commit 674f684f7c61c3db475450e8c2b0c5701f9e4ae7 Author: Greg Kroah-Hartman Date: Fri Jul 24 15:52:02 2026 +0200 Linux 5.15.212 Link: https://lore.kernel.org/r/20260721152405.946368001@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Ron Economos Tested-by: Shuah Khan Tested-by: Pavel Machek (CIP) Link: https://lore.kernel.org/r/20260722142759.100285390@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Pavel Machek (CIP) Tested-by: Florian Fainelli Tested-by: Barry K. Nathan Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ddec1ef7250de3f7570b013cadf5dbdd930c01ef Author: Sandipan Das Date: Mon Jun 1 20:28:46 2026 +0530 perf/x86/amd/core: Always use the NMI latency mitigation commit 73a4c02f94a98d94480c3e5c81450215a4da05ba upstream. Commit df4d29732fda ("perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp") fixed handling of late-arriving NMIs but limited the mitigation to processors having X86_FEATURE_PERFCTR_CORE. However, it is unclear if processors without this feature are also affected. When Mediated vPMU is enabled on affected hardware, it is also possible to bypass the fix inside KVM guests if X86_FEATURE_PERFCTR_CORE is removed from the guest CPUID (e.g. using "-cpu host,-perfctr-core" with QEMU). Hence, use the mitigation at all times. Fixes: df4d29732fda ("perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp") Signed-off-by: Sandipan Das Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/29a3c970da289ab8f24282933bdb36545c0403e8.1780325517.git.sandipan.das@amd.com Signed-off-by: Greg Kroah-Hartman commit d7649aa11089a93ea2285c210397aa67e5800766 Author: HyeongJun An Date: Wed Jun 24 08:38:40 2026 +0900 ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() commit 435990e25bf1f4af3e6df12a6fbfd1f7ba4a97d4 upstream. snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell. Fixes: 46397622a3fa ("ALSA: seq: Add UMP support") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20260623233841.853326-1-sammiee5311@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 9bf2db6465b8a93eb859548042620b35da6d1ac7 Author: Jean-Baptiste Maneyrol Date: Tue Jun 23 16:22:15 2026 +0200 iio: imu: inv_icm42600: fix timestamp clock period by using lower value commit 8b0b864c11a2e2ada470f9d5010e1c2bf1eceef2 upstream. Clock period value is used for computing periods of sampling. There is no need for it to be higher than the maximum odr, otherwise we are losing precision in the computation for nothing. Switch clock period value to maximum odr period (8kHz). Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit ed37d0b1d75e9f31d82f4cf42df4838273e8ac5c Author: Takashi Iwai Date: Tue Dec 31 15:53:58 2024 +0100 ALSA: seq: Check UMP support for midi_version change commit 8765429279e7d3d68d39ace5f84af2815174bb1e upstream. When the kernel is built without UMP support but a user-space app requires the midi_version > 0, the kernel should return an error. Otherwise user-space assumes as if it were possible to deal, eventually hitting serious errors later. Fixes: 46397622a3fa ("ALSA: seq: Add UMP support") Cc: Link: https://patch.msgid.link/20241231145358.21946-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4523de346a2864d50acfb01237eeb4645ef0674b Author: Takashi Iwai Date: Mon Aug 19 10:41:53 2024 +0200 ALSA: seq: Skip event type filtering for UMP events commit 32108c22ac619c32dd6db594319e259b63bfb387 upstream. UMP events don't use the event type field, hence it's invalid to apply the filter, which may drop the events unexpectedly. Skip the event filtering for UMP events, instead. Fixes: 46397622a3fa ("ALSA: seq: Add UMP support") Cc: Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 725089a7332dc55de417b3d28470c12ee2685df4 Author: Jean-Baptiste Maneyrol Date: Fri May 24 12:48:51 2024 +0000 iio: invensense: fix odr switching to same value commit 95444b9eeb8c5c0330563931d70c61ca3b101548 upstream. ODR switching happens in 2 steps, update to store the new value and then apply when the ODR change flag is received in the data. When switching to the same ODR value, the ODR change flag is never happening, and frequency switching is blocked waiting for the never coming apply. Fix the issue by preventing update to happen when switching to same ODR value. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240524124851.567485-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 4c3e8cb21bfb821c6e4119b11aa954191e692de8 Author: Jean-Baptiste Maneyrol Date: Mon Feb 19 15:47:41 2024 +0000 iio: imu: inv_mpu6050: fix frequency setting when chip is off commit daec424cc57b33a28f8621eb7ac85f8bd327bd6b upstream. Track correctly FIFO state and apply ODR change before starting the chip. Without the fix, you cannot change ODR more than 1 time when data buffering is off. This restriction on a single pending ODR change should only apply when the FIFO is on. Fixes: 111e1abd0045 ("iio: imu: inv_mpu6050: use the common inv_sensors timestamp module") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240219154741.90601-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit b880c11d123c848ab8004f80541e25a2c9cae56f Author: Takashi Iwai Date: Mon Jun 5 16:47:58 2023 +0200 ALSA: seq: Avoid confusion of aligned read size commit 8c15a18331191b67bdce54d21af068baec044baf upstream. Currently the read event packet size in snd_seq_read() is defined by client->midi_version value that is guaranteed to be zero if UMP isn't enabled. But the static analyzer doesn't know of the fact, and it still suspects as if it were leading to a potential overflow. Add the more explicit check of CONFIG_SND_SEQ_UMP to determine the aligned_size value for avoiding the confusion. Fixes: 46397622a3fa ("ALSA: seq: Add UMP support") Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202305261415.NY0vapZK-lkp@intel.com/ Link: https://lore.kernel.org/r/20230605144758.6677-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 3ef66cbb4e842aaac9efd72701b931ef0b5ac21b Author: Luiz Augusto von Dentz Date: Tue Mar 17 11:54:01 2026 -0400 Bluetooth: L2CAP: Fix regressions caused by reusing ident commit 761fb8ec8778f0caf2bba5a41e3cff1ea86974f3 upstream. This attempt to fix regressions caused by reusing ident which apparently is not handled well on certain stacks causing the stack to not respond to requests, so instead of simple returning the first unallocated id this stores the last used tx_ident and then attempt to use the next until all available ids are exausted and then cycle starting over to 1. Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120 Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177 Fixes: 6c3ea155e5ee ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident") Signed-off-by: Luiz Augusto von Dentz Tested-by: Christian Eggers Signed-off-by: Greg Kroah-Hartman commit 1b4a3c2f0509e7b0e65667f3c36676a849ee2755 Author: Marc Zyngier Date: Sat Jun 27 11:51:05 2026 +0100 KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers commit 3a07249981629ace483ebbef81ef6b34c2d2afec upstream. kvm_io_bus_get_dev() returns a device that is only matched by the address, and nothing else. This can cause a lifetime issue if the matched device is not the expected type, as by the time the caller can introspect the object, it might be gone (the srcu lock having been dropped). Given that there is only a single user of this helper, the simplest option is to move the locking responsibility to the caller, which can keep the srcu lock held for as long as it wants. Note that this aligns with other kvm_io_bus*() helpers, which already require the srcu lock to be held by the callers. Reported-by: Will Deacon Fixes: 8a39d00670f07 ("KVM: kvm_io_bus: Add kvm_io_bus_get_dev() call") Link: https://lore.kernel.org/all/20260626111344.802555-1-maz@kernel.org Cc: stable@vger.kernel.org Reviewed-by: Oliver Upton Link: https://patch.msgid.link/20260627105105.1005990-1-maz@kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman commit 384628d6cdde0fcd76868606fad3ad8293100afb Author: Zhan Xusheng Date: Tue Jun 16 19:20:17 2026 +0800 posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu() commit 26aff38fefb1d6cd87e22525f41cc8f1aa61b24f upstream. update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with u64 nsecs = rlim_new * NSEC_PER_SEC; On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC (1000000000L) are 32-bit, so the multiplication is performed in unsigned long and truncated for rlim_new > 4 seconds before being widened to u64. The same file already casts to u64 for the matching computation in check_process_timers(): u64 softns = (u64)soft * NSEC_PER_SEC; As a result, the truncated value is installed into the CPUCLOCK_PROF expiry cache (nextevt), causing the process CPU timer to be programmed to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The actual SIGXCPU/SIGKILL decision in check_process_timers() already casts to u64 and is therefore correct, so limit enforcement is not broken; only the expiry-cache programming is wrong. Apply the same cast here so both paths convert rlim_cur identically. 64-bit kernels are unaffected. Fixes: 858cf3a8c599 ("timers/itimer: Convert internal cputime_t units to nsec") Signed-off-by: Zhan Xusheng Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260616112017.1681372-1-zhanxusheng@xiaomi.com Signed-off-by: Greg Kroah-Hartman commit 1e446e8f8c763be3de7d0362e024cdf46194ffef Author: Wentao Liang Date: Tue Jul 21 07:47:38 2026 -0400 regulator: scmi: fix of_node refcount leak in scmi_regulator_probe() [ Upstream commit fa11039d6cdff84584a3ef8cc1f5e1b56e045da2 ] scmi_regulator_probe() calls of_find_node_by_name() which takes a reference on the returned device node. On the error path where process_scmi_regulator_of_node() fails, the function returns without calling of_node_put() on the child node, leaking the reference. Add of_node_put(np) on the error path to properly release the reference. Cc: stable@vger.kernel.org Fixes: 0fbeae70ee7c ("regulator: add SCMI driver") Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260527104850.872415-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown [ kept the existing of_node_put(child) since 5.15 still uses the non-scoped for_each_child_of_node() loop, only adding the new of_node_put(np) line ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c8e3115d5be752c4af1c1fcbbe875645b79f6fa1 Author: Ricardo Robaina Date: Tue Jul 21 07:47:03 2026 -0400 audit: fix potential integer overflow in audit_log_n_hex() [ Upstream commit 65dfde57d1e29ce2b76fc23dd565eccd5c0bc0f0 ] The function calculates new_len as len << 1 for hex encoding. This has two overflow risks: the shift itself can overflow when len is large, and the result can be truncated when assigned to new_len (declared as int) from the size_t calculation. Fix by using check_shl_overflow() to catch shift overflow and changing new_len and loop counter i to size_t to prevent truncation. Cc: stable@vger.kernel.org Fixes: 168b7173959f ("AUDIT: Clean up logging of untrusted strings") Reviewed-by: Richard Guy Briggs Signed-off-by: Ricardo Robaina [PM: remove vertical whitspace noise] Signed-off-by: Paul Moore Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 39c0915b85bedcc12b0296bf59dcc865f4b697b6 Author: Ricardo Robaina Date: Tue Jul 21 07:47:02 2026 -0400 audit: add audit_log_nf_skb helper function [ Upstream commit f19590b07cb620be1fcd5474c49515e21a05d406 ] Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c) have to be kept in sync. Both source files had duplicated versions of audit_ip4() and audit_ip6() functions, which can result in lack of consistency and/or duplicated work. This patch adds a helper function in audit.c that can be called by netfilter code commonly, aiming to improve maintainability and consistency. Suggested-by: Florian Westphal Suggested-by: Paul Moore Signed-off-by: Ricardo Robaina Acked-by: Florian Westphal Signed-off-by: Paul Moore Stable-dep-of: 65dfde57d1e2 ("audit: fix potential integer overflow in audit_log_n_hex()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4b5875cbb85dbf4d11385eb0a7a589c086d76d42 Author: Qu Wenruo Date: Mon Jul 20 20:45:24 2026 -0400 btrfs: fix incorrect buffered IO fallback for append direct writes [ Upstream commit ff66fe6662330226b3f486014c375538d91c44aa ] [BUG] With the previous bug of short direct writes fixed, test case generic/362 (*) still fails with the following error with nodatasum mount option: # generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) # - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) # --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930 # +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:13:09.072485767 +0930 # @@ -1,2 +1,3 @@ # QA output created by 362 # +Wrong file size after first write, got 8192 expected 4096 # Silence is golden # ... *: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible: https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/ [CAUSE] Inside btrfs_dio_iomap_begin() for a direct write, we increase the isize if it's beyond the current isize. But if the direct io finished short, we do not revert the isize to the previous value nor to the short write end. Then if we need to fall back to buffered writes, and the write has IOCB_APPEND flag, then the buffered write will be positioned at the incorrect isize. The call chain looks like this: btrfs_direct_write(pos=0, length=4K) |- __iomap_dio_rw() | |- iomap_iter() | | |- btrfs_dio_iomap_begin() | | |- btrfs_get_blocks_direct_write() | | |- i_size_write() | | Which updates the isize to the write end (4K). | | | |- iomap_dio_iter() | | Failed with -EFAULT on the first page. | | | |- iomap_iter() | | |- btrfs_dio_iomap_end() | | Detects a short write, return -ENOTBLK | |- if (ret == -ENOTBLK) { ret = 0;} | Which resets the return value. | |- ret = iomap_dio_complet() | Which returns 0. | |- btrfs_buffered_write(iocb, from); |- generic_write_checks() |- iocb->ki_pos = i_size_read() Which is still the new size (4K), other than the original isize 0. [FIX] Introduce the following btrfs_dio_data members: - old_isize - updated_isize If the direct write has enlarged the isize. Then if we got a short write, and btrfs_dio_data::updated_isize is set, revert to the correct isize based on old_isize and current file position. And here we call i_size_write() without holding an extent lock, which is a very special case that we're safe to do: - Only a single writer can be enlarging isize Enlarging isize will take the exclusive inode lock. - Buffered readers need to wait for the OE we're holding Buffered readers will lock extent and wait for OE of the folio range. Sometimes we can skip the OE wait, but since all page cache is invalidated, the OE wait can not be skipped. But I do not think this is the most elegant solution, nor covers all cases. E.g. if the bio is submitted but IO failed, we are unable to do the revert. I believe the more elegant one would be extend the EXTENT_DIO_LOCKED lifespan for direct writes, so that we can update the isize when a write beyond EOF finished successfully. However that change is too huge for a small bug fix. So only implement the minimal partial fix for now. [REASON FOR NO FIXES TAG] The bug is again very old, before commit f85781fb505e ("btrfs: switch to iomap for direct IO") we are already increasing isize without a proper rollback for short writes. Thus only a CC to stable. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c34369473bfe92a0b46ec78d6358e30341c7f481 Author: Giovanni Cabiddu Date: Mon Jul 20 20:45:08 2026 -0400 crypto: qat - validate RSA CRT component lengths [ Upstream commit b3ac78756588059729b9195fcc9f4b37d54057a5 ] The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds. Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode") Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu Reviewed-by: Ahsan Atta Reviewed-by: Laurent M Coquerel Tested-by: Laurent M Coquerel Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a0f38579f556c35efa0bdffcb7f6ad6f738f4d51 Author: Qu Wenruo Date: Mon Jul 20 16:19:28 2026 -0400 btrfs: fix false IO failure after falling back to buffered write [ Upstream commit 66ff4d366e7eb4d31813d2acabf3af512ce03aa5 ] [BUG] The test case generic/362 will fail with "nodatasum" mount option (*): MOUNT_OPTIONS -- -o nodatasum /dev/mapper/test-scratch1 /mnt/scratch # generic/362 0s ... - output mismatch (see /home/adam/xfstests/results//generic/362.out.bad) # --- tests/generic/362.out 2024-08-24 15:31:37.200000000 +0930 # +++ /home/adam/xfstests/results//generic/362.out.bad 2026-05-27 10:21:17.574771567 +0930 # @@ -1,2 +1,3 @@ # QA output created by 362 # +First write failed: Input/output error # Silence is golden # ... *: If the test case has been executed before with default data checksum, the failure will not reproduce. Need the following fix to make it reliably reproducible: https://lore.kernel.org/linux-btrfs/20260528111659.87113-1-wqu@suse.com/ [CAUSE] Inside __iomap_dio_rw(), the -EFAULT/-ENOTBLK error is not directly returned. Thus we never got an error pointer from __iomap_dio_rw(). The call chain looks like this: btrfs_direct_write() |- btrfs_dio_write() |- __iomap_dio_rw() | |- iomap_iter() | | |- btrfs_dio_iomap_begin() | | Now an ordered extent is allocated for the 4K write. | | | |- iomi.status = iomap_dio_iter() | | Where iomap_dio_iter() returned -EFAULT. | | | |- ret = iomap_iter() | | |- btrfs_dio_iomap_end() | | | |- btrfs_finish_ordered_extent(uptodate = false) | | | | |- can_finish_ordered_extent() | | | | |- btrfs_mark_ordered_extent_error() | | | | |- mapping_set_error() | | | | Now the address space is marked error. | | | | return -ENOTBLK | | |- return -ENOTBLK | |- if (ret == -ENOTBLK) { ret = 0; } | Now the return value is reset to 0. | Thus no error pointer will be returned. | |- ret = iomap_dio_complete() | Since no byte is submitted, @ret is 0. | |- Fallback to buffered IO | And the buffered write finished without error | |- filemap_fdatawait_range() |- filemap_check_errors() The previous error is recorded, thus an error is returned However the buffered write is properly submitted and finished, the error is from the btrfs_finish_ordered_extent() call with @uptodate = false. [FIX] When a short dio write happened, any range that is submitted will have btrfs_extract_ordered_extent() to be called, thus the submitted range will always have an OE just covering the submitted range. The remaining OE range is never submitted, thus they should be treated as truncated, not an error. So that we can properly reclaim and not insert an unnecessary file extent item, without marking the mapping as error. Extract a helper, btrfs_mark_ordered_extent_truncated(), and utilize that helper to mark the direct IO ordered extent as truncated, so it won't cause failure for the later buffered fallback. [REASON FOR NO FIXES TAG] The bug itself is pretty old, at commit f85781fb505e ("btrfs: switch to iomap for direct IO") we're already passing @uptodate=false finishing the OE. But at that time OE with IOERR won't call mapping_set_error(), so it's not exposed. Later commit d61bec08b904 ("btrfs: mark ordered extent and inode with error if we fail to finish") finally exposed the bug, but that commit is doing a correct job, not the root cause. Anyway the bug is very old, dating back to 5.1x days, thus only CC to stable. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Boris Burkov Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 03500c11376269ebbbc5e05ed3db3336c8b4d81e Author: Ahsan Atta Date: Mon Jul 20 16:18:53 2026 -0400 crypto: qat - fix restarting state leak on allocation failure [ Upstream commit 7d3ed20f7e46b3e991936fedd7a28f3ff4aec8d2 ] In adf_dev_aer_schedule_reset(), ADF_STATUS_RESTARTING is set before allocating reset_data. If the allocation fails, the function returns -ENOMEM without queuing reset work, so nothing ever clears the bit. This leaves the device permanently stuck in the restarting state, causing all subsequent reset attempts to be silently skipped. Fix this by using test_and_set_bit() to atomically claim the RESTARTING state, preventing duplicate reset scheduling races under concurrent fatal error reporting. If the subsequent allocation fails, clear the bit to restore clean state so future reset attempts can proceed. Cc: stable@vger.kernel.org Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework") Signed-off-by: Ahsan Atta Co-developed-by: Maksim Lukoshkov Signed-off-by: Maksim Lukoshkov Reviewed-by: Giovanni Cabiddu Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 210af872eafa0cf572a84cb303c0f9d2914c1226 Author: Qu Wenruo Date: Mon Jul 20 14:30:07 2026 -0400 btrfs: do not trim a device which is not writeable [ Upstream commit 1b1937eb08f51319bf71575484cde2b8c517aedc ] [BUG] There is a bug report that btrfs/242 can randomly fail with the following NULL pointer dereference: run fstests btrfs/242 at 2026-06-01 10:25:08 BTRFS: device fsid d4d7f234-487c-4787-88e4-47a8b68c9874 devid 1 transid 9 /dev/sdc (8:32) scanned by mount (122609) BTRFS info (device sdc): first mount of filesystem d4d7f234-487c-4787-88e4-47a8b68c9874 BTRFS info (device sdc): using crc32c checksum algorithm BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS warning (device sdc): devid 2 uuid fbe72d72-3272-482d-80fb-ab88ed398192 is missing BTRFS info (device sdc): allowing degraded mounts BTRFS info (device sdc): turning on async discard BTRFS info (device sdc): enabling free space tree Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 user pgtable: 4k pages, 48-bit VAs, pgdp=000000013fd6b000 CPU: 4 UID: 0 PID: 122625 Comm: fstrim Not tainted 7.0.10-2-default #1 PREEMPT(full) openSUSE Tumbleweed e9a5f6b24978fba3bf015a992f865837fdfff3dd Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025 pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_trim_fs+0x34c/0xa00 [btrfs] lr : btrfs_trim_fs+0x1f0/0xa00 [btrfs] Call trace: btrfs_trim_fs+0x34c/0xa00 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] (P) btrfs_ioctl_fitrim+0xe8/0x178 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] btrfs_ioctl+0xdd4/0x2bd8 [btrfs f02c1d570ceea621c69d302ba75dd61868083840] __arm64_sys_ioctl+0xac/0x108 invoke_syscall.constprop.0+0x5c/0xd0 el0_svc_common.constprop.0+0x40/0xf0 do_el0_svc+0x24/0x40 el0_svc+0x40/0x1d0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 Code: 17ffff83 f94017e0 f9002be0 f9402ea0 (f9400c00) ---[ end trace 0000000000000000 ]--- Also the reporter is very kind to test the following ASSERT() added to btrfs_trim_free_extents_throttle(): ASSERT(device->bdev, "devid=%llu path=%s dev_state=0x%lx\n", device->devid, btrfs_dev_name(device), device->dev_state); And it shows the following output: assertion failed: device->bdev, in extent-tree.c:6630 (devid=2 path=/dev/sdd dev_state=0x82) Which means the device->bdev is NULL, and the dev_state is BTRFS_DEV_STATE_IN_FS_METADATA | BTRFS_DEV_STATE_ITEM_FOUND, without BTRFS_DEV_STATE_WRITEABLE flag set. [CAUSE] The pc points to the following call chain: btrfs_trim_fs() |- btrfs_trim_free_extents() |- btrfs_trim_free_extents_throttle() |- bdev_max_discard_sectors(device->bdev) So the NULL pointer dereference is caused by device->bdev being NULL. This looks impossible by a quick glance, as just before calling btrfs_trim_free_extents_throttle(), we have skipped any device that has BTRFS_DEV_STATE_MISSING flag set. However in this particular case, there is a window where the missing device is later re-scanned, causing btrfs to remove the BTRFS_DEV_STATE_MISSING flag: btrfs_control_ioctl() |- btrfs_scan_one_device() |- device_list_add() |- rcu_assign_pointer(device->name, name); | This updates the missing device's path to the new good path. | |- clear_bit(BTRFS_DEV_STATE_MISSING, &device->dev_state) This removes the BTRFS_DEV_STATE_MISSING flag. This allows the missing device to re-appear and clear the BTRFS_DEV_STATE_MISSING flag. However the device still does not have the BTRFS_DEV_STATE_WRITEABLE flag set, nor is its bdev pointer updated. The bdev pointer remains NULL, triggering the crash later. [FIX] This is a big de-synchronization between BTRFS_DEV_STATE_MISSING and device->bdev pointer, and shows a gap in btrfs's re-appearing-device handling. The proper handling of re-appearing device will need quite some extra work, which is out of the context of this small fix. Thankfully the regular bbio submission path has already handled it well by checking if the device->bdev is NULL before submitting. So here we just fix the crash by checking if the device is writeable and has a bdev pointer before calling bdev_max_discard_sectors(). Reported-by: Su Yue Link: https://lore.kernel.org/linux-btrfs/wlwir19t.fsf@damenly.org/ Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 58f46e17819dedc1d8ab032f65d973fafc89d1b0 Author: Neill Kapron Date: Mon Jul 20 11:48:25 2026 -0400 usb: gadget: f_fs: Tie read_buffer lifetime to ffs_epfile [ Upstream commit 8bdcf96eb135aebacac319667f87db034fb38406 ] Currently, ffs_epfile_release unconditionally frees the endpoint's read_buffer when a file descriptor is closed. If userspace explicitly opens the endpoint multiple times and closes one, the read_buffer is destroyed. This can lead to silent data loss if other file descriptors are still actively reading from the endpoint. By tying the lifetime of the read_buffer to the ffs_epfile structure itself (which is destroyed when the functionfs instance is torn down in ffs_epfiles_destroy), we eliminate the brittle dependency on open/release calls while correctly matching the conceptual lifetime of unread data on the hardware endpoint. Fixes: 9353afbbfa7b ("usb: gadget: f_fs: buffer data from ‘oversized’ OUT requests") Cc: stable Assisted-by: Antigravity:gemini-3.1-pro Signed-off-by: Neill Kapron Link: https://patch.msgid.link/20260619040609.4010746-3-nkapron@google.com Signed-off-by: Greg Kroah-Hartman [ adjusted context in ffs_epfiles_destroy() since 6.12 lacks the simple_remove_by_name() rework and still uses dentry-based cleanup ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 87e637382015f197e9c2d3a88725abf4067bfe82 Author: Thorsten Blum Date: Mon Jul 20 11:00:51 2026 -0400 crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A [ Upstream commit ea5e57cc97185329dcc5ebdcaae7e1500bf0ad0b ] Commit 8006aff15516 ("crypto: atmel-sha204a - Set hwrng quality to lowest possible") reduced the hwrng quality to 1 based on a review by Bill Cox [1]. However, despite its title, the review only tested the ATSHA204, not the ATSHA204A. In the same thread, Atmel engineer Landon Cox wrote "this behavior has been eliminated entirely"[2] in the ATSHA204A and "this problem does not affect the ATECC108 or the ATECC108A (or the ATSHA204A)"[3]. According to the official ATSHA204A datasheet [4], the device contains a high-quality hardware RNG that combines its output with an internal seed value stored in EEPROM or SRAM to generate random numbers. The device also implements all security functions using SHA-256, and the driver uses the chip's Random command in seed-update mode. Keep 'quality = 1' for ATSHA204, but drop the explicit hwrng quality reduction for ATSHA204A and fall back to the hwrng core default. [1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html [2] https://www.metzdowd.com/pipermail/cryptography/2014-December/023852.html [3] https://www.metzdowd.com/pipermail/cryptography/2014-December/023886.html [4] https://ww1.microchip.com/downloads/en/DeviceDoc/ATSHA204A-Data-Sheet-40002025A.pdf Fixes: 8006aff15516 ("crypto: atmel-sha204a - Set hwrng quality to lowest possible") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Reviewed-by: Ard Biesheuvel Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a24187cfe88f15098e3bc2d7da07ba12c4e3cce5 Author: Uwe Kleine-König Date: Mon Jul 20 11:00:50 2026 -0400 crypto: atmel - Drop explicit initialization of struct i2c_device_id::driver_data to 0 [ Upstream commit d86ad3911a5d4549297ed810ee450e5772fd665f ] These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König Signed-off-by: Herbert Xu Stable-dep-of: ea5e57cc9718 ("crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cb08d62ca8c98b970b54da7d9426afca6f7d0921 Author: Krzysztof Kozlowski Date: Mon Jul 20 11:00:49 2026 -0400 crypto: atmel-sha204a - Mark OF related data as maybe unused [ Upstream commit 75f3d950054389e2556277e42170e37dd97cd872 ] The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/crypto/atmel-sha204a.c:129:34: error: ‘atmel_sha204a_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski Signed-off-by: Herbert Xu Stable-dep-of: ea5e57cc9718 ("crypto: atmel-sha204a - drop hwrng quality reduction for ATSHA204A") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0de6ebbabfbbc9c28350283dc97d8a519d5c6dd7 Author: Tyler Baker Date: Mon Jul 20 09:55:05 2026 -0400 usb: gadget: f_fs: initialize reset_work at allocation time [ Upstream commit 3137b243c93982fe3460335e12f9247739766e10 ] ffs_fs_kill_sb() unconditionally calls cancel_work_sync() on ffs->reset_work when a functionfs instance is unmounted: ffs_data_reset(ffs); cancel_work_sync(&ffs->reset_work); However ffs->reset_work is only ever initialized via INIT_WORK() in ffs_func_set_alt() and ffs_func_disable(), and only on the FFS_DEACTIVATED path. That state is reached solely by ffs_data_closed() when the instance is mounted with the "no_disconnect" option, so for the common case (no "no_disconnect", or mounted and unmounted without ever being deactivated) reset_work is never initialized. ffs_data_new() allocates the ffs_data with kzalloc_obj() and does not initialize reset_work, and ffs_data_reset()/ffs_data_clear() do not touch it either, so reset_work.func is left NULL. cancel_work_sync() on such a work then trips the WARN_ON(!work->func) guard in __flush_work(): WARNING: kernel/workqueue.c:4301 at __flush_work+0x330/0x360, CPU#3: umount Call trace: __flush_work cancel_work_sync ffs_fs_kill_sb [usb_f_fs] deactivate_locked_super deactivate_super cleanup_mnt __cleanup_mnt task_work_run exit_to_user_mode_loop el0_svc On older kernels cancel_work_sync() on a zero-initialized work struct was a silent no-op, which hid the missing initialization. Initialize reset_work once in ffs_data_new() so it is always valid for the lifetime of the ffs_data, and drop the now-redundant INIT_WORK() calls from the two deactivation paths. Fixes: 18d6b32fca38 ("usb: gadget: f_fs: add "no_disconnect" mode") Cc: stable Signed-off-by: Tyler Baker Cc: Loic Poulain Cc: Dmitry Baryshkov Cc: Srinivas Kandagatla Tested-by: Loic Poulain Reviewed-by: Peter Chen Acked-by: Michał Nazarewicz Link: https://patch.msgid.link/20260609193635.2284430-1-tyler.baker@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman [ dropped the ffs_func_disable hunk since 6.6 predates the disable-body split and routes disable through ffs_func_set_alt, so removing the single lazy INIT_WORK there covers both paths ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 57d884c8d46d24c9a4f06c5610bb7b41fcb61566 Author: Andy Yan Date: Sun Jul 19 22:25:44 2026 -0400 usb: typec: tcpm: Fix VDM type for Enter Mode commands [ Upstream commit 9cff680e47632b7723cb19f9c5e63669063c3417 ] VDO() second parameter is VDM type (bit 15): 1 for SVDM, 0 for UVDM. Using 'vdo ? 2 : 1' corrupts SVID low bit when vdo is non-NULL (2 << 15 = BIT(16)). Enter Mode is always SVDM, hardcode to 1. Fixes: 8face9aa57c8 ("usb: typec: Add parameter for the VDO to typec_altmode_enter()") Cc: stable Signed-off-by: Andy Yan Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260604105059.18750-1-andyshrk@163.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 76861031b43a18065d13f9ffb8595d25c7576005 Author: Mauricio Faria de Oliveira Date: Sun Jul 19 22:25:41 2026 -0400 usb: atm: ueagle-atm: wait for pre-firmware load in .disconnect() [ Upstream commit e2674dfbed8a30d57e2bc872c4bfa6c3eec918bf ] ueagle-atm uses the asynchronous request_firmware_nowait() in .probe(), but does not wait for its completion, not even in .disconnect(); so, if the device is unplugged meanwhile, its teardown runs concurrently with that. Even though this inconsistency is worth addressing on its own, it has also triggered several bug reports in syzbot over the years (some auto-closed) where the firmware sysfs fallback mechanism (CONFIG_FW_LOADER_USER_HELPER) creates a firmware subdirectory in the device directory during its removal, which might hit unexpected conditions in kernfs, apparently, depending at which point the add and remove operations raced. (See links.) The pattern is: usb ?-?: Direct firmware load for ueagle-atm/eagle?.fw failed with error -2 usb ?-?: Falling back to sysfs fallback for: ueagle-atm/eagle?.fw Call trace: ... kernfs_create_dir_ns sysfs_create_dir_ns create_dir kobject_add_internal kobject_add_varg kobject_add class_dir_create_and_add get_device_parent device_add fw_load_sysfs_fallback fw_load_from_user_helper firmware_fallback_sysfs _request_firmware request_firmware_work_func ... (Some variations are observed, after fw_load_sysfs_fallback(), e.g., [1].) While the kernfs side is being looked at, the ueagle-atm side can be fixed by waiting for the pre-firmware load in the .disconnect() handler. This change has a similar approach to previous work by Andrey Tsygunka [2] (wait_for_completion() in .disconnect()), but it is relatively different in design/implementation; using the Originally-by tag for credit assignment. This has been tested with: - synthetic reproducer to check the error path; - USB gadget (virtual device) to check the firmware upload path; - QEMU device emulator to check the device ID re-enumeration path; (The latter two were written by Claude; no other code/text in this commit.) Links (year first reported): 2025 https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d 2025 https://syzbot.org/bug?extid=9af8471255ac36e34fd4 2024 https://syzbot.org/bug?extid=306212936b13e520679d 2023 https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 2022 https://syzbot.org/bug?extid=782984d6f1701b526edb 2021 https://syzbot.org/bug?id=f3f221579f4ef7e9691281f3c6f56c05f83e8490 2021 https://syzbot.org/bug?id=84d86f0d71394829df6fc53daf6642c045983881 2021 https://syzbot.org/bug?id=3302dc1c0e2b9c94f2e8edb404eabc9267bc6f90 [1] https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 [2] https://lore.kernel.org/lkml/20250410093146.3776801-2-aitsygunka@yandex.ru/ Cc: stable Reported-by: syzbot+ce1e5a1b4e086b43e56d@syzkaller.appspotmail.com Closes: https://syzbot.org/bug?extid=ce1e5a1b4e086b43e56d Reported-by: syzbot+306212936b13e520679d@syzkaller.appspotmail.com Closes: https://syzbot.org/bug?extid=306212936b13e520679d Reported-by: syzbot+457452d30bcdda75ead2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=457452d30bcdda75ead2 Originally-by: Andrey Tsygunka Fixes: b72458a80c75 ("[PATCH] USB: Eagle and ADI 930 usb adsl modem driver") Assisted-by: Claude:claude-opus-4.7 # usb gadget & qemu device for testing Signed-off-by: Mauricio Faria de Oliveira Acked-by: Stanislaw Gruszka Link: https://patch.msgid.link/20260526-ueagle-atm_req-fw-sync-v3-1-93c01961daaf@igalia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 99381e762273a2410a3f0216000be32b013c0ea9 Author: Fan Wu Date: Sun Jul 19 22:25:37 2026 -0400 usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove [ Upstream commit 1f0bdc2884b67de337215079bba166df0cdf4ac5 ] The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis. Fixes: e32fd989ac1c ("usb: typec: ucsi: ccg: Move to the new API") Cc: stable Signed-off-by: Fan Wu Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260616132011.103279-1-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fc99a77aa2bd32104976b0eacc8b369ff2227ecd Author: Uwe Kleine-König Date: Sun Jul 19 22:25:36 2026 -0400 gpio: pca953x: Make platform teardown callback return void [ Upstream commit 6a8f359c3132e4f51bdb263ad74ec632c65e55fd ] All platforms that provide a teardown callback return 0. New users are supposed to not make use of platform support, so there is no functionality lost. This patch is a preparation for making i2c remove callbacks return void. Reviewed-by: Andy Shevchenko Signed-off-by: Uwe Kleine-König Acked-by: Bartosz Golaszewski Signed-off-by: Wolfram Sang Stable-dep-of: 1f0bdc2884b6 ("usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 51fca19e14bc10208c423a3cbd25fadb16a1f6d8 Author: Uwe Kleine-König Date: Sun Jul 19 22:25:35 2026 -0400 leds: lm3601x: Improve error reporting for problems during .remove() [ Upstream commit 22a23436891886a66d21af3619f4a4e8809f0e0a ] Returning an error value in an i2c remove callback results in a generic error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. So instead of triggering the generic i2c error message, emit a more helpful message if a problem occurs and return 0 to suppress the generic message. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Stable-dep-of: 1f0bdc2884b6 ("usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4e7ecf8e921765ff526017c011f5d470c2d2dbf2 Author: Uwe Kleine-König Date: Sun Jul 19 22:25:34 2026 -0400 leds: lm3697: Remove duplicated error reporting in .remove() [ Upstream commit af89fa11fae1cee4e07453f780e6e5573ef0f477 ] Returning an error value from an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. As lm3697_remove() already emits an error message on failure and the additional error message by the i2c core doesn't add any useful information, don't pass the error value up the stack. Instead continue to clean up and return 0. This patch is a preparation for making i2c remove callbacks return void. Acked-by: Pavel Machek Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Stable-dep-of: 1f0bdc2884b6 ("usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b91498cc8d8541dae194759a8d70d18a124a0c09 Author: Uwe Kleine-König Date: Sun Jul 19 22:25:33 2026 -0400 drm/i2c/sil164: Drop no-op remove function [ Upstream commit eb09882d64807c24228ed1d005dbbae70860ca3f ] A remove callback that just returns 0 is equivalent to no callback at all as can be seen in i2c_device_remove(). So simplify accordingly. Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Stable-dep-of: 1f0bdc2884b6 ("usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a4db62797a350d7b35ee904a843b0672810044a1 Author: Oliver Neukum Date: Sun Jul 19 12:31:12 2026 -0400 usb: iowarrior: remove inherent race with minor number [ Upstream commit 56dd29088c9d9510c48a8ebad2465248fde36551 ] The driver saves the minor number it gets upon registration in its descriptor for debugging purposes. However, there is inevitably a window between registration and saving the correct minor in a descriptor. During this window the debugging output will be wrong. As wrong debug output is worse than no debug output, just remove it. Signed-off-by: Oliver Neukum Link: https://patch.msgid.link/20260312094619.1590556-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: c602254ba4c1 ("USB: iowarrior: fix use-after-free on disconnect race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f0967d4f1ba4323a3cb7dc8fdba74dd3a8caaf04 Author: Vlad Poenaru Date: Sat Jul 18 17:50:21 2026 -0400 bpf: Allow LPM map access from sleepable BPF programs [ Upstream commit 2f884d371fafea137afea504d49ee4a7c8d7985b ] trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A sleepable LSM hook that ends up touching an LPM trie therefore triggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E ----------------------------- kernel/bpf/lpm_trie.c:249 suspicious rcu_dereference_check() usage! 1 lock held by net_tests/540: #0: (rcu_tasks_trace_srcu_struct){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x26/0x280 Call Trace: dump_stack_lvl lockdep_rcu_suspicious trie_lookup_elem bpf_prog_..._enforce_security_socket_connect bpf_trampoline_... security_socket_connect __sys_connect do_syscall_64 This is lockdep-only -- no UAF, since Tasks Trace RCU does serialize against the trie's reclaim path -- but it spams the console once per distinct callsite on every debug kernel running a sleepable BPF LSM that touches an LPM trie, which is increasingly common. For the lookup path, switch the rcu_dereference_check() annotation from rcu_read_lock_bh_held() to bpf_rcu_lock_held(), which accepts all three contexts (classic, BH, Tasks Trace). Other map types already follow this convention. For trie_update_elem() and trie_delete_elem(), annotate the walks as rcu_dereference_protected(*p, 1) -- matching trie_free() in the same file -- since trie->lock is held across the walk. rqspinlock has no lockdep_map, so the predicate degenerates to '1' rather than lockdep_is_held(&trie->lock); the protection is real but not machine-verifiable. trie_get_next_key() also uses bare rcu_dereference() but is reachable only from the BPF syscall, which holds classic rcu_read_lock() before dispatching, so it is left untouched. Fixes: 694cea395fde ("bpf: Allow RCU-protected lookups to happen from bh context") Cc: stable@vger.kernel.org Signed-off-by: Vlad Poenaru Reviewed-by: Emil Tsalapatis Link: https://lore.kernel.org/r/20260609135558.193287-2-vlad.wing@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d841f14eeba341c0ae3f8c554a538519c5166350 Author: Andrii Nakryiko Date: Sat Jul 18 17:50:20 2026 -0400 bpf: Consistently use bpf_rcu_lock_held() everywhere [ Upstream commit 48a97ffc6c826640907d13b199e29008f4fe2c15 ] We have many places which open-code what's now is bpf_rcu_lock_held() macro, so replace all those places with a clean and short macro invocation. For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h. Signed-off-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann Acked-by: Jiri Olsa Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org Stable-dep-of: 2f884d371faf ("bpf: Allow LPM map access from sleepable BPF programs") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 7c62162651302b8d940dd027bd2cbc2e336866ff Author: Kumar Kartikeya Dwivedi Date: Sat Jul 18 17:50:19 2026 -0400 bpf: Convert lpm_trie.c to rqspinlock [ Upstream commit 47979314c0fe245ed54306e2f91b3f819c7c0f9f ] Convert all LPM trie usage of raw_spinlock to rqspinlock. Note that rcu_dereference_protected in trie_delete_elem is switched over to plain rcu_dereference, the RCU read lock should be held from BPF program side or eBPF syscall path, and the trie->lock is just acquired before the dereference. It is not clear the reason the protected variant was used from the commit history, but the above reasoning makes sense so switch over. Closes: https://lore.kernel.org/lkml/000000000000adb08b061413919e@google.com Signed-off-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20250316040541.108729-22-memxor@gmail.com Signed-off-by: Alexei Starovoitov Stable-dep-of: 2f884d371faf ("bpf: Allow LPM map access from sleepable BPF programs") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 47baddc856ae7e93a565dd9deeb797999b179466 Author: Zhao Zhang Date: Sat Jul 18 12:31:12 2026 -0400 bpf: Reject fragmented frames in devmap [ Upstream commit aa496720618f1a6054f1c870bf10b4f6c99bf656 ] Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP. Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Zhao Zhang Signed-off-by: Ren Wei Reviewed-by: Emil Tsalapatis Reviewed-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/21c2d153dd25603d359069a02bf06779b51f6423.1780385378.git.zzhan461@ucr.edu Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 890ed64a0b631401e9380bd25f63dfcc8d279ca4 Author: Lorenzo Bianconi Date: Sat Jul 18 12:31:11 2026 -0400 xdp: introduce flags field in xdp_buff/xdp_frame [ Upstream commit 2e88d4ff03013937028f5397268b21e10cf68713 ] Introduce flags field in xdp_frame and xdp_buffer data structures to define additional buffer features. At the moment the only supported buffer feature is frags bit (XDP_FLAGS_HAS_FRAGS). frags bit is used to specify if this is a linear buffer (XDP_FLAGS_HAS_FRAGS not set) or a frags frame (XDP_FLAGS_HAS_FRAGS set). In the latter case the driver is expected to initialize the skb_shared_info structure at the end of the first buffer to link together subsequent buffers belonging to the same frame. Acked-by: Toke Hoiland-Jorgensen Acked-by: John Fastabend Acked-by: Jesper Dangaard Brouer Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/e389f14f3a162c0a5bc6a2e1aa8dd01a90be117d.1642758637.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov Stable-dep-of: aa496720618f ("bpf: Reject fragmented frames in devmap") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fc9d1447ca3cdc78d2e4ace1ce1f3a7c77ca08b1 Author: Tristan Madani Date: Sat Jul 18 07:44:27 2026 -0400 hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length [ Upstream commit 966cb76fb2857a4242cab6ea2ea17acf818a3da7 ] check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward. Reported-by: syzbot+6df204b70bf3261691c5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6df204b70bf3261691c5 Tested-by: syzbot+6df204b70bf3261691c5@syzkaller.appspotmail.com Reported-by: syzbot+e76bf3d19b85350571ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e76bf3d19b85350571ac Tested-by: syzbot+e76bf3d19b85350571ac@syzkaller.appspotmail.com Fixes: a431930c9bac ("hfs: fix slab-out-of-bounds in hfs_bnode_read()") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Reviewed-by: Viacheslav Dubeyko Signed-off-by: Viacheslav Dubeyko Link: https://lore.kernel.org/r/20260505111300.3592757-2-tristmd@gmail.com Signed-off-by: Viacheslav Dubeyko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1658f5f5b5bd847a06ea65d202be7a9d7d5d4817 Author: Viacheslav Dubeyko Date: Sat Jul 18 07:44:26 2026 -0400 hfs/hfsplus: prevent getting negative values of offset/length [ Upstream commit 00c14a09a70e10ae18eb3707d0059291425c04bd ] The syzbot reported KASAN out-of-bounds issue in hfs_bnode_move(): [ 45.588165][ T9821] hfs: dst 14, src 65536, len -65536 [ 45.588895][ T9821] ================================================================== [ 45.590114][ T9821] BUG: KASAN: out-of-bounds in hfs_bnode_move+0xfd/0x140 [ 45.591127][ T9821] Read of size 18446744073709486080 at addr ffff888035935400 by task repro/9821 [ 45.592207][ T9821] [ 45.592420][ T9821] CPU: 0 UID: 0 PID: 9821 Comm: repro Not tainted 6.16.0-rc7-dirty #42 PREEMPT(full) [ 45.592428][ T9821] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 45.592431][ T9821] Call Trace: [ 45.592434][ T9821] [ 45.592437][ T9821] dump_stack_lvl+0x1c1/0x2a0 [ 45.592446][ T9821] ? __virt_addr_valid+0x1c8/0x5c0 [ 45.592454][ T9821] ? __pfx_dump_stack_lvl+0x10/0x10 [ 45.592461][ T9821] ? rcu_is_watching+0x15/0xb0 [ 45.592469][ T9821] ? lock_release+0x4b/0x3e0 [ 45.592476][ T9821] ? __virt_addr_valid+0x1c8/0x5c0 [ 45.592483][ T9821] ? __virt_addr_valid+0x4a5/0x5c0 [ 45.592491][ T9821] print_report+0x17e/0x7c0 [ 45.592497][ T9821] ? __virt_addr_valid+0x1c8/0x5c0 [ 45.592504][ T9821] ? __virt_addr_valid+0x4a5/0x5c0 [ 45.592511][ T9821] ? __phys_addr+0xd3/0x180 [ 45.592519][ T9821] ? hfs_bnode_move+0xfd/0x140 [ 45.592526][ T9821] kasan_report+0x147/0x180 [ 45.592531][ T9821] ? _printk+0xcf/0x120 [ 45.592537][ T9821] ? hfs_bnode_move+0xfd/0x140 [ 45.592544][ T9821] ? hfs_bnode_move+0xfd/0x140 [ 45.592552][ T9821] kasan_check_range+0x2b0/0x2c0 [ 45.592557][ T9821] ? hfs_bnode_move+0xfd/0x140 [ 45.592565][ T9821] __asan_memmove+0x29/0x70 [ 45.592572][ T9821] hfs_bnode_move+0xfd/0x140 [ 45.592580][ T9821] hfs_brec_remove+0x473/0x560 [ 45.592589][ T9821] hfs_cat_move+0x6fb/0x960 [ 45.592598][ T9821] ? __pfx_hfs_cat_move+0x10/0x10 [ 45.592607][ T9821] ? seqcount_lockdep_reader_access+0x122/0x1c0 [ 45.592614][ T9821] ? lockdep_hardirqs_on+0x9c/0x150 [ 45.592631][ T9821] ? __lock_acquire+0xaec/0xd80 [ 45.592641][ T9821] hfs_rename+0x1dc/0x2d0 [ 45.592649][ T9821] ? __pfx_hfs_rename+0x10/0x10 [ 45.592657][ T9821] vfs_rename+0xac6/0xed0 [ 45.592664][ T9821] ? __pfx_vfs_rename+0x10/0x10 [ 45.592670][ T9821] ? d_alloc+0x144/0x190 [ 45.592677][ T9821] ? bpf_lsm_path_rename+0x9/0x20 [ 45.592683][ T9821] ? security_path_rename+0x17d/0x490 [ 45.592691][ T9821] do_renameat2+0x890/0xc50 [ 45.592699][ T9821] ? __pfx_do_renameat2+0x10/0x10 [ 45.592707][ T9821] ? getname_flags+0x1e5/0x540 [ 45.592714][ T9821] __x64_sys_rename+0x82/0x90 [ 45.592720][ T9821] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 45.592725][ T9821] do_syscall_64+0xf3/0x3a0 [ 45.592741][ T9821] ? exc_page_fault+0x9f/0xf0 [ 45.592748][ T9821] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 45.592754][ T9821] RIP: 0033:0x7f7f73fe3fc9 [ 45.592760][ T9821] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48 [ 45.592765][ T9821] RSP: 002b:00007ffc7e116cf8 EFLAGS: 00000283 ORIG_RAX: 0000000000000052 [ 45.592772][ T9821] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7f73fe3fc9 [ 45.592776][ T9821] RDX: 0000200000000871 RSI: 0000200000000780 RDI: 00002000000003c0 [ 45.592781][ T9821] RBP: 00007ffc7e116d00 R08: 0000000000000000 R09: 00007ffc7e116d30 [ 45.592784][ T9821] R10: fffffffffffffff0 R11: 0000000000000283 R12: 00005557e81f8250 [ 45.592788][ T9821] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 45.592795][ T9821] [ 45.592797][ T9821] [ 45.619721][ T9821] The buggy address belongs to the physical page: [ 45.620300][ T9821] page: refcount:1 mapcount:1 mapping:0000000000000000 index:0x559a88174 pfn:0x35935 [ 45.621150][ T9821] memcg:ffff88810a1d5b00 [ 45.621531][ T9821] anon flags: 0xfff60000020838(uptodate|dirty|lru|owner_2|swapbacked|node=0|zone=1|lastcpupid=0x7ff) [ 45.622496][ T9821] raw: 00fff60000020838 ffffea0000d64d88 ffff888021753e10 ffff888029da0771 [ 45.623260][ T9821] raw: 0000000559a88174 0000000000000000 0000000100000000 ffff88810a1d5b00 [ 45.624030][ T9821] page dumped because: kasan: bad access detected [ 45.624602][ T9821] page_owner tracks the page as allocated [ 45.625115][ T9821] page last allocated via order 0, migratetype Movable, gfp_mask 0x140dca(GFP_HIGHUSER_MOVABLE|__GFP_ZERO0 [ 45.626685][ T9821] post_alloc_hook+0x240/0x2a0 [ 45.627127][ T9821] get_page_from_freelist+0x2101/0x21e0 [ 45.627628][ T9821] __alloc_frozen_pages_noprof+0x274/0x380 [ 45.628154][ T9821] alloc_pages_mpol+0x241/0x4b0 [ 45.628593][ T9821] vma_alloc_folio_noprof+0xe4/0x210 [ 45.629066][ T9821] folio_prealloc+0x30/0x180 [ 45.629487][ T9821] __handle_mm_fault+0x34bd/0x5640 [ 45.629957][ T9821] handle_mm_fault+0x40e/0x8e0 [ 45.630392][ T9821] do_user_addr_fault+0xa81/0x1390 [ 45.630862][ T9821] exc_page_fault+0x76/0xf0 [ 45.631273][ T9821] asm_exc_page_fault+0x26/0x30 [ 45.631712][ T9821] page last free pid 5269 tgid 5269 stack trace: [ 45.632281][ T9821] free_unref_folios+0xc73/0x14c0 [ 45.632740][ T9821] folios_put_refs+0x55b/0x640 [ 45.633177][ T9821] free_pages_and_swap_cache+0x26d/0x510 [ 45.633685][ T9821] tlb_flush_mmu+0x3a0/0x680 [ 45.634105][ T9821] tlb_finish_mmu+0xd4/0x200 [ 45.634525][ T9821] exit_mmap+0x44c/0xb70 [ 45.634914][ T9821] __mmput+0x118/0x420 [ 45.635286][ T9821] exit_mm+0x1da/0x2c0 [ 45.635659][ T9821] do_exit+0x652/0x2330 [ 45.636039][ T9821] do_group_exit+0x21c/0x2d0 [ 45.636457][ T9821] __x64_sys_exit_group+0x3f/0x40 [ 45.636915][ T9821] x64_sys_call+0x21ba/0x21c0 [ 45.637342][ T9821] do_syscall_64+0xf3/0x3a0 [ 45.637756][ T9821] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 45.638290][ T9821] page has been migrated, last migrate reason: numa_misplaced [ 45.638956][ T9821] [ 45.639173][ T9821] Memory state around the buggy address: [ 45.639677][ T9821] ffff888035935300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.640397][ T9821] ffff888035935380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.641117][ T9821] >ffff888035935400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.641837][ T9821] ^ [ 45.642207][ T9821] ffff888035935480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.642929][ T9821] ffff888035935500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 45.643650][ T9821] ================================================================== This commit [1] fixes the issue if an offset inside of b-tree node or length of the request is bigger than b-tree node. However, this fix is still not ready for negative values of the offset or length. Moreover, negative values of the offset or length doesn't make sense for b-tree's operations. Because we could try to access the memory address outside of the beginning of memory page's addresses range. Also, using of negative values make logic very complicated, unpredictable, and we could access the wrong item(s) in the b-tree node. This patch changes b-tree interface by means of converting signed integer arguments of offset and length on u32 type. Such conversion has goal to prevent of using negative values unintentionally or by mistake in b-tree operations. [1] 'commit a431930c9bac ("hfs: fix slab-out-of-bounds in hfs_bnode_read()")' Signed-off-by: Viacheslav Dubeyko cc: John Paul Adrian Glaubitz cc: Yangtao Li cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20251002200020.2578311-1-slava@dubeyko.com Signed-off-by: Viacheslav Dubeyko Stable-dep-of: 966cb76fb285 ("hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 007021005d8f2aa4654c181b21be44021ade9fab Author: Yousef Alhouseen Date: Fri Jul 17 21:33:35 2026 -0400 xfs: use null daddr for unset first bad log block [ Upstream commit cc9af5e461ea5f6e37738f3f1e41c45a9b7f45d6 ] xlog_do_recovery_pass() may return before setting first_bad. The caller must distinguish that case from an error at a valid log block, including block zero after the log wraps. Initialize first_bad to XFS_BUF_DADDR_NULL and test it explicitly before treating the error as a torn write. Fixes: 7088c4136fa1 ("xfs: detect and trim torn writes during log recovery") Suggested-by: Darrick J. Wong Reported-by: syzbot+b7dfbed0c6c2b5e9fd34@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b7dfbed0c6c2b5e9fd34 Cc: stable@vger.kernel.org # v4.5 Signed-off-by: Yousef Alhouseen Reviewed-by: "Darrick J. Wong" Signed-off-by: Carlos Maiolino Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ee94ca3cdcef1ef53ca852848a65f5f5f7249053 Author: Jiapeng Chong Date: Fri Jul 17 21:33:34 2026 -0400 xfs: Remove dead code [ Upstream commit e62c720817597f259b81f1ff004eb042293bf046 ] Remove tht entire xlog_recover_check_summary() function, this entire function is dead code and has been for 12 years. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Reviewed-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner Stable-dep-of: cc9af5e461ea ("xfs: use null daddr for unset first bad log block") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a1dd63eab34f64793a2841fe073e6241feef0307 Author: Jiapeng Chong Date: Fri Jul 17 21:33:33 2026 -0400 xfs: Remove redundant assignment of mp [ Upstream commit f4901a182d33d05a3b7020e2af97c635f6c47959 ] mp is being initialized to log->l_mp but this is never read as record is overwritten later on. Remove the redundant assignment. Cleans up the following clang-analyzer warning: fs/xfs/xfs_log_recover.c:3543:20: warning: Value stored to 'mp' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Stable-dep-of: cc9af5e461ea ("xfs: use null daddr for unset first bad log block") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c7d190bb07bf4e3b217c69370e94d1b4c80a40ad Author: Andy Shevchenko Date: Fri Jul 17 20:59:58 2026 -0400 serial: 8250_mid: Disable DMA for selected platforms [ Upstream commit b1b4efea05a56c0995e4702a86d6624b4fdff32f ] In accordance with Errata (specification updates) HSUART May Stop Functioning when DMA is Active. - Denverton document #572409, rev 3.4, DNV60 - Ice Lake Xeon D document #714070, ICXD65 - Snowridge document #731931, SNR44 For a quick fix just disable the respective callbacks during the device probe. Depending on the future development we might remove them completely. Reported-by: micas-opensource Closes: https://lore.kernel.org/linux-serial/20250625031409.2404219-1-opensource@ruijie.com.cn/ Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO") Cc: stable Signed-off-by: Andy Shevchenko Link: https://patch.msgid.link/20260626094937.561776-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d7360c33d3cae6acbee1de87a3b64d9f1d7ef54b Author: Ilpo Järvinen Date: Fri Jul 17 20:59:57 2026 -0400 serial: 8250_mid: Remove 8250_pci usage [ Upstream commit a136abd7e7abe0f1247f8ffde6cc7c8ab09f985b ] 8250_mid uses FL_*BASE* from linux/8250_pci.h and nothing else. The code can be simplified by directly defining BARs within the driver instead. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230915094336.13278-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: b1b4efea05a5 ("serial: 8250_mid: Disable DMA for selected platforms") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3d30a0bb0e79621ae921b487835c56198adfafa3 Author: Manish Khadka Date: Fri Jul 17 14:11:59 2026 -0400 HID: appleir: fix UAF on pending key_up_timer in remove() [ Upstream commit 75fe87e19d8aff81eb2c64d15d244ab8da4de945 ] appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced. Fixes: 9a4a5574ce42 ("HID: appleir: add support for Apple ir devices") Cc: stable@vger.kernel.org Signed-off-by: Manish Khadka Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fa5072bd9004a1a82a737468477da1ccc9b75f2a Author: Thomas Gleixner Date: Fri Jul 17 14:11:58 2026 -0400 treewide: Switch/rename to timer_delete[_sync]() [ Upstream commit 8fa7292fee5c5240402371ea89ab285ec856c916 ] timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Stable-dep-of: 75fe87e19d8a ("HID: appleir: fix UAF on pending key_up_timer in remove()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d54f14655fd7d7b293698a8b6918563c4c0465e7 Author: Jann Horn Date: Fri Jul 17 14:11:49 2026 -0400 proc: protect ptrace_may_access() with exec_update_lock (part 1) [ Upstream commit 6650527444dadc63d84aa939d14ecba4fadb2f69 ] Fix the easy cases where procfs currently calls ptrace_may_access() without exec_update_lock protection, where the fix is to simply add the extra lock or use mm_access(): - do_task_stat(): grab exec_update_lock - proc_pid_wchan(): grab exec_update_lock - proc_map_files_lookup(): use mm_access() instead of get_task_mm() - proc_map_files_readdir(): use mm_access() instead of get_task_mm() - proc_ns_get_link(): grab exec_update_lock - proc_ns_readlink(): grab exec_update_lock Fixes: f83ce3e6b02d ("proc: avoid information leaks to non-privileged processes") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Link: https://patch.msgid.link/20260518-procfs-lockfix-part1-v1-1-5c3d20e0ac33@google.com Signed-off-by: Christian Brauner (Amutable) [ converted NULL return from mm_access() to ERR_PTR(-ESRCH) at call sites since 5.15's mm_access() returns NULL when the task has no mm ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 152983d87387f6a8ae72b73474cfa55fbcf1ec75 Author: Trung Nguyen Date: Fri Jul 17 10:34:47 2026 -0400 HID: multitouch: fix out-of-bounds bit access on mt_io_flags [ Upstream commit 8813b0612275cc61fe9e6603d0ee019247ade6be ] mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit. Fixes: 46f781e0d151 ("HID: multitouch: fix sticky fingers") Cc: stable@vger.kernel.org Signed-off-by: Trung Nguyen Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8c405cd1b9e03f7a9ac065e0972be5c2d278c821 Author: Angela Czubak Date: Fri Jul 17 10:34:46 2026 -0400 HID: add haptics page defines [ Upstream commit 5e0ae59159e3a07391a35865bb79ff335473fa79 ] Introduce haptic usages as defined in HID Usage Tables specification. Add HID units for newton and gram. Signed-off-by: Angela Czubak Co-developed-by: Jonathan Denose Signed-off-by: Jonathan Denose Signed-off-by: Benjamin Tissoires Stable-dep-of: 8813b0612275 ("HID: multitouch: fix out-of-bounds bit access on mt_io_flags") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 65bf0d2b6e914f1448d6a2fde193dcf60936a651 Author: Jann Horn Date: Fri Jul 17 10:00:16 2026 -0400 proc: protect ptrace_may_access() with exec_update_lock (FD links) [ Upstream commit 6255da28d4bb5349fe18e84cb043ccd394eba75d ] proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link(). Fixes: 778c1144771f ("[PATCH] proc: Use sane permission checks on the /proc//fd/ symlinks") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Link: https://patch.msgid.link/20260518-procfs-lockfix-part1-v1-2-5c3d20e0ac33@google.com Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 41a30c50320dfb61ec9d79c3a3d54178d2b9bbd8 Author: Christoph Hellwig Date: Fri Jul 17 10:00:15 2026 -0400 proc: rename proc_setattr to proc_nochmod_setattr [ Upstream commit 690005b0b1e6b567c88b7790e6d90d4d6c9e09cc ] What is currently proc_setattr is a special version added after the more general procfs ->seattr in commit 6d76fa58b050 ("Don't allow chmod() on the /proc// files"). Give it a name that reflects that to free the proc_setattr name and better describe what is doing. Signed-off-by: Christoph Hellwig Link: https://patch.msgid.link/20260325063711.3298685-5-hch@lst.de Reviewed-by: Jan Kara Signed-off-by: Christian Brauner Stable-dep-of: 6255da28d4bb ("proc: protect ptrace_may_access() with exec_update_lock (FD links)") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dede16962601f973120f24c95effd14b6e54fd6e Author: Tyler Hicks (Microsoft) Date: Fri Jul 17 10:00:14 2026 -0400 proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation [ Upstream commit 0a960ba49869ebe8ff859d000351504dd6b93b68 ] The following commits loosened the permissions of /proc//fdinfo/ directory, as well as the files within it, from 0500 to 0555 while also introducing a PTRACE_MODE_READ check between the current task and 's task: - commit 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ") - commit 1927e498aee1 ("procfs: prevent unprivileged processes accessing fdinfo dir") Before those changes, inode based system calls like inotify_add_watch(2) would fail when the current task didn't have sufficient read permissions: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0500, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied) [...] This matches the documented behavior in the inotify_add_watch(2) man page: ERRORS EACCES Read access to the given file is not permitted. After those changes, inotify_add_watch(2) started succeeding despite the current task not having PTRACE_MODE_READ privileges on the target task: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = 1757 openat(AT_FDCWD, "/proc/1/task/1/fdinfo", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 EACCES (Permission denied) [...] This change in behavior broke .NET prior to v7. See the github link below for the v7 commit that inadvertently/quietly (?) fixed .NET after the kernel changes mentioned above. Return to the old behavior by moving the PTRACE_MODE_READ check out of the file .open operation and into the inode .permission operation: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied) [...] Reported-by: Kevin Parsons (Microsoft) Link: https://github.com/dotnet/runtime/commit/89e5469ac591b82d38510fe7de98346cce74ad4f Link: https://stackoverflow.com/questions/75379065/start-self-contained-net6-build-exe-as-service-on-raspbian-system-unauthorizeda Fixes: 7bc3fa0172a4 ("procfs: allow reading fdinfo with PTRACE_MODE_READ") Cc: stable@vger.kernel.org Cc: Christian Brauner Cc: Christian König Cc: Jann Horn Cc: Kalesh Singh Cc: Hardik Garg Cc: Allen Pais Signed-off-by: Tyler Hicks (Microsoft) Link: https://lore.kernel.org/r/20240501005646.745089-1-code@tyhicks.com Signed-off-by: Christian Brauner Stable-dep-of: 6255da28d4bb ("proc: protect ptrace_may_access() with exec_update_lock (FD links)") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit bfa0466f150419dbedcb8cd7d9af8af7b884a3fe Author: Thomas Weißschuh Date: Fri Jul 17 10:00:13 2026 -0400 proc: use generic setattr() for /proc/$PID/net [ Upstream commit 18e66ae67673f2c8df6f02428798b1355691f2a9 ] All other files in /proc/$PID/ use proc_setattr(). Not using it allows the usage of chmod() on /proc/$PID/net, even on other processes owned by the same user. The same would probably also be true for other attributes to be changed. As this technically represents an ABI change it is not marked for stable so any unlikely regressions are caught during a full release cycle. Fixes: e9720acd728a ("[NET]: Make /proc/net a symlink on /proc/self/net (v3)") Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/lkml/d0d111ef-edae-4760-83fb-36db84278da1@t-8ch.de/ Fixes: b4844fa0bdb4 ("selftests/nolibc: implement a few tests for various syscalls") Tested-by: Zhangjin Wu Signed-off-by: Willy Tarreau Message-Id: <20230624-proc-net-setattr-v1-2-73176812adee@weissschuh.net> Signed-off-by: Christian Brauner Stable-dep-of: 6255da28d4bb ("proc: protect ptrace_may_access() with exec_update_lock (FD links)") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d3caf4298ce1a63dd5e11cf41cf77eebf855dc53 Author: Lukas Wunner Date: Thu Jul 16 15:49:38 2026 -0400 X.509: Fix validation of ASN.1 certificate header [ Upstream commit 3b626ba431c4501512ad07549310685e07fe4706 ] x509_load_certificate_list() seeks to enforce that a certificate starts with 0x30 0x82 (ASN.1 SEQUENCE tag followed by a length of more than 256 and less than 65535 bytes). But it only enforces that *either* of those two byte values are present, instead of checking for the *conjunction* of the two values. Fix it. Fixes: 631cc66eb9ea ("MODSIGN: Provide module signing public keys to the kernel") Reported-by: Sashiko Closes: https://lore.kernel.org/r/20260508033917.B5873C2BCB0@smtp.kernel.org/ Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v3.7+ Reviewed-by: Ignat Korchagin Reviewed-by: Alistair Francis Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 22d38cf75b556c20b039743bdf3654d535b858be Author: Namjae Jeon Date: Thu Jul 16 14:22:05 2026 -0400 ksmbd: track the connection owning a byte-range lock [ Upstream commit c1016dd1d8b2bcd1158bbaabe94a31bb7e7431fb ] SMB2_LOCK adds each granted byte-range lock to both the file lock list and the lock list of the connection which handled the request. The final close and durable handle paths, however, remove the connection list entry while holding fp->conn->llist_lock. With SMB3 multichannel, the connection handling the LOCK request can be different from the connection which opened the file. The entry can therefore be removed under a different spinlock from the one protecting the list it belongs to. A concurrent traversal can then access freed struct ksmbd_lock and struct file_lock objects. Record the connection owning each lock's clist entry and hold a reference to it while the entry is linked. Use that connection and its llist_lock for unlock, rollback, close, and durable preserve. Durable reconnect assigns the new connection as the owner when publishing the locks again. Fixes: f5a544e3bab7 ("ksmbd: add support for SMB3 multichannel") Cc: stable@vger.kernel.org Reported-by: Musaab Khan Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1ecf3dab1fff0ea2a088f79e713faf9d4abd5b86 Author: DaeMyung Kang Date: Thu Jul 16 14:22:04 2026 -0400 ksmbd: centralize ksmbd_conn final release to plug transport leak [ Upstream commit b1f1e80620deb49daf63c2e677046599b693dc1f ] ksmbd_conn_free() is one of four sites that can observe the last refcount drop of a struct ksmbd_conn. The other three fs/smb/server/connection.c ksmbd_conn_r_count_dec() fs/smb/server/oplock.c __free_opinfo() fs/smb/server/vfs_cache.c session_fd_check() end the conn with a bare kfree(), skipping ida_destroy(&conn->async_ida) and conn->transport->ops->free_transport(conn->transport). Whenever one of them is the last putter, the embedded async_ida and the entire transport struct leak -- for TCP, that is also the struct socket and the kvec iov. __free_opinfo() being a final putter is not theoretical. opinfo_put() queues the callback via call_rcu(&opinfo->rcu, free_opinfo_rcu), so ksmbd_server_terminate_conn() can deposit N opinfo releases in RCU and have ksmbd_conn_free() run in the handler thread before any of them fire. ksmbd_conn_free() then observes refcnt > 0 and short-circuits; the last RCU-delivered __free_opinfo() falls onto its bare kfree(conn) branch and the transport is lost. A/B validation in a QEMU/virtme guest, mounting //127.0.0.1/testshare: each iteration holds 8 files open via sleep processes, force-closes TCP with "ss -K sport = :445", kills the holders, lazy-umounts; repeated 10 times, then ksmbd shutdown and kmemleak scan. state conn_alloc conn_free tcp_free opi_rcu kmemleak ---------- ---------- --------- -------- ------- -------- pre-patch 20 20 10 160 7 with patch 20 20 20 160 0 Pre-patch conn_free=20 with tcp_free=10 directly demonstrates the bare-kfree paths skipping transport cleanup; kmemleak backtraces point into struct tcp_transport / iov. With this patch tcp_free matches conn_free at 20/20 and kmemleak is clean. Move the per-struct final release into __ksmbd_conn_release_work() and route the three bare-kfree final-put sites through a new ksmbd_conn_put(). Those sites now pair ida_destroy() and free_transport() with kfree(conn) regardless of which holder happens to release the last reference. stop_sessions() only triggers the transport shutdown and does not itself drop the last conn reference, so it is unaffected. The centralized release reaches sock_release() -> tcp_close() -> lock_sock_nested() (might_sleep) from every final putter, including __free_opinfo() invoked from an RCU softirq callback, which trips CONFIG_DEBUG_ATOMIC_SLEEP. Defer the release to a dedicated ksmbd_conn_wq workqueue so ksmbd_conn_put() is safe from any non-sleeping context. Make ksmbd_file own a strong connection reference while fp->conn is non-NULL so durable-preserve and final-close paths cannot dereference a stale connection. ksmbd_open_fd() and ksmbd_reopen_durable_fd() take the reference via ksmbd_conn_get() (the latter also reorders the fp->conn / fp->tcon assignments before __open_id() so the published fp is never observed with fp->conn == NULL); session_fd_check() and __ksmbd_close_fd() drop it via ksmbd_conn_put(). With that invariant, session_fd_check() can take a local conn pointer once and use it across the m_op_list and lock_list iterations even though op->conn puts may otherwise drop the last reference. At module exit the workqueue is flushed and destroyed after rcu_barrier(), so any release queued by a trailing RCU callback is drained before the inode hash and module text go away. Fixes: ee426bfb9d09 ("ksmbd: add refcnt to ksmbd_conn struct") Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Stable-dep-of: c1016dd1d8b2 ("ksmbd: track the connection owning a byte-range lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit acf635e7995ed1973bb52a390ebb691d9b54e791 Author: DaeMyung Kang Date: Thu Jul 16 14:22:03 2026 -0400 ksmbd: destroy async_ida in ksmbd_conn_free() [ Upstream commit b32c8db48212a34998c36d0bbc05b29d5c407ef5 ] When per-connection async_ida was converted from a dynamically allocated ksmbd_ida to an embedded struct ida, ksmbd_ida_free() was removed from the connection teardown path but no matching ida_destroy() was added. The connection is therefore freed with the IDA's backing xarray still intact. The kernel IDA API expects ida_init() and ida_destroy() to be paired over an object's lifetime, so add the missing cleanup before the connection is freed. No leak has been observed in testing; this is a pairing fix to match the IDA lifetime rules, not a response to a reproduced regression. Fixes: d40012a83f87 ("cifsd: declare ida statically") Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Stable-dep-of: c1016dd1d8b2 ("ksmbd: track the connection owning a byte-range lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ae9cdb29efed20ffdee9ff3b0bb72fb369c353da Author: Greg Kroah-Hartman Date: Thu Jul 16 14:22:02 2026 -0400 ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc [ Upstream commit ad0057fb91218914d6c98268718ceb9d59b388e1 ] The kernel ASN.1 BER decoder calls action callbacks incrementally as it walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken [2] OCTET STRING element, ksmbd_neg_token_alloc() allocates conn->mechToken immediately via kmemdup_nul(). If a later element in the same blob is malformed, then the decoder will return nonzero after the allocation is already live. This could happen if mechListMIC [3] overrunse the enclosing SEQUENCE. decode_negotiation_token() then sets conn->use_spnego = false because both the negTokenInit and negTokenTarg grammars failed. The cleanup at the bottom of smb2_sess_setup() is gated on use_spnego: if (conn->use_spnego && conn->mechToken) { kfree(conn->mechToken); conn->mechToken = NULL; } so the kfree is skipped, causing the mechToken to never be freed. This codepath is reachable pre-authentication, so untrusted clients can cause slow memory leaks on a server without even being properly authenticated. Fix this up by not checking check for use_spnego, as it's not required, so the memory will always be properly freed. At the same time, always free the memory in ksmbd_conn_free() incase some other failure path forgot to free it. Cc: Namjae Jeon Cc: Steve French Cc: Sergey Senozhatsky Cc: Tom Talpey Cc: linux-cifs@vger.kernel.org Cc: Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Acked-by: Namjae Jeon Signed-off-by: Steve French Stable-dep-of: c1016dd1d8b2 ("ksmbd: track the connection owning a byte-range lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0cfb57297a26ed55e6c7c8e4490065276accc2f0 Author: Namjae Jeon Date: Thu Jul 16 14:22:01 2026 -0400 ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger [ Upstream commit 235e32320a470fcd3998fb3774f2290a0eb302a1 ] When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd(). Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Co-developed-by: munan Huang Signed-off-by: munan Huang Reviewed-by: ChenXiaoSong Signed-off-by: Namjae Jeon Signed-off-by: Steve French Stable-dep-of: c1016dd1d8b2 ("ksmbd: track the connection owning a byte-range lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4213c1208978483021d7d125c131de3985d38f61 Author: Zihan Xi Date: Thu Jul 16 12:04:23 2026 -0400 smb: client: harden POSIX SID length parsing [ Upstream commit 7ad2bcf2441430bb2e918fb3ef9a90d775a6e422 ] posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely. Fixes: 349e13ad30b4 ("cifs: add smb2 POSIX info level") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Assisted-by: Codex:gpt-5.4 Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fa1beca4c0e0890c8c6a900b8022db667239ebe0 Author: Zihan Xi Date: Thu Jul 16 12:04:19 2026 -0400 smb: client: use unaligned reads in parse_posix_ctxt() [ Upstream commit b86467cd2691192ad4809a5a6e922fc24b8e9839 ] The server controls create-context DataOffset, so the POSIX context data pointer may be misaligned on strict-alignment architectures. Use get_unaligned_le32() when reading nlink, reparse_tag, and mode. Fixes: 69dda3059e7a ("cifs: add SMB2_open() arg to return POSIX data") Cc: stable@vger.kernel.org Signed-off-by: Zihan Xi Signed-off-by: Ren Wei Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ee2216dbdf0c677e89bb43e03247dba590ed00ef Author: Norbert Manthey Date: Thu Jul 16 12:04:14 2026 -0400 smb: client: mask server-provided mode to 07777 in modefromsid [ Upstream commit e3d9c7160d483fc8f9e225aafad8ecbbc43f3151 ] When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path. Fixes: e2f8fbfb8d09c ("cifs: get mode bits from special sid on stat") Signed-off-by: Norbert Manthey Assisted-by: Kiro:claude-opus-4.6 Cc: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 34ed271d558523bb54f5a95d863e14147d0c2533 Author: Michael Bommarito Date: Thu Jul 16 11:36:44 2026 -0400 smb: client: resolve SWN tcon from live registrations cifs_swn_notify() looks up a witness registration by id under cifs_swnreg_idr_mutex, drops the mutex, and then uses the registration's cached tcon pointer. That pointer is not a lifetime reference, and it is not a stable representative once cifs_get_swn_reg() lets multiple tcons for the same net/share name share one registration id. A same-share second mount can keep the cifs_swn_reg alive after the first tcon unregisters and is freed. The registration then still points at the freed first tcon, so taking tc_lock or incrementing tc_count through swnreg->tcon only moves the use-after-free earlier. Taking tc_lock while holding cifs_swnreg_idr_mutex also violates the documented CIFS lock order. Fix this by making the registration store only the stable witness identity: id, net name, share name, and notify flags. When a notify arrives, copy that identity under cifs_swnreg_idr_mutex, drop the mutex, then find and pin a live witness tcon that currently matches the net/share pair under the normal cifs_tcp_ses_lock -> tc_lock order. The notification path uses that pinned tcon directly and drops the reference when done. Registration and unregister messages now use the live tcon passed by the caller instead of a cached tcon in the registration. The final unregister send is folded into cifs_swn_unregister() while the registration is still protected by cifs_swnreg_idr_mutex. This removes the previous find/drop/reacquire raw-pointer window. The release path only removes the idr entry and frees the stable identity strings. This preserves the intended one-registration/many-tcon behavior: a registration id represents a net/share pair, and notify handling acts on a live representative selected at use time. It also preserves CLIENT_MOVE ordering for the representative tcon because the old-IP unregister is sent before cifs_swn_register() sends the new-IP register. Fixes: fed979a7e082 ("cifs: Set witness notification handler for messages from userspace daemon") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Steve French (cherry picked from commit ec457f9afe5ae9538bdcd58fd4cb442b9787e183) [ sashal: 5.15 adaptations: cifs_swn_resource_state_changed() keeps the per-channel GlobalMid_Lock tcpStatus reconnect loop (5.15 lacks cifs_signal_cifsd_for_reconnect(), v5.17), switched from swnreg->tcon to the tcon argument; cifs_swn_get_tcon() drops the tc_lock pair and checks tcon->tidStatus == CifsExiting instead of tcon->status == TID_EXITING -- 5.15 has no tc_lock, tc_count and tidStatus are protected by the already-held cifs_tcp_ses_lock; tcon->tree_name is tcon->treeName in 5.15; trace.h hunks applied to fs/cifs/trace.h (pre fs/smb/client move) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 314c1acd73f3c1803972485e7aeec2652588bc3b Author: David Howells Date: Thu Jul 16 11:36:43 2026 -0400 cifs: Add tracing for the cifs_tcon struct refcounting [ Upstream commit afc23febd51c7e24361e3a9c09f3e892eb0a41ea ] Add tracing for the refcounting/lifecycle of the cifs_tcon struct, marking different events with different labels and giving each tcon its own debug ID so that the tracelines corresponding to individual tcons can be distinguished. This can be enabled with: echo 1 >/sys/kernel/debug/tracing/events/cifs/smb3_tcon_ref/enable Signed-off-by: David Howells Acked-by: Paulo Alcantara (Red Hat) cc: Shyam Prasad N cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French Stable-dep-of: ec457f9afe5a ("smb: client: resolve SWN tcon from live registrations") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 68fc0b6cc03ca58060c0f36454e169f5fe258974 Author: Haoxiang Li Date: Thu Jul 16 07:20:48 2026 -0400 smb: client: Fix next buffer leak in receive_encrypted_standard() [ Upstream commit 1c6267a1d5cf4c73b656f8181b310cbbb3e4767b ] receive_encrypted_standard() allocates next_buffer before checking whether the number of compound PDUs already reached MAX_COMPOUND. If the limit check fails, the function returns immediately and the newly allocated next_buffer is not assigned to server->smallbuf/server->bigbuf, making it leaked. Move the MAX_COMPOUND check before allocating next_buffer. Fixes: b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9901f847a762a5d953871dd95767ce2aed3d684d Author: Runyu Xiao Date: Wed Jul 15 20:04:13 2026 -0400 Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock [ Upstream commit 2641a9e0a1dd4af2e21995470a21d55dd35e5203 ] l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for pending_rx_work. process_pending_rx() takes the same mutex, so teardown can deadlock against the worker it is flushing. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the l2cap_conn_ready() -> queue_work(..., &conn->pending_rx_work) submit path, the l2cap_conn_del() -> cancel_work_sync(&conn->pending_rx_work) teardown path, and the process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep reported: WARNING: possible circular locking dependency detected process_pending_rx+0x21/0x2a [vuln_msv] l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv] *** DEADLOCK *** Cancel pending_rx_work before taking conn->lock, matching the existing lock-before-drain ordering used for the two delayed works in the same teardown path. The pending_rx queue is still purged after the work has been cancelled and conn->lock has been acquired. Fixes: 7ab56c3a6ecc ("Bluetooth: Fix deadlock in l2cap_conn_del()") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8a300067d94a81b75a7ad87dad6de027ae859a82 Author: Hyunwoo Kim Date: Wed Jul 15 20:04:12 2026 -0400 Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() [ Upstream commit 00fdebbbc557a2fc21321ff2eaa22fd70c078608 ] l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del(). Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del") Signed-off-by: Hyunwoo Kim Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2641a9e0a1dd ("Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 84bc3197f7d87c5b89c156e853d0561a9154eceb Author: Luiz Augusto von Dentz Date: Wed Jul 15 20:04:11 2026 -0400 Bluetooth: L2CAP: Fix not tracking outstanding TX ident [ Upstream commit 6c3ea155e5ee3e56606233acde8309afda66d483 ] This attempts to proper track outstanding request by using struct ida and allocating from it in l2cap_get_ident using ida_alloc_range which would reuse ids as they are free, then upon completion release the id using ida_free. This fixes the qualification test case L2CAP/COS/CED/BI-29-C which attempts to check if the host stack is able to work after 256 attempts to connect which requires Ident field to use the full range of possible values in order to pass the test. Link: https://github.com/bluez/bluez/issues/1829 Signed-off-by: Luiz Augusto von Dentz Reviewed-by: Paul Menzel Stable-dep-of: 2641a9e0a1dd ("Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 42bef500d07b5769d916e9122a3e3fa3fd2245ef Author: Florian Westphal Date: Wed Jul 15 17:26:46 2026 -0400 netfilter: ebtables: zero chainstack array [ Upstream commit cbfe53599eebffd188938ab6774cc41794f6f9d5 ] sashiko reports: looking at ebtables table translation, could a sparse cpu_possible_mask lead to an uninitialized pointer free? If cpu_possible_mask is sparse (for example, CPU 0 and CPU 2 are possible, but CPU 1 is not), the allocation loop skips CPU 1. If vmalloc_node() fails at CPU 2, the cleanup loop will blindly decrement and call vfree() on newinfo->chainstack[1]. Not a real-world bug, such allocation isn't expected to fail in the first place. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 627faeac83df309f7dd2392c7d2ffedc2b423be1 Author: Qianfeng Rong Date: Wed Jul 15 17:26:45 2026 -0400 netfilter: ebtables: Use vmalloc_array() to improve code [ Upstream commit 46015e6b3ea75297b28d4806564f3f692cf11861 ] Remove array_size() calls and replace vmalloc() with vmalloc_array() to simplify the code. vmalloc_array() is also optimized better, uses fewer instructions, and handles overflow more concisely[1]. [1]: https://lore.kernel.org/lkml/abc66ec5-85a4-47e1-9759-2f60ab111971@vivo.com/ Signed-off-by: Qianfeng Rong Signed-off-by: Florian Westphal Stable-dep-of: cbfe53599eeb ("netfilter: ebtables: zero chainstack array") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3b1aa05ec27eeccc889ecaa3f2d9baa9f453e50d Author: Runyu Xiao Date: Wed Jul 15 13:55:24 2026 -0400 gpio: sch: use raw_spinlock_t in the irq startup path [ Upstream commit 286533cb14a3c8a8bd39ff64ea2fc8e1aa0f638b ] sch_irq_unmask() enables the GPIO IRQ and then updates the controller state through sch_irq_mask_unmask(), which takes sch->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the SCH controller lock to raw_spinlock_t. The same lock is also used by the GPIO direction and value callbacks, but those critical sections only update MMIO-backed GPIO registers and do not contain sleepable operations. Keeping this register lock non-sleeping is therefore appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. Fixes: 7a81638485c1 ("gpio: sch: Add edge event support") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Reviewed-by: Sebastian Andrzej Siewior Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260617154035.1199948-2-runyu.xiao@seu.edu.cn Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 97fafde593bc2761b4a40954a7650df56ec41217 Author: Bartosz Golaszewski Date: Wed Jul 15 13:55:23 2026 -0400 gpio: sch: use new GPIO line value setter callbacks [ Upstream commit 883c7eb2c4a9e143b2662ba754f9c16fb31adced ] struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Acked-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-3-bc110a3b52ff@linaro.org Signed-off-by: Bartosz Golaszewski Stable-dep-of: 286533cb14a3 ("gpio: sch: use raw_spinlock_t in the irq startup path") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fa494f379c529de36ee8097dccb924b25c5a919d Author: Runyu Xiao Date: Wed Jul 15 12:44:18 2026 -0400 coresight: etb10: restore atomic_t for shared reading state [ Upstream commit fa09f08ede3db3050ae16ae1ed92c902d0cada23 ] The etb10 miscdevice uses drvdata->reading as a shared exclusivity gate for userspace buffer access. etb_open() claims that gate with local_cmpxchg(), and etb_release() clears it with local_set(). That gate is shared per-device state rather than CPU-local state. A running system can reach it whenever /dev/ is opened, closed, and reopened by different tasks while the device remains registered, so the same drvdata->reading variable may be claimed on one CPU and later cleared on another. This code used to use atomic_t for the same gate, but commit 27b10da8fff2 ("coresight: etb10: moving to local atomic operations") changed it to local_t even though the access pattern remained cross-task and cross-CPU. Restore atomic_t together with atomic_cmpxchg() and atomic_set() so the exclusivity gate again uses a primitive intended for shared state. The issue was found on Linux v6.18.21 by our static analysis tool while scanning surviving local_t-on-shared-state sites, and then manually reviewed against the live etb10 file-op path. It was runtime-validated with a reproducible QEMU no-device KCSAN PoC that kept the same report-local contract: 1. use one shared struct etb_drvdata carrier and its drvdata->reading gate; 2. call etb_open() and etb_release() sequentially on that gate to confirm the original claim/clear path; 3. bind the open side to CPU0 and the release side to CPU1 for the same gate to show cross-CPU ownership; 4. run bound workers that repeatedly race etb_open() and etb_release() on the same gate until KCSAN reports a target hit. The harness recorded: L1 passed open=1 release=1 reading_after_open=1 reading_after_release=0 L2 passed open_cpu=0 release_cpu=1 cross_cpu_release=1 reading_after=0 open_ret=0 Representative KCSAN excerpt from the no-device validation run: BUG: KCSAN: data-race in etb_open.constprop.0.isra.0 [vuln_msv] write to 0xffffffffc0003810 of 4 bytes by task 216 on cpu 1: etb_open.constprop.0.isra.0+0x38/0x80 [vuln_msv] l3_worker_thread_fn+0x4f/0xf0 [vuln_msv] kthread+0x17e/0x1c0 ret_from_fork+0x22/0x30 read to 0xffffffffc0003810 of 4 bytes by task 215 on cpu 0: etb_open.constprop.0.isra.0+0x18/0x80 [vuln_msv] l3_worker_thread_fn+0x4f/0xf0 [vuln_msv] kthread+0x17e/0x1c0 ret_from_fork+0x22/0x30 value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 215 Comm: etb10_l3_a Tainted: G O 6.1.66 #2 This no-device harness is not a real ETB10 hardware end-to-end run, but it preserves the same shared drvdata->reading gate and the same etb_open()/etb_release() claim/clear contract. No real ETB10 hardware was available for runtime testing. Build-tested with: make olddefconfig make -j"$(nproc)" drivers/hwtracing/coresight/coresight-etb10.o Fixes: 27b10da8fff2 ("coresight: etb10: moving to local atomic operations") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20260528165201.319452-1-runyu.xiao@seu.edu.cn Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fec61d0841810f6914e88dcebefad88aefc47bdf Author: Marco Nenciarini Date: Wed Jul 15 07:16:18 2026 -0400 PCI: Skip Resizable BAR restore on read error [ Upstream commit ee7471fe968d210939be9046089a924cd23c8c3b ] pci_restore_rebar_state() uses the Resizable BAR Control register to decide how many BARs to restore (nbars) and which BAR each iteration addresses (bar_idx). When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7, past the spec's valid ranges for both fields. pci_resource_n() then returns an unrelated resource slot, whose size is used to derive a nonsensical value written back to the Resizable BAR Control register. Bail out if any Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. Fixes: d3252ace0bc6 ("PCI: Restore resized BAR state on resume") Signed-off-by: Marco Nenciarini Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Link: https://patch.msgid.link/666cac19b5daa0ab0e0ab64454e76b4d24465dbd.1776429882.git.mnencia@kcore.it Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d92250b5fdf04582760d7dc9dd257fdae1a3c1f6 Author: Ilpo Järvinen Date: Wed Jul 15 07:16:17 2026 -0400 PCI: Move Resizable BAR code to rebar.c [ Upstream commit 9f71938cd77f32a448f40a288e409eca60e55486 ] For lack of a better place to put it, Resizable BAR code has been placed inside pci.c and setup-res.c that do not use it for anything. Upcoming changes are going to add more Resizable BAR related functions, increasing the code size. As pci.c is huge as is, move the Resizable BAR related code and the BAR resize code from setup-res.c to rebar.c. Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Reviewed-by: Christian König Link: https://patch.msgid.link/20251113180053.27944-2-ilpo.jarvinen@linux.intel.com Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 48200bbfbfdf35ac372b1724222866c04f77890e Author: Ilpo Järvinen Date: Wed Jul 15 07:16:16 2026 -0400 PCI: Add kerneldoc for pci_resize_resource() [ Upstream commit d787018e2dfdc4c1331538e7a8717690d1b7c9b3 ] As pci_resize_resource() is meant to be used also outside of PCI core, document the interface with kerneldoc. Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Alex Bennée # AVA, AMD GPU Link: https://patch.msgid.link/20251113162628.5946-8-ilpo.jarvinen@linux.intel.com Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2feea9a7e038b659d2e9d429224866b375ce329d Author: Ilpo Järvinen Date: Wed Jul 15 07:16:15 2026 -0400 PCI: Fix restoring BARs on BAR resize rollback path [ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ] BAR resize operation is implemented in the pci_resize_resource() and pbus_reassign_bridge_resources() functions. pci_resize_resource() can be called either from __resource_resize_store() from sysfs or directly by the driver for the Endpoint Device. The pci_resize_resource() requires that caller has released the device resources that share the bridge window with the BAR to be resized as otherwise the bridge window is pinned in place and cannot be changed. pbus_reassign_bridge_resources() rolls back resources if the resize operation fails, but rollback is performed only for the bridge windows. Because releasing the device resources are done by the caller of the BAR resize interface, these functions performing the BAR resize do not have access to the device resources as they were before the resize. pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources() after rolling back the bridge windows as they were, however, it will not guarantee the resource are assigned due to differences in how FW and the kernel assign the resources (alignment of the start address and tail). To perform rollback robustly, the BAR resize interface has to be altered to also release the device resources that share the bridge window with the BAR to be resized. Also, remove restoring from the entries failed list as saved list should now contain both the bridge windows and device resources so the extra restore is duplicated work. Some drivers (currently only amdgpu) want to prevent releasing some resources. Add exclude_bars param to pci_resize_resource() and make amdgpu pass its register BAR (BAR 2 or 5), which should never be released during resize operation. Normally 64-bit prefetchable resources do not share a bridge window with the 32-bit only register BAR, but there are various fallbacks in the resource assignment logic which may make the resources share the bridge window in rare cases. This change (together with the driver side changes) is to counter the resource releases that had to be done to prevent resource tree corruption in the ("PCI: Release assigned resource before restoring them") change. As such, it likely restores functionality in cases where device resources were released to avoid resource tree conflicts which appeared to be "working" when such conflicts were not correctly detected by the kernel. Reported-by: Simon Richter Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/ Reported-by: Alex Bennée Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/ Signed-off-by: Ilpo Järvinen [bhelgaas: squash amdgpu BAR selection from https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com] Signed-off-by: Bjorn Helgaas Tested-by: Alex Bennée # AVA, AMD GPU Reviewed-by: Christian König Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 094652b5f0335c183e3ec5221f78ee64bc04a49d Author: Ilpo Järvinen Date: Wed Jul 15 07:16:14 2026 -0400 PCI: Free saved list without holding pci_bus_sem [ Upstream commit 1d8a0506f69895b7cfd9d5c4546761c508231a8a ] Freeing the saved list does not require holding pci_bus_sem, so the critical section can be made shorter. Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Alex Bennée # AVA, AMD GPU Link: https://patch.msgid.link/20251113162628.5946-6-ilpo.jarvinen@linux.intel.com Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a8c332dbc68c1a8e6192991200022c82b38b3709 Author: Ilpo Järvinen Date: Wed Jul 15 07:16:13 2026 -0400 PCI: Prevent resource tree corruption when BAR resize fails [ Upstream commit 91c4c89db41499eea1b29c56655f79c3bae66e93 ] pbus_reassign_bridge_resources() saves bridge windows into the saved list before attempting to adjust resource assignments to perform a BAR resize operation. If resource adjustments cannot be completed fully, rollback is attempted by restoring the resource from the saved list. The rollback, however, does not check whether the resources it restores were assigned by the partial resize attempt. If restore changes addresses of the resource, it can result in corrupting the resource tree. An example of a corrupted resource tree with overlapping addresses: 6200000000000-6203fbfffffff : pciex@620c3c0000000 6200000000000-6203fbff0ffff : PCI Bus 0030:01 6200020000000-62000207fffff : 0030:01:00.0 6200000000000-6203fbff0ffff : PCI Bus 0030:02 A resource that are assigned into the resource tree must remain unchanged. Thus, release such a resource before attempting to restore and claim it back. For simplicity, always do the release and claim back for the resource even in the cases where it is restored to the same address range. Note: this fix may "break" some cases where devices "worked" because the resource tree corruption allowed address space double counting to fit more resource than what can now be assigned without double counting. The upcoming changes to BAR resizing should address those scenarios (to the extent possible). Fixes: 8bb705e3e79d ("PCI: Add pci_resize_resource() for resizing BARs") Reported-by: Simon Richter Link: https://lore.kernel.org/linux-pci/67840a16-99b4-4d8c-9b5c-4721ab0970a2@hogyros.de/ Reported-by: Alex Bennée Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/ Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Alex Bennée # AVA, AMD GPU Link: https://patch.msgid.link/20251113162628.5946-2-ilpo.jarvinen@linux.intel.com Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 446b4d77599cf1a168573f7fb32a4a6aa4f09219 Author: Giovanni Cabiddu Date: Tue Jul 14 23:16:01 2026 -0400 crypto: qat - fix VF2PF work teardown race in adf_disable_sriov() [ Upstream commit 277281c10c63791067d24d421f7c43a15faa9096 ] The VF2PF interrupt handler queues PF-side response work that stores a raw pointer to per-VF state (struct adf_accel_vf_info). Currently, adf_disable_sriov() destroys per-VF mutexes and frees vf_info without stopping new VF2PF work or waiting for in-flight workers to complete. A concurrently scheduled or already queued worker can then dereference freed memory. This manifests as a use-after-free when KASAN is enabled: BUG: KASAN: null-ptr-deref in mutex_lock+0x76/0xe0 Write of size 8 at addr 0000000000000260 by task kworker/24:2/... Workqueue: qat_pf2vf_resp_wq adf_iov_send_resp [intel_qat] Call Trace: kasan_report+0x119/0x140 mutex_lock+0x76/0xe0 adf_gen4_pfvf_send+0xd4/0x1f0 [intel_qat] adf_recv_and_handle_vf2pf_msg+0x290/0x360 [intel_qat] adf_iov_send_resp+0x8c/0xe0 [intel_qat] process_one_work+0x6ac/0xfd0 worker_thread+0x4dd/0xd30 kthread+0x326/0x410 ret_from_fork+0x33b/0x670 Add a PF-local flag, vf2pf_disabled, that gates work queueing, worker processing, and interrupt re-enabling during teardown. Set this flag atomically with the hardware interrupt mask inside adf_disable_all_vf2pf_interrupts(). After masking, synchronize the AE cluster MSI-X interrupt and flush the PF response workqueue before tearing down per-VF locks and state so all in-flight work completes before vf_info is destroyed. Introduce adf_enable_all_vf2pf_interrupts() to clear the flag and unmask all VF2PF interrupts under the same lock when SR-IOV is re-enabled. This ensures the software flag and hardware state transition atomically on both the enable and disable paths. Cc: stable@vger.kernel.org Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV") Signed-off-by: Giovanni Cabiddu Reviewed-by: Ahsan Atta Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit efa27d487abcdec79669a60a6d94d5d6eceb7c1d Author: Alexandru Hossu Date: Tue Jul 14 21:34:08 2026 -0400 staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr() [ Upstream commit 1463ca3ec6601cbb097d8d87dbf5dcf1cb86a344 ] Three IE/attribute parsing functions have missing bounds checks. rtw_get_sec_ie() and rtw_get_wapi_ie() iterate over a raw IE buffer without verifying that the header bytes (tag + length) are within the remaining buffer before reading them. Additionally, rtw_get_sec_ie() compares the 4-byte WPA OUI at cnt+2 without checking that at least 6 bytes remain, and rtw_get_wapi_ie() compares a 4-byte WAPI OUI at cnt+6 without checking that at least 10 bytes remain. rtw_get_wps_attr() reads wps_ie[0] and wps_ie+2 unconditionally at entry, before verifying that wps_ielen is large enough to contain the 6-byte WPS IE header (element_id + length + 4-byte OUI). Inside the attribute loop, get_unaligned_be16() is called on attr_ptr and attr_ptr+2 without checking that 4 bytes remain in the buffer. Add a cnt+2 bounds check before each loop body in rtw_get_sec_ie() and rtw_get_wapi_ie(), guard each multi-byte comparison with a minimum IE length requirement, add a wps_ielen < 6 early return in rtw_get_wps_attr(), and add a 4-byte bounds check in its inner loop. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-8-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9bb4be00ec0fd70133f3b9648d415cc84bb56ac9 Author: Nikolay Kulikov Date: Tue Jul 14 21:34:07 2026 -0400 staging: rtl8723bs: fix spaces around binary operators [ Upstream commit 0c9d1b56f9af0762a5be5118e1bb962f23784dc4 ] Add missing spaces and fix line length to comply with kernel coding style. Signed-off-by: Nikolay Kulikov Reviewed-by: Ethan Tidmore Link: https://patch.msgid.link/20260221172751.52329-1-nikolayof23@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1463ca3ec660 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4b5a1f11e184587279515ed432e897786ffeefcd Author: William Hansen-Baird Date: Tue Jul 14 21:34:06 2026 -0400 staging: rtl8723bs: core: move constants to right side in comparison [ Upstream commit cf0f2680c30d4b438a5e84b73dc70be405936b54 ] Move constants to right side in if-statement conditions. Signed-off-by: William Hansen-Baird Link: https://patch.msgid.link/20251224100329.762141-3-william.hansen.baird@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1463ca3ec660 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8cd3adfaa0e05a01ef43f348043226d990c7420e Author: Sevinj Aghayeva Date: Tue Jul 14 21:34:05 2026 -0400 staging: rtl8723bs: remove redundant braces in if statements [ Upstream commit 94579b02720bb63096312c4bc7694fd2f6df7cbb ] Adhere to Linux kernel coding style. Reported by checkpatch: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Sevinj Aghayeva Link: https://lore.kernel.org/r/20220331113245.GA425141@euclid Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1463ca3ec660 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c24a4e469049a50c2fac41a5ae13c238311aee3c Author: Sevinj Aghayeva Date: Tue Jul 14 21:34:04 2026 -0400 staging: rtl8723bs: Remove redundant else branches. [ Upstream commit 4610e57a7d2edeef14aa852cd945f9920e1759da ] This patch fixes the following checkpatch.pl warning: WARNING: else is not generally useful after a break or return Signed-off-by: Sevinj Aghayeva Link: https://lore.kernel.org/r/20220329140904.GA3566@ubuntu Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 1463ca3ec660 ("staging: rtl8723bs: fix OOB reads in rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ec7c05eed47d8b15c45380aee7ca168a82e15035 Author: Manivannan Sadhasivam Date: Tue Jul 14 20:17:49 2026 -0400 PCI: mediatek: Fix IRQ domain leak when port fails to enable [ Upstream commit f865a57896bd92d7662eb2818d8f48872e2cbbc7 ] When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port from pcie->ports and frees the port structure. However, the IRQ domains set up earlier by mtk_pcie_init_irq_domain() are never freed. Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper, mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in the probe error path (during resume, child devices may have active MSI mappings and the NOIRQ context prohibits sleeping locks), mtk_pcie_enable_port() is changed to return an error code so callers can distinguish the two paths and act accordingly. This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC support series. Fixes: b099631df160 ("PCI: mediatek: Add controller support for MT2712 and MT7622") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Cc: stable@vger.kernel.org # 5.10 Cc: Caleb James DeLisle Link: https://patch.msgid.link/20260521174617.17692-1-mani@kernel.org Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1bfa2061dfda0594187552790f60994b296c3f33 Author: Christian Marangi Date: Tue Jul 14 20:17:48 2026 -0400 PCI: mediatek: Convert bool to single quirks entry and bitmap [ Upstream commit 04305367fab7ec9c98eeba315ad09c8b20abce93 ] To clean Mediatek SoC PCIe struct, convert all the bool to a bitmap and use a single quirks to reference all the values. This permits cleaner addition of new quirk without having to define a new bool in the struct. Signed-off-by: Christian Marangi Signed-off-by: Manivannan Sadhasivam Reviewed-by: AngeloGioacchino Del Regno Link: https://patch.msgid.link/20251020111121.31779-4-ansuelsmth@gmail.com Stable-dep-of: f865a57896bd ("PCI: mediatek: Fix IRQ domain leak when port fails to enable") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 95202d1793ccd6d7c890c6d73f68f23122861d9e Author: Jiri Slaby (SUSE) Date: Tue Jul 14 20:17:47 2026 -0400 PCI: controller: Use dev_fwnode() instead of of_fwnode_handle() [ Upstream commit a103d2dede5683dabbac2c3374bc24b6a9434478 ] All irq_domain functions now accept fwnode instead of of_node. But many PCI controllers still extract dev to of_node and then of_node to fwnode. Instead, clean this up and simply use the dev_fwnode() helper to extract fwnode directly from dev. Internally, it still does dev => of_node => fwnode steps, but it's now hidden from the users. In the case of altera, this also removes an unused 'node' variable that is only used when CONFIG_OF is enabled: drivers/pci/controller/pcie-altera.c: In function 'altera_pcie_init_irq_domain': drivers/pci/controller/pcie-altera.c:855:29: error: unused variable 'node' [-Werror=unused-variable] 855 | struct device_node *node = dev->of_node; Signed-off-by: Jiri Slaby (SUSE) Signed-off-by: Arnd Bergmann # altera [bhelgaas: squash together, rebase to precede msi-parent] Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20250521163329.2137973-1-arnd@kernel.org Link: https://patch.msgid.link/20250611104348.192092-16-jirislaby@kernel.org Link: https://patch.msgid.link/20250723065907.1841758-1-jirislaby@kernel.org Stable-dep-of: f865a57896bd ("PCI: mediatek: Fix IRQ domain leak when port fails to enable") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2131621986c62c86109ce4d84cf73a73757eb8a6 Author: Alexandru Hossu Date: Tue Jul 14 18:04:26 2026 -0400 staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie() [ Upstream commit 5a752a616e756844388a1a45404db9fc29fec655 ] supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-4-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8dd0a324433066b206d1962ed852eaaab664c0c1 Author: Franziska Naepelt Date: Tue Jul 14 18:04:25 2026 -0400 staging: rtl8723bs: Fix space issues [ Upstream commit c4b811b9361b0d7ea167a79587f5ec0a13fd8863 ] Fix the following checkpatch space issues: - CHECK: spaces preferred around that '*' (ctx:VxV) - CHECK: spaces preferred around that '+' (ctx:VxV) - CHECK: spaces preferred around that '-' (ctx:VxV) - CHECK: spaces preferred around that '|' (ctx:VxV) - CHECK: No space is necessary after a cast - WARNING: please, no spaces at the start of a line Signed-off-by: Franziska Naepelt Link: https://lore.kernel.org/r/20230701102538.5359-1-franziska.naepelt@googlemail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5a752a616e75 ("staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c0a9d4943413d08ed49626f92d123206d367008a Author: Franziska Naepelt Date: Tue Jul 14 18:04:24 2026 -0400 staging: rtl8723bs: Fix indentation issues [ Upstream commit b59cba2309b16fa364df03e3693b8d45c3fadbd6 ] Fix the following checkpatch indentation issues: - WARNING: suspect code indent for conditional statements (32, 48) - WARNING: suspect code indent for conditional statements (24, 24) - ERROR: code indent should use tabs where possible Signed-off-by: Franziska Naepelt Link: https://lore.kernel.org/r/20230619180351.18925-1-franziska.naepelt@gmail.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5a752a616e75 ("staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit eb47c023a25d9e7a4fe2616ef108289b98e55fa7 Author: Richard Zhu Date: Tue Jul 14 16:02:20 2026 -0400 PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling [ Upstream commit aad953fb4eed0df5486cd54ccad80ac197678e01 ] The IMX6SX_GPR12_PCIE_TEST_POWERDOWN bit does not control the PCIe reference clock on i.MX6SX. Instead, it is part of i.MX6SX PCIe core reset sequence. Move the IMX6SX_GPR12_PCIE_TEST_POWERDOWN assertion/deassertion into the core reset functions to properly reflect its purpose. Remove the .enable_ref_clk() callback for i.MX6SX since it was incorrectly manipulating this bit. Fixes: e3c06cd063d6 ("PCI: imx6: Add initial imx6sx support") Signed-off-by: Richard Zhu Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Frank Li Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260319090844.444987-1-hongxing.zhu@nxp.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b6a381c01e2ac98a48e32ac0f2a45bbadd9e26b0 Author: Shoichiro Miyamoto Date: Tue Jul 14 16:02:15 2026 -0400 smb: client: restrict implied bcc[0] exemption to responses without data area [ Upstream commit 53b7c271f06be4dd5cfc8c6ef552a8355c891a7f ] smb2_check_message() has a long-standing quirk that accepts a response whose calculated length is one byte larger than the bytes actually received ("server can return one byte more due to implied bcc[0]"). This was introduced to accommodate servers that omit the trailing bcc[0] overlap byte when no data area is present. However, the exemption is applied unconditionally, regardless of whether the command actually carries a data area (has_smb2_data_area[]). When a response with a data area is subject to the +1 exemption, the reported data can extend one byte beyond the bytes actually received, yet smb2_check_message() still accepts it. The subsequent decoder then reads past the end of the receive buffer. This is reachable during NEGOTIATE and SESSION_SETUP, before the session is established. The resulting out-of-bounds reads are visible under KASAN when mounting against a non-conforming server; both the SPNEGO/negTokenInit and the NTLMSSP challenge decoders are affected: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x16a7/0x1b00 Read of size 1 at addr ffff8880084d67c0 by task mount.cifs/81 CPU: 1 UID: 0 PID: 81 Comm: mount.cifs Not tainted 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 asn1_ber_decoder+0x16a7/0x1b00 decode_negTokenInit+0x19/0x30 SMB2_negotiate+0x31d9/0x4c90 cifs_negotiate_protocol+0x1f2/0x3f0 cifs_get_smb_ses+0x93f/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 85: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 0 bytes to the right of allocated 448-byte region [ffff8880084d6600, ffff8880084d67c0) which belongs to the cache cifs_small_rq of size 448 BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x36/0x50 Read of size 329 at addr ffff88800726c678 by task mount.cifs/89 CPU: 0 UID: 0 PID: 89 Comm: mount.cifs Tainted: G B 7.1.0-rc6 #1 Call Trace: dump_stack_lvl+0x4e/0x70 print_report+0x157/0x4c9 kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x36/0x50 decode_ntlmssp_challenge+0x457/0x680 SMB2_sess_auth_rawntlmssp_negotiate+0x6f0/0xcb0 SMB2_sess_setup+0x219/0x4f0 cifs_setup_session+0x248/0xaf0 cifs_get_smb_ses+0xf79/0x17e0 cifs_mount_get_session+0x7f/0x3a0 cifs_mount+0xb4/0xcf0 cifs_smb3_do_mount+0x23a/0x1500 smb3_get_tree+0x3b0/0x630 vfs_get_tree+0x82/0x2d0 fc_mount+0x10/0x1b0 path_mount+0x50d/0x1de0 __x64_sys_mount+0x20b/0x270 do_syscall_64+0xee/0x590 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 93: kmem_cache_alloc_noprof+0x106/0x380 mempool_alloc_noprof+0x116/0x1e0 cifs_small_buf_get+0x31/0x80 allocate_buffers+0x10d/0x2b0 cifs_demultiplex_thread+0x1d5/0x1d50 kthread+0x2c6/0x390 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 The buggy address is located 120 bytes inside of allocated 448-byte region [ffff88800726c600, ffff88800726c7c0) which belongs to the cache cifs_small_rq of size 448 Restrict the +1 exemption to responses that have no data area, so that it still covers the bcc[0] omission it was meant for. When a data area is present, the +1 discrepancy instead means the reported data length overruns the received buffer, so the response must be rejected. Fixes: 093b2bdad322 ("CIFS: Make demultiplex_thread work with SMB2 code") Cc: stable@vger.kernel.org Signed-off-by: Shoichiro Miyamoto Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c7020af7817d82cb41ae929d8ae6ffba3ec11b33 Author: Enzo Matsumiya Date: Tue Jul 14 16:02:14 2026 -0400 cifs: remove unused server parameter from calc_smb_size() [ Upstream commit 68ed14496b032b0c9ef21b38ee45c6c8f3a18ff1 ] This parameter is unused by the called function Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Enzo Matsumiya Signed-off-by: Steve French Stable-dep-of: 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 26a04b85c47807b39ee2c4ac212105434654a74f Author: Enzo Matsumiya Date: Tue Jul 14 16:02:13 2026 -0400 smb2: small refactor in smb2_check_message() [ Upstream commit da3847894fddc27ca95d5ac0012f444a77a5e0c3 ] If the command is SMB2_IOCTL, OutputLength and OutputContext are optional and can be zero, so return early and skip calculated length check. Move the mismatched length message to the end of the check, to avoid unnecessary logs when the check was not a real miscalculation. Also change the pr_warn_once() to a pr_warn() so we're sure to get a log for the real mismatches. Signed-off-by: Enzo Matsumiya Signed-off-by: Steve French Stable-dep-of: 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 389e9cb3ef8272dc396577c5455f30652bdd5dc0 Author: Jakob Koschel Date: Tue Jul 14 16:02:12 2026 -0400 cifs: remove check of list iterator against head past the loop body [ Upstream commit 00c796eecba4898194ea549679797ee28f89a92f ] When list_for_each_entry() completes the iteration over the whole list without breaking the loop, the iterator value will be a bogus pointer computed based on the head element. While it is safe to use the pointer to determine if it was computed based on the head element, either with list_entry_is_head() or &pos->member == head, using the iterator variable after the loop should be avoided. In preparation to limit the scope of a list iterator to the list traversal loop, use a dedicated pointer to point to the found element [1]. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Jakob Koschel Signed-off-by: Steve French Stable-dep-of: 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 230cccbb8294166d25e81268da0a2892054d31a0 Author: Ronnie Sahlberg Date: Tue Jul 14 16:02:11 2026 -0400 cifs: Create a new shared file holding smb2 pdu definitions [ Upstream commit 0d35e382e4e96a4fd97a1438bc1b11a91d2d85a6 ] This file will contain all the definitions we need for SMB2 packets and will follow the naming convention of MS-SMB2.PDF as closely as possible to make it easier to cross-reference beween the definitions and the standard. The content of this file will mostly consist of migration of existing definitions in the cifs/smb2.pdu.h and ksmbd/smb2pdu.h files with some additional tweaks as the two files have diverged. This patch introduces the new smbfs_common/smb2pdu.h file and migrates the SMB2 header as well as TREE_CONNECT and TREE_DISCONNECT to the shared file. Signed-off-by: Ronnie Sahlberg Reviewed-by: Namjae Jeon Signed-off-by: Steve French Stable-dep-of: 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9cf0cc481e1645ec65e61486ae41c486c59781cb Author: Mahesh Vaidya Date: Tue Jul 14 12:55:48 2026 -0400 PCI: altera: Fix resource leaks on probe failure [ Upstream commit 7a94138caeb27f3c49c1dbd93bf422098925bb28 ] The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. Fixes: c63aed7334c2 ("PCI: altera: Use pci_host_probe() to register host") Signed-off-by: Mahesh Vaidya [mani: commit log] Signed-off-by: Manivannan Sadhasivam Reviewed-by: Subhransu S. Prusty Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260430204330.3121003-3-mahesh.vaidya@altera.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8d65decde9afd2bd78bcfffdc0df73b82a0b5509 Author: Alex Williamson Date: Tue Jul 14 09:36:03 2026 -0400 vfio/pci: Release the VGA arbiter client on register_device() failure [ Upstream commit daedde7f024ecf88bc8e832ed40cf2c795f0796a ] The re-order in the Fixes commit below displaced vfio_pci_vga_init() as the last failure point of what is now vfio_pci_core_register_device() without introducing an unwind for the VGA arbiter registration. In current kernels this is mostly benign because vfio_pci_set_decode() only uses pci_dev state, but the original failure path could leave a callback with a freed vdev cookie. The stale registration also becomes unsafe again once the callback follows drvdata to the vfio device. Add the required VGA unwind callout. Fixes: 4aeec3984ddc ("vfio/pci: Re-order vfio_pci_probe()") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Alex Williamson Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20260615191241.688297-3-alex.williamson@nvidia.com Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d62624fe256b2d0d13454c78cbfc70ff5d954dc7 Author: Zhao Dongdong Date: Mon Jul 13 22:09:11 2026 -0400 ALSA: aoa: check snd_ctl_new1() return value [ Upstream commit 8df560fefe6fed6a20b7e06720eeaeccec349ac0 ] snd_ctl_new1() can return NULL when memory allocation fails. In layout.c, the function does not check the return value before dereferencing ctl->id.name or passing to aoa_snd_ctl_add(), which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return early if any fails. Assisted-by: Opencode:DeepSeek-V4-Flash Cc: stable@vger.kernel.org Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Zhao Dongdong Link: https://patch.msgid.link/tencent_35F3A25FEEBF190A2E15ED787754C57E3708@qq.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ad767fe7028b525c3a704c74733b4113ba483ef0 Author: Herman van Hazendonk Date: Mon Jul 13 22:09:08 2026 -0400 iio: common: st_sensors: honour channel endianness in read_axis_data [ Upstream commit 55052184ac9011db2ea983e54d6c21f0b1079a12 ] st_sensors_read_axis_data() unconditionally decoded multi-byte results with get_unaligned_le16() / get_unaligned_le24() regardless of the channel's declared scan_type.endianness. For every ST sensor that has used this helper since it was introduced this happened to be fine because the ST IMU/accel/gyro/pressure families publish their data registers as little-endian and the channel specs in those drivers declare IIO_LE accordingly. The LSM303DLH magnetometer however publishes its X/Y/Z output as a pair of big-endian bytes (the H register sits at the lower address, 0x03/0x05/0x07, and the L register immediately after), and its channel specs in st_magn_core.c correctly declare IIO_BE -- but read_axis_data() ignored that and decoded as little-endian, swapping the high and low bytes of every magnetometer sample. The LSM303DLHC and LSM303DLM share the same st_magn_16bit_channels (IIO_BE) and were therefore byte-swapped by the same bug; users of those parts will see different in_magn_*_raw values after this fix lands. The bug is most visible on a stationary chip: in earth's field the true X reading is small and the high byte sits at 0x00, so swapping the bytes pins sysfs X at exactly the low byte's pattern (e.g. 0x00F0 = 240). Y and Z still appear "to vary" because their magnitudes are larger and the noise in the low byte produces big swings in the swapped high byte: before (LSM303DLH flat, sysfs in_magn_*_raw): X=240 (stuck), Y= 12032..23296, Z=-16128..-9728 after (direct i2c-dev big-endian decode, same chip same orientation): X≈-4096, Y≈210, Z≈80 (sensible values reflecting earth's ambient field at low gauss range) Fix read_axis_data() to dispatch on ch->scan_type.endianness and call get_unaligned_be16() / get_unaligned_be24() when the channel declares IIO_BE. Existing IIO_LE consumers (st_accel, st_gyro, st_pressure, st_lsm6dsx and others) are unaffected because their channel specs already declare IIO_LE and the LE path is unchanged. While restructuring the branches, replace the previously implicit silent-success-with-uninitialised-*data fall-through for byte_for_channel outside 1..3 with an explicit return -EINVAL. No in-tree ST sensor publishes such a channel, but the new behaviour is strictly safer than handing userspace garbage. Fixes: 23491b513bcd ("iio:common: Add STMicroelectronics common library") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 sparse smatch clang-analyzer coccinelle checkpatch Assisted-by: Sashiko:claude-opus-4-7 Signed-off-by: Herman van Hazendonk Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d4989777a1141af847c0332543c6029d7da81911 Author: Alexander Lobakin Date: Mon Jul 13 22:09:07 2026 -0400 bitops: make BYTES_TO_BITS() treewide-available [ Upstream commit 7d8296b250f2eed73f1758607926d4d258dea5d4 ] Avoid open-coding that simple expression each time by moving BYTES_TO_BITS() from the probes code to to export it to the rest of the kernel. Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always equals to %BITS_PER_BYTE, regardless of the target architecture. Do the same for the tools ecosystem as well (incl. its version of bitops.h). The previous implementation had its implicit type of long, while the new one is int, so adjust the format literal accordingly in the perf code. Suggested-by: Andy Shevchenko Reviewed-by: Przemek Kitszel Acked-by: Yury Norov Signed-off-by: Alexander Lobakin Signed-off-by: David S. Miller Stable-dep-of: 55052184ac90 ("iio: common: st_sensors: honour channel endianness in read_axis_data") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4b3242acc0d49b40d56c0facc0c6d5f6a62d3796 Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:27 2026 -0400 iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading [ Upstream commit affe3f077d7a4eeb25937f5323ff059a54b4712c ] Timestamps are made by measuring the chip clock using the watermark interrupts. If we read more than watermark samples as done today, we are reducing the period between interrupts and distort the time measurement. Fix that by reading only watermark samples in the interrupt case. Fixes: 7f85e42a6c54 ("iio: imu: inv_icm42600: add buffer support in iio devices") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c2a4f66d80b1fa43868df5f4d42840344b6b5e9e Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:26 2026 -0400 iio: imu: inv_icm42600: stabilized timestamp in interrupt [ Upstream commit d7bd473632d07f8a54655c270c0940cc3671c548 ] Use IRQF_ONESHOT flag to ensure the timestamp is not updated in the hard handler during the thread handler. And compute and use the effective watermark value that correspond to this first timestamp. This way we can ensure the timestamp is always corresponding to the value used by the timestamping mechanism. Otherwise, it is possible that between FIFO count read and FIFO processing the timestamp is overwritten in the hard handler. Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping") Cc: stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240529154717.651863-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4297be773000bf752c06bb58a5a5c92bd29c4956 Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:25 2026 -0400 iio: invensense: fix timestamp glitches when switching frequency [ Upstream commit bf8367b00c33c64a9391c262bb2e11d274c9f2a4 ] When a sensor is running and there is a FIFO frequency change due to another sensor turned on/off, there are glitches on timestamp. Fix that by using only interrupt timestamp when there is the corresponding sensor data in the FIFO. Delete FIFO period handling and simplify internal functions. Update integration inside inv_mpu6050 and inv_icm42600 drivers. Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic") Cc: Stable@vger.kernel.org Signed-off-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0b5078220562aed5b901a22ff1f0c2dc34604c0a Author: Colin Ian King Date: Mon Jul 13 21:16:24 2026 -0400 iio: invensense: remove redundant initialization of variable period [ Upstream commit b58b13f156c00c2457035b7071eaaac105fe6836 ] The variable period is being initialized with a value that is never read, it is being re-assigned a new value later on before it is read. The initialization is redundant and can be removed. Cleans up clang scan build warning: Value stored to 'period' during its initialization is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Acked-by: Jean-Baptiste Maneyrol Link: https://lore.kernel.org/r/20240106153202.54861-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 41a26f1bf5d660feb66735705eb2bee9cfcf237e Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:23 2026 -0400 iio: imu: inv_mpu6050: use the common inv_sensors timestamp module [ Upstream commit 111e1abd00455971f6a568900f033cbddec9d4e5 ] Replace timestamping by the new common inv_sensors timestamp module. The principle behind is the same but the implementation in the new module is far better providing less jitter and a better estimation. Signed-off-by: Jean-Baptiste Maneyrol Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230606162147.79667-5-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 00667f65f1708d5ade82f2b50f1a2259c0b0976a Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:22 2026 -0400 iio: make invensense timestamp module generic [ Upstream commit 0ecc363ccea71eda6a2cceade120489259bcdb33 ] Rename common module to inv_sensors_timestamp, add configuration at init (chip internal clock, acceptable jitter, ...) and update inv_icm42600 driver integration. Signed-off-by: Jean-Baptiste Maneyrol Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit de6134b13a398ab7afed5279f903a17da053abb5 Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:21 2026 -0400 iio: move inv_icm42600 timestamp module in common [ Upstream commit d99ff463ecf651437e9e4abe68f331dfb6b5bd9d ] Create new inv_sensors common modules and move inv_icm42600 timestamp module inside. This module will be used by IMUs and also in the future by other chips. Modify inv_icm42600 driver to use timestamp module and do some headers cleanup. Signed-off-by: Jean-Baptiste Maneyrol Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2c5b5b0fe094b374e78e6641ed4617ed24f2e396 Author: Jean-Baptiste Maneyrol Date: Mon Jul 13 21:16:20 2026 -0400 iio: imu: inv_icm42600: make timestamp module chip independent [ Upstream commit 6e9f2d8375cb24ba75e02e0272e9164d06a1522e ] Move icm42600 dependent function inside the core module. Do some headers cleanup at the same time. Signed-off-by: Jean-Baptiste Maneyrol Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20230606162147.79667-2-inv.git-commit@tdk.com Signed-off-by: Jonathan Cameron Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c15ca35a888fdd74c56857a3bd272edbc66616a2 Author: Zhang Lixu Date: Mon Jul 13 14:44:09 2026 -0400 iio: hid-sensor-rotation: Fix stale or zero output when reading raw values [ Upstream commit 3ce8d099e0afc5a7da75a2007a67f67c4f5a4af1 ] When reading the raw quaternion attribute (in_rot_quaternion_raw), the driver currently returns either all zeros (if the sensor was never enabled) or stale data (if the sensor was previously enabled) because it reads from the internal buffer without explicitly requesting a new sample from the sensor. To fix this, power up the sensor, call sensor_hub_input_attr_read_values() to issue a synchronous GET_REPORT and receive the full quaternion data directly into a local buffer, then decode the four components. Fixes: fc18dddc0625 ("iio: hid-sensors: Added device rotation support") Signed-off-by: Zhang Lixu Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fbbdda9b5eccde446185d12653c6b297891a9aae Author: Runyu Xiao Date: Mon Jul 13 14:13:17 2026 -0400 iio: imu: adis: add IRQF_NO_THREAD to non-FIFO trigger IRQ [ Upstream commit 6e1b9bff1202da55c464e36bd34a2b6863d7fe30 ] devm_adis_probe_trigger() registers iio_trigger_generic_data_rdy_poll() through devm_request_irq() on the non-FIFO path, but it does not add IRQF_NO_THREAD to the IRQ flags. When the kernel is booted with forced IRQ threading, the parent IRQ can otherwise be threaded by the IRQ core and the subsequent IIO trigger child IRQ is then dispatched from irq/... thread context instead of hardirq context. Because iio_trigger_generic_data_rdy_poll() immediately drives iio_trigger_poll(), this violates the hardirq-only IIO trigger helper contract and can push downstream trigger consumers through the wrong execution context. Add IRQF_NO_THREAD on top of the existing adis->irq_flag value for the non-FIFO request_irq() path, while preserving the current trigger polarity and IRQF_NO_AUTOEN behavior. Fixes: fec86c6b8369 ("iio: imu: adis: Add Managed device functions") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6ff054cc02a763914773b026cacb429e5fbf64fa Author: Rafael J. Wysocki Date: Fri Jul 10 10:38:56 2026 -0400 ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup [ Upstream commit 38bf27511ef41bffebd157ec3eba41fc89ba59cd ] If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on driver removal, any subsequent ACPI MCE will lead to a use-after-free like in the previous case. To address the first issue mentioned above, make acpi_nfit_probe() call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and to address the other one, add a remove callback to the driver and make it call acpi_nfit_shutdown(). Also, since it is now possible to pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it may not have been initialized, add checks against NULL for acpi_desc and its nvdimm_bus field to that function and make acpi_nfit_unregister() clear the latter after unregistering the NVDIMM bus. Fixes: a61fe6f7902e ("nfit, tools/testing/nvdimm: unify common init for acpi_nfit_desc") Fixes: fbabd829fe76 ("acpi, nfit: fix module unload vs workqueue shutdown race") Signed-off-by: Rafael J. Wysocki Cc: All applicable Reviewed-by: Dave Jiang Link: https://patch.msgid.link/1963615.tdWV9SEqCh@rafael.j.wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a6385fccc82a7773250626a5bdc7a5b4098e33de Author: Jeremy Linton Date: Fri Jul 10 09:30:16 2026 -0400 ACPI: CPPC: Suppress UBSAN warning caused by field misuse [ Upstream commit 1b1acf2dada0cc3931bb2cb9ff8832edfbee46a1 ] The definition of reg->access_width changes depending on the reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses access_width to indicate the PCC region, which can result in a UBSAN if the value is greater than 4. For example: UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9 shift exponent 32 is too large for 32-bit type 'int' CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy) Hardware name: To be filled by O.E.M. Call trace: ...(trimming) ubsan_epilogue+0x10/0x48 __ubsan_handle_shift_out_of_bounds+0xdc/0x1e0 cpc_write+0x4d0/0x670 cppc_set_perf+0x18c/0x490 cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq] ... (trimming) Lets fix this by validating the region type, as well as whether access_width has a value. Then since we are returning bit_width directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting the size. Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Jeremy Linton Tested-by: Jarred White Reviewed-by: Jarred White Reviewed-by: Easwar Hariharan Cc: All applicable Link: https://patch.msgid.link/20260601235808.1113137-1-jeremy.linton@arm.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c367af37ce7238c96c6071337149099467160746 Author: Pengpeng Hou Date: Fri Jul 3 15:39:43 2026 +0800 mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout commit 17a8ce84964f243c8f89dc7353ac7e8d3137bc74 upstream. lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. Fixes: 2944a44da09e ("mtd: add LPC32xx SLC NAND driver") Cc: stable@vger.kernel.org Reviewed-by: Vladimir Zapolskiy Signed-off-by: Pengpeng Hou Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit be6ce292cb2809241a0539a3bc26fff347c5ba40 Author: Pengpeng Hou Date: Fri Jul 3 15:37:59 2026 +0800 mtd: rawnand: lpc32xx_mlc: fail DMA transfers on timeout commit dbf590b662695b16fbf5917ef129697be4410ea9 upstream. lpc32xx_xmit_dma() starts a DMA transfer and waits up to one second for its completion, but it ignores the wait result and returns success after unmapping the buffer. A timed out read can therefore return success with incomplete data, and a timed out write can continue the NAND operation without proof that the DMA payload reached the controller. Terminate the DMA channel on timeout, unmap the scatterlist through the existing cleanup path, and return -ETIMEDOUT to the NAND read/write callers. Initialize the shared cleanup-path result before using it for dmaengine_prep_slave_sg() failures. Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver") Cc: stable@vger.kernel.org Reviewed-by: Vladimir Zapolskiy Signed-off-by: Pengpeng Hou Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit eb18dcd3b4a8792731ab3dc74ae6835ab7f96632 Author: Pengpeng Hou Date: Fri Jul 3 15:42:33 2026 +0800 mtd: rawnand: fsl_ifc: return errors for failed page reads commit f9a13e05a327080c3a1c8165adf9e678fb68fef2 upstream. fsl_ifc_run_command() logs controller timeout and other non-OPC completion states in ctrl->nand_stat. fsl_ifc_read_page() then only increments the ECC failure counter for non-OPC status and still returns max_bitflips, which can be zero. Return -ETIMEDOUT when the command did not complete at all and -EIO for other non-OPC read completions so the NAND core does not treat a failed page read as a clean page. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 8344611477c9241f45f20981990780fc5f0996f8 Author: Runyu Xiao Date: Wed Jun 17 23:23:19 2026 +0800 mmc: vub300: defer reset until cmd_mutex is unlocked commit ee5fb641c4ccac8406c668d3e947eb20ce44f233 upstream. vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 2e179b028da9fd628a09286a2c9df4fa076b2cc9 Author: Pengpeng Hou Date: Fri Jul 3 15:40:52 2026 +0800 mtd: mchp23k256: use SPI match data for chip caps commit d322e40f4edf92bf0ca329e5aa4ae1c0316feb38 upstream. The driver stores chip capacity information in both the OF match table and the SPI id table. Probe currently uses of_device_get_match_data(), so a non-OF SPI modalias match falls back to mchp23k256_caps even when the SPI id table selected a different part. Use spi_get_device_match_data() so SPI id-table driver_data is consumed when OF match data is absent. This keeps the existing default fallback while avoiding the wrong MTD geometry for id-table-only matches. Fixes: 4379075a870b ("mtd: mchp23k256: Add support for mchp23lcv1024") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 302020a55add3098c5c655c2797182dcff9434df Author: Pengpeng Hou Date: Fri Jul 3 15:43:50 2026 +0800 mtd: onenand: samsung: report DMA completion timeouts commit d03a19bd6c7f86b99ca8fb61a6ec2345cee1d9d6 upstream. The S5PC110 OneNAND DMA helpers have bounded waits for transfer completion. The polling helper falls out of its timeout loop and returns success, and the IRQ helper ignores wait_for_completion_timeout(). Return -ETIMEDOUT when the DMA transfer-done bit or completion does not arrive before the timeout so callers can treat the buffer transfer as failed. Fixes: e23abf4b7743 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 5796eabe435d83544b6fe39851ce47ca68fdb778 Author: Rafael Beims Date: Fri Jun 12 09:25:46 2026 -0300 wifi: mwifiex: fix permanently busy scans after multiple roam iterations commit d78a407bad6f500884a8606aea1a5a9207be4030 upstream. In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Rafael Beims Reviewed-by: Jeff Chen Link: https://patch.msgid.link/20260612122547.1586872-2-rafael@beims.me Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit e8d94089ba4d00ae61ea245562e6316280fab67a Author: Zhiling Zou Date: Sat Jun 27 00:58:30 2026 +0800 wifi: mac80211: free ack status frame on TX header build failure commit 2c51457d930f723e5f2903af90f5847f7df53f42 upstream. ieee80211_build_hdr() stores an ACK status frame before it has finished all validation and header construction. If a later error path is taken, the transmit skb is freed but the stored ACK status frame remains in local->ack_status_frames. This can happen for control port frames when the requested MLO link ID does not match the link selected for a non-MLO station. Repeated failures can fill the ACK status IDR and leave pending ACK frames until hardware teardown. Remove any stored ACK status frame before returning an error after it has been inserted into the IDR. Fixes: a729cff8ad51 ("mac80211: implement wifi TX status") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Assisted-by: Codex:gpt-5.4 Signed-off-by: Zhiling Zou Signed-off-by: Ren Wei Link: https://patch.msgid.link/9de0423da840e92084915b8f92e66a421245c4b8.1782462409.git.roxy520tt@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit d479a7711f8ff127946467b910d947bd971b94ed Author: Junrui Luo Date: Mon Jun 1 15:50:00 2026 +0800 powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access() commit 47b87f469a35b5ffc81c16eee6b13a9b6c8d55c6 upstream. spufs_mem_mmap_access() computes the local store offset as address - vma->vm_start, but bounds-checks it against vma->vm_end instead of the local store size. On 64-bit, offset is always well below vma->vm_end, so the clamp never fires and len stays unbounded against the LS_SIZE buffer returned by ctx->ops->get_ls(). Reject offsets at or beyond LS_SIZE and clamp len to the remaining space, mirroring the guard already used by spufs_mem_mmap_fault() and spufs_ps_fault(). Fixes: a352894d0705 ("spufs: use new vm_ops->access to allow local state access from gdb") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/SYBPR01MB7881EE775E8B51C09F5A29E7AF152@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Greg Kroah-Hartman commit ec836995c00a1968e403ef6beb53a73a9b0f318c Author: Zhao Dongdong Date: Wed Jun 17 11:16:27 2026 +0800 reset: sunxi: fix memory region leak on ioremap failure commit 1a8c89f8c112c75e84ff9a140f969e372aed0c9a upstream. In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure. Fixes: 8f1ae77f4666 ("reset: Add Allwinner SoCs Reset Controller Driver") Cc: stable@vger.kernel.org Signed-off-by: Zhao Dongdong Reviewed-by: Philipp Zabel Acked-by: Jernej Skrabec Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman commit 95d4511d81b2b37e5d2bdde5d912e48243eae517 Author: Julian Anastasov Date: Wed Jul 8 21:03:15 2026 +0300 ipvs: fix more places with wrong ipv6 transport offsets commit b3fe4cbd583895987935a9bdad01c8f9d3a02310 upstream. Sashiko reports for more incorrect IPv6 transport offsets. The app code for TCP was assuming IPv4 network header even after the ipvsh argument was provided. This can cause problems with apps over IPv6. As for the only official app in the kernel tree (FTP) this problem is harmless because we use Netfilter to mangle the FTP ports and we do not adjust the TCP seq numbers. Also, provide correct offset of the ICMPV6 header in ip_vs_out_icmp_v6() for correct checksum checks when the IPv6 packet has extension headers. Fixes: d12e12299a69 ("ipvs: add ipv6 support to ftp") Fixes: 2a3b791e6e11 ("IPVS: Add/adjust Netfilter hook functions and helpers for v6") Cc: stable@vger.kernel.org Link: https://sashiko.dev/#/patchset/20260706101624.69471-1-zhaoyz24%40mails.tsinghua.edu.cn Signed-off-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 8937b11f1c3896e066c3fb07387ba17bc8c50b8a Author: Maoyi Xie Date: Thu Jul 2 16:27:45 2026 +0800 memstick: ms_block: reject a card that reports too many blocks commit 718178f524b98bc920d74bc771aed823c8b81425 upstream. msb_ftl_initialize() computes the zone count from the card block count with no bound: msb->zone_count = msb->block_count / MS_BLOCKS_IN_ZONE; ... for (i = 0; i < msb->zone_count; i++) msb->free_block_count[i] = MS_BLOCKS_IN_ZONE; msb->block_count is a card value. msb_read_boot_blocks() reads number_of_blocks from the card boot page and byte swaps it. free_block_count is a fixed int[MS_MAX_ZONES]. MS_MAX_ZONES is 16, so the valid indices are 0 to 15. The init loop above indexes it by zone_count. msb_mark_block_used() and msb_mark_block_unused() index it by pba / MS_BLOCKS_IN_ZONE, for pba up to block_count - 1. A card may report up to 65535 blocks. A block_count above 8192 (MS_MAX_ZONES * MS_BLOCKS_IN_ZONE) lets the pba index reach 16. That writes past free_block_count[] and corrupts struct msb_data. A larger count runs the init loop past the end too. A real Memory Stick has at most 16 zones. So it has at most 8192 blocks. msb_ftl_initialize() now rejects a card that reports more than MS_MAX_ZONES * MS_BLOCKS_IN_ZONE blocks. Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 48eb82b6d51431c0e28d812365f6eca68354e116 Author: James Raphael Tiovalen Date: Sun Jul 5 19:36:29 2026 +0800 macsec: fix promiscuity refcount leak in macsec_dev_open() commit 7410d11460eb90d6c9281162ccc6a128534d897d upstream. When a MACsec interface with IFF_PROMISC set is brought up on top of a device that has hardware offload enabled, macsec_dev_open() first calls dev_set_promiscuity(real_dev, 1) and then propagates the open to the offload device. If that propagation fails, the error path jumps to the clear_allmulti label, which only reverts allmulti and the unicast address. The promiscuity taken on the lower device is never dropped, so real_dev is left permanently stuck in promiscuous mode. Its promiscuity count can no longer be balanced from software. Add a clear_promisc label that drops the promiscuity reference and route the two offload failure paths to it. The dev_set_promiscuity() failure itself still jumps to clear_allmulti, since on that failure the count was not incremented. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Cc: stable@vger.kernel.org Signed-off-by: James Raphael Tiovalen Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20260705113629.187490-1-jamestiotio@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 177534e078117040c9cd8bd3b4741621ab61a780 Author: Xuanqiang Luo Date: Sun Jul 12 21:03:43 2026 +0800 llc: fix SAP refcount leak when creating incoming sockets commit 2c72eb6286347d05a885412fb076993bd5286b53 upstream. llc_sap_add_socket() takes a SAP reference for each socket added to a SAP, and llc_sap_remove_socket() releases it. llc_create_incoming_sock() takes an additional SAP reference after adding the child socket. This extra reference was balanced by an explicit llc_sap_put() in llc_ui_release() until commit 3100aa9d74db ("llc: fix SAP reference counting w.r.t. socket handling") removed that put. The corresponding hold in the accept path was left behind. When such a child socket is removed, only the reference taken by llc_sap_add_socket() is released. The extra reference keeps the SAP alive after its last socket is removed. Remove the obsolete hold. Fixes: 3100aa9d74db ("llc: fix SAP reference counting w.r.t. socket handling") Cc: stable@vger.kernel.org Signed-off-by: Xuanqiang Luo Link: https://patch.msgid.link/20260712130343.518797-1-xuanqiang.luo@linux.dev Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit bda3c598ade6ea03884074b91e31608326684921 Author: Laxman Acharya Padhya Date: Fri Jul 10 23:10:03 2026 +0545 Bluetooth: btrtl: validate firmware patch bounds commit 609c5b04a28dc1b0f3af6a7bc93055135b2d2059 upstream. rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the firmware version. A malformed firmware patch shorter than the version field can make this subtraction underflow and turn the copy into an oversized read and write during Bluetooth setup. The existing patch_offset + patch_length check can also wrap on 32-bit architectures. Validate the patch length and range without arithmetic overflow before allocating or copying the patch. Fixes: db33c77dddc2 ("Bluetooth: btrtl: Create separate module for Realtek BT driver") Cc: stable@vger.kernel.org Signed-off-by: Laxman Acharya Padhya Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit ab855641241387db062a5e41d9ad6b8561542572 Author: Asim Viladi Oglu Manizada Date: Mon Jul 6 09:44:10 2026 +0000 net: openvswitch: reject oversized nested action attrs commit 3f1f755366687d051174739fb99f7d560202f60b upstream. Open vSwitch stores generated flow actions as nlattrs, whose nla_len field is u16. Commit a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") allowed the total sw_flow_actions stream to grow beyond 64 KiB, which is valid, but also removed the last guard preventing a generated nested action attribute from exceeding U16_MAX. An oversized generated container can thus be closed with a truncated nla_len. A later dump or teardown then walks a structurally different stream than the one that was validated. In particular, an oversized nested CLONE/CT action may cause subsequent bytes in the generated stream to be interpreted as independent actions. Keep the larger total-action-stream behavior, but make nested action close reject generated containers that do not fit in nla_len, and return the error through all callers. For recursive SAMPLE, CLONE, DEC_TTL, and CHECK_PKT_LEN builders, trim resource-owning action-list tails in reverse construction order before discarding failed wrappers, so resources copied into the rejected tails are released before the wrappers are removed. Most failed outer wrappers are discarded by truncating actions_len after child resources have been released. CHECK_PKT_LEN also trims its parent after branch resources are gone. SET/TUNNEL close failures unwind their known tun_dst ownership directly, and SET_TO_MASKED has no external ownership and truncates on close failure. Fixes: a1e64addf3ff ("net: openvswitch: remove misbehaving actions length check") Cc: stable@vger.kernel.org Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix Signed-off-by: Asim Viladi Oglu Manizada Reviewed-by: Eelco Chaudron Reviewed-by: Aaron Conole Reviewed-by: Ilya Maximets Link: https://patch.msgid.link/20260706094336.38639-1-manizada@pm.me Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit fda912c59e53dade0ad77fe754157d7421f9484a Author: Abhishek Ojha Date: Wed Jul 15 13:04:08 2026 -0400 regulator: ltc3676: Fix incorrect IRQSTAT bit offsets commit 50dce2e2f84b56d8b4b406d97a1543709e8a87f5 upstream. The LTC3676_IRQSTAT_* bit definitions do not match the IRQSTAT (Interrupt Request Status) register layout documented in Table 15 of the LTC3676/LTC3676-1 datasheet: bit 0 - Pushbutton Status Active bit 1 - Hard Reset Occurred bit 2 - PGOOD Timeout Occurred bit 3 - Undervoltage Warning bit 4 - Undervoltage Standby (Fault) Occurred bit 5 - Overtemperature Warning bit 6 - Overtemperature Standby (Fault) Occurred bit 7 - Reserved The driver instead defines these starting at bit 3, one bit higher than the datasheet specifies, which causes ltc3676_regulator_isr() to check the wrong status bits and misreport (or miss) PGOOD timeout, undervoltage and thermal warning/fault conditions. Fix the bit offsets to match the datasheet. Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Ojha Link: https://patch.msgid.link/20260715170408.295552-1-Abhishek.ojha@savoirfairelinux.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 3d8b9b290421c3cd505fcd2f551f143f8142786a Author: Dawei Feng Date: Mon Jul 6 22:35:07 2026 +0800 wifi: mac80211: fix memory leak in ieee80211_register_hw() commit 95fc02722edde02946d0d475221f2b2054d3d8ba upstream. If kmemdup() fails while copying supported band structures, the error path jumps to fail_rate. This skips rate_control_deinitialize() and leaks the initialized local->rate_ctrl. Fix this by adding a fail_band label that shares the rate-control cleanup path before falling through to the remaining teardown. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable mac80211 device/driver combination to test with, no runtime testing was able to be performed. Fixes: 09b4a4faf9d0 ("mac80211: introduce capability flags for VHT EXT NSS support") Cc: stable@vger.kernel.org Reviewed-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260706143507.146131-1-dawei.feng@seu.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 59afe6148927395cf86f9429900e029a48b1d42b Author: Runyu Xiao Date: Fri Jun 19 15:31:04 2026 +0800 wifi: rt2x00: avoid full teardown before work setup in probe commit 536fb3d739d75a03cb318c0c6fe799425cfea501 upstream. rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. Fixes: 1ebbc48520a0 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.") Fixes: 0439f5367c8d ("rt2x00: Move TX/RX work into dedicated workqueue") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit fcc8c310539c3cc523419113b227161a96b50550 Author: Farhad Alemi Date: Mon Jul 6 10:20:23 2026 +0200 cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed commit b983c56426383e4a06fa5970c4e33cee879b1482 upstream. Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. Link: https://lore.kernel.org/all/CA+0ovCiEz6SP_sn3kN4Tb+_oC=eHMXy_Ffj=usV3wREdQrUtww@mail.gmail.com/ Fixes: ae1c802382f7 ("cpuset: apply cs->effective_{cpus,mems}") Closes: https://lore.kernel.org/linux-mm/CA+0ovCgxbZkXa+OU8w3s84R3KNPNxxRfmsNR-udh+afQBbGNmw@mail.gmail.com/ Suggested-by: Gregory Price Suggested-by: Waiman Long Acked-by: Waiman Long Signed-off-by: Farhad Alemi Cc: Andrew Morton Cc: Alistair Popple Cc: Byungchul Park Cc: Gregory Price Cc: "Huang, Ying" Cc: Joshua Hahn Cc: Matthew Brost Cc: Rakie Kim Cc: Rasmus Villemoes Cc: Zi Yan Cc: Tejun Heo Cc: Ridong Chen Cc: Johannes Weiner Cc: "Michal Koutný" Cc: [ david: add a comment, slightly rephrase description ] Signed-off-by: David Hildenbrand (Arm) Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit 606cc45e871e34b80a2f63874f069387a5b44176 Author: Tao Liu Date: Mon Jul 6 11:27:07 2026 +1200 riscv: Prevent NULL pointer dereference in machine_kexec_prepare() commit 81bbcff0c053c4f5c711c31a9b72fc492bd96c3f upstream. A NULL pointer dereference issue is noticed in riscv's machine_kexec_prepare(), where image->segment[i].buf might be NULL and copied unchecked. The NULL buf comes from ima_add_kexec_buffer(), where kbuf is added by kexec_add_buffer(), but kbuf.buffer is NULL, then it is copied without a check in machine_kexec_prepare(): kexec_file_load -> kimage_file_alloc_init() -> kimage_file_prepare_segments() -> ima_add_kexec_buffer() -> kexec_add_buffer() -> machine_kexec_prepare() -> memcpy() Address this by adding a check before the data copy attempt. Fixes: b7fb4d78a6ad ("RISC-V: use memcpy for kexec_file mode") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/kexec/CAO7dBbVftLUhd2qrh7hmijTB3PEPfZAhykCGqEfrPoOcSrrj-w@mail.gmail.com/ Acked-by: Baoquan He Acked-by: Pratyush Yadav Reviewed-by: Nutty Liu Signed-off-by: Tao Liu Link: https://patch.msgid.link/20260705232706.30265-2-ltao@redhat.com Signed-off-by: Paul Walmsley Signed-off-by: Greg Kroah-Hartman commit 741a682535deffe9ab7e5c89caf83571efbc9dd9 Author: Michael Bommarito Date: Thu Jul 9 22:28:37 2026 -0400 drbd: reject data replies with an out-of-range payload size commit bd910a7660d280595ef94cb6d193951d855d330f upstream. recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required. Fixes: b411b3637fa7 ("The DRBD driver") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5-5-xhigh Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Christoph Böhmwalder Link: https://patch.msgid.link/20260710022837.3738461-1-michael.bommarito@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 6378c5cb360eb1750f88839d7c3613ea92ac1816 Author: Yizhou Zhao Date: Thu Jul 2 19:28:36 2026 +0800 ipvs: reset full ip_vs_seq structs in ip_vs_conn_new commit 2975324d164c552b028632f107b567302863b7f6 upstream. Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later. Fixes: 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: Claude-Code:GLM-5.2 Signed-off-by: Yizhou Zhao Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 9f94573ab962a9e81954b755da016fa3cd2f5039 Author: Yizhou Zhao Date: Mon Jul 6 18:16:24 2026 +0800 ipvs: use parsed transport offset in SCTP state lookup commit 2f75c0faa3361b28e36cc0512b3299e163e25789 upstream. set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset. Fixes: 2906f66a5682 ("ipvs: SCTP Trasport Loadbalancing Support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/netdev/20260705123040.35755-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao Acked-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit a2f9fa31ae021ef1fdcaf3ab17bd49f9223dd6a4 Author: Shuangpeng Bai Date: Tue Jun 30 15:48:56 2026 -0400 llc: fix SAP refcount leak in llc_ui_autobind() commit 660667cd406648bbaffbd5c0d897c2263a852f11 upstream. llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Shuangpeng Bai Link: https://patch.msgid.link/20260630194856.1036497-1-shuangpeng.kernel@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 2039f27b1a0c997137a5de7f8a3cee0e80fbf952 Author: Yousef Alhouseen Date: Wed Jul 1 18:42:22 2026 +0200 mac802154: remove interfaces with RCU list deletion commit 539dfcf69105d8d3d4d677b71de6e5ede2e6dfa0 upstream. Queue wake, stop, and disable paths walk local->interfaces under RCU. The bulk hardware teardown path removes entries with list_del(), so an asynchronous transmit completion can follow a poisoned list node in ieee802154_wake_queue(). Use list_del_rcu() as in the single-interface removal path. The following unregister_netdevice() waits for in-flight RCU readers before freeing the netdevice, so no separate grace-period wait is needed. Fixes: 592dfbfc72f5 ("mac820154: move interface unregistration into iface") Reported-by: syzbot+36256deb69a588e9290e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=36256deb69a588e9290e Cc: stable@vger.kernel.org Signed-off-by: Yousef Alhouseen Reviewed-by: Kuniyuki Iwashima Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260701164222.9094-1-alhouseenyousef@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit d39cf4a6d721b1ae21eb53bbf3e8cd984253d7ab Author: Gerald Schaefer Date: Tue Jun 23 19:44:06 2026 +0200 s390/monwriter: Reject buffer reuse with different data length commit 2995ccec260caa9e85b3301a4aba1e66ed80ad74 upstream. When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. Cc: stable@vger.kernel.org Signed-off-by: Gerald Schaefer Reviewed-by: Christian Borntraeger Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 459b0a0439ea65b2b612aa572eb62a2e26d05618 Author: HyeongJun An Date: Fri Jun 19 21:27:46 2026 +0900 hwmon: (asus_atk0110) Check package count before accessing element commit e2735b39f044bad7bf2017aef248935525bc0b97 upstream. atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package.count check first. Add the same check to atk_ec_present() so a malformed firmware package cannot trigger an out-of-bounds read. Fixes: 9e6eba610c2e ("hwmon: (asus_atk0110) Enable the EC") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Link: https://lore.kernel.org/r/20260619122746.721981-1-sammiee5311@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 7a1ab6c6d7e71e19269bc5842310305f8ddbfe44 Author: Wentao Liang Date: Thu Jun 25 22:18:37 2026 +0800 ata: pata_pxa: Fix DMA channel leak on probe error commit fcaf242e7fc406e78f444a35441e3b58f5e28781 upstream. When dmaengine_slave_config() fails, the DMA channel acquired by dma_request_chan() is not released before returning the error, leaking the channel reference. Fix by adding dma_release_channel() in the error path. The ata_host_activate() error path already correctly releases the DMA channel. Cc: stable@vger.kernel.org Fixes: 88622d80af82 ("ata: pata_pxa: dmaengine conversion") Signed-off-by: Wentao Liang Reviewed-by: Niklas Cassel Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman commit a72bbb43689591c9d36e3bb45c2d4e688cf92682 Author: Bryam Vargas Date: Fri Jun 19 04:38:20 2026 -0500 orangefs: keep the readdir entry size 64-bit in fill_from_part() commit 18227a6bc98bd0ba96ed3ce9d5b28776a5a28dfc upstream. fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client. Fixes: 480e3e532e31 ("orangefs: support very large directories") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260619-b4-disp-50d2bd59-v1-1-ce332969b4a2@proton.me Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit e894b054be55c1ceda6ba20aaa29518b363dd310 Author: Masami Hiramatsu (Google) Date: Thu Jun 25 08:34:47 2026 +0900 tracing/probes: Fix double addition of offset for @+FOFFSET commit 9a667b7750dda88cbf1cca96a53a2163b2ee71f7 upstream. Since commit 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code") wrongly use @offset local variable during the parsing, the offset value is added twice when dereferencing. Reset the @offset after setting it in FETCH_OP_FOFFS. Link: https://lore.kernel.org/all/178217905962.643090.1978577464942171332.stgit@devnote2/ Fixes: 533059281ee5 ("tracing: probeevent: Introduce new argument fetching code") Signed-off-by: Masami Hiramatsu (Google) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit eb1a9637f0bd84b5db8803af65dfb1f44785406f Author: Bryam Vargas Date: Thu Jun 25 04:51:20 2026 -0500 net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked commit 54f6b0c843e228d499eb4b6bbb89df68cad9ad5d upstream. multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected. Fixes: 77be155cba4e ("pkt_sched: Add peek emulation for non-work-conserving qdiscs.") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Reviewed-by: Victor Nogueira Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260625-b4-disp-31bcb279-v1-2-85c40b83c529@proton.me Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b2dfe786bf447c9c3e10e34afa3acdcf8a1ec9e7 Author: Haoxiang Li Date: Thu Jun 25 08:48:34 2026 +0800 fsl/fman: Free init resources on KeyGen failure in fman_init() commit d288efa2b94abc2e45a061fceb156b4f4e5b37be upstream. fman_muram_alloc() allocates initialization resources before initializing the KeyGen block. If keygen_init() fails, the function returns -EINVAL directly and leaves those resources allocated. Free the initialization resources before returning from the KeyGen failure path. Fixes: 7472f4f281d0 ("fsl/fman: enable FMan Keygen") Cc: stable@kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Pavan Chebbi Reviewed-by: Breno Leitao Link: https://patch.msgid.link/20260625004834.3394389-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 4a45884566bab4122bbeb8fff7d2d6b5fdbded24 Author: Haoxiang Li Date: Wed Jun 24 14:40:13 2026 +0800 net: liquidio: fix BAR resource leak on PF number failure commit c63ee62a3c4ac1a1542f4c1a4b87e2f41df5a496 upstream. If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review. Fixes: 0c45d7fe12c7 ("liquidio: fix use of pf in pass-through mode in a virtual machine") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Larysa Zaremba Link: https://patch.msgid.link/20260624064013.2809570-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d80798bc4b396fd68f5ead354836a4202add550c Author: Pengpeng Hou Date: Mon Jun 15 14:48:06 2026 +0800 hwmon: (w83793) remove vrm sysfs file on probe failure commit 77b983757280c69b0290811669ff1d31022e5f1d upstream. w83793_probe() creates the vrm sysfs file after creating the VID files when VID support is present. The normal remove path deletes vrm, but the probe error path only removes the sensor, SDA, VID, fan, PWM and temperature files. A later probe failure can therefore leave vrm behind after the driver data has been freed. Remove vrm in the probe error path next to the VID files, matching the normal remove path. Signed-off-by: Pengpeng Hou Link: https://lore.kernel.org/r/20260615064806.51139-1-pengpeng@iscas.ac.cn Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 02e822e903bf935a236b667a5623793e1ec35935 Author: Pengpeng Hou Date: Mon Jun 15 14:47:31 2026 +0800 hwmon: (w83627hf) remove VID sysfs files on error and remove commit 5264b389c4e02dec214a46c400eb3ab867a7749a upstream. w83627hf_probe() creates cpu0_vid and vrm with device_create_file() when VID information is available. The error path and remove callback only remove the common and optional attribute groups. Those groups do not contain cpu0_vid or vrm, so the files can remain after a later probe failure or after device removal while their callbacks still expect live driver data. Remove the standalone VID sysfs files from both the probe error path and the remove callback. Signed-off-by: Pengpeng Hou Link: https://lore.kernel.org/r/20260615064732.48113-1-pengpeng@iscas.ac.cn Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit c51b280b9cd3c9e97bf2cde33bb795c511f09669 Author: Abdun Nihaal Date: Sat Jun 20 11:53:50 2026 +0530 bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp() commit a986fde914d88af47eb78fd29c5d1af7952c3500 upstream. If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation. Cc: stable@vger.kernel.org Fixes: 15192a8cf8a8 ("bnx2x: Split the FP structure") Signed-off-by: Abdun Nihaal Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260620062402.89549-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 06ae245168268b705a204f93c318b30107d10e92 Author: Sven Eckelmann Date: Mon Jul 20 15:49:54 2026 +0200 batman-adv: clean untagged VLAN on netdev registration failure commit 8669a550c752d86baebc5fdc83b8ff35c4372c0e upstream. When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the untagged batadv_meshif_vlan must thefore be done in the destructor to avoid a leak of this object. Cc: stable@vger.kernel.org Fixes: 5d2c05b21337 ("batman-adv: add per VLAN interface attribute framework") [ switch to old "mesh_iface" name "soft_iface" ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 38cd10b0aeec755d89f78722a2b83f4088ff0cb0 Author: Sven Eckelmann Date: Mon Jul 20 15:34:30 2026 +0200 batman-adv: ensure minimal ethernet header on TX commit 49df66b7993c80b80c7eb9a84ba5b3410c8296a0 upstream. As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. Cc: stable@vger.kernel.org Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Reported-by: Sashiko [ move from mesh- to soft-interface.c ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit a1820344b180cb55af748f102bc536b5c93164db Author: Sven Eckelmann Date: Mon Jul 20 15:26:40 2026 +0200 batman-adv: retrieve ethhdr after potential skb realloc on RX commit 035e1fed892d3d06002a73ff73668f618a514644 upstream. pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the VLAN header but missed for the ethernet header which is later used for the TT and AP isolation handling. Cc: stable@vger.kernel.org Reported-by: Sashiko Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Fixes: c78296665c3d ("batman-adv: Check skb size before using encapsulated ETH+VLAN header") [ move from mesh- to soft-interface.c ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit ba35b1c674ca3841c0dfadd698f2c1b3ec542d4e Author: Shivam Kumar Date: Mon Jul 20 09:45:50 2026 -0400 nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path commit 4606467a75cfc16721937272ed29462a750b60c8 upstream. In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request(). Reviewed-by: Christoph Hellwig Signed-off-by: Shivam Kumar Signed-off-by: Keith Busch [shivam: inlined nvmet_tcp_finish_cmd() at the fix site for 5.15.y] Signed-off-by: Shivam Kumar Signed-off-by: Sasha Levin commit 093aacb0c56d5c693e3169a0224062e77c3fd0c0 Author: Shitalkumar Gandhi Date: Wed May 20 16:27:50 2026 +0530 ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit commit 6d7f7bcf225b2d566176bf6229dbd1252940cb3c upstream. ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Cc: stable@vger.kernel.org Signed-off-by: Shitalkumar Gandhi Reviewed-by: Simon Horman Link: https://lore.kernel.org/20260520105750.30144-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit b07aea90dbc6e188c74c100af64b77b9482ffc65 Author: Shitalkumar Gandhi Date: Tue Apr 21 13:02:59 2026 +0530 ieee802154: ca8210: fix cas_ctl leak on spi_async failure commit e09390e439bd7cca30dd10893b1f64802961667a upstream. ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync(). Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Cc: stable@vger.kernel.org Signed-off-by: Shitalkumar Gandhi Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/20260421073259.2259783-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 15fc53254ecf354ac403fca077f67cda932fecb6 Author: Michael Bommarito Date: Wed May 20 10:16:40 2026 -0400 ieee802154: allow legacy LLSEC ADD/DEL ops to pass strict validation commit a6bfdfcc6711d1d5a92e98644359dedc67c0c858 upstream. The LLSEC ADD/DEL doit handlers under the legacy IEEE802154_NL family consume IEEE802154_ATTR_LLSEC_KEY_BYTES and IEEE802154_ATTR_LLSEC_KEY_USAGE_COMMANDS, both declared in net/ieee802154/nl_policy.c as bare length entries with no .type (defaulting to NLA_UNSPEC). Generic netlink strict validation rejects all NLA_UNSPEC attributes via validate_nla(), so every LLSEC_ADD_KEY, LLSEC_DEL_KEY, LLSEC_ADD_DEV, LLSEC_DEL_DEV, LLSEC_ADD_DEVKEY, LLSEC_DEL_DEVKEY, LLSEC_ADD_SECLEVEL, and LLSEC_DEL_SECLEVEL request fails at the dispatcher with "Unsupported attribute" before reaching the handler. The doit path has been silently dead since strict validation became the default for genl families that do not opt out. The dump path is unaffected because dump requests carry no LLSEC attributes to validate, which is why the LLSEC_LIST_KEY read remained reachable (patch 1/2). Introduce IEEE802154_OP_RELAXED() mirroring IEEE802154_OP() but with .validate = GENL_DONT_VALIDATE_STRICT, and use it for the eight legacy LLSEC mutate ops so admin-driven LLSEC configuration via the legacy interface works again. Fixes: 3e9c156e2c21 ("ieee802154: add netlink interfaces for llsec") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/20260520141640.1149513-3-michael.bommarito@gmail.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit dffe745760f38fac0b8288e0dc4759b23d9888ff Author: Michael Bommarito Date: Wed May 20 10:16:39 2026 -0400 ieee802154: admin-gate legacy LLSEC dump operations commit 9c1e0b6d49471a712511d23fc9d06901561135e8 upstream. In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY dump on the legacy IEEE802154_NL generic-netlink family. Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the modern nl802154 family exposes their equivalents to unprivileged readers by design (NL802154_CMD_GET_WPAN_PHY and NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged users" annotations). Fixes: 3e9c156e2c21 ("ieee802154: add netlink interfaces for llsec") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/20260520141640.1149513-2-michael.bommarito@gmail.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit e3724dedf57761c6de52f4d604ec74f66fd61611 Author: Maoyi Xie Date: Fri Jun 12 16:59:39 2026 +0800 net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink commit f00a50876d2818bd6dc86fa98b3ef360884c53c8 upstream. ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed. Reported-by: Xiao Liang Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/ Fixes: 690afc165bb3 ("net: ip6_gre: fix moving ip6gre between namespaces") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612085941.3158249-6-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 32edf8aa297745226854eda2d96c0fac66c1bb15 Author: Maoyi Xie Date: Fri Jun 12 16:59:37 2026 +0800 net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink commit 95cceadbfd52d7239bd730afdda0655287d77425 upstream. vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. Reported-by: Xiao Liang Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/ Fixes: 895de9a3488a ("vti4: Enable namespace changing") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612085941.3158249-4-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ef897249dc957089e6f7f11ceea699e093ad51bd Author: Maoyi Xie Date: Fri Jun 12 16:59:40 2026 +0800 net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink commit e2ac3b242c37dff323a964962e43854f4b1a2b79 upstream. vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. Reported-by: Xiao Liang Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/ Fixes: 61220ab34948 ("vti6: Enable namespace changing") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612085941.3158249-7-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5daa63404b708fc74e94da8398affbb148d09044 Author: Dawei Feng Date: Tue Jun 16 22:24:24 2026 +0800 net: ena: clean up XDP TX queues when regular TX setup fails commit 1bd6676254b4ab6acd44b662b5e92822c036463a upstream. create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Reviewed-by: Arthur Kiyanovski Tested-by: Arthur Kiyanovski Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c5a0ae895432596b2f464172da8218e2d84e2932 Author: Maoyi Xie Date: Thu Jun 18 15:08:17 2026 +0800 net: sit: require CAP_NET_ADMIN in the device netns for changelink commit 27ccb68e7cccead5d8c611665a45d23032d468b3 upstream. ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers. Fixes: 5e6700b3bf98 ("sit: add support of x-netns") Link: https://lore.kernel.org/netdev/20260612085941.3158249-1-maoyixie.tju@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Nicolas Dichtel Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260618070817.3378283-1-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 906804d59fbc731fae1375598b9258b8acbe3aef Author: Andreas Kemnade Date: Sat Jul 4 10:40:54 2026 +0200 gpios: palmas: add .get_direction() op commit db4a79713ed8e252d5e4edf6eaaa80948b6855a2 upstream. Accessing debug/gpio is quite noisy without a get_direction() implementation. To calm that down add an implementation. Fixes: 3d50a2785271 ("gpio: palmas: Add support for Palmas GPIO") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij Signed-off-by: Andreas Kemnade Link: https://patch.msgid.link/20260704-palmas-getdirection-v2-1-2fd85fee3832@kemnade.info Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 2408be459c70ef4250da1a9e50f5478e6b250d61 Author: Bradley Morgan Date: Fri Jun 19 16:37:18 2026 +0000 cpu: hotplug: Bound hotplug states sysfs output commit 86f436567f2516a0083b210bedc933544826a2c3 upstream. states_show() adds CPU hotplug state names into a single sysfs buffer using sprintf(). With enough registered states, this can write past the end of the PAGE_SIZE buffer. Use sysfs_emit_at() so output is bounded. Fixes: 98f8cdce1db5 ("cpu/hotplug: Add sysfs state interface") Signed-off-by: Bradley Morgan Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260619163719.12103-2-include@grrlz.net Signed-off-by: Greg Kroah-Hartman commit ef39758637cc5b603fb05b625c45a98aa306e338 Author: Bradley Morgan Date: Fri Jun 19 16:37:17 2026 +0000 cpu: hotplug: Preserve per instance callback errors commit 673db10729fb121ea1b16fe57791a0cb9eac1eb5 upstream. cpuhp_invoke_callback() unwinds earlier callbacks for the same hotplug state when one instance fails. The rollback path currently reuses ret, so a successful rollback can hide the original error and make the failed transition look successful. Keep the rollback result separate from the original error. Fixes: 724a86881d03 ("smp/hotplug: Callback vs state-machine consistency") Signed-off-by: Bradley Morgan Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260619163719.12103-1-include@grrlz.net Signed-off-by: Greg Kroah-Hartman commit b5518c5632f3485849421b9c33b4db5ae6a54ed7 Author: Dmitry Torokhov Date: Fri May 22 10:25:11 2026 -0700 Input: ims-pcu - fix type confusion in CDC union descriptor parsing commit ca459e237bc49567649c56bc72e4c602fb92fd67 upstream. The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 6314bd9e2a6b3362998dc85485dd4b0f133a3532 Author: Dmitry Torokhov Date: Fri May 22 21:42:39 2026 -0700 Input: ims-pcu - fix potential infinite loop in CDC union descriptor parsing commit d4579af29e67ca8722db0a1194227f8015c8981d upstream. The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc() by iterating through the extra descriptor data. However, it does not verify that the bLength of each descriptor is at least 2. A malicious device could provide a descriptor with bLength = 0, leading to an infinite loop in the driver. Add a check to ensure bLength is at least 2 before proceeding with parsing. Fixes: 628329d52474 (Input: add IMS Passenger Control Unit driver) Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit b746e853721dee91e4234c033d1b90f4605705bb Author: Dmitry Torokhov Date: Fri May 22 10:30:21 2026 -0700 Input: ims-pcu - fix out-of-bounds read in ims_pcu_irq() debug logging commit 403b0a6970b1084bb27907c0f8225801fdd0fe1d upstream. The debug logging in ims_pcu_irq() unconditionally prints data from pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the control URB exceeds pcu->max_in_size, this leads to an out-of-bounds read. Fix this by printing from the correct buffer associated with the URB. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit b208bf48c7a59650298d01e49f15cdac2ec1bfcc Author: Dmitry Torokhov Date: Fri May 22 10:30:44 2026 -0700 Input: ims-pcu - fix DMA mapping violation in line setup commit 8adf4289d945e8990e4336436a97da71d21d2cae upstream. In ims_pcu_line_setup(), the driver uses pcu->cmd_buf as a transfer buffer for usb_control_msg(). However, pcu->cmd_buf is embedded in the struct ims_pcu allocation, which violates DMA mapping rules regarding cacheline alignment. Use a heap-allocated buffer for the line coding data instead. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 3e0e8d7f8139a9496e389e7372e3f8b57b3e4e3e Author: Dmitry Torokhov Date: Fri May 22 10:40:54 2026 -0700 Input: ims-pcu - add response length checks commit 48c9d92fd4ee3a8f5d2cb46c802a0eff8e67c79c upstream. The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 7960d99332e03705ec622d92f31e0c77de8baac6 Author: Dmitry Torokhov Date: Fri May 22 10:29:26 2026 -0700 Input: ims-pcu - validate control endpoint type commit baf56975806534268e24acf9a8abb1c447ce11e9 upstream. The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 304c1c5db0855ae265bc74bcb7e939df68b1c168 Author: Dmitry Torokhov Date: Fri May 22 10:22:55 2026 -0700 Input: ims-pcu - release data interface on disconnect commit 441c510a649c8ddce38aa0311334ed8bb546b36c upstream. During probe the driver claims the data interface, but it never releases it. Release it in disconnect to avoid leaving it permanently claimed. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 293388e42e5c0865204de6f36bfb8662156fce3b Author: Dmitry Torokhov Date: Fri May 22 10:24:47 2026 -0700 Input: ims-pcu - fix use-after-free and double-free in disconnect commit 462a999917755a3bf77448dfd64307963cf0a9f0 upstream. ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Reported-by: Sashiko bot Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 42a391d508e1f52fda5d81344e100a53c00898e3 Author: Haoxiang Li Date: Mon Jun 22 15:58:44 2026 +0800 scsi: elx: efct: Fix I/O leak on unsupported additional CDB commit 9cb2d5291dbfe7bed565ead3337047dee9ed1064 upstream. efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. If the command has an unsupported additional CDB, the function returns -EIO before handing the IO to the SCSI layer. Free the allocated IO before returning from this error path. Fixes: f45ae6aac0a0 ("scsi: elx: efct: Unsolicited FC frame processing routines") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Daniel Wagner Link: https://patch.msgid.link/20260622075844.832871-1-haoxiang_li2024@163.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit cf97ea7b164a1881c7219f5222219c9d0fac4204 Author: WenTao Liang Date: Thu Jun 11 13:30:37 2026 +0800 scsi: elx: efct: Fix refcount leak in efct_hw_io_abort() commit 2c007acf7b31c39c08ce4959451ad00b19be4c1f upstream. When efct_hw_reqtag_alloc() fails in efct_hw_io_abort(), the error path returns -ENOSPC without releasing the reference obtained via kref_get_unless_zero() earlier in the function. All other error paths correctly drop the reference. This causes a permanent reference leak on the io_to_abort object. Additionally, the abort_in_progress flag is left set to true on this path, which means future abort attempts for the same I/O will immediately return -EINPROGRESS even though the abort was never submitted, effectively blocking recovery. Fix this by adding the missing kref_put() call and reset abort_in_progress to false, matching the cleanup done in the efct_hw_wq_write() failure path below. Cc: stable@vger.kernel.org Fixes: 63de51327a64 ("scsi: elx: efct: Hardware I/O and SGL initialization") Signed-off-by: WenTao Liang Reviewed-by: Daniel Wagner Link: https://patch.msgid.link/20260611053037.63756-1-vulab@iscas.ac.cn Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 59a2a5a37dc49a641ad6bc64aee34e5a61025ffd Author: Bryam Vargas Date: Wed Jun 10 04:22:48 2026 +0000 scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE commit fda6a1f3c3d7047b5ce5654487649c2daa738bfc upstream. core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT parameter list with transport_kmap_data_sg() and parses the destination TransportID with target_parse_pr_out_transport_id(). For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns the ISID in iport_ptr as a raw pointer into that mapped buffer. The function then unmaps the buffer with transport_kunmap_data_sg() before dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and core_scsi3_alloc_registration(). When the parameter list spans more than one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual address backing iport_ptr is torn down and every subsequent dereference is a use-after-free read of the unmapped region. Keep the parameter list mapped until iport_ptr is no longer needed: drop the early transport_kunmap_data_sg() and unmap once on the success path, right before returning. The error paths already unmap through the existing "if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs on every post-map error exit because buf is no longer cleared early. Only reads of the mapping happen while spinlocks are held; the map and unmap calls remain outside any lock. The sibling caller core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it and is left unchanged. Fixes: 4949314c7283 ("target: Allow control CDBs with data > 1 page") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Reviewed-by: John Garry Reviewed-by: David Disseldorp Link: https://patch.msgid.link/20260610042245.35473-1-hexlabsecurity@proton.me Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 842248047ef28dbf3b3f7f49a0ec315054d4dab8 Author: Bryam Vargas Date: Thu Jun 11 13:42:26 2026 -0500 scsi: target: Bound PR-OUT TransportID parsing to the received buffer commit d04a179085c262c9ed577d0a4cbc6482ff1fd9a3 upstream. core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. Fixes: c66ac9db8d4a ("[SCSI] target: Add LIO target core v4.0.0-rc6") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Reviewed-by: John Garry Reviewed-by: David Disseldorp Link: https://patch.msgid.link/20260611-b4-disp-9f20739e-v6-1-f6630e2aae44@proton.me Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 9c0f6894982b1f13bda220707497b25ac9c95bdb Author: Michael Bommarito Date: Thu Jun 11 08:30:45 2026 -0400 scsi: xen: scsiback: Free unsubmitted command instead of double-putting it commit ca978f8a93d4d36841839bf2847d29b88c2591d6 upstream. scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0; the se_cmd is initialised (kref_init() via target_init_cmd()) only later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB path. The two error paths in scsiback_do_cmd_fn() taken before the command is submitted -- a failed scsiback_gnttab_data_map() and an unknown ring_req.act -- call transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a refcount of 0. That underflows it ("refcount_t: underflow; use-after-free") and, as the release function is not run, leaks the command tag. Impact: a pvSCSI guest can leak every command tag of a LUN's session, stopping the LUN, by submitting requests with a bad grant reference or an unknown request type; under panic_on_warn the refcount underflow panics the host. Add a helper that just returns the tag with target_free_tag() and sends the error response. It frees the tag while the v2p reference still pins the session, and snapshots the response fields beforehand because freeing the tag can let another ring reuse the pending_req slot. Fixes: 2dbcdf33dbf6 ("xen-scsiback: Convert to percpu_ida tag allocation") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Juergen Gross Link: https://patch.msgid.link/20260611123046.2323342-2-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 4567ce79fe2f84c3dcc3a91b22a377cf482d33ad Author: Michael Bommarito Date: Thu Jun 11 08:30:46 2026 -0400 scsi: xen: scsiback: Free the command tag on the TMR submit-failure path commit 66aefc277ebb796ec285d550305535dc3fc0179f upstream. scsiback_device_action() obtains a command tag in scsiback_get_pend_req() and submits a task-management request with target_submit_tmr(). When target_submit_tmr() fails it returns < 0 and scsiback jumps to the err: label, which sends a response but frees nothing, leaking the tag. Impact: a pvSCSI guest can leak the command tags of a LUN's session, stopping the LUN, by issuing VSCSIIF_ACT_SCSI_ABORT or RESET requests whenever target_submit_tmr() fails. transport_generic_free_cmd() cannot be used here. By the time target_submit_tmr() returns an error it has already run __target_init_cmd() (so se_cmd->cmd_kref is one, not zero), and on its target_get_sess_cmd() error path it has freed se_cmd->se_tmr_req via core_tmr_release_req() while leaving SCF_SCSI_TMR_CDB set and the pointer dangling. Letting the command release run target_free_cmd_mem() would then double-free se_tmr_req. Use the same helper, which returns just the tag, on this path too. Fixes: 2dbcdf33dbf6 ("xen-scsiback: Convert to percpu_ida tag allocation") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Juergen Gross Link: https://patch.msgid.link/20260611123046.2323342-3-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit d6285308db4e374f5b7986c41bf765150819ab61 Author: Xu Rao Date: Tue Jul 7 11:08:45 2026 +0800 scsi: sg: Report request-table problems when any status is set commit 1d3a742afeb761eaead774691bde1ced699e9a5d upstream. SG_GET_REQUEST_TABLE reports per-request diagnostic state through sg_req_info::problem. The field is meant to indicate whether there is an error to report for a completed request. sg_fill_request_table() currently combines masked_status, host_status and driver_status with bitwise AND. This only reports a problem when all three status fields are non-zero at the same time. A normal target check condition, for example, has masked_status set while host_status and driver_status may both be zero, so the request is incorrectly reported as clean. Use the same condition as sg_new_read(), which sets SG_INFO_CHECK when any of the three status fields is non-zero. Cc: stable@vger.kernel.org Signed-off-by: Xu Rao Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/54B60C19F7DB8889+20260707030845.970018-1-raoxu@uniontech.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit fb40928c59329a50eadb3ce8bfd7a67f490a6212 Author: Haoxiang Li Date: Tue Jun 23 00:00:28 2026 +0800 scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path commit e166bafc483e927150cb9b5f286c9191ea0df84e upstream. If phys_disk->in_reset is set, the function returns directly without undoing the resources acquired for the command. Add the missing error cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping the SCSI command, and dropping the outstanding IOACCEL command count before returning. Fixes: c5dfd106414f ("scsi: hpsa: correct device resets") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Acked-by: Don Brace Link: https://patch.msgid.link/20260622160028.1240496-1-haoxiang_li2024@163.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 44bb09f0ca637ef11525dd37377cda5f49c72e57 Author: Mikulas Patocka Date: Thu Jul 9 21:36:01 2026 +0200 dm-verity: increase sprintf buffer size commit 88dd117c92a142253fb7a17e791773902b3babc6 upstream. The prefix "DM_VERITY_ERR_BLOCK_NR" is 22 chars. Add '=', one digit for type, ',', up to 20 digits for a u64 block number, and a NUL terminator: that's 46 bytes. The buffer is 42 bytes. For block numbers >= 16 decimal digits (devices larger than ~16 EB with 4K blocks), snprintf silently truncates the uevent environment variable. Signed-off-by: Mikulas Patocka Assisted-by: Claude:claude-opus-4.6 Fixes: 65ff5b7ddf05 ("dm verity: add error handling modes for corrupted blocks") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 72c3283a2abd60ecef295e02270f22ef1dfccd25 Author: Mikulas Patocka Date: Thu Jul 9 21:29:11 2026 +0200 dm_early_create: fix freeing used table on dm_resume failure commit 366665416f20527ff7cad548a32d1ddf23195740 upstream. If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case. Signed-off-by: Mikulas Patocka Assisted-by: Claude:claude-opus-4.6 Fixes: 6bbc923dfcf5 ("dm: add support to directly boot to a mapped device") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 532cf62ffd6816daa407bc9a5e58569bd3fa9ea4 Author: Mikulas Patocka Date: Fri Jul 10 18:35:49 2026 +0200 dm-stats: fix merge accounting commit 1917eb2db750ecbdf710f79a8042eaa545a063c7 upstream. There were wrong parentheses when setting stats_aux->merged, so that merging was never properly accounted. This commit fixes it. Signed-off-by: Mikulas Patocka Assisted-by: Claude:claude-opus-4-6 Fixes: fd2ed4d25270 ("dm: add statistics support") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit da0b96841fd6f91d1e5e35cb63a9951443d50945 Author: Mikulas Patocka Date: Fri Jul 10 18:37:15 2026 +0200 dm-stats: fix dm_jiffies_to_msec64 commit 386df1a57b631c456d14f857cb0c0c2e11c16bef upstream. There were wrong calculations in dm_jiffies_to_msec64 that produced incorrect output when HZ was different from 1000. This commit fixes them. Signed-off-by: Mikulas Patocka Assisted-by: Claude:claude-opus-4-6 Fixes: fd2ed4d25270 ("dm: add statistics support") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 4b0de5a3ac1fd42acb0dc1f80ac5747e3287d723 Author: Benjamin Marzinski Date: Thu Jul 2 21:43:39 2026 -0400 dm-log: fix a bitset_size overflow on 32bit machines commit 9743132a41f4d9d0e54c5f2adcb821b04796bab1 upstream. Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits. Signed-off-by: Benjamin Marzinski Signed-off-by: Mikulas Patocka Fixes: c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit fcd29e617218d4b4009745cfa24093ffc708ae94 Author: Mikulas Patocka Date: Fri Jul 10 18:32:49 2026 +0200 dm-bufio: fix wrong count calculation in dm_bufio_issue_discard commit 422f1d4f141eaa3a6e4199ceec86cc6b9bf26570 upstream. block_to_sector converts a block number to a sector number and adds c->start to the result. It is inappropriate to use this function for converting the number of blocks to a number to sectors because c->start would be incorrectly added to the result. Luckily, the only target that uses dm_bufio_issue_discard is dm-ebs, which sets c->start to 0, so this bug is latent. Signed-off-by: Mikulas Patocka Assisted-by: Claude:claude-opus-4-6 Fixes: 6fbeb0048e6b ("dm bufio: implement discard") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit e3ffa8e492e5cdee62d916ee3e9244ccce2b73c5 Author: Samuel Moelius Date: Thu Jul 2 00:27:35 2026 +0000 dm era: fix out-of-bounds memory access for non-zero start sector commit a868196f03c2b19418ae3d2b69e195d668a271e5 upstream. dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number. Assisted-by: Codex:gpt-5.5-cyber-preview Signed-off-by: Samuel Moelius Reviewed-by: Ming-Hung Tsai Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Fixes: eec40579d848 ("dm: add era target") Signed-off-by: Greg Kroah-Hartman commit abf2fae92cbe68945028987d498cc72f8f0e23a8 Author: Ming-Hung Tsai Date: Tue Jun 30 20:17:44 2026 +0800 dm thin metadata: fix metadata snapshot consistency on commit failure commit 5bcd4d3058ebaf46ad2e163829d87dd4870c7a45 upstream. __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup message tpool 0 "reserve_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 2, but space map contains 1. Bad reference count for metadata block 7. Expected 2, but space map contains 1. Bad reference count for metadata block 13. Expected 1, but space map contains 0. Reproducer 2: __release_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 16th block inaccessible, to trigger metadata commit failure in the subsequent release_metadata_snap operation. The 16th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 128 linear /dev/sdc 0 128 3968 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Reserve then release the metadata snapshot, to trigger metadata commit failure and transaction abort. The held_root gets removed from the on-disk superblock, causing inconsistent metadata. dmsetup message tpool 0 "reserve_metadata_snap" dmsetup message tpool 0 "release_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 1, but space map contains 2. Bad reference count for metadata block 7. Expected 1, but space map contains 2. 1 metadata blocks have leaked. Fix by deferring the held_root update to commit time. Additionally, move the existing-snapshot check in __reserve_metadata_snap before the shadow operation to avoid unnecessary work. In __release_metadata_snap, clear pmd->held_root before btree deletion so partial failure leaks blocks rather than leaving a stale reference, and unlock the snapshot block before decrementing its refcount. Fixes: 991d9fa02da0 ("dm: add thin provisioning target") Cc: stable@vger.kernel.org Signed-off-by: Ming-Hung Tsai Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 72adb90e7acff62662c392bf775719f762378eae Author: Genjian Zhang Date: Sat Jul 11 18:05:26 2026 +0800 dm thin metadata: fix superblock refcount leak on snapshot shadow failure commit 4b22d0801fadfcae2e106e6ba32e49439c7c7ebf upstream. __reserve_metadata_snap() increments THIN_SUPERBLOCK_LOCATION in the metadata space map before shadowing it. When dm_tm_shadow_block() fails, a reference is leaked in the metadata space map. Fix by adding the missing dm_sm_dec_block(). Signed-off-by: Genjian Zhang Signed-off-by: Mikulas Patocka Fixes: cc8394d86f04 ("dm thin: provide userspace access to pool metadata") Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit fbc65b17508ed5464b7106e7fa5f15251ca1b603 Author: Haoxiang Li Date: Tue Jun 23 19:57:14 2026 +0800 net: sparx5: unregister blocking notifier on init failure commit 483be61b4a9a6df3b7cb277e8f189e082dee4cb8 upstream. sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there. Fixes: d6fce5141929 ("net: sparx5: add switching support") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260623115714.2192074-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8e1c7257c81577130f5ce90f69b2a2c3ce63f957 Author: Oliver Hartkopp Date: Tue Jul 14 18:55:27 2026 +0200 can: bcm: add missing rcu list annotations and operations commit 7b2c3eabc4dafc062a25e10711154f2107526a78 upstream. sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). Reported-by: sashiko-reviews@lists.linux.dev Closes: https://lore.kernel.org/linux-can/20260610094654.A1FFE1F00893@smtp.kernel.org/ Fixes: dac5e6249159 ("can: bcm: add missing rcu read protection for procfs content") Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-5-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit ffa80a2af27c97453861a5128e537214a31cd18a Author: Oliver Hartkopp Date: Tue Jul 14 18:55:24 2026 +0200 can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure commit d9b091d9d22fee81ec53fb55d2032951993ceadb upstream. bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: Ginger Closes: https://lore.kernel.org/linux-can/CAGp+u1aBK8QVjsvAxM2Ldzep4rEbsP9x_pV3At4g=h1kVEtyhA@mail.gmail.com/ Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260714-bcm_fixes-v15-2-562f7e3e42da@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 59672aa4bcd8d32172c1ff6a179583981d6acabc Author: Oliver Hartkopp Date: Sun Jul 12 19:59:41 2026 +0200 can: isotp: use unconditional synchronize_rcu() in isotp_release() commit 9b1a02e0d980ac6b0e36a90378f847062f81d7e4 upstream. isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path. Fixes: 14a4696bc311 ("can: isotp: isotp_release(): omit unintended hrtimer restart on socket release") Closes: https://lore.kernel.org/linux-can/20260707085210.6B6C01F000E9@smtp.kernel.org/ Reported-by: Nico Yip Signed-off-by: Oliver Hartkopp Link: https://patch.msgid.link/20260712-isotp-fixes-v10-1-793a1b1ce17f@hartkopp.net Cc: stable@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit bf8bcc1c137d54a62a428b00051fdbb13660673b Author: Bryam Vargas Date: Thu Jun 4 19:36:54 2026 +0000 nvmet-rdma: handle inline data with a nonzero offset commit 48c0162f647bb47e6084ffbc71b8f213f5e2f4f8 upstream. nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). Fixes: 0d5ee2b2ab4f ("nvmet-rdma: support max(16KB, PAGE_SIZE) inline data") Cc: stable@vger.kernel.org Suggested-by: Keith Busch Reported-by: Bryam Vargas Signed-off-by: Bryam Vargas Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 861f884f5471632c731cbbd612a1c072e391a624 Author: Weiming Shi Date: Fri Jul 3 20:35:46 2026 -0700 sctp: validate STALE_COOKIE cause length before reading staleness commit 1cd23ca80784223fa2204e16203f754da4e821f8 upstream. When an ERROR chunk with a STALE_COOKIE cause is received in the COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure of Staleness that follows the cause header: err = (struct sctp_errhdr *)(chunk->skb->data); stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err))); err is the first cause in the chunk, not the STALE_COOKIE cause that caused the dispatch, and nothing guarantees the staleness field is present. sctp_walk_errors() only requires a cause to be as long as the 4-byte header, so for a STALE_COOKIE cause of length 4 the read runs past the cause, and for a minimal ERROR chunk past skb->tail. The value is echoed to the peer in the Cookie Preservative of the reply INIT, leaking uninitialized memory. sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so check its length there and pass it to sctp_sf_do_5_2_6_stale(), which reads that cause instead of the first one. A STALE_COOKIE cause too short to hold the staleness field is discarded. The read is reachable by any peer that can drive an association into COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket in a user and network namespace. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Xiang Mei Assisted-by: Claude:claude-opus-4-8 Cc: stable@vger.kernel.org Signed-off-by: Weiming Shi Acked-by: Xin Long Link: https://patch.msgid.link/20260704033545.2438373-2-bestswngs@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 82a5746c4c9e94f6f816ec7edea6ddc24417c6a5 Author: Kunihiko Hayashi Date: Tue Jun 16 10:12:23 2026 +0900 spi: uniphier: Fix completion initialization order before devm_request_irq() commit f3ad1c87d8201e54b66bd6072442f0b5d5a308ee upstream. The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. Reported-by: Sangyun Kim Reported-by: Kyungwook Boo Fixes: 5ba155a4d4cc ("spi: add SPI controller driver for UniPhier SoC") Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Signed-off-by: Kunihiko Hayashi Reviewed-by: Masami Hiramatsu (Google) Link: https://patch.msgid.link/20260616011223.201357-1-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 088eefb1d3389304d80c80335335b85c1f7ba372 Author: Wang Yan Date: Mon Jun 22 18:33:48 2026 +0800 time: Fix off-by-one in compat settimeofday() usec validation commit 269f2b43fae692d1f3988c9f888a6301aa537b82 upstream. The compat version of settimeofday() uses '>' instead of '>=' when validating tv_usec against USEC_PER_SEC, allowing the value 1000000 to pass the check. After the subsequent conversion to nanoseconds (tv_nsec *= NSEC_PER_USEC), this results in tv_nsec == NSEC_PER_SEC, which violates the timespec invariant that tv_nsec must be strictly less than NSEC_PER_SEC. The native settimeofday() was already fixed in commit ce4abda5e126 ("time: Fix off-by-one in settimeofday() usec validation"), but the compat counterpart was missed. Fix it by using '>=' to reject tv_usec values outside the valid range [0, USEC_PER_SEC - 1]. Fixes: 5e0fb1b57bea ("y2038: time: avoid timespec usage in settimeofday()") Signed-off-by: Wang Yan Signed-off-by: Thomas Gleixner Acked-by: Arnd Bergmann Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260622103348.120255-1-wangyan01@kylinos.cn Signed-off-by: Greg Kroah-Hartman commit 232dcf908eb7eb9d8046a9597975caf44270966e Author: Jaewon Yang Date: Mon Jul 13 02:11:47 2026 +0900 tpm: Make the TPM character devices non-seekable commit f20d61c22bcaf172d6790b6500e3838e532e71c8 upstream. The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. Fixes: 9488585b21be ("tpm: add support for partial reads") Link: https://lore.kernel.org/all/20260710090217.191289-1-yong010301@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Jaewon Yang Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 7375dde8a397fcd43209e918b76880c17f0611e9 Author: Thorsten Blum Date: Mon Jun 15 15:02:05 2026 +0300 tpm: fix event_size output in tpm1_binary_bios_measurements_show commit 1a58f6115bfb34eabcc7de8a3a9745b219179781 upstream. Commit 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") split the output to write the endian-converted event header first and then the variable-length event data. However, the split was at sizeof(struct tcpa_event) - 1, even though event_data was a zero-length array, and later a flexible array member, both of which already excluded the event data. Therefore, the current code writes the first three bytes of event_size from the endian-converted header and then the last byte from the raw header, which can emit a corrupted event_size on PPC64, where do_endian_conversion() maps to be32_to_cpu(). Split one byte later to write the full endian-converted header first, followed by the variable-length event->event_data. Fixes: 186d124f07da ("tpm_eventlog.c: fix binary_bios_measurements") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Thorsten Blum Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit bdfd1c21d90e628a58a9de79e024cdfcbedfa15c Author: Maoyi Xie Date: Fri Jun 12 16:59:41 2026 +0800 xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink commit 095515d89b19b6cc19dfcdc846f97403ed1ebce3 upstream. xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. Reported-by: Xiao Liang Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/ Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612085941.3158249-8-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2a2e5f7393b260944b18c019a9715da749114038 Author: Sanman Pradhan Date: Sun Jun 7 16:47:34 2026 +0000 xfrm: use compat translator only for u64 alignment mismatch commit 355fbcbdc2539cca7890b0d0914d4ce0f985ad74 upstream. The XFRM compat layer (CONFIG_XFRM_USER_COMPAT) translates 32-bit xfrm netlink and setsockopt messages into the native 64-bit layout. It is only needed on architectures where the 32-bit and 64-bit ABIs disagree on u64 alignment, which the kernel encodes as COMPAT_FOR_U64_ALIGNMENT. That symbol is defined only by arch/x86. XFRM_USER_COMPAT depends on it, so the translator can never be built on any other architecture, including arm64, which still provides a 32-bit compat ABI (CONFIG_COMPAT) for AArch32 EL0 userspace. On arm64 the AArch32 EABI already aligns u64 to 8 bytes, identical to the AArch64 ABI, so no translation is required and the native code path is correct for 32-bit tasks. However, xfrm_user_rcv_msg() and xfrm_user_policy() gate on in_compat_syscall() alone and then call xfrm_get_translator(), which returns NULL when no translator is registered. On arm64 that is always the case, so every xfrm netlink message and the XFRM_POLICY setsockopt issued by a 32-bit task returns -EOPNOTSUPP. A 32-bit userspace process on arm64 (and on any other arch with CONFIG_COMPAT but without COMPAT_FOR_U64_ALIGNMENT) therefore cannot configure XFRM state or policy through the XFRM_USER netlink API, and cannot use the XFRM_POLICY setsockopt path, because both fail before reaching the native parser. The translator series replaced the blanket compat rejection with a translator lookup. That made the path usable on x86 when the translator is available, but left architectures that cannot build the translator permanently rejected even when their compat layout already matches the native layout. Let those architectures use the native parser instead. Gate the translator requirement on COMPAT_FOR_U64_ALIGNMENT instead of on in_compat_syscall() alone. Gating on the ABI property rather than on CONFIG_XFRM_USER_COMPAT is deliberate: on x86 with IA32_EMULATION=y but XFRM_USER_COMPAT=n, a 32-bit task must still be rejected rather than routed through the native parser, which would misread genuinely 4-byte-aligned x86-32 messages. COMPAT_FOR_U64_ALIGNMENT is the ABI property that makes the XFRM translator mandatory. Only the receive/input direction needs the guard. The send, dump and notification paths already call the translator as "if (xtr) { ... }" with no error on NULL, so on arches without a translator they no-op and the kernel emits native 64-bit-layout messages, which is what an AArch32 task expects. Tested on Juniper SRX hardware: with the fix, 32-bit IPsec userspace netlink and XFRM_POLICY setsockopt operations that previously failed with -EOPNOTSUPP now succeed; x86 behaviour is unchanged by inspection. Fixes: 5106f4a8acff ("xfrm/compat: Add 32=>64-bit messages translator") Fixes: 96392ee5a13b ("xfrm/compat: Translate 32-bit user_policy from sockptr") Cc: stable@vger.kernel.org Signed-off-by: Sanman Pradhan Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 1dd9cb98fe228e017fff9efb33862ff38c741b65 Author: Wentao Liang Date: Mon Jun 22 19:25:41 2026 +0800 xen/gntdev: fix error handling in ioctl commit 45ca1afe2fd14c04e37227e79d3f8455831d8408 upstream. When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by holding the mutex across gntdev_add_map(), retrieving the correct index, and copy_to_user(). If copy_to_user() fails, remove the mapping from the list and release the reference while still holding the lock. Cc: stable@vger.kernel.org Fix these issues by properly handling all error cases. Fixes: 1401c00e59ea ("xen/gntdev: convert priv->lock to a mutex") Fixes: 68b025c813c2 ("xen-gntdev: Add reference counting to maps") Signed-off-by: Wentao Liang Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Message-ID: <20260622112541.38194-1-vulab@iscas.ac.cn> Signed-off-by: Greg Kroah-Hartman commit c4d9b6a0c9645366d9e4af8a6ac8347bd4c841aa Author: Xuanqiang Luo Date: Tue Jul 14 23:08:08 2026 +0800 i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() commit 71356737a7a55c76fee847563e3d33f8e6dc6b6d upstream. If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res. Fixes: b5b5b32081cd ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC") Signed-off-by: Xuanqiang Luo Cc: # v5.10+ Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260714150808.85045-1-xuanqiang.luo@linux.dev Signed-off-by: Greg Kroah-Hartman commit 6d17f3ed6fcf7215ffd1ae5a6f4b65a64e268786 Author: Roman Vivchar Date: Thu Jul 9 16:31:29 2026 +0300 i2c: mediatek: fix WRRD for SoCs without auto_restart option commit deb35336b5bfed5db9231b5348bc1514db930797 upstream. MediaTek mt65xx family SoCs have no auto restart, however, they still support the WRRD mode in the hardware. Because auto_restart is set to 0, the WRRD mode will be never enabled, leading to read errors. Fix this by removing auto_restart check from the WRRD enable path. Fixes: b49218365280 ("i2c: mediatek: fix potential incorrect use of I2C_MASTER_WRRD") Signed-off-by: Roman Vivchar Cc: # v6.18+ Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260709-6572-6595-i2c-v2-1-b2fb8510d1d3@protonmail.com Signed-off-by: Greg Kroah-Hartman commit 18f580d1b70dced4aea9b45a734726b389b78cbb Author: Joshua Crofts Date: Mon Jun 29 21:17:40 2026 +0200 hwmon: (ltc2992) add missing 'select REGMAP_I2C' to Kconfig commit a35a6f1b20100057c66b7be5a8f6864661c3945c upstream. The Kconfig entry for the LTC2992 sensor doesn't contain a `select REGMAP_I2C` parameter, causing build failures if regmap isn't selected previously during the build process. Fixes: b0bd407e94b0 ("hwmon: (ltc2992) Add support") Cc: stable@vger.kernel.org Signed-off-by: Joshua Crofts Link: https://lore.kernel.org/r/20260629-add-kconfig-deps-v1-2-8104df929b1a@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 1c48dc6a0c1ef47a9fa24611e60bc2f4ee4dd0df Author: Bhargav Joshi Date: Sat Jun 20 17:39:16 2026 +0530 irqchip/crossbar: Use correct index in crossbar_domain_free() commit 043db005a8d6932dc7d217c86307e9af0bc10ddc upstream. crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data. Fixes: 783d31863fb82 ("irqchip: crossbar: Convert dra7 crossbar to stacked domains") Signed-off-by: Bhargav Joshi Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260620-irq-crossbar-fix-v2-1-b8e8499f468a@gmail.com Signed-off-by: Greg Kroah-Hartman commit c60a627edbbd66bfbb0a0f564e64084c23c7ce98 Author: Florian Fuchs Date: Mon May 18 13:45:21 2026 +0200 mtd: maps: vmu-flash: fix NULL pointer dereference in initialization commit 357e3b8e3a8769ba36eb8ec5e053e4825f1a9329 upstream. The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference. Fixes: 47a72688fae7 ("mtd: flash mapping support for Dreamcast VMU.") Cc: stable@vger.kernel.org Signed-off-by: Florian Fuchs Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit ed0f938f946f16b772e99cb8c277ab57828e5be4 Author: Michael Bommarito Date: Tue May 19 07:04:04 2026 -0400 ocfs2: reject non-inline dinodes with i_size and zero i_clusters commit 7ebc672fab7a76e1e47e0f2fc1ee48118d27fde4 upstream. On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing storage before advancing i_size, and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches i_size_read(inode). A forged directory dinode with a huge i_size and no clusters would repeatedly fail on holes while advancing through the claimed size. Sparse regular files remain exempt: on sparse-alloc volumes, truncate can legitimately grow i_size without allocating clusters. System inodes and inline-data dinodes also retain their separate storage rules. Mirror the check in ocfs2_filecheck_validate_inode_block() as well. filecheck reports through its own error namespace, so malformed size/cluster state is logged as a filecheck invalid-inode result rather than via ocfs2_error(), but it must not proceed into ocfs2_populate_inode(). Link: https://lore.kernel.org/20260519110404.1803902-4-michael.bommarito@gmail.com Fixes: b657c95c1108 ("ocfs2: Wrap inode block reads in a dedicated function.") Signed-off-by: Michael Bommarito Link: https://sashiko.dev/#/patchset/20260517111015.3187935-1-michael.bommarito%40gmail.com Assisted-by: Claude:claude-opus-4-7 Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 4f2e3949a3dcee9d4207fff9abe5958f396e1516 Author: Michael Bommarito Date: Tue May 19 07:04:03 2026 -0400 ocfs2: reject dinodes whose i_rdev disagrees with the file type commit 51407c2d249987a466416890a5c931a2354a46aa upstream. id1.dev1.i_rdev is the device-number arm of the ocfs2_dinode id1 union. It is only meaningful for character and block device inodes. For any other user-visible file type the on-disk value must be zero. ocfs2_populate_inode() currently copies id1.dev1.i_rdev into inode->i_rdev before the S_IFMT switch decides whether the inode is a special file. A non-device inode with a non-zero i_rdev can therefore publish stale or attacker-controlled device state into the in-core inode. System inodes legitimately use other arms of the same union, so keep the cross-check restricted to non-system inodes. Factor that predicate into a helper and use it in both the normal validator and online filecheck path; filecheck reports the malformed dinode through OCFS2_FILECHECK_ERR_INVALIDINO instead of ocfs2_error(). Link: https://lore.kernel.org/20260519110404.1803902-3-michael.bommarito@gmail.com Fixes: b657c95c1108 ("ocfs2: Wrap inode block reads in a dedicated function.") Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Heming Zhao Cc: Joel Becker Cc: Jun Piao Cc: Junxiao Bi Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit fb024ea29f6cb1f01745e5f2e31646f3acb9aa6f Author: Michael Bommarito Date: Tue May 19 07:04:02 2026 -0400 ocfs2: reject dinodes with non-canonical i_mode type commit 5366a017099c6a3c443be908a05f26fd72af12a1 upstream. Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). Link: https://lore.kernel.org/20260519110404.1803902-1-michael.bommarito@gmail.com Link: https://lore.kernel.org/20260519110404.1803902-2-michael.bommarito@gmail.com Fixes: b657c95c1108 ("ocfs2: Wrap inode block reads in a dedicated function.") Signed-off-by: Michael Bommarito Link: https://sashiko.dev/#/patchset/20260517111015.3187935-1-michael.bommarito%40gmail.com Assisted-by: Claude:claude-opus-4-7 Reviewed-by: Joseph Qi Cc: Changwei Ge Cc: Heming Zhao Cc: Joel Becker Cc: Jun Piao Cc: Junxiao Bi Cc: Mark Fasheh Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 942b818b396c24c452681803ff291552317d2ef1 Author: Ian Bridges Date: Thu Jun 11 09:46:38 2026 -0500 ocfs2: fix NULL h_transaction deref in ocfs2_assure_trans_credits commit f9ab30c96b0f00c20c6dac93681bdae3a033d229 upstream. [BUG] A direct write over unwritten extents can panic the kernel in ocfs2_assure_trans_credits() when the journal aborts during DIO completion. The crash is a general protection fault from a NULL pointer dereference. [CAUSE] ocfs2_dio_end_io_write() loops over a direct write's unwritten extents, marking each written under a single journal handle. If the journal aborts (for example after an I/O error) while the extent tree is being updated, the handle is left aborted with its transaction pointer cleared. The extent merge treats that failure as not critical and reports success, so the loop keeps using the handle. ocfs2_assure_trans_credits() reads the handle's remaining credits without first checking whether the handle is aborted, and that read dereferences the cleared transaction pointer. [FIX] A journal abort is recorded in the handle itself, so callers are expected to test the handle rather than rely on a returned error. Make ocfs2_assure_trans_credits() do that, as the other ocfs2 journal helpers already do, and return -EROFS when the handle is aborted. Link: https://lore.kernel.org/airKTsM1fRVN-Wj7@dev Fixes: be346c1a6eeb ("ocfs2: fix DIO failure due to insufficient transaction credits") Signed-off-by: Ian Bridges Reported-by: syzbot+e9c15ff790cea6a0cfae@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e9c15ff790cea6a0cfae Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 35486b291b8fbde6c4d0b1c79e565c6260d3329d Author: Kyle Zeng Date: Thu Jun 11 14:35:10 2026 -0700 ocfs2: avoid moving extents to occupied clusters commit 22920541c35a9f23f219038ba5874c843a7c4419 upstream. For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and expects ocfs2_probe_alloc_group() to replace it with a free run in the target block group. The probe currently leaves *phys_cpos unchanged if the scan reaches the end of the group without finding a free run. An occupied goal at the last bit can therefore survive the probe and be passed to __ocfs2_move_extent(), which copies file data into a cluster still owned by another inode before the bitmap is updated. When the probe does find a free run, it also subtracts move_len from the ending bit. The start of an N-bit run ending at i is i - N + 1, so the current calculation can report the bit immediately before the free run. Clear *phys_cpos before scanning and use the correct free-run start. Callers already treat a zero result as -ENOSPC, so failed probes no longer continue with an occupied caller-controlled goal. Link: https://lore.kernel.org/20260611213510.16956-1-kylebot@openai.com Fixes: e6b5859cccfa ("Ocfs2/move_extents: helper to probe a proper region to move in an alloc group.") Fixes: 236b9254f8d1 ("ocfs2: fix non-auto defrag path not working issue") Assisted-by: Codex:gpt-5.5 Signed-off-by: Kyle Zeng Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit c2a131fb6882c98aada739479cc96df8748d0c24 Author: Arseniy Krasnov Date: Tue May 5 11:30:30 2026 +0300 mtd: rawnand: fix condition in 'nand_select_target()' commit 8507c2cc9e4fa402401819f44d1e8a5ef4d11d8b upstream. 'cs' here must be in range [0:nanddev_ntargets[. Cc: stable@vger.kernel.org Fixes: 32813e288414 ("mtd: rawnand: Get rid of chip->numchips") Signed-off-by: Arseniy Krasnov Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 378481cc60a937ef8ea4ef6e4f95f0dbc4e21414 Author: Vasiliy Kovalev Date: Wed Apr 15 18:52:37 2026 +0300 net/9p: fix infinite loop in p9_client_rpc on fatal signal commit 6b4f48728faa8bb514368f7eacda05565dea8696 upstream. When p9_client_rpc() is called with type P9_TFLUSH and the transport has no peer (e.g. fd transport backed by pipes with no 9p server), a fatal signal causes an infinite loop: again: err = io_wait_event_killable(req->wq, ...) /* SIGKILL wakes the task, returns -ERESTARTSYS */ if (err == -ERESTARTSYS && c->status == Connected && type == P9_TFLUSH) { sigpending = 1; clear_thread_flag(TIF_SIGPENDING); goto again; } clear_thread_flag() clears TIF_SIGPENDING before jumping back to io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING, finds it zero, and the task goes to sleep again. The task can only wake on the next signal delivery that calls signal_wake_up() and sets TIF_SIGPENDING again. When that happens the loop repeats, clears TIF_SIGPENDING, and sleeps again indefinitely. This is triggered in practice by coredump_wait(): when a thread in a multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall User Dispatch), coredump_wait() sends SIGKILL to all other threads and waits for them to call mm_release(). If one of those threads is blocked in p9_client_rpc() over an fd transport with no peer, it enters the P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls forever: INFO: task syz.0.18:676 blocked for more than 143 seconds. Not tainted 6.12.77+ #1 task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004 Call Trace: context_switch kernel/sched/core.c:5344 [inline] __schedule+0xcb4/0x5d50 kernel/sched/core.c:6724 __schedule_loop kernel/sched/core.c:6801 [inline] schedule+0xe5/0x350 kernel/sched/core.c:6816 schedule_timeout+0x253/0x290 kernel/time/timer.c:2593 do_wait_for_common kernel/sched/completion.c:95 [inline] __wait_for_common+0x409/0x600 kernel/sched/completion.c:116 wait_for_common kernel/sched/completion.c:127 [inline] wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264 coredump_wait fs/coredump.c:448 [inline] do_coredump+0x854/0x4350 fs/coredump.c:629 get_signal+0x1425/0x2730 kernel/signal.c:2903 arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218 do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so fatal_signal_pending() works correctly. If a fatal signal is pending, jump to recalc_sigpending to restore TIF_SIGPENDING and return -ERESTARTSYS to the caller. The same defect is present in stable kernels back to 5.4. On those kernels the infinite loop is broken earlier by a second SIGKILL from the parent process (e.g. kill_and_wait() retrying after a timeout), resulting in a zombie process and a shutdown delay rather than a permanent D-state hang, but the underlying flaw is the same. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 91b8534fa8f5 ("9p: make rpc code common and rework flush code") Closes: https://syzkaller.appspot.com/bug?extid=3ce7863f8fc836a427e7 Cc: stable@vger.kernel.org Signed-off-by: Vasiliy Kovalev Message-ID: <20260415155237.182891-1-kovalev@altlinux.org> Signed-off-by: Dominique Martinet Signed-off-by: Greg Kroah-Hartman commit 593201a8f43864cb7e25197095f6716a589584fd Author: Bastien Curutchet Date: Tue May 26 09:10:00 2026 +0200 mtd: rawnand: pl353: fix probe resource allocation commit 19ed11aee966d91beebdef9d32ce926474872f79 upstream. During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent. Cc: stable@vger.kernel.org Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller") Signed-off-by: Bastien Curutchet Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 3221796a5282923d98cce1065e1c4a98d1bea467 Author: Tristan Madani Date: Sat Apr 18 13:10:48 2026 +0000 ocfs2: use kzalloc for quota recovery bitmap allocation commit 93c8c6ea90be9e9df8fe14048ad4e3caad0770a6 upstream. ocfs2 quota recovery allocates a bitmap buffer with kmalloc and does not fully initialize it. This can lead to use of uninitialized bits during quota recovery from a corrupted filesystem image. Use kzalloc instead to ensure the bitmap is zero-initialized. Link: https://lore.kernel.org/20260418131048.1052507-1-tristmd@gmail.com Reported-by: syzbot+7ea0b96c4ddb49fd1a70@syzkaller.appspotmail.com Signed-off-by: Tristan Madani Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit dda8286a7bf30ba778106979906c88877410c91e Author: Martin Wilck Date: Wed May 13 19:42:35 2026 +0200 scsi: smartpqi: Use shost_to_hba() in pqi_scan_finished() commit 57db1307afb1f83d45f5ff53b93f8d040100d13e upstream. shost_to_hba() is used everywhere except to obtain pqi_ctrl_info from shosti, except in pqi_scan_finished(), where shost_priv() is used. This causes one pointer dereference to be missed, as shost->hostdata is a pointer in smartpqi. Fix it. Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver") Signed-off-by: Martin Wilck Reviewed-by: Don Brace Cc: Don Brace Cc: storagedev@microchip.com Cc: stable@vger.kernel.org Reviewed-by: Hannes Reinecke Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260513174236.430465-2-mwilck@suse.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit e97415b8254d9cc131b7bb1c80fcf38123269b9a Author: Ruoyu Wang Date: Tue Jun 9 16:45:27 2026 +0800 mtd: slram: remove failed entries from the device list commit 36f1648644d769c496a8e47e53603e863e358d73 upstream. register_device() links a new slram_mtdlist entry before allocating all of the state needed by the entry. If a later allocation, memremap(), or mtd_device_register() fails, the partially initialized entry remains on the global list. A later cleanup can then dereference or free invalid state from that failed entry. Unwind the partially initialized entry and clear the list tail on each failure path after the entry has been linked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Ruoyu Wang Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 1dbcc020b7e64792798b786c634bfb6941f60c92 Author: Krzysztof Wilczyński Date: Sat Jun 13 21:10:05 2026 +0000 proc: only bump parent nlink when registering directories commit 16b02eb4b9b272c221255c20d34ccd5db53a3ed3 upstream. proc_register() increments the parent directory's link count for every entry it registers, while remove_proc_entry() and remove_proc_subtree() decrement it only when the removed entry is a directory. Regular files thus inflate the parent's count while they exist, and leak one link permanently on every create and remove cycle. For example, /proc/bus/pci/00 with twenty-two device files and no subdirectories reports nlink 24 instead of 2, and SR-IOV VF enable and disable cycles, each creating and removing the VF config space entries under /proc/bus/pci/, inflate the link count of that directory without bound. Before commit e06689bf5701 ("proc: change ->nlink under proc_subdir_lock"), the increment lived in proc_mkdir_data() and proc_create_mount_point(), and was therefore applied only to directories. Moving it into proc_register() to bring it under proc_subdir_lock dropped the S_ISDIR check. Thus, move the nlink accounting into pde_subdir_insert() and pde_erase(), only updating it for directories in both, so the link count is always changed together with the directory entry itself. Fixes: e06689bf5701 ("proc: change ->nlink under proc_subdir_lock") Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Krzysztof Wilczyński Link: https://patch.msgid.link/20260613211005.921692-1-kwilczynski@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit d20ee42f8226607b5693b2bc2f115ca2d270221a Author: Aaron Tomlin Date: Tue May 26 10:16:51 2026 -0400 mips: sched: Fix CPUMASK_OFFSTACK memory corruption commit 98e37db4a34d3af3fb2f4648295c25b5e40b20e3 upstream. This patch addresses a critical memory management flaw. When CONFIG_CPUMASK_OFFSTACK is enabled, cpumask_var_t is a pointer. Consequently, sizeof(new_mask) evaluates to the pointer size, causing copy_from_user() to clobber the mask pointer. Furthermore, the old logic performed copy_from_user() before allocating the mask. Fix this by allocating new_mask first. To handle variable-sized user masks correctly, use cpumask_size() to truncate overly large user masks or pad undersized masks with zeros before copying the data directly into the allocated buffer. Fixes: 295cbf6d63165 ("[MIPS] Move FPU affinity code into separate file.") Cc: stable@vger.kernel.org Signed-off-by: Aaron Tomlin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 93b99b63ad5657225faf702670ddfeddf1f0ae29 Author: WenTao Liang Date: Thu Jun 11 08:53:21 2026 +0800 power: supply: charger-manager: fix refcount leak in is_full_charged() commit 4373cfa38ead58f980362c841b0d0bdf8c4d956c upstream. In is_full_charged(), power_supply_get_by_name() is called to obtain a reference to the fuel_gauge power supply. If the voltage check (uV >= desc->fullbatt_uV) succeeds, the function returns true directly without releasing the reference, leaking the refcount. Fix this by setting a flag and jumping to the out label where power_supply_put() properly drops the reference. Cc: stable@vger.kernel.org Fixes: e132fc6bb89b ("power: supply: charger-manager: Make decisions focussed on battery status") Signed-off-by: WenTao Liang Link: https://patch.msgid.link/20260611005322.53096-1-vulab@iscas.ac.cn Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 1113fa5b01a47a1a4cdbb9c695197ca6215f02a8 Author: Tristan Madani Date: Sat Apr 18 13:11:18 2026 +0000 ntfs3: fix out-of-bounds read in decompress_lznt commit 7160a57192fb16d7a6fa9b7f5c7ac341d2444a89 upstream. decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access. Reported-by: syzbot+39b2fb0f2638669008ec@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit 0af83b8155cc848e9f5d2c36e20a70d024214649 Author: Michael Bommarito Date: Fri Apr 17 19:33:05 2026 -0400 ntfs3: bound to_move in indx_insert_into_root before hdr_insert_head commit 9b6926ac9c970ae0b2c2fe6289b16e9aa10b6a67 upstream. indx_insert_into_root() promotes a full resident $INDEX_ROOT into $INDEX_ALLOCATION and copies all non-last resident root entries into a newly allocated INDEX_BUFFER via hdr_insert_head(). The source byte count 'to_move' is summed from the on-disk resident entry sizes and is independent of the destination buffer size, which comes from root->index_block_size (via indx->index_bits). A crafted NTFS image that keeps a valid, full resident root but shrinks root->index_block_size down to 512 after the root has been populated makes hdr_insert_head() memcpy attacker-controlled resident entry bytes past the end of the kmalloc(1u << indx->index_bits) allocation returned by indx_new(). For a 512-byte destination and a resident root whose non-last entries total 560 bytes, the memcpy overruns by 120 bytes and a following memmove extends the highest written offset to 136 bytes past the allocation. The overflow bytes are a direct copy of on-disk entries (via kmemdup), so they are fully attacker-controlled. The write is reachable from unprivileged open(O_CREAT) on a mounted crafted NTFS image: a single sufficiently long create in a directory whose resident root is already full forces root promotion and triggers the copy. This is a controlled out-of-bounds write of 120-136 bytes past a kmalloc(index_block_size) allocation, with attacker-controlled content. It is a bounded adjacent-heap corruption primitive; it is not an arbitrary-address write. Successful exploitation into a named victim object depends on the surrounding slab layout. Reject the copy at the sink. The destination's INDEX_HDR already reports hdr_total (the payload capacity of the new buffer) and hdr_used (the bytes already consumed by the terminal END entry installed by indx_new()); require that to_move fits in the remaining payload before calling hdr_insert_head(). On mismatch, fail with -EINVAL and mark the filesystem as having a detected on-disk inconsistency, which is the same behaviour as the surrounding validation in this function. Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit 8128bec895075253c779d67afdc90ae513265fca Author: Michael Bommarito Date: Sun May 17 19:41:40 2026 -0400 ntfs3: cap RESTART_TABLE free-chain walker at rt->used commit 9611f644302c07d21bc8af97e3e06a3d30064253 upstream. A crafted NTFS3 disk image triggers an in-kernel infinite loop at mount time, hanging the mounting thread and firing the soft-lockup watchdog within ~22s on multi-CPU hosts (panic with kernel.softlockup_panic=1). The bug is reachable from desktop USB auto-mount on distributions where udisks2 routes the NTFS signature to the in-tree ntfs3 driver (Arch family and an increasing fraction of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual mount elsewhere. check_rstbl()'s second walker iterates the free-entry singly-linked list headed by rt->first_free with no upper bound on iteration count: for (off = ff; off;) { if (off == RESTART_ENTRY_ALLOCATED) return false; off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off)); if (off > ts - sizeof(__le32)) return false; } The existing guards cover three exits: end-of-list (off == 0), the in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds (off > ts - sizeof(__le32)). None of the three prevents an in-bounds cycle. A crafted on-disk RESTART_TABLE whose free chain contains a self-loop or A->B->A cycle whose offsets satisfy: - in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)] - (off - sizeof(struct RESTART_TABLE)) % rsize == 0 passes all existing guards and spins the mount-time thread forever. Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18 stores 0x18 as its next pointer; mount of the forged image with the in-tree ntfs3 driver never returns. Bound the walker by rt->used. Each entry on a legitimate free chain is unique, and the total slot count is ne = le16_to_cpu (rt->used). A traversal that visits more than ne slots is by construction malformed; reject it as a corrupt RESTART_TABLE. After this patch, mount of the forged image returns with -EINVAL and a log_replay failure message, and mkntfs-produced legitimate images mount cleanly (verified in the same UML harness). Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit b20e5a709d8bd190d6e4645606763c7423e694c1 Author: Michael Bommarito Date: Tue May 19 05:51:35 2026 -0400 fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation} commit 3e127829e57f5190f612412ece4541cb96d5ec7a upstream. In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`, where e->view.data_off comes from an on-disk NTFS_DE inside an INDEX_ROOT or INDEX_BUFFER. Neither case validates view.data_off + dlen against e->size; the existing check_if_index_root / check_if_alloc_index helpers walk the entry chain and validate the entry's offset, but not its internal view fields. The neighbouring read sites (e.g., fs/ntfs3/index.c when iterating view entries) check view.data_off + view.data_size <= e->size. Apply the same bound at the two memmove sites. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe instrumentation: with view.data_off forced to 0xFFFC, the memmove writes 32 bytes past the end of the NTFS_DE. This is similar in shape to Pavitra Jha's 2026-05-02 patch "fs/ntfs3: prevent oob in case UpdateRecordDataRoot" (<20260502105008.21827-1-jhapavitra98@gmail.com>) which proposes calling ntfs3_bad_de_range(); that helper does not exist in mainline. This patch uses inline checks. Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Cc: stable@vger.kernel.org Reported-by: Pavitra Jha Closes: https://lore.kernel.org/ntfs3/20260502105008.21827-1-jhapavitra98@gmail.com/ Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit 99031d4f63c785d2a985b6a4c64c4256f7117052 Author: Michael Bommarito Date: Mon Apr 13 09:31:17 2026 -0400 fs/ntfs3: add depth limit to indx_find_buffer to prevent stack overflow commit 1ebd684b8f627f75bc3e03f8b2ad8400fd1f02cd upstream. indx_find_buffer() recursively descends the B+ tree index with no depth limit. A crafted NTFS image with circular index node references causes unbounded recursion, overflowing the kernel stack and panicking the system. This is reachable by mounting a malicious NTFS filesystem (e.g. from a USB drive via desktop automount) and deleting a file whose index entry triggers the rebalancing fallback path in indx_delete_entry(). Add a depth parameter and bail out with -EINVAL when it reaches the fnd->nodes array bound, matching the constraint already enforced by fnd_push() in indx_find(). The related function indx_find() was previously patched for a similar infinite-loop issue (commit 1732053c8a6b), but indx_find_buffer() was missed. Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit ca343a99806b4fc8e27c48f08be3445c5fcd1445 Author: Konstantin Komarov Date: Mon Jun 1 10:57:56 2026 +0200 fs/ntfs3: validate lcns_follow in log_replay conversion commit 6a4c53a2e26a865565bd6a460961e8d6fcb32329 upstream. log_replay() converts DIR_PAGE_ENTRY_32 records into DIR_PAGE_ENTRY records when replaying version 0 restart tables. During this conversion, the memmove() length is derived directly from the on-disk lcns_follow field: memmove(&dp->vcn, &dp0->vcn_low, 2 * sizeof(u64) + le32_to_cpu(dp->lcns_follow) * sizeof(u64)); check_rstbl() validates restart table structure, but does not constrain per-entry lcns_follow values relative to the entry size. A malformed filesystem image can provide an oversized lcns_follow value, causing the conversion memmove() to access memory beyond the bounds of the allocated restart table buffer. The same field is later used to bound iteration over page_lcns[], so validating lcns_follow during conversion also prevents downstream out-of-bounds access from the same malformed metadata. Compute the maximum valid lcns_follow from the already-validated restart table entry size and reject entries that exceed this bound. Reuse the existing t16/t32 scratch variables already declared in log_replay() to avoid introducing new declarations. Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Cc: stable@vger.kernel.org Signed-off-by: Pavitra Jha [almaz.alexandrovich@paragon-software.com: fixed the conflicts] Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit ab8761676d638c5be170aaf91b7ffdd451236616 Author: Konstantin Komarov Date: Tue Jun 2 15:15:47 2026 +0200 fs/ntfs3: bound attr_off in UpdateResidentValue against data_off commit d1570c48f49a693974d000251030370ee2e83539 upstream. In do_action()'s UpdateResidentValue case (fslog.c:3307), lrh->attr_off and lrh->redo_len come from the on-disk LRH. When they satisfy aoff + dlen < attr->res.data_off, the assignment attr->res.data_size = cpu_to_le32(aoff + dlen - data_off); underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1, data_off=0x18). Subsequent code that reads attr->res.data_size to walk the resident attribute payload would then read up to 4 GiB past the 1024-byte MFT record allocation. The existing mi_enum_attr() defense in fs/ntfs3/record.c:287 catches the corrupted data_size on the next attribute walk and fails the mount, but only on the path that walks all attributes. A read site that picks an attribute by name and reads its data_size without re-validating is not covered. Validate aoff against data_off and asize at the source. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe: with aoff=0x10 and data_off=0x18, the post-assignment data_size is 0xfffffff9 (mount then fails at -22 from mi_enum_attr). Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito [almaz.alexandrovich@paragon-software.com: clang-formatted the changes] Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit c38ed2ab62fab75fd6d0fdc2bee540fbebc7b959 Author: Konstantin Komarov Date: Tue Jun 2 15:21:03 2026 +0200 fs/ntfs3: bound DeleteIndexEntryAllocation memmove length commit fc4626bb3656362de8b0ecd56605d47a19ec3518 upstream. In do_action()'s DeleteIndexEntryAllocation case, e->size comes from an on-disk INDEX_BUFFER entry. When e->size makes e + e->size point past hdr + hdr->used, PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t that is silently cast to a quasi-infinite size_t when passed to memmove(). The memmove then walks past the destination buffer. The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543 already carries the corresponding guard: if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize || Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) || used + esize > le32_to_cpu(hdr->total)) { goto dirty_vol; } Apply the same shape to the allocation-path case. Also reject esize == 0: memmove(e, e, ...) is a no-op and leaves hdr->used unchanged, hiding a malformed entry from the existing check_index_header() walk. Reproduced under UML+KASAN on mainline 8d90b09e6741 by mounting a crafted NTFS image: the unguarded memmove takes a length of 0xffffffffffffff00 and the kernel oopses in memmove+0x81/0x1a0 on the do_action+0x36a2 frame. Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito [almaz.alexandrovich@paragon-software.com: clang-formatted the changes] Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit fc247511da6be0cb5d803105fade34017ede93b6 Author: Zhan Xusheng Date: Wed May 6 15:55:54 2026 +0800 fs/ntfs3: fix syncing wrong inode on DIRSYNC cross-directory rename commit 932fa0c1496286e39e14e27194c1ee7c2181629f upstream. In ntfs3_rename(), when IS_DIRSYNC(new_dir) is true, the code syncs the renamed file inode instead of the target directory new_dir: if (IS_DIRSYNC(new_dir)) ntfs_sync_inode(inode); /* should be new_dir */ DIRSYNC requires that directory metadata changes are written to disk synchronously. Since new_dir was modified (a new directory entry was added), it is new_dir that must be synced to satisfy the guarantee, not the renamed file itself. This bug has existed since the initial ntfs3 implementation and was carried through the refactoring in commit 78ab59fee07f ("fs/ntfs3: Rework file operations"). Fix by syncing new_dir instead of inode. Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation") Cc: stable@vger.kernel.org Signed-off-by: Zhan Xusheng Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit 3394757c5d3970ab36d2aafa6dd40952b43f0d16 Author: Maciej W. Rozycki Date: Wed May 6 23:42:23 2026 +0100 MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() commit 5ff79e8bdc75db51e30298a75939e2308e7658e0 upstream. In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on 64-bit data) and control goes astray. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap, or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started, and the kernel will hang at: pid_max: default: 32768 minimum: 301 or somewhat later, but always before: cblist_init_generic: Setting adjustable number of callback queues. has been printed. It seems that only the prom_printf() entry point is affected. Of all the other entry points wired only rex_slot_address() and rex_gettcinfo() are called from a kernel thread other than the initial one, specifically kernel_init(), and they are leaf functions that do no business with the stack, having worked with no issue ever since 64-bit support was added for the platform back in 2002. To address this issue then, arrange for the stack to be switched in the o32 wrapper as required for prom_printf() only, by supplying call_o32() with a pointer to a chunk of initdata space, which is placed in the CKSEG0 32-bit compatibility segment, observing that prom_printf() is only called from console output handler and therefore with the console lock held, implying no need for this code to be reentrant. Other firmware entry points may be called with interrupts enabled and no lock held, and may therefore require that call_o32() be reentrant. They trigger no issue at this point and "if it ain't broke, don't fix it," so just leave them alone. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 53b6f3593d9dd14e10054a0b6611bc248a8524be Author: Johan Hovold Date: Fri Apr 24 12:28:47 2026 +0200 MIPS: ip22-gio: fix device reference leak in probe commit b82930a4c5dbc5c4df39c0f93d968c239f2c6885 upstream. The gio probe function needlessly takes a device reference which is never released and therefore prevents unbound gio devices from being freed. Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28") Cc: stable@vger.kernel.org # 3.3 Cc: Thomas Bogendoerfer Signed-off-by: Johan Hovold Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 77b614016d3c432e638e45ac39b5a837d9dcca4a Author: Johan Hovold Date: Fri Apr 24 12:28:45 2026 +0200 MIPS: ip22-gio: fix kfree() of static object commit c62cdd3e919bdf84c37ec46810f87cdb1736e822 upstream. The gio bus root device is a statically allocated object which must not be freed by kfree() on failure to register the device or bus. Fixes: 82242d28ff8b ("MIPS: IP22: Add missing put_device call") Cc: stable@vger.kernel.org # 3.17 Cc: Levente Kurusa Signed-off-by: Johan Hovold Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 9e74ea47697d3e203f9d84c1b636e6e6b9ac120e Author: Johan Hovold Date: Fri Apr 24 12:28:46 2026 +0200 MIPS: ip22-gio: fix gio device memory leak commit 7de9a1b45f5a95b58145653c525c8fb80292d9ab upstream. The gio device release callback was never wired up so gio devices are not freed when the last reference is dropped. Fixes: e84de0c61905 ("MIPS: GIO bus support for SGI IP22/28") Cc: stable@vger.kernel.org # 3.3 Cc: Thomas Bogendoerfer Signed-off-by: Johan Hovold Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit fe3b45b56b6c3d4b6b341de27fa291005287a21c Author: Chuck Lever Date: Thu May 14 16:56:06 2026 -0400 lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure commit 70a38f87bed7f0694fd07988b47b2db1e10d8df3 upstream. The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman commit d7c677feb3aa1f42b1026d75a8ea61338b51e4fb Author: Chuck Lever Date: Thu May 14 16:56:04 2026 -0400 lockd: Plug nlm_file leak when nlm_do_fopen() fails commit f16a1513452edb532fec81e591c64c320866719c upstream. A client can repeatedly drive nlm_do_fopen() failures by presenting file handles that the underlying export rejects. After kzalloc_obj() succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps to out_unlock, which releases nlm_file_mutex and returns without freeing the allocation, so each failure leaks one nlm_file. Route the failure through out_free so kfree() runs before the function returns. Fixes: 7f024fcd5c97 ("Keep read and write fds with each nlm_file") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman commit eeb95774bc79268e2b78ebf01d8781560b5bd671 Author: Abdun Nihaal Date: Tue May 19 11:20:12 2026 +0530 nvdimm/btt: Free arena sub-allocations on discover_arenas() error path commit 13fe4cd9ddd0aacb7777812328be525a11ea3fea upstream. Memory allocated by btt_freelist_init(), btt_rtt_init(), and btt_maplocks_init() is not freed on some discover_arenas() error paths. This leaks memory when arena discovery fails. Add the missing kfree() calls to release the allocations before returning an error. [ as: commit message and log edits ] Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Reviewed-by: Alison Schofield Link: https://patch.msgid.link/20260519-nvdimmleaks-v1-1-592300fb7a43@cse.iitm.ac.in Signed-off-by: Alison Schofield Signed-off-by: Greg Kroah-Hartman commit 68c967e105d50f885e02b0dbdc9211fd5f84bdcd Author: Abdun Nihaal Date: Tue May 19 11:20:13 2026 +0530 nvdimm/btt: Free arenas on btt_init() error paths commit 1a6b6442a982d0ca5fb6a1a39b6f6dfd760eda57 upstream. The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] Fixes: 5212e11fde4d ("nd_btt: atomic sector updates") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Reviewed-by: Alison Schofield Link: https://patch.msgid.link/20260519-nvdimmleaks-v1-2-592300fb7a43@cse.iitm.ac.in Signed-off-by: Alison Schofield Signed-off-by: Greg Kroah-Hartman commit e144ad0250f77e23e28949587b8b57e40dc3b512 Author: Junrui Luo Date: Wed May 13 17:28:40 2026 +0800 jbd2: fix integer underflow in jbd2_journal_initialize_fast_commit() commit 289a2ca0c9b7eae74f93fc213b0b971669b8683d upstream. jbd2_journal_initialize_fast_commit() validates journal capacity by checking (journal->j_last - num_fc_blks < JBD2_MIN_JOURNAL_BLOCKS). Both j_last and num_fc_blks are unsigned, so when num_fc_blks exceeds j_last the subtraction wraps to a large value, bypassing the bounds check. The resulting underflow corrupts j_last, j_fc_first, and j_free, leading to journal abort. Fix by checking num_fc_blks against j_last before the subtraction, returning -EFSCORRUPTED. Fixes: 6866d7b3f2bb ("ext4 / jbd2: add fast commit initialization") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Fixes: e029c5f27987 ("ext4: make num of fast commit blocks configurable") Reviewed-by: Baokun Li Fixes: e029c5f279872 ("ext4: make num of fast commit blocks configurable") Reviewed-by: Zhang Yi Reviewed-by: Jan Kara Link: https://patch.msgid.link/SYBPR01MB7881663C927DE9D7BBF4D1DFAF062@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 50aae396dc30377bec8e3b181b8346f8fd38f7d8 Author: Pauli Virtanen Date: Sat Apr 18 18:41:12 2026 +0300 Bluetooth: SCO: hold sk properly in sco_conn_ready commit 4e37f6452d586b95c346a9abdd2fb80b67794f39 upstream. sk deref in sco_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk and parent sk is currently accessed without either, and without checking parent->sk_state: [Task 1] [Task 2] sco_sock_release sco_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) sco_sock_kill(sk) UAF on sk deref and similarly for access to sco_get_sock_listen() return value. Fix possible UAF by holding sk refcount in sco_conn_ready() and making sco_get_sock_listen() increase refcount. Also recheck after lock_sock that the socket is still valid. Adjust conn->sk locking so it's protected also by lock_sock() of the associated socket if any. Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 48a5798d5ea87bb09821a34ac7dffc54cf553ce1 Author: Pauli Virtanen Date: Sun Apr 12 21:47:42 2026 +0300 Bluetooth: SCO: fix sleeping under spinlock in sco_conn_ready commit b819db93d73f4593636299e229914052b89e3ef2 upstream. sco_conn_ready calls sleeping functions under conn->lock spinlock. The critical section can be reduced: conn->hcon is modified only with hdev->lock held. It is guaranteed to be held in sco_conn_ready, so conn->lock is not needed to guard it. Move taking conn->lock after lock_sock(parent). This also follows the lock ordering lock_sock() > conn->lock elsewhere in the file. Fixes: 27c24fda62b60 ("Bluetooth: switch to lock_sock in SCO") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 936a1fd4c91f07b7bbafa4a48a6d6add5e0b09ef Author: Bartosz Golaszewski Date: Thu May 21 10:36:24 2026 +0200 mfd: tps6586x: Fix OF node refcount commit 3001ed2b4e06da2276c42ace6551617065a5b1f9 upstream. Platform devices created with platform_device_alloc() call platform_device_release() when the last reference to the device's kobject is dropped. This function calls of_node_put() unconditionally. This works fine for devices created with platform_device_register_full() but users of the split approach (platform_device_alloc() + platform_device_add()) must bump the reference of the of_node they assign manually. Add the missing call to of_node_get(). Cc: stable@vger.kernel.org Fixes: 62f6b0879304 ("tps6586x: Add device tree support") Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260521-pdev-fwnode-ref-v1-1-88c324a1b8d2@oss.qualcomm.com Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit d6ff4764ff784ede25f5c83a6f5883a74c93a5ea Author: Sven Eckelmann Date: Fri Jul 3 22:27:13 2026 +0200 batman-adv: tt: prevent TVLV OOB check overflow commit 7a581d9aaba8c82bd6177fa36b2588eea77f6e2b upstream. A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements. Cc: stable@vger.kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit c1b28432fd6345e0d2308f39c507ed5750c265d2 Author: Sven Eckelmann Date: Fri Jul 3 21:04:03 2026 +0200 batman-adv: frag: fix primary_if leak on failed linearization commit 353d2c1d5492e53ae34f490a84494124dc3d3531 upstream. If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if. Cc: stable@vger.kernel.org Reported-by: Sashiko Fixes: a063f2fba3fa ("batman-adv: Don't skb_split skbuffs with frag_list") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 04ccbed8179e7d4d0906d00939300ddc5b48ce7e Author: Sven Eckelmann Date: Fri Jul 3 20:28:31 2026 +0200 batman-adv: frag: free unfragmentable packet commit 6b628425aed49a1c7a4ffc997583840fc582d32b upstream. The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function. Cc: stable@vger.kernel.org Fixes: ee75ed88879a ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit df8b8e3832833770c4748ee816bb50578f4729a9 Author: Sven Eckelmann Date: Thu Jul 2 20:45:24 2026 +0200 batman-adv: fix VLAN priority offset commit fdb3be00ba4dafa313e699d6b5b90d13f22f3f25 upstream. The batadv_skb_set_priority() receives an SKB with the inner ethernet header at position "offset". When it tries to extract the IPv4 and IPv6 header, it needs to skip the ethernet header to get access to the IP header. But for VLAN header, it performs the access with the struct vlan_ethhdr. This struct contains both both the ethernet header and the VLAN header. It is therefore incorrect to skip over the whole vlan_ethhdr size to get access to the vlan_ethhdr. Cc: stable@vger.kernel.org Fixes: c54f38c9aa22 ("batman-adv: set skb priority according to content") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 21c44a6895f41df811d1c91d10eea194dda2b345 Author: Sven Eckelmann Date: Thu Jul 2 21:06:23 2026 +0200 batman-adv: tt: avoid request storms during pending request commit 27c7d40008231ae4140d35501b60087a9de2d2c3 upstream. batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. Cc: stable@vger.kernel.org Fixes: 335fbe0f5d25 ("batman-adv: tvlv - convert tt query packet to use tvlv unicast packets") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 451ad573fbdaf8283d7a97676eab62d8a528d66b Author: Sven Eckelmann Date: Thu Jul 2 19:32:40 2026 +0200 batman-adv: dat: fix tie-break for candidate selection commit 98052bdaf6ac1639a63ffc10244eeeab1f62ed2b upstream. The original version of the candidate selection for DAT attempted to compare both candidate and max_orig_node to identify which has the smaller MAC address. This comparison is required as tie-break when a hash collision happened. But the used function returned 0 when the function was not equal and a non-zero value when it was equal. As result, the actually selected node was dependent on the order of entries in the orig_hash and not actually on the mac addresses. The last originator in the hash collision would always win. To have a proper ordering, it must diff the actual MAC address bytes and reject the candidate when the diff is not smaller than 0. Cc: stable@vger.kernel.org Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 6d3ea37074bb747f745d28138f87745ba9bd97c5 Author: Sven Eckelmann Date: Sun Jun 28 10:37:07 2026 +0200 batman-adv: dat: ensure accessible eth_hdr proto field commit 26560c4a03dc4d607331600c187f59ab2df5f341 upstream. When batadv_get_vid() accesses the proto field of the ethernet header, it is not checking if the data itself is accessible. The caller is responsible for it. But in contrast to other call sites, batadv_dat_get_vid() and its caller didn't make sure this is true. This could have caused an out-of-bounds access. Cc: stable@vger.kernel.org Reported-by: Sashiko Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit a9ab19fbca86b32e9a9ae9e1a63e70a7eab3400f Author: Sven Eckelmann Date: Sun Jun 28 08:45:41 2026 +0200 batman-adv: bla: reacquire gw address after skb realloc commit cdf3b5af2bc4431e58629e8ad2086b1e9185c761 upstream. The pskb_may_pull() called by batadv_bla_is_backbone_gw() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. Cc: stable@vger.kernel.org Fixes: 9e794b6bf4a2 ("batman-adv: drop unicast packets from other backbone gw") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 86aa79b43e5b561fd3648891165bd7313b541315 Author: Sven Eckelmann Date: Sun Jun 28 08:45:41 2026 +0200 batman-adv: dat: acquire ARP hw source only after skb realloc commit 48067b2ae4504500a7093d9e1e16b42e70330480 upstream. The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. Cc: stable@vger.kernel.org Fixes: b61ec31c8575 ("batman-adv: Snoop DHCPACKs for DAT") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 9c2c05629e46c1fd43931506d41c56a885a98eb4 Author: Sven Eckelmann Date: Sun Jun 28 08:35:35 2026 +0200 batman-adv: access unicast_ttvn skb->data only after skb realloc commit 7141990add3f75436f2933cb310654cad3b1e3e9 upstream. The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the ethernet header but missed for the unicast_packet pointer. Cc: stable@vger.kernel.org Reported-by: Sashiko Fixes: c018ad3de61a ("batman-adv: add the VLAN ID attribute to the TT entry") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 6c37f1166549c999ccd164b0cb6462d1ae68f8f6 Author: Sven Eckelmann Date: Sun Jun 28 08:45:41 2026 +0200 batman-adv: gw: acquire ethernet header only after skb realloc commit 77880a3be88d378d60cc1e8f8ec70430e2ed0518 upstream. The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. Cc: stable@vger.kernel.org Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit b6c0e07d665fa9b18a3e8c27e93e89e6e2a84f98 Author: Thorsten Blum Date: Sun Jun 21 19:00:10 2026 +0200 x86/boot: Reject too long acpi_rsdp= values commit d130041a7b96f79cd4c7079a6c2431a6db4c9619 upstream. cmdline_find_option() returns the full length of the parsed acpi_rsdp= value. get_cmdline_acpi_rsdp() then silently truncates values which do not fit in the val[] buffer. Prevent boot_kstrtoul() from parsing a truncated value and then the kernel from silently using the wrong RSDP address, see discussion in Link:. Issue a warning so that the user is aware that s/he supplied a malformed value and can get feedback instead of silent crashes. [ bp: Make commit message more precise. ] Fixes: 3c98e71b42a7 ("x86/boot: Add "acpi_rsdp=" early parsing") Signed-off-by: Thorsten Blum Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260617130417.36651-4-thorsten.blum@linux.dev Signed-off-by: Greg Kroah-Hartman commit 24fbed0a2a45f5f379ef2b53bd2abe58be1142ad Author: Thorsten Blum Date: Mon Jul 13 21:49:25 2026 +0200 x86/boot: Validate console=uart8250 baud rate to fix early boot hang commit ffa0aa5b625fe0bed7463ac613f8b06676ff4542 upstream. When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang. Fixes: ce0aa5dd20e4 ("x86, setup: Make the setup code also accept console=uart8250") Signed-off-by: Thorsten Blum Signed-off-by: Ingo Molnar Cc: "H. Peter Anvin" Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260713194924.126472-3-thorsten.blum@linux.dev Signed-off-by: Greg Kroah-Hartman commit e2dac91380a10e9e8d5883fb73ce9d9b390a629c Author: Guangshuo Li Date: Thu Apr 16 00:26:27 2026 +0800 mfd: sm501: Fix reference leak on failed device registration commit 8c2f0b42fc252e1bf1c7746447091a468e784ca1 upstream. When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fixes: b6d6454fdb66f ("[PATCH] mfd: SM501 core driver") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260415162627.3558789-1-lgs201920130244@gmail.com Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 5bb89e23729f3a59592d699a437bb001f24b8f67 Author: Armin Wolf Date: Mon May 25 01:55:53 2026 +0200 leds: uleds: Fix potential buffer overread commit c19fe864f667afc49d1391d764e20b66555bcf7a upstream. The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. Cc: stable@vger.kernel.org Fixes: e381322b0190 ("leds: Introduce userspace LED class driver") Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20260524235553.189134-1-W_Armin@gmx.de Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 2d783a0b482fb8962f24fa982e33752fb7670e16 Author: Wang Jun <1742789905@qq.com> Date: Fri Mar 27 08:12:25 2026 +0800 soc: fsl: qe: panic on ioremap() failure in qe_reset() commit a0fe29d20e7822182e12324905af5115c1b3aed3 upstream. When ioremap() fails in qe_reset(), the global pointer qe_immr remains NULL, leading to a subsequent NULL pointer dereference when the pointer is accessed. Since this happens early in the boot process, a failure to map a few bytes of I/O memory indicates a fatal error from which the system cannot recover. Follow the same pattern as qe_sdma_init() and panic immediately when ioremap() fails. This avoids a silent NULL pointer dereference later and makes the error explicit. Fixes: 986585385131 ("[POWERPC] Add QUICC Engine (QE) infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Wang Jun <1742789905@qq.com> Link: https://lore.kernel.org/r/tencent_FED49CF5331CC0C7910618883332A08E2606@qq.com [chleroy: Rearranged change to reduce churn] Signed-off-by: Christophe Leroy (CS GROUP) Signed-off-by: Greg Kroah-Hartman commit c4eea0731998319b57dd0cd055089c888fd5e82a Author: Siddharth Vadapalli Date: Fri May 1 18:10:54 2026 +0530 soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy commit b920352cfd2b0fcd1249ff006618c939b64fc8f7 upstream. k3_ringacc_ring_pop_tail_io() and k3_ringacc_ring_pop_tail_proxy() incorrectly use K3_RINGACC_ACCESS_MODE_POP_HEAD instead of K3_RINGACC_ACCESS_MODE_POP_TAIL. This will result in ring elements being popped in the reverse order of that which the caller expects. Fix this. Fixes: 3277e8aa2504 ("soc: ti: k3: add navss ringacc driver") Cc: stable@vger.kernel.org Signed-off-by: Siddharth Vadapalli Reviewed-by: Hari Prasath Gujulan Elango Link: https://patch.msgid.link/20260501124129.362192-1-s-vadapalli@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Greg Kroah-Hartman commit 4ee41361c637eafa80f5d88b46d0016e6cdb24db Author: Guangshuo Li Date: Mon Apr 13 22:15:26 2026 +0800 gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path commit e75717f9aec04355777be41070890c6a815c76df upstream. After device_initialize(), the embedded struct device in struct host1x_device should be released through the device core with put_device(). In host1x_device_add(), if host1x_device_parse_dt() fails, the current error path frees the object directly with kfree(device). That bypasses the normal device lifetime handling and leaks the reference held on the embedded struct device. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device() in the host1x_device_parse_dt() failure path. Fixes: f4c5cf88fbd50 ("gpu: host1x: Provide a proper struct bus_type") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Acked-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20260413141526.2961841-1-lgs201920130244@gmail.com Signed-off-by: Greg Kroah-Hartman commit 2731efa6364e47934c96eb69e01ea131e8af8030 Author: Xiang Mei (Microsoft) Date: Wed Jul 8 18:11:50 2026 +0000 netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment() commit 86f3ce81dd2b4b0aa2c3016c989a943e4b1b643d upstream. br_ip6_fragment() gets prevhdr, a pointer into the skb head, from ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb skb_checksum_help() reallocates the head via pskb_expand_head(), leaving prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a use-after-free write. Save prevhdr's offset before skb_checksum_help() and recompute it after, like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6 fragment"). BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857) Write of size 1 at addr ffff888013ff5016 by task exploit/141 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip6_frag_next (net/ipv6/ip6_output.c:857) br_ip6_fragment (net/ipv6/netfilter.c:212) nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407) nf_hook_slow (net/netfilter/core.c:619) br_forward_finish (net/bridge/br_forward.c:66) __br_forward (net/bridge/br_forward.c:115) maybe_deliver (net/bridge/br_forward.c:191) br_flood (net/bridge/br_forward.c:245) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:442) ... packet_sendmsg (net/packet/af_packet.c:3114) ... do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception in interrupt Fixes: 764dd163ac92 ("netfilter: nf_conntrack_bridge: add support for IPv6") Cc: stable@vger.kernel.org Reported-by: AutonomousCodeSecurity@microsoft.com Signed-off-by: Xiang Mei (Microsoft) Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 0afc9ad987c0faa80ab5f8d6e7815085ac8dbb82 Author: Wyatt Feng Date: Sat Jun 13 18:27:15 2026 +0800 netfilter: xt_nat: reject unsupported target families commit 5d1a2240935ea47e2673d0ea17fdb058e4dc91dd upstream. xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"), so this patch is no longer critical. Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra family check is a good idea in any case. ] Fixes: c7232c9979cb ("netfilter: add protocol independent NAT core") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 78b5d6dbc860776161f9e9206b06ff8a01f531ab Author: Yizhou Zhao Date: Wed Jul 8 13:27:28 2026 +0800 netfilter: nf_conncount: fix zone comparison in tuple dedup commit f62c41b4910e65da396ec9a8c40c1fe7fe82e449 upstream. The "already exists" dedup logic in __nf_conncount_add() decides whether a connection has already been counted and can be skipped instead of incrementing the connlimit count. It compares the conntrack zone of a list entry with the zone of the connection being added using nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or zone->dir as the direction argument. Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0 and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask: NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction shifts the meaning of every non-zero value. An ORIG-only zone passes 1 and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and test bits beyond the valid direction range. In those cases nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using the real zone id, so different zones can be treated as equal and dedup collapses to tuple equality alone. nf_conncount stores and compares the original-direction tuple for a connection. If an skb already has an attached conntrack entry, get_ct_or_tuple_from_skb() explicitly copies ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's ctinfo. Therefore the zone comparison in the tuple dedup path must use IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a zone id applies, not which direction this conncount tuple represents. Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly. Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional zone contains the ORIG bit, so it naturally returns the real zone id; reply-only zones continue to fall back for original-direction tuple comparisons. Fixes: 21ba8847f857 ("netfilter: nf_conncount: Fix garbage collection with zones") Fixes: b36e4523d4d5 ("netfilter: nf_conncount: fix garbage collection confirm race") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: Claude-Code:GLM-5.2 Signed-off-by: Yizhou Zhao Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 2a95ec21824a8ad81ad660b12231456fc0ac9830 Author: Xiang Mei Date: Sun Jul 5 16:36:29 2026 -0700 netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag commit 3b08fed5b7e0d5e3a25d73ef3ba09cd33ade16c9 upstream. nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Cc: stable@vger.kernel.org Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit dc11f26685aa850f237226f0f463647aea58ab7c Author: Florian Westphal Date: Wed Jul 1 07:44:17 2026 +0200 netfilter: nf_nat_sip: reload possible stale data pointer commit 77e43bcb7ec177e293a5c3f1b91a2c5aebfb6c68 upstream. quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream. Fixes: 7266507d8999 ("netfilter: nf_ct_sip: support Cisco 7941/7945 IP phones") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit d5f9d050b0b267227c1f02f11021872c7768a9cc Author: Wyatt Feng Date: Thu Jun 11 15:21:42 2026 +0800 netfilter: xt_cluster: reject template conntracks in hash match commit 5feba91006ec92da57acc1cc2e34df623b98541e upstream. xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully initialized conntrack and passes it to xt_cluster_hash(). This causes a state confusion bug when the raw table CT target attaches a template conntrack to skb->_nfct before normal conntrack processing. Templates carry IPS_TEMPLATE status but do not have a valid tuple for hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the zeroed l3num field. Reject template conntracks before hashing them. This matches existing netfilter handling for template objects and avoids hashing incomplete conntrack state. Fixes: 0269ea493734 ("netfilter: xtables: add cluster match") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 32a8f17078994108bf9f5620f32e1ee4639cd2fd Author: David Carlier Date: Sat Apr 11 19:57:21 2026 +0100 netfilter: nfnl_cthelper: apply per-class values when updating policies commit d738feccb98cb224ebabecb703e98f5008276bff upstream. When a userspace conntrack helper with multiple expectation classes is updated via nfnetlink, every class ends up with the first class's max_expected and timeout values. nfnl_cthelper_update_policy_all() validates each new policy into the corresponding slot of the temporary new_policy array, but the second loop that commits the values into the live helper dereferences new_policy as a pointer instead of indexing it, so every iteration reads new_policy[0] regardless of i. An update that changes per-class values is silently collapsed onto class 0's values with no error returned to userspace. Index the temporary array by i in the commit loop so each class gets its own validated values. Fixes: 2c422257550f ("netfilter: nfnl_cthelper: fix runtime expectation policy updates") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 437e0a3854b3a44ec15afa9ab88ec215adf3a2fd Author: Muhammad Bilal Date: Tue May 19 17:23:28 2026 -0400 netfilter: nf_conntrack_irc: fix parse_dcc() off-by-one OOB read commit ef6400ca25a13fd6dedbe8ef4a1d0979bbbfe88a upstream. parse_dcc() treats data_end as an inclusive end pointer, but its only caller passes data_limit = ib_ptr + datalen, which points one past the last valid byte. The newline search loop iterates while tmp <= data_end, so when no newline is present, *tmp is read at tmp == data_end, one byte beyond the region filled by skb_header_pointer(). irc_buffer is kmalloc'd as MAX_SEARCH_SIZE + 1 bytes and datalen is capped at MAX_SEARCH_SIZE, so the stray read does not fault. The byte is uninitialized or stale; if it contains an ASCII digit, simple_strtoul will consume it and produce a wrong DCC IP or port in the conntrack expectation. The extra allocation byte is also a fragile guard: if the cap or allocation size changes, this becomes a real out-of-bounds read. Change the loop and its post-loop check to use strict less-than, consistent with the caller's exclusive-end convention. Update the function comment accordingly. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 089d149ccd7c3ac3d5e14ac65e558dcd9ec27583 Author: Abdun Nihaal Date: Thu May 14 13:54:39 2026 +0530 fbdev: tridentfb: fix potential memory leak in trident_pci_probe() commit 7a35ec619d9af8ee128320975c1252b8ad65f1e8 upstream. In trident_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist(). Fixes: 6a5e3bd0c8bc ("tridentfb: Add DDC support") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 2515cd60f6b5ad680ed164aa6bd19b05270af34c Author: Abdun Nihaal Date: Thu May 14 13:54:36 2026 +0530 fbdev: nvidia: fix potential memory leak in nvidiafb_probe() commit 85f5e38c162bdf9dbbe197275d416402712f3707 upstream. In nvidiafb_probe(), the memory allocated for modelist in nvidia_set_fbinfo() is not freed in the subsequent error paths. Fix that by calling fb_destroy_modelist(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 6069044e74b7510bf2f034ccd049bc962fb9c765 Author: Abdun Nihaal Date: Thu May 14 13:54:34 2026 +0530 fbdev: carminefb: fix potential memory leak in alloc_carmine_fb() commit 6fcca16a2b19c37f60693c56cbc0c923364ff3ef upstream. The memory allocated for modelist in fb_videomode_to_modelist() is not freed in the subsequent error path. Fix that by calling fb_destroy_modelist() Fixes: 2ece5f43b041 ("fbdev: add the carmine FB driver") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 2199d70efc5bea0e9b4462a4f9e4c3d3c21c5d34 Author: Abdun Nihaal Date: Thu May 14 13:54:38 2026 +0530 fbdev: tdfxfb: fix potential memory leak in tdfxfb_probe() commit bb019d755366cc3e777a12d4bf457ff289837370 upstream. In tdfxfb_probe(), the memory allocated for modelist using fb_videomode_to_modelist() when CONFIG_FB_3DFX_I2C is defined, is not freed in the subsequent error paths. Fix that by calling fb_destroy_modelist(). Fixes: 215059d2421f ("tdfxfb: make use of DDC information about connected monitor") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 61d46d6f5dc163aa5f3548633b5f392b021620ff Author: Abdun Nihaal Date: Thu May 14 13:54:40 2026 +0530 fbdev: uvesafb: fix potential memory leak in uvesafb_probe() commit 033e56fed09047ee63072e9f58789f40c1c7079d upstream. Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label. Fixes: 8bdb3a2d7df4 ("uvesafb: the driver core") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit ef6c5e4607483259a0daf6584e9e34ef643a655d Author: Abdun Nihaal Date: Thu May 14 13:54:37 2026 +0530 fbdev: s3fb: fix potential memory leak in s3_pci_probe() commit 3b0ed04bc852887a9164e1bbf521652e8ef3eb92 upstream. In s3_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist() Fixes: 86c0f043a737 ("s3fb: add DDC support") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit ccf073cd4a2f783adc40b04db3805dbddaaf9f31 Author: Abdun Nihaal Date: Thu May 14 13:54:35 2026 +0530 fbdev: i740fb: fix potential memory leak in i740fb_probe() commit 5936063409af230a2c88b8700c47b89a19fd70b5 upstream. In i740fb_probe(), the memory allocated in fb_videomode_to_modelist() for modelist is not freed in the error paths. Fix that by calling fb_destroy_modelist(). Fixes: 5350c65f4f15 ("Resurrect Intel740 driver: i740fb") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 30a2ff955b66b16d4c98dc61f4fe8b3a57c6f7bb Author: Abdun Nihaal Date: Thu May 14 13:54:33 2026 +0530 fbdev: radeon: fix potential memory leak in radeonfb_pci_register() commit df8c1101c9a08859da612b5d0a08d55d475522c6 upstream. The function radeonfb_pci_register() allocates memory for modelist (by calling radeon_check_modes() which calls fb_add_videomode()). The memory is appended to info->modelist, but is not freed in subsequent error paths. Fix this by calling fb_destroy_modelist(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit f7394a6af6a0b7d1d5948a1b333483e2986eca59 Author: Li RongQing Date: Thu May 14 21:02:02 2026 -0400 fbdev: sm712: Fix operator precedence in big_swap macro commit 5dbe5b65df0b0c0ec77492427c274b7b5011890e upstream. The big_swap(p) macro was intended to swap bytes within 16-bit halves of a 32-bit value. However, because the bitwise shift operators (<<, >>) have higher precedence than the bitwise AND operator (&), the original code failed to perform any shifting on the masked bits. For example, 'p & 0xff00ff00 >> 8' was evaluated as 'p & (0xff00ff00 >> 8)', effectively neutralizing the intended swap. Fix this by adding parentheses to ensure the bitwise AND is performed before the shift, correctly implementing the byte swap logic. Fixes: 1461d66728648 ("staging: sm7xxfb: merge sm712fb with fbdev") Cc: stable@vger.kernel.org Signed-off-by: Li RongQing Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 3eb2bc1009c2476426ffbaf642d7ac82f4685b4d Author: Abdun Nihaal Date: Thu May 14 13:54:30 2026 +0530 fbdev: hecubafb: fix potential memory leak in hecubafb_probe() commit cbef2a305a8a72969b86f96b7c07b86edde61aff upstream. The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Reviewed-by: Thomas Zimmermann Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit edc5a845108337d0c167ab850fe9adfaea442975 Author: Abdun Nihaal Date: Thu May 14 13:54:31 2026 +0530 fbdev: broadsheetfb: fix potential memory leak in broadsheetfb_probe() commit 9d18a4e4234fd3ee0d0eed8ccbbb50cb76b2232c upstream. The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Reviewed-by: Thomas Zimmermann Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 77e26383083c59a67244fcf2e70eecd354451906 Author: Abdun Nihaal Date: Thu May 14 13:54:32 2026 +0530 fbdev: metronomefb: fix potential memory leak in metronomefb_probe() commit 894632b862a39b3fe1cb5de06fbae86225ea64de upstream. The memory allocated for pagerefs in fb_deferred_io_init() is not freed on the error path. Fix it by calling fb_deferred_io_cleanup(). Fixes: 56c134f7f1b5 ("fbdev: Track deferred-I/O pages in pageref struct") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Reviewed-by: Thomas Zimmermann Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit cb3efe1a354f1638726725c3ecee1ce8d1a7e2dc Author: Hyunwoo Kim Date: Fri Jun 5 05:59:15 2026 +0900 KVM: arm64: vgic: Check the interrupt is still ours before migrating it commit 0074b82cdfcb5fd13710a0ac308ade68ac6f6fbe upstream. vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it. Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Signed-off-by: Hyunwoo Kim Link: https://patch.msgid.link/aiHnI1mu6SGQrgnz@v4bel Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 625f9cc659cf4e16c2be6e4323cc9a06051c8ebc Author: Nickolay Goppen Date: Wed Apr 29 12:30:11 2026 +0300 arm64: dts: qcom: sdm630: describe adsp_mem region properly commit ce414263e9ebe5080381a50cbdf9065c29816202 upstream. Downstream [1] this region is marked as shared, reusable and dynamic so describe it that way. [1]: https://github.com/xiaomi-sdm660/android_kernel_xiaomi_sdm660/blob/11-EAS/arch/arm/boot/dts/qcom/sdm660.dtsi#L448 Fixes: b190fb010664 ("arm64: dts: qcom: sdm630: Add sdm630 dts file") Cc: stable@vger.kernel.org Reviewed-by: Ekansh Gupta Reviewed-by: Dmitry Baryshkov Signed-off-by: Nickolay Goppen Link: https://lore.kernel.org/r/20260429-qcom-sdm660-cdsp-adsp-fastrpc-dts-fix-v5-4-16bc82e622ad@mainlining.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman commit be272e159dfe1207b67332ad6e17adcf59b4ea4b Author: Yong Wang Date: Thu Jun 11 02:37:43 2026 +0800 net: ife: require ETH_HLEN to be pullable in ife_decode() commit 9406f6012b7343661efb516a11c62d4db2b62f75 upstream. ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. Fixes: ef6980b6becb ("introduce IFE action") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Xin Liu Signed-off-by: Yong Wang Signed-off-by: Ren Wei Link: https://patch.msgid.link/20260610183814.1648888-2-n05ec@lzu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 2b3e241729e87afed13ac0f666472d5d6ca42e87 Author: Zhengchuan Liang Date: Tue Jun 9 16:34:37 2026 +0800 net: atm: reject out-of-range traffic classes in QoS validation commit cdf19f380e46192e7084be559638aab1f6ed86a2 upstream. Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Xin Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Reviewed-by: Simon Horman Link: https://patch.msgid.link/58f02c6f73d9818fd5d2022e1116759fdde6116b.1780965530.git.zcliangcn@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b609f7f46916c6b05585ca82455077198a23770f Author: Michael Bommarito Date: Thu Jun 11 08:54:55 2026 -0400 net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() commit 20054869770c7df060c5ecee3e8bbf9029c47191 upstream. qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. Fixes: ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260611125455.2352279-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c83ad3dfa6d9953d5ce6839416bf5a1bfc50285a Author: Zhang Tianci Date: Thu Feb 26 19:55:50 2026 +0800 vduse: Fix race in vduse_dev_msg_sync and vduse_dev_read_iter commit ae9c13b6fd79087cc5a216ee1649b6f012c2a238 upstream. There is one race case in vduse_dev_msg_sync and vduse_dev_read_iter: vduse_dev_read_iter(): lock(msg_lock); dequeue_msg(send_list); unlock(msg_lock); vduse_dev_msg_sync(): wait_timeout() finish lock(msg_lock); check msg->complete is false list_del(msg); <- double list_del() crash! To fix this case, we shall ensure vduse_msg is on send_list or recv_list outside the msg_lock critical section. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Cc: stable@vger.kernel.org Signed-off-by: Zhang Tianci Reviewed-by: Xie Yongji Acked-by: Jason Wang Acked-by: Eugenio Pérez Acked-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin Message-ID: <20260226115550.1814-3-zhangtianci.1997@bytedance.com> Signed-off-by: Greg Kroah-Hartman commit 7203ac71d3895fa5948b319dd724f0e1cffbc4a1 Author: Wentao Liang Date: Tue Jun 9 08:47:30 2026 +0000 mlxsw: fix refcount leak in mlxsw_sp_vrs_lpm_tree_replace() commit 21cf8dc478a49e8de039c2739b1646a774cb1944 upstream. When mlxsw_sp_vrs_lpm_tree_replace() fails after replacing some VRs, the error rollback loop does not correctly revert the preceding replacements. The loop decrements the index but fails to update the vr pointer, which still points to the VR that caused the failure. As a result, the condition and the rollback call always operate on the same VR, potentially calling mlxsw_sp_vr_lpm_tree_replace() multiple times on it while never rolling back the earlier VRs. Those VRs continue to hold a reference to new_tree acquired via mlxsw_sp_lpm_tree_hold(), leaking the reference count of new_tree. Fix by reinitializing vr inside the error loop with the updated index: vr = &mlxsw_sp->router->vrs[i]; so that the loop correctly iterates over all VRs that were actually replaced. Cc: stable@vger.kernel.org Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Wentao Liang Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260609084730.215732-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit dbd126539c098dba3159ce7d34b10b2daddcbd0f Author: Guangshuo Li Date: Wed Jul 8 20:35:20 2026 +0800 smb: client: fix overflow in passthrough ioctl bounds check [ Upstream commit a4f27ad055392fa164f5649e89a3637b033c5fcc ] smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. Fixes: 2b1116bbe898 ("CIFS: Use common error handling code in smb2_ioctl_query_info()") Signed-off-by: Guangshuo Li Signed-off-by: Steve French Signed-off-by: Sasha Levin commit b47abb1dfb2c66cd60a871e1fb526347e946946a Author: Li RongQing Date: Fri Jul 3 22:14:23 2026 +0800 net/mlx5: Fix L3 tunnel entropy refcount leak [ Upstream commit c914307e1d41c2cb7bcdcbfde4cd2f214f6aa027 ] mlx5_tun_entropy_refcount_inc() counts both VXLAN and L2-to-L3 tunnel reformat entries as entropy-enabling users. The matching decrement path only handled VXLAN, leaving L2-to-L3 tunnel entries counted after release. Handle MLX5_REFORMAT_TYPE_L2_TO_L3_TUNNEL in mlx5_tun_entropy_refcount_dec() as well so the enabling entry refcount remains balanced. Fixes: f828ca6a2fb6 ("net/mlx5e: Add support for hw encapsulation of MPLS over UDP") Signed-off-by: Li RongQing Reviewed-by: Simon Horman Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20260703141423.1723-1-lirongqing@baidu.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 8e39aa63798ea0a797fd9341419f12ef91df3238 Author: Timur Tabi Date: Wed Jul 8 18:57:22 2026 -0500 regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK [ Upstream commit d38f8bd771c4999b797d7074b348cf201414bd34 ] Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. Fixes: cba6cfdc7c3f ("regulator: core: Avoid lockdep reports when resolving supplies") Signed-off-by: Timur Tabi Link: https://patch.msgid.link/20260708235722.2953579-1-ttabi@nvidia.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit c413f4e79bc92695899f863ada0d0214361c0ed7 Author: Douglas Anderson Date: Thu Apr 13 17:34:17 2023 -0700 regulator: core: Make regulator_lock_two() logic easier to follow [ Upstream commit 37473397b852f556d8b9428ccbfd51886037842d ] The regulator_lock_two() function could be made clearer in the case of lock contention by having a local variable for each of the held and contended locks. Let's do that. At the same time, let's use the swap() function instead of open coding it. This change is expected to be a no-op and simply improves code clarity. Suggested-by: Stephen Boyd Link: https://lore.kernel.org/r/CAE-0n53Eb1BeDPmjBycXUaQAF4ppiAM6UDWje_jiB9GAmR8MMw@mail.gmail.com Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20230413173359.1.I1ae92b25689bd6579952e6d458b79f5f8054a0c9@changeid Signed-off-by: Mark Brown Stable-dep-of: d38f8bd771c4 ("regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK") Signed-off-by: Sasha Levin commit bd5a80128bdfc93b1cae935a70da000b8c483e6e Author: Cao Guanghui Date: Wed Jun 17 14:00:52 2026 +0800 dm era: fix NULL pointer dereference in metadata_open() [ Upstream commit 9ae672606c17891d90b282e3490b817620549599 ] metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. Fixes: eec40579d848 ("dm: add era target") Signed-off-by: Cao Guanghui Reviewed-by: Su Yue Reviewed-by: Ming-Hung Tsai Signed-off-by: Mikulas Patocka Signed-off-by: Sasha Levin commit dac813101914c21219ac221a60a31a11bc90e7ec Author: Julian Anastasov Date: Tue Jul 7 21:25:46 2026 +0300 ipvs: ensure inner headers in ICMP errors are in headroom [ Upstream commit 3f7a535ff0fa627a0132803e4c2f903ceffcbc1c ] Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. Fixes: f2edb9f7706d ("ipvs: implement passive PMTUD for IPIP packets") Link: https://sashiko.dev/#/patchset/20260702073430.67680-1-zhaoyz24%40mails.tsinghua.edu.cn Signed-off-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 1c3b6970bd160a15715b3f3c4c3c5be8f658eb48 Author: Yizhou Zhao Date: Thu Jul 2 15:34:28 2026 +0800 ipvs: fix PMTU for GUE/GRE tunnel ICMP errors [ Upstream commit 6b335af0d0d1ff44ac579d106953bf19299e5233 ] When an ICMP Fragmentation Needed error is received for a tunneled IPVS connection, ip_vs_in_icmp() recomputes the MTU that the original packet can use by subtracting the tunnel overhead from the reported next-hop MTU. The current code always subtracts sizeof(struct iphdr), which is only the IPIP overhead. For GUE and GRE tunnels, ipvs_udp_decap() and ipvs_gre_decap() already compute the additional tunnel header length, but that value is scoped to the decapsulation block and is lost before the ICMP_FRAG_NEEDED handling. As a result, the ICMP error sent back to the client advertises an MTU that is too large, so PMTUD can fail to converge for GUE/GRE-tunneled real servers. With a reported next-hop MTU of 1400, a GUE tunnel currently returns 1380 to the client. The correct value is 1368: 1400 - sizeof(struct iphdr) - sizeof(struct udphdr) - sizeof(struct guehdr) Hoist the tunnel header length into the main ip_vs_in_icmp() scope and subtract sizeof(struct iphdr) + ulen in the Fragmentation Needed path. The IPIP path keeps ulen as 0, so its existing 1400 - 20 = 1380 result is unchanged. Fixes: 508f744c0de3 ("ipvs: strip udp tunnel headers from icmp errors") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: Claude-Code:GLM-5.2 Signed-off-by: Yizhou Zhao Acked-by: Julian Anastasov Signed-off-by: Florian Westphal Stable-dep-of: 3f7a535ff0fa ("ipvs: ensure inner headers in ICMP errors are in headroom") Signed-off-by: Sasha Levin commit 816efb7fc0aeae986e63ac73b428dd97a4ef69f5 Author: Yizhou Zhao Date: Mon Jul 6 18:16:23 2026 +0800 ipvs: use parsed transport offset in TCP state lookup [ Upstream commit 2500fa3958b1ba51c2b065e39db1b04dfa7e23a2 ] TCP state handling reparses the skb to find the TCP header. For IPv6 it uses sizeof(struct ipv6hdr), while the surrounding IPVS code already parsed the packet with ip_vs_fill_iph_skb() and has the real transport-header offset in iph.len. This makes TCP state handling look at the wrong bytes when an IPv6 packet carries extension headers. Use the parsed transport offset passed down from ip_vs_set_state() when reading the TCP header. For IPv4 and for IPv6 packets without extension headers, the passed offset matches the previous value. Fixes: 0bbdd42b7efa6 ("IPVS: Extend protocol DNAT/SNAT and state handlers") Link: https://lore.kernel.org/netdev/20260705125659.37744-1-zhaoyz24@mails.tsinghua.edu.cn/ Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: Claude Code:GLM-5.2 Signed-off-by: Yizhou Zhao Acked-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit b5a751d16924e0dee2c6cf68ff308a9034fb3217 Author: Yizhou Zhao Date: Mon Jul 6 18:16:22 2026 +0800 ipvs: pass parsed transport offset to state handlers [ Upstream commit bae7ce7bafb59e42dc0e0e2999fdd9d1cffe3866 ] IPVS callers already parse the packet into struct ip_vs_iphdr before updating connection state. For IPv6 this records the real transport-header offset after extension headers in iph.len. Pass this parsed transport offset through ip_vs_set_state() and the protocol state_transition() callback so protocol handlers can use the same packet context as scheduling and NAT handling. This patch only changes the common callback plumbing and adapts the protocol callback signatures; TCP and SCTP start using the value in follow-up patches. Signed-off-by: Yizhou Zhao Acked-by: Julian Anastasov Signed-off-by: Florian Westphal Stable-dep-of: 2500fa3958b1 ("ipvs: use parsed transport offset in TCP state lookup") Signed-off-by: Sasha Levin commit 0401d6cf7877c9be36652385dfcbf7f891b8b590 Author: Eric Dumazet Date: Sun Jul 5 18:17:55 2026 +0000 ipv6: mcast: Fix potential UAF in MLD delayed work [ Upstream commit 9b26518b6896a16b809b1e42986f4ebac7bccc1e ] A race condition exists between device teardown and incoming MLD query processing, leading to a Use-After-Free in the MLD delayed work. During device destruction, the primary reference to inet6_dev is dropped, which can drop its refcount to 0. The actual freeing of inet6_dev memory is deferred via RCU. Concurrently, the packet receive path runs under RCU read lock and obtains the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can safely dereference inet6_dev even if its refcount has hit 0. However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it attempts to acquire a reference using in6_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the inet6_dev memory is still scheduled to be freed after the RCU grace period, the device is freed while the work is still scheduled. When the work runs, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in6_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not schedule the work. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit f5b1071767222ac42c71799ee0236bc3df854ca8 Author: Kuniyuki Iwashima Date: Wed Jul 2 16:01:19 2025 -0700 ipv6: mcast: Replace locking comments with lockdep annotations. [ Upstream commit 818ae1a5ecb41d82ad180a99c39111f051894d90 ] Commit 63ed8de4be81 ("mld: add mc_lock for protecting per-interface mld data") added the same comments regarding locking to many functions. Let's replace the comments with lockdep annotation, which is more helpful. Note that we just remove the comment for mld_clear_zeros() and mld_send_cr(), where mc_dereference() is used in the entry of the function. While at it, a comment for __ipv6_sock_mc_join() is moved back to the correct place. Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250702230210.3115355-3-kuni1840@gmail.com Signed-off-by: Jakub Kicinski Stable-dep-of: 9b26518b6896 ("ipv6: mcast: Fix potential UAF in MLD delayed work") Signed-off-by: Sasha Levin commit 01d60bf6a72ffab0a2d797168e3cf4a9e6778a9f Author: Suman Ghosh Date: Thu Jul 2 09:04:51 2026 +0530 octeontx2-pf: check DMAC extraction support before filtering [ Upstream commit 235acadd310533ba386ae61ad155b72bee381559 ] Currently, configuring a VF MAC address via the PF (e.g., 'ip link set vf 0 mac ') blindly attempts to install a DMAC-based hardware filter. However, the hardware parser profile might not support DMAC extraction. Check if the hardware parsing profile supports DMAC extraction before adding the filter. Additionally, emit a warning message to inform the operator if the MAC filter installation fails due to missing DMAC extraction support. Update config->mac only after hardware programming succeeds in otx2_set_vf_mac(). Fixes: f0c2982aaf98 ("octeontx2-pf: Add support for SR-IOV management functions") Signed-off-by: Suman Ghosh Signed-off-by: Nitin Shetty J Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260702033451.2969880-1-nshettyj@marvell.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit b9aa556361de3260b240eeec8bd496bc67c5b4aa Author: Suman Ghosh Date: Fri Nov 18 11:03:29 2022 +0530 octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules [ Upstream commit 674b3e164238a31f236ac63f82d5d160f7d4c201 ] 1. If a profile does not support DMAC extraction then avoid installing NPC flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not supported by the profile then avoid installing broadcast and multicast rules. 2. Allow MCAM entry insertion for promiscuous mode. 3. For the profiles where DMAC is not extracted in MKEX key default unicast entry installed by AF is not valid. Hence do not use action from the AF installed default unicast entry for such cases. 4. Adjacent packet header fields in a packet like IP header source and destination addresses or UDP/TCP header source port and destination can be extracted together in MKEX profile. Therefore MKEX profile can be configured to in two ways: a. Total of 4 bytes from start of UDP header(src port + destination port) or b. Two bytes from start and two bytes from offset 2 Signed-off-by: Suman Ghosh Signed-off-by: Subbaraya Sundeep Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com Signed-off-by: Paolo Abeni Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit 7a38ff05bdb784eba489ae7b168e3fefecaaffbe Author: Suman Ghosh Date: Mon Oct 31 14:38:56 2022 +0530 octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header extraction support [ Upstream commit 2cee6401c4eaa562abc1d437d5d03e80bbee79c1 ] 1. It is possible to have custom mkex profiles which do not extract DMAC at all into the key. Hence allow mkex profiles which do not have DMAC to be loaded into MCAM hardware. This patch also adds debugging prints needed to identify profiles with wrong configuration. 2. If a mkex profile set "l2l3mb" field for Rx interface, then Rx multicast and broadcast entry should be configured. Signed-off-by: Suman Ghosh Link: https://lore.kernel.org/r/20221031090856.1404303-1-sumang@marvell.com Signed-off-by: Jakub Kicinski Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit c0141eb8923714bbd06952b8864616e390338545 Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:45 2022 +0530 octeontx2-af: Drop rules for NPC MCAM [ Upstream commit c6238bc0614d3bafa5f491a065584b2e5ba6194a ] NPC exact match table installs drop on hit rules in NPC mcam for each channel. This rule has broadcast and multicast bits cleared. Exact match bit cleared and channel bits set. If exact match table hit bit is 0, corresponding NPC mcam drop rule will be hit for the packet and will be dropped. Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit a45ef4493bfc82d6e02d446ba2ac28df83041e96 Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:44 2022 +0530 octeontx2-af: FLR handler for exact match table. [ Upstream commit 799f02ef2ce38e5da7f9c8724df87d5043287526 ] FLR handler should remove/free all exact match table resources corresponding to each interface. Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit 446b319772f444c54e78bed167d54e1ee12d2e93 Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:43 2022 +0530 octeontx2-af: devlink configuration support [ Upstream commit ffd92c57469d9395ed2df1ee9d71bba39b37d950 ] CN10KB silicon supports Exact match feature. This feature can be disabled through devlink configuration. Devlink command fails if DMAC filter rules are already present. Once disabled, legacy RPM based DMAC filters will be configured. Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit 14f31534628d5b24951e2186ff2c234eaa477d2e Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:42 2022 +0530 octeontx2-af: Exact match scan from kex profile [ Upstream commit 60ec393117503e97a59ff9545b1b5be1a875c1c7 ] CN10KB silicon supports exact match table. Scanning KEX profile should check for exact match feature is enabled and then set profile masks properly. These kex profile masks are required to configure NPC MCAM drop rules. If there is a miss in exact match table, these drop rules will drop those packets. Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit ce57c5cf7d7f3a0f96ecb1127cf191aa6417c5ad Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:41 2022 +0530 octeontx2-af: Exact match support [ Upstream commit 017691914c115903ee513d9ca058335bb35f8bd6 ] CN10KB silicon has support for exact match table. This table can be used to match maimum 64 bit value of KPU parsed output. Hit/non hit in exact match table can be used as a KEX key to NPC mcam. This patch makes use of Exact match table to increase number of DMAC filters supported. NPC mcam is no more need for each of these DMAC entries as will be populated in Exact match table. This patch implements following 1. Initialization of exact match table only for CN10KB. 2. Add/del/update interface function for exact match table. Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit 43ebbebe4ec62628390d54219d7978e4556bfba7 Author: Ratheesh Kannoth Date: Fri Jul 8 10:11:40 2022 +0530 octeontx2-af: Use hashed field in MCAM key [ Upstream commit a95ab93550d33ec870bd8eda5e7814c1e28ab6d0 ] CN10KB variant of CN10K series of silicons supports a new feature where in a large protocol field (eg 128bit IPv6 DIP) can be condensed into a small hashed 32bit data. This saves a lot of space in MCAM key and allows user to add more protocol fields into the filter. A max of two such protocol data can be hashed. This patch adds support for hashing IPv6 SIP and/or DIP. Signed-off-by: Suman Ghosh Signed-off-by: Ratheesh Kannoth Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit 0a8665ba195141b5ecfc899747633e97ec09e0e0 Author: Rakesh Babu Date: Wed Oct 27 23:37:45 2021 +0530 octeontx2-af: debugfs: Add channel and channel mask. [ Upstream commit 9716a40a0f482b91af485b1130cca19441243177 ] This patch is to dispaly channel and channel_mask for each RX interface of NPC MCAM rule. Signed-off-by: Rakesh Babu Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller Stable-dep-of: 235acadd3105 ("octeontx2-pf: check DMAC extraction support before filtering") Signed-off-by: Sasha Levin commit e1df6cff03aad8c96e55a8b2a991e505c7a3ff6f Author: Samuel Moelius Date: Thu Jul 2 00:07:59 2026 +0000 net/sched: cake: reject overhead values that underflow length [ Upstream commit b7f97cae7ec1b6c3c32843c42be218690d310467 ] CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. Fixes: a729b7f0bd5b ("sch_cake: Add overhead compensation support to the rate shaper") Assisted-by: Codex:gpt-5.5-cyber-preview Signed-off-by: Samuel Moelius Acked-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20260702000758.297407.e5c888d9d99d.cake-overhead-underflow@trailofbits.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 8948d6c3f116ef4ae9d13179b98d38de72525b2a Author: Enrico Pozzobon Date: Wed Jul 1 16:47:23 2026 +0200 net: usb: lan78xx: disable VLAN filter in promiscuous mode [ Upstream commit 60444706aa17616efc03190d099ac347e28b3d0a ] The hardware VLAN filter (RFE_CTL_VLAN_FILTER_) drops VLAN-tagged frames whose VID has not been registered via lan78xx_vlan_rx_add_vid(). It is left enabled in promiscuous mode, so packet capture (e.g. tcpdump or Wireshark) does not see tagged frames for unregistered VIDs. Clear the filter while the interface is promiscuous and restore it from NETIF_F_HW_VLAN_CTAG_FILTER otherwise. Enforce the same condition in lan78xx_set_features() so netdev_update_features() cannot re-enable the filter while promiscuous. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Enrico Pozzobon Reviewed-by: Nicolai Buchwitz Link: https://patch.msgid.link/20260701-lan78xx-vlan-promisc-v3-1-232266d32743@dissecto.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 24c3fa71f9947b0e1f3b954db1b769b44140192e Author: Hui Wang Date: Sun Jun 7 15:24:30 2026 +0800 ring-buffer: Fix event length with forced 8-byte alignment [ Upstream commit c37e0a4b79a6bbb96ce5ffe279d7c001e20529e0 ] When RB_FORCE_8BYTE_ALIGNMENT is true, rb_calculate_event_length() reserves the space of event->array[0] for placing the data length and rb_update_event() stores the data length in event->array[0] accordingly. As a result the whole event length will add extra 4 bytes for sizeof(event.array[0]) unconditionally. But ring_buffer_event_length() only subtracts the sizeof(event->array[0]) for events larger than RB_MAX_SMALL_DATA + sizeof(event->array[0]). As a result, small events on architectures with RB_FORCE_8BYTE_ALIGNMENT=true report a data length that is 4 bytes larger than expected. To fix it, add the RB_FORCE_8BYTE_ALIGNMENT as a condition to subtract the size of that length field whenever RB_FORCE_8BYTE_ALIGNMENT is true. This issue is observed in a riscv64 kernel with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, when we run ftrace selftest trace_marker_raw.tc, we get the weird log: for cases where the id is 1..100, the number of data field is 8*N, but once id exceeds 100, the number of data field becomes 8*N+4: # 1 buf: 58 00 00 00 80 5e d1 63 (number of data field is 8*1) ... # a buf: 58 ... (number of data field is 8*2) ... # 64 buf: 58 ... (number of data field is 8*13) # 65 buf: 58 ... (number of data field is 8*13+4) After applying this change, the number of data field keeps being 8*N+4 consistently. Link: https://patch.msgid.link/20260607072431.125633-2-hui.wang@canonical.com Fixes: 2271048d1b3b ("ring-buffer: Do 8 byte alignment for 64 bit that can not handle 4 byte align") Signed-off-by: Hui Wang Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Sasha Levin commit bd56c23f1f8681a2857ee924a8bd3abf87c8913b Author: Weiming Shi Date: Wed Jul 1 09:06:14 2026 -0700 Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() [ Upstream commit dd068ef044128db655f48323a4acfd5907e04903 ] bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working. Fixes: ddd68ec8f484 ("Bluetooth: bpa10x: Read revision information in setup stage") Reported-by: Xiang Mei Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi Reported-by: Xiang Mei Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 99ba43b6c7fc36eb6fbd6f52e01d114f9e1b4363 Author: Pauli Virtanen Date: Wed Jul 1 18:46:39 2026 +0300 Bluetooth: ISO: exclude RFU bits from ISO_SDU_Length [ Upstream commit fd076d8deeab6f9f18ef13400f89e1f550df665b ] slen contains ISO_SDU_Length (12 bits), RFU (2 bits), Packet_Status_Flags (2 bits). Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack macro. Fixes: 4de0fc599eb9 ("Bluetooth: Add definitions for CIS connections") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 8145b432136285e01091815b48ceb2dae261f262 Author: Xiang Mei Date: Tue Jun 30 11:32:27 2026 -0700 net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket [ Upstream commit 9d160b35cc34a2ba8229d07651468a7848325135 ] smc_cdc_rx_handler() looks up the connection by token under the link group's conns_lock, drops the lock, and then dereferences conn and the smc_sock derived from it, ending in sock_hold(&smc->sk) inside smc_cdc_msg_recv(). No reference is held across the lock release. The only reference pinning the socket while the connection is discoverable in the link group is taken in smc_lgr_register_conn() (sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both under conns_lock. Once the handler drops conns_lock, a concurrent close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn() can drop that reference and free the smc_sock, so the handler's later sock_hold() runs on freed memory: WARNING: lib/refcount.c:25 at refcount_warn_saturate Workqueue: rxe_wq do_work refcount_warn_saturate (lib/refcount.c:25) smc_cdc_msg_recv (net/smc/smc_cdc.c:430) smc_cdc_rx_handler (net/smc/smc_cdc.c:502) smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445) tasklet_action_common (kernel/softirq.c:938) handle_softirqs (kernel/softirq.c:622) Kernel panic - not syncing: panic_on_warn set Only SMC-R is affected. The SMC-D receive tasklet is stopped by tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection is unregistered, so it cannot run concurrently with the free. Take the socket reference while still holding conns_lock, so the registration reference can no longer be the last one, and drop it once the handler is done. Fixes: d7b0e37c1ac1 ("net/smc: restructure CDC message reception") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260630183227.2044998-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit a54d76d176e50d2fdbd39b7231efe256170339e4 Author: Xiang Mei Date: Tue Jun 30 10:41:09 2026 -0700 net: qualcomm: rmnet: validate MAP frame length before ingress parsing [ Upstream commit f0f1887a9e30712a1df03e152dce6fb91344b1f3 ] When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Reported-by: Weiming Shi Suggested-by: Subash Abhinov Kasiviswanathan Signed-off-by: Xiang Mei Reviewed-by: Subash Abhinov Kasiviswanathan Link: https://patch.msgid.link/20260630174110.2003121-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 876baa0048ae3a654ffa170a5b8e1ead667845c7 Author: Daniele Palmas Date: Wed Jan 11 14:05:19 2023 +0100 net: qualcomm: rmnet: add tx packets aggregation [ Upstream commit 64b5d1f8f2d1b3f039cfb0dd8035892015543e58 ] Add tx packets aggregation. Bidirectional TCP throughput tests through iperf with low-cat Thread-x based modems revelead performance issues both in tx and rx. The Windows driver does not show this issue: inspecting USB packets revealed that the only notable change is the driver enabling tx packets aggregation. Tx packets aggregation is by default disabled and can be enabled by increasing the value of ETHTOOL_A_COALESCE_TX_MAX_AGGR_FRAMES. The maximum aggregated size is by default set to a reasonably low value in order to support the majority of modems. This implementation is based on patches available in Code Aurora repositories (msm kernel) whose main authors are Subash Abhinov Kasiviswanathan Sean Tranchetti Signed-off-by: Daniele Palmas Reviewed-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller Stable-dep-of: f0f1887a9e30 ("net: qualcomm: rmnet: validate MAP frame length before ingress parsing") Signed-off-by: Sasha Levin commit 07be8b8adf91b7ada4c3dacce064d572a6066421 Author: Shigeru Yoshida Date: Wed Jul 1 01:46:20 2026 +0900 qede: fix off-by-one in BD ring consumption on build_skb failure [ Upstream commit a0a558ca7e75b49e71f8c545c30e8c005e6e4e2f ] qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. Fixes: 8a8633978b84 ("qede: Add build_skb() support.") Signed-off-by: Shigeru Yoshida Reviewed-by: Jamie Bainbridge Link: https://patch.msgid.link/20260630164623.3152625-1-syoshida@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit d8ce63d928b457fba7ed1e302492dfd32293671c Author: Wyatt Feng Date: Fri Jul 3 13:04:46 2026 +0800 netfilter: xt_connmark: reject invalid shift parameters [ Upstream commit 1b47026fb4b35bac850ad6e8a4ad7fc018e09ebc ] Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path. Fixes: 472a73e00757 ("netfilter: xt_conntrack: Support bit-shifting for CONNMARK & MARK targets.") Reported-by: Yuan Tan Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Wyatt Feng Reviewed-by: Ren Wei Reviewed-by: Phil Sutter Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit fc416870100cf16d5b9495199355a679c3a02d48 Author: Zhixing Chen Date: Wed Jul 1 18:09:30 2026 +0800 netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop [ Upstream commit 43ccc20b5a733226417832cf16ef45322e594990 ] The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhixing Chen Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit a3ba938f45cb00f6bf49d3aa3647df9b017f5f08 Author: Feng Wu Date: Thu Jun 25 08:44:25 2026 +0000 netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() [ Upstream commit 444853cd438201007da5359821adcc2995655ab1 ] On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Feng Wu Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit b33b44250d57ab0e5a1e2571b5285fb0d0a7f382 Author: Wyatt Feng Date: Sun Jun 28 16:05:54 2026 +0800 netfilter: xt_u32: reject invalid shift counts [ Upstream commit 64cdf7d30ac18e43df6c48004435febb965809a8 ] u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. Fixes: 1b50b8a371e9 ("[NETFILTER]: Add u32 match") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 7c6876ec1b227261b51803f784c7be1b2242a1a0 Author: Qihang Date: Wed Jul 1 10:26:17 2026 +0800 gue: validate REMCSUM private option length [ Upstream commit d335dcc6f521571d57117b8deeebc940836e5450 ] GUE private flags can indicate that remote checksum offload metadata is present. The private flags field itself is accounted for by guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even when GUE_PFLAG_REMCSUM is set. This lets a packet with only the private flags field pass validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum() read the missing REMCSUM start/offset fields from the following bytes. Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that malformed packets are rejected during option validation. Fixes: c1aa8347e73e ("gue: Protocol constants for remote checksum offload") Signed-off-by: Qihang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c087749815379e9af2fdbeb08bfc33870b103958 Author: Xiang Mei Date: Mon Jun 29 21:51:21 2026 -0700 net: usb: net1080: validate packet_len before pad-byte access in rx_fixup [ Upstream commit 03f384bc0cb8d4a1301d4f5b0baef2d980258383 ] For an even packet_len, net1080_rx_fixup() reads the pad byte at skb->data[packet_len] before the skb->len != packet_len check further down, and packet_len is only bounded against NC_MAX_PACKET. A malicious NetChip 1080 device can send a short frame advertising a large even packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the skb: BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14 ... net1080_rx_fixup (drivers/net/usb/net1080.c:384) usbnet_bh (drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3708) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) ... Reject the frame when packet_len >= skb->len before reading. Fixes: 904813cd8a0b ("[PATCH] USB: usbnet (4/9) module for net1080 cables") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260630045121.1565324-1-xmei5@asu.edu Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit ef80b36ff48adb8617ac8adcfd3d3ca99cb51a54 Author: Anshuman Khandual Date: Fri Jun 26 02:28:45 2026 +0100 arm64/mm: Optimize TLB flush in unmap_hotplug_[pmd|pud]_range() [ Upstream commit ff4c5a0de1f2ef7737a8688a86e19301e567020d ] Commit 48478b9f7913 ("arm64/mm: Enable batched TLB flush in unmap_hotplug_range") inadvertently introduced redundant TLB invalidation when clearing a block entry, resulting in unnecessary broadcast invalidation on CPUs without support for range-based invalidation. Re-introduce the old behaviour, along with some expanded comments to help people working in this area next time around. Cc: Catalin Marinas Cc: Will Deacon Cc: Ryan Roberts Cc: David Hildenbrand Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reported-by: Ben Hutchings Closes: https://lore.kernel.org/all/b0d5836032ce3135bfc473f6bff791306d086925.camel@decadent.org.uk/ Fixes: 48478b9f7913 ("arm64/mm: Enable batched TLB flush in unmap_hotplug_range()") Signed-off-by: Anshuman Khandual Reviewed-by: David Hildenbrand (Arm) Reviewed-by: Catalin Marinas [will: Reword comments and commit message] Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 30ff978af92cb51c9ba99f96fc4f4ac80d7001ba Author: Lee Jones Date: Tue Jun 16 11:26:56 2026 +0000 HID: core: Fix OOB read in hid_get_report for numbered reports [ Upstream commit af1a9b65ebe8a948eda805c14b78d4d0767cb1b5 ] When a caller passes a size of 0 to hid_report_raw_event() for a numbered report, the function originally called hid_get_report() before performing any size validation. Inside hid_get_report(), if the report is numbered (report_enum->numbered is true), it unconditionally dereferences data[0] to extract the report ID. With a size of 0, this results in an out-of-bounds read or kernel panic. Fix this by moving the numbered report size validation check before the call to hid_get_report(), ensuring that size is at least 1 before dereferencing the data pointer. Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event") Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 48caee2c106b03301c72fe389ebff00d852c58d5 Author: Georgiy Osokin Date: Sun May 17 15:06:39 2026 +0300 HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() [ Upstream commit 0021eb09041f021c079be1022934a280f7f176c0 ] In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [jkosina@suse.com: extended hash length] Fixes: fabdbf2fd22fa17 ("HID: picoLCD: split driver code") Signed-off-by: Georgiy Osokin Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 7644c621ebccfecb2d243a424c427087cb1f67d8 Author: Myeonghun Pak Date: Fri Jun 26 17:58:37 2026 +0900 ata: sata_gemini: unwind clocks on IDE pinctrl errors [ Upstream commit c0ace4130e813acbabdfaa28d4e94a849c2ffdd7 ] gemini_sata_bridge_init() prepares and enables both SATA PCLKs, then disables them again while keeping the clocks prepared for later bridge start and stop operations. If gemini_setup_ide_pins() fails after that, gemini_sata_probe() returns directly and skips the existing out_unprep_clk unwind path. Route the IDE pinctrl failure through out_unprep_clk so the clocks prepared by gemini_sata_bridge_init() are unprepared before probe fails. Fixes: d872ced29d5f ("ata: sata_gemini: Introduce explicit IDE pin control") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Niklas Cassel Reviewed-by: Linus Walleij Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit 5aeb064985a584f0d54aaca182015af84f62e712 Author: David Howells Date: Mon Jun 22 10:08:55 2026 +0100 afs: Fix unchecked-length string display in debug statement [ Upstream commit 903d37c97228258da71e092f8b4ab260ce81497d ] Fix afs_extract_vlserver_list() to limit the length of the displayed string in a debug statement(). Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Closes: https://sashiko.dev/#/patchset/20260618074903.2374756-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-22-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 6fa9a8a73e16aa22fce6e41cc00d59c767f0a540 Author: David Howells Date: Mon Jun 22 10:08:54 2026 +0100 afs: Fix the volume AFS_VOLUME_RM_TREE is set on [ Upstream commit 56b4e4b26f84411d880f968a539207b0a8889c8c ] Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed. Fixes: 9a6b294ab496 ("afs: Fix use-after-free due to get/remove race in volume tree") Closes: https://sashiko.dev/#/patchset/20260618074903.2374756-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-21-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 2b169eedbb96f37f3f33d7b496d8283194988980 Author: David Howells Date: Mon Jun 22 10:08:51 2026 +0100 afs: Fix vllist leak [ Upstream commit fc10c0ecf06f2981af5d04357612b00051e03e9e ] Fix a leak of the new vllist in afs_update_cell() in the event that it is an empty list (nr_servers == 0), in which case the old list isn't displaced unless the old list is also empty. Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup") Closes: https://sashiko.dev/#/patchset/20260609081738.770127-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-18-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 09c67a7ded481482155b836c8c7f078a3075f8de Author: David Howells Date: Mon Jun 22 10:08:47 2026 +0100 afs: Fix callback service message parsers to pass through -EAGAIN [ Upstream commit 0f36469d7ce98b362934113c550d08bb0c784231 ] The AFS filesystem client uses an rxrpc server to listen for callback notifications. Each callback call type handler has a delivery function that parses the incoming request stream, and this should return -EAGAIN the last packet hasn't yet been seen, but all currently queued received data is consumed. afs_extract_data() does this, but the -EAGAIN return is switched to 0 inadvertantly Fix callback service message parsers to pass through -EAGAIN Fixes: d001648ec7cf ("rxrpc: Don't expose skbs to in-kernel users [ver #2]") Closes: https://sashiko.dev/#/patchset/20260609081738.770127-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-14-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 4e0b047848a855f2c933a6439f76a01743ba5620 Author: Dan Carpenter Date: Mon Jun 22 10:08:36 2026 +0100 afs: Fix error code in afs_extract_vl_addrs() [ Upstream commit 4897cb71d4ab1f7e1a214adb1e4b80176702368d ] The error codes on these paths are only set on the first iteration through the loop. Set the correct error code on every iteration. Fixes: 0a5143f2f89c ("afs: Implement VL server rotation") Signed-off-by: Dan Carpenter Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-3-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit fb0bc1d73264cf35b6e14dbb9f917f867192e2dd Author: Samuel Moelius Date: Mon Jun 29 16:44:59 2026 +0000 net/sched: hhf: clear heavy-hitter state on reset [ Upstream commit a225f8c20712713406ae47024b8df42deacddd4a ] HHF reset does not clear the classifier state used to identify heavy hitters. Packets after reset can therefore be scheduled using flow history from before the reset. The reset operation should return the qdisc to an empty state. Clear the heavy-hitter classifier tables when HHF is reset. Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Assisted-by: Codex:gpt-5.5-cyber-preview Signed-off-by: Samuel Moelius Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cbec404e3e3aaaf20bdbb3f08ae5d2ea188e37b2 Author: Vladimir Zapolskiy Date: Tue Jun 30 17:51:48 2026 +0300 gpio: timberdale: Return -ENOMEM on dynamic memory allocation in probe [ Upstream commit 8d7e62d5e9b2d2ff146f472a9215d7e29c7e2307 ] Out of memory situation on driver's probe is expected to be reported to the driver's framework with a proper -ENOMEM error code. Fixes: 35570ac6039e ("gpio: add GPIO driver for the Timberdale FPGA") Signed-off-by: Vladimir Zapolskiy Link: https://patch.msgid.link/20260630145148.4081967-1-vz@kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit a115d940d474dccd5bc960fc8a97d2820de98e12 Author: Sechang Lim Date: Mon Jun 29 15:41:06 2026 +0000 net/sched: act_bpf: use rcu_dereference_bh() to read the filter [ Upstream commit adc49c7ba690c9b33b8392ec27397456b65d0893 ] tcf_bpf_act() can run from the tc egress path, which holds only rcu_read_lock_bh(), but reads prog->filter with rcu_dereference() and trips lockdep: WARNING: suspicious RCU usage net/sched/act_bpf.c:47 suspicious rcu_dereference_check() usage! 1 lock held by syz.2.1588/12756: #0: (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit net/core/dev.c:4792 tcf_bpf_act+0x6ae/0x940 net/sched/act_bpf.c:47 tcf_classify+0x6e4/0x1080 net/sched/cls_api.c:1860 sch_handle_egress net/core/dev.c:4545 [inline] __dev_queue_xmit+0x2185/0x2c00 net/core/dev.c:4808 packet_sendmsg+0x3dfa/0x5120 net/packet/af_packet.c:3114 The other tc actions and cls_bpf already use rcu_dereference_bh() here. Do the same. Fixes: 1f211a1b929c ("net, sched: add clsact qdisc") Signed-off-by: Sechang Lim Reviewed-by: Amery Hung Link: https://patch.msgid.link/20260629154112.1164986-1-rhkrqnwk98@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit daea7aefe64e16e54691d8410c3a1954e268e611 Author: Gleb Markov Date: Mon Jun 29 16:08:54 2026 +0300 cxgb4: Fix decode strings dump for T6 adapters [ Upstream commit 5d6dc22d62682d93f5f55f145ad792f2891de911 ] Depending on the value of chip_version, the correct decode set is selected. However, the subsequent matching with the t4 encoding type in the if-else block results in a reassignment, which leads to the loss of support for t6_decode as well as reinitializing of values t4_decode and t5_decode. The component history shows that the if-else block previously used for this purpose, as well as the execution order, was not affected by the change. Furthermore, it is suggested by the execution order that the scenario with overwriting and loss of support will be implemented. Delete the if-else block. Fixes: 6df397539cb0 ("cxgb4: Update correct encoding of SGE Ingress DMA States for T6 adapter") Signed-off-by: Gleb Markov Reviewed-by: Potnuri Bharat Teja Link: https://patch.msgid.link/20260629130856.1168-1-markov.gi@npc-ksb.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 50cc5db9f9d29696c04031eadaf633e23b051d5a Author: Longjun Tang Date: Mon Jun 29 10:42:30 2026 +0800 virtio_net: disable cb when NAPI is busy-polled [ Upstream commit 1eb8fc67ca41db71c90866ff76c990d85247daef ] When busy-poll is active, napi_schedule_prep() returns false in virtqueue_napi_schedule(), so virtqueue_disable_cb() is skipped. The device may keep firing irqs until reaches virtqueue_napi_complete(). Under load (received == budget), it will lead to a large number of spurious interrupts. Fix it by disabling the callback at the virtnet_poll() entry. This keeps the callback off while we poll and it is re-enabled by virtqueue_napi_complete() when going idle. Fixes: ceef438d613f ("virtio_net: remove custom busy_poll") Acked-by: Michael S. Tsirkin Signed-off-by: Longjun Tang Link: https://patch.msgid.link/20260629024230.37325-1-lange_tang@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 713f0eab1fe34646e3765aae5c4355a0bee0ac9b Author: Yuho Choi Date: Sun Jun 28 18:07:23 2026 -0400 irqchip/gic-v3-its: Fix OF node reference leak [ Upstream commit 2e1368a9d61bdf5502ddade004f223a5831c5b8c ] of_get_cpu_node() returns a referenced device node. In its_cpu_init_collection(), the Cavium 23144 workaround only uses the node to compare the CPU NUMA node, but the reference is never dropped. Use the device_node cleanup helper for the CPU node reference so it is released when leaving the workaround block, including the NUMA mismatch return path. Fixes: fbf8f40e1658 ("irqchip/gicv3-its: numa: Enable workaround for Cavium thunderx erratum 23144") Signed-off-by: Yuho Choi Signed-off-by: Thomas Gleixner Reviewed-by: Zenghui Yu (Huawei) Acked-by: Marc Zyngier Signed-off-by: Sasha Levin commit 558cb1c42e437620f3ca005ccb6474a0692007d0 Author: Martin Kaiser Date: Thu Jun 25 08:34:46 2026 +0900 tracing: eprobe: read the complete FILTER_PTR_STRING pointer [ Upstream commit 206b25c09080cc20fd4c2bea12d59df4b7ba2121 ] For a char * element in an event, the FILTER_PTR_STRING filter type is used. When the event occurs, a pointer is stored in the ringbuffer. If an eprobe references such a char * element of a "base event", the stored pointer is truncated when it's read from the ringbuffer. $ cd /sys/kernel/tracing $ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events $ echo 1 > tracing_on $ echo 1 > events/eprobes/enable $ sleep 1 $ echo 0 > events/eprobes/enable $ cat trace -0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault) -0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault) The problem is in get_event_field val = (unsigned long)(*(char *)addr); addr points to the position in the ringbuffer where the pointer was stored. The assignment reads only the lowest byte of the pointer. Fix the cast to read the whole pointer. The output of the test above is now -0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick" -0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick" Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/ Fixes: f04dec93466a ("tracing/eprobes: Fix reading of string fields") Signed-off-by: Martin Kaiser Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit 0684b1254b057477251786910dbe45652fed2fd3 Author: Masami Hiramatsu (Google) Date: Thu Jun 25 08:34:46 2026 +0900 tracing/events: Fix to check the simple_tsk_fn creation [ Upstream commit cda1fbfc5313bb90daa271d45eea4a8d317a8544 ] Sashiko pointed that this sample code does not correctly handle the failure of thread creation because kthread_run() can return -errno. Check the simple_tsk_fn is correctly initialized (created) or not. Link: https://lore.kernel.org/all/178165817322.269421.3992299509400184196.stgit@devnote2/ Link: https://sashiko.dev/#/patchset/178092865666.163648.10457567771536160909.stgit%40devnote2 Fixes: 9cfe06f8cd5c ("tracing/events: add trace-events-sample") Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit c86579b0a2d201792bcb59316629f4ba4758cfc8 Author: Ido Schimmel Date: Mon Jun 29 10:21:17 2026 +0300 bridge: stp: Fix a potential use-after-free when deleting a bridge [ Upstream commit 2a00517db8de4be7df3d483b215c5544fb30a191 ] The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Noam Rathaus Reported-by: Neil Young Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Reviewed-by: Breno Leitao Link: https://patch.msgid.link/20260629072117.497959-1-idosch@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 1465744fb5d2d47511e81a1f0c83440c4708cbe5 Author: Rosen Penev Date: Fri Jun 26 15:52:28 2026 -0700 net: gianfar: dispose irq mappings on probe failure and device removal [ Upstream commit dbf803bc4a8b0522c9a12560c20905a5952d1cb9 ] irq_of_parse_and_map() creates irqdomain mappings that should be balanced with irq_dispose_mapping(). The driver never called irq_dispose_mapping(), leaking mappings on probe failure and device removal. Fix by adding irq_dispose_mapping() in free_gfar_dev() and expanding its loop from priv->num_grps to MAXGROUPS so the error path also catches partially-initialized groups. All irqinfo pointers are pre-initialized to NULL in gfar_of_init(), making the NULL-guarded walk in free_gfar_dev() safe for every scenario. gfar_parse_group() itself is left as a simple parse function with no resource management; cleanup is centralized in the caller's error path. Assisted-by: opencode:big-pickle Fixes: b31a1d8b4151 ("gianfar: Convert gianfar to an of_platform_driver") Signed-off-by: Rosen Penev Link: https://patch.msgid.link/20260626225228.427392-1-rosenp@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 4359376e6238d89977a35086e47ca3b07f43e850 Author: Xiang Mei Date: Sat Jun 27 13:53:53 2026 -0700 usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup() [ Upstream commit 8ff7f2a6da4fccaa5cc9be7251a24e71e29fbd1a ] genelink_rx_fixup() splits an aggregated RX frame into its individual packets, using a per-packet length taken from device-supplied data. That length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared against how many bytes were actually received. A malicious GeneLink (GL620A) device can therefore send a short URB whose header claims packet_count > 1 and a first packet of up to 1514 bytes. skb_put_data(gl_skb, packet->packet_data, size); then copies past the end of the receive buffer and hands the adjacent slab contents up the network stack, an out-of-bounds read that leaks kernel heap. No privilege is required: the path runs in the usbnet RX softirq as soon as the interface is up. BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112) Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14 Call Trace: ... __asan_memcpy (mm/kasan/shadow.c:105) genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112) usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589) process_one_work (kernel/workqueue.c:3322) bh_worker (kernel/workqueue.c:3405) tasklet_action (kernel/softirq.c:965) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... skb_pull() already verifies that the requested length fits the buffer and returns NULL otherwise. Move it ahead of the copy and check its result, so a packet that overruns the received data is rejected before it is read. Well-formed frames, whose packets are fully present, are unaffected. Fixes: 47ee3051c856 ("[PATCH] USB: usbnet (5/9) module for genesys gl620a cables") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260627205353.4000788-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 89f9c5fee3c64c5cabc34e65599308fd3c879cf9 Author: Pengfei Zhang Date: Thu Jun 25 15:05:17 2026 +0800 ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump [ Upstream commit 9facb861dc6b9b9ea9793ef5032a9a826f7a4229 ] inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table. Fixes: 1b43af5480c3 ("[IPV6]: Increase number of possible routing tables to 2^32") Signed-off-by: Pengfei Zhang Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260625070517.965597-1-zhangfeionline@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1817279ec7245cd61bbb6dbf3b13e659770d399f Author: Eric Dumazet Date: Fri Mar 29 18:30:53 2024 +0000 ipv6: remove RTNL protection from inet6_dump_fib() [ Upstream commit 5fc68320c1fb3c7d456ddcae0b4757326a043e6f ] No longer hold RTNL while calling inet6_dump_fib(). Also change return value for a completed dump, so that NLMSG_DONE can be appended to current skb, saving one recvmsg() system call. Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20240329183053.644630-1-edumazet@google.com Signed-off-by: Jakub Kicinski Stable-dep-of: 9facb861dc6b ("ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump") Signed-off-by: Sasha Levin commit d20024dd0860fc488c9f0ffaf4f4b64e6a6a7772 Author: Eric Dumazet Date: Thu Feb 22 10:50:17 2024 +0000 inet: allow ip_valid_fib_dump_req() to be called with RTNL or RCU [ Upstream commit 22e36ea9f5d7707ae3d64c497d172f4ef735c353 ] Add a new field into struct fib_dump_filter, to let callers tell if they use RTNL locking or RCU. This is used in the following patch, when inet_dump_fib() no longer holds RTNL. Signed-off-by: Eric Dumazet Reviewed-by: Donald Hunter Signed-off-by: David S. Miller Stable-dep-of: 9facb861dc6b ("ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump") Signed-off-by: Sasha Levin commit 5e6ec0ba70276c9d95a68768da20a7e427011bc0 Author: Eric Dumazet Date: Thu Feb 22 10:50:15 2024 +0000 rtnetlink: add RTNL_FLAG_DUMP_UNLOCKED flag [ Upstream commit 386520e0ecc01004d3a29c70c5a77d4bbf8a8420 ] Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag allows dump operations registered via rtnl_register() or rtnl_register_module() to opt-out from RTNL protection. Signed-off-by: Eric Dumazet Reviewed-by: Donald Hunter Signed-off-by: David S. Miller Stable-dep-of: 9facb861dc6b ("ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump") Signed-off-by: Sasha Levin commit 39f2d4b7c731e42cb242570b9da51f26043546aa Author: Eric Dumazet Date: Thu Feb 22 10:50:14 2024 +0000 rtnetlink: change nlk->cb_mutex role [ Upstream commit e39951d965bf58b5aba7f61dc1140dcb8271af22 ] In commit af65bdfce98d ("[NETLINK]: Switch cb_lock spinlock to mutex and allow to override it"), Patrick McHardy used a common mutex to protect both nlk->cb and the dump() operations. The override is used for rtnl dumps, registered with rntl_register() and rntl_register_module(). We want to be able to opt-out some dump() operations to not acquire RTNL, so we need to protect nlk->cb with a per socket mutex. This patch renames nlk->cb_def_mutex to nlk->nl_cb_mutex The optional pointer to the mutex used to protect dump() call is stored in nlk->dump_cb_mutex Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Stable-dep-of: 9facb861dc6b ("ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump") Signed-off-by: Sasha Levin commit 82e4ab03a6ab9b87667410f5143bc484d7a62bdc Author: Matti Vaittinen Date: Fri Jun 26 10:22:04 2026 +0300 hwmon: adm1275: Prevent reading uninitialized stack [ Upstream commit 553f9517813912a5ab661af5504485d96824a61c ] While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array. Signed-off-by: Matti Vaittinen Fixes: 87102808d039 ("hwmon: (pmbus/adm1275) Validate device ID") Link: https://lore.kernel.org/r/c8ad38e0cdb347261c6245de2b7965e747f28d22.1782458224.git.mazziesaccount@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 6d203bdd227fca1787f8a80cf84b990936633c5a Author: Matvey Kovalev Date: Tue Jun 23 17:45:54 2026 +0300 qede: fix out-of-bounds check for cqe->len_list[] [ Upstream commit f9ba47fce5932c15891c89c60e76dfaca919cb8d ] Move index check before element access. Fixes: 896f1a2493b5 ("net: qlogic/qede: fix potential out-of-bounds read in qede_tpa_cont() and qede_tpa_end()") Signed-off-by: Matvey Kovalev Link: https://patch.msgid.link/20260623144602.3521-1-matvey.kovalev@ispras.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7247d05c987c3eec4bb7c2306dbd77ecdf3b7c73 Author: Nuoqi Gui Date: Tue Jun 23 18:32:31 2026 +0800 seg6: validate SRH length before reading fixed fields [ Upstream commit a75d99f46bf21b45965ce39c5cfb3b8bb5ffb1aa ] seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. Fixes: fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers") Signed-off-by: Nuoqi Gui Reviewed-by: Andrea Mayer Link: https://patch.msgid.link/20260623-f01-17-seg6-srh-len-v2-1-2edc40e9e3e1@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8921f4dc9cf1a9ca31261e361775f8d8011dc608 Author: Pengpeng Hou Date: Wed Jun 24 21:18:28 2026 +0800 gpio: htc-egpio: use managed gpiochip registration [ Upstream commit 17326db5f0ab4ec1901e75d052b5ebef486b467f ] egpio_probe() registers each nested gpio_chip with gpiochip_add_data() but ignores the return value. If one registration fails, probe still returns success even though one of the chips was not published to gpiolib. Use devm_gpiochip_add_data() and fail probe if any chip registration fails. This lets devres unwind already registered chips and prevents the driver from publishing a partially initialized device. Fixes: a1635b8fe59d ("[ARM] 4947/1: htc-egpio, a driver for GPIO/IRQ expanders with fixed input/output pins") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260624131828.94139-1-pengpeng@iscas.ac.cn Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 46e97805e3e759ac960d2baa4aff4dd2c97abd06 Author: Pengpeng Hou Date: Wed Jun 24 21:16:45 2026 +0800 gpio: mvebu: fail probe if gpiochip registration fails [ Upstream commit 479e91fc92416a4d54d2b3150aa1e4550d9cc759 ] mvebu_gpio_probe() registers the GPIO chip with devm_gpiochip_add_data() but ignores the return value. If registration fails, probe continues and leaves later code operating on a GPIO chip that was never published to gpiolib. Return the registration error so the device fails probe cleanly. Fixes: fefe7b092345 ("gpio: introduce gpio-mvebu driver for Marvell SoCs") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260624131645.86884-1-pengpeng@iscas.ac.cn Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 339e6c39729a00260ec646f2b70890ec3c99c8ae Author: Pengpeng Hou Date: Tue Jun 23 21:58:34 2026 +0800 spi: sh-msiof: abort transfers when reset times out [ Upstream commit 6dbaa4d288432c697cea47028480481b8b29bd6a ] sh_msiof_spi_reset_regs() asserts TX/RX reset and polls until the reset bits clear, but the poll result is ignored. sh_msiof_transfer_one() can therefore continue programming a transfer after the controller did not leave reset. Return the reset poll result from the helper and abort the transfer on timeout, matching the existing transfer path's error-return style. Fixes: fedd6940682a ("spi: sh-msiof: Add reset of registers before starting transfer") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260623135834.55442-1-pengpeng@iscas.ac.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 96259e89d3689ec1513e88520fc3a640c08db86d Author: Martin Kaiser Date: Thu Jun 25 08:34:45 2026 +0900 tracing: probes: fix typo in a log message [ Upstream commit 72c8646956ffc8050bb8be5988a0f28fc37e1ac4 ] Fix a typo ("Invalid $-variable") in a log message. Link: https://lore.kernel.org/all/20260507081041.885781-4-martin@kaiser.cx/ Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events") Signed-off-by: Martin Kaiser Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Sasha Levin commit f1d04fefb0c2a2de32d9cee22cdc2088be3758d1 Author: Ruoyu Wang Date: Tue Jun 23 10:57:59 2026 +0800 net: sungem: fix probe error cleanup [ Upstream commit 36dea2f639249460d13f6ca66b2a9064187cd34d ] gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ruoyu Wang Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260623025759.3468566-1-ruoyuw560@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8c7a489aa71d2693752b2e794a68bf672d16c829 Author: Yun Zhou Date: Mon Jun 22 15:43:50 2026 +0800 net: mvneta: re-enable percpu interrupt on resume [ Upstream commit fd398d6480987e4c84fff0aaab6b9d6642a93343 ] On Marvell MPIC platforms (Armada 370/XP/38x), mvneta uses a percpu IRQ disable/enable scheme for NAPI: the ISR (mvneta_percpu_isr) calls disable_percpu_irq() to mask the MPIC per-CPU interrupt and schedules NAPI poll, which calls enable_percpu_irq() on completion to unmask. If suspend occurs while NAPI poll is pending (between disable_percpu_irq in the ISR and enable_percpu_irq in poll completion), the interrupt is never re-enabled: 1. mvneta_percpu_isr: disable_percpu_irq() + napi_schedule() => MPIC masked, percpu_enabled cpumask bit cleared 2. NAPI poll does not complete before suspend proceeds (on PREEMPT_RT this is highly likely since softirqs run in ksoftirqd which gets frozen; on non-RT it can happen when softirq processing is deferred to ksoftirqd) 3. mvneta_stop_dev => napi_disable(): cancels the pending poll without executing the completion path 4. suspend_device_irqs => IRQCHIP_MASK_ON_SUSPEND: masks MPIC (already masked, but records IRQS_SUSPENDED) 5. Resume: mpic_resume checks irq_percpu_is_enabled() => false (bit was cleared in step 1) => skips unmask 6. mvneta_start_dev only restores device-level INTR_NEW_MASK, does not touch the MPIC per-CPU mask Result: MPIC per-CPU interrupt stays masked permanently. The NIC generates interrupts (INTR_NEW_CAUSE != 0) but the CPU never receives them, causing complete loss of network connectivity. Fix by calling on_each_cpu(mvneta_percpu_enable) in the resume path to unconditionally unmask the MPIC per-CPU interrupt regardless of pre-suspend state. Fixes: 12bb03b436da ("net: mvneta: Handle per-cpu interrupts") Signed-off-by: Yun Zhou Reviewed-by: Sebastian Andrzej Siewior Link: https://patch.msgid.link/20260622074350.1666290-1-yun.zhou@windriver.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c9630d27cd521868c99363cf6adc2485abe633f2 Author: Haoxiang Li Date: Tue Jun 23 18:08:48 2026 +0800 rtc: cmos: unregister HPET IRQ handler on probe failure [ Upstream commit a5bb580df018b5d1c5668f05f7979044fb19e23a ] cmos_do_probe() registers cmos_interrupt() as the HPET RTC IRQ handler before requesting the RTC IRQ and registering the RTC device. If either request_irq() or devm_rtc_register_device() fails afterwards, the error path leaves the HPET RTC IRQ handler installed. This leaves a stale handler behind and make a later hpet_register_irq_handler() fail with -EBUSY. Track whether the HPET handler was registered successfully and undo the registration on the probe error path. Also mask the HPET RTC IRQ bits to match the normal shutdown cleanup. Fixes: 9d8af78b0797 ("rtc: add HPET RTC emulation to RTC_DRV_CMOS") Signed-off-by: Haoxiang Li Link: https://patch.msgid.link/20260623100848.2127281-1-haoxiang_li2024@163.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 31373a9822a8332d8c4300630cc547f2088a6113 Author: Fredrik M Olsson Date: Wed May 20 16:48:54 2026 +0200 rtc: ds1307: Fix off-by-one issue with wday for rx8130 [ Upstream commit 6882aab3c66112b33b251be95c09c8ead3e8d580 ] The RTC represent each weekday with a individual bit set in the WDAY register, where the 0th bit represent the first day of the week and the 6th bit represents the last day of the week. For each passed day the chip performs a rotary-left-shift by one to advance the weekday by one. The tm_wday field represent weekdays by a value in the range of 0-6. The fls() function return the bit index of the last bit set. To handle when there are no bits set it will return 0, and if the 0th bit is set it will return 1, and if the 1st bit is set it will return 2, and so on. In order to make the result of the fls() function fall into the expected range of 0-6 (instead of 1-7) this patch subtracts one from the result (which matches how the value is written in ds1307_set_time()). Fixes: 204756f016726 ("rtc: ds1307: Fix wday settings for rx8130") Reviewed-by: Nobuhiro Iwamatsu Signed-off-by: Fredrik M Olsson Link: https://patch.msgid.link/20260520-ds1307-rx8901-add-v2-2-e069ea32e1db@axis.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 0b33529e6a2c43f54b65078ac5c1f7c57d25f5ca Author: Huiwen He Date: Wed Jun 24 10:15:43 2026 +0800 smb/client: preserve errors from smb2_set_sparse() [ Upstream commit 2a4b3d2db5c6fcdba889baf7b2ae5661b0beac89 ] smb2_set_sparse() converts every FSCTL_SET_SPARSE failure to false and marks sparse support as broken for the share. Callers therefore report EOPNOTSUPP even for errors such as ENOSPC or EACCES, and later sparse operations remain disabled until the share is unmounted. Return the SMB2 ioctl error directly. Set broken_sparse_sup only for EOPNOTSUPP, which indicates that the server does not support the request. Update smb3_punch_hole() to propagate the error returned by smb2_set_sparse(). Fixes: 3d1a3745d8ca ("Add sparse file support to SMB2/SMB3 mounts") Signed-off-by: Huiwen He Reviewed-by: ChenXiaoSong Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 2b3bf4ef6e5b5728618e52ef71e9a7be3bcd8335 Author: Fernando Fernandez Mancera Date: Mon Jun 22 15:08:55 2026 +0200 ipv6: fix error handling in disable_policy sysctl [ Upstream commit 3e0e51c0ee1d08cc9d48dc17f3248d5b31cf8066 ] When writing to the disable_policy sysctl, if proc_dointvec() fails to parse the input, it returns a negative error code. The current implementation is resetting the position argument even if an error occurred during proc_dointvec() and not only during sysctl restart. Fix this by checking the return value of proc_dointvec() and returning early on failure. Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl") Reviewed-by: Nicolas Dichtel Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260622130857.5115-5-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9ac5f8019075f19223764b2af634950e0efd523a Author: Fernando Fernandez Mancera Date: Mon Jun 22 15:08:54 2026 +0200 ipv6: fix error handling in forwarding sysctl [ Upstream commit 058b9b19f9639fe1e1225a17c540f61b65bee6ad ] When writing to the forwarding sysctl, if proc_dointvec() fails to parse the input, it returns a negative error code. The current implementation is overwriting that error for write operations. This results in a silent failure, it returns a successful write although the configuration was not modified at all. When modifying the "all" variant it can also modify the configuration of existing interfaces to the wrong value. Fix this by checking the return value of proc_dointvec() and returning early on failure. In addition, adjust return code of addrconf_fixup_forwarding() for successful operation. Fixes: b325fddb7f86 ("ipv6: Fix sysctl unregistration deadlock") Reviewed-by: Nicolas Dichtel Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260622130857.5115-4-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9a054ec76a917029a91a4467851c91c0ee88fe03 Author: Fernando Fernandez Mancera Date: Mon Jun 22 15:08:53 2026 +0200 ipv6: fix error handling in ignore_routes_with_linkdown sysctl [ Upstream commit cf4f2b14401f29ccac56393ca9e4b42a2505f540 ] When writing to the ignore_routes_with_linkdown sysctl, if proc_dointvec() fails to parse the input, it returns a negative error code. The current implementation is overwriting that error for write operations. This results in a silent failure, it returns a successful write although the configuration was not modified at all. When modifying the "all" variant it can also modify the configuration of existing interfaces to the wrong value. Fix this by checking the return value of proc_dointvec() and returning early on failure. Fixes: 35103d11173b ("net: ipv6 sysctl option to ignore routes when nexthop link is down") Reviewed-by: Nicolas Dichtel Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260622130857.5115-3-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5c1356c8738a3e9782014d9edff57d24e558e767 Author: Fernando Fernandez Mancera Date: Mon Jun 22 15:08:52 2026 +0200 ipv6: fix error handling in disable_ipv6 sysctl [ Upstream commit c779441e5070e2268bdfe77f6e2e0de926c431e3 ] When writing to the disable_ipv6 sysctl, if proc_dointvec() fails to parse the input, it returns a negative error code. The current implementation is overwriting that error for write operations. This results in a silent failure, it returns a successful write although the configuration was not modified at all. When modifying the "all" variant it can also modify the configuration of existing interfaces to the wrong value. Fix this by checking the return value of proc_dointvec() and returning early on failure. Fixes: 56d417b12e57 ("IPv6: Add 'autoconf' and 'disable_ipv6' module parameters") Reviewed-by: Nicolas Dichtel Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260622130857.5115-2-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5ed3d6f85991656667059d3fa5a1d683ac58c447 Author: Jamal Hadi Salim Date: Sat Jun 20 09:07:49 2026 -0400 net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle [ Upstream commit a8a02897f2b479127db261de05cbf0c28b98d159 ] tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the defragmentation engine (e.g. act_ct on out-of-order fragments). When that happens the skb is no longer owned by the caller and must not be touched again. tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the switch and returned the skb to the caller as if classification had passed. The only qdisc that wires up qevents today is RED, via three call sites (qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop) red_enqueue() was continuing to operate on an skb it no longer owns in this case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF. tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10 tc filter add block 10 ... action ct (with ct defrag enabled and traffic that produces out-of-order fragments, e.g. a fragmented UDP stream) Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress and egress fast paths do: treat it as stolen and return NULL without touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be dropped/freed here, as it is no longer owned by us. Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags") Reported-by: Zero Day Initiative Tested-by: Victor Nogueira Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260620130749.226642-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fc51373345e7e6ea73da2650cb497309c50b077a Author: Eric Dumazet Date: Mon Jun 22 11:18:25 2026 +0000 veth: fix NAPI leak in XDP enable error path [ Upstream commit 6739027cb72da26890edd424c77080d187b2a92e ] During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct in the device's napi_list. When the veth device is later destroyed, the freed queue memory (which contains the leaked NAPI structure) can be reused. The subsequent device teardown iterates the NAPI list and corrupts the reallocated memory, leading to UAF. Fix this by explicitly deleting the NAPI association for the failed index 'i' before rolling back the successfully configured queues. Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path") Reported-by: Guenter Roeck Signed-off-by: Eric Dumazet Cc: Björn Töpel Cc: Daniel Borkmann Cc: Ilias Apalodimas Cc: Michael S. Tsirkin Cc: Tariq Toukan Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/20260622111825.88337-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 201dcbbfb27f3db85c8cf125a75f3164a83ceb32 Author: Aleksandrova Alyona Date: Thu Jun 18 14:05:08 2026 +0300 net: dsa: sja1105: round up PTP perout pin duration [ Upstream commit aee5836273b07b439fb245fb43930664d8b78518 ] pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time(). Fixes: 747e5eb31d59 ("net: dsa: sja1105: configure the PTP_CLK pin as EXT_TS or PER_OUT") Signed-off-by: Aleksandrova Alyona Link: https://patch.msgid.link/20260618110508.53094-1-aga@itb.spb.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c99ca049e910d61ddbd28cc2c47242f2bfbb4970 Author: Xiang Mei Date: Sat Jun 20 13:15:31 2026 -0700 net, bpf: check master for NULL in xdp_master_redirect() [ Upstream commit e82d8cc4321c373dc46e741cd2dfdaa7921fddb7 ] xdp_master_redirect() dereferences the result of netdev_master_upper_dev_get_rcu() without a NULL check, but that helper returns NULL when the receiving device has no upper-master adjacency. The reach guard only checks netif_is_bond_slave(). On bond slave release bond_upper_dev_unlink() drops the upper-master adjacency before clearing IFF_SLAVE, so an XDP_TX reaching xdp_master_redirect() in that window still passes netif_is_bond_slave() while master is already NULL, and faults on master->flags at offset 0xb0: BUG: kernel NULL pointer dereference, address: 00000000000000b0 RIP: 0010:xdp_master_redirect (net/core/filter.c:4432) Call Trace: xdp_master_redirect (net/core/filter.c:4432) bpf_prog_run_generic_xdp (include/net/xdp.h:700) do_xdp_generic (net/core/dev.c:5608) __netif_receive_skb_one_core (net/core/dev.c:6204) process_backlog (net/core/dev.c:6319) __napi_poll (net/core/dev.c:7729) net_rx_action (net/core/dev.c:7792) handle_softirqs (kernel/softirq.c:622) __dev_queue_xmit (include/linux/bottom_half.h:33) packet_sendmsg (net/packet/af_packet.c:3082) __sys_sendto (net/socket.c:2252) Kernel panic - not syncing: Fatal exception in interrupt The missing check dates back to the original code; commit 1921f91298d1 ("net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master") later added the master->flags read where the fault now lands but kept the unconditional deref. Check master for NULL before use; a NULL master is treated the same as one that is not up. Fixes: 879af96ffd72 ("net, core: Add support for XDP redirection to slave device") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Jiayuan Chen Link: https://patch.msgid.link/20260620201531.180123-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit dcb638b472b7daf7534ee8e47cbada461703364e Author: Krzysztof Wilczyński Date: Fri May 8 04:35:33 2026 +0000 alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs [ Upstream commit 802a3b3f470b9bc1148f26e01fc9cbfeb4dfcb57 ] Currently, __pci_mmap_fits() computes the BAR size using "pci_resource_len() - 1", which wraps to a large value when the BAR length is zero, causing the bounds check to incorrectly succeed. Add an early return for empty resources. Fixes: 10a0ef39fbd1 ("PCI/alpha: pci sysfs resources") Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Tested-by: Magnus Lindholm Tested-by: Shivaprasad G Bhat Reviewed-by: Ilpo Järvinen Acked-by: Magnus Lindholm Link: https://patch.msgid.link/20260508043543.217179-15-kwilczynski@kernel.org Signed-off-by: Sasha Levin commit ed2cd1fee0ed16a1c2dff49175e65c641eb8ae2b Author: Krzysztof Wilczyński Date: Fri May 8 04:35:30 2026 +0000 alpha/PCI: Add security_locked_down() check to pci_mmap_resource() [ Upstream commit 78a228f0aa0e9eba31955950c8a40a9945e2c8bb ] Currently, Alpha's pci_mmap_resource() does not check security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap PCI BARs. The generic version has had this check since commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") to prevent DMA attacks when the kernel is locked down. Add the same check to Alpha's pci_mmap_resource(). Fixes: eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Tested-by: Magnus Lindholm Tested-by: Shivaprasad G Bhat Reviewed-by: Ilpo Järvinen Acked-by: Magnus Lindholm Link: https://patch.msgid.link/20260508043543.217179-12-kwilczynski@kernel.org Signed-off-by: Sasha Levin commit 7148d63ee73f846ffcd65edf8108d0dbc650c219 Author: Koichiro Den Date: Wed May 13 11:49:20 2026 +0900 NTB: epf: Make db_valid_mask cover only real doorbell bits [ Upstream commit 6eb7e28f1f24a28234add38755687a7ed8bc2654 ] ndev->db_count includes an unused doorbell slot due to the legacy extra offset in the peer doorbell path. db_valid_mask must cover only the real doorbell bits and exclude the unused slot. Set db_valid_mask to BIT_ULL(db_count - 1) - 1. Fixes: 812ce2f8d14e ("NTB: Add support for EPF PCI Non-Transparent Bridge") Signed-off-by: Koichiro Den Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Frank Li Reviewed-by: Dave Jiang Link: https://patch.msgid.link/20260513024923.451765-10-den@valinux.co.jp Signed-off-by: Sasha Levin commit 4d4e9686fbaf52e5843584f486e28347075e7b1e Author: Runyu Xiao Date: Thu Jun 11 12:21:20 2026 +0800 netfilter: nft_synproxy: stop bypassing the priv->info snapshot [ Upstream commit 11d4bc4e26fb66040a5b5d95e9abf37deac2b1fc ] nft_synproxy_eval_v4() and nft_synproxy_eval_v6() already take a whole-object READ_ONCE() snapshot of the shared priv->info state before building the SYNACK reply, but nft_synproxy_tcp_options() still masks opts->options with priv->info.options from the live shared object. When a named synproxy object is updated concurrently with SYN traffic, the eval path can then mix mss and timestamp handling from the local snapshot with an options mask taken from a newer configuration, so one SYNACK no longer reflects a coherent synproxy configuration. Use info->options so nft_synproxy_tcp_options() stays on the same local snapshot that the eval path already copied from priv->info. Fixes: ee394f96ad75 ("netfilter: nft_synproxy: add synproxy stateful object support") Signed-off-by: Runyu Xiao Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit cbe2d14a7c5b1fc71821fbfee5c4963917411e92 Author: Fernando Fernandez Mancera Date: Thu May 14 16:16:28 2026 +0200 netfilter: nf_conncount: prevent connlimit drops for early confirmed ct [ Upstream commit c8b6f36f766991e3ebebec6596daee4b04dcbc49 ] Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. Fixes: 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") Reported-by: Alejandro Olivan Alvarez Closes: https://lore.kernel.org/netfilter-devel/177349610461.3071718.4083978280323144323@eldamar.lan/ Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 5ae18d87a45698e8244d0fcba64c658c35a7dd3d Author: Kuniyuki Iwashima Date: Fri Jun 19 21:27:20 2026 +0000 ipv4: fib: Don't ignore error route in local/main tables. [ Upstream commit b72f0db64205d9ce462038ba995d5d31eff32dc1 ] When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added, fib_lookup() performs route lookup directly on two tables. Since the first lookup does not properly bail out, the result of an error route in the merged local/main table could be overwritten by another route in the default table: # unshare -n # ip link set lo up # ip route add 192.168.0.0/24 dev lo table 253 # ip route add unreachable 192.168.0.0/24 # ip route get 192.168.0.1 192.168.0.1 dev lo table default uid 0 cache Once a random rule is added, the error route is respected: # ip rule add table 0 # ip rule del table 0 # ip route get 192.168.0.1 RTNETLINK answers: No route to host Let's fix the inconsistent behaviour. Fixes: f4530fa574df ("ipv4: Avoid overhead when no custom FIB rules are installed.") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260619212753.3367244-1-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1451deca9896957159f0666520a792c1b861af4f Author: Xiang Mei Date: Thu Jun 18 21:53:34 2026 -0700 ipv6: Fix null-ptr-deref in fib6_nh_mtu_change(). [ Upstream commit 46c3b8191aad3d032776bf3bebf03efdf5f4b905 ] fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown() clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(), but this re-fetch is unguarded; nexthop-backed routes survive addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is nulled. Return 0 when idev is NULL, matching rt6_mtu_change_route() and the fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in fib6_mtu()."). Oops: general protection fault, ... KASAN: null-ptr-deref in range [0x00000000000002a8-0x00000000000002af] RIP: 0010:fib6_nh_mtu_change+0x203/0x990 rt6_mtu_change_route+0x141/0x1d0 __fib6_clean_all+0xd0/0x160 rt6_mtu_change+0xb4/0x100 ndisc_router_discovery+0x24b5/0x2cb0 icmpv6_rcv+0x12e9/0x1710 ipv6_rcv+0x39b/0x410 Fixes: c0b220cf7d80 ("ipv6: Refactor exception functions") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Reviewed-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260619045334.2427073-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c7bef84740d1d57848c74f6f5b996606e43ea4fe Author: Gil Portnoy Date: Fri Jun 19 08:25:46 2026 +0900 ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE [ Upstream commit 0c054227479ed7e36ebccb3a558bc0ef698264f6 ] conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O). Fixes: aa7253c2393f ("ksmbd: fix memory leak in smb2_handle_negotiate") Signed-off-by: Gil Portnoy Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin commit fd9de48ee0ca6c13bbd6f586484362dbe5c4e1a4 Author: Manivannan Sadhasivam Date: Tue Apr 7 18:14:21 2026 +0530 PCI: endpoint: pci-epf-ntb: Add check to detect 'db_count' value of 0 [ Upstream commit d1db6d7c2485ee475a04d8354fbb5b26ea10d978 ] epf_ntb->db_count value should be within 1 to MAX_DB_COUNT. Current code only checks for the upper bound, while the lower bound is unchecked. This can cause a lot of issues in the driver if the user passes 'db_count' as 0. Add a check for 0 also. While at it, remove the redundant 'db_count' variable from epf_ntb_configure_interrupt(). Fixes: 8b821cf76150 ("PCI: endpoint: Add EP function driver to provide NTB functionality") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20260407124421.282766-3-mani@kernel.org Signed-off-by: Sasha Levin commit 4588bb462da8081055b0ed211a8c1624b9014e68 Author: Manivannan Sadhasivam Date: Tue Apr 7 18:14:20 2026 +0530 PCI: endpoint: pci-epf-vntb: Add check to detect 'db_count' value of 0 [ Upstream commit 33bd1ea748bc897c4d13437284e08c658e8d1340 ] epf_ntb->db_count value should be within 1 to MAX_DB_COUNT. Current code only checks for the upper bound, while the lower bound is unchecked. This can cause a lot of issues in the driver if the user passes 'db_count' as 0. Add a check for 0 also. While at it, remove the redundant 'db_count' assignment. Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Koichiro Den Reviewed-by: Frank Li Link: https://patch.msgid.link/20260407124421.282766-2-mani@kernel.org Signed-off-by: Sasha Levin commit 9acd5c1ddc17ca4c5ffa0c373e3fdf480506e061 Author: Xiang Mei Date: Mon Jun 15 11:47:37 2026 -0700 drm/edid: fix OOB read in drm_parse_tiled_block() [ Upstream commit faaa1e1155833e7d4ce7e3cfaf64c0d636b190db ] drm_parse_tiled_block() casts the DisplayID block to a struct displayid_tiled_block and reads the full fixed layout up to tile->topology_id[7] without checking block->num_bytes. The DisplayID iterator only validates the declared payload length, so a crafted EDID can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at the end of a DisplayID extension. The read then runs past the end of the exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read. Reject blocks shorter than the spec's 22-byte tiled payload before reading the fixed struct, as drm_parse_vesa_mso_data() already does. BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update Read of size 2 at addr ffff888010077700 by task exploit/147 dump_stack_lvl (lib/dump_stack.c:94 ...) print_report (mm/kasan/report.c:378 ...) kasan_report (mm/kasan/report.c:595) drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581) bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574) drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426) status_store (drivers/gpu/drm/drm_sysfs.c:219) ... vfs_write (fs/read_write.c:595 fs/read_write.c:688) ksys_write (fs/read_write.c:740) Fixes: 40d9b043a89e ("drm/connector: store tile information from displayid (v3)") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Reviewed-by: Jani Nikula Link: https://patch.msgid.link/20260615184737.899892-1-xmei5@asu.edu Signed-off-by: Jani Nikula Signed-off-by: Sasha Levin commit 62dbf11753a67150da4e506910cb4aaf8eedceb9 Author: Avinash Duduskar Date: Thu Jun 18 04:17:19 2026 +0530 bpf: zero-initialize the fib lookup flow struct [ Upstream commit 0dfcb68a6a5ac517b22dff6a1f01cb4f126dfc57 ] bpf_ipv4_fib_lookup() and bpf_ipv6_fib_lookup() build the flow key on the stack with a bare "struct flowi4 fl4;" / "struct flowi6 fl6;" and fill it field by field, but never set flowi4_l3mdev / flowi6_l3mdev. On the non-DIRECT path the lookup goes through the fib rules whenever the netns has custom rules, which a VRF installs: bpf_ipv4_fib_lookup() -> fib_lookup() -> __fib_lookup() -> l3mdev_update_flow() reads !fl->flowi_l3mdev -> fib_rules_lookup() -> fib_rule_match() -> l3mdev_fib_rule_match() uses fl->flowi_l3mdev l3mdev_update_flow() resolves the l3mdev master from the ingress device only while the field is still zero. Left at a nonzero stack value the resolution is skipped, and l3mdev_fib_rule_match() then tests that value as an ifindex, so the VRF master is not resolved and the rule fails to match: an ingress enslaved to a VRF can fail to select its table. FIB rules matching on an L3 master device (l3mdev_fib_rule_iif_match()/ _oif_match()) read the same value, so an "ip rule iif/oif " mismatches the same way. Zero-initialize the whole flow struct rather than adding one more field assignment, so any flowi field added later is covered too. ip_route_input_slow() likewise zeroes the field before its input lookup. CONFIG_INIT_STACK_ALL_ZERO masks this by default, but it depends on compiler support (CC_HAS_AUTO_VAR_INIT_ZERO), so INIT_STACK_NONE builds, including older toolchains that fall back to it, are exposed. Built with INIT_STACK_ALL_PATTERN, a plain bpf_fib_lookup (no VLAN, no DIRECT) over a VRF slave whose destination is routed only in the VRF table returns BPF_FIB_LKUP_RET_NOT_FWDED, and resolves with this patch. On the default config the lookup succeeds either way, so ordinary testing does not catch the bug. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Signed-off-by: Avinash Duduskar Reviewed-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/20260617224719.1428599-1-avinash.duduskar@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit a71eb8f730a91271cf47ce291e785b6b7e54622f Author: Nuoqi Gui Date: Thu Jun 18 01:50:26 2026 +0800 bpf: Fix stack slot index in nospec checks [ Upstream commit d1d53aa30ab3b5ae89161c9cc840b3f7489ad386 ] check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. Fixes: 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") Acked-by: Luis Gerhorst Reviewed-by: Jiayuan Chen Reviewed-by: Emil Tsalapatis Signed-off-by: Nuoqi Gui Link: https://lore.kernel.org/r/20260618-f01-11-stack-nospec-slot-index-v3-1-780297041721@mails.tsinghua.edu.cn Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 881a0ef8020101ec3baef9c404e552605c5d268c Author: Ronan Dalton Date: Fri May 8 15:24:49 2026 +1200 rtc: ds1307: handle oscillator stop flag for ds1337/ds1339/ds3231 [ Upstream commit a091e1ba3b68cabc9caedafc6f81d9fe9b3b2200 ] Prior to commit 48458654659c ("rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe"), the oscillator stop flag (OSF) bit was checked during device probe for the ds1337, ds1339, ds1341, and ds3231 chips; if it was set, it would be cleared and a warning would be logged saying "SET TIME!". Since that commit, the OSF bit is no longer cleared, but the warning is still printed. Directly following that commit, there was no way to get rid of this warning because nothing cleared the OSF bit on these chips. The commit associated with the previous commit, 523923cfd5d6 ("rtc: ds1307: handle oscillator stop flag (OSF) for ds1341"), made proper use of the OSF when getting and setting the time in the RTC. However, the other RTC variants ds1337, ds1339 and ds3231 didn't have a corresponding change made. Given that the OSF bit is no longer cleared at probe time when it is set, the remaining three chips should have the same handling as the ds1341 chip has for the OSF bit. Fix the issue on the ds1337, ds1339 and ds3231 chips by applying the same logic as the ds1341 has to these chips. Note that any devices brought up between the first referenced commit and this one may begin mistrusting the time reported by the RTC until it is set again, if the bit was never explicitly cleared. Note that only the ds1339 was tested with this change, but the datasheets for the other chips contain essentially identical descriptions of the OSF bit so the same change should work. Signed-off-by: Ronan Dalton Cc: linux-rtc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Alexandre Belloni Cc: Tyler Hicks Cc: Sasha Levin Cc: Meagan Lloyd Cc: Rodolfo Giometti Cc: Chris Packham Fixes: 48458654659c ("rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe") Reviewed-by: Meagan Lloyd Reviewed-by: Tyler Hicks Link: https://patch.msgid.link/20260508032518.3696705-2-ronan.dalton@alliedtelesis.co.nz Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 6b8233635ce85b9f50437c273a833a56a473eec2 Author: Antoni Pokusinski Date: Wed Apr 15 18:06:11 2026 +0200 rtc: abx80x: fix the RTC_VL_CLR clearing all status flags [ Upstream commit 419719c514252a2dbb2e2976f564c83417dd6d0a ] The RTC_VL_CLR ioctl intends to clear only the battery low flag (BLF), however the current implementation writes 0 to the status register, clearing all status bits. Fix this by writing back the masked status value so that only BLF is cleared, preserving other status flags. Fixes: ffe1c5a2d427 ("rtc: abx80x: Implement RTC_VL_READ,CLR ioctls") Signed-off-by: Antoni Pokusinski Link: https://patch.msgid.link/20260415160610.127155-2-apokusinski01@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit 5d1fafcc335be25f97ebf1580fe16bbeadfa7cfd Author: Aboorva Devarajan Date: Thu Jun 11 09:11:02 2026 +0530 selftests/mm: fix exclusive_cow test fork() handling [ Upstream commit cea5702144615878600d3a39b5d8b3cc34719012 ] The test ignores the return value of fork(), so both the parent and the (newly created) child run the COW verification loops and then call hmm_buffer_free() before returning into the kselftest harness, which _exit()s each side. This duplicated teardown sequence has been observed to manifest as a SIGSEGV in the test child, e.g.: hmm-tests[360141]: segfault (11) at 0 nip 10006964 lr 1000ac3c code 1 in hmm-tests[6964,10000000+30000] Fix this by adopting the same fork()-then-wait pattern already used by the nearby anon_write_child / anon_write_child_shared tests in this file: the child performs the COW verification and then _exit(0)s so it does not run the test teardown, while the parent independently verifies COW, waits for the child, and only then frees the buffer. Link: https://lore.kernel.org/20260611034102.1030738-4-aboorvad@linux.ibm.com Fixes: b659baea75469 ("mm: selftests for exclusive device memory") Signed-off-by: Aboorva Devarajan Cc: Alex Sierra Cc: Alistair Popple Cc: Balbir Singh Cc: David Hildenbrand Cc: Jason Gunthorpe Cc: Leon Romanovsky Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Matthew Brost Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Mike Rapoport Cc: Ralph Campbell Cc: Sayali Patil Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 9753df357b867429fe4c50c641393b71ccdfec64 Author: Sayali Patil Date: Thu Jun 11 09:11:00 2026 +0530 selftests/mm: allow PUD-level entries in compound testcase of hmm tests [ Upstream commit 224ed0e019b122d08580362abe57574a78f2b5fa ] Patch series "selftests/mm: assorted fixes for hmm-tests", v3. This series fixes a few issues in hmm-tests that show up when page-size and huge-page configuration differ from the hardcoded assumptions the tests were written for (PMD/THP sizing, default hugepage size, and related cases). It also includes a fix to exclusive_cow: the test ignored the return value of fork(), so both parent and child ran the same teardown path. This patch (of 3): The HMM compound testcase currently assumes only PMD-level mappings and fails on systems where default_hugepagesz=1G is set, because the region is then reported by the device at PUD level. Determine the mapping level (PMD or PUD) the device reports for the first page of the range and require every page to match that level exactly via ASSERT_EQ(). This accepts PUD-level mappings while preserving the expected/observed protection values printed on failure, and rejects a fragmented mapping that mixes PMD- and PUD-level entries within the same range (which a per-page OR check would have let pass). Link: https://lore.kernel.org/20260611034102.1030738-1-aboorvad@linux.ibm.com Link: https://lore.kernel.org/20260611034102.1030738-2-aboorvad@linux.ibm.com Fixes: e478425bec93 ("mm/hmm: add tests for hmm_pfn_to_map_order()") Signed-off-by: Sayali Patil Co-developed-by: Aboorva Devarajan Signed-off-by: Aboorva Devarajan Cc: Alex Sierra Cc: Alistair Popple Cc: Balbir Singh Cc: David Hildenbrand Cc: Jason Gunthorpe Cc: Leon Romanovsky Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Matthew Brost Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Mike Rapoport Cc: Ralph Campbell Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit dc9834aac8fd8e17f51c4b22f1e944079d1f79ab Author: Sayali Patil Date: Thu May 21 12:17:53 2026 +0530 selftests/mm: clarify alternate unmapping in compaction_test [ Upstream commit 69ba1d76d93ab818245333cf400928477ba72053 ] Add a comment explaining that every other entry in the list is unmapped to intentionally create fragmentation with locked pages before invoking check_compaction(). Link: https://lore.kernel.org/da5e0a8d5152e54152c0d2f456aac2fac35af291.1779296493.git.sayalip@linux.ibm.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Sayali Patil Tested-by: Venkat Rao Bagalkote Cc: David Hildenbrand (Arm) Cc: Dev Jain Cc: Liam Howlett Cc: Miaohe Lin Cc: Michal Hocko Cc: Oscar Salvador Cc: "Ritesh Harjani (IBM)" Cc: Shuah Khan Cc: Zi Yan Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit d1678d0816076d6887d7e5f6b52475e080209181 Author: Bhargav Joshi Date: Sat Jun 20 17:39:17 2026 +0530 irqchip/crossbar: Fix parent domain resource leak [ Upstream commit a1074dd62faa6572921d387e8a21589ccea00efc ] irq_domain_alloc_irqs_parent() is called in allocate_gic_irq() but irq_domain_free_irqs_parent() is never called which causes a resource leak. Fix this by calling irq_domain_free_irqs_parent() in crossbar_domain_free(). Fixes: 783d31863fb82 ("irqchip: crossbar: Convert dra7 crossbar to stacked domains") Signed-off-by: Bhargav Joshi Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260620-irq-crossbar-fix-v2-2-b8e8499f468a@gmail.com Signed-off-by: Sasha Levin commit a853c3769b73ceb2d2b735aff621d1d51fe0553d Author: Florian Westphal Date: Fri Jun 19 00:34:49 2026 +0200 netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak [ Upstream commit 27dd2997746d54ebc079bb13161cc1bdd401d4a6 ] This needs to test for nonzero retval. Fixes: c54c7c685494 ("netfilter: nft_meta_bridge: add NFT_META_BRI_IIFPVID support") Closes: https://sashiko.dev/#/patchset/20260618061631.21919-1-fw%40strlen.de Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 392baa440e8a84bc57d357e7de2c74222d7320dd Author: Florian Westphal Date: Thu Jun 18 10:49:24 2026 +0200 netfilter: nf_reject: skip iphdr options when looking for icmp header [ Upstream commit af8d6ae09c0a5f8b8a0d5680203c74b3c1daa85b ] Not a big deal but this hould have used the real ip header length and not the base header size. As-is, if there are options then nf_skb_is_icmp_unreach() result will be random. Fixes: db99b2f2b3e2 ("netfilter: nf_reject: don't reply to icmp error messages") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 6e98407cb94e035bba98956adc9096a76d8b2a9f Author: Jozsef Kadlecsik Date: Wed Jun 17 10:41:24 2026 +0200 netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer() [ Upstream commit 3ca9982a8882470aa0ac4e8bb9a552b181d1efcd ] Sashiko pointed out that kfree_rcu() was called before rcu_assign_pointer() in handling the comment extension. Fix the order so that rcu_assign_pointer() called first. Fixes: b57b2d1fa53f ("netfilter: ipset: Prepare the ipset core to use RCU at set level") Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 09cfe665f2c5d7a8a5ed4d6b487434a011325368 Author: Aleksandr Nogikh Date: Wed May 27 20:18:18 2026 +0000 ieee802154: fix kernel-infoleak in dgram_recvmsg() [ Upstream commit 4db86f8ab11b5a41bfc36680be837e6ac1375ec6 ] KMSAN reported a kernel-infoleak in move_addr_to_user(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:131 [inline] BUG: KMSAN: kernel-infoleak in _inline_copy_to_user include/linux/uaccess.h:205 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120 lib/usercopy.c:26 instrument_copy_to_user include/linux/instrumented.h:131 [inline] _inline_copy_to_user include/linux/uaccess.h:205 [inline] _copy_to_user+0xcc/0x120 lib/usercopy.c:26 copy_to_user include/linux/uaccess.h:236 [inline] move_addr_to_user+0x2e7/0x440 net/socket.c:302 ____sys_recvmsg+0x232/0x610 net/socket.c:2925 ... Uninit was stored to memory at: ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline] dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739 The issue occurs because the `pan_id` field of `struct ieee802154_addr` is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`. The execution flow is as follows: 1. `__ieee802154_rx_handle_packet()` declares a local `struct ieee802154_hdr hdr` on the stack. 2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse the source and destination addresses into this structure. 3. If the address mode is `IEEE802154_ADDR_NONE`, `ieee802154_hdr_get_addr()` previously only set the `mode` field, leaving the `pan_id` field containing uninitialized stack memory. 4. This uninitialized `pan_id` is later copied into a `struct sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`. 5. Finally, `move_addr_to_user()` copies the socket address structure to user space, leaking the uninitialized bytes. Fix this by using `memset` to zero out the address structure in `ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. Fixes: 94b4f6c21cf5 ("ieee802154: add header structs with endiannes and operations") Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot Reported-by: syzbot+346474e3bf0b26bd3090@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=346474e3bf0b26bd3090 Link: https://syzkaller.appspot.com/ai_job?id=a507a109-d683-4a2c-bc03-93394f491b17 Signed-off-by: Aleksandr Nogikh Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/62795fd9-fc0c-48eb-bb82-05ffc5a57104@mail.kernel.org Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin commit d2a58f38dd49f1f3cc36cda2bbd61db2fe8e8e81 Author: Ivan Abramov Date: Thu Apr 3 13:19:34 2025 +0300 ieee802154: Remove WARN_ON() in cfg802154_pernet_exit() [ Upstream commit e69ed6fc9fb3b386b5fcdb9f51623f122cee2ebd ] There's no need to call WARN_ON() in cfg802154_pernet_exit(), since every point of failure in cfg802154_switch_netns() is covered with WARN_ON(), so remove it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 66e5c2672cd1 ("ieee802154: add netns support") Reviewed-by: Miquel Raynal Signed-off-by: Ivan Abramov Link: https://lore.kernel.org/20250403101935.991385-4-i.abramov@mt-integration.ru Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin commit 2c44156655b63bc8f6219eea2cc562bee694d0be Author: Andy Shevchenko Date: Wed Jun 17 11:05:55 2026 +0200 ACPI: resource: Amend kernel-doc style [ Upstream commit 78ad5c7722b7bed9d35ffc5b45eb0f12e2c22fee ] The functions are referred as func() in the kernel-doc. The % (percent) character makes the rendering for constants as described in the respective documentation. Amend all these. Fixes: 8e345c991c8c ("ACPI: Centralized processing of ACPI device resources") Signed-off-by: Andy Shevchenko Link: https://patch.msgid.link/20260617090555.2648709-1-andriy.shevchenko@linux.intel.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit b0a7327aa230fd47dc2b586c002e4bb8a548fc1b Author: Ricardo Neri Date: Sat Jun 13 15:17:47 2026 -0700 thermal: intel: Fix dangling resources on thermal_throttle_online() failure [ Upstream commit b91d287fa7a1ba0727eed5823c6ee4924ee5fa31 ] The function thermal_throttle_add_dev() may fail and abort a CPU hotplug online operation. Since the failure occurs within the online callback, thermal_throttle_online(), the CPU hotplug framework does not invoke the corresponding offline callback. As a result, the hardware and software resources set up during the failed operation are not torn down. Since only thermal_throttle_add_dev() can fail, call it before setting up the rest of the resources. Fixes: f6656208f04e ("x86/mce/therm_throt: Optimize notifications of thermal throttle") Signed-off-by: Ricardo Neri Link: https://patch.msgid.link/20260613-rneri-directed-therm-intr-v3-1-3a26d1e47fc8@linux.intel.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 45a94fd8998df81e2dd7d0709646e1c868b222e8 Author: Breno Leitao Date: Tue Jun 9 06:15:53 2026 -0700 arm64/hw_breakpoint: reject unaligned watchpoints that would truncate BAS [ Upstream commit 4cc70f75853bebac022334b6a86b953348072f74 ] hw_breakpoint_arch_parse() positions the BAS bit pattern in hw->ctrl.len with offset = hw->address & alignment_mask; /* 0..7 */ hw->ctrl.len <<= offset; ctrl.len is an 8-bit bitfield (struct arch_hw_breakpoint_ctrl::len is u32 :8), so the shift silently drops any bits past bit 7. For non-compat AArch64 watchpoints the offset is unbounded relative to ctrl.len: a perf_event_open(PERF_TYPE_BREAKPOINT) caller asking for HW_BREAKPOINT_W with bp_addr=page+1 and bp_len=HW_BREAKPOINT_LEN_8 ends up with 0xff << 1 = 0x1fe, stored as 0xfe. The kernel programs WCR.BAS=0xfe and the hardware watches bytes [1..7] instead of the requested [1..8] -- the eighth byte is silently dropped. The syscall still returns success, leaving userspace to discover the gap by empirical probing. The same class affects HW_BREAKPOINT_LEN_{2,4} when offset pushes the high BAS bit past bit 7 (e.g. LEN_4 with offset=5 yields 0xe0 instead of 0x1e0). No memory-safety impact -- the value is masked into 8 bits before encoding -- but debuggers and perf users observe missed events on bytes they thought they were watching. The AArch32 branch immediately above already rejects unrepresentable (offset, len) combinations via an explicit switch. Mirror that for the non-compat branch by checking that the shifted pattern fits in the BAS field, returning -EINVAL when it does not. GDB and similar debuggers are unaffected by the stricter check. aarch64_linux_set_debug_regs() already treats EINVAL on NT_ARM_HW_WATCH as a downgrade signal: it clears kernel_supports_any_contiguous_range, calls aarch64_downgrade_regs() to round the BAS up to a legacy 0x01/03/0f/ff mask with an aligned base, and retries -- the same fallback path that PR-20207 introduced. The new -EINVAL is therefore reachable only from a raw perf_event_open() that pairs an unaligned base with an oversized bp_len, which is precisely the bug. Reproducer: struct perf_event_attr a = { .type = PERF_TYPE_BREAKPOINT, .size = sizeof(a), .bp_type = HW_BREAKPOINT_W, .bp_addr = (uintptr_t)(buf + 1), .bp_len = HW_BREAKPOINT_LEN_8, .exclude_kernel = 1, .exclude_hv = 1, }; int fd = perf_event_open(&a, 0, -1, -1, 0); /* before this fix: succeeds, watches 7 bytes (buf+1..buf+7) */ /* after this fix: fails with EINVAL */ Fixes: b08fb180bb88 ("arm64: Allow hw watchpoint at varied offset from base address") Signed-off-by: Breno Leitao Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit e14ba0cae367a012a3a4569bb48eb199c18092bf Author: Ioana Ciornei Date: Tue Jun 16 13:54:30 2026 +0300 dpaa2-switch: fix VLAN upper check not rejecting bridge join [ Upstream commit ed2294f94e34e97342850c40b320833d881c3819 ] The blamed commit refactored the prechangeupper event handling but failed to actually return an error in case dpaa2_switch_prevent_bridging_with_8021q_upper() detected a 802.1q upper on a port which tries to join a bridge. Fix this by returning err instead of 0. Fixes: 45035febc495 ("net: dpaa2-switch: refactor prechangeupper sanity checks") Signed-off-by: Ioana Ciornei Link: https://patch.msgid.link/20260616105430.3725910-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8b38e3dcfde3077dbc03eb8ef88e03cc19f70b8a Author: Xin Long Date: Mon Jun 15 15:36:30 2026 -0400 sctp: hold socket lock when dumping endpoints in sctp_diag [ Upstream commit 7d8297e26b4e20b5d1c3c3fe51fe81a1c7fbc823 ] SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing address list access during dump - Reworking sctp_for_each_endpoint() to support restart-based traversal with (net, pos) tracking Also: - Add WARN_ON_ONCE() for inconsistent address counts - Fix idiag_states filtering for LISTEN vs association cases - Skip dumping endpoints being freed (ep->base.dead) - Move dump position tracking into iterator, removing cb->args[4] and its comment for sctp_ep_dump()., - Update the comment for cb->args[4] and remove the comment for unused cb->args[5] for sctp_sock_dump(). Note: traversal is restart-based and may re-scan buckets multiple times, but this is acceptable due to small bucket sizes and required to support sleeping-safe callbacks. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative. Reported-by: Zero Day Initiative Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long Link: https://patch.msgid.link/4c1b49ab87e0f7d552ebd8172b364b1994e913c9.1781552190.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7fe7e6949964aa8ee6305f09db2dc9eede977bb3 Author: Jakub Kicinski Date: Mon Jun 15 17:30:46 2026 -0700 net: psample: fix info leak in PSAMPLE_ATTR_DATA [ Upstream commit aedd02af1f8b0bceb7f42f5a21c41634ca9ed390 ] psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling") Reported-by: Weiming Shi Reviewed-by: Jiri Pirko Link: https://patch.msgid.link/20260616003046.1099490-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e68ada66afcae0bc2a7c06b43c5a9a081d29e7b4 Author: Ratheesh Kannoth Date: Mon Jun 15 08:37:04 2026 +0530 octeontx2-pf: Fix leak of SQ timestamp buffer on teardown [ Upstream commit a056db30de92945ff8ee6033096678bfbae878e3 ] The send-queue timestamp ring is allocated with qmem_alloc() when timestamping is used, but otx2_free_sq_res() never freed sq->timestamps, leaking that memory across ifdown and device removal. Add the missing qmem_free() alongside the other SQ companion buffers. Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock") Cc: Aleksey Makarov Signed-off-by: Ratheesh Kannoth Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260615030704.504536-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bd7f202cf77556cff59f68dc30e4cdf40cb6e33b Author: Eric Dumazet Date: Mon Jun 15 09:02:37 2026 +0000 xfrm: validate selector family and prefixlen during match [ Upstream commit 40f0b1047918539f0b0f795ac65e35336b4c2c78 ] syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow). Fixes: 3f0ab59e6537 ("xfrm: validate new SA's prefixlen using SA family when sel.family is unset") Reported-by: syzbot+9383b1ff0df4b29ca5e6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a2fbe35.be3f099c.2836ae.0018.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit 131023a447f130a2acb9c1b27528c5b1a373de44 Author: Pengpeng Hou Date: Mon Jun 15 13:58:50 2026 +0800 sparc: led: avoid trimming a newline from empty writes [ Upstream commit 7eb475e8a738ee6fd1260aa59ddccb610fdd4300 ] led_proc_write() duplicates up to LED_MAX_LENGTH bytes with memdup_user_nul() and then unconditionally inspects buf[count - 1] to strip a trailing newline. A zero-length write therefore reads one byte before the duplicated buffer. The previous version rejected empty writes, but empty input already falls through to the existing default case and turns the LED off like any other unrecognized string. Preserve that behavior and only skip the newline trim when there is no input byte to inspect. Fixes: ee1858d3122d ("[SPARC]: Add sun4m LED driver.") Suggested-by: Andreas Larsson Signed-off-by: Pengpeng Hou Signed-off-by: Andreas Larsson Signed-off-by: Sasha Levin commit 4c011ed8a2beccb8be58c5197dfc670beaea569d Author: John Johansen Date: Sun Jun 14 16:16:59 2026 -0700 apparmor: fix label can not be immediately before a declaration [ Upstream commit 1ed40bd525c00d22af666016af9aef7167f8085f ] Fix error reported by kernel test robot security/apparmor/policy.c:1381:2: error: a label can only be part of a statement and a declaration is not a statement All errors (new ones prefixed by >>): security/apparmor/policy.c: In function 'aa_replace_profiles': >> security/apparmor/policy.c:1381:2: error: a label can only be part of a statement and a declaration is not a statement ssize_t udata_sz = udata->size; ^~~~~ Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202606150525.npax8WiH-lkp@intel.com/ Fixes: 7b42f95813dc9 ("apparmor: fix potential UAF in aa_replace_profiles") Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit ff23a7fae9f3010f31638d741673fa9aff331eca Author: Adrian Hunter Date: Fri Jun 12 11:01:03 2026 +0300 i3c: master: Prevent reuse of dynamic address on device add failure [ Upstream commit b3ba8383da4d0cff15810e32ea785eceb0a80813 ] i3c_master_add_i3c_dev_locked() is called after a device has already been assigned a dynamic address. If the function fails, the address remains marked as free and may be reallocated to another device, leading to address conflicts on the bus. Ensure the address is not marked as free on failure, by updating the address slot state to prevent the address from being re-used. Emit an error message to inform of the failure. Opportunistically remove the !master check because it is impossible. Note, directly resetting the device's dynamic address is no longer an option, since Direct RSTDAA was deprecated from I3C starting from version 1.1 and v1.1 (or later) target devices are meant to NACK it. Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure") Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260612080107.11606-4-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit abf908d5cc5b717a4f7b9df1413f33bf8c383684 Author: Zygmunt Krynicki Date: Tue May 5 05:40:53 2026 +0200 apparmor: put secmark label after secid lookup [ Upstream commit 340372688bb87da45ff8d4e2f82ccfd1b64c65ff ] apparmor_secmark_init() parses a configured secmark label to obtain its secid. aa_label_strn_parse() returns a refcounted label, but the success path kept that reference after copying the secid. Fixes: ab9f2115081a ("apparmor: Allow filtering based on secmark policy") Signed-off-by: Zygmunt Krynicki Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit 39398f0af7e7c53d89a65026fbeac696fbeb005a Author: Zygmunt Krynicki Date: Sat May 2 13:37:14 2026 +0200 apparmor: aa_getprocattr free procattr leak on format failure [ Upstream commit fea23bf73f0cae8ccb1d0684e4a3003874771f41 ] aa_getprocattr() allocates the output string before rendering the label into it. If the second aa_label_snxprint() call fails, the function returned without freeing that allocation. Free and clear the output pointer on the uncommon formatting failure path before dropping the namespace reference. Fixes: 76a1d263aba3 ("apparmor: switch getprocattr to using label_print fns()") Reviewed-by: Tyler Hicks Reviewed-by: Ryan Lee Signed-off-by: Zygmunt Krynicki Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit 9d37dc6376e336dc4b4f39a7ad0d069aa70e9495 Author: Maxime Bélair Date: Wed Feb 18 10:27:34 2026 +0100 apparmor: fix potential UAF in aa_replace_profiles [ Upstream commit 7b42f95813dc9ceb6bda35afcf914630909a19f9 ] The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference. Fixes: 5ac8c355ae001 ("apparmor: allow introspecting the loaded policy pre internal transform") Reviewed-by: Georgia Garcia Signed-off-by: Maxime Bélair Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit 65f95c1e7ce70bf339504e22473879e02026cfc4 Author: Ryan Lee Date: Fri Feb 13 11:29:38 2026 -0800 apparmor: grab ns lock and refresh when looking up changehat child profiles [ Upstream commit 32e92764d6f8d251c1bca62be33793287b453a81 ] There was a race condition involving change_hat and profile replacement in which replacement of the parent profile during a changehat operation could result in the list of children becoming empty and the changehat operation failing. To prevent this: - grab the namespace lock until we've built the hat transition, and - use aa_get_newest_profile to avoid using stale profile objects. Link: https://bugs.launchpad.net/bugs/2139664 Fixes: 89dbf1962aa63 ("apparmor: move change_hat mediation to using labels") Reviewed-by: Georgia Garcia Signed-off-by: Ryan Lee Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit b5a9da5d36162d34db0f36abb15420e295176793 Author: Zygmunt Krynicki Date: Sat May 2 13:21:33 2026 +0200 apparmor: aa_label_alloc use aa_label_free on alloc failure [ Upstream commit 654fe7505dc6889724d4094fa64f89991afabfc3 ] aa_label_alloc() allocates a secid before allocating or taking the label proxy. If the later proxy step fails, the error path only freed the label memory, leaking any resources initialized by aa_label_init(). Use aa_label_free() on the failure path so partially initialized labels release their secid and other label resources before the backing memory is freed. Fixes: f1bd904175e81 ("apparmor: add the base fns() for domain labels") Signed-off-by: Zygmunt Krynicki Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit cfc224866530a6842b6c2d2d30ef6a9b0e64bb9c Author: Ruoyu Wang Date: Mon Jun 8 14:36:31 2026 +0800 apparmor: check label build before no_new_privs test [ Upstream commit a58cafd38b46fb1a2220e2fbbcfe291ea75fa147 ] aa_change_profile() builds a replacement label with fn_label_build_in_scope() before the no_new_privs subset check. The build helper can fail and return NULL or an ERR_PTR, but the result was passed to aa_label_is_unconfined_subset() before the existing IS_ERR_OR_NULL() check. Reuse the existing target-label build failure handling immediately after the build. This preserves the current audit handling while preventing the subset helper from dereferencing an invalid label. Fixes: e00b02bb6ac2a ("apparmor: move change_profile mediation to using labels") Signed-off-by: Ruoyu Wang Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit 18abb3e01c30abf449647e8dc3513c3c2a83432b Author: Manivannan Sadhasivam Date: Thu May 21 17:19:49 2026 +0000 PCI: mediatek: Use actual physical address instead of virt_to_phys() [ Upstream commit ebc1d9906894703286d12306a6f242d90cfb49e8 ] The driver previously used virt_to_phys() on the ioremapped register base (port->base) to compute the MSI message address. Using virt_to_phys() on an IO mapped address is incorrect because it expects a kernel virtual address. To fix it, store the physical start of the I/O register region in mtk_pcie_port->phys_base and use it to build the MSI address. This replaces the incorrect virt_to_phys() usage and ensures MSI addresses are generated correctly. Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Tested-by: Caleb James DeLisle Link: https://patch.msgid.link/20260521171951.1495781-2-cjd@cjdns.fr Signed-off-by: Sasha Levin commit c20c51348852039e912934645b553436e23f76cb Author: Ryder Lee Date: Mon Mar 2 17:46:48 2026 -0800 PCI: mediatek: Fix possible truncation in mtk_pcie_parse_port() [ Upstream commit ab4a4043db1fcc4fd4c5745c5be8caf053502e29 ] As reported by the W=1 warning below, content of the 'name' variable might get truncated with the existing size of 10 bytes. Though it is not practically possible to exceed the 10 bytes size, increase it to 20 to silence the warning for a clean W=1 build: $ make W=1 drivers/pci/controller/pcie-mediatek.o CALL scripts/checksyscalls.sh DESCEND objtool INSTALL libsubcmd_headers CC drivers/pci/controller/pcie-mediatek.o drivers/pci/controller/pcie-mediatek.c: In function ‘mtk_pcie_parse_port’: drivers/pci/controller/pcie-mediatek.c:963:43: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 6 [-Werror=format-truncation=] 963 | snprintf(name, sizeof(name), "port%d", slot); | ^~ drivers/pci/controller/pcie-mediatek.c:963:38: note: directive argument in the range [0, 2147483647] 963 | snprintf(name, sizeof(name), "port%d", slot); | ^~~~~~~~ drivers/pci/controller/pcie-mediatek.c:963:9: note: ‘snprintf’ output between 6 and 15 bytes into a destination of size 10 963 | snprintf(name, sizeof(name), "port%d", slot); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ryder Lee [mani: commit log] Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/b835e360b42c5e0994f9301a34dbdf140a8d3ef5.1772493898.git.ryder.lee@mediatek.com Stable-dep-of: ebc1d9906894 ("PCI: mediatek: Use actual physical address instead of virt_to_phys()") Signed-off-by: Sasha Levin commit 919c9c79336a4604db6e573aa161f1bb5f232093 Author: Arnaldo Carvalho de Melo Date: Mon Jun 8 08:10:18 2026 -0300 tools lib api: Fix mount_overload() snprintf truncation and toupper range [ Upstream commit fd1f70776add263f8ef38a87ae593c75303f1dcd ] mount_overload() builds an environment variable name like "PERF_SYSFS_ENVIRONMENT" from fs->name. Two bugs: 1) snprintf() uses name_len as the buffer size instead of sizeof(upper_name). For fs->name = "sysfs" (len=5), the output is truncated to "PERF" (4 chars + null), so getenv() never finds the intended variable. 2) mem_toupper() only uppercases name_len bytes, converting just the "PERF" prefix rather than the full string including the filesystem name portion. Fix by using sizeof(upper_name) for snprintf and strlen(upper_name) for mem_toupper, so the full "PERF_SYSFS_ENVIRONMENT" string is correctly formatted and uppercased. Reported-by: sashiko-bot Fixes: 73ca85ad364769ff ("tools lib api fs: Add FSTYPE__mount() method") Cc: Jiri Olsa Assisted-by: Claude:claude-opus-4.6 Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 44de4cf2ec16734f283f6e78f3c65b6ebea580fe Author: Arnaldo Carvalho de Melo Date: Mon Jun 8 07:05:19 2026 -0300 tools lib api: Fix filename__write_int() writing uninitialized stack data [ Upstream commit 438ece06185696e14c63c6113d5e2d34ec0a9680 ] filename__write_int() formats an integer into a 64-byte buffer with sprintf() then passes sizeof(buf) (64) as the write length. This writes all 64 bytes including uninitialized stack data past the formatted string. Most sysfs files reject the oversized write, making the function always return -1. Fix by capturing the sprintf() return value and using it as the write length. Reported-by: sashiko-bot Fixes: 3b00ea938653d136 ("tools lib api fs: Add sysfs__write_int function") Cc: Kan Liang Assisted-by: Claude:claude-opus-4.6 Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 26f1d169864c5a3c4dacaa135196a8038abdeee1 Author: Arnaldo Carvalho de Melo Date: Sun Jun 7 21:03:55 2026 -0300 tools lib api: Fix missing null termination in filename__read_int/ull() [ Upstream commit 52b1f9678499b13b7aeb0186d9c6f486c043283f ] filename__read_int() passes a stack buffer to read() using the full sizeof(line) and then hands it to atoi() without null-terminating. If a sysfs file fills the 64-byte buffer exactly, atoi() reads past the array into uninitialized stack memory. filename__read_ull_base() has the same issue with strtoull(). Fix both by reading sizeof(line) - 1 bytes and explicitly null-terminating after a successful read. Fixes: 3a351127cbc682c3 ("tools lib fs: Adopt filename__read_int from tools/perf/") Reported-by: sashiko-bot Assisted-by: Claude:claude-opus-4.6 Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 0cee8f9c3b14bd6dee9c4310090a7f45b89b834f Author: Chris Mason Date: Thu Jun 4 13:06:37 2026 -0400 xprtrdma: Fix bcall rep leak and unbounded peek [ Upstream commit c7653d5cebc8492c77ec0415b5e9c0fb3e644bc6 ] rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). Fixes: 41c8f70f5a3d ("xprtrdma: Harden backchannel call decoding") Assisted-by: kres:claude-opus-4-7 Signed-off-by: Chris Mason Signed-off-by: Chuck Lever Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 77b207ddbc84f9a8ca9b98468db50a40f65545d9 Author: Lad Prabhakar Date: Thu May 21 10:12:56 2026 +0100 PCI: rcar-host: Remove unused LIST_HEAD(res) [ Upstream commit 6ba90ce2069ae923b0ec787aebdf2d786e5d2a58 ] Remove the unused LIST_HEAD(res) declaration from rcar_pcie_hw_enable(). The macro instantiation defines an unused 'struct list_head res' variable, which conflicts with a valid resource loop-local 'struct resource *res' declaration further down in the function, triggering a compiler variable shadowing warning: drivers/pci/controller/pcie-rcar-host.c:357:34: warning: declaration of 'res' shadows a previous local [-Wshadow] 357 | struct resource *res = win->res; Fixes: ce351636c67f75a9 ("PCI: rcar: Add suspend/resume") Signed-off-by: Lad Prabhakar Signed-off-by: Manivannan Sadhasivam Reviewed-by: Geert Uytterhoeven Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260521091256.15737-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Sasha Levin commit d49b921baaaecdd5503f27e304d62f35346f9009 Author: Li RongQing Date: Thu May 14 20:55:52 2026 -0400 PCI: mediatek: Fix operator precedence in PCIE_FTS_NUM_L0 macro [ Upstream commit 282305d7e9c0e27fd8b4df34b7cd5506a1eccdd6 ] The original PCIE_FTS_NUM_L0(x) macro was buggy due to improper operator precedence, where ((x) & 0xff << 8) was evaluated as ((x) & 0xff00). Instead of just fixing the parentheses, use the standard FIELD_PREP() macro. This makes the code more robust by automatically handling masks and shifts, while also adding compile-time type and range checking to ensure the value fits within PCIE_FTS_NUM_MASK. Fixes: 637cfacae96f ("PCI: mediatek: Add MediaTek PCIe host controller support") Signed-off-by: Li RongQing [mani: added the bitfield header include spotted by Sashiko] Signed-off-by: Manivannan Sadhasivam Reviewed-by: Krzysztof Wilczyński Link: https://patch.msgid.link/20260515005552.2343-1-lirongqing@baidu.com Signed-off-by: Sasha Levin commit 9d7b128bb3a4b71dcafc734bc3406282d26b3174 Author: Mike Snitzer Date: Thu Jun 4 16:24:03 2026 -0400 NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write [ Upstream commit 1d62e659c0bf11649cf48e002c2a55d148f2610a ] The FF_FLAGS_NO_IO_THRU_MDS flag lives on each lseg, so any fallback decision made when there is no current lseg (e.g. between LAYOUTRETURN and the next LAYOUTGET) cannot run the per-lseg check. Introduce a sticky hdr-level ditto for FF_FLAGS_NO_IO_THRU_MDS in struct nfs4_flexfile_layout::flags (NFS4_FF_HDR_NO_IO_THRU_MDS bit), set whenever ff_layout_alloc_lseg() parses an lseg with the flag. The bit is never cleared for the lifetime of the layout hdr; the server is assumed to be consistent in its no-fallback policy per file. kzalloc() in ff_layout_alloc_layout_hdr() zero-initializes the field. Use the new ff_layout_hdr_no_fallback_to_mds() helper to gate ff_layout_pg_get_mirror_count_write(): when pnfs_update_layout() returns NULL (e.g. NFS_LAYOUT_BULK_RECALL, pnfs_layout_io_test_failed, pnfs_layoutgets_blocked) the existing code unconditionally calls nfs_pageio_reset_write_mds(). This is a source of unwanted WRITE to MDS. Fix it by checking NFS4_FF_HDR_NO_IO_THRU_MDS bit, and if set surface -EAGAIN instead; the writepage-side caller (nfs_do_writepage() for buffered, nfs_direct_write_reschedule() for O_DIRECT) then redirties the request so writeback retries via pNFS. Fixes: 260074cd8413 ("pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Mike Snitzer Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 59e3c9efc54ed609901038d4b447f5e65425e3df Author: Mike Snitzer Date: Thu Jun 4 16:24:02 2026 -0400 NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors [ Upstream commit 7a375cafc14ed151508f908ea5681caf0a9cc1d6 ] Commit f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors") teaches ff_layout_{read,write}_pagelist() to return PNFS_NOT_ATTEMPTED when nfs4_ff_layout_prepare_ds() fails with a nfs_error_is_fatal() errno (e.g. -ETIMEDOUT from a SOFTCONN connect deadline, -ENOMEM, -ERESTARTSYS), so that the client gives up instead of spinning. pnfs_do_{read,write}() then dispatches the I/O through pnfs_{read,write}_through_mds() → nfs_pageio_reset_{read,write}_mds(). That fallback is unconditional and silently violates FF_FLAGS_NO_IO_THRU_MDS: when the layout segment carries the flag (typically single-mirror appliance layouts where MDS I/O is explicitly forbidden), the out_failed: path's \`&& !ds_fatal_error\` clause overrides the flag's short-circuit through ff_layout_avoid_mds_available_ds() and routes the I/O to the MDS file handle anyway. This is reachable in practice during a data-server restart: SOFTCONN exhaustion produces -ETIMEDOUT, which is fatal per nfs_error_is_fatal(), which triggers PNFS_NOT_ATTEMPTED, which silently goes to MDS. Preserve the upstream "don't spin on fatal errors" intent for layouts that permit MDS fallback. For layouts with FF_FLAGS_NO_IO_THRU_MDS set, mark the layout for return and request PNFS_TRY_AGAIN instead; if the server cannot supply a usable layout the failure now surfaces cleanly via pnfs_update_layout(), rather than via silent MDS I/O that contradicts the flag. Fixes: f06bedfa62d5 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Mike Snitzer Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 806e8dfe312f83bd32ee3547fc77a4433f236e31 Author: Dai Ngo Date: Tue May 26 16:29:53 2026 -0700 NFSv4/pnfs: defer return_range callbacks until after inode unlock [ Upstream commit 77b160b2d863d37f36b6c38e80a7d259ce939e69 ] Sometimes unmounting an NFS filesystem mounted with pNFS SCSI layouts triggers the following warning: BUG: scheduling while atomic: umount.nfs4/... __schedule_bug+0xbd/0x100 schedule_debug.constprop.0+0x19f/0x220 __schedule+0x10d/0x10a0 schedule+0x74/0x190 schedule_timeout+0xf5/0x220 io_schedule_timeout+0xd5/0x160 __wait_for_common+0x186/0x4b0 blk_execute_rq+0x2ef/0x3a0 scsi_execute_cmd+0x1ff/0x700 sd_pr_out_command.isra.0+0x242/0x380 [sd_mod] bl_unregister_scsi.constprop.0+0x109/0x3c0 [blocklayoutdriver] bl_unregister_dev+0x175/0x1c0 [blocklayoutdriver] bl_free_device+0x1f/0x1b0 [blocklayoutdriver] bl_free_deviceid_node+0x12/0x30 [blocklayoutdriver] nfs4_put_deviceid_node+0x171/0x360 [nfsv4] ext_tree_remove+0x11c/0x1d0 [blocklayoutdriver] _pnfs_return_layout+0x416/0x900 [nfsv4] nfs4_evict_inode+0x108/0x130 [nfsv4] evict+0x316/0x750 dispose_list+0xf1/0x1a0 evict_inodes+0x33f/0x440 generic_shutdown_super+0xc9/0x4e0 kill_anon_super+0x3a/0x90 nfs_kill_super+0x44/0x60 [nfs] deactivate_locked_super+0xb8/0x1b0 cleanup_mnt+0x25a/0x380 task_work_run+0x13e/0x210 exit_to_user_mode_loop+0x169/0x400 do_syscall_64+0x467/0x1550 entry_SYSCALL_64_after_hwframe+0x76/0x7e The warning occurs because the block layout driver unregisters the SCSI device while the inode lock is still held. Device unregistration issues a SCSI PR command, which may sleep, resulting in a "scheduling while atomic" warning. During layout return, ext_tree_remove() invokes the layout driver's return_range callback while holding the inode lock. For block layouts, this callback eventually calls bl_unregister_scsi(), which may block in scsi_execute_cmd() while issuing PR commands to the device. Fix this by deferring the return_range callbacks until after the inode lock has been released. The layout header reference count is incremented before invoking return_range(), ensuring that the layout header remains valid while the layout driver removes extents from the extent tree. Fixes: c88953d87f5c8 ("pnfs: add return_range method") Signed-off-by: Dai Ngo Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 4db3c1ddc54e6fe0658cb0573036ba3a52935874 Author: Sagi Grimberg Date: Wed May 13 09:58:24 2026 +0300 pNFS/filelayout: fix cheking if a layout is striped [ Upstream commit 91668417d4e925c98cae4a55b1b9860380ddbf16 ] A layout can still be striped with num_fh = 1 as it is perfectly possible that both MDS and DSs can handle the same filehandle. Hence check according to stripe_count > 1, which is the correct check to begin with. We should not be called with flseg->dsaddr = NULL, but if for some reason we do, return our best guess with is flseg->num_fh > 1. Fixes: a6b9d2fa0024 ("pNFS/filelayout: Fix coalescing test for single DS") Signed-off-by: Sagi Grimberg Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit c502420b6dc6c715b5c511ac825e352d7405e5c8 Author: Phillip Varney Date: Fri Jun 5 00:55:45 2026 +0000 clk: qcom: a53: Corrected frequency multiplier for 1152MHz [ Upstream commit bb56147ea9fce98ebde1d367335ba006cba61fbd ] The 1152MHz frequency entry for the a53 currently selects a multiplier of 62, giving 1190MHz. This changes the mulitiplier to 60 giving the intended 1152MHz. Signed-off-by: Phillip Varney Reviewed-by: Konrad Dybcio Fixes: 0c6ab1b8f894 ("clk: qcom: Add A53 PLL support") Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260605005502.313928-1-pbvarney@protonmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit ab438a9efb9042c79d2f8db28a326d55feb8591f Author: Nuno Sá Date: Fri Apr 24 18:40:14 2026 +0100 dmaengine: Fix possible use after free [ Upstream commit 92f853f0645aebf1d05d333e97ab7c342ace1892 ] In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check. Fixes: 0f571515c332 ("dmaengine: Add privatecnt to revert DMA_PRIVATE property") Signed-off-by: Nuno Sá Reviewed-by: Frank Li Link: https://patch.msgid.link/20260424-dma-dmac-handle-vunmap-v4-1-90f43412fdc0@analog.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 8ba5ba56bf6505ab6e66dee07b7e39ae3564964b Author: Icenowy Zheng Date: Tue Jun 2 15:03:44 2026 +0800 dmaengine: qcom: gpi: set DMA_PRIVATE capability [ Upstream commit 4e351f408743354d54ee1af5193fc78234f2044e ] The GPI DMA controller is only responsible for QUP peripherals, and cannot work as a general-purpose DMA accelerator. Set DMA_PRIVATE capability for it. This fixes error messages about GPI being shown when an async-tx consumer is loaded. Fixes: 5d0c3533a19f ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Icenowy Zheng Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20260602070344.3707256-1-zhengxingda@iscas.ac.cn Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 904eed5c1044b52db948e0322a5f74ccaccd0b8e Author: Srinivasan Shanmugam Date: Mon Jun 1 19:42:15 2026 +0530 drm/amd/display: Add missing kdoc for ALLM parameters [ Upstream commit d4c6ec729fb7a8bf8a27b19bd70a1b945ad93dac ] Add descriptions for the missing parameters for ALLMEnabled and ALLMValue to keep the function documentation synchronized with the function prototype mod_build_hf_vsif_infopacket(). Fixes the below with gcc W=1: ../display/modules/info_packet/info_packet.c:507 function parameter 'ALLMEnabled' not described in 'mod_build_hf_vsif_infopacket' ../display/modules/info_packet/info_packet.c:507 function parameter 'ALLMValue' not described in 'mod_build_hf_vsif_infopacket' Fixes: 3c2381b92cba ("drm/amd/display: add support for VSIP info packet") Cc: Roman Li Cc: Alex Hung Cc: Tom Chung Cc: Aurabindo Pillai Cc: Wayne Lin Cc: Nicholas Kazlauskas Cc: Bhawanpreet Lakha Signed-off-by: Srinivasan Shanmugam Reviewed-by: Alex Hung Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 58e90f4508dc4b51d475a6447fe8f620097b13ac Author: Rosen Penev Date: Sat May 30 17:01:50 2026 -0700 HID: logitech-hidpp: remove excess kernel-doc member in hidpp_scroll_counter [ Upstream commit f22a5db8a7d38152556f230d6d68e59dbc27971b ] The @dev member described in the kernel-doc does not exist in the struct. Remove the stale entry. Fixes: 0610430e3dea ("HID: logitech-hidpp: add input_device ptr to struct hidpp_device") Assisted-by: opencode:big-pickle Signed-off-by: Rosen Penev Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin commit f9ec3f3e9cf27dd06cd3725eeaa44e3ce46be893 Author: Sanjay Chitroda Date: Tue May 5 23:16:31 2026 +0530 iio: accel: mma8452: handle I2C read error(s) in mma8452_read() [ Upstream commit 5bdff291d20c31b365d9ddfe9c426fbfb41da5bb ] Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller. Fixes: 96c0cb2bbfe0 ("iio: mma8452: add support for runtime power management") Signed-off-by: Sanjay Chitroda Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit a9cf46054f81972f8c0f1dc2a79d2a141999dbce Author: Joshua Crofts Date: Fri May 15 12:28:23 2026 +0200 iio: magnetometer: ak8975: fix potential kernel stack memory leak [ Upstream commit a9a00d727b7bbc5e913a919530a9dd468935bf95 ] Currently in the AK8975 driver there are four instances where potential uninitialized kernel stack memory leaks can occur. If i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than the size of the buffer, uninitialized bytes are retained in the buffer and later the buffer is passed on to IIO buffers, potentially leaking memory to userspace. Fix this by adding checks whether the return value of the function is equal to the size of the buffer and subsequently if the value is lesser than zero to distinguish from a returned error code. Fixes: bc11ca4a0b84 ("iio:magnetometer:ak8975: triggered buffer support") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260513-ak8975-fix-v1-1-104ea605dd54%40gmail.com Signed-off-by: Joshua Crofts Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 6f22d5582ba92e704b044c2450cb9aff8bb56e39 Author: Joshua Crofts Date: Tue May 5 09:31:27 2026 +0200 iio: light: si1133: prevent race condition on timeout [ Upstream commit 8c50a95ceb230d17801758a9e41ffbbbe46f8b4d ] Sashiko reported a bug where the si1133_command exits on timeout without halting the sensor or masking the interrupt. If the sensor completes the command later, any subsequent command to the sensor will cause the IRQ handler to complete immediately, returning stale data to the driver all while the command hasn't finished yet, shifting all potential reads in the future. Fix this by masking the IRQ if wait_for_completion_timeout() fails. When initiating a new command, do a dummy read of the IRQ_STATUS register and turn the IRQ back on. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: sashiko-bot Closes: https://sashiko.dev/#/message/20260428-si1133-checkup-v2-5-70ad14bfefe2%40gmail.com Assisted-by: gemini:gemini-3.1-pro-preview Signed-off-by: Joshua Crofts Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 7cc49e89c23cf61da1fcbe4f1503232242300d2c Author: Joshua Crofts Date: Tue May 5 09:31:26 2026 +0200 iio: light: si1133: reset counter to prevent race condition [ Upstream commit 0a5f45ed2342aabae1e32c72558d15be28940a95 ] Sashiko reported a potential race condition happening when the driver returns an errno after a timeout in the si1133_command() function. The premature exit causes the hardware and software counters to become out of sync by not updating data->rsp_seq, therefore the internal hardware counter keeps incrementing. Fix this by adding a call to si1133_cmd_reset_counter() before returning from timeout. Fixes: e01e7eaf37d8 ("iio: light: introduce si1133") Reported-by: sashiko-bot Closes: https://sashiko.dev/#/message/20260428-si1133-checkup-v2-5-70ad14bfefe2%40gmail.com Assisted-by: gemini:gemini-3.1-pro-preview Signed-off-by: Joshua Crofts Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 96902299a22d126ef5eb3f45cd5d8ceea9e6a735 Author: James Kim Date: Sun May 3 19:11:31 2026 +0900 char: tlclk: fix use-after-free in tlclk_cleanup() [ Upstream commit bbf003b7794d6ad6f939fdd29f1f1bde8ac554c1 ] This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory. Fixes: 1a80ba882730 ("[PATCH] Telecom Clock Driver for MPCBL0010 ATCA computer blade") Signed-off-by: James Kim Link: https://patch.msgid.link/20260503101131.64219-1-james010kim@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 2157160afbaa32bda7bdde7689cfe8c5f2acee07 Author: Seungjin Bae Date: Mon May 18 18:49:02 2026 -0400 usb: host: max3421: Reject hub port requests for non-existent ports [ Upstream commit 11b5c101e2fd206104b05bc92554d356989423a8 ] The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. The `GetPortStatus` case correctly rejects requests with `index != 1`, since the virtual root hub has only a single port. However, the `ClearPortFeature` and `SetPortFeature` cases lack the same check. Fix this by extending the `index != 1` rejection to both cases, matching the existing behavior of `GetPortStatus`. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Suggested-by: Alan Stern Reviewed-by: Alan Stern Signed-off-by: Seungjin Bae Link: https://patch.msgid.link/20260518224901.1887013-3-eeodqql09@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 08b1d4cab0230697bc74c63fc4e40170a7559c54 Author: Seungjin Bae Date: Mon May 18 18:49:00 2026 -0400 usb: host: max3421: Fix shift-out-of-bounds in max3421_hub_control() [ Upstream commit cff06b03b530ae1fe8a13e93a7848f2130e00fb4 ] The `max3421_hub_control()` function handles USB hub class requests to the virtual root hub. In the `default` branches of both the `ClearPortFeature` and `SetPortFeature` switch statements, it modifies `max3421_hcd->port_status` by left shifting 1 by the request's `value` parameter. However, it does not validate whether this shift will exceed the width of `port_status`. So if a malicious userspace task with access to the root hub via /dev/bus/usb/.../001 issues a USBDEVFS_CONTROL ioctl with `wValue` greater than or equal to 32, the left shift operation invokes shift-out-of-bounds undefined behavior. This results in arbitrary bit corruption of `port_status`, including the normally-immutable change bits, which can bypass internal state checks and confuse the hub status. Fix this by rejecting requests whose `value` exceeds the shift width before performing the shift. This issue was found using a KLEE-based symbolic execution tool for kernel drivers that I'm currently developing. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Seungjin Bae Link: https://patch.msgid.link/20260518224901.1887013-1-eeodqql09@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 430ad4ea06a0767fb44a08e2212ceb3a996607ee Author: Guangshuo Li Date: Sun May 17 19:12:18 2026 +0800 staging: most: video: avoid double free on video register failure [ Upstream commit 7cb1c5b32a2bfde961fff8d5204526b609bcb30a ] comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. Fixes: eab231c0398a ("staging: most: v4l2-aim: remove unnecessary label err_vbi_dev") Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260517111218.945796-1-lgs201920130244@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 28867089da13a136b921e5c6fbf0699341f20cfd Author: Andy Shevchenko Date: Thu May 14 00:01:26 2026 +0200 phy: phy-can-transceiver: Check driver match and driver data against NULL [ Upstream commit ebee9004cc0200b2b708ebf7ac625d35c71c049f ] Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override() so platform drivers that rely on the existence of a device's driver data need to verify its presence. Accordingly, add requisite match and driver data checks against NULL to the driver where they are missing. Fixes: a4a86d273ff1 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver") Signed-off-by: Andy Shevchenko Link: https://patch.msgid.link/20260513220336.369628-2-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit e202748434d148e9d9cb66af0041ddabcf99d58c Author: Rafael J. Wysocki Date: Fri May 8 19:40:31 2026 +0200 platform/x86: xo15-ebook: Fix wakeup source and GPE handling [ Upstream commit b2fc2c6ebbd2d49935c8960755d8170faead2159 ] The device_set_wakeup_enable() call in ebook_switch_add() doesn't actually do anything because power.can_wakeup is not set for ACPI device objects. Moreover, had it done anything, it would have registered a wakeup source object that wouldn't have been used going forward and that wakeup source would have been leaked after driver removal because ebook_switch_remove() doesn't clean it up. Accordingly, remove that call from ebook_switch_add(). Also prevent leaking an enabled ACPI GPE after removing the driver by adding appropriate cleanup code to ebook_switch_remove(). Fixes: 89ca11771a4b ("OLPC XO-1.5 ebook switch driver") Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/1966125.tdWV9SEqCh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 7631c35195acc6462bcd4c5c8b601986c99ad863 Author: Rafael J. Wysocki Date: Fri May 8 20:00:27 2026 +0200 x86/platform/olpc: xo15: Drop wakeup source on driver removal [ Upstream commit cc966553e6ff0849978b5754531b768b0ff54985 ] Prevent leaking a wakeup source object after removing the driver by adding appropriate cleanup code to its remove callback function. Fixes: a0f30f592d2d ("x86, olpc: Add XO-1.5 SCI driver") Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2069931.usQuhbGJ8B@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 01a6332da1aa0bc9c2d9cacc60b0e4b5630295dd Author: Leo Yan Date: Wed Apr 8 13:31:43 2026 +0100 coresight: etm4x: Correct TRCVMIDCCTLR1 save and restore [ Upstream commit 0ec0a8785d21f63db520bd9d2a67c55e855d36a8 ] It is a typo to use trcvmidcctlr0 to save and restore TRCVMIDCCTLR1. Use trcvmidcctlr1 instead. Fixes: f5bd523690d2 ("coresight: etm4x: Convert all register accesses") Signed-off-by: Leo Yan Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20260408-arm_cs_fix_trcvmidcctlr1_typo-v1-1-6a5695363b46@arm.com Signed-off-by: Sasha Levin commit 46028f710feeb5651fffb847339f2203fe26b35e Author: Yingchao Deng Date: Sun Apr 26 17:59:34 2026 +0800 coresight: cti: Fix DT filter signals silently ignored [ Upstream commit 551bb2fd5e4ed63d33aa11f07102cce5179b7595 ] In cti_plat_process_filter_sigs(), after allocating a temporary cti_trig_grp struct via kzalloc_obj(), the code never assigns tg->nr_sigs = nr_filter_sigs. Since kzalloc zero-initialises the struct, tg->nr_sigs remains 0. cti_plat_read_trig_group() guards with: if (!tgrp->nr_sigs) return 0; so it returns immediately without reading any signal indices from DT. Fix by assigning tg->nr_sigs before calling cti_plat_read_trig_group(). Fixes: a5614770ab97 ("coresight: cti: Add device tree support for custom CTI") Signed-off-by: Yingchao Deng Reviewed-by: Leo Yan Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20260426-nr_sigs-v1-1-3b9df99dab97@oss.qualcomm.com Signed-off-by: Sasha Levin commit a37625c7b688fcf68a54263528eccbabfd7fa17a Author: Alexandru Hossu Date: Mon Apr 27 10:17:12 2026 +0200 staging: nvec: fix use-after-free in nvec_rx_completed() [ Upstream commit 26813881181deb3a32fbb59eadb2599cbe8423f6 ] In nvec_rx_completed(), when an incomplete RX transfer is detected, nvec_msg_free() is called to return the message back to the pool by clearing its 'used' atomic flag. Immediately after this, the code accesses nvec->rx->data[0] to check the message type. Since nvec_msg_free() marks the pool slot as available via atomic_set(), any concurrent or subsequent call to nvec_msg_alloc() could claim that same slot and overwrite its data[] array. Reading nvec->rx->data[0] after freeing the message is therefore a use-after-free. Fix this by saving the message type byte before calling nvec_msg_free(), then using the saved value for the battery quirk check. Fixes: d6bdcf2e1019 ("staging: nvec: Add battery quirk to ignore incomplete responses") Reviewed-by: Dan Carpenter Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260427081713.3401874-2-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 5424138848eb7d7d8a7196676e90a2cbf2142454 Author: Yizhou Zhao Date: Fri May 29 15:39:31 2026 +0800 net/9p: fix race condition on rdma->state in trans_rdma.c [ Upstream commit 7d54894a1ee265a72d70f7cae1da6cc774cccc71 ] The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to protect the read-modify-write of rdma->state The race can cause lost state transitions: recv_done() or the CM event handler could set state to FLUSHING/CLOSED while rdma_request() is concurrently checking or modifying state under the lock, leading to the FLUSHING transition being silently overwritten by CLOSING. This corrupts the connection state machine and can cause use-after-free on RDMA request objects during teardown. Fix by adding req_lock protection to all rdma->state modifications in recv_done() and p9_cm_event_handler(), matching the pattern already used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore in the CM event handler since it can race with recv_done() which runs in softirq context. Tested with a kernel module that races two threads (simulating rdma_request and recv_done/CM handler) on rdma->state with proper locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost transitions. Fixes: 473c7dd1d7b5 ("9p/rdma: remove useless check in cm_event_handler") Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: GLM:GLM-5.1 Signed-off-by: Yizhou Zhao Message-ID: <20260529073933.77315-1-zhaoyz24@mails.tsinghua.edu.cn> Signed-off-by: Dominique Martinet Signed-off-by: Sasha Levin commit 137e8b4823a9a11928428d4ec0a0cacb2f50a769 Author: Aleksandr Nogikh Date: Fri Jun 12 11:50:20 2026 +0000 ocfs2: fix circular locking dependency in ocfs2_dio_end_io_write [ Upstream commit ff6f26c58421614b02694ac9d219ac61d924bc68 ] A circular locking dependency involves INODE_ALLOC_SYSTEM_INODE, EXTENT_ALLOC_SYSTEM_INODE, and ORPHAN_DIR_SYSTEM_INODE. 1. ocfs2_mknod() acquires INODE_ALLOC then EXTENT_ALLOC. 2. ocfs2_dio_end_io_write() acquires EXTENT_ALLOC for unwritten extents, then ORPHAN_DIR via ocfs2_del_inode_from_orphan() while still holding EXTENT_ALLOC. 3. ocfs2_wipe_inode() acquires ORPHAN_DIR then INODE_ALLOC via ocfs2_remove_inode. Break the cycle in ocfs2_dio_end_io_write() by freeing the allocation contexts (releasing EXTENT_ALLOC) before acquiring ORPHAN_DIR. WARNING: possible circular locking dependency detected ------------------------------------------------------ is trying to acquire lock: ffff8881e78b33a0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}, at: ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299 but task is already holding lock: ffff8881e78b4fa0 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}, at: ocfs2_evict_inode+0xe97/0x43b0 fs/ocfs2/inode.c:1299 the existing dependency chain (in reverse order) is: -> #2 (&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]){+.+.}-{4:4}: inode_lock include/linux/fs.h:1029 [inline] ocfs2_del_inode_from_orphan+0x12e/0x7a0 fs/ocfs2/namei.c:2728 ocfs2_dio_end_io+0xf9c/0x1370 fs/ocfs2/aops.c:2418 dio_complete+0x25b/0x790 fs/direct-io.c:281 -> #1 (&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}: inode_lock include/linux/fs.h:1029 [inline] ocfs2_reserve_suballoc_bits+0x16d/0x4840 fs/ocfs2/suballoc.c:882 ocfs2_reserve_new_metadata_blocks+0x415/0x9a0 fs/ocfs2/suballoc.c:1078 ocfs2_mknod+0x10f3/0x2260 fs/ocfs2/namei.c:351 -> #0 (&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]){+.+.}-{4:4}: __lock_acquire+0x15a5/0x2cf0 kernel/locking/lockdep.c:5237 lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5868 down_write+0x96/0x200 kernel/locking/rwsem.c:1625 inode_lock include/linux/fs.h:1029 [inline] ocfs2_remove_inode fs/ocfs2/inode.c:733 [inline] ocfs2_wipe_inode fs/ocfs2/inode.c:896 [inline] ocfs2_delete_inode fs/ocfs2/inode.c:1157 [inline] ocfs2_evict_inode+0x1539/0x43b0 fs/ocfs2/inode.c:1299 Chain exists of: &ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE] --> &ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE] --> &ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[EXTENT_ALLOC_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE]); lock(&ocfs2_sysfile_lock_key[INODE_ALLOC_SYSTEM_INODE]); *** DEADLOCK *** Link: https://lore.kernel.org/97c902a6-3bcf-43ea-9b70-f1f136a6c3f2@mail.kernel.org Fixes: d647c5b2fbf8 ("ocfs2: split transactions in dio completion to avoid credit exhaustion") Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot Reported-by: syzbot+b225d4dfce6219600c42@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b225d4dfce6219600c42 Link: https://syzkaller.appspot.com/ai_job?id=0b53ce1e-2972-4192-aa85-8097a702762c Signed-off-by: Aleksandr Nogikh Reviewed-by: Heming Zhao Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Joseph Qi Cc: Changwei Ge Cc: Jun Piao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit aaa3bb2bbf2ccbfea9e4e0b9dabf3afc60b50cd0 Author: Guangshuo Li Date: Fri Jun 5 12:30:16 2026 +0800 ksmbd: fix use-after-free in same_client_has_lease() [ Upstream commit 65b655f65c3ca1ab5d598d3832bb0ff531725858 ] same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned reference in smb_grant_oplock() after copying the lease state. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Guangshuo Li Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 21f69ac1879bb970588d5e7c12a96e6542f7c1a7 Author: Eric Dumazet Date: Fri Jun 12 16:25:17 2026 +0000 tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) [ Upstream commit 2bf43d0e2e6a27d52a7d624e2d6b9116972e8a22 ] When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS". Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot+ebdb22d461c904fc3cb2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a2c3193.8812e0fc.3c3fa4.0001.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612162517.83394-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 71aafa16d79b107b33837f60b6cbc7d0cb8c5708 Author: Eric Dumazet Date: Fri Jun 12 13:59:49 2026 +0000 tipc: fix UAF in tipc_l2_send_msg() [ Upstream commit f4c3d89fc986b0da196ddfc6cfe0ea5d5d08bec6 ] Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). Fixes: 282b3a056225 ("tipc: send out RESET immediately when link goes down") https: //lore.kernel.org/netdev/6a2c1007.428ffe26.258b27.015d.GAE@google.com/T/#u Reported-by: syzbot+64ec81389cbad56a8c35@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Cc: Jon Maloy Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260612135949.4010482-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2db2da0cca19a0458855218e341372111b0295d9 Author: Gui-Dong Han Date: Fri May 29 11:34:06 2026 +0800 KEYS: Use acquire when reading state in keyring search [ Upstream commit c1201b37f666f6466ab1fd3a381c2b7a4b7e9fee ] The negative-key race fix added release/acquire ordering for key use. Publish payload before state; read state before payload. keyring_search_iterator() still uses READ_ONCE() before match callbacks. An asymmetric match callback calls asymmetric_key_ids(), which reads key->payload.data[asym_key_ids]. Use key_read_state() there to complete that ordering. Fixes: 363b02dab09b ("KEYS: Fix race between updating and finding a negative key") Signed-off-by: Gui-Dong Han Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260529033406.20673-1-hanguidong02@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin commit 8ccfda55f7dbc8b1c1fd593abe1247414c9ac5c1 Author: Aboorva Devarajan Date: Fri Jun 5 13:59:12 2026 +0530 powerpc/kexec: fix double get_cpu() imbalance in kexec_prepare_cpus [ Upstream commit 5c86f1c1f972761a04bf22f4c0618d1aa714185b ] kexec_prepare_cpus_wait() calls get_cpu() internally to obtain the current CPU id. kexec_prepare_cpus() calls kexec_prepare_cpus_wait() twice -- once for KEXEC_STATE_IRQS_OFF and once for KEXEC_STATE_REAL_MODE -- but only issues a single put_cpu() at the end, leaving preempt_count elevated by one extra nesting level. In practice the imbalance does not trigger a 'scheduling while atomic' splat because the kexec path is a one-way trip: IRQs are already disabled, no schedule() occurs after the leak, and default_machine_kexec() overwrites preempt_count with HARDIRQ_OFFSET before jumping into kexec_sequence() which never returns. However the bookkeeping is still wrong. kexec_prepare_cpus() calls local_irq_disable()/hard_irq_disable() before invoking kexec_prepare_cpus_wait(), so the CPU is already pinned and the get_cpu()/put_cpu() preempt_disable() bracketing is unnecessary. Only the current CPU id is needed, so replace get_cpu() with raw_smp_processor_id() and drop the now-unneeded put_cpu(). Fixes: 1fc711f7ffb0 ("powerpc/kexec: Fix race in kexec shutdown") Signed-off-by: Aboorva Devarajan Reviewed-by: Shrikanth Hegde Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260605082912.305100-4-aboorvad@linux.ibm.com Signed-off-by: Sasha Levin commit 880d5848fa70fef3243b636bfccd97091acc2dd9 Author: Aboorva Devarajan Date: Fri Jun 5 13:59:11 2026 +0530 powerpc/powernv: fix preempt count leak in pnv_kexec_wait_secondaries_down [ Upstream commit 0ecd26e93e698c8327521910fc6296f5b84a4b92 ] pnv_kexec_wait_secondaries_down() calls get_cpu() to obtain the current CPU id but never calls the matching put_cpu(), leaking one preempt_disable() nesting level on every invocation. In practice the imbalance does not trigger a visible splat because the kexec teardown path is a one-way trip: IRQs are already disabled, no schedule() occurs after the leak, and default_machine_kexec() overwrites preempt_count with HARDIRQ_OFFSET before jumping into kexec_sequence() which never returns. However the bookkeeping is still wrong. The function only needs the current CPU id, and this path runs with interrupts disabled and the CPU pinned, so the preempt_disable() side-effect of get_cpu() is unnecessary. Replace it with raw_smp_processor_id(). Fixes: 298b34d7d578 ("powerpc/powernv: Fix kexec races going back to OPAL") Signed-off-by: Aboorva Devarajan Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260605082912.305100-3-aboorvad@linux.ibm.com Signed-off-by: Sasha Levin commit 67aeb1eb93d4ffd898a3e74a7f3fe46ee71feb28 Author: Aboorva Devarajan Date: Fri Jun 5 13:59:10 2026 +0530 powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del [ Upstream commit 81e3a86030462824a67d697739cf3f387f4ba350 ] fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable. Fixes: a11106544f33 ("powerpc/perf: e500 support") Reviewed-by: Shrikanth Hegde Signed-off-by: Aboorva Devarajan Signed-off-by: Madhavan Srinivasan Link: https://patch.msgid.link/20260605082912.305100-2-aboorvad@linux.ibm.com Signed-off-by: Sasha Levin commit 8b3e0c1c63015deaf084286899f5b2d0526715de Author: Yadan Fan Date: Mon May 25 12:04:36 2026 +0800 MIPS: mm: Fix out-of-bounds write in maar_res_walk() [ Upstream commit 1b001b16bc88f3f7817e228acfd91ee01bdcfcce ] maar_res_walk() uses wi->num_cfg as the index into the fixed-size wi->cfg array, but checks whether the array is full only after it has filled the selected entry. If walk_system_ram_range() reports more than 16 memory ranges, the overflow call writes one struct maar_config past the end of the array before WARN_ON() prevents num_cfg from advancing. Move the full-array check before taking the array slot and return non-zero when the scratch array is full, so walk_system_ram_range() terminates the walk instead of invoking the callback for further ranges. Fixes: a5718fe8f70f ("MIPS: mm: Drop boot_mem_map") Signed-off-by: Yadan Fan Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit d693c5ed67dabe1ccbf8dcea93075bdc9ffd4ca0 Author: Sechang Lim Date: Mon Jun 15 10:19:58 2026 +0800 bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check [ Upstream commit a48802fb2cd2d1e23651989f8ff4d15e9d5dad54 ] start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop. Fixes: 7246d8ed4dcc ("bpf: helper to pop data from messages") Reviewed-by: Jiayuan Chen Reviewed-by: Emil Tsalapatis Reviewed-by: Kuniyuki Iwashima Signed-off-by: Sechang Lim Signed-off-by: Jiayuan Chen Link: https://lore.kernel.org/r/20260615021959.140010-6-jiayuan.chen@linux.dev Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit a12b1575f9feabd91695a9e9d004862f7195fa25 Author: Weiming Shi Date: Mon Jun 15 10:19:54 2026 +0800 bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data() [ Upstream commit 0c0a8ed85349dae298712d79cb276acfeb794d82 ] When the scatterlist ring is full or nearly full, bpf_msg_push_data() enters a copy fallback path and computes copy + len for the page allocation size. Since len comes from BPF with arg3_type = ARG_ANYTHING and both are u32, a crafted len can wrap the sum to a small value, causing an undersized allocation followed by an out-of-bounds memcpy. BUG: unable to handle page fault for address: ffffed104089a402 Oops: Oops: 0000 [#1] SMP KASAN NOPTI Call Trace: __asan_memcpy (mm/kasan/shadow.c:105) bpf_msg_push_data (net/core/filter.c:2852 net/core/filter.c:2788) bpf_prog_9ed8b5711920a7d7+0x2e/0x36 sk_psock_msg_verdict (net/core/skmsg.c:934) tcp_bpf_sendmsg (net/ipv4/tcp_bpf.c:421 net/ipv4/tcp_bpf.c:584) __sys_sendto (net/socket.c:2206) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Add an overflow check before the allocation. Link: https://lore.kernel.org/all/20260424155913.A19FDC19425@smtp.kernel.org Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data") Tested-by: Xiang Mei Tested-by: Xinyu Ma Reviewed-by: Jiayuan Chen Reviewed-by: Emil Tsalapatis Reviewed-by: Kuniyuki Iwashima Signed-off-by: Weiming Shi Signed-off-by: Jiayuan Chen Link: https://lore.kernel.org/r/20260615021959.140010-2-jiayuan.chen@linux.dev Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 9e384c635a75c703b0ab773d9fc759acb8f1559c Author: Huiwen He Date: Mon Jun 8 23:57:29 2026 +0800 smb/client: always return a value for FS_IOC_GETFLAGS [ Upstream commit 7acbaa16b99edaf8ef432229d4b7a6f3b666767d ] Currently, repeated lsattr calls on a regular CIFS file without the compressed attribute may show random flags: $ touch test.bin $ lsattr test.bin s-S-ia-A-EjI---------m test.bin $ lsattr test.bin ------d-cEjI---------m test.bin The lsattr reproducer depends on the previous contents of its userspace buffer, so it may not reproduce on every setup. A deterministic reproducer is to initialize the ioctl argument before FS_IOC_GETFLAGS on a file without the compressed attribute: int flags = 0x7fffffff; ioctl(fd, FS_IOC_GETFLAGS, &flags); On an affected kernel, flags remains 0x7fffffff. With the fix, it is set to 0. This happens because when the cached inode does not have the compressed bit set, the CIFS fallback path in FS_IOC_GETFLAGS returns success without calling put_user() to write the zero flags value into the user buffer. As a result, the caller observes stale contents from its own buffer. Fix this by always writing the visible flags value back to the user buffer before returning success, even when the value is zero. Fixes: 64a5cfa6db94 ("Allow setting per-file compression via SMB2/3") Signed-off-by: Huiwen He Reviewed-by: ChenXiaoSong Signed-off-by: Steve French Signed-off-by: Sasha Levin commit 7105644b9761a3c76784ad21cbdbcb8f77c65d72 Author: Florian Westphal Date: Fri Jun 5 15:11:19 2026 +0200 netfilter: nf_conncount: callers must hold rcu read lock [ Upstream commit 64d7d5abe2160bba369b4a8f06bdf5630573bab0 ] rcu_derefence_raw() should not have been used here, it concealed this bug. Its used because struct rb_node lacks __rcu annotated pointers, so plain rcu_derefence causes sparse warnings. The major tradeoff is that rcu_derefence_raw() doesn't warn when the caller isn't in a rcu read section. Extend the rcu read lock scope accordingly and cause sparse warnings, those warnings are the lesser evil. Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Closes: https://sashiko.dev/#/patchset/20260603230610.7900-1-fw%40strlen.de Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit fa26e4606aed0f7fe793c325506adeda1d847a43 Author: Runyu Xiao Date: Thu Jun 11 13:35:43 2026 +0800 kcm: use WRITE_ONCE() when changing lower socket callbacks [ Upstream commit 47186409c092cd7dd70350999186c700233e854d ] kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260611053543.2429462-1-runyu.xiao@seu.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit b639f8c30027ec442b622cd56f76e2263313b3a0 Author: Sun Jian Date: Fri Jun 12 19:40:31 2026 +0800 bpf: Run generic devmap egress prog on private skb [ Upstream commit 6001896f00984d317fb75160ba05c4a885fbe2a0 ] Generic XDP devmap multi redirect uses skb_clone() for intermediate destinations and sends the last destination with the original skb. This can leave multiple destinations sharing the same packet data. This becomes visible after generic devmap egress-program support was added: a devmap egress program may mutate packet data, and another destination sharing the same data can observe that mutation. Native XDP broadcast redirect does not have this issue because xdpf_clone() copies the frame data for each destination. Generic XDP should provide the same per-destination isolation before running a devmap egress program. Fix this by making cloned skbs private before running the generic devmap egress program. Use skb_copy() instead of skb_unshare() so allocation failure does not consume the skb and the existing caller error paths keep their ownership semantics. Fixes: 2ea5eabaf04a ("bpf: devmap: Implement devmap prog execution for generic XDP") Suggested-by: Jiayuan Chen Suggested-by: Jakub Kicinski Reviewed-by: Toke Høiland-Jørgensen Signed-off-by: Sun Jian Link: https://lore.kernel.org/r/20260612114032.244616-2-sun.jian.kdev@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 277b699584ec322173e2ea14edf00be62cf376c1 Author: Aditya Garg Date: Mon Jun 8 03:13:41 2026 -0700 net: mana: guard TX wq object destroy with INVALID_MANA_HANDLE check [ Upstream commit f8fd56977eeea3d6939b1a9cd8bd36f1779b3ad0 ] mana_create_txq() has several error paths (after mana_alloc_queues() or mana_create_wq_obj() failure) where tx_qp[i].tx_object stays as the INVALID_MANA_HANDLE sentinel set at allocation. mana_destroy_txq() then unconditionally calls mana_destroy_wq_obj() with (u64)-1, which firmware rejects and logs an error. Mirror the RX-side pattern in mana_destroy_rxq() and skip the destroy when the handle is still INVALID_MANA_HANDLE. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Dipayaan Roy Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20260608101345.2267320-3-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 372e7318af379eee29ab6e60848ce7d7db76c85a Author: Aditya Garg Date: Mon Jun 8 03:13:40 2026 -0700 net: mana: initialize gdma queue id to INVALID_QUEUE_ID [ Upstream commit 5985474e1cb4034680fac2145497a94b0860be50 ] mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj()) until mana_create_wq_obj() assigns the firmware-returned id. If creation fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing gc->cq_table[0] and silently breaking whichever real CQ owns that slot. Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then short-circuits cleanly. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Dipayaan Roy Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20260608101345.2267320-2-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7a05af7f58566682b73578b72ca8e53a268c43bd Author: Victor Nogueira Date: Wed Jun 10 16:28:53 2026 -0300 net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen [ Upstream commit 52f1da34c9f4d5bdc1e8b44242da5c7ba8db85f3 ] Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. Fixes: 342debc12183 ("codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog()") Acked-by: Jamal Hadi Salim Signed-off-by: Victor Nogueira Link: https://patch.msgid.link/20260610192855.3121513-3-victor@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 20dd591d8f951e1e6aca5052be8785e6181055e2 Author: Victor Nogueira Date: Wed Jun 10 16:28:52 2026 -0300 net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen [ Upstream commit 097f6fc7b1ae362dd7a9444b2572162fda73b284 ] Whenever fq_codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though fq_codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a recent report [1] and a wild memory access in qfq: [ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full) [ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216 [ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000 [ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000 [ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024 [ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000 [ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578 [ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000 [ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0 [ 29.376103][ T360] PKRU: 55555554 [ 29.376258][ T360] Call Trace: [ 29.376401][ T360] ... [ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057) [ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. [1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ Fixes: 342debc12183 ("codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog()") Reported-by: Anirudh Gupta Closes: https://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ Tested-by: Anirudh Gupta Acked-by: Jamal Hadi Salim Signed-off-by: Victor Nogueira Link: https://patch.msgid.link/20260610192855.3121513-2-victor@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 406622b1d452c9b229c0c60c5eae993b3c6aff49 Author: Guangshuo Li Date: Thu Jun 4 20:55:20 2026 +0800 ASoC: adau1372: Clear PLL_EN on failed PLL lock without reset GPIO [ Upstream commit 69b4141b428bcf2cf7a863950c0d6e5c5ae89ac1 ] The PLL lock failure path in adau1372_set_power() unwinds by putting the regmap back in cache-only mode, asserting the optional power-down GPIO and disabling mclk. adau1372_enable_pll() enables CLK_CTRL.PLL_EN before polling the PLL lock bit. If the lock fails on a board without a power-down GPIO, the error path disables mclk and returns an error, but leaves PLL_EN set in the hardware register. The normal power-off path already handles the no-GPIO case by explicitly clearing PLL_EN. Mirror that cleanup in the PLL lock failure path and clear PLL_EN while the regmap is still live, before switching it back to cache-only mode. Fixes: bfe6a264effc ("ASoC: adau1372: Fix clock leak on PLL lock failure") Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260604125520.1428905-1-lgs201920130244@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e98f589d54068dfcc7da42d9b730e47b84e2991a Author: Lars Pöschel Date: Fri Jun 12 12:52:44 2026 +0200 spi: xilinx: use FIFO occupancy register to determine buffer size [ Upstream commit 47f3b5365536e8c38f264824ab15fdb74454e066 ] The method the driver uses to determine the size of the FIFO has a problem. What it currently does is this: It stops the SPI hardware and writes to the TX FIFO register until TX FIFO FULL asserts in the status register. But the hardware does not only have the FIFO, it also has a shift register which can hold a byte. This can be seen, when writing a byte to the FIFO (while the SPI hardware is stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size of 16 for example, the current method returns a 17. This is a problem, at least when using the driver in irq mode. The same size determined for the TX FIFO is also assumed for the RX FIFO. When a SPI transaction wants to write the amount of the FIFO size or more bytes, the following happens, for example with 16 bytes FIFO size: The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and starts the SPI hardware and goes sleep. The hardware then shifts out 17 bytes (FIFO + shift register) and simultaneously reads bytes into the RX FIFO, but it only has 16 places, so it looses one byte. Then TX FIFO empty asserts, wakes the driver again, which has a fast path and reads 16 bytes from the RX FIFO, but before reading the last 17th byte (which is lost) it does this: sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET); if (!(sr & XSPI_SR_RX_EMPTY_MASK)) { xilinx_spi_rx(xspi); rx_words--; } It reads the status register and checks if the RX FIFO is not empty. But it is empty in our case. So this check spins in a while loop forever locking the driver. This patch fixes the logic to determine the FIFO size. Fixes: 4c9a761402d7 ("spi/xilinx: Simplify spi_fill_tx_fifo") Signed-off-by: Lars Pöschel Reviewed-by: Michal Simek Link: https://patch.msgid.link/20260612105244.9076-1-lars.poeschel.linux@edag.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit d47cb20ffc340323d9f6035d4f567bbd64f2e222 Author: Herbert Xu Date: Thu Jun 4 12:30:54 2026 +0800 crypto: rng - Free default RNG on module exit [ Upstream commit 606ba888b98e0d26a2c4e5c8dc0542e3ad8f0f3a ] When the rng module is removed the default RNG will be leaked. Call crypto_del_default_rng to free it if possible. Fixes: 7cecadb7cca8 ("crypto: rng - Do not free default RNG when it becomes unused") Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 23d3a7e896a1fe2d7a6bcb42f093948b79f8a198 Author: Felix Gu Date: Tue Jun 2 22:55:35 2026 +0800 crypto: cavium/cpt - fix DMA cleanup using wrong loop index [ Upstream commit 9dbf173bd32d5f81b005008b682bfb50aa093455 ] The sg_cleanup error path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Felix Gu Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 8a0db9fad3c97e6447a92417cb95d7c55eaa9530 Author: Felix Gu Date: Tue Jun 2 22:38:26 2026 +0800 crypto: marvell/octeontx - fix DMA cleanup using wrong loop index [ Upstream commit 7891c64c0520519782470ba29bac8a5761e295d8 ] The sg_cleanup path used list[i] instead of list[j] when unmapping DMA buffers, leaking successfully mapped entries and repeatedly unmapping the failed one. Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT") Signed-off-by: Felix Gu Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit cd1955f81bd8ebeef51b324989ac871ad1947fb6 Author: Michael Bommarito Date: Wed Jun 10 08:40:03 2026 -0400 tipc: reject inverted service ranges from peer bindings [ Upstream commit 2afb648f7b99216c687db1f89739c995e1144153 ] tipc_update_nametbl() inserts a binding advertised by a peer node using the lower and upper service-range bounds taken directly from the wire, without checking that lower <= upper. The local bind path validates the ordering (tipc_uaddr_valid()), but the name-distribution path does not. A binding with lower > upper is inserted at the far end of the service-range rbtree (keyed on lower) where no lookup or withdrawal can ever match it (service_range_foreach_match() requires sr->lower <= end). The publication, its service_range node and the augmented rbtree entry are then leaked for the lifetime of the namespace, and there is no per-peer cap equivalent to TIPC_MAX_PUBL on locally created bindings. Reject inverted ranges in the network path as well. A peer node can otherwise leak unbounded binding-table memory by sending PUBLICATION items with lower > upper. Fixes: 37922ea4a310 ("tipc: permit overlapping service ranges in name table") Signed-off-by: Michael Bommarito Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260610124003.3831170-4-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 67e55b054bf8025658dc0e255057f2a6236416bd Author: Michael Bommarito Date: Wed Jun 10 08:40:02 2026 -0400 tipc: prevent snt_unacked underflow on CONN_ACK [ Upstream commit ab3e10b44ba5411779aac7afd2477917dd77750f ] tipc_sk_conn_proto_rcv() subtracts the peer-supplied connection ack count from the unsigned 16-bit send counter snt_unacked without checking that it does not exceed the number of messages actually outstanding: tsk->snt_unacked -= msg_conn_ack(hdr); msg_conn_ack() is read straight from a received CONN_MANAGER/CONN_ACK message. If the ack count is larger than snt_unacked, the subtraction wraps to a near-maximum value, leaving tsk_conn_cong() permanently true and starving the connection of further transmits. Validate the ACK count at the start of the CONN_ACK block and drop the message if it acknowledges more messages than are outstanding. A peer (or, for a local connection, the connected peer socket) can otherwise wedge a TIPC connection's send side by sending an oversized connection ack. Fixes: 10724cc7bb78 ("tipc: redesign connection-level flow control") Signed-off-by: Michael Bommarito Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260610124003.3831170-3-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 52864c6c13dcc292481eabfeb3c31a86c3ec06f2 Author: Michael Bommarito Date: Wed Jun 10 08:40:01 2026 -0400 tipc: require net admin for TIPCv2 netlink mutators [ Upstream commit 86b0c540e2ea397cde021eecd24145f7c16a3d4e ] TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM. Fixes: 0655f6a8635b ("tipc: add bearer disable/enable to new netlink api") Link: https://lore.kernel.org/all/20260604163102.2658553-1-dominik.czarnota@trailofbits.com/ Signed-off-by: Michael Bommarito Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260610124003.3831170-2-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fc973ecd1a079b9a87c360478542f3a56dea085b Author: Victor Nogueira Date: Wed Jun 10 10:28:24 2026 -0300 net/sched: sch_hfsc: Don't make class passive twice [ Upstream commit 90b662ea25f5e83bb3b8ccec5b93ced810b92fb8 ] update_vf() is called from two places for the same class during a single dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last packets while dequeuing: 1. The child calls qdisc_tree_reduce_backlog(), which, now that the child is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns the class passive (cl_nactive is decremented up the hierarchy). 2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time) to charge the dequeued bytes. On the second call the class is already passive, but its child qdisc is still empty, so update_vf() arms go_passive again: if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC) go_passive = 1; The leaf is then skipped by the cl_nactive == 0 check inside the loop, which does not clear go_passive, so the stale go_passive propagates to the parent and decrements its cl_nactive a second time. A parent that still has other active children is driven to cl_nactive == 0 and removed from the vttree, even though those siblings are still backlogged. They are never dequeued again and the qdisc stalls. Fix this by only arming go_passive when the class is actually active, so an already-passive class no longer triggers a second passive transition. The byte accounting (cl->cl_total += len) still runs for every ancestor, so dequeued bytes continue to be counted exactly once. Fixes: 51eb3b65544c ("sch_hfsc: make hfsc_qlen_notify() idempotent") Reported-by: Anirudh Gupta Closes: https://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/ Tested-by: Anirudh Gupta Acked-by: Jamal Hadi Salim Signed-off-by: Victor Nogueira Link: https://patch.msgid.link/20260610132824.3027549-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 28ba1d3c956604a89168adfb4c97cfc6c509bba5 Author: Xin Long Date: Tue Jun 9 18:14:28 2026 -0400 sctp: validate embedded address parameter length [ Upstream commit e9361d0ca55c4af12aac09e2572852fa91046229 ] sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP, and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer parameter is large enough to contain an embedded address parameter header, but does not verify that the embedded address parameter's declared length fits within the bounds of the outer parameter. Later, sctp_process_param() and sctp_process_asconf_param() extract the embedded address parameter and pass it to af->from_addr_param(), which uses the address parameter length to parse the variable-length address payload. A malformed peer can therefore advertise an embedded address parameter length that exceeds the remaining bytes in the enclosing parameter. Validate that addr_param->p.length does not exceed the space available after the sctp_addip_param header before processing the embedded address parameter. Reject malformed parameters when the embedded address length extends beyond the enclosing parameter bounds. This prevents out-of-bounds reads when parsing malformed parameters carried in INIT or ASCONF processing paths. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: sashiko Signed-off-by: Xin Long Link: https://patch.msgid.link/7838b86b69f52add28808fb59034c8f992e97b2d.1781043268.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2870056a78961e0fecd652362ee9d3fcfd24a8a6 Author: Xiang Mei Date: Mon Jun 8 23:51:16 2026 -0700 bridge: cfm: reject invalid CCM interval at configuration time [ Upstream commit f3e02edd8322b31b8e6517faa6ba053bf29d1e26 ] ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). Fixes: 2be665c3940d ("bridge: cfm: Netlink SET configuration Interface.") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Acked-by: Nikolay Aleksandrov Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260609065116.2818837-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4b7ae30c81c2ee10a644749a3704a5c797ccc308 Author: Kuniyuki Iwashima Date: Wed Jun 10 06:17:19 2026 +0000 net: fib_rules: Don't dump dying fib_rule in fib_rules_dump(). [ Upstream commit 2821e85c058f81c9948a2fb1a634f7b47457d51c ] rocker_router_fib_event() calls fib_rule_get() during RCU dump. If the fib_rule is dying, refcount_inc() will complain about it. Let's call refcount_inc_not_zero() in fib_rules_dump(). Fixes: 5d7bfd141924 ("ipv4: fib_rules: Dump FIB rules when registering FIB notifier") Signed-off-by: Kuniyuki Iwashima Reviewed-by: Ido Schimmel Reviewed-by: David Ahern Link: https://patch.msgid.link/20260610061744.2030996-3-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 964f8f9015fb117402d8d2186593397cd93388e9 Author: HyeongJun An Date: Tue Jun 9 21:43:16 2026 +0900 ASoC: tegra: tegra210_ahub: Validate written enum value [ Upstream commit 1d8aabb413b5638670dfd1162169edc0ba276a2e ] tegra_ahub_put_value_enum() reads e->values[item[0]] before checking whether item[0] is within the enum item range. The existing check therefore happens too late to prevent an out-of-range read of the values array. Move the check before the array access. Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20260609124317.38046-5-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b4774a7da12b14fc37219ab4368d1907f9b5aca4 Author: HyeongJun An Date: Tue Jun 9 21:43:15 2026 +0900 ASoC: fsl: fsl_audmix: Validate written enum values [ Upstream commit 3cd17e4e2871114d5579fa7bc8da66faf7fc1930 ] fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src() convert the user-provided enum item with snd_soc_enum_item_to_val() before checking whether the item is within the enum's item count. The generic snd_soc_put_enum_double() helper performs that validation, but these callbacks use the converted value first: the clock-source path tests it with BIT(), and the output-source path indexes the prms transition table with it. Reject out-of-range enum items before converting them. Fixes: be1df61cf06e ("ASoC: fsl: Add Audio Mixer CPU DAI driver") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20260609124317.38046-4-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 216336418c007c4b44c650acf2fd3d2de5bb81e8 Author: HyeongJun An Date: Tue Jun 9 21:43:13 2026 +0900 ASoC: codecs: hdac_hdmi: Validate written enum value [ Upstream commit 0b08baeccdcf52fad328ad645f5b4fbee04eea34 ] hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value. Fixes: 4a3478debf36 ("ASoC: hdac_hdmi: Add jack reporting") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20260609124317.38046-2-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b746f949c2ac2b041102836095d6d4a2ef21fa75 Author: Maher Sanalla Date: Thu Jun 11 15:50:42 2026 +0300 RDMA/mlx5: Fix undefined shift of user RQ WQE size [ Upstream commit d881d60223aac8fdc12b227d89c76e131e92a9cd ] set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Link: https://patch.msgid.link/r/20260611-maher-sec-fixes-v1-1-cd8eb2542869@nvidia.com Signed-off-by: Maher Sanalla Signed-off-by: Edward Srouji Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 811d0bcef82fd1fe1a8adb582011f14c65b4a441 Author: Patrisious Haddad Date: Sun Jun 7 21:18:09 2026 +0300 RDMA/mlx5: Remove raw RSS QP restrack tracking [ Upstream commit 666031fed8f0fdfc29b20d125a628c1b0a04cdaf ] Raw RSS QP restrack tracking wasn't working to begin with as it was only tracking the first raw RSS QP which was added, since at creation the raw RSS QP number is reserved so the QP number for this qp type was always zero. The following raw RSS QP additions were always failing silently. Since the fix isn't trivial and there were no users that required or complained about this issue we are dropping this for now instead of fixing. Fixes: 968f0b6f9c01 ("RDMA/mlx5: Consolidate into special function all create QP calls") Link: https://patch.msgid.link/r/20260607-restrack-uaf-fix-v1-2-d72e45eb76c2@nvidia.com Signed-off-by: Patrisious Haddad Reviewed-by: Michael Guralnik Signed-off-by: Edward Srouji Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 02df147d42fef8804a5b577c7fc928dc547c3132 Author: Maxwell Doose Date: Thu Jun 4 22:52:51 2026 -0500 fs: efs: remove unneeded debug prints [ Upstream commit 89009392c80da5da00876c8334ff20028e6e3eb6 ] The current code uses debug prints conditionally compiled with #ifdef DEBUG. However, that code, when compiled, causes compiler errors due to incompatible formatters and undefined variables, notably: fs/efs/file.c: In function `efs_get_block': fs/efs/file.c:26:35: error: `block' undeclared (first use in this function); did you mean `iblock'? 26 | __func__, block, inode->i_blocks, inode->i_size); | ^~~~~ and: fs/efs/file.c: In function `efs_bmap': ./include/linux/kern_levels.h:5:25: error: format `%ld' expects argument of type `long int', but argument 4 has type `blkcnt_t' {aka `long long unsigned int'} [-Werror=format=] 5 | #define KERN_SOH "\001" /* ASCII Start Of Header */ | ^~~~~~ which also extends to the other formatters. As this part of the code has been dead for just about 14 years now, it has not been modernized to stay compatible with the most recent gcc compilers. Fix these issues by removing the debug prints. Link: https://lore.kernel.org/20260605035251.89305-2-m32285159@gmail.com Fixes: f403d1dbac6d ("fs/efs: add pr_fmt / use __func__") Signed-off-by: Maxwell Doose Suggested-by: Andrew Morton Cc: Fabian Frederick Cc: Christian Brauner Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit a41f1e0f099a5800f4d8b9d491225c5eda121133 Author: Heiko Carstens Date: Mon Jun 8 16:19:08 2026 +0200 s390/process: Fix kernel thread function pointer type [ Upstream commit d0478f5d3cba1095bfdeb43a9b063c10cdebef14 ] In case of a kernel thread __ret_from_fork() calls the specified function indirectly. Fix the kernel thread function pointer, since kernel threads return an int instead of void. Fixes: 56e62a737028 ("s390: convert to generic entry") Reviewed-by: Alexander Gordeev Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit 87177497cca90bf4fcfb759eb898560eb5b46a10 Author: Daniel Borkmann Date: Wed Jun 10 12:55:38 2026 +0200 bpf: Tighten cgroup storage cookie checks for prog arrays [ Upstream commit 10627ddc0167aab5c1c390a10ef461e9937aba08 ] The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge. Fixes: abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") Reported-by: Lin Ma Signed-off-by: Daniel Borkmann Acked-by: Yonghong Song Link: https://lore.kernel.org/r/20260610105539.705887-1-daniel@iogearbox.net Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit e8121a58241f010e2d8e96a78d5d1f3c61b44c91 Author: Yonghong Song Date: Tue Jun 9 22:18:31 2026 -0700 selftests/bpf: Fix bpf_iter/task_vma test [ Upstream commit 2e8ad1ff712d2a397e407c9fde60901f68d077dc ] For selftest bpf_iter/task_vma, I got a failure like below on my qemu run: test_task_vma_common:FAIL:compare_output unexpected compare_output: actual '561593546000-561593585000r--p0000000000:241256579534/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs' != expected '561593546000-561593585000r--p0000000000:245551546830/root/devshare/bpf-next/tools/testing/selftests/bpf/test_progs' Further debugging found out file->f_inode->i_ino value may exceed 32bit, e.g., i_ino = 0x14c2eae35, but the format string is '%u'. This caused inode mismatch between bpf iter and proc result. Fix the issue by using format string '%llu' to accommodate 64bit i_ino. Fixes: e8168840e16c ("selftests/bpf: Add test for bpf_iter_task_vma") Signed-off-by: Yonghong Song Acked-by: Leon Hwang Link: https://lore.kernel.org/r/20260610051831.1346659-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 547459934a8b80388bd8cc1b2671512fee6aaa2a Author: Louis Scalbert Date: Wed Jun 3 17:03:30 2026 +0200 bonding: 3ad: fix mux port state on oper down [ Upstream commit 807afc7544b865d4d09068a415fd5b71bf5665cc ] When the bonding interface has carrier down due to the absence of usable slaves and a slave transitions from down to up, the bonding interface briefly goes carrier up, then down again, and finally up once LACP negotiates collecting and distributing on the port. When lacp_strict mode is on, the interface should not transition to carrier up until LACP negotiation is complete. This happens because the actor and partner port states remain in Collecting_Distributing when the port goes down. When the port comes back up, it temporarily remains in this state until LACP renegotiation occurs. Previously this was mostly cosmetic, but since the bonding carrier state may depend on the LACP negotiation state, it causes the interface to flap. According to IEEE 802.3ad-2000 and IEEE 802.1ax-2014, Collecting and Distributing should be reset when a port goes down: - In the Receive state machine, port_enabled == FALSE causes a transition to the PORT_DISABLED state, which is expected to clear Partner_Oper_Port_State.Synchronization. - In the Mux state machine, Partner_Oper_Port_State.Synchronization == FALSE causes a transition to the ATTACHED state, which disables Collecting and Distributing. However, Partner_Oper_Port_State.Synchronization is not cleared in the PORT_DISABLED state. Clear Partner_Oper_Port_State.Synchronization in the Receive PORT_DISABLED state. Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad") Signed-off-by: Louis Scalbert Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20260603150331.1919611-6-louis.scalbert@6wind.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1d754b7c0fe6731454072624ba8a0a7217abdae5 Author: longlong yan Date: Fri Jun 5 10:14:45 2026 +0800 tools/virtio: check mmap return value in vringh_test [ Upstream commit ec6177dfe98b9be1c3ede6c0dfe4394ea2a76959 ] In parallel_test(), the return values of mmap() for both host_map and guest_map are not checked against MAP_FAILED. If mmap() fails, the subsequent code will dereference the invalid pointer, leading to a segmentation fault. Add MAP_FAILED checks after both mmap() calls, using err() to report the error and exit, consistent with the existing error handling style in this file (e.g., the open() call on line 149). Fixes: 1515c5ce26ae ("tools/virtio: add vring_test.") Signed-off-by: longlong yan Signed-off-by: Michael S. Tsirkin Message-ID: <20260605021446.1611-1-yanlonglong@kylinos.cn> Signed-off-by: Sasha Levin commit a64410311e951b1f9d185c2da6a0f99e5f89e2be Author: Zhang Tianci Date: Thu Feb 26 19:55:49 2026 +0800 vduse: Requeue failed read to send_list head [ Upstream commit 373ec43ded742b2f3aecf14731ffe1a57f438f38 ] When copy_to_iter() fails in vduse_dev_read_iter(), put the message back at the head of send_list to preserve FIFO ordering and retry the oldest pending request first. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Reported-by: Michael S. Tsirkin Suggested-by: Xie Yongji Signed-off-by: Zhang Tianci Reviewed-by: Xie Yongji Acked-by: Jason Wang Acked-by: Eugenio Pérez Acked-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin Message-ID: <20260226115550.1814-2-zhangtianci.1997@bytedance.com> Signed-off-by: Sasha Levin commit 4bf5a51963ff816f7443702dc536b9327cf5e550 Author: Qihang Tang Date: Fri May 8 15:58:21 2026 +0800 vhost/vdpa: validate virtqueue index in mmap and fault paths [ Upstream commit 929e4f044621c8cc30b612fb74e1410bef09e41b ] vhost_vdpa_mmap() and vhost_vdpa_fault() use vma->vm_pgoff as a virtqueue index for get_vq_notification(), but they do not validate that the index is smaller than v->nvqs. The ioctl path already performs both a bounds check and array_index_nospec(), but the mmap/fault path only checks that the index fits in u16. This allows an out-of-range queue index to reach driver-specific get_vq_notification() callbacks. Fix this by extracting a unified vhost_vdpa_get_vq_notification() helper that validates the queue index against v->nvqs and applies array_index_nospec() before calling the driver callback. Both the mmap and fault paths use this helper, and the bounds checking is consolidated into a single location. From source inspection, the most defensible impact is out-of-bounds access in the callback path, potentially leading to invalid PFN remaps and crash/DoS. Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap") Acked-by: Eugenio Pérez Acked-by: Michael S. Tsirkin Signed-off-by: Qihang Tang Signed-off-by: Michael S. Tsirkin Message-ID: <20260508075821.92656-1-q.h.hack.winter@gmail.com> Signed-off-by: Sasha Levin commit 35483c5306e09b3190ff937089d404a78012695c Author: Qihang Tang Date: Fri May 8 17:46:59 2026 +0800 vduse: hold vduse_lock across IDR lookup in open path [ Upstream commit e440e077748939839d9f76e24383b76b785f80ce ] vduse_dev_open() looks up struct vduse_dev through the IDR and then acquires dev->lock only after vduse_lock has been dropped. This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the same object from the IDR and free it before the open path locks the device, leading to a use-after-free. Close this race by keeping vduse_lock held until dev->lock has been acquired in the open path, matching the lock ordering already used by the destroy path. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Qihang Tang Signed-off-by: Michael S. Tsirkin Message-ID: <20260508094659.94647-1-q.h.hack.winter@gmail.com> Signed-off-by: Sasha Levin commit a4bcb633ae67149d7bae7062a81d72e5c184315f Author: Jason Gunthorpe Date: Fri Jun 5 08:53:35 2026 -0300 IB/mlx4: Fill in the access_flags if IB_MR_REREG_ACCESS is not specified [ Upstream commit bade9a3150d44ed20b8c6484c4c8a943b7289abb ] Sashiko noticed mlx4 was using whatever random access flags were provided when IB_MR_REREG_ACCESS is not used. Since IB_MR_REREG_TRANS needs access_flags it used the random ones which means it doesn't work sensibly if userspace provides only IB_MR_REREG_TRANS. Keep track of the current access_flag of the MR and use it if the user does not specify one. Also fixup a little confusion around mmr.access, it is the HW access flags so the convert_access() was missing. But nothing reads this by the time rereg_mr can happen. Fixes: 9376932d0c26 ("IB/mlx4_ib: Add support for user MR re-registration") Link: https://patch.msgid.link/r/0-v1-29ca7a402625+ddd6-mlx4_rereg_flags_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 47008d59c60ed896085da95f8d4dd40e1677dd3a Author: David Laight Date: Mon Jun 8 13:42:42 2026 +0100 fbdev: sm501fb: Fix buffer errors in OF binding code [ Upstream commit d8421e09382cfe0bd2a044c8b0a822f64855dd4e ] The code that gets the frame buffer mode from OF has 'use after free', 'buffer overrun' and memory leaks. info->edid_data isn't free if the probe functions fail or if pd->def_mode is set. If both the CRT and PANEL are enabled info->edid_data is used after being freed and is freed twice. The string returned by of_get_property(np, "mode", &len) is just written over either the static "640x480-16@60" or the module parameter string without any regard for the length (which is most likely longer). Use kstrump() for the OF mode and free everything before freeing 'info. Fixes: 4295f9bf74a88 ("video, sm501: add OF binding to support SM501") Signed-off-by: David Laight Signed-off-by: Helge Deller Signed-off-by: Sasha Levin commit a71143590ce9764dbcb47617647592ff8b4d48bc Author: Filipe Manana Date: Thu May 21 15:19:37 2026 +0100 btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() [ Upstream commit 486f8298b6188ff11ef1f4be7f1d5d2e4d1b1fae ] In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards. Reported-by: Dan Carpenter Link: https://lore.kernel.org/linux-btrfs/ag8ARRwykv8bpJ87@stanley.mountain/ Fixes: 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") Reviewed-by: Boris Burkov Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit bac6094506e1aff5e4c9288bd33f200bf3444c0b Author: Wolfram Sang Date: Tue May 12 11:13:03 2026 +0200 hwspinlock: qcom: avoid uninitialized struct members [ Upstream commit 8752c396ce3b2136b3d4c906fe103f6efb6782d9 ] The reg_field is allocated on stack, so using the REG_FIELD macro will ensure that unused members do not have uninitialized values. Fixes: 19a0f61224d2 ("hwspinlock: qcom: Add support for Qualcomm HW Mutex block") Link: https://sashiko.dev/#/patchset/20260319105947.6237-1-wsa%2Brenesas%40sang-engineering.com Signed-off-by: Wolfram Sang Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260512091339.31085-2-wsa+renesas@sang-engineering.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit c741485fa09bf5900f76d95424d86316d0a00331 Author: Hui Zhu Date: Fri May 29 09:41:30 2026 +0800 vmalloc: fix NULL pointer dereference in is_vm_area_hugepages() [ Upstream commit c55dd3b46c1208d6d2ea737a8aefef4aa4c70cb8 ] find_vm_area() can return NULL if the given address is not a valid vmalloc area. Check the return value before dereferencing it to avoid a kernel crash. Link: https://lore.kernel.org/20260529014130.671291-1-hui.zhu@linux.dev Fixes: 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings") Signed-off-by: Hui Zhu Reviewed-by: Dev Jain Reviewed-by: Uladzislau Rezki (Sony) Cc: Nicholas Piggin Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 8e9878e70684bdc6bd9623b9272f7de63681dd08 Author: Luca Leonardo Scorcia Date: Sun May 31 17:23:32 2026 +0100 pinctrl: mediatek: mt8167: Fix Schmitt trigger register offset of pins 34-39 [ Upstream commit 439bc91d20188901dac698bed4921caac76d9074 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Value was verified with SoC data sheet. Signed-off-by: Luca Leonardo Scorcia Fixes: 82d70627e94a ("pinctrl: mediatek: Add MT8167 Pinctrl driver") Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit 9ddee06ae71e6e3fbea616f6ce1d5c1d2bbcf940 Author: Luca Leonardo Scorcia Date: Sun May 31 17:22:30 2026 +0100 pinctrl: mediatek: mt8516: Fix Schmitt trigger register offset of pins 34-39 [ Upstream commit 1c3044cab23a056ea28da47da1cdd667a39df0b8 ] The correct Schmitt trigger register offset for pins 34-39 is 0xA00. Signed-off-by: Luca Leonardo Scorcia Fixes: 264667112ef0 ("pinctrl: mediatek: Add MT8516 Pinctrl driver") Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit cd2d1b1f99308f7680d75a377daaff363f1cc736 Author: Yuho Choi Date: Mon Jun 1 15:20:05 2026 -0400 watchdog: unregister PM notifier on watchdog unregister [ Upstream commit a298c7302ee9584a7a1ac1e8acbede8d98ab51a4 ] watchdog_register_device() registers wdd->pm_nb when WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not remove it. This leaves an embedded notifier block on the PM notifier chain after the watchdog device has been unregistered. A later suspend/resume notification can then call watchdog_pm_notifier() with a stale watchdog_device pointer, or at minimum after wdd->wd_data has been cleared by watchdog_dev_unregister(). Unregister the PM notifier before tearing down the watchdog device. Fixes: 60bcd91aafd2 ("watchdog: introduce watchdog_dev_suspend/resume") Signed-off-by: Yuho Choi Link: https://lore.kernel.org/r/20260601192005.1970805-1-dbgh9129@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 91f289728ec706b7ff1ca0ee845dd73ff2253488 Author: Al Viro Date: Sat May 30 03:48:34 2026 -0400 configfs: fix lockless traversals of ->s_children [ Upstream commit 9b9e8bb81c41fd27e7b57a1c936fde140548535f ] Having the parent directory locked protects entries from removal by another thread, but it does *not* protect cursors from being moved around by lseek() - or freed, for that matter. Fixes: 6f6107640625 ("configfs: Introduce configfs_dirent_lock") Reviewed-by: Jan Kara Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit 7865a1bfd20d10c03b083a5fc392d907ca5099b3 Author: Dmitry Vyukov Date: Fri May 29 15:09:06 2026 +0000 firmware_loader: Fix recursive lock in device_cache_fw_images() [ Upstream commit d3ec78f8f8d48a04a9fac38d47275c34645e5103 ] A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. Fixes: ac39b3ea73aa ("firmware loader: let caching firmware piggyback on loading firmware") Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot Reported-by: syzbot+e70e4c6f6eee43357ba7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=e70e4c6f6eee43357ba7 Link: https://syzkaller.appspot.com/ai_job?id=8b4af9fd-24af-423f-8acb-1159fd34c1a5 Signed-off-by: Dmitry Vyukov Link: https://patch.msgid.link/48b092a5-f49d-48a4-95f4-f65bebfc6bc3@mail.kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin commit d0d1c8868427617a1d64d00a9b89b150641822af Author: Felix Gu Date: Fri May 29 23:31:06 2026 +0800 spi: ep93xx: fix double-free of zeropage on DMA setup failure [ Upstream commit 7886054b06f762f62054957a8f6de0f14e6b7541 ] If DMA setup fails after allocating the zeropage, the error path frees the page but leaves espi->zeropage dangling. A subsequent call to ep93xx_spi_release_dma() sees the non-NULL pointer and frees the page again. Clear the pointer after freeing in the error path of ep93xx_spi_setup_dma(). Fixes: 626a96db1169 ("spi/ep93xx: add DMA support") Signed-off-by: Felix Gu Link: https://patch.msgid.link/20260529-ep93xx-v1-1-9185070ca1fc@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit cbc9982c8573fb9e35040063aa78c8ebe768a1ff Author: Jason Gunthorpe Date: Wed Jun 3 22:27:42 2026 -0300 IB/mlx5: Properly support implicit ODP rereg_mr [ Upstream commit ee7a8335069150c3f1893a697ab30bbeca00d796 ] Due to all the child mkeys in the implicit ODP configuration we cannot change anything in place for the parent mkey. Instead the whole thing needs to be rebuilt if any change is requested. If the user does not specify a translation then force the implicit values which will then fall through the logic into mlx5_ib_reg_user_mr() to allocate a completely new MR. Since implicit children were also touching the mr->pd, this removes another case where the access was racy. Fixes: ef3642c4f54d ("RDMA/mlx5: Fix error unwinds for rereg_mr") Link: https://sashiko.dev/#/patchset/20260427-security-bug-fixes-v3-0-4621fa52de0e%40nvidia.com?part=4 Link: https://patch.msgid.link/r/3-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 9878348a0395df2c336e044bbced1fb180248e39 Author: Jason Gunthorpe Date: Wed Jun 3 22:27:40 2026 -0300 IB/mlx5: Don't take the rereg_mr fallback without a new translation [ Upstream commit 55d339d200c908de83a408d023cfb7be779b0dd7 ] Jumping to mlx5_ib_reg_user_mr() without IB_MR_REREG_TRANS set will use garbage values for start, length, and iova. Recovering the original mr parameters for ODP and DMABUF to properly recreate it is too hard in this flow, so just fail it. Fixes: ef3642c4f54d ("RDMA/mlx5: Fix error unwinds for rereg_mr") Link: https://patch.msgid.link/r/1-v1-29ebd2c229b5+fd5-ib_mr_pd_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 0fee2063eb31b6fc765b6e6c501d0a7ebf219c2d Author: Pengjie Zhang Date: Wed Jun 3 13:56:35 2026 +0800 cpufreq: Documentation: fix conservative governor freq_step description [ Upstream commit 03120e1425262c7d11f93362a88e579a1720390b ] The conservative governor documentation incorrectly states that setting freq_step to 0 will use the default 5% frequency step. In reality, since at least commit 8e677ce83bf4 ("[CPUFREQ] conservative: fixup governor to function more like ondemand logic"), freq_step=0 has always caused the governor to skip frequency updates entirely. Correct the documentation to reflect the actual behavior: freq_step=0 disables frequency changes by the governor entirely. Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") Signed-off-by: Pengjie Zhang Reviewed-by: Zhongqiu Han [ rjw: Subject adjustment ] Link: https://patch.msgid.link/20260603055635.1549943-1-zhangpengjie2@huawei.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 066d79bd55aa630cf772617c7888ba7971d33342 Author: Yuho Choi Date: Wed Jun 3 12:31:08 2026 -0400 ACPI: IPMI: Fix message kref handling on dead device [ Upstream commit 63320db6a5d84ec3fed8b3d36ba5244d07ddd108 ] acpi_ipmi_space_handler() takes an extra reference on tx_msg before checking whether the selected IPMI device is dead. The reference belongs to the tx_msg_list entry and is normally dropped by ipmi_cancel_tx_msg() or ipmi_flush_tx_msg() after the message is removed from the list. On the dead-device path, the message has not been queued yet, but the error path still calls ipmi_msg_release() directly. That bypasses kref_put() and frees tx_msg while the queued-message reference is still recorded in the kref count. Take the queued-message reference only after the dead-device check succeeds, immediately before adding tx_msg to the list. Fixes: 7b9844772237 ("ACPI / IPMI: Add reference counting for ACPI IPMI transfers") Signed-off-by: Yuho Choi Link: https://patch.msgid.link/20260603163108.2149359-1-dbgh9129@gmail.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 14fe4f75fd5309d6b75f8e840ada88912b374207 Author: Kyle Zeng Date: Sat Jun 6 17:41:29 2026 -0700 ALSA: seq: Clear variable event pointer on read [ Upstream commit 705dd6dcbc0ea87351c660c1a6443f85f1001c76 ] snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kyle Zeng Link: https://patch.msgid.link/20260607004129.61345-1-kylebot@openai.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 6389f2c135311c4ce7c08c3b29145c8f95aacf1f Author: Takashi Iwai Date: Tue May 23 09:53:46 2023 +0200 ALSA: seq: Add UMP support [ Upstream commit 46397622a3fa8372b8fda0f04b33d16923b03b1b ] Starting from this commit, we add the basic support of UMP (Universal MIDI Packet) events on ALSA sequencer infrastructure. The biggest change here is that, for transferring UMP packets that are up to 128 bits, we extend the data payload of ALSA sequencer event record when the client is declared to support for the new UMP events. A new event flag bit, SNDRV_SEQ_EVENT_UMP, is defined and it shall be set for the UMP packet events that have the larger payload of 128 bits, defined as struct snd_seq_ump_event. For controlling the UMP feature enablement in kernel, a new Kconfig, CONFIG_SND_SEQ_UMP is introduced. The extended event for UMP is available only when this Kconfig item is set. Similarly, the size of the internal snd_seq_event_cell also increases (in 4 bytes) when the Kconfig item is set. (But the size increase is effective only for 32bit architectures; 64bit archs already have padding there.) Overall, when CONFIG_SND_SEQ_UMP isn't set, there is no change in the event and cell, keeping the old sizes. For applications that want to access the UMP packets, first of all, a sequencer client has to declare the user-protocol to match with the latest one via the new SNDRV_SEQ_IOCTL_USER_PVERSION; otherwise it's treated as if a legacy client without UMP support. Then the client can switch to the new UMP mode (MIDI 1.0 or MIDI 2.0) with a new field, midi_version, in snd_seq_client_info. When switched to UMP mode (midi_version = 1 or 2), the client can write the UMP events with SNDRV_SEQ_EVENT_UMP flag. For reads, the alignment size is changed from snd_seq_event (28 bytes) to snd_seq_ump_event (32 bytes). When a UMP sequencer event is delivered to a legacy sequencer client, it's ignored or handled as an error. Conceptually, ALSA sequencer client and port correspond to the UMP Endpoint and Group, respectively; each client may have multiple ports and each port has the fixed number (16) of channels, total up to 256 channels. As of this commit, ALSA sequencer core just sends and receives the UMP events as-is from/to clients. The automatic conversions between the legacy events and the new UMP events will be implemented in a later patch. Along with this commit, bump the sequencer protocol version to 1.0.3. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-26-tiwai@suse.de Signed-off-by: Takashi Iwai Stable-dep-of: 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read") Signed-off-by: Sasha Levin commit 67e735b2aaa6ec0967f00713b327fb360c2a451c Author: Takashi Iwai Date: Tue May 23 09:53:45 2023 +0200 ALSA: seq: Introduce SNDRV_SEQ_IOCTL_USER_PVERSION ioctl [ Upstream commit afb72505e4614a2ccefe3440d37dec3a2273c330 ] For the future extension of ALSA sequencer ABI, introduce a new ioctl SNDRV_SEQ_IOCTL_USER_PVERSION. This is similar like the ioctls used in PCM and other interfaces, for an application to specify its supporting ABI version. The use of this ioctl will be mandatory for the upcoming UMP support. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-25-tiwai@suse.de Signed-off-by: Takashi Iwai Stable-dep-of: 705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read") Signed-off-by: Sasha Levin commit bd4c6578e79f337079933da206be2b5d95092bee Author: Rui Qi Date: Sat Jun 6 20:17:59 2026 -0600 riscv: stacktrace: Remove bogus -0x4 offset in non-FP walk_stackframe [ Upstream commit 8ac35bac70e7e581d673b76878f7691cdadc33b8 ] In the non-frame-pointer version of walk_stackframe, each value read from the stack is treated as a potential return address and has 0x4 subtracted before being used as the program counter. This was intended to convert the return address (the instruction after a call) back to the call site, but it is incorrect: 1. RISC-V has variable-length instructions due to the RVC (compressed instruction) extension. A call instruction can be either 4 bytes (regular) or 2 bytes (compressed, e.g. c.jal). Subtracting a fixed 0x4 assumes all call instructions are 4 bytes, which is wrong for compressed instructions. 2. Stack traces conventionally report return addresses, not call sites. Other architectures (ARM64, x86, ARM) do not subtract instruction size from return addresses in their stack unwinding code. 3. The frame-pointer version of walk_stackframe already dropped the -0x4 offset. Commit b785ec129bd9 ("riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support") replaced "pc = frame->ra - 0x4" with ftrace_graph_ret_addr(), and the commit message explicitly noted that "the original calculation, pc = frame->ra - 4, is buggy when the instruction at the return address happened to be a compressed inst." The non-FP version was simply overlooked. Remove the bogus -0x4 offset to match the FP version and the conventions used by other architectures. Fixes: 5d8544e2d007 ("RISC-V: Generic library routines and assembly") Signed-off-by: Rui Qi Link: https://patch.msgid.link/20260603115329.791603-2-qirui.001@bytedance.com Signed-off-by: Paul Walmsley Signed-off-by: Sasha Levin commit 3cf92b44c4fb88a5e8de8733a4494c0956606bca Author: Tristan Madani Date: Tue Apr 21 13:50:17 2026 +0000 wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication [ Upstream commit df2187acfca6c6cca372c5d35f42394d9c270b09 ] The firmware-controlled rsp->count field is used as the loop bound for indexing into the flexible rsp->regs[] array without validation against the message length. A count exceeding the actual data causes out-of- bounds reads from the heap-allocated message buffer. Add a check that count fits within the received message. Fixes: 43efa3c0f241 ("wcn36xx: Implement print_reg indication") Signed-off-by: Tristan Madani Reviewed-by: Loic Poulain Link: https://patch.msgid.link/20260421135018.352774-3-tristmd@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 2bf5fe7025ada0feaf5851ff4d04ee2de24809bf Author: Leon Hwang Date: Tue Jun 2 23:09:30 2026 +0800 bpf: Update transport_header when encapsulating UDP tunnel in lwt [ Upstream commit 82d7d0adbc678064543e9d254864f6b4ea4a388c ] Currently, bpf_lwt_push_ip_encap() does not update skb->transport_header. When a driver, e.g. ice, reuses the stale skb->transport_header to offload checksum computation to NIC hardware, VxLAN packets encapsulated by bpf_lwt_push_encap() helper may be dropped due to incorrect checksum. Update skb->transport_header in bpf_lwt_push_ip_encap() whenever the encapsulated packet uses UDP, so checksum offload works correctly. Fixes: 52f278774e79 ("bpf: implement BPF_LWT_ENCAP_IP mode in bpf_lwt_push_encap") Cc: Leon Hwang Signed-off-by: Leon Hwang Link: https://lore.kernel.org/r/20260602150931.49629-2-leon.hwang@linux.dev Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit a80b3b13786e9ab1c52b31a1f16c7d6708fa9220 Author: Jacob Moroni Date: Tue Jun 2 21:44:23 2026 +0000 RDMA/irdma: Fix OOB read during CQ MR registration [ Upstream commit 4385ddd654d90245eeb83b3cb539670ab5c85ba4 ] Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://patch.msgid.link/r/20260602214423.1315105-2-jmoroni@google.com Signed-off-by: Jacob Moroni Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit ba03ba1702600ea6ffdeb9d5ccfa54185df5e397 Author: Jason Gunthorpe Date: Tue Jun 2 16:37:28 2026 -0300 IB/cm: Fix av cm device leak on an error path in cm_init_av_by_path() [ Upstream commit 9b2207bc5cdb955bdae34b3eec80f04979e17081 ] Codex pointed out that cm_init_av_by_path() can call cm_set_av_port() which takes a reference on the cm device, but then can immediately return error if ib_init_ah_attr_from_path() fails. Since callers like ib_send_cm_req() put the av on the stack this leaks that cm device reference. Re-order cm_init_av_by_path() so it doesn't touch the av until it has done all its failable work, and then update the av in one shot so it is either left alone or fully init'd. Sashiko also pointed out that the cm_destroy_av() prior to cm_init_av_by_path() is harmful as it leaves the AV broken in the error case and thus the REJ won't send. Since cm_init_av_by_path() is now atomic it is safe to delete the cm_destroy_av(). On succees the av from cm_init_av_for_response() is cleaned up by cm_init_av_by_path(), on failure the 'goto rejected' guarentees the av is destroyed during ib_destroy_cm_id(). Fixes: 76039ac9095f ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock") Link: https://patch.msgid.link/r/0-v1-38292501f539+14f-ib_cm_av_leak_jgg@nvidia.com Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit ad38166cb1bedbb13190dca9355141f54135caa5 Author: Pablo Neira Ayuso Date: Thu Jun 4 08:21:13 2026 +0200 netfilter: conntrack: call nf_ct_gre_keymap_destroy() if master helper is pptp [ Upstream commit b0f02608fbcd607b5131cceb91fc0a035264e61c ] For GRE flows, validate that the ct master helper (if any) is pptp before calling nf_ct_gre_keymap_destroy(), so the helper data area can be accessed safely. Note that only the pptp helper provides a .destroy callback. Fixes: e56894356f60 ("netfilter: conntrack: remove l4proto destroy hook") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 5ef34156d6d067b2139144dba5e147bbe8370077 Author: Fernando Fernandez Mancera Date: Tue May 26 23:58:30 2026 +0200 netfilter: synproxy: protect nf_ct_seqadj_init() with conntrack lock [ Upstream commit 9e37388b8070afe73d4ab2d973b28593ed65f3ad ] nf_ct_seqadj_init() is called without holding the ct lock. This can race with nf_ct_seq_adjust() when a connection is in CLOSE state due to an RST or connection reopening. In addition for SYN_RECV state, concurrent processing of packets can trigger nf_ct_seq_adjust() too. These situations create a read/write data race. As synproxy is the only user of nf_ct_seqadj_init() at the moment, fix this by holding ct->lock inside nf_ct_seqadj_init() until all is done. Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit c5dbf2784828886a66c61782324e4aa830de1e57 Author: Fernando Fernandez Mancera Date: Mon May 25 17:35:54 2026 +0200 netfilter: nfnetlink_osf: fix mss parsing on big-endian architectures [ Upstream commit a625c94144c9b66d32e1f374f909f38db46161c1 ] The MSS calculation in nf_osf_match_one() manually shifts bytes to construct a 16-bit value before passing it to ntohs(). This works on little-endian hosts but it does not work on big-endian as the bytes are being always shifted and set in the same way for all architectures. Use get_unaligned_be16() to fix this on big-endian systems. It also simplifies the code. Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 9df159148407f6c5768671c6ae71789caecdae2e Author: Joseph Qi Date: Mon Jun 1 20:16:18 2026 +0800 ocfs2: fix race between ocfs2_control_install_private() and ocfs2_control_release() [ Upstream commit 57dcfd9049d497c31151787a0696d59f0a98f8e6 ] Move atomic_inc(&ocfs2_control_opened) and the handshake state update inside ocfs2_control_lock to close a race window where ocfs2_control_release() can observe ocfs2_control_opened dropping to zero (resetting ocfs2_control_this_node and running_proto) while ocfs2_control_install_private() is about to bump the counter and mark the connection valid. Link: https://lore.kernel.org/20260601121618.1263346-1-joseph.qi@linux.alibaba.com Fixes: 3cfd4ab6b6b4 ("ocfs2: Add the local node id to the handshake.") Signed-off-by: Joseph Qi Reported-by: Ginger Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 90a6512425414098a63fc97b77bed089c75d106b Author: Zhang Cen Date: Sun May 31 12:47:14 2026 +0800 ocfs2/dlm: require a ref for locking_state debugfs open [ Upstream commit 03ad858ce8064861ea580021976dc19b7aabb549 ] debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context. KASAN reports this as a slab-use-after-free in dlm_put() called from debug_lockres_release(). Fail the open when dlm_grab() cannot acquire the reference and unwind the seq_file private state before returning. That keeps locking_state from handing out a file descriptor whose release path does not own the dlm_ctxt. The buggy scenario involves two paths, with each column showing the order within that path: locking_state debugfs open: last domain unregister: 1. debug_lockres_open() reads 1. dlm_unregister_domain() calls inode->i_private. dlm_complete_dlm_shutdown(). 2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from dlm_grab(dlm) and gets NULL. dlm_domains. 3. open still stores the raw dlm 3. final teardown reaches pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it. returns success. 4. debug_lockres_release() later calls dlm_put(dl->dl_ctxt). Validation reproduced this kernel report: KASAN slab-use-after-free in dlm_put+0x82/0x200 RIP: 0033:0x7f4d349bc9e0 The buggy address belongs to the object at ffff888103a3c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 816 bytes inside of freed 2048-byte region [ffff888103a3c000, ffff888103a3c800) Write of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) dlm_put+0x82/0x200 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) kasan_check_range+0x105/0x1b0 (?:?) debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) dlm_put+0x9/0x200 (?:?) debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) full_proxy_release+0x67/0x90 (?:?) __fput+0x1df/0x4b0 (?:?) do_raw_spin_lock+0x10f/0x1b0 (?:?) fput_close_sync+0xd2/0x170 (?:?) __x64_sys_close+0x55/0x90 (?:?) do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87) irqentry_exit+0xac/0x6e0 (?:?) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Freed by task stack: kasan_save_stack+0x33/0x60 (?:?) kasan_save_track+0x14/0x30 (?:?) kasan_save_free_info+0x3b/0x60 (?:?) __kasan_slab_free+0x5f/0x80 (?:?) kfree+0x30f/0x580 (?:?) dlm_put+0x1ce/0x200 (?:?) dlm_unregister_domain+0xf6/0xb30 (?:?) o2cb_cluster_disconnect+0x6b/0x90 (?:?) ocfs2_cluster_disconnect+0x41/0x70 (?:?) ocfs2_dlm_shutdown+0x1c4/0x220 (?:?) ocfs2_dismount_volume+0x38a/0x550 (?:?) generic_shutdown_super+0xc3/0x220 (?:?) kill_block_super+0x29/0x60 (?:?) deactivate_locked_super+0x66/0xe0 (?:?) cleanup_mnt+0x13d/0x210 (?:?) task_work_run+0xfa/0x170 (?:?) exit_to_user_mode_loop+0xd6/0x430 (?:?) do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Link: https://lore.kernel.org/20260531044714.1640172-1-rollkingzzc@gmail.com Fixes: 4e3d24ed1a12 ("ocfs2/dlm: Dumps the lockres' into a debugfs file") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 441abb77222f155e8d931dbabb465466db01cfd7 Author: Zhang Cen Date: Thu May 28 23:12:47 2026 +0800 ocfs2: reject FITRIM ranges shorter than a cluster [ Upstream commit ca1afd88f5eaaff9168e1466e5401385edf59543 ] ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for requests that cannot discard even one allocation unit and keeps zero-cluster trims out of the group walk. Link: https://lore.kernel.org/20260528151247.361854-1-rollkingzzc@gmail.com Fixes: aa89762c5480 ("ocfs2: return EINVAL if the given range to discard is less than block size") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 4ab17e328522a4df5fe0f0dcf39098118b1feeaa Author: Dmitry Antipov Date: Fri May 29 12:41:28 2026 +0300 ocfs2: fix buffer head management in ocfs2_read_blocks() [ Upstream commit 6371a07148ee979af22a9d6f4c277462953a9a4a ] In ocfs2_read_blocks(), caller should't assume that buffer head returned by 'sb_getblk()' is exclusively owned and so 'put_bh()' always drops b_count from 1 to 0. If it is not so, buffer head remains on hold and likely to be returned by the next call to 'sb_getblk()' unchanged - that is, with BH_Uptodate bit set even if it has failed validation previously, thus allowing to insert that buffer head into OCFS2 metadata cache and submit it to upper layers. To avoid such a scenario, BH_Uptodate should be cleared immediately after 'validate()' callback has detected some data inconsistency. Link: https://lore.kernel.org/20260529094128.494293-1-dmantipov@yandex.ru Fixes: cf76c78595ca ("ocfs2: don't put and assigning null to bh allocated outside") Signed-off-by: Dmitry Antipov Reported-by: syzbot+caacd220635a9cc3bac9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=caacd220635a9cc3bac9 Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 07aa4a8ebacde3d0ba50f60d2964f274ee7629bc Author: Zhang Cen Date: Mon May 25 12:17:26 2026 +0800 ocfs2: rebase copied fsdlm LVB pointers in locking_state [ Upstream commit 93612d48fa42b3d1a637eb9279e15281c611c000 ] The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw LVB. The seq snapshot already carries the inline LVB storage reserved in struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes without borrowing the original lockres lifetime. The buggy scenario involves two paths, with each column showing the order within that path: locking_state reader: lockres teardown: 1. ocfs2_dlm_seq_start()/next() 1. file release or another owner copies struct ocfs2_lock_res teardown reaches 2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free() the copied row 2. the lockres is removed from the 3. ocfs2_dlm_lvb() follows the tracking list copied sb_lvbptr 3. the owner frees the original lockres container Validation reproduced this kernel report: KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430 RIP: 0033:0x7f8ec4b1e29d The buggy address belongs to the object at ffff88810a1e0800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 368 bytes inside of freed 1024-byte region [ffff88810a1e0800, ffff88810a1e0c00) Read of size 1 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 seq_read_iter+0x29d/0x790 seq_read+0x20a/0x280 find_held_lock+0x2b/0x80 rcu_read_unlock+0x18/0x70 full_proxy_read+0x9e/0xd0 vfs_read+0x12c/0x590 ksys_read+0xd2/0x170 do_user_addr_fault+0x65a/0x890 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 ocfs2_file_open+0x13e/0x300 do_dentry_open+0x233/0x7f0 vfs_open+0x5a/0x1b0 path_openat+0x66d/0x1540 do_file_open+0x186/0x2b0 do_sys_openat2+0xce/0x150 __x64_sys_openat+0xd0/0x140 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task stack: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 ocfs2_file_release+0x138/0x260 __fput+0x1df/0x4b0 fput_close_sync+0xd2/0x170 __x64_sys_close+0x55/0x90 do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f Link: https://lore.kernel.org/20260525041726.4112882-1-rollkingzzc@gmail.com Fixes: cf4d8d75d8ab ("ocfs2: add fsdlm to stackglue") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 97860085140bcf7e5e66464eb5564858258973d3 Author: Woojin Ji Date: Wed Jun 3 09:33:39 2026 +0900 bpftool: Use libbpf error code for flow dissector query [ Upstream commit 8a7f2bff2165e53595d1e91c160b340f978c0ab7 ] bpf_prog_query() returns a negative errno on failure. query_flow_dissector() currently closes the namespace fd and then reads errno to decide whether -EINVAL means that the running kernel does not support flow dissector queries. That errno check controls behavior, not just diagnostics: -EINVAL is handled as a non-fatal old-kernel case, while any other error makes bpftool net fail. The namespace fd is opened read-only, so close() is not expected to commonly fail in normal use. Still, the BPF_PROG_QUERY error is already available in err, and reading errno after an intervening close() is fragile. If close() does change errno, the compatibility branch may be based on close()'s error instead of the BPF_PROG_QUERY result. This was reproduced with an LD_PRELOAD fault injector that forced BPF_PROG_QUERY for BPF_FLOW_DISSECTOR to fail with EINVAL and then forced close() on the netns fd to fail with EIO. The unpatched bpftool reported "can't query prog: Input/output error". With this change, the same injected failure is handled as the intended non-fatal EINVAL compatibility case. Use the libbpf-returned error code instead. Keep the existing errno reset in the non-fatal path to preserve batch mode behavior. The success path is unchanged. Fixes: 7f0c57fec80f ("bpftool: show flow_dissector attachment status") Signed-off-by: Woojin Ji Signed-off-by: Andrii Nakryiko Acked-by: Leon Hwang Acked-by: Yonghong Song Acked-by: Quentin Monnet Link: https://lore.kernel.org/bpf/20260603003339.33791-1-random6.xyz@gmail.com Assisted-by: ChatGPT:gpt-5.5 Signed-off-by: Sasha Levin commit 3e83b2203aa59bd279e4f677ec793d49dc9d019e Author: Al Viro Date: Tue May 12 00:29:37 2026 -0400 configfs_lookup(): don't leave ->s_dentry dangling on failure [ Upstream commit 10da12d352b7b2bb330a8609fdda9a58bf0e9856 ] Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,link}() - there configfs_dirent does not survive dropping the sole reference to it. However, for configfs_lookup() it *does* survive, with a dangling pointer to soon to be freed dentry sitting it its ->s_dentry. Subsequent getdents(2) in that directory will end up dereferencing that pointer in order to pick the inode number. Use after free... This is the minimal fix; the right approach is to set the linkage between dentry and configfs_dirent only after we know that we have an inode, but that takes more surgery and the bug had been there since 2006, so... Fixes: 3d0f89bb1694 ("configfs: Add permission and ownership to configfs objects") # 2.6.16-rc3 Reviewed-by: Jan Kara Reviewed-by: Breno Leitao Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit 03eea26a7d9276e650f2994147169e051672883d Author: Alexander Potapenko Date: Mon May 4 12:06:37 2026 +0200 lib/test_meminit: use && for bools [ Upstream commit 8e0c2085c978ed6d9764d79fc785920360096f21 ] As pointed out by Dan Carpenter, test_kmemcache() was using a bitwise AND on two bools instead of a boolean AND. Fix this for the sake of code cleanliness. Link: https://lore.kernel.org/20260504100637.1535762-1-glider@google.com Fixes: 5015a300a522 ("lib: introduce test_meminit module") Signed-off-by: Alexander Potapenko Reported-by: Dan Carpenter Closes: https://lore.kernel.org/kernel-janitors/afOcIan1ap9kD26M@stanley.mountain/ Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 49b9619c2c22630062e87dee98a298e8c632e3d4 Author: Sang-Heon Jeon Date: Fri Apr 17 22:58:05 2026 +0900 mm/fake-numa: fix under-allocation detection in uniform split [ Upstream commit 3a3fc1dfd6a958615ebaab8fb251e89fc2b3f2f2 ] When splitting NUMA node uniformly, split_nodes_size_interleave_uniform() returns the next absolute node ID, not the number of nodes created. The existing under-allocation detection logic compares next absolute node ID (ret) and request count (n), which only works when nid starts at 0. For example, on a system with 2 physical NUMA nodes (node 0: 2GB, node 1: 128MB) and numa=fake=8U, 8 fake nodes are successfully created from node 0 and split_nodes_size_interleave_uniform() returns 8. For node 1, fake node nid starts at 8, but only 4 fake nodes are created due to current FAKE_NODE_MIN_SIZE being 32MB, and split_nodes_size_interleave_uniform() returns 12. By existing under-allocation detection logic, "ret < n" (12 < 8) is false, so the under-allocation will not be detected. Fix under-allocation detection logic to compare the number of actually created nodes (ret - nid) against the request count (n). Also skip under-allocation detection logic for memoryless physical nodes where no fake nodes are created. Also, fix the outdated comment describing split_nodes_size_interleave_uniform() to match the actual return value. Signed-off-by: Sang-Heon Jeon Reported-by: Donghyeon Lee Reported-by: Munhui Chae Fixes: cc9aec03e58f ("x86/numa_emulation: Introduce uniform split capability") # 4.19 Link: https://patch.msgid.link/20260417135805.1758378-1-ekffu200098@gmail.com Signed-off-by: Mike Rapoport (Microsoft) Signed-off-by: Sasha Levin commit ea1c243c39e32b7fc1c2edfe32081ff7e30a877c Author: Deepanshu Kartikey Date: Tue Jun 2 08:22:49 2026 +0530 bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs [ Upstream commit b93c55b4932dd7e32dca8cf34a3443cc87a02906 ] commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF Fixes: 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") Reported-by: syzbot+36e50496c8ac4bcde3f9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=36e50496c8ac4bcde3f9 Suggested-by: Al Viro Link: https://lore.kernel.org/all/20260423043906.GN3518998@ZenIV/ Link: https://lore.kernel.org/all/20260602002607.110866-1-kartikey406@gmail.com/T/ [v1] Signed-off-by: Deepanshu Kartikey Acked-by: Al Viro Link: https://lore.kernel.org/r/20260602025249.113828-1-kartikey406@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 472152df7c99132cd022907c47b6358fc645c2da Author: Dan Carpenter Date: Sat May 30 22:45:48 2026 +0300 scsi: pm8001: Fix error code in non_fatal_log_show() [ Upstream commit 1b6f03b7ae9ee27054c55bb55a69d05555a78516 ] The non_fatal_log_show() function is supposed to return negative error codes on failure. But because the error codes are saved in a u32 and then cast to signed long, they end up being high positive values instead of negative. Remove the intermediary u32 variable to fix this bug. Fixes: dba2cc03b9db ("scsi: pm80xx: sysfs attribute for non fatal dump") Signed-off-by: Dan Carpenter Acked-by: Jack Wang Link: https://patch.msgid.link/ahs-bEsBJH0KhnsX@stanley.mountain Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 79552d8f2f760b5ff3791df67f5aafb7d32f145f Author: Martin Wilck Date: Wed May 13 19:42:36 2026 +0200 scsi: Revert "scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans" [ Upstream commit 8c292e89bd831c8a13e92f3429ef66bbe0b83677 ] This reverts commit 37c4e72b0651e7697eb338cd1fb09feef472cc1a. Said commit causes excessive resource usage and even system freeze with some controllers, e.g. smartpqi and hisi_sas. The justification provided by the patch authors [1] was supporting a special mode of the mpi3mr and mpt3sas, so-called "Tri-mode", in which NVMe drives are exposed as SCSI devices on a separate channel. While that's useful for these drivers, it seems wrong to cause major breakage for other drivers for the sake of this feature. [1] https://lore.kernel.org/linux-scsi/CAFdVvOwjy+2ORJ6uJkspiLTPF05481U7gcS4QohFOFGPqAs8ig@mail.gmail.com/ Fixes: 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans") Signed-off-by: Martin Wilck Cc: Don Brace Cc: storagedev@microchip.com Cc: Ranjan Kumar Cc: Sathya Prakash Veerichetty Cc: Kashyap Desai Cc: Sumit Saxena Cc: mpi3mr-linuxdrv.pdl@broadcom.com Cc: MPT-FusionLinux.pdl@broadcom.com Cc: Yihang Li Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260513174236.430465-3-mwilck@suse.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit d2efdd45eec69b834d74ac550066e6592efea0da Author: Yuho Choi Date: Mon May 25 00:01:58 2026 -0400 ARM: imx31: Fix IIM mapping leak in revision check [ Upstream commit ccb4b54b8ecf1ebafef96d538cd6c5c8455bb390 ] mx31_read_cpu_rev() maps the IIM registers with of_iomap() to read the silicon revision, but returns without unmapping the MMIO mapping. Keep the normalized revision value in a local variable and route the return path through iounmap() after the revision register has been read. Fixes: 3172225d45bd ("ARM: imx31: Retrieve the IIM base address from devicetree") Signed-off-by: Yuho Choi Signed-off-by: Frank Li Signed-off-by: Sasha Levin commit d3f81ace0a2e348690a4272a49f5c253b8ddf41c Author: Yuho Choi Date: Wed May 13 23:40:04 2026 -0400 ARM: imx3: Fix CCM node reference leak [ Upstream commit 36d46348eb5fc4bc505cd2290ddd70c25fbe6bb3 ] of_find_compatible_node() returns a referenced device node. The i.MX31 and i.MX35 early init paths use the node to map the CCM registers with of_iomap(), but never drop the node reference. Release the node after the mapping is created. Fixes: 2cf98d12958c ("ARM: imx3: Retrieve the CCM base address from devicetree") Signed-off-by: Yuho Choi Signed-off-by: Frank Li Signed-off-by: Sasha Levin commit 1e11378e6e589f6021b87c3abf584f7e0d3d5cc7 Author: Zhang Yi Date: Fri Apr 24 18:42:01 2026 +0800 ext4: fix LOGFLUSH shutdown ordering to allow ordered-mode data writeback [ Upstream commit d99748ef1695ce17eaf51c64b7a06952fa7cddab ] In EXT4_GOING_FLAGS_LOGFLUSH mode, the EXT4_FLAGS_SHUTDOWN flag was set before calling ext4_force_commit(). This caused ordered-mode data writeback (triggered by journal commit) to fail with -EIO, since ext4_do_writepages() checks for the shutdown flag. The journal would then be aborted prematurely before the commit could succeed. Fix this by calling ext4_force_commit() first, then setting the shutdown flag, so that pending data can be written back correctly. Note that moving ext4_force_commit() before setting the shutdown flag creates a small window in which new writes may occur and generate new journal transactions. When the journal is subsequently aborted, the new transactions will not be able to write to disk. This is intentional because LOGFLUSH's semantics are to flush pre-existing journal entries before shutdown, not to guarantee atomicity for writes that race with the ioctl. Fixes: 783d94854499 ("ext4: add EXT4_IOC_GOINGDOWN ioctl") Signed-off-by: Zhang Yi Reviewed-by: Baokun Li Reviewed-by: Jan Kara Link: https://patch.msgid.link/20260424104201.1930823-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 3cb2a606ce4902eceabe68338df0653312f861f8 Author: Chen Cheng Date: Fri May 15 17:30:19 2026 +0800 md/raid10: reset read_slot when reusing r10bio for discard [ Upstream commit 6b8a26af065ddc93de2aa5c9f0df98dce9723442 ] put_all_bios() always drops devs[i].bio, but it only drops devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an r10bio that was previously used for a read, read_slot can still be non-negative, and discard cleanup can skip bio_put() on repl_bio. Reset read_slot to -1 when preparing an r10bio for discard so the replacement bio is always released correctly. Fixes: d30588b2731f ("md/raid10: improve raid10 discard request") Signed-off-by: Chen Cheng Reviewed-by: Xiao Ni Link: https://patch.msgid.link/20260515093019.3436882-1-chencheng@fnnas.com Signed-off-by: Yu Kuai Signed-off-by: Sasha Levin commit 72fc16ca3d29a477e56eae58cf044aede2a0d66a Author: Renjiang Han Date: Tue Mar 31 10:07:09 2026 +0530 media: qcom: venus: relax encoder frame/blur step size on v6 [ Upstream commit c53e0550288b2e08b984b24035c471941b7820c7 ] Encoder HFI capabilities on v6 enforce a 16-pixel step for frame and blur dimensions, which does not reflect actual hardware requirements and can reject valid userspace configurations. Relax the step size to 1 while leaving min/max limits unchanged. Fixes: 869d77e706290 ("media: venus: hfi_plat_v6: Populate capabilities for v6") Signed-off-by: Renjiang Han Reviewed-by: Dikshita Agarwal Signed-off-by: Bryan O'Donoghue Signed-off-by: Sasha Levin commit 5124ea6ee06fab46a92a7056ae19abbe6c0639d3 Author: Renjiang Han Date: Tue Mar 31 10:07:08 2026 +0530 media: qcom: venus: relax encoder frame/blur dimension steps on v4 [ Upstream commit 35428ae3a6a40912f1f7b47bb6c65f1a63d0b8f8 ] Encoder HFI capabilities on v4 advertise a 16-pixel step for frame and blur dimensions. This is overly restrictive and can cause userspace caps negotiation to fail even for valid resolutions. Relax the advertised step size to 1 and keep alignment enforcement in buffer layout and size calculations. Fixes: 8b88cabef404e ("media: venus: hfi_plat_v4: Populate codecs and capabilities for v4") Signed-off-by: Renjiang Han Reviewed-by: Dikshita Agarwal Signed-off-by: Bryan O'Donoghue Signed-off-by: Sasha Levin commit f86e07bbc92f1c3a3c290f9bf84f6f7a38f537f0 Author: Renjiang Han Date: Tue Mar 31 10:07:07 2026 +0530 media: qcom: venus: drop extra padding in NV12 raw size calculation [ Upstream commit e1c9adabb268cc5d56723b7df1da49e59070f309 ] get_framesize_raw_nv12() currently adds SZ_4K to the UV plane size and an additional SZ_8K to the total buffer size. This inflates the calculated sizeimage and leads userspace to over-allocate buffers without a clear requirement. Remove the extra SZ_4K/SZ_8K padding and compute the NV12 size as the sum of Y and UV planes, keeping the final ALIGN(size, SZ_4K) intact. Fixes: e1cb72de702ad ("media: venus: helpers: move frame size calculations on common place") Signed-off-by: Renjiang Han Reviewed-by: Dikshita Agarwal Signed-off-by: Bryan O'Donoghue Signed-off-by: Sasha Levin commit 31b16ed562dc8856a1b6bcfe1df8599fec2a4f32 Author: zhoumin Date: Thu Mar 26 17:14:03 2026 +0800 EDAC/{skx_common,skx}: Fix UBSAN shift-out-of-bounds in skx_get_dimm_info [ Upstream commit c63ed6e1f5fe648a4a099b6717f679999be482ef ] When the skx_get_dimm_attr() helper returns -EINVAL, skx_get_dimm_info() does not validate these return values before using them in a shift operation: size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3); If all three values are -22, the shift exponent becomes -66, triggering a UBSAN shift-out-of-bounds error: UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c shift exponent -66 is negative Fixes: 88a242c98740 ("EDAC, skx_common: Separate common code out from skx_edac") Signed-off-by: zhoumin Signed-off-by: Tony Luck Link: https://patch.msgid.link/tencent_2A0CC835A18366643CBD2865B169948AB409@qq.com Signed-off-by: Sasha Levin commit 77b6fc9835dd041ed7eb01ee15036c23b4aed27e Author: Jessica Zhang Date: Sun May 24 13:33:30 2026 +0300 drm/msm/dp: Fix the ISR_* enum values [ Upstream commit 3fbfdc3b1d48cc115a86953e5df0c76cd2efc42b ] The ISR_HPD_* enum should represent values that can be read from the REG_DP_DP_HPD_INT_STATUS register. Swap ISR_HPD_IO_GLITCH_COUNT and ISR_HPD_REPLUG_COUNT to map them correctly to register values. While we are at it, correct the spelling for ISR_HPD_REPLUG_COUNT. Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Signed-off-by: Jessica Zhang Reviewed-by: Konrad Dybcio Tested-by: Val Packett # x1e80100-dell-latitude-7455 Tested-by: Yongxing Mou # Hamoa IOT EVK, QCS8300 Ride Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/727602/ Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-2-cf3ab488dd7b@oss.qualcomm.com Signed-off-by: Sasha Levin commit 8cfcbadab589d29cd44a0d933ceac7c77532bf12 Author: Jessica Zhang Date: Sun May 24 13:33:29 2026 +0300 drm/msm/dp: fix HPD state status bit shift value [ Upstream commit 2e6c2e81d81251623c458a60e2a57447dcbc988e ] The HPD state status is the 3 most significant bits, not 4 bits of the HPD_INT_STATUS register. Fix the bit shift macro so that the correct bits are returned in msm_dp_aux_is_link_connected(). Fixes: 19e52bcb27c2 ("drm/msm/dp: return correct connection status after suspend") Signed-off-by: Jessica Zhang Reviewed-by: Konrad Dybcio Tested-by: Val Packett # x1e80100-dell-latitude-7455 Tested-by: Yongxing Mou # Hamoa IOT EVK, QCS8300 Ride Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/727611/ Link: https://lore.kernel.org/r/20260524-hpd-refactor-v6-1-cf3ab488dd7b@oss.qualcomm.com Signed-off-by: Sasha Levin commit 59a0022038ec8846cf68413765f4331c6db2d81e Author: Weili Qian Date: Mon May 18 22:29:54 2026 +0800 crypto: hisilicon/qm - disable error report before flr [ Upstream commit e71dc5602b9a29027f6aedd5990d3e8c4f638c8c ] Before function level reset, driver first disable device error report and then waits for the device reset to complete. However, when the error is recovered, the error bits will be enabled again, resulting in invalid disable. It is modified to detect that there is no error before disable error report, and then do FLR. Fixes: 7ce396fa12a9 ("crypto: hisilicon - add FLR support") Signed-off-by: Weili Qian Signed-off-by: Zongyu Wu Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit acd5768c7363afec1522b1c922112458ea60d19b Author: Tetsuo Handa Date: Mon May 18 13:23:40 2026 +0900 ocfs2: kill osb->system_file_mutex lock [ Upstream commit f5b1910e23f1233c8d4185268b2e659df2bc5dbf ] Commit 43b10a20372d ("ocfs2: avoid system inode ref confusion by adding mutex lock") tried to avoid a refcount leak caused by allowing multiple threads to call igrab(inode). But addition of osb->system_file_mutex made locking dependency complicated and is causing lockdep to warn about possibility of AB-BA deadlock. Since _ocfs2_get_system_file_inode() returns the same inode for the same input arguments, we don't need to serialize _ocfs2_get_system_file_inode(). What we need to make sure is that igrab(inode) is called for only once(). Therefore, replace osb->system_file_mutex with cmpxchg()-based locking. Link: https://lore.kernel.org/fea8d1fd-afb0-4302-a560-c202e2ef7afd@I-love.SAKURA.ne.jp Fixes: 43b10a20372d ("ocfs2: avoid system inode ref confusion by adding mutex lock") Signed-off-by: Tetsuo Handa Reviewed-by: Heming Zhao Acked-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 86509c5296fe46ad6bcdd83931a53c2c6b7913a8 Author: ZhengYuan Huang Date: Tue May 12 10:41:15 2026 +0800 ocfs2: don't BUG_ON an invalid journal dinode [ Upstream commit c0438198c28b1d22c272751af5e717c11d9fa8dd ] [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel. Link: https://lore.kernel.org/20260512024115.4036371-1-gality369@gmail.com Fixes: 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") Signed-off-by: ZhengYuan Huang Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 81c06ef66c3ab6eeaa72eb790c90ae043cdb3d43 Author: Dan Carpenter Date: Fri May 8 10:51:56 2026 +0300 rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() [ Upstream commit fc15e3a30ddd950f009c76765331783b9af94a87 ] With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop. Link: https://lore.kernel.org/af2WHMZiqMwdYveO@stanley.mountain Fixes: 48618fb4e522 ("RapidIO: add mport driver for Tsi721 bridge") Signed-off-by: Dan Carpenter Cc: Alexandre Bounine Cc: Chul Kim Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit ef4fc53898bd6c4d0119cc6d419ebef7f2560f31 Author: Davidlohr Bueso Date: Mon Feb 23 12:15:16 2026 -0800 dax/kmem: account for partial discontiguous resource upon removal [ Upstream commit 8aa442cfce79e2d69e72fc8e0c0864ac2971149d ] When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed. Link: https://lore.kernel.org/20260223201516.1517657-1-dave@stgolabs.net Fixes: 60e93dc097f7 ("device-dax: add dis-contiguous resource support") Signed-off-by: Davidlohr Bueso Reviewed-by: Ben Cheatham Reviewed-by: Alison Schofield Reviewed-by: Jonathan Cameron Cc: Dan Williams Cc: Dave Jiang Cc: Vishal Verma Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 1a847c2dd282096ce6fd4c8aaedd63861a6c88d5 Author: Carlos Llamas Date: Sat May 23 16:27:21 2026 +0000 libbpf: Fix UAF in strset__add_str() [ Upstream commit b23705e6afb6ac4ae6d220dcb35975698667dd76 ] strset_add_str_mem() might reallocate the strset data buffer in order to accommodate the provided string 's'. However, if 's' points to a string already present in the buffer, it becomes dangling after the realloc. This leads to a use-after-free when attempting to memcpy() the string into the new buffer. One scenario that triggers this problematic path is when resolve_btfids attempts to patch kfunc prototypes using existing BTF parameter names: | resolve_btfids: function bpf_list_push_back_impl already exists in BTF | Segmentation fault (core dumped) Compiling resolve_btfids with fsanitize=address generates a detailed report of the UAF: | ================================================================= | ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 | ==1507892==ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 at pc 0x55d25155a2a8 bp 0x7ffcef879060 sp 0x7ffcef878818 | READ of size 5 at 0x7f4c4a500bd4 thread T0 | #0 0x55d25155a2a7 in memcpy (tools/bpf/resolve_btfids/resolve_btfids+0xcf2a7) | #1 0x55d2515d708e in strset__add_str tools/lib/bpf/strset.c:162:2 | #2 0x55d2515c730b in btf__add_str tools/lib/bpf/btf.c:2109:8 | #3 0x55d2515c9020 in btf__add_func_param tools/lib/bpf/btf.c:3108:14 | #4 0x55d25159f0b5 in process_kfunc_with_implicit_args tools/bpf/resolve_btfids/main.c:1196:9 | #5 0x55d25159e004 in btf2btf tools/bpf/resolve_btfids/main.c:1229:9 | #6 0x55d25159cee7 in main tools/bpf/resolve_btfids/main.c:1535:6 | #7 0x7f4c78e29f76 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 | #8 0x7f4c78e2a026 in __libc_start_main csu/../csu/libc-start.c:360:3 | #9 0x55d2514bb860 in _start (tools/bpf/resolve_btfids/resolve_btfids+0x30860) | | 0x7f4c4a500bd4 is located 13268 bytes inside of 2829000-byte region [0x7f4c4a4fd800,0x7f4c4a7b02c8) | freed by thread T0 here: | #0 0x55d25155b700 in realloc (tools/bpf/resolve_btfids/resolve_btfids+0xd0700) | #1 0x55d2515c426c in libbpf_reallocarray tools/lib/bpf/./libbpf_internal.h:220:9 | #2 0x55d2515c426c in libbpf_add_mem tools/lib/bpf/btf.c:224:13 | | previously allocated by thread T0 here: | #0 0x55d25155b2e3 in malloc (tools/bpf/resolve_btfids/resolve_btfids+0xd02e3) | #1 0x55d2515d6e7d in strset__new tools/lib/bpf/strset.c:58:20 While resolve_btfids could be refactored to avoid this call path, let's instead fix this issue at the source in strset__add_str() and avoid similar scenarios. Let's check if set->strs_data was reallocated and whether 's' points to an internal string within the old strset buffer. In such case, 's' is reconstructed to point to the new buffer. While already here, also fix strset__find_str() which suffers from the same problem by factoring out the common operations into a new helper function strset_str_append(). Fixes: 90d76d3ececc ("libbpf: Extract internal set-of-strings datastructure APIs") Suggested-by: Andrii Nakryiko Suggested-by: Mykyta Yatsenko Signed-off-by: Carlos Llamas Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20260523162722.2718940-1-cmllamas@google.com Signed-off-by: Sasha Levin commit 636d7196f75eec7dec20db1045c5b3f1e62089f2 Author: Timur Tabi Date: Thu Apr 30 17:38:35 2026 -0500 drm/nouveau/bios: specify correct display fuse register for Ampere and Ada [ Upstream commit c1cf2d5db80ce91a85855bbaf4da85ff603e089a ] The NV_FUSE_STATUS_OPT_DISPLAY register is used to determine whether the GPU has display hardware. The current code that normally reads this register is instead hard-coded to check for GA100 vs later GPUs. Since this function is called only on pre-Hopper GPUs, and this if-statement applies only to GA100 and later, the check works because GA100 is the only non-display Ampere and Ada GPU. However, there actually is a register that can be read, so we should use it. Fixes: a34632482f1e ("drm/nouveau/bios/ga10[024]: initial support") Signed-off-by: Timur Tabi Reviewed-by: Lyude Paul Link: https://patch.msgid.link/20260430223838.2530778-8-ttabi@nvidia.com Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin commit 3ed1708fd888337c4b609a5e0a2128e33529771a Author: Mikko Perttunen Date: Tue Apr 21 13:02:37 2026 +0900 drm/tegra: Fix iommu_map_sgtable() return value check [ Upstream commit b3f349517de8f4469c385ebb7bfdfcc148790c0f ] Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Update tegra_bo_iommu_map() to correctly check for errors from iommu_map_sgtable. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-2-fb484c07d2a1@nvidia.com Signed-off-by: Sasha Levin commit a2148827c50d40e9517b6cc4de71a32bedffe5b4 Author: Felix Gu Date: Wed Jan 28 00:43:10 2026 +0800 drm/tegra: dc: Fix device node reference leak in tegra_dc_has_output() [ Upstream commit 63a3998d792ab5c45304bf879e385a31fa923b61 ] The of_for_each_phandle() macro increments the reference count of the device node it iterates over. If the loop exits early, the reference must be released manually. In tegra_dc_has_output(), the function returns true immediately when a match is found, failing to release the current node's reference. Fix this by adding a call to of_node_put() before returning from the loop. Fixes: c57997bce423 ("drm/tegra: sor: Add Tegra186 support") Signed-off-by: Felix Gu Acked-by: Mikko Perttunen Signed-off-by: Thierry Reding Link: https://patch.msgid.link/20260128-dc-v1-1-a88205826301@gmail.com Signed-off-by: Sasha Levin commit 33373e1f378a501bc51aa73312f74295c84e3101 Author: Jiayuan Chen Date: Tue May 26 10:55:29 2026 +0800 net/sched: cls_bpf: prevent unbounded recursion in offload rollback [ Upstream commit 27db54b90bcc7c37867fe664107fa25ea6a116e4 ] Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd(). Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then swaps prog/oldprog and recursively calls itself to roll back. But bpf_tc_accept=0 makes the rollback fail too, which triggers yet another rollback frame with the same arguments, and so on until the stack is exhausted. bpf_tc_accept is just a convenient knob for the reproducer. Any driver whose tc_setup_cb_replace() fails twice in a row can hit the same loop, so this is not a netdevsim-only issue. Two ways to fix it: 1) Have the rollback call tc_setup_cb_add() on oldprog instead of re-entering cls_bpf_offload_cmd(). 2) Mark the rollback frame with a flag and skip a second-level rollback from inside it. Go with (2). It is the smaller change and keeps the original behaviour: the rollback still goes through tc_setup_cb_replace(), so the driver gets one real chance to restore its state. If that attempt also fails, we just return the original error instead of recursing. [1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u Fixes: 102740bd9436 ("cls_bpf: fix offload assumptions after callback conversion") Reviewed-by: Jakub Kicinski Signed-off-by: Jiayuan Chen Link: https://patch.msgid.link/20260526025529.24382-1-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e14db43677946bf2095febd294bb3c13ab375ab7 Author: Eric Dumazet Date: Tue May 26 14:55:28 2026 +0000 ipv6: guard against possible NULL deref in __in6_dev_stats_get() [ Upstream commit 507541c2a8eeb76c02bd2511958f73a8cfa3e1bc ] dev_get_by_index_rcu() could return NULL if the original physical device is unregistered. Found by Sashiko. Fixes: e1ae5c2ea478 ("vrf: Increment Icmp6InMsgs on the original netdev") Signed-off-by: Eric Dumazet Cc: Stephen Suryaputra Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260526145529.3587126-2-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 51eb7837b308b5439058480a8b842e0a22ef7eb1 Author: Breno Leitao Date: Sun May 24 08:19:56 2026 -0700 workqueue: drop spurious '*' from print_worker_info() fn declaration [ Upstream commit 611583a76ea97991b0f65ec1ff099eac7fe0bae4 ] print_worker_info() declares its local 'fn' as work_func_t * but worker->current_func has type work_func_t (a function pointer). The extra level of indirection is wrong and only happens to be harmless today because every supported Linux architecture has sizeof(work_func_t) == sizeof(work_func_t *): copy_from_kernel_nofault() reads the correct number of bytes by accident, and %ps still resolves the printed address because the stored value is the function address regardless of declared type. On any future ABI where sizeof(void (*)()) differs from sizeof(void *), the nofault copy would transfer the wrong number of bytes and the subsequent %ps would print an incorrect address. Match the field type so the intent is explicit and the code does not silently rely on equal pointer sizes. Fixes: 3d1cb2059d93 ("workqueue: include workqueue info when printing debug dump of a worker task") Signed-off-by: Breno Leitao Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 316b5f1168264844aa125959de1d6da2b1905795 Author: Nilay Shroff Date: Wed May 27 11:50:00 2026 +0530 nvme-multipath: fix flex array size in struct nvme_ns_head [ Upstream commit 001e57554de81aa79c25c18fd53911d8a415c304 ] struct nvme_ns_head contains a flexible array member, current_path[], which is indexed using the NUMA node ID: head->current_path[numa_node_id()] The structure is currently allocated as: size = sizeof(struct nvme_ns_head) + (num_possible_nodes() * sizeof(struct nvme_ns *)); head = kzalloc(size, GFP_KERNEL); This allocation assumes that NUMA node IDs are sequential and densely packed from 0 .. num_possible_nodes() - 1. While this assumption holds on many systems, it is not always true on some architectures such as powerpc. On some powerpc systems, NUMA node IDs can be sparse. For example: NUMA: NUMA node(s): 6 NUMA node0 CPU(s): 80-159 NUMA node8 CPU(s): 0-79 NUMA node252 CPU(s): NUMA node253 CPU(s): NUMA node254 CPU(s): NUMA node255 CPU(s): That is, the possible/online NUMA node IDs are: 0, 8, 252, 253, 254, 255 In this case: num_possible_nodes() = 6 So memory is allocated for only 6 entries in current_path[]. However, the array is later indexed using the actual NUMA node ID. As a result, accesses such as: head->current_path[8] or head->current_path[252] goes out of bounds, leading to the following KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] Write of size 8 at addr c00020003bda35b8 by task kworker/u641:2/1997 CPU: 1 UID: 0 PID: 1997 Comm: kworker/u641:2 Not tainted 7.1.0-rc5-dirty #14 PREEMPT(lazy) Hardware name: 8335-GTH POWER9 0x4e1202 opal:skiboot-v6.5.3-35-g1851b2a06 PowerNV Workqueue: async async_run_entry_fn Call Trace: [c000200037fa7510] [c0000000021c23d4] dump_stack_lvl+0x88/0xdc (unreliable) [c000200037fa7540] [c0000000009fda90] print_report+0x22c/0x67c [c000200037fa7630] [c0000000009fd508] kasan_report+0x108/0x220 [c000200037fa7740] [c0000000009fff48] __asan_store8+0xe8/0x120 [c000200037fa7760] [c008000018e76474] nvme_mpath_revalidate_paths+0x22c/0x290 [nvme_core] [c000200037fa7800] [c008000018e6556c] nvme_update_ns_info+0x4a4/0x5e0 [nvme_core] [c000200037fa7a50] [c008000018e66270] nvme_alloc_ns+0x6d8/0x1a70 [nvme_core] [c000200037fa7c20] [c008000018e679fc] nvme_scan_ns+0x3f4/0x630 [nvme_core] [c000200037fa7d10] [c00000000031f22c] async_run_entry_fn+0x9c/0x3a0 [c000200037fa7db0] [c0000000002fa544] process_one_work+0x414/0xa10 [c000200037fa7ec0] [c0000000002fbf00] worker_thread+0x320/0x640 [c000200037fa7f80] [c00000000030d0f8] kthread+0x278/0x290 [c000200037fa7fe0] [c00000000000ded8] start_kernel_thread+0x14/0x18 Allocated by task 1997 on cpu 1 at 35.928317s: The buggy address belongs to the object at c00020003bda3000 which belongs to the cache kmalloc-rnd-15-2k of size 2048 The buggy address is located 16 bytes to the right of allocated 1448-byte region [c00020003bda3000, c00020003bda35a8) The buggy address belongs to the physical page: Memory state around the buggy address: c00020003bda3480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c00020003bda3500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >c00020003bda3580: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ^ c00020003bda3600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c00020003bda3680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix this by allocating the flexible array using nr_node_ids instead of num_possible_nodes(). Since nr_node_ids represents the maximum possible NUMA node IDs, indexing current_path[] using numa_node_id() becomes safe even on systems with sparse node IDs. Fixes: f333444708f8 ("nvme: take node locality into account when selecting a path") Tested-by: Mukesh Kumar Chaurasiya (IBM) Reviewed-by: Mukesh Kumar Chaurasiya (IBM) Reviewed-by: Hannes Reinecke Reviewed-by: John Garry Reviewed-by: Christoph Hellwig Signed-off-by: Nilay Shroff Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit cad4b4cff02b91eb95df7a16de89662b2e49fe47 Author: Miquel Raynal Date: Tue May 26 16:56:27 2026 +0200 mtd: spi-nor: Drop duplicate Kconfig dependency [ Upstream commit a6470e2162e9c3779a4bd6ff3bed1b81d796e46e ] I do not think the MTD dependency is needed twice. This is likely a duplicate coming from a former rebase when the spi-nor core got cleaned up a while ago. Remove the extra line. Fixes: b35b9a10362d ("mtd: spi-nor: Move m25p80 code in spi-nor.c") Signed-off-by: Miquel Raynal Reviewed-by: Michael Walle Signed-off-by: Pratyush Yadav Signed-off-by: Sasha Levin commit 22986ba28ca43b534be3bf6f83cb428a6543f4b6 Author: Rosen Penev Date: Fri May 8 20:57:27 2026 -0700 mips: n64: add __iomem for writel call [ Upstream commit 579f5329d5df2dbcf4bb5ef398701c2501d24892 ] sparse: incorrect type in argument 2 (different address spaces) @@ expected void volatile [noderef] __iomem *mem @@ got unsigned int [usertype] * Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202105261445.AcvPd2EE-lkp@intel.com/ Fixes: baec970aa5ba ("mips: Add N64 machine type") Signed-off-by: Rosen Penev Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 19058d5e6bb6c2e38276e0dee5e452e6eacb796e Author: Rosen Penev Date: Thu May 7 21:27:24 2026 -0700 mips: ralink: mt7621: add missing __iomem [ Upstream commit 4ddaf88aadd3bd09c2eb3734c53d2864af6b144e ] raw_readl and writel calls expect pointers annotated with __iomem. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild/202211060456.cnV6IK6G-lkp@intel.com/ Fixes: cc19db8b312a ("MIPS: ralink: mt7621: do memory detection on KSEG1") Signed-off-by: Rosen Penev Reviewed-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 66e331a83579c98e14e2a1afab811169b1751232 Author: Maciej W. Rozycki Date: Mon May 4 21:14:00 2026 +0100 MIPS: DEC: Remove do_IRQ() call indirection [ Upstream commit 35554eadc1b127bb5294504a4ac8f3a5dd9e299d ] As from commit 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS") do_IRQ() is not a macro anymore and can be invoked directly from assembly code, as a tail call. Remove the dec_irq_dispatch() stub then and the indirection previously introduced with commit 187933f23679 ("[MIPS] do_IRQ cleanup"), improving performance by reducing the number of control flow changes and the overall instruction count, while fixing a compiler's complaint about a missing prototype for said stub: arch/mips/dec/setup.c:780:25: warning: no previous prototype for 'dec_irq_dispatch' [-Wmissing-prototypes] 780 | asmlinkage unsigned int dec_irq_dispatch(unsigned int irq) | ^~~~~~~~~~~~~~~~ (which gets promoted to a compilation error with CONFIG_WERROR). Fixes: 8f99a1626535 ("MIPS: Tracing: Add IRQENTRY_EXIT section for MIPS") Signed-off-by: Maciej W. Rozycki Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit cd61dadfa10afe967c8879fe0db1600116b4101e Author: Maciej W. Rozycki Date: Sat May 2 00:14:20 2026 +0100 MIPS: Fix big-endian stack argument fetching in o32 wrapper [ Upstream commit 8e0780d30b1b51248e42895b7acc7a20f147b40b ] Fix an issue in call_o32() where the upper 32-bit half of incoming n64 stack arguments is fetched and used for outgoing o32 stack arguments on big-endian platforms. This code was adapted from arch/mips/dec/prom/call_o32.S which was meant for a little-endian platform only and therefore using 32-bit loads from 64-bit stack slot locations holding incoming stack arguments resulted in correct values being retrieved for data that is expected to be 32-bit. This works on little-endian platforms where the lower 32-bit half of the 64-bit value is located at every 64-bit stack slot location. However on big-endian platforms the lower 32-bit half is instead located at offset 4 from every 64-bit stack slot location. So to fix the issue the offset of 4 would have to be used on big-endian platforms only, or alternatively a 64-bit load from the 64-bit stack slot location can be used across the board, as the subsequent 32-bit store to the corresponding outgoing stack argument slot will correctly truncate the value and cause no unpredictable result. We already take advantage of this architectural feature for the incoming arguments held in $a6 and $a7 registers, since the o32 wrapper does not know how many incoming arguments there are and consequently propagates incoming data which may not be 32-bit. Since this code is generally supposed to be used with the stack located in cached memory there is no extra overhead expected for 64-bit loads as opposed to 32-bit ones, so pick this variant for code simplicity. Fixes: 231a35d37293 ("[MIPS] RM: Collected changes") Signed-off-by: Maciej W. Rozycki Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 31064374d24dc18cf132ffb9d350f318f3274b06 Author: Jiakai Xu Date: Sat May 23 02:23:14 2026 +0000 PM: sleep: Use complete() in device_pm_sleep_init() [ Upstream commit 3855941f1e4069182c895d5093c5fa589f5b38bd ] Replace complete_all() with complete() in device_pm_sleep_init() to allow it to be called in atomic contexts without triggering a false-positive WARNING from lockdep_assert_RT_in_threaded_ctx() when CONFIG_PROVE_RAW_LOCK_NESTING is enabled. device_pm_sleep_init() may be called during device initialization while holding a raw_spinlock (e.g., from within device_initialize()), and complete_all() is unsafe in atomic contexts on PREEMPT_RT kernels. complete(), which is safe to call from any context, is sufficient here. complete_all() sets the completion count to UINT_MAX/2 (permanently signaled), while complete() increments it by 1. Since no threads can be waiting during device initialization, both are functionally equivalent. The completion is always reinitialized via reinit_completion() in dpm_clear_async_state() before each suspend/resume cycle. However, changing to complete() introduces a potential deadlock for devices with no PM support (dev->power.no_pm = true). Such devices are never added to the dpm_list and never go through dpm_clear_async_state(), so their completion is never reinitialized. A parent device waiting on a no_pm child across multiple suspend phases would consume the single-use token in the first phase and block forever in the second. Fix this by adding an early return in dpm_wait() when dev->power.no_pm is set, since no_pm devices do not participate in system suspend/resume. Fixes: 152e1d592071 ("PM: Prevent waiting forever on asynchronous resume after failing suspend") Signed-off-by: Jiakai Xu [ rjw: Subject adjustment ] Link: https://patch.msgid.link/20260523022314.2657232-1-xujiakai24@mails.ucas.ac.cn Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit e7d363c0ffa836ac1d89657686cad241392c5eb2 Author: Lianfa Weng Date: Wed May 20 13:57:58 2026 +0800 RDMA/hns: Fix warning in poll cq direct mode [ Upstream commit 3f19c2a3852e6ba75f3e92dd5edc4e07f3d07f4a ] CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 Fixes: f295e4cece5c ("RDMA/hns: Delete unnecessary callback functions for cq") Link: https://patch.msgid.link/r/20260520055759.2354037-3-huangjunxian6@hisilicon.com Signed-off-by: Lianfa Weng Signed-off-by: Junxian Huang Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 506c7c9bfd5d3c8c45f3f87d8be279c7d1e7a60c Author: Guangshuo Li Date: Mon May 18 10:19:10 2026 +0800 IB/mlx4: Fix refcount leak in add_port() error path [ Upstream commit 9a8826fdfbcd7ed2ccf745f5d54208358d939def ] After kobject_init_and_add(), the lifetime of the embedded struct kobject is expected to be managed through the kobject core reference counting. In add_port(), failure paths after kobject_init_and_add() must not free struct mlx4_port directly, because the embedded kobject is then managed by the kobject core. Freeing it directly leaves the kobject reference counting unbalanced and can lead to incorrect lifetime handling. Allocate the pkey and gid attribute arrays before kobject_init_and_add(), so failures before kobject initialization can be handled by directly freeing the allocated memory. Once kobject_init_and_add() has been called, unwind later failures by removing any successfully created sysfs groups, calling kobject_del(), and then releasing the embedded kobject with kobject_put(). Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device") Link: https://patch.msgid.link/r/20260518021910.972900-1-lgs201920130244@gmail.com Signed-off-by: Guangshuo Li Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 4780f58672ee6328accd54a95f9c00683477e499 Author: Jacob Moroni Date: Tue May 12 18:38:52 2026 +0000 RDMA/irdma: Fix out-of-bounds write in irdma_copy_user_pgaddrs [ Upstream commit 5ebb3ed757be3e04cf803026004aa0beaeb13e9b ] The irdma_copy_user_pgaddrs function loops through all of the umem DMA blocks to populate the PBLEs and will stop when either the last DMA block is reached or palloc->total_cnt is reached. The issue is that the logic for checking palloc->total_cnt would only work for non-zero values. When irdma_setup_pbles is called with lvl==0, it calls irdma_copy_user_pgaddrs with palloc->total_cnt==0, which means the only way to break out of the loop is to reach the last umem DMA block, which means it could end up going beyond the fixed size of 4 iwmr->pgaddrmem array that is used in the lvl==0 case. In the case of QP/CQ/SRQ rings, the value of lvl is determined by a separate input (for example, req.cq_pages in the case of a CQ). So, we must perform explicit checking to ensure we don't overflow the pgaddrmem array if the user provides a umem that consists of more blocks than their provided req.cq_pages. Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Link: https://patch.msgid.link/r/20260512183852.614045-1-jmoroni@google.com Signed-off-by: Jacob Moroni Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin commit 9cf971793d7fce7a328b499e5801147e0f1f9e24 Author: Samuel Holland Date: Sun Mar 1 17:49:39 2026 +0300 bus: sunxi-rsb: Always check register address validity [ Upstream commit 61192938a5870ac36edae81e4775b680dcf02c61 ] The register address was already validated for read operations in regmap_sunxi_rsb_reg_read before being truncated to a u8. Write operations have the same set of possible addresses, and the address is being truncated from u32 to u8 here as well, so the same check is needed. Signed-off-by: Samuel Holland Signed-off-by: Andrey Skvortsov Fixes: d787dcdb9c8f ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus") Reviewed-by: Chen-Yu Tsai Reviewed-by: Jernej Skrabec Link: https://patch.msgid.link/20260301144939.1832806-1-andrej.skvortzov@gmail.com Signed-off-by: Chen-Yu Tsai Signed-off-by: Sasha Levin commit ed590d06e429f8bd297bbee7228ff9a6b9e64e0b Author: Ronaldo Nunez Date: Fri May 22 16:13:48 2026 -0300 pwm: imx27: Fix variable truncation in .apply() [ Upstream commit dc9e08fdbcc3eb08a1d2b868b535081c44425e27 ] Fix a variable truncation when calculating period in microseconds as part of the solution for the ERR051198 in .apply() callback. Example scenario: - Period of 3us (PWMPR = 196 and prescaler = 1) - Expected value in tmp: 198000000000 (NSEC_PER_SEC * (196 + 2) * 1) - Actual value is 431504384 (truncation to u32) Signed-off-by: Ronaldo Nunez Reviewed-by: Frank Li Link: https://patch.msgid.link/20260522191348.6227-1-rnunez@baylibre.com Fixes: a25351e4c774 ("pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle") Signed-off-by: Uwe Kleine-König Signed-off-by: Sasha Levin commit cd8e505585d070988f3fd15a5a571d9599ea7725 Author: Lifeng Zheng Date: Fri May 22 09:49:10 2026 +0530 cpufreq: conservative: Simplify frequency limit handling [ Upstream commit 3494dff89779b73a6c70481c982e0e96d336454a ] cs_dbs_update() performs explicit checks against policy->min/max before updating the target frequency. These checks are redundant as __cpufreq_driver_target() already clamps the requested frequency to the valid policy limits. Remove the unnecessary boundary checks and simplify the update logic. This also fixes an issue introduced by commit 00bfe05889e9 ("cpufreq: conservative: Decrease frequency faster for deferred updates"), where stale target comparisons could cause frequency updates to be skipped entirely after deferred adjustments. Closes: https://lore.kernel.org/all/20260421123545.1745998-1-zhenglifeng1@huawei.com/ Fixes: 00bfe05889e9 ("cpufreq: conservative: Decrease frequency faster for deferred updates") Signed-off-by: Lifeng Zheng Co-developed-by: Viresh Kumar Signed-off-by: Viresh Kumar Reviewed-by: Zhongqiu Han Link: https://patch.msgid.link/292e6d937890f135e30ec0d2107eaad47cb9a976.1779423281.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit ac390c81dd888ada712c7370fa3845b437cc6d4b Author: Pengjie Zhang Date: Mon May 18 21:34:57 2026 +0800 cpufreq: Documentation: fix sampling_down_factor range [ Upstream commit 85524e651d20944399322d46fb97960337831d43 ] The ondemand governor implementation accepts sampling_down_factor values from 1 to 100000 via MAX_SAMPLING_DOWN_FACTOR, but the documentation in admin-guide/pm/cpufreq.rst still says the valid range is 1 to 100. Update the documentation to match the actual code. Fixes: 2a0e49279850 ("cpufreq: User/admin documentation update and consolidation") Reviewed-by: Zhongqiu Han Signed-off-by: Pengjie Zhang Link: https://patch.msgid.link/20260518133457.2408463-1-zhangpengjie2@huawei.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 8eb6110099d4a666e81bd4c3e5f395941caec3fe Author: Stepan Ionichev Date: Thu May 14 22:14:55 2026 +0500 device property: fix fwnode reference leak in fwnode_graph_get_endpoint_by_id() [ Upstream commit 9582485a65eacfd7245ec7f0a9d7e2c34749d669 ] When called with FWNODE_GRAPH_ENDPOINT_NEXT, the function walks every endpoint under the requested port and, for any endpoint whose ID is greater than or equal to the requested one, may store a fwnode reference in best_ep via fwnode_handle_get(). If a later iteration finds an exact-ID match, the function returns that endpoint directly without dropping the reference held by best_ep, leaking it. Drop the saved candidate before returning the exact-match endpoint. This affects callers that use FWNODE_GRAPH_ENDPOINT_NEXT to ask for the next endpoint with ID >= the requested one (used by a number of media drivers, e.g. imx7/8, sun6i CSI, omap3isp, xilinx-csi2, stm32-csi). Each leak retains a fwnode reference until reboot/unbind. Fixes: 0fcc2bdc8aff ("device property: Add fwnode_graph_get_endpoint_by_id()") Signed-off-by: Stepan Ionichev Link: https://patch.msgid.link/20260514171455.27271-1-sozdayvek@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 01613f5e4ff6c080260615392338e92e261d109b Author: Geert Uytterhoeven Date: Fri May 15 11:59:15 2026 +0200 firmware: arm_scmi: Fix OOB in scmi_power_name_get() [ Upstream commit f9ef3f66f4b18078e464b7606f9497e4dbeb9905 ] scmi_power_name_get() does not validate the domain number passed by the external caller, which may lead to an out-of-bounds access. Fix this by returning "unknown" for invalid domains, like scmi_reset_name_get() does. Fixes: 76a6550990e296a7 ("firmware: arm_scmi: add initial support for power protocol") Signed-off-by: Geert Uytterhoeven Reviewed-by: Cristian Marussi Link: https://patch.msgid.link/75caae28bdffb55199a0bc6cac5df112a966c608.1778838987.git.geert+renesas@glider.be Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 2a1dba4febf491c15e679da299c335fa0af0d63b Author: Sven Püschel Date: Thu May 21 00:44:11 2026 +0200 media: rockchip: rga: fix too small buffer size [ Upstream commit 65017e26c065d1240b0512c15867ef1128034fd8 ] Fix the command buffer size being only a quarter of the actual size. The RGA_CMDBUF_SIZE macro was potentially intended to specify the length of the cmdbuf u32 array pointer. But as it's used to specify the size of the allocation, which is counted in bytes. Therefore adjust the macro size to bytes as it better matches the variable name and adjust it's users accordingly. As the command buffer is relatively small, it probably didn't caused an issue due to being smaller than a single page. Fixes: f7e7b48e6d79 ("[media] rockchip/rga: v4l2 m2m support") Reviewed-by: Nicolas Dufresne Signed-off-by: Sven Püschel Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 799181168e0005ca5ade9d8f33924b97745386ec Author: Eric Dumazet Date: Tue May 19 09:46:17 2026 +0000 net/sched: sch_drr: annotate data-races around cl->deficit [ Upstream commit c67b104fd7982162885c5e43057ca761006748e2 ] drr_dump_class_stats() runs without qdisc spinlock held. Add missing READ_ONCE()/WRITE_ONCE() annotations around cl->deficit. Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump") Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260519094618.2632073-2-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e713f90b0d070118a67868f05203f62cdfd390cd Author: Greg Kroah-Hartman Date: Wed May 20 15:07:01 2026 +0200 sysfs: clamp show() return value in sysfs_kf_read() [ Upstream commit 454257f6d124a92342dcbb7710c03dd6ef96c731 ] sysfs_kf_seq_show() defends against buggy show() callbacks that return larger than PAGE_SIZE by clamping the value and printing a warning. sysfs_kf_read(), the prealloc variant, has no such defense. The only current in-tree user of __ATTR_PREALLOC is drivers/md/md.c, whose show() callbacks are well-behaved, so this is hardening against future drivers doing foolish things and out-of-tree code doing even more foolish things. Cc: NeilBrown Cc: Tejun Heo Fixes: 2b75869bba67 ("sysfs/kernfs: allow attributes to request write buffer be pre-allocated.") Assisted-by: gregkh_clanker_t1000 Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Danilo Krummrich Link: https://patch.msgid.link/2026052000-drove-unicycle-d61b@gregkh Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 54de6826e39416efba89e161ea0bcefe4043be7c Author: Sudeep Holla Date: Sun May 17 20:02:40 2026 +0100 firmware: arm_scmi: Read sensor config as 32-bit value [ Upstream commit f6fe7c3c007df18afd289ff2d98c692fae9ab085 ] The SENSOR_CONFIG_GET response contains a 32-bit sensor_config field, and the xfer is initialized with a 4-byte RX buffer. Reading it with get_unaligned_le64() can consume bytes past the returned payload. Use get_unaligned_le32() to match the protocol layout and the allocated response size. Fixes: 7b83c5f41088 ("firmware: arm_scmi: Add SCMI v3.0 sensor configuration support") Link: https://patch.msgid.link/20260517-scmi_fixes-v1-1-d86daec4defd@kernel.org Reviewed-by: Cristian Marussi Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit dec1b89f167182f7fce656b4adfc928c1c0e8f78 Author: Zilin Guan Date: Tue Feb 3 16:31:34 2026 +0000 media: atomisp: Fix memory leak in atomisp_fixed_pattern_table() [ Upstream commit 4e8156bd9517fa18c3613ea39c222c7035f0221e ] atomisp_v4l2_framebuffer_to_css_frame() allocates memory for temporary variable raw_black_frame, which must be released via ia_css_frame_free() before the function returns. However, if sh_css_set_black_frame() fails, the function returns immediately without performing this cleanup, leading to a memory leak. Fix this by assigning the return value of sh_css_set_black_frame() to ret. This ensures that the error code is propagated while allowing the execution to fall through to the ia_css_frame_free() cleanup call. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We performed build testing on x86_64 with allyesconfig. Since triggering this error path in atomisp requires specific Intel Atom ISP hardware and firmware, we were unable to perform runtime testing and instead verified the fix according to the code logic. Fixes: 85b606e02ad7 ("media: atomisp: get rid of a bunch of other wrappers") Signed-off-by: Zilin Guan Reviewed-by: Andy Shevchenko Signed-off-by: Sakari Ailus Signed-off-by: Sasha Levin commit 3efa5301137140a3ca3677a9098c0a93a0acfd49 Author: Sara Venkatesh Date: Mon May 4 01:00:36 2026 -0700 RDMA/srpt: fix integer overflow in immediate data length check [ Upstream commit eb4ecdf631fe00e8020bf461503cb9b7017ed796 ] imm_buf->len is a user-controlled uint32_t received from the network. Adding it to imm_data_offset without overflow checking allows a malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap around to a small value, bypassing the bounds check, and subsequently passing a ~4GB length to sg_init_one(). Use check_add_overflow() to detect wrapping before the comparison. Fixes: 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data") Reported-by: Carlos Bilbao (Lambda) Signed-off-by: Sara Venkatesh Link: https://patch.msgid.link/20260504080036.3482415-1-sarajvenkatesh@gmail.com Reviewed-by: Carlos Bilbao (Lambda) Reviewed-by: Bart Van Assche Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 9be9aca28424228586fe9211c373ebdb826ebb6c Author: Prathamesh Deshpande Date: Tue Apr 28 23:42:49 2026 +0100 RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference [ Upstream commit 43f8f7946814c8e5f464518246fdbc69b6e32326 ] MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list before initializing the fields used by the shared error path. If eventfd_ctx_fdget() then fails, the unwind path dereferences event_sub->ev_file in uverbs_uobject_put() and calls subscribe_event_xa_dealloc() with an unset xa_key_level1. subscribe_event_xa_alloc() creates the XA entry exactly once for a given key_level1, on the first occurrence of that key. The unwind path must therefore call subscribe_event_xa_dealloc() exactly once for it as well. Enforce that by adding devx_key_in_sub_list() and calling subscribe_event_xa_dealloc() only when the last matching pending entry is being cleaned up. Fixes: 759738537142 ("IB/mlx5: Enable subscription for device events over DEVX") Signed-off-by: Prathamesh Deshpande Link: https://patch.msgid.link/20260428224319.37682-1-prathameshdeshpande7@gmail.com Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit b9f4ab3f80d4d84c9d9a818893a8d427c1cc3cb6 Author: Alexander Chesnokov Date: Mon Apr 13 12:14:43 2026 +0300 RDMA/hns: Fix arithmetic overflow in calc_hem_config() [ Upstream commit a38e4410af9ad8b7ad2217254da06cd4dc21f0ed ] If bt_num is 3 or 2, then the expressions like l0_idx * chunk_ba_num + l1_idx are computed in 32-bit arithmetic before being assigned to a u64 index field, which can lead to overflow. Cast the first operand to u64 to ensure the arithmetic is performed in 64-bit. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2f49de21f3e9 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing") Signed-off-by: Alexander Chesnokov Link: https://patch.msgid.link/20260413091527.39990-1-Alexander.Chesnokov@kaspersky.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit d21be7d051012c6b572fa4e3334443c250216f7b Author: Linmao Li Date: Wed May 13 10:55:09 2026 +0800 ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD [ Upstream commit 627ac78f2741e2ebd2225e2e953b6964a8a9182f ] addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault: 0000 [#1] SMP NOPTI CPU: 4 PID: 217 Comm: kworker/4:1 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:ipv6_del_addr+0xe9/0x280 RAX: dead000000000122 Call Trace: addrconf_dad_stop+0x113/0x140 addrconf_dad_work+0x28c/0x430 process_one_work+0x1eb/0x3b0 worker_thread+0x4d/0x400 kthread+0x104/0x140 ret_from_fork+0x35/0x40 Fold the addrconf_dad_end() logic into addrconf_dad_failure() under a single ifp->lock critical section. The STABLE_PRIVACY branch temporarily drops ifp->lock around address regeneration, so at lock_errdad: verify the state is still POSTDAD before transitioning to ERRDAD; bail out otherwise to avoid overwriting a state set by another path while the lock was released. Fixes: c15b1ccadb32 ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by: Linmao Li Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260513025509.3776405-1-lilinmao@kylinos.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit de792313486bc1c215e9dc331db8ba96b632e68e Author: Eric Dumazet Date: Thu May 14 09:59:33 2026 +0000 net/sched: sch_htb: annotate data-races (I) [ Upstream commit e54c33503bf7cebb1c1790251ce90f1252678081 ] htb_dump() runs without holding qdisc spinlock. Add missing READ_ONCE()/WRITE_ONCE() annotations around q->overlimits and q->direct_pkts. Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump") Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260514095935.3926276-3-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 117149519b05fd819bd917c5d60284b91a8016f2 Author: Eric Dumazet Date: Thu May 14 09:59:32 2026 +0000 net/sched: sch_htb: do not change sch->flags in htb_dump() [ Upstream commit 9b949fa69129e4b694ed11ee3be6d6edd4a9b8f4 ] htb_dump() runs without holding qdisc spinlock. It is illegal to touch sch->flags with non locked RMW, as concurrent readers might see intermediate wrong values. Set TCQ_F_OFFLOADED in control path (htb_init()) instead. Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260514095935.3926276-2-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 13b4d5e055d344e34b864bced0a591ceaac7ad81 Author: Sean Christopherson Date: Mon May 4 15:28:12 2026 -0700 crypto: ccp - Treat zero-length cert chain as query for blob lengths [ Upstream commit ef8c9dacda2871accd64e3eda951fef6b788b1ea ] When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: [] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [] vfs_ioctl fs/ioctl.c:52 [inline] [] __do_sys_ioctl fs/ioctl.c:598 [inline] [] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0). Fixes: 76a2b524a4b1 ("crypto: ccp: Implement SEV_PDH_CERT_EXPORT ioctl command") Signed-off-by: Sean Christopherson Reviewed-by: Tom Lendacky Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 878da047db1f2fe01f4db3df77246d292f214425 Author: Eric Dumazet Date: Wed May 13 08:08:53 2026 +0000 net/sched: sch_hfsc: annotate data-races in hfsc_dump_class_stats() [ Upstream commit e300c7d470ad2726d6abf7d11b31b5d9912d9cf0 ] hfsc_dump_class_stats() runs without qdisc spinlock being held. Add READ_ONCE()/WRITE_ONCE() annotations around: - cl->level - cl->cl_vtperiod - cl->cl_total - cl->cl_cumul Fixes: edb09eb17ed8 ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump") Signed-off-by: Eric Dumazet Reviewed-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20260513080853.1383975-4-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ca2ab416192f38645343fc91c62b5c89c5c720f9 Author: Rafael J. Wysocki Date: Tue May 5 13:36:56 2026 +0200 thermal: hwmon: Fix critical temperature attribute removal [ Upstream commit c2114dbda05354dbcf4dfbb30a2c623e8611c43a ] Since the return value of thermal_zone_crit_temp_valid() depends on the behavior of the thermal zone .get_crit_temp() callback which may change over time in theory, thermal_remove_hwmon_sysfs() may attempt to remove a critical temperature attribute that has not been created, passing a pointer to an uninitialized attribute structure to device_remove_file(). To avoid that, set a flag in struct thermal_hwmon_temp after creating a critical temperature attribute and use the value of that flag to decide whether or not the attribute needs to be removed. Fixes: e8db5d6736a7 ("thermal: hwmon: Make the check for critical temp valid consistent") Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/2437056.ElGaqSPkdT@rafael.j.wysocki Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 8df81954d22a653a8b01d46692cd56f71137269b Author: Pengpeng Hou Date: Thu Apr 23 23:30:00 2026 +0800 evm: terminate and bound the evm_xattrs read buffer [ Upstream commit 11143a19f5b8dc8f414deab87571134f9f447313 ] evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer(). Fixes: fa516b66a1bf ("EVM: Allow runtime modification of the set of verified xattrs") Signed-off-by: Pengpeng Hou Reviewed-by: Roberto Sassu Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin commit 42508383848316ac8422572f928558f5443fffad Author: Lin He Date: Sat May 9 11:23:02 2026 +0800 drm/hisilicon/hibmc: use clock to look up the PLL value [ Upstream commit 99ef3a4f1c1813cabd50bb3e8522e85e00838bb2 ] In the past, we use width and height to look up our PLL value. But actually the actual clock check is also necessnary. There are some resolutions that width and height same, but its clock different. Add the clock check when using pll_table to determine the PLL value. Fixes: da52605eea8f ("drm/hisilicon/hibmc: Add support for display engine") Signed-off-by: Lin He Signed-off-by: Yongbang Shi Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260509032302.2057227-5-shiyongbang@huawei.com Signed-off-by: Sasha Levin commit bc1a9e4d48556f391a6017593ba195c824ee992b Author: Lin He Date: Sat May 9 11:23:01 2026 +0800 drm/hisilicon/hibmc: move display contrl config to hibmc_probe() [ Upstream commit de2a56c71f9b223922ea8fe0192d3c1fa2954608 ] If there's no VGA output, this encoder modeset won't be called, which will cause displaying data from GPU being cut off. It's actually a common display config for DP and VGA, so move the vdac encoder modeset to driver load stage. Removed invalid bit configurations from `hibmc_display_ctrl` Fixes: 5294967f4ae4 ("drm/hisilicon/hibmc: Add support for VDAC") Signed-off-by: Lin He Signed-off-by: Yongbang Shi Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260509032302.2057227-4-shiyongbang@huawei.com Signed-off-by: Sasha Levin commit ba233496e215ac6d87854be5f30fe2d20b3b7af3 Author: Cristian Marussi Date: Fri May 8 16:32:46 2026 +0100 clk: scmi: Fix clock rate rounding [ Upstream commit d0c81a38d06d446d341532700b3a4a43d3b00eb1 ] While the do_div() helper used for rounding expects its divisor argument to be a 32bits quantity, the currently provided divisor parameter is a 64bit value that, as a consequence, is silently truncated and a possible source of bugs. Fix by using the proper div64_ul helper. Cc: Michael Turquette Cc: Stephen Boyd Cc: linux-clk@vger.kernel.org Fixes: 7a8655e19bdb ("clk: scmi: Fix the rounding of clock rate") Signed-off-by: Cristian Marussi Tested-by: Florian Fainelli Tested-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260508153300.2224715-2-cristian.marussi@arm.com Reviewed-by: Brian Masney Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin commit 6b116b9aaeca4765d632682db25424c0b873c6d0 Author: Sean Christopherson Date: Fri Mar 14 20:21:48 2025 -0700 iommu/amd: Fix a stale comment about which legacy mode is user visible [ Upstream commit 4bf53c2d0c08bbdaa32f2114281f1ddab61902bf ] Update a stale comment about which of the legacy modes is visible to the user, i.e. can be forced via amd_iommu_intr=legacy. Fixes: b74aa02d7a30 ("iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system") Signed-off-by: Sean Christopherson Reviewed-by: Vasant Hegde Reviewed-by: Wei Wang Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit 7016377699b5b25b7ec3c0bf2ec3f983c7e95f7c Author: Weiming Shi Date: Thu Apr 30 10:36:34 2026 -0700 crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents [ Upstream commit f7dd32c5179d7755de18e21d5674b08f9e5cb180 ] pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure. Fixes: af316fc442ef ("pefile: Digest the PE binary and compare to the PKCS#7 data") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit ac8549e5e8dfc30b606cd4bb73b03d436bcacd47 Author: Thorsten Blum Date: Sat May 2 21:09:04 2026 +0200 crypto: ecrdsa - fix unknown OID check in ecrdsa_param_curve [ Upstream commit 2d7b2cfc59998baf5e8622a24dc28f69a5212e06 ] The ->curve_oid check in ecrdsa_param_curve() rejects the valid enum value 0 (OID_id_dsa_with_sha1), but look_up_OID() returns OID__NR on lookup failure. Compare ->curve_oid with OID__NR instead to ensure that only unknown OIDs return -EINVAL. Fixes: 0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm") Signed-off-by: Thorsten Blum Reviewed-by: Lukas Wunner Reviewed-by: Vitaly Chikunov Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 9039bb4f238474379221fc933c34f19f0cba501b Author: Lothar Rubusch Date: Sun Apr 26 21:29:47 2026 +0000 crypto: atmel-sha204a - fix blocking and non-blocking rng logic [ Upstream commit 319400fc5ee15db5793aa45f854968141326effc ] The blocking and non-blocking paths were failing to provide valid entropy due to improper buffer management. Reading the buffer starting from byte 1, only fetch the 32 bytes of random data from the return message. Tested on an Atmel SHA204A device. Before (here for blocking), tests showed repeatedly reading reduced bytes. $ head -c 32 /dev/hwrng | hexdump -C 00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 After, the result will be similar to the following: $ head -c 32 /dev/hwrng | hexdump -C 00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i| 00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.| 00000020 Fixes: da001fb651b0 ("crypto: atmel-i2c - add support for SHA204A random number generator") Suggested-by: Ard Biesheuvel Signed-off-by: Lothar Rubusch Tested-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 88279dc4b63b7812a650484b71a6e762a5d51402 Author: Felix Gu Date: Mon May 4 22:53:26 2026 +0800 pinctrl: sunxi: fix regulator leak in sunxi_pmx_request() error path [ Upstream commit 334f7bcbdc79dc8e5b938ac3372453a5368221cf ] In the error path of sunxi_pmx_request(), the code calls regulator_put(s_reg->regulator) to release the regulator. However, s_reg->regulator is only assigned after a successful regulator_enable(). This causes a memory leak: the regulator obtained via regulator_get() is never properly released when regulator_enable() fails. Fixes: dc1445584177 ("pinctrl: sunxi: Fix and simplify pin bank regulator handling") Signed-off-by: Felix Gu Reviewed-by: Andre Przywara Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin commit a15d2412192e9994b5d723bfdff4730116c264e1 Author: Samuel Holland Date: Tue Apr 7 01:14:40 2026 +0300 media: cedrus: Fix failure to clean up hardware on probe failure [ Upstream commit f0a22f1d602ed499a192284de5e811a73421f0c7 ] If V4L2 device fails to register, then SRAM still be claimed and as a result driver will not be able to probe again. cedrus 1c0e000.video-codec: Failed to claim SRAM cedrus 1c0e000.video-codec: Failed to probe hardware cedrus 1c0e000.video-codec: probe with driver cedrus failed with error -16 cedrus_hw_remove undoes everything that was previously done by cedrus_hw_probe, such as disabling runtime power management and releasing the claimed SRAM and reserved memory region. Signed-off-by: Samuel Holland Signed-off-by: Andrey Skvortsov Fixes: 50e761516f2b ("media: platform: Add Cedrus VPU decoder driver") Acked-by: Paul Kocialkowski Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 98372e94eb0878416cb8ab647ced65b92ade8096 Author: Felix Gu Date: Mon Feb 23 19:59:20 2026 +0800 watchdog: sprd_wdt: Remove redundant sprd_wdt_disable() on register failure [ Upstream commit 96b3cfc3b8ad0524d12fed1e08bc5df3ff345f64 ] The driver uses devm_add_action_or_reset() to register sprd_wdt_disable() as a managed cleanup action. When devm_watchdog_register_device() fails, the devm core will invoke the cleanup action automatically. The explicit sprd_wdt_disable() call in the error path is therefore redundant and results in adouble cleanup. Fixes: 78d9bfad2e89 ("watchdog: sprd_wdt: Convert to use device managed functions and other improvements") Signed-off-by: Felix Gu Reviewed-by: Guenter Roeck Reviewed-by: Baolin Wang Link: https://lore.kernel.org/r/20260223-sprd_wdt-v1-1-2e71f9a76ecb@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 97fe74b66e13d055c10078692d8133dc624199c9 Author: Yingjie Gao Date: Thu Apr 2 15:16:17 2026 +0800 watchdog: sp5100_tco: Use EFCH MMIO for newer Hygon FCH [ Upstream commit 4f675f036cd5e9cfbe6df5f24f8338158af96a4b ] Commit 009637de1f65 ("watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)") added Hygon vendor matching to the efch layout selection, but newer Hygon 0x790b SMBus devices still need the efch_mmio path. The efch_mmio path enables EFCH_PM_DECODEEN_WDT_TMREN before probing the watchdog MMIO block. If firmware leaves that bit clear and the driver picks the legacy efch path instead, probe falls back to the alternate window and fails with "Watchdog hardware is disabled". Select efch_mmio for Hygon 0x790b devices with revision 0x51 or later, matching the equivalent AMD behavior and allowing the watchdog to initialize on those systems. Fixes: 009637de1f65 ("watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)") Signed-off-by: Yingjie Gao Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20260402071617.634563-2-gaoyingjie@uniontech.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit a86ebb8939645ec6c4e7f15547b7fdeb69230004 Author: Jihed Chaibi Date: Wed Mar 25 23:34:11 2026 +0100 ARM: dts: am335x-sl50: Fix audio bitclock and frame master endpoint [ Upstream commit 2bc564f46b00dc4f4331fc337277ff3f5fac8a4e ] The cpu_endpoint in mcasp0 specifies the TLV320AIC3106 codec as the bitclock and frame master, but the phandles point to the codec's port node (codec_port) rather than its endpoint node (codec_endpoint). audio-graph-card calls simple_util_parse_daifmt() with ep_codec set to the endpoint node (codec_endpoint). The function resolves the bitclock-master phandle and checks whether it equals ep_codec. Since codec_port is the parent of codec_endpoint, not the endpoint itself, the comparison always evaluates to false. This causes the mcasp0 CPU side to be silently configured as bitclock and frame master instead of the codec, which is the opposite of the intended configuration. Fix by pointing bitclock-master and frame-master to codec_endpoint. Fixes: e5f89dbdebc5 ("ARM: dts: am335x-sl50: use audio-graph-card for sound") Signed-off-by: Jihed Chaibi Link: https://patch.msgid.link/20260325223411.123666-1-jihed.chaibi.dev@gmail.com Signed-off-by: Kevin Hilman (TI) Signed-off-by: Sasha Levin commit 734db72d55ca578a344dfa33e30145032c074b25 Author: Tristan Madani Date: Wed Apr 15 22:23:43 2026 +0000 wifi: ath9k: fix OOB access from firmware tx status queue ID [ Upstream commit 7ce2f118a2389e8f0a64068c6fe7cc7d40639be0 ] ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index. Fixes: fce041beb03f ("ath9k: unify edma and non-edma tx code, improve tx fifo handling") Signed-off-by: Tristan Madani Acked-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20260415222343.1540564-1-tristmd@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit 93085ce89ae6ce32199f6348e2f088120fdc986a Author: Xingjing Deng Date: Fri Mar 6 02:17:09 2026 +0000 kconfig: fix potential NULL pointer dereference in conf_askvalue [ Upstream commit b9d21c32dca2167a614e66c9e27999b9e1c33d55 ] In conf_askvalue(), the 'def' argument (retrieved via sym_get_string_value) can be NULL. While current call sites ensure that 'def' is valid, calling printf("%s\n", def) is technically undefined behavior and could lead to a segmentation fault on certain libc implementations if the function were called with a NULL pointer in the future. Improve the robustness of conf_askvalue() by providing an empty string as a fallback. Additionally, remove the redundant re-initialization of the 'line' buffer inside the !sym_is_changeable(sym) block, as it is already properly initialized at the function entry. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xingjing Deng Reviewed-by: Nathan Chancellor Link: https://patch.msgid.link/20260306021709.27068-1-micro6947@gmail.com Signed-off-by: Nathan Chancellor Signed-off-by: Sasha Levin commit 45abc14ab3f15da7d689f1a8809c1a01240a94d9 Author: Tristan Madani Date: Tue Apr 21 11:14:34 2026 +0000 wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer [ Upstream commit 6e76e9ed273dfb4b3333a5ebbb94958cc5752ab6 ] In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478), causing an out-of-bounds read from the pre-allocated DMA buffer when skb_put_data copies new_len bytes. The USB transport already validates this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the PCIe path does not. Add a check that new_len does not exceed the DMA buffer size. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tristan Madani Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20260421111434.3389674-1-tristmd@gmail.com Signed-off-by: Sasha Levin commit 51b3e1de53ee5b7775c7ff90e67fdb2665fce938 Author: Danilo Krummrich Date: Sat Apr 18 18:22:18 2026 +0200 driver core: use READ_ONCE() for dev->driver in dev_has_sync_state() [ Upstream commit e9506871a8ea304cde48ff4a57226df2aadddae3 ] dev_has_sync_state() reads dev->driver twice without holding device_lock() -- once for the NULL check and once to dereference ->sync_state. Some callers only hold device_links_write_lock, which doesn't prevent a concurrent unbind from clearing dev->driver via device_unbind_cleanup(). Fix it by reading dev->driver exactly once with READ_ONCE(), pairing with the WRITE_ONCE() in device_set_driver(). Link: https://lore.kernel.org/driver-core/DHW8QPU1VU1F.3P6PH69HLFBYC@kernel.org/ Fixes: ac338acf514e ("driver core: Add dev_has_sync_state()") Reviewed-by: Rafael J. Wysocki (Intel) Acked-by: Greg Kroah-Hartman Reviewed-by: Saravana Kannan Link: https://patch.msgid.link/20260418162221.1121873-1-dakr@kernel.org Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin commit 919e3e398bf301c6418dffdcd5e5c4fd9be39cf7 Author: Yuho Choi Date: Thu Apr 16 15:55:37 2026 -0400 drm/radeon: fix memory leak in radeon_ring_restore() on lock failure [ Upstream commit 82f1d6042611d45b8b9de423bbcb4e0ced9ec62b ] radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the error. Fixes: 55d7c22192be ("drm/radeon: implement ring saving on reset v4") Signed-off-by: Yuho Choi Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 7e97a71e3989814a2cf790b5f43b92342d45b81e Author: Tomi Valkeinen Date: Wed Mar 11 11:14:43 2026 +0200 drm/tidss: Drop extra drm_mode_config_reset() call [ Upstream commit f468fef38716f667e805e0fa2c497c6b9c325bb9 ] We are calling drm_mode_config_reset() twice at probe time. There's no reason for this and the second call can be removed, reducing work at probe time slightly. Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Acked-by: Maxime Ripard Link: https://patch.msgid.link/20260311-tidss-minor-fixes-v2-1-cb4479784458@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin commit 8e9b8b008f4036df0318870c5d754134ff1b94cc Author: Ian Bridges Date: Wed Jun 24 16:11:36 2026 -0500 fbcon: fix NULL pointer dereference for a console without vc_data commit 5fae9a928482d4845bca169a3a098789203a1ca4 upstream. fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc_data. Check vc_data before setting the mode in fbcon_set_disp(), and clear the mode in fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips such consoles. Reported-by: syzbot+42525d636f430fd5d983@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=42525d636f430fd5d983 Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Ian Bridges Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 1d73bd0da72460ffdca9d63eec849cefcef3b753 Author: David Howells Date: Wed Jun 24 17:38:11 2026 +0100 afs: Fix further netns teardown to cancel the preallocation charger commit 2daf8ac812c3d78c642fe7652f62e29df5e3da20 upstream. When an afs network namespace is torn down, it cancels and waits for the work item that keeps the preallocated rxrpc call/conn/peer queue charged before disabling incoming (i.e. listen 0), but there's a small window in which it can be requeued by an incoming call wending through the I/O thread. Fix this by cancelling the charger work item again after reducing the listen backlog to zero. Fixes: 47694fbc9d24 ("afs: Fix netns teardown to cancel the preallocation charger") Reported-by: Jakub Kicinski Signed-off-by: David Howells Link: https://sashiko.dev/#/patchset/20260609140911.838677-1-dhowells%40redhat.com cc: Li Daming cc: Ren Wei cc: Marc Dionne cc: Jeffrey Altman cc: Simon Horman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Link: https://patch.msgid.link/20260624163819.3017002-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d648cc2069eb081707c061849046d909f57c78b1 Author: Matvey Kovalev Date: Mon Jun 22 10:08:37 2026 +0100 afs: fix NULL pointer dereference in afs_get_tree() commit 0b70716081c6462be9b2928ad736d0d527b09678 upstream. afs_alloc_sbi() uses kzalloc for memory allocation. And, if ctx->dyn_root is not null, as->cell and as->volume are null. In trace_afs_get_tree() they are dereferenced. KASAN error message: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 18478 Comm: syz-executor.7 Not tainted 5.10.246-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:perf_trace_afs_get_tree+0x1d9/0x550 include/trace/events/afs.h:1365 Call Trace: trace_afs_get_tree include/trace/events/afs.h:1365 [inline] afs_get_tree+0x922/0x1350 fs/afs/super.c:599 vfs_get_tree+0x8e/0x300 fs/super.c:1572 do_new_mount fs/namespace.c:3011 [inline] path_mount+0x14a5/0x2220 fs/namespace.c:3341 do_mount fs/namespace.c:3354 [inline] __do_sys_mount fs/namespace.c:3562 [inline] __se_sys_mount fs/namespace.c:3539 [inline] __x64_sys_mount+0x283/0x300 fs/namespace.c:3539 do_syscall_64+0x33/0x50 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 80548b03991f5 ("afs: Add more tracepoints") Cc: stable@vger.kernel.org Signed-off-by: Matvey Kovalev Signed-off-by: David Howells Link: https://patch.msgid.link/20260622090856.2746629-4-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit f5096e18b6b7fbd1c2a1942e275a51bcfdfb2ad1 Author: David Howells Date: Tue Jun 9 15:09:08 2026 +0100 afs: Fix netns teardown to cancel the preallocation charger commit 47694fbc9d24ab6bf210f91e8efe06a10a478064 upstream. Fix the teardown of an afs network namespace to make sure it cancels the work item that keeps the preallocated rxrpc call/conn/peer queue charged before incoming calls are disabled (i.e. listen 0). Also, if net->live is false because the afs netns is being deleted, make afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid requeuing the charger. (This was found by AI review). Fixes: 00e907127e6f ("rxrpc: Preallocate peers, conns and calls for incoming service requests") Reported-by: Simon Horman Signed-off-by: David Howells cc: Li Daming cc: Ren Wei cc: Marc Dionne cc: Jeffrey Altman cc: linux-afs@lists.infradead.org cc: stable@kernel.org Link: https://patch.msgid.link/20260609140911.838677-5-dhowells@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ceab0ede8d904544611ffa17e57043de1d519322 Author: Matthias Feser Date: Tue May 26 07:35:09 2026 +0000 serial: 8250_omap: clear rx_running on zero-length DMA completes commit 061b627ba534230a18ec4d7251562af12325d06a upstream. On AM33xx RX DMA only triggers when the FIFO reaches the configured threshold (typically 48 bytes). For smaller bursts no DMA request is issued and the FIFO is drained by RX timeout. In this case __dma_rx_do_complete() can legitimately see count == 0. The current code exits early in this case and does not clear dma->rx_running, leaving the DMA state inconsistent. This can prevent RX DMA from restarting and may cause omap_8250_rx_dma_flush() to fail, marking DMA as broken. Fix this by clearing dma->rx_running once the DMA transfer has completed or been terminated, even if no data was transferred. Fixes: a5fd8945a478 ("serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done") Cc: stable Signed-off-by: Matthias Feser Reviewed-by: Moteen Shah Link: https://patch.msgid.link/BE3P281MB55155F2F5795E411F5A65282EE0B2@BE3P281MB5515.DEUP281.PROD.OUTLOOK.COM Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit bb4296de5b538b575978c588cb3738ab8524d01a Author: Stephan Gerhold Date: Mon Jul 6 20:03:32 2026 +0200 serial: msm: Disable DMA for kernel console UART commit 22dd2777e6c180e1c945b00f6d18550979436324 upstream. At the moment, concurrent writes from userspace and the kernel to the console can trigger a race condition that results in an infinite loop of the same messages printed over and over again. This is most likely to happen during system startup or shutdown when the init system starts/stops a large number of system services that interact with various kernel code. When userspace writes to the TTY device, the driver initiates an asynchronous DMA transfer and releases the port lock. At the same moment, the kernel printk path might grab the port lock and re-configure the UART controller for PIO, without waiting for the DMA operation to complete. It seems like this collision results in zero progress being reported for the DMA engine, so the same text is printed to the console over and over again. For the kernel console, we want a reliable output path that will be functional even during crashes etc. So rather than implementing complex code to synchronize the kernel console write routines with the userspace DMA write routines, simply disable DMA for the console UART instance. Similar checks exist in many other serial drivers, e.g. 8250_port.c, imx.c, sh-sci.c etc. Cc: stable Fixes: 3a878c430fd6 ("tty: serial: msm: Add TX DMA support") Signed-off-by: Stephan Gerhold Acked-by: Konrad Dybcio Link: https://patch.msgid.link/20260706-serial-msm-console-dma-collision-v1-1-3179b8cb1d89@linaro.org Signed-off-by: Greg Kroah-Hartman commit af6b8ceebf9dc5499d0f1baef5e4991c5a24b087 Author: Chen-Yu Tsai Date: Thu Dec 25 18:36:12 2025 +0800 dt-bindings: media: sun4i-a10-video-engine: Add interconnect properties commit 018f2dc3a42098d3b04edd1480adc51d268adb14 upstream. The Allwinner video engine sits behind the MBUS that is represented as an interconnect. Make sure that the interconnect properties are valid in the binding. Fixes: d41662e52a03 ("media: dt-bindings: media: allwinner,sun4i-a10-video-engine: Add R40 compatible") Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai Acked-by: Rob Herring (Arm) Acked-by: Jernej Skrabec Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 034fbff3fbc4a6b412d2e56e1bf9409fc1b7daa8 Author: Ricardo Ribalda Date: Mon Mar 23 09:53:53 2026 +0000 media: uvcvideo: Fix buffer sequence in frame gaps commit 2f24ac8dd87983a55f0498898f34a5f2b735b802 upstream. In UVC, the FID flips with every frame. For every FID flip, we increase the stream sequence number. Now, if a FID flips multiple times and there is no data transferred between the flips, the buffer sequence number will be set to the value of the stream sequence number after the first flip. Userspace uses the buffer sequence number to determine if there have been missing frames. With the current behaviour, userspace will think that the gap is in the wrong location. This patch modifies uvc_video_decode_start() to provide the correct buffer sequence number and timestamp. Cc: stable@kernel.org Fixes: 650b95feee35 ("[media] uvcvideo: Generate discontinuous sequence numbers when frames are lost") Signed-off-by: Ricardo Ribalda Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 6cf42040f01080bd0e5268c1e38b5752b4c18702 Author: Ricardo Ribalda Date: Fri Apr 17 05:19:29 2026 +0000 media: uvcvideo: Avoid partial metadata buffers commit a15b773fe4ffa450b56347cc506b2d1405600f5d upstream. If the metadata queue that is empty receives a new buffer while we are in the middle of processing a frame, the first metadata buffer will contain partial information. Avoid this by tracking the state of the metadata buffer and making sure that it is in sync with the data buffer. Now that we are at it, make sure that we skip buffers of size 1 or 0. They are not allowed by the spec... but it is a simple check to add and better be safe than sorry. Fixes: 088ead255245 ("media: uvcvideo: Add a metadata device node") Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda Link: https://patch.msgid.link/20260417-uvc-meta-partial-v2-2-31d274af7d2d@chromium.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 739a4b38b4a3e57496e71ae2dc10282266b9a43e Author: Eric Biggers Date: Thu Jul 16 20:42:54 2026 -0700 crypto: hisi-trng - Remove crypto_rng interface commit 216a7795ec210bdabd5dad42323eee70bbfc8d90 upstream. drivers/crypto/hisilicon/trng/trng.c exposes the same hardware through two completely separate interfaces, crypto_rng and hwrng. However, the implementation of this is buggy because it permits generation operations from these interfaces to run concurrently with each other, accessing the same registers. That is, hisi_trng_generate() synchronizes with itself but not with hisi_trng_read(). This results in potential repetition of output from the RNG, output of non-random values, etc. Fortunately, there's actually no point in hardware RNG drivers implementing the crypto_rng interface. It's not actually used by anything besides the "rng" algorithm type of AF_ALG, which in turn is not actually used in practice. Other crypto_rng hardware drivers are likewise being phased out, leaving just the hwrng support. Thus, remove it to simplify the code and avoid conflict (and confusion) with the hwrng interface which is the one that actually matters. Fixes: e4d9d10ef4be ("crypto: hisilicon/trng - add support for PRNG") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 5bf44a4a295f481a7264948069c1eb0bdbb0a417 Author: Eric Biggers Date: Thu Jul 16 19:44:03 2026 -0700 crypto: crypto4xx - Remove insecure and unused rng_alg commit 7811ec9e973d2c9e465083699f0c8240b98cb8c4 upstream. Remove crypto4xx_rng, as it is insecure and unused: - It has only a 64-bit security strength, which is highly inadequate. This can be seen by the fact that crypto4xx_hw_init() seeds it with only 64 bits of entropy, and the fact that the original commit mentions that it implements ANSI X9.17 Annex C. Another issue was that this driver didn't implement the crypto_rng API correctly, as crypto4xx_prng_generate() didn't return 0 on success. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) Fixes: d072bfa48853 ("crypto: crypto4xx - add prng crypto support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Christian Lamparter Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit d7c2e8dea9ba63dab2322f985f889a71a76f7a34 Author: Herbert Xu Date: Thu Jul 16 19:44:02 2026 -0700 crypto: crypto4xx - Remove ahash-related code commit 97855e7f1ccf4917f305baab199edb9f2595ff5b upstream. The hash implementation in crypto4xx has been disabled since 2009. As nobody has tried to fix this remove all the dead code. Signed-off-by: Herbert Xu Signed-off-by: Eric Biggers Signed-off-by: Sasha Levin commit 2eafecaba1b46bb9774eaf3556619fd5b6a17c1c Author: Eric Biggers Date: Thu Jul 16 20:52:28 2026 -0700 crypto: sun4i-ss - Remove insecure and unused rng_alg commit b2c41fa9dd8fc740c489e060b199165771f268d1 upstream. Remove sun4i_ss_rng, as it is insecure and unused: - It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing locking and has a buffer overflow. sun4i_ss_prng_generate() fails to fill the entire buffer with cryptographic random bytes, because it rounds the destination length down and also doesn't actually wait for the hardware to be ready before pulling bytes from it. - No user of this code is known. It's usable only theoretically via the "rng" algorithm type of AF_ALG. But userspace actually just uses the actual Linux RNG (/dev/random etc) instead. And rng_algs don't contribute entropy to the actual Linux RNG either. (This may have been confused with hwrng, which does contribute entropy.) The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen and discovered by Atuin - Automated Vulnerability Discovery Engine There's no point in fixing all these vulnerabilities individually when this is unused code, so let's just remove it. Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG") Cc: stable@vger.kernel.org Reported-by: Tianchu Chen Closes: https://lore.kernel.org/r/af749a8447bd7f0e9dd26ca6c87e9c6afecb09d9@linux.dev/ Acked-by: Corentin LABBE Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 15dd81da3573241cdd98abc579b89e65ef0c01b0 Author: Eric Biggers Date: Thu Jul 16 20:34:03 2026 -0700 crypto: af_alg - Remove zero-copy support from skcipher and aead commit ffdd2bc378953b525aca61902534e753f1f8e734 upstream. The zero-copy support is one of the riskiest aspects of AF_ALG. It allows userspace to request cryptographic operations directly on pagecache pages of files like the 'su' binary. It also allows userspace to concurrently modify the memory which is being operated on, a recipe for TOCTOU vulnerabilities. While zero-copy support is more valuable in other areas of the kernel like the frequently used networking and file I/O code, it has far less value in AF_ALG, which is a niche UAPI. AF_ALG primarily just exists for backwards compatibility with a small set of userspace programs such as 'iwd' that haven't yet been fixed to use userspace crypto code. Originally AF_ALG was intended to be used to access hardware crypto accelerators. However, it isn't an efficient interface for that anyway, and it turned out to be rarely used in this way in practice. Thus, the risks of the zero-copy support in AF_ALG vastly outweigh its benefits. Let's just remove it. This commit removes it from the "skcipher" and "aead" algorithm types. "hash" will be handled separately. This is a soft break, not a hard break. Even after this commit, it still works to use splice() or sendfile() to transfer data to an AF_ALG request socket from a pipe or any file, respectively. What changes is just that the kernel now makes an internal, stable copy of the data before doing the crypto operation. So performance is slightly reduced, but the UAPI isn't broken. And, very importantly, it's much safer. Tested with libkcapi/test.sh. All its test cases still pass. I also verified that this would have prevented the copy.fail exploit as well. I also used a custom test program to verify that sendfile() still works. Fixes: 8ff590903d5f ("crypto: algif_skcipher - User-space interface for skcipher operations") Fixes: 400c40cf78da ("crypto: algif - add AEAD support") Reported-by: Taeyang Lee <0wn@theori.io> Link: https://copy.fail/ Reported-by: Feng Ning Closes: https://lore.kernel.org/r/afYcc-tZFwvZZo76@ans-MacBook-Pro.local Reviewed-by: Demi Marie Obenour Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit 5740bf24cd23957297b408ca575e27fec356aced Author: Vladimir Oltean Date: Fri Apr 21 01:55:57 2023 +0300 net: dsa: tag_ksz: do not rely on skb_mac_header() in TX paths [ Upstream commit 499b2491d550677b824b828ff431e4ef4d1d3b9d ] skb_mac_header() will no longer be available in the TX path when reverting commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()"). As preparation for that, let's use skb_eth_hdr() to get to the Ethernet header's MAC DA instead, helper which assumes this header is located at skb->data (assumption which holds true here). Signed-off-by: Vladimir Oltean Reviewed-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller [ sashal: adjusted for missing tail tag PRIO (FIELD_PREP) and PTP tail tag support in 5.15 ] Signed-off-by: Sasha Levin commit c39d8159393f017095d71686bc258987cec98ac6 Author: Yichong Chen Date: Thu Jul 16 16:11:50 2026 +0800 tools/mm/slabinfo: fix total_objects attribute name [ Upstream commit 892a7864730775c3dbee2a39e9ead4fa8d4256e7 ] SLUB exports the total_objects sysfs attribute, but slabinfo tries to read objects_total. As a result, the lookup fails and the field remains zero. Use the correct attribute name and rename the corresponding structure member to match. Fixes: 205ab99dd103 ("slub: Update statistics handling for variable order slabs") Signed-off-by: Yichong Chen Cc: Reviewed-by: SeongJae Park Link: https://patch.msgid.link/96556748872BB47E+20260612071359.649946-1-chenyichong@uniontech.com Signed-off-by: Vlastimil Babka (SUSE) Signed-off-by: Sasha Levin commit 73dd3bf704ca6c20639de70c08e9a10bee904a95 Author: Muhammet Kaan KILINÇ Date: Thu Jul 16 02:58:37 2026 +0000 crypto: algif_skcipher - force synchronous processing on trees without ctx->state The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv directly into the skcipher request. After io_submit() the socket lock is dropped and the request is processed asynchronously, so a concurrent sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request run under an attacker-controlled IV. For CTR/stream modes this is IV/keystream reuse and lets an unprivileged user recover the plaintext of a concurrent operation. Snapshotting ctx->iv into per-request storage for the async path is not sufficient. For ciphers with statesize == 0 - which includes cbc and ctr - the MSG_MORE inter-chunk IV chaining is carried solely by the in-place req->iv writeback, which a snapshot redirects into per-request memory that af_alg_free_resources() releases on completion, silently producing wrong output. Writing the IV back from the completion callback instead is not possible either: that would require lock_sock() there, but the callback can run in softirq/atomic context, so it must not sleep. Make the operation synchronous instead, which removes both the IV race and any writeback race. This is equivalent to the upstream resolution, commit fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the AIO socket path across net/ entirely and so produces the same end state for this file. This patch deviates from that commit deliberately: rather than removing AIO socket support tree-wide, which would be far too invasive for stable, it removes only the AIO branch in crypto/algif_skcipher.c. io_submit() now completes synchronously; AF_ALG async is rarely used in practice. The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless, and is left alone to keep the fix minimal. Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000 after the change; MSG_MORE chunked CTR output bit-identical to single-shot. Reported-by: Muhammet Kaan KILINÇ Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management") Cc: Signed-off-by: Muhammet Kaan KILINÇ Signed-off-by: Sasha Levin commit d99f14f8b1428dfc40ac4de88110c0266364d9cf Author: Adam Li Date: Sat Oct 11 06:43:22 2025 +0000 sched/fair: Only update stats for allowed CPUs when looking for dst group [ Upstream commit 82d6e01a0699800efd8b048eb584c907ccb47b7a ] Load imbalance is observed when the workload frequently forks new threads. Due to CPU affinity, the workload can run on CPU 0-7 in the first group, and only on CPU 8-11 in the second group. CPU 12-15 are always idle. { 0 1 2 3 4 5 6 7 } {8 9 10 11 12 13 14 15} * * * * * * * * * * * * When looking for dst group for newly forked threads, in many times update_sg_wakeup_stats() reports the second group has more idle CPUs than the first group. The scheduler thinks the second group is less busy. Then it selects least busy CPUs among CPU 8-11. Therefore CPU 8-11 can be crowded with newly forked threads, at the same time CPU 0-7 can be idle. A task may not use all the CPUs in a schedule group due to CPU affinity. Only update schedule group statistics for allowed CPUs. Signed-off-by: Adam Li Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Sasha Levin commit dc11be133efca5fe3a2fb02b016dee825cc12f18 Author: Darrick J. Wong Date: Mon Jul 13 23:03:44 2026 -0700 xfs: resample the data fork mapping after cycling ILOCK commit 2f4acd0fcd862e22eab45690ec2c08c80b6ef2e7 upstream. xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle. Cc: hch@lst.de Cc: stable@vger.kernel.org # v4.11 Fixes: 3c68d44a2b49a0 ("xfs: allocate direct I/O COW blocks in iomap_begin") Signed-off-by: "Darrick J. Wong" Reviewed-by: Christoph Hellwig Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino Signed-off-by: Greg Kroah-Hartman commit 5105426424ad6981db827cc1ada835a488fab035 Author: Weiming Shi Date: Thu Jul 2 09:20:00 2026 -0700 xfs: fail recovery on a committed log item with no regions commit 2094dab19d45c487285617b7b68913d0cc0c1211 upstream. If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) Fixes: 89cebc847729 ("xfs: validate transaction header length on log recovery") Cc: stable@vger.kernel.org # v4.3 Reported-by: Xiang Mei Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Weiming Shi Reviewed-by: Christoph Hellwig Reviewed-by: "Darrick J. Wong" Signed-off-by: Carlos Maiolino Signed-off-by: Greg Kroah-Hartman commit 5630da218a45ba80f0aba0846cbe8aa655da122b Author: Joanne Koong Date: Mon May 18 22:28:07 2026 -0700 fuse: re-lock request before returning from fuse_ref_folio() commit b5befa80fdbe287a98480effed9564712924add5 upstream. fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning. Fixes: c3021629a0d8 ("fuse: support splice() reading from fuse device") Cc: stable@vger.kernel.org Signed-off-by: Joanne Koong Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 633e1af8a6fc11fa4049c9147caf53b5741c7076 Author: Alberto Ruiz Date: Wed Apr 8 17:23:40 2026 +0200 fuse: fix device node leak in cuse_process_init_reply() commit 9fa4f7a53406430ee9982f2f636a15b338185122 upstream. If device_add() succeeds during CUSE initialization but a subsequent step (cdev_alloc() or cdev_add()) fails, the error path calls put_device() without first calling device_del(). This leaks the devtmpfs entry created by device_add(), leaving a stale /dev/ node that persists until reboot. Since the cuse_conn is never linked into cuse_conntbl on the failure path, cuse_channel_release() sees cc->dev == NULL and skips device_unregister(), so no other code path cleans up the node. This has several consequences: - The device name is permanently poisoned: any subsequent attempt to create a CUSE device with the same name hits the stale sysfs entry, device_add() fails, and the new device is aborted. - The collision manifests as ENODEV returned to userspace with no dmesg diagnostic, making it very difficult to debug. - The failure is self-perpetuating: once a name is leaked, all future attempts with that name fail identically. Fix this by introducing an err_dev label that calls device_del() to undo device_add() before falling through to err_unlock. The existing err_unlock path from a device_add() failure correctly skips device_del() since the device was never added. Testing instructions can be found at the lore link below. Link: https://lore.kernel.org/all/20260408-wip-cuse-leak-fix-v1-0-1c028d575e97@redhat.com/ Signed-off-by: Alberto Ruiz Fixes: 151060ac1314 ("CUSE: implement CUSE - Character device in Userspace") Cc: stable@vger.kernel.org Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 595e6537ad1a210da32cbb9a7f91aa73090915ba Author: Michael Bommarito Date: Tue Jun 2 15:47:00 2026 -0400 RDMA/siw: bound Read Response placement to the RREAD length commit 7d29f7e9dbd844cae4d3e559cf78324b9642fd6b upstream. In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Link: https://patch.msgid.link/r/20260602194700.2273758-1-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 68c09762172f6224e9ddf9b0a60bacbb36e443eb Author: Zhenhao Wan Date: Fri Jun 12 01:15:54 2026 +0800 RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg commit 963af8d97a8c6a117134a8d0db1415e0489200b1 upstream. When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE). Fixes: 9cb837480424 ("RDMA/rtrs: server: main functionality") Link: https://patch.msgid.link/r/20260612-master-v1-1-70cde5c6fdc9@gmail.com Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Zhenhao Wan Reviewed-by: Md Haris Iqbal Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit e57e18eb1feca0557a92bd4dc94ef7367c3beef4 Author: Dmitry Torokhov Date: Mon Jun 29 22:49:15 2026 -0700 Input: maplecontrol - set driver data before registering input device commit fe938ee497d58c644f6910cfe6ae155f6fb3e523 upstream. Set maple driver data before calling input_register_device() to ensure that it is available if the device is opened immediately and the callback is triggered. Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Tested-by: Florian Fuchs Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 5f557543b9f6be649712320491aee5bc7de30bb4 Author: Dmitry Torokhov Date: Mon Jun 29 22:47:34 2026 -0700 Input: maplemouse - set driver data before registering input device commit 738f24bbbc95dd50cb4229d1ed62a05f29db2bda upstream. Set maple driver data before calling input_register_device() to ensure that it is available if the device is opened immediately and the callback is triggered. Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Tested-by: Florian Fuchs Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 72cee5620fa28e2f8e6e8062b1fdd6e4dbf56802 Author: Dmitry Torokhov Date: Mon Jun 29 18:44:41 2026 -0700 Input: maple_keyb - set driver data before registering input device commit 536394ec81419b67d9f4f0028812c4372397be1b upstream. Set maple driver data before calling input_register_device() to ensure that it is available if the device is opened immediately and the callback is triggered. Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 595237884a04bf3422466b95b5e8a60935a2f1a5 Author: Dmitry Torokhov Date: Fri Jul 3 23:01:12 2026 -0700 Input: mms114 - fix multi-touch slot corruption commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream. If the touchscreen controller reports a touch ID of 0, the driver calculates the slot ID as touch->id - 1, which underflows to UINT_MAX. This is passed to input_mt_slot() as -1. Since the input core ignores negative slot values, the active slot remains unchanged. The driver then reports the touch coordinates for the previously active slot, corrupting its state. Fix this by rejecting touch reports with ID 0. Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver") Cc: stable@vger.kernel.org Reported-by: sashiko-bot@kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 00ef8634f4b46c589e574db8442f72490131fd4e Author: Florian Fuchs Date: Mon Jun 29 18:33:42 2026 -0700 Input: maplemouse - fix NULL pointer dereference in open() commit ee89db004238bd0b034f2a6176e175561658750b upstream. Commit 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata") dropped the input_set_drvdata() call in probe because the data appeared to be unused. However, dc_mouse_open() and dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&dev->dev)). This appears to be accessing the data attached to an instance of maple_device structure, while in reality this actually retrieves driver data from the input device's embedded struct device (doing invalid conversion of input device structure to maple device). After input_set_drvdata() was removed, that lookup started returning NULL and opening the input device dereferences mse->mdev. Restore input_set_drvdata() and convert open() and close() to use input_get_drvdata() so the dependency is no longer hidden. Fixes: 6b3480855aad ("maple: input: fix up maple mouse driver") Fixes: 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata") Signed-off-by: Florian Fuchs Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 044167cba2384bcd783547ad5e30ecd292b30919 Author: Bryam Vargas Date: Sat Jun 13 20:07:20 2026 -0500 Input: touchwin - reset the packet index on every complete packet commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream. tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do. Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit d10b0507fa0f5b46764b178e3271f9012f2df677 Author: Bryam Vargas Date: Mon Jun 22 20:47:50 2026 -0700 Input: iforce - bound the device-reported force-feedback effect index commit 0e9943d2e4c63496b6ca84bc66fd3c71d40558e2 upstream. iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Bryam Vargas Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260613-b4-disp-4828d263-v1-1-02320e1a89dd@proton.me Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 4bfea9c3a0981c1c7fc5d1a1b27197b2de247902 Author: Bryam Vargas Date: Fri Jun 12 21:10:33 2026 -0500 Input: goodix - clamp the device-reported contact count commit 5ed62a96e06be4e94b8296b7932afee550a70e04 upstream. goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. Fixes: a7ac7c95d468 ("Input: goodix - use max touch number from device config") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Reviewed-by: Hans de Goede Link: https://patch.msgid.link/20260612-b4-disp-6844625d-v1-1-df0aed080c9d@proton.me Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit f6d10af2036d1d4a847a74fe47ebbf93bce3c84c Author: Ranjan Kumar Date: Mon Jun 22 22:31:05 2026 -0700 Input: elan_i2c - prevent division by zero and arithmetic underflow commit df2b818fa009c10ff6ba875a1663ff001cda9558 upstream. The Elan I2C touchpad driver queries the device for its physical dimensions and trace counts to calculate the device resolution and width. However, if the device firmware or device tree provides invalid zero values for x_traces or y_traces, it results in a fatal division-by-zero exception leading to a kernel panic during device probe. Add checks to ensure these parameters are non-zero before performing the division. If invalid trace values are detected, fall back to a safe default of 1. Additionally, prevent an arithmetic underflow in the touch reporting logic. Previously, if the calculated or fallback width was smaller than ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a massive unsigned integer being reported to userspace. Clamp the adjusted width to a minimum of 0 to safely handle small physical dimensions and fallback scenarios. Completing the probe with safe fallback values ensures the sysfs nodes are created, keeping the firmware update path intact so a recovery firmware can be flashed to the device. Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad") Fixes: e3a9a1290688 ("Input: elan_i2c - do not query the info if they are provided") Signed-off-by: Ranjan Kumar Link: https://patch.msgid.link/20260612060339.3829666-1-kumarranja@chromium.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit d162a1ead7de404d8b41a093c83ed0db6487cded Author: Bryam Vargas Date: Sun Jun 14 00:36:12 2026 -0500 Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count commit d577e46785d45484b2ab7e7309c49b18764bf56c upstream. rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries. Fixes: 3e64fcbdbd10 ("Input: synaptics-rmi4 - limit the range of what GPIOs are buttons") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-2-cf39a3615085@proton.me Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 3480e24bc4e178aaa009edb25b6ee12df199e210 Author: Bryam Vargas Date: Sun Jun 14 00:36:11 2026 -0500 Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count commit 57c10915f2c16c90e0d46ad00876bf39ece40fc2 upstream. rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting. Fixes: 9e4c596bfd00 ("Input: synaptics-rmi4 - add support for F3A") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-1-cf39a3615085@proton.me Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 768baab047a0e8b192ab483950abbc2889bfe642 Author: Haoxiang Li Date: Wed Jun 10 16:41:16 2026 -0700 Input: synaptics-rmi4 - unregister function handlers on physical driver registration failure commit 6251f7d3472c0409e30f8d6a24f10d33d12e3f9a upstream. If rmi_register_physical_driver() fails, the current error path unregisters only the RMI bus. The function handlers registered earlier remain registered with the driver core. Add a separate error path to unregister the function handlers before unregistering the bus in this failure case. Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices") Signed-off-by: Haoxiang Li Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260610064633.2837084-1-haoxiang_li2024@163.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 424d70a865e36393207e1d4cfcada2765c8f6799 Author: Guillermo Rodríguez Date: Thu Jun 11 12:48:56 2026 +0200 i2c: stm32f7: truncate clock period instead of rounding it commit 111bb7f9f4a90b32e495d70a607c67b137f3074a upstream. stm32f7_i2c_compute_timing() derives the I2C clock source period (i2cclk) with DIV_ROUND_CLOSEST, which may round it up. When the period is overestimated, all timings computed from it (SCLDEL, SDADEL, SCLL, SCLH) come out shorter on the wire than calculated, and the resulting bus rate can exceed the requested speed, violating the I2C specification minimums for tLOW and tHIGH. For example, with a 104.45 MHz clock source (e.g. PCLK1, the reset-default I2C clock source on STM32MP1), i2cclk is rounded from 9.574 ns up to 10 ns. Requesting a 400 kHz fast mode bus with 72/27 ns rise/fall times and no analog/digital filters then produces an actual bus rate of 415.6 kHz with tLOW = 1254 ns, violating both the 400 kHz maximum rate and the 1300 ns tLOW minimum of the specification. Truncate the period instead, so that it can only be underestimated. The error then falls on the safe side: the programmed timings come out slightly longer than computed and the bus runs marginally below the target rate (375.3 kHz in the example above) while meeting the specification. i2cbus is left rounded-to-closest: it is only used as the target of the clk_error comparison and is never multiplied into the programmed timings, so nearest rounding remains accurate there. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Guillermo Rodríguez Cc: # v4.14+ Acked-by: Alain Volmat Reviewed-by: Pierre-Yves MORDRET Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260611104857.242153-1-guille.rodriguez@gmail.com Signed-off-by: Greg Kroah-Hartman commit d39282f552dd6c35b9b84b4af78f1198c24f3373 Author: Johan Hovold Date: Mon May 11 16:37:13 2026 +0200 i2c: core: fix adapter deregistration race commit b1a58ed9eab146b36f41a55db8f5d7ce9fdedf3f upstream. Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name). Fixes: 35fc37f81881 ("i2c: Limit core locking to the necessary sections") Cc: stable@vger.kernel.org # 2.6.31 Cc: Jean Delvare Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit f6fa713ada59b3545764e77d27134befa24ad982 Author: Mikhail Gavrilov Date: Sun Mar 15 04:27:22 2026 +0500 udmabuf: fix DMA direction mismatch in release_udmabuf() commit fb7b1a0ab25a6077d26cb3829e31743972d4f31d upstream. begin_cpu_udmabuf() maps the sg_table with the caller-provided direction (e.g., DMA_TO_DEVICE for a write-only sync), and caches it in ubuf->sg for reuse. However, release_udmabuf() always unmaps this sg_table with a hardcoded DMA_BIDIRECTIONAL, regardless of the direction that was originally used for the mapping. With CONFIG_DMA_API_DEBUG=y this produces: DMA-API: misc udmabuf: device driver frees DMA memory with different direction [device address=0x000000044a123000] [size=4096 bytes] [mapped with DMA_TO_DEVICE] [unmapped with DMA_BIDIRECTIONAL] The issue was found during video playback when GStreamer performed a write-only DMA_BUF_IOCTL_SYNC on a udmabuf. It can be reproduced with CONFIG_DMA_API_DEBUG=y by creating a udmabuf from a memfd, performing a write-only sync (DMA_BUF_SYNC_WRITE without DMA_BUF_SYNC_READ), and closing the file descriptor. Fix this by storing the DMA direction used when the sg_table is first created in begin_cpu_udmabuf(), and passing that same direction to put_sg_table() in release_udmabuf(). Fixes: 284562e1f348 ("udmabuf: implement begin_cpu_access/end_cpu_access hooks") Cc: stable@vger.kernel.org Signed-off-by: Mikhail Gavrilov Reviewed-by: Vivek Kasireddy Signed-off-by: Vivek Kasireddy Link: https://patch.msgid.link/20260314232722.15555-1-mikhail.v.gavrilov@gmail.com Signed-off-by: Greg Kroah-Hartman commit 9a21f1defd96c6301c5fb462a78eb51b191bd2dd Author: Sean Christopherson Date: Thu Jun 18 10:43:46 2026 -0700 KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode commit 7ef78d71ca713d8c00f7c34ddcf276c808143f77 upstream. When updating CR8 intercepts, get vmcs12 if and only if the vCPU is in guest mode so that a future change can have update CR8 intercepts during vCPU creation, without running afoul of get_vmcs12()'s lockdep assertion. ------------[ cut here ]------------ debug_locks && !(lock_is_held(&(&vcpu->mutex)->dep_map) || !refcount_read(&vcpu->kvm->users_count)) WARNING: arch/x86/kvm/vmx/nested.h:61 at get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline], CPU#0: syz.2.19/5879 WARNING: arch/x86/kvm/vmx/nested.h:61 at vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879, CPU#0: syz.2.19/5879 Modules linked in: CPU: 0 UID: 0 PID: 5879 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:get_vmcs12 arch/x86/kvm/vmx/nested.h:60 [inline] RIP: 0010:vmx_update_cr8_intercept+0x3de/0x4e0 arch/x86/kvm/vmx/vmx.c:6879 Call Trace: apic_update_ppr arch/x86/kvm/lapic.c:984 [inline] kvm_lapic_reset+0x1c24/0x2980 arch/x86/kvm/lapic.c:3023 kvm_vcpu_reset+0x44c/0x1bf0 arch/x86/kvm/x86.c:12986 kvm_arch_vcpu_create+0x746/0x8b0 arch/x86/kvm/x86.c:12847 kvm_vm_ioctl_create_vcpu+0x428/0x930 virt/kvm/kvm_main.c:4201 kvm_vm_ioctl+0x893/0xd50 virt/kvm/kvm_main.c:5159 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f No functional change intended. Reported-by: syzbot ci Closes: https://lore.kernel.org/all/6a2adf3b.3b0a2d4e.8c8d1.0012.GAE@google.com Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-ID: <20260618174347.1981064-2-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit a5bc7d55d3a1a2a9ec5d7c8cbbc0853d6ff57c3e Author: Koichiro Den Date: Wed Mar 4 17:30:27 2026 +0900 NTB: epf: Fix request_irq() unwind in ntb_epf_init_isr() commit fcba26efe5efc7441f5505f4ccc69791214b40be upstream. ntb_epf_init_isr() requests multiple MSI/MSI-X vectors in a loop. If request_irq() fails part-way through, it jumps straight to pci_free_irq_vectors() without freeing already requested IRQs. Fix the error path by freeing any successfully requested IRQs before releasing the vectors. Fixes: 812ce2f8d14e ("NTB: Add support for EPF PCI Non-Transparent Bridge") Signed-off-by: Koichiro Den Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Dave Jiang Cc: stable@vger.kernel.org # v5.12+ Link: https://patch.msgid.link/20260304083028.1391068-2-den@valinux.co.jp Signed-off-by: Greg Kroah-Hartman commit fae76a94b35ee8c0e2eb6f64caca01d75c6d34e4 Author: Bryam Vargas Date: Fri Jun 12 14:29:06 2026 -0500 exfat: bound uniname advance in exfat_find_dir_entry() commit 3a1230e7b043c62737b05a3e9275ca83a43ad20a upstream. In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer. Fixes: ca06197382bd ("exfat: add directory operations") Cc: stable@vger.kernel.org Suggested-by: Namjae Jeon Signed-off-by: Bryam Vargas Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit cb148a2762d644bff1894728e8835a9a4b84f9ea Author: Benjamin Coddington Date: Thu Jun 11 17:02:15 2026 -0400 NFSv4: include MAY_WRITE in open permission mask for O_TRUNC commit 5140f099ecd8a2f2808b7f7b720ee1bad8468974 upstream. POSIX requires write permission to truncate a file, so an open() that specifies O_TRUNC must be authorized for write access regardless of the O_ACCMODE access mode. nfs_open_permission_mask() builds the access mask passed to nfs_may_open(), which is the local authorization gate for OPENs the client serves itself from a cached write delegation via the can_open_delegated() path in nfs4_try_open_cached(). The mask is derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a file the caller cannot write requests only MAY_READ and passes the local check. The OPEN is then satisfied locally and the truncation is issued to the server as a SETATTR(size=0) over the delegation stateid, which the server accepts under standard write-delegation semantics. POSIX requires that this open fail with EACCES. Include MAY_WRITE in the mask whenever O_TRUNC is set so the local check matches the access the server would have enforced. Suggested-by: Trond Myklebust Fixes: af22f94ae02a ("NFSv4: Simplify _nfs4_do_access()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit ee5b8888d3248618251fb69a2fad92afcb81557e Author: Huihui Huang Date: Wed Jul 1 18:28:46 2026 +0800 tracing: Prevent out-of-bounds read in glob matching commit 0a6070839b1ef276d5b05bedfb787743e140fb17 upstream. String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour. Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Huihui Huang Signed-off-by: Ren Wei Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit cce2063404b2341e7b2bbf85eddfcd70a31a0033 Author: Carlos Song Date: Mon May 25 14:23:57 2026 +0800 spi: fsl-lpspi: terminate the RX channel on TX prepare failure path commit 01980b5da56e573d62798d0ff6c86bcaa2b22cbe upstream. When dmaengine_prep_slave_sg() fails for the TX channel, the error path terminates the TX DMA channel but leaves the RX channel running. Since the RX channel was already submitted and issued prior to preparing the TX descriptor, returning -EINVAL causes the SPI core to unmap the DMA buffers while the RX DMA engine continues writing to them, leading to potential memory corruption or use-after-free. Terminate the RX channel before returning on the TX prepare failure path. Fixes: 09c04466ce7e ("spi: lpspi: add dma mode support") Cc: stable@vger.kernel.org Signed-off-by: Carlos Song Link: https://patch.msgid.link/20260525062357.3191349-3-carlos.song@oss.nxp.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 2f93c743afdb279ba8be1534ba898eac007ad977 Author: Carlos Song Date: Mon May 25 14:23:56 2026 +0800 spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync() commit e703ce47691b967fe9b4057fb1d062273211afa9 upstream. dmaengine_terminate_all() has been deprecated, so replace it with dmaengine_terminate_sync(). Fixes: 09c04466ce7e ("spi: lpspi: add dma mode support") Cc: stable@vger.kernel.org Signed-off-by: Carlos Song Link: https://patch.msgid.link/20260525062357.3191349-2-carlos.song@oss.nxp.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 27a9073192f724a4cc192ce09d717c3ccabdad71 Author: Paul Louvel Date: Thu May 7 16:41:47 2026 +0200 crypto: talitos - use dma_sync_single_for_cpu() before reading descriptor header commit e17ff3d6ff907dc8406261e8fd3e1fc8a908f0f6 upstream. In order to know if a descriptor has been processed by the device, the driver polls the FIFO to see if DESC_HDR_DONE is set on a descriptor header to confirm completion. The current code does not make sure that the CPU gets up to date data before reading the descriptor. Fix this by calling dma_sync_single_for_cpu() before reading memory written by the device. Cc: stable@vger.kernel.org Fixes: 58cdbc6d2263 ("crypto: talitos - fix hash on SEC1.") Signed-off-by: Paul Louvel Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 5f527f3f1cd5a0867f419f55cb22423c59898d72 Author: Eric Biggers Date: Sun Apr 19 23:33:49 2026 -0700 crypto: drbg - Fix the fips_enabled priority boost commit a8a1f93080efc83a9ff8452954429ae379e9e614 upstream. When fips_enabled=1, it seems to have been intended for one of the algorithms defined in crypto/drbg.c to be the highest priority "stdrng" algorithm, so that it is what is used by "stdrng" users. However, the code only boosts the priority to 400, which is less than the priority 500 used in drivers/crypto/caam/caamprng.c. Thus, the CAAM RNG could be used instead. Fix this by boosting the priority by 2000 instead of 200. Fixes: 541af946fe13 ("crypto: drbg - SP800-90A Deterministic Random Bit Generator") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit c9b982c8b24f093a570b1ce8ab5b8fd75d3243a5 Author: Eric Biggers Date: Sun Apr 19 23:33:48 2026 -0700 crypto: drbg - Fix drbg_max_addtl() on 64-bit kernels commit 6f49f00c981bbb9ef602966f19bfdbef46b681d2 upstream. On 64-bit kernels, drbg_max_addtl() returns 2**35 bytes. That's too large, for two reasons: 1. SP800-90A says the maximum limit is 2**35 *bits*, not 2**35 bytes. So the implemented limit has confused bits and bytes. 2. When drbg_kcapi_hash() calls crypto_shash_update() on the additional information string, the length is implicitly cast to 'unsigned int'. That truncates the additional information string to U32_MAX bytes. Fix the maximum additional information string length to always be U32_MAX - 1, causing an error to be returned for any longer lengths. Fixes: 541af946fe13 ("crypto: drbg - SP800-90A Deterministic Random Bit Generator") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 7b03312491f9fe6ba4d60c4023e7e61d2d1fed96 Author: Eric Biggers Date: Sun Apr 19 23:33:45 2026 -0700 crypto: drbg - Fix returning success on failure in CTR_DRBG commit 39a31ad9e2a5ed7e9c9c6f711dca96c8c8f5f26b upstream. drbg_ctr_generate() sometimes returns success when it fails, leaving the output buffer uninitialized. Fix it. Fixes: cde001e4c3c3 ("crypto: rng - RNGs must return 0 in success case") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 3920c5f6edc341729d20d0507e466c6d3b11f372 Author: Ruijie Li Date: Mon May 25 19:45:21 2026 +0800 crypto: pcrypt - restore callback for non-parallel fallback commit ed459fe319376e876de433d12b6c6772e612ca36 upstream. pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged. Fixes: 662f2f13e66d ("crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:gpt-5.4 Signed-off-by: Ruijie Li Signed-off-by: Ren Wei Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit b709e0e768766abe29a49e1c1922a1604be602f4 Author: Anastasia Tishchenko Date: Wed May 13 13:57:40 2026 +0300 crypto: ecc - Fix carry overflow in vli multiplication commit 27b536a2ec8e2f85a0380c2d13c9ecbc7aaab406 upstream. The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition. Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Signed-off-by: Anastasia Tishchenko Cc: stable@vger.kernel.org # v4.8+ Reviewed-by: Lukas Wunner Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit bcf3cf74dfb6981e18b22cbf561f859a0f7faa26 Author: Thorsten Blum Date: Mon Apr 27 18:39:39 2026 +0200 crypto: caam - use print_hex_dump_devel to guard key hex dumps again commit 8005dc808bcce7d6cc2ae015a3cde1683bee602d upstream. Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. Fixes: 8d818c105501 ("crypto: caam/qi2 - add DPAA2-CAAM driver") Fixes: 226853ac3ebe ("crypto: caam/qi2 - add skcipher algorithms") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 8b56ba10105ca34a4b75f7e33d41d96a63815591 Author: Thorsten Blum Date: Mon Apr 27 18:39:37 2026 +0200 crypto: caam - use print_hex_dump_devel to guard key hex dumps commit 3f57657b6ea23f933371f2c2846322f441773cee upstream. Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() and gen_split_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. Fixes: 6e005503199b ("crypto: caam - print debug messages at debug level") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 36fe7d25dbc40da0c6b1dd4513a4f69ac6164eee Author: Bryam Vargas Date: Sun Jun 7 01:18:27 2026 +0000 isofs: bound Rock Ridge symlink components to the SL record commit 5fa1d6a5ec2356d2107dead614437c66fa7138b1 upstream. get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Suggested-by: Michael Bommarito Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260607011823.217748-1-hexlabsecurity@proton.me Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 5eacdb1967378f5e5591cd27a2d8cdee2df1a599 Author: Bryam Vargas Date: Sun Jun 7 06:41:43 2026 +0000 partitions: aix: bound the pp_count scan to the ppe array commit 2dc0bfd2fe355fb930de63c2f2eb8ced8570c579 upstream. aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold. Fixes: 6ceea22bbbc8 ("partitions: add aix lvm partition support files") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Acked-by: Philippe De Muyter Link: https://patch.msgid.link/20260607064137.302574-1-hexlabsecurity@proton.me Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit f221e79018e4bd780df58caa0d684750c00bead4 Author: Achkinazi, Igor Date: Thu May 28 15:24:27 2026 +0000 nvme-multipath: set BIO_REMAPPED on bios remapped to per-path namespace disks commit 88bac2c1a72b8f4f71e9845699aa872df04e5850 upstream. When nvme_ns_head_submit_bio() remaps a bio from the multipath head to a per-path namespace, bio_set_dev() clears BIO_REMAPPED. The remapped bio is then resubmitted through submit_bio_noacct() which calls bio_check_eod() because BIO_REMAPPED is not set. This races with nvme_ns_remove() which zeroes the per-path capacity before synchronize_srcu(): CPU 0 (IO submission) --------------------- srcu_read_lock() nvme_find_path() -> ns [NVME_NS_READY is set] CPU 1 (namespace removal) ------------------------- clear_bit(NVME_NS_READY) set_capacity(ns->disk, 0) synchronize_srcu() <- blocks CPU 0 (IO submission) --------------------- bio_set_dev(bio, ns->disk->part0) [clears BIO_REMAPPED] submit_bio_noacct(bio) -> bio_check_eod() sees capacity=0 -> bio fails with IO error The SRCU read lock prevents synchronize_srcu() from completing, but does not prevent set_capacity(0) from executing. The bio fails the EOD check before it reaches the NVMe driver, so nvme_failover_req() never gets a chance to redirect it to another path of multipath. IO errors are reported to the application despite another path being available. On older kernels (before commit 0b64682e78f7 "block: skip unnecessary checks for split bio"), the same race was also reachable through split remainders resubmitted via submit_bio_noacct(). Fix this by setting BIO_REMAPPED after bio_set_dev() in nvme_ns_head_submit_bio(). This skips bio_check_eod() on the per-path device; the EOD check already passed on the multipath head. NVMe per-path namespace devices are always whole disks (bd_partno=0), so the blk_partition_remap() skip also gated by BIO_REMAPPED is a no-op. The flag does not persist across failover and cannot go stale if the namespace geometry changes between attempts: nvme_failover_req() calls bio_set_dev() to redirect the bio back to the multipath head, which clears BIO_REMAPPED. When nvme_requeue_work() resubmits through submit_bio_noacct(), bio_check_eod() runs normally against the current capacity. Same approach as commit 3a905c37c351 ("block: skip bio_check_eod for partition-remapped bios"). Fixes: a7c7f7b2b641 ("nvme: use bio_set_dev to assign ->bi_bdev") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Igor Achkinazi Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit 105f80064cfc15d7ca98ce6d153ca1f5af94c262 Author: Mikulas Patocka Date: Mon May 11 13:04:16 2026 +0200 dm-ioctl: report an error if a device has no table commit 457e32348d606a77f9b20e25e989734189834c07 upstream. When we send a message to a device that has no table, the return code was not set. The code would return "2", which is not considered a valid return value. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Reviewed-by: Benjamin Marzinski Signed-off-by: Greg Kroah-Hartman commit 0a9b79a951cfd70a9d31ca01ae2d08a20bb730e9 Author: Bryam Vargas Date: Fri Jun 12 01:40:01 2026 -0500 udf: validate sparing table length as an entry count, not a byte count commit 3ec997bd5508e9b25210b5bbec89031629cdb093 upstream. udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size(). Fixes: 1df2ae31c724 ("udf: Fortify loading of sparing table") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260612-b4-disp-91780c4e-v1-1-f15112ff6882@proton.me Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 883962731420ec271ed8c1cd76524f4b17faa982 Author: Bryam Vargas Date: Fri Jun 12 02:53:31 2026 -0500 udf: validate VAT header length against the VAT inode size commit d8202786b3d75125c84ebc4de6d946f92fde0ee8 upstream. udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode. Fixes: fa5e08156335 ("udf: Handle VAT packed inside inode properly") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Link: https://patch.msgid.link/20260612-b4-disp-9a2317ee-v1-1-fefef5736154@proton.me Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit b54aee5652fcd7c23a0904a4623ec462c3edc70c Author: Michael Bommarito Date: Fri May 15 10:23:27 2026 -0400 udf: validate free block extents against the partition length commit 5f0419457f89dce1a3f1c8e62a3adf2f39ab8168 upstream. udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array. Fixes: 56e69e59751d ("udf: prevent integer overflow in udf_bitmap_free_blocks()") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260515142327.1120767-1-michael.bommarito@gmail.com Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 093a68d6387b32cba29d44cb884b75cf63530962 Author: Liviu Stan Date: Mon Jul 13 18:26:10 2026 +0300 iio: temperature: ltc2983: Fix n_wires default bypassing rotation check [ Upstream commit 434c150752675f44dc52c384a7fa22e5176bc35a ] When adi,number-of-wires is absent, n_wires is left at 0. The binding documents a default of 2 wires, matching the hardware default. However the current-rotate validation checks n_wires == 2 || n_wires == 3, so with n_wires = 0 the guard is bypassed and adi,current-rotate is accepted for a 2-wire RTD. Initialize n_wires = 2 to match the binding default and ensure the rotation check fires correctly when the property is absent. Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Liviu Stan Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Liviu Stan Signed-off-by: Sasha Levin commit 87320b262e8773f1bc8b08fe8aac16c08440a615 Author: Madhu M Date: Fri Jun 19 21:03:11 2026 +0530 usb: typec: ucsi: Pass full DP config payload in SET_NEW_CAM for DP alt mode commit 735a461d060d4eeb2f9732aba1295bc32a3982e2 upstream. In the UCSI Specification Revision 3.1 RC1, bits 32-63 of the SET_NEW_CAM command hold the 32-bit Alternate Mode Specific (AMSpecific) field. For DisplayPort Alternate Mode, this field must contain the full 32-bit DisplayPort configuration VDO payload that the OPM wants the connector to operate in, rather than just the pin assignment value. This AMSpecific value follows the DisplayPort Configurations defined in the DisplayPort Alt Mode on USB Type-C Specification v2.1a, Table 5-13: SOP DisplayPort Configurations. Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Cc: stable Signed-off-by: Madhu M Reviewed-by: Jameson Thies Reviewed-by: Andrei Kuchynski Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260619153311.3526083-1-madhu.m@intel.com Signed-off-by: Greg Kroah-Hartman commit cf1ace04e73090953b1ed7a22fb374d7ddacdbd5 Author: Andrei Kuchynski Date: Mon Jun 1 14:28:37 2026 +0000 usb: typec: ucsi: Invert DisplayPort role assignment commit d092d7edf8faefa3e27b9fc7f0e7904b06c833a2 upstream. The existing implementation assigned these flags backwards, configuring the partner's DisplayPort role to match the port's role instead of complementing it. This prevents proper configuration during DP altmode activation, often causing `pin_assignment` to remain 0 in `dp_altmode_configure()` and resulting in VDM negotiation failures: [ 583.328246] typec port1.1: VDM 0xff01a150 failed Additionally, the fix ensures that the `pin_assignment` sysfs attribute displays the correct values. Cc: stable Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Signed-off-by: Andrei Kuchynski Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260601142837.3240207-1-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman commit d638ec188e95fe60f4b01106ffd41958f8fb3c2c Author: Badhri Jagan Sridharan Date: Mon Jun 22 22:08:03 2026 +0000 usb: typec: tcpm: Validate SVID index in svdm_consume_modes() commit 7b681dd5fbf60b24a13c14661e5b7735759fb491 upstream. In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes(). Assisted-by: Antigravity:gemini-3.5-flash Fixes: 4ab8c18d4d67 ("usb: typec: Register a device for every mode") Cc: stable Signed-off-by: Badhri Jagan Sridharan Reviewed-by: RD Babiera Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260622220803.305750-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman commit 1226293ec9bed3d4cc5b05eeeb811d315ca51652 Author: Sam Day Date: Fri Jun 26 14:29:10 2026 +1000 usbip: vudc: fix NULL deref in vep_dequeue() commit c5371e0b91b24159a3ebaa61e70b0980bcf03c0a upstream. vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. Seems that nobody has really stressed the FunctionFS AIO path on usbip's vudc. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158 Assisted-by: opencode:openai/gpt-5.5 Cc: stable Fixes: b6a0ca111867 ("usbip: vudc: Add UDC specific ops") Reviewed-by: Igor Kotrasinski Signed-off-by: Sam Day Link: https://patch.msgid.link/20260626-usbip-vudc-deque-fix-v3-1-98c2dc4d6a48@samcday.com Signed-off-by: Greg Kroah-Hartman commit d708f17213133aeb22f98f883408728d2f0f5a20 Author: Yichong Chen Date: Wed Jun 17 10:06:13 2026 +0800 usbip: tools: support SuperSpeedPlus devices commit 195e667c8719480c320cd48ac0fbf1cb81d6ffe0 upstream. USB devices running at SuperSpeedPlus report "10000" or "20000" in their sysfs speed attribute. usbip currently maps only "5000" to USB_SPEED_SUPER, so a SuperSpeedPlus device is imported as USB_SPEED_UNKNOWN. The attach request is then rejected by vhci_hcd: vhci_hcd: Failed attach request for unsupported USB speed: UNKNOWN Map the SuperSpeedPlus sysfs speed values to USB_SPEED_SUPER_PLUS, use the SuperSpeed VHCI hub for SuperSpeedPlus devices, and recognize the gadget current_speed string used by the kernel. Fixes: b2316645ca5e ("usb: show speed "10000" in sysfs for USB 3.1 SuperSpeedPlus devices") Cc: stable Signed-off-by: Yichong Chen Reviewed-by: Shuah Khan Link: https://patch.msgid.link/00C828F338E43447+20260617020613.199086-1-chenyichong@uniontech.com Signed-off-by: Greg Kroah-Hartman commit 5bca9462df2be055f1e0fad420b1cb9e4c2656ba Author: Xu Rao Date: Fri Jun 26 15:06:07 2026 +0800 USB: usb-storage: ene_ub6250: restore media-ready check commit 5fc3f333c001f1e308bbcdeecdec0d054d24338b upstream. Commit 1892bf90677a ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c") converted the media status fields from bitfields to bit masks. The original ene_transport() test called ene_init() only when neither media type was ready: !(sd_ready || ms_ready) The converted test became: !sd_ready || ms_ready This is not equivalent. Restore the original semantics by testing that both ready bits are clear before calling ene_init(). Fixes: 1892bf90677a ("USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c") Cc: stable Signed-off-by: Xu Rao Reviewed-by: Alan Stern Link: https://patch.msgid.link/F42641386E32404F+20260626070607.4119527-1-raoxu@uniontech.com Signed-off-by: Greg Kroah-Hartman commit 691e61e5d4cfc5a1b061e937f8cbf2126bfc19a0 Author: Johan Hovold Date: Mon Jun 8 16:58:03 2026 +0200 USB: ulpi: fix memory leak on registration failure commit 8af6812795869a66e9b26044f455b13deecdb69c upstream. The allocated device name is never freed on early ULPI device registration failures. Fix this by initialising the device structure earlier and releasing the initial reference whenever registration fails. Fixes: 289fcff4bcdb ("usb: add bus type for USB ULPI") Cc: stable Cc: Heikki Krogerus Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260608145803.69360-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 2f296974acc279f05f284441bfe3064074958d11 Author: Johan Hovold Date: Tue Jun 23 17:12:29 2026 +0200 USB: serial: digi_acceleport: fix write buffer corruption commit 24ca1fea8f2753bf33e1d458ec1ae5d9b7796a65 upstream. The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver. Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=11 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 6a8592ace932081ea11aea41c460a1ca0f6344a4 Author: Johan Hovold Date: Tue Jun 23 17:11:10 2026 +0200 USB: serial: digi_acceleport: fix hard lockup on disconnect commit 5c1ea24b53bf3bfb859f0a05573997487975da23 upstream. If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=1 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit d5d2660caef78d4c996d34d123574c8e86f5b5ac Author: Johan Hovold Date: Tue Jun 23 17:08:15 2026 +0200 USB: serial: digi_acceleport: fix broken rx after throttle commit 83a3dfc018943b05b6daf3a6f891833e1aabfa1f upstream. If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 44e73a9f3d62fc8a67b45119bc13efa59f09dff2 Author: Fabio Porcedda Date: Fri Jun 12 13:39:16 2026 +0200 USB: serial: option: add Telit Cinterion FE990D50 compositions commit b33ab1dd80f5c1742f49eb6ec7b337c5ffcf3d32 upstream. Add support for Telit Cinterion FE990D50 compositions: 0x990: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0990 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x991: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0991 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x992: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0992 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x993: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) + tty (diag) + ADPL + adb T: Bus=01 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=0993 Rev=06.06 S: Manufacturer=Telit Cinterion S: Product=FE990 S: SerialNumber=90b6a3ed C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit b069b7029862fafaff331d4c664d97d4ae828d6d Author: Johan Hovold Date: Mon Jun 29 14:45:26 2026 +0200 USB: serial: keyspan_pda: fix information leak commit 6bfc8d01ac4068eced509f8fc74d0cd205e4dcec upstream. The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. Fixes: 034e38e8f687 ("USB: serial: keyspan_pda: add write-fifo support") Cc: stable@vger.kernel.org # 5.11 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f3c4026524d3660c73ef2838b99776d37631e039 Author: Haoxiang Li Date: Tue Jun 23 17:33:25 2026 +0800 usb: mtu3: unmap request DMA on queue failure commit 0bddda5a11665c210339de76d27ebbd1a2e0b43c upstream. mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path. Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver") Cc: stable Signed-off-by: Haoxiang Li Link: https://patch.msgid.link/20260623093325.2105323-1-haoxiang_li2024@163.com Signed-off-by: Greg Kroah-Hartman commit 93563243377f8e9b46cc94d9c4f06533dd31b141 Author: Myeonghun Pak Date: Tue Jul 7 00:10:49 2026 +0900 USB: misc: uss720: unregister parport on probe failure commit b4ecbdc4f8830f5586c4a5cfc384c00f20f8f8b3 upstream. uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: 3295f1b866bf ("usb: misc: uss720: check for incompatible versions of the Belkin F5U002") Cc: stable Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Alex Henrie Link: https://patch.msgid.link/20260706151049.63470-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman commit b715f3ea3b95ee69d0b8b118ff01090bc380991f Author: Xu Rao Date: Tue Jun 2 13:38:42 2026 +0800 USB: storage: include US_FL_NO_SAME in quirks mask commit 2c00e09e3f9f06f8434f5ea2ee6179ce46692ee6 upstream. usb_stor_adjust_quirks() parses the usb-storage.quirks module parameter into a new flag set and then applies it with the quirk mask to override built-in flags. The mask is meant to cover the flags that can be overridden by the module parameter. The 'k' quirk character sets US_FL_NO_SAME, but US_FL_NO_SAME is not included in the mask. As a result, the module parameter can set US_FL_NO_SAME, but it cannot clear a built-in US_FL_NO_SAME flag by providing an override entry that omits 'k'. Add US_FL_NO_SAME to the mask so that the module parameter can override it in the same way as the other supported flags. Fixes: 8010622c86ca ("USB: UAS: introduce a quirk to set no_write_same") Cc: stable Signed-off-by: Xu Rao Reviewed-by: Alan Stern Link: https://patch.msgid.link/3BCE5880F9A45C2E+20260602053842.2920137-1-raoxu@uniontech.com Signed-off-by: Greg Kroah-Hartman commit 665a647b948ace32631afe16f2bf466f49835f83 Author: Myeonghun Pak Date: Wed Jul 1 21:16:25 2026 +0900 usb: sl811-hcd: disable controller wakeup on remove commit 4e8ba83ac4d311992e6a4c21de5dd705010df06e upstream. sl811h_probe() enables the HCD controller device as a wakeup source after usb_add_hcd() succeeds, but sl811h_remove() removes the HCD and releases the driver resources without disabling that wakeup source. Disable controller wakeup after usb_remove_hcd() and before usb_put_hcd() so the wakeup source object is detached while the controller device pointer is still available. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: 3c9740a117d4 ("usb: hcd: move controller wakeup setting initialization to individual driver") Cc: stable Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Link: https://patch.msgid.link/20260701121625.96815-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman commit b4222c05066b252b451f9c8c4730b5b60824ea66 Author: Johan Hovold Date: Mon Jun 22 17:26:12 2026 +0200 USB: legousbtower: fix use-after-free on disconnect race commit 62fc8eb1b1481051f7bab4aa93d79809053dd09f upstream. mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") Fixes: 18bcbcfe9ca2 ("USB: misc: legousbtower: semaphore to mutex") Cc: stable Cc: Daniel Walker Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260622152612.116422-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit f18e895d30cbaa5af9f9fc3ea67e395c6dc2bbe7 Author: Erich E. Hoover Date: Tue Jun 2 14:45:08 2026 -0600 USB: quirks: add NO_LPM for the Samsung T5 EVO Portable SSD commit fc591787785b9709a0bb65a7df3ba2537d611c47 upstream. The Samsung T5 EVO Portable SSD (04e8:6200) exhibit two forms of link instability when USB Link Power Management is enabled: 1. The units fail to initialize properly on first detection, resulting in a lockup in the drive where it must be power cycled or the kernel will not recognize the presence of the device. 2. If used for sustained operations (small amounts of continuous data are transferred to the unit) then the unit will "hiccup" after roughly 8 hours of use and will disconnect and reconnect. This has a certain probability of triggering the first issue, but also causes mount points to become invalid since the device gets issued a new letter. Signed-off-by: Erich E. Hoover Cc: stable Link: https://patch.msgid.link/20260602204508.48856-1-erich.e.hoover@gmail.com Signed-off-by: Greg Kroah-Hartman commit a7bbe946ca3a6eeb6f364d5e84b05e02c7c0d595 Author: Johan Hovold Date: Sat May 23 19:05:23 2026 +0200 USB: iowarrior: fix use-after-free on disconnect commit bc0e4f16c44e50daa0b1ea729934baa3b4815dee upstream. Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler. Fixes: b5f8d46867ca ("USB: iowarrior: fix use-after-free after driver unbind") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Reported-by: syzbot+ad2aac2febc3bedf0962@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/6a0ce39b.170a0220.39a13.0007.GAE@google.com/ Cc: stable Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260523170523.1074563-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit e5a9bdce4bfd3e2226b5f3df5fb8385d6935ee69 Author: Johan Hovold Date: Mon Jun 22 17:26:11 2026 +0200 USB: ldusb: fix use-after-free on disconnect race commit 19bdfc7b3c179331eafa423d87e1336f43bbfeb8 upstream. mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") Fixes: ce0d7d3f575f ("usb: ldusb: ld_usb semaphore to mutex") Cc: stable Cc: Daniel Walker Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260622152612.116422-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 8d53b14ad4ccbff6d306b3a39c812303f4a87d41 Author: Johan Hovold Date: Mon Jun 22 17:26:10 2026 +0200 USB: idmouse: fix use-after-free on disconnect race commit ff002c153f9722caece3983cc23dc4d9d4652cb4 upstream. mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") Fixes: 54d2bc068fd2 ("USB: fix locking in idmouse") Cc: stable@vger.kernel.org # 2.6.24 Cc: Oliver Neukum Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260622152612.116422-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit f845852a5a8914277031f47d8de0f350fef52405 Author: Jimmy Hu Date: Thu Jun 25 15:37:04 2026 +0800 usb: gadget: udc: Fix use-after-free in gadget_match_driver commit 67e511d2989eb1c8c588b599ce2fcc6bb8e6f7ea upstream. The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achieve this, introduce a new usb_gadget_release() routine to the core. When the gadget is added, usb_add_gadget() stores the gadget's release routine in the udc structure and takes a reference to the udc. When the gadget is released, usb_gadget_release() drops the reference to the udc and then calls the gadget's release routine. Suggested-by: Alan Stern Cc: stable Signed-off-by: Jimmy Hu Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260625073705.803880-1-hhhuuu@google.com Signed-off-by: Greg Kroah-Hartman commit d3e72cfef2e38bd588055739a8100d14f9773b17 Author: Maoyi Xie Date: Wed May 27 23:08:32 2026 +0800 usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler commit f8f680609c2b3ab795ffcd6f21585b6dfc46d395 upstream. The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. Fixes: 53e6242db8d6 ("usb: gadget: composite: add USB_DT_OTG request handling") Cc: stable Signed-off-by: Maoyi Xie Link: https://patch.msgid.link/20260527150832.2943293-1-maoyixie.tju@gmail.com Signed-off-by: Greg Kroah-Hartman commit 0dcb774c33179de6654c7a95fafac252dc556b2a Author: WenTao Liang Date: Thu Jun 11 21:11:21 2026 +0800 usb: dwc3: meson-g12a: fix refcount leak in dwc3_meson_g12a_resume() commit 692c354bef03b77b30e57e61934da502c8a12d45 upstream. If dwc3_meson_g12a_resume() succeeds in calling reset_control_reset(), an internal triggered_count reference is acquired. If any later step fails (usb_init, phy_init, phy_power_on, regulator_enable, or usb_post_init), the function returns the error without rearming the reset control. This leaks the reference and leaves the reset control in a triggered state, causing future reset_control_reset() calls to incorrectly return early as if already reset. Add an error path that calls reset_control_rearm() to balance the reference before returning the error. Cc: stable Fixes: 5b0ba0caaf3a ("usb: dwc3: meson-g12a: refactor usb init") Signed-off-by: WenTao Liang Link: https://patch.msgid.link/20260611131121.81784-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 2d73e7703dd6f4ec1558683b755d398243a59f7d Author: Rodrigo Lugathe da Conceição Alves Date: Wed Jun 3 08:36:26 2026 -0300 USB: core: add USB_QUIRK_NO_LPM for VIA Labs USB 2.0 hub commit bd728c3d9b1cc0bb0fda6a7055c5c8b55d7477b2 upstream. The VIA Labs, Inc. USB 2.0 hub controller (2109:2817), found in a KVM switch, fails to enumerate high-power devices during cold boot and system restart. Applying the kernel parameter usbcore.quirks=2109:2817:k resolves the issue. Enumeration failure log: usb 1-1.2.3: device descriptor read/64, error -32 usb 1-1.2.3: Device not responding to setup address. usb 1-1.2.3: device not accepting address 11, error -71 usb 1-1.2-port3: unable to enumerate USB device Add USB_QUIRK_NO_LPM for this device. Signed-off-by: Rodrigo Lugathe da Conceição Alves Cc: stable Link: https://patch.msgid.link/20260603113626.395612-1-lugathe2@gmail.com Signed-off-by: Greg Kroah-Hartman commit 37283f5a47127fbdea567749a2110766af53d18d Author: Haoxiang Li Date: Mon Jun 22 13:26:27 2026 +0800 usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() commit 3348f444a4ce43dd5c2d1aa41634cb6eff33aa64 upstream. cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Cc: stable Signed-off-by: Haoxiang Li Acked-by: Peter Chen Link: https://patch.msgid.link/20260622052627.696373-1-haoxiang_li2024@163.com Signed-off-by: Greg Kroah-Hartman commit 910a3dd1578fffc3d102125f801330a6f03aaf98 Author: Jared Baldridge Date: Sat May 30 18:19:48 2026 -0400 usb: cdc_acm: Add quirk for Uniden BC125AT scanner commit 6eba58568f6cc3ff8515a00b05e258d8cfb72b72 upstream. Uniden BC125AT radio scanner has a USB interface which fails to work with the cdc_acm driver: usb 1-1: new full-speed USB device number 2 using uhci_hcd cdc_acm 1-1:1.0: Zero length descriptor references cdc_acm 1-1:1.0: probe with driver cdc_acm failed with error -22 usbcore: registered new interface driver cdc_acm Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-1: new full-speed USB device number 2 using uhci_hcd cdc_acm 1-1:1.0: ttyACM0: USB ACM device usbcore: registered new interface driver cdc_acm `lsusb -v` of the device: Bus 001 Device 002: ID 1965:0017 Uniden Corporation BC125AT Negotiated speed: Full Speed (12Mbps) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 [unknown] bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0017 BC125AT bcdDevice 0.01 iManufacturer 1 Uniden America Corp. iProduct 2 BC125AT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 [unknown] bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Jared Baldridge Cc: stable Link: https://patch.msgid.link/20260530221959.612526-1-jrb@expunge.us Signed-off-by: Greg Kroah-Hartman commit aa4eef2cbb66ea3dfcfc24bdce798dd78a81b54b Author: Maoyi Xie Date: Mon Jun 22 16:01:57 2026 +0800 net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() commit 47b6bcef6e679593d2e86e04ee72c46a4e2f7139 upstream. kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration. Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/178211531778.2216480.12637613349790980750@maoyixie.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 75bce1a4b26daba49aa2ba8b1e6576e5cf93fd44 Author: Alexey Nepomnyashih Date: Wed Jun 3 20:41:47 2026 +0000 xfs: fix unreachable BIGTIME check in dquot flush validation commit 03866d130ed33ab68cc7faaf4bf2c4abef96d42e upstream. The dqp->q_id == 0 check inside the XFS_DQTYPE_BIGTIME block is unreachable because root dquots return successfully earlier. Reject root dquots with XFS_DQTYPE_BIGTIME before that early return, preserving the intended validation and removing the unreachable condition. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4ea1ff3b4968 ("xfs: widen ondisk quota expiration timestamps to handle y2038+") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Alexey Nepomnyashih Reviewed-by: "Darrick J. Wong" Reviewed-by: Allison Henderson Signed-off-by: Carlos Maiolino Signed-off-by: Greg Kroah-Hartman commit 876c98e0fc65f071680c03c2e2ee3ef7ff9ca078 Author: Deepanshu Kartikey Date: Sun May 3 13:33:29 2026 +0900 nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers commit 0e7a690fe435f8d5ea3feb7c1d8d73ba7e8b8aa9 upstream. Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780 The root cause is that user-supplied segment numbers are not validated before nilfs_clean_segments() begins doing work; the range check on each segnum is performed deep inside the call chain by nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry while still holding the segctor lock and the sufile mi_sem. Under load (repeated invocations across multiple mounts saturating the global printk path), the cumulative printk latency keeps ns_segctor_sem held long enough to trip the hung_task watchdog, blocking concurrent operations such as chmod() that need ns_segctor_sem for read. Fix by validating the contents of kbufs[4] in nilfs_clean_segments() immediately after acquiring ns_segctor_sem via nilfs_transaction_lock(). Holding ns_segctor_sem serializes the check against nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation uses a consistent value. Out-of-range segment numbers are rejected with -EINVAL before any segment-cleaning work begins, so the bad entries never reach the per-element diagnostic path inside nilfs_sufile_updatev(). Reported-by: syzbot+62f0f99d2f2bb8e3bbd7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=62f0f99d2f2bb8e3bbd7 Tested-by: syzbot+62f0f99d2f2bb8e3bbd7@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Deepanshu Kartikey Fixes: 071cb4b81987 ("nilfs2: eliminate removal list of segments") Signed-off-by: Ryusuke Konishi Signed-off-by: Viacheslav Dubeyko Signed-off-by: Greg Kroah-Hartman commit 0b189b2204f1a2612dc68f8d139fb5b80539e710 Author: Tristan Madani Date: Tue May 5 11:12:59 2026 +0000 hfs/hfsplus: zero-initialize buffer in hfs_bnode_read commit d67aadee19ffdf3cc8520c5a4f4d5b2916d30baf upstream. hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken. Reported-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=217eb327242d08197efb Tested-by: syzbot+217eb327242d08197efb@syzkaller.appspotmail.com Fixes: a431930c9bac ("hfs: fix slab-out-of-bounds in hfs_bnode_read()") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Reviewed-by: Viacheslav Dubeyko Signed-off-by: Viacheslav Dubeyko Link: https://lore.kernel.org/r/20260505111300.3592757-3-tristmd@gmail.com Signed-off-by: Viacheslav Dubeyko Signed-off-by: Greg Kroah-Hartman commit 6e5109caeed720350de411e17511da2e0f037549 Author: Srinivas Pandruvada Date: Wed Jun 10 16:29:09 2026 +0800 HID: sensor-hub: Add sensor_hub_input_attr_read_values() for multi-byte reads commit f784fcea450617055d2d12eec5b2f6e0e38bf878 upstream. sensor_hub_input_attr_get_raw_value() is limited to returning a single 32-bit value, which is insufficient for sensors that report data larger than 32 bits, such as a quaternion with four s16 elements. Add sensor_hub_input_attr_read_values() that accepts a caller-provided buffer and accumulates incoming data until the buffer is full. The two paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size being non-zero, preserving backward compatibility. Signed-off-by: Srinivas Pandruvada Co-developed-by: Zhang Lixu Signed-off-by: Zhang Lixu Acked-by: Jiri Kosina Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 4aef9676c26dff8723b56834951cfc6b618f0986 Author: Maoyi Xie Date: Thu Jun 18 15:06:35 2026 +0800 HID: lg-g15: cancel pending work on remove to fix a use-after-free commit 7705b4140d188ce22656f6e541ae7ef834c7e11a upstream. lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event(). Fixes: 97b741aba918 ("HID: lg-g15: Add keyboard and LCD backlight control") Cc: stable@vger.kernel.org Suggested-by: Hans de Goede Signed-off-by: Maoyi Xie Reviewed-by: Hans de Goede Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 3e6473a4f0596182acdda5219b4bebfbee76514f Author: Myeonghun Pak Date: Thu Jun 4 13:56:58 2026 +0900 HID: wacom: stop hardware after post-start probe failures commit ec2612b8ad9e642596db011dd8b6568ef1edeaa1 upstream. wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: c1d6708bf0d3 ("HID: wacom: Do not register input devices until after hid_hw_start") Cc: stable@vger.kernel.org Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 8a270b1258797f61b61da44f8bfd41a581b5c85b Author: WenTao Liang Date: Fri Jun 12 00:17:38 2026 +0800 posix-cpu-timers: Fix pid refcount leak in do_cpu_nanosleep() error path commit 87bd2ad568e15b90d5f7d4bcd70342d05dad649c upstream. In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference via get_pid() and stores it in timer.it.cpu.pid. If the subsequent posix_cpu_timer_set() call fails, the function returns immediately without calling posix_cpu_timer_del() to release the pid reference, causing a leak. Fix it by calling posix_cpu_timer_del() before the unlock-and-return on the error path, consistent with the other exit paths in the same function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: WenTao Liang Signed-off-by: Thomas Gleixner Reviewed-by: Frederic Weisbecker Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260611161738.97043-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 632666a63116d8061c62a988d1ca39dcd6d27c9b Author: Yuho Choi Date: Thu Apr 16 10:46:21 2026 -0400 cpufreq: pcc: fix use-after-free and double free in _OSC evaluation commit 266d3dd8b757b48a576e90f018b51f7b7563cc32 upstream. pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently. Fixes: 0f1d683fb35d ("[CPUFREQ] Processor Clocking Control interface driver") Signed-off-by: Yuho Choi Reviewed-by: Zhongqiu Han Cc: All applicable Link: https://patch.msgid.link/20260416144621.93964-1-dbgh9129@gmail.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 9103078c7b3091a2fbb52af176f95982ee7dd7f8 Author: Tianxiang Chen Date: Wed Apr 8 22:19:14 2026 +0800 cpufreq: Fix hotplug-suspend race during reboot commit a9029dd55696c651ee46912afa2a166fa456bb3e upstream. During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200 Fix this by adding cpus_read_lock()/cpus_read_unlock() to cpufreq_suspend() to block CPU hotplug operations while suspend is in progress. Fixes: 65650b35133f ("cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown") Signed-off-by: Tianxiang Chen Reviewed-by: Zhongqiu Han Cc: All applicable [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260408141914.35281-1-nanmu@xiaomi.com Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit d8312a56d9a162e3ec76476aa487e7d20bc602e9 Author: Steven Rostedt Date: Fri May 15 10:37:40 2026 -0400 sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT commit dd29c017aed628076e915fe4cdfb5392fd4c5cab upstream. RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled. Fixes: b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling") Closes: https://lore.kernel.org/all/20260506235716.2530720-1-tj@kernel.org/ Reported-by: Tejun Heo Signed-off-by: Steven Rostedt Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260515103740.25ccbed8@gandalf.local.home Signed-off-by: Greg Kroah-Hartman commit fb89cf247b812523d8607ee90275c87c2a37f83b Author: Fushuai Wang Date: Wed May 20 11:21:19 2026 +0800 cpufreq: intel_pstate: Sync policy->cur during CPU offline commit bcbdaa1086c25a8a5d48e04e1b82fdfb0682b681 upstream. When a CPU goes offline with HWP disabled, intel_pstate_set_min_pstate() sets the MSR_IA32_PERF_CTL to minimum frequency to prevent SMT siblings from being restricted. However, the policy->cur value was not updated, leaving it at the previous value. When the CPU comes back online, governor->limits() checks if target_freq equals policy->cur and skips the frequency adjustment if they match. Since policy->cur still holds the previous value, the governor does not call cpufreq_driver->target to update MSR_IA32_PERF_CTL. Fix this by synchronizing policy->cur with the hardware state when setting minimum pstate during CPU offline. Fixes: bb18008f8086 ("intel_pstate: Set core to min P state during core offline") Cc: stable@vger.kernel.org # 3.15+ Suggested-by: Srinivas Pandruvada Signed-off-by: Fushuai Wang [ rjw: Subject refinement ] Link: https://patch.msgid.link/20260520032119.30615-1-fushuai.wang@linux.dev Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 3709d73ace37e9aaebb688f5a5cf706d74350b64 Author: Sebastian Andrzej Siewior Date: Mon Jul 13 10:49:43 2026 +0800 net: Drop the lock in skb_may_tx_timestamp() commit 983512f3a87fd8dc4c94dfa6b596b6e57df5aad7 upstream. skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must not be taken in IRQ context, only softirq is okay. A few drivers receive the timestamp via a dedicated interrupt and complete the TX timestamp from that handler. This will lead to a deadlock if the lock is already write-locked on the same CPU. Taking the lock can be avoided. The socket (pointed by the skb) will remain valid until the skb is released. The ->sk_socket and ->file member will be set to NULL once the user closes the socket which may happen before the timestamp arrives. If we happen to observe the pointer while the socket is closing but before the pointer is set to NULL then we may use it because both pointer (and the file's cred member) are RCU freed. Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a matching WRITE_ONCE() where the pointer are cleared. Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de Fixes: b245be1f4db1a ("net-timestamp: no-payload only sysctl") Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Willem de Bruijn Reviewed-by: Jason Xing Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de Signed-off-by: Paolo Abeni [ adapted sk_set_socket() in include/net/sock.h to fix the conflict from not having commit 5d6b58c932ec ("net: lockless sock_i_ino()") and the additional previous changes required by it. It comes down to just now having the lines of if (sock) { WRITE_ONCE(sk->sk_uid, SOCK_INODE(sock)->i_uid); WRITE_ONCE(sk->sk_ino, SOCK_INODE(sock)->i_ino); } below the changed line. ] Signed-off-by: Philo Lu Signed-off-by: Sasha Levin commit f70d4aa88068096f35d73e3a05eff33c0a16b9cd Author: Muhammad Bilal Date: Sun Jun 21 00:56:35 2026 +0500 Bluetooth: L2CAP: validate option length before reading conf opt value commit 687617555cedfb74c9e3cb85d759b908dcb17856 upstream. l2cap_get_conf_opt() derives the option length from the attacker-controlled opt->len field and immediately dereferences opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a raw pointer for the default case) before any caller has confirmed that opt->len bytes are present in the buffer. The callers (l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and l2cap_conf_rfc_get()) only detect a malformed option afterwards, once the running length has gone negative, by which point the out-of-bounds read has already executed. An existing post-hoc length check keeps the garbage value from being consumed, so this is not a data leak in the current control flow. It is still a validate-after-use ordering bug: up to 4 bytes are read past the end of the buffer before it is known to contain them, and it is fragile to future changes in the callers. Fix it at the source. Pass the end of the buffer into l2cap_get_conf_opt() and refuse to touch opt->val unless the full option (header + value) fits. Each caller computes an end pointer once before the loop and checks the return value directly instead of inferring the error from a negative length. Fixes: 7c9cbd0b5e38 ("Bluetooth: Verify that l2cap_get_conf_opt provides large enough buffer") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 96ad400d5132eb333f28f6f1e2d58f0728ca9547 Author: Yousef Alhouseen Date: Sun Jun 28 02:23:05 2026 +0200 Bluetooth: fix UAF in bt_accept_dequeue() commit 4bd0b274054f2679f28b70222b607bb0afc3ab9a upstream. bt_accept_get() takes a temporary reference before dropping the accept queue lock. bt_accept_dequeue() currently drops that reference before bt_accept_unlink(), leaving only the queue reference. bt_accept_unlink() drops the queue reference. The subsequent sock_hold() therefore accesses freed memory if it was the final reference, as observed by KASAN during listening L2CAP socket cleanup. Retain the temporary queue-walk reference through unlink and hand it to the caller on success. Drop it explicitly on the closed and not-yet-connected paths. Fixes: ab1513597c6c ("Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del()") Reported-by: syzbot+674ff7e4d7fdfd572afc@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=674ff7e4d7fdfd572afc Cc: stable@vger.kernel.org Signed-off-by: Yousef Alhouseen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 46a88784c4c9b96954dd86f747ce93f65efa1302 Author: Yousef Alhouseen Date: Sun Jun 28 02:50:58 2026 +0200 Bluetooth: bnep: pin L2CAP connection during netdev registration commit bb067a99a0356196c0b89a95721985485ebce5a5 upstream. bnep_add_connection() reads the L2CAP connection without holding the channel lock, then passes its HCI device to register_netdev(). Controller teardown can clear and release that connection concurrently, leaving the network device registration path to dereference a freed parent device. Take a reference to the L2CAP connection while holding the channel lock. Retain it until register_netdev() has taken the parent device reference. Fixes: 65f53e9802db ("Bluetooth: Access BNEP session addresses through L2CAP channel") Reported-by: syzbot+fed5dce4553262f3b35c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fed5dce4553262f3b35c Cc: stable@vger.kernel.org Signed-off-by: Yousef Alhouseen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit ab63ccefb9c71627f957a0724c2b9ebc869c6f20 Author: Xiang Mei Date: Sun Jul 5 14:58:00 2026 -0700 netfilter: ebtables: terminate table name before find_table_lock() commit a622d2e9608c9dff47fc2e5759ac7aa3a836b45d upstream. update_counters() and compat_update_counters() forward a user-supplied 32-byte table name to find_table_lock() without NUL-terminating it. On a lookup miss, find_inlist_lock() calls try_then_request_module(..., "%s%s", "ebtable_", name), and vsnprintf() reads past the name field and the stack object until it hits a zero byte. BUG: KASAN: stack-out-of-bounds in string (lib/vsprintf.c:648 lib/vsprintf.c:730) Read of size 1 at addr ffff8880119dfb20 by task exploit/147 Call Trace: ... string (lib/vsprintf.c:648 lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) __request_module (kernel/module/kmod.c:150) do_update_counters.isra.0 (net/bridge/netfilter/ebtables.c:371 net/bridge/netfilter/ebtables.c:380) update_counters (net/bridge/netfilter/ebtables.c:1440) do_ebt_set_ctl (net/bridge/netfilter/ebtables.c:2573) nf_setsockopt (net/netfilter/nf_sockopt.c:101) ip_setsockopt (net/ipv4/ip_sockglue.c:1424) raw_setsockopt (net/ipv4/raw.c:847) __sys_setsockopt (net/socket.c:2393) ... compat_do_replace() shares the same unterminated name via compat_copy_ebt_replace_from_user(); terminate it there too so all find_table_lock() callers behave alike. The other callers already terminate the name after the copy. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Cc: stable@vger.kernel.org Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 5777c8f1c3610786d8482b8f620f40fccaf1542b Author: Florian Westphal Date: Sat Jul 4 12:05:15 2026 +0200 netfilter: ebtables: module names must be null-terminated commit 084d23f818321390509e9738a0b08bbf46df6425 upstream. We need to explicitly check the length, else we may pass non-null terminated string to request_module(). Cc: stable@vger.kernel.org Fixes: bcf493428840 ("netfilter: ebtables: Fix extension lookup with identical name") Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit f7e81dc181d9fe8ab977158042cd193e8cc12091 Author: Andrei Kuchynski Date: Mon Apr 27 13:17:21 2026 +0000 mfd: cros_ec: Delay dev_set_drvdata() until probe success commit 8b2c1d41bc36c100b38ce5ee6def246c527eaf8a upstream. If ec_device_probe() fails, cros_ec_class_release releases memory for the cros_ec_dev structure. However, because the drvdata was already set, sub-drivers like cros_ec_typec can still retrieve the stale pointer via the platform device. This leads to a use-after-free when cros_ec_typec attempts to access &typec->ec->ec->dev on a device that has already been released. Move dev_set_drvdata() to ensure that the pointer is only made available once all initialization steps have succeeded. sysfs: cannot create duplicate filename '/class/chromeos/cros_ec' Call trace: sysfs_do_create_link_sd+0x94/0xdc sysfs_create_link+0x30/0x44 device_add_class_symlinks+0x90/0x13c device_add+0xf0/0x50c ec_device_probe+0x150/0x4f0 platform_probe+0xa0/0xe0 ... BUG: KASAN: invalid-access in __memcpy+0x44/0x230 Write at addr f5ffff809e2d33ac by task kworker/u32:5/125 Pointer tag: [f5], memory tag: [fe] Tainted : [W]=WARN, [O]=OOT_MODULE Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3 Workqueue: events_unbound deferred_probe_work_func Call trace: __memcpy+0x44/0x230 cros_ec_check_features+0x60/0xcc [cros_ec_proto] cros_typec_probe+0xe8/0x6e0 [cros_ec_typec] platform_probe+0xa0/0xe0 Cc: stable@vger.kernel.org Fixes: 1c1d152cc5ac ("platform/chrome: cros_ec_dev - utilize new cdev_device_add helper function") Co-developed-by: Sergey Senozhatsky Signed-off-by: Sergey Senozhatsky Signed-off-by: Andrei Kuchynski Reviewed-by: Benson Leung Link: https://patch.msgid.link/20260427131721.1165078-1-akuchynski@chromium.org Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit 27ddf4486c7dbf5bdd393fa8bef6b67179796d98 Author: Wyatt Feng Date: Mon Jun 15 18:31:18 2026 +0800 net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes commit efb8763d7bbb40cff4cc55a6b62c3095a038149c upstream. Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP socket state. The sysctl is stored as an `int` but copied into the `u32` `tp->reordering` field for new sockets, so negative writes wrap to large values. With `tcp_mtu_probing=2`, the wrapped value can overflow the `tcp_mtu_probe()` size calculation and drive the MTU probing path into an out-of-bounds read. Route `tcp_reordering` writes through `proc_dointvec_minmax()` and require it to be at least 1. Also require `tcp_max_reordering` to be at least 1 so the configured maximum cannot become negative either. When registering the table for a non-init network namespace, relocate `extra2` pointers that refer into `init_net.ipv4` so the `tcp_reordering` upper bound follows that namespace's `tcp_max_reordering`. Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`. This keeps the send queue and window checks from being bypassed through signed integer overflow. Fixes: 91cc17c0e5e5 ("[TCP]: MTUprobe: receiver window & data available checks fixed") Cc: stable@vger.kernel.org Reported-by: Yuan Tan Reported-by: Zhengchuan Liang Reported-by: Xin Liu Suggested-by: Eric Dumazet Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/1a5b7e1ef4d70fbad8c8ee0b82d8405f3c964a3d.1781395200.git.bronzed_45_vested@icloud.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c6cb5f8ebe1c1a78710c19f102db9fe48b9e6ba9 Author: Yuyang Huang Date: Thu Jul 2 08:50:14 2026 +0900 ipv4: igmp: remove multicast group from hash table on device destruction commit 7993211bde166471dffac074dc965489f86531f8 upstream. When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0 Fixes: e9897071350b ("igmp: hash a hash table to speedup ip_check_mc_rcu()") Cc: stable@vger.kernel.org Signed-off-by: Yuyang Huang Reviewed-by: Kuniyuki Iwashima Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260701235014.73505-1-yuyanghuang@google.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit d179533c610e1b4c6aa436e3c1fd1b719d2c727c Author: Runyu Xiao Date: Thu May 28 01:22:03 2026 +0800 io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item commit 29bef9934b2521f787bb15dd1985d4c0d12ae02a upstream. commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") fixed the obvious case where io_worker_handle_work() took one exit-bit snapshot before draining pending work, but the fix stops one level too early. io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work run loop, yet it still snapshots that bit once before processing a whole dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT after the first linked item has started, the remaining linked items can still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue running after exit has begun. Move the check further inside, so it covers linked items too. Note: this is a syzbot special as it loves setting up tons of slow linked work on weird devices like msr that take forever to read, and immediately close the ring. Exit then takes a long time. Fixes: 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work run loop") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260527172203.2043962-1-runyu.xiao@seu.edu.cn Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 581ac2ad001ff1128931191f249a7f2074672b7a Author: Runyu Xiao Date: Wed Jun 17 23:40:35 2026 +0800 gpio: eic-sprd: use raw_spinlock_t in the irq startup path commit 90f0109019e6817eb40a486671b7722d1544ae29 upstream. sprd_eic_irq_unmask() enables the GPIO IRQ and then updates controller state through sprd_eic_update(), which takes sprd_eic->lock with spin_lock_irqsave(). The callback can be reached from irq_startup() while setting up a requested IRQ. That path is not sleepable, but on PREEMPT_RT a regular spinlock_t becomes a sleeping lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the request_threaded_irq() -> __setup_irq() -> irq_startup() -> sprd_eic_irq_unmask() -> sprd_eic_update() carrier and used the original spin_lock_irqsave(&sprd_eic->lock) edge. Lockdep reported: BUG: sleeping function called from invalid context hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv] sprd_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv] sprd_eic_update.constprop.0+0x48/0x90 [vuln_msv] sprd_eic_irq_unmask.constprop.0+0x35/0x50 [vuln_msv] __setup_irq.constprop.0+0xd/0x30 [vuln_msv] Convert the Spreadtrum EIC controller lock to raw_spinlock_t. The locked section only serializes MMIO register updates and does not contain sleepable operations, so keeping it non-sleeping is appropriate for the irqchip callbacks. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Reviewed-by: Sebastian Andrzej Siewior Link: https://patch.msgid.link/20260617154035.1199948-3-runyu.xiao@seu.edu.cn Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 33bba331a4a5fee8b6026fe72eca13cceeec1b7b Author: Koichiro Den Date: Wed Mar 4 17:30:28 2026 +0900 NTB: epf: Avoid calling pci_irq_vector() from hardirq context commit 4dcddc1c794d1c65eda68f1f8dd04a0fecc0870f upstream. ntb_epf_vec_isr() calls pci_irq_vector() in hardirq context to derive the vector number. pci_irq_vector() calls msi_get_virq() that takes a mutex and can therefore trigger "scheduling while atomic" splats: BUG: scheduling while atomic: kworker/u33:0/55/0x00010001 ... Call trace: ... schedule+0x38/0x110 schedule_preempt_disabled+0x28/0x50 __mutex_lock.constprop.0+0x848/0x908 __mutex_lock_slowpath+0x18/0x30 mutex_lock+0x4c/0x60 msi_domain_get_virq+0xe8/0x138 pci_irq_vector+0x2c/0x60 ntb_epf_vec_isr+0x28/0x120 [ntb_hw_epf] __handle_irq_event_percpu+0x70/0x3a8 handle_irq_event+0x48/0x100 handle_edge_irq+0x100/0x1c8 ... Cache the Linux IRQ number for vector 0 when vectors are allocated and use it as a base in the ISR. Running the ISR in a threaded IRQ handler would also avoid the problem, but that would be unnecessary here. Fixes: 812ce2f8d14e ("NTB: Add support for EPF PCI Non-Transparent Bridge") Signed-off-by: Koichiro Den Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Reviewed-by: Dave Jiang Cc: stable@vger.kernel.org # v5.12+ Link: https://patch.msgid.link/20260304083028.1391068-3-den@valinux.co.jp Signed-off-by: Greg Kroah-Hartman commit 964c3fae1dfc49dde5468eace940f199cda234e9 Author: Yunpeng Tian Date: Mon May 4 07:19:43 2026 -0700 fs/ntfs3: validate Dirty Page Table capacity in log_replay copy_lcns commit 57382ec6ac63b63dce2789e835fded28b698ae79 upstream. In the analysis pass of $LogFile journal replay, log_replay() copies LCNs from each action log record into an existing Dirty Page Table (DPT) entry without bounding the destination index. A crafted NTFS image with DPT entry lcns_follow=1 and an action log record with lcns_follow=2 produces a kernel slab out-of-bounds write at mount time: BUG: KASAN: slab-out-of-bounds in log_replay+0x654c/0xdb60 Write of size 8 at addr ffff8880095e1040 by task mount Two attacker-controlled fields can drive j+i past the allocated page_lcns[] array: 1. dp->lcns_follow (capacity) can be smaller than lrh->lcns_follow. 2. lrh->target_vcn may be smaller than dp->vcn, making the u64 subtraction wrap to a huge size_t. Validate target VCN delta and per-record LCN count against the DPT entry capacity, bail via the existing out: cleanup label with -EINVAL. This mirrors the bounds-check pattern added in commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") and commit 0ca0485e4b2e ("fs/ntfs3: validate rec->used in journal-replay file record check"). Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal") Reported-by: Yunpeng Tian Reported-by: Mingda Zhang Reported-by: Gongming Wang Reported-by: Peiyuan Xu Reported-by: Qinrun Dai Cc: stable@vger.kernel.org Signed-off-by: Yunpeng Tian Signed-off-by: Konstantin Komarov Signed-off-by: Greg Kroah-Hartman commit 203a965bf2ab43130778d8214fb0c3c8c2d19cdf Author: Thomas Gleixner Date: Sun Jun 21 16:47:44 2026 +0200 debugobjects: Plug race against a concurrent OOM disable commit b81dde13cc163450dcb402dcc915ef13ba241e01 upstream. syzbot reported a puzzling splat: WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20 stub_timer() is installed as timer callback function in hrtimer_fixup_assert_init(), which is invoked when debug_object_assert_init() can't find a shadow object. In that case debug objects emits a warning about it before invoking the fixup. Though the provided console log lacks this warning and instead has the following a few seconds before the splat: ODEBUG: Out of memory. ODEBUG disabled So the object was looked up in debug_object_assert_init() and the lookup failed due a concurrent out of memory situation which disabled debug objects and freed the shadow objects: debug_object_assert_init() if (!debug_objects_enabled) return; obj = alloc(); if (!obj) { // Out of memory debug_objects_enabled = false; free_objects(); obj = lookup_or_alloc(); // The lookup failed because the other side // removed the objects, so this returns // an error code as the object in question // is not statically initialized if (!IS_ERR_OR_NULL(obj)) return; if (!obj) { debug_oom(); return; } print(...) if (!debug_objects_enabled) return; fixup(...) The debug object splat is skipped because debug_objects_enabled is false, but the fixup callback is invoked unconditionally, which makes the timer disfunctional. This is only a problem in debug_object_assert_init() and debug_object_activate() as both have to handle statically initialized objects and therefore must handle the error pointer return case gracefully. All other places only handle the found/not found case and the NULL pointer return is a signal for OOM. Otherwise they get a valid shadow object. Plug the hole by checking whether debug objects are still enabled before invoking the print and fixup function in those two places. Fixes: b84d435cc228 ("debugobjects: Extend to assert that an object is initialized") Reported-by: syzbot+5e8dda76ca21dae314b6@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/874iiwlzlb.ffs@fw13 Signed-off-by: Greg Kroah-Hartman commit b35597bdae1a5d8395da4b9baa993b9b71f74d68 Author: Chi Wang Date: Fri Jun 19 15:42:44 2026 +0800 audit: Fix data races of skb_queue_len() readers on audit_queue commit c9a71daaecb2fb1d8c704545cc0b1c920b9bf5d7 upstream. Multiple readers access audit_queue.qlen via skb_queue_len() without holding the queue lock or using READ_ONCE(), while kauditd writes to this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE() protected by a spinlock. This constitutes data races. All affected skb_queue_len(&audit_queue) call sites: - kauditd_thread() wait_event_freezable() condition - audit_receive_msg() AUDIT_GET handler (s.backlog assignment) - audit_receive() backlog check - audit_log_start() backlog check and pr_warn() KCSAN reports the following conflicting access pattern (one example): ================================================================== BUG: KCSAN: data-race in audit_log_start / skb_dequeue write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57: skb_dequeue+0x70/0xf0 kauditd_send_queue+0x71/0x220 kauditd_thread+0x1cb/0x430 kthread+0x1c2/0x210 ret_from_fork+0x162/0x1a0 ret_from_fork_asm+0x1a/0x30 read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1: audit_log_start+0x2a0/0x6b0 audit_core_dumps+0x64/0xa0 do_coredump+0x14b/0x1260 get_signal+0xeb2/0xf70 arch_do_signal_or_restart+0x41/0x170 exit_to_user_mode_loop+0xa2/0x1c0 do_syscall_64+0x1a3/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0xe0 value changed: 0x00000001 -> 0x00000000 ================================================================== Resolve the race by switching to lockless helper skb_queue_len_lockless(), which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE() write accesses already present on the writer side. Cc: stable@vger.kernel.org Fixes: 3197542482df ("audit: rework audit_log_start()") Signed-off-by: Chi Wang Reviewed-by: Ricardo Robaina [PM: line length tweak] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 01b9115b55018123ef2449ac4951f89147a8428e Author: Zijing Yin Date: Mon Jun 8 07:44:41 2026 -0700 net: af_key: initialize alg_key_len for IPComp states commit d129c3177d7b1138fd5066fcc63a698b3ba415b0 upstream. pfkey_msg2xfrm_state() handles the IPComp (SADB_X_SATYPE_IPCOMP) case by allocating x->calg and copying only the algorithm name: x->calg = kmalloc_obj(*x->calg); if (!x->calg) { err = -ENOMEM; goto out; } strcpy(x->calg->alg_name, a->name); x->props.calgo = sa->sadb_sa_encrypt; Unlike the authentication (x->aalg) and encryption (x->ealg) branches of the same function, the compression branch never initializes calg->alg_key_len. IPComp carries no key and the allocation only reserves sizeof(struct xfrm_algo) (i.e. no room for a key), so the field is left containing uninitialized slab data. calg->alg_key_len is later used as a length by xfrm_algo_clone() when an IPComp state is cloned during XFRM_MSG_MIGRATE: xfrm_state_migrate() xfrm_state_clone_and_setup() x->calg = xfrm_algo_clone(orig->calg); kmemdup(orig, xfrm_alg_len(orig)); where xfrm_alg_len() returns sizeof(*alg) + (alg_key_len + 7) / 8. With a non-zero garbage alg_key_len, kmemdup() reads past the end of the 68-byte calg object. Adding an IPComp SA via PF_KEY and then migrating it triggers (net-next, KASAN, init_on_alloc=0): BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x44/0x60 Read of size 4164 at addr ff11000025a74980 by task diag2/9287 CPU: 3 UID: 0 PID: 9287 Comm: diag2 7.1.0-rc6-g903db046d557 #1 Call Trace: dump_stack_lvl+0x10e/0x1f0 print_report+0xf7/0x600 kasan_report+0xe4/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 kmemdup_noprof+0x44/0x60 xfrm_state_migrate+0x70a/0x1da0 xfrm_migrate+0x753/0x18a0 xfrm_do_migrate+0xb47/0xf10 xfrm_user_rcv_msg+0x411/0xb50 netlink_rcv_skb+0x158/0x420 xfrm_netlink_rcv+0x71/0x90 netlink_unicast+0x584/0x850 netlink_sendmsg+0x8b0/0xdc0 ____sys_sendmsg+0x9f7/0xb90 ___sys_sendmsg+0x134/0x1d0 __sys_sendmsg+0x16d/0x220 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 9287: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 pfkey_add+0x2652/0x2ea0 pfkey_process+0x6d0/0x830 pfkey_sendmsg+0x42c/0x850 __sys_sendto+0x461/0x4b0 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x116/0x7d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The buggy address belongs to the object at ff11000025a74980 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes inside of allocated 68-byte region [ff11000025a74980, ff11000025a749c4) Depending on the uninitialized value the same field can instead request an oversized kmemdup() allocation and make the migration clone fail. The XFRM netlink path is not affected: verify_one_alg() rejects an XFRMA_ALG_COMP attribute shorter than xfrm_alg_len(), so a calg added via XFRM_MSG_NEWSA is always self-consistent. Initialize calg->alg_key_len to 0, matching the aalg/ealg branches. Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Cc: stable@vger.kernel.org Signed-off-by: Zijing Yin Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit c80360b4e85099fc3835378a96a59c0a2480fb07 Author: Dawei Feng Date: Fri May 8 12:24:16 2026 +0800 crypto: amlogic - avoid double cleanup in meson_crypto_probe() commit 6d827ade51a24e18d81afb9f32756d339520a14c upstream. When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meson_allocate_chanlist() fail after partial initialization. On the unpatched kernel this reliably triggered a slab-use-after-free. With this fix applied, the same reproducer no longer emits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lockdep_init_map_type+0x4b/0x220 ? do_raw_spin_unlock+0x53/0x220 idempotent_init_module+0x330/0x610 ? __pfx_idempotent_init_module+0x10/0x10 ? __pfx_cred_has_capability.isra.0+0x10/0x10 ? ksys_mmap_pgoff+0x385/0x520 __x64_sys_finit_module+0xbe/0x120 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7d6d31690d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f3 b4 0f 00 f7 d8 > RSP: 002b:00007fffc027ac68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055f7b81967c0 RCX: 00007f7d6d31690d RDX: 0000000000000000 RSI: 000055f79a0d6cd2 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 000055f79a0d6cd2 R13: 000055f7b8196790 R14: 000055f79a0d5888 R15: 000055f7b81968e0 Fixes: 48fe583fe541 ("crypto: amlogic - Add crypto accelerator for amlogic GXL") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 37f642d47c3648a707df3ceb092eee1adffbfd28 Author: Alexandru Hossu Date: Fri May 22 02:45:28 2026 +0200 staging: rtl8723bs: fix OOB write in HT_caps_handler() commit f8001e1a516ba3b495728c65b61f799cbfad6bd0 upstream. HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Reviewed-by: Luka Gejak Link: https://patch.msgid.link/20260522004531.1038924-5-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit ea3809f7e20bdff282b8cc1e94937d5fb9fb32c7 Author: Alexandru Hossu Date: Fri May 22 02:45:30 2026 +0200 staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop commit 3bf39f711ff27c64be8680a8938bcc5001982e81 upstream. The loop in is_ap_in_tkip() iterates over IEs without verifying that enough bytes remain before dereferencing the IE header or its payload: - pIE->element_id and pIE->length are read without checking that i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the buffer causes an OOB read. - For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12, which requires pIE->length >= 16. For WLAN_EID_RSN it compares pIE->data + 8, requiring pIE->length >= 12. Neither requirement is checked. Add the missing IE header and payload bounds checks and guard each data access with an explicit pIE->length minimum, matching the pattern established in update_beacon_info(). Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-7-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman commit 605ebd94d0f469204f3c9f2f84acc71e43e2780f Author: Alexandru Hossu Date: Fri May 22 02:45:26 2026 +0200 staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl() commit ef61d628dfad38fead1fd2e08979ae9126d011d5 upstream. Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-3-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman commit 5e8db4cff5b45c7c4edc8ae3f302027c3bb32b25 Author: Alexandru Hossu Date: Fri May 22 02:45:25 2026 +0200 staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop commit ed51de4a86e173c3b0ef78e039c2e49e08b11f16 upstream. The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-2-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman commit 889ca6000ac7fa73457b041848fcb08e0d51b809 Author: Alexandru Hossu Date: Fri May 22 02:45:29 2026 +0200 staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop commit f9654207e92283e0acac5d64fe5f8835383b5a23 upstream. The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Reviewed-by: Luka Gejak Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman commit 87cccc2a767f17dcab71e3b9fe5ae29b5516c5ce Author: Alexandru Hossu Date: Fri May 22 02:46:05 2026 +0200 staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth() commit a1fc19d61f661d47204f095b593de507884849f7 upstream. OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient(). Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004605.1039209-1-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman commit 2eefb439e2f1c7e2d1b1a37fc863e02e77d9b955 Author: Arnd Bergmann Date: Wed Mar 25 13:59:43 2026 +0100 staging: media: atomisp: reduce load_primary_binaries() stack usage commit f4d51e55dd47ef467fbe37d8575e20eee41b092d upstream. The load_primary_binaries() function is overly complex and has som large variables on the stack, which can cause warnings depending on CONFIG_FRAME_WARN setting: drivers/staging/media/atomisp/pci/sh_css.c: In function 'load_primary_binaries': drivers/staging/media/atomisp/pci/sh_css.c:5260:1: error: the frame size of 1560 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] Half of the stack usage is for the prim_descr[] array, but only one member of the array is used at any given time. Reduce the stack usage by turning the array into a single structure. Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Reviewed-by: Andy Shevchenko Signed-off-by: Sakari Ailus Signed-off-by: Greg Kroah-Hartman commit 57bff664fc630b6f7732662809de5dd557d23451 Author: Ricardo Ribalda Date: Thu May 7 20:58:10 2026 +0000 media: staging: ipu3-imgu: Add range check for imgu_css_cfg_acc_stripe commit c32fe4c4918c9aa49f61359e3b42619c4d8686de upstream. If the driver's stripe information is invalid it can result in an integer underflow. Add a range check to avoid this kind of error. This patch fixes the following smatch error: drivers/staging/media/ipu3/ipu3-css-params.c:1792 imgu_css_cfg_acc_stripe() warn: 'acc->stripe.bds_out_stripes[0]->width - 2 * f' 4294967168 can't fit into 65535 'acc->stripe.bds_out_stripes[1]->offset' Cc: stable@vger.kernel.org Fixes: e11110a5b744 ("media: staging/intel-ipu3: css: Compute and program ccs") Signed-off-by: Ricardo Ribalda Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 016f5995c37a5a2c45198308f830f244517d70b7 Author: Samuel Page Date: Thu Jun 25 15:38:15 2026 +0100 tipc: fix out-of-bounds read in broadcast Gap ACK blocks commit 2b66974a1b6134a4bbc3bfed181f7418f688eb54 upstream. A broadcast PROTOCOL/STATE_MSG can carry a Gap ACK blocks record in its data area. tipc_get_gap_ack_blks() only verifies that the record's len field is self-consistent with its ugack_cnt/bgack_cnt counts (sz == struct_size(p, gacks, ugack_cnt + bgack_cnt)); it does not check that the record actually fits in the message data area, msg_data_sz(). The unicast caller tipc_link_proto_rcv() bounds it ("if (glen > dlen) break;"), but the broadcast caller tipc_bcast_sync_rcv() discards the returned size, so tipc_link_advance_transmq() copies the record off the receive skb with an attacker-controlled count: this_ga = kmemdup(ga, struct_size(ga, gacks, ga->bgack_cnt), GFP_ATOMIC); A TIPC neighbour that negotiated TIPC_GAP_ACK_BLOCK triggers it with one ordinary broadcast STATE_MSG (msg_bc_ack_invalid() clear), sized so its data area is short, carrying a Gap ACK record with len = 0x400, bgack_cnt = 0xff and ugack_cnt = 0. len then equals struct_size(p, gacks, 255), so the consistency check passes and ga is non-NULL; kmemdup() reads struct_size(ga, gacks, 255) = 1024 bytes out of the much smaller skb: BUG: KASAN: slab-out-of-bounds in kmemdup_noprof+0x48/0x60 Read of size 1024 at addr ffff0000c7030d38 by task poc864/69 Call trace: kmemdup_noprof+0x48/0x60 tipc_link_advance_transmq+0x86c/0xb80 tipc_link_bc_ack_rcv+0x19c/0x1e0 tipc_bcast_sync_rcv+0x1c4/0x2c4 tipc_rcv+0x85c/0x1340 tipc_l2_rcv_msg+0xac/0x104 The buggy address belongs to the object at ffff0000c7030d00 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 56 bytes inside of allocated 704-byte region [ffff0000c7030d00, ffff0000c7030fc0) The copied-out bytes are subsequently consumed as gap/ack values, but the read is already out of bounds at the kmemdup() regardless of how they are used. The unicast STATE path drops such a message: "if (glen > dlen) break;" skips the rest of STATE_MSG handling and the skb is freed. Make the broadcast path drop it too. tipc_bcast_sync_rcv() now bounds the record against msg_data_sz() and, when it does not fit, reports it back through tipc_node_bc_sync_rcv() to tipc_rcv() so the skb is discarded rather than processed. ga is not cleared on this path: ga == NULL already means "legacy peer without Selective ACK", a distinct legitimate state. Fixes: d7626b5acff9 ("tipc: introduce Gap ACK blocks for broadcast link") Cc: stable@vger.kernel.org Signed-off-by: Samuel Page Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260625143815.1525412-1-sam@bynar.io Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 80b5c8779acee0550845394fb3e5176a398aa24c Author: Yizhou Zhao Date: Tue Jun 9 16:00:52 2026 +0800 6lowpan: fix NHC entry use-after-free on error path commit 1720db928e5a58ca7d75ac1d514c3b73fd7061a7 upstream. lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding lowpan_nhc_lock. If the descriptor has no uncompress callback, the error path drops the lock before printing nhc->name. lowpan_nhc_del() removes descriptors under the same lock and then relies on synchronize_net() before the owning module can be unloaded. That only waits for net RX RCU readers. lowpan_header_decompress() is also exported and can be reached from callers that are not necessarily covered by the net core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive path. This leaves a race where one task drops lowpan_nhc_lock in the error path, another task unregisters and frees the matching descriptor after synchronize_net() returns, and the first task then dereferences nhc->name for the warning. With the post-unlock window widened, KASAN reports: BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220 Read of size 8 lowpan_nhc_do_uncompression lowpan_header_decompress Fix this by printing the warning before dropping lowpan_nhc_lock, so the descriptor name is read while unregister is still excluded. The malformed packet is still rejected with -ENOTSUPP. Fixes: 92aa7c65d295 ("6lowpan: add generic nhc layer interface") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Signed-off-by: Yizhou Zhao Acked-by: Alexander Aring Link: https://patch.msgid.link/20260609080054.4541-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b399be2958456efe1b64b19c55a54a24e9035769 Author: Runyu Xiao Date: Fri Jun 12 13:20:05 2026 +0800 usb: dwc3: run gadget disconnect from sleepable suspend context commit 010382937fb69892b3469ac4d30af072262f59e8 upstream. dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window. Fixes: c8540870af4c ("usb: dwc3: gadget: Improve dwc3_gadget_suspend() and dwc3_gadget_resume()") Cc: stable Signed-off-by: Runyu Xiao Acked-by: Thinh Nguyen Link: https://patch.msgid.link/20260612052005.3849659-1-runyu.xiao@seu.edu.cn Signed-off-by: Greg Kroah-Hartman commit 5ec61fbef9ec5635c492ae63dfb5d13f2bdf1023 Author: Alan Stern Date: Tue Jun 9 13:37:36 2026 -0400 USB: chaoskey: Fix slab-use-after-free in chaoskey_release() commit abf76d3239dee97b66e7241ad04811f1ce562e28 upstream. The chaoskey driver has a use-after-free bug in its release routine. If the user closes the device file after the USB device has been unplugged, a debugging log statement will try to access the usb_interface structure after it has been deallocated: BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406) Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) dev_driver_string (drivers/base/core.c:2406) __dynamic_dev_dbg (lib/dynamic_debug.c:906) chaoskey_release (drivers/usb/misc/chaoskey.c:323) __fput (fs/file_table.c:510) fput_close_sync (fs/file_table.c:615) __x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The driver's last reference to the interface structure is dropped in the chaoskey_free() routine, so the code must not use the interface -- even in a debugging statement -- after that routine returns. (Exception: If we know that another reference is held by someone else, such as the device core while the disconnect routine runs, there's no problem. Thanks to Johan Hovold for pointing this out.) Since the bad access is part of an unimportant debugging statement, we can fix the problem simply by removing the whole statement. Reported-by: Shuangpeng Bai Closes: https://lore.kernel.org/linux-usb/20EC9664-054E-438B-B411-2145D347F97B@gmail.com/ Tested-by: Shuangpeng Bai Signed-off-by: Alan Stern Fixes: 66e3e591891d ("usb: Add driver for Altus Metrum ChaosKey device (v2)") Cc: stable Reviewed-by: Johan Hovold Link: https://patch.msgid.link/bb5b1dc6-eb59-43e1-8d26-51e658e88bbe@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 63335e7b638ae70028ae285bb95153874a8bc852 Author: Michael Bommarito Date: Sun May 31 10:22:51 2026 -0400 hwrng: virtio: clamp device-reported used.len at copy_data() commit e3046eeada299f917a8ad883af4434bfb86556b1 upstream. random_recv_done() stores the device-reported used.len directly into vi->data_avail. copy_data() then indexes vi->data[] using vi->data_idx (advanced by previous copy_data() calls) and issues a memcpy() without re-validating either value against the posted buffer size sizeof(vi->data) (SMP_CACHE_BYTES bytes, typically 32 or 64). A malicious or buggy virtio-rng backend can set used.len beyond sizeof(vi->data), steering the memcpy() past the end of the inline array into adjacent kmalloc-1k slab bytes. hwrng_fillfn() mixes those bytes into the guest RNG, and guest root can also observe them directly via /dev/hwrng. Concrete impact is inside the guest: - Memory-safety / hardening: any virtio-rng backend that over-reports used.len causes the driver to read past vi->data into unrelated slab contents. hwrng_fillfn() is a kernel thread that runs as soon as the device is probed; no guest userspace interaction is required to first-trigger the OOB. - Cross-boundary leak (confidential-compute threat model): a malicious hypervisor cooperating with a malicious or compromised guest root userspace can use /dev/hwrng as a leak channel for guest-kernel heap data. The host sets a large used.len, guest root reads /dev/hwrng, and the returned bytes contain guest kernel slab contents that were adjacent to vi->data. In practice, confidential-compute guests (SEV-SNP, TDX) usually disable virtio-rng entirely, so this path is narrow, but the fix is still worth carrying because the underlying memory-safety bug contaminates the guest RNG on any host. KASAN confirms the OOB on a 7.1-rc4 guest whose virtio-rng backend has been patched to report used.len = 0x10000: BUG: KASAN: slab-out-of-bounds in virtio_read+0x394/0x5d0 Read of size 64 at addr ffff88800ae0ba20 by task hwrng/52 Call Trace: __asan_memcpy+0x23/0x60 virtio_read+0x394/0x5d0 hwrng_fillfn+0xb2/0x470 kthread+0x2cc/0x3a0 Allocated by task 1: probe_common+0xa5/0x660 virtio_dev_probe+0x549/0xbc0 The buggy address belongs to the object at ffff88800ae0b800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes to the right of allocated 544-byte region [ffff88800ae0b800, ffff88800ae0ba20) Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened usb9pfs_rx_complete() against unchecked device-reported length in the USB 9p transport. With the clamp at point of use and array_index_nospec() in place, the same harness boots cleanly: copy_data() returns zero for the bogus report, the device-supplied bytes after data_idx are discarded, and the driver issues a fresh request. Fixes: f7f510ec1957 ("virtio: An entropy device, as suggested by hpa.") Cc: stable@vger.kernel.org Suggested-by: Michael S. Tsirkin Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael S. Tsirkin Message-ID: <20260531142251.2792061-1-michael.bommarito@gmail.com> Signed-off-by: Greg Kroah-Hartman commit 20bbc1e1876029a4ad62dc28aa9f809a4e558583 Author: Johan Hovold Date: Mon Apr 27 16:37:10 2026 +0200 virtio-mmio: fix device release warning on module unload commit c687bc35694698ec4c7f92bf929c3d659f0cecb8 upstream. Driver core expects devices to be allocated dynamically and complains loudly when a device that lacks a release function is freed. Use __root_device_register() to allocate and register the root device instead of open coding using a static device. Note that root_device_register(), which also creates a link to the module, cannot be used as the device is registered when parsing the module parameters which happens before the module kobject has been set up. Fixes: 81a054ce0b46 ("virtio-mmio: Devices parameter parsing") Cc: stable@vger.kernel.org # 3.5 Cc: Pawel Moll Signed-off-by: Johan Hovold Signed-off-by: Michael S. Tsirkin Message-ID: <20260427143710.14702-1-johan@kernel.org> Signed-off-by: Greg Kroah-Hartman commit 1bc67c3fc98e9fc07032cc56afcdbc690c47d11e Author: Xiang Mei Date: Wed Jun 24 18:00:06 2026 -0700 netfilter: ipset: fix race between dump and ip_set_list resize commit 7cd9103283b26b917360ec99d7d2f2d761bcf1ab upstream. The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception Fixes: 8a02bdd50b2e ("netfilter: ipset: Fix calling ip_set() macro at dumping") Cc: stable@vger.kernel.org Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Acked-by: Jozsef Kadlecsik Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit 339b2d415fb0bd037c74a5f82721e2800a25983e Author: Ratheesh Kannoth Date: Tue Apr 14 13:47:30 2026 +0530 PCI: host-common: Request bus reassignment when not probe-only commit fda8749ba73638f5bbca3ffb39bc6861eb3b23fa upstream. pci_host_common_init() is used by several generic ECAM host drivers. After PCI core changes around pci_flags and preserve_config, these hosts no longer opted into full bus number reassignment the way they did before, which broke enumeration of devices on a Marvell CN106XX board. When PCI_PROBE_ONLY is not set, add PCI_REASSIGN_ALL_BUS so pci_scan_bridge_extend() takes the reassignment path: bus numbers can be assigned from firmware EA data (e.g. pci_ea_fixed_busnrs()). Skip the flag in probe-only mode so existing assignments are not overridden. Fixes: 7246a4520b4b ("PCI: Use preserve_config in place of pci_flags") Closes: https://lore.kernel.org/all/abkqm_LCd9zAM8cW@rkannoth-OptiPlex-7090/ Signed-off-by: Ratheesh Kannoth [mani: added stable tag] Signed-off-by: Manivannan Sadhasivam [bhelgaas: add problem report link] Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Cc: Vidya Sagar Link: https://patch.msgid.link/20260414081730.3864372-1-rkannoth@marvell.com Signed-off-by: Greg Kroah-Hartman commit 4c47f93735905f87e63b43f3d94521f2d04dd1e2 Author: Mahesh Vaidya Date: Thu Apr 30 13:43:29 2026 -0700 PCI: altera: Do not dispose parent IRQ mapping commit 5ef4bac02189bee0b7c170e352d7a38e13fe9678 upstream. altera_pcie_irq_teardown() calls irq_dispose_mapping() on pcie->irq. However, pcie->irq is the parent IRQ returned by platform_get_irq(), not the mapping created by Altera INTx irq_domain. The Altera driver only sets the chained handler on the parent IRQ. It should detach that handler during teardown, but it should not dispose the parent IRQ mapping, which belongs to the parent interrupt controller's irq_domain. Drop irq_dispose_mapping(pcie->irq) from the teardown path. Note that during irqchip remove(), the child IRQs should've disposed. But since the chained handler itself is removed, there is no way the stale child IRQs (if exists) could fire. So it is safe here. Fixes: ec15c4d0d5d2 ("PCI: altera: Allow building as module") Signed-off-by: Mahesh Vaidya [mani: added a note about IRQ disposal] Signed-off-by: Manivannan Sadhasivam Reviewed-by: Subhransu S. Prusty Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260430204330.3121003-2-mahesh.vaidya@altera.com Signed-off-by: Greg Kroah-Hartman commit d107eb316144c5fb958486e7fe604cd7f1b35cda Author: 胡连勤 Date: Fri Jul 3 17:40:33 2026 +0300 usb: xhci: Fix sleep in atomic context in xhci_free_streams() commit 42c37c4b75d38b51d84f31a8e29427f5e06a7c2a upstream. When a USB device with active stream endpoints is disconnected, xhci_free_streams() is called from the hub_event workqueue to free the stream resources. It calls xhci_free_stream_info() while holding xhci->lock with irqs disabled. xhci_free_stream_info() invokes xhci_free_stream_ctx(), which calls dma_free_coherent() for large stream context arrays. dma_free_coherent() can sleep (e.g. via vunmap), triggering a BUG when called from atomic context. Call trace: dma_free_attrs+0x174/0x220 xhci_free_stream_info+0xd0/0x11c xhci_free_streams+0x278/0x37c usb_free_streams+0x98/0xc0 usb_unbind_interface+0x1b8/0x2f8 device_release_driver_internal+0x1d4/0x2cc device_release_driver+0x18/0x28 bus_remove_device+0x160/0x1a4 device_del+0x1ec/0x350 usb_disable_device+0x98/0x214 usb_disconnect+0xf0/0x35c hub_event+0xab4/0x19ec process_one_work+0x278/0x63c Fix this by saving the stream_info pointers and clearing the ep references under the lock, then calling xhci_free_stream_info() outside the lock where sleeping is allowed. Fixes: 8df75f42f8e6 ("USB: xhci: Add memory allocation for USB3 bulk streams.") Cc: stable Signed-off-by: Lianqin Hu Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260703144033.483286-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 0be901ab1dcc4af59b88f2e324493bb283850167 Author: Carlos Llamas Date: Fri Jun 19 18:52:31 2026 +0000 binder: fix UAF in binder_free_transaction() commit f223d27a546c1e1f48d38fd67760e78f068fe8c4 upstream. In binder_free_transaction(), the t->to_proc is read under the t->lock. However, once the t->lock is dropped, the to_proc can die in parallel. This leads to a use-after-free error when we attempt to acquire its inner lock right afterwards: ================================================================== BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x1a0 Write of size 4 at addr ffff00001125da70 by task B/672 CPU: 20 UID: 0 PID: 672 Comm: B Not tainted 7.1.0-rc6-00284-g8e65320d91cd #4 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: _raw_spin_lock+0xe4/0x1a0 binder_free_transaction+0x8c/0x320 binder_send_failed_reply+0x21c/0x2f8 binder_thread_release+0x488/0x7e0 binder_ioctl+0x12c0/0x29a0 [...] Allocated by task 675: __kmalloc_cache_noprof+0x174/0x444 binder_open+0x118/0xb70 do_dentry_open+0x374/0x1040 vfs_open+0x58/0x3bc [...] Freed by task 212: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_proc_dec_tmpref+0x32c/0x5e0 binder_deferred_func+0xc48/0x104c process_one_work+0x53c/0xbc0 [...] ================================================================== To prevent this, pin the target thread (t->to_thread) to guarantee the target process remains alive. Undelivered transactions without a target thread are already safe, as the target process can only be the current context in those paths. Cc: stable Reported-by: Alice Ryhl Closes: https://lore.kernel.org/all/aikJKVuny_eOivwN@google.com/ Fixes: a370003cc301 ("binder: fix possible UAF when freeing buffer") Signed-off-by: Carlos Llamas Reviewed-by: Alice Ryhl Link: https://patch.msgid.link/20260619185233.2194678-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit df1a17abba8d6fac5f965adcb8113ceace6e4949 Author: Carlos Llamas Date: Fri Jun 19 18:52:30 2026 +0000 binder: fix UAF in binder_thread_release() commit 114a116aaa5f0295376cdf12da743c5bce3b20ce upstream. When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc. Cc: stable Fixes: 7a4408c6bd3e ("binder: make sure accesses to proc/thread are safe") Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://patch.msgid.link/20260619185233.2194678-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 640680cb18e86a98d4cb6639dfe521e36e7bcb27 Author: Johan Hovold Date: Thu Jun 4 08:37:38 2026 +0200 Bluetooth: btusb: fix wakeup source leak on probe failure commit 3d93e1bb0fb881fe3ef961d1120556658e9cac4d upstream. Make sure to disable wakeup on probe failure to avoid leaking the wakeup source. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Cc: stable@vger.kernel.org # 4.11 Cc: Rajat Jain Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 0ccb1cb0a464dab78284c34196cd3e8e18bab4c4 Author: Johan Hovold Date: Thu Jun 4 08:37:37 2026 +0200 Bluetooth: btusb: fix use-after-free on marvell probe failure commit c5b600a3c05b1a7a110d558df935a8fc8a471c79 upstream. Make sure to stop any TX URBs submitted during Marvell OOB wakeup configuration on later probe failures to avoid use-after-free in the completion callback. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org Fixes: a4ccc9e33d2f ("Bluetooth: btusb: Configure Marvell to use one of the pins for oob wakeup") Cc: stable@vger.kernel.org # 4.11 Cc: Rajat Jain Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 468fcdfaeb937163dd250773a9fed17ab1fa203c Author: Johan Hovold Date: Thu Jun 4 08:37:36 2026 +0200 Bluetooth: btusb: fix use-after-free on registration failure commit eedc6867ebad73edbfaf9a0a65fbef7115cc4753 upstream. Make sure to release the sibling interfaces in case controller registration fails to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. Link: https://sashiko.dev/#/patchset/20260402092704.2346710-1-johan%40kernel.org Fixes: 9bfa35fe422c ("[Bluetooth] Add SCO support to btusb driver") Fixes: 9d08f50401ac ("Bluetooth: btusb: Add support for Broadcom LM_DIAG interface") Cc: stable@vger.kernel.org # 2.6.27 Reviewed-by: Paul Menzel Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 9999f56598c82f3f8251fb9a7e82c5805c475996 Author: Cássio Gabriel Date: Sun Apr 19 17:30:32 2026 -0300 ALSA: usb-audio: Update US-16x08 EQ/comp shadow state after successful writes commit a440c17869ecd71da0f295b62868fc742d09a8ba upstream. snd_us16x08_comp_put() and snd_us16x08_eq_put() update their software stores before sending the USB write. If the transfer fails, later get callbacks report a value the hardware never accepted. Build the outgoing message from the current store plus the pending value, then commit the store only after a successful write. Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260419-usb-write-error-propagation-v1-4-5a3bd4a673ae@gmail.com Signed-off-by: Greg Kroah-Hartman commit 9e7a1109947a426853467c87383ccb54a73e6830 Author: Cássio Gabriel Date: Wed Apr 29 10:20:02 2026 -0300 ALSA: usb-audio: Update Babyface Pro control caches only after successful writes commit d8f802ccf1fdbeb89d62748d6a0d0fbd442c8127 upstream. snd_bbfpro_ctl_put() and snd_bbfpro_vol_put() cache the requested packed control state in kcontrol->private_value before issuing the USB write. Their get and resume paths use that cached value directly, so a failed write can leave the driver reporting and later replaying a setting the hardware never accepted. Update the cached state only after a successful USB write. Fixes: 3e8f3bd04716 ("ALSA: usb-audio: RME Babyface Pro mixer patch") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260429-alsa-usb-quirks-cache-rollback-v1-2-01b35c688b80@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4dff113a54e516c597c232caa9cead457ba83670 Author: Cássio Gabriel Date: Wed Apr 29 10:20:01 2026 -0300 ALSA: usb-audio: Roll back quirk control caches on write errors commit 6380957fa24251856a532e48a46a4dc3d1ae26b6 upstream. Several mixer quirk callbacks cache the requested control value in kcontrol->private_value before issuing a single vendor or class write. Their paired get and resume paths consume that cache directly, so a failed write currently leaves software state changed even though the update did not succeed. That can make later reads report a value the device never accepted and can replay the stale cache on resume. Restore the previous cached value on failure in the Audigy2NX LED, Emu0204 channel switch, Xonar U1 output switch, Native Instruments controls, FTU effect program switch, and Sound Blaster E1 input source switch. Fixes: 9cf3689bfe07 ("ALSA: usb-audio: Add audigy2nx resume support") Fixes: 5f503ee9e270 ("ALSA: usb-audio: Add Emu0204 channel switch resume support") Fixes: 2bfb14c3b8fb ("ALSA: usb-audio: Add Xonar U1 resume support") Fixes: da6d276957ea ("ALSA: usb-audio: Add resume support for Native Instruments controls") Fixes: 0b4e9cfcef05 ("ALSA: usb-audio: Add resume support for FTU controls") Fixes: 388fdb8f882a ("ALSA: usb-audio: Support changing input on Sound Blaster E1") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260429-alsa-usb-quirks-cache-rollback-v1-1-01b35c688b80@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 4ed20e1798fef4735f2940ccef2c92c44eaa57e4 Author: Cássio Gabriel Date: Sun Apr 19 17:30:31 2026 -0300 ALSA: usb-audio: Propagate US-16x08 write errors in route/mix EQ-switch put callbacks commit 3c06aec8abda6ba068b58a8b7119cdb2a48456b1 upstream. Several US-16x08 mixer put callbacks log failed control URBs but still return success to userspace. That hides device write failures even though the requested value was not applied. Return the negative write error instead in the route, master, bus, channel, and EQ switch put callbacks. Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260419-usb-write-error-propagation-v1-3-5a3bd4a673ae@gmail.com Signed-off-by: Greg Kroah-Hartman commit afe185c6800999b94580e1ec2ceb2c57305da1b4 Author: Cássio Gabriel Date: Sun Apr 19 17:30:30 2026 -0300 ALSA: usb-audio: Propagate errors in scarlett_ctl_enum_put() commit 0f25cf1f02e3dba626791d949c759a48c0a44996 upstream. scarlett_ctl_enum_put() ignores the return value from snd_usb_set_cur_mix_value() and reports success whenever the requested enum value differs from the current one. If the SET_CUR request fails, the callback still returns success even though neither the hardware state nor the cached mixer value changed. Fixes: 76b188c4b370 ("ALSA: usb-audio: Scarlett mixer interface for 6i6, 18i6, 18i8 and 18i20") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20260419-usb-write-error-propagation-v1-2-5a3bd4a673ae@gmail.com Signed-off-by: Greg Kroah-Hartman commit 4566bf8ae9dbfe81bdc2ff1702d59db8a233b06e Author: Darvell Long Date: Wed Jun 24 07:37:23 2026 -0700 ALSA: usb-audio: avoid kobject path lookup in DualSense match commit 7693c0cc415f3a16a7a3355f245474a5e661be4e upstream. The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. Fixes: 79d561c4ec04 ("ALSA: usb-audio: Add mixer quirk for Sony DualSense PS5") Cc: Assisted-by: Cute:gpt-5.5 Signed-off-by: Darvell Long Link: https://patch.msgid.link/20260624143723.2986353-1-contact@darvell.me Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit ebbffacda6733dcbcef601b5b523460f8d8b671e Author: Maoyi Xie Date: Sun Jun 21 23:09:07 2026 +0800 ALSA: firewire: isight: bound the sample count to the packet payload commit 29b9667982e4df2ed7744f86b1144f8bb58eb698 upstream. isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. Fixes: 3a691b28a0ca ("ALSA: add Apple iSight microphone driver") Suggested-by: Takashi Sakamoto Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Link: https://patch.msgid.link/178205454729.1900991.7807310178296762772@maoyixie.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6c4efebaf73e217efbd08cdbda805758a7db3680 Author: Zhao Dongdong Date: Wed May 27 20:09:09 2026 +0800 ALSA: es1938: check snd_ctl_new1() return value commit 1edd1f02dddd20aeb6066ded41017615766ea42f upstream. snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. Assisted-by: Opencode:DeepSeek-V4-Flash Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhao Dongdong Link: https://patch.msgid.link/tencent_E0DC65165FDF2C8982BAFB6794B854B53B0A@qq.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 70d6d4cfa4ad09688aed2ec8a0cfa72c31f60334 Author: Maoyi Xie Date: Thu Jun 18 14:03:15 2026 +0800 ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser commit f7f3f9fd81e7adbaa12c2e62ee07f0e094a543fd upstream. snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. Fixes: 15c5ab607045 ("ALSA: snd-usb-caiaq: Add support for Traktor Kontrol S4") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Link: https://patch.msgid.link/178176259547.3343534.2724779296835237429@maoyixie.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f9e79210b16b6e595c28ea03970e0cd8048da556 Author: Cássio Gabriel Date: Fri May 15 10:32:25 2026 -0300 ALSA: virtio: Add missing 384 kHz PCM rate mapping commit 83fbbcb7935ec6d2c8ba3bc133e8a0ead2ab0b2d upstream. The VirtIO sound UAPI defines VIRTIO_SND_PCM_RATE_384000, and ALSA has SNDRV_PCM_RATE_384000. However, virtio-snd's rate conversion tables stop at 192 kHz. A device advertising only 384 kHz is rejected as having no supported PCM frame rates. A device advertising 384 kHz together with lower rates does not expose 384 kHz through the ALSA hardware constraints. The selected ALSA rate also needs a reverse mapping for SET_PARAMS. Add the missing 384 kHz entries to both conversion tables. Fixes: 29b96bf50ba9 ("ALSA: virtio: build PCM devices and substream hardware descriptors") Fixes: da76e9f3e43a ("ALSA: virtio: PCM substream operators") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260515-alsa-virtio-384k-rate-v1-1-35ecb5df835c@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 44c621205a145e29790cb48de5082d6b498ede8d Author: Liviu Stan Date: Mon May 25 19:39:29 2026 +0300 iio: temperature: ltc2983: Fix reinit_completion() called after conversion start commit 5cb9fdb446bfc3ae0524496f53fb68e67051701b upstream. reinit_completion() was called after regmap_write() initiated the hardware conversion, creating a race window where the interrupt could fire and call complete() before reinit_completion() reset the completion. Move reinit_completion() before the regmap_write() to close the race. ltc2983_eeprom_cmd() already does it in the correct order. Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983") Signed-off-by: Liviu Stan Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 328109ab30ee7bce577342029677d8eb836b1842 Author: Andy Shevchenko Date: Wed May 6 10:27:55 2026 +0200 iio: magnetometer: ak8975: Add missed pm_runtime_put_autosuspend() call commit e94944d7364d3ddb273539492f9bd9c9a622549a upstream. On the failure in the ak8975_read_axis() the PM runtime gets unbalanced. Balance it by calling pm_runtime_put_autosuspend() on error path as well. Fixes: cde4cb5dd422 ("iio: magn: ak8975: deploy runtime and system PM") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260505-magnetometer-fixes-v5-0-831b9b5550fc%40gmail.com Signed-off-by: Andy Shevchenko Reviewed-by: Joshua Crofts Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit f681c5159423d7afa4ecba78373033e349465cae Author: Javier Carrasco Date: Thu May 14 14:01:11 2026 +1300 iio: light: veml6030: fix channel type when pushing events commit c52bb33b641ebaae3e209f97714cb1758206f7d9 upstream. The events are registered for IIO_LIGHT and not for IIO_INTENSITY. Use the correct channel type. When at it, fix minor checkpatch code style warning (alignment). Cc: stable@vger.kernel.org Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit f8f8dc77f9f84cfcc4c6300399a727e1211f42a4 Author: Stepan Ionichev Date: Mon May 18 14:43:11 2026 +0500 iio: light: tsl2591: return actual error from probe IRQ failure commit a00ffd15674bfaf8b906503c1600e3d8709af56c upstream. When devm_request_threaded_irq() fails, probe logs the error and then returns -EINVAL, dropping the real error code and breaking the deferred-probe flow for -EPROBE_DEFER. Return ret directly; the IRQ subsystem already prints on failure. Fixes: 2335f0d7c790 ("iio: light: Added AMS tsl2591 driver implementation") Cc: stable@vger.kernel.org Signed-off-by: Stepan Ionichev Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c14d36cb77b06f34cfb9aa98c417c1644df7ad7c Author: Joshua Crofts Date: Tue May 26 13:15:29 2026 +0200 iio: light: opt3001: fix missing state reset on timeout commit c123ca6ee26ad98f70a866ff428b08145c5a24fe upstream. Currently in the function opt3001_get_processed(), there is a check that directly returns -ETIMEDOUT if the conversion IRQ times out, completely bypassing the err label, leaving ok_to_ignore_lock permanently true, potentially breaking the device's falling threshold interrupt detection. Assign -ETIMEDOUT to the return variable and jump to the error label to ensure ok_to_ignore_lock is properly reset. Fixes: 26d90b559057 ("iio: light: opt3001: Fixed timeout error when 0 lux") Reported-by: Sashiko Closes: https://sashiko.dev/#/patchset/20260525-opt3001-cleanup-v4-0-65b36a174f78%40gmail.com?part=1 Signed-off-by: Joshua Crofts Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 7110201c6b21455240c63388f30113f3baafacfc Author: Biren Pandya Date: Sun Jun 14 12:45:49 2026 +0530 iio: light: gp2ap002: fix runtime PM leak on read error commit 38b72267b7e22768a1f26d9935de4e1752a1dc85 upstream. gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the lux value, but if gp2ap002_get_lux() fails, it returns directly. This skips the pm_runtime_put_autosuspend() call at the "out" label, permanently leaking a runtime PM reference and preventing the device from autosuspending. Replace the direct return with a "goto out" to ensure the reference is properly dropped on the error path. Fixes: f6dbf83c17cb ("iio: light: gp2ap002: Take runtime PM reference on light read") Signed-off-by: Biren Pandya Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c1978bbf0cc8994a10f58950ff75427e9b4f629c Author: Vidhu Sarwal Date: Sat Jul 4 17:22:45 2026 +0530 iio: light: al3010: fix incorrect scale for the highest gain range commit aa411adc6ce40ad1a55ebc965f255a4cfc0005f8 upstream. al3010_scales[] encodes the highest gain range as {0, 1187200}. For IIO_VAL_INT_PLUS_MICRO, the fractional part must be less than 1000000, so the scale 1.1872 should instead be represented as { 1, 187200 }. Since write_raw() compares the value from userspace against this table, writing the advertised 1.1872 scale never matches the malformed entry and returns -EINVAL. As a result, the highest gain range cannot be selected. Reading the scale in that state also reports the malformed value. Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver") Signed-off-by: Vidhu Sarwal Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit cf6261d4675ae2a1936715899d1a32a03face660 Author: Andreas Kempe Date: Thu Jul 2 10:41:23 2026 +0000 iio: imu: st_lsm6dsx: deselect shub page before reading whoami commit aede83625ff5d9539508582036df30c809d51058 upstream. As part of driver initialization, e.g. st_lsm6dsx_init_shub() selects the shub register page using st_lsm6dsx_set_page(). Selecting the shub register page shadows the regular register space so whoami, among other registers, is no longer accessible. In applications where the IMU is permanently powered separately from the processor, there is a window where a reset of the CPU leaves the IMU in the shub register page. Once this occurs, any subsequent probe attempt fails because of the register shadowing. Using the ism330dlc, the error typically looks like st_lsm6dsx_i2c 3-006a: unsupported whoami [10] with the unknown whoami read from a reserved register in the shub page. The reset register is also shadowed by the page select, preventing a reset from recovering the chip. Unconditionally clear the shub page before the whoami readout to ensure normal register access and allow the initialization to proceed. Place the fix in st_lsm6dsx_check_whoami() before the whoami check because hw->settings, which st_lsm6dsx_set_page() relies on, is first assigned in that function. Placing the fix in a more logical place than the whoami check would require a bigger restructuring of the code. Fixes: c91c1c844ebd ("iio: imu: st_lsm6dsx: add i2c embedded controller support") Signed-off-by: Andreas Kempe Acked-by: Lorenzo Bianconi Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 91c1d1f7231d340f40340296a4fca639061e81da Author: Runyu Xiao Date: Thu Jun 4 09:42:47 2026 +0800 iio: imu: bmi160: add IRQF_NO_THREAD to data-ready trigger IRQ commit cd5a6a5096b246e10600da3ac47a1274ce9573c8 upstream. bmi160_probe_trigger() registers iio_trigger_generic_data_rdy_poll() through devm_request_irq(), but it passes only irq_type and does not add IRQF_NO_THREAD. When the kernel is booted with forced IRQ threading, the parent IRQ can otherwise be threaded by the IRQ core and the subsequent IIO trigger child IRQ is dispatched from irq/... thread context instead of hardirq context. Because the handler immediately pushes the event into iio_trigger_poll(), this violates the hardirq-only IIO trigger helper contract and can drive downstream trigger consumers through the wrong execution context. Add IRQF_NO_THREAD on top of irq_type when registering the BMI160 data- ready trigger handler. Fixes: 895bf81e6bbf ("iio:bmi160: add drdy interrupt support") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 5de5effd38b52637d35a5be9b0777009cf1e4c3f Author: Stepan Ionichev Date: Mon May 11 11:40:20 2026 +0500 iio: gyro: bmg160: wait full startup time after mode change at probe commit 088fcb9b567f8723074ad9eb1bf5cb46f8a0096b upstream. bmg160_chip_init() calls bmg160_set_mode(BMG160_MODE_NORMAL) and then waits only 500-1000 us. Per the BMG160 datasheet (BST-BMG160-DS000-07 Rev. 1.0, May 2013), the start-up and wake-up times (tsu, twusm) are 30 ms. The same file already waits BMG160_MAX_STARTUP_TIME_MS (80 ms) in bmg160_runtime_resume() after the same set_mode(NORMAL) operation. The 500 us value at probe was likely a unit mix-up; the old comment said "500 ms" while the code used microseconds. Reuse the same constant via msleep() and add a code comment explaining the datasheet basis for the wait. Without this, register writes that follow the mode change can hit the chip before it is ready. Fixes: 22b46c45fb9b ("iio:gyro:bmg160 Gyro Sensor driver") Signed-off-by: Stepan Ionichev Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 77e56ebb1786f4296afd5fa46975a989b285ae65 Author: Stepan Ionichev Date: Sun May 10 07:35:00 2026 +0500 iio: gyro: bmg160: bail out when bandwidth/filter is not in table commit 8320c77e67382d5d55d77043a5f60a867d408a2b upstream. bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry matching the bw_bits value read from the chip: for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) { if (bmg160_samp_freq_table[i].bw_bits == bw_bits) break; } *val = bmg160_samp_freq_table[i].filter; If no entry matches, i ends up equal to the array size and the next line reads one slot past the end. bmg160_set_filter() has the same shape, driven by 'val' instead of bw_bits. smatch flags both: drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error: buffer overflow 'bmg160_samp_freq_table' 7 <= 7 Return -EINVAL when no entry matches. The set_filter() path is reachable from userspace via the sysfs in_anglvel_filter_low_pass_3db_frequency interface, so userspace can trivially trigger the out-of-bounds read with a value that is not in bmg160_samp_freq_table[].filter. Fixes: 22b46c45fb9b ("iio:gyro:bmg160 Gyro Sensor driver") Signed-off-by: Stepan Ionichev Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit d16a702ca7d29c0b7a9b509339d1b044a1cadb32 Author: Lars-Peter Clausen Date: Mon Jul 6 21:48:26 2026 -0700 iio: event: Fix event FIFO reset race commit af791d295737ea6b6ff2c8d8488462a49c14af01 upstream. `iio_event_getfd()` creates the event file descriptor with `anon_inode_getfd()`, which allocates a new fd, creates the anonymous file and installs it in the process fd table before returning to the caller. The IIO code resets the event FIFO after `anon_inode_getfd()` has returned, but before `IIO_GET_EVENT_FD_IOCTL` has copied the fd number to userspace. But since fd tables are shared between threads, another thread can guess the newly allocated fd number and issue a `read()` on it as soon as the fd has been installed. This means the `kfifo_to_user()` in `iio_event_chrdev_read()` can run in parallel with the `kfifo_reset_out()` in `iio_event_getfd()`. The kfifo documentation says that `kfifo_reset_out()` is only safe when it is called from the reader thread and there is only one concurrent reader. Otherwise it is dangerous and must be handled in the same way as `kfifo_reset()`. If that happens, `kfifo_to_user()` can advance the FIFO `out` index based on state from before the reset, after the reset has already moved the `out` index to the current `in` index. That can leave the FIFO with an `out` index past the `in` index. A later `read()` can then see an underflowed FIFO length and copy more data than the event FIFO buffer contains. This can result in an out-of-bounds read and leak adjacent kernel memory to userspace. Move the FIFO reset before `anon_inode_getfd()`. At that point the event fd is marked busy, but the new fd has not been installed yet, so userspace cannot access it while the FIFO is reset. Fixes: b91accafbb10 ("iio:event: Fix and cleanup locking") Reported-by: Codex:gpt-5.5 Signed-off-by: Lars-Peter Clausen Reviewed-by: Nuno Sá Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 1821bcacd8ac5b214c53be16cbb8172bf193f0b6 Author: Maxwell Doose Date: Tue May 26 17:55:24 2026 -0500 iio: chemical: scd30: Cleanup initializations and fix sign-extension bug commit 60d877910a43c305b5165131b258a17b1d772d57 upstream. Include linux/bitfield.h for FIELD_GET(). Create new macros for bit manipulation in combination with manual bit manipulation being replaced with FIELD_GET(). The current variable declaration and initializations are barely readable and use comma separations across multiple lines. Refactor the initializations so that mantissa and exp have separate declarations and sign gets initialized later. In addition (and due to the nature of the cleanup), fix a sign-extension bug where, float32 would get bitwise anded with ~BIT(31) (which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent. Fixes: 64b3d8b1b0f5c ("iio: chemical: scd30: add core driver") Reported-by: sashiko Closes: https://sashiko.dev/#/patchset/20260524020309.18618-1-m32285159%40gmail.com Signed-off-by: Maxwell Doose Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 34522ebc1d86c03089df69a2d0542cb18ab374b7 Author: Pengpeng Hou Date: Thu Jun 25 13:44:07 2026 +0800 iio: adc: ti-ads124s08: Return reset GPIO lookup errors commit 7dc4de2aa6316f1d044cde21f5acfec5f3ec6b47 upstream. devm_gpiod_get_optional() returns NULL when the optional GPIO is absent, but returns an ERR_PTR when the GPIO provider lookup fails, including probe deferral. Probe currently logs the ERR_PTR case as if the reset GPIO were simply absent and keeps the error pointer in reset_gpio. Later ads124s_reset() treats any non-NULL reset_gpio as a valid descriptor and passes it to gpiod_set_value_cansleep(). Return the lookup error instead of retaining the ERR_PTR. Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Cc: stable@vger.kernel.org Reviewed-by: Joshua Crofts Signed-off-by: Pengpeng Hou Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 67a49ab41320b3f721ce4be7447754ff040acbd5 Author: Maxwell Doose Date: Fri Jun 12 19:58:11 2026 -0500 iio: adc: spear: Initialize completion before requesting IRQ commit 3ee2128b6f0eb0be7b6cb8f6e0f1f113a65201a0 upstream. In the report from Jaeyoung Chung: "spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in spear_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ spear_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). Fixes: b586e5d9eee0 ("staging:iio:adc:spear rename device specific state structure to _state") Reported-by: Sangyun Kim Reported-by: Kyungwook Boo Reported-by: Jaeyoung Chung Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/ Signed-off-by: Maxwell Doose Reviewed-by: Vladimir Zapolskiy Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 0e33587967b356519aa6f220b5b43c6976320397 Author: Maxwell Doose Date: Fri Jun 12 19:58:10 2026 -0500 iio: adc: lpc32xx: Initialize completion before requesting IRQ commit e561b35633f450ee607e87a6401d97f156a0cd54 upstream. In the report from Jaeyoung Chung: "lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its interrupt handler with devm_request_irq() before it initializes st->completion with init_completion(). If an interrupt arrives after devm_request_irq() and before init_completion(), the handler calls complete() on an uninitialized completion, causing a kernel panic. The probe path, in lpc32xx_adc_probe(): iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */ ... retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0, LPC32XXAD_NAME, st); /* register handler */ ... init_completion(&st->completion); /* initialize completion */ lpc32xx_adc_isr() calls complete(): complete(&st->completion); If the device raises an interrupt before init_completion() runs, complete() acquires the uninitialized wait.lock and walks the zeroed task_list in swake_up_locked(). The zeroed task_list makes list_empty() return false, so swake_up_locked() dereferences a NULL list entry, triggering a KASAN wild-memory-access." Fix the chance of a spurious IRQ causing an uninitialized pointer dereference by moving init_completion() above devm_request_irq(). Fixes: 7901b2a1453e ("staging:iio:adc:lpc32xx rename local state structure to _state") Reported-by: Sangyun Kim Reported-by: Kyungwook Boo Reported-by: Jaeyoung Chung Closes: https://lore.kernel.org/linux-iio/20260610115700.774689-1-jjy600901@snu.ac.kr/ Signed-off-by: Maxwell Doose Reviewed-by: Vladimir Zapolskiy Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit eeece4a85ece6f3837c75ef26a9b2bf5a1d0fcfc Author: Biren Pandya Date: Sun Jun 14 12:45:46 2026 +0530 iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error commit 44a5fd874bb6873bdaec59f722c1d57832fbc9df upstream. kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync() but returns -EINVAL directly when a scale with a non-zero integer part is requested, skipping the matching pm_runtime_put_autosuspend(). This leaks a runtime PM usage-counter reference on every such write, after which the device can no longer autosuspend. Set the error code and fall through to the existing put instead of returning early. Fixes: 9a9a369d6178 ("iio: accel: kxsd9: Deploy system and runtime PM") Signed-off-by: Biren Pandya Assisted-by: Claude:claude-opus-4-8 coccinelle Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 2fe0531dd73eff1de0f2584cb77716d645e548d5 Author: Bryam Vargas Date: Sat Jun 13 02:18:39 2026 -0500 iio: accel: bmc150: clamp the device-reported FIFO frame count commit ce0e1cae26096fe959a0da5563a6d6d5a801d5fb upstream. __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. Fixes: 3bbec9773389 ("iio: bmc150_accel: add support for hardware fifo") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9ffd567d7bf269824dfac06f8ab9a32fef72699b Author: Griffin Kroah-Hartman Date: Wed Jul 8 13:08:59 2026 +0200 usb: gadget: function: rndis: add length check for header commit 21b5bf155435008e0fb0736795289788e63d426f upstream. Add a length check for the rndis header in rndis_rm_hdr, to ensure that MessageType, MessageLength, DataOffset, and DataLength fields are present before they are accessed. Assisted-by: gkh_clanker_2000 Cc: stable Signed-off-by: Griffin Kroah-Hartman Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-2-e77e026dcc6a@kroah.com Signed-off-by: Greg Kroah-Hartman commit bb2b4402b4571b0c989b977779f7be01107ca425 Author: Griffin Kroah-Hartman Date: Wed Jul 8 13:08:58 2026 +0200 usb: gadget: function: rndis: add length check to response query commit 95f90eea070837f7c72207d5520f805bdefc3bc5 upstream. Add variable representations for BufLength and BufOffset in rndis_query_response(), and perform a length check on them. This is identical to how rndis_set_response() handles these parameters. Assisted-by: gkh_clanker_2000 Cc: stable Signed-off-by: Griffin Kroah-Hartman Link: https://patch.msgid.link/20260708-usb-gadget-rndis-v1-1-e77e026dcc6a@kroah.com Signed-off-by: Greg Kroah-Hartman commit 4ffacf76a457b7ca8ac05f5df8740b0d8f53574a Author: Davidlohr Bueso Date: Thu Jul 9 10:59:49 2026 -0400 locking/rtmutex: Skip remove_waiter() when waiter is not enqueued [ Upstream commit 40a25d59e85b3c8709ac2424d44f65610467871e ] syzbot triggered the following splat in remove_waiter() via FUTEX_CMP_REQUEUE_PI: KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f] class_raw_spinlock_constructor remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561 rt_mutex_start_proxy_lock+0x103/0x120 futex_requeue+0x10e4/0x20d0 __x64_sys_futex+0x34f/0x4d0 task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection, leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") made this fatal. Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter() upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock() (where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to account for try_to_take_rt_mutex(). Fixes: 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()") Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com Signed-off-by: Davidlohr Bueso Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/ Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net Signed-off-by: Sasha Levin commit 838ce5cb5d93c3ab8b27e75bc6ad905a94b752fd Author: Keenan Dong Date: Thu Jul 9 10:59:48 2026 -0400 rtmutex: Use waiter::task instead of current in remove_waiter() [ Upstream commit 3bfdc63936dd4773109b7b8c280c0f3b5ae7d349 ] remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ] Fixes: 8161239a8bcc ("rtmutex: Simplify PI algorithm and make highest prio task get lock") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Keenan Dong Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit c7488c85fd822959e9b5c22fbd9e7c8a21caf5e0 Author: Hem Parekh Date: Sun Jul 5 15:06:30 2026 -0400 ksmbd: fix out-of-bounds read in smb_check_perm_dacl() [ Upstream commit 1ef06004ed4bd6d3ed8c840d9d1a376b66d4935b ] The permission-check ACE walk in smb_check_perm_dacl() validates the ACE header size and caps sid.num_subauth at SID_MAX_SUB_AUTHORITIES, but it never checks that ace->size is actually large enough to contain num_subauth sub-authorities before compare_sids() dereferences them. CIFS_SID_BASE_SIZE covers the SID header up to but excluding the sub_auth[] array, and offsetof(struct smb_ace, sid) is the ACE header, so the existing guards only guarantee the 8-byte SID base, i.e. zero sub-authorities. compare_sids() then reads ace->sid.sub_auth[i] for i < min(local_sid->num_subauth, ace->sid.num_subauth). The local comparison SIDs (sid_everyone, sid_unix_NFS_mode, and the id_to_sid() result) always have at least one sub-authority, and an attacker controls the ACE revision and authority bytes (which lie within the in-bounds SID base), so they can match one of those SIDs and force the sub_auth read. A crafted ACE with size == 16 and num_subauth >= 1 placed at the tail of the security descriptor therefore causes a heap out-of-bounds read of up to SID_MAX_SUB_AUTHORITIES * sizeof(__le32) bytes past the pntsd allocation. The security descriptor is loaded by ksmbd_vfs_get_sd_xattr() into a buffer sized exactly to the on-disk data (kzalloc(sd_size) in ndr_decode_v4_ntacl()), so the read lands past the allocation. The malformed descriptor can be stored verbatim via SMB2_SET_INFO (the DACL is not normalised before being written to the security.NTACL xattr) and the read fires on a subsequent SMB2_CREATE access check, making this reachable by an authenticated client on a share that uses ACL xattrs. Add the missing num_subauth-versus-ace_size check, mirroring the identical guards already present in the sibling parsers parse_dacl() and smb_inherit_dacl(). Fixes: d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") Cc: stable@vger.kernel.org Signed-off-by: Hem Parekh Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 18cc6d57a14fa65ab2a2b52279f549041c4bc9cf Author: Michael Bommarito Date: Sun Jul 5 10:13:55 2026 -0400 NFSv4/flexfiles: reject zero filehandle version count [ Upstream commit 2c6bb3c40bc24f6aa8dfbe6fe98c3ad6389203f2 ] ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. Cc: stable@vger.kernel.org Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ac562193c36696513ae196171892e9338475c4bc Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Sun Jul 5 10:08:59 2026 -0400 fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font() [ Upstream commit 8fdc8c2057eea08d40ce2c8eed41ff9e451c65c2 ] When fbcon_do_set_font() fails (e.g., due to a memory allocation failure inside vc_resize() under heavy memory pressure), it jumps to the `err_out` label to roll back the console state. However, the current rollback logic forgets to restore the `hi_font` state, leading to a severe state machine corruption. Earlier in the function, `set_vc_hi_font()` might be called to change `vc->vc_hi_font_mask` and mutate the screen buffer. If `vc_resize()` subsequently fails, the `err_out` path restores `vc_font.charcount` but entirely skips rolling back the `vc_hi_font_mask` and the screen buffer. This mismatch leaves the terminal in a desynchronized state. Because `vc_hi_font_mask` remains set, the VT subsystem will still accept character indices greater than 255 from userspace and write them to the screen buffer. Subsequent rendering calls (e.g., `fbcon_putcs()`) will then use these inflated indices to access the reverted, 256-character font array, leading to a deterministic out-of-bounds read and potential kernel memory disclosure. Fix this by adding the missing rollback logic for the `hi_font` mask and screen buffer in the error path. Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Reviewed-by: Thomas Zimmermann Signed-off-by: Helge Deller [ Adjust context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a4365bc41baaf67f3a5aa8556d23544e6ec7480a Author: Johan Hovold Date: Sun Jul 5 10:00:53 2026 -0400 i2c: core: fix adapter registration race [ Upstream commit ba14d7cf2fe7284610a29854bdff22b2537d3ce6 ] Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration. Fixes: 6e13e6418418 ("i2c: Add i2c_add_numbered_adapter()") Cc: stable@vger.kernel.org # 2.6.22 Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8448877bf27486786468f9697cd588ecfd80b72e Author: Johan Hovold Date: Sun Jul 5 10:00:52 2026 -0400 i2c: core: fix adapter debugfs creation [ Upstream commit 07d5fb537928aad4369aaff0cbae73ba38a719af ] Clients can be registered from bus notifier callbacks so the debugfs directory needs to be created before registering the adapter as clients use that directory as their debugfs parent. Move debugfs creation before adapter registration to avoid having clients create their debugfs directories in the debugfs root (which is also more likely to fail due to name collisions). Note that failure to allocate the adapter name must now be handled explicitly as debugfs_create_dir() cannot handle a NULL name (unlike device_add() which returns an error). Fixes: 73febd775bdb ("i2c: create debugfs entry per adapter") Cc: stable@vger.kernel.org # 6.8 Cc: Wolfram Sang Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Stable-dep-of: ba14d7cf2fe7 ("i2c: core: fix adapter registration race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9b49b2c4e39cef71819548fea841d3fe0fc0e170 Author: Johan Hovold Date: Sun Jul 5 10:00:51 2026 -0400 i2c: core: fix NULL-deref on adapter registration failure [ Upstream commit 2295d2bb101faa663fbc45fadbb3fec45f107441 ] If adapter registration ever fails the release callback would trigger a NULL-pointer dereference as the completion struct has not been initialised. Note that before the offending commit this would instead have resulted in a minor memory leak of the adapter name. Fixes: 3f8c4f5e9a57 ("i2c: core: fix reference leak in i2c_register_adapter()") Cc: stable@vger.kernel.org Cc: Joe Hattori Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Stable-dep-of: ba14d7cf2fe7 ("i2c: core: fix adapter registration race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8226d0bee05f9f33d69a97875ba3e625d2e00b8d Author: Johan Hovold Date: Sun Jul 5 10:00:50 2026 -0400 i2c: core: fix hang on adapter registration failure [ Upstream commit 3c7e164344e5bcf6f274bbf59a3274f5caad9bc1 ] Clients may be registered from bus notifier callbacks when the adapter is registered. On a subsequent error during registration, the adapter references taken by such clients prevent the wait for the references to be released from ever completing. Fix this by refactoring client deregistration and deregistering also on late adapter registration failures. Fixes: f8756c67b3de ("i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter") Cc: stable@vger.kernel.org # 4.15 Cc: Phil Reid Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Stable-dep-of: ba14d7cf2fe7 ("i2c: core: fix adapter registration race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e6d5d59881f519dd37d8739602a9c0b4cf85b2d4 Author: Johan Hovold Date: Sun Jul 5 10:00:49 2026 -0400 i2c: core: fix irq domain leak on adapter registration failure [ Upstream commit 8ce19524e4cc2462685f596a6402fbd8fb984ab2 ] Make sure to tear down the host notify irq domain on adapter registration failure to avoid leaking it. This issue was flagged by Sashiko when reviewing another adapter registration fix. Fixes: 4d5538f5882a ("i2c: use an IRQ to report Host Notify events, not alert") Cc: stable@vger.kernel.org # 4.10 Cc: Benjamin Tissoires Signed-off-by: Johan Hovold Signed-off-by: Wolfram Sang Stable-dep-of: ba14d7cf2fe7 ("i2c: core: fix adapter registration race") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3d3fcf23993bb756de2f912ab631cfdcc4746554 Author: Denis Arefev Date: Sat Jul 4 09:01:09 2026 -0400 block: Avoid mounting the bdev pseudo-filesystem in userspace [ Upstream commit f73aa66dffcb8e61e78f01b56163ec16a15d06d2 ] The bdev pseudo-filesystem is an internal kernel filesystem with which userspace should not interfere. Unregister it so that userspace cannot even attempt to mount it. This fixes a bug [1] that occurs when attempting to access files, because the system call move_mount() uses pointers declared in the inode_operations structure, which for the bdev pseudo-filesystem are always equal to 0. `inode->i_op = &empty_iops;` [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 23380067 P4D 23380067 PUD 23381067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 PID: 17125 Comm: syz-executor.0 Not tainted 6.1.155-syzkaller-00350-g84221fde2681 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:0x0 Call Trace: lookup_open.isra.0+0x700/0x1180 fs/namei.c:3460 open_last_lookups fs/namei.c:3550 [inline] path_openat+0x953/0x2700 fs/namei.c:3780 do_filp_open+0x1c5/0x410 fs/namei.c:3810 do_sys_openat2+0x171/0x4d0 fs/open.c:1318 do_sys_open fs/open.c:1334 [inline] __do_sys_openat fs/open.c:1350 [inline] __se_sys_openat fs/open.c:1345 [inline] __x64_sys_openat+0x13c/0x1f0 fs/open.c:1345 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/all/20131010004732.GJ13318@ZenIV.linux.org.uk/T/# Cc: stable@vger.kernel.org Signed-off-by: Denis Arefev Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260521072857.5078-1-arefev@swemel.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c8a10f174316e80d577e6549099b71a7a2111f3f Author: Keshav Verma Date: Sat Jul 4 07:49:10 2026 -0400 f2fs: fix listxattr handling of corrupted xattr entries [ Upstream commit 5ef5bc304f23c3fe255d4936472378dcb74d0e94 ] Validate the xattr entry before reading its fields in f2fs_listxattr(). Return -EFSCORRUPTED when the entry is outside the valid xattr storage area instead of returning a successful partial result. Fixes: 688078e7f36c ("f2fs: fix to avoid memory leakage in f2fs_listxattr") Cc: stable@kernel.org Reviewed-by: Chao Yu Signed-off-by: Keshav Verma Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8071500a8124e5a6d47d901a8d5ffd91743107a1 Author: Chao Yu Date: Fri Jul 3 20:46:57 2026 -0400 f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() [ Upstream commit 8b4468ec023d0d1b4669dfb867588997cc03a06b ] When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi); Cc: stable@kernel.org Fixes: 351df4b20115 ("f2fs: add segment operations") Cc: Ruipeng Qi Reported: Sandeep Dhavale Signed-off-by: Chao Yu Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f51db99287b5acf81513ece82a0c95eb5db008e3 Author: Ruipeng Qi Date: Fri Jul 3 20:46:56 2026 -0400 f2fs: fix potential deadlock in f2fs_balance_fs() [ Upstream commit dd3114870771562036fdcf5abe813956f36d224d ] When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:sync state:D stack:0 pid:2769849 tgid:2769849 ppid:736 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 wb_wait_for_completion+0xb0/0xe8 sync_inodes_sb+0xc8/0x2b0 sync_inodes_one_sb+0x24/0x38 iterate_supers+0xa8/0x138 ksys_sync+0x54/0xc8 __arm64_sys_sync+0x18/0x30 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 The root cause is a potential deadlock between the following tasks: kworker/u8:11 Thread A - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback(X) - f2fs_outplace_write_data - bio_add_folio(X) - folio_unlock(X) - truncate_inode_pages_range - __filemap_get_folio(X, FGP_LOCK) - truncate_inode_partial_folio(X) - folio_wait_writeback(X) - f2fs_balance_fs - f2fs_gc - do_garbage_collect - move_data_page - f2fs_get_lock_data_page - __filemap_get_folio(X, FGP_LOCK) Both threads try to access folio X. Thread A holds the lock but waits for writeback, while kworker waits for the lock. This causes a deadlock. Other threads also enter D state, waiting for locks such as gc_lock and writepages. OPU/IPU DATA folio are all affected by this issue. To avoid such potential deadlocks, always commit these cached folios before triggering f2fs_gc() in f2fs_balance_fs(). Suggested-by: Chao Yu Reviewed-by: Chao Yu Signed-off-by: Ruipeng Qi Signed-off-by: Jaegeuk Kim Stable-dep-of: 8b4468ec023d ("f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a08ee30dcbeff6b97df75c38c2589603ddde53a6 Author: Bryam Vargas Date: Fri Jul 3 14:38:18 2026 -0400 f2fs: bound i_inline_xattr_size for non-inline-xattr inodes [ Upstream commit 378acf3cf19b6af6cba55e8dd1154c4e1504bae8 ] When the flexible_inline_xattr feature is enabled, do_read_inode() loads the on-disk i_inline_xattr_size unconditionally: if (f2fs_sb_has_flexible_inline_xattr(sbi)) fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size); but sanity_check_inode() only range-checks it when the inode also has the FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline data but not FI_INLINE_XATTR -- the normal layout for an inline directory -- therefore keeps a fully attacker-controlled i_inline_xattr_size from a crafted image. get_inline_xattr_addrs() returns that value with no flag gating, so it feeds the inode geometry: MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1) NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...) addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY() negative, so make_dentry_ptr_inline() sets d->max (int) to a negative value. The inline directory walk then compares an unsigned long bit_pos against that negative d->max, which is promoted to a huge unsigned bound, and reads far past the inline area: while (bit_pos < d->max) /* fs/f2fs/dir.c */ ... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ... Mounting a crafted image and reading such a directory triggers an out-of-bounds read in f2fs_fill_dentries(); the same underflow also corrupts ADDRS_PER_INODE for regular files. Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the flexible_inline_xattr feature is enabled -- i.e. whenever the value is loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE bound gated on inodes that actually carry an inline xattr, so legitimate inodes with i_inline_xattr_size == 0 are still accepted. Cc: stable@vger.kernel.org Fixes: 6afc662e68b5 ("f2fs: support flexible inline xattr size") Signed-off-by: Bryam Vargas Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ad101d15716f5a24d1fa82a849f80430c805a3dd Author: Wenjie Qi Date: Fri Jul 3 14:03:52 2026 -0400 f2fs: validate orphan inode entry count [ Upstream commit 846c499a65816d13f1186e3090e825e8bb8bcb8b ] f2fs_recover_orphan_inodes() trusts the orphan block entry_count when replaying orphan inodes from the checkpoint pack. A corrupted entry_count larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the ino[] array and interpret footer or following data as inode numbers. On a crafted image, mounting an unpatched kernel can drive orphan recovery into f2fs_bug_on() and panic the kernel. Validate entry_count before consuming entries so corrupted checkpoint data fails the mount with -EFSCORRUPTED and requests fsck instead. Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be recorded in the superblock s_errors[] field. This gives fsck a persistent hint even though mount-time orphan recovery failure may leave no chance to persist SBI_NEED_FSCK through a checkpoint. Cc: stable@kernel.org Fixes: 127e670abfa7 ("f2fs: add checkpoint operations") Signed-off-by: Wenjie Qi Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ Folio API ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0198d579948322cda5178b9672d448375a32f947 Author: Bartosz Golaszewski Date: Fri Jul 3 09:23:46 2026 -0400 device property: initialize the remaining fields of fwnode_handle in fwnode_init() [ Upstream commit 7eba000621fff223dd7bab484d48918c7c77a307 ] If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitialized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. While at it: initialize the remaining fields of struct fwnode_handle too just to be sure. Cc: stable@vger.kernel.org Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Reviewed-by: Sakari Ailus Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260511074927.9473-1-bartosz.golaszewski@oss.qualcomm.com [ Fix typo in commit message. - Danilo ] Signed-off-by: Danilo Krummrich Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dafc90da02336e98b08427316ce7cf497396ca6e Author: Sunmin Jeong Date: Fri Jul 3 09:23:34 2026 -0400 f2fs: fix to round down start offset of fallocate for pin file [ Upstream commit 4275b59673eb60b02eec3997816c83f1f4b909c4 ] Currently, the length of fallocate for pin file is section-aligned to keep allocated sections from being selected as victims of GC. However, for the case that the start offset of fallocate is not aligned in section, the allocated sections can't be fully utilized. It's because a new section is allocated by f2fs_allocate_pinning_section() after using blks_per_sec blocks regardless of the start offset. As a result, several unexpected dirty segments may be created, including blocks assigned to the pinned file. To address this issue, let's round down the start offset of fallocate to the length of section. The reproducing scenario is as below chunk=$(((2<<20)+4096)) # 2MB + 4KB touch test f2fs_io pinfile set test f2fs_io fallocate 0 0 $chunk test f2fs_io fallocate 0 $chunk $chunk test f2fs_io fallocate 0 $((chunk*2)) $chunk test f2fs_io fiemap 0 $((chunk*3)) test Fiemap: offset = 0 len = 12288 logical addr. physical addr. length flags 0 0000000000000000 000000068c600000 0000000000400000 00001088 1 0000000000400000 000000003d400000 0000000000001000 00001088 2 0000000000401000 00000003eb200000 0000000000200000 00001088 3 0000000000601000 00000005e4200000 0000000000001000 00001088 4 0000000000602000 0000000605400000 0000000000200000 00001089 Cc: stable@vger.kernel.org Fixes: f5a53edcf01e ("f2fs: support aligned pinned file") Reviewed-by: Yunji Kang Reviewed-by: Yeongjin Gil Reviewed-by: Sungjong Seo Signed-off-by: Sunmin Jeong Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit efd9ff7d54368f4863beb14d01a611965af8309d Author: Jaegeuk Kim Date: Fri Jul 3 09:23:33 2026 -0400 f2fs: adjust zone capacity when considering valid block count [ Upstream commit 074b5ea2900ea8e40f8e7a3fd37e0a55ad3d5874 ] This patch fixes counting unusable blocks set by zone capacity when checking the valid block count in a section. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: 4275b59673eb ("f2fs: fix to round down start offset of fallocate for pin file") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit fcc051d377a9701a452e7663a1a8223c26225df9 Author: Wenjie Qi Date: Fri Jul 3 08:33:36 2026 -0400 f2fs: validate compress cache inode only when enabled [ Upstream commit 5073c66a96a9c23c0c2533ed4ed06e42f9021208 ] F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode number for the compressed page cache inode. That inode only exists when the compress_cache mount option is enabled. When compress_cache is disabled, max_nid is outside the valid inode range. A corrupted directory entry that points to ino == max_nid should therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino() currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally, so f2fs_iget() bypasses do_read_inode() and its nid range check, and instantiates a fake internal inode instead. Gate the compressed cache inode case on COMPRESS_CACHE, matching f2fs_init_compress_inode(). With compress_cache disabled, ino == max_nid now follows the normal inode path and is rejected as an out-of-range nid. Cc: stable@kernel.org Fixes: 6ce19aff0b8c ("f2fs: compress: add compress_inode to cache compressed blocks") Signed-off-by: Wenjie Qi Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6adfaf07a044ac828ad0e5426a51def9377e3bb6 Author: Chao Yu Date: Fri Jul 3 08:33:35 2026 -0400 f2fs: fix to detect corrupted meta ino [ Upstream commit fcc2d8cc96b2f6141bbbe5b1e8953db990794b44 ] It is possible that ino of dirent or orphan inode is corrupted in a fuzzed image, occasionally, if corrupted ino is equal to meta ino: meta_ino, node_ino or compress_ino, caller of f2fs_iget() from below call paths will get meta inode directly, it's not allowed, let's add sanity check to detect such cases. case #1 - recover_dentry - __f2fs_find_entry - f2fs_iget_retry case #2 - recover_orphan_inode - f2fs_iget_retry Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: 5073c66a96a9 ("f2fs: validate compress cache inode only when enabled") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 20383429b56974507c465d016e5238b189f7a246 Author: Bryam Vargas Date: Thu Jul 2 18:23:09 2026 -0400 apparmor: mediate the implicit connect of TCP fast open sendmsg [ Upstream commit 4d587cd8a72155089a627130bbd4716ec0856e21 ] sendmsg()/sendto() with MSG_FASTOPEN is a combination of connect(2) and write(2): it opens the connection in the SYN. apparmor_socket_sendmsg() only checks AA_MAY_SEND, so a profile that grants send but denies connect lets a confined task open an outbound TCP/MPTCP connection that connect(2) would have refused, bypassing connect mediation. Mediate the implicit connect when MSG_FASTOPEN is set and a destination is supplied. Add it to apparmor_socket_sendmsg() (not the shared aa_sock_msg_perm() helper, which recvmsg also uses) and call aa_sk_perm() directly, mirroring the selinux and tomoyo fixes. sk_is_tcp() does not cover MPTCP fast open, so the SOCK_STREAM/IPPROTO_MPTCP arm is explicit. Fixes: cf60af03ca4e ("net-tcp: Fast Open client - sendmsg(MSG_FASTOPEN)") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Signed-off-by: John Johansen [ expanded sk_is_tcp() (absent in 5.15) into its equivalent sk_is_inet() && SOCK_STREAM && (IPPROTO_TCP || IPPROTO_MPTCP) check ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 866b0f5ae599490bd496fd84581c68ac8b94e6af Author: Maoyi Xie Date: Thu Jul 2 11:26:25 2026 -0400 net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink [ Upstream commit 8165f7ff57d9667d2bb477ef6af83ede7fed4ad7 ] A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. Reported-by: Xiao Liang Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/ Fixes: b57708add314 ("gre: add x-netns support") Cc: stable@vger.kernel.org Signed-off-by: Maoyi Xie Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260612085941.3158249-2-maoyixie.tju@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b17f0c59cc1525765625cf07d0391b7f9c1ed7e5 Author: Ruslan Valiyev Date: Thu Jul 2 11:11:10 2026 -0400 apparmor: fix use-after-free in rawdata dedup loop [ Upstream commit 6f060496d03e4dc560a40f73770bd08335cb7a27 ] aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles. Fixes: a0b7091c4de4 ("apparmor: fix race on rawdata dereference") Reported-by: Colin Ian King Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221513 Cc: stable@vger.kernel.org Signed-off-by: Ruslan Valiyev Signed-off-by: John Johansen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 31a110642b5fb5e61940cbcfb503445ac4f28017 Author: Yiming Qian Date: Thu Jul 2 11:11:01 2026 -0400 net: skmsg: preserve sg.copy across SG transforms [ Upstream commit 406e8a651a7b854c41fecd5117bb282b3a6c2c6b ] The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting. Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Cc: stable@vger.kernel.org Reported-by: Yiming Qian Reported-by: Keenan Dong Signed-off-by: Yiming Qian Link: https://patch.msgid.link/20260610062137.49075-1-yimingqian591@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8877b1f8c5e0504d18ba1c617abe2770be1632d9 Author: Eric Dumazet Date: Thu Jul 2 11:11:00 2026 -0400 skmsg: convert struct sk_msg_sg::copy to a bitmap [ Upstream commit 5a8fb33e530512ee67a11b30f3451a4f030f4b01 ] We have plans for increasing MAX_SKB_FRAGS, but sk_msg_sg::copy is currently an unsigned long, limiting MAX_SKB_FRAGS to 30 on 32bit arches. Convert it to a bitmap, as Jakub suggested. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Stable-dep-of: 406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2cf64b16ac55c42c8989d8c819e42a77549cd680 Author: Pablo Neira Ayuso Date: Wed Apr 17 17:43:11 2024 +0200 netfilter: nf_tables: restore set elements when delete set fails commit e79b47a8615d42c68aaeb68971593333667382ed upstream. From abort path, nft_mapelem_activate() needs to restore refcounters to the original state. Currently, it uses the set->ops->walk() to iterate over these set elements. The existing set iterator skips inactive elements in the next generation, this does not work from the abort path to restore the original state since it has to skip active elements instead (not inactive ones). This patch moves the check for inactive elements to the set iterator callback, then it reverses the logic for the .activate case which needs to skip active elements. Toggle next generation bit for elements when delete set command is invoked and call nft_clear() from .activate (abort) path to restore the next generation bit. The splat below shows an object in mappings memleak: [43929.457523] ------------[ cut here ]------------ [43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [...] [43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 [43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246 [43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000 [43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550 [43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f [43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0 [43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002 [43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0 [43929.458114] Call Trace: [43929.458118] [43929.458121] ? __warn+0x9f/0x1a0 [43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458188] ? report_bug+0x1b1/0x1e0 [43929.458196] ? handle_bug+0x3c/0x70 [43929.458200] ? exc_invalid_op+0x17/0x40 [43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables] [43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables] [43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables] [43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables] [43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables] [43929.458512] ? rb_insert_color+0x2e/0x280 [43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables] [43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables] [43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables] [43929.458701] ? __rcu_read_unlock+0x46/0x70 [43929.458709] nft_delset+0xff/0x110 [nf_tables] [43929.458769] nft_flush_table+0x16f/0x460 [nf_tables] [43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables] Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase") Signed-off-by: Pablo Neira Ayuso [Vegard: CVE-2024-27012; fixed conflicts due to missing commits 0e1ea651c9717ddcd8e0648d8468477a31867b0a ("netfilter: nf_tables: shrink memory consumption of set elements") and 9dad402b89e81a0516bad5e0ac009b7a0a80898f ("netfilter: nf_tables: expose opaque set element as struct nft_elem_priv") so we pass the correct types and values to nft_setelem_data_deactivate(), nft_setelem_validate(), nft_set_elem_ext(), etc.] Signed-off-by: Vegard Nossum [acsjakub: clean cherry-pick of the commit 164936b2fc88 ("netfilter: nf_tables: restore set elements when delete set fails") from 6.6.y. Plus, add "[ Upstream commit .." header to the message] Signed-off-by: Jakub Acs [sidk: clean cherry-pick of the commit faa0deee2721 ("netfilter: nf_tables: restore set elements when delete set fails") from 6.1.y.] Signed-off-by: Sid Kumar Signed-off-by: Greg Kroah-Hartman commit 4186c850789906b875a1d263377a4d37c078e317 Author: Sean Christopherson Date: Wed Jul 8 16:30:49 2026 +0000 KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned() commit f1edbed787ba67988ed34e0132ca128b052b6ce8 upstream. Drop a BUG_ON() that has been reachable since it was first added, way back in 2009, and instead use get_unaligned() to perform potentially-unaligned accesses. For a given store, KVM x86's emulator tracks the entire value in the destination operand, x86_emulate_ctxt.dst. If the destination is memory, and the target splits multiple pages and/or is emulated MMIO, then KVM handles each fragment independently. E.g. on a page split starting at page offset 0xffc, KVM writes 4 bytes to the first page, then the remaining bytes to the second page, using ctxt->dst as the source for both (with appropriate offsets). If the destination splits a page *and* hits emulated MMIO on the second page, then KVM will complete the write to the first page, then emulate the MMIO access to the second page. If there is a datamatch-enabled ioeventfd at offset 0 of the second page, then KVM will process the remainder of the store as a potential ioeventfd signal. Putting it all together, if the guest emits a store that splits a page starting at page offset N, and the second page has a datamatch-enabled ioeventfd at offset 0, then KVM will check for datamatch using &dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being 32-byte aligned, if N is not aligned to @len, the BUG_ON() fires. E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8, all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON() fires due to @val being 4-byte aligned, but not 8-byte aligned. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783! Oops: invalid opcode: 0000 [#1] SMP CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm] Call Trace: __kvm_io_bus_write+0x85/0xb0 [kvm] kvm_io_bus_write+0x53/0x80 [kvm] vcpu_mmio_write+0x66/0xf0 [kvm] emulator_read_write_onepage+0x12a/0x540 [kvm] emulator_read_write+0x109/0x2b0 [kvm] x86_emulate_insn+0x4f8/0xfb0 [kvm] x86_emulate_instruction+0x181/0x790 [kvm] kvm_mmu_page_fault+0x313/0x630 [kvm] vmx_handle_exit+0x18a/0x590 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm] kvm_vcpu_ioctl+0x2d5/0x970 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0x890 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f19c931a9bf Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM x86 doesn't perform alignment checks on "normal" memory accesses at CPL0. Sadly, C99 ruins all the fun; while the x86 architecture plays nice, dereferencing an unaligned pointer directly is undefined behavior in C, e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y. Fixes: d34e6b175e61 ("KVM: add ioeventfd support") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-ID: <20260612225241.678509-1-seanjc@google.com> Signed-off-by: Paolo Bonzini [ Use the old header instead ] Signed-off-by: Darshit Shah Signed-off-by: Sasha Levin commit 5540899da89461cf3bf17227d37cc9c0b73fe256 Author: NeilBrown Date: Mon Sep 8 11:38:33 2025 +1000 nfsd: change nfs4_client_to_reclaim() to allocate data [ Upstream commit 4552f4e3f2c96597914f07b060d5c5db84420ddd ] The calling convention for nfs4_client_to_reclaim() is clumsy in that the caller needs to free memory if the function fails. It is much cleaner if the function frees its own memory. This patch changes nfs4_client_to_reclaim() to re-allocate the .data fields to be stored in the newly allocated struct nfs4_client_reclaim, and to free everything on failure. __cld_pipe_inprogress_downcall() needs to allocate the data anyway to copy it from user-space, so now that data is allocated twice. I think that is a small price to pay for a cleaner interface. Signed-off-by: NeilBrown Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit d838edb3490bcc46da55807d121952b6b757a35d Author: NeilBrown Date: Mon Sep 15 12:55:13 2025 +1000 nfsd: move name lookup out of nfsd4_list_rec_dir() [ Upstream commit 89bd77cf436bf25e448817a662ebf76515f22863 ] nfsd4_list_rec_dir() is called with two different callbacks. One of the callbacks uses vfs_rmdir() to remove the directory. The other doesn't use the dentry at all, just the name. As only one callback needs the dentry, this patch moves the lookup into that callback. This prepares of changes to how directory operations are locked. Signed-off-by: NeilBrown Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Stable-dep-of: 4552f4e3f2c9 ("nfsd: change nfs4_client_to_reclaim() to allocate data") Signed-off-by: Sasha Levin commit 2047eeb38db878a31f58db19d98f8aedf284342e Author: Bjorn Andersson Date: Sat May 30 21:44:18 2026 +0100 slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd [ Upstream commit 2a9d50e9ea406e0c8735938484adc20515ef1b47 ] When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: stable@vger.kernel.org Reviewed-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-6-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 5bc6d4264d923d986c92e1c9c3ee1c563e9b3e88 Author: Uwe Kleine-König Date: Tue Apr 30 10:16:56 2024 +0100 slimbus: Convert to platform remove callback returning void [ Upstream commit 880b33b0580c8ac9d0202b6e592cb116c99d1b65 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert the slimbus drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240430091657.35428-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 2a9d50e9ea40 ("slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd") Signed-off-by: Sasha Levin commit 8214ffb7a3112ede9940adfa8a1cc302b1bb6dcb Author: Bjorn Andersson Date: Sat May 30 21:44:17 2026 +0100 slimbus: qcom-ngd-ctrl: Correct PDR and SSR cleanup ownership [ Upstream commit 960b53a3f76fa214c2fc493734ae7b3c5e713bbf ] PDR and SSR callbacks are registred from the controller probe function, but currently released from the child device's remove function. The remove() function should only be unwinding what was done in the same device's probe() function. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-5-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 03bf148af6954bd7cf64043ee258d46fd27da936 Author: Bjorn Andersson Date: Sat May 30 21:44:16 2026 +0100 slimbus: qcom-ngd-ctrl: Fix probe error path ordering [ Upstream commit 2c22ff152d380ec3d3af099fa05d0ac5ca9b4c1e ] qcom_slim_ngd_ctrl_probe() first registers the SSR callback then allocates the PDR context, as such the error path needs to come in opposite order to allow us to unroll each step. Fixes: 16f14551d0df ("slimbus: qcom-ngd: cleanup in probe error path") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-4-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 71f3a3ba8a598403415d1946ec9e9141d7f75347 Author: Bjorn Andersson Date: Sat May 30 21:44:15 2026 +0100 slimbus: qcom-ngd-ctrl: Fix up platform_driver registration [ Upstream commit 8663e8334d7b6007f5d8a4e5dd270246f35107a6 ] Device drivers should not invoke platform_driver_register()/unregister() in their probe and remove paths. They should further not rely on platform_driver_unregister() as their only means of "deleting" their child devices. Introduce a helper to unregister the child device and move the platform_driver_register()/unregister() to module_init()/exit(). Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: stable@vger.kernel.org Reviewed-by: Dmitry Baryshkov Reviewed-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 3f8393f461d154e53e2f7ed6c09bb157c3f5a502 Author: Tudor Ambarus Date: Fri Jul 3 14:28:01 2026 +0000 dma-buf: remove unused dma-fence-unwrap.c (stable/linux-5.15.y only) The file drivers/dma-buf/dma-fence-unwrap.c was incorrectly added to the 5.15.y stable branch in commit 4e82b9c11d3c ("dma-buf: add dma_fence_timestamp helper") as a new file, but it was never enabled in the Makefile, and its header include/linux/dma-fence-unwrap.h was not present, making it uncompilable. A full revert of commit 4e82b9c11d3c ("dma-buf: add dma_fence_timestamp helper") is not desirable because that commit also introduced the valid dma_fence_timestamp() helper and fixed legitimate timestamp race windows in drivers/dma-buf/sync_file.c and drivers/gpu/drm/scheduler/sched_main.c. Since there are no users of dma-fence-unwrap in the 5.15.y branch, remove the unused file to clean up the tree and avoid confusion. Fixes: 4e82b9c11d3c ("dma-buf: add dma_fence_timestamp helper") Signed-off-by: Tudor Ambarus Signed-off-by: Sasha Levin commit 203355010cb29c7967497a70f7e0308035d5405d Author: Pedro Tammela Date: Fri Apr 21 18:25:13 2023 -0300 net/sched: act_pedit: use NLA_POLICY for parsing 'ex' keys [ Upstream commit 5036034572b79daa6d6600338e8e8229e2a44b09 ] Transform two checks in the 'ex' key parsing into netlink policies removing extra if checks. Signed-off-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 80d647a53cc2f90442dba921d1381ceadd75099c Author: Jiasheng Jiang Date: Fri Jul 3 15:13:38 2026 +0300 clk: imx: Add check for kcalloc commit ed713e2bc093239ccd380c2ce8ae9e4162f5c037 upstream. As the potential failure of the kcalloc(), it should be better to check it in order to avoid the dereference of the NULL pointer. Fixes: 379c9a24cc23 ("clk: imx: Fix reparenting of UARTs not associated with stdout") Signed-off-by: Jiasheng Jiang Reviewed-by: Abel Vesa Link: https://lore.kernel.org/r/20220310080257.1988412-1-jiasheng@iscas.ac.cn Signed-off-by: Abel Vesa Signed-off-by: Alexandra Diupina Signed-off-by: Sasha Levin commit d4026417e8184d13850a0bad4d96ceb6ed9f7152 Author: Kiryl Shutsemau Date: Thu Jul 2 16:49:00 2026 +0100 userfaultfd: gate must_wait writability check on pte_present() [ Upstream commit 8e80af52db652fbc41320eee45a4f73bc029faf2 ] userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE without taking the page table lock and then apply pte_write() / huge_pte_write() to it. Those accessors decode bits from the present encoding only; on a swap or migration entry they read the offset bits that happen to share the same position and return an undefined result. The intent of the check is "is this fault still WP-blocked?". A non-marker swap entry means the page is in transit -- the userfault context the original fault delivered against is no longer the same, and the swap-in or migration completion path will re-deliver a fresh fault if userspace still needs to handle it. Worst case under the current code the garbage write bit says "wait", and the thread stays asleep until a UFFDIO_WAKE that may never arrive. Gate the writability check on pte_present() so the lockless re-check only inspects present-PTE bits when the entry is actually present. The non-present, non-marker case returns "don't wait" and lets the fault path retry. Link: https://lore.kernel.org/20260529172331.356655-6-kas@kernel.org Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges") Fixes: 63b2d4174c4a ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl") Signed-off-by: Kiryl Shutsemau Reported-by: Sashiko AI review Reviewed-by: Lorenzo Stoakes Cc: David Hildenbrand Cc: Michal Hocko Cc: Mike Rapoport Cc: Peter Xu Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Balbir Singh Cc: Signed-off-by: Andrew Morton [ kas: apply to fs/userfaultfd.c and fold the pte_present()/ huge_pte_present() gate into the existing writability checks; this tree predates the marker/return-style refactor of these functions ] Signed-off-by: Kiryl Shutsemau Signed-off-by: Sasha Levin commit bc2baca02ec56da7707a74ed5d340b0a1dff1841 Author: Jeff Layton Date: Thu Jul 2 23:37:05 2026 -0400 nfsd: reset write verifier on deferred writeback errors commit 2090b05803faab8a9fa62fbff871007862cac1b7 upstream. nfsd_vfs_write() and nfsd_commit() both call filemap_check_wb_err() to detect deferred writeback errors, but neither rotates the server's write verifier (nn->writeverf) when this check fails. Every other durable-storage-failure path in these functions calls commit_reset_write_verifier() before returning an error. The missing rotation means clients holding UNSTABLE write data under the current verifier will COMMIT, receive the unchanged verifier back, and conclude their data is durable — silently dropping data that failed writeback. This violates the UNSTABLE+COMMIT durability contract (RFC 1813 §3.3.7, RFC 8881 §18.32). Add commit_reset_write_verifier() calls at both filemap_check_wb_err() error sites, matching the pattern used by adjacent error paths in the same functions. The helper already filters -EAGAIN and -ESTALE internally, so the calls are unconditionally safe. Reported-by: Chris Mason Fixes: 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t") Cc: stable@vger.kernel.org Assisted-by: kres:claude-opus-4-6 Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever [ cel: open-code the reset; commit_reset_write_verifier() is v6.7 ] Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 2e0a5d6d62600b8c614d1b55e50ef94035d6adf9 Author: Chris Mason Date: Thu Jul 2 23:38:15 2026 -0400 nfsd: release layout stid on setlease failure commit 30d55c8aabb261bc3f427d6b9aae7ef6206063f9 upstream. nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). Fixes: c5c707f96fc9 ("nfsd: implement pNFS layout recalls") Cc: stable@vger.kernel.org Assisted-by: kres (claude-opus-4-7) Signed-off-by: Chris Mason Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever [ cel: no ls_fence_work in 5.15.y; dropped INIT_DELAYED_WORK hunk ] Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 66a259e1dcfd65be475711d0207987041c31fa40 Author: Krzysztof Kozlowski Date: Wed Mar 2 20:25:22 2022 +0100 nfc: llcp: protect nfc_llcp_sock_unlink() calls [ Upstream commit a06b8044169f6d5c3eb34772c13d2c0c1b205352 ] nfc_llcp_sock_link() is called in all paths (bind/connect) as a last action, still protected with lock_sock(). When cleaning up in llcp_sock_release(), call nfc_llcp_sock_unlink() in a mirrored way: earlier and still under the lock_sock(). Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9c63cf80895a70eb4fcfcaa725bb1ac9ae76f02b Author: Chaitanya Kulkarni Date: Thu Jul 2 20:37:57 2026 +0800 nvmet-tcp: fix race between ICReq handling and queue teardown commit 5293a8882c549fab4a878bc76b0b6c951f980a61 upstream. nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver") Cc: stable@vger.kernel.org Reported-by: Shivam Kumar Tested-by: Shivam Kumar Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch [ context diff adaptation: drop `queue->state = NVMET_TCP_Q_FAILED` since the enum introduced in 6.7, 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall" ] Signed-off-by: Philo Lu Signed-off-by: Sasha Levin