commit 064531c7e30cd67b79c0c694ac97f00c7796f4d6 Author: Greg Kroah-Hartman Date: Wed Sep 2 14:31:02 2026 +0200 Linux 6.12.108 Link: https://lore.kernel.org/r/20260831133359.740409777@linuxfoundation.org Tested-by: Francesco Dolcini Tested-by: Florian Fainelli Tested-by: Brett A C Sheffield Tested-by: Peter Schneider Tested-by: Dominique Martinet Tested-by: Harshit Mogalapalli Tested-by: Pavel Machek (CIP) Tested-by: Salvatore Bonaccorso Tested-by: Shuah Khan Tested-by: Miguel Ojeda Tested-by: Ron Economos Tested-by: Barry K. Nathan Signed-off-by: Greg Kroah-Hartman commit b3cde26a66b04f1d90ed0b675899c88b4e49d424 Author: Miguel Peñaranda Date: Mon Aug 10 14:12:09 2026 +0200 usb: usbfs: fix use-after-free of usb_device in usbdev_release() commit 0dd68b5d01d022fc9c5e71c82a82b0a94d3d0671 upstream. usbdev_release() drops its reference to the struct usb_device before draining the list of completed async URBs, but that drain path reads back through the same object: free_async() calls dec_usb_memory_use_count() for any URB whose buffer came from the usbfs mmap() region, and its first statement is bus_to_hcd(ps->dev->bus). After a disconnect the usbfs reference can be the last one, in which case usb_put_dev() frees the device and the subsequent loop reads offset 80 of freed memory and uses the result as a struct usb_hcd *, which hcd_buffer_free_pages() then dereferences. This is reachable by an unprivileged process that has read/write access to a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the mapping, wait for the device to be unplugged, then munmap() and close(). It reproduces on every attempt rather than being a race, because a live MAP_SHARED vma holds a reference on the struct file, so usbdev_release() cannot run until the last vma is gone and the freeing branch of dec_usb_memory_use_count() is always taken. BUG: KASAN: slab-use-after-free in dec_usb_memory_use_count+0x3ae/0x410 Read of size 8 at addr ffff8880122ee050 by task poc/769 CPU: 1 UID: 1000 PID: 769 Comm: poc Tainted: G B 6.12.94 #3 Call Trace: dec_usb_memory_use_count+0x3ae/0x410 free_async+0x2aa/0x4f0 usbdev_release+0x375/0x460 __fput+0x3ea/0xb50 __x64_sys_close+0x86/0x100 Allocated by task 11: usb_alloc_dev+0x55/0xd90 hub_event+0x2524/0x43d0 Freed by task 769: kfree+0x121/0x360 device_release+0xd2/0x280 usb_put_dev+0x23/0x30 usbdev_release+0x2d8/0x460 Release the device reference after the drain loop instead. Nothing between the two points requires it to have been dropped. Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-5 Signed-off-by: Miguel Peñaranda Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260810121209.795089-1-mig.penaranda07@gmail.com Signed-off-by: Greg Kroah-Hartman commit 9a72b180f0575e41471e088e09bddc4b73d6dee2 Author: Devin Wittmayer Date: Tue Jul 14 19:33:48 2026 -0700 wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb commit ef3e34874d2332d0f63e72c2c35ce5c93568c125 upstream. mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB header onto every skb and assumes the headroom for them is already there. That holds for locally generated traffic, where mac80211 reserves hw->extra_tx_headroom, but forwarded frames are sent through ieee80211_8023_xmit(), which does not reserve it. Bridge a wired interface to an mt7925u AP and the first forwarded frame that arrives short panics the kernel: skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1 kernel BUG at net/core/skbuff.c:212! Call trace: skb_panic+0x58/0x60 (P) skb_push+0x58/0x60 mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common] mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb] __mt76_tx_queue_skb+0x54/0xe8 [mt76] mt76_txq_schedule.part.0+0x204/0x478 [mt76] mt76_txq_schedule_all+0x50/0x80 [mt76] mt792x_tx_worker+0x68/0x100 [mt792x_lib] __mt76_worker_fn+0x84/0x150 [mt76] Whether a given setup hits it depends on how much headroom the ingress netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging onboard ethernet to a Netgear A9000; originally reported on an MT7986 router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet), which leaves more headroom, helped narrow the trigger to the ingress path. The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76: mt7921: don't assume adequate headroom for SDIO headers"), but mt7925 was copied from mt7921 without the fix. Add the same guard here. Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips") Cc: stable@vger.kernel.org Link: https://github.com/morrownr/mt76/issues/52 Signed-off-by: Devin Wittmayer Link: https://patch.msgid.link/20260715023348.59506-1-lucid_duck@justthetip.ca Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit ff172092cba7ec990ecc7b610ce703e19570b8f0 Author: Shuangpeng Bai Date: Wed Aug 5 21:35:02 2026 -0400 USB: c67x00: fix use-after-free in c67x00_add_iso_urb() commit b1e24de475bf2d66fffc9103f3444b783527d55a upstream. When TD creation fails for the last packet of an isochronous URB, c67x00_add_iso_urb() gives the URB back before updating the endpoint scheduling state. c67x00_giveback_urb() frees the URB private data, and the completion callback may release the final URB reference. The following accesses to urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed memory. Update next_frame and cnt before giving back the failed final packet, making the giveback the last operation that uses the URB and its private data. Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver") Cc: stable@vger.kernel.org Signed-off-by: Shuangpeng Bai Link: https://patch.msgid.link/20260806013502.322067-1-shuangpeng.kernel@gmail.com Signed-off-by: Greg Kroah-Hartman commit 75894aa664f3b3953020e9ce919bde43cebe6bd1 Author: Johan Hovold Date: Thu Aug 6 15:52:48 2026 +0200 USB: serial: spcp8x5: drop broken carrier detect support commit d37186bd95a07e334447f47274a38a311dad2172 upstream. The driver does not support modem status notifications and instead used to fetch the modem status once at open() and subsequently operate on and report stale state. As part of fixing this, a call to fetch the status was added to carrier_raised(), which does not work as that callback must not sleep (e.g. unlike tiocmget()). Drop the broken carrier detect support. Fixes: e1ed212d8593 ("USB: spcp8x5: add proper modem-status support") Cc: stable@vger.kernel.org # 3.10 Reported-by: syzbot+3b514b87202742f22c44@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/6a73cea2.01d0871a.3a0d52.000d.GAE@google.com Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 060db7d48af1e650643c8b8319111a9ea2ce4486 Author: Jiale Yao Date: Sun Jul 26 00:27:51 2026 +0800 USB: serial: option: fix slab OOB read in interrupt URB callback commit 885d802f544ca7bfa8f3984d94233cce715bb6b3 upstream. The interrupt URB buffer is allocated in setup_port_interrupt_in() based on the endpoint's wMaxPacketSize: buffer_size = usb_endpoint_maxp(epd); port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); When a USB device declares wMaxPacketSize = 8 on its interrupt IN endpoint, the buffer is allocated from kmalloc-8 cache (exactly 8 bytes). If the device sends a short packet (actual_length < wMaxPacketSize), the URB completes with status == 0 and the callback proceeds to read: data[sizeof(struct usb_ctrlrequest)] which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte buffer. This results in a slab out-of-bounds read. Fix this by adding the missing bounds check: first verify that the actual length is large enough to contain the struct usb_ctrlrequest header before accessing req_pkt->bRequestType and req_pkt->bRequest, and then verify that there is an additional byte for the modem signal state before reading data[sizeof(struct usb_ctrlrequest)] inside the conditional. Use sizeof(*req_pkt) instead of sizeof(struct usb_ctrlrequest) for consistency. Assisted-by: Claude:deepseek-v4-pro Signed-off-by: Jiale Yao Fixes: 58cfe9113e48 ("[PATCH] USB: add Option Card driver") Cc: stable@vger.kernel.org # v2.6.12 [ johan: use dev_err(); split signals declaration and initialisation ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 5a625fc2284e35f33693efd9534aebaca3b005d4 Author: Will Porter Date: Mon Aug 24 17:57:57 2026 -0500 ALSA: usb-audio: Complete cleanup after system-resume errors commit 1739a976312e110c93a8dee66a1cdf893a1b187e upstream. A failed system resume can leave the card unusable until reboot. usb_audio_resume() jumps to err_out when snd_usb_pcm_resume() or snd_usb_mixer_resume() fails. The error path skips the out: block, which restores D0 and decrements chip->num_suspended_intf. The card stays in SNDRV_CTL_POWER_D3hot, so later control access blocks in snd_power_ref_and_wait(). USB core logs an interface resume callback error. It does not retry that callback, so a later callback cannot complete the skipped cleanup. usb_audio_suspend() increments num_suspended_intf before returning success. A system-resume callback must consume the system-suspend count even if a component resume fails. Otherwise, the stranded count skews later suspend and resume cycles. Do not apply this cleanup to runtime-resume errors. Runtime PM can retry -EAGAIN or -EBUSY without another suspend callback. The count must continue to describe that suspended interface. Other runtime-resume errors latch runtime_error in the PM core and do not cause an immediate callback retry. Both parts of the system-resume error path are longstanding. Commit 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") introduced err_out past the D0 restore. Commit 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume") later moved num_suspended_intf-- into the out: block. The error path now skips both operations. No third-party code is needed to reach the error path. snd_usb_mixer_resume() ends in snd_usb_mixer_activate(), which returns the result of usb_submit_urb() for devices that have a mixer status URB. Its mixer->private_resume hook can also fail through scarlett2_init_notify(). snd_usb_pcm_resume() issues a SET_CUR request to a UAC3 power domain. It can return -EPIPE or -EIO when the device stalls the request. Route a component error through out: only when system_suspend is nonzero. Continue to return runtime-resume errors through err_out. Later component resume stages remain skipped. The original error still reaches USB core. A later transfer can fail if the device did not recover. I reproduced the system-resume failure on an Audient iD14 MkI with an out-of-tree diagnostic mixer resume hook. An injected -EIO on the unpatched core left control readers in uninterruptible sleep in snd_power_ref_and_wait() until a reboot. With this patch, the same failure restored control access. A second system suspend and resume also succeeded after I disabled fault injection. Assisted-by: Claude:claude-opus-5 Assisted-by: Antigravity:gemini-3.1-pro-high Assisted-by: Codex:gpt-5.6-sol Fixes: 88a8516a2128a ("ALSA: usbaudio: implement USB autosuspend") Fixes: 862b2509d157c ("ALSA: usb-audio: Fix inconsistent card PM state after resume") Cc: Signed-off-by: Will Porter Link: https://patch.msgid.link/20260824225757.26749-1-mrwillporter@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 7639ec9755d3ec0ec8cd7c0fdd2c3d3997434870 Author: Marouane El Moufid Date: Sun Aug 23 13:55:48 2026 +0000 ALSA: usb-audio: fix OOB write in snd_usbmidi_novation_output() commit 1035a8f63bae28e498b0e7b5ac91d749844a7158 upstream. snd_usbmidi_novation_output() lays out a two-byte header at transfer_buffer[0..1] and passes &transfer_buffer[2] together with a length of ep->max_transfer - 2 to snd_rawmidi_transmit(): count = snd_rawmidi_transmit(ep->ports[0].substream, &transfer_buffer[2], ep->max_transfer - 2); ep->max_transfer comes from the output endpoint's wMaxPacketSize via usb_maxpacket(). A malformed or malicious device can advertise a bulk OUT endpoint with a wMaxPacketSize of 1 - the USB core only clamps this value downwards - so ep->max_transfer becomes 1 and the count argument becomes -1. snd_rawmidi_transmit() passes the negative count on to __snd_rawmidi_transmit_peek(), where "if (count1 > count) count1 = count" leaves count1 negative; get_aligned_size() keeps it negative for a byte-stream substream, so the following memcpy(buffer, ..., count1) runs with a (size_t)-1 length and writes far past the transfer buffer, which was allocated with usb_alloc_coherent(ep->max_transfer). This is the same class of bug that was fixed for snd_usbmidi_akai_output() in commit 0970274613fb ("ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output()"); the novation output routine was left unguarded. Bail out when the endpoint cannot hold the two-byte header plus at least one payload byte. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Marouane El Moufid Link: https://patch.msgid.link/178749334830.543645.13722252148340572274@espilon.net Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit b810896d6018324e6197aa4082bd8d054d77207b Author: Griffin Kroah-Hartman Date: Wed Jul 22 10:17:39 2026 +0200 usb: core: Strengthen error handling in hub_hub_status() commit a29496745aa335d97f617385809583241e118610 upstream. Add additional error handling after the call to get_hub_status() in hub_hub_status(). get_hub_status() uses usb_control_msg() which does not verify that the message is the correct length, substituting it for usb_control_msg_recv() would also solve this issue but increase memory allocations. Instead, error handling is copied from the method used in hub_ext_port_status(), which shares the same flow of logic as hub_hub_status(). Assisted-by: gkh_clanker_t1000 Signed-off-by: Griffin Kroah-Hartman Link: https://patch.msgid.link/20260722-usb_core_patches_2-v3-1-87622252bfdd@kroah.com Signed-off-by: Greg Kroah-Hartman commit bf2288583b4e072bdff17a233963619e4bc7a8b5 Author: Griffin Kroah-Hartman Date: Mon Jul 13 17:43:53 2026 +0200 usb: core: Add lock to usb_wakeup_notification() commit e263e18a9e7b1ff3e7301f0801c6ff87c31adfb6 upstream. Add a spin lock to usb_wakeup notification to prevent a race condition with dereferencing freed memory. This could be hit by the xHCI driver as it calls this function from an IRQ and could race with the hub_disconnect() function, which properly grabs this lock to protect the state of the device. Assisted-by: gkh_clanker_t1000 Signed-off-by: Griffin Kroah-Hartman Link: https://patch.msgid.link/20260713-usb_core_patches_1-v1-3-7721c2b33f53@kroah.com Signed-off-by: Greg Kroah-Hartman commit 7d23489f51109e3ebba5b5db8c5f0185af7b7fdf Author: Christian Borntraeger Date: Tue Aug 11 17:37:36 2026 +0200 KVM: s390: vsie: zero stale crypto bits commit 34d5b5b646c91cfb9338d7a12c955a70ffb8c66b upstream. When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits. Fixes: 6b79de4b056e ("KVM: s390: vsie: allow guest FORMAT-1 CRYCB on host FORMAT-2") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger Reviewed-by: Claudio Imbrenda Signed-off-by: Claudio Imbrenda Message-ID: <20260811153738.206885-3-borntraeger@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman commit ca1a361e9e82fc5a18c53c2b6d016dfdd6f9d604 Author: Bartosz Golaszewski Date: Mon Jun 22 15:18:09 2026 +0200 crypto: qce - Remove unsafe/deprecated algorithms commit 7e28b0a5c4b7d075b98ce6d8f5290a9d3deb5b92 upstream. Remove algorithms that are either unsafe or deprecated and have no in-kernel users that cannot be served by the ARM CE implementations. AES-ECB reveals plaintext patterns (identical plaintext blocks produce identical ciphertext blocks) and should not be exposed as a hardware- accelerated primitive. DES, Triple DES and HMAC-SHA1 have been deprecated for years. Remove sha1, ecb(aes), ecb(des), cbc(des), ecb(des3_ede), cbc(des3_ede), hmac(sha1) and all AEAD variants built on these primitives as well as authenc(hmac(sha256),cbc(des)). Also clean up the - now dead - code, flags and constants. Cc: stable@vger.kernel.org Acked-by: Eric Biggers Tested-by: Kuldeep Singh Signed-off-by: Bartosz Golaszewski Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit da14fae5203b72ca71ccfa9af8de9249e40d533a Author: Thorsten Blum Date: Sun Jun 21 21:26:16 2026 +0200 crypto: mxs-dcp - fix source scatterlist length access commit c5bcb084a9871e5b62afb5f48b60adfa13b5d9f8 upstream. mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid and could return zero or a stale DMA length, causing encryption and decryption to process the wrong number of bytes when CONFIG_NEED_SG_DMA_LENGTH=y. Use the original scatterlist length instead. Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Reviewed-by: Frank Li Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 002f1f99aef7ea631cb687fc17bce64e4963f6aa Author: Md Sadre Alam Date: Fri Aug 7 12:24:54 2026 +0530 crypto: qce - fix CCM AAD buffer underallocation commit 7f2345f47dd189625f657cd72437179ab4170ee1 upstream. The AAD buffer allocated in qce_aead_ccm_prepare_buf_assoclen() can be smaller than the length later programmed into the DMA scatterlist. The allocation size is currently calculated as: ALIGN(assoclen, 16) + MAX_CCM_ADATA_HEADER_LEN while the DMA length is set to: ALIGN(assoclen + adata_header_len, 16) Since ALIGN() does not distribute over addition, the allocation can be smaller than the DMA length. For example, when assoclen = 32 and adata_header_len = 2: allocation = ALIGN(32, 16) + 6 = 38 DMA length = ALIGN(32 + 2, 16) = 48 As a result, the QCE hardware can read beyond the allocated buffer while computing the CBC-MAC over the associated data. The extra bytes are folded into the authentication tag, resulting in an incorrect tag and causing CCM self-test failures such as: alg: aead: ccm-aes-qce encryption test failed (wrong result) on test vector 8 Fix the allocation by adding the maximum possible AAD header length before alignment: ALIGN(assoclen + MAX_CCM_ADATA_HEADER_LEN, 16) This guarantees that the allocated buffer is large enough for the fully padded AAD data for all supported header sizes. Cc: stable@vger.kernel.org Fixes: 9363efb4181c ("crypto: qce - Add support for AEAD algorithms") Signed-off-by: Md Sadre Alam Reviewed-by: Bartosz Golaszewski Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 1f7b304b55779f302d456cbd219ae73e5f5ebb76 Author: Thorsten Blum Date: Thu Jun 11 12:36:35 2026 +0200 crypto: atmel-tdes - use scatterlist length before DMA mapping commit ba199bdaa80b09a7dd92f28751de7f3dbb06c510 upstream. Using sg_dma_len() is only valid after mapping the scatterlist with dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping to compare input/output lengths and to compute the transfer count. Use the original scatterlist lengths before DMA mapping to avoid reading stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y. Drop the output scatterlist length in the fast path since it is equal to ->in_sg->length and does not change the transfer count. Fixes: 13802005d8f2 ("crypto: atmel - add Atmel DES/TDES driver") Fixes: 1f858040c2f7 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit bb474dcd9d0224264a27a60891f00872b879835f Author: Eric Biggers Date: Mon Jun 8 17:58:47 2026 +0000 crypto: qcom-rng - Remove crypto_rng interface commit 2ecdf5c9910e20f73639bc322f0518a3439d17c0 upstream. qcom-rng.c exposes the same hardware through two completely separate interfaces, crypto_rng and hwrng. However, the implementation of this is buggy because it permits generation operations from these interfaces to run concurrently with each other, accessing the same registers. That is, qcom_rng_generate() synchronizes with itself but not with qcom_hwrng_read(). This results in potential repetition of output from the RNG, output of non-random values, etc. Fortunately, there's actually no point in hardware RNG drivers implementing the crypto_rng interface. It's not actually used by anything besides the "rng" algorithm type of AF_ALG, which in turn is not actually used in practice. Other crypto_rng hardware drivers are likewise being phased out, leaving just the hwrng support. Thus, remove it to simplify the code and avoid conflict (and confusion) with the hwrng interface which is the one that actually matters. Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Reviewed-by: Dmitry Baryshkov Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 813e6718a199befc4f26f54bdd899fbfa11515e5 Author: Eric Biggers Date: Mon Jun 8 17:58:46 2026 +0000 crypto: qcom-rng - Allow zero as a random number commit 4ef04bdc0c9f98836d1638be516f6bf1bad55f69 upstream. Zero is a valid random number and needs to be allowed. Otherwise the output is distinguishable from random. Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 34455bbab8db943618edbc3709928a00851167f5 Author: Eric Biggers Date: Mon Jun 8 17:58:45 2026 +0000 crypto: qcom-rng - Enable clock in hwrng case commit 0fd97bbda2842d7dcccee599ac2c0e9554bdddbc upstream. Fix qcom-rng.c to enable the clock before accessing the hardware. Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 45fec72da424e3121e075bc535500e22b945a199 Author: Eric Biggers Date: Mon Aug 3 11:04:26 2026 -0700 mm/swap: reject swapon() on filesystem-level encrypted files commit c310a8932a3107c9bc8f01d473e9d085f8aa9c98 upstream. ext4 and f2fs don't prevent filesystem-level encrypted files from being set up directly as swap files. In this case, encryption is bypassed. No one should be doing this, vs. the methods of encrypted swap that actually do work (such as swapping to a dm-crypt device, or swapping to a loopback device on top of a filesystem-level encrypted file). Nevertheless, to prevent user error, make swapon() explicitly reject this case. Document this behavior in fscrypt.rst as well. Link: https://lore.kernel.org/20260803180426.3123-1-ebiggers@kernel.org Fixes: 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support") Fixes: f424f664f0e8 ("f2fs crypto: add encryption policy and password salt support") Signed-off-by: Eric Biggers Reviewed-by: Baoquan He Reviewed-by: Muhammad Usama Anjum Reviewed-by: "Darrick J. Wong" Cc: Barry Song Cc: Chris Li Cc: Kairui Song Cc: Kemeng Shi Cc: Nhat Pham Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit df86c0e84025be8b6dd572a20852698927aa666b Author: Fourie Zhang Date: Mon Aug 10 19:35:01 2026 +0800 netfilter: nf_tables: don't queue packet path object notifications commit 7904b94768e983bcb2be34a8d6d1f3450f5b838b upstream. All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same lines apply. nft_obj_notify() is exported and reached from the packet path. Its only in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68), which notifies with GFP_ATOMIC while evaluating a rule for a transiting packet, holding no mutex. Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple notifications into one skbuff") that notification is no longer sent immediately. __nft_obj_notify() queues it onto nft_net->notify_list via nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare list_add_tail(). notify_list has no lock of its own (include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex: the six other enqueue sites all run inside a netlink transaction, and the drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held. Sending packets through a chain that references a depleted quota object therefore races an unlocked list_add_tail() against list_del() + kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add() then stores through an sk_buff that has already been freed: BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0 Write of size 8 at addr ff110001047183c0 by task poc/76 CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4 Call Trace: __nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191 net/netfilter/nf_tables_api.c:1211 net/netfilter/nf_tables_api.c:8743) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain_inet nf_hook_slow __ip_local_out ip_push_pending_frames udp_send_skb udp_sendmsg __x64_sys_sendto Allocated by task 77: __alloc_skb (net/core/skbuff.c:704) __nft_obj_notify (include/net/netlink.h:1055 net/netfilter/nf_tables_api.c:8731) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain Freed by task 79: nf_tables_commit (include/linux/skbuff.h:1332 net/netfilter/nf_tables_api.c:10759 net/netfilter/nf_tables_api.c:11185) nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574) netlink_unicast netlink_sendmsg The buggy address belongs to the cache skbuff_head_cache of size 232 Queueing from the packet path is wrong even leaving the race aside: notify_list is only drained by nft_commit_notify() from nf_tables_commit() (:11185), so a notification enqueued outside a transaction is not sent until some later netlink batch commits, if one ever does. The gfp argument that nft_obj_notify() still takes is a leftover of the pre-67cc570edaa0 behaviour, where this path called nfnetlink_send() directly. Restore that: split the message construction out into nft_obj_notify_alloc() and let each caller decide what to do with the skb. nft_obj_notify(), the exported one reached from the packet path, sends it straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps queueing it, so transaction notifications are still coalesced. Fixes: 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple notifications into one skbuff") Cc: stable@kernel.org Reported-by: TencentOS Corvus AI Assisted-by: tencentos-corvus-ai:kimi-k3 Signed-off-by: Fourie Zhang Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 2a7c2f00843225d5f037676bca649321f3d024c7 Author: Kyle Zeng Date: Mon Aug 10 14:41:14 2026 +0000 vxlan: keep the last remote linked during FDB flush commit d5d4a7b538b52db63927773a8905fcd9f78a42e2 upstream. A non-nexthop FDB entry is expected to have at least one remote while it remains reachable through the FDB hash table. A filtered bulk flush violates this invariant when every remote matches: It unlinks the last remote in vxlan_fdb_dst_destroy() and only afterwards tells vxlan_flush() to destroy the parent FDB entry. An RCU reader can find the parent during this interval. first_remote_rcu() then applies list_entry_rcu() to the empty list head, producing an invalid remote pointer that the receive learning path can read from and write to. When a matching remote is the sole remaining remote, leave it linked and ask the caller to destroy the entire FDB entry. vxlan_fdb_destroy() keeps the remote attached while sending the deletion notification and removing the parent from the lookup structures. Fixes: c499fccb71cb ("vxlan: vxlan_core: Support FDB flushing by destination VNI") Cc: stable@vger.kernel.org Signed-off-by: Kyle Zeng Co-developed-by: David Lee Signed-off-by: David Lee Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260810144115.821654-1-david.lee@trailofbits.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit da1f5aa7ec93f2cc17f5cd30efc54f62af433cf2 Author: Kyle Zeng Date: Mon Aug 17 08:49:54 2026 +0000 batman-adv: reject unrepresentable multicast TVLV offsets commit f12c2de4f542e3220e17e0606f492110064f04cb upstream. The network and transport header fields in struct sk_buff are 16-bit offsets from skb->head, and U16_MAX is reserved as the unset transport header value. batadv_tvlv_call_handler() sets both fields from a received multicast TVLV without checking whether the TVLV end is representable. If the end offset exceeds the field's range, skb_set_transport_header() truncates it so that the transport header precedes the network header. The negative difference is then returned by skb_network_header_len() as a large u32. batadv_mcast_forw_packet() consequently accepts an oversized multicast tracker and accesses memory beyond the skb data. Add skb_set_transport_header_careful(), an offset-aware counterpart to skb_reset_transport_header_careful(), which validates the final head-relative offset before assigning it. Use the new helper in batadv_tvlv_call_handler() and reject unrepresentable TVLVs before setting the network header. Fixes: 07afe1ba288c ("batman-adv: mcast: implement multicast packet reception and forwarding") Cc: stable@vger.kernel.org Signed-off-by: Kyle Zeng Co-developed-by: David Lee Signed-off-by: David Lee Acked-by: Sven Eckelmann Link: https://patch.msgid.link/20260817084955.944189-1-david.lee@trailofbits.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 0e3f01fe2e704e76af4385b8a1742641885a191c Author: Kyle Zeng Date: Mon Aug 17 08:58:38 2026 +0000 ipv6: seg6: clear IPv4 control block on IPIP decapsulation commit 44930446dde45a7a90fe1446fa38eb0e2c561646 upstream. End.DX4 and End.DT4 decapsulate an IPv4 packet through decap_and_validate() and send it directly to IPv4 routing. The inner packet therefore bypasses ip_rcv_core(), which normally clears IPCB before IPv4 interprets skb->cb. The skb instead retains IP6CB data from the outer packet. IP6CB and IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and ts. The sender can make the stale optlen byte nonzero with a valid outer extension-header chain. The reproducers put an eight-byte Destination Options header immediately after the 40-byte IPv6 header and before the Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled Destination Options offset in both lastopt and nhoff, setting them to 40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees optlen = 40 and rr = 40. Both tcp_v4_save_options() and __ip_options_echo() skip option copying when optlen is zero. Here optlen is 40, so the TCP SYN path allocates room for 40 bytes of option data and calls __ip_options_echo(). The stale rr value makes that function read inner packet byte 41 as the Record Route option length. The reproducers set that sender-controlled byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte option-data area. Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5 kernel both produced: BUG: KASAN: slab-out-of-bounds in __ip_options_echo() Write of size 255 The relevant End.DX4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dx4_finish input_action_end_dx4 The relevant End.DT4 call path is: __ip_options_echo tcp_v4_route_req tcp_conn_request tcp_v4_conn_request tcp_rcv_state_process tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish ip_local_deliver input_action_end_dt4 tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so it does not appear as a separate frame. When decap_and_validate() handles IPPROTO_IPIP, save the ingress interface from IP6CB, clear IPCB, and restore the saved value. Doing this in the common decapsulation path covers End.DX4, End.DT4, and End.DT46's IPv4 arm. Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after l3mdev processing, which can replace skb_iif with the L3 master; IP6CB iif still records the receiving interface set at IPv6 ingress. Fixes: 891ef8dd2a8d ("ipv6: sr: implement additional seg6local actions") Cc: stable@vger.kernel.org Suggested-by: Andrea Mayer Signed-off-by: Kyle Zeng Co-developed-by: David Lee Signed-off-by: David Lee Reviewed-by: Andrea Mayer Link: https://patch.msgid.link/20260817085839.946321-1-david.lee@trailofbits.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 3a0ad4fcdfa0b7dba1876de14a12cb65c8b5ca50 Author: Norbert Szetei Date: Wed Aug 26 11:12:27 2026 +0200 net: bridge: mcast: fix use-after-free of a master VLAN's multicast context commit 50e5c6605cc9c2dd57bd2d1b3459674d19738983 upstream. br_multicast_toggle_one_vlan() clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before stopping a VLAN's multicast context. That is the teardown handshake: lockless readers gate on the flag through br_multicast_ctx_should_use() -> br_multicast_ctx_vlan_disabled(), so once it is cleared under the lock no reader can arm the context again. For a master VLAN the handshake never runs. __vlan_del() clears BRIDGE_VLAN_INFO_BRENTRY before calling br_vlan_put_master(), so br_multicast_toggle_one_vlan(masterv, false) returns early on !br_vlan_is_brentry(vlan): the flag stays set and br->multicast_lock is never taken. br_vlan_put_master() then drains the context in br_multicast_ctx_deinit() and frees the VLAN through call_rcu(), while a reader still inside rcu_read_lock() sees the context as enabled and re-arms it. The port and port-VLAN branch of the function has no br_vlan_is_brentry() test and flips the flag under br->multicast_lock, so it is not affected. The reader is the bridge transmit path. For a master VLAN br_multicast_rcv() selects brmctx = &vlan->br_mcast_ctx with pmctx = NULL, so IGMP sent to the bridge device re-arms the context's timers after br_multicast_ctx_deinit() has already stopped them. BUG: KASAN: slab-use-after-free in detach_if_pending+0x412/0x4a0 Write of size 8 at addr ffff88810ac39918 by task brmc/601 __mod_timer+0x51a/0xc50 br_multicast_host_join+0x25b/0x390 __br_multicast_add_group+0x468/0x530 br_ip4_multicast_add_group+0x1a0/0x260 br_multicast_rcv+0x2cda/0x61e0 br_dev_xmit+0x6c4/0x1540 Allocated by task 610: br_vlan_add+0x111/0xb40 br_vlan_info+0x370/0x3e0 Freed by task 0: kfree+0x1a7/0x4f0 rcu_core+0x7dc/0x10a0 Only test br_vlan_is_brentry() when enabling, like the br_multicast_ctx_vlan_global_disabled() test next to it. Disabling then always clears BR_VLFLAG_MCAST_ENABLED under br->multicast_lock before br_multicast_ctx_deinit() drains the context. Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control") Cc: stable@vger.kernel.org Signed-off-by: Norbert Szetei Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/D400F6C7-543A-4B79-9E5B-D1D8974DE5C9@doyensec.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 71cdc4bb7aa7da63f10e1e28947e198e28772aca Author: Zihan Xi Date: Mon Aug 17 19:09:56 2026 +0000 xfrm: bound nat keepalive state collection commit 4e9442ce551ebd84b52ad649df721e2dc28af95a upstream. The v1 nat keepalive fix allocates a GFP_ATOMIC object for every state while collecting references for phase two. This makes the worker's temporary memory use depend on the number of states and lets -ENOMEM abort the scan. Replace the allocated list with a fixed-size batch. When the batch is full, return a private walk status so xfrm_state_walk() leaves a cursor; drain the references after the walk releases xfrm_state_lock and resume from the cursor. This bounds temporary memory use and avoids the allocation failure path. The v1 fix also moved nat_keepalive_send() out of the walk callback. Keep the phase-two drain BH-disabled, as required by local_lock_nested_bh() used by the keepalive sockets. Fixes: 763fe700b7c5 ("xfrm: avoid lock inversion in nat keepalive work") Cc: stable@vger.kernel.org Cc: Eyal Birger Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 71d42da01740ec6557837bebec0bc48cfc3b4c39 Author: Zihan Xi Date: Tue Jul 28 01:30:32 2026 +0800 xfrm: fix xfrm_state_construct() auth-trunc leak commit c12cbf56320fb633484ee0ca1fb7d68d6b64b213 upstream. attach_auth_trunc() can allocate x->aalg while leaving x->props.aalgo at zero when the selected auth algorithm has no sadb_alg_id. One real case is cmac(aes). xfrm_state_construct() then treats !x->props.aalgo as "no auth algorithm attached yet" and calls attach_auth(). That overwrites x->aalg and loses the first allocation. Any later failure or teardown only frees the replacement pointer. Check whether x->aalg is already attached instead of inferring that state from x->props.aalgo. Fixes: 4447bb33f094 ("xfrm: Store aalg in xfrm_state with a user specified truncation length") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 1516e31ac458a738be485620579d8f7fb2700fcb Author: Asim Viladi Oglu Manizada Date: Thu Jul 23 09:35:48 2026 +0000 xfrm: ah6: validate routing header segments_left commit 7bad4bda74dc4713f398d3b7624ff05478e3a568 upstream. AH6 rearranges routing-header addresses before computing or verifying the ICV. ipv6_rearrange_rthdr() assumes that segments_left is not larger than the number of addresses described by the routing header's hdrlen field. That assumption does not hold for raw IPv6 HDRINCL packets. A packet with hdrlen equal to 2 describes one address, but can carry an arbitrary segments_left value. With segments_left equal to 255, the function moves its address pointer 4,064 bytes backwards and passes a 4,064-byte length to memmove(), resulting in an out-of-bounds access. Validate the invariant locally before modifying the routing header or performing any address-pointer arithmetic, and propagate malformed-header errors to the existing AH6 input and output error paths. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix Signed-off-by: Asim Viladi Oglu Manizada Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit ea09210462316e5235a25eccb11ad0708d86615e Author: Zihan Xi Date: Tue Jul 21 23:25:42 2026 +0800 xfrm: avoid lock inversion in nat keepalive work commit 763fe700b7c58ad64fe5202c5638848244dd4127 upstream. nat_keepalive_work() walks the state table while xfrm_state_walk() holds net->xfrm.xfrm_state_lock. Its callback then acquires x->lock, which conflicts with the delete path taking the same locks in reverse order via xfrm_state_delete() and __xfrm_state_delete(). This creates an AB-BA deadlock that is reported by lockdep when a NAT keepalive worker races with SA deletion. Fix this by splitting the keepalive walk into two phases. First, collect the candidate states while the walk holds xfrm_state_lock and take a reference on each state. Then, after the walk completes, process each collected state and acquire x->lock without nesting it under xfrm_state_lock. Fixes: f531d13bdfe3 ("xfrm: support sending NAT keepalives in ESP in UDP states") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit c296d25efbc840be24de83f56d43bc47e714ace9 Author: Zhiling Zou Date: Sat Jul 18 15:12:50 2026 +0800 xfrm: drop ESP-in-TCP packets with no ingress device commit e1d7c5ac1c246ce5775f604515de0a59fbf2116e upstream. ESP-in-TCP receives records through the TCP strparser. handle_esp() restores skb->dev from the saved skb_iif before passing the packet into the XFRM input path. Queued TCP data can be processed after the original ingress device has been removed, for example during veth or net namespace teardown. In that case dev_get_by_index_rcu() returns NULL. The XFRM IPv4 and IPv6 input paths both expect skb->dev to be valid while building the route lookup, so queued ESP-in-TCP data can dereference a NULL device. Drop the packet if the saved ingress device can no longer be resolved. Such a packet can no longer be routed through the normal XFRM receive path, and this preserves the existing behaviour for packets whose ingress device still exists. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Assisted-by: Codex:gpt-5.4 Reviewed-by: Ren Wei Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 4b31a875693c480c611519faca46216514e3e052 Author: Sabrina Dubroca Date: Thu Jul 16 22:54:59 2026 +0200 xfrm: espintcp: fix UAF during close commit deb232e884877bf10b4ce2580909eedec986c284 upstream. ZDI reported and analyzed a race condition during close for espintcp sockets: espintcp_close() frees emsg->skb via kfree_skb() without holding any socket lock. Concurrently, the xfrm_trans_reinject work queue invokes esp_output_tcp_finish() -> espintcp_push_skb() -> espintcp_push_msgs() -> skb_send_sock_locked(), which reads the same skb as a data source. Fix this by adding a synchronize_rcu() call after resetting sk_prot, since esp_output_tcp_finish() runs under RCU and won't use a socket with sk_prot == &tcp_prot. Simply taking the socket lock in espintcp_close() could lead to leaks, if esp_output_tcp_finish() re-adds an skb in the slot we just freed. After this, the existing barrier() is no longer needed. Cc: stable@vger.kernel.org Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Reported-by: zdi-disclosures@trendmicro.com Signed-off-by: Sabrina Dubroca Reviewed-by: Breno Leitao Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 84a93b4e012587d0a4a84ffb23ec6da18e9d85f9 Author: Hyunwoo Kim Date: Mon Aug 17 06:28:42 2026 +0900 net/tcp-ao: fix use-after-free of current_key on reconnect to another peer commit da4471557f279d0f56605158a625bb6e49ef7d41 upstream. tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken, with only rcu_read_lock() held. On the fast path for established sockets, if the rnext_keyid sent by the peer differs from current_key->sndid, the key the peer asked for is looked up and stored in current_key. The lookup is inside the RCU read side, but current_key outlives it. When the socket is disconnected and connect() is called again for another peer, tcp_ao_connect_init() unlinks every key that does not match the new peer and frees it with call_rcu(). If current_key points at such a key, it is cleared to NULL. The fast path reads sk_state only once on entry, so a softirq that got into it while the socket was still established can update current_key after that loop has already run. The update is inside the RCU read side, so it comes before the call_rcu() callback, and once the callback frees the key, current_key is left pointing at freed memory. The next transmission picks that pointer up in tcp_get_current_key(). tcp_ao_transmit_skb() then reads the traffic key from the freed object, which is the use-after-free. Wait for one grace period before unlinking, and only if a key is going to be removed. By the time tcp_connect() runs the socket is already in TCP_SYN_SENT, and TCP_AO_ESTABLISHED does not contain TCPF_SYN_SENT, so a softirq entering after the wait cannot reach the fast path, and the ones already in it have finished. The existing NULL handling in the loop is then enough. Fixes: 0a3a809089eb ("net/tcp: Verify inbound TCP-AO signed segments") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim Reviewed-by: Simon Horman Acked-by: Paolo Abeni Link: https://patch.msgid.link/aoIriv3pHDgII2YR@v4bel Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 594ba77210a1f065832211851a2d7e14d11fcbdb Author: Qing Ming Date: Tue Aug 25 15:20:33 2026 +0800 tcp: fix AO info use-after-free in tcp_ao_connect_init() commit ea30dc5267e367b8a5e1e06cc074f813bcbf18b2 upstream. tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that a key matches the peer and the bound device's current L3 master. tcp_ao_connect_init() later resolves the L3 master again and removes keys which do not match it. The socket lock does not stabilize the bound device's VRF membership. Detaching the device from its VRF between the initial validation and the L3-master calculation in tcp_ao_connect_init() can therefore make the validation succeed while initialization observes the default L3 domain and removes the only key. The subsequent AO lookup then fails, so the no-key path clears tp->ao_info and frees it directly. The receive path can find the socket in the ehash and load tp->ao_info under RCU before acquiring the socket lock. A reader which loaded the old pointer can thus continue into tcp_inbound_ao_hash() after the direct free. The issue was found during a static audit of TCP-AO object lifetime. An unprivileged reproducer in self-created user and network namespaces raced connect() with detaching a veth from its VRF while sending TCP-AO segments. It triggered the same KASAN report on two fresh boots: BUG: KASAN: slab-use-after-free in tcp_inbound_ao_hash+0x585/0x19f0 Write of size 8 at addr ffff88800bf88128 by task tcp_ao_vrf_race/232 Call Trace: tcp_inbound_ao_hash+0x585/0x19f0 tcp_inbound_hash+0x677/0xa80 tcp_v4_rcv+0x1c3e/0x3ab0 Allocated by task 235: tcp_ao_alloc_info+0x43/0xf0 tcp_ao_add_cmd+0xdf7/0x13b0 do_tcp_setsockopt+0x168c/0x2640 Freed by task 235: kfree+0x1b8/0x550 tcp_connect+0x252/0x4f00 tcp_v4_connect+0x1114/0x1720 The bad address is 40 bytes inside the freed 128-byte object, matching the tcp_ao_info counters.key_not_found field. The two runs used 1000 attempts each, reached the no-key path 366 and 411 times, and produced one and two KASAN reports respectively. With this change, the same reproducer reached the no-key path 366 times in 1000 attempts without a KASAN report or oops. Use tcp_ao_destroy_sock() for the no-key path. It unpublishes the AO info, updates the socket memory and static-key accounting, and defers the free until after an RCU grace period. Also drop the WARN_ON_ONCE() and its stale comment. The VRF detach race makes the no-key state reachable during normal operation, so it is a handled condition rather than an impossible assertion. On panic_on_warn kernels the WARN would turn this handled race into a kernel panic. Fixes: 248411b8cb89 ("net/tcp: Wire up l3index to TCP-AO") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5 Signed-off-by: Qing Ming Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260825072033.6921-1-a0yami@mailbox.org Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit e477275951de194bda44cce081009a7fbff82e27 Author: Rastislav Szabo Date: Sat Aug 22 22:11:18 2026 +0200 net/tcp: fix TCP-AO key deletion in VRFs commit 94ad9e114a1c7b16ea418c1456ac3835e038ab3f upstream. TCP-AO keys with TCP_AO_KEYF_IFINDEX store the VRF L3 interface index in l3index. tcp_ao_del_cmd() validates the supplied ifindex, but does not assign it to its local l3index before matching keys. As a result, deleting a key scoped to a non-default VRF always fails with ENOENT because it is matched against l3index 0. Fixes: 248411b8cb89 ("net/tcp: Wire up l3index to TCP-AO") Cc: stable@vger.kernel.org Signed-off-by: Rastislav Szabo Reviewed-by: David Ahern Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20260822201119.272269-1-rastislav.szabo@isovalent.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit efb867f04917f09c5227981a5312fb04b772cada Author: Pratik Vishwakarma Date: Wed Jul 29 05:54:59 2026 +0000 x86/CPU/AMD: Carve out a Zen5 models range commit 52075128273ace53e6254e37899a47d40d4baf45 upstream. Family 0x1a, model 0xd0..0xd7 belongs to the Zen5 generation. Carve it out from the larger, Zen6 range where former doesn't belong. [ bp: Rewrite commit message, add tags. ] Fixes: b5f53e6d3d32 ("x86/CPU/AMD: Add more Zen6 models") Signed-off-by: Pratik Vishwakarma [ bp: Backport only the Zen5 bits. ] Signed-off-by: Borislav Petkov (AMD) Cc: Link: https://patch.msgid.link/20260729055459.15904-1-Pratik.Vishwakarma@amd.com Signed-off-by: Greg Kroah-Hartman commit 5f77ddb2756340c1b05381674ca025d52998005e Author: Qing Ming Date: Tue Aug 18 23:00:00 2026 +0800 gtp: serialize PDP context updates commit 498386b6d402737db1e2eeed4c385acbf0ef9e34 upstream. PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp] RBP: dead000000000122 The second deletion dereferenced the poisoned hlist pprev pointer. Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a shared mutex. Keep the mutex held until the final use of a PDP context in the NEWPDP path, and keep the RCU read-side section around the complete PDP context use in the DELPDP path. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Cc: stable@vger.kernel.org Signed-off-by: Qing Ming Link: https://patch.msgid.link/20260818150000.7670-1-a0yami@mailbox.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b7f10d4ff987bda038df90052cd4a1434a7412d4 Author: Jiayuan Chen Date: Sun Aug 23 16:47:56 2026 +0800 tls: device: fix out-of-bounds write in tls_append_frag() commit b17cf742eaad70ae29ac558cefb3aa9bbeea03d4 upstream. Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Jiayuan Chen Link: https://patch.msgid.link/20260823084758.20936-1-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 2efbfd42441d3ef8137aff2d59e9835e1d5ae780 Author: Shuangpeng Bai Date: Fri Aug 7 02:07:33 2026 -0400 usb: gadget: f_tcm: keep port count until LUN teardown completes commit c39d0916da47d94909391876c9e5bd429ea7b1b9 upstream. tcm_usbg_drop_nexus() permits session removal once tpg_port_count reaches zero. However, usbg_port_unlink() currently decrements that count from the fabric_pre_unlink() callback, before core_dev_del_lun() waits for active se_lun references to drain. If removal of the last LUN races a nexus removal, the latter can observe a zero port count and call target_remove_session(). This frees sess_cmd_map while an in-flight struct usbg_cmd, including its work item, can still be accessed. Overlapping the last-LUN unlink with nexus removal reproduces this lifetime violation as a DEBUG_OBJECTS "free active" warning for usbg_cmd_work, followed by a target-core BUG/Oops. The generic target-core unlink path has no callback after core_dev_del_lun() completes. Add an optional fabric_post_unlink() callback and use it for the f_tcm port count. The count now remains nonzero until core_dev_del_lun() has finished draining active LUN references, preventing nexus removal from freeing the session during command completion. Fixes: c52661d60f63 ("usb-gadget: Initial merge of target module for UASP + BOT") Cc: stable@vger.kernel.org Signed-off-by: Shuangpeng Bai Link: https://patch.msgid.link/20260807060733.3186624-1-shuangpeng.kernel@gmail.com Signed-off-by: Greg Kroah-Hartman commit 48a4e549b8dfbc03749b67760dd2b1c278e508a9 Author: Aleksandr Nogikh Date: Thu Aug 6 15:26:51 2026 +0000 usb: usbtest: disable dynamic ID support commit 00e2071f6d5621a5ddea311a5e6b143ae6e474af upstream. The usbtest driver relies on the driver_info field of struct usb_device_id to point to a valid struct usbtest_info descriptor. This structure contains essential test configurations, such as endpoint addresses and test modes, which are required during probe. When a user dynamically adds a new device ID via the sysfs new_id interface without specifying a reference device, the USB core initializes driver_info to 0 (NULL). When a matching device is subsequently probed, usbtest_probe() unconditionally casts driver_info to a struct usbtest_info pointer and dereferences it, leading to a NULL pointer dereference crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:usbtest_probe+0x3b9/0x1280 drivers/usb/misc/usbtest.c:2822 Because usbtest strictly requires pre-defined usbtest_info descriptors to function, dynamic ID binding via sysfs is fundamentally unsupported for this driver. Fix this by setting .no_dynamic_id = 1 on usbtest_driver. This instructs the USB core to skip creating the new_id and remove_id sysfs interfaces for usbtest, preventing invalid dynamic ID entries from being created. Cc: stable@vger.kernel.org Reported-by: syzbot+7e1e5911f9eac50bedc7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7e1e5911f9eac50bedc7 Signed-off-by: Aleksandr Nogikh Tested-by: syzbot@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260806152651.2370795-1-nogikh@google.com Signed-off-by: Greg Kroah-Hartman commit 7288c279ddbd654a06c82118c1a3f5570c1807f0 Author: Baokun Li Date: Mon Aug 17 23:18:01 2026 +0800 fuse: fix invalidate lock leak on open O_TRUNC DAX failure commit a927f1867e61b78f39f9da0bbba3c98c2ca151fe upstream. fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() # dax_truncate └─ fuse_dax_break_layouts() └─ dax_break_layout() └─ wait_page_idle() # TASK_INTERRUPTIBLE └─ fuse_wait_dax_page() # unlock, schedule, re-lock └─ signal → -ERESTARTSYS goto out_inode_unlock # <- lock leaked Fix this by moving filemap_invalidate_unlock() below the label so that all error paths release the lock, and rename the label to out_unlock as it now covers more than just the inode lock. Fixes: 2fdbb8dd0155 ("fuse: fix deadlock between atomic O_TRUNC and page invalidation") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Baokun Li Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit ea9fea370b8de4ffd72e0ef89550415c15637787 Author: Baokun Li Date: Mon Aug 17 23:18:00 2026 +0800 fuse: fix invalidate lock leak on setattr writeback failure commit 9afeca0d569c9fc89d758fe7a9339d1e8afb1546 upstream. fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ notify_change() # KILL_SUID -> ATTR_MODE └─ fuse_setattr() # no killpriv: │ # ia_valid |= ATTR_MODE └─ fuse_do_setattr() ├─ filemap_invalidate_lock() # IS_DAX && is_truncate └─ write_inode_now() # is_wb && ATTR_MODE └─ if (err) # e.g. daemon -> -EIO return err # <- lock leaked Fix this by adding an unlock label that releases the lock before returning the error, and use it for the fuse_dax_break_layouts() failure path as well. Fixes: 6ae330cad6ef ("virtiofs: serialize truncate/punch_hole and dax fault path") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Baokun Li Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 3c281882d0c47a50699e7fb4450a2a0d2f9876b7 Author: Lucas De Marchi Date: Thu Aug 6 17:21:04 2026 +0300 xhci: dbgtty: Fix unregister on tty_alloc_driver() failure commit 25b8dfc13495a6c1cf4abacc8ef20196c7f20e5c upstream. Make sure to set dbc_tty_driver to NULL to match the check in dbc_tty_exit(). For that, make detached error handling path common to the other branch in the same function. Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable@vger.kernel.org # v5.10 Cc: Mathias Nyman Cc: Greg Kroah-Hartman Signed-off-by: Lucas De Marchi Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 943f976c93e70563b132f5585ff68b08c89641a2 Author: Lucas De Marchi Date: Thu Aug 6 17:21:03 2026 +0300 xhci: dbgtty: Fix unregister on tty_register_driver() failure commit a916fa66a43e10f63198b6ce978badffc678821a upstream. If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_driver_kref_put() -> driver freed (dbc_tty_driver left dangling) ... module_exit(xhci_hcd_fini) xhci_hcd_fini() xhci_dbc_exit() dbc_tty_exit() if (dbc_tty_driver) -> true (dangling) tty_unregister_driver() -> use-after-free Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable@vger.kernel.org # v5.10 Cc: Mathias Nyman Cc: Greg Kroah-Hartman Signed-off-by: Lucas De Marchi Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 65b2f6f79753ca285f6c611e457a67812e31816c Author: Semih Baskan Date: Thu Aug 6 17:21:12 2026 +0300 usb: xhci: Handle USB3 port events when there is one roothub commit 3e91ec3e7d80a327fb558207613c80415d3bf756 upstream. handle_port_status() drops every USB3 port event when xhci->shared_hcd is NULL. The check dates from a time when xhci-plat always created a shared hcd, so a NULL one could only mean the hcd had been removed. Since commit 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") that is no longer true. A controller whose USB2 root hub has no ports gets a single roothub, the USB3 rhub is served by the main hcd, and shared_hcd stays NULL for the lifetime of the device. Every SuperSpeed port event is then thrown away as bogus behind a debug message, so devices never enumerate even though the port sees the device and its change bits stay set: 0x006a1203 Powered Connected Enabled Link:U0 PortSpeed:4 Change: CSC WRC PRC PLC Broadcom Northstar is such a controller. USB3 works there up to 5.15 and stops working from 5.19 onwards. Ask xhci_get_usb3_hcd() instead. It returns the shared hcd when there is one, the main hcd when the USB2 root hub has no ports, and NULL once the shared hcd is gone, which keeps the original meaning of the check. Tested on an Asus RT-N18U (BCM47081), which has a single roothub. Before the change nothing enumerates on the USB3 port; after it SuperSpeed devices enumerate normally over repeated connect and disconnect cycles, the change bits shown above clear, and USB2 is unaffected on both ports. Fixes: 4736ebd7fcaf ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports") Cc: stable@vger.kernel.org Signed-off-by: Semih Baskan Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-17-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit a4bb1242c85890e178c8a1f884e3721eb3328eb6 Author: Haoxiang Li Date: Mon Jun 1 01:08:04 2026 +0200 accessibility: speakup: unregister tty ldisc on later init failures commit a76acbaec9b8fd74413646984d2e3626d0543e39 upstream. The ldisc registration is intentionally non-fatal, since some synth drivers do not use tty/ldisc. However, once speakup_init() continues past the registration point and later fails, the init unwind path should mirror speakup_exit() and call spk_ttyio_unregister_ldisc(). Add the missing unregister call to the error path after synth_release(), matching the normal module exit cleanup order. Signed-off-by: Haoxiang Li Signed-off-by: Samuel Thibault Fixes: e23a9b439ce9 ("staging: speakup: safely register and unregister ldisc") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260531230804.254962-16-samuel.thibault@ens-lyon.org Signed-off-by: Greg Kroah-Hartman commit 198590bcd2ee93a60b3038c873a50de229f72031 Author: Griffin Kroah-Hartman Date: Mon Jul 6 16:58:21 2026 +0200 fpga: dfl: fme: add error handling commit b5ba63e247075087ab8a6a087622c762dc4172e9 upstream. Add error handling to devm_kasprint in fme_perf_pmu_register(). Assisted-by: gkh_clanker_2000 Fixes: 724142f8c42a ("fpga: dfl: fme: add performance reporting support") Cc: stable@kernel.org Cc: Xu Yilun Cc: Tom Rix Cc: Moritz Fischer Signed-off-by: Griffin Kroah-Hartman Signed-off-by: Greg Kroah-Hartman [ Yilun: Fix stable tag, add Fixes tag ] Reviewed-by: Xu Yilun Link: https://lore.kernel.org/r/2026070620-unwired-clay-f6cc@gregkh Signed-off-by: Xu Yilun Signed-off-by: Greg Kroah-Hartman commit bec338b07beb883726b32192c8f01c601bc76fda Author: Jose Villaseñor Montfort Date: Tue Jul 14 23:35:26 2026 -0600 HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() commit db8d634128d2ba88d79c0b601e983ebe14bb0519 upstream. magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming report of up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a panic with CONFIG_VMAP_STACK, or memory corruption without it. A double report only ever wraps two normal reports; it is never legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a recursive call so the recursion depth is bounded to two, while all valid packets keep being parsed exactly as before. Fixes: a462230e16ac ("HID: magicmouse: enable Magic Trackpad support") Link: https://lore.kernel.org/linux-input/20260706181347.700DB1F00A3F@smtp.kernel.org/ Cc: stable@vger.kernel.org Signed-off-by: Jose Villaseñor Montfort Reviewed-by: Alec Hall Tested-by: Alec Hall Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 87ad116ac3abc6f2ce2b5b6c488f633003581eee Author: Chengfeng Ye Date: Wed Aug 26 13:47:55 2026 -0400 Bluetooth: hci_sync: Fix accept list UAF during suspend [ Upstream commit f57b399c4fa1501b2d5451f52d861ece86bcf3db ] hci_update_event_filter_sync() walks hdev->accept_list while sending a synchronous HCI command for each remote-wakeup device. The suspend path holds hdev->req_lock, but accept-list updates are serialized by hdev->lock. Consequently, remove_device() can free the current list entry during the controller wait. The following interleaving causes the use-after-free: hci_update_event_filter_sync() remove_device() fetch accept-list entry hci_set_event_filter_sync() wait for controller response hci_dev_lock() list_del() kfree() hci_dev_unlock() read the freed list.next KASAN reported: BUG: KASAN: slab-use-after-free in hci_suspend_sync+0x835/0x910 Read of size 8 at addr ffff88810bec8440 by task kworker/0:1/10 Workqueue: events vhci_suspend_work Call Trace: hci_suspend_sync+0x835/0x910 hci_suspend_dev+0x182/0x450 process_one_work+0x661/0x1090 worker_thread+0x45b/0xd10 Allocated by task 86: hci_bdaddr_list_add_with_flags+0x1a8/0x400 add_device+0x381/0x820 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 91: kfree+0x131/0x3c0 remove_device+0x429/0xb70 hci_sock_sendmsg+0x1033/0x1ea0 Snapshot the remote-wakeup addresses under hdev->lock. Release the lock before sending HCI commands. Clear the controller event filter before building the snapshot, and skip allocation and the second list traversal when there are no matching entries. This preserves the original filter and scan-state updates without retaining an accept-list node across a controller wait. Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-bluetooth/20260730092331.2069741-1-nicoyip.dev@gmail.com/ Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1cd4bea9cb46dba6f7ec2e54eb966ff90bf3fe70 Author: Zijun Hu Date: Wed Aug 26 13:47:54 2026 -0400 Bluetooth: hci_sync: Use bt_dev_err() to log error message in hci_update_event_filter_sync() [ Upstream commit da0186f19a7433d3d5607b0f61e9a3de17d1f721 ] Use bt_dev_err() instead of bt_dev_dbg() to log error message in hci_update_event_filter_sync(). Signed-off-by: Zijun Hu Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: f57b399c4fa1 ("Bluetooth: hci_sync: Fix accept list UAF during suspend") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e750cdb6de009aace3c77f37fe2173f96175e8e4 Author: Ibrahim Hashimov Date: Wed Aug 26 11:33:13 2026 -0400 HID: uclogic: fix use-after-free of inrange_timer on remove [ Upstream commit 506fd50a9027340f0e9dcc587d10ccb03312dba6 ] uclogic_remove() cancels the pen in-range timer and then stops the device: timer_delete_sync(&drvdata->inrange_timer); hid_hw_stop(hdev); timer_delete_sync() only guarantees the timer is idle at that instant. uclogic_raw_event_pen() keeps delivering pen reports until hid_hw_stop() stops the transport several lines later, and every report with pen->inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE re-arms the timer: mod_timer(&drvdata->inrange_timer, jiffies + msecs_to_jiffies(100)); A report landing between the timer_delete_sync() call and the transport teardown in hid_hw_stop() re-arms inrange_timer after it was cancelled. uclogic_remove() then returns and the devm drvdata is freed, while hid_hw_stop() has already freed the input device drvdata->pen_input points at, so when the timer fires ~100 ms later uclogic_inrange_timeout() dereferences freed memory -- a use-after-free in timer-softirq context. Swapping the two calls is not a fix: stopping the device first frees drvdata->pen_input via hidinput_disconnect() while the timer may still be pending, so a timer already armed before removal fires on the freed input device in the window before timer_delete_sync() runs. Use timer_shutdown_sync() before hid_hw_stop() instead. It cancels the timer, waits for a running callback while pen_input is still valid, and prevents any further re-arming -- a later mod_timer() from an in-flight report is silently ignored -- so the timer is provably dead before hid_hw_stop() frees the inputs. This is the ordering the timer core documents for this "timer re-armed from another path" teardown case. Fixes: 01309e29eb95 ("HID: uclogic: Support in-range reporting emulation") Cc: stable@vger.kernel.org Signed-off-by: Ibrahim Hashimov Assisted-by: AuditCode-AI:2026.07 Signed-off-by: Jiri Kosina [ changed timer_delete_sync() to del_timer_sync() in the removed line to match the pre-rename API on this branch ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5aa5a1b7cc4b4bec5497ad9ef113fdfe37b232f3 Author: Raman Varabets Date: Wed Aug 26 11:24:52 2026 -0400 HID: ft260: fix stack-use-after-return write in I2C read race [ Upstream commit bf3e39df3a397fd82967a31d17c4e02c7feab221 ] ft260_i2c_read() points dev->read_buf at a caller-supplied buffer (often an on-stack variable), arms a completion and waits up to five seconds for the device to return the data. The HID input callback ft260_raw_event() runs in the input/IRQ path, independent of the dev->lock mutex held by the read path, and copies the device-supplied payload into dev->read_buf after a plain NULL check. These two paths share read_buf, read_idx and read_len with no serialization. If the device delays its response until the read times out, ft260_i2c_read() resets the controller, clears read_buf and returns, unwinding the stack frame the buffer lived in. A response that arrives at that moment lets ft260_raw_event() pass the NULL check and then memcpy() the device-controlled payload into the now-freed stack location, a bounded but attacker-influenced stack-use-after-return write triggerable by malicious or malfunctioning hardware. Add a dedicated spinlock that serializes every access to read_buf, read_idx and read_len. ft260_raw_event() now holds it across the NULL check, the memcpy and the index update, while the read path takes it when arming and when clearing the buffer, so the teardown can no longer slip between the check and the copy. Fixes: 6a82582d9fa4 ("HID: ft260: add usb hid to i2c host bridge driver") Cc: stable@vger.kernel.org Signed-off-by: Raman Varabets Reviewed-by: Michael Zaidman Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e951ee73e423f341e4473e8c9d141c674989e22f Author: Michael Zaidman Date: Wed Aug 26 11:24:51 2026 -0400 HID: ft260: validate i2c input report length [ Upstream commit 80c4bbb2b38513e9c3d84805fa61a0ee16d79c45 ] Add two checks to ft260_raw_event() to prevent out-of-bounds reads from malicious or malfunctioning devices: First, reject reports shorter than the 2-byte header (report ID + length fields). Without this, even accessing xfer->length on a 1-byte report is an OOB read. Second, validate xfer->length against the actual data capacity of the received HID report. Each I2C data report ID (0xD0 through 0xDE) defines a different report size in the HID descriptor, so the available payload varies per report. A corrupted length field could cause memcpy to read beyond the report buffer. Reported-by: Sebastián Josué Alba Vives Signed-off-by: Michael Zaidman Signed-off-by: Jiri Kosina Stable-dep-of: bf3e39df3a39 ("HID: ft260: fix stack-use-after-return write in I2C read race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit bdb2e0a2a359e473ca5619e35adee89028697239 Author: Jann Horn Date: Wed Aug 26 10:01:54 2026 -0400 HID: asus: fix missing hid_is_usb() check [ Upstream commit 02bf61dfb44f17ec187d1da1a82495951bbd12df ] to_usb_interface() can only be used on a hid_device whose parent is really USB; uhid can create devices that identify as being on BUS_USB, but don't actually have a USB parent. Fix the use of to_usb_interface() without a hid_is_usb() check. I have verified that it is currently possible to trigger a kernel splat due to this bug in an ASAN build, and that this commit fixes the issue. Fixes: 00e005c952f7 ("hid-asus: check ROG Ally MCU version and warn") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ab7bd22eeca0c8ece39b6d678d6ed4d6e9c47f0d Author: Antheas Kapenekakis Date: Wed Aug 26 10:01:53 2026 -0400 HID: asus: simplify RGB init sequence [ Upstream commit 56d1b33e644cca1bedffbc73d28778ed4ae30f64 ] Currently, RGB initialization forks depending on whether a device is NKEY. However, in reality both initialization forks are the same, other than the NKEY initialization initializing the LED_REPORT_ID1, LED_REPORT_ID2 endpoints, and the non-NKEY initialization having a functionality check which is skipped for the NKEY path. Therefore, merge the if blocks, gate the ID1/ID2 initializations behind the NKEY quirk instead, and introduce the functionality check for NKEY devices (it is supported by them). There should be no functional change with this patch. Acked-by: Benjamin Tissoires Signed-off-by: Antheas Kapenekakis Link: https://patch.msgid.link/20260122075044.5070-2-lkml@antheas.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Stable-dep-of: 02bf61dfb44f ("HID: asus: fix missing hid_is_usb() check") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ad9330f7e74a97842815a291a0d7389ed2f34504 Author: Baul Lee Date: Wed Aug 26 09:47:15 2026 -0400 HID: pidff: fix OOB write when hid->inputs is empty [ Upstream commit 67bb1074e3d2d12fa059a9cc707e89398a4e4704 ] hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the object dev actually aliases, and input_ff_create() adds further writes of a heap pointer and two function pointers. Until hid-universal-pidff the only caller was hid_pidff_init() from usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at least one hid_input. universal_pidff_probe() starts the device with HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls hid_pidff_init_with_quirks() directly whenever the descriptor carries a PID usage page, bypassing that gate. A report descriptor whose only application collection is on HID_UP_PID leaves hid->inputs empty while hid_connect() still succeeds through the hidraw claim, so probe reaches the unguarded list_entry(). The write happens in the USB probe path, on the hotplug workqueue, so plugging in a malicious device is enough to trigger it; no attacker software and no logged-in user are required. KASAN reports an 8-byte out-of-bounds write in hid_pidff_init_with_quirks() reached from universal_pidff_probe(). Check for an empty list before deriving dev and return -ENODEV, as the other HID force-feedback drivers already do. universal_pidff_probe() propagates the error and unwinds. Discovered by XBOW, triaged by Baul Lee Fixes: f06bf8d94fff ("HID: Add hid-universal-pidff driver and supported device ids") Reported-by: Federico Kirschbaum Reported-by: Baul Lee Cc: stable@vger.kernel.org Signed-off-by: Baul Lee Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c6cd31a5e280a521c00f5bf46dbe0a8cafadaee0 Author: Tomasz Pakuła Date: Wed Aug 26 09:47:14 2026 -0400 HID: pidff: clang-format pass [ Upstream commit ae42428fb4e3d2eed344f0d6fcfa778bc8b8f80a ] Signed-off-by: Tomasz Pakuła Signed-off-by: Jiri Kosina Stable-dep-of: 67bb1074e3d2 ("HID: pidff: fix OOB write when hid->inputs is empty") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dc6a6f604dce80c8ea74299743ae878f79a703d2 Author: Tomasz Pakuła Date: Wed Aug 26 09:47:13 2026 -0400 HID: pidff: Use ARRAY_SIZE macro instead of sizeof [ Upstream commit 8de2cef6d0de8cdddee8d653a18791525af26fad ] Could lead to issues when arrays won't be 8 bit fields Signed-off-by: Tomasz Pakuła Reviewed-by: Oleg Makarenko Signed-off-by: Jiri Kosina Stable-dep-of: 67bb1074e3d2 ("HID: pidff: fix OOB write when hid->inputs is empty") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f49fbb6c1353c9a99c74cabef72047f17d49e4da Author: Tomasz Pakuła Date: Wed Aug 26 09:47:12 2026 -0400 HID: pidff: Rework pidff_set_time() to fix warnings [ Upstream commit bed72bd240ce77623845853397b89a08f6dc5770 ] Fixes blank line warning from checkpatch.pl script Signed-off-by: Tomasz Pakuła Signed-off-by: Jiri Kosina Stable-dep-of: 67bb1074e3d2 ("HID: pidff: fix OOB write when hid->inputs is empty") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9b01f5af0dc59263b59391b148bc78d83c0354a9 Author: Bryam Vargas Date: Wed Aug 26 06:57:34 2026 -0400 nfc: nci: add data_len bound checks to activation parameter extractors [ Upstream commit 0428fa2c22e2ba0cff766d3b80d461e149102045 ] nci_extract_activation_params_iso_dep() and nci_extract_activation_params_nfc_dep() read an inner length byte from the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed kernel buffers, but neither function receives the caller-validated activation_params_len. A crafted NCI notification with activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or 50 (NFC-B) causes memcpy() to read that many bytes past the one valid byte in the activation params region -- a slab out-of-bounds read of kernel memory adjacent to the NCI skb. The sibling nci_extract_rf_params_*() family was given equivalent protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter validation for packet data"), but the two activation parameter extractors were not updated at that time. Add a data_len parameter to both functions, guard against an empty region before consuming the inner length byte, decrement the remaining count after consuming it, and clamp the copy length to what is actually available. Update both call sites to pass ntf.activation_params_len, which is already validated against the skb at ntf.c:801. Fixes: e8c0dacd9836 ("NFC: Update names and structs to NCI spec 1.0 d18") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260612-b4-disp-6d52d8b0-v3-1-e26221f8826d@proton.me Signed-off-by: David Heidelberg [ Replaced `NFC_ATS_MAXSIZE` with the literal `20` since that macro doesn't exist in this tree. ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 68aa9ab6f8f2895713aa6ddf781463ed8ea5ba44 Author: Ryusuke Konishi Date: Tue Aug 25 18:05:27 2026 -0400 nilfs2: reject invalid block index in GC ioctl [ Upstream commit a1735eae55448bc79c2da6593455791e886f6ed8 ] Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers(). Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers. As a preparatory step, the GC ioctl loads the page/folio of the block to be moved during GC and inserts it into the page cache based on information in the nilfs_vdesc structure passed as an argument. Normally, this does not cause issues because the user-space GC library configures the nilfs_vdesc structure properly. However, since there is no range check on the parameters determining the page index, a request with artificially crafted parameters -- such as those generated by Syzbot -- can result in a page/folio being inserted with a page index of ULONG_MAX, triggering the above problem. This resolves the issue by checking the ranges of 'vd_offset' and 'vd_vblocknr' in the nilfs_vdesc structure that determine the page index, thereby preventing the invalid page/folio insertions. Reported-by: syzbot+c37bed40868932d790e9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c37bed40868932d790e9 Fixes: 7942b919f732 ("nilfs2: ioctl operations") Cc: wuyankun Cc: stable@vger.kernel.org Signed-off-by: Ryusuke Konishi Signed-off-by: Viacheslav Dubeyko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 44b379a8907659752ef61a06b91682af68bb4998 Author: Ryusuke Konishi Date: Tue Aug 25 18:05:26 2026 -0400 nilfs2: correct return value kernel-doc descriptions for ioctl functions [ Upstream commit 17c46a45cdb94c500f4e93b176cdd61931b03020 ] Patch series "nilfs2: fix kernel-doc comments for function return values", v2. This series fixes the inadequacies in the return value descriptions in nilfs2's kernel-doc comments (mainly incorrect formatting), as well as the lack of return value descriptions themselves, and fixes most of the remaining warnings that are output when the kernel-doc script is run with the "-Wall" option. This patch (of 7): In the kernel-doc comments for functions, there are many cases where the format of the return value description is inaccurate, such as "Return Value: ...", which causes many warnings to be output when the kernel-doc script is executed with the "-Wall" option. This fixes such incorrectly formatted return value descriptions for ioctl functions. Link: https://lkml.kernel.org/r/20250110010530.21872-1-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/20250110010530.21872-2-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Cc: "Brian G ." Signed-off-by: Andrew Morton Stable-dep-of: a1735eae5544 ("nilfs2: reject invalid block index in GC ioctl") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b708aa5cb1422fc97b48f6a2598a87d638ad74c3 Author: DaeMyung Kang Date: Tue Apr 28 23:08:55 2026 +0900 ksmbd: harden file lifetime during session teardown commit a42896bebfcc287ed1e61d820a888e33b1eb80ce upstream. __close_file_table_ids() is the per-session teardown that closes every fp belonging to a session (or to one tree connect on that session) by walking the session's volatile-id idr. The current loop has three related problems on busy or racing workloads: * Sleeping under ft->lock. The session-teardown skip callback, session_fd_check(), already sleeps in ksmbd_vfs_copy_durable_owner() -> kstrdup(GFP_KERNEL) and down_write(&fp->f_ci->m_lock) (a rw_semaphore). Running the callback inside write_lock(&ft->lock) trips CONFIG_DEBUG_ATOMIC_SLEEP / CONFIG_PROVE_LOCKING on a durable-fd workload. * Refcount accounting blind to f_state. The unconditional atomic_dec_and_test(&fp->refcount) does not distinguish FP_INITED (idr-owned reference still intact) from FP_CLOSED (an earlier ksmbd_close_fd() already consumed the idr-owned reference while leaving fp in the idr because a holder kept refcount non-zero). When the latter races with teardown the same path over-decrements into a holder reference and ksmbd_fd_put() later UAFs that holder. * FP_NEW window. Between __open_id() publishing fp into the session idr and ksmbd_update_fstate(..., FP_INITED) committing the transition at the end of smb2_open(), an fp is in FP_NEW and an intervening teardown that takes a transient reference and unpublishes the volatile id leaves the original idr-owned reference orphaned -- the opener is unaware that fp has been unpublished, returns success to the client, and the fp leaks at refcount = 1. Refactor __close_file_table_ids() to take a transient reference on fp and unpublish fp from the session idr *under ft->lock* before calling skip() outside the lock. A transient ref protects lifetime but not concurrent field mutation, so the idr_remove() is what keeps __ksmbd_lookup_fd() through this session's idr from granting a new ksmbd_fp_get() reference to an fp whose fp->conn / fp->tcon / fp->volatile_id / op->conn / lock_list links are about to be rewritten by session_fd_check(). Durable reconnect is unaffected because it reaches fp through the global durable table (ksmbd_lookup_durable_fd -> global_ft). Decide n_to_drop together with any FP_INITED -> FP_CLOSED transition under ft->lock so teardown and ksmbd_close_fd() never both consume the idr-owned reference. See ksmbd_mark_fp_closed() for the per-state accounting. For the FP_NEW path to be safe, the opener has to learn that fp was unpublished: ksmbd_update_fstate() now returns -ENOENT when an FP_NEW -> FP_INITED transition finds f_state already advanced or the volatile id cleared (both committed by teardown under ft->lock); smb2_open() propagates that as STATUS_OBJECT_NAME_INVALID and drops the original reference via ksmbd_fd_put(). The list removal cannot be left for a deferred final putter because fp->volatile_id has already been cleared and __ksmbd_remove_fd() will intentionally skip both idr_remove() and list_del_init(). Move the m_fp_list unlink in __ksmbd_remove_fd() above the volatile-id check so that an FP_NEW fp that happened to be added to m_fp_list (smb2_open() adds fp->node before ksmbd_update_fstate() runs) is still cleaned up on the deferred putter path; list_del_init() on an empty node is a no-op and remains safe for fps that were never added. Add a defensive guard in session_fd_check() that refuses non-FP_INITED fps so that even if a teardown reaches an FP_NEW fp it falls into the close branch (where the n_to_drop = 1 accounting keeps the opener's reference alive) instead of the durable-preserve branch (which mutates fp->conn / fp->tcon). Validation on a debug kernel additionally built with CONFIG_DEBUG_LIST and CONFIG_DEBUG_OBJECTS_WORK used a same-session two-tcon workload (open/write storm on one tcon, 50 tree disconnects on the other) and reported no list-corruption, work_struct ODEBUG, sleep-in-atomic, lockdep or kmemleak reports. Reverting only the __close_file_table_ids() hunk while keeping a forced-is_reconnectable() harness produced the expected sleep-in-atomic at vfs_cache.c:1095, confirming the ft->lock-out-of-sleepable-skip discipline. KASAN-enabled direct SMB2 coverage with durable handles enabled exercised ksmbd_close_tree_conn_fds(), ksmbd_close_session_fds(), the FP_NEW failure path, tree_conn_fd_check(), and a non-zero session_fd_check() durable-preserve return. This produced no KASAN, DEBUG_LIST, ODEBUG, or WARNING reports. Fixes: f44158485826 ("cifsd: add file operations") Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit 45afabe7f99c5d8746434ee41c86584c01d70147 Author: Aboorva Devarajan Date: Fri May 8 09:42:56 2026 +0530 powerpc/hv-gpci: fix preempt count leak in sysfs show paths [ Upstream commit dbc30a57bd8e026995e9fa8e8c31cffd18542c01 ] Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb) (which calls preempt_disable()) but only call the matching put_cpu_var() on the error path under the 'out:' label. Every successful read leaks one preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show() (affinity_domain_via_partition_show() was already correct.) On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and eventually return to userspace with preemption still disabled. The next user-mode page fault then hits faulthandler_disabled() == 1, gets forced to SIGSEGV, and the resulting coredump trips 'BUG: scheduling while atomic' in call_usermodehelper_exec -> wait_for_completion_state -> schedule: BUG: scheduling while atomic: //0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470 Add an out_success label that calls put_cpu_var() before returning the byte count, mirroring affinity_domain_via_partition_show(). Fixes: 71f1c39647d8 ("powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor bus topology information") Fixes: 1a160c2a13c6 ("powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show processor config information") Fixes: 71a7ccb478fc ("powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via virtual processor information") Fixes: a69a57cac1ec ("powerpc/hv_gpci: Add sysfs file inside hv_gpci device to show affinity domain via domain information") Signed-off-by: Aboorva Devarajan Reviewed-by: Ritesh Harjani (IBM) Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260508041256.3447113-1-aboorvad@linux.ibm.com Signed-off-by: Sasha Levin commit ef05dae9abb64481e50a935944c0e6b42191568d Author: Jesper Dangaard Brouer Date: Tue May 5 15:21:53 2026 +0200 veth: fix OOB txq access in veth_poll() with asymmetric queue counts [ Upstream commit 08f566e8f83bb70f04ad5aba5be352c490a01c8a ] XDP redirect into a veth device (via bpf_redirect()) calls veth_xdp_xmit(), which enqueues frames into the peer's ptr_ring using smp_processor_id() % peer->real_num_rx_queues as the ring index. With an asymmetric veth pair where the peer has fewer TX queues than RX queues, that index can exceed peer->real_num_tx_queues. veth_poll() then resolves peer_txq for the ring via: peer_txq = peer_dev ? netdev_get_tx_queue(peer_dev, queue_idx) : NULL; where queue_idx = rq->xdp_rxq.queue_index. When queue_idx exceeds peer_dev->real_num_tx_queues this is an out-of-bounds (OOB) access into the peer's netdev_queue array, triggering DEBUG_NET_WARN_ON_ONCE in netdev_get_tx_queue(). The normal ndo_start_xmit path is not affected: the stack clamps skb->queue_mapping via netdev_cap_txqueue() before invoking ndo_start_xmit, so rxq in veth_xmit() never exceeds real_num_tx_queues. Fix veth_poll() by clamping: only dereference peer_txq when queue_idx is within bounds, otherwise set it to NULL. The out-of-range rings are fed exclusively via XDP redirect (veth_xdp_xmit), never via ndo_start_xmit (veth_xmit), so the peer txq was never stopped and there is nothing to wake; NULL is the correct fallback. Reported-by: Sashiko Closes: https://lore.kernel.org/all/20260502071828.616C3C19425@smtp.kernel.org/ Fixes: dc82a33297fc ("veth: apply qdisc backpressure on full ptr_ring to reduce TX drops") Signed-off-by: Jesper Dangaard Brouer Link: https://patch.msgid.link/20260505132159.241305-2-hawk@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 2b3a3c5d72dad0534b8b0a2dab2f4e0ecd52b631 Author: Ankit Khushwaha Date: Wed Oct 8 22:55:16 2025 +0530 ring buffer: Propagate __rb_map_vma return value to caller [ Upstream commit de4cbd704731778a2dc833ce5a24b38e5d672c05 ] The return value from `__rb_map_vma()`, which rejects writable or executable mappings (VM_WRITE, VM_EXEC, or !VM_MAYSHARE), was being ignored. As a result the caller of `__rb_map_vma` always returned 0 even when the mapping had actually failed, allowing it to proceed with an invalid VMA. Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Link: https://lore.kernel.org/20251008172516.20697-1-ankitkhushwaha.linux@gmail.com Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions") Reported-by: syzbot+ddc001b92c083dbf2b97@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?id=194151be8eaebd826005329b2e123aecae714bdb Signed-off-by: Ankit Khushwaha Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 0e789995030800fca426abef860ebc62c98e8a0c Author: Stephen Smalley Date: Wed Apr 29 15:18:40 2026 -0400 selinux: switch two allocations to use kzalloc_objs() [ Upstream commit cf6a513f1937581eb012a217b29817e025a1a0ef ] These were the only two allocations in the policy loading logic that were not already using kzalloc_objs() for the policy data structures. Fix these to be consistent with the rest and to protect against ill-formed policy. Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Sasha Levin commit 2c10b145972f81789fd9d9d8e3e06b1000d8499b Author: Kuniyuki Iwashima Date: Tue Sep 16 21:47:22 2025 +0000 smc: Use __sk_dst_get() and dst_dev_rcu() in smc_vlan_by_tcpsk(). [ Upstream commit 0b0e4d51c6554e5ecc3f8cc73c2eaf12da21249a ] smc_vlan_by_tcpsk() fetches sk_dst_get(sk)->dev before RTNL and passes it to netdev_walk_all_lower_dev(), which is illegal. Also, smc_vlan_by_tcpsk_walk() does not require RTNL at all. Let's use __sk_dst_get(), dst_dev_rcu(), and netdev_walk_all_lower_dev_rcu(). Note that the returned value of smc_vlan_by_tcpsk() is not used in the caller. Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250916214758.650211-5-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a6cd64ead3b4e3b8dddfb0255e5b1e0a13af072f Author: Cristian Ciocaltea Date: Wed Dec 31 22:04:17 2025 +0200 ASoC: nau8821: Cancel pending work before suspend [ Upstream commit 7786b10688ac0ebeaff655923cbb2c7d34a98995 ] A jack detection work that is unscheduled or in progress while executing the suspend handler could trigger a race condition. Ensure state consistency by cancelling any pending work or wait for its execution to complete before processing the suspend. Since driver (re)enables both insert and eject interrupts on resume, there is no risk to miss the related jack events. Therefore, flush_delayed_work() is not required here. Fixes: aab1ad11d69f ("ASoC: nau8821: new driver") Fixes: ee70bacef1c6 ("ASoC: nau8821: Avoid unnecessary blocking in IRQ handler") Signed-off-by: Cristian Ciocaltea Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-3-6b0b76cbbb64@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit bea242c21187544f8b56186ac294e32d80057aee Author: Sasha Levin Date: Sat Aug 29 20:58:34 2026 -0400 Revert "PM: sleep: Use complete() in device_pm_sleep_init()" This reverts commit 171ef40fce41b13f5115d988c45997e94113c7ab. Signed-off-by: Sasha Levin commit 2a7d1daf2674fe7d5b1cc99a4e3b5f0f72d5958f Author: Michael Neuling Date: Fri May 1 06:23:20 2026 +0000 riscv: Fix register corruption from uninitialized cregs on error [ Upstream commit 6ebcbb53fc9bc30843054ed99fd60b8e542628f4 ] compat_riscv_gpr_set() calls cregs_to_regs() unconditionally, even when user_regset_copyin() fails. Since cregs is an uninitialized stack variable, a copyin failure causes uninitialized stack data to be written into the target task's pt_regs, corrupting its register state and potentially leaking kernel stack contents. compat_restore_sigcontext() has the same issue: it calls cregs_to_regs() even when __copy_from_user() fails, leading to the same corruption of the signal-returning task's register state on error. Only call cregs_to_regs() when the user copy succeeds. Fixes: 4608c159594f ("riscv: compat: ptrace: Add compat_arch_ptrace implement") Fixes: 7383ee05314b ("riscv: compat: signal: Add rt_frame implementation") Signed-off-by: Michael Neuling Assisted-by: Cursor:claude-4.6-opus-high-thinking Link: https://patch.msgid.link/20260501062320.2339562-1-mikey@neuling.org Signed-off-by: Paul Walmsley Signed-off-by: Sasha Levin commit 1a2dc103e16448d022a77ad5fc3234641436c4b7 Author: Jiayuan Chen Date: Thu Apr 9 10:37:32 2026 +0800 bpf: Fix use-after-free in offloaded map/prog info fill [ Upstream commit a0c584fc18056709c8e047a82a6045d6c209f4ce ] When querying info for an offloaded BPF map or program, bpf_map_offload_info_fill_ns() and bpf_prog_offload_info_fill_ns() obtain the network namespace with get_net(dev_net(offmap->netdev)). However, the associated netdev's netns may be racing with teardown during netns destruction. If the netns refcount has already reached 0, get_net() performs a refcount_t increment on 0, triggering: refcount_t: addition on 0; use-after-free. Although rtnl_lock and bpf_devs_lock ensure the netdev pointer remains valid, they cannot prevent the netns refcount from reaching zero. Fix this by using maybe_get_net() instead of get_net(). maybe_get_net() uses refcount_inc_not_zero() and returns NULL if the refcount is already zero, which causes ns_get_path_cb() to fail and the caller to return -ENOENT -- the correct behavior when the netns is being destroyed. Fixes: 675fc275a3a2d ("bpf: offload: report device information for offloaded programs") Fixes: 52775b33bb507 ("bpf: offload: report device information about offloaded maps") Reported-by: Yinhao Hu Reported-by: Kaiyan Mei Reviewed-by: Dongliang Mu Closes: https://lore.kernel.org/bpf/f0aa3678-79c9-47ae-9e8c-02a3d1df160a@hust.edu.cn/ Signed-off-by: Jiayuan Chen Acked-by: Daniel Borkmann Link: https://lore.kernel.org/r/20260409023733.168050-1-jiayuan.chen@linux.dev Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 9210ae708ddead67f55610342ea03fe9d4de6005 Author: Cristian Ciocaltea Date: Wed Dec 31 22:04:16 2025 +0200 ASoC: nau8821: Cancel delayed work on component remove [ Upstream commit dbd3fd05cddfdeec1e49b0a66269881c09eebd17 ] Attempting to unload the driver while a jack detection work is pending would likely crash the kernel when it is eventually scheduled for execution: [ 1984.896308] BUG: unable to handle page fault for address: ffffffffc10c2a20 [...] [ 1984.896388] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ 1984.896396] Workqueue: events nau8821_jdet_work [snd_soc_nau8821] [ 1984.896414] RIP: 0010:__mutex_lock+0x9f/0x11d0 [...] [ 1984.896504] Call Trace: [ 1984.896511] [ 1984.896524] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896572] ? snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896596] snd_soc_dapm_disable_pin+0x26/0x60 [snd_soc_core] [ 1984.896622] nau8821_jdet_work+0xeb/0x1e0 [snd_soc_nau8821] [ 1984.896636] process_one_work+0x211/0x590 [ 1984.896649] ? srso_return_thunk+0x5/0x5f [ 1984.896670] worker_thread+0x1cd/0x3a0 Cancel unscheduled jdet_work or wait for its execution to finish before the component driver gets removed. Fixes: aab1ad11d69f ("ASoC: nau8821: new driver") Fixes: ee70bacef1c6 ("ASoC: nau8821: Avoid unnecessary blocking in IRQ handler") Signed-off-by: Cristian Ciocaltea Link: https://patch.msgid.link/20251231-nau8821-cleanup-v1-2-6b0b76cbbb64@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 326e5cf301d0bec0a672aa834d8254c4f9df6255 Author: Kuniyuki Iwashima Date: Tue Sep 16 21:47:21 2025 +0000 smc: Use __sk_dst_get() and dst_dev_rcu() in smc_clc_prfx_match(). [ Upstream commit 235f81045c008169cc4e1955b4a64e118eebe61b ] smc_clc_prfx_match() is called from smc_listen_work() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dst_dev_rcu(). Note that the returned value of smc_clc_prfx_match() is not used in the caller. Fixes: a046d57da19f ("smc: CLC handshake (incl. preparation steps)") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250916214758.650211-4-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 956c57daba55cf9ed25d9f2512883b8a1a927599 Author: Kuniyuki Iwashima Date: Tue Sep 16 21:47:20 2025 +0000 smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set(). [ Upstream commit 935d783e5de9b64587f3adb25641dd8385e64ddb ] smc_clc_prfx_set() is called during connect() and not under RCU nor RTNL. Using sk_dst_get(sk)->dev could trigger UAF. Let's use __sk_dst_get() and dev_dst_rcu() under rcu_read_lock() after kernel_getsockname(). Note that the returned value of smc_clc_prfx_set() is not used in the caller. While at it, we change the 1st arg of smc_clc_prfx_set[46]_rcu() not to touch dst there. Fixes: a046d57da19f ("smc: CLC handshake (incl. preparation steps)") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250916214758.650211-3-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c0fcd72e7eb50205dc20731033b0b1c67ecbe4dc Author: Oliver Upton Date: Tue Sep 30 01:52:37 2025 -0700 KVM: arm64: Prevent access to vCPU events before init [ Upstream commit 0aa1b76fe1429629215a7c79820e4b96233ac4a3 ] Another day, another syzkaller bug. KVM erroneously allows userspace to pend vCPU events for a vCPU that hasn't been initialized yet, leading to KVM interpreting a bunch of uninitialized garbage for routing / injecting the exception. In one case the injection code and the hyp disagree on whether the vCPU has a 32bit EL1 and put the vCPU into an illegal mode for AArch64, tripping the BUG() in exception_target_el() during the next injection: kernel BUG at arch/arm64/kvm/inject_fault.c:40! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : exception_target_el+0x88/0x8c lr : pend_serror_exception+0x18/0x13c sp : ffff800082f03a10 x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000 x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000 x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004 x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20 Call trace: exception_target_el+0x88/0x8c (P) kvm_inject_serror_esr+0x40/0x3b4 __kvm_arm_vcpu_set_events+0xf0/0x100 kvm_arch_vcpu_ioctl+0x180/0x9d4 kvm_vcpu_ioctl+0x60c/0x9f4 __arm64_sys_ioctl+0xac/0x104 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xf0 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000) Reject the ioctls outright as no sane VMM would call these before KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been thrown away by the eventual reset of the vCPU's state. Cc: stable@vger.kernel.org # 6.17 Fixes: b7b27facc7b5 ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS") Signed-off-by: Oliver Upton Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin commit 08aca586482e88aab9616a3e81bc36cad22674a5 Author: Kuniyuki Iwashima Date: Tue Sep 16 21:47:19 2025 +0000 smc: Fix use-after-free in __pnet_find_base_ndev(). [ Upstream commit 3d3466878afd8d43ec0ca2facfbc7f03e40d0f79 ] syzbot reported use-after-free of net_device in __pnet_find_base_ndev(), which was called during connect(). [0] smc_pnet_find_ism_resource() fetches sk_dst_get(sk)->dev and passes down to pnet_find_base_ndev(), where RTNL is held. Then, UAF happened at __pnet_find_base_ndev() when the dev is first used. This means dev had already been freed before acquiring RTNL in pnet_find_base_ndev(). While dev is going away, dst->dev could be swapped with blackhole_netdev, and the dev's refcnt by dst will be released. We must hold dev's refcnt before calling smc_pnet_find_ism_resource(). Also, smc_pnet_find_roce_resource() has the same problem. Let's use __sk_dst_get() and dst_dev_rcu() in the two functions. [0]: BUG: KASAN: use-after-free in __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 Read of size 1 at addr ffff888036bac33a by task syz.0.3632/18609 CPU: 1 UID: 0 PID: 18609 Comm: syz.0.3632 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 Call Trace: dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 __pnet_find_base_ndev+0x1b1/0x1c0 net/smc/smc_pnet.c:926 pnet_find_base_ndev net/smc/smc_pnet.c:946 [inline] smc_pnet_find_ism_by_pnetid net/smc/smc_pnet.c:1103 [inline] smc_pnet_find_ism_resource+0xef/0x390 net/smc/smc_pnet.c:1154 smc_find_ism_device net/smc/af_smc.c:1030 [inline] smc_find_proposal_devices net/smc/af_smc.c:1115 [inline] __smc_connect+0x372/0x1890 net/smc/af_smc.c:1545 smc_connect+0x877/0xd90 net/smc/af_smc.c:1715 __sys_connect_file net/socket.c:2086 [inline] __sys_connect+0x313/0x440 net/socket.c:2105 __do_sys_connect net/socket.c:2111 [inline] __se_sys_connect net/socket.c:2108 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2108 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f47cbf8eba9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f47ccdb1038 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f47cc1d5fa0 RCX: 00007f47cbf8eba9 RDX: 0000000000000010 RSI: 0000200000000280 RDI: 000000000000000b RBP: 00007f47cc011e19 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f47cc1d6038 R14: 00007f47cc1d5fa0 R15: 00007ffc512f8aa8 The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888036bacd00 pfn:0x36bac flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000000 ffffea0001243d08 ffff8880b863fdc0 0000000000000000 raw: ffff888036bacd00 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 2, migratetype Unmovable, gfp_mask 0x446dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOWARN|__GFP_RETRY_MAYFAIL|__GFP_COMP), pid 16741, tgid 16741 (syz-executor), ts 343313197788, free_ts 380670750466 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1851 prep_new_page mm/page_alloc.c:1859 [inline] get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3858 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:5148 alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2416 ___kmalloc_large_node+0x5f/0x1b0 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0x90 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kvmalloc_node_noprof+0x6d/0x5f0 mm/slub.c:5067 alloc_netdev_mqs+0xa3/0x11b0 net/core/dev.c:11812 tun_set_iff+0x532/0xef0 drivers/net/tun.c:2775 __tun_chr_ioctl+0x788/0x1df0 drivers/net/tun.c:3085 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f page last free pid 18610 tgid 18608 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1395 [inline] __free_frozen_pages+0xbc4/0xd30 mm/page_alloc.c:2895 free_large_kmalloc+0x13a/0x1f0 mm/slub.c:4820 device_release+0x99/0x1c0 drivers/base/core.c:-1 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x22b/0x480 lib/kobject.c:737 netdev_run_todo+0xd2e/0xea0 net/core/dev.c:11513 rtnl_unlock net/core/rtnetlink.c:157 [inline] rtnl_net_unlock include/linux/rtnetlink.h:135 [inline] rtnl_dellink+0x537/0x710 net/core/rtnetlink.c:3563 rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6946 netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Memory state around the buggy address: ffff888036bac200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888036bac280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff888036bac300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888036bac380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888036bac400: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 0afff91c6f5e ("net/smc: add pnetid support") Fixes: 1619f770589a ("net/smc: add pnetid support for SMC-D and ISM") Reported-by: syzbot+ea28e9d85be2f327b6c6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68c237c7.050a0220.3c6139.0036.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250916214758.650211-2-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 02871132d8b02a17ebbe7c86d42e18e180f5f46f Author: Tetsuo Handa Date: Tue Nov 25 22:43:12 2025 +0900 can: j1939: make j1939_sk_bind() fail if device is no longer registered [ Upstream commit 46cea215dc9444ec32a76b1b6a9cb809e17b64d5 ] There is a theoretical race window in j1939_sk_netdev_event_unregister() where two j1939_sk_bind() calls jump in between read_unlock_bh() and lock_sock(). The assumption jsk->priv == priv can fail if the first j1939_sk_bind() call once made jsk->priv == NULL due to failed j1939_local_ecu_get() call and the second j1939_sk_bind() call again made jsk->priv != NULL due to successful j1939_local_ecu_get() call. Since the socket lock is held by both j1939_sk_netdev_event_unregister() and j1939_sk_bind(), checking ndev->reg_state with the socket lock held can reliably make the second j1939_sk_bind() call fail (and close this race window). Fixes: 7fcbe5b2c6a4 ("can: j1939: implement NETDEV_UNREGISTER notification handler") Signed-off-by: Tetsuo Handa Acked-by: Oleksij Rempel Link: https://patch.msgid.link/5732921e-247e-4957-a364-da74bd7031d7@I-love.SAKURA.ne.jp Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit 90265bd35d895c4f82b235edde18011c08eeddc8 Author: Tetsuo Handa Date: Sat Sep 27 21:11:16 2025 +0900 can: j1939: add missing calls in NETDEV_UNREGISTER notification handler [ Upstream commit 93a27b5891b8194a8c083c9a80d2141d4bf47ba8 ] Currently NETDEV_UNREGISTER event handler is not calling j1939_cancel_active_session() and j1939_sk_queue_drop_all(). This will result in these calls being skipped when j1939_sk_release() is called. And I guess that the reason syzbot is still reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 is caused by lack of these calls. Calling j1939_cancel_active_session(priv, sk) from j1939_sk_release() can be covered by calling j1939_cancel_active_session(priv, NULL) from j1939_netdev_notify(). Calling j1939_sk_queue_drop_all() from j1939_sk_release() can be covered by calling j1939_sk_netdev_event_netdown() from j1939_netdev_notify(). Therefore, we can reuse j1939_cancel_active_session(priv, NULL) and j1939_sk_netdev_event_netdown(priv) for NETDEV_UNREGISTER event handler. Fixes: 7fcbe5b2c6a4 ("can: j1939: implement NETDEV_UNREGISTER notification handler") Signed-off-by: Tetsuo Handa Tested-by: Oleksij Rempel Acked-by: Oleksij Rempel Link: https://patch.msgid.link/3ad3c7f8-5a74-4b07-a193-cb0725823558@I-love.SAKURA.ne.jp Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit 4e154cb5e7681c2910e2dfa09f05e3469e333745 Author: Tetsuo Handa Date: Mon Aug 25 23:07:24 2025 +0900 can: j1939: implement NETDEV_UNREGISTER notification handler [ Upstream commit 7fcbe5b2c6a4b5407bf2241fdb71e0a390f6ab9a ] syzbot is reporting unregister_netdevice: waiting for vcan0 to become free. Usage count = 2 problem, for j1939 protocol did not have NETDEV_UNREGISTER notification handler for undoing changes made by j1939_sk_bind(). Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But we need to call j1939_priv_put() against an extra ref held by j1939_sk_bind() call (as a part of undoing changes made by j1939_sk_bind()) as soon as NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct() is called via j1939_sk_release()). Otherwise, the extra ref on "struct j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from dropping the usage count to 1; making it impossible for unregister_netdevice() to continue. Reported-by: syzbot Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84 Tested-by: syzbot Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Fixes: 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") Signed-off-by: Tetsuo Handa Tested-by: Oleksij Rempel Acked-by: Oleksij Rempel Link: https://patch.msgid.link/ac9db9a4-6c30-416e-8b94-96e6559d55b2@I-love.SAKURA.ne.jp [mkl: remove space in front of label] Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit 544ffd62ddd093c71150e4d4c542f98153fb8e46 Author: Vladimir Riabchun Date: Fri Aug 22 20:11:36 2025 +0200 mISDN: hfcpci: Fix warning when deleting uninitialized timer [ Upstream commit 97766512a9951b9fd6fc97f1b93211642bb0b220 ] With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads to the following splat: [ 250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0 [ 250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0 [ 250.218775] Modules linked in: hfcpci(-) mISDN_core [ 250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary) [ 250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0 [ 250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d [ 250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286 [ 250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95 [ 250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0 [ 250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39 [ 250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001 [ 250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8 [ 250.232454] FS: 00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000 [ 250.233851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0 [ 250.236117] Call Trace: [ 250.236599] [ 250.236967] ? trace_irq_enable.constprop.0+0xd4/0x130 [ 250.237920] debug_object_assert_init+0x1f6/0x310 [ 250.238762] ? __pfx_debug_object_assert_init+0x10/0x10 [ 250.239658] ? __lock_acquire+0xdea/0x1c70 [ 250.240369] __try_to_del_timer_sync+0x69/0x140 [ 250.241172] ? __pfx___try_to_del_timer_sync+0x10/0x10 [ 250.242058] ? __timer_delete_sync+0xc6/0x120 [ 250.242842] ? lock_acquire+0x30/0x80 [ 250.243474] ? __timer_delete_sync+0xc6/0x120 [ 250.244262] __timer_delete_sync+0x98/0x120 [ 250.245015] HFC_cleanup+0x10/0x20 [hfcpci] [ 250.245704] __do_sys_delete_module+0x348/0x510 [ 250.246461] ? __pfx___do_sys_delete_module+0x10/0x10 [ 250.247338] do_syscall_64+0xc1/0x360 [ 250.247924] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this by initializing hfc_tl timer with DEFINE_TIMER macro. Also, use mod_timer instead of manual timeout update. Fixes: 87c5fa1bb426 ("mISDN: Add different different timer settings for hfc-pci") Fixes: 175302f6b79e ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq") Signed-off-by: Vladimir Riabchun Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2fbe83fe23f541798bcdd7d6b56a08d4ac205bad Author: Wentao Liang Date: Tue Apr 22 10:13:45 2025 +0800 media: platform: exynos4-is: Add hardware sync wait to fimc_is_hw_change_mode() [ Upstream commit bd9f6ce7d512fa21249415c16af801a4ed5d97b6 ] In fimc_is_hw_change_mode(), the function changes camera modes without waiting for hardware completion, risking corrupted data or system hangs if subsequent operations proceed before the hardware is ready. Add fimc_is_hw_wait_intmsr0_intmsd0() after mode configuration, ensuring hardware state synchronization and stable interrupt handling. Signed-off-by: Wentao Liang Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 29abaf93357f4a7d083cf399d4306999e20db31d Author: Namjae Jeon Date: Tue Apr 1 13:50:39 2025 +0900 exfat: fix double free in delayed_free [ Upstream commit 1f3d9724e16d62c7d42c67d6613b8512f2887c22 ] The double free could happen in the following path. exfat_create_upcase_table() exfat_create_upcase_table() : return error exfat_free_upcase_table() : free ->vol_utbl exfat_load_default_upcase_table : return error exfat_kill_sb() delayed_free() exfat_free_upcase_table() <--------- double free This patch set ->vol_util as NULL after freeing it. Reported-by: Jianzhou Zhao Signed-off-by: Namjae Jeon Signed-off-by: Sasha Levin commit 233340626cf1b1887dca181f9f811db60c73f802 Author: Dylan Wolff Date: Wed Mar 12 16:02:00 2025 +0800 jfs: Fix null-ptr-deref in jfs_ioc_trim [ Upstream commit a4685408ff6c3e2af366ad9a7274f45ff3f394ee ] [ Syzkaller Report ] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000087: 0000 [#1 KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f] CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted 6.13.0-rc6-gfbfd64d25c7a-dirty #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Sched_ext: serialise (enabled+all), task: runnable_at=-30ms RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __die_body+0x61/0xb0 ? die_addr+0xb1/0xe0 ? exc_general_protection+0x333/0x510 ? asm_exc_general_protection+0x26/0x30 ? jfs_ioc_trim+0x34b/0x8f0 jfs_ioctl+0x3c8/0x4f0 ? __pfx_jfs_ioctl+0x10/0x10 ? __pfx_jfs_ioctl+0x10/0x10 __se_sys_ioctl+0x269/0x350 ? __pfx___se_sys_ioctl+0x10/0x10 ? do_syscall_64+0xfb/0x210 do_syscall_64+0xee/0x210 ? syscall_exit_to_user_mode+0x1e0/0x330 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe51f4903ad Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640 R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000 Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:jfs_ioc_trim+0x34b/0x8f0 Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93 90 82 fe ff 4c 89 ff 31 f6 RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206 RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001 RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000 R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438 FS: 00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception [ Analysis ] We believe that we have found a concurrency bug in the `fs/jfs` module that results in a null pointer dereference. There is a closely related issue which has been fixed: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ... but, unfortunately, the accepted patch appears to still be susceptible to a null pointer dereference under some interleavings. To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This bug manifests quite rarely under normal circumstances, but is triggereable from a syz-program. Reported-and-tested-by: Dylan J. Wolff Reported-and-tested-by: Jiacheng Xu Signed-off-by: Dylan J. Wolff Signed-off-by: Jiacheng Xu Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 005fee039dd845122d313ac8f2122b0d09dc5d7b Author: Nick Child Date: Thu Mar 20 16:29:51 2025 -0500 ibmvnic: Use kernel helpers for hex dumps [ Upstream commit d93a6caab5d7d9b5ce034d75b1e1e993338e3852 ] Previously, when the driver was printing hex dumps, the buffer was cast to an 8 byte long and printed using string formatters. If the buffer size was not a multiple of 8 then a read buffer overflow was possible. Therefore, create a new ibmvnic function that loops over a buffer and calls hex_dump_to_buffer instead. This patch address KASAN reports like the one below: ibmvnic 30000003 env3: Login Buffer: ibmvnic 30000003 env3: 01000000af000000 <...> ibmvnic 30000003 env3: 2e6d62692e736261 ibmvnic 30000003 env3: 65050003006d6f63 ================================================================== BUG: KASAN: slab-out-of-bounds in ibmvnic_login+0xacc/0xffc [ibmvnic] Read of size 8 at addr c0000001331a9aa8 by task ip/17681 <...> Allocated by task 17681: <...> ibmvnic_login+0x2f0/0xffc [ibmvnic] ibmvnic_open+0x148/0x308 [ibmvnic] __dev_open+0x1ac/0x304 <...> The buggy address is located 168 bytes inside of allocated 175-byte region [c0000001331a9a00, c0000001331a9aaf) <...> ================================================================= ibmvnic 30000003 env3: 000000000033766e Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Nick Child Reviewed-by: Dave Marquardt Reviewed-by: Simon Horman Link: https://patch.msgid.link/20250320212951.11142-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 939dba7a6404d4ac88e2539cb21ac659f5757fd9 Author: Vasiliy Kovalev Date: Tue Dec 24 17:49:13 2024 +0300 jfs: add check read-only before txBeginAnon() call [ Upstream commit 0176e69743ecc02961f2ae1ea42439cd2bf9ed58 ] Added a read-only check before calling `txBeginAnon` in `extAlloc` and `extRecord`. This prevents modification attempts on a read-only mounted filesystem, avoiding potential errors or crashes. Call trace: txBeginAnon+0xac/0x154 extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78 jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248 __block_write_begin_int+0x580/0x166c fs/buffer.c:2128 __block_write_begin fs/buffer.c:2177 [inline] block_write_begin+0x98/0x11c fs/buffer.c:2236 jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4e89b5368baba8324e07@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=4e89b5368baba8324e07 Signed-off-by: Vasiliy Kovalev Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 77038187890ea82d237b05c8a9c4e08a38b1efcb Author: Vasiliy Kovalev Date: Tue Dec 24 17:49:14 2024 +0300 jfs: add check read-only before truncation in jfs_truncate_nolock() [ Upstream commit b5799dd77054c1ec49b0088b006c9908e256843b ] Added a check for "read-only" mode in the `jfs_truncate_nolock` function to avoid errors related to writing to a read-only filesystem. Call stack: block_write_begin() { jfs_write_failed() { jfs_truncate() { jfs_truncate_nolock() { txEnd() { ... log = JFS_SBI(tblk->sb)->log; // (log == NULL) If the `isReadOnly(ip)` condition is triggered in `jfs_truncate_nolock`, the function execution will stop, and no further data modification will occur. Instead, the `xtTruncate` function will be called with the "COMMIT_WMAP" flag, preventing modifications in "read-only" mode. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4e89b5368baba8324e07@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=4e89b5368baba8324e07 Signed-off-by: Vasiliy Kovalev Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit e593031ff19a9484e8a00bc47edd447187721846 Author: Kyle Zeng Date: Thu Aug 6 13:56:55 2026 -0700 perf: Reject exited events as group leaders [ Upstream commit fa091f46c3833fb22384f10eade2b4e1e1d0b278 ] perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state and detaches their group relationships. The event's file descriptor can remain open, however, and perf_event_open() currently accepts that event as a group leader because its early validation rejects only REVOKED and DEAD events. A new sibling can consequently be linked to the detached leader. When the leader is closed, perf_group_detach() observes that its PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The sibling then retains a group_leader pointer to the freed event. Reject group leaders in the EXIT state. Perform the check while holding the shared context mutex so that an exec in the target task cannot detach the leader between validation and group attachment. [peterz: make the earlier test fully consistent] Fixes: 037a3c43edfb ("perf/core: Detach event groups during remove_on_exec") Assisted-by: Codex:gpt-5.6-sol Signed-off-by: Kyle Zeng Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/20260806205655.75722-1-kylebot@openai.com Signed-off-by: Sasha Levin commit 42a2949e0155f9ee8d9041abd3e6f729214dc778 Author: Bryam Vargas Date: Fri Aug 28 03:13:24 2026 +0800 selinux: require a class's permission values to cover its permission count [ Upstream commit b98a8ac50775540f3804397ed08f61ef9910bcab ] security_get_permissions() sizes an array by the class's permissions.nprim and fills it at value - 1, from the inherited common's permission table and then the class's own. A value no permission defines leaves a NULL that sel_make_perm_files() passes to d_alloc_name(), an oops inside sel_write_load() that strands selinux_state.policy_mutex and leaves every later load in uninterruptible sleep; two permissions sharing a value overwrite the first kstrdup(). Bounding each value by nprim catches neither, and neither would a count: the symbol table is keyed on the permission name, so duplicates pass. Track the values each permission table claims and require them to cover exactly what its count declares, rejecting a count no value can reach. Conforming policies are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09b3fe4 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas Acked-by: Stephen Smalley Signed-off-by: Paul Moore (cherry picked from commit b98a8ac50775540f3804397ed08f61ef9910bcab) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 6c2ab7c4549f4f2305848df834e784651dbf1676 Author: Bryam Vargas Date: Fri Aug 28 03:13:22 2026 +0800 selinux: reject a permission value exceeding the class permission count [ Upstream commit d14b5d0e97fccd27974fedc03b903408872907fd ] perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. Cc: stable@vger.kernel.org Fixes: 55fcf09b3fe4 ("selinux: add support for querying object classes and permissions from the running policy") Signed-off-by: Bryam Vargas Acked-by: Stephen Smalley [PM: tweak comment for line length] Signed-off-by: Paul Moore (cherry picked from commit d14b5d0e97fccd27974fedc03b903408872907fd) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 8c07940b6cc84ea77b5b53cc9d38dbfd99d99fec Author: Christian Göttsche Date: Fri Aug 28 03:13:20 2026 +0800 selinux: more strict policy parsing [ Upstream commit 18fa21f10d008a0fc22565109c7d38f304295912 ] Be more strict during parsing of policies and reject invalid values. Add some error messages in the case of policy parse failures, to enhance debugging, either on a malformed policy or a too strict check. Signed-off-by: Christian Göttsche Acked-by: Stephen Smalley [PM: fixed checkpatch.pl warnings, style problems] Signed-off-by: Paul Moore (cherry picked from commit 18fa21f10d008a0fc22565109c7d38f304295912) [WG: drop the AVTAB_XPERMS_NLMSG case, netlink xperm support (d1d991efaf34 "selinux: Add netlink xperm support") is not present in this tree] Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 47f28783926368ff191abd44a2bb5ad993e26abf Author: Christian Göttsche Date: Fri Aug 28 03:13:18 2026 +0800 selinux: use u16 for security classes [ Upstream commit fa79a596848fe38c55ccab8832ac35dac07fb00c ] Security class identifiers are limited to 2^16, thus use the appropriate type u16 consistently. Signed-off-by: Christian Göttsche Acked-by: Stephen Smalley Signed-off-by: Paul Moore (cherry picked from commit fa79a596848fe38c55ccab8832ac35dac07fb00c) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 8e14b420188ca588a6af791ce32fc145327a51eb Author: Christian Göttsche Date: Fri Aug 28 03:13:16 2026 +0800 selinux: make more use of str_read() when loading the policy [ Upstream commit 01c2253a0fbdccb58cd79d4ff9ab39964bfb4474 ] Simplify the call sites, and enable future string validation in a single place. Signed-off-by: Christian Göttsche [PM: subject tweak] Signed-off-by: Paul Moore (cherry picked from commit 01c2253a0fbdccb58cd79d4ff9ab39964bfb4474) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 778fdda45307f43c60e93062f30f4b8ba94146ec Author: Christian Göttsche Date: Fri Aug 28 03:13:14 2026 +0800 selinux: avoid unnecessary indirection in struct level_datum [ Upstream commit 749153636643aaa793f14e84e864fdaf5ed0620d ] Store the owned member of type struct mls_level directly in the parent struct instead of an extra heap allocation. Signed-off-by: Christian Göttsche Signed-off-by: Paul Moore (cherry picked from commit 749153636643aaa793f14e84e864fdaf5ed0620d) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit dd0e4d0441a05db74dae75298f448a635e70193c Author: Christian Göttsche Date: Fri Aug 28 03:13:12 2026 +0800 selinux: use known type instead of void pointer [ Upstream commit f07586160fd5492f8d48e7667e7a5d8797aa5090 ] Improve type safety and readability by using the known type. Signed-off-by: Christian Göttsche Signed-off-by: Paul Moore (cherry picked from commit f07586160fd5492f8d48e7667e7a5d8797aa5090) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 569eff01248092858f5fbd594817330198380c83 Author: Carlos Llamas Date: Thu Aug 27 22:04:27 2026 +0000 HID: uhid: convert to hid_safe_input_report() commit 63a694c51bf120a37550890b8e7736b4888985e9 upstream. Commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()"), added a check in hid_report_raw_event() to reject reports if the received data size is smaller than expected. This was intended to prevent OOB errors by no longer allowing zeroing-out of shorter reports due to the lack of buffer size information. However, this leads to regressions in hid_report_raw_event(), where shorter than expected reports are rejected, even though their buffers are sufficiently large to be zero-padded. To solve this issue, Benjamin introduced a safer alternative in commit 206342541fc8 ("HID: core: introduce hid_safe_input_report()"), which forwards the buffer size and allows hid_report_raw_event() to safely zero-pad the data. Convert uhid to use hid_safe_input_report() and pass UHID_DATA_MAX as the buffer size. This prevents the reported regressions [1], allowing hid core to zero-pad the shorter reports safely as expected. Cc: stable@vger.kernel.org Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ [1] Signed-off-by: Carlos Llamas Reviewed-by: Lee Jones Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ Signed-off-by: Jiri Kosina Signed-off-by: Carlos Llamas Signed-off-by: Sasha Levin commit d19f98c79f1b7e09e4cdf5c20d626e571e487467 Author: Dmitry Bogdanov Date: Thu Aug 27 15:20:15 2026 -0700 nvme-tcp: fix usage of page_frag_cache commit 36ac05f7cfd59d90c597071304b14e98090d5dd1 upstream. nvme uses page_frag_cache to preallocate PDU for each preallocated request of block device. Block devices are created in parallel threads, consequently page_frag_cache is used in not thread-safe manner. That leads to incorrect refcounting of backstore pages and premature free. That can be catched by !sendpage_ok inside network stack: WARNING: CPU: 7 PID: 467 at ../net/core/skbuff.c:6931 skb_splice_from_iter+0xfa/0x310. tcp_sendmsg_locked+0x782/0xce0 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x8b/0xa0 nvme_tcp_try_send_cmd_pdu+0x149/0x2a0 Then random panic may occur. Fix that by serializing the usage of page_frag_cache. Fixes: 4e893ca81170 ("nvme_core: scan namespaces asynchronously") Signed-off-by: Dmitry Bogdanov Signed-off-by: Daniel Wagner Signed-off-by: Keith Busch [carlos.bilbao: adjust context in nvme_tcp_free_queue; branch predates 19bdb70c77d3 ("nvme-tcp: lockdep: use dynamic lockdep keys per socket instance")] Signed-off-by: Carlos Bilbao (Lambda) Signed-off-by: Sasha Levin commit 2acc77e88670eaddd0cb57d4003922945a4db1e3 Author: Vishnu Razdan Date: Tue Aug 25 09:52:03 2026 -0700 io_uring/io-wq: fix worker accounting when canceling creation callbacks commit 297b5ccea4acacaa47c150f043bce695202afbf1 upstream. create_worker_cb() reserves an io-wq worker slot only after its task-work callback runs. If the callback is canceled before then, io_worker_cancel_cb() still decrements acct->nr_workers. When an existing worker retires with its creation callback pending, that worker has already decremented the same account's worker count. The resulting undercount permits worker creation beyond the account's configured limit. On an AST2600 OpenBMC system, an unchanged sensor daemon reached 4,291 threads with the original kernel. With an equivalent downstream fix, 25 passive samples under its normal workload showed 6-9 threads. Decrement nr_workers only when the canceled callback is not create_worker_cb(). Continuation callbacks still release their reserved slot, and both callback types retain the existing running-count, reference-count, and create-state cleanup. [ Backport: retain the existing wq->lock protecting worker accounting. ] Fixes: 1d5f5ea7cb7d ("io-wq: remove worker to owner tw dependency") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6-sol Reviewed-by: Gabriel Krisman Bertazi Link: https://patch.msgid.link/20260811-vrazdan-io-wq-b4-submit-v1-1-719ced16c921@openai.com Signed-off-by: Vishnu Razdan Signed-off-by: Sasha Levin commit ed1cd834da65db127f1c30ff67e78f14825a06c1 Author: Eric Biggers Date: Wed Aug 26 20:28:15 2026 -0700 ext4: don't enable DAX on new encrypted files commit da32af420d6d466e247c43ac0b829edeac7ae0ad upstream. Currently, when a new encrypted regular file is created, the call to ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the filesystem is mounted with "-o dax=always". EXT4_INODE_ENCRYPT then actually gets set a bit later in __ext4_new_inode(), when it calls fscrypt_set_context() which calls ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too. This was intended to clear S_DAX as well. However, this was broken by commit 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load"). This causes data written to the file to bypass encryption, also causing xfstests failures such as generic/548 (when "-o dax=always" is used). Fix this by simplifying the flow by making __ext4_new_inode() set EXT4_INODE_ENCRYPT earlier. This makes it take effect in ext4_set_inode_flags(inode, init=true), making S_DAX never be set. Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first place on new encrypted inodes. Then it doesn't need to be cleared. As a result of these simplifications, ext4_set_context() no longer needs to change inode flags or state when 'handle != NULL'. Remove that too. Reported-by: Disha Goel Reported-by: Ojaswin Mujoo Closes: https://lore.kernel.org/r/20260723085648.1500357-1-ojaswin@linux.ibm.com Fixes: 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Tested-by: Disha Goel Reviewed-by: Ojaswin Mujoo Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260730175212.36923-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit d8636c8f9f95d0fd1e2f6f1cad0d5757aa6f212a Author: Jinu Kim Date: Tue Jul 21 19:35:11 2026 +0900 KVM: x86/mmu: Check write tracking in all address spaces [ Upstream commit 0f38453cdb2e17566ccb7c0f3dabd5bd21caca26 ] kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). Fixes: 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") Assisted-by: Codex:GPT-5 Signed-off-by: Jinu Kim Message-ID: <20260721103512.2136240-2-kimjw04271234@gmail.com> [invert direction of the conditional. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin commit bc6e943794515d2a8417b02597a27bd377468d04 Author: Peiyang He Date: Thu Jul 30 10:28:27 2026 +0800 RDMA/rxe: Fix OOB in free_rd_atomic_resources() [ Upstream commit de329533792a373186d79dca1ca120f8fa0afd05 ] free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic. Updating max_dest_rd_atomic before freeing the old array can make the free path walk past the old allocation and trigger a slab out-of-bounds write catched by KASAN: ================================================================== BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] BUG: KASAN: slab-out-of-bounds in rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 Write of size 4 at addr ffff88802b8dddb8 by task syz.3.451/11063 CPU: 0 UID: 0 PID: 11063 Comm: syz.3.451 Not tainted 7.1.0 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xf7/0x600 mm/kasan/report.c:482 kasan_report+0xe4/0x120 mm/kasan/report.c:595 free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:163 [inline] rxe_qp_from_attr+0x1e88/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:712 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680 vfs_write+0x2aa/0x1070 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fefc75a70cd Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fefc8495018 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fefc7835fa0 RCX: 00007fefc75a70cd RDX: 0000000000000078 RSI: 0000200000000240 RDI: 0000000000000007 RBP: 00007fefc764f10f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fefc7836038 R14: 00007fefc7835fa0 R15: 00007ffcf0586aa0 Allocated by task 11063: kasan_save_stack+0x33/0x60 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5296 [inline] __kmalloc_noprof+0x32a/0x850 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] alloc_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:155 [inline] rxe_qp_from_attr+0x3f8/0x2150 drivers/infiniband/sw/rxe/rxe_qp.c:714 rxe_modify_qp+0x1e2/0x530 drivers/infiniband/sw/rxe/rxe_verbs.c:623 ib_security_modify_qp+0x223/0xfa0 drivers/infiniband/core/security.c:625 _ib_modify_qp+0x333/0xec0 drivers/infiniband/core/verbs.c:1915 modify_qp+0x13ca/0x1940 drivers/infiniband/core/uverbs_cmd.c:1932 ib_uverbs_modify_qp+0xcb/0x120 drivers/infiniband/core/uverbs_cmd.c:1958 ib_uverbs_write+0xb86/0x1030 drivers/infiniband/core/uverbs_main.c:680 vfs_write+0x2aa/0x1070 fs/read_write.c:686 ksys_write+0x1f8/0x250 fs/read_write.c:740 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ffff88802b8ddd80 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes to the right of allocated 56-byte region [ffff88802b8ddd80, ffff88802b8dddb8) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2b8dd flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: f5(slab) raw: 00fff00000000000 ffff888015c418c0 dead000000000100 dead000000000122 raw: 0000000000000000 0000000800200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0xd2c40(GFP_NOFS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 4651, tgid 4651 ((udev-worker)), ts 123427165316, free_ts 123425874255 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0xfc/0x120 mm/page_alloc.c:1853 prep_new_page mm/page_alloc.c:1861 [inline] get_page_from_freelist+0x75b/0x3220 mm/page_alloc.c:3941 __alloc_frozen_pages_noprof+0x27e/0x2b00 mm/page_alloc.c:5221 alloc_slab_page mm/slub.c:3278 [inline] allocate_slab mm/slub.c:3467 [inline] new_slab+0xa6/0x670 mm/slub.c:3525 refill_objects+0x278/0x420 mm/slub.c:7272 refill_sheaf mm/slub.c:2816 [inline] __pcs_replace_empty_main+0x2ed/0x640 mm/slub.c:4652 alloc_from_pcs mm/slub.c:4750 [inline] slab_alloc_node mm/slub.c:4884 [inline] __do_kmalloc_node mm/slub.c:5295 [inline] __kmalloc_noprof+0x68d/0x850 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] tomoyo_encode2+0x100/0x3e0 security/tomoyo/realpath.c:45 tomoyo_encode+0x29/0x50 security/tomoyo/realpath.c:80 tomoyo_realpath_from_path+0x18c/0x690 security/tomoyo/realpath.c:283 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_check_open_permission+0x2ab/0x3c0 security/tomoyo/file.c:776 tomoyo_file_open+0x6b/0x90 security/tomoyo/tomoyo.c:334 security_file_open+0x7a/0x1b0 security/security.c:2739 do_dentry_open+0x57e/0x1690 fs/open.c:924 vfs_open+0x82/0x3f0 fs/open.c:1079 do_open fs/namei.c:4699 [inline] path_openat+0x218a/0x3190 fs/namei.c:4858 page last free pid 1 tgid 1 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] __free_pages_prepare mm/page_alloc.c:1397 [inline] __free_frozen_pages+0x763/0xfc0 mm/page_alloc.c:2938 selinux_genfs_get_sid security/selinux/hooks.c:1364 [inline] inode_doinit_with_dentry+0x903/0x1320 security/selinux/hooks.c:1563 selinux_d_instantiate+0x26/0x30 security/selinux/hooks.c:6658 security_d_instantiate+0x123/0x190 security/security.c:3704 d_splice_alias_ops+0x92/0x850 fs/dcache.c:3141 kernfs_iop_lookup+0x23f/0x2d0 fs/kernfs/dir.c:1289 lookup_open.isra.0+0x659/0x1080 fs/namei.c:4484 open_last_lookups fs/namei.c:4611 [inline] path_openat+0x17dd/0x3190 fs/namei.c:4855 do_file_open+0x20c/0x430 fs/namei.c:4887 do_sys_openat2+0x101/0x1d0 fs/open.c:1364 do_sys_open fs/open.c:1370 [inline] __do_sys_openat fs/open.c:1386 [inline] __se_sys_openat fs/open.c:1381 [inline] __x64_sys_openat+0x141/0x200 fs/open.c:1381 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Memory state around the buggy address: ffff88802b8ddc80: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ffff88802b8ddd00: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff88802b8ddd80: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc ^ ffff88802b8dde00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88802b8dde80: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc Fix the OOB by moving the assignment after free_rd_atomic_resources() so the old array is freed using the old bound. This matches the original ordering in commit 8700e3e7c485 ("Soft RoCE driver"). Closes: https://lore.kernel.org/all/365C68B4923F8214+30195a67-0b90-4b92-ab96-2ce41517793c@smail.nju.edu.cn/ Fixes: b6bbee0d2438 ("IB/rxe: Properly honor max IRD value for rd/atomic.") Cc: stable@vger.kernel.org Signed-off-by: Peiyang He Reviewed-by: Zhu Yanjun Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 0136b528b753c5a56e4d997ef20b86bb6750b8fb Author: Ibrahim Hashimov Date: Sun Jul 12 14:17:20 2026 +0200 RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp [ Upstream commit 6f7014237405e7f032b5c53a82d9eccf6161c291 ] rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into a use-after-free in rxe_receiver() (local DoS). Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(), as rxe_qp_reset() already does when tearing this array down, re-enabling only after alloc_rd_atomic_resources() succeeds so the responder never resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c completion paths. Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. Fixes: 8700e3e7c485 ("Soft RoCE driver") Reviewed-by: Zhu Yanjun Signed-off-by: Ibrahim Hashimov Link: https://patch.msgid.link/20260712121720.78001-1-security@auditcode.ai Assisted-by: AuditCode-AI:2026.07 Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin