6d04b1244cce5a3f9b2 Author: Rosen Penev Date: Sat May 16 14:26:16 2026 -0700 net: ag71xx: check error for platform_get_irq [ Upstream commit e7c70bf97e90d974cd575e4c90f8f9b07d056da3 ] Complete error handling for a failed platform_get_irq() call Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Rosen Penev Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20260516212616.11758-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 68c027c2003b0a8a1439d0301c59c6fd1eb3b844 Author: Jiajia Liu Date: Mon May 18 10:24:02 2026 +0800 Bluetooth: btmtk: fix urb->setup_packet leak in error paths [ Upstream commit dd1dda6b8d6e1f4376a5b3055a04f0ecbdb4d6bd ] The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths. Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jiajia Liu Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit be4e99038c1603fa6b329d8ee3e364825e17c353 Author: David Carlier Date: Fri May 8 20:57:47 2026 +0100 tracing: Avoid NULL return from hist_field_name() on truncation [ Upstream commit 576ec047d20b368b43c4d5db98c4f2e0f3c101ec ] hist_field_name() returns "" everywhere except the fully-qualified VAR_REF/EXPR case, where snprintf() truncation returns NULL early and bypasses the bottom NULL->"" guard. Callers don't expect NULL: strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758 and the strcmp() in the sort-key match loop at :4804 both deref it. system and event_name are bounded by MAX_EVENT_NAME_LEN, but the field name on a VAR_REF is kstrdup'd from a histogram variable name parsed out of the trigger string and has no length cap, so a long enough var name in a fully qualified reference can reach the truncation path. Keep the length check but leave field_name as "" on overflow. Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com Fixes: 5ec1d1e97de1 ("tracing: Rebuild full_name on each hist_field_name() call") Signed-off-by: David Carlier Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin commit 0cb1ad795570167558530d6194297ac2396a1991 Author: Zhang Cen Date: Wed May 20 18:32:49 2026 +0800 ALSA: seq: Serialize UMP output teardown with event_input [ Upstream commit 60a1969fae6209644698fca91c185d153674f631 ] seq_ump_process_event() borrows client->out_rfile.output without synchronizing with the first-open and last-close transition in seq_ump_client_open() and seq_ump_client_close(). The last output unuse can therefore drop opened[STR_OUT] to zero and release the rawmidi file while an in-flight event_input callback is still inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream runtime exposed to teardown before the write path has taken its own buffer reference. Add a per-client rwlock for the event_input-visible output file. Publish a newly opened output file under the write side, and hold the read side from the output lookup through snd_rawmidi_kernel_write(). The last output close copies and clears the visible output file under the write side, then drops the lock and releases the saved rawmidi file. Use IRQ-safe rwlock guards because event_input can also be reached from atomic sequencer delivery. The buggy scenario involves two paths, with each column showing the order within that path: path A label: event_input path path B label: last unuse path 1. seq_ump_process_event() reads 1. seq_ump_client_close() client->out_rfile.output. drops opened[STR_OUT] to zero. 2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release() has not yet pinned runtime. closes the output file. 3. The writer continues using 3. close_substream() frees the borrowed substream. substream->runtime. This keeps the output substream and runtime alive for the full event_input write while keeping rawmidi release outside the rwlock. KASAN reproduced this as a slab-use-after-free in snd_rawmidi_kernel_write1(), with allocation through seq_ump_use()/snd_seq_port_connect() and free through seq_ump_unuse()/snd_seq_port_disconnect(). Suggested-by: Takashi Iwai Validation reproduced this kernel report: KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400 RIP: 0033:0x7f5528af837f Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x650 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x1a7/0x340 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) snd_rawmidi_kernel_write1+0x9d/0x400 (?:?) __asan_load8+0x82/0xb0 (?:?) update_stack_state+0x1ef/0x2d0 (?:?) snd_rawmidi_kernel_write+0x1a/0x20 (?:?) seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82) __snd_seq_deliver_single_event+0x8a/0xe0 (?:?) snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?) lock_acquire+0x14e/0x2e0 (?:?) find_held_lock+0x31/0x90 (?:?) snd_seq_port_use_ptr+0xa6/0xe0 (?:?) __kasan_check_write+0x18/0x20 (?:?) do_raw_read_unlock+0x32/0xa0 (?:?) _raw_read_unlock+0x26/0x50 (?:?) snd_seq_deliver_single_event+0x45c/0x4b0 (?:?) snd_seq_deliver_event+0x10d/0x1b0 (?:?) snd_seq_client_enqueue_event+0x192/0x240 (?:?) snd_seq_write+0x2cd/0x450 (?:?) apparmor_file_permission+0x20/0x30 (?:?) security_file_permission+0x51/0x60 (?:?) vfs_write+0x1ce/0x850 (?:?) __fget_files+0x12b/0x220 (?:?) lock_release+0xc8/0x2a0 (?:?) __rcu_read_unlock+0x74/0x2d0 (?:?) __fget_files+0x135/0x220 (?:?) ksys_write+0x15a/0x180 (?:?) rcu_is_watching+0x24/0x60 (?:?) __x64_sys_write+0x46/0x60 (?:?) x64_sys_call+0x7d/0x20d0 (?:?) do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device") Signed-off-by: Zhang Cen Link: https://patch.msgid.link/20260520103249.3048345-1-rollkingzzc@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 1f573e17bcb7275ddd1c8f47f46ae0faf0e902a4 Author: Johannes Berg Date: Fri May 8 09:10:31 2026 +0200 wifi: mac80211: fix MLE defragmentation [ Upstream commit a74e893f30db64cdce0fc7a96d3baa417bcd55f5 ] If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines. Fixes: 4d70e9c5488d ("wifi: mac80211: defragment reconfiguration MLE when parsing") Reviewed-by: Miriam Rachel Korenblit Reviewed-by: Ilan Peer Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 26e19622c485e53c3fdb299e822068a0542ddf0c Author: Nikhil P. Rao Date: Fri May 15 21:29:07 2026 +0000 pds_core: fix debugfs_lookup dentry leak and error handling [ Upstream commit dc416e32baaeb620b9809e9e25fc7b30889686e9 ] debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash. Fixes: bc90fbe0c318 ("pds_core: Rework teardown/setup flow to be more common") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 10ae3180095bbe2d378c5b1d6f2f2fd74dda3cc2 Author: Nikhil P. Rao Date: Fri May 15 21:29:05 2026 +0000 pds_core: fix error handling in pdsc_devcmd_wait [ Upstream commit 0e46b6635b03d29807f810c3b415c4755a3f958d ] Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ebe5561154c823b323bd06e350b55e0b8604d851 Author: Ido Schimmel Date: Sun May 17 15:11:21 2026 +0300 bridge: mcast: Fix a possible use-after-free when removing a bridge port [ Upstream commit 4df78ff02629c7729168f0696a7a2123c389818d ] When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/ Reported-by: Thomas Gleixner Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1a3fc537744b01c462c6342b9ab36a4181a3bdb1 Author: Petr Machata Date: Thu Oct 23 16:45:37 2025 +0200 net: bridge: Flush multicast groups when snooping is disabled [ Upstream commit 68800bbf583f26f71491141e4b3c8582f9cfcbde ] When forwarding multicast packets, the bridge takes MDB into account when IGMP / MLD snooping is enabled. Currently, when snooping is disabled, the MDB is retained, even though it is not used anymore. At the same time, during the time that snooping is disabled, the IGMP / MLD control packets are obviously ignored, and after the snooping is reenabled, the administrator has to assume it is out of sync. In particular, missed join and leave messages would lead to traffic being forwarded to wrong interfaces. Keeping the MDB entries around thus serves no purpose, and just takes memory. Note also that disabling per-VLAN snooping does actually flush the relevant MDB entries. This patch flushes non-permanent MDB entries as global snooping is disabled. Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/5e992df1bb93b88e19c0ea5819e23b669e3dde5d.1761228273.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Stable-dep-of: 4df78ff02629 ("bridge: mcast: Fix a possible use-after-free when removing a bridge port") Signed-off-by: Sasha Levin commit 92060ab1c5115674cf319175550f85f68405121f Author: Guangshuo Li Date: Thu May 14 19:38:34 2026 +0800 RDMA/rtrs: Fix use-after-free in path file creation cleanup [ Upstream commit 5b74373390113fba798a76b483837029ab010fef ] In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. Fixes: ae4c81644e91 ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path") Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit a4074f48af14f6cae0cfae7b7d8958cb5f41944a Author: Rafael J. Wysocki Date: Tue May 12 17:16:22 2026 +0200 platform/x86: intel-vbtn: Check ACPI_HANDLE() against NULL [ Upstream commit a9f305c5a355efeb240d406d378491d9eec02d07 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-vbtn driver. Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 94c4b0dd6202a717b847bf5aef346e33ed196dc4 Author: Rafael J. Wysocki Date: Tue May 12 17:13:28 2026 +0200 platform/x86: intel-hid: Check ACPI_HANDLE() against NULL [ Upstream commit 5c69e090ae5dd93d910f70db0796357080707d26 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-hid driver. Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 0aa48a0a71aadbd01eaf9b2086999afd2a656b66 Author: Rafael J. Wysocki Date: Tue May 12 17:12:40 2026 +0200 platform/x86: hp_accel: Check ACPI_COMPANION() against NULL [ Upstream commit abfbe5ee8ae89f1f5449790423d5dd3e423545bd ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 hp_accel driver. Fixes: 8ebcb6c94c71 ("platform/x86: hp_accel: Convert to be a platform driver") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 38a474dda753d5ee24d36dbed245f076d1deafd0 Author: Rafael J. Wysocki Date: Tue May 12 17:11:49 2026 +0200 platform/x86: adv_swbutton: Check ACPI_HANDLE() against NULL [ Upstream commit e7a9a6ea40e352cd7977f6a8c80bdeadf65ad838 ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 adv_swbutton driver. Fixes: 3d904005f686 ("platform/x86: add support for Advantech software defined button") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 10c0896f0147319ba274c0026d1af2eac4a68694 Author: Oliver White Date: Thu Apr 9 15:43:47 2026 +1200 platform/surface: aggregator_registry: omit battery & AC nodes on Surface Laptop 7 [ Upstream commit 0488073a6c84571dd3cffe581a4a73a5fceb099d ] Surface Laptop 7 exposes battery and AC status via Qualcomm PMIC GLINK qcom_battmgr. Registering the standard SSAM battery and AC client devices on this platform causes duplicate power-supply devices to appear. Drop the SSAM battery and AC nodes from the Surface Laptop 7 registry group so that only the qcom_battmgr power supplies are instantiated. Fixes: b27622f13172 ("platform/surface: Add OF support") Signed-off-by: Oliver White Link: https://patch.msgid.link/20260409034347.17381-1-oliverjwhite07@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 6180a06bbc99fd9114b8db4be6c4d46e40f046ef Author: Erni Sri Satya Vennela Date: Thu May 14 12:41:51 2026 -0700 net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer [ Upstream commit 35f0f0a2536a4d604b4dbad92c85c4a8fdebb870 ] In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Erni Sri Satya Vennela Link: https://patch.msgid.link/20260514194156.466823-1-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 0692849346451ff262ee8da1e30642c9375cc9df Author: Daniel Golle Date: Thu May 14 15:04:35 2026 +0100 net: dsa: mt7530: preserve VLAN tags on trapped link-local frames [ Upstream commit 3ac85bcfd404b588298c95c6fba8aad4ad334f57 ] The BPC, RGAC1 and RGAC2 registers control the handling of link-local frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are correctly trapped to the CPU port, but the egress VLAN tag attribute was set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any VLAN tags from trapped frames before they reach the CPU. This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer Delay Requests) to arrive at the CPU without their VLAN tag, so they are delivered to the base network interface instead of the VLAN sub-interface. The DSA local_termination selftest confirms this: all link-local protocol tests on VLAN upper interfaces fail. Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default) so that the switch does not modify VLAN tags in trapped frames. This way VLAN-tagged frames retain their original tag and are delivered to the correct VLAN sub-interface, matching the behavior of non-trapped frames which pass through without VLAN tag modification. Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames") Signed-off-by: Daniel Golle Acked-by: Chester A. Unal Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit eb13c943cb94b0b3e573d2879c9f0d54aaaa02bc Author: Daniel Golle Date: Thu May 14 15:04:21 2026 +0100 net: dsa: mt7530: fix FDB entries not aging out with short timeout [ Upstream commit e824e40d0e841fab66ab7897d6c7b14dc81c66a7 ] The DSA forwarding selftests bridge_vlan_aware.sh and bridge_vlan_unaware.sh configure the bridge with ageing_time set to LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run learning_test() in lib.sh, which expects a learned FDB entry to be removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry persisted past the deadline and the "Found FDB record when should not" assertion failed. With msecs=10000, the algorithm in mt7530_set_ageing_time() finds AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the search from tmp_age_count=0). The per-entry aging counter is initialized to AGE_CNT when a MAC address is learned, so with AGE_CNT=0 new entries start with a counter value of 0, which the hardware treats as "already aged" and never removes, effectively disabling aging. Fix this by starting the search from tmp_age_count=1 to ensure entries always have a non-zero initial aging counter. For a 10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead: the timer ticks every 5 seconds and entries are removed after 2 ticks. Starting the search at AGE_CNT=1 raises the minimum representable ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time of 1 second would now make the loop fall through without setting age_count and age_unit, leaving them uninitialized when written to the MT7530_AAC hardware register. Set ds->ageing_time_min and ds->ageing_time_max so the DSA core validates the range before the callback is invoked, and drop the now-redundant range check from mt7530_set_ageing_time(). Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 4db1b0863fa36cf922cd4343c3632008fc7bfd30 Author: Viktor Jägersküpper Date: Fri May 15 23:58:45 2026 +0200 kbuild: pacman-pkg: make "rc" releases adhere to pacman versioning scheme [ Upstream commit 202550713128da20d9381d6d2dc0f6b73839f434 ] The package versioning scheme does not enable smooth upgrades from "rc" releases to the corresponding stable releases (e.g. 7.0.0-rc7 -> 7.0.0) because pacman considers that a downgrade due to the underscore in pkgver (e.g. 7.0.0_rc7), see e.g. vercmp(8) for an explanation of the package version comparison used by pacman. Package versions which are derived from said releases (e.g. built from git revisions) are similarly affected. Fix this by modifying pkgver in order to remove the hyphen from kernel versions containing "-rcN", where N is a non-negative integer. Acked-by: Thomas Weißschuh Signed-off-by: Viktor Jägersküpper Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Link: https://patch.msgid.link/20260515215913.92481-1-viktor_jaegerskuepper@freenet.de Fixes: c8578539deba ("kbuild: add script and target to generate pacman package") Signed-off-by: Nicolas Schier Signed-off-by: Sasha Levin commit bfe6b5d9ca35c776b9c1a7191bab24698e1e3d4d Author: Ankit Nautiyal Date: Mon May 11 18:02:15 2026 +0530 drm/i915/dp: Fix readback for target_rr in Adaptive Sync SDP [ Upstream commit f87abd0c6604fb6cc31cc86fc7ccc6a576924352 ] Correct the bit-shift logic to properly readback the 10 bit target_rr from DB3 and DB4. v2: Align the style with readback for vtotal. (Ville) Fixes: 12ea89291603 ("drm/i915/dp: Add Read/Write support for Adaptive Sync SDP") Cc: Mitul Golani Cc: Ankit Nautiyal Signed-off-by: Ankit Nautiyal Reviewed-by: Ville Syrjälä Link: https://patch.msgid.link/20260511123218.1589830-2-ankit.k.nautiyal@intel.com (cherry picked from commit f7abc4af2b19240a145a221461dfe756cc01d74a) Signed-off-by: Tvrtko Ursulin Signed-off-by: Sasha Levin commit 01e1a871343870e9ea8f420a9eed3c1718d0b8b3 Author: Grzegorz Nitka Date: Fri May 15 11:24:11 2026 -0700 ice: ptp: serialize E825 PHY timer start with PTP lock [ Upstream commit 781ff8f2d575a794a2a4f11605288ae06757f5eb ] ice_start_phy_timer_eth56g() programs TIMETUS registers and issues INIT_INCVAL without holding the global PTP semaphore. This allows concurrent PTP command paths to interleave with PHY timer start, which can make the sequence fail and leave timer initialization inconsistent. Take the PTP lock around TIMETUS registers programming and INIT_INCVAL command execution, and make sure the lock is released on all error paths. Keep the subsequent sync step outside of this critical section, since ice_sync_phy_timer_eth56g() takes the same semaphore internally. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 17c9e95049741fab27835765ce2f41d7c9fa7316 Author: Matthew Leach Date: Fri Apr 24 10:50:35 2026 +0100 wifi: ath11k: fix peer resolution on rx path when peer_id=0 [ Upstream commit 2a2451a34afdf563b3102d36a4b6cf335cf813e2 ] It has been observed that on certain chipsets a peer can be assigned peer_id=0. For reception of non-aggregated MPDUs this is fine as ath11k_dp_rx_h_find_peer() has a fallback case where it locates the peer based upon the source MAC address. On an aggregated link, the mpdu_start header is only populated by hardware on the first sub-MSDU. This causes the peer resolution to be skipped for the subsequent MSDUs and the encryption type of these frames to be set to an incorrect value, resulting in these MSDUs being dropped by ieee80211. ath11k_pci 0000:03:00.0: data rx skb 000000002f4b704d len 1534 peer xx:xx:xx:xx:xx:xx 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 1 last_msdu 0 ath11k_pci 0000:03:00.0: data rx skb 0000000038acd580 len 1534 peer (null) 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d00 fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 0 last_msdu 1 Remove the null peer_id checks in ath11k_dp_rx_h_find_peer() and ath11k_hal_rx_parse_mon_status_tlv(), allowing peers with an assigned ID of 0 to be resolved. Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9 Fixes: 2167fa606c0f ("ath11k: Add support for RX decapsulation offload") Reviewed-by: Baochen Qiang Signed-off-by: Matthew Leach Reviewed-by: P Praneesh Link: https://patch.msgid.link/20260424-ath11k-null-peerid-workaround-v4-1-252b224d3cf6@collabora.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit c57bb1340a9af617f55d3c731c6331be4024c7c0 Author: Mohanram Meenakshisundaram Date: Thu May 14 23:19:18 2026 +0530 drm/xe/pf: Fix CFI failure in debugfs access [ Upstream commit 96bf49b526e2d03a2b7f6e861925a08f46ed0d28 ] Reading debugfs file (/sys/kernel/debug/dri/0/gt*/pf/adverse_events) with CFI (Control Flow Integrity) enabled, the kernel panics at xe_gt_debugfs_simple_show+0x82/0xc0. xe_gt_debugfs_simple_show() declare a function pointer expecting int return type, but xe_gt_sriov_pf_monitor_print_events() is void return type, leading to CFI failure and kernel panic. [507620.973657] CFI failure at xe_gt_debugfs_simple_show+0x82/0xc0 [xe] (target: xe_gt_sriov_pf_monitor_print_events+0x0/0x130 [xe]; expected type: 0xd72c7139) Fix xe_gt_sriov_pf_monitor_print_events() function by updating to return an int type. Fixes: 1c99d3d3edab ("drm/xe/pf: Expose PF monitor details via debugfs") Signed-off-by: Mohanram Meenakshisundaram Reviewed-by: Michal Wajdeczko Signed-off-by: Michal Wajdeczko Link: https://patch.msgid.link/20260514174918.1556357-2-mohanram.meenakshisundaram@intel.com (cherry picked from commit ff1d386a8359746d9699ac30336e3b0684c68958) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit a7760d092a5ad5f019cd45237a179531010f7b73 Author: Michal Wajdeczko Date: Thu May 14 17:57:26 2026 +0200 drm/xe/vf: Fix signature of print functions [ Upstream commit 9bb2f1d7e6e58b8e434ddc2048c661bf87ccdf2a ] We have plugged-in existing VF print functions into our GT debugfs show helper as-is, but we missed that the helper expects functions to return int, while they were defined as void. This can lead to errors being reported when CFI is enabled. Fixes: 63d8cb8fe3dd ("drm/xe/vf: Expose SR-IOV VF attributes to GT debugfs") Signed-off-by: Michal Wajdeczko Cc: Mohanram Meenakshisundaram Reviewed-by: Shuicheng Lin Link: https://patch.msgid.link/20260514155726.7165-1-michal.wajdeczko@intel.com (cherry picked from commit 314e31c9a8a1c421ee4f7f755b9348aefbbca090) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit 7cb975fcd4777e7bad688f66aa0c10c16dd8276b Author: Shuicheng Lin Date: Mon May 11 15:41:34 2026 +0000 drm/xe/gsc: Fix double-free of managed BO in error path [ Upstream commit d3ded53fab90996e7d94a39049e11962dd066725 ] The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. Fixes: 2e5d47fe7839 ("drm/xe/uc: Use managed bo for HuC and GSC objects") Reviewed-by: Daniele Ceraolo Spurio Assisted-by: Claude:claude-opus-4.6 Link: https://patch.msgid.link/20260511154134.223696-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin (cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) Signed-off-by: Rodrigo Vivi Signed-off-by: Sasha Levin commit 1ef79be774706dddcfcace0331fa7ff32a73c73e Author: Dmitry Baryshkov Date: Sat May 16 14:53:45 2026 +0300 drm/msm/snapshot: fix dumping of the unaligned regions [ Upstream commit 76824d2467feb1828b745d6add2541918d7be3da ] The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reported-by: Salendarsingh Gaud Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/725449/ Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit b1e0945d03dbf99ae1df5d98d250bc3cbcbebcf1 Author: Felix Gu Date: Sun May 10 01:55:37 2026 +0800 spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache() [ Upstream commit 496ba79b9496b8b3747cbc764ebd33ee7325e806 ] When DMA read times out in mtk_snand_read_page_cache(), the original code erroneously jumped to cleanup label which skips DMA unmapping and ECC disable, causing a resource leak. Fixes: 764f1b748164 ("spi: add driver for MTK SPI NAND Flash Interface") Signed-off-by: Felix Gu Link: https://patch.msgid.link/20260510-snfi-v1-1-bc375cf1af8e@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 14e110a7ab06a90678e5a29ccbda629fbe6543e1 Author: Boris Burkov Date: Mon May 11 19:53:46 2026 -0700 btrfs: fix squota accounting during enable generation [ Upstream commit d7c600554816b8ef70adffe078a0e360c055d82b ] The first transaction that enables squotas is special and a bit tricky. We have to set BTRFS_FS_QUOTA_ENABLED after the transaction to avoid a deadlock, so any delayed refs that run before we set the bit are not squota accounted. For data this is fine, we don't get an owner_ref, so there is no real harm, it's as if the extent predated squotas. However for metadata, the tree block will have gen == enable_gen so when we free it later, we will decrement the squota accounting, which can result in an underflow. Before it is freed, btrfs check shows errors, as we have mismatched usage between the node generations/owners and the squota values. There are two angles to this fix: 1. For extents that come in delayed_refs that run during the enable_gen transaction, we must actually set enable_gen to the *next* transaction. That is the first transaction that we can really properly account in any way. 2. For extents that come in between the end of our transaction handle and the time we set the BTRFS_FS_QUOTA_ENABLED bit, we need an additional bit, BTRFS_FS_SQUOTA_ENABLING which only affects recording squota deltas, so we do pick up those extents. Otherwise, we would miss them, even for enable_gen + 1. Fixes: bd7c1ea3a302 ("btrfs: qgroup: check generation when recording simple quota delta") Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 24703f6a757623d73a4cc5d71d5126a2425f2f6a Author: Jens Axboe Date: Fri May 15 10:19:09 2026 -0600 io_uring/net: punt IORING_OP_BIND async if it needs file create [ Upstream commit ccd25890f73c082fe2657ed227b497d6ac5fdc40 ] For two reasons: 1) An opcode cannot block inside io_uring_enter() doing submissions, as it'll stall the submission side pipeline. 2) Ending up in sb_start_write() -> __sb_start_write() -> percpu_down_read_freezable() introduces a new lockdep edge, which it correctly complains about. Check if the socket type is AF_UNIX and has a non-empty pathname. If it does, mark it REQ_F_FORCE_ASYNC to punt the submission to io-wq rather than attempt to do it inline. Fixes: 7481fd93fa0a ("io_uring: Introduce IORING_OP_BIND") Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit d6e06ee555fd6a96942bb9815ac9a3a11368585e Author: Robertus Diawan Chris Date: Fri May 8 10:39:14 2026 +0700 ALSA: scarlett2: Add missing error check when initialise Autogain Status [ Upstream commit c0e4fffc0f474b7ed10adee4ab2bc1a66d36fc72 ] When initialise new control with scarlett2_add_new_ctl() function for Autogain Status, scarlett2_add_new_ctl() might throw an error. So, add error check after initialise new control for Autogain Status. This is reported by Coverity Scan with CID 1598781 as UNUSED_VALUE. Fixes: 0a995e38dc44 ("ALSA: scarlett2: Add support for software-controllable input gain") Signed-off-by: Robertus Diawan Chris Link: https://patch.msgid.link/20260508033914.111596-1-robertusdchris@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 5886342361c8f03d8e1b4c8f62e9eb28f18dc8c8 Author: Mike Christie Date: Mon May 11 12:53:17 2026 -0500 scsi: sd: Fix return code handling in sd_spinup_disk() [ Upstream commit 6ea68a8dc7d2711504d944811981a5304af7d7a9 ] As found by smatch-ci, scsi_execute_cmd() can return negative or positve values so we should use a int instead of unsigned int. Fixes: b4d0c33a32c3 ("scsi: sd: Fix sshdr use in sd_spinup_disk") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-scsi/agFbI7E6JQwd3wGW@stanley.mountain/T/#u Signed-off-by: Mike Christie Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260511175317.114007-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit c521c30d59c8f3bfe70d723e158dadfd325a1c4d Author: Jeroen Massar Date: Wed May 13 09:33:02 2026 +0300 net/mlx5: Do not restore destination-less TC rules [ Upstream commit 8d0a5af8b1ba598e7340761729801624e7a9330e ] After IPsec policy/state TX rules are added, any TC flow rule, which forwards packets to uplink, is modified to forward to IPsec TX tables. As these tables are destroyed dynamically, whenever there is no reference to them, the destinations of this kind of rules must be restored to uplink, unless there is no destination for that rule. The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not have a destination port, and thus out_count = 0. At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests we call mlx5_eswitch_restore_ipsec_rule but as the above types do not have a destination we get an underflow of out_count, as the port is passed, which is esw_attr->out_count - 1. This change avoids calling mlx5_eswitch_restore_ipsec_rule when there are no output destinations and thus avoids the underflow. Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jeroen Massar Reviewed-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4dbca4a7ee5acce30e0cf47c6797a44f9ab1ba85 Author: Chuck Lever Date: Wed May 13 08:58:25 2026 -0400 tls: Preserve sk_err across recvmsg() when data has been copied [ Upstream commit f508262ae9f21fe0e6c0749948b9dc7dd5a62a70 ] The sk_err check in tls_rx_rec_wait() consumes the error via sock_error(), which clears sk_err atomically. When the caller (tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already has bytes copied to userspace, it returns those bytes and discards the error from this call. sk_err is now zero on the socket, so the next read syscall observes only RCV_SHUTDOWN and reports a clean EOF instead of the actual error (typically -ECONNRESET). The race is reachable when tls_read_flush_backlog()'s periodic sk_flush_backlog() triggers tcp_reset() in the middle of a multi-record read. Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is false, consume sk_err via sock_error() as before. When has_copied is true, report the error from READ_ONCE() but leave sk_err set: the caller returns the byte count and discards the err from this call, and the next read syscall surfaces the preserved sk_err. This mirrors the tcp_recvmsg() preserve-and-surface pattern. The decrypt-abort path is unaffected: tls_err_abort() raises sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing on the caller's return path consumes it, so the EBADMSG surfaces on the next read. tls_sw_splice_read() passes has_copied=false: it processes one record per call, so no bytes have been copied within the function when tls_rx_rec_wait() runs. A reset that arrives between iterations of splice_direct_to_actor() (the sendfile() path) is still consumed by sock_error() in the later call, and the outer loop returns the prior iterations' byte count and drops the error. tcp_splice_read() exhibits the same pattern at the iteration boundary; addressing it belongs at the splice_direct_to_actor() layer and is out of scope here. Fixes: c46b01839f7a ("tls: rx: periodically flush socket backlog") Suggested-by: Jakub Kicinski Signed-off-by: Chuck Lever Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0cf96eb3edb380a4999efc5a461d0af8ca445a0d Author: Juergen Gross Date: Tue May 5 12:24:17 2026 +0200 x86/xen: Fix xen_e820_swap_entry_with_ram() [ Upstream commit 28e03f78e69cf6628b81f24777799778528a84c1 ] When swapping a not page-aligned E820 map entry with RAM, the start address of the modified entry is calculated wrong (the offset into the page is subtracted instead of being added to the page address). Fixes: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory") Reported-by: Jan Beulich Reviewed-by: Jan Beulich Signed-off-by: Juergen Gross Message-ID: <20260505102417.208138-1-jgross@suse.com> Signed-off-by: Sasha Levin commit cfda0bf17445c57f5cc834ed465848c63fa6fbd6 Author: Sven Schuchmann Date: Tue May 12 09:19:47 2026 +0200 net: phy: DP83TC811: add reading of abilities [ Upstream commit c78bdba7b9666020c0832150a4fc4c0aebc7c6ac ] At this time the driver is not listing any speeds it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT for DP83TC811. Add the missing call for phylib to read the abilities. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Suggested-by: Andrew Lunn Signed-off-by: Sven Schuchmann Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de [pabeni@redhat.com: dropped revision history] Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 929b1548e63ac72e104c07d8ee8cbbeeba2fa89a Author: Jakub Kicinski Date: Mon May 11 10:49:18 2026 -0700 net: tls: prevent chain-after-chain in plain text SG [ Upstream commit ff26a0e8377dec07e4a7230db7675bed1b9a6d03 ] Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective. Reported-by: Sashiko Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 66339b71f105e6f83e0da3b9583d95077534fe1d Author: Jakub Kicinski Date: Mon May 11 10:49:17 2026 -0700 net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring [ Upstream commit 285943c6e7ca309bbea84b253745154241d9788a ] When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina). Reported-by: 钱一铭 Fixes: 9aaaa56845a0 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining") Signed-off-by: Jakub Kicinski Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 53eb7bd09aace72fa17510d80e0caf5ca058c231 Author: Xiang Mei Date: Sun May 10 23:21:38 2026 -0700 net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot [ Upstream commit 277740023def559a4a2ddc3e8e784ee37a0f16a9 ] On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match. Fixes: a7c9c5f4af7f ("net/smc: CLC accept / confirm V2") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 72d8d1c36452a4d3ee134b1da48de7518c1329f9 Author: Sayali Patil Date: Wed May 13 13:44:13 2026 +0530 powerpc/time: Remove redundant preempt_disable|enable() calls from arch_irq_work_raise() [ Upstream commit 31467b23823ffec1f6fff407f8e3ca9af8b7491a ] A kernel panic is observed when handling machine check exceptions from real mode. BUG: Unable to handle kernel data access on read at 0xc00000006be21300 Oops: Kernel access of bad area, sig: 11 [#1] MSR: 8000000000001003 CR: 88222248 XER: 00000005 CFAR: c00000000003ffc4 DAR: c00000006be21300 DSISR: 40000000 IRQMASK: 0 NIP [c000000000029e40] arch_irq_work_raise+0x10/0x70 LR [c00000000003ffc8] machine_check_queue_event+0xa8/0x150 Call Trace: [c0000000179d3c70] [c00000000003ff64] machine_check_queue_event+0x44/0x150 [c0000000179d3d30] [c0000000000084e0] machine_check_early_common+0x1f0/0x2c0 The crash occurs because arch_irq_work_raise() calls preempt_disable() from machine check exception (MCE) handlers running in real mode. In this context, accessing the preempt_count can fault, leading to the panic. The preempt_disable()/preempt_enable() pair in arch_irq_work_raise() was originally added by commit 0fe1ac48bef0 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") to avoid races while raising irq work from exception context. Later, commit 471ba0e686cb ("irq_work: Do not raise an IPI when queueing work on the local CPU") added preemption protection in irq_work_queue() path, while commit 20b876918c06 ("irq_work: Use per cpu atomics instead of regular atomics") added equivalent protection in irq_work_queue_on() before reaching arch_irq_work_raise(): irq_work_queue() / irq_work_queue_on() -> preempt_disable() -> __irq_work_queue_local() -> irq_work_raise() -> arch_irq_work_raise() As a result, callers other than mce_irq_work_raise() already execute with preemption disabled, making the additional preempt_disable()/preempt_enable() pair in arch_irq_work_raise() redundant. The arch_irq_work_raise() function executes in NMI context when called from MCE handler. Hence we will not be preempted or scheduled out since we are in NMI context with MSR[EE]=0. Therefore, it is safe to remove the preempt_disable()/preempt_enable() calls from here. Remove it to avoid accessing preempt_count from real mode context. Fixes: cc15ff327569 ("powerpc/mce: Avoid using irq_work_queue() in realmode") Suggested-by: Mahesh Salgaonkar Acked-by: Shrikanth Hegde Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Sayali Patil [Maddy: Fixed the commit title] Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260513081413.222490-1-sayalip@linux.ibm.com Signed-off-by: Sasha Levin commit 3457807aeb88077712f0a7cb65c3ca5120773d75 Author: Mikko Perttunen Date: Tue Apr 21 13:02:38 2026 +0900 drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN [ Upstream commit 55e0f0d1c1a4ee1e46da7da4d443eb3044fb3851 ] Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Mikko Perttunen Patchwork: https://patchwork.freedesktop.org/patch/719685/ Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com> Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 9f8274749d9010a1a72f97e547b7eb9ebb82345b Author: Dmitry Baryshkov Date: Tue Apr 28 20:21:38 2026 +0300 drm/msm/dsi: don't dump registers past the mapped region [ Upstream commit 5b49a46baa853b26dbefa65c6c75dd9ff69f63d4 ] On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Fixes: bac2c6a62ed9 ("drm/msm: get rid of msm_iomap_size") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/721747/ Link: https://lore.kernel.org/r/20260428-msm-fix-dsi-dump-v1-1-5d4cb5ccfac7@oss.qualcomm.com Signed-off-by: Sasha Levin commit ae6c884fc03ca2adc0f6fb4205b8638691159c9f Author: Chenguang Zhao Date: Mon May 11 09:43:43 2026 +0800 ethtool: fix ethnl_bitmap32_not_zero() bit interval semantics [ Upstream commit 3d042592ebd4c7e44974d556de0b727cb7db4dab ] ethnl_bitmap32_not_zero() should return true if some bit in [start, end) is set: - Fix inverted memchr_inv() sense: return true when the scan finds a non-zero byte, not when the middle words are all zero. - Return false for an empty interval (end <= start). - When end is 32-bit aligned, indices in [start, end) do not include any bits from map[end_word]; return false after earlier checks found no non-zero data. Fixes: 10b518d4e6dd ("ethtool: netlink bitset handling") Signed-off-by: Chenguang Zhao Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b706d6d76a2a2793fe5ad0fbc2a75b6a460094ef Author: Xiang Mei Date: Sun May 10 15:26:40 2026 -0700 net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint [ Upstream commit 7bf563badd37cb796df5477d2b78bb64148a1268 ] The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname) conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on these paths already handles this (e.g. !conn->lnk in SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first sendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64 The faulting address 0x3e0 is offsetof(struct smc_link, ibname), confirming the NULL ->lnk deref. Enabling the tracepoint requires root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has no capability check, and SMC-D negotiation needs no admin step on s390 or on x86 with the loopback ISM device loaded. Log an empty device name for SMC-D instead of dereferencing NULL. Fixes: aff3083f10bf ("net/smc: Introduce tracepoints for tx and rx msg") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Dust Li Reviewed-by: Sidraya Jayagond Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8dd6edbe26770df147136c3f2ac976c873b82650 Author: Zack McKevitt Date: Thu Apr 30 12:39:01 2026 -0700 accel/qaic: Add overflow check to remap_pfn_range during mmap [ Upstream commit aa16b2bc0f02709919e2435f531406531e5bcc69 ] The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. Reported-by: Lukas Maar Fixes: ff13be830333 ("accel/qaic: Add datapath") Reviewed-by: Karol Wachowski Signed-off-by: Zack McKevitt Reviewed-by: Jeff Hugo [jhugo: fix braces from checkpatch --strict] Signed-off-by: Jeff Hugo Link: https://patch.msgid.link/20260430193858.1178641-1-zachary.mckevitt@oss.qualcomm.com Signed-off-by: Sasha Levin commit 77c059f41e9395793917d067476f549a911d77d3 Author: Sungwoo Kim Date: Tue May 12 01:09:29 2026 -0400 block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() [ Upstream commit 8582792cf23b3d94674d4d838f7cde9a28d0fcaf ] pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6 Fixes: 492c5d455969 ("block: bio-integrity: directly map user buffers") Acked-by: Chao Shi Acked-by: Weidong Zhu Acked-by: Dave Tian Signed-off-by: Sungwoo Kim Tested-by: Shin'ichiro Kawasaki Link: https://github.com/linux-blktests/blktests/pull/244 Link: https://patch.msgid.link/20260512050929.541397-2-iam@sung-woo.kim Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 539a1261d2280c601f3bacbf3c6efdf31d4e0adc Author: Keith Busch Date: Wed Sep 3 12:33:16 2025 -0700 blk-integrity: enable p2p source and destination [ Upstream commit 05ceea5d3ec9a1b1d6858ffd4739fdb0ed1b8eaf ] Set the extraction flags to allow p2p pages for the metadata buffer if the block device allows it. Similar to data payloads, ensure the bio does not use merging if we see a p2p page. Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Signed-off-by: Keith Busch Signed-off-by: Jens Axboe Stable-dep-of: 8582792cf23b ("block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()") Signed-off-by: Sasha Levin commit 9264162d1a86725f6e9da6d27c331e27a4949b27 Author: Keith Busch Date: Wed Aug 27 07:12:57 2025 -0700 blk-integrity: use simpler alignment check [ Upstream commit 69d7ed5b9ef661230264bfa0db4c96fa25b8efa4 ] We're checking length and addresses against the same alignment value, so use the more simple iterator check. Signed-off-by: Keith Busch Reviewed-by: Hannes Reinecke Reviewed-by: Martin K. Petersen Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe Stable-dep-of: 8582792cf23b ("block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()") Signed-off-by: Sasha Levin commit 5cb13531de0ecef3600855ef8bf788be8cb3b90b Author: Caleb Sander Mateos Date: Tue Jun 3 12:31:32 2025 -0600 block: drop direction param from bio_integrity_copy_user() [ Upstream commit c09a8b00f850d3ca0af998bff1fac4a3f6d11768 ] direction is determined from bio, which is already passed in. Compute op_is_write(bio_op(bio)) directly instead of converting it to an iter direction and back to a bool. Signed-off-by: Caleb Sander Mateos Reviewed-by: Keith Busch Reviewed-by: Anuj Gupta Link: https://lore.kernel.org/r/20250603183133.1178062-1-csander@purestorage.com Signed-off-by: Jens Axboe Stable-dep-of: 8582792cf23b ("block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()") Signed-off-by: Sasha Levin commit abc5bb800336261fe27541f09a8a3861e2cf9235 Author: Anuj Gupta Date: Thu Nov 28 16:52:33 2024 +0530 block: modify bio_integrity_map_user to accept iov_iter as argument [ Upstream commit fe8f4ca7107e968b0eb7328155c8811f2a19424a ] This patch refactors bio_integrity_map_user to accept iov_iter as argument. This is a prep patch. Signed-off-by: Anuj Gupta Signed-off-by: Kanchan Joshi Reviewed-by: Christoph Hellwig Reviewed-by: Keith Busch Link: https://lore.kernel.org/r/20241128112240.8867-4-anuj20.g@samsung.com Signed-off-by: Jens Axboe Stable-dep-of: 8582792cf23b ("block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()") Signed-off-by: Sasha Levin commit d5496ddefe699a3b61ecad2a8f75330279291154 Author: Lukas Bulwahn Date: Thu Feb 5 09:11:31 2026 +0100 HID: quirks: really enable the intended work around for appledisplay [ Upstream commit 5f90dcfa8dc32a488581b78e575cdd7808ba5c78 ] Commit c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") intends to add a quirk for kernels built with Apple Cinema Display support, but it refers to the non-existing config option CONFIG_APPLEDISPLAY, whereas the config option for Apple Cinema Display support is named CONFIG_USB_APPLEDISPLAY. Refer to the intended config option CONFIG_USB_APPLEDISPLAY in the ifdef directive. Fixes: c7fabe4ad921 ("HID: quirks: work around VID/PID conflict for appledisplay") Signed-off-by: Lukas Bulwahn Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 53a01bcc0242590eda4c452a5bd996f62457113b Author: Casey Chen Date: Mon May 11 15:22:30 2026 -0600 block: recompute nr_integrity_segments in blk_insert_cloned_request [ Upstream commit 2c6e6a18a37b905cb584eb0dda3ae482162a81ca ] blk_insert_cloned_request() already recomputes nr_phys_segments against the bottom queue, because "the queue settings related to segment counting may differ from the original queue." The exact same reasoning applies to integrity segments: a stacked driver's underlying queue can have tighter virt_boundary_mask, seg_boundary_mask, or max_segment_size than the top queue, in which case blk_rq_count_integrity_sg() against the bottom queue produces a different count than the cached rq->nr_integrity_segments inherited from the source request by blk_rq_prep_clone(). When the cached count is lower than the bottom queue's actual count, blk_rq_map_integrity_sg() trips BUG_ON(segments > rq->nr_integrity_segments); on dispatch. The same families of stacked setups that motivated the existing nr_phys_segments recompute -- dm-multipath fanning out to nvme-rdma in particular -- can produce this. Mirror the nr_phys_segments handling: when the request carries integrity, recompute nr_integrity_segments against the bottom queue and reject the request if it exceeds the bottom queue's max_integrity_segments. blk_rq_count_integrity_sg() and queue_max_integrity_segments() are both already available via , which blk-mq.c includes. This closes a latent gap in the stacking contract and brings the integrity-segment accounting in line with the existing phys-segment accounting. Fixes: 76c313f658d2 ("blk-integrity: improved sg segment mapping") Signed-off-by: Casey Chen Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260511212230.27511-1-cachen@purestorage.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit d18160c9525c63c203656fefd847e94b538cd4a4 Author: David Carlier Date: Mon May 11 22:51:51 2026 +0100 block: don't overwrite bip_vcnt in bio_integrity_copy_user() [ Upstream commit 637ad3a56a3b889527d1dacea6fea2a8bd648140 ] bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. Fixes: 3991657ae707 ("block: set bip_vcnt correctly") Signed-off-by: David Carlier Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260511215151.346228-1-devnexen@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit b99cf2b6c39380ffe18800b0802877ed2dab8c82 Author: Keith Busch Date: Wed Oct 16 13:13:09 2024 -0700 blk-integrity: remove seed for user mapped buffers [ Upstream commit 133008e84b99e4f5f8cf3d8b768c995732df9406 ] The seed is only used for kernel generation and verification. That doesn't happen for user buffers, so passing the seed around doesn't accomplish anything. Signed-off-by: Keith Busch Reviewed-by: Christoph Hellwig Reviewed-by: Anuj Gupta Reviewed-by: Kanchan Joshi Link: https://lore.kernel.org/r/20241016201309.1090320-1-kbusch@meta.com Signed-off-by: Jens Axboe Stable-dep-of: 637ad3a56a3b ("block: don't overwrite bip_vcnt in bio_integrity_copy_user()") Signed-off-by: Sasha Levin commit 4c6a72aae687e7350093ddfdc5bb7c5612983864 Author: Kang Yang Date: Tue Apr 28 14:17:37 2026 +0800 wifi: ath10k: skip WMI and beacon transmission when device is wedged [ Upstream commit 54a5b38e4396530e5b2f12b54d3844e860ab6784 ] In ath10k_wmi_cmd_send(), the current code detects ATH10K_STATE_WEDGED and sets ret to -ESHUTDOWN, but still proceeds to transmit pending beacons and calls ath10k_wmi_cmd_send_nowait(). This can lead to incorrect behavior, as WMI commands and beacons are still sent after the device has been marked as wedged, and the original -ESHUTDOWN return value may be overwritten by the result of the send path. The wedged state indicates the hardware is already unreliable, and no further interaction with firmware is expected or meaningful in this state. Fix this by skipping beacon transmission and the WMI send path entirely once ATH10K_STATE_WEDGED is detected, ensuring consistent return values and avoiding unnecessary firmware interaction. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Fixes: c256a94d1b1b ("wifi: ath10k: shutdown driver when hardware is unreliable") Signed-off-by: Kang Yang Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260428061737.37-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 03ac1d6780d0c7f6c93ff076f00f173575bd9a34 Author: Nicolas Escande Date: Wed May 6 15:42:40 2026 +0200 wifi: ath11k: fix error path leak in ath11k_tm_cmd_wmi_ftm() [ Upstream commit 7320d6eb861e9913193a7801834c661381756a79 ] This is similar to what was fixed by previous patches. We have a call to ath11k_wmi_cmd_send() which does check the return value, but forgot to free the related skb on error. Fixes: b43310e44edc ("wifi: ath11k: factory test mode support") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-4-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 008955b1348452de25bc19d6e0f0f673d4cb9a3c Author: Nicolas Escande Date: Wed May 6 15:42:38 2026 +0200 wifi: ath11k: fix error path leaks in some WMI WOW calls [ Upstream commit 55dda532bbc261aef495e403c8900c5e2ab5fa34 ] Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. Fixes: 79802b13a492 ("ath11k: implement WoW enable and wakeup commands") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 3ea81ce591edd7f6eea5fbe440c283a0971a46c5 Author: Ethan Nelson-Moore Date: Fri May 8 19:37:28 2026 -0700 net: ethernet: cs89x0: remove stale CONFIG_MACH_MX31ADS reference [ Upstream commit 36a8d04a8293afcb9304cf0cd3741f67698f2a1a ] The legacy ARM board file for MACH_MX31ADS was removed in commit c93197b0041d ("ARM: imx: Remove i.MX31 board files"), but a reference to it remained in the cs89x0 driver. Drop this unused code. Signed-off-by: Ethan Nelson-Moore Fixes: c93197b0041d ("ARM: imx: Remove i.MX31 board files") Link: https://patch.msgid.link/20260509023732.42256-1-enelsonmoore@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 7123cf481e21b54eb6adc4cb0d8dc2876aeaee41 Author: Linus Walleij Date: Sat May 9 00:13:38 2026 +0200 net: ethernet: cortina: Carry over frag counter [ Upstream commit ebd8ec2b309e3a447851b456ccaf8fb39f3661e7 ] The gmac_rx() NAPI poll function assembles packets in an SKB from a ring buffer. If the ring buffer gets completely emptied during a poll cycle, we exit gmac_rx(), but the packet is not yet completely assembled in the SKB, yet the fragment counter frag_nr is reset to zero on the next invocation. Solve this by making the RX fragment counter a part of the port struct, and carry it over between invocations. Reset the fragment counter only right after calling napi_gro_frags(), on error (after calling napi_free_frags()) or if stopping the port. Reset it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-3-6c5d20ddc35b@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit aecf7d3d1763b7654a8b69aa9d20fa1fc19c1dc2 Author: Andreas Haarmann-Thiemann Date: Tue May 5 23:52:17 2026 +0200 net: ethernet: cortina: Drop half-assembled SKB [ Upstream commit b266bacba796ff5c4dcd2ae2fc08aacf7ab39153 ] In gmac_rx() (drivers/net/ethernet/cortina/gemini.c), when gmac_get_queue_page() returns NULL for the second page of a multi-page fragment, the driver logs an error and continues — but does not free the partially assembled skb that was being assembled via napi_build_skb() / napi_get_frags(). Free the in-progress partially assembled skb via napi_free_frags() and increase the number of dropped frames appropriately and assign the skb pointer NULL to make sure it is not lingering around, matching the pattern already used elsewhere in the driver. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Andreas Haarmann-Thiemann Signed-off-by: Linus Walleij Reviewed-by: Alexander Lobakin Link: https://patch.msgid.link/20260505-gemini-ethernet-fix-v2-1-997c31d06079@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 72158ea185b27afae163949b0e86164cb6b64e55 Author: Linus Walleij Date: Sat May 9 00:13:37 2026 +0200 net: ethernet: cortina: Make RX SKB per-port [ Upstream commit 06937db21ee311ed07eba47954447245041a982d ] The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review. Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-2-6c5d20ddc35b@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 7f040243c74d72b45b22246c7d9e621fbeab44ac Author: David Howells Date: Tue May 12 13:33:58 2026 +0100 netfs: Fix folio->private handling in netfs_perform_write() [ Upstream commit ccde2ac757c713535b224233a296de40efe5212d ] Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-22-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit bf6c3e36159807282058fd5143b6ac91b9c58e5f Author: Matthew Wilcox (Oracle) Date: Sat Oct 5 19:23:05 2024 +0100 netfs: Remove unnecessary references to pages [ Upstream commit e995e8b600260cff3cfaf2607a62be8bdc4aa9c7 ] These places should all use folios instead of pages. Signed-off-by: Matthew Wilcox (Oracle) Link: https://lore.kernel.org/r/20241005182307.3190401-4-willy@infradead.org Signed-off-by: Christian Brauner Stable-dep-of: ccde2ac757c7 ("netfs: Fix folio->private handling in netfs_perform_write()") Signed-off-by: Sasha Levin commit a9a0414baaa4eb410930b8a77d346cfb12b39c41 Author: Matthew Wilcox (Oracle) Date: Sat Oct 5 19:23:04 2024 +0100 netfs: Fix a few minor bugs in netfs_page_mkwrite() [ Upstream commit c6a90fe7f080d71271b723490454cfda1f81e4b0 ] We can't return with VM_FAULT_SIGBUS | VM_FAULT_LOCKED; the core code will not unlock the folio in this instance. Introduce a new "unlock" error exit to handle this case. Use it to handle the "folio is truncated" check, and change the "writeback interrupted by a fatal signal" to do a NOPAGE exit instead of letting the core code install the folio currently under writeback before killing the process. Signed-off-by: Matthew Wilcox (Oracle) Link: https://lore.kernel.org/r/20241005182307.3190401-3-willy@infradead.org Signed-off-by: Christian Brauner Stable-dep-of: ccde2ac757c7 ("netfs: Fix folio->private handling in netfs_perform_write()") Signed-off-by: Sasha Levin commit f6b2569ae29b666fd15ff2848684c445ba442a39 Author: David Howells Date: Tue May 12 13:33:57 2026 +0100 netfs: Fix partial invalidation of streaming-write folio [ Upstream commit 6d91acc7fb85d33ea58fca9b964a32a453937f4b ] In netfs_invalidate_folio(), if the region of a partial invalidation overlaps the front (but not all) of a dirty write cached in a streaming write page (dirty, but not uptodate, with the dirty region tracked by a netfs_folio struct), the function modifies the dirty region - but incorrectly as it moves the region forward by setting the start to the start, not the end, of the invalidation region. Fix this by setting finfo->dirty_offset to the end of the invalidation region (iend). Fixes: cce6bfa6ca0e ("netfs: Fix trimming of streaming-write folios in netfs_inval_folio()") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-21-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 2a39d49c8d97df8cb8fa80c10859bc1ba7358c6b Author: David Howells Date: Tue May 12 13:33:54 2026 +0100 netfs: Fix early put of sink folio in netfs_read_gaps() [ Upstream commit 3e5dd91b87a8b1450217b56a336bee315f40da7d ] Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Reported-by: Steve French Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-18-dhowells@redhat.com Reviewed-by: Paulo Alcantara (Red Hat) cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 9adf8e47d73d5e3c2fe77dea649dcde350ccd65c Author: David Howells Date: Tue May 12 13:33:53 2026 +0100 netfs: Fix write streaming disablement if fd open O_RDWR [ Upstream commit 70a7b9193bbbfceaab5974de66834c64ccc875dd ] In netfs_perform_write(), "write streaming" (the caching of dirty data in dirty but !uptodate folios) is performed to avoid the need to read data that is just going to get immediately overwritten. However, this is/will be disabled in three circumstances: if the fd is open O_RDWR, if fscache is in use (as we need to round out the blocks for DIO) or if content encryption is enabled (again for rounding out purposes). The idea behind disabling it if the fd is open O_RDWR is that we'd need to flush the write-streaming page before we could read the data, particularly through mmap. But netfs now fills in the gaps if ->read_folio() is called on the page, so that is unnecessary. Further, this doesn't actually work if a separate fd is open for reading. Fix this by removing the check for O_RDWR, thereby allowing streaming writes even when we might read. This caused a number of problems with the generic/522 xfstest, but those are now fixed. Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-17-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 1468f39243ccb155b6d97f9a9932f610d1205d75 Author: David Howells Date: Tue May 12 13:33:51 2026 +0100 netfs: Fix potential deadlock in write-through mode [ Upstream commit b6a4ae1634b3ad2aaa05222e53d36da532852faf ] Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Closes: https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-15-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 20195925c768626dc901a4781a51e508702c88ad Author: David Howells Date: Tue May 12 13:33:50 2026 +0100 netfs: Fix streaming write being overwritten [ Upstream commit 7b4dcf1b9455a6e52ac7478b4057dbe10359576d ] In order to avoid reading whilst writing, netfslib will allow "streaming writes" in which dirty data is stored directly into folios without reading them first. Such folios are marked dirty but may not be marked uptodate. If a folio is entirely written by a streaming write, uptodate will be set, otherwise it will have a netfs_folio struct attached to ->private recording the dirty region. In the event that a partially written streaming write page is to be overwritten entirely by a single write(), netfs_perform_write() will try to copy over it, but doesn't discard the netfs_folio if it succeeds; further, it doesn't correctly handle a partial copy that overwrites some of the dirty data. Fix this by the following: (1) If the folio is successfully overwritten, free the netfs_folio struct before marking the page uptodate. (2) If the copy to the folio partially fails, but short of the dirty data, just ignore the copy. (3) If the copy partially fails and overwrites some of the dirty data, accept the copy, update the netfs_folio struct to record the new data. If the folio is now filled, free the netfs_folio and set uptodate, otherwise return a partial write. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0 0x927c0 write 0x63fb8 0x53c8 0 copy_range 0xb704 0x19b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * write 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0x00000 0x20000 0x9157c read 0x20000 0x20000 0x9157c read 0x40000 0x20000 0x9157c read 0x60000 0x20000 0x9157c read 0x7e1a0 0xcfb9 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-14-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit cfbfc25609bd7a34c45da93db452e438e49af292 Author: David Howells Date: Tue May 12 13:33:49 2026 +0100 netfs: Defer the emission of trace_netfs_folio() [ Upstream commit daeb443b92817021c1234e8eded219e164b7c35d ] Change netfs_perform_write() to keep the netfs_folio trace value in a variable and emit it later to make it easier to choose the value displayed. This is a prerequisite for a subsequent patch. Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-13-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Stable-dep-of: 7b4dcf1b9455 ("netfs: Fix streaming write being overwritten") Signed-off-by: Sasha Levin commit 31ba145faceb378fa01afcb8349e15ea7d95e542 Author: David Howells Date: Tue May 12 13:33:48 2026 +0100 netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone [ Upstream commit 156ac2ec2ee77c44c4eb7439d6d165247ba12247 ] If a streaming write is made, this will leave the relevant modified folio in a not-uptodate, but dirty state with a netfs_folio struct hung off of folio->private indicating the dirty range. Subsequently truncating the file such that the dirty data in the folio is removed, but the first part of the folio theoretically remains will cause the netfs_folio struct to be discarded... but will leave the dirty flag set. If the folio is then read via mmap(), netfs_read_folio() will see that the page is dirty and jump to netfs_read_gaps() to fill in the missing bits. netfs_read_gaps(), however, expects there to be a netfs_folio struct present and can oops because truncate removed it. Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the event that all the dirty data in the folio is erased (as nfs does). Also add some tracepoints to log modifications to a dirty page. This can be reproduced with something like: dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1 umount /xfstest.test mount /xfstest.test xfs_io -c "w 0xbbbf 0xf96c" \ -c "truncate 0xbbbf" \ -c "mmap -r 0xb000 0x11000" \ -c "mr 0xb000 0x11000" \ /xfstest.test/foo with fscaching disabled (otherwise streaming writes are suppressed) and a change to netfs_perform_write() to disallow streaming writes if the fd is open O_RDWR: if (//(file->f_mode & FMODE_READ) || <--- comment this out netfs_is_cache_enabled(ctx)) { It should be reproducible even without this change, but if prevents the above trivial xfs_io command from reproducing it. Note that the initial dd is important: the file must start out sufficiently large that the zero-point logic doesn't just clear the gaps because it knows there's nothing in the file to read yet. Unmounting and mounting is needed to clear the pagecache (there are other ways to do that that may also work). This was initially reproduced with the generic/522 xfstest on some patches that remove the FMODE_READ restriction. Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write") Reported-by: Marc Dionne Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-12-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 96cc3beb2390ba9f9c128c5733c0ccfe450dd4f9 Author: David Howells Date: Tue May 12 13:33:47 2026 +0100 netfs: Fix overrun check in netfs_extract_user_iter() [ Upstream commit 0ef37eef83fad3542ee06db2940433ae1a92b39d ] Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Closes: https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-11-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 51ffb788f074c0a61953086f49008028c1e7b645 Author: Viacheslav Dubeyko Date: Tue May 12 13:33:44 2026 +0100 netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call [ Upstream commit dc7832d05deb4d632e8035e3299e31a3528fa0d0 ] The multiple runs of generic/013 test-case is capable to reproduce a kernel BUG at mm/filemap.c:1504 with probability of 30%. while true; do sudo ./check generic/013 done [ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322 [ 9849.452412] memcg:ffff8881a1915800 [ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX" [ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248 [ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800 [ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) [ 9849.452474] ------------[ cut here ]------------ [ 9849.452476] kernel BUG at mm/filemap.c:1504! [ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full) [ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1 0/2025 [ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000 [ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0 [ 9849.504459] PKRU: 55555554 [ 9849.504626] Call Trace: [ 9849.505242] [ 9849.505379] netfs_write_begin+0x7c8/0x10a0 [ 9849.505877] ? __kasan_check_read+0x11/0x20 [ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10 [ 9849.507178] ceph_write_begin+0x8c/0x1c0 [ 9849.507934] generic_perform_write+0x391/0x8f0 [ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10 [ 9849.509062] ? file_update_time_flags+0x19a/0x4b0 [ 9849.509581] ? ceph_get_caps+0x63/0xf0 [ 9849.510259] ? ceph_get_caps+0x63/0xf0 [ 9849.510530] ceph_write_iter+0xe79/0x1ae0 [ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10 [ 9849.511839] ? lock_acquire+0x1ad/0x310 [ 9849.512334] ? ksys_write+0xf9/0x230 [ 9849.512582] ? lock_is_held_type+0xaa/0x140 [ 9849.513128] vfs_write+0x512/0x1110 [ 9849.513634] ? __fget_files+0x33/0x350 [ 9849.513893] ? __pfx_vfs_write+0x10/0x10 [ 9849.514143] ? mutex_lock_nested+0x1b/0x30 [ 9849.514394] ksys_write+0xf9/0x230 [ 9849.514621] ? __pfx_ksys_write+0x10/0x10 [ 9849.514887] ? do_syscall_64+0x25e/0x1520 [ 9849.515122] ? __kasan_check_read+0x11/0x20 [ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.515655] __x64_sys_write+0x72/0xd0 [ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0 [ 9849.516130] x64_sys_call+0x22f/0x2390 [ 9849.516341] do_syscall_64+0x12b/0x1520 [ 9849.516545] ? do_syscall_64+0x27c/0x1520 [ 9849.516783] ? do_syscall_64+0x27c/0x1520 [ 9849.517003] ? lock_release+0x318/0x480 [ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0 [ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210 [ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.518073] ? do_syscall_64+0x25e/0x1520 [ 9849.518291] ? __kasan_check_read+0x11/0x20 [ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.518799] ? do_syscall_64+0x27c/0x1520 [ 9849.519024] ? local_clock_noinstr+0xf/0x120 [ 9849.519262] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.519544] ? do_syscall_64+0x25e/0x1520 [ 9849.519781] ? __kasan_check_read+0x11/0x20 [ 9849.520008] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.520273] ? do_syscall_64+0x27c/0x1520 [ 9849.520491] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.520767] ? irqentry_exit+0x10c/0x6c0 [ 9849.520984] ? trace_hardirqs_off+0x86/0x1b0 [ 9849.521224] ? exc_page_fault+0xab/0x130 [ 9849.521472] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.521766] RIP: 0033:0x7e36cbd14907 [ 9849.521989] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 9849.523057] RSP: 002b:00007ffff2d2a968 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 9849.523484] RAX: ffffffffffffffda RBX: 000000000000e549 RCX: 00007e36cbd14907 [ 9849.523885] RDX: 000000000000e549 RSI: 00005bd797ec6370 RDI: 0000000000000004 [ 9849.524277] RBP: 0000000000000004 R08: 0000000000000047 R09: 00005bd797ec6370 [ 9849.524652] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000049 [ 9849.525062] R13: 0000000010781a37 R14: 00005bd797ec6370 R15: 0000000000000000 [ 9849.525447] [ 9849.525574] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass ghash_clmulni_intel aesni_intel input_leds rapl mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 bochs qemu_fw_cfg i2c_smbus pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 9849.529150] ---[ end trace 0000000000000000 ]--- [ 9849.529502] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.530813] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.534986] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.536198] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.537718] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.539321] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.540862] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.542438] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.543996] FS: 00007e36cbe94740(0000) GS:ffff88824b899000(0000) knlGS:0000000000000000 [ 9849.545854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.547092] CR2: 00007e36cb3ff000 CR3: 000000011bbf6006 CR4: 0000000000772ef0 [ 9849.548679] PKRU: 55555554 The race sequence: 1. Read completes -> netfs_read_collection() runs 2. netfs_wake_rreq_flag(rreq, NETFS_RREQ_IN_PROGRESS, ...) 3. netfs_wait_for_read() returns -EFAULT to netfs_write_begin() 4. The netfs_unlock_abandoned_read_pages() unlocks the folio 5. netfs_write_begin() calls folio_unlock(folio) -> VM_BUG_ON_FOLIO() The key reason of the issue that netfs_unlock_abandoned_read_pages() doesn't check the flag NETFS_RREQ_NO_UNLOCK_FOLIO and executes folio_unlock() unconditionally. This patch implements in netfs_unlock_abandoned_read_pages() logic similar to netfs_unlock_read_folio(). Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Signed-off-by: Viacheslav Dubeyko Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-8-dhowells@redhat.com Reviewed-by: Paulo Alcantara (Red Hat) cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: Ceph Development Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 9bd631212a55b4bba1987c944b02b55a93d46c4b Author: Julian Braha Date: Sun Apr 5 17:15:45 2026 +0100 powerpc: fix dead default for GUEST_STATE_BUFFER_TEST [ Upstream commit aef656a0e6c01796190bb5bd2bdba1c644ed7811 ] The GUEST_STATE_BUFFER_TEST config option should default to KUNIT_ALL_TESTS so that if all tests are enabled then it is included, but currently the 'default KUNIT_ALL_TESTS' statement is shadowed by 'def_tristate n', meaning that this second default statement is currently dead code. It looks to me like the commit 6ccbbc33f06a ("KVM: PPC: Add helper library for Guest State Buffers") intended to set the default to KUNIT_ALL_TESTS, but mistakenly missed the def_tristate. This dead code was found by kconfirm, a static analysis tool for Kconfig. Fixes: 6ccbbc33f06a ("KVM: PPC: Add helper library for Guest State Buffers") Signed-off-by: Julian Braha Tested-by: Gautam Menghani Reviewed-by: Amit Machhiwal Reviewed-by: Harsh Prateek Bora Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260405161545.161006-1-julianbraha@gmail.com Signed-off-by: Sasha Levin commit 87bb3e719042f0030a6dad39118c6a6b2a491ad9 Author: Kuniyuki Iwashima Date: Fri May 8 12:08:46 2026 +0000 tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key(). [ Upstream commit 03cb001ef87b3f8d859cf7f96329acf3d6235d29 ] lockdep_sock_is_held() was added in tcp_ao_established_key() by the cited commit. It can be called from tcp_v[46]_timewait_ack() with twsk. Since it does not have sk->sk_lock, the lockdep annotation results in out-of-bound access. $ pahole -C tcp_timewait_sock vmlinux | grep size /* size: 288, cachelines: 5, members: 8 */ $ pahole -C sock vmlinux | grep sk_lock socket_lock_t sk_lock; /* 440 192 */ Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. Fixes: 6b2d11e2d8fc ("net/tcp: Add missing lockdep annotations for TCP-AO hlist traversals") Reported-by: Damiano Melotti Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260508120853.4098365-1-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ef78e5e14727a1d34e33af0690deced4e21e04ee Author: Johannes Thumshirn Date: Wed Apr 29 22:58:15 2026 +0200 zonefs: handle integer overflow in zonefs_fname_to_fno [ Upstream commit 3a8389d42bdf4213730f4067f8bfa78bae6564ef ] In zonefs the file name in one of the two directories corresponds to the zone number. Here Alexey reported a possible integer overflow in zonefs_fname_to_fno(), where the parsing of the zone number from the file name can overflow the 'long' data type. Add a check for integer overflows and if the fno 'long' did overflow return -ENOENT. Reported-by: Alexey Dobriyan Fixes: d207794ababe ("zonefs: Dynamically create file inodes when needed") Signed-off-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 684a78183c54c23e70d1cba320f7fc184604210b Author: Jiayuan Chen Date: Mon Mar 30 15:32:29 2026 +0800 irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT [ Upstream commit 91840be8f710370607f949a627e070896faeddb8 ] On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0. After irq_work_single() clears BUSY via atomic_cmpxchg(), it still dereferences @work for irq_work_is_hard() and rcuwait_wake_up(). An irq_work_sync() caller on another CPU that enters after BUSY is cleared can observe BUSY==0 immediately, return, and free the work before those accesses complete — causing a use-after-free. Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire irq_work_single() execution is within an RCU read-side critical section. Then add synchronize_rcu() in irq_work_sync() after rcuwait_wait_event() to ensure the caller waits for the RCU grace period before returning, preventing premature frees. Fixes: 810979682ccc ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.") Suggested-by: Sebastian Andrzej Siewior Suggested-by: Steven Rostedt Signed-off-by: Jiayuan Chen Signed-off-by: Thomas Gleixner Reviewed-by: Sebastian Andrzej Siewior Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin commit f450d8e8458c2fc26771faaaa497d3aa156937c9 Author: Zhihao Cheng Date: Thu May 7 19:23:01 2026 +0800 nsfs: fix wrong error code returned for pidns ioctls [ Upstream commit 725ecd80688bf3c57ca9205431f2c06174ff0756 ] When executing NS_GET_PID_FROM_PIDNS (or similar pidns ioctls), if the target task cannot be found in the corresponding pid_ns, the error code should be ESRCH instead of ENOTTY. This bug was introduced when the extensible ioctl handling was added. Without proper return, ret would be overwritten by the default case in the extensible ioctl switch statement. Fixes: a1d220d9dafa8 ("nsfs: iterate through mount namespaces") Signed-off-by: Zhihao Cheng Link: https://patch.msgid.link/20260507112301.1042757-1-chengzhihao1@huawei.com Reviewed-by: Yang Erkun Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 43eb8965a4f3cca8fc33b38cc4f2d1ca0259adc0 Author: Ming Lei Date: Sun May 10 22:48:43 2026 +0800 ublk: reject max_sectors smaller than PAGE_SECTORS in parameter validation [ Upstream commit 1860c2f85922917d8a46f16a6f4bd2298ffa0fb5 ] blk_validate_limits() requires max_hw_sectors >= PAGE_SECTORS and fires a WARN_ON_ONCE if this invariant is violated. ublk_validate_params() only checked the upper bound of max_sectors against max_io_buf_bytes, allowing userspace to pass small values (including zero) that trigger the warning when blk_mq_alloc_disk() is called from ublk_ctrl_start_dev(). Before 494ea040bcb5, ublk used blk_queue_max_hw_sectors() which silently clamped small values up to PAGE_SECTORS. The conversion to passing queue_limits directly to blk_mq_alloc_disk() lost that clamping and now hits blk_validate_limits()'s WARN_ON_ONCE instead. Validate that max_sectors is at least PAGE_SECTORS in ublk_validate_params() so invalid values are rejected early with -EINVAL instead of reaching the block layer. Fixes: 494ea040bcb5 ("ublk: pass queue_limits to blk_mq_alloc_disk") Signed-off-by: Ming Lei Link: https://patch.msgid.link/20260510144843.769031-1-tom.leiming@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit c6211c8832d542d93f4e030e6e6f79c45b219e13 Author: Rosen Penev Date: Wed May 6 01:55:22 2026 -0700 irqchip/ath79-cpu: Remove unused function [ Upstream commit 0fa10fb77069fb67aa51384868ef3702b7791465 ] ath79_cpu_irq_init() was part of the legacy pre-OF code that got removed a while back. Remove it to get rid of a missing prototype warning, reported by the kernel test robot. [ tglx: Fix the subject prefix. Sigh ... ] Fixes: 51fa4f8912c0 ("MIPS: ath79: drop legacy IRQ code") Reported-by: kernel test robot Signed-off-by: Rosen Penev Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260506085522.1210143-1-rosenp@gmail.com Closes: https://lore.kernel.org/oe-kbuild-all/202412011509.kGQkDr1y-lkp@intel.com/ Signed-off-by: Sasha Levin commit d1fc00ec02e9deb3f8d2bd59caf938c554fbc576 Author: Chuck Lever Date: Sun Apr 19 14:52:59 2026 -0400 NFSD: Fix infinite loop in layout state revocation [ Upstream commit 4f8ef58c10bfe5f86a643c7c8331b37e69e3dae1 ] find_one_sb_stid() skips stids whose sc_status is non-zero, but the SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status before calling nfsd4_close_layout(). The retry loop therefore finds the same layout stid on every iteration, hanging the revoker indefinitely. Fixes: 1e33e1414bec ("nfsd: allow layout state to be admin-revoked.") Reported-by: Dai Ngo Reviewed-by: Jeff Layton Tested-by: Dai Ngo Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit add14aba95a6fb940079eebb31bd64f771646cbe Author: Gabor Juhos Date: Sat Mar 21 15:42:32 2026 +0100 phy: marvell: mvebu-a3700-utmi: fix incorrect USB2_PHY_CTRL register access [ Upstream commit 91ddf6f722084383fb05be731c0107814b055c0c ] The mvebu_a3700_utmi_phy_power_off() function tries to modify the USB2_PHY_CTRL register by using the IO address of the PHY IP block along with the readl/writel IO accessors. However, the register exist in the USB miscellaneous register space, and as such it must be accessed via regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function. Change the code to use regmap_update_bits() for modífying the register to fix this. Fixes: cc8b7a0ae866 ("phy: add A3700 UTMI PHY driver") Signed-off-by: Gabor Juhos Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit a18f7df7b62817f0bb54979a288159d98073ccab Author: Myeonghun Pak Date: Wed May 6 21:43:11 2026 +0900 net: lan966x: avoid unregistering netdev on register failure [ Upstream commit c4f3d6eb1fcf6cd9ce4644f604d5aad1ce594dfc ] lan966x_probe_port() stores the newly allocated net_device in the port before calling register_netdev(). If register_netdev() fails, the probe error path calls lan966x_cleanup_ports(), which sees port->dev and calls unregister_netdev() for a device that was never registered. Destroy the phylink instance created for this port and clear port->dev before returning the registration error. The common cleanup path now skips ports without port->dev before reaching the registered netdev cleanup, so it only handles ports that reached the registered-netdev lifetime. This also avoids treating an uninitialized FDMA netdev and the failed port as a NULL == NULL match in the common cleanup path. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Link: https://patch.msgid.link/20260506124331.31945-1-mhun512@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6e14d45580ebce232cd0078762a9875e87c5222c Author: Bart Van Assche Date: Wed May 6 14:48:15 2026 -0700 ice: fix locking in ice_dcb_rebuild() [ Upstream commit 0ded1f36ba4021cba50513e80be6b6e173710168 ] Move the mutex_lock() call up to prevent that DCB settings change after the first ice_query_port_ets() call. The second ice_query_port_ets() call in ice_dcb_rebuild() is already protected by pf->tc_mutex. This also fixes a bug in an error path, as before taking the first "goto dcb_error" in the function jumped over mutex_lock() to mutex_unlock(). This bug has been detected by the clang thread-safety analyzer. Cc: intel-wired-lan@lists.osuosl.org Fixes: 242b5e068b25 ("ice: Fix DCB rebuild after reset") Signed-off-by: Bart Van Assche Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Tested-by: Arpana Arland Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-6-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0c3629da9ee3a9aa6a40cf6d678d8b95972cd37b Author: Marcin Szycik Date: Wed May 6 14:48:14 2026 -0700 ice: fix setting RSS VSI hash for E830 [ Upstream commit b3cda96feb60d91fe88d52b974ff110dcfa91239 ] ice_set_rss_hfunc() performs a VSI update, in which it sets hashing function, leaving other VSI options unchanged. However, ::q_opt_flags is mistakenly set to the value of another field, instead of its original value, probably due to a typo. What happens next is hardware-dependent: On E810, only the first bit is meaningful (see ICE_AQ_VSI_Q_OPT_PE_FLTR_EN) and can potentially end up in a different state than before VSI update. On E830, some of the remaining bits are not reserved. Setting them to some unrelated values can cause the firmware to reject the update because of invalid settings, or worse - succeed. Reproducer: sudo ethtool -X $PF1 equal 8 Output in dmesg: Failed to configure RSS hash for VSI 6, error -5 Fixes: 352e9bf23813 ("ice: enable symmetric-xor RSS for Toeplitz hash function") Reviewed-by: Aleksandr Loktionov Reviewed-by: Przemek Kitszel Signed-off-by: Marcin Szycik Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260506-jk-iwl-net-2026-05-04-v2-5-a5ea4dc837a9@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit df8060ca14ac6061f6659927b8fd7d6ce07e99cf Author: Kuniyuki Iwashima Date: Wed May 6 03:59:19 2026 +0000 tcp: Fix imbalanced icsk_accept_queue count. [ Upstream commit 7eca3292cac7c26dad4c236f51ba225c39a0523f ] When TCP socket migration happens in reqsk_timer_handler(), @sk_listener will be updated with the new listener. When we call __inet_csk_reqsk_queue_drop(), the listener must be the one stored in req->rsk_listener. The cited commit accidentally replaced oreq->rsk_listener with sk_listener, leading to imbalanced icsk_accept_queue count. Let's pass the correct listener to __inet_csk_reqsk_queue_drop(). Fixes: e8c526f2bdf1 ("tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().") Reported-by: Damiano Melotti Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260506035954.1563147-3-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit accc0004c501a9918313142282b094d408af06fb Author: Martin Kaiser Date: Fri May 8 09:56:36 2026 +0900 test_kprobes: clear kprobes between test runs [ Upstream commit ef5581bb30efb939cc2bf093475c6cc85258e5cd ] Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run). Link: https://lore.kernel.org/all/20260507134615.1010905-1-martin@kaiser.cx/ Fixes: e44e81c5b90f ("kprobes: convert tests to kunit") Signed-off-by: Martin Kaiser Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 4c8e58cc95dcea381524aac70767b1d59c93aa25 Author: Jianpeng Chang Date: Fri May 8 09:56:36 2026 +0900 kprobes: skip non-symbol addresses in kprobe_add_ksym_blacklist() [ Upstream commit 307abfac04a254c09c5705d816b33354acee97a0 ] When kprobe_add_area_blacklist() iterates through a section like .kprobes.text, the start address may not correspond to a named symbol. On ARM64 with CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS=y (introduced by commit baaf553d3bc3 ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS")), the compiler flag -fpatchable-function-entry=4,2 inserts 2 NOPs before each function entry point for ftrace call_ops. These pre-function NOPs sit at the section base address, before the first named function symbol. The compiler emits a $x mapping symbol at offset 0x00 to mark the start of code, but find_kallsyms_symbol() ignores mapping symbols. Without CONFIG_DYNAMIC_FTRACE_WITH_CALL_OPS (e.g. defconfig), no pre-function NOPs are inserted, the first function starts at offset 0x00, and the bug does not trigger. This only affects modules that have a .kprobes.text section (i.e. those using the __kprobes annotation). Modules using NOKPROBE_SYMBOL() instead (like kretprobe_example.ko) blacklist exact function addresses via the _kprobe_blacklist section and are not affected. For kprobe_example.ko on ARM64 with -fpatchable-function-entry=4,2, the .kprobes.text section layout is: offset 0x00: $x + 2 NOPs (mapping symbol + ftrace preamble) offset 0x08: handler_post (64 bytes) offset 0x50: handler_pre (68 bytes) kprobe_add_area_blacklist() starts iterating from the section base address (offset 0x00), which only has the $x mapping symbol. kprobe_add_ksym_blacklist() then calls kallsyms_lookup_size_offset() for this address, which goes through: kallsyms_lookup_size_offset() -> module_address_lookup() -> find_kallsyms_symbol() find_kallsyms_symbol() scans all module symbols to find the closest preceding symbol. Since no named text symbol exists at offset 0x00, find_kallsyms_symbol() picks __UNIQUE_ID_vermagic (a .modinfo symbol whose address is in the temporary image) as the "best" match. The computed "size" = next_text_symbol - modinfo_symbol spans across these two unrelated memory regions, creating a blacklist entry with a bogus range of tens of terabytes. Whether this causes a visible failure depends on address randomization, here is what happens on Raspberry Pi 4/5: - On RPi5, the bogus size was ~35 TB. start + size stayed within 64-bit range, so the blacklist entry covered the entire kernel text. register_kprobe() in the module's own init function failed with -EINVAL. - On RPi4, the bogus size was ~75 TB. start + size overflowed 64 bits and wrapped to a small address near zero. The range check (addr >= start && addr < end) then failed because end wrapped around, so the bogus entry was accidentally harmless and kprobes worked by luck. The same bug exists on both machines, but randomization determines whether the integer overflow masks it or not. Fix this by adding notrace to the __kprobes macro. Functions in .kprobes.text are kprobe infrastructure handlers that should never be traced by ftrace. With notrace, the compiler stops inserting them and the non-symbol gap at the section start disappears entirely. Link: https://lore.kernel.org/all/20260506012706.2785785-1-jianpeng.chang.cn@windriver.com/ Fixes: baaf553d3bc3 ("arm64: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS") Signed-off-by: Jianpeng Chang Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit c816dd5c34bb4f5821bf3ee4201279912814b621 Author: Florian Westphal Date: Wed May 6 12:07:16 2026 +0200 netfilter: x_tables: unregister the templates first [ Upstream commit d338693d778579b676a61346849bebd892427158 ] When the module is going away we need to zap the template first. Else there is a small race window where userspace could instantiate a new table after the pernet exit function has removed the current table. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Reported-by: Tristan Madani Reviewed-by: Tristan Madani Closes: https://lore.kernel.org/netfilter-devel/20260429175613.1459342-1-tristmd@gmail.com/ Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 12a0487945c09760a5968d9333383014ea294117 Author: Filipe Manana Date: Tue Apr 28 16:58:56 2026 +0100 btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file() [ Upstream commit c73370c677646e86fc4b1780fb07027bdf847375 ] The trace event btrfs_sync_file() is called in an atomic context (all trace events are) and its call to dput(), which is needed due to the call to dget_parent(), can sleep, triggering a kernel splat. This can be reproduced by enabling the trace event and running btrfs/056 from fstests for example. The splat shown in dmesg is the following: [53.919] BUG: sleeping function called from invalid context at fs/dcache.c:970 [53.947] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 32773, name: xfs_io [53.988] preempt_count: 2, expected: 0 [53.967] RCU nest depth: 0, expected: 0 [53.943] Preemption disabled at: [53.944] [<0000000000000000>] 0x0 [54.078] CPU: 0 UID: 0 PID: 32773 Comm: xfs_io Tainted: G W 7.1.0-rc1-btrfs-next-232+ #1 PREEMPT(full) [54.070] Tainted: [W]=WARN [54.071] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [54.072] Call Trace: [54.074] [54.076] dump_stack_lvl+0x56/0x80 [54.079] __might_resched.cold+0xd6/0x10f [54.072] dput.part.0+0x24/0x110 [54.078] trace_event_raw_event_btrfs_sync_file+0x75/0x140 [btrfs] [54.089] btrfs_sync_file+0x1ed/0x530 [btrfs] [54.087] ? __handle_mm_fault+0x8ae/0xed0 [54.089] btrfs_do_write_iter+0x172/0x210 [btrfs] [54.091] vfs_write+0x21f/0x450 [54.094] __x64_sys_pwrite64+0x8d/0xc0 [54.096] ? do_user_addr_fault+0x20c/0x670 [54.099] do_syscall_64+0x60/0xf20 [54.092] ? clear_bhb_loop+0x60/0xb0 [54.094] entry_SYSCALL_64_after_hwframe+0x76/0x7e So stop using dget_parent() and dput() and access the parent dentry directly as dentry->d_parent. This is also what ext4 is doing in its equivalent trace event ext4_sync_file_enter(). Fixes: a85b46db143f ("btrfs: tracepoints: get correct superblock from dentry in event btrfs_sync_file()") Reviewed-by: Boris Burkov Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 1968d13a2d3497057767a3b9da7a9744f275727a Author: Shuhao Fu Date: Tue Apr 28 16:12:38 2026 +0800 ALSA: hda: cs35l41: Put ACPI device on missing physical node [ Upstream commit fca7401fe37f7abc6e54147ea560f37279231137 ] acpi_dev_get_first_match_dev() returns a refcounted ACPI device and callers must balance it with acpi_dev_put(). cs35l41_hda_read_acpi() stores the returned ACPI device in cs35l41->dacpi. That reference is normally released by the later probe cleanup or the remove path, but the NULL-check on physdev exits before either of those paths can run. Drop the lookup reference before returning -ENODEV. Fixes: c34b04cc6178 ("ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()") Signed-off-by: Shuhao Fu Tested-by: Simon Trimmer Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260428081238.GA1659932@chcpu16 Signed-off-by: Sasha Levin commit 0ddc7bb7b3672f3c737138c35ce0414f8c5c4deb Author: Shuhao Fu Date: Tue Apr 28 16:01:39 2026 +0800 ALSA: hda: cs35l56: Put ACPI device after setting companion [ Upstream commit aa2fbece1b07954ef26488c800d126a36a8ab93e ] acpi_dev_get_first_match_dev() returns a refcounted ACPI device and callers are expected to balance it with acpi_dev_put(). When no companion is already attached, cs35l56_hda_read_acpi() looks up an ACPI device and sets it with ACPI_COMPANION_SET(), but leaves the lookup reference held. ACPI_COMPANION_SET() does not take ownership of that reference, so drop it with acpi_dev_put() after attaching the companion. Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Shuhao Fu Tested-by: Simon Trimmer Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260428080139.GA1649104@chcpu16 Signed-off-by: Sasha Levin commit 58a112b0973f6cd6bcb8c503d1ff88be411ed0f0 Author: Guenter Roeck Date: Tue May 5 21:15:37 2026 +0200 ARM: integrator: Fix early initialization [ Upstream commit 90d77b30a666049ad24df463f52e5d529c44e8cd ] Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. Fixes: bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap") Cc: Linus Walleij Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/20250518164118.3859567-1-linux@roeck-us.net Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20260505-integrator-fixes-v1-1-56ab9aac59db@kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin commit 11438e9071174b60623840f63036bbe94ce00e99 Author: Sudeep Holla Date: Tue Apr 28 19:33:35 2026 +0100 firmware: arm_ffa: Fix sched-recv callback partition lookup [ Upstream commit a6848a50404eefb6f0b131c21881a2d8d21b31a9 ] ffa_sched_recv_cb_update() used list_for_each_entry_safe() to search for a matching partition and then tested the iterator against NULL. That is not a valid end-of-list check for circular lists and can fall through with an invalid pointer. Use a normal iterator and detect the not-found case correctly before touching the partition state. Fixes: be61da938576 ("firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-11-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 39084bd89421fdf32a0b4ce26891b0087758cf77 Author: Sudeep Holla Date: Tue Apr 28 19:33:33 2026 +0100 firmware: arm_ffa: Align RxTx buffer size before mapping [ Upstream commit 0399e3f872ca3d78044bb715a73ea645806d2c7b ] Commit 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP") advertises PAGE_ALIGN(rxtx_bufsz) to firmware when mapping the buffers but the driver continues to stores the minimum FF-A buffer size in drv_info->rxtx_bufsz which is used elsewhere in the driver. Align the size before storing it so that the allocation, validation and FFA_RXTX_MAP all use the same buffer size. Fixes: 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP") Cc: Sebastian Ene Link: https://sashiko.dev/#/patchset/20260402113939.930221-1-sebastianene@google.com Reviewed-by: Sebastian Ene Link: https://patch.msgid.link/20260428-ffa_fixes-v2-9-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit b4b6ee2dbb67100ab73d4556c61fde2a68b9caeb Author: Maulik Shah Date: Tue Apr 28 17:44:58 2026 +0530 pinctrl: qcom: Fix wakeirq map by removing disconnected irqs for sm8150 [ Upstream commit 52ac35b8a151446481496404af3a8e5e889b3c5a ] PDC interrupts 122-125 were meant for ibi_i3c wakeup but sm8150 do not support i3c. GPIOs 39,51,88 and 144 are also connected to different PDC pin and already reflected in the wake irq map. Remove the unsupported wakeup interrupts from the map. Fixes: 90337380c809 ("pinctrl: qcom: sm8150: Specify PDC map") Reviewed-by: Konrad Dybcio Signed-off-by: Maulik Shah Signed-off-by: Navya Malempati Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 71b62d98f00f24f66ef3f6fd1a22b38571fa0568 Author: David Gow Date: Sat Apr 25 11:41:54 2026 +0800 kunit: config: KUNIT_DEBUGFS should depend on DEBUG_FS [ Upstream commit 8f80b5b227ef9ea422080487715c841856339aed ] CONFIG_KUNIT_DEBUGFS is totally useless without debugfs, so it should depend on CONFIG_DEBUG_FS. Link: https://lore.kernel.org/r/20260425034155.53913-2-david@davidgow.net Fixes: e2219db280e3 ("kunit: add debugfs /sys/kernel/debug/kunit//results display") Signed-off-by: David Gow Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 405223d08f6060cd07595f7d014d320b283cd762 Author: David Gow Date: Sat Apr 25 11:41:53 2026 +0800 kunit: config: Enable KUNIT_DEBUGFS by default [ Upstream commit 17e4c68ff35090d8cb743e3c82c09f92fda1ebda ] The KUNIT_DEBUGFS option is currently enabled based on the value of KUNIT_ALL_TESTS, but it really doesn't have anything to do with the set of enabled tests, so just enable it by default anyway. In particular, this shouldn't be only visible if KUNIT_ALL_TESTS is set, which is quite confusing. Link: https://lore.kernel.org/r/20260425034155.53913-1-david@davidgow.net Fixes: beaed42c427d ("kunit: default KUNIT_* fragments to KUNIT_ALL_TESTS") Signed-off-by: David Gow Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin commit 4f17d73e21c2e369de093089239366e2916b953a Author: Guo Ren (Alibaba DAMO Academy) Date: Sun Jan 25 00:52:12 2026 -0500 riscv: mm: Fixup no5lvl failure when vaddr is invalid [ Upstream commit db909bd7986c10da074917af3dae83a60fa65093 ] Unlike no4lvl, no5lvl still continues to detect satp, which requires va=pa mapping. When pa=0x800000000000, no5lvl would fail in Sv48 mode due to an illegal VA value of 0x800000000000. So, prevent detecting the satp flow for no5lvl, when vaddr is invalid. Add the is_vaddr_valid() function for checking. Fixes: 26e7aacb83df ("riscv: Allow to downgrade paging mode from the command line") Cc: Alexandre Ghiti Cc: Björn Töpel Signed-off-by: Guo Ren (Alibaba DAMO Academy) Tested-by: Fangyu Yu Link: https://patch.msgid.link/20260125055212.433163-1-guoren@kernel.org [pjw@kernel.org: cleaned up commit message] Signed-off-by: Paul Walmsley Signed-off-by: Sasha Levin commit 2a211f401c9e47ad92049567e5471b068abdabcd Author: Sudeep Holla Date: Tue Apr 28 19:33:29 2026 +0100 firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0 [ Upstream commit 6d3daa9b8d313f42d52e75590310f26a29b61b44 ] For FF-A v1.0 the driver registers a bus notifier to backfill UUID matching, but the notifier was never unregistered on cleanup paths. Track the registration state and unregister it during teardown and early partition-setup failure. Fixes: 9dd15934f60d ("firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-5-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit c4dff746d2f27e3fdddd3214211e51422fe1163f Author: Sudeep Holla Date: Mon Feb 17 15:38:59 2025 +0000 firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback [ Upstream commit be61da938576671c664382a059f961d7b4b2fc41 ] A partition can implement multiple UUIDs and currently we successfully register each UUID service as a FF-A device. However when adding the same partition info to the XArray which tracks the SRI callbacks more than once, it fails. In order to allow multiple UUIDs per partition to register SRI callbacks the partition information stored in the XArray needs to be extended to a listed list. A function to remove the list of partition information in the XArray is not added as there are no users at the time. All the partitions are added at probe/initialisation and removed at cleanup stage. Tested-by: Viresh Kumar Message-Id: <20250217-ffa_updates-v3-18-bd1d9de615e7@arm.com> Signed-off-by: Sudeep Holla Stable-dep-of: 6d3daa9b8d31 ("firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0") Signed-off-by: Sasha Levin commit afa2840c4517d7c6fc1aa867e1c35b6af361239d Author: Sudeep Holla Date: Mon Feb 17 15:38:54 2025 +0000 firmware: arm_ffa: Remove unnecessary declaration of ffa_partitions_cleanup() [ Upstream commit 9982cabf403fbd06a120a2d5b21830effd32b370 ] In order to keep the uniformity, just move the ffa_partitions_cleanup() before it's first usage and drop the unnecessary forward declaration. No functional change. Tested-by: Viresh Kumar Message-Id: <20250217-ffa_updates-v3-13-bd1d9de615e7@arm.com> Signed-off-by: Sudeep Holla Stable-dep-of: 6d3daa9b8d31 ("firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0") Signed-off-by: Sasha Levin commit 59296431d231bdd923636dec22b90f513143cb4a Author: Sudeep Holla Date: Mon Feb 17 15:38:49 2025 +0000 firmware: arm_ffa: Unregister the FF-A devices when cleaning up the partitions [ Upstream commit 46dcd68aaccac0812c12ec3f4e59c8963e2760ad ] Both the FF-A core and the bus were in a single module before the commit 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules"). The arm_ffa_bus_exit() takes care of unregistering all the FF-A devices. Now that there are 2 distinct modules, if the core driver is unloaded and reloaded, it will end up adding duplicate FF-A devices as the previously registered devices weren't unregistered when we cleaned up the modules. Fix the same by unregistering all the FF-A devices on the FF-A bus during the cleaning up of the partitions and hence the cleanup of the module. Fixes: 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules") Tested-by: Viresh Kumar Message-Id: <20250217-ffa_updates-v3-8-bd1d9de615e7@arm.com> Signed-off-by: Sudeep Holla Stable-dep-of: 6d3daa9b8d31 ("firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0") Signed-off-by: Sasha Levin commit 82222521467129958ce2a93cc18ae29c001ed1a9 Author: Viresh Kumar Date: Mon Feb 17 15:38:47 2025 +0000 firmware: arm_ffa: Refactor addition of partition information into XArray [ Upstream commit 3c3d6767466ea316869c9f2bdd976aec8ce44545 ] Move the common code handling addition of the FF-A partition information into the XArray as a new routine. No functional change. Signed-off-by: Viresh Kumar Message-Id: <20250217-ffa_updates-v3-6-bd1d9de615e7@arm.com> Signed-off-by: Sudeep Holla Stable-dep-of: 6d3daa9b8d31 ("firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0") Signed-off-by: Sasha Levin commit 26a654e55021c0b52ee05c766f0c326b25821b93 Author: Sudeep Holla Date: Tue Apr 28 19:33:28 2026 +0100 firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue [ Upstream commit 9985d5357ed93af0d1933969c247e966957730e1 ] Per-vcpu notification handling already runs from a per-cpu work item on the target cpu. Routing that path back through smp_call_function_single() re-enters the call-function IPI path and executes the notification handler with interrupts disabled. That makes the framework path unsafe, since it takes a mutex, allocates memory with GFP_KERNEL, and invokes client callbacks. Handle per-vcpu self notifications directly from the existing per-cpu work item instead. This keeps the per-vcpu path in task context and avoids the extra IPI hop entirely. Fixes: 3a3e2b83e805 ("firmware: arm_ffa: Avoid queuing work when running on the worker queue") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-4-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 0e976891617b9fcbf8816d05effdbd92e062f3b8 Author: Sudeep Holla Date: Tue Apr 28 19:33:26 2026 +0100 firmware: arm_ffa: Skip free_pages on RX buffer alloc failure [ Upstream commit 09527e2c534911619d7e098729711100290bc3e1 ] If the RX buffer allocation fails in ffa_init(), the error path jumps to free_pages even though no buffer has been allocated yet. Route that case directly to free_drv_info so the cleanup path is only used after at least one RX/TX buffer allocation has succeeded. Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 34f59211984f66788390e7469f3e99d3796db4a8 Author: Sudeep Holla Date: Tue Apr 28 19:33:25 2026 +0100 firmware: arm_ffa: Check for NULL FF-A ID table while driver registration [ Upstream commit 0a5e695095c557d2380131b613dea4e8d90371be ] The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match. Fixes: 92743071464f ("firmware: arm_ffa: Ensure drivers provide a probe function") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 265a8f0e2c6e1105f0eb440424306cd88befefc0 Author: Takashi Iwai Date: Tue Apr 28 10:33:16 2026 +0200 HID: uclogic: Fix regression of input name assignment [ Upstream commit 487359284509a6745e14b8c0518768bc277809b0 ] The previous fix for adding the devm_kasprintf() return check in the commit bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") changed the condition of hi->input->name assignment, and it resulted in missing the proper input device name when no custom suffix is defined. Restore the conditional to the original content to address the regression. Fixes: bd07f751208b ("HID: uclogic: Add NULL check in uclogic_input_configured()") Signed-off-by: Takashi Iwai Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 39e0bd08654e33f4e900311649e07e7aeb4abdd5 Author: Biju Das Date: Sat Mar 28 09:05:45 2026 +0000 pinctrl: renesas: rzg2l: Fix incorrect PUPD register offset for high pins during suspend/resume [ Upstream commit 6dba9b7268cc50166bce47608670192fd874e363 ] When saving/restoring pull-up/down register state during suspend/resume, the second PUPD register access was incorrectly using the same base offset as the first, effectively reading/writing the same register twice instead of the adjacent one. Add the correct + 4 byte offset to the second RZG2L_PCTRL_REG_ACCESS32 call so that pupd[1][port] is properly saved and restored from the next 32-bit register in the PUPD register pair, covering pins 4–7 of ports with 4 or more pins. Fixes: b2bd65fbb617 ("pinctrl: renesas: rzg2l: Add suspend/resume support for pull up/down") Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260328090548.84124-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit b6b765d34810c1f9b27f4fb7e71655fe863c232d Author: Marek Vasut Date: Sat Mar 28 00:42:11 2026 +0100 ARM: dts: renesas: rskrza1: Drop superfluous cells [ Upstream commit ab83176d3cf1cf1c1f6e604432905bda4515d17f ] Drop superfluous address-cells and size-cells to fix DTC W=1 warning: arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts:32.17-72.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property Signed-off-by: Marek Vasut Fixes: 98537eb77d3ef185 ("ARM: dts: renesas: rskrza1: Add FLASH nodes") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-7-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit 3fdbd6d48a1a159fdebd6d1c8619a6f05aa1d3b2 Author: Marek Vasut Date: Sat Mar 28 00:42:10 2026 +0100 ARM: dts: renesas: genmai: Drop superfluous cells [ Upstream commit 714e1d6bba0e0abe5c87c8e189a35fa690540df4 ] Drop superfluous address-cells and size-cells to fix DTC W=1 warning: arch/arm/boot/dts/renesas/r7s72100-genmai.dts:28.17-55.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property Signed-off-by: Marek Vasut Fixes: 30e0a8cf886cb459 ("ARM: dts: renesas: genmai: Add FLASH nodes") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-6-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit ae25cf2ea9ebd06d7ad416647dbdc7b5d0172946 Author: Abdurrahman Hussain Date: Mon May 18 17:52:27 2026 -0700 hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors commit a7232f68c43ca62f545049b7f5fbfc75137b843b upstream. adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the pin-status word as pins_status = read_buf[0] + (read_buf[1] << 8); right after i2c_smbus_read_block_data(), guarding only against an error return. A well-behaved device returns 2 bytes for GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or 1-byte response too. If the device returns 0 bytes, both read_buf slots are uninitialized stack memory; if it returns 1 byte, read_buf[1] is. The composed value then flows through set_bit() into the caller's *bits in adm1266_gpio_get_multiple(), or into the return value of adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and the char-dev ioctls). That leaks a few bits of kernel stack per request on any device whose firmware glitch, bus error, or hostile slave produces a short block-read response. Add the missing length check to both call sites and surface a short response as -EIO. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-3-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit b75d17559dcd89e73ae2a2bb6c6589ff643fbb2b Author: Abdurrahman Hussain Date: Mon May 18 17:52:29 2026 -0700 hwmon: (pmbus/adm1266) register the nvmem device after pmbus_do_probe() commit 6af713af91d5c34ec049eb3cc2c5b3f5eba953b8 upstream. adm1266_probe() calls adm1266_config_nvmem() -- which goes on to devm_nvmem_register() and exposes adm1266_nvmem_read() to userspace -- before pmbus_do_probe() has initialised the per-client PMBus state. Same latent hazard as the gpio_chip one fixed in the previous patch: once the nvmem device is registered, gpiolib's nvmem char-dev / sysfs interface is reachable, and any concurrent read triggers adm1266_nvmem_read() -> adm1266_nvmem_read_blackbox(), which issues PMBus traffic that races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_nvmem() down past pmbus_do_probe() so the nvmem device isn't reachable from userspace until the PMBus state the nvmem accessors depend on is fully initialised. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-5-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 4cce881a0b96f8b491f6626ed9c6fade58ea8e7a Author: Abdurrahman Hussain Date: Mon May 18 17:52:28 2026 -0700 hwmon: (pmbus/adm1266) register the gpio_chip after pmbus_do_probe() commit 491403b9b76cf66abd81301c5901aa4a4549f1e8 upstream. adm1266_probe() calls adm1266_config_gpio() -- which goes on to devm_gpiochip_add_data() and exposes the gpio_chip callbacks to gpiolib -- before pmbus_do_probe() has initialised the per-client PMBus state (notably the pmbus_lock mutex the core hands out via pmbus_get_data()). That ordering is already a latent hazard: any GPIO access that lands between adm1266_config_gpio() and the end of pmbus_do_probe() (for example a sysfs read from a user space agent that opens the gpiochip the instant gpiolib advertises it) races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_gpio() down past pmbus_do_probe() so the chip isn't reachable from userspace until the PMBus state it depends on is fully initialised. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-4-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 39c197f3c9be9a1fa91552e79d4cdb384c0d0f44 Author: Abdurrahman Hussain Date: Mon May 18 17:52:26 2026 -0700 hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple commit 3327a12aee9e10ffa903e28b8445dfd1af5307c0 upstream. adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop and then a second time before the PDIO_STATUS loop: *bits = 0; for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) { ... set_bit(gpio_nr, bits); } ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...); ... *bits = 0; for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) { ... set_bit(gpio_nr, bits); } The second *bits = 0 throws away every GPIO bit the first loop just populated, so callers asking for any combination of GPIO and PDIO pins always see the GPIO portion of the returned bits as zero. Drop the redundant second assignment so both halves of the result survive. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit b96c7f0bc0713dc6403912f6527d4ff9168d6fe6 Author: Abdurrahman Hussain Date: Mon May 18 17:52:25 2026 -0700 hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR commit d7834d92251baade796812876e95555e2066fa9f upstream. adm1266_gpio_get_multiple() iterates the PDIO portion of the caller-supplied mask using for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { ... } where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233), not the number of PDIO pins. The intended upper bound is ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25. gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip), so the iteration walks find_next_bit() up to 242, reading up to 217 extra bits (a handful of unsigned-long words: four on 64-bit, seven on 32-bit) of whatever lives past the end of the mask in the caller's stack. Any incidental set bit in that range then drives a set_bit(gpio_nr, bits) call that writes past the end of the caller-supplied bits array too -- both out-of-bounds. Substitute ADM1266_PDIO_NR for the constant so the scan stops at the last real PDIO bit. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-1-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 83e039f0a43e0708515b0479cb7690fb93faaaa0 Author: Abdurrahman Hussain Date: Fri May 15 15:11:51 2026 -0700 hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer commit 43cae21424ff8e33894a0f86c6b80b840c049fd7 upstream. adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-5-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit bd5be3fa5de6dbf61f1b3cec6b79c2c2f8065694 Author: Abdurrahman Hussain Date: Fri May 15 15:11:50 2026 -0700 hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer commit 487566cb1ccdf3756fdd7bf8d875e612ff3169bb upstream. adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-4-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 0e791cd0140fb136083565aadfbe0f705aa260d0 Author: Abdurrahman Hussain Date: Fri May 15 15:11:49 2026 -0700 hwmon: (pmbus/adm1266) reject implausible blackbox record_count commit 4afca954622d672ea65ed961bed01cf91caa034e upstream. adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-3-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 311f10de70dc3c0e240c61d7671ba4c5e3a3bd5f Author: Abdurrahman Hussain Date: Fri May 15 15:11:47 2026 -0700 hwmon: (pmbus/adm1266) seed timestamp from the real-time clock commit b86095e3d7dcf2bf80c747349a35912a87a85098 upstream. adm1266_set_rtc() seeds the chip's SET_RTC register from ktime_get_seconds(), which returns CLOCK_MONOTONIC -- i.e. seconds since the host last booted, not seconds since the Unix epoch. The chip stamps that value into every blackbox record it captures. Userspace reading those timestamps back expects wall-clock seconds: that's what the SET_RTC frame layout documents (datasheet Rev. D, Table 84) and what every other consumer of "seconds since epoch" assumes. Seeding from CLOCK_MONOTONIC gives blackbox records a timestamp that is only meaningful within a single boot of the host and silently resets to small values on every reboot. Switch to ktime_get_real_seconds() so the seed matches what the register is documented to hold. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-1-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 4dab98961426d0cf6a1599cda6950b7596ca2fcd Author: Sven Eckelmann Date: Sat May 2 19:53:21 2026 +0200 batman-adv: tt: fix negative tt_buff_len commit b64963a2ceeb7529310b6cf253a1e540784422f4 upstream. batadv_orig_node::tt_buff_len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_other_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit eb235472b52ef36981c5aad330485eaf2382c53b Author: Sven Eckelmann Date: Sat May 2 19:53:21 2026 +0200 batman-adv: tt: fix negative last_changeset_len commit fc92cdfcb295cefa4344d71a527d61b638b7bfc4 upstream. batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit c197d2601639b4920c19a5a226bafe0fd2a65016 Author: Sven Eckelmann Date: Wed May 13 23:38:54 2026 +0200 batman-adv: tp_meter: fix race condition in send error reporting commit 71dce47f0758537fff78fddb5fb0d4632d29b29f upstream. batadv_tp_sender_shutdown() previously used two separate variables to track session state: sending (an atomic flag indicating whether the session was active) and reason (a plain enum storing the stop reason). This introduced a race window between the two writes: after sending was cleared to 0, batadv_tp_send() could observe the stopped state and call batadv_tp_sender_end() before reason was written, causing the wrong stop reason to be reported to the caller. Fix this by consolidating both variables into a single atomic send_result, which holds 0 while the session is running and the stop reason once it ends. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit a9f0bfd624ee8a286d6fd2bf0f796e730efb49b0 Author: Sven Eckelmann Date: Sun May 10 11:31:03 2026 +0200 batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown commit 77098e4bea37af51d3962efa88a5af2ea5e1ac57 upstream. The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty. Cc: stable@kernel.org Fixes: 3d3cf6a7314a ("batman-adv: stop tp_meter sessions during mesh teardown") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit ecdaa3e4d91040206afe21bc8a0d1198a0971ff3 Author: Sven Eckelmann Date: Wed May 13 09:01:35 2026 +0200 batman-adv: tp_meter: avoid use of uninit sender vars commit 6c65cf23d4c6170fcf5714c32aa64689718cb142 upstream. batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit eeddd7bab3d59c1e98642a204141f8c5d6194707 Author: Sven Eckelmann Date: Sun May 10 11:43:20 2026 +0200 batman-adv: bla: fix report_work leak on backbone_gw purge commit 0459430add32ea41f3e2ef9351610e6d33627a6b upstream. batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Reviewed-by: Simon Wunderlich Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 5418be6c2e117bf8a316582795a8e3ff90f45e5d Author: Sven Eckelmann Date: Wed May 13 09:01:36 2026 +0200 batman-adv: frag: disallow unicast fragment in fragment commit bc62216dc8e221e3781afa14430f45208bfa9af9 upstream. batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a BATADV_UNICAST_FRAG packet is received. Once all fragments are collected and the packet is reassembled, batadv_recv_frag_packet() calls batadv_batman_skb_recv() again to process the defragmented payload. A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting). Each nesting level recurses through batadv_batman_skb_recv() without bound, growing the kernel stack until it is exhausted. Since refragmentation or fragments in fragments are not actually allowed, discard all packets which are still BATADV_UNICAST_FRAG packets after the defragmentation process. Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 01cefc5923889e29dbb5f281c3d457714ceb9c00 Author: Luxiao Xu Date: Mon May 11 18:52:09 2026 +0200 batman-adv: fix tp_meter counter underflow during shutdown commit 94f3b133168d1c49895e7cc6afbcf1cc0b354602 upstream. batadv_tp_sender_shutdown() unconditionally decrements the "sending" atomic counter. If multiple paths (e.g. timeout, user cancel, and normal finish) call this function, the counter can underflow to -1. Since the sender logic treats any non-zero value as "still sending", a negative value causes the sender kthread to loop indefinitely. This leads to a use-after-free when the interface is removed while the zombie thread is still active. Fix this by using atomic_xchg() to ensure the counter only transitions from 1 to 0 once. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei [sven: added missing change in batadv_tp_send] Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit e910dbf509125fe51ad68e4fa74dc8ab0a8e787a Author: Ruide Cao Date: Wed May 13 11:58:15 2026 +0800 batman-adv: fix fragment reassembly length accounting commit 9cd3f16c320bfdadd4509358122368deb56a5741 upstream. batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruide Cao Tested-by: Ren Wei Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 4d420d9ee70a220a2cd95aa0dd2e15acad66a505 Author: Sven Eckelmann Date: Wed May 13 09:01:34 2026 +0200 batman-adv: dat: handle forward allocation error commit 2d8826a2d3657cea66fb0370f9e521575a673871 upstream. batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb for each DHT candidate, but does not check the return value before passing it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences the skb unconditionally, so a failed allocation triggers a NULL pointer dereference. Skip forwarding to the current DHT candidate on allocation failure. Cc: stable@kernel.org Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 30bda3ef4b0cac777f1a7c314cd08b8ff6437365 Author: Ruijie Li Date: Thu May 14 16:13:25 2026 +0800 batman-adv: clear current gateway during teardown commit a340a51ed801eab7bb454150c226323b865263cc upstream. batadv_gw_node_free() removes the gateway list entries during mesh teardown, but it does not clear the currently selected gateway. This leaves stale gateway state behind across cleanup and can break a later mesh recreation. Clear bat_priv->gw.curr_gw before walking the gateway list so the selected gateway reference is dropped as part of teardown. Fixes: 2265c1410864 ("batman-adv: gateway election code refactoring") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruijie Li Signed-off-by: Zhanpeng Li Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit aef897c9d2dd0d9339167fb82b62beff68d076cb Author: Sven Eckelmann Date: Thu May 14 19:22:02 2026 +0200 batman-adv: mcast: fix use-after-free in orig_node RCU release commit 20c2d6a20ca936f5aaa6dd40f73f262ac45c87cc upstream. batadv_mcast_purge_orig() removes entries from RCU-protected hlists but does not wait for an RCU grace period before returning. Concurrent RCU readers may still accesses references to those entries at the point of removal. RCU-protected readers trying to operate on entries like orig->mcast_want_all_ipv6_node will then access already freed memory. Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(), just before the call_rcu() invocation. This ensures RCU readers that were active at purge time have drained before the orig_node memory is reclaimed. Cc: stable@kernel.org Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Acked-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 3265f3ed373fb8048be713aadcdf702579a0e53d Author: Harry Wentland Date: Thu May 7 16:26:31 2026 -0400 drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async commit 6c92f6d9600efa3ef0d9e560a2b52776d9803c29 upstream. [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. Assisted-by: GitHub Copilot:Claude claude-4-opus Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 67461e0c15335894cc5d3b84cda823bf8cbdc886 Author: Harry Wentland Date: Mon May 4 16:14:11 2026 -0400 drm/amd/display: Validate GPIO pin LUT table size before iterating commit 86d2b20644b11d21fe52c596e6e922b4590a3e3f upstream. [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. Assisted-by: GitHub Copilot:claude-opus-4-6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit c6e717e86dcc996382789fa28a81b9f732d909ff Author: Harry Wentland Date: Mon May 4 11:14:45 2026 -0400 drm/amd/display: Fix integer overflow in bios_get_image() commit cd86529ec61474a38c3837fb7823790a7c3f8cce upstream. [Why&How] The bounds check in bios_get_image() computes 'offset + size' using unsigned 32-bit arithmetic before comparing against bios_size. If a VBIOS image contains a near-UINT32_MAX offset the addition wraps to a small value, the comparison passes, and the function returns a wild pointer past the VBIOS mapping. Additionally, the comparison uses '<' (strict), which incorrectly rejects the valid exact-fit case where offset + size == bios_size. Fix both issues by restructuring the check to avoid the addition entirely: first reject if offset alone exceeds bios_size, then check size against the remaining space (bios_size - offset). This eliminates the overflow and correctly permits exact-fit accesses. Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit d40fb392af659c4a02b560319f226842f6ec1a95) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f8a17e6dbfc7036e6a774b850d0b3506ed0d96f7 Author: Osama Abdelkader Date: Thu Apr 30 21:56:59 2026 +0200 drm/bridge: megachips: remove bridge when irq request fails commit d45d5c819f2cd0b6b5d76a194a537a5f4aeefecb upstream. If devm_request_threaded_irq() fails after drm_bridge_add(), remove the bridge before returning. Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is tied to the STDP4028 device while ge_b850v3_register() may complete from either I2C probe; devm would not unwind the bridge if the other client's probe fails. Signed-off-by: Osama Abdelkader Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Tested-by: Ian Ray Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman commit 9cc969b3317ce0ea1ede035f4a14f68e4727b1bb Author: Julien Chauveau Date: Tue Mar 24 20:30:11 2026 +0100 drm/bridge: it66121: acquire reset GPIO in probe commit e02b5262fd288cc235f14e12233ea54e78c04611 upstream. The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset() calls gpiod_set_value() on it. However, the GPIO descriptor is never acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout the driver lifetime. gpiod_set_value() silently returns when passed a NULL descriptor, so the hardware reset sequence in it66121_hw_reset() is a no-op. This leaves the chip in an undefined state at probe time, which can prevent it from responding on the I2C bus. The DT binding marks reset-gpios as a required property, so all compliant device trees provide this GPIO. Add the missing devm_gpiod_get() call after enabling power supplies and before the hardware reset, so the chip is properly reset with power applied. Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Cc: stable@vger.kernel.org Signed-off-by: Julien Chauveau Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com Signed-off-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman commit f31edc6ee8d035209846c1019f22982e2260e47a Author: Alan Liu Date: Fri May 1 12:35:48 2026 +0800 drm/amdgpu/vpe: Force collaborate sync after TRAP commit b6074630a461b1322a814988779005cbc43612ea upstream. VPE1 could possibly hang and fail to power off at the end of commands in collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to force instances synchronized to avoid VPE1 fail to power off. Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alan liu Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171 Signed-off-by: Alex Deucher (cherry picked from commit a8b749c5c5afb7e5daa2bfb95d958fb3c6b8f055) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 7930eee22cd3df61e85be8aa512032ab303b7167 Author: Deepanshu Kartikey Date: Tue May 19 13:52:47 2026 +0530 drm/virtio: use uninterruptible resv lock for plane updates commit 9af1b6e175c82daf4b423da339a722d8e67a735a upstream. virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences(). Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271 Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().") Cc: stable@vger.kernel.org Signed-off-by: Deepanshu Kartikey Signed-off-by: Dmitry Osipenko Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com Signed-off-by: Greg Kroah-Hartman commit 34bf74b1fd2e4a44e27821a329204caf09df2976 Author: Bartosz Golaszewski Date: Wed May 6 13:57:00 2026 +0200 device property: set fwnode->secondary to NULL in fwnode_init() commit 215c90ee656114f5e8c32408228d97082f8e0eef upstream. If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitalized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. Cc: stable Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Signed-off-by: Bartosz Golaszewski Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Andy Shevchenko Reviewed-by: Sakari Ailus Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 0d1f6520c50e1d016bc0620aef8b47e39fdc7bfd Author: Huacai Chen Date: Thu May 21 20:58:40 2026 +0800 LoongArch: Remove unused code to avoid build warning commit 0ccc9d47cf020994097ff51827cebd04aa2b0bf4 upstream. After commit feee6b2989165631b1 ("mm/memory_hotplug: shrink zones when offlining memory"), __remove_pages() doesn't need the "zone" parameter so the "page" variable is also unused. Remove the unused code to avoid such build warning: arch/loongarch/mm/init.c: In function 'arch_remove_memory': arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=] 134 | struct page *page = pfn_to_page(start_pfn); Cc: Reviewed-by: Guo Ren Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit c7c0c0f4379dedec12d24dbb9dded5d2db7fd9f2 Author: Michael Bommarito Date: Wed May 13 13:53:24 2026 -0400 RDMA/siw: Reject MPA FPDU length underflow before signed receive math commit 0ce1bc9e46ecabe84772bb561e373c0d9876d6f2 upstream. A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Link: https://patch.msgid.link/r/20260513175325.2042630-2-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Acked-by: Bernard Metzler Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 1cd927002120678bd5d23c760246639caa53040e Author: Johan Hovold Date: Tue May 12 09:48:09 2026 +0200 spi: ti-qspi: fix use-after-free after DMA setup failure commit ea6ec3343e05f7937a53eb6d7617b3abdb4abc19 upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: c687c46e9e45 ("spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=17 Cc: stable@vger.kernel.org # 4.12 Cc: Vignesh R Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074809.915084-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit b6f1acf4e57ccf708cdc0cb70f5bb5b65162963b Author: Johan Hovold Date: Tue May 12 09:47:33 2026 +0200 spi: sprd: fix error pointer deref after DMA setup failure commit 3d67fffb74267772d461c02c67f1eff893ad547d upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=10 Cc: stable@vger.kernel.org # 5.1 Cc: Lanqing Liu Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074733.915029-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit b6c0dabea07e25bd7db19a77ebfd0d02b9e2671a Author: Johan Hovold Date: Tue May 12 09:48:49 2026 +0200 spi: ep93xx: fix error pointer deref after DMA setup failure commit 5e121a81667a83e9a01d62b429e340f5a4a84abc upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: e79e7c2df627 ("spi: ep93xx: add DT support for Cirrus EP93xx") Link: https://sashiko.dev/#/patchset/20260429091333.165363-1-johan%40kernel.org?part=10 Cc: stable@vger.kernel.org # 6.12 Cc: Nikita Shubin Signed-off-by: Johan Hovold Acked-by: Nikita Shubin Link: https://patch.msgid.link/20260512074849.915143-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit cb9e72c50e6c81a5903f27e0b397ce8525d7539b Author: Michael Bommarito Date: Sun Apr 19 17:04:20 2026 -0400 scsi: isci: Fix use-after-free in device removal path commit b52a8d52c3125ec9a93106ed816582368de34426 upstream. The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop(). Fixes: 6f231dda6808 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 09e5d2f2b12944d6a1d3400c98949f49487ac374 Author: Wayne Chang Date: Mon May 4 11:33:05 2026 +0800 phy: tegra: xusb: Fix per-pad high-speed termination calibration commit da110228b54f2e2143d97ea7151e0dc22e539d67 upstream. The existing code reads a single hs_term_range_adj value from bit field [10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly. However, on SoCs that support per-pad termination, each pad has its own hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3 in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13] respectively. Fix the calibration by reading per-pad values from the appropriate fuse registers. For SoCs that do not support per-pad termination, replicate pad 0's value to all pads to maintain existing behavior. Add a has_per_pad_term flag to the SoC data to indicate whether per-pad termination values are available in FUSE_USB_CALIB_EXT_0. Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Signed-off-by: Wei-Cheng Chen Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 8f9b61d255b1e989b8913b06c8ebe0aba5e1b238 Author: Johan Hovold Date: Tue May 12 09:43:34 2026 +0200 spi: qup: fix error pointer deref after DMA setup failure commit a7e8f3efd50a165ba0189f6dc57f7e51a7d149db upstream. The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=4 Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074334.914735-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 681f3cd45f2244fa29d30d8d106259ba46feb683 Author: Osama Abdelkader Date: Thu Apr 30 21:49:42 2026 +0200 drm/bridge: chipone-icn6211: use devm_drm_bridge_add in i2c probe commit 73d01051e8040c0b1de7fd26b3b8d0c2ffa6895c upstream. Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe. Signed-off-by: Osama Abdelkader Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman commit 0d1989c9b70b657c416ba4acd3840896b2dc2fde Author: Osama Abdelkader Date: Thu May 14 19:36:40 2026 +0200 riscv: kvm: return SBI_ERR_FAILURE for pmu_snapshot_set_shmem() when OOM commit 0835ee26938e15eccd70f7d33da386b6490f9449 upstream. kvm_riscv_vcpu_pmu_snapshot_set_shmem() returned -ENOMEM from the SBI extension handler, which caused kvm_riscv_vcpu_sbi_ecall() to abort KVM_RUN and surface the error to userspace instead of ompleting the ECALL with a negative SBI error in a0. Use SBI_ERR_FAILURE and the normal retdata path, matching other PMU handlers and kvm_sbi_ext_pmu_handler comment. Fixes: c2f41ddbcdd7 ("RISC-V: KVM: Implement SBI PMU Snapshot feature") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20260514173642.41448-1-osama.abdelkader@gmail.com Signed-off-by: Anup Patel Signed-off-by: Greg Kroah-Hartman commit 173fb86e5519dbe7aabed1f5fa7456152a4a2e38 Author: Michael Bommarito Date: Tue May 19 09:50:42 2026 -0400 KVM: arm64: vgic: Free private_irqs when init fails after allocation commit f19c354dbd457759dfcf1195ab4bdba2bb568323 upstream. Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy() call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The kvm_vgic_vcpu_init() failure path immediately above it has the same shape and still needs the same cleanup. Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private IRQs allocated before a redistributor iodev registration failure are released before the failed vCPU is freed. Fixes: 03b3d00a70b5 ("KVM: arm64: vgic: Allocate private interrupts on demand") Cc: stable@vger.kernel.org Cc: Will Deacon Reviewed-by: Yuan Yao Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/r/20260519135042.2219239-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit b94538186a3eae3763b8f96dacd610920a865aa7 Author: Michael Bommarito Date: Tue May 19 09:25:19 2026 -0400 KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits commit 9ce754ed8e7ab4e3999767ce1505f85c449ccb07 upstream. Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. Fixes: 57a9a117154c ("KVM: arm64: vgic-its: Device table save/restore") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/r/20260519132519.2142458-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 129ae7628f273e8825ba41057cb864eba53afacb Author: Vladimir Murzin Date: Fri May 15 14:37:29 2026 +0100 arm64: probes: Handle probes on hinted conditional branch instructions commit 2ccd8ff980b50e842481bae71102fa3883fc4377 upstream. BC.cond instructions introduced by FEAT_HBC cannot be executed out-of-line, like other branch instructions. However, they can be simulated in the same way as B.cond instructions. Extend the B.cond decoder mask to match BC.cond instructions as well, and handle them using the existing B.cond simulation path. Fixes: 7f86d128e437 ("arm64: add HWCAP for FEAT_HBC (hinted conditional branches)") Cc: Signed-off-by: Vladimir Murzin Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit 1a150947f8480262a46c860f1acb9c6597ca7097 Author: Masami Hiramatsu (Google) Date: Thu May 21 13:49:14 2026 +0900 tracing: Do not call map->ops->elt_free() if elt_alloc() fails commit 8f0f5c4fb9df0e19a341e0c6ed8dc4fda9124f03 upstream. In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. Link: https://sashiko.dev/#/patchset/20260520223101.34710-1-rosenp%40gmail.com Cc: stable@vger.kernel.org Cc: Tom Zanussi Cc: Mathieu Desnoyers Cc: Rosen Penev Reported-by: Sashiko Fixes: 2734b629525a ("tracing: Add per-element variable support to tracing_map") Link: https://patch.msgid.link/177933895460.108746.5396070821443932634.stgit@devnote2 Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit f2deaa2f409a4598eaa10f2a93a676c0632af248 Author: Zhihao Cheng Date: Tue May 19 17:18:05 2026 +0800 cifs: Fix busy dentry used after unmounting commit c68337442f03953237a94577beb468ab2662a851 upstream. Since commit 340cea84f691c ("cifs: open files should not hold ref on superblock"), cifs file only holds the dentry ref_cnt, the cifs file close work(cfile->deferred) could be executed after unmounting, which will trigger a warning in generic_shutdown_super: BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of cifs cifs] The detailed processs is: process A process B kworker fd = open(PATH) vfs_open file->__f_path = *path // dentry->d_lockref.count = 1 cifs_open cifs_new_fileinfo cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2 close(fd) __fput cifs_close queue_delayed_work(deferredclose_wq, cfile->deferred) dput(dentry) // dentry->d_lockref.count = 1 smb2_deferred_work_close _cifsFileInfo_put list_del(&cifs_file->flist) umount cleanup_mnt deactivate_super cifs_kill_sb cifs_close_all_deferred_files_sb cifs_close_all_deferred_files // cannot find cfile, skip _cifsFileInfo_put kill_anon_super generic_shutdown_super shrink_dcache_for_umount umount_check WARN ! // dentry->d_lockref.count = 1 cifsFileInfo_put_final dput(cifs_file->dentry) // dentry->d_lockref.count = 0 Fix it by flushing 'deferredclose_wq' before calling kill_anon_super. Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548. Fixes: 340cea84f691c ("cifs: open files should not hold ref on superblock") Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N Signed-off-by: Zhihao Cheng Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit f7d395dc5008168ac5b9c1ac2791e59a6078cca1 Author: Michael Bommarito Date: Fri May 15 11:17:18 2026 -0400 wifi: mac80211: consume only present negotiated TTLM maps commit a6e6ccd5bd07155c2add6c74ce1a5e68ad3b95ea upstream. ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 38bccb927d83d7d52e5b20015a172a0b6101d11e Author: Jann Horn Date: Mon May 18 18:51:30 2026 +0200 af_unix: Fix UAF read of tail->len in unix_stream_data_wait() commit be309f8eae8b474a4a617eaae01324da996fc719 upstream. unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without holding any lock that prevents SKBs on that queue from being dequeued and freed. This has been the case since commit 79f632c71bea ("unix/stream: fix peeking with an offset larger than data in queue"). The first consequence of this is that the pointer comparison `tail != last` can be false even if `last` semantically refers to an already-freed SKB while `tail` is a new SKB allocated at the same address; which can cause unix_stream_data_wait() to wrongly keep blocking after new data has arrived, but only in a weird scenario where a peeking recv() and a normal recv() on the same socket are racing, which is probably not a real problem. But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in the following race scenario (where test_setup() runs single-threaded, and afterwards, test_thread1() and test_thread2() run concurrently in two threads: ``` static int socks[2]; void test_setup(void) { socketpair(AF_UNIX, SOCK_STREAM, 0, socks); send(socks[1], "A", 1, 0); int peekoff = 1; setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff)); } void test_thread1(void) { char dummy; recv(socks[0], &dummy, 1, MSG_PEEK); } void test_thread2(void) { char dummy; recv(socks[0], &dummy, 1, 0); shutdown(socks[1], SHUT_WR); } ``` when racing like this: ``` thread1 thread2 unix_stream_read_generic mutex_lock(&u->iolock) skb_peek(&sk->sk_receive_queue) skb_peek_next(skb, &sk->sk_receive_queue) mutex_unlock(&u->iolock) unix_stream_read_generic unix_state_lock(sk) skb_peek(&sk->sk_receive_queue) unix_state_unlock(sk) unix_stream_data_wait unix_state_lock(sk) tail = skb_peek_tail(&sk->sk_receive_queue) spin_lock(&sk->sk_receive_queue.lock) __skb_unlink(skb, &sk->sk_receive_queue) spin_unlock(&sk->sk_receive_queue.lock) consume_skb(skb) [frees the SKB] `tail != last`: false `tail`: true `tail->len != last_len` ***UAF*** ``` Fix the UAF by removing the read of tail->len; checking tail->len would only make sense if SKBs in the receive queue of a UNIX socket could grow, which can no longer happen. Kuniyuki explained: > When commit 869e7c62486e ("net: af_unix: implement stream sendpage > support") added sendpage() support, data could be appended to the last > skb in the receiver's queue. > > That's why we needed to check if the length of the last skb was changed > while waiting for new data in unix_stream_data_wait(). > > However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and > commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use > MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added > to a new skb. That means this fix is not suitable for kernels before 6.5. Fixes: 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets") Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Jann Horn Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260518-b4-unix-recv-wait-hotfix-v2-1-83e29ce8ad31@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 67915715fd3874057457363c87c63e18829527df Author: John Walker Date: Thu May 7 17:07:20 2026 -0600 wifi: cfg80211: advance loop vars in cfg80211_merge_profile() commit 7666dbb1bacc4ba522b96740cba7283d243d16e1 upstream. cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. Cc: stable@vger.kernel.org Fixes: fe806e4992c9 ("cfg80211: support profile split between elements") Signed-off-by: John Walker Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 77ad1b13dce2acffa07861bc7e8a662ba7e956f7 Author: Grzegorz Nitka Date: Fri May 15 11:24:13 2026 -0700 ice: restore PTP Rx timestamp config after ethtool set-channels commit 975b564d195b13ca6ee1ef5e6a9561734898eb17 upstream. When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and rebuilds the VSI, reallocating Rx rings. The newly allocated rings have ptp_rx cleared, so RX hardware timestamps are no longer attached to skb until hwtstamp configuration is applied again. Restore timestamp mode after ice_vsi_open() in the queue reconfiguration path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings have PTP RX timestamping re-enabled. Testing hints: - run ptp4l application in client synchronization mode: ptp4l -i ethX -m -s - run PTP traffic - change queue number on ethX netdev interface: ethtool -L ethX combined new_queue_size - observe ptp4l output - expected result: no "received DELAY_REQ without timestamp" messages Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov Signed-off-by: Grzegorz Nitka Reviewed-by: Simon Horman Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit f3c21a62be39d48e6337137cd52906b8ad6722df Author: Marcin Szycik Date: Fri May 15 11:24:10 2026 -0700 ice: fix setting promisc mode while adding VID filter commit ebc8de716c9ec2be384abdc2dd866da26c6580d1 upstream. There are at least two paths through which VSI promiscuous mode can be independently configured via ice_fltr_set_vsi_promisc(): - ice_vlan_rx_add_vid() (netdev op) - ice_service_task() -> ... -> ice_set_promisc() Both paths may try to program promiscuous mode concurrently. One such scenario is: 1. Add ice netdev to bond 2. Add the bond netdev to bridge 3. ice netdev enters allmulticast mode (IFF_ALLMULTI) 4. Service task programs promisc mode filter 5. Bridge -> bond calls ice_vlan_rx_add_vid() Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc() returns any error, including -EEXIST. This causes VLAN filtering setup to fail on the bond interface. ice_set_promisc() already handles -EEXIST correctly. Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the promisc filter is already programmed, continue without returning error. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Cc: stable@vger.kernel.org Signed-off-by: Marcin Szycik Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8201bf45cc7c1c1a09290c4db8ab1e19801f8fec Author: Sam Daly Date: Wed May 13 18:42:53 2026 +0200 octeontx2-af: CGX: add bounds check to cgx_speed_mbps index commit c0bf0a4f3f1f5f57aa83e1400ba4f56f0abfd542 upstream. cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham Cc: Linu Cherian Cc: Geetha sowjanya Cc: hariprasad Cc: Subbaraya Sundeep Cc: Andrew Lunn Cc: stable Signed-off-by: Sam Daly Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 82d3acee88593e3d9e71cad4b7d6b3cf70de9d07 Author: Stephen Smalley Date: Wed May 13 14:05:06 2026 -0400 lsm: hold cred_guard_mutex for lsm_set_self_attr() commit 4a9b16541ad3faf8bccb398532bf3f8b6bbf1188 upstream. Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley Acked-by: Casey Schaufler Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 3427d7ae38337066ce88b68302e285d344ab756b Author: Ilya Dryomov Date: Tue May 19 23:07:26 2026 +0200 rbd: eliminate a race in lock_dwork draining on unmap commit 9fc75b71fdd38465c76c6f6a884cdd4ae3c72d90 upstream. Given how rbd_lock_add_request() and rbd_img_exclusive_lock() are written, lock_dwork may be (re)queued more than it's actually needed: for example in case a new I/O request comes in while we are in the middle of rbd_acquire_lock() on behalf of another I/O request. This is expected and with rbd_release_lock() preemptively canceling lock_dwork is benign under normal operation. A more problematic example is maybe_kick_acquire(): if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) { dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev); mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0); } It's not unrealistic for lock_dwork to get canceled right after delayed_work_pending() returns true and for mod_delayed_work() to requeue it right there anyway. This is a classic TOCTOU race. When it comes to unmapping the image, there is an implicit assumption of no self-initiated exclusive lock activity past the point of return from rbd_dev_image_unlock() which unlocks the lock if it happens to be held. This unlock is assumed to be final and lock_dwork (as well as all other exclusive lock tasks, really) isn't expected to get queued again. However, lock_dwork is canceled only in cancel_tasks_sync() (i.e. later in the unmap sequence) and on top of that the cancellation can get in effect nullified by maybe_kick_acquire(). This may result in rbd_acquire_lock() executing after rbd_dev_device_release() and rbd_dev_image_release() run and free and/or reset a bunch of things. One of the possible failure modes then is a violated rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); in rbd_dev_header_info() which is called via rbd_dev_refresh() from rbd_post_acquire_action(). Redo exclusive lock task draining to provide saner semantics and try to meet the assumptions around rbd_dev_image_unlock(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Reviewed-by: Viacheslav Dubeyko Signed-off-by: Greg Kroah-Hartman commit a244395d8c563ed1bb26c3ef708db6aeeaa08084 Author: Michael Bommarito Date: Fri May 15 11:24:14 2026 -0700 ixgbevf: fix use-after-free in VEPA multicast source pruning commit 5d49b568c188dc77199d8d2b959c91da8cc27cf1 upstream. ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 145e9afa5b905229b4788bb72c3255f5a5f77508 Author: Michael Bommarito Date: Tue May 12 16:51:14 2026 -0400 ipv4: raw: reject IP_HDRINCL packets with ihl < 5 commit 915fab69823a14c170dbaa3b41978768e0fe62fc upstream. raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Suggested-by: Herbert Xu Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/77ec2b5e8111961c2c39883c92e8aa2709039c17.1778614451.git.michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5a999541a29067e4c3a5c4c18fec2d199ddde74b Author: Kyle Farnung Date: Wed May 13 21:52:12 2026 -0700 wifi: ath11k: clear shared SRNG pointer state on restart commit f51e4b3b5574ad8cb5b16b11f8a1452147ece87a upstream. LMAC rings reuse the shared rdp/wrp pointer buffers without going through the normal SRNG hw-init path that zeros non-LMAC ring pointers. After restart, ath11k_hal_srng_clear() can therefore hand stale hp/tp state from the previous firmware instance back to the new one. Clear the shared pointer buffers while keeping the allocations in place so restart still avoids reallocating SRNG DMA memory, but starts with fresh ring-pointer state. Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman commit 06fa755325df9f2b0a8701bf0a56586d0e84f7c6 Author: Stefano Garzarella Date: Mon May 18 11:06:55 2026 +0200 vsock/virtio: reset connection on receiving queue overflow commit a4f0b001782b21663d10df983b4b208195bec66c upstream. When there is no more space to queue an incoming packet, the packet is silently dropped. This causes data loss without any notification to either peer, since there is no retransmission. Under normal circumstances, this should never happen. However, it could happen if the other peer doesn't respect the credit, or if the skb overhead, which we recently began to take into account with commit 059b7dbd20a6 ("vsock/virtio: fix potential unbounded skb queue"), is too high. Fix this by resetting the connection and setting the local socket error to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a packet, so both peers are explicitly notified of the failure rather than silently losing data. Fixes: ae6fcfbf5f03 ("vsock/virtio: discard packets if credit is not respected") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 47e63077605c6c2aa45b3df9847a8cdc1f1f6ef9 Author: Minh Nguyen Date: Tue May 19 17:23:10 2026 +0700 vsock/vmci: fix UAF when peer resets connection during handshake commit 99e22ddf4edb63dc8382bc028af928056d3450cf upstream. vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Cc: stable@vger.kernel.org Signed-off-by: Minh Nguyen Acked-by: Bryan Tan Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 902daac307eb7e1955ce05b071950f3cba88c963 Author: Justin Iurman Date: Sun May 17 20:30:59 2026 +0200 ipv6: ioam: add NULL check for idev in ipv6_hop_ioam() commit d4ea0dfd75011b78cebf3808f98ac4c4f51a6fb9 upstream. Reported by Sashiko: The function ipv6_hop_ioam() accesses __in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr via RCU, __in6_dev_get() can return NULL during interface teardown, which could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop option. Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e513591bce4c39f056d30faff7c5ed4247c9d0c0 Author: Steven Rostedt Date: Wed May 20 22:08:01 2026 -0400 ring-buffer: Fix reporting of missed events in iterator commit a254b6d13b0edd6272926674d2afc46d46e496b7 upstream. When tracing is active while reading the trace file, if the iterator reading the buffer detects that the writer has passed the iterator head, it will reset and set a "missed events" flag. This flag is passed to the output processing to show the user that events were missed: CPU:4 [LOST EVENTS] The problem is that the flag is reset after it is checked in ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU ring buffers and it will check if they are dropped when figuring out which buffer to print next. This prematurely clears the missed_events flag if the CPU buffer with the missed events is not the one that is printed next. On the iteration where the CPU buffer with the missed events is printed, the check if it had missed events would return false and the output does not show that events were missed. Do not reset the missed_events flag when checking if there were missed events, but instead clear it when moving the iterator head to the next event. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora Fixes: c9b7a4a72ff64 ("ring-buffer/tracing: Have iterator acknowledge dropped events") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit bdf678a273cadbccc347f331ae2e93ff4d14834c Author: Dawei Feng Date: Wed May 20 15:03:23 2026 +0800 qed: fix double free in qed_cxt_tables_alloc() commit 2bccfb8476ca5f3548afbd623dc7a6980d4e77de upstream. If one of the later PF or VF CID bitmap allocations fails, qed_cid_map_alloc() jumps to cid_map_fail and frees the previously allocated CID bitmaps before returning an error. qed_cxt_tables_alloc() then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free() again. Fix this by setting each CID bitmap pointer to NULL after bitmap_free() to avoid double free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime reproduction was not attempted because exercising the failing allocation path requires device-specific setup. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5e40919a40cb3e590ed45c2a54a4a2518aa88a99 Author: Michael Bommarito Date: Mon May 18 14:34:47 2026 -0400 l2tp: use list_del_rcu in l2tp_session_unhash commit 979c017803c40829b03acd9e5236e354b7622360 upstream. An unprivileged local user can pin a host CPU indefinitely in l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace suffices; on any host that has l2tp_core loaded the trigger is reachable from a standard `unshare -Urn` sandbox. l2tp_session_unhash() removes a session from tunnel->session_list with list_del_init(), but that list is walked by l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under rcu_read_lock_bh(). list_del_init() leaves the deleted entry's next/prev self-pointing; a reader that has loaded the entry and then advances pos->list.next reads &session->list, container_of()s back to the same session, and list_for_each_entry_rcu() never reaches the list head. The CPU stays in strcmp() inside the walker, with BH and preemption disabled, so RCU grace periods on the host stall behind it and the wedged thread cannot be killed (SIGKILL is delivered on syscall return). Use list_del_rcu() to match the existing list_add_rcu() in l2tp_session_register(); the deleted session remains visible to in-flight walkers with consistent next/prev pointers until kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list has exactly one list_del_init() call site; the list_del_init (&session->clist) at l2tp_core.c:533 operates on the per-collision list, which is not walked under RCU. list_empty(&session->list) is not used anywhere in net/l2tp/ after the unhash point, so dropping the post-delete self-init is safe; the fix has no userspace-visible behavior change. Fixes: 89b768ec2dfef ("l2tp: use rcu list add/del when updating lists") Cc: stable@vger.kernel.org # 6.11+ Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3a718675d6af4992e34ffe86b8f36d471a5afe0e Author: Konstantin Komarov Date: Thu May 28 11:23:27 2026 +0800 fs/ntfs3: handle attr_set_size() errors when truncating files [ Upstream commit 576248a34b927e93b2fd3fff7df735ba73ad7d01 ] If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state. Signed-off-by: Konstantin Komarov [ Minor context conflict resolved. ] Signed-off-by: Bin Lan Signed-off-by: Greg Kroah-Hartman commit 5d1bfb716421d7bf2f9a5dfd6950555e46b738d7 Author: Guopeng Zhang Date: Fri May 22 09:03:03 2026 -0400 cgroup/cpuset: Reset DL migration state on can_attach() failure [ Upstream commit 4a39eda5fdd867fc39f3c039714dd432cee00268 ] cpuset_can_attach() accumulates temporary SCHED_DEADLINE migration state in the destination cpuset while walking the taskset. If a later task_can_attach() or security_task_setscheduler() check fails, cgroup_migrate_execute() treats cpuset as the failing subsystem and does not call cpuset_cancel_attach() for it. The partially accumulated state is then left behind and can be consumed by a later attach, corrupting cpuset DL task accounting and pending DL bandwidth accounting. Reset the pending DL migration state from the common error exit when ret is non-zero. Successful can_attach() keeps the state for cpuset_attach() or cpuset_cancel_attach(). Fixes: 2ef269ef1ac0 ("cgroup/cpuset: Free DL BW in case can_attach() fails") Cc: stable@vger.kernel.org # v6.10+ Signed-off-by: Guopeng Zhang Signed-off-by: Tejun Heo Reviewed-by: Chen Ridong Reviewed-by: Waiman Long [ omitted upstream context line `cs->dl_bw_cpu = cpu;` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cf396941901858b0de426cdcd3974eea6a02c98c Author: Tejun Heo Date: Thu May 21 10:52:11 2026 -0400 sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path [ Upstream commit 9a415cc53711f2238e0f0ca8a6bcc796c003b127 ] In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error() dereferences p->comm and p->pid. If the iterator's reference is the last drop, the task is freed synchronously and the deref becomes a UAF. Move put_task_struct() past scx_error(). Reported-by: Sashiko Closes: https://lore.kernel.org/all/20260511214031.AF5E9C2BCB0@smtp.kernel.org/ Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class") Cc: stable@vger.kernel.org # v6.12+ Signed-off-by: Tejun Heo [ adapted fix to pre-refactor scx_ops_enable_workfn() with scx_task_iter_relock() instead of upstream scx_root_enable_workfn() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ccf6754887b42c98b2cb4bb45072f11603f598f6 Author: Samuele Mariotti Date: Thu May 21 10:52:10 2026 -0400 sched_ext: Fix missing warning in scx_set_task_state() default case [ Upstream commit b905ee77d5f557a83a485b4146210f54f13365fc ] In scx_set_task_state(), the default case was setting the warn flag, but then returning immediately. This is problematic because the only purpose of the warn flag is to trigger WARN_ONCE, but the early return prevented it from ever firing, leaving invalid task states undetected and untraced. To fix this, a WARN_ONCE call is now added directly in the default case. The fix addresses two aspects: - Guarantees the invalid task states are properly logged and traced. - Provides a distinct warning message ("sched_ext: Invalid task state") specifically for states outside the defined scx_task_state enum values, making it easier to distinguish from other transition warnings. This ensures proper detection and reporting of invalid states. Signed-off-by: Samuele Mariotti Signed-off-by: Paolo Valente Reviewed-by: Andrea Righi Signed-off-by: Tejun Heo Stable-dep-of: 9a415cc53711 ("sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 870d59e2cf218e7418491e26bad768cb16654582 Author: Yizhou Zhao Date: Tue May 12 01:30:41 2026 +0800 netfilter: nft_inner: Fix IPv6 inner_thoff desync commit b6a91f68ebfed9c38e0e9150f58a9b85da07181c upstream. In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization. Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: GLM:5.1 Z.ai Signed-off-by: Yizhou Zhao Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 02f75f041a93ea045834da89cd3234f4c1d749b4 Author: Nan Li Date: Tue May 12 16:50:01 2026 +0800 netfilter: ipset: stop hash:* range iteration at end commit 0d3a282ab5f165fc207ff49ea5b6ad8f54616bd6 upstream. The following hash set variants: hash:ip,mark hash:ip,port hash:ip,port,ip hash:ip,port,net iterate IPv4 ranges with a 32-bit iterator. The iterator must stop once the last address in the requested range has been processed. Advancing it once more can move the traversal state past the end of the request, so a later retry may continue from an unintended position. Handle the iterator increment explicitly at the end of the loop and stop once the upper bound has been processed. This keeps the existing retry behaviour intact for valid ranges while preventing traversal from continuing past the original boundary. Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Nan Li Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 3823c27099cfe2482299065814adbaa771be9644 Author: Haoze Xie Date: Fri May 15 11:19:02 2026 +0800 netfilter: nf_queue: hold bridge skb->dev while queued commit e196115ec330a18de415bdb9f5071aa9f08e53ce upstream. br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Haoze Xie Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit db0250470f023f159094052c0bd5ab026a88ae93 Author: Zhengchuan Liang Date: Wed May 13 15:57:17 2026 +0800 netfilter: ip6t_hbh: reject oversized option lists commit 4322dcde6b4173c2d8e8e6118ed290794263bcc8 upstream. struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors, but hbh_mt6_check() does not reject larger optsnr values supplied from userspace. Validate optsnr in the rule setup path so only match data that fits the fixed-size opts array can be installed. This follows the existing xtables pattern of rejecting invalid user-provided counts in checkentry() and keeps the packet matching path unchanged. `struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array, where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible: [ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29 [ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 11de9b935377c6dc73c58ec60208dfd185967dc9 Author: Jonas Jelonek Date: Fri May 15 14:31:03 2026 +0000 net: pse-pd: fix sign on -ENOENT check in of_load_pse_pis() commit 33d35975cbead3fa6b738ee57e5e45e14fbe0886 upstream. of_count_phandle_with_args() returns the count on success and a negative errno on failure, including -ENOENT when the "pairsets" property is absent. The existing comparison in of_load_pse_pis() checks against ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any error return: legitimate DTs that omit "pairsets" trigger a spurious "wrong number of pairsets" error and probe fails with -EINVAL. Compare against -ENOENT so a missing "pairsets" property is correctly treated as "this PI has no pairsets, continue". Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs") Cc: stable@vger.kernel.org Signed-off-by: Jonas Jelonek Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 301a554e458e2f5ec47f2c336a7cb03b877f9fd6 Author: Michael Bommarito Date: Wed May 13 21:37:39 2026 -0400 net: ifb: report ethtool stats over num_tx_queues commit 5db89c99566fc4728cc92e941d8e1975711e24b5 upstream. ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB per-queue RX and TX stats live in those entries: ifb_xmit() updates txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates txp->tx_stats, and ifb_stats64() aggregates both over dev->num_tx_queues. The ethtool stats callbacks instead size and walk the per-queue stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With an asymmetric device where the RX queue count exceeds the TX queue count, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10 ifb_get_ethtool_stats() indexes past the tx_private allocation and copies adjacent slab data through ETHTOOL_GSTATS. Use dev->num_tx_queues consistently for the stats strings, the stats count, and the stats data walks. This reports one RX stats group and one TX stats group for each backing ifb_q_private entry, which is the queue set IFB can actually populate. Reproduced under UML+KASAN at v7.1-rc2: BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae Read of size 8 at addr 0000000062dbd228 by task ethtool/36 ifb_fill_stats_data+0x3c/0xae ifb_get_ethtool_stats+0xc0/0x129 __dev_ethtool+0x1ca5/0x363c dev_ethtool+0x123/0x1b3 dev_ioctl+0x56c/0x744 sock_do_ioctl+0x15f/0x1b2 sock_ioctl+0x4d5/0x50a sys_ioctl+0xd8b/0xde9 With the patch applied, the same UML+KASAN repro is silent and ethtool -S ifb10 reports only the stats backed by the single allocated tx_private entry. Fixes: a21ee5b2fcb8 ("net: ifb: support ethtools stats") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260514013739.3549624-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit a212fc08f5c48a16a94092bf0a9a8b7cf4483b11 Author: Nicolai Buchwitz Date: Wed May 20 20:43:20 2026 +0200 net: bcmgenet: keep RBUF EEE/PM disabled commit 9a1730245e416d11ad5c0f2c100061d61cc43f60 upstream. Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. Link: https://github.com/raspberrypi/linux/issues/7304 Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Cc: stable@vger.kernel.org Signed-off-by: Nicolai Buchwitz Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit bd795f106b3889fb0706c6e4831c4b27e2b5666b Author: Zijing Yin Date: Tue May 19 10:26:33 2026 -0700 phonet/pep: disable BH around forwarded sk_receive_skb() commit dbc81608e3a653dea6cf403f20cae35468b8ab9c upstream. The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c Cc: stable@vger.kernel.org Signed-off-by: Zijing Yin Acked-by: Rémi Denis-Courmont Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 85f8674cae82053f1e6bab295f6a8422cca14db5 Author: Jiexun Wang Date: Wed May 6 19:43:30 2026 +0800 Bluetooth: serialize accept_q access commit e83f5e24da741fa9405aeeff00b08c5ee7c37b88 upstream. bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Jann Horn Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Signed-off-by: Jiexun Wang Reviewed-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit a6c75a3fad226ccbd8ef9110dee87c92c299f2ab Author: Michael Bommarito Date: Fri May 15 10:38:19 2026 -0400 Bluetooth: MGMT: validate Add Extended Advertising Data length commit d3f7d17960ed50df3a6709c5158caff989c8c905 upstream. MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data. Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit ed5fcd2a26f0c16fc289c8cd6b03328a0582a687 Author: Michael Bommarito Date: Mon May 11 08:26:41 2026 -0400 Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer commit 3374ef8cf99368a40f7efd51a2a375a4c5dc6f0d upstream. Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure() from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the size and source-pointer arguments to l2cap_send_cmd(): - struct { - struct l2cap_ecred_reconf_req req; - __le16 scid; - } pdu; + DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1); ... l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ, sizeof(pdu), &pdu); After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous union pdu_u plus a local pointer "pdu" pointing at it. Therefore: - sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on 64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]). - &pdu is the address of the local pointer's stack storage, not the address of the request payload. l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet body therefore contains 8 bytes copied from the kernel stack starting at &pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel stack address to the paired Bluetooth peer. The intended (mtu, mps, scid) fields are not transmitted at all, so the peer rejects the request as malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken for the local-side initiator since the introducing commit landed. The sibling site l2cap_ecred_conn_req() in the same commit was converted correctly (sizeof(*pdu) + len, pdu); only this site was missed. Restore the original semantics: pass the full flex-struct size via struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as the source. Validated on a stock 7.0-based host kernel via the real call path: setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ whose body is 8 bytes (the on-stack pdu local's value) rather than the expected 6. Three captures from fresh socket / fresh hciemu peer on the same host -- low bytes vary per call, high 0xffff confirms a kernel virtual address (KASLR-randomised stack slot, not a fixed string): RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff After this patch the body is 6 bytes carrying the expected little-endian (mtu, mps, scid). Cc: stable@vger.kernel.org Fixes: 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 81c7a3c22a0f2808cf4ae0b4908f59763b23606d Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon May 18 10:49:49 2026 +0800 Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths commit c1bb9336ae6b54a5f6a353c4bd4ed9a4307e429b upstream. Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. Fixes: 3b799254cf6f ("Bluetooth: hci_uart: Cancel init work before unregistering") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit b21805258d7e926adfd455fc820a447b90da3b82 Author: Jann Horn Date: Tue May 12 22:15:39 2026 +0200 Bluetooth: bnep: Fix UAF read of dev->name commit 59e932ded949fa6f0340bf7c6d7818f962fa4fd2 upstream. bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.) Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 39f4a82e80c8f5ed2d6952d73fbafc895721a728 Author: David Carlier Date: Fri May 15 07:25:25 2026 +0100 Bluetooth: ISO: drop ISO_END frames received without prior ISO_START commit 84c24fb151fc1179355296d7ff29129ac7c42129 upstream. ISO data PDUs carry a packet-boundary flag indicating START, CONT, END or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing ISO_START by checking conn->rx_len before touching conn->rx_skb, but ISO_END does not. If a peer sends an ISO_END as the first packet on a fresh ISO connection, conn->rx_skb is still NULL and conn->rx_len is zero, so skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS, where receivers sync to a broadcaster without pairing, any broadcaster on the air can trigger this. Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment is logged and dropped instead of crashing the host. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 87c543e2f78d0871f271df92dab98901bbd5b6f5 Author: Safa Karakuş Date: Sat May 16 21:15:04 2026 +0300 Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() commit ab1513597c6cf17cd1ad2a21e3b045421b48e022 upstream. bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang Reviewed-by: Siwei Zhang Signed-off-by: Safa Karakuş Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 583fd5a8fc797c8ecf2e1a7b923740c5e5734e85 Author: Abdun Nihaal Date: Tue May 19 11:57:39 2026 +0530 net: wwan: iosm: fix potential memory leaks in ipc_imem_init() commit c5d93b2c40355e999715262a824965aac025a427 upstream. The memory allocated in ipc_protocol_init() is not freed on the error paths that follow in ipc_imem_init(). Fix that by calling the corresponding release function ipc_protocol_deinit() in the error path. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 898ea8abfa10d4f69c68ac57703d8240cd9b531d Author: Luiz Capitulino Date: Mon Apr 27 12:03:51 2026 -0400 selftests/mm: run_vmtests.sh: fix destructive tests invocation commit 3432cbb291aabf85f8af4b9d1ec37179168ff999 upstream. Destructive tests should be invoked with -d command-line option, but this won't work today since 'd' is missing in getopts command-line. This commit fixes it. Link: https://lore.kernel.org/214fd9e4-5398-4c26-859e-c982c2e277c3@redhat.com Fixes: f16ff3b692ad ("selftests/mm: run_vmtests.sh: add missing tests") Signed-off-by: Luiz Capitulino Reviewed-by: Mike Rapoport (Microsoft) Reviewed-by: SeongJae Park Cc: David Hildenbrand Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit b8ab30c79fc00147125b9c39f928561d9dd13d06 Author: Muchun Song Date: Tue Apr 28 16:52:17 2026 +0800 mm/memory_hotplug: fix memory block reference leak on remove commit 93866f55f7e292fe3d47d36c9efe5ee10213a06b upstream. Patch series "mm: Fix memory block leaks and locking", v2. This series fixes two memory block device reference leaks and one locking issue around the per-memory_block hwpoison counter. This patch (of 2): remove_memory_blocks_and_altmaps() looks up each memory block with find_memory_block(), which acquires a reference to the memory block device. That reference is never dropped on this path, resulting in a leaked device reference when removing memory blocks and their altmaps. Drop the reference after retrieving mem->altmap and clearing mem->altmap, before removing the memory block device. Link: https://lore.kernel.org/20260428085219.1316047-1-songmuchun@bytedance.com Link: https://lore.kernel.org/20260428085219.1316047-2-songmuchun@bytedance.com Fixes: 6b8f0798b85a ("mm/memory_hotplug: split memmap_on_memory requests across memblocks") Signed-off-by: Muchun Song Acked-by: Oscar Salvador Acked-by: David Hildenbrand (Arm) Cc: Danilo Krummrich Cc: Greg Kroah-Hartman Cc: "Huang, Ying" Cc: Miaohe Lin Cc: Naoya Horiguchi Cc: "Rafael J. Wysocki" Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 769723124b7c3b2bfea4cf68ad292698b87c8d01 Author: Justin Iurman Date: Wed May 20 14:42:42 2026 +0200 ipv6: ioam: refresh hdr pointer before ioam6_event() commit e46e6bc97fb1f339730ff1ba74267fbf48e7a422 upstream. Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. Fixes: f655c78d6225 ("net: exthdrs: ioam6: send trace event") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ce60d9452a0f2effa72fd20ea270c59ca691d455 Author: Muchun Song Date: Tue Apr 28 16:52:18 2026 +0800 drivers/base/memory: fix memory block reference leak in poison accounting commit 03a2cc1756a0570f887d624cd6c535ea0cbd4951 upstream. memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison. Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com Fixes: 5033091de814 ("mm/hwpoison: introduce per-memory_block hwpoison counter") Signed-off-by: Muchun Song Reviewed-by: Miaohe Lin Acked-by: Oscar Salvador Acked-by: David Hildenbrand (Arm) Cc: Danilo Krummrich Cc: Greg Kroah-Hartman Cc: "Huang, Ying" Cc: Naoya Horiguchi Cc: "Rafael J. Wysocki" Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 954518e5a4a5efc5033253f6e36fc7b9f98363a3 Author: Heechan Kang Date: Sun May 17 03:47:09 2026 +0900 io_uring/waitid: clear waitid info before copying it to userspace commit 93d93f5f8da791e98159795c6ef683f45bd95d13 upstream. IORING_OP_WAITID stores its result fields in struct io_waitid::info and later copies them to userspace siginfo. The prep path initializes the request arguments, but it does not initialize info itself. If the wait operation completes without reporting a child event, the common wait code can return without writing wo_info. In that case io_waitid_finish() still copies iw->info to userspace, exposing stale bytes from the reused io_kiocb command storage. Clear the result storage during prep so the io_uring path matches the regular waitid syscall, which uses a zero-initialized struct waitid_info. Fixes: f31ecf671ddc ("io_uring: add IORING_OP_WAITID support") Cc: stable@vger.kernel.org # 6.7+ Signed-off-by: Heechan Kang Link: https://patch.msgid.link/20260516184709.852814-1-gganji11@naver.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 6996e954ae830f5b793ba6cf449885ca519dbdd2 Author: Ard Biesheuvel Date: Tue May 19 10:03:00 2026 +0200 efi: Allocate runtime workqueue before ACPI init commit 13c6da02e767152c9ac4330962247a5e47011035 upstream. Since commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") ACPI PRM calls are delegated to a workqueue which runs in a kernel thread, making it easier to detect and mitigate faulting memory accesses performed by the firmware. Rafael reports that such PRM accesses may occur before efisubsys_init() executes, which is where the workqueue is allocated, leading to NULL pointer dereferences. Since acpi_init() [which triggers the early PRM accesses] executes as a subsys_initcall() as well, and has its own dependencies that may be sensitive to initcall ordering, deferring acpi_init() is not an option. So instead, split off the workqueue allocation into its own postcore initcall, as this is the only missing piece to allow EFI runtime calls to be made. This ensures that EFI runtime call (including PRM calls) are accessible to all code running at subsys_initcall() level. Cc: Fixes: 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") Reviewed-by: Rafael J. Wysocki (Intel) Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 8778386e4387b28f2bf8425d7ffc667c6294457f Author: Takashi Iwai Date: Fri May 15 10:55:58 2026 +0200 ALSA: asihpi: Fix potential OOB array access at reading cache commit 7b7d6572145c1dab2dd9bfb550b188e5f0ff3c3f upstream. find_control() to retrieve a cached info accesses the array with the given index blindly, which may lead to an OOB array access. Add a sanity check for avoiding it. Link: https://sashiko.dev/#/patchset/20260511230121.28606-1-rosenp%40gmail.com Cc: Link: https://patch.msgid.link/20260515085606.242284-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit ce836587e594af39ff048d9b29dee0f5f10692c9 Author: Takashi Iwai Date: Sun May 17 18:51:20 2026 +0200 ALSA: pcm: Don't setup bogus iov_iter for silencing commit e4d3386b74fba8e01280484b67ee481ece00201e upstream. At transition to the iov_iter for PCM data transfer, we blindly applied the iov_iter setup also for silencing (i.e. data = NULL), and it leads to a calculation of bogus iov_iter. Fortunately this didn't cause troubles on most of architectures but it goes wrong on RISC-V now, causing a NULL dereference. Handle the NULL data case to treat the silencing in interleaved_copy() for addressing the bug above. noninterleaved_copy() has already the NULL data handling, so it doesn't need changes. Reported-by: Jiakai Xu Closes: https://lore.kernel.org/20260515051516.3103036-1-xujiakai24@mails.ucas.ac.cn Fixes: cf393babb37a ("ALSA: pcm: Add copy ops with iov_iter") Cc: Link: https://patch.msgid.link/20260517165121.31399-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit be81fc4e8f9af734e39bd2cbf67327b769043f98 Author: Cássio Gabriel Date: Tue May 19 00:32:15 2026 -0300 ALSA: ua101: Reject too-short USB descriptors commit b59d5c51bb328a60749b4dd5fe7e649bfb4089b4 upstream. find_format_descriptor() walks the class-specific interface extras by advancing with bLength. It rejects descriptors that extend past the remaining buffer, but it does not reject descriptor lengths smaller than a USB descriptor header. Reject too-short descriptors before using bLength to advance the local scan. This keeps the UA-101 parser robust against malformed descriptor data and matches the usual USB descriptor walking rules. Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260519-alsa-ua101-desc-len-v1-1-4307d1a5e054@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 2b7a698d5093b548c464828d984f05ced5f3fd2a Author: Abdurrahman Hussain Date: Fri May 15 15:11:48 2026 -0700 hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX commit eee213daa1e1b402eb631bcd1b8c5aa340a6b081 upstream. adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-2-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 7a5d2fadee710219ec89e5ad775f25264d300c74 Author: ChenXiaoSong Date: Mon May 18 15:23:22 2026 +0000 smb/server: promote S_DEL_ON_CLS to S_DEL_PENDING when close commit 4ec9c8e023c79f613fe4d5ad8cc737112efb2e44 upstream. Reproducer: 1. server: systemctl start ksmbd 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: C program: openat(AT_FDCWD, "/mnt", O_RDWR | O_TMPFILE, 0600) Do not treat `FILE_DELETE_ON_CLOSE_LE` as delete pending while files remain open. This patch fixes xfstests generic/004. Cc: stable@vger.kernel.org Link: https://chenxiaosong.com/en/smb-xfstests-generic-004.html Co-developed-by: Huiwen He Signed-off-by: Huiwen He Signed-off-by: ChenXiaoSong Tested-by: Steve French Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 6f10c47b159705acdb6e8a3e15d3df42931cca51 Author: Jeremy Erazo Date: Fri May 15 19:31:41 2026 +0000 smb: client: use data_len for SMB2 READ encrypted folioq copy commit d4d76c9ee1997cc8c977a63f6c43551c253c1066 upstream. In handle_read_data() the encrypted/folioq branch (buf_len <= data_offset, reached via receive_encrypted_read for transform PDUs > CIFSMaxBufSize + MAX_HEADER_SIZE) copies the READ payload using buffer_len rather than data_len: rdata->result = cifs_copy_folioq_to_iter(buffer, buffer_len, cur_off, &rdata->subreq.io_iter); ... rdata->got_bytes = buffer_len; buffer_len comes from the SMB3 transform header OriginalMessageSize field (OriginalMessageSize - read_rsp_size); it represents the size of the decrypted message after the SMB2 header. data_len comes from the SMB2 READ response DataLength field; it represents the actual READ payload size and may be smaller than buffer_len when the decrypted message contains padding or other trailing bytes after the READ payload. The existing check `data_len > buffer_len - pad_len` only enforces an upper bound, so a server that emits OriginalMessageSize larger than read_rsp_size + pad_len + data_len passes the check and the kernel copies buffer_len bytes per response, ignoring the server-asserted DataLength. Two observable failures with a crafted server (DataLength=4, buffer_len=20000): - the kernel returns 20000 bytes per sub-request to userspace and sets got_bytes = buffer_len, even though the response claimed only 4 bytes of payload; - on a partial netfs sub-request whose iterator is sized to data_len, the over-large copy_folio_to_iter() short-reads, cifs_copy_folioq_to_iter() returns -EIO via the n != len path, and the entire netfs read collapses to -EIO even though the leading sub-requests succeeded. Use data_len for the copy length and for got_bytes so the kernel honours the server-asserted READ payload size. For well-formed servers (where buffer_len == pad_len + data_len) the change is behaviour-equivalent. Cc: stable@vger.kernel.org Signed-off-by: Jeremy Erazo Acked-by: David Howells Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 13fb413ae22a37c69341918a6d651d19a9b0b9b7 Author: Henrique Carvalho Date: Thu May 14 20:18:25 2026 -0300 smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() commit 4d8690dace005a38e6dbde9ecce2da3ad85c7c41 upstream. Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked(). Cc: stable@vger.kernel.org Fixes: 96c4af418586 ("cifs: Fix locking usage for tcon fields") Reviewed-by: Shyam Prasad N Signed-off-by: Henrique Carvalho Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit a3238b09c58f323e40743ce174cd0ab81b5c09ed Author: Michael Bommarito Date: Sun May 17 20:11:50 2026 -0400 smb: client: require net admin for CIFS SWN netlink commit d1ebfce2c1d161186a82e77590bf7da2ea1bce91 upstream. CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. Fixes: fed979a7e082 ("cifs: Set witness notification handler for messages from userspace daemon") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit f0e5c9c663badc9982e6941322eef1cb17de0f11 Author: Junyi Liu Date: Tue May 19 16:12:04 2026 +0900 ksmbd: validate SID in parent security descriptor during ACL inheritance commit 69f030cf95488ae1186c72ac8c66fd279664ea7f upstream. Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory. Cc: stable@vger.kernel.org Signed-off-by: Junyi Liu Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 519fb0a42ce5d7e46935577309fb282a5f2c6ea3 Author: Ferry Meng Date: Mon May 11 21:18:16 2026 +0800 ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow commit af92ee994cc7f7e83a41c2025f32257a2f82a7ef upstream. Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak. Fixes: 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") Cc: stable@vger.kernel.org Signed-off-by: Ferry Meng Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 0836081b394ca074d1b910f2b990ff7b4b4404c7 Author: Jeremy Laratro Date: Wed May 13 08:26:16 2026 +0900 ksmbd: fix null pointer dereference in compare_guid_key() commit 4b83cbc4c15f09b000cc06f033f64b0824b6dc87 upstream. session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Cc: stable@vger.kernel.org Signed-off-by: Jeremy Laratro Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 30a361be33f3793b9ecbd10ab7be6d0564819b79 Author: SeongJae Park Date: Sun Apr 26 10:36:12 2026 -0700 mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() commit d4e7b5c4cc353f154d5ab8bb2e1ce7714d77a6e9 upstream. damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260426173625.86521-1-sj@kernel.org Link: https://lore.kernel.org/20260423004148.74722-1-sj@kernel.org [1] Fixes: 29cbb9a13f05 ("mm/damon/sysfs-schemes: implement scheme filters") Signed-off-by: SeongJae Park Cc: # 6.3.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 57b285e0368290aa55f79ba11419b96d0ebdb418 Author: Greg Kroah-Hartman Date: Wed May 20 15:05:04 2026 +0200 sysfs: don't remove existing directory on update failure commit 237557b8a81ab948e8332f7c0058e758f081c0a3 upstream. When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry. Cc: Rajat Jain Fixes: c855cf2759d2 ("sysfs: Fix internal_create_group() for named group updates") Cc: stable Assisted-by: gkh_clanker_t1000 Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Danilo Krummrich Link: https://patch.msgid.link/2026052003-uniquely-hastily-c093@gregkh Signed-off-by: Greg Kroah-Hartman commit 9d651c29530b1944970f8eced30b2637d5c9ce7e Author: Lukas Bulwahn Date: Tue May 26 19:24:40 2026 +0000 arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL commit f458b2165d7ac0f2401fff48f19c8f864e7e1e38 upstream. Commit a3ed4157b7d8 ("fgraph: Replace fgraph_ret_regs with ftrace_regs") replaces the config HAVE_FUNCTION_GRAPH_RETVAL with the config HAVE_FUNCTION_GRAPH_FREGS, and it replaces all the select commands in the various architecture Kconfig files. In the arm64 architecture, the commit adds the 'select HAVE_FUNCTION_GRAPH_FREGS', but misses to remove the 'select HAVE_FUNCTION_GRAPH_RETVAL', i.e., the select on the replaced config. Remove selecting the replaced config. No functional change, just cleanup. Fixes: a3ed4157b7d8 ("fgraph: Replace fgraph_ret_regs with ftrace_regs") Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20250117125522.99071-1-lukas.bulwahn@redhat.com Signed-off-by: Will Deacon Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit acf04e2863132f6d9222f71f3a76fb9782cbe061 Author: Guenter Roeck Date: Wed May 27 10:22:30 2026 +0800 hwmon: (pmbus/core) Protect regulator operations with mutex [ Upstream commit 754bd2b4a084b90b5e7b630e1f423061a9b9b761 ] The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h. Cc: Sanman Pradhan Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Reviewed-by: Sanman Pradhan Signed-off-by: Guenter Roeck Signed-off-by: Fang Wang <32840572@qq.com> Signed-off-by: Sasha Levin commit 7ed384db061a264bd806898f7ccab9b98b591488 Author: Pu Lehui Date: Tue May 26 19:25:17 2026 +0000 riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler commit 67a5ba8f742f247bc83e46dd2313c142b1383276 upstream. Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [] return_to_handler+0x16/0x26 [ 127.704009] [] return_to_handler+0x0/0x26 [ 127.704057] [] common_nsleep+0x42/0x54 [ 127.704117] [] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [] do_trap_ecall_u+0x188/0x218 [ 127.704295] [] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results. Fixes: a3ed4157b7d8 ("fgraph: Replace fgraph_ret_regs with ftrace_regs") Reported-by: Linux Kernel Functional Testing Closes: https://lore.kernel.org/all/CA+G9fYvp_oAxeDFj88Tk2rfEZ7jtYKAKSwfYS66=57Db9TBdyA@mail.gmail.com Signed-off-by: Pu Lehui Reviewed-by: Alexandre Ghiti Tested-by: Björn Töpel Reviewed-by: Masami Hiramatsu (Google) Link: https://lore.kernel.org/r/20250317031214.4138436-2-pulehui@huaweicloud.com Signed-off-by: Alexandre Ghiti Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit eda3d0d1b56bf2d6311ac3ebdd8efb6e3696cafb Author: Pu Lehui Date: Tue May 26 19:26:35 2026 +0000 riscv: fgraph: Select HAVE_FUNCTION_GRAPH_TRACER depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS commit e8eb8e1bdae94b9e003f5909519fd311d0936890 upstream. Currently, fgraph on riscv relies on the infrastructure of DYNAMIC_FTRACE_WITH_ARGS. However, DYNAMIC_FTRACE_WITH_ARGS may be turned off on riscv, which will cause the enabled fgraph to be abnormal. Therefore, let's select HAVE_FUNCTION_GRAPH_TRACER depends on HAVE_DYNAMIC_FTRACE_WITH_ARGS. Fixes: a3ed4157b7d8 ("fgraph: Replace fgraph_ret_regs with ftrace_regs") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202503160820.dvqMpH0g-lkp@intel.com/ Signed-off-by: Pu Lehui Reviewed-by: Björn Töpel Link: https://lore.kernel.org/r/20250317031214.4138436-1-pulehui@huaweicloud.com Signed-off-by: Alexandre Ghiti Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit 5869f7eb3428ea3449311089d5b0039056a4d5a0 Author: Lu Baolu Date: Tue May 26 19:24:01 2026 +0000 iommu/vt-d: Draining PRQ in sva unbind path when FPD bit set commit cf08ca81d08a04b3b304e8fb4e052f323a09783d upstream. When a device uses a PASID for SVA (Shared Virtual Address), it's possible that the PASID entry is marked as non-present and FPD bit set before the device flushes all ongoing DMA requests and removes the SVA domain. This can occur when an exception happens and the process terminates before the device driver stops DMA and calls the iommu driver to unbind the PASID. There's no need to drain the PRQ in the mm release path. Instead, the PRQ will be drained in the SVA unbind path. But in such case, intel_pasid_tear_down_entry() only checks the presence of the pasid entry and returns directly. Add the code to clear the FPD bit and drain the PRQ. Fixes: c43e1ccdebf2 ("iommu/vt-d: Drain PRQs when domain removed from RID") Suggested-by: Kevin Tian Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20241217024240.139615-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit 77cc16f889938f3f72989e01f8cd5ae1c645ee4f Author: Jiri Olsa Date: Tue May 26 19:23:24 2026 +0000 x86/fgraph: Fix return_to_handler regs.rsp value commit 8bc11700e0d23d4fdb7d8d5a73b2e95de427cabc upstream. The previous change (Fixes commit) messed up the rsp register value, which is wrong because it's already adjusted with FRAME_SIZE, we need the original rsp value. This change does not affect fprobe current kernel unwind, the !perf_hw_regs path perf_callchain_kernel: if (perf_hw_regs(regs)) { if (perf_callchain_store(entry, regs->ip)) return; unwind_start(&state, current, regs, NULL); } else { unwind_start(&state, current, NULL, (void *)regs->sp); } which uses pt_regs.sp as first_frame boundary (FRAME_SIZE shift makes no difference, unwind stil stops at the right frame). This change fixes the other path when we want to unwind directly from pt_regs sp/fp/ip state, which is coming in following change. Fixes: 20a0bc10272f ("x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe") Signed-off-by: Jiri Olsa Signed-off-by: Andrii Nakryiko Reviewed-by: Steven Rostedt (Google) Link: https://lore.kernel.org/bpf/20260126211837.472802-2-jolsa@kernel.org Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit 8c7d9f3ca1f3d7bb62d3ccb5c4447ed66321bf57 Author: Jianbo Liu Date: Tue May 26 19:22:14 2026 +0000 net/mlx5e: Use ip6_dst_lookup instead of ipv6_dst_lookup_flow for MAC init commit e35d7da8dd9e55b37c3e8ab548f6793af0c2ab49 upstream. Replace ipv6_stub->ipv6_dst_lookup_flow() with ip6_dst_lookup() in mlx5e_ipsec_init_macs() since IPsec transformations are not needed during Security Association setup - only basic routing information is required for nexthop MAC address resolution. This resolves an issue where XfrmOutNoStates error counter would be incremented when xfrm policy is configured before xfrm state, as the IPsec-aware routing function would attempt policy checks during SA initialization. Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization") Signed-off-by: Jianbo Liu Reviewed-by: Leon Romanovsky Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1765284977-1363052-7-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit 21a8aa77c2ff439b631ffd1856017aa1d5d32ed4 Author: Jianbo Liu Date: Tue May 26 19:21:20 2026 +0000 net/mlx5e: Trigger neighbor resolution for unresolved destinations commit 9ab89bde13e5251e1d0507e1cc426edcdfe19142 upstream. When initializing the MAC addresses for an outbound IPsec packet offload rule in mlx5e_ipsec_init_macs, the call to dst_neigh_lookup is used to find the next-hop neighbor (typically the gateway in tunnel mode). This call might create a new neighbor entry if one doesn't already exist. This newly created entry starts in the INCOMPLETE state, as the kernel hasn't yet sent an ARP or NDISC probe to resolve the MAC address. In this case, neigh_ha_snapshot will correctly return an all-zero MAC address. IPsec packet offload requires the actual next-hop MAC address to program the rule correctly. If the neighbor state is INCOMPLETE when the rule is created, the hardware rule is programmed with an all-zero destination MAC address. Packets sent using this rule will be subsequently dropped by the receiving network infrastructure or host. This patch adds a check specifically for the outbound offload path. If neigh_ha_snapshot returns an all-zero MAC address, it proactively calls neigh_event_send(n, NULL). This ensures the kernel immediately sends the initial ARP or NDISC probe if one isn't already pending, accelerating the resolution process. This helps prevent the hardware rule from being programmed with an invalid MAC address and avoids packet drops due to unresolved neighbors. Fixes: 71670f766b8f ("net/mlx5e: Support routed networks during IPsec MACs initialization") Signed-off-by: Jianbo Liu Reviewed-by: Leon Romanovsky Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/1765284977-1363052-8-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit d4e78c6119d7085d86021e80fb48c660837ba71f Author: Feng Yang Date: Tue May 26 19:20:12 2026 +0000 tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64 commit fd2f74f8f3d3c1a524637caf5bead9757fae4332 upstream. When using bpf_program__attach_kprobe_multi_opts on ARM64 to hook a BPF program that contains the bpf_get_stackid function, the BPF program fails to obtain the stack trace and returns -EFAULT. This is because ftrace_partial_regs omits the configuration of the pstate register, leaving pstate at the default value of 0. When get_perf_callchain executes, it uses user_mode(regs) to determine whether it is in kernel mode. This leads to a misjudgment that the code is in user mode, so perf_callchain_kernel is not executed and the function returns directly. As a result, trace->nr becomes 0, and finally -EFAULT is returned. Therefore, the assignment of the pstate register is added here. Fixes: b9b55c8912ce ("tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs") Closes: https://lore.kernel.org/bpf/20250919071902.554223-1-yangfeng59949@163.com/ Signed-off-by: Feng Yang Tested-by: Jiri Olsa Acked-by: Masami Hiramatsu (Google) Signed-off-by: Will Deacon Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit a4cb26be376466335d9d94b8d7c4ec5fcbb55811 Author: Sasha Levin Date: Wed May 27 12:48:54 2026 -0400 Revert "ice: Remove jumbo_remove step from TX path" This reverts commit 7332d208c9d2067546eb7af5339773c966ac5625. Signed-off-by: Sasha Levin commit 9454e60067ec3711a2d2a0bcf56867d59f7d3975 Author: Sasha Levin Date: Wed May 27 12:48:53 2026 -0400 Revert "ice: fix double-free of tx_buf skb" This reverts commit fd95ef8d0f6dbe2daa95d6488c9e0f8a95a7e048. Signed-off-by: Sasha Levin commit 798317eab3f45d92acffdb54b88a6614f3030d14 Author: Ian Rogers Date: Tue Oct 1 20:20:06 2024 -0700 perf parse-events: Expose/rename config_term_name [ Upstream commit d2f3ecb0ca2099d13bf8bf69219214c1425dc453 ] Expose config_term_name as parse_events__term_type_str so that PMUs not in pmu.c may access it. Signed-off-by: Ian Rogers Acked-by: Namhyung Kim Link: https://lore.kernel.org/r/20241002032016.333748-4-irogers@google.com Signed-off-by: Namhyung Kim Signed-off-by: Sasha Levin commit ba9e12cd5b965c29f8a2c4f837372af3c6c262b5 Author: Niklas Cassel Date: Thu May 14 09:39:02 2026 +0200 ata: libata-scsi: do not needlessly defer commands when using PMP with FBS commit 759e8756da00aa115d504a18155b1d1ee1cc12e8 upstream. The ACS specification does not allow a non-NCQ command to be issued while an NCQ command is outstanding. Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") introduced a feature where a deferred non-NCQ command gets issued from a workqueue. The design stores a single non-NCQ command per port. However, when using Port Multipliers (PMPs), specifically PMPs that support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed on the same port, just not for the same link, see e.g. ata_std_qc_defer() which is, and always has operated on a per-link basis. Therefore, move the deferred_qc from struct ata_port to struct ata_link. This way, when using a PMP with FBS, we will not needlessly defer commands to all other links, just because one link issued a non-NCQ command while having an NCQ command outstanding. Only commands for that specific link will be deferred. This is in line with how PMPs with FBS worked before commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation"). Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit 91d1d273bd3f21b40a691590cf5a8504bb373649 Author: Niklas Cassel Date: Thu May 14 09:39:01 2026 +0200 ata: libata-scsi: do not use the deferred QC feature on PMPs with CBS commit f233124fb36cd57ef09f96d517a38ab4b902e15e upstream. When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you can only issue commands to one link at a time. For PMPs with CBS, there is already code to handle commands being sent to different links in sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes use of ap->excl_link. A user on the list reported that commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") broke PMPs with CBS. The commit introduced code that stores a deferred qc in ap->deferred_qc, to later be issued via a workqueue. It turns out that this change is incompatible with the existing ap->excl_link handling used by PMPs with CBS. Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via workqueue is not used for this return value. This way, PMPs with CBS will work once again. Note that the starvation referenced in commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") can only happen on libsas ports, and libsas does not support Port Multipliers, thus there is no harm of reverting back to the previous way of deferring commands for PMPs with CBS. Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal drive or a PMP with FBS) will continue using the deferred workqueue, since it does result in lower completion latencies for non-NCQ commands, even though the workqueue is not strictly needed to avoid starvation for non-libsas ports. If we want to modify the scope of the workqueue issuing to also handle PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ commands in ap->deferred_qc, while also removing the existing PMP CBS handling using ap->excl_link, such that we don't duplicate features. While at it, also add a comment explaining how the ap->excl_link mechanism works. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reported-by: Tommy Kelly Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/ Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit f056f06e8068b02c3963a0630b3303638d799b46 Author: Niklas Cassel Date: Thu May 14 09:39:00 2026 +0200 ata: libata-scsi: do not use the deferred QC feature for ATA_DEFER_PORT commit ce4548807d2e4ae48fd0dbe38865467369877913 upstream. The deferred QC feature was meant to handle mixed NCQ and non-NCQ commands, i.e. for return value ATA_DEFER_LINK. ATA_DEFER_PORT is returned by PATA drivers, but also certain SATA drivers like sata_mv and sata_sil24 that uses ap->excl_link to workaround hardware bugs in these HBAs. Regardless of the reason, using the deferred QC feature for ATA_DEFER_PORT is always wrong, and will break the ap->excl_link usage of the SATA drivers that rely on that feature. Modify ata_scsi_qc_issue() to only use the deferred QC feature when mixing NCQ and non-NCQ commands, i.e. ATA_DEFER_LINK. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit d8be1499ada04a56a22ec0ea371ab2a8566afd2f Author: Niklas Cassel Date: Thu May 14 09:38:59 2026 +0200 ata: libata-scsi: improve readability of ata_scsi_qc_issue() commit 360190bd965f93794d5f5685a6de22ce6da2b672 upstream. Improve readability of ata_scsi_qc_issue(). No functional changes. Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman commit a3bbda6502a9398b816fa2e71c9a3f955f58013d Author: Asim Viladi Oglu Manizada Date: Sat May 16 21:15:39 2026 +0000 smb: client: reject userspace cifs.spnego descriptions commit 3da1fdf4efbc490041eb4f836bf596201203f8f2 upstream. cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. Fixes: f1d662a7d5e5 ("[CIFS] Add upcall files for cifs to use spnego/kerberos") Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix Reviewed-by: David Howells Signed-off-by: Asim Viladi Oglu Manizada Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 50257450196e4bba11c562117847ea409660a7de Author: Alessio Belle Date: Tue May 26 09:13:07 2026 +0100 drm/imagination: Synchronize interrupts before suspending the GPU commit 2d7f05cddf4c268cc36256a2476946041dbdd36d upstream. The runtime PM suspend callback doesn't know whether the IRQ handler is in progress on a different CPU core and doesn't wait for it to finish. Depending on timing, the IRQ handler could be running while the GPU is suspended, leading to it being killed when trying to access GPU registers. See example signature below. In a power off sequence initiated by the runtime PM suspend callback, wait for any IRQ handlers in progress on other CPU cores to finish, by calling synchronize_irq(). This version of the patch contains only the part of the upstream commit that applies to 6.12; the rest was a revert of code added in 6.16. The second paragraph above is different because on 6.12 this kind of bug doesn't seem to crash the entire kernel, only the IRQ handler, leaving the driver unusable in practice. The crash signature below is also different, both because of the above, and because there was no support for TI AM68 SK in 6.12. Example signature on a TI AM62 SK platform: [ 7827.189088] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [ 7827.197311] Modules linked in: [ 7827.222015] CPU: 0 UID: 0 PID: 461 Comm: irq/405-gpu Tainted: G M 6.12.90 #5 [ 7827.230461] Tainted: [M]=MACHINE_CHECK [ 7827.234203] Hardware name: Texas Instruments AM625 SK (DT) [ 7827.239682] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 7827.246637] pc : pvr_device_irq_thread_handler+0x64/0x180 [powervr] [ 7827.252941] lr : irq_thread_fn+0x2c/0xa8 [ 7827.256872] sp : ffff800082d8bd50 [ 7827.260179] x29: ffff800082d8bd70 x28: ffff8000800ce374 x27: ffff800081829cc0 [ 7827.267328] x26: ffff000004701e80 x25: ffff000005b884ac x24: ffff000005bd5780 [ 7827.274472] x23: ffff00000da40bc0 x22: ffff00000da40ba0 x21: ffff800082d8bd58 [ 7827.281614] x20: ffff00000da40000 x19: ffff000004701e80 x18: 08000000c6af9003 [ 7827.288750] x17: 0000000000000010 x16: 0000000000000068 x15: 0df234008df66400 [ 7827.295886] x14: 0000000000000000 x13: 000005c68f6e7191 x12: 000000000000025e [ 7827.303020] x11: 00000000000000c0 x10: 0000000000000ac0 x9 : ffff800082d8bd00 [ 7827.310157] x8 : ffff000005bd62a0 x7 : ffff000077261380 x6 : 00000000000005c6 [ 7827.317292] x5 : 000000000000425e x4 : 0000000000000000 x3 : 0000000000000000 [ 7827.324428] x2 : 00000000000008a8 x1 : ffff800082d608a8 x0 : ffff000005bd5780 [ 7827.331568] Call trace: [ 7827.334011] pvr_device_irq_thread_handler+0x64/0x180 [powervr] [ 7827.339954] irq_thread_fn+0x2c/0xa8 [ 7827.343530] irq_thread+0x16c/0x2f4 [ 7827.347019] kthread+0x110/0x114 [ 7827.350248] ret_from_fork+0x10/0x20 [ 7827.353834] Code: f9446682 f943c281 b9404442 8b020021 (b9400021) [ 7827.359921] ---[ end trace 0000000000000000 ]--- [ 7827.364820] genirq: exiting task "irq/405-gpu" (461) is an active IRQ thread (irq 405) [ 8011.230278] powervr fd00000.gpu: Job timeout [ 8011.230350] powervr fd00000.gpu: Job timeout [ 8011.230426] powervr fd00000.gpu: Job timeout Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support") Fixes: 96822d38ff57 ("drm/imagination: Handle Rogue safety event IRQs") Cc: stable@vger.kernel.org Signed-off-by: Alessio Belle Reviewed-by: Matt Coster Link: https://patch.msgid.link/20260310-drain-irqs-before-suspend-v1-1-bf4f9ed68e75@imgtec.com Signed-off-by: Matt Coster Signed-off-by: Sasha Levin commit e3dd56fb5683ba80bf8d7a2f9aa21cfa53f05202 Author: Kuniyuki Iwashima Date: Tue May 26 13:45:49 2026 +0800 af_unix: Give up GC if MSG_PEEK intervened. [ Upstream commit e5b31d988a41549037b8d8721a3c3cae893d8670 ] Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls. Fixes: 118f457da9ed ("af_unix: Remove lock dance in unix_peek_fds().") Reported-by: Igor Ushakov Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260311054043.1231316-1-kuniyu@google.com Signed-off-by: Jakub Kicinski [ Using include/net/af_unix.h instead of net/unix/af_unix.h on 6.12.y ] Signed-off-by: Leon Chen Signed-off-by: Sasha Levin commit 95f072ef934ca00711d510676b8792cbf59a5aae Author: DaeMyung Kang Date: Tue Apr 28 23:08:56 2026 +0900 ksmbd: close durable scavenger races against m_fp_list lookups [ Upstream commit bf736184d063da1a552ffeff0481813599a182cc ] ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. * checkpatch --strict * make -j$(nproc) M=fs/smb/server Fixes: d484d621d40f ("ksmbd: add durable scavenger timer") Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin commit d7fd56ed5e07e053a5eea6112d61fcaded653b87 Author: Peter Zijlstra (Intel) Date: Fri Oct 10 00:17:27 2025 +0530 sched/deadline: Stop dl_server before CPU goes offline [ Upstream commit ee6e44dfe6e50b4a5df853d933a96bdff5309e6e ] IBM CI tool reported kernel warning[1] when running a CPU removal operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1" WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170 NIP [c0000000002b6ed8] cpudl_set+0x58/0x170 LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 Call Trace: [c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable) [c0000000002b7cb8] dl_server_timer+0x168/0x2a0 [c00000000034df84] __hrtimer_run_queues+0x1a4/0x390 [c00000000034f624] hrtimer_interrupt+0x124/0x300 [c00000000002a230] timer_interrupt+0x140/0x320 Git bisects to: commit 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck") This happens since: - dl_server hrtimer gets enqueued close to cpu offline, when kthread_park enqueues a fair task. - CPU goes offline and drmgr removes it from cpu_present_mask. - hrtimer fires and warning is hit. Fix it by stopping the dl_server before CPU is marked dead. [1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/ [2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr [sshegde: wrote the changelog and tested it] Fixes: 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck") Closes: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com Signed-off-by: Peter Zijlstra (Intel) Reported-by: Venkat Rao Bagalkote Signed-off-by: Shrikanth Hegde Signed-off-by: Peter Zijlstra (Intel) Tested-by: Marek Szyprowski Tested-by: Shrikanth Hegde Signed-off-by: Sasha Levin commit 4e315eb1727bb7cb2e789459c08651c7ffd52ef9 Author: Peter Zijlstra Date: Mon May 25 23:11:17 2026 +0200 sched/deadline: Fix dl_server behaviour commit a3a70caf7906708bf9bbc80018752a6b36543808 upstream. John reported undesirable behaviour with the dl_server since commit: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling"). When starving fair tasks on purpose (starting spinning FIFO tasks), his fair workload, which often goes (briefly) idle, would delay fair invocations for a second, running one invocation per second was both unexpected and terribly slow. The reason this happens is that when dl_se->server_pick_task() returns NULL, indicating no runnable tasks, it would yield, pushing any later jobs out a whole period (1 second). Instead simply stop the server. This should restore behaviour in that a later wakeup (which restarts the server) will be able to continue running (subject to the CBS wakeup rules). Notably, this does not re-introduce the behaviour cccb45d7c4295 set out to solve, any start/stop cycle is naturally throttled by the timer period (no active cancel). Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling") Reported-by: John Stultz Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Peter Zijlstra (Intel) Tested-by: John Stultz Closes: https://lore.kernel.org/regressions/04657838-46d1-432d-95e1-eb73b930b032@mailbox.org Signed-off-by: Lukas Beckmann Signed-off-by: Sasha Levin commit 030167dcadf50a9f9dac4de6fa4c34f4f7afeed7 Author: Peter Zijlstra Date: Mon May 25 23:11:16 2026 +0200 sched/deadline: Fix dl_server getting stuck commit 4ae8d9aa9f9dc7137ea5e564d79c5aa5af1bc45c upstream. John found it was easy to hit lockup warnings when running locktorture on a 2 CPU VM, which he bisected down to: commit cccb45d7c429 ("sched/deadline: Less agressive dl_server handling"). While debugging it seems there is a chance where we end up with the dl_server dequeued, with dl_se->dl_server_active. This causes dl_server_start() to return without enqueueing the dl_server, thus it fails to run when RT tasks starve the cpu. When this happens, dl_server_timer() catches the '!dl_se->server_has_tasks(dl_se)' case, which then calls replenish_dl_entity() and dl_server_stopped() and finally return HRTIMER_NO_RESTART. This ends in no new timer and also no enqueue, leaving the dl_server 'dead', allowing starvation. What should have happened is for the bandwidth timer to start the zero-laxity timer, which in turn would enqueue the dl_server and cause dl_se->server_pick_task() to be called -- which will stop the dl_server if no fair tasks are observed for a whole period. IOW, it is totally irrelevant if there are fair tasks at the moment of bandwidth refresh. This removes all dl_se->server_has_tasks() users, so remove the whole thing. Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling") Reported-by: John Stultz Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Peter Zijlstra (Intel) Tested-by: John Stultz [ adjust renamed variable in fair_server_has_tasks (which this patch removes) ] Signed-off-by: Lukas Beckmann Signed-off-by: Sasha Levin commit 4275cfb662e4f51360b64fd62b464ff14d1cbd96 Author: Huacai Chen Date: Mon May 25 23:11:14 2026 +0200 sched/deadline: Fix dl_server_stopped() commit 4717432dfd99bbd015b6782adca216c6f9340038 upstream. Commit cccb45d7c429 ("sched/deadline: Less agressive dl_server handling") introduces dl_server_stopped(). But it is obvious that dl_server_stopped() should return true if dl_se->dl_server_active is 0. Fixes: cccb45d7c429 ("sched/deadline: Less agressive dl_server handling") Signed-off-by: Huacai Chen Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20250809130419.1980742-1-chenhuacai@loongson.cn Signed-off-by: Lukas Beckmann Signed-off-by: Sasha Levin commit d290b02d7ccccbae69c44c02574bba5f4d0ceec8 Author: Peter Zijlstra Date: Mon May 25 23:11:13 2026 +0200 sched/deadline: Less agressive dl_server handling commit cccb45d7c4295bbfeba616582d0249f2d21e6df5 upstream. Chris reported that commit 5f6bd380c7bd ("sched/rt: Remove default bandwidth control") caused a significant dip in his favourite benchmark of the day. Simply disabling dl_server cured things. His workload hammers the 0->1, 1->0 transitions, and the dl_server_{start,stop}() overhead kills it -- fairly obviously a bad idea in hind sight and all that. Change things around to only disable the dl_server when there has not been a fair task around for a whole period. Since the default period is 1 second, this ensures the benchmark never trips this, overhead gone. Fixes: 557a6bfc662c ("sched/fair: Add trivial fair server") Reported-by: Chris Mason Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Juri Lelli Acked-by: Juri Lelli Link: https://lkml.kernel.org/r/20250702121158.465086194@infradead.org [ adjust context for renamed/removed variable names ] Signed-off-by: Lukas Beckmann Signed-off-by: Sasha Levin commit 22f9a5e226cf6d9cb32dbfc0cf596e6661e11a2d Author: Sasha Levin Date: Mon May 25 20:45:41 2026 -0400 Revert "x86/vdso: Fix output operand size of RDPID" This reverts commit d607e6b349b014df1d2d0399f6667322626450e0. Signed-off-by: Sasha Levin commit b8188ff3cfaa5621212b08473488cdbe41f86531 Author: Vladimir Yakovlev Date: Tue Mar 3 01:20:17 2026 +0300 spi: spi-dw-dma: fix print error log when wait finish transaction [ Upstream commit 3b46d61890632c8f8b117147b6923bff4b42ccb7 ] If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). Signed-off-by: Vladimir Yakovlev Link: https://patch.msgid.link/20260302222017.992228-2-vovchkir@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 630a15a31c2034b5b697f4aabc769b9d80d82446 Author: Xiang Mei Date: Fri Mar 27 23:30:00 2026 -0700 bridge: mrp: reject zero test interval to avoid OOM panic [ Upstream commit fa6e24963342de4370e3a3c9af41e38277b74cf3 ] br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes. Fixes: 20f6a05ef635 ("bridge: mrp: Rework the MRP netlink interface") Fixes: 7ab1748e4ce6 ("bridge: mrp: Extend MRP netlink interface for configuring MRP interconnect") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Acked-by: Nikolay Aleksandrov Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260328063000.1845376-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 709575a6ab20da63b2183ec4ac89a8e284ddbc1d Author: Sasha Levin Date: Sun May 24 10:36:48 2026 -0400 Revert "perf tool_pmu: Factor tool events into their own PMU" This reverts commit 7cfcd01f33fc3400c60f923d2896a8cdc60cecc4. Signed-off-by: Sasha Levin commit 94fc25a1f82aeaf7777478234ad38d90adb9d94f Author: Sasha Levin Date: Sun May 24 10:36:48 2026 -0400 Revert "perf python: Add parse_events function" This reverts commit 9cd264079fab9867dbc9fbc8a1e521996e3d7212. Signed-off-by: Sasha Levin commit 9fdca4c4d7eb942e83c81ef0e097303730ef72a6 Author: Sasha Levin Date: Sun May 24 10:36:48 2026 -0400 Revert "perf tool_pmu: Fix aggregation on duration_time" This reverts commit 310be445ab1028315627b326516f193511cb1c97. Signed-off-by: Sasha Levin commit 546fc0fe44797e07dfb17898e019e0b543628f53 Author: Sasha Levin Date: Sun May 24 10:29:50 2026 -0400 Revert "perf cgroup: Update metric leader in evlist__expand_cgroup" This reverts commit d26e31446c0fa96feca0b7701243b42447225d33. Signed-off-by: Sasha Levin commit 6345b24779718eb17e2950f5df622db42c6f84b6 Author: Pengpeng Hou Date: Thu May 21 10:28:29 2026 +0800 s390/debug: Reject zero-length input before trimming a newline [ Upstream commit c366a7b5ed7564e41345c380285bd3f6cb98971b ] debug_get_user_string() copies the userspace buffer into a newly allocated NUL-terminated buffer and then unconditionally looks at buffer[user_len - 1] to strip a trailing newline. A zero-length write reaches this helper unchanged, so the newline trim reads before the start of the allocated buffer. Reject empty writes before accessing the last input byte. Fixes: 66a464dbc8e0 ("[PATCH] s390: debug feature changes") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Reviewed-by: Benjamin Block Reviewed-by: Vasily Gorbik Tested-by: Vasily Gorbik Link: https://lore.kernel.org/r/20260417073530.96002-1-pengpeng@iscas.ac.cn Signed-off-by: Vasily Gorbik Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit cad210d2851f3a7d9573bdfc02aa61d9287bbe8c Author: Gustavo Sousa Date: Fri May 22 16:40:58 2026 -0300 drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status() commit 60a1e131a811b68703da58fd805ab359b704ab03 upstream. When media GT is disabled via configfs, there is no allocation for media_gt, which is kept as NULL. In such scenario, intel_hdcp_gsc_check_status() results in a kernel pagefault error due to >->uc.gsc being evaluated as an invalid memory address. Fix that by introducing a NULL check on media_gt and bailing out early if so. While at it, also drop the NULL check for gsc, since it can't be NULL if media_gt is not NULL. v2: - Get address for gsc only after checking that gt is not NULL. (Shuicheng) - Drop the NULL check for gsc. (Shuicheng) v3: - Add "Fixes" and "Cc: " tags. (Matt) Fixes: 4af50beb4e0f ("drm/xe: Use gsc_proxy_init_done to check proxy status") Cc: # v6.10+ Reviewed-by: Matt Roper Reviewed-by: Shuicheng Lin Link: https://patch.msgid.link/20260416-check-for-null-media_gt-in-intel_hdcp_gsc_check_status-v2-1-9adb9fd3b621@intel.com Signed-off-by: Gustavo Sousa (cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1) Signed-off-by: Matthew Brost Signed-off-by: Gustavo Sousa Signed-off-by: Sasha Levin commit c7f0f0d01c88bdcb8b1694d7d321670013f7ed7d Author: Namjae Jeon Date: Fri May 22 15:25:12 2026 +0800 ksmbd: validate owner of durable handle on reconnect [ Upstream commit 49110a8ce654bbe56bef7c5e44cce31f4b102b8a ] Currently, ksmbd does not verify if the user attempting to reconnect to a durable handle is the same user who originally opened the file. This allows any authenticated user to hijack an orphaned durable handle by predicting or brute-forcing the persistent ID. According to MS-SMB2, the server MUST verify that the SecurityContext of the reconnect request matches the SecurityContext associated with the existing open. Add a durable_owner structure to ksmbd_file to store the original opener's UID, GID, and account name. and catpure the owner information when a file handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner() to validate the identity of the requester during SMB2_CREATE (DHnC). Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Reported-by: Davide Ornaghi Reported-by: Navaneeth K Signed-off-by: Namjae Jeon Signed-off-by: Steve French [ Minor context conflict resolved. ] Signed-off-by: Alva Lan Signed-off-by: Sasha Levin commit 531c537b8fb620beabccfb1594e8d43cbebbb87a Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:08:50 2026 +0200 mptcp: pm: ADD_ADDR rtx: free sk if last commit b7b9a461569734d33d3259d58d2507adfac107ed upstream. When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself". Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-5-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ Applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c. Also, there were conflicts, because commit 30549eebc4d8 ("mptcp: make ADD_ADDR retransmission timeout adaptive") is not in this version and changed the context. Also, other conflicts were due to newer patches being backported with resolved conflicts before this one. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit b41dd76f3b9735096c21d3e799a2b9fe36498d57 Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:08:49 2026 +0200 mptcp: pm: ADD_ADDR rtx: always decrease sk refcount commit 9634cb35af17019baec21ca648516ce376fa10e6 upstream. When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(). It should then be released in all cases at the end. Some (unlikely) checks were returning directly instead of calling sock_put() to decrease the refcount. Jump to a new 'exit' label to call __sock_put() (which will become sock_put() in the next commit) to fix this potential leak. While at it, drop the '!msk' check which cannot happen because it is never reset, and explicitly mark the remaining one as "unlikely". Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-4-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit 967c4f2d597865a17ae7ccbd8881248386d13b2a Author: Matthieu Baerts (NGI0) Date: Thu May 21 05:08:48 2026 +0200 mptcp: pm: ADD_ADDR rtx: allow ID 0 commit 03f324f3f1f7619a47b9c91282cb12775ab0a2f1 upstream. ADD_ADDR can be sent for the ID 0, which corresponds to the local address and port linked to the initial subflow. Indeed, this address could be removed, and re-added later on, e.g. what is done in the "delete re-add signal" MPTCP Join selftests. So no reason to ignore it. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-2-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied to net/mptcp/pm_netlink.c instead of upstream's pm_kernel.c ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin commit d86bd4463b25d89c5953caa5544513fa0ebdfdc4 Author: Gang Yan Date: Thu May 21 05:08:47 2026 +0200 mptcp: sync the msk->sndbuf at accept() time commit fcf04b14334641f4b0b8647824480935e9416d52 upstream. On passive MPTCP connections, the msk sndbuf is not updated correctly. The root cause is an order issue in the accept path: - tcp_check_req() -> subflow_syn_recv_sock() -> mptcp_sk_clone_init() calls __mptcp_propagate_sndbuf() to copy the ssk sndbuf into msk - Later, tcp_child_process() -> tcp_init_transfer() -> tcp_sndbuf_expand() grows the ssk sndbuf. So __mptcp_propagate_sndbuf() runs before the ssk sndbuf has been expanded and the msk ends up with a much smaller sndbuf than the subflow: MPTCP: msk->sndbuf:20480, msk->first->sndbuf:2626560 Fix this by moving the __mptcp_propagate_sndbuf() call from mptcp_sk_clone_init() -- the ssk sndbuf is not yet finalized there -- to __mptcp_propagate_sndbuf() at accept() time, when the ssk sndbuf has been fully expanded by tcp_sndbuf_expand(). Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/602 Signed-off-by: Gang Yan Acked-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260420-net-mptcp-sync-sndbuf-accept-v1-1-e3523e3aeb44@kernel.org Signed-off-by: Paolo Abeni [ No conflicts, but move __mptcp_propagate_sndbuf() above the for-loop (mptcp_for_each_subflow()) present in this version, which will modify 'subflow' used by __mptcp_propagate_sndbuf() in this new patch. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Sasha Levin