commit a40f33ea3573bb57683ac39138ff64010dc25cb3 Author: Greg Kroah-Hartman Date: Thu May 14 15:29:29 2026 +0200 Linux 6.12.88 Link: https://lore.kernel.org/r/20260512173932.810559588@linuxfoundation.org Tested-by: Salvatore Bonaccorso Tested-by: Pavel Machek (CIP) Tested-by: Peter Schneider Tested-by: Dominique Martinet Tested-by: Brett A C Sheffield Tested-by: Francesco Dolcini Tested-by: Barry K. Nathan Tested-by: Mark Brown Tested-by: Shuah Khan Tested-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20260513153743.326058350@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Florian Fainelli Tested-by: Ron Economos Tested-by: Mark Brown Tested-by: Dominique Martinet Tested-by: Francesco Dolcini Tested-by: Miguel Ojeda Signed-off-by: Greg Kroah-Hartman commit 47c6e37a77b10e74f70d845ba4ea5d3cafa00336 Author: Shota Zaizen Date: Tue Apr 28 19:02:55 2026 +0900 ksmbd: validate inherited ACE SID length commit 996454bc0da84d5a1dedb1a7861823087e01a7ae upstream. smb_inherit_dacl() walks the parent directory DACL loaded from the security descriptor xattr. It verifies that each ACE contains the fixed SID header before using it, but does not verify that the variable-length SID described by sid.num_subauth is fully contained in the ACE. A malformed inheritable ACE can advertise more subauthorities than are present in the ACE. compare_sids() may then read past the ACE. smb_set_ace() also clamps the copied destination SID, but used the unchecked source SID count to compute the inherited ACE size. That could advance the temporary inherited ACE buffer pointer and nt_size accounting past the allocated buffer. Fix this by validating the parent ACE SID count and SID length before using the SID during inheritance. Compute the inherited ACE size from the copied SID so the size matches the bounded destination SID. Reject the inherited DACL if size accumulation would overflow smb_acl.size or the security descriptor allocation size. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Shota Zaizen Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 9109489cc8c34e50d15575a3d1ff82af586bc1aa Author: Prathyushi Nangia Date: Tue Dec 9 10:01:33 2025 -0600 x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache commit c21b90f77687075115d989e53a8ec5e2bb427ab1 upstream. Make sure resources are not improperly shared in the op cache and cause instruction corruption this way. Signed-off-by: Prathyushi Nangia Co-developed-by: Borislav Petkov (AMD) Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit d1e732b12324eeb3dbeb54c3b05e573d21d9c0bb Author: Marc Zyngier Date: Tue May 12 15:49:34 2026 +0100 KVM: arm64: Wake-up from WFI when iqrchip is in userspace commit 4ce98bf0865c349e7026ad9c14f48da264920953 upstream It appears that there is nothing in the wake-up path that evaluates whether the in-kernel interrupts are pending unless we have a vgic. This means that the userspace irqchip support has been broken for about four years, and nobody noticed. It was also broken before as we wouldn't wake-up on a PMU interrupt, but hey, who cares... It is probably time to remove the feature altogether, because it was a terrible idea 10 years ago, and it still is. Fixes: b57de4ffd7c6d ("KVM: arm64: Simplify kvm_cpu_has_pending_timer()") Link: https://patch.msgid.link/20260423163607.486345-1-maz@kernel.org Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 7bcadb3c2bc1cf60690e931aadd35fb7bd646a49 Author: David Carlier Date: Sun May 10 13:20:59 2026 -0400 tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() [ Upstream commit fad217e16fded7f3c09f8637b0f6a224d58b5f2e ] When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration. Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail") Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com Signed-off-by: David Carlier Signed-off-by: Steven Rostedt (Google) [ changed `tp->ext->unregfunc` to `tp->unregfunc` to match older struct layout ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 113c0650ce7d81608eca7b2a0e539208102d0622 Author: Quan Zhou Date: Sun May 10 13:20:48 2026 -0400 wifi: mt76: mt7925: fix incorrect TLV length in CLC command [ Upstream commit 62e037aa8cf5a69b7ea63336705a35c897b9db2b ] The previous implementation of __mt7925_mcu_set_clc() set the TLV length field (.len) incorrectly during CLC command construction. The length was initialized as sizeof(req) - 4, regardless of the actual segment length. This could cause the WiFi firmware to misinterpret the command payload, resulting in command execution errors. This patch moves the TLV length assignment to after the segment is selected, and sets .len to sizeof(req) + seg->len - 4, matching the actual command content. This ensures the firmware receives the correct TLV length and parses the command properly. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Cc: stable@vger.kernel.org Signed-off-by: Quan Zhou Acked-by: Sean Wang Link: https://patch.msgid.link/f56ae0e705774dfa8aab3b99e5bbdc92cd93523e.1772011204.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5c910f7708e3c507b037ca91ca5b09f8cfe71e65 Author: Sam Edwards Date: Sun May 10 10:22:47 2026 -0400 net: stmmac: Prevent NULL deref when RX memory exhausted [ Upstream commit 0bb05e6adfa99a2ea1fee1125cc0953409f83ed8 ] The CPU receives frames from the MAC through conventional DMA: the CPU allocates buffers for the MAC, then the MAC fills them and returns ownership to the CPU. For each hardware RX queue, the CPU and MAC coordinate through a shared ring array of DMA descriptors: one descriptor per DMA buffer. Each descriptor includes the buffer's physical address and a status flag ("OWN") indicating which side owns the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set the flag and the MAC is only allowed to clear it, and both must move through the ring in sequence: thus the ring is used for both "submissions" and "completions." In the stmmac driver, stmmac_rx() bookmarks its position in the ring with the `cur_rx` index. The main receive loop in that function checks for rx_descs[cur_rx].own=0, gives the corresponding buffer to the network stack (NULLing the pointer), and increments `cur_rx` modulo the ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its position with `dirty_rx`, allocates fresh buffers and rearms the descriptors (setting OWN=1). If it fails any allocation, it simply stops early (leaving OWN=0) and will retry where it left off when next called. This means descriptors have a three-stage lifecycle (terms my own): - `empty` (OWN=1, buffer valid) - `full` (OWN=0, buffer valid and populated) - `dirty` (OWN=0, buffer NULL) But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In the past (see 'Fixes:'), there was a bug where the loop could cycle `cur_rx` all the way back to the first descriptor it dirtied, resulting in a NULL dereference when mistaken for `full`. The aforementioned commit resolved that *specific* failure by capping the loop's iteration limit at `dma_rx_size - 1`, but this is only a partial fix: if the previous stmmac_rx_refill() didn't complete, then there are leftover `dirty` descriptors that the loop might encounter without needing to cycle fully around. The current code therefore panics (see 'Closes:') when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to catch up to `dirty_rx`. Fix this by explicitly checking, before advancing `cur_rx`, if the next entry is dirty; exit the loop if so. This prevents processing of the final, used descriptor until stmmac_rx_refill() succeeds, but fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix intended: so remove the clamp as well. Since stmmac_rx_zc() is a copy-paste-and-tweak of stmmac_rx() and the code structure is identical, any fix to stmmac_rx() will also need a corresponding fix for stmmac_rx_zc(). Therefore, apply the same check there. In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the MAC sets OWN=0 on the final descriptor, it will be unable to send any further DMA-complete IRQs until it's given more `empty` descriptors. Currently, the driver simply *hopes* that the next stmmac_rx_refill() succeeds, risking an indefinite stall of the receive process if not. But this is not a regression, so it can be addressed in a future change. Fixes: b6cb4541853c7 ("net: stmmac: avoid rx queue overrun") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221010 Cc: stable@vger.kernel.org Suggested-by: Russell King Signed-off-by: Sam Edwards Link: https://patch.msgid.link/20260422044503.5349-1-CFSworks@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 133160135a6d75b91c7a8a0938e0f4f84077bf17 Author: Russell King (Oracle) Date: Sun May 10 10:22:46 2026 -0400 net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY() [ Upstream commit 6b4286e0550814cdc4b897f881ec1fa8b0313227 ] STMMAC_GET_ENTRY() doesn't describe what this macro is doing - it is incrementing the provided index for the circular array of descriptors. Replace "GET" with "NEXT" as this better describes the action here. Signed-off-by: Russell King (Oracle) Link: https://patch.msgid.link/E1w2vba-0000000DbWo-1oL5@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski Stable-dep-of: 0bb05e6adfa9 ("net: stmmac: Prevent NULL deref when RX memory exhausted") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 846f4cedf0b97a11b4849278151547682af919fa Author: Russell King (Oracle) Date: Sun May 10 10:22:45 2026 -0400 net: stmmac: avoid shadowing global buf_sz [ Upstream commit 876cfb20e8892143c0c967b3657074f9131f9b5f ] stmmac_rx() declares a local variable named "buf_sz" but there is also a global variable for a module parameter which is called the same. To avoid confusion, rename the local variable. Signed-off-by: Russell King (Oracle) Reviewed-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/E1tpswi-005U6C-Py@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski Stable-dep-of: 0bb05e6adfa9 ("net: stmmac: Prevent NULL deref when RX memory exhausted") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 03f52a9c170431e8f10e156b9dc0dae80b3e9198 Author: Cássio Gabriel Date: Sat May 9 22:35:15 2026 -0400 ALSA: aloop: Fix peer runtime UAF during format-change stop [ Upstream commit e5c33cdc6f402eab8abd36ecf436b22c9d3a8aff ] loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit. Reported-by: syzbot+8fa95c41eafbc9d2ff6f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8fa95c41eafbc9d2ff6f Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback") Cc: stable@vger.kernel.org Suggested-by: Takashi Iwai Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260424-alsa-aloop-peer-stop-uaf-v2-1-94e68101db8a@gmail.com Signed-off-by: Takashi Iwai [ used scoped_guard(spinlock_irq) instead of guard(spinlock_irq) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c7e52fe3f7901ccb9cd29b3f7c683d809ba87e48 Author: Thorsten Blum Date: Sat May 9 22:34:42 2026 -0400 crypto: caam - guard HMAC key hex dumps in hash_digest_key [ Upstream commit 177730a273b18e195263ed953853273e901b5064 ] Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. Fixes: 045e36780f11 ("crypto: caam - ahash hmac support") Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2fbf190f23a0428d9ba567a50fba7bdd792bc97c Author: Thorsten Blum Date: Sat May 9 22:34:41 2026 -0400 printk: add print_hex_dump_devel() [ Upstream commit d134feeb5df33fbf77f482f52a366a44642dba09 ] Add print_hex_dump_devel() as the hex dump equivalent of pr_devel(), which emits output only when DEBUG is enabled, but keeps call sites compiled otherwise. Suggested-by: Herbert Xu Signed-off-by: Thorsten Blum Reviewed-by: John Ogness Signed-off-by: Herbert Xu Stable-dep-of: 177730a273b1 ("crypto: caam - guard HMAC key hex dumps in hash_digest_key") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0e550caa4bf575a06417de1e2b03a25f2caf88b6 Author: David Carlier Date: Sat May 9 10:21:55 2026 -0400 gtp: disable BH before calling udp_tunnel_xmit_skb() [ Upstream commit 5638504a2aa9e1b9d72af9060df1a160cce2d379 ] gtp_genl_send_echo_req() runs as a generic netlink doit handler in process context with BH not disabled. It calls udp_tunnel_xmit_skb(), which eventually invokes iptunnel_xmit() — that uses __this_cpu_inc/dec on softnet_data.xmit.recursion to track the tunnel xmit recursion level. Without local_bh_disable(), the task may migrate between dev_xmit_recursion_inc() and dev_xmit_recursion_dec(), breaking the per-CPU counter pairing. The result is stale or negative recursion levels that can later produce false-positive SKB_DROP_REASON_RECURSION_LIMIT drops on either CPU. The other udp_tunnel_xmit_skb() call sites in gtp.c are unaffected: the data path runs under ndo_start_xmit and the echo response handlers run from the UDP encap rx softirq, both with BH already disabled. Fix it by disabling BH around the udp_tunnel_xmit_skb() call, mirroring commit 2cd7e6971fc2 ("sctp: disable BH before calling udp_tunnel_xmit_skb()"). Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Link: https://patch.msgid.link/20260417055408.4667-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski [ Context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f1374fa6e57fd836623668d782ded9244cfd2938 Author: Junrui Luo Date: Fri May 8 23:31:59 2026 -0400 erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() [ Upstream commit 21e161de2dc660b1bb70ef5b156ab8e6e1cca3ab ] Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1 Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Reviewed-by: Gao Xiang Signed-off-by: Gao Xiang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 42aba246012fe91c69e4920961ed8ee35c1c5a94 Author: Gao Xiang Date: Fri May 8 23:31:58 2026 -0400 erofs: tidy up z_erofs_lz4_handle_overlap() [ Upstream commit 9ae77198d4815c63fc8ebacc659c71d150d1e51b ] - Add some useful comments to explain inplace I/Os and decompression; - Rearrange the code to get rid of one unnecessary goto. Reviewed-by: Chao Yu Signed-off-by: Gao Xiang Stable-dep-of: 21e161de2dc6 ("erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a625727993fcee886a8c1f502bda5e5a54ffc41c Author: Gao Xiang Date: Fri May 8 23:31:57 2026 -0400 erofs: move {in,out}pages into struct z_erofs_decompress_req [ Upstream commit 0243cc257ffa6d8cb210a3070b687fb510f113c7 ] It seems that all compressors need those two values, so just move them into the common structure. `struct z_erofs_lz4_decompress_ctx` can be dropped too. Reviewed-by: Chao Yu Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20250305124007.1810731-1-hsiangkao@linux.alibaba.com Stable-dep-of: 21e161de2dc6 ("erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 910bb34b801d39794e656f7d48414844b2bd354e Author: Thorsten Blum Date: Fri May 8 23:16:39 2026 -0400 crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx [ Upstream commit adb3faf2db1a66d0f015b44ac909a32dfc7f2f9c ] The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead. Fixes: ed70b479c2c0 ("crypto: nx - add hardware 842 crypto comp alg") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 041acda6d9f96006703466449c10c9a69590c8b9 Author: Zilin Guan Date: Fri May 8 20:40:35 2026 -0400 hfsplus: fix held lock freed on hfsplus_fill_super() [ Upstream commit 90c500e4fd83fa33c09bc7ee23b6d9cc487ac733 ] hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We confirmed the bug by runtime testing under QEMU with x86_64 defconfig, lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we used GDB to dynamically shrink the max_unistr_len parameter to 1 before hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and exercises the faulty error path. The following warning was observed during mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b:00007fff1ab55718 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffacad55eae RDX: 000055740c64e5b0 RSI: 000055740c64e630 RDI: 000055740c651ab0 RBP: 000055740c64e380 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000055740c64e5b0 R14: 000055740c651ab0 R15: 000055740c64e380 After applying this patch, the warning no longer appears. Fixes: 89ac9b4d3d1a ("hfsplus: fix longname handling") CC: stable@vger.kernel.org Signed-off-by: Zilin Guan Reviewed-by: Viacheslav Dubeyko Tested-by: Viacheslav Dubeyko Signed-off-by: Viacheslav Dubeyko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c91bbd6193c70a02c50c22e0fb1f60c3c5bd053a Author: Deepanshu Kartikey Date: Fri May 8 20:40:34 2026 -0400 hfsplus: fix uninit-value by validating catalog record size [ Upstream commit b6b592275aeff184aa82fcf6abccd833fb71b393 ] Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering the KMSAN warning when the uninitialized bytes are used as array indices in case_fold(). Fix by introducing hfsplus_brec_read_cat() wrapper that: 1. Calls hfs_brec_read() to read the data 2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length) 3. Returns -EIO if size doesn't match expected For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading nodeName.length to avoid reading uninitialized data at call sites that don't zero-initialize the entry structure. Also initialize the tmp variable in hfsplus_find_cat() as defensive programming to ensure no uninitialized data even if validation is bypassed. Reported-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d80abb5b890d39261e72 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com Reviewed-by: Viacheslav Dubeyko Tested-by: Viacheslav Dubeyko Suggested-by: Charalampos Mitrodimas Link: https://lore.kernel.org/all/20260120051114.1281285-1-kartikey406@gmail.com/ [v1] Link: https://lore.kernel.org/all/20260121063109.1830263-1-kartikey406@gmail.com/ [v2] Link: https://lore.kernel.org/all/20260212014233.2422046-1-kartikey406@gmail.com/ [v3] Link: https://lore.kernel.org/all/20260214002100.436125-1-kartikey406@gmail.com/T/ [v4] Link: https://lore.kernel.org/all/20260221061626.15853-1-kartikey406@gmail.com/T/ [v5] Signed-off-by: Deepanshu Kartikey Signed-off-by: Viacheslav Dubeyko Link: https://lore.kernel.org/r/20260307010302.41547-1-kartikey406@gmail.com Signed-off-by: Viacheslav Dubeyko Stable-dep-of: 90c500e4fd83 ("hfsplus: fix held lock freed on hfsplus_fill_super()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e40887a3c86829796f27bb35df5be6ce96f62e68 Author: Miquel Raynal Date: Fri May 8 15:52:17 2026 -0400 mtd: spinand: winbond: Declare the QE bit on W25NxxJW [ Upstream commit 7866ce992cf0d3c3b50fe8bf4acb1dbb173a2304 ] Factory default for this bit is "set" (at least on the chips I have), but we must make sure it is actually set by Linux explicitly, as the bit is writable by an earlier stage. Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal [ adapted chip name W25N02JW to W25N02JWZEIF and applied flag change via read_cache_variants context instead of read_cache_dual_quad_dtr_variants ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b5597bb83fc37b5b5da74a4453fa920b932cf39a Author: Seohyeon Maeng Date: Fri May 8 15:52:20 2026 -0400 udf: fix partition descriptor append bookkeeping [ Upstream commit 08841b06fa64d8edbd1a21ca6e613420c90cc4b8 ] Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model. Fixes: ee4af50ca94f ("udf: Fix mounting of Win7 created UDF filesystems") Cc: stable@vger.kernel.org Signed-off-by: Seohyeon Maeng Link: https://patch.msgid.link/20260310081652.21220-1-bioloidgp@gmail.com Signed-off-by: Jan Kara [ replaced kzalloc_objs() helper with equivalent kcalloc() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 81472f8e87f81846b7e5e9b2e1bce011a9d48cf3 Author: Luke Wang Date: Fri May 8 09:22:34 2026 -0400 mmc: core: Optimize time for secure erase/trim for some Kingston eMMCs [ Upstream commit d6bf2e64dec87322f2b11565ddb59c0e967f96e3 ] Kingston eMMC IY2964 and IB2932 takes a fixed ~2 seconds for each secure erase/trim operation regardless of size - that is, a single secure erase/trim operation of 1MB takes the same time as 1GB. With default calculated 3.5MB max discard size, secure erase 1GB requires ~300 separate operations taking ~10 minutes total. Add a card quirk, MMC_QUIRK_FIXED_SECURE_ERASE_TRIM_TIME, to set maximum secure erase size for those devices. This allows 1GB secure erase to complete in a single operation, reducing time from 10 minutes to just 2 seconds. Signed-off-by: Luke Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson [ adapted to use mmc_can_secure_erase_trim()/mmc_can_trim() and placed helper after mmc_card_no_uhs_ddr50_tuning() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 60246cdd4c515ea7d920cddf48932efcb990773e Author: David Carlier Date: Tue May 5 05:54:50 2026 -0400 octeon_ep_vf: add NULL check for napi_build_skb() [ Upstream commit dd66b42854705e4e4ee7f14d260f86c578bed3e3 ] napi_build_skb() can return NULL on allocation failure. In __octep_vf_oq_process_rx(), the result is used directly without a NULL check in both the single-buffer and multi-fragment paths, leading to a NULL pointer dereference. Add NULL checks after both napi_build_skb() calls, properly advancing descriptors and consuming remaining fragments on failure. Fixes: 1cd3b407977c ("octeon_ep_vf: add Tx/Rx processing and interrupt support") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Link: https://patch.msgid.link/20260409184009.930359-3-devnexen@gmail.com Signed-off-by: Jakub Kicinski [ inlined missing octep_vf_oq_next_idx() helper as read_idx++ with wraparound ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 270e5c576a6e30f6b337fa91d35b44c241297533 Author: Thomas Weißschuh Date: Tue May 5 01:59:21 2026 -0400 hwmon: (powerz) Avoid cacheline sharing for DMA buffer [ Upstream commit 3023c050af3600bf451153335dea5e073c9a3088 ] Depending on the architecture the transfer buffer may share a cacheline with the following mutex. As the buffer may be used for DMA, that is problematic. Use the high-level DMA helpers to make sure that cacheline sharing can not happen. Also drop the comment, as the helpers are documentation enough. https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org Fixes: 4381a36abdf1c ("hwmon: add POWER-Z driver") Cc: stable@vger.kernel.org # ca085faabb42: dma-mapping: add __dma_from_device_group_begin()/end() Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20260408-powerz-cacheline-alias-v1-1-1254891be0dd@weissschuh.net Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ef3fb92a7b44f1a4838da76d7931dadd509e1d2f Author: Michael S. Tsirkin Date: Tue May 5 01:59:20 2026 -0400 dma-mapping: add __dma_from_device_group_begin()/end() [ Upstream commit ca085faabb42c31ee204235facc5a430cb9e78a9 ] When a structure contains a buffer that DMA writes to alongside fields that the CPU writes to, cache line sharing between the DMA buffer and CPU-written fields can cause data corruption on non-cache-coherent platforms. Add __dma_from_device_group_begin()/end() annotations to ensure proper alignment to prevent this: struct my_device { spinlock_t lock1; __dma_from_device_group_begin(); char dma_buffer1[16]; char dma_buffer2[16]; __dma_from_device_group_end(); spinlock_t lock2; }; Message-ID: <19163086d5e4704c316f18f6da06bc1c72968904.1767601130.git.mst@redhat.com> Acked-by: Marek Szyprowski Reviewed-by: Petr Tesarik Signed-off-by: Michael S. Tsirkin Stable-dep-of: 3023c050af36 ("hwmon: (powerz) Avoid cacheline sharing for DMA buffer") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5faf0173fb392c319d0ddf26eb8cdfc0491d7a72 Author: Christoph Hellwig Date: Tue May 5 01:59:19 2026 -0400 dma-mapping: drop unneeded includes from dma-mapping.h [ Upstream commit be164349e173a8e71cd76f17c7ed720813b8d69b ] Back in the day a lot of logic was implemented inline in dma-mapping.h and needed various includes. Move of this has long been moved out of line, so we can drop various includes to improve kernel rebuild times. Signed-off-by: Christoph Hellwig Stable-dep-of: 3023c050af36 ("hwmon: (powerz) Avoid cacheline sharing for DMA buffer") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e153365a800c834f62ccc5f3c0538bea00797d9d Author: Amir Goldstein Date: Mon May 4 20:16:14 2026 -0400 fs: prepare for adding LSM blob to backing_file [ Upstream commit 880bd496ec72a6dcb00cb70c430ef752ba242ae7 ] In preparation to adding LSM blob to backing_file struct, factor out helpers init_backing_file() and backing_file_free(). Cc: stable@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: linux-unionfs@vger.kernel.org Cc: linux-erofs@lists.ozlabs.org Signed-off-by: Amir Goldstein Reviewed-by: Serge Hallyn [PM: use the term "LSM blob", fix comment style to match file] Signed-off-by: Paul Moore [ Used kfree() instead of kmem_cache_free(bfilp_cachep, ff) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2b53d3a52e8e5403a4f4fb57ac6cad3fd2cb1066 Author: Thomas Zimmermann Date: Mon May 4 20:14:53 2026 -0400 fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info [ Upstream commit 9ded47ad003f09a94b6a710b5c47f4aa5ceb7429 ] Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. Signed-off-by: Thomas Zimmermann Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support") Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v2.6.22+ Signed-off-by: Helge Deller [ replaced `kzalloc_obj()` with `kzalloc(sizeof(*fbdefio_state), GFP_KERNEL)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 723b9fa930cc277c15ce6b9ec9feec828cfac9d7 Author: Alexei Starovoitov Date: Mon Apr 13 12:42:45 2026 -0700 bpf: Fix use-after-free in arena_vm_close on fork commit 4fddde2a732de60bb97e3307d4eb69ac5f1d2b74 upstream. arena_vm_open() only bumps vml->mmap_count but never registers the child VMA in arena->vma_list. The vml->vma always points at the parent VMA, so after parent munmap the pointer dangles. If the child then calls bpf_arena_free_pages(), zap_pages() reads the stale vml->vma triggering use-after-free. Fix this by preventing the arena VMA from being inherited across fork with VM_DONTCOPY, and preventing VMA splits via the may_split callback. Also reject mremap with a .mremap callback returning -EINVAL. A same-size mremap(MREMAP_FIXED) on the full arena VMA reaches copy_vma() through the following path: check_prep_vma() - returns 0 early: new_len == old_len skips VM_DONTEXPAND check prep_move_vma() - vm_start == old_addr and vm_end == old_addr + old_len so may_split is never called move_vma() copy_vma_and_data() copy_vma() vm_area_dup() - copies vm_private_data (vml pointer) vm_ops->open() - bumps vml->mmap_count vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA The refcount ensures the rollback's arena_vm_close does not free the vml shared with the original VMA. Reported-by: Weiming Shi Reported-by: Xiang Mei Fixes: 317460317a02 ("bpf: Introduce bpf_arena.") Reviewed-by: Emil Tsalapatis Link: https://lore.kernel.org/r/20260413194245.21449-1-alexei.starovoitov@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 4669a366482c389e99e37d8de132947333ffd5b7 Author: Huacai Chen Date: Mon May 4 09:00:20 2026 +0800 LoongArch: Use per-root-bridge PCIH flag to skip mem resource fixup commit 49f33840dcc907d21313d369e34872880846b61c upstream. When firmware enables 64-bit PCI host bridge support, some root bridges already provide valid 64-bit mem resource windows through ACPI. In this case, the LoongArch-specific mem resource high-bits fixup in acpi_prepare_root_resources() should not be applied unconditionally. Otherwise, the kernel may override the native resource layout derived from firmware, and later BAR assignment can fail to place device BARs into the intended 64-bit address space correctly. Add a per-root-bridge ACPI flag, PCIH, and evaluate it from the current root bridge device scope. When PCIH is set, skip the mem resource high- bits fixup path and let the kernel use the firmware-provided resource description directly. When PCIH is absent or cleared, keep the existing behavior and continue filling the high address bits from the host bridge address. This makes the behavior per-root-bridge configurable and avoids breaking valid 64-bit BAR space allocation on bridges whose 64-bit windows have already been fully described by firmware. Cc: stable@vger.kernel.org Suggested-by: Chao Li Tested-by: Dongyan Qian Signed-off-by: Dongyan Qian Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 943194ee1a3c1397c6f8cd9c2df13c92e7454ef2 Author: Tao Cui Date: Mon May 4 09:00:38 2026 +0800 LoongArch: KVM: Use kvm_set_pte() in kvm_flush_pte() commit 81e18777d61440511451866c7c80b34a8bdd6b33 upstream. kvm_flush_pte() is the only caller that directly assigns *pte instead of using the kvm_set_pte() wrapper. Use the wrapper for consistency with the rest of the file. No functional change intended. Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao Signed-off-by: Tao Cui Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 708d5854801ac820780968c7d548db1b76a478c2 Author: Bibo Mao Date: Mon May 4 09:00:48 2026 +0800 LoongArch: KVM: Move unconditional delay into timer clear scenery commit 5a873d77ba792410a796595a917be6a440f9b7d2 upstream. When timer interrupt arrives in guest kernel, guest kernel clears the timer interrupt and program timer with the next incoming event. During this stage, timer tick is -1 and timer interrupt status is disabled in ESTAT register. KVM hypervisor need write zero with timer tick register and wait timer interrupt injection from HW side, and then clear timer interrupt. So there is 2 cycle delay in KVM hypervisor to emulate such scenery, and the delay is unnecessary if there is no need to clear the timer interrupt. Here move 2 cycle delay into timer clear scenery and add timer ESTAT checking after delay, and set max timer expire value if timer interrupt does not arrive still. Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 4c448046a4c80c9aff88ff23d5bf674b28a5bd1d Author: Bibo Mao Date: Mon May 4 09:00:48 2026 +0800 LoongArch: KVM: Fix HW timer interrupt lost when inject interrupt by software commit 2433f3f5724b3af569d9fb411ba728629524738b upstream. With passthrough HW timer, timer interrupt is injected by HW. When inject emulated CPU interrupt by software such SIP0/SIP1/IPI, HW timer interrupt may be lost. Here check whether there is timer tick value inversion before and after injecting emulated CPU interrupt by software, timer enabling by reading timer cfg register is skipped. If the timer tick value is detected with changing, then timer should be enabled. And inject a timer interrupt by software if there is. Cc: Fixes: f45ad5b8aa93 ("LoongArch: KVM: Implement vcpu interrupt operations"). Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 3c6abcefb227c530477c64a811728b8365ce1d0f Author: Xianglai Li Date: Mon May 4 09:00:37 2026 +0800 LoongArch: KVM: Fix "unreliable stack" for kvm_exc_entry commit b323a441da602dfdfc24f30d3190cac786ffebf2 upstream. Insert the appropriate UNWIND hint into the kvm_exc_entry assembly function to guide the generation of correct ORC table entries, thereby solving the timeout problem ("unreliable stack") while loading the livepatch-sample module on a physical machine running virtual machines with multiple vcpus. Cc: stable@vger.kernel.org Signed-off-by: Xianglai Li Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 0d2e79cc99316801a93cfeea2c6dc4aa05e6c5d9 Author: Qiang Ma Date: Mon May 4 09:00:37 2026 +0800 LoongArch: KVM: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS commit b3e31a6650d4cab63f0814c37c0b360372c6ee9e upstream. It doesn't make sense to return the recommended maximum number of vCPUs which exceeds the maximum possible number of vCPUs. Other architectures have already done this, such as commit 57a2e13ebdda ("KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS") Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao Signed-off-by: Qiang Ma Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 2cb19b06c09983727573bbe7d7430cbad480a714 Author: Wentao Guan Date: Mon May 4 09:00:20 2026 +0800 LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang() commit 8dfa2f8780e486d05b9a0ffce70b8f5fbd62053e upstream. The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and readl(crtc_reg) will access with random address, because the "device" is from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong when my platform inserts a discrete GPU: lspci -tv -[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller ... +-06.0 Loongson Technology LLC LG100 GPU +-06.2 Loongson Technology LLC Device 7a37 ... Add a default switch case to fix the panic as below: Kernel ade access[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4 pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0 a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002 a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001 t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000 t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0 t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8 s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000 s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000 ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210 ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1) BADV: 7fffffffffffff00 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007 0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff 900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08 0000000000000000 0000000000000000 0000000000000006 90000001002fb778 90000001000530b8 90000000027af000 0000000000000000 9000000100054000 9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001 90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000 0000000000000006 90000000027af000 0000000000000030 90000000027af000 900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560 7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030 ... Call Trace: [<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210 [<9000000000eebc08>] pci_fixup_device+0x108/0x280 [<9000000000ebb70c>] pci_setup_device+0x24c/0x690 [<9000000000ebc560>] pci_scan_single_device+0xe0/0x140 [<9000000000ebc684>] pci_scan_slot+0xc4/0x280 [<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0 [<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420 [<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440 [<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0 [<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<9000000000f5211c>] acpi_bus_scan+0x6c/0x280 [<900000000189c028>] acpi_scan_init+0x194/0x310 [<900000000189bc6c>] acpi_init+0xcc/0x140 [<9000000000220cdc>] do_one_initcall+0x4c/0x310 [<90000000018618fc>] kernel_init_freeable+0x258/0x2d4 [<900000000184326c>] kernel_init+0x28/0x13c [<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 Cc: stable@vger.kernel.org Fixes: 95db0c9f526d ("LoongArch: Workaround LS2K/LS7A GPU DMA hang bug") Link: https://gist.github.com/opsiff/ebf2dac51b4013d22462f2124c55f807 Link: https://gist.github.com/opsiff/a62f2a73db0492b3c49bf223a339b133 Signed-off-by: Wentao Guan Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 24a55e5eeebcd985e88a627b127db5961691e7c3 Author: Quentin Perret Date: Fri Apr 24 09:49:08 2026 +0100 KVM: arm64: Fix initialisation order in __pkvm_init_finalise() commit 5bb0aed57ba944f8c201e4e82ec066e0187e0f85 upstream. fix_host_ownership() walks the hypervisor's stage-1 page-table to adjust the host's stage-2 accordingly. Any such adjustment that requires cache maintenance operations depends on the per-CPU hyp fixmap being present. However, fix_host_ownership() is currently called before fix_hyp_pgtable_refcnt() and hyp_create_fixmap(), so the fixmap does not yet exist when it runs. This is benign today because the host stage-2 starts empty and no CMOs are needed, but it becomes a latent crash as soon as fix_host_ownership() is extended to operate on a non-empty page-table. Reorder the calls so that fix_hyp_pgtable_refcnt() and hyp_create_fixmap() complete before fix_host_ownership() is invoked. Fixes: 0d16d12eb26e ("KVM: arm64: Fix-up hyp stage-1 refcounts for all pages mapped at EL2") Signed-off-by: Quentin Perret Signed-off-by: Fuad Tabba Link: https://patch.msgid.link/20260424084908.370776-7-tabba@google.com Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 7b9926403a8e50e305b4c1c7ab233d9d588a34b7 Author: David Woodhouse Date: Tue Apr 7 21:27:02 2026 +0100 KVM: arm64: vgic: Fix IIDR revision field extracted from wrong value commit a0e6ae45af17e8b27958830595799c702ffbab8d upstream. The uaccess write handlers for GICD_IIDR in both GICv2 and GICv3 extract the revision field from 'reg' (the current IIDR value read back from the emulated distributor) instead of 'val' (the value userspace is trying to write). This means userspace can never actually change the implementation revision — the extracted value is always the current one. Fix the FIELD_GET to use 'val' so that userspace can select a different revision for migration compatibility. Fixes: 49a1a2c70a7f ("KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision") Signed-off-by: David Woodhouse Link: https://patch.msgid.link/20260407210949.2076251-2-dwmw2@infradead.org Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 745b49c493e43ac939023a94481127c008da18ff Author: Guangshuo Li Date: Fri Apr 10 20:47:26 2026 +0800 f2fs: fix uninitialized kobject put in f2fs_init_sysfs() commit b635f2ecdb5ad34f9c967cabb704d6bed9382fd0 upstream. In f2fs_init_sysfs(), all failure paths after kset_register() jump to put_kobject, which unconditionally releases both f2fs_tune and f2fs_feat. If kobject_init_and_add(&f2fs_feat, ...) fails, f2fs_tune has not been initialized yet, so calling kobject_put(&f2fs_tune) is invalid. Fix this by splitting the unwind path so each error path only releases objects that were successfully initialized. Fixes: a907f3a68ee26ba4 ("f2fs: add a sysfs entry to reclaim POSIX_FADV_NOREUSE pages") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit ab1eaf9d5c99042f5b0243bf67a06283a4c0757f Author: Yongpeng Yang Date: Fri Apr 3 22:40:17 2026 +0800 f2fs: fix node_cnt race between extent node destroy and writeback commit ed78aeebef05212ef7dca93bd931e4eff67c113f upstream. f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing extent nodes. When called from f2fs_drop_inode() with I_SYNC set, concurrent kworker writeback can insert new extent nodes into the same extent tree, racing with the destroy and triggering f2fs_bug_on() in __destroy_extent_node(). The scenario is as follows: drop inode writeback - iput - f2fs_drop_inode // I_SYNC set - f2fs_destroy_extent_node - __destroy_extent_node - while (node_cnt) { write_lock(&et->lock) __free_extent_tree write_unlock(&et->lock) - __writeback_single_inode - f2fs_outplace_write_data - f2fs_update_read_extent_cache - __update_extent_tree_range // FI_NO_EXTENT not set, // insert new extent node } // node_cnt == 0, exit while - f2fs_bug_on(node_cnt) // node_cnt > 0 Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected. This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(), consistent with other callers (__update_extent_tree_range and __drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and EX_BLOCK_AGE tree. Fixes: 3fc5d5a182f6 ("f2fs: fix to shrink read extent node in batches") Cc: stable@vger.kernel.org Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit f5c604ef03e728e71380799c574afba06b1a6272 Author: Yongpeng Yang Date: Mon Mar 23 20:06:22 2026 +0800 f2fs: fix incorrect multidevice info in trace_f2fs_map_blocks() commit eb2ca3ca983551a80e16a4a25df5a4ce59df8484 upstream. When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent cache, map->m_multidev_dio is not updated, which leads to incorrect multidevice information being reported by trace_f2fs_map_blocks(). This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when the read extent cache is hit. Cc: stable@kernel.org Fixes: 0094e98bd147 ("f2fs: factor a f2fs_map_blocks_cached helper") Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 75c1800246310853041c7c78d42c363d6e323767 Author: Yongpeng Yang Date: Mon Mar 23 20:06:24 2026 +0800 f2fs: fix fiemap boundary handling when read extent cache is incomplete commit 95e159ad3e52f7478cfd22e44ec37c9f334f8993 upstream. f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a file, and then merges contiguous mappings into extents. If the mapping is found in the read extent cache, node blocks do not need to be read. However, in the following scenario, a contiguous extent can be split into two extents: $ dd if=/dev/zero of=data.128M bs=1M count=128 $ losetup -f data.128M $ mkfs.f2fs /dev/loop0 -f $ mount -o mode=lfs /dev/loop0 /mnt/f2fs/ $ cd /mnt/f2fs/ $ dd if=/dev/zero of=data.72M bs=1M count=72 && sync $ dd if=/dev/zero of=data.4M bs=1M count=4 && sync $ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync $ echo 3 > /proc/sys/vm/drop_caches $ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync $ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync $ f2fs_io fiemap 0 1024 data.4M Fiemap: offset = 0 len = 1024 logical addr. physical addr. length flags 0 0000000000000000 0000000006400000 0000000000200000 00001000 1 0000000000200000 0000000006600000 0000000000200000 00001001 Although the physical addresses of the ranges 0～2MB and 2M～4MB are contiguous, the mapping for the 2M～4MB range is not present in memory. When the physical addresses for the 0～2MB range are updated, no merge happens because the adjacent mapping is missing from the in-memory cache. As a result, fiemap reports two separate extents instead of a single contiguous one. The root cause is that the read extent cache does not guarantee that all blocks of an extent are present in memory. Therefore, when the extent length returned by f2fs_map_blocks_cached() is smaller than maxblocks, the remaining mappings are retrieved via f2fs_get_dnode_of_data() to ensure correct fiemap extent boundary handling. Cc: stable@kernel.org Fixes: cd8fc5226bef ("f2fs: remove the create argument to f2fs_map_blocks") Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit 58ab0d1a891e8221e36bfbbf914f28ef3ca39eca Author: Cen Zhang Date: Wed Mar 18 15:32:53 2026 +0800 f2fs: add READ_ONCE() for i_blocks in f2fs_update_inode() commit 5471834a96fb697874be2ca0b052e74bcf3c23d1 upstream. f2fs_update_inode() reads inode->i_blocks without holding i_lock to serialize it to the on-disk inode, while concurrent truncate or allocation paths may modify i_blocks under i_lock. Since blkcnt_t is u64, this risks torn reads on 32-bit architectures. Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent potential compiler-induced tearing. Fixes: 19f99cee206c ("f2fs: add core inode operations") Cc: stable@vger.kernel.org Signed-off-by: Cen Zhang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit b157dab93a7af44a84e78cf0cb311dde475cff5b Author: Gang Yan Date: Mon Apr 27 21:54:34 2026 +0200 mptcp: fix scheduling with atomic in timestamp sockopt commit b5c52908d52c6c8eb8933264aa6087a0600fd892 upstream. Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows") Cc: stable@vger.kernel.org Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260420093343.16443-1-gang.yan@linux.dev Signed-off-by: Gang Yan Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-2-7432b7f279fa@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1a7a84567b7d9c35263cccb9edb4fb618176d7bb Author: Gang Yan Date: Mon Apr 27 21:54:33 2026 +0200 mptcp: sockopt: set timestamp flags on subflow socket, not msk commit 5f95c21fc23a7ef22b4d27d1ed9bb55557ffb926 upstream. Both mptcp_setsockopt_sol_socket_tstamp() and mptcp_setsockopt_sol_socket_timestamping() iterate over subflows, acquire the subflow socket lock, but then erroneously pass the MPTCP msk socket to sock_set_timestamp() / sock_set_timestamping() instead of the subflow ssk. As a result, the timestamp flags are set on the wrong socket and have no effect on the actual subflows. Pass ssk instead of sk to both helpers. Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows") Cc: stable@vger.kernel.org Signed-off-by: Gang Yan Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-1-7432b7f279fa@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 111fa20e43041474fc2b604211b74f8a80de81d7 Author: Shardul Bankar Date: Fri May 1 21:35:35 2026 +0200 mptcp: use MPTCP_RST_EMPTCP for ACK HMAC validation failure commit a6da02d4c00fdda2417e42ad2b762a9209e6cc49 upstream. When HMAC validation fails on a received ACK + MP_JOIN in subflow_syn_recv_sock(), the subflow is reset with reason MPTCP_RST_EPROHIBIT ("Administratively prohibited"). This is incorrect: HMAC validation failure is an MPTCP protocol-level error, not an administrative policy denial. The mirror site on the client, in subflow_finish_connect(), already uses MPTCP_RST_EMPTCP ("MPTCP-specific error") for the same kind of HMAC failure on the SYN/ACK + MP_JOIN. Use the same reason on the server side for symmetry and accuracy. Suggested-by: Matthieu Baerts (NGI0) Fixes: 443041deb5ef ("mptcp: fix NULL pointer in can_accept_new_subflow") Cc: stable@vger.kernel.org Signed-off-by: Shardul Bankar Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-2-b70118df778e@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7dde976212ad0b68f4841b4f811f5e92fb8ecf47 Author: Shardul Bankar Date: Fri May 1 21:35:34 2026 +0200 mptcp: use MPJoinSynAckHMacFailure for SynAck HMAC failure commit c4a99a921949cddc590b22bb14eeb23dffcc3ba6 upstream. In subflow_finish_connect(), HMAC validation of the server's HMAC in SYN/ACK + MP_JOIN increments MPTCP_MIB_JOINACKMAC ("HMAC was wrong on ACK + MP_JOIN") on failure. The function processes the SYN/ACK, not the ACK; the matching MPTCP_MIB_JOINSYNACKMAC counter ("HMAC was wrong on SYN/ACK + MP_JOIN") exists but is not incremented anywhere in the tree. The mirror site on the server, subflow_syn_recv_sock(), already uses JOINACKMAC correctly for ACK HMAC failure. Use JOINSYNACKMAC at the SYN/ACK validation site so each counter reflects the packet whose HMAC actually failed. Suggested-by: Matthieu Baerts (NGI0) Fixes: fc518953bc9c ("mptcp: add and use MIB counter infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Shardul Bankar Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-1-b70118df778e@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 1d259bc7cc87494b7e757c373e955494de605d06 Author: Matthieu Baerts (NGI0) Date: Mon Apr 27 21:54:35 2026 +0200 mptcp: fastclose msk when linger time is 0 commit f14d6e9c3678a067f304abba561e0c5446c7e845 upstream. The SO_LINGER socket option has been supported for a while with MPTCP sockets [1], but it didn't cause the equivalent of a TCP reset as expected when enabled and its time was set to 0. This was causing some behavioural differences with TCP where some connections were not promptly stopped as expected. To fix that, an extra condition is checked at close() time before sending an MP_FASTCLOSE, the MPTCP equivalent of a TCP reset. Note that backporting up to [1] will be difficult as more changes are needed to be able to send MP_FASTCLOSE. It seems better to stop at [2], which was supposed to already imitate TCP. Validated with MPTCP packetdrill tests [3]. Fixes: 268b12387460 ("mptcp: setsockopt: support SO_LINGER") [1] Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") [2] Cc: stable@vger.kernel.org Reported-by: Lance Tuller Closes: https://github.com/lance0/xfr/pull/67 Link: https://github.com/multipath-tcp/packetdrill/pull/196 [3] Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-3-7432b7f279fa@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3ec544f569c827c2c778669fba2804dfbb6e2243 Author: Matthieu Baerts (NGI0) Date: Tue May 5 17:00:59 2026 +0200 selftests: mptcp: pm: restrict 'unknown' check to pm_nl_ctl commit 53705ddfa18408f8e1f064331b6387509fa19f7f upstream. When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of 'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only been added to 'pm_nl_ctl' for this specific check: to ensure that the kernel ignores such unsupported flag. No reason to add this flag to 'ip mptcp'. Then, this check should be skipped when 'ip mptcp' is used. Fixes: 0cef6fcac24d ("selftests: mptcp: ip_mptcp option for more scripts") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 9d5173ea38b89741236586f136802bf3ab2f4c7c Author: Matthieu Baerts (NGI0) Date: Tue May 5 17:00:58 2026 +0200 selftests: mptcp: check output: catch cmd errors commit 65db7b27b90e2ea8d4966935aa9a50b6a60c31ac upstream. Using '${?}' inside the if-statement to check the returned value from the command that was evaluated as part of the if-statement is not correct: here, '${?}' will be linked to the previous instruction, not the one that is expected here (${cmd}). Instead, simply mark the error, except if an error is expected. If that's the case, 1 can be passed as the 4th argument of this helper. Three checks from pm_netlink.sh expect an error. While at it, improve the error message when the command unexpectedly fails or succeeds. Note that we could expect a specific returned value, but the checks currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl', and these two tools don't return the same error code. Fixes: 2d0c1d27ea4e ("selftests: mptcp: add mptcp_lib_check_output helper") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 45d25e3ec17900bf5a9d6876ff16ceee31c4c0e0 Author: Jason Gunthorpe Date: Tue Apr 28 13:17:43 2026 -0300 RDMA/vmw_pvrdma: Fix double free on pvrdma_alloc_ucontext() error path commit e38e86995df27f1f854063dab1f0c6a513db3faf upstream. Sashiko points out that pvrdma_uar_free() is already called within pvrdma_dealloc_ucontext(), so calling it before triggers a double free. Cc: stable@vger.kernel.org Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4 Link: https://patch.msgid.link/r/10-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit f8ee926431a7bbec2b10c1290664af2cb290b983 Author: Michael Bommarito Date: Tue Apr 14 07:15:55 2026 -0400 RDMA/rxe: Reject unknown opcodes before ICRC processing commit 4c6f86d85d03cdb33addce86aa69aa795ca6c47a upstream. Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv"), a single unauthenticated UDP packet can still trigger panic. That patch handled payload_size() underflow only for valid opcodes with short packets, not for packets carrying an unknown opcode. The unknown-opcode OOB read described below predates that commit and reaches back to the initial Soft RoCE driver. The check added there reads pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The rxe_opcode[] array has 256 entries but is only populated for defined IB opcodes; any other entry (for example opcode 0xff) is zero-initialized, so length == 0 and the check degenerates to pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES which underflows when length == 0 and passes a huge value to rxe_crc32(), causing an out-of-bounds read of the skb payload. Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after rdma link add rxe0 type rxe netdev eth0 A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and QPN=IB_MULTICAST_QPN triggers: BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170 Read of size 1 at addr ... The buggy address is located 0 bytes to the right of allocated 704-byte region Call Trace: crc32_le+0x115/0x170 rxe_icrc_hdr.isra.0+0x226/0x300 rxe_icrc_check+0x13f/0x3a0 rxe_rcv+0x6e1/0x16e0 rxe_udp_encap_recv+0x20a/0x320 udp_queue_rcv_one_skb+0x7ed/0x12c0 Subsequent packets with the same shape fault on unmapped memory and panic the kernel. The trigger requires only module load and "rdma link add"; no QP, no connection, and no authentication. Fix this by rejecting packets whose opcode has no rxe_opcode[] entry, detected via the zero mask or zero length, before any length arithmetic runs. Cc: stable@vger.kernel.org Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://patch.msgid.link/r/20260414111555.3386793-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito Reviewed-by: Zhu Yanjun Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit d415fce3fcde6d7aeea6c25362a395b905811452 Author: Michael Bommarito Date: Sat Apr 18 12:21:41 2026 -0400 RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads commit 1114c87aa6f195cf07da55a27b2122ae26557b26 upstream. atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. Cc: stable@vger.kernel.org Fixes: 034e285f8b99 ("RDMA/rxe: Make responder support atomic write on RC service") Link: https://patch.msgid.link/r/20260418162141.3610201-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Zhu Yanjun Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 75fc130664ae324e7b2f9ad3630e0f175e9ca6c8 Author: Jason Gunthorpe Date: Tue Apr 28 13:17:42 2026 -0300 RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp() commit 34fbf48cf3b410d2a6e8c586fa952a36331ca5ba upstream. Sashiko points out that pd->uctx isn't initialized until late in the function so all these error flow references are NULL and will crash. Use the uctx that isn't NULL. Cc: stable@vger.kernel.org Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4 Link: https://patch.msgid.link/r/9-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit bc2cf5935b4665172235341163315905197ae91d Author: Junrui Luo Date: Fri Apr 24 13:51:02 2026 +0800 RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() commit c488df06bd552bb8b6e14fa0cfd5ad986c6e9525 upstream. mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. Cc: stable@vger.kernel.org Fixes: 5895e70f2e6e ("IB/mlx5: Allocate resources just before first QP/SRQ is created") Link: https://patch.msgid.link/r/SYBPR01MB7881E1E0970268BD69C0BA75AF2B2@SYBPR01MB7881.ausprd01.prod.outlook.com Reported-by: Yuhao Jiang Signed-off-by: Junrui Luo Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 0dbd619716fb07b7de1acd64fec673ee6e1adde7 Author: Jason Gunthorpe Date: Tue Apr 28 13:17:44 2026 -0300 RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq() commit c54c7e4cb679c0aaa1cb489b9c3f2cd98e63a44c upstream. Sashiko points out that mlx4_srq_alloc() was not undone during error unwind, add the missing call to mlx4_srq_free(). Cc: stable@vger.kernel.org Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=8 Link: https://patch.msgid.link/r/11-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 11c1431d641e0e4e0529e96957995820600c7287 Author: Jason Gunthorpe Date: Tue Apr 28 13:17:37 2026 -0300 RDMA/mana: Validate rx_hash_key_len commit 6dd2d4ad9c8429523b1c220c5132bd551c006425 upstream. Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. Cc: stable@vger.kernel.org Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=1 Link: https://patch.msgid.link/r/4-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Reviewed-by: Long Li Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 8f23eb6c50f1a4bf32fc4d62cfb9fc39e8e586cf Author: Jason Gunthorpe Date: Tue Apr 28 13:17:39 2026 -0300 RDMA/mana: Fix mana_destroy_wq_obj() cleanup in mana_ib_create_qp_rss() commit 34ecf795692ee57c393109f4a24ccc313091e137 upstream. Sashiko points out there are two bugs here in the error unwind flow, both related to how the WQ table is unwound. First there is a double i-- on the first failure path due to the while loop having a i--, remove it. Second if mana_ib_install_cq_cb() fails then mana_create_wq_obj() is not undone due to the above i--. Cc: stable@vger.kernel.org Fixes: c15d7802a424 ("RDMA/mana_ib: Add CQ interrupt support for RAW QP") Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=1 Link: https://patch.msgid.link/r/6-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Reviewed-by: Long Li Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 726af85ea4af750b2f75095e24e3cd99797344cb Author: Jason Gunthorpe Date: Tue Apr 28 13:17:40 2026 -0300 RDMA/mana: Fix error unwind in mana_ib_create_qp_rss() commit 6aaa978c6b6218cfac15fe1dab17c76fe229ce3f upstream. Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal destroy path cleans it up. Cc: stable@vger.kernel.org Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter") Link: https://sashiko.dev/#/patchset/0-v1-e911b76a94d1%2B65d95-rdma_udata_rep_jgg%40nvidia.com?part=4 Link: https://patch.msgid.link/r/7-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Reviewed-by: Long Li Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 69ae0bb1d242235bf2b001a782f5b4c14798c00c Author: André Draszik Date: Mon Mar 2 13:32:05 2026 +0000 power: supply: max17042: avoid overflow when determining health commit 9a44949da669708f19d29141e65b3ac774d08f5a upstream. If vmax has the default value of INT_MAX (e.g. because not specified in DT), battery health is reported as over-voltage. This is because adding any value to vmax (the vmax tolerance in this case) causes it to wrap around, making it negative and smaller than the measured battery voltage. Avoid that by using size_add(). Fixes: edd4ab055931 ("power: max17042_battery: add HEALTH and TEMP_* properties support") Cc: stable@vger.kernel.org Signed-off-by: André Draszik Link: https://patch.msgid.link/20260302-max77759-fg-v3-6-3c5f01dbda23@linaro.org Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 35de3512f372c0916663bfe05725d5d784b119c2 Author: Lukas Wunner Date: Mon Feb 16 08:46:13 2026 +0100 PCI/ASPM: Fix pci_clear_and_set_config_dword() usage commit cc33985d26c92a5c908c0185239c59ec35b8637c upstream. When aspm_calc_l12_info() programs the L1 PM Substates Control 1 register fields Common_Mode_Restore_Time, LTR_L1.2_THRESHOLD_Value and _Scale, it invokes pci_clear_and_set_config_dword() in an incorrect way: For the bits to clear it selects those corresponding to the field. So far so good. But for the bits to set it passes a full register value. pci_clear_and_set_config_dword() performs a boolean OR operation which sets all bits of that value, not just the ones that were just cleared. Thus, when setting the LTR_L1.2_THRESHOLD_Value and _Scale on the child of an ASPM link, aspm_calc_l12_info() also sets the Common_Mode_Restore_Time. That's a spec violation: PCIe r7.0 sec 7.8.3.3 says this field is RsvdP for Upstream Ports. On Adrià's Pixelbook Eve, Common_Mode_Restore_Time of the Intel 7265 "Stone Peak" wifi card is zero, yet aspm_calc_l12_info() does not preserve the zero bits but instead programs the value calculated for the Root Port into the wifi card. Likewise, when setting the Common_Mode_Restore_Time on the Root Port, aspm_calc_l12_info() also changes the LTR_L1.2_THRESHOLD_Value and _Scale from the initial 163840 nsec to 237568 nsec (due to ORing those fields), only to reduce it afterwards to 106496 nsec. Amend all invocations of pci_clear_and_set_config_dword() to only set bits which are cleared. Finally, when setting the T_POWER_ON_Value and _Scale on the Root Port and the wifi card, aspm_calc_l12_info() fails to preserve bits declared RsvdP and instead overwrites them with zeroes. Replace pci_write_config_dword() with pci_clear_and_set_config_dword() to avoid this. Fixes: aeda9adebab8 ("PCI/ASPM: Configure L1 substate settings") Link: https://bugzilla.kernel.org/show_bug.cgi?id=220705#c22 Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Tested-by: Adrià Vilanova Martínez Cc: stable@vger.kernel.org # v4.11+ Link: https://patch.msgid.link/5c1752d7512eed0f4ea57b84b12d7ee08ca61fc5.1771226659.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman commit 0ea88fb24dcce641e39c005b9f67ccb4c3e4e74c Author: Lukas Wunner Date: Fri Mar 27 10:56:43 2026 +0100 PCI/AER: Stop ruling out unbound devices as error source commit 1ab4a3c805084d752ec571efc78272295a9f2f74 upstream. When searching for the error source, the AER driver rules out devices whose enable_cnt is zero. This was introduced in 2009 by commit 28eb27cf0839 ("PCI AER: support invalid error source IDs") without providing a rationale. Drivers typically call pci_enable_device() on probe, hence the enable_cnt check essentially filters out unbound devices. At the time of the commit, drivers had to opt in to AER by calling pci_enable_pcie_error_reporting() and so any AER-enabled device could be assumed to be bound to a driver. The check thus made sense because it allowed skipping config space accesses to devices which were known not to be the error source. But since 2022, AER is universally enabled on all devices when they are enumerated, cf. commit f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"). Errors may very well be reported by unbound devices, e.g. due to link instability. By ruling them out as error source, errors reported by them are neither logged nor cleared. When they do get bound and another error occurs, the earlier error is reported together with the new error, which may confuse users. Stop doing so. Fixes: f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native") Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Stefan Roese Cc: stable@vger.kernel.org # v6.0+ Link: https://patch.msgid.link/734338c2e8b669db5a5a3b45d34131b55ffebfca.1774605029.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman commit 7481dcfb314a50748ca3409df169163462a16eac Author: Shuai Xue Date: Wed Feb 11 20:46:24 2026 +0800 PCI/AER: Clear only error bits in PCIe Device Status commit a8aeea1bf3c80cc87983689e0118770e019bd4f3 upstream. Currently, pcie_clear_device_status() clears the entire PCIe Device Status register (PCI_EXP_DEVSTA) by writing back the value read from the register, which affects not only the error status bits but also other writable bits. According to PCIe r7.0, sec 7.5.3.5, this register contains: - RW1C error status bits (CED, NFED, FED, URD at bits 0-3): These are the four error status bits that need to be cleared. - Read-only bits (AUXPD at bit 4, TRPND at bit 5): Writing to these has no effect. - Emergency Power Reduction Detected (bit 6): A RW1C non-error bit introduced in PCIe r5.0 (2019). This is currently the only writable non-error bit in the Device Status register. Unconditionally clearing this bit can interfere with other software components that rely on this power management indication. - Reserved bits (RsvdZ): These bits are required to be written as zero. Writing 1s to them (as the current implementation may do) violates the specification. To prevent unintended side effects, modify pcie_clear_device_status() to only write 1s to the four error status bits (CED, NFED, FED, URD), leaving the Emergency Power Reduction Detected bit and reserved bits unaffected. Fixes: ec752f5d54d7 ("PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL") Suggested-by: Lukas Wunner Signed-off-by: Shuai Xue Signed-off-by: Bjorn Helgaas Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Lukas Wunner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260211124624.49656-1-xueshuai@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman commit 8b5153924c86e3902ecee09b1e4cc93587566c53 Author: Lukas Wunner Date: Wed Apr 15 17:56:06 2026 +0200 PCI: Update saved_config_space upon resource assignment commit 909f7bf9b080c10df3c3b38533906dbf09ff1d8b upstream. Bernd reports passthrough failure of a Digital Devices Cine S2 V6 DVB adapter plugged into an ASRock X570S PG Riptide board with BIOS version P5.41 (09/07/2023): ddbridge 0000:05:00.0: detected Digital Devices Cine S2 V6 DVB adapter ddbridge 0000:05:00.0: cannot read registers ddbridge 0000:05:00.0: fail BIOS assigns an incorrect BAR to the DVB adapter which doesn't fit into the upstream bridge window. The kernel corrects the BAR assignment: pci 0000:07:00.0: BAR 0 [mem 0xfffffffffc500000-0xfffffffffc50ffff 64bit]: can't claim; no compatible bridge window pci 0000:07:00.0: BAR 0 [mem 0xfc500000-0xfc50ffff 64bit]: assigned Correction of the BAR assignment happens in an x86-specific fs_initcall, pcibios_assign_resources(), after device enumeration in a subsys_initcall. This order was introduced at the behest of Linus in 2004: https://git.kernel.org/tglx/history/c/a06a30144bbc No other architecture performs such a late BAR correction. Bernd bisected the issue to commit a2f1e22390ac ("PCI/ERR: Ensure error recoverability at all times"), but it only occurs in the absence of commit 4d4c10f763d7 ("PCI: Explicitly put devices into D0 when initializing"). This combination exists in stable kernel v6.12.70, but not in mainline, hence Bernd cannot reproduce the issue with mainline. Since a2f1e22390ac, config space is saved on enumeration, prior to BAR correction. Upon passthrough, the corrected BAR is overwritten with the incorrect saved value by: vfio_pci_core_register_device() vfio_pci_set_power_state() pci_restore_state() But only if the device's current_state is PCI_UNKNOWN, as it was prior to commit 4d4c10f763d7. Since the commit, it is PCI_D0, which changes the behavior of vfio_pci_set_power_state() to no longer restore the state without saving it first. Alexandre is reporting the same issue as Bernd, but in his case, mainline is affected as well. The difference is that on Alexandre's system, the host kernel binds a driver to the device which is unbound prior to passthrough, whereas on Bernd's system no driver gets bound by the host kernel. Unbinding sets current_state to PCI_UNKNOWN in pci_device_remove(), so when vfio-pci is subsequently bound to the device, pci_restore_state() is once again called without invoking pci_save_state() first. To robustly fix the issue, always update saved_config_space upon resource assignment. Reported-by: Bernd Schumacher Closes: https://lore.kernel.org/r/acfZrlP0Ua_5D3U4@eldamar.lan/ Reported-by: Alexandre N. Closes: https://lore.kernel.org/r/dd3c3358-de0f-4a56-9c81-04aceaab4058@mailo.com/ Fixes: a2f1e22390ac ("PCI/ERR: Ensure error recoverability at all times") Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Tested-by: Bernd Schumacher Tested-by: Alexandre N. Cc: stable@vger.kernel.org # v6.12+ Link: https://patch.msgid.link/febc3f354e0c1f5a9f5b3ee9ffddaa44caccf651.1776268054.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman commit c88802d0e8edd14b6cd2daf3000f99adbc4c85c5 Author: SeongJae Park Date: Thu Apr 23 08:02:51 2026 -0700 mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock commit 1e68eb96e8beb1abefd12dd22c5637795d8a877e upstream. Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path". Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race with their writes, results in use-after-free. Fix those. This patch (of 2): damon_sysfs_scheme_filter->mmecg_path can be read and written by users, via DAMON sysfs memcg_path file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the memcg_path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock. Link: https://lore.kernel.org/20260423150253.111520-1-sj@kernel.org Link: https://lore.kernel.org/20260423150253.111520-2-sj@kernel.org Fixes: 4f489fe6afb3 ("mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write") Co-developed-by: Junxi Qian Signed-off-by: Junxi Qian Signed-off-by: SeongJae Park Cc: # 6.16.x Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 45fc766bc756ff1d66f8ca026a9c4f7f764adfae Author: Paolo Bonzini Date: Mon Apr 27 14:25:40 2026 +0200 KVM: x86: check for nEPT/nNPT in slow flush hypercalls commit 464af6fc2b1dcc74005b7f58ee3812b17777efee upstream. Checking is_guest_mode(vcpu) is incorrect, because translate_nested_gpa() is only valid if an L2 guest is running *with nested EPT/NPT enabled*. Instead use the same condition as translate_nested_gpa() itself. Cc: stable@vger.kernel.org Reviewed-by: Sean Christopherson Fixes: aee738236dca ("KVM: x86: Prepare kvm_hv_flush_tlb() to handle L2's GPAs", 2022-11-18) Link: https://patch.msgid.link/20260503200905.106077-1-pbonzini@redhat.com/ Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 3b1ddba19e77ee35241cd27f16dc3e8d14e08db7 Author: Michael Bommarito Date: Mon Apr 20 10:47:47 2026 -0400 smb: client: validate dacloffset before building DACL pointers commit f98b48151cc502ada59d9778f0112d21f2586ca3 upstream. parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 941a1e6eb35440336913afc88a82103291956d5d Author: Bjoern Doebel Date: Thu Apr 30 08:57:17 2026 +0000 smb: client: use kzalloc to zero-initialize security descriptor buffer commit 5e489c6c47a2ac15edbaca153b9348e42c1eacab upstream. Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces to le16") split struct smb_acl's __le32 num_aces field into __le16 num_aces and __le16 reserved. The reserved field corresponds to Sbz2 in the MS-DTYP ACL wire format, which must be zero [1]. When building an ACL descriptor in build_sec_desc(), we are using a kmalloc()'ed descriptor buffer and writing the fields explicitly using le16() writes now. This never writes to the 2 byte reserved field, leaving it as uninitialized heap data. When the reserved field happens to contain non-zero slab garbage, Samba rejects the security descriptor with "ndr_pull_security_descriptor failed: Range Error", causing chmod to fail with EINVAL. Change kmalloc() to kzalloc() to ensure the entire buffer is zero-initialized. Fixes: 62e7dd0a39c2d ("smb: common: change the data type of num_aces to le16") Cc: stable@vger.kernel.org Signed-off-by: Bjoern Doebel Assisted-by: Kiro:claude-opus-4.6 [1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428 Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 15dc0a4de743a1aaa7b859b3aea79f08c695396c Author: Zisen Ye Date: Sat May 2 18:48:36 2026 +0800 smb/client: fix out-of-bounds read in symlink_data() commit d62b8d236fab503c6fec1d3e9a38bea71feaca20 upstream. Since smb2_check_message() returns success without length validation for the symlink error response, in symlink_data() it is possible for iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer only contains the base SMB2 header (64 bytes), accessing err->ErrorContextCount (at offset 66) or err->ByteCount later in symlink_data() will cause an out-of-bounds read. Link: https://lore.kernel.org/linux-cifs/297d8d9b-adf7-42fd-a1c2-5b1f230032bc@chenxiaosong.com/ Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Cc: Stable@vger.kernel.org Signed-off-by: Zisen Ye Reviewed-by: ChenXiaoSong Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 9b3af35645ff9cd334edc130249f9a2fb2bea25f Author: Zisen Ye Date: Wed May 6 11:49:08 2026 +0800 smb/client: fix out-of-bounds read in smb2_compound_op() commit 8d09328dfda089675e4c049f3f256064a1d1996b upstream. If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. Link: https://lore.kernel.org/linux-cifs/d998240c-aca9-420d-9dbd-f5ba24af19e0@chenxiaosong.com/ Fixes: ea41367b2a60 ("smb: client: introduce SMB2_OP_QUERY_WSL_EA") Cc: stable@vger.kernel.org Signed-off-by: Zisen Ye Reviewed-by: ChenXiaoSong Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit d4163b5b4370a1ec2496a3192b27c42739714eed Author: Vasily Gorbik Date: Fri Apr 17 14:33:43 2026 +0200 s390/debug: Reject zero-length input in debug_input_flush_fn() commit e14622a7584f9608927c59a7d6ae4a0999dc545e upstream. debug_input_flush_fn() always copies one byte from the userspace buffer with copy_from_user() regardless of the supplied write length. A zero-length write therefore reads one byte beyond the caller's buffer. If the stale byte happens to be '-' or a digit the debug log is silently flushed. With an unmapped buffer the call returns -EFAULT. Reject zero-length writes before copying from userspace. Cc: stable@vger.kernel.org # v5.10+ Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Alexander Gordeev Signed-off-by: Greg Kroah-Hartman commit fcf6a832c0d5b2bc5398d6996c5570d3ee7993fb Author: Jason Gunthorpe Date: Tue Apr 28 13:17:48 2026 -0300 RDMA/hns: Fix unlocked call to hns_roce_qp_remove() commit 0c99acbc8b6c6dd526ae475a48ee1897b61072fb upstream. Sashiko points out that hns_roce_qp_remove() requires the caller to hold locks. The error flow in hns_roce_create_qp_common() doesn't hold those locks for the error unwind so it risks corrupting memory. Grab the same locks the other two callers use. Cc: stable@vger.kernel.org Fixes: e088a685eae9 ("RDMA/hns: Support rq record doorbell for the user space") Link: https://sashiko.dev/#/patchset/0-v2-1c49eeb88c48%2B91-rdma_udata_rep_jgg%40nvidia.com?part=9 Link: https://patch.msgid.link/r/15-v1-41f3135e5565+9d2-rdma_ai_fixes1_jgg@nvidia.com Reviewed-by: Junxian Huang Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 361518a26e4434e879db6ff43bf364795dcbfbff Author: Ulf Hansson Date: Fri Apr 17 13:13:31 2026 +0200 pmdomain: core: Fix detach procedure for virtual devices in genpd commit 26735dfdd8930d9ef1fa92e590a9bf77726efdf6 upstream. If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach(). Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/ Fixes: 3c095f32a92b ("PM / Domains: Add support for multi PM domains per device to genpd") Cc: stable@vger.kernel.org Tested-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 6522d59fb7de55ce0f0f285d962243ddffebb01f Author: Ilya Maximets Date: Fri May 1 01:38:37 2026 +0200 openvswitch: vport: fix self-deadlock on release of tunnel ports commit aa69918bd418e700309fdd08509dba324fb24296 upstream. vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released. Fixes: 6931d21f87bc ("openvswitch: defer tunnel netdev_put to RCU release") Cc: stable@vger.kernel.org Acked-by: Eelco Chaudron Signed-off-by: Ilya Maximets Acked-by: Aaron Conole Link: https://patch.msgid.link/20260430233848.440994-2-i.maximets@ovn.org Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit ee6e20c4bc9eae542a0954a368449532383169d4 Author: Chaitanya Kulkarni Date: Wed Apr 8 17:56:47 2026 -0700 nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free commit aade8abd8b868b6ffa9697aadaea28ec7f65bee6 upstream. nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306583] ? __flush_work+0x20b/0x530 [ 5233.306585] __flush_work+0x268/0x530 [ 5233.306588] ? __pfx_wq_barrier_func+0x10/0x10 [ 5233.306594] ? xen_error_entry+0x30/0x60 [ 5233.306600] nvmet_ctrl_free+0x140/0x310 [nvmet] [ 5233.306617] nvmet_cq_put+0x74/0x90 [nvmet] [ 5233.306629] nvmet_tcp_release_queue_work+0x19f/0x360 [nvmet_tcp] [ 5233.306634] process_one_work+0x206/0x6e0 [ 5233.306640] worker_thread+0x184/0x320 [ 5233.306643] ? __pfx_worker_thread+0x10/0x10 [ 5233.306646] kthread+0xf1/0x130 [ 5233.306648] ? __pfx_kthread+0x10/0x10 [ 5233.306651] ret_from_fork+0x355/0x450 [ 5233.306653] ? __pfx_kthread+0x10/0x10 [ 5233.306656] ret_from_fork_asm+0x1a/0x30 [ 5233.306664] There is also no need to flush async_event_work from controller teardown. The admin queue teardown already fails outstanding AER requests before the final controller put :- nvmet_sq_destroy(admin sq) nvmet_async_events_failall(ctrl) The controller has already been removed from the subsystem list before nvmet_ctrl_free() quiesces outstanding work. Replace flush_work() with cancel_work_sync() so a pending async_event_work item is canceled and a running instance is waited on without recursing into the same workqueue. Fixes: 06406d81a2d7 ("nvmet: cancel fatal error and flush async work before free controller") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 49891c8fe0cb43fbbe480da1cdccfbbaeb820cb3 Author: Chaitanya Kulkarni Date: Wed Apr 8 00:51:31 2026 -0700 nvmet-tcp: fix race between ICReq handling and queue teardown commit 5293a8882c549fab4a878bc76b0b6c951f980a61 upstream. nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver") Cc: stable@vger.kernel.org Reported-by: Shivam Kumar Tested-by: Shivam Kumar Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 6460c0e359d3885ef730b7a4242bf190c90badc1 Author: Fedor Pchelkin Date: Wed Apr 8 17:18:14 2026 +0300 nvme-apple: drop invalid put of admin queue reference count commit ba9d308ccd6732dd97ed8080d834a4a89e758e14 upstream. Commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") moved the admin queue reference ->put call into nvme_free_ctrl() - a controller device release callback performed for every nvme driver doing nvme_init_ctrl(). nvme-apple sets refcount of the admin queue to 1 at allocation during the probe function and then puts it twice now: nvme_free_ctrl() blk_put_queue(ctrl->admin_q) // #1 ->free_ctrl() apple_nvme_free_ctrl() blk_put_queue(anv->ctrl.admin_q) // #2 Note that there is a commit 941f7298c70c ("nvme-apple: remove an extra queue reference") which intended to drop taking an extra admin queue reference. Looks like at that moment it accidentally fixed a refcount leak, which existed since the driver's introduction. There were two ->get calls at driver's probe function and a single ->put inside apple_nvme_free_ctrl(). However now after commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") the refcount is imbalanced again. Fix it by removing extra ->put call from apple_nvme_free_ctrl(). anv->dev and ctrl->dev point to the same device, so use ctrl->dev directly for simplification. Compile tested only. Found by Linux Verification Center (linuxtesting.org). Fixes: 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Fedor Pchelkin Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 9d8e03b9a2b1e8ce5c198bf3a409a629f4d02cda Author: Junrui Luo Date: Thu Apr 16 11:39:56 2026 +0800 md/raid10: fix divide-by-zero in setup_geo() with zero far_copies commit 9aa6d860b0930e2f72795665c42c44252a558a0c upstream. setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero. Fixes: 475901aff158 ("MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)") Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Link: https://lore.kernel.org/linux-raid/SYBPR01MB7881A5E2556806CC1D318582AF232@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Yu Kuai Signed-off-by: Greg Kroah-Hartman commit 408e85ee708b6aa03eeb0220ffa0915f4d407181 Author: Raphael Zimmer Date: Tue Apr 21 10:27:01 2026 +0200 libceph: Fix slab-out-of-bounds access in auth message processing commit 1c439de70b1c3eb3c6bffa8245c16b9fc318f114 upstream. If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this. Cc: stable@vger.kernel.org Signed-off-by: Raphael Zimmer Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov Signed-off-by: Greg Kroah-Hartman commit e5d416b2488ec279bb902ab9496383bc4c5a78ab Author: Christian A. Ehrhardt Date: Thu Mar 26 22:49:02 2026 +0100 lib/scatterlist: fix temp buffer in extract_user_to_sg() commit 118cf3f55975352ac357fb194405031458186819 upstream. Instead of allocating a temporary buffer for extracted user pages extract_user_to_sg() uses the end of the to be filled scatterlist as a temporary buffer. Fix the calculation of the start address if the scatterlist already contains elements. The unused space starts at sgtable->sgl + sgtable->nents not directly at sgtable->nents and the temporary buffer is placed at the end of this unused space. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary. Pointed out by sashiko.dev on a previous iteration of this series. Link: https://lkml.kernel.org/r/20260326214905.818170-3-lk@c--e.de Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist") Signed-off-by: Christian A. Ehrhardt Cc: David Howells Cc: David Gow Cc: Kees Cook Cc: Petr Mladek Cc: [v6.5+] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit e5e22fc9963469e678c4f4bb38d26adcec107f1e Author: Christian A. Ehrhardt Date: Thu Mar 26 22:49:01 2026 +0100 lib/scatterlist: fix length calculations in extract_kvec_to_sg commit 07b7d66e65d9cfe6b9c2c34aa22cfcaac37a5c45 upstream. Patch series "Fix bugs in extract_iter_to_sg()", v3. Fix bugs in the kvec and user variants of extract_iter_to_sg. This series is growing due to useful remarks made by sashiko.dev. The main bugs are: - The length for an sglist entry when extracting from a kvec can exceed the number of bytes in the page. This is obviously not intended. - When extracting a user buffer the sglist is temporarily used as a scratch buffer for extracted page pointers. If the sglist already contains some elements this scratch buffer could overlap with existing entries in the sglist. The series adds test cases to the kunit_iov_iter test that demonstrate all of these bugs. Additionally, there is a memory leak fix for the test itself. The bugs were orignally introduced into kernel v6.3 where the function lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in v6.5. Thus the actual fix is only marked for backports to v6.5+. This patch (of 5): When extracting from a kvec to a scatterlist, do not cross page boundaries. The required length was already calculated but not used as intended. Adjust the copied length if the loop runs out of sglist entries without extracting everything. While there, return immediately from extract_iter_to_sg if there are no sglist entries at all. A subsequent commit will add kunit test cases that demonstrate that the patch is necessary. Link: https://lkml.kernel.org/r/20260326214905.818170-1-lk@c--e.de Link: https://lkml.kernel.org/r/20260326214905.818170-2-lk@c--e.de Fixes: 018584697533 ("netfs: Add a function to extract an iterator into a scatterlist") Signed-off-by: Christian A. Ehrhardt Cc: David Gow Cc: David Howells Cc: Kees Cook Cc: Petr Mladek Cc: [v6.5+] Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 26d3a97ad46c7a9226ec04d4bf35bd4998a97d16 Author: Lukas Wunner Date: Sun Apr 12 16:19:47 2026 +0200 lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl() commit 8c2f1288250a90a4b5cabed5d888d7e3aeed4035 upstream. Yiming reports an integer underflow in mpi_read_raw_from_sgl() when subtracting "lzeros" from the unsigned "nbytes". For this to happen, the scatterlist "sgl" needs to occupy more bytes than the "nbytes" parameter and the first "nbytes + 1" bytes of the scatterlist must be zero. Under these conditions, the while loop iterating over the scatterlist will count more zeroes than "nbytes", subtract the number of zeroes from "nbytes" and cause the underflow. When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally introduced the bug, it couldn't be triggered because all callers of mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to "nbytes". However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists"), the underflow can now actually be triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a larger "out_len" than "in_len" and filling the "in" buffer with zeroes, crypto_akcipher_sync_prep() will create an all-zero scatterlist used for both the "src" and "dst" member of struct akcipher_request and thereby fulfil the conditions to trigger the bug: sys_keyctl() keyctl_pkey_e_d_s() asymmetric_key_eds_op() software_key_eds_op() crypto_akcipher_sync_encrypt() crypto_akcipher_sync_prep() crypto_akcipher_encrypt() rsa_enc() mpi_read_raw_from_sgl() To the user this will be visible as a DoS as the kernel spins forever, causing soft lockup splats as a side effect. Fix it. Reported-by: Yiming Qian # off-list Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Ignat Korchagin Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/59eca92ff4f87e2081777f1423a0efaaadcfdb39.1776003111.git.lukas@wunner.de Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman commit bb81d5c5eac6ae43a6363320c854288d8ce817df Author: Nicolin Chen Date: Tue Mar 17 00:59:16 2026 -0700 iommu/arm-smmu-v3: Add a missing dma_wmb() for hitless STE update commit 6fabce53f6b9c2419012a9103e1a46d40888cefa upstream. When writing a new (previously invalid) valid IOPTE to a page table, then installing the page table into an STE hitlesslessly (e.g. in S2TTB field), there is a window before an STE invalidation, where the page-table may be accessed by SMMU but the new IOPTE is still siting in the CPU cache. This could occur when we allocate an iommu_domain and immediately install it hitlessly, while there would be no dma_wmb() for the page table memory prior to the earliest point of HW reading the STE. Fix it by adding a dma_wmb() prior to updating the STE. Fixes: 56e1a4cc2588 ("iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry") Cc: stable@vger.kernel.org Reported-by: Will Deacon Closes: https://lore.kernel.org/linux-iommu/aXdlnLLFUBwjT0V5@willie-the-truck/ Suggested-by: Jason Gunthorpe Signed-off-by: Nicolin Chen Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 0a1af74ae2177bda3aee0837a0546309aa539d0d Author: Michael Bommarito Date: Sun Apr 19 17:21:55 2026 -0400 isofs: validate block number from NFS file handle in isofs_export_iget commit 24376458138387fb251e782e624c7776e9826796 upstream. isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker- controlled block number (ifid->block or ifid->parent_block) from the NFS file handle to isofs_export_iget(), which only rejects block == 0 before calling isofs_iget() and ultimately sb_bread(). A crafted file handle with fh_len sufficient to pass the check added by commit 0405d4b63d08 ("isofs: Prevent the use of too small fid") can still drive the server to read any in-range block on the backing device as if it were an iso_directory_record. That earlier fix was assigned CVE-2025-37780. sb_bread() on an out-of-range block returns NULL cleanly via the EIO path, so there is no memory-safety violation. For in-range reads of adjacent-partition data on the same block device, the unrelated bytes end up in iso_inode_info fields that reach the NFS client as dentry metadata. The deployment surface (isofs exported over NFS from loop-mounted images) is narrow and requires an authenticated NFS peer, but the malformed-file-handle class is reportable as hardening next to the existing CVE-2025-37780 fix. Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent() call sites with a single line. Fixes: 0405d4b63d08 ("isofs: Prevent the use of too small fid") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419212155.2169382-3-michael.bommarito@gmail.com Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 22b36fa081f38ab397c7697f9d539211b51a0cfc Author: Michael Bommarito Date: Sun Apr 19 17:21:54 2026 -0400 isofs: validate Rock Ridge CE continuation extent against volume size commit a36d990f591320e9dd379ab30063ebfe91d47e1f upstream. rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE record and passes it to sb_bread() without checking that the block number is within the mounted ISO 9660 volume. commit e595447e177b ("[PATCH] rock.c: handle corrupted directories") added cont_offset and cont_size rejection for the CE continuation but did not validate the extent block number itself. commit f54e18f1b831 ("isofs: Fix infinite looping over CE entries") later capped the CE chain length at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked. With a crafted ISO mounted via udisks2 (desktop optical auto-mount) or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at an out-of-range block or at blocks belonging to an adjacent filesystem on the same block device. sb_bread() on an out-of-range block returns NULL cleanly via the block layer EIO path, so there is no memory-safety violation. For in-range reads of adjacent- filesystem data, the CE buffer is parsed as Rock Ridge records and only the text of SL sub-records reaches userspace through readlink(), which makes the info-leak channel narrow and difficult to exploit; still, rejecting the malformed CE outright matches the rejection shape already present in the same function for cont_offset and cont_size. Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next to the existing offset/size rejection, printing the same corrupted-directory-entry notice. Fixes: f54e18f1b831 ("isofs: Fix infinite looping over CE entries") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419212155.2169382-2-michael.bommarito@gmail.com Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit adb19ed69dd974c18efaa7f86446005606688998 Author: Eric Biggers Date: Thu Feb 5 20:59:21 2026 -0800 dm-verity-fec: correctly reject too-small hash devices commit 4355142245f7e55336dcc005ec03592df4d546f8 upstream. Fix verity_fec_ctr() to reject too-small hash devices by correctly taking hash_start into account. Note that this is necessary because dm-verity doesn't call dm_bufio_set_sector_offset() on the hash device's bufio client (v->bufio). Thus, dm_bufio_get_device_size(v->bufio) returns a size relative to 0 rather than hash_start. An alternative fix would be to call dm_bufio_set_sector_offset() on v->bufio, but then all the code that reads from the hash device would have to be adjusted accordingly. Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 4dcf51197dfc1d0b8452e5a63b8f5adab9c5515f Author: Eric Biggers Date: Thu Feb 5 20:59:20 2026 -0800 dm-verity-fec: correctly reject too-small FEC devices commit 2b14e0bb63cc671120e7791658f5c494fc66d072 upstream. Fix verity_fec_ctr() to reject too-small FEC devices by correctly computing the number of parity blocks as 'f->rounds * f->roots'. Previously it incorrectly used 'div64_u64(f->rounds * f->roots, v->fec->roots << SECTOR_SHIFT)' which is a much smaller value. Note that the units of 'rounds' are blocks, not bytes. This matches the units of the value returned by dm_bufio_get_device_size(), which are also blocks. A later commit will give 'rounds' a clearer name. Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 44e64d8a432837308f4dda3ffe819f1ec092a0ba Author: David Carlier Date: Sat Apr 18 20:17:37 2026 +0100 eventfs: Hold eventfs_mutex and SRCU when remount walks events commit 07004a8c4b572171934390148ee48c4175c77eed upstream. Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the events descriptor") had eventfs_set_attrs() recurse through ei->children on remount. The walk only holds the rcu_read_lock() taken by tracefs_apply_options() over tracefs_inodes, which is wrong: - list_for_each_entry over ei->children races with the list_del_rcu() in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as d2603279c7d6. - eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...). rcu_read_lock() does not extend an SRCU grace period, so ti->private can be reclaimed under the walk. - The writes to ei->attr race with eventfs_set_attr(), which holds eventfs_mutex. Reproducer: while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done & while :; do echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events echo > /sys/kernel/tracing/kprobe_events done Wrap the events portion of tracefs_apply_options() in eventfs_remount_lock()/_unlock() that take eventfs_mutex and srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract. Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU. Fixes: 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the events descriptor") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260418191737.10289-1-devnexen@gmail.com Signed-off-by: David Carlier Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit d271631023cbe1cbe7c31a0275ab797883be6e0a Author: Mikulas Patocka Date: Thu Apr 9 17:49:58 2026 +0200 dm: fix a buffer overflow in ioctl processing commit 2fa49cc884f6496a915c35621ba4da35649bf159 upstream. Tony Asleson (using Claude) found a buffer overflow in dm-ioctl in the function retrieve_status: 1. The code in retrieve_status checks that the output string fits into the output buffer and writes the output string there 2. Then, the code aligns the "outptr" variable to the next 8-byte boundary: outptr = align_ptr(outptr); 3. The alignment doesn't check overflow, so outptr could point past the buffer end 4. The "for" loop is iterated again, it executes: remaining = len - (outptr - outbuf); 5. If "outptr" points past "outbuf + len", the arithmetics wraps around and the variable "remaining" contains unusually high number 6. With "remaining" being high, the code writes more data past the end of the buffer Luckily, this bug has no security implications because: 1. Only root can issue device mapper ioctls 2. The commonly used libraries that communicate with device mapper (libdevmapper and devicemapper-rs) use buffer size that is aligned to 8 bytes - thus, "outptr = align_ptr(outptr)" can't overshoot the input buffer and the bug can't happen accidentally Reported-by: Tony Asleson Signed-off-by: Mikulas Patocka Reviewed-by: Bryn M. Reeves Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit ac1b2452ee4f22d591b50dd516bd094dc0ca603b Author: Mikulas Patocka Date: Mon Mar 16 15:04:15 2026 +0100 dm: don't report warning when doing deferred remove commit b7cce3e2cca9cd78418f3c3784474b778e7996fe upstream. If dm_hash_remove_all was called from dm_deferred_remove, it would write a warning "remove_all left %d open device(s)" if there are some other devices active. The warning is bogus, so let's disable it in this case. Signed-off-by: Mikulas Patocka Reported-by: Zdenek Kabelac Cc: stable@vger.kernel.org Fixes: 2c140a246dc0 ("dm: allow remove to be deferred") Signed-off-by: Greg Kroah-Hartman commit 323d252a4a378834e4fe68298ca61cfc5dd3a460 Author: Mikulas Patocka Date: Mon Apr 20 19:56:44 2026 +0200 dm-thin: fix metadata refcount underflow commit 09a65adc7d8bbfce06392cb6d375468e2728ead5 upstream. There's a bug in dm-thin in the function rebalance_children. If the internal btree node has one entry, the code tries to copy all btree entries from the node's child to the node itself and then decrement the child's reference count. If the child node is shared (it has reference count > 1), we won't free it, so there would be two pointers to each of the grandchildren nodes. But the reference counts of the grandchildren is not increased, thus the reference count doesn't match the number of pointers that point to the grandchildren. This results in "device mapper: space map common: unable to decrement block" errors. Fix this bug by incrementing reference counts on the grandchildren if the btree node is shared. Signed-off-by: Mikulas Patocka Fixes: 3241b1d3e0aa ("dm: add persistent data library") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f414b3abbba59ef379a2b3c31f2bdd9358ed5e53 Author: Guangshuo Li Date: Wed Apr 1 18:56:19 2026 +0800 btrfs: fix double free in create_space_info() error path commit 3f487be81292702a59ea9dbc4088b3360a50e837 upstream. When kobject_init_and_add() fails, the call chain is: create_space_info() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&space_info->kobj) -> space_info_release() -> kfree(space_info) Then control returns to create_space_info(): btrfs_sysfs_add_space_info_type() returns error -> goto out_free -> kfree(space_info) This causes a double free. Keep the direct kfree(space_info) for the earlier failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup. Fixes: a11224a016d6d ("btrfs: fix memory leaks in create_space_info() error paths") CC: stable@vger.kernel.org # 6.19+ Reviewed-by: Qu Wenruo Signed-off-by: Guangshuo Li Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 52e4559fd59cc41c2f7633570530a61008e13d15 Author: Srinivas Kandagatla Date: Thu Apr 2 08:11:07 2026 +0000 ASoC: qcom: q6apm: remove child devices when apm is removed commit 4a0e1bcc98f7281d1605768bd2fe71eacc34f9b7 upstream. looks like q6apm driver does not remove the child driver q6apm-dai and q6apm-bedais when the this driver is removed. Fix this by depopulating them in remove callback. With this change when the dsp is shutdown all the devices associated with q6apm will now be removed. Fixes: 5477518b8a0e ("ASoC: qdsp6: audioreach: add q6apm support") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260402081118.348071-3-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c91b7bcc70346d07f57ef03d1b9a338324e213de Author: Srinivas Kandagatla Date: Thu Apr 2 08:11:09 2026 +0000 ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens commit 69acc488aaf39d0ddf6c3cf0e47c1873d39919a2 upstream. As prepare can be called mulitple times, this can result in multiple graph opens for playback path. This will result in a memory leaks, fix this by adding a check before opening. Fixes: be1fae62cf25 ("ASoC: q6apm-lpass-dai: close graph on prepare errors") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260402081118.348071-5-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit a9048afe1e698fd739eb6f4d6e14f807415de7ea Author: Srinivas Kandagatla Date: Thu Apr 2 08:11:10 2026 +0000 ASoC: qcom: q6apm-dai: reset queue ptr on trigger stop commit cab45ab95ce7600fc0ff84585c77fd45b7b0d67c upstream. Reset queue pointer on SNDRV_PCM_TRIGGER_STOP event to be inline with resetting appl_ptr. Without this we will end up with a queue_ptr out of sync and driver could try to send data that is not ready yet. Fix this by resetting the queue_ptr. Fixes: 3d4a4411aa8bb ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260402081118.348071-6-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit dd9fd0d0087e031ba8b82ee01e0f807b37a63be6 Author: Cássio Gabriel Date: Mon Apr 27 23:38:41 2026 -0300 ASoC: Intel: bytcr_wm5102: Fix MCLK leak on platform_clock_control error commit 13d30682e8dee191ac04e93642f0372a723e8b0c upstream. If byt_wm5102_prepare_and_enable_pll1() fails in the SND_SOC_DAPM_EVENT_ON() path, platform_clock_control() returns after clk_prepare_enable(priv->mclk) without disabling the clock again. This leaks an MCLK enable reference on failed power-up attempts. Add the missing clk_disable_unprepare() on the error path, matching the unwind used by the other Intel platform_clock_control() implementations. Fixes: 9a87fc1e0619 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Reviewed-by: Cezary Rojewski Reviewed-by: Hans de Goede Link: https://patch.msgid.link/20260427-bytcr-wm5102-mclk-leak-v1-1-02b96d08e99c@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 0e75db7eba13a969b25bb74d3a5e9e11707d8494 Author: Joseph Salisbury Date: Mon Mar 16 14:05:45 2026 -0400 ASoC: fsl_easrc: fix comment typo commit 804dce6c73fdfa44184ee4e8b09abad7f5da408f upstream. The file contains a spelling error in a source comment (funciton). Typos in comments reduce readability and make text searches less reliable for developers and maintainers. Replace 'funciton' with 'function' in the affected comment. This is a comment-only cleanup and does not change behavior. Fixes: 955ac624058f ("ASoC: fsl_easrc: Add EASRC ASoC CPU DAI drivers") Cc: stable@vger.kernel.org Signed-off-by: Joseph Salisbury Link: https://patch.msgid.link/20260316180545.144032-1-joseph.salisbury@oracle.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 07363785a856cd319bd6fc159342765ba29ce5c8 Author: Tommaso Soncin Date: Wed Apr 29 18:08:57 2026 +0200 ASoC: amd: yc: Add HP OMEN Gaming Laptop 16-ap0xxx product line in quirk table commit d63c219b7ff39f897da10c160a2edef76320f16c upstream. Add a DMI quirk for the HP OMEN Gaming Laptop 16-ap0xxx line fixing the issue where the internal microphone was not detected. Cc: stable@vger.kernel.org Signed-off-by: Tommaso Soncin Link: https://patch.msgid.link/20260429160858.538986-1-soncintommaso@gmail.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 0fd96b7ba25de0fdefea5f6d515c1c61a0e30b1a Author: Shrikanth Hegde Date: Wed Mar 11 11:47:09 2026 +0530 cpuidle: powerpc: avoid double clear when breaking snooze commit 64ed1e3e728afb57ba9acb59e69de930ead847d9 upstream. snooze_loop is done often in any system which has fair bit of idle time. So it qualifies for even micro-optimizations. When breaking the snooze due to timeout, TIF_POLLING_NRFLAG is cleared twice. Clearing the bit invokes atomics. Avoid double clear and thereby avoid one atomic write. dev->poll_time_limit indicates whether the loop was broken due to timeout. Use that instead of defining a new variable. Fixes: 7ded429152e8 ("cpuidle: powerpc: no memory barrier after break from idle") Cc: stable@vger.kernel.org Reviewed-by: Mukesh Kumar Chaurasiya (IBM) Signed-off-by: Shrikanth Hegde Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260311061709.1230440-1-sshegde@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit dbfcb09656cb30439577325c9dea2250203c2e3c Author: Conor Dooley Date: Tue Feb 24 09:35:25 2026 +0000 clk: microchip: mpfs-ccc: fix out of bounds access during output registration commit 2f7ae8ab6aa73daaf080d5332110357c29df9c36 upstream. UBSAN reported an out of bounds access during registration of the last two outputs. This out of bounds access occurs because space is only allocated in the hws array for two PLLs and the four output dividers that each has, but the defined IDs contain two DLLS and their two outputs each, which are not supported by the driver. The ID order is PLLs -> DLLs -> PLL outputs -> DLL outputs. Decrement the PLL output IDs by two while adding them to the array to avoid the problem. Fixes: d39fb172760e ("clk: microchip: add PolarFire SoC fabric clock support") CC: stable@vger.kernel.org Reviewed-by: Brian Masney Signed-off-by: Conor Dooley Signed-off-by: Greg Kroah-Hartman commit 271c969f0118f877317f09db02fda00817eec8b5 Author: Stefan Eichenberger Date: Thu Feb 12 16:57:50 2026 +0800 clk: imx: imx8-acm: fix flags for acm clocks commit f2c2fc93b4a3efdfcf3805ab74741826d343ff2c upstream. Currently, the flags for the ACM clocks are set to 0. This configuration causes the fsl-sai audio driver to fail when attempting to set the sysclk, returning an EINVAL error. The following error messages highlight the issue: fsl-sai 59090000.sai: ASoC: error at snd_soc_dai_set_sysclk on 59090000.sai: -22 imx-hdmi sound-hdmi: failed to set cpu sysclk: -22 By setting the flag CLK_SET_RATE_NO_REPARENT, we signal that the ACM driver does not support reparenting and instead relies on the clock tree as defined in the device tree. This change resolves the issue with the fsl-sai audio driver. CC: stable@vger.kernel.org Fixes: d3a0946d7ac9 ("clk: imx: imx8: add audio clock mux driver") Signed-off-by: Stefan Eichenberger Signed-off-by: Shengjiu Wang Reviewed-by: Peng Fan Link: https://patch.msgid.link/20260212085750.3253187-1-shengjiu.wang@nxp.com Signed-off-by: Abel Vesa Signed-off-by: Greg Kroah-Hartman commit 8822980668c96b5aa251c1e2daec1873262b8f3f Author: Johan Hovold Date: Tue Apr 14 15:43:19 2026 +0200 spi: topcliff-pch: fix use-after-free on unbind commit 9d72732fe70c11424bc90ed466c7ccfa58b42a9a upstream. Give the driver a chance to flush its queue before releasing the DMA buffers on driver unbind Fixes: c37f3c2749b5 ("spi/topcliff_pch: DMA support") Cc: stable@vger.kernel.org # 3.1 Cc: Tomoya MORINAGA Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260414134319.978196-9-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit fb7ba2a45461bb3666334390ff0086dcba3d38b7 Author: Johan Hovold Date: Tue Apr 14 15:43:18 2026 +0200 spi: topcliff-pch: fix controller deregistration commit 5d6f477d6fc0767c57c5e1e6f55a1662820eef87 upstream. Make sure to deregister the controller before disabling and releasing underlying resources like interrupts and DMA during driver unbind. Fixes: e8b17b5b3f30 ("spi/topcliff: Add topcliff platform controller hub (PCH) spi bus driver") Cc: stable@vger.kernel.org # 2.6.37 Cc: Masayuki Ohtake Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260414134319.978196-8-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 8a3353012a2b1ea7b3b7dc35bc90583299e353e6 Author: Thorsten Blum Date: Sat Mar 7 11:24:21 2026 +0100 thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp commit b3414148bbc1f9cd56217e58a558c6ac4fd1b4a6 upstream. The raw temperature data was never clamped to SPRD_THM_RAW_DATA_LOW or SPRD_THM_RAW_DATA_HIGH because the return value of clamp() was not used. Fix this by assigning the clamped value to 'rawdata'. Casting SPRD_THM_RAW_DATA_LOW and SPRD_THM_RAW_DATA_HIGH to u32 is also redundant and can be removed. Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Thorsten Blum Signed-off-by: Daniel Lezcano Reviewed-by: Baolin Wang Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260307102422.306055-2-thorsten.blum@linux.dev Signed-off-by: Greg Kroah-Hartman commit 8ea2546a8a4e42dd9e76d70de2f9fe3f6dec4f6a Author: Thorsten Blum Date: Sat Mar 7 11:24:20 2026 +0100 thermal/drivers/sprd: Fix temperature clamping in sprd_thm_temp_to_rawdata commit 83c0f9a5d679a6f8d84fc49b2f62ea434ccab4b6 upstream. The temperature was never clamped to SPRD_THM_TEMP_LOW or SPRD_THM_TEMP_HIGH because the return value of clamp() was not used. Fix this by assigning the clamped value to 'temp'. Casting SPRD_THM_TEMP_LOW and SPRD_THM_TEMP_HIGH to int is also redundant and can be removed. Fixes: 554fdbaf19b1 ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Thorsten Blum Signed-off-by: Daniel Lezcano Reviewed-by: Baolin Wang Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260307102422.306055-1-thorsten.blum@linux.dev Signed-off-by: Greg Kroah-Hartman commit a3c95b3b4414f7593fa0dca09540b6d3ec136f79 Author: Rafael J. Wysocki Date: Tue Apr 7 15:58:34 2026 +0200 thermal: core: Free thermal zone ID later during removal commit daae9c18feec74566e023fc88cfb0ce26e39d868 upstream. The thermal zone removal ordering is different from the thermal zone registration rollback path ordering and the former is arguably problematic because freeing a thermal zone ID prematurely may cause it to be used during the registration of another thermal zone which may fail as a result. Prevent that from occurring by changing the thermal zone removal ordering to reflect the thermal zone registration rollback path ordering. Also more the ida_destroy() call from thermal_zone_device_unregister() to thermal_release() for consistency. Fixes: b31ef8285b19 ("thermal core: convert ID allocation to IDA") Cc: All applicable Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/5063934.GXAFRqVoOG@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman commit 31605bbe94557bff721eaf041001169d44ac6f98 Author: Michael Bommarito Date: Mon Apr 13 17:12:40 2026 -0400 udf: reject descriptors with oversized CRC length commit 55d41b0a20128e86b9e960dd2e3f0a2d69a18df7 upstream. udf_read_tagged() skips CRC verification when descCRCLength + sizeof(struct tag) exceeds the block size. A crafted UDF image can set descCRCLength to an oversized value to bypass CRC validation entirely; the descriptor is then accepted based solely on the 8-bit tag checksum, which is trivially recomputable. Reject such descriptors instead of silently accepting them. A legitimate single-block descriptor should never have a CRC length that exceeds the block. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260413211240.853662-1-michael.bommarito@gmail.com Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit c25c9f381b03722b87c5da64538a01188a7cb57b Author: Johan Hovold Date: Thu Apr 9 14:04:17 2026 +0200 spi: microchip-core-qspi: fix controller deregistration commit e6464140d439f2d42f072eb422a5b1fec470c5a6 upstream. Make sure to deregister the controller before disabling underlying resources like interrupts during driver unbind. Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers") Cc: stable@vger.kernel.org # 6.1 Cc: Naga Sureshkumar Relli Signed-off-by: Johan Hovold Acked-by: Conor Dooley Link: https://patch.msgid.link/20260409120419.388546-19-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 2ca30340b5028ddc3f17086a538feeff06167b1b Author: Guangshuo Li Date: Thu Apr 16 17:53:27 2026 -0700 ice: fix double free in ice_sf_eth_activate() error path commit 9aab1c3d7299285e2569cbc0ed5892d631a241b2 upstream. When auxiliary_device_add() fails, ice_sf_eth_activate() jumps to aux_dev_uninit and calls auxiliary_device_uninit(&sf_dev->adev). The device release callback ice_sf_dev_release() frees sf_dev, but the current error path falls through to sf_dev_free and calls kfree(sf_dev) again, causing a double free. Keep kfree(sf_dev) for the auxiliary_device_init() failure path, but avoid falling through to sf_dev_free after auxiliary_device_uninit(). Fixes: 13acc5c4cdbe ("ice: subfunction activation and base devlink ops") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov Signed-off-by: Guangshuo Li Reviewed-by: Simon Horman Signed-off-by: Jacob Keller Link: https://patch.msgid.link/20260416-iwl-net-submission-2026-04-14-v2-3-686c33c9828d@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit db8012c631cb845e9ae2b4b531e17d86c9519755 Author: Mingming Cao Date: Fri Apr 24 09:29:17 2026 -0700 ibmveth: Disable GSO for packets with small MSS commit cc427d24ac6442ffdeafd157a63c7c5b73ed4de4 upstream. Some physical adapters on Power systems do not support segmentation offload when the MSS is less than 224 bytes. Attempting to send such packets causes the adapter to freeze, stopping all traffic until manually reset. Implement ndo_features_check to disable GSO for packets with small MSS values. The network stack will perform software segmentation instead. The 224-byte minimum matches ibmvnic commit ("ibmvnic: Enforce stronger sanity checks on GSO packets") which uses the same physical adapters in SEA configurations. The issue occurs specifically when the hardware attempts to perform segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets (gso_segs == 1) do not trigger the problematic LSO code path and are transmitted normally without segmentation. Add an ndo_features_check callback to disable GSO when MSS < 224 bytes. Also call vlan_features_check() to ensure proper handling of VLAN packets, particularly QinQ (802.1ad) configurations where the hardware parser may not support certain offload features. Validated using iptables to force small MSS values. Without the fix, the adapter freezes. With the fix, packets are segmented in software and transmission succeeds. Comprehensive regression testing completedd (MSS tests, performance, stability). Fixes: 8641dd85799f ("ibmveth: Add support for TSO") Cc: stable@vger.kernel.org Reviewed-by: Brian King Tested-by: Shaik Abdulla Tested-by: Naveed Ahmed Signed-off-by: Mingming Cao Link: https://patch.msgid.link/20260424162917.65725-1-mmc@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 15eb24645948a210584d147c84860e68e3a53515 Author: Hamza Mahfooz Date: Tue Apr 28 08:53:39 2026 -0400 hv_sock: fix ARM64 support commit b31681206e3f527970a7c7ed807fbf6a028fc25b upstream. VMBUS ring buffers must be page aligned. Therefore, the current value of 24K presents a challenge on ARM64 kernels (with 64K pages). So, use VMBUS_RING_SIZE() to ensure they are always aligned and large enough to hold all of the relevant data. Cc: stable@vger.kernel.org Fixes: 77ffe33363c0 ("hv_sock: use HV_HYP_PAGE_SIZE for Hyper-V communication") Tested-by: Dexuan Cui Reviewed-by: Dexuan Cui Signed-off-by: Hamza Mahfooz Acked-by: Stefano Garzarella Link: https://patch.msgid.link/20260428125339.13963-1-hamzamahfooz@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2a9090b83dcdb2e7ff892cc47397627d22ec28b3 Author: Bartosz Golaszewski Date: Mon Mar 9 13:42:37 2026 +0100 gpio: of: clear OF_POPULATED on hog nodes in remove path commit bbee90e750262bfb406d66dc65c46d616d2b6673 upstream. The previously set OF_POPULATED flag should be cleared on the hog nodes when removing the chip. Cc: stable@vger.kernel.org Fixes: 63636d956c455 ("gpio: of: Add DT overlay support for GPIO hogs") Acked-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-1-4e61f3dbf06a@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit adc8f9145a64d802632f15ecc7cccf2bc62b5e8e Author: Xu Yang Date: Sat Nov 15 10:59:05 2025 +0800 extcon: ptn5150: handle pending IRQ events during system resume commit 4652fefcda3c604c83d1ae28ede94544e2142f06 upstream. When the system is suspended and ptn5150 wakeup interrupt is disabled, any changes on ptn5150 will only be record in interrupt status registers and won't fire an IRQ since its trigger type is falling edge. So the HW interrupt line will keep at low state and any further changes won't trigger IRQ anymore. To fix it, this will schedule a work to check whether any IRQ are pending and handle it accordingly. Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Cc: stable@vger.kernel.org Reviewed-by: Krzysztof Kozlowski Acked-by: MyungJoo Ham Signed-off-by: Xu Yang Signed-off-by: Chanwoo Choi Link: https://lore.kernel.org/lkml/20251115025905.1395347-1-xu.yang_2@nxp.com/ Signed-off-by: Greg Kroah-Hartman commit 15c834d8f64f2f999f7b5643feb694cf8dabc0fa Author: Shyam Prasad N Date: Mon Mar 30 16:19:59 2026 +0530 cifs: change_conf needs to be called for session setup commit c208a2b95811d6e1ebae65d0d2fc13f73707f8e7 upstream. Today we skip calling change_conf for negotiates and session setup requests. This can be a problem for mchan as the immediate next call after session setup could be due to an I/O that is made on the mount point. For single channel, this is not a problem as there will be several calls after setting up session. This change enforces calling change_conf when the total credits contain enough for reservations for echoes and oplocks. We expect this to happen during the last session setup response. This way, echoes and oplocks are not disabled before the first request to the server. So if that first request is an open, it does not need to disable requesting leases. Cc: Reviewed-by: Bharath SM Signed-off-by: Shyam Prasad N Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 1f5c4051205684295667f1ccb07e02e01be775f7 Author: Shyam Prasad N Date: Tue Apr 28 21:37:47 2026 +0530 cifs: abort open_cached_dir if we don't request leases commit d68ce834f8cf6cb2e77f3331df65166b35466b53 upstream. It is possible that SMB2_open_init may not set lease context based on the requested oplock level. This can happen when leases have been temporarily or permanently disabled. When this happens, we will have open_cached_dir making an open without lease context and the response will anyway be rejected by open_cached_dir (thereby forcing a close to discard this open). That's unnecessary two round-trips to the server. This change adds a check before making the open request to the server to make sure that SMB2_open_init did add the expected lease context to the open in open_cached_dir. Cc: Reviewed-by: Bharath SM Signed-off-by: Shyam Prasad N Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit a7f3aa8c9df3905fe820ae36b67ba56b81587574 Author: Naman Jain Date: Fri Apr 10 15:34:13 2026 +0000 block: add pgmap check to biovec_phys_mergeable commit 13920e4b7b784b40cf4519ff1f0f3e513476a499 upstream. biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps. Fixes: 49580e690755 ("block: add check when merging zone device pages") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Naman Jain Link: https://patch.msgid.link/20260410153414.4159050-2-namjain@linux.microsoft.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 645b1ed3259af38b7814242a420bc2081bdd1eb6 Author: Jiexun Wang Date: Wed May 6 22:08:23 2026 +0800 af_unix: Reject SIOCATMARK on non-stream sockets commit d119775f2bad827edc28071c061fdd4a91f889a5 upstream. SIOCATMARK reports whether the receive queue is at the urgent mark for MSG_OOB. In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets. SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(), so they should not support SIOCATMARK either. Return -EOPNOTSUPP for non-stream sockets before checking the receive queue. Fixes: 314001f0bf92 ("af_unix: Add OOB support") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Suggested-by: Kuniyuki Iwashima Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260506140825.2987635-1-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ef27d8d3c456e1fa5d6929aff039736f0a8eafac Author: Myeonghun Pak Date: Fri Apr 24 22:50:51 2026 +0900 hwmon: (corsair-psu) Close HID device on probe errors commit 174606451fbb17db506ebaacdd5e203e57773d5f upstream. corsairpsu_probe() opens the HID device before sending the device init and firmware-info commands. If either command fails, the error path jumps directly to fail_and_stop and skips hid_hw_close(). Use the existing fail_and_close label for those post-open failures so the open count and low-level close callback are balanced before hid_hw_stop(). Fixes: d115b51e0e56 ("hwmon: add Corsair PSU HID controller driver") Cc: stable@vger.kernel.org Signed-off-by: Myeonghun Pak Reviewed-by: Wilken Gottwalt Link: https://lore.kernel.org/r/20260424135107.13720-1-mhun512@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 018f902d5ad833b041fc7c32cf86e39915b55dfc Author: Johan Hovold Date: Tue Apr 7 11:50:27 2026 +0200 clk: rk808: fix OF node reference imbalance commit de019f203b0d472c98ead4081ad4f05d92c9b826 upstream. The driver reuses the OF node of the parent multi-function device but fails to take another reference to balance the one dropped by the platform bus code when unbinding the MFD and deregistering the child devices. Fix this by using the intended helper for reusing OF nodes. Fixes: 2dc51ca822e4 ("clk: RK808: Reduce 'struct rk808' usage") Cc: stable@vger.kernel.org # 6.5 Cc: Sebastian Reichel Signed-off-by: Johan Hovold Reviewed-by: Sebastian Reichel Reviewed-by: Brian Masney Reviewed-by: Heiko Stuebner Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman commit 908bff2a29cb16d9f329ec3f9f339b4946861a43 Author: Sanman Pradhan Date: Thu Apr 16 21:59:40 2026 +0000 hwmon: (ltc2992) Fix u32 overflow in power read path commit 2da0c1fd01dbd6b22844e8676585153dfc660cbe upstream. ltc2992_get_power() computes the divisor for mul_u64_u32_div() as r_sense_uohm * 1000. This multiplication overflows u32 when r_sense_uohm exceeds about 4.29 ohms (4294967 micro-ohms), producing a truncated divisor and an incorrect power reading. Cancel the factor of 1000 from both the numerator (VADC_UV_LSB * IADC_NANOV_LSB = 312500000) and the divisor (r_sense_uohm * 1000), giving (VADC_UV_LSB / 1000) * IADC_NANOV_LSB = 312500 as the numerator and plain r_sense_uohm as the divisor. The cancellation is exact because LTC2992_VADC_UV_LSB (25000) is divisible by 1000. This is the read-path counterpart of the write-path fix applied in the preceding patch. Fixes: b0bd407e94b03 ("hwmon: (ltc2992) Add support") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260416215904.101969-3-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 88be7cbc33fcf21b529f28343a5ba952d44dddbd Author: Sanman Pradhan Date: Thu Apr 16 21:59:30 2026 +0000 hwmon: (ltc2992) Clamp threshold writes to hardware range commit d6cc7c99bf1f73eda7d565d224d791d16239bb41 upstream. ltc2992_set_voltage(), ltc2992_set_current(), and ltc2992_set_power() do not validate the user-supplied value before converting it to a register value. This can result in: 1. Negative input values wrapping to large positive register values. For power, the negative long is implicitly cast to u64 in mul_u64_u32_div(), producing an incorrect value. For voltage and current, the negative converted value wraps when passed to ltc2992_write_reg() as a u32. 2. Intermediate arithmetic exceeding the range representable in u64 on 64-bit platforms. In ltc2992_set_voltage(), (u64)val * 1000 can exceed U64_MAX when val is a large positive long. In ltc2992_set_current(), (u64)val * r_sense_uohm can overflow similarly. In ltc2992_set_power(), the computed value may not fit in u64. 3. Register values exceeding the hardware field width. Voltage and current threshold registers are 12-bit (stored left-justified in 16 bits), and power threshold registers are 24-bit. Without clamping, bits above the field width are truncated in ltc2992_write_reg(). Fix by clamping negative values to zero, clamping positive values to the rounded hardware-representable maximum (the value returned by the read path for a full-scale register) to prevent intermediate overflow, and clamping the converted register value to the hardware field width before writing. The existing conversion formula and rounding behavior are preserved. In the power write path, cancel the factor of 1000 from both the numerator (r_sense_uohm * 1000) and the denominator (VADC_UV_LSB * IADC_NANOV_LSB) to also eliminate a u32 overflow of r_sense_uohm * 1000 when r_sense_uohm exceeds about 4.29 ohms. Fixes: b0bd407e94b03 ("hwmon: (ltc2992) Add support") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Link: https://lore.kernel.org/r/20260416215904.101969-2-sanman.pradhan@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit c5a9c863a2aa38e9c337b3cd9a03460045869662 Author: Hongling Zeng Date: Sun May 3 12:17:44 2026 +0800 parisc: Fix IRQ leak in LASI driver commit 37b0dc5e279f35036fb638d1e187197b6c05a76d upstream. When request_irq() succeeds but gsc_common_setup() fails later, the IRQ is never released. Fix this by adding proper error handling with goto labels to ensure resources are released in LIFO order. Detected by Smatch: drivers/parisc/lasi.c:216 lasi_init_chip() warn: 'lasi->gsc_irq.irq' from request_irq() not released on lines: 207. Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202604180957.4QdAIxP6-lkp@intel.com/ Signed-off-by: Hongling Zeng Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 9855e063e063158cc5bded576382599dc3133202 Author: Pavitra Jha Date: Fri May 1 07:07:12 2026 -0400 net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler commit 0e7c074cfcd9bd93765505f9eb8b42f03ed2a744 upstream. t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path. Fixes: da45d2566a1d ("net: wwan: t7xx: Add control port") Cc: stable@vger.kernel.org Signed-off-by: Pavitra Jha Link: https://patch.msgid.link/20260501110713.145563-1-jhapavitra98@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3abc8983b2bae3f487f77d9da5527d7d6b210d46 Author: Nan Li Date: Fri May 1 09:08:44 2026 +0800 net/rds: handle zerocopy send cleanup before the message is queued commit 44b550d88b267320459d518c0743a241ab2108fa upstream. A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path. Fixes: 0cebaccef3ac ("rds: zerocopy Tx support.") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Co-developed-by: Xiao Liu Signed-off-by: Xiao Liu Signed-off-by: Nan Li Signed-off-by: Ren Wei Reviewed-by: Allison Henderson Link: https://patch.msgid.link/d2ea98a6313d5467bac00f7c9fef8c7acddb9258.1777550074.git.tonanli66@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 311fdd26eb4443d43b909cc67a10f3a5fd1b21b2 Author: Maoyi Xie Date: Thu Apr 30 18:33:18 2026 +0800 ip6_gre: Use cached t->net in ip6erspan_changelink(). commit 1d324c2f43f70c965f25c58cc3611c779adbe47e upstream. After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape. Fixes: 2d665034f239 ("net: ip6_gre: Fix ip6erspan hlen calculation") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260430103318.3206018-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit f6e656f7cea16b638675a2ab7d7e4cf2516c5eb0 Author: Jiawen Wu Date: Wed Apr 29 16:37:42 2026 +0800 net: libwx: fix VF illegal register access commit 694de316f607fe2473d52ca0707e3918e72c1562 upstream. Register WX_CFG_PORT_ST is a PF restricted register. When a VF is initialized, attempting to read this register triggers an illegal register access, which lead to a system hang. When the device is VF, the bus function ID can be obtained directly from the PCI_FUNC(pdev->devfn). Fixes: a04ea57aae37 ("net: libwx: fix device bus LAN ID") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu Link: https://patch.msgid.link/4D1F4452D21DE107+20260429083743.88961-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 593dd7e6c890d8e4ca21b3e2f796b7cb8e8da983 Author: SeungJu Cheon Date: Sun Apr 26 20:12:39 2026 +0900 sound: ua101: fix division by zero at probe commit d1f73f169c1014463b5060e3f60813e13ddc7b87 upstream. Add a missing sanity check for bNrChannels in detect_usb_format() to prevent a division by zero in playback_urb_complete() and capture_urb_complete(). USB core does not validate class-specific descriptor fields such as bNrChannels, so drivers must verify them before use. If a device provides bNrChannels = 0, frame_bytes becomes zero and is later used as a divisor in the URB completion handlers, leading to a kernel crash. Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Cc: stable@vger.kernel.org Signed-off-by: SeungJu Cheon Link: https://patch.msgid.link/20260426111239.103296-1-suunj1331@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit c5b1b92ab7eff1a6e8c507ddde6fd02fabd0cfa8 Author: Kai Zen Date: Thu Apr 30 18:26:48 2026 +0300 net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo commit 4b9e327991815e128ad3af75c3a04630a63ce3e0 upstream. rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack without initialisation: struct ifla_vf_broadcast vf_broadcast; The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; }; The function then copies dev->broadcast into it using dev->addr_len as the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len); On Ethernet devices (the overwhelming majority of SR-IOV NICs) dev->addr_len is 6, so only the first 6 bytes of broadcast[] are written. The remaining 26 bytes retain whatever was previously on the kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) leaking up to 26 bytes of uninitialised kernel stack per VF per RTM_GETLINK request, repeatable. The other vf_* structs in the same function are explicitly zeroed for exactly this reason - see the memset() calls for ivi, vf_vlan_info, node_guid and port_guid a few lines above. vf_broadcast was simply missed when it was added. Reachability: any unprivileged local process can open AF_NETLINK / NETLINK_ROUTE without capabilities and send RTM_GETLINK with an IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per VF per request. Stack residue at this call site can include return addresses and transient sensitive data; KASAN with stack instrumentation, or KMSAN, will flag the nla_put() when reproduced. Zero the on-stack struct before the partial memcpy, matching the existing pattern used for the other vf_* structs in the same function. Fixes: 75345f888f70 ("ipoib: show VF broadcast address") Cc: stable@vger.kernel.org Signed-off-by: Kai Zen Link: https://patch.msgid.link/3c506e8f936e52b57620269b55c348af05d413a2.1777557228.git.kai.aizen.dev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5cc080af7031df35a3ee61515878e99d1d0e4ec2 Author: Huacai Chen Date: Mon May 4 09:00:01 2026 +0800 LoongArch: Fix SYM_SIGFUNC_START definition for 32BIT commit 98b8aebb14fdc0133939fd8fe07d0d98333dc976 upstream. The SYM_SIGFUNC_START definition should match sigcontext that the length of GPRs are 8 bytes for both 32BIT and 64BIT. So replace SZREG with 8 to fix it. Cc: stable@vger.kernel.org Fixes: e4878c37f6679fde ("LoongArch: vDSO: Emit GNU_EH_FRAME correctly") Suggested-by: Xi Ruoyao Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit ca18c180b053f6ce80394322b314ac721c316af7 Author: Tudor Ambarus Date: Fri Apr 17 15:24:39 2026 +0000 mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() commit e47029b977e747cb3a9174308fd55762cce70147 upstream. Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array. Cc: stable@vger.kernel.org Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs") Closes: https://sashiko.dev/#/patchset/20260417-die-erase-fix-v2-1-73bb7004ebad%40infineon.com [1] Signed-off-by: Tudor Ambarus Reviewed-by: Takahiro Kuwano Reviewed-by: Michael Walle Reviewed-by: Pratyush Yadav Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 9812d79deecf70e51d2813668cbd86b99f4aa187 Author: Fuad Tabba Date: Fri Apr 24 09:49:06 2026 +0100 KVM: arm64: Fix kvm_vcpu_initialized() macro parameter commit d89fdda7dd8a488f922e1175e6782f781ba8a23b upstream. The macro is defined with parameter 'v' but the body references the literal token 'vcpu' instead, causing it to silently operate on whatever 'vcpu' resolves to in the caller's scope rather than the value passed by the caller. All current call sites happen to use a variable named 'vcpu', so the bug is latent. Fixes: e016333745c7 ("KVM: arm64: Only reset vCPU-scoped feature ID regs once") Signed-off-by: Fuad Tabba Link: https://patch.msgid.link/20260424084908.370776-5-tabba@google.com Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit f130790f1acc8399f32652846c875a251efd040f Author: Miklos Szeredi Date: Fri Apr 10 16:49:47 2026 +0200 fanotify: fix false positive on permission events commit 7746e3bd4cc19b5092e00d32d676e329bfcb6900 upstream. fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group. CC: stable@vger.kernel.org Fixes: abc77577a669 ("fsnotify: Provide framework for dropping SRCU lock in ->handle_event") Signed-off-by: Miklos Szeredi Link: https://patch.msgid.link/20260410144950.156160-1-mszeredi@redhat.com Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 73661546bed9d51aacf663ffda22f961b1f472bf Author: Johan Hovold Date: Fri Apr 24 12:49:10 2026 +0200 staging: vme_user: fix root device leak on init failure commit 32c91e8ee039777d0b95b914633fc6a42607959c upstream. Make sure to deregister and free the root device in case module initialisation fails. Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver") Cc: stable@vger.kernel.org # 4.9 Cc: Martyn Welch Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260424104910.2619349-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 323a258f4b1916b5a3098618e036e033b2f2317f Author: Johan Hovold Date: Fri Apr 10 11:49:25 2026 +0200 spi: s3c64xx: fix NULL-deref on driver unbind commit 45daacbead8a009844bd5dba6cfa731332184d17 upstream. A change moving DMA channel allocation from probe() back to s3c64xx_spi_prepare_transfer() failed to remove the corresponding deallocation from remove(). Drop the bogus DMA channel release from remove() to avoid triggering a NULL-pointer dereference on driver unbind. This issue was flagged by Sashiko when reviewing a controller deregistration fix. Fixes: f52b03c70744 ("spi: s3c64xx: requests spi-dma channel only during data transfer") Cc: stable@vger.kernel.org # 6.0 Cc: Adithya K V Link: https://sashiko.dev/#/patchset/20260410081757.503099-1-johan%40kernel.org Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410094925.518343-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 0ea46b00482ea5a6d07002272b2caf64faee965f Author: Johan Hovold Date: Fri Apr 10 10:17:55 2026 +0200 spi: zynqmp-gqspi: fix controller deregistration commit 6895fc4faafc9082e15e4e624b23dd5f0c98feb5 upstream. Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: dfe11a11d523 ("spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller") Cc: stable@vger.kernel.org # 4.2: 64640f6c972e Cc: stable@vger.kernel.org # 4.2 Cc: Ranjit Waghmode Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-26-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit a786ce0adbef2f13166f06fc4d4afdce7ef22aa6 Author: Johan Hovold Date: Fri Apr 10 10:17:49 2026 +0200 spi: sun6i: fix controller deregistration commit d874a1c33aee0d88fb4ba2f8aeadaa9f1965209a upstream. Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: 3558fe900e8a ("spi: sunxi: Add Allwinner A31 SPI controller driver") Cc: stable@vger.kernel.org # 3.15 Cc: Maxime Ripard Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-20-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ae60afa5d0c560216cad21eaa145b78455d23eb9 Author: Johan Hovold Date: Fri Apr 10 10:17:53 2026 +0200 spi: ti-qspi: fix controller deregistration commit 0c18a1bacbb1d8b8aa34d3d004a2cb8226c8b1ea upstream. Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Note that the controller is suspended before disabling and releasing resources since commit 3ac066e2227c ("spi: spi-ti-qspi: Suspend the queue before removing the device") which avoids issues like unclocked accesses but prevents SPI device drivers from doing I/O during deregistration. Fixes: 3b3a80019ff1 ("spi: ti-qspi: one only one interrupt handler") Cc: stable@vger.kernel.org # 3.13 Cc: Sebastian Andrzej Siewior Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-24-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 73a5d71b7fc6db665ed89b2c55751a77f87e1c53 Author: Johan Hovold Date: Fri Apr 10 10:17:48 2026 +0200 spi: sun4i: fix controller deregistration commit 42108a2f03e0fdeabe9d02d085bdb058baa1189f upstream. Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: b5f6517948cc ("spi: sunxi: Add Allwinner A10 SPI controller driver") Cc: stable@vger.kernel.org # 3.15 Cc: Maxime Ripard Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-19-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ceb18ebc949aec1e3b8d09f94c0556b422ee4b9d Author: Johan Hovold Date: Fri Apr 10 10:17:50 2026 +0200 spi: syncuacer: fix controller deregistration commit 75d849c3452e9611de031db45b3149ba9a99035f upstream. Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform") Cc: stable@vger.kernel.org # 5.3 Cc: Masahisa Kojima Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-21-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit c88c185ae0a1067823661b220aeea613df2c127b Author: Siwei Zhang Date: Wed Apr 15 16:51:36 2026 -0400 Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_state_change_cb() commit 2ff1a41a912de8517b4482e946dd951b7d80edbf upstream. Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). Fixes: 89bc500e41fc ("Bluetooth: Add state tracking to struct l2cap_chan") Cc: stable@kernel.org Signed-off-by: Siwei Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit bc3bb9f40da8e53896abc2d29c6d0c6686fe4ab9 Author: Siwei Zhang Date: Wed Apr 15 16:49:59 2026 -0400 Bluetooth: L2CAP: Fix null-ptr-deref in l2cap_sock_new_connection_cb() commit 0a120d96166301d7a95be75b52f843837dbd1219 upstream. Add the same NULL guard already present in l2cap_sock_resume_cb() and l2cap_sock_ready_cb(). Fixes: 80808e431e1e ("Bluetooth: Add l2cap_chan_ops abstraction") Cc: stable@kernel.org Signed-off-by: Siwei Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 22559ad7654f61727fc270ee4893da9f4b70cf17 Author: Luiz Augusto von Dentz Date: Fri Apr 10 15:29:52 2026 -0400 Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt commit 5ddb8014261137cadaf83ab5617a588d80a22586 upstream. hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes") Cc: stable@vger.kernel.org Signed-off-by: ZhiTao Ou Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit c411cf1bfde951cfa821809cf4020ba177f76e0c Author: Tristan Madani Date: Tue Apr 21 11:14:54 2026 +0000 Bluetooth: btmtk: validate WMT event SKB length before struct access commit 634a4408c0615c523cf7531790f4f14a422b9206 upstream. btmtk_usb_hci_wmt_sync() casts the WMT event response SKB data to struct btmtk_hci_wmt_evt (7 bytes) and struct btmtk_hci_wmt_evt_funcc (9 bytes) without first checking that the SKB contains enough data. A short firmware response causes out-of-bounds reads from SKB tailroom. Use skb_pull_data() to validate and advance past the base WMT event header. For the FUNC_CTRL case, pull the additional status field bytes before accessing them. Fixes: d019930b0049 ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 2c1143564c71e7497b42d8360a8379ccbb011d3c Author: Michael Bommarito Date: Tue Apr 21 13:08:45 2026 -0400 Bluetooth: virtio_bt: validate rx pkt_type header length commit daf23014e5d975e72ea9c02b5160d3fcf070ea47 upstream. virtbt_rx_handle() reads the leading pkt_type byte from the RX skb and forwards the remainder to hci_recv_frame() for every event/ACL/SCO/ISO type, without checking that the remaining payload is at least the fixed HCI header for that type. After the preceding patch bounds the backend-supplied used.len to [1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches hci_recv_frame() with skb->len already pulled to 0. If the byte happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification fast-path in hci_dev_classify_pkt_type() dereferences hci_acl_hdr(skb)->handle whenever the HCI device has an active CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of uninitialized RX-buffer data. The same hazard exists for every packet type the driver accepts because none of the switch cases in virtbt_rx_handle() check skb->len against the per-type minimum HCI header size before handing the frame to the core. After stripping pkt_type, require skb->len to cover the fixed header size for the selected type (event 2, ACL 4, SCO 3, ISO 4) before calling hci_recv_frame(); drop ratelimited otherwise. Unknown pkt_type values still take the original kfree_skb() default path. Use bt_dev_err_ratelimited() because both the length and pkt_type values come from an untrusted backend that can otherwise flood the kernel log. Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 6c1730099a6fc18b183bd6c1adad3b54adcaeda9 Author: Michael Bommarito Date: Tue Apr 21 13:08:44 2026 -0400 Bluetooth: virtio_bt: clamp rx length before skb_put commit 21bd244b6de5d2fe1063c23acc93fbdd2b20d112 upstream. virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length. Fixes: 160fbcf3bfb9 ("Bluetooth: virtio_bt: Use skb_put to set length") Cc: stable@vger.kernel.org Cc: Soenke Huster Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 088a31cf522d1b4cc90386c5c2710a31ddeb836d Author: Tao Cui Date: Mon May 4 09:00:38 2026 +0800 LoongArch: KVM: Fix missing EMULATE_FAIL in kvm_emu_mmio_read() commit f26faae96c411a70641e4d21b759475caa6122d5 upstream. In the ldptr (0x24...0x27) opcode decoding path, the default case only breaks out but without setting "ret" value to EMULATE_FAIL. This leaves run->mmio.len uninitialized (stale from a previous MMIO operation) while "ret" value remains EMULATE_DO_MMIO, causing the code to proceed with an incorrect MMIO length. Add "ret = EMULATE_FAIL" to match the other default branches in the same function (e.g. the 0x28...0x2e and 0x38 cases). Cc: stable@vger.kernel.org Reviewed-by: Bibo Mao Signed-off-by: Tao Cui Signed-off-by: Huacai Chen Signed-off-by: Greg Kroah-Hartman commit 7719fda876b6a9c8c4bcbdd5ae054eb4086363bb Author: Stephen Smalley Date: Tue May 5 08:49:49 2026 -0400 selinux: prune /sys/fs/selinux/disable commit 19cfa0099024bb9cd40f6d950caa7f47ff8e77f6 upstream. Commit f22f9aaf6c3d ("selinux: remove the runtime disable functionality") removed the underlying SELinux runtime disable functionality but left everything else intact and started logging an error message to warn any residual users. Prune it to just log an error message once and to return count (i.e. all bytes written successfully) to avoid breaking userspace. This also fixes a local DoS from logspam. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 6509d775d86e9ac4d9f831c7fb05c011f6a4c11d Author: Stephen Smalley Date: Thu Apr 30 14:36:52 2026 -0400 selinux: shrink critical section in sel_write_load() commit 868f31e4061eca8c3cd607d79d954d5e54f204aa upstream. Currently sel_write_load() takes the policy mutex earlier than necessary. Move the taking of the mutex later. This avoids holding it unnecessarily across the vmalloc() and copy_from_user() of the policy data. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 3bdbb95cf2c0786d68cd54d375f2e361b7fd667e Author: David Windsor Date: Sun Apr 26 19:23:49 2026 -0400 selinux: don't reserve xattr slot when we won't fill it commit 1e5a8eed7821e7a43a31b4c1b3675a91be6bc6f6 upstream. Move lsm_get_xattr_slot() below the SBLABEL_MNT check so we don't leave a NULL-named slot in the array when returning -EOPNOTSUPP; filesystem initxattrs() callbacks stop iterating at the first NULL ->name, silently dropping xattrs installed by later LSMs. Cc: stable@vger.kernel.org Signed-off-by: David Windsor Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 729899a2aa8bda7844be0cdcd3b470f11b912eda Author: Michael Bommarito Date: Sun Apr 19 18:35:42 2026 -0400 xfrm: ah: account for ESN high bits in async callbacks commit ec54093e6a8f87e800bb6aa15eb7fc1e33faa524 upstream. AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. Fixes: d4d573d0334d ("{IPv4,xfrm} Add ESN support for AH egress part") Fixes: d8b2a8600b0e ("{IPv4,xfrm} Add ESN support for AH ingress part") Fixes: 26dd70c3fad3 ("{IPv6,xfrm} Add ESN support for AH egress part") Fixes: 8d6da6f32557 ("{IPv6,xfrm} Add ESN support for AH ingress part") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5-4 Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 554c9b090c8ac5b1c5c507f4badf8d5d0c9c6e13 Author: Yilin Zhu Date: Sun Apr 12 13:07:54 2026 +0800 ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() commit bc0fcb9823cd0894934cf968b525c575833d7078 upstream. xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. Fixes: 0146dca70b87 ("xfrm: add support for UDPv6 encapsulation of ESP") Cc: stable@kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Ruide Cao Signed-off-by: Yilin Zhu Signed-off-by: Ren Wei Reviewed-by: Simon Horman Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 26edb0a3c99f9d958c212be68b21f1221614dcf0 Author: Michal Kosiorek Date: Wed Apr 29 10:54:51 2026 +0200 xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete commit 14acf9652e5690de3c7486c6db5fb8dafd0a32a3 upstream. KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle Fixes: fe9f1d8779cb ("xfrm: add state hashtable keyed by seq") Fixes: 7b4dc3600e48 ("[XFRM]: Do not add a state whose SPI is zero to the SPI hash.") Reported-by: Michal Kosiorek Tested-by: Michal Kosiorek Cc: stable@vger.kernel.org Signed-off-by: Michal Kosiorek Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 3bf7fcfa4d2713e91400b3aa2e5fb77a5c341723 Author: Ruijie Li Date: Wed Apr 29 00:41:43 2026 +0800 xfrm: provide message size for XFRM_MSG_MAPPING commit 28465227c80fe417b4013c432be1f3737cb9f9a3 upstream. The compat 64=>32 translation path handles XFRM_MSG_MAPPING, but xfrm_msg_min[] does not provide the native payload size for this message type. Add the missing XFRM_MSG_MAPPING entry so compat translation can size and translate mapping notifications correctly. Fixes: 5461fc0c8d9f ("xfrm/compat: Add 64=>32-bit messages translator") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruijie Li Signed-off-by: Ren Wei Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 964eeb5151f707074e33bad144e8876cf45c1a14 Author: Sourabh Jain Date: Tue Apr 7 18:13:44 2026 +0530 powerpc/kdump: fix KASAN sanitization flag for core_$(BITS).o commit b3a97f9484080c6e71db9e803e3cc1bb372a9bc7 upstream. KASAN instrumentation is intended to be disabled for the kexec core code, but the existing Makefile entry misses the object suffix. As a result, the flag is not applied correctly to core_$(BITS).o. So when KASAN is enabled, kexec_copy_flush and copy_segments in kexec/core_64.c are instrumented, which can result in accesses to shadow memory via normal address translation paths. Since these run with the MMU disabled, such accesses may trigger page faults (bad_page_fault) that cannot be handled in the kdump path, ultimately causing a hang and preventing the kdump kernel from booting. The same is true for kexec as well, since the same functions are used there. Update the entry to include the “.o” suffix so that KASAN instrumentation is properly disabled for this object file. Fixes: 2ab2d5794f14 ("powerpc/kasan: Disable address sanitization in kexec paths") Reported-by: Venkat Rao Bagalkote Closes: https://lore.kernel.org/all/1dee8891-8bcc-46b4-93f3-fc3a774abd5b@linux.ibm.com/ Cc: stable@vger.kernel.org Reviewed-by: Ritesh Harjani (IBM) Tested-by: Venkat Rao Bagalkote Acked-by: Mahesh Salgaonkar Reviewed-by: Aboorva Devarajan Tested-by: Aboorva Devarajan Signed-off-by: Sourabh Jain Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260407124349.1698552-1-sourabhjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit 27efa96bae439f05fe45e69363bda950baeada1c Author: Cássio Gabriel Date: Sun May 3 21:55:52 2026 -0300 ALSA: firewire-tascam: Do not drop unread control events commit 0749daa8eb5ab90334aaad3b0671efd7150d43b1 upstream. tscm_hwdep_read_queue() copies as many queued control events as fit in the userspace buffer. When the buffer is smaller than the current contiguous queue segment, length is rounded down to the number of bytes that can be copied. However, after copying that shortened length, the code advances pull_pos to the original tail_pos, marking the whole contiguous segment as consumed. Any events between the copied portion and tail_pos are lost. Limit tail_pos to the position after the entries actually copied before updating pull_pos. When the whole segment fits, this is equivalent to the old tail_pos update; when the buffer is smaller, the remaining events stay queued for the next read. Fixes: a8c0d13267a4 ("ALSA: firewire-tascam: notify events of change of state for userspace applications") Cc: stable@vger.kernel.org Suggested-by: Takashi Sakamoto Signed-off-by: Cássio Gabriel Reviewed-by: Takashi Sakamoto Co-developed-by: Takashi Sakamoto Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260503-alsa-firewire-tascam-read-queue-v2-1-126c6efd7642@gmail.com Signed-off-by: Greg Kroah-Hartman commit 49f9d048845be874df7997e4b1ce662de450c4b6 Author: Takashi Iwai Date: Fri Apr 24 13:21:55 2026 +0200 ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger commit 901ac0ff15edf9503162e2cf6579bd11a30f1ed4 upstream. Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll(). Reported-and-tested-by: Jaeyoung Chung Closes: https://lore.kernel.org/20260423145330.210035-1-jjy600901@snu.ac.kr Cc: Link: https://patch.msgid.link/20260424112205.123703-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit be2c1d825f54277472c87019e82013ac534ddc4c Author: Felix Gu Date: Tue Apr 7 21:21:22 2026 +0800 usb: ulpi: fix memory leak on ulpi_register() error paths commit 0b9fcab1b8608d429e5f239afb197de928d4de7d upstream. Commit 01af542392b5 ("usb: ulpi: fix double free in ulpi_register_interface() error path") removed kfree(ulpi) from ulpi_register_interface() to fix a double-free when device_register() fails. But when ulpi_of_register() or ulpi_read_id() fail before device_register() is called, the ulpi allocation is leaked. Add kfree(ulpi) on both error paths to properly clean up the allocation. Fixes: 01af542392b5 ("usb: ulpi: fix double free in ulpi_register_interface() error path") Cc: stable Signed-off-by: Felix Gu Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260407-ulpi-v1-1-f3fafe53f7b2@gmail.com Signed-off-by: Greg Kroah-Hartman commit 0a4f1ca3c8f119874f9e1c393e293ff753b5943d Author: Fabio Porcedda Date: Mon Apr 27 11:17:46 2026 +0200 USB: serial: option: add Telit Cinterion LE910Cx compositions commit 100201d349edd226ca3470c894c92dccc67ee7a8 upstream. Add the following Telit Cinterion LE910Cx compositions: 0x1251: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP) T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=108 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1251 Rev=03.18 S: Manufacturer=Android S: Product=LE910C1-EU S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms 0x1253: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP) T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=121 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1253 Rev=03.18 S: Manufacturer=Android S: Product=LE910C1-EU S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms 0x1254: tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1254 Rev=03.18 S: Manufacturer=Android S: Product=LE910C1-EU S: SerialNumber=0123456789ABCDEF C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms 0x1255: tty (AT/NMEA) + tty (AT) + tty (AT) + tty (SAP) T: Bus=01 Lev=01 Prnt=21 Port=06 Cnt=01 Dev#=123 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1255 Rev=03.18 S: Manufacturer=Android S: Product=LE910C1-EU S: SerialNumber=0123456789ABCDEF C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f9dd48b638e262074f9bebd4f04b73688e47ebd6 Author: Aaro Koskinen Date: Mon Apr 13 21:49:12 2026 +0300 USB: omap_udc: DMA: Don't enable burst 4 mode commit 3f91484f6c13c434bd573ca6b6779c26adb0ddab upstream. Commit 65111084c63d7 ("USB: more omap_udc updates (dma and omap1710)") added setting for DMA burst 4 mode. But I think this should be undone for two reasons: - It breaks DMA on 15xx boards - transfers just silently stall. - On newer OMAP1 boards, like Nokia 770 (omap1710), there is no measurable performance impact when testing TCP throughput with g_ether with large 15000 byte MTU size. It's also worth noting that when the original change was made, the OMAP_DMA_DATA_BURST_4 handling in arch/arm/plat-omap/dma.c was broken, and actually resulted in the same as the OMAP_DMA_DATA_BURST_DIS i.e. burst disabled. This was fixed not until a couple kernel releases later in an unrelated commit 1a8bfa1eb998a ("[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2"). So based on this it seems there was never really a very good reason to enable this burst mode in omap_udc, so remove it now to allow 15xx DMA to work again (it provides 2x throughput compared to PIO mode). Fixes: 65111084c63d ("[PATCH] USB: more omap_udc updates (dma and omap1710)") Cc: stable Signed-off-by: Aaro Koskinen Link: https://patch.msgid.link/ad06qHLclWHeSGnV@darkstar.musicnaut.iki.fi Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 127f02190010142821a569d21c75a49e08a5d36e Author: Cássio Gabriel Date: Fri Apr 24 18:50:10 2026 -0300 ALSA: usb-audio: Fix UAC3 cluster descriptor size check commit 26265dd69da32d88a88d21987853cec899d9e21f upstream. The UAC3 cluster descriptor length check in snd_usb_get_audioformat_uac3()was added to make sure that the buffer is large enough for a struct uac3_cluster_header_descriptor before the returned data is cast and used. However, the check uses sizeof(cluster), where cluster is a pointer, not the size of the descriptor header. This makes the validation depend on the architecture pointer size and does not match the intended object size. Check against sizeof(*cluster) instead. Fixes: fb4e2a6e8f28 ("ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260424-alsa-usb-uac3-cluster-size-v1-1-99a5808898a3@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4e0ee232ebe3df04874125d7c7f3e6c25ea5483d Author: Takashi Iwai Date: Mon Apr 27 17:22:15 2026 +0200 ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3() commit 6e7247d8f5fefeceb0bb9cc80a5388a636b219cd upstream. The convert_chmap_v3() has a loop with its increment size of cs_desc->wLength, but we forgot to validate cs_desc->wLength itself, which may lead to potential endless loop by a malformed descriptor. Add a proper size check to abort the loop for plugging the hole. Fixes: ecfd41166b72 ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors") Cc: Link: https://patch.msgid.link/20260427152224.15276-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8269789b7a5358ac326c17ab74fdefd9fbb2ed89 Author: Cássio Gabriel Date: Mon May 4 11:08:45 2026 -0300 ALSA: usb-audio: midi2: Restart output URBs on resume commit f3c57c9c2a49a21d784b7c04a2c883bffc070659 upstream. USB MIDI 2.0 suspend saves the endpoint running state, clears it and kills all endpoint URBs. Resume restores the running state, but only restarts input endpoints. For a running output endpoint, this leaves the endpoint marked running with an empty URB queue. Output transfer progress depends on either the rawmidi trigger path starting the queue or an output completion refilling it. After suspend there is no completion left, and output data that remains queued in the raw UMP or legacy rawmidi buffer can stay stalled until userspace happens to trigger the stream again. Restore the saved state with atomic accessors, keep input endpoints restarted as before, and restart output endpoints that were running before suspend. Clear the saved suspend state after restoring it. Fixes: ff49d1df79ae ("ALSA: usb-audio: USB MIDI 2.0 UMP support") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260504-usb-midi2-output-resume-v1-1-c089cc8ad3c6@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a502b997668401a6821501fc98b7f9220f9b6ff2 Author: Greg Kroah-Hartman Date: Mon Apr 20 18:11:04 2026 +0200 usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl commit b38e53cbfb9d84732e5984fbd73e128d592415c5 upstream. Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening. Cc: Pete Zaitcev Assisted-by: gkh_clanker_t1000 Cc: stable Link: https://patch.msgid.link/2026042011-shredder-savage-48c6@gregkh Signed-off-by: Greg Kroah-Hartman commit 6d8142141c942c0d8e79343cffda9c44bb1f3f4f Author: Greg Kroah-Hartman Date: Mon Apr 20 18:11:03 2026 +0200 usb: usblp: fix heap leak in IEEE 1284 device ID via short response commit 7a400c6fe3617e31e690e3f7ca37bb335e0498f3 upstream. usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device. Cc: Pete Zaitcev Assisted-by: gkh_clanker_t1000 Cc: stable Link: https://patch.msgid.link/2026042002-unicorn-greedily-3c63@gregkh Signed-off-by: Greg Kroah-Hartman commit d16827cb1d3936f7627d0da6044483f743ebde03 Author: Marek Szyprowski Date: Thu Apr 16 11:33:39 2026 +0200 wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task commit c623b63580880cc742255eaed3d79804c1b91143 upstream. Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). Cc: stable@vger.kernel.org Fixes: 373c83a801f1 ("brcmfmac: stop watchdog before detach and free everything") Fixes: a9ffda88be74 ("brcm80211: fmac: abstract bus_stop interface function pointer") Signed-off-by: Marek Szyprowski Acked-by: Arend van Spriel Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 1e9e55cf66f0fa4799f4d86ef3aaba8e606b5c14 Author: Tristan Madani Date: Fri Apr 17 11:11:44 2026 +0000 wifi: b43: enforce bounds check on firmware key index in b43_rx() commit 1f4f78bf8549e6ac4f04fba4176854f3a6e0c332 upstream. The firmware-controlled key index in b43_rx() can exceed the dev->key[] array size (58 entries). The existing B43_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read. Make the B43_WARN_ON check enforcing by dropping the frame when the firmware returns an invalid key index. Suggested-by: Jonas Gorski Acked-by: Michael Büsch Fixes: e4d6b7951812 ("[B43]: add mac80211-based driver for modern BCM43xx devices") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Link: https://patch.msgid.link/20260417111145.2694196-1-tristmd@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit afcbaed89cdc1a001b43270cbf5394bb4804270a Author: Johannes Berg Date: Tue May 5 15:15:34 2026 +0200 wifi: mac80211: remove station if connection prep fails commit 283fc9e44ff5b5ac967439b4951b80bd4299f4e4 upstream. If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs. Cc: stable@vger.kernel.org Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20260505151533.c4e52deb06ad.Iafe56cec7de8512626169496b134bce3a6c17010@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit d6869537013b1f21b292342752d97868b79b5934 Author: Jiri Slaby (SUSE) Date: Tue Dec 9 11:04:59 2025 +0100 wifi: ath5k: do not access array OOB commit d748603f12baff112caa3ab7d39f50100f010dbd upstream. Vincent reports: > The ath5k driver seems to do an array-index-out-of-bounds access as > shown by the UBSAN kernel message: > UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20 > index 4 is out of range for type 'ieee80211_tx_rate [4]' > ... > Call Trace: > > dump_stack_lvl+0x5d/0x80 > ubsan_epilogue+0x5/0x2b > __ubsan_handle_out_of_bounds.cold+0x46/0x4b > ath5k_tasklet_tx+0x4e0/0x560 [ath5k] > tasklet_action_common+0xb5/0x1c0 It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1; with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; while the size is: #define IEEE80211_TX_MAX_RATES 4 is indeed bogus. Set this 'idx = -1' sentinel only if the array index is less than the array size. As mac80211 will not look at rates beyond the size (IEEE80211_TX_MAX_RATES). Note: The effect of the OOB write is negligible. It just overwrites the next member of info->status, i.e. ack_signal. Signed-off-by: Jiri Slaby (SUSE) Reported-by: Vincent Danjean Link: https://lore.kernel.org/all/aQYUkIaT87ccDCin@eldamar.lan Closes: https://bugs.debian.org/1119093 Fixes: 6d7b97b23e11 ("ath5k: fix tx status reporting issues") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251209100459.2253198-1-jirislaby@kernel.org Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman commit 887ece6c23b49d02a6678e7a8d5ad213d75883ce Author: Benjamin Berg Date: Tue May 5 15:15:40 2026 +0200 wifi: mac80211: use safe list iteration in radar detect work commit ac8eb3e18f41e2cc8492cc1d358bcb786c850270 upstream. The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error. Cc: stable@vger.kernel.org Fixes: bca8bc0399ac ("wifi: mac80211: handle ieee80211_radar_detected() for MLO") Signed-off-by: Benjamin Berg Link: https://patch.msgid.link/20260505151539.236d63a1b736.I35dbb9e96a2d4a480be208770fdd99ba3b817b79@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 16d9f674c619838bdeae42abc0929c9c5477ea1f Author: Jeongjun Park Date: Thu Apr 23 02:38:46 2026 +0900 wifi: rsi: fix kthread lifetime race between self-exit and external-stop commit db57a1aa54ff68669781976e4edb045e09e2b65b upstream. RSI driver use both self-exit(kthread_complete_and_exit) and external-stop (kthread_stop) when killing a kthread. Generally, kthread_stop() is called first, and in this case, no particular issues occur. However, in rare instances where kthread_complete_and_exit() is called first and then kthread_stop() is called, a UAF occurs because the kthread object, which has already exited and been freed, is accessed again. Therefore, to prevent this with minimal modification, you must remove kthread_stop() and change the code to wait until the self-exit operation is completed. Cc: Reported-by: syzbot+5de83f57cd8531f55596@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69e5d03b.a00a0220.1bd0ca.0064.GAE@google.com/ Fixes: 4c62764d0fc2 ("rsi: improve kernel thread handling to fix kernel panic") Signed-off-by: Jeongjun Park Link: https://patch.msgid.link/20260422173846.37640-1-aha310510@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 1739fc31b4de06c5c78ce0741182770fb079091e Author: Catherine Date: Fri Apr 24 21:14:36 2026 +0800 wifi: mac80211: drop stray 'static' from fast-RX rx_result commit 7a5b81e0c87a075afd572f659d8eb68c9c4cd2ba upstream. ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result. Fixes: 3468e1e0c639 ("wifi: mac80211: add mesh fast-rx support") Cc: stable@vger.kernel.org Signed-off-by: Catherine Link: https://patch.msgid.link/20260424131435.83212-2-enderaoelyther@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 6ee946077607d7783ae6709a899213fc4fe08f35 Author: Tristan Madani Date: Fri Apr 17 11:11:45 2026 +0000 wifi: b43legacy: enforce bounds check on firmware key index in RX path commit a035766f970bde2d4298346a31a80685be5c0205 upstream. Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices. Fixes: 75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Link: https://patch.msgid.link/20260417111145.2694196-2-tristmd@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 5c7ba690205c9b960da65534ed9f6c6d5776cbdd Author: Quan Zhou Date: Fri Jan 23 10:16:25 2026 +0800 wifi: mt76: mt7921: fix ROC abort flow interruption in mt7921_roc_work commit fdfa39f9f4fbae532b162da913a67b2410caf38f upstream. The mt7921_set_roc API may be executed concurrently with mt7921_roc_work, specifically between the following code paths: - The check and clear of MT76_STATE_ROC in mt7921_roc_work: if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state)) return; - The execution of ieee80211_iterate_active_interfaces. This race condition can interrupt the ROC abort flow, resulting in the ROC process failing to abort as expected. To address this defect, the modification of MT76_STATE_ROC is now protected by mt792x_mutex_acquire(phy->dev). This ensures that changes to the ROC state are properly synchronized, preventing race conditions and ensuring the ROC abort flow is not interrupted. Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support") Cc: stable@vger.kernel.org Signed-off-by: Quan Zhou Reviewed-by: Sean Wang Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit 90cc573fd2f46ddbc2c329e7814b5ba3deb7b939 Author: Leon Yen Date: Thu Oct 9 10:01:58 2025 +0800 wifi: mt76: mt7921: fix a potential clc buffer length underflow commit 5373f8b19e568b5c217832b9bbef165bd2b2df14 upstream. The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure. Cc: stable@vger.kernel.org Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC") Signed-off-by: Leon Yen Signed-off-by: Ming Yen Hsieh Link: https://patch.msgid.link/20251009020158.1923429-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit 8ee081ad05e97e0ac4f81ba98acd1c433a44143e Author: Ming Yen Hsieh Date: Mon Sep 8 15:25:26 2025 +0800 wifi: mt76: mt7925: fix incorrect length field in txpower command commit ccb186326bb6b7f20d77982f855568e7087ad0d7 upstream. Set `tx_power_tlv->len` to `msg_len` instead of `sizeof(*tx_power_tlv)` to ensure the correct message length is sent to firmware. Cc: stable@vger.kernel.org Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Signed-off-by: Ming Yen Hsieh Link: https://patch.msgid.link/20250908072526.1833938-1-mingyen.hsieh@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit be7a1caf55ab255cb8b85cfeaf4412ad54848b09 Author: Quan Zhou Date: Thu Nov 27 15:49:11 2025 +0800 wifi: mt76: mt7925: fix AMPDU state handling in mt7925_tx_check_aggr commit bb8e38fcdbf7290d7f0cd572d2d8fdb2b641b492 upstream. Previously, the AMPDU state bit for a given TID was set before attempting to start a BA session, which could result in the AMPDU state being marked active even if ieee80211_start_tx_ba_session() failed. This patch changes the logic to only set the AMPDU state bit after successfully starting a BA session, ensuring proper synchronization between AMPDU state and BA session status. This fixes potential issues with aggregation state tracking and improves compatibility with mac80211 BA session management. Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free") Cc: stable@vger.kernel.org Signed-off-by: Quan Zhou Reviewed-by: Sean Wang Link: https://patch.msgid.link/d5960fbced0beaf33c30203f7f8fb91d0899c87b.1764228973.git.quan.zhou@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit 7b2800ba5f5f77a8ee7f4cbadb19cf1264597a34 Author: Jann Horn Date: Mon May 11 08:55:11 2026 -0700 exit: prevent preemption of oopsing TASK_DEAD task commit c1fa0bb633e4a6b11e83ffc57fa5abe8ebb87891 upstream. When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) Fixes: 7f80a2fd7db9 ("exit: Stop poorly open coding do_task_dead in make_task_dead") Cc: stable@kernel.org Signed-off-by: Jann Horn Acked-by: Peter Zijlstra Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 3711382a77342a9a1c3d2e7330dcfc7ea927f568 Author: Hyunwoo Kim Date: Mon May 11 15:41:19 2026 +0800 rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present commit aa54b1d27fe0c2b78e664a34fd0fdf7cd1960d71 upstream. The DATA-packet handler in rxrpc_input_call_event() and the RESPONSE handler in rxrpc_verify_response() copy the skb to a linear one before calling into the security ops only when skb_cloned() is true. An skb that is not cloned but still carries externally-owned paged fragments (e.g. SKBFL_SHARED_FRAG set by splice() into a UDP socket via __ip_append_data, or a chained skb_has_frag_list()) falls through to the in-place decryption path, which binds the frag pages directly into the AEAD/skcipher SGL via skb_to_sgvec(). Extend the gate to also unshare when skb_has_frag_list() or skb_has_shared_frag() is true. This catches the splice-loopback vector and other externally-shared frag sources while preserving the zero-copy fast path for skbs whose frags are kernel-private (e.g. NIC page_pool RX, GRO). The OOM/trace handling already in place is reused. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim Reviewed-by: Jiayuan Chen Acked-by: David Howells Signed-off-by: Linus Torvalds Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 98a2046d155f73f6cf5d2c493c5e09b4963e2e12 Author: David Howells Date: Mon May 11 15:41:04 2026 +0800 rxrpc: Fix conn-level packet handling to unshare RESPONSE packets commit 24481a7f573305706054c59e275371f8d0fe919f upstream. The security operations that verify the RESPONSE packets decrypt bits of it in place - however, the sk_buff may be shared with a packet sniffer, which would lead to the sniffer seeing an apparently corrupt packet (actually decrypted). Fix this by handing a copy of the packet off to the specific security handler if the packet was cloned. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com Signed-off-by: David Howells cc: Marc Dionne cc: Jeffrey Altman cc: Simon Horman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Link: https://patch.msgid.link/20260422161438.2593376-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski [Readd rxrpc_skb_put_response_copy which missed in bf20f46d94f1 in v6.12.86] Stable-dep-of: aa54b1d27fe0 ("rxrpc: Also unshare DATA/RESPONSE packets when paged frags are present") Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit f7f35a4f7fd574f5889bb2e4b397e14cbb83f6da Author: Hyunwoo Kim Date: Mon May 11 15:44:11 2026 +0800 Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() [ Upstream commit 00fdebbbc557a2fc21321ff2eaa22fd70c078608 ] l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del(). Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del") Signed-off-by: Hyunwoo Kim Signed-off-by: Luiz Augusto von Dentz [ Minor context conflict resolved. ] Signed-off-by: Wenshan Lan Signed-off-by: Sasha Levin commit ce051eede433f876d322ac3550a36a3c6fc4c231 Author: Jamal Hadi Salim Date: Thu Apr 30 11:29:55 2026 -0400 net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked commit 458d5615272d3de535748342eb68ca492343048c upstream. When red qdisc has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (red). And herein lies the problem. - red will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full) [ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq] [ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d [ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216 [ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048 [ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078 [ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000 [ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200 [ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000 [ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0 [ 78.671585][ T363] PKRU: 55555554 [ 78.671713][ T363] Call Trace: [ 78.671843][ T363] [ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq] [ 78.672148][ T363] ? __pfx__printk+0x10/0x10 [ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0 [ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0 [ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red] [ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf] [ 78.673566][ T363] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead. Fixes: 77be155cba4e ("pkt_sched: Add peek emulation for non-work-conserving qdiscs.") Reported-by: Manas Reported-by: Rakshit Awasthi Signed-off-by: Jamal Hadi Salim Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260430152957.194015-2-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fd44ab3d581ddecb6d63defeee3c9359cb4be53f Author: Paolo Bonzini Date: Mon Mar 9 12:40:52 2026 +0100 KVM: SVM: check validity of VMCB controls when returning from SMM commit be5fa8737d42c5ba16d2ea72c23681f8abbb07e8 upstream. The VMCB12 is stored in guest memory and can be mangled while in SMM; it is then reloaded by svm_leave_smm(), but it is not checked again for validity. Move the cached vmcb12 control and save consistency checks out of svm_set_nested_state() and into a helper, and reuse it in svm_leave_smm(). Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 11cbf294bac623bd57296f231199193087f57b4a Author: Zhengchuan Liang Date: Sun Mar 22 11:46:08 2026 -0700 net: af_key: zero aligned sockaddr tail in PF_KEY exports [ Upstream commit 426c355742f02cf743b347d9d7dbdc1bfbfa31ef ] PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr payload space, so IPv6 addresses occupy 32 bytes on the wire. However, `pfkey_sockaddr_fill()` initializes only the first 28 bytes of `struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized. Not every PF_KEY message is affected. The state and policy dump builders already zero the whole message buffer before filling the sockaddr payloads. Keep the fix to the export paths that still append aligned sockaddr payloads with plain `skb_put()`: - `SADB_ACQUIRE` - `SADB_X_NAT_T_NEW_MAPPING` - `SADB_X_MIGRATE` Fix those paths by clearing only the aligned sockaddr tail after `pfkey_sockaddr_fill()`. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 08de61beab8a ("[PFKEYV2]: Extension for dynamic update of endpoint address(es)") Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Xiao Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 3e223a7fd41ce6fffdb10577df9350385262bf33 Author: Jiawen Wu Date: Wed May 6 14:29:26 2026 +0800 net: txgbe: fix RTNL assertion warning when remove module [ Upstream commit e159f05e12cc1111a3103b99375ddf0dfd0e7d63 ] For the copper NIC with external PHY, the driver called phylink_connect_phy() during probe and phylink_disconnect_phy() during remove. It caused an RTNL assertion warning in phylink_disconnect_phy() upon module remove. To fix this, add rtnl_lock() and rtnl_unlock() around the phylink_disconnect_phy() in remove function. ------------[ cut here ]------------ RTNL: assertion failed at drivers/net/phy/phylink.c (2351) WARNING: drivers/net/phy/phylink.c:2351 at phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464 Modules linked in: ... CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+ Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024 RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7 48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000 RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020 RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000 R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348 FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: txgbe_remove_phy+0xbb/0xd0 [txgbe] txgbe_remove+0x4c/0xb0 [txgbe] pci_device_remove+0x41/0xb0 device_remove+0x43/0x80 device_release_driver_internal+0x206/0x270 driver_detach+0x4a/0xa0 bus_remove_driver+0x83/0x120 driver_unregister+0x2f/0x60 pci_unregister_driver+0x40/0x90 txgbe_driver_exit+0x10/0x850 [txgbe] __do_sys_delete_module.isra.0+0x1c3/0x2f0 __x64_sys_delete_module+0x12/0x20 x64_sys_call+0x20c3/0x2390 do_syscall_64+0x11c/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_syscall_64+0x15a/0x1500 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_fault+0x312/0x580 ? srso_alias_return_thunk+0x5/0xfbef5 ? __handle_mm_fault+0x9d5/0x1040 ? srso_alias_return_thunk+0x5/0xfbef5 ? count_memcg_events+0x101/0x1d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? handle_mm_fault+0x1e8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? do_user_addr_fault+0x2f8/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? irqentry_exit+0xb2/0x600 ? srso_alias_return_thunk+0x5/0xfbef5 ? exc_page_fault+0x92/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 02b2a6f91b90 ("net: txgbe: support copper NIC with external PHY") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/8B47A5872884147D+20260407094041.4646-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6044392d9cace3a3672b02c8bc7d38b502e51734 Author: Qingfang Deng Date: Wed Apr 15 10:24:50 2026 +0800 flow_dissector: do not dissect PPPoE PFC frames [ Upstream commit d6c19b31a3c1d519fabdcf0aa239e6b6109b9473 ] RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT RECOMMENDED for PPPoE. In practice, pppd does not support negotiating PFC for PPPoE sessions, and the flow dissector driver has assumed an uncompressed frame until the blamed commit. During the review process of that commit [1], support for PFC is suggested. However, having a compressed (1-byte) protocol field means the subsequent PPP payload is shifted by one byte, causing 4-byte misalignment for the network header and an unaligned access exception on some architectures. The exception can be reproduced by sending a PPPoE PFC frame to an ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE session is active on that interface: $ 0 : 00000000 80c40000 00000000 85144817 $ 4 : 00000008 00000100 80a75758 81dc9bb8 $ 8 : 00000010 8087ae2c 0000003d 00000000 $12 : 000000e0 00000039 00000000 00000000 $16 : 85043240 80a75758 81dc9bb8 00006488 $20 : 0000002f 00000007 85144810 80a70000 $24 : 81d1bda0 00000000 $28 : 81dc8000 81dc9aa8 00000000 805ead08 Hi : 00009d51 Lo : 2163358a epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50 ra : 805ead08 __skb_get_hash_net+0x74/0x12c Status: 11000403 KERNEL EXL IE Cause : 40800010 (ExcCode 04) BadVA : 85144817 PrId : 0001992f (MIPS 1004Kc) Call Trace: [<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50 [<805ead08>] __skb_get_hash_net+0x74/0x12c [<805ef330>] get_rps_cpu+0x1b8/0x3fc [<805fca70>] netif_receive_skb_list_internal+0x324/0x364 [<805fd120>] napi_complete_done+0x68/0x2a4 [<8058de5c>] mtk_napi_rx+0x228/0xfec [<805fd398>] __napi_poll+0x3c/0x1c4 [<805fd754>] napi_threaded_poll_loop+0x234/0x29c [<805fd848>] napi_threaded_poll+0x8c/0xb0 [<80053544>] kthread+0x104/0x12c [<80002bd8>] ret_from_kernel_thread+0x14/0x1c Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000 To reduce the attack surface and maintain performance, do not process PPPoE PFC frames. [1] https://lore.kernel.org/r/20220630231016.GA392@debian.home Fixes: 46126db9c861 ("flow_dissector: Add PPPoE dissectors") Signed-off-by: Qingfang Deng Link: https://patch.msgid.link/20260415022456.141758-1-qingfang.deng@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fca7aa0264ae99e5ff287d0ced5af0b82b121c4f Author: Ankit Soni Date: Thu Jan 22 15:30:38 2026 +0000 iommu/amd: serialize sequence allocation under concurrent TLB invalidations commit 9e249c48412828e807afddc21527eb734dc9bd3d upstream. With concurrent TLB invalidations, completion wait randomly gets timed out because cmd_sem_val was incremented outside the IOMMU spinlock, allowing CMD_COMPL_WAIT commands to be queued out of sequence and breaking the ordering assumption in wait_on_sem(). Move the cmd_sem_val increment under iommu->lock so completion sequence allocation is serialized with command queuing. And remove the unnecessary return. Fixes: d2a0cac10597 ("iommu/amd: move wait_on_sem() out of spinlock") Tested-by: Srikanth Aithal Reported-by: Srikanth Aithal Signed-off-by: Ankit Soni Reviewed-by: Vasant Hegde Signed-off-by: Joerg Roedel [Salvatore Bonaccorso: Backport to v6.12.y where f32fe7cb0198 ("iommu/amd: Add support to remap/unmap IOMMU buffers for kdump") is not present] Signed-off-by: Salvatore Bonaccorso Signed-off-by: Sasha Levin commit 96bff7ec9b2398afb911fcd828009398a32a9985 Author: Uros Bizjak Date: Mon Oct 7 10:43:31 2024 +0200 iommu/amd: Use atomic64_inc_return() in iommu.c commit 5ce73c524f5fb5abd7b1bfed0115474b4fb437b4 upstream. Use atomic64_inc_return(&ref) instead of atomic64_add_return(1, &ref) to use optimized implementation and ease register pressure around the primitive for targets that implement optimized variant. Signed-off-by: Uros Bizjak Cc: Joerg Roedel Cc: Suravee Suthikulpanit Cc: Will Deacon Cc: Robin Murphy Reviewed-by: Jason Gunthorpe Link: https://lore.kernel.org/r/20241007084356.47799-1-ubizjak@gmail.com Signed-off-by: Joerg Roedel Signed-off-by: Salvatore Bonaccorso Stable-dep-of: 9e249c48412828e807afddc21527eb734dc9bd3d ("iommu/amd: serialize sequence allocation under concurrent TLB invalidations") Signed-off-by: Sasha Levin commit 06c19c967b845b63172601fe459667d973b7e6b7 Author: Sean Christopherson Date: Tue May 5 08:59:56 2026 +0200 KVM: x86: Fix shadow paging use-after-free due to unexpected GFN commit 0cb2af2ea66ad8ff195c156ea690f11216285bdf upstream. The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus the SPTE index. This assumption breaks for shadow paging if the guest page tables are modified between VM entries (similar to commit aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE", 2026-03-27). The flow is as follows: - a PDE is installed for a 2MB mapping, and a page in that area is accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages; the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because the guest's mapping is a huge page (and thus contiguous). - the PDE mapping is changed from outside the guest. - the guest accesses another page in the same 2MB area. KVM installs a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN (i.e. based on the new mapping, as changed in the previous step) but that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore the rmap entry cannot be found and removed when the kvm_mmu_page is zapped. - the memslot that covers the first 2MB mapping is deleted, and the kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove() only looks at the [sp->gfn, sp->gfn + 511] range established in step 1, and fails to find the rmap entry that was recorded by step 3. - any operation that causes an rmap walk for the same page accessed by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page. This includes dirty logging or MMU notifier invalidations (e.g., from MADV_DONTNEED). The underlying issue is that KVM's walking of shadow PTEs assumes that if a SPTE is present when KVM wants to install a non-leaf SPTE, then the existing kvm_mmu_page must be for the correct gfn. Because the only way for the gfn to be wrong is if KVM messed up and failed to zap a SPTE... which shouldn't happen, but *actually* only happens in response to a guest write. That bug dates back literally forever, as even the first version of KVM assumes that the GFN matches and walks into the "wrong" shadow page. However, that was only an imprecision until 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") came along. Fix it by checking for a target gfn mismatch and zapping the existing SPTE. That way the old SP and rmap entries are gone, KVM installs the rmap in the right location, and everyone is happy. Fixes: 2032a93d66fa ("KVM: MMU: Don't allocate gfns page for direct mmu pages") Fixes: 6aa8b732ca01 ("kvm: userspace interface") Reported-by: Alexander Bulekov Reported-by: Fred Griffoul Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Link: https://patch.msgid.link/20260503201029.106481-1-pbonzini@redhat.com/ Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin commit d042d69b417515959e49021fef008c9b04a99bd5 Author: Rick Edgecombe Date: Thu May 7 16:53:48 2026 -0700 x86/shstk: Prevent deadlock during shstk sigreturn [ Upstream commit 9874b2917b9fbc30956fee209d3c4aa47201c64e ] During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by doing the read of the userspace memory via gup. Embed it in the get_shstk_data() helper. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long. [Due to missing per-vma MM sequence counter, use a simpler GUP based solution for the backport] Cc: # Depends on https://lore.kernel.org/all/20260504205856.536296-1-rick.p.edgecombe@intel.com/ Signed-off-by: Rick Edgecombe Signed-off-by: Sasha Levin commit 1a30468eff661937d978495644d2e5ebfeef5ce6 Author: Linus Torvalds Date: Wed Apr 8 13:18:57 2026 -0700 x86: shadow stacks: proper error handling for mmap lock [ Upstream commit 52f657e34d7b21b47434d9d8b26fa7f6778b63a0 ] 김영민 reports that shstk_pop_sigframe() doesn't check for errors from mmap_read_lock_killable(), which is a silly oversight, and also shows that we haven't marked those functions with "__must_check", which would have immediately caught it. So let's fix both issues. Reported-by: 김영민 Acked-by: Oleg Nesterov Acked-by: Dave Hansen Acked-by: Rick Edgecombe Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 1bda80a7be91404fb849ccdde08437e86e38e816 Author: Suren Baghdasaryan Date: Fri Nov 22 09:44:15 2024 -0800 mm: convert mm_lock_seq to a proper seqcount [ Upstream commit eb449bd96954b1c1e491d19066cfd2a010f0aa47 ] Convert mm_lock_seq to be seqcount_t and change all mmap_write_lock variants to increment it, in-line with the usual seqcount usage pattern. This lets us check whether the mmap_lock is write-locked by checking mm_lock_seq.sequence counter (odd=locked, even=unlocked). This will be used when implementing mmap_lock speculation functions. As a result vm_lock_seq is also change to be unsigned to match the type of mm_lock_seq.sequence. Suggested-by: Peter Zijlstra Signed-off-by: Suren Baghdasaryan Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Liam R. Howlett Link: https://lkml.kernel.org/r/20241122174416.1367052-2-surenb@google.com Stable-dep-of: 52f657e34d7b ("x86: shadow stacks: proper error handling for mmap lock") Signed-off-by: Sasha Levin commit ac0481830d98cbd90c332b7cdc7d076c8c59dcf3 Author: DaeMyung Kang Date: Sat Apr 25 18:38:28 2026 +0900 ksmbd: rewrite stop_sessions() with restartable iteration commit c444139cb747bf6de1922b39900fdf02281490f4 upstream. stop_sessions() walks conn_list with hash_for_each() and, for every entry, drops conn_list_lock across the transport ->shutdown() call before re-acquiring the read lock to continue the loop. The hash walk relies on cross-iteration state (the current bucket and the hlist position), which is not preserved across unlock/relock: if another thread performs a list mutation during the unlocked window, the ongoing iteration becomes unreliable and can re-visit connections that have already been handled or skip connections that have not. The outer `if (!hash_empty(conn_list)) goto again;` retry masks the symptom in the common case but does not address the unsafe iteration itself. Reframe the loop so it never relies on iterator state across unlock/relock. Under conn_list_lock held for read, pick the first connection whose ->shutdown() has not yet been issued by this path, pin it by taking an extra reference, record that fact on the connection and mark it EXITING while still inside the locked walk, then drop the lock. Then call ->shutdown() outside the lock, drop the pin (freeing the connection if the handler already released its reference), and restart from the top. Use a new per-connection flag, conn->stop_called, as the "shutdown issued from stop_sessions()" marker rather than reusing the status state. ksmbd_conn_set_exiting() is also invoked by ksmbd_sessions_deregister() on sibling channels of a multichannel session without issuing a transport shutdown, so treating KSMBD_SESS_EXITING as "already handled here" would skip connections that still need shutdown() to wake their handler out of recv(), leaving the outer retry waiting indefinitely for the hash to drain. stop_sessions() is serialised by init_lock in ksmbd_conn_transport_destroy(), so writing stop_called under the read lock has no other writer. Set EXITING inside the locked walk so the selection, the stop_called marker, and the status transition all happen together, and guard against regressing a connection that has already advanced to KSMBD_SESS_RELEASING on its own (for example, if the handler exited its receive loop for an unrelated reason between teardown steps). When the pin drop is the last put, release the transport and pair ida_destroy(&target->async_ida) with the ida_init() done in ksmbd_conn_alloc(), so stop_sessions() retiring a connection on its own does not leak the xarray backing of the embedded async_ida. The outer retry with msleep() is kept to wait for handler threads to reach ksmbd_conn_free() and drain the hash. Observed with an instrumented build that logs one line per visit and widens the unlocked window before ->shutdown() by 200 ms, under five concurrent cifs mounts (nosharesock, one connection each): * Current code: the same connection address is revisited many times during a single stop_sessions() call and ->shutdown() is invoked well beyond the number of live connections before the hash finally drains. * Rewritten code: each live connection produces exactly one ->shutdown() call; the function returns as soon as the hash is empty. Functional teardown via `ksmbd.control --shutdown` with the same five mounts completes cleanly on the rewritten path. Performance is observably unchanged. Tearing down N concurrent nosharesock cifs connections with `ksmbd.control --shutdown` + `rmmod ksmbd` takes essentially the same wall time before and after the rewrite: N before after 10 4.93s 5.34s 30 7.34s 7.03s 50 7.31s 7.01s (3-run avg: 7.04s vs 7.25s) 100 6.98s 6.78s 200 6.77s 6.89s and the number of ->shutdown() calls equals the number of live connections on both paths when the race is not widened. The teardown is dominated by the msleep(100)-based outer retry waiting for handler threads to run ksmbd_conn_free(), not by the iteration itself; the restartable loop's worst-case O(N^2) visit cost is in the microseconds even at N=200 and sits far below the msleep(100) granularity. Applied alone on top of ksmbd-for-next-next, this patch does not introduce a new leak site. Under the same reproducer (10x concurrent-holders + ss -K + ksmbd.control --shutdown + rmmod), the tree still shows the pre-existing per-connection transport leak count that arises when the last refcount drop lands in one of ksmbd_conn_r_count_dec(), __free_opinfo() or session_fd_check() - all of which end with a bare kfree() today. kmemleak backtraces for the unreferenced objects point into the TCP accept path (sk_clone -> inet_csk_clone_lock, sock_alloc_inode) and none involve stop_sessions(). Plugging those bare-kfree sites is the responsibility of the follow-up patch. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit a98c266a2fa971a0c06a672b76c1e5e388b86554 Author: Johan Hovold Date: Tue Mar 24 09:23:23 2026 +0100 spi: rockchip: fix controller deregistration commit 53e7a16070feb7d1d4d81a583eaac5e25048b9c3 upstream. Make sure to deregister the controller before freeing underlying resources like DMA channels during driver unbind. Fixes: 64e36824b32b ("spi/rockchip: add driver for Rockchip RK3xxx SoCs integrated SPI") Cc: stable@vger.kernel.org # 3.17 Cc: addy ke Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260324082326.901043-3-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 98ed1383f597f8a45b6cb816bb20b96d46eeceda Author: Mark Brown Date: Thu Mar 26 14:52:41 2026 +0000 ASoC: SOF: Don't allow pointer operations on unconfigured streams commit c5b6285aae050ff1c3ea824ca3d88ac4be1e69c8 upstream. When reporting the pointer for a compressed stream we report the current I/O frame position by dividing the position by the number of channels multiplied by the number of container bytes. These values default to 0 and are only configured as part of setting the stream parameters so this allows a divide by zero to be configured. Validate that they are non zero, returning an error if not Fixes: c1a731c71359 ("ASoC: SOF: compress: Add support for computing timestamps") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260326-asoc-compress-tstamp-params-v1-1-3dc735b3d599@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit a11ad147c3c216d29536350bb4e76cccd0ea2b5d Author: Sina Hassani Date: Fri Apr 10 11:32:44 2026 -0700 iommufd: Fix a race with concurrent allocation and unmap commit 8602018b1f17fbdaa5e5d79f4c8603ad20640c12 upstream. iopt_unmap_iova_range() releases the lock on iova_rwsem inside the loop body when getting to the more expensive unmap operations. This is fine on its own, except the loop condition is based on the first area that matches the unmap address range. If a concurrent call to map picks an area that was unmapped in previous iterations, the loop mistakenly tries to unmap it. This is reproducible by having one userspace thread map buffers and pass them to another thread that unmaps them. The problem manifests as EBUSY errors with single page mappings. Fix this by advancing the start pointer after unmapping an area. This ensures each iteration only examines the IOVA range that remains mapped, which is guaranteed not to have overlaps. Cc: stable@vger.kernel.org Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping") Link: https://patch.msgid.link/r/CAAJpGJSR4r_ds1JOjmkqHtsBPyxu8GntoeW08Sk5RNQPmgi+tg@mail.gmail.com Signed-off-by: Sina Hassani Reviewed-by: Kevin Tian Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 5b8d6a94f2e2cc501e2a91af2f0cf62995c2894a Author: Shivam Kalra Date: Sun Apr 26 19:38:41 2026 +0530 ACPI: video: force native backlight on HP OMEN 16 (8A44) commit 4b506ea5351a1f5937ac632a4a5c35f6f796cc41 upstream. The HP OMEN 16 Gaming Laptop (board name 8A44) has a mux-less hybrid GPU configuration with AMD Rembrandt (Radeon 680M) and NVIDIA GA104 (RTX 3070 Ti). The internal eDP panel is wired to the AMD iGPU. When Nouveau loads without GSP firmware, the ACPI video backlight device (acpi_video0) gets registered alongside the native AMD backlight (amdgpu_bl2). In this state, writes to amdgpu_bl2 update the software brightness value but fail to change the physical panel brightness. Force native backlight to prevent acpi_video0 from registering. Confirmed that booting with acpi_backlight=native resolves the issue. Cc: All applicable Signed-off-by: Shivam Kalra Link: https://patch.msgid.link/20260426-omen-16-backlight-fix-v1-1-62364f268ea6@zohomail.in Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 8c18175a871d0434a4ed216dcfd88974f0eb78b6 Author: Jinjie Ruan Date: Fri Apr 17 12:01:12 2026 +0800 ACPI: CPPC: Fix related_cpus inconsistency during CPU hotplug commit 75141a770f4f8225d316f6c7e146723a32e9720e upstream. When concurrently bringing up and down two SMT threads of a physical core, many warning call traces occur as below: The issue timeline is as follows: 1. When the system starts, cpufreq: CPU: 220, policy->related_cpus: 220-221, policy->cpus: 220-221 2. Offline CPU 220 and CPU 221. 3. Online CPU 220 - CPU 221 is now offline, as acpi_get_psd_map() use for_each_online_cpu(), so the cpu_data->shared_cpu_map, policy->cpus, and related_cpus has only CPU 220. cpufreq: CPU: 220, policy->related_cpus: 220, policy->cpus: 220 4. Offline CPU 220 5. Online CPU 221, the below call trace occurs: - Since CPU 220 and CPU 221 share one policy, and policy->related_cpus = 220 after step 3, so CPU 221 is not in policy->related_cpus but per_cpu(cpufreq_cpu_data, cpu221) is not NULL. After reverting commit 56eb0c0ed345 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs"), the issue disappeared. The _PSD (P-State Dependency) defines the hardware-level dependency of frequency control across CPU cores. Since this relationship is a physical attribute of the hardware topology, it remains constant regardless of the online or offline status of the CPUs. Using for_each_online_cpu() in acpi_get_psd_map() is problematic. If a CPU is offline, it will be excluded from the shared_cpu_map. Consequently, if that CPU is brought online later, the kernel will fail to recognize it as part of any shared frequency domain. Switch back to for_each_possible_cpu() to ensure that all cores defined in the ACPI tables are correctly mapped into their respective performance domains from the start. This aligns with the logic of policy->related_cpus, which must encompass all potentially available cores in the domain to prevent logic gaps during CPU hotplug operations. To resolve the original issue regarding the "nosmt" or "nosmt=force" boot parameter, as send_pcc_cmd() function already does if (!desc) continue, so reverting that loop back to for_each_possible_cpu() is ok, only need to change the match_cpc_ptr NULL case in acpi_get_psd_map() to continue as Sean suggested. How to reproduce, on arm64 machine with SMT support which use acpi cppc cpufreq driver: bash test.sh 220 & bash test.sh 221 & The test.sh is as below: while true do echo 0 > /sys/devices/system/cpu/cpu${1}/online sleep 0.5 cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus echo 1 > /sys/devices/system/cpu/cpu${1}/online cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus done CPU: 221 PID: 1119 Comm: cpuhp/221 Kdump: loaded Not tainted 6.6.0debug+ #5 Hardware name: To be filled by O.E.M. S920X20/BC83AMDA01-7270Z, BIOS 20.39 09/04/2024 pstate: a1400009 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : cpufreq_online+0x8ac/0xa90 lr : cpuhp_cpufreq_online+0x18/0x30 sp : ffff80008739bce0 x29: ffff80008739bce0 x28: 0000000000000000 x27: ffff28400ca32200 x26: 0000000000000000 x25: 0000000000000003 x24: ffffd483503ff000 x23: ffffd483504051a0 x22: ffffd48350024a00 x21: 00000000000000dd x20: 000000000000001d x19: ffff28400ca32000 x18: 0000000000000000 x17: 0000000000000020 x16: ffffd4834e6a3fc8 x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000000001 x12: 00000000ffffffff x11: 0000000000000040 x10: ffffd48350430728 x9 : ffffd4834f087c78 x8 : 0000000000000001 x7 : ffff2840092bdf00 x6 : ffffd483504264f0 x5 : ffffd48350405000 x4 : ffff283f7f95cc60 x3 : 0000000000000000 x2 : ffff53bc2f94b000 x1 : 00000000000000dd x0 : 0000000000000000 Call trace: cpufreq_online+0x8ac/0xa90 cpuhp_cpufreq_online+0x18/0x30 cpuhp_invoke_callback+0x128/0x580 cpuhp_thread_fun+0x110/0x1b0 smpboot_thread_fn+0x140/0x190 kthread+0xec/0x100 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Cc: All applicable Fixes: 56eb0c0ed345 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs") Co-developed-by: Sean Kelley Signed-off-by: Sean Kelley Signed-off-by: Jinjie Ruan [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260417040112.3727756-1-ruanjinjie@huawei.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit ad766e7f32e2822ce1e9998809a3dcc8b9184e37 Author: Jan Schär Date: Sat Apr 11 11:26:06 2026 +0200 ACPI: video: Add backlight=native quirk for Dell OptiPlex 7770 AIO commit ad7997f5a01af6f711fe6b6a2df578b964109d49 upstream. The Dell OptiPlex 7770 AIO needs the same quirk as the 7760 AIO. The backlight can be controlled with the native controller, intel_backlight, but not with dell_uart_backlight. I dumped the DSDT using acpidump, acpixtract and iasl, and confirmed that it contains the DELL0501 device. When loading the dell_uart_backlight driver with `rmmod dell_uart_backlight`, `modprobe dell_uart_backlight dyndbg`, it reports "Firmware version: GL_Re_V18". Fixes: cd8e468efb4f ("ACPI: video: Add Dell UART backlight controller detection") Cc: All applicable Signed-off-by: Jan Schär Reviewed-by: Hans de Goede Link: https://patch.msgid.link/20260411092606.47925-1-jan@jschaer.ch Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 7ef8e29d9012686434948d1a928a9777091948f5 Author: Guangshuo Li Date: Mon Apr 13 21:53:43 2026 +0800 ACPI: scan: Use acpi_dev_put() in object add error paths commit 9c0acc169ac71535477caedea8315f7041c5f07c upstream. After acpi_init_device_object(), the lifetime of struct acpi_device is managed by the driver core through reference counting. Both acpi_add_power_resource() and acpi_add_single_object() call acpi_init_device_object() and then invoke acpi_device_add(). If that fails, their error paths call the release callback directly instead of dropping the device reference through acpi_dev_put(). This bypasses the normal device lifetime rules and frees the object without releasing the reference acquired by device_initialize(), which may lead to a refcount leak. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix both error paths by using acpi_dev_put() and let the release callback handle the final cleanup. Fixes: 781d737c7466 ("ACPI: Drop power resources driver") Fixes: 718fb0de8ff88 ("ACPI: fix NULL bug for HID/UID string") Cc: All applicable Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260413135343.2884481-1-lgs201920130244@gmail.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 18dd358de72d57993422cbb5dfb29ccd74efe192 Author: Rajat Gupta Date: Sun May 3 20:51:10 2026 -0700 fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free commit 8de779dc40d35d39fa07387b6f921eb11df0f511 upstream. dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation. Signed-off-by: Rajat Gupta Acked-by: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 88881dc1da86064f479378bc9d0a4956c3d0bb12 Author: Corey Minyard Date: Mon Apr 20 13:02:18 2026 -0500 ipmi:si: Return state to normal if message allocation fails commit 09dd798270ff582d7309f285d4aaf5dbebae01cb upstream. There were places where nothing would get started if a message allocation failed, so the driver needs to return to normal state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman commit 7f7ada72c07a83b46045ddfeee526bd9e2e3c8f0 Author: Corey Minyard Date: Mon Apr 20 12:50:09 2026 -0500 ipmi: Check event message buffer response for bad data commit 36920f30e78e69df01f9691c470b6f3ba8aebf98 upstream. The event message buffer response data size got checked later when processing, but check it right after the response comes back. It appears some BMCs may return an empty message instead of an error when fetching events. There are apparently some new BMCs that make this error, so we need to compensate. Reported-by: Matt Fleming Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman commit e20212b431bef217d3886b86bbc90cc3ed00de68 Author: Corey Minyard Date: Mon Apr 20 12:39:51 2026 -0500 ipmi: Add limits to event and receive message requests commit c4cca236968683eb0d59abfb12d5c7e4d8514227 upstream. The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. Reported-by: Matt Fleming Closes: https://lore.kernel.org/lkml/20260415115930.3428942-1-matt@readmodwrite.com/ Fixes: <1da177e4c3f4> ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman commit 72cc5ea7ef32bb5fa38bf0dd2e56fcd73aa8c89e Author: Greg Kroah-Hartman Date: Sat Apr 11 14:06:00 2026 +0200 scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() commit 772a896a56e0e3ef9424a025cec9176f9d8f4552 upstream. target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. Cc: Martin K. Petersen Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026041159-garter-theft-3be0@gregkh Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman