commit eceeec79dbc646d6dace49ed1ba2f656683d5537 Author: Greg Kroah-Hartman Date: Fri Jun 19 13:33:51 2026 +0200 Linux 5.15.210 Link: https://lore.kernel.org/r/20260616145100.376842714@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Shuah Khan Tested-by: Pavel Machek (CIP) Link: https://lore.kernel.org/r/20260617080316.111043001@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Mark Brown Tested-by: Barry K. Nathan Tested-by: Ron Economos Tested-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit 4435888e1bf139d2bfe5911643d4217382136743 Author: Zhengchuan Liang Date: Sat Apr 4 17:39:48 2026 +0800 netfilter: require Ethernet MAC header before using eth_hdr() [ Upstream commit 62443dc21114c0bbc476fa62973db89743f2f137 ] `ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and `hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)` after either assuming that the skb is associated with an Ethernet device or checking only that the `ETH_HLEN` bytes at `skb_mac_header(skb)` lie between `skb->head` and `skb->data`. Make these paths first verify that the skb is associated with an Ethernet device, that the MAC header was set, and that it spans at least a full Ethernet header before accessing `eth_hdr(skb)`. Suggested-by: Florian Westphal Tested-by: Ren Wei Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 7b9a966cc0589c5486c5a0ded0c4f04384af805f Author: Sven Eckelmann Date: Sat May 16 12:33:41 2026 +0200 batman-adv: tp_meter: avoid role confusion in tp_list commit ff24f2ecfd94c07a2b89bac497433e3b23271cac upstream. Session lookups in tp_list matched only on destination address (and optionally session ID), leaving role validation to the caller. If two sessions with the same other_end coexisted (one as sender, one as receiver) a lookup could silently return the wrong one, causing the caller's role to bail out early, potentially skipping necessary cleanup. Move the role check into the lookup functions themselves so the correct entry is always returned, or none at all. Since batadv_tp_start() legitimately needs to detect any active session to a destination regardless of role, introduce a dedicated helper for that case rather than bending the existing lookup semantics. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit df9b095550050bfe84733604b951484f075d982a Author: Sven Eckelmann Date: Wed May 13 23:38:54 2026 +0200 batman-adv: tp_meter: fix race condition in send error reporting commit 71dce47f0758537fff78fddb5fb0d4632d29b29f upstream. batadv_tp_sender_shutdown() previously used two separate variables to track session state: sending (an atomic flag indicating whether the session was active) and reason (a plain enum storing the stop reason). This introduced a race window between the two writes: after sending was cleared to 0, batadv_tp_send() could observe the stopped state and call batadv_tp_sender_end() before reason was written, causing the wrong stop reason to be reported to the caller. Fix this by consolidating both variables into a single atomic send_result, which holds 0 while the session is running and the stop reason once it ends. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 5500ba1d410aed1eded3eb04a76b10cfb4409334 Author: Ali Ganiyev Date: Mon May 25 10:23:47 2026 +0900 ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops commit 0e60dafe97eca61721f3db456f97d97a80c6c8ae upstream. Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl(). Fixes: d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") Cc: stable@vger.kernel.org Signed-off-by: Ali Ganiyev Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit aa094e6ef513e1953e3e0426d4716f82a6692f88 Author: Luiz Augusto von Dentz Date: Tue Jun 2 16:48:34 2026 -0400 Bluetooth: MGMT: Fix backward compatibility with userspace commit 149324fc762c2a7acef9c26790566f81f475e51f upstream. bluetoothd has a bug with makes it send extra bytes as part of MGMT_OP_ADD_EXT_ADV_DATA which are now being checked to be the exact the expected length, relax this so only when the expected length is greater than the data length to cause an error since that would result in accessing invalid memory, otherwise just ignore the extra bytes. Link: https://lore.kernel.org/linux-bluetooth/20260602204749.210857-1-luiz.dentz@gmail.com/T/#u Fixes: d3f7d17960ed ("Bluetooth: MGMT: validate Add Extended Advertising Data length") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 2243ad78ce64d344754260533ae7730c2174a34a Author: Henri A Date: Wed May 20 10:25:44 2026 -0400 media: rc: igorplugusb: fix control request setup packet commit 171022c7d594c133a45f92357a2a91475edabe20 upstream. Commit eac69475b01f ("media: rc: igorplugusb: heed coherency rules") changed the control request storage from an embedded struct to an allocated pointer so it can obey DMA coherency rules. However, the driver still passes &ir->request to usb_fill_control_urb(). That points the URB setup packet at the pointer field itself rather than at the allocated struct usb_ctrlrequest. USB core then interprets pointer bytes as the setup packet. This can produce an invalid bRequestType and trigger the control direction warning reported by syzbot: usb 2-1: BOGUS control dir, pipe 80003580 doesn't match bRequestType 0 Pass ir->request itself as the setup packet. Fixes: eac69475b01f ("media: rc: igorplugusb: heed coherency rules") Reported-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=11f0e4f957c7c3bf3d51 Tested-by: syzbot+11f0e4f957c7c3bf3d51@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5.5 Signed-off-by: Henri A Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 7715c73f33260af724d734c41b794457e9be8dbc Author: Sven Eckelmann Date: Sun May 10 11:31:03 2026 +0200 batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown commit 77098e4bea37af51d3962efa88a5af2ea5e1ac57 upstream. The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty. Cc: stable@kernel.org Fixes: 3d3cf6a7314a ("batman-adv: stop tp_meter sessions during mesh teardown") Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit e0f0647985b22a1ef177142d0febd3a7bd7c752e Author: Oliver Neukum Date: Fri Apr 10 23:03:09 2026 +0200 media: rc: ttusbir: fix inverted error logic commit 646ebdd3105809d84ed04aa9e92e47e89cc44502 upstream. We have to report ENOMEM if no buffer is allocated. Typo dropped a "!". Restore it. Fixes: 50acaad3d202 ("media: rc: ttusbir: respect DMA coherency rules") Cc: stable@vger.kernel.org Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit d55b2c906170d04ce5019d5ede7421afd3362e60 Author: Borislav Petkov (AMD) Date: Wed Nov 1 11:28:31 2023 +0100 x86/CPU/AMD: Move the Zen3 BTC_NO detection to the Zen3 init function commit affc66cb96f865b3763a8e18add52e133d864f04 upstream. No functional changes. Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Nikolay Borisov Link: http://lore.kernel.org/r/20231120104152.13740-4-bp@alien8.de Stable-dep-of: 7c81ad8e8bc2 ("x86/CPU/AMD: Rename init_amd_zn() to init_amd_zen_common()") [bwh: Adjusted to apply after backports of the above commit which actually depended on this] Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 20bc319ad383ab33d5f4d84727d4e44d8a044742 Author: Ben Hutchings Date: Thu May 28 17:15:26 2026 +0200 apparmor: validate default DFA states are in bounds Some backports of commit 9063d7e2615f ("apparmor: validate DFA start states are in bounds in unpack_pdb") limited the bounds checks on DFA start states to the case where the start state was explicit in the policy. However, the default DFA start state (DFA_START = 1) could also be out-of-bounds. Move these checks out of the else-branches so that they are applied regardless of how the start state was initialised. Fixes: 5487871b2b56 ("apparmor: validate DFA start states are in bounds in unpack_pdb") Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit edd05afa418439feadcb759b750bd49f12cefb8b Author: Ben Hutchings Date: Thu May 28 14:59:37 2026 +0200 fbdev: vt8500lcdfb: Fix dma_free_coherent() cpu_addr parameter Before commit 63a11adaceb8 "fbdev/vt8500lcdfb: Initialize fb_ops with fbdev macros", the virtual address of the screen buffer was stored in the fb_info::screen_base field and not fb_info::screen_buffer. The backport of commit 88b3b9924337 ("fbdev: vt8500lcdfb: fix missing dma_free_coherent()") did not take that into account. Change the cpu_addr parameter to dma_free_coherent() accordingly. Fixes: 9c3873cccb3f ("fbdev: vt8500lcdfb: fix missing dma_free_coherent()") Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman commit 301a33fd590c408a05c5df800e0cc1e6a8a2f8f8 Author: Paolo Abeni Date: Tue Jun 16 08:19:47 2026 -0400 mptcp: close TOCTOU race while computing rcv_wnd [ Upstream commit 8ab24fdebc369c0dfb90f82c1650b1e66662bb45 ] The MPTCP output path access locklessly the MPTCP-level ack_seq in multiple times, using possibly different values for the data_ack in the DSS option and to compute the announced rcv wnd for the same packet. Refactor the cote to avoid inconsistencies which may confuse the peer. Also ensure that the MPTCP level rcv wnd is updated only when the egress packet actually contains a DSS ack. Fixes: fa3fe2b15031 ("mptcp: track window announced to peer") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-3-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6a26fd2e6b6fccb15f1aeb2056a84f46cba08e52 Author: Will Deacon Date: Tue Jun 16 06:23:07 2026 +0100 arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU commit 1940e70a8144bf75e6df26bf6f600862ea7f7ea1 upstream. Commit fb091ff39479 ("arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata") states that Microsoft Azure Cobalt 100 CPU "is a Microsoft implemented CPU based on r0p0 of the ARM Neoverse N2 CPU, and therefore suffers from all the same errata.". So enable the workaround for the latest broadcast TLB invalidation bug on these parts. Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman commit f040e78cde73c9363beec35514ea0242725402ef Author: Shanker Donthineni Date: Tue Jun 16 06:23:06 2026 +0100 arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU commit ec7216f92e4ebd485b1c6dc6aa3f6064b71a5768 upstream. NVIDIA Olympus cores are affected by the TLBI completion issue tracked as CVE-2025-10263. The existing ARM64_ERRATUM_4118414 handling already uses ARM64_WORKAROUND_REPEAT_TLBI to issue an additional broadcast TLBI;DSB sequence and ensure affected memory write effects are globally observed. Add MIDR_NVIDIA_OLYMPUS to the repeat-TLBI match list so the same mitigation is enabled on affected Olympus systems. Also document the NVIDIA Olympus erratum in the arm64 silicon errata table and list it in the Kconfig help text. Signed-off-by: Shanker Donthineni Cc: Catalin Marinas Cc: Will Deacon Cc: Mark Rutland Acked-by: Mark Rutland Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Shanker Donthineni Signed-off-by: Greg Kroah-Hartman commit 8364384ae82fbffdf8968abaac3455ed854da18d Author: Mark Rutland Date: Tue Jun 16 06:23:05 2026 +0100 arm64: errata: Mitigate TLBI errata on various Arm CPUs commit cfd391e74134db664feb499d43af286380b10ba8 upstream. A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman commit 521008bee0c5c6a1d7db31bc77f2b488b859958e Author: Mark Rutland Date: Tue Jun 16 06:23:04 2026 +0100 arm64: cputype: Add C1-Premium definitions commit d28413bfc5a255957241f1df5d7fd0c2cd74fe18 upstream. Add cputype definitions for C1-Premium. These will be used for errata detection in subsequent patches. These values can be found in the C1-Premium TRM: https://developer.arm.com/documentation/109416/0100/ ... in section A.5.1 ("MIDR_EL1, Main ID Register"). Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman commit 6bb606b134779251805f07433df85d8bd874dcfc Author: Mark Rutland Date: Tue Jun 16 06:23:03 2026 +0100 arm64: cputype: Add C1-Ultra definitions commit 60349e64a6c65f9f0aa118af711b3c7e137f07ff upstream. Add cputype definitions for C1-Ultra. These will be used for errata detection in subsequent patches. These values can be found in the C1-Ultra TRM: https://developer.arm.com/documentation/108014/0100/ ... in section A.5.1 ("MIDR_EL1, Main ID Register"). Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman commit 401fbd171e5e9c3ff3023bf5756c51689281025f Author: Shanker Donthineni Date: Tue Jun 16 06:23:02 2026 +0100 arm64: cputype: Add NVIDIA Olympus definitions commit e185c8a0d84236d14af61faff8147c953a878a77 upstream. Add cpu part and model macro definitions for NVIDIA Olympus core. Signed-off-by: Shanker Donthineni Signed-off-by: Will Deacon [Mark: backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman commit 74331684c50a4bd74a7a6e1e897bfecdd0a235a5 Author: Christian Göttsche Date: Tue Sep 28 17:39:31 2021 +0200 selinux: enable genfscon labeling for securityfs commit 8a764ef1bd43fb2bb4ff3290746e5c820a3a9716 upstream. Add support for genfscon per-file labeling of securityfs files. This allows for separate labels and thereby access control for different files. For example a genfscon statement genfscon securityfs /integrity/ima/policy \ system_u:object_r:ima_policy_t:s0 will set a private label to the IMA policy file and thus allow to control the ability to set the IMA policy. Setting labels directly with setxattr(2), e.g. by chcon(1) or setfiles(8), is still not supported. Signed-off-by: Christian Göttsche [PM: line width fixes in the commit description] Signed-off-by: Paul Moore Signed-off-by: Liem Signed-off-by: Greg Kroah-Hartman commit c2f5b2b8dd24c46e0fdbf64e025875cabf9be1cf Author: Aaron Erhardt Date: Wed Feb 18 22:32:10 2026 +0100 ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6 commit d649c58bcad8fb9b749e3837136a201632fa109d upstream. Depending on the timing during boot, the BIOS might report wrong pin capabilities, which can lead to HDMI audio being disabled. Therefore, force HDMI audio connection on TUXEDO InfinityBook S 14 Gen6. Signed-off-by: Aaron Erhardt Signed-off-by: Werner Sembach Link: https://patch.msgid.link/20260218213234.429686-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai Signed-off-by: Werner Sembach Signed-off-by: Greg Kroah-Hartman commit 2665887a69437a8a4f552f69509eecfb73d4aa19 Author: Jeff Layton Date: Tue Feb 24 11:33:35 2026 -0500 nfsd: fix heap overflow in NFSv4.0 LOCK replay cache commit 5133b61aaf437e5f25b1b396b14242a6bb0508e2 upstream. The NFSv4.0 replay cache uses a fixed 112-byte inline buffer (rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses. This size was calculated based on OPEN responses and does not account for LOCK denied responses, which include the conflicting lock owner as a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT). When a LOCK operation is denied due to a conflict with an existing lock that has a large owner, nfsd4_encode_operation() copies the full encoded response into the undersized replay buffer via read_bytes_from_xdr_buf() with no bounds check. This results in a slab-out-of-bounds write of up to 944 bytes past the end of the buffer, corrupting adjacent heap memory. This can be triggered remotely by an unauthenticated attacker with two cooperating NFSv4.0 clients: one sets a lock with a large owner string, then the other requests a conflicting lock to provoke the denial. We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full opaque, but that would increase the size of every stateowner, when most lockowners are not that large. Instead, fix this by checking the encoded response length against NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the response is too large, set rp_buflen to 0 to skip caching the replay payload. The status is still cached, and the client already received the correct response on the original request. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Nicholas Carlini Tested-by: Nicholas Carlini Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever [ replaced `op_status_offset + XDR_UNIT` with existing `post_err_offset` variable ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8a665d733940592e671ec6afadcd0be80a091a80 Author: Eric Biggers Date: Tue Feb 17 20:28:29 2026 -0800 ksmbd: Compare MACs in constant time commit c5794709bc9105935dbedef8b9cf9c06f2b559fa upstream. To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq(). Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit d3a1fb2ca323d7a4e10ab3afbfa25e6d8921e4f2 Author: Pengpeng Hou Date: Wed May 13 10:53:57 2026 +0800 net/ipv6: ioam6: prevent schema length wraparound in trace fill [ Upstream commit 5e67ba9bb531e1ec6599a82a065dea9040b9ce50 ] ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. Fixes: 8c6f6fa67726 ("ipv6: ioam: IOAM Generic Netlink API") Signed-off-by: Pengpeng Hou Reviewed-by: Justin Iurman Signed-off-by: David S. Miller Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman commit 78fe6844471dca939509dc71c5860921ad6ba73a Author: Sven Eckelmann Date: Wed May 6 22:20:49 2026 +0200 batman-adv: tp_meter: fix tp_num leak on kmalloc failure commit ce425dd05d0fe7594930a0fb103634f35ac47bb6 upstream. When batadv_tp_start() or batadv_tp_init_recv() fail to allocate a new tp_vars object, the previously incremented bat_priv->tp_num counter is never decremented. This causes tp_num to drift upward on each allocation failure. Since only BATADV_TP_MAX_NUM sessions can be started and the count is never reduced for these failed allocations, it causes to an exhaustion of throughput meter sessions. In worst case, no new throughput meter session can be started until the mesh interface is removed. The error handling must decrement tp_num releasing the lock and aborting the creation of an throughput meter session Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit 268078acae72daa12b17b2b299701cb9924e469a Author: Jiexun Wang Date: Mon Apr 27 14:43:34 2026 +0800 batman-adv: stop tp_meter sessions during mesh teardown commit 3d3cf6a7314aca4df0a6dde28ce784a2a30d0166 upstream. TP meter sessions remain linked on bat_priv->tp_list after the netlink request has already finished. When the mesh interface is removed, batadv_mesh_free() currently tears down the mesh without first draining these sessions. A running sender thread or a late incoming tp_meter packet can then keep processing against a mesh instance which is already shutting down. Synchronize tp_meter with the mesh lifetime by stopping all active sessions from batadv_mesh_free() and waiting for sender threads to exit before teardown continues. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Greg Kroah-Hartman commit da6cc648c1f570290af1ddbe6b7ca3d91b1d6db9 Author: Tejun Heo Date: Wed Aug 16 09:56:23 2023 -1000 blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init commit ec14a87ee1999b19d8b7ed0fa95fea80644624ae upstream. blk-iocost sometimes causes the following crash: BUG: kernel NULL pointer dereference, address: 00000000000000e0 ... RIP: 0010:_raw_spin_lock+0x17/0x30 Code: be 01 02 00 00 e8 79 38 39 ff 31 d2 89 d0 5d c3 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 65 ff 05 48 d0 34 7e b9 01 00 00 00 31 c0 0f b1 0f 75 02 5d c3 89 c6 e8 ea 04 00 00 5d c3 0f 1f 84 00 00 RSP: 0018:ffffc900023b3d40 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000000000e0 RCX: 0000000000000001 RDX: ffffc900023b3d20 RSI: ffffc900023b3cf0 RDI: 00000000000000e0 RBP: ffffc900023b3d40 R08: ffffc900023b3c10 R09: 0000000000000003 R10: 0000000000000064 R11: 000000000000000a R12: ffff888102337000 R13: fffffffffffffff2 R14: ffff88810af408c8 R15: ffff8881070c3600 FS: 00007faaaf364fc0(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001097b1000 CR4: 0000000000350ea0 Call Trace: ioc_weight_write+0x13d/0x410 cgroup_file_write+0x7a/0x130 kernfs_fop_write_iter+0xf5/0x170 vfs_write+0x298/0x370 ksys_write+0x5f/0xb0 __x64_sys_write+0x1b/0x20 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This happens because iocg->ioc is NULL. The field is initialized by ioc_pd_init() and never cleared. The NULL deref is caused by blkcg_activate_policy() installing blkg_policy_data before initializing it. blkcg_activate_policy() was doing the following: 1. Allocate pd's for all existing blkg's and install them in blkg->pd[]. 2. Initialize all pd's. 3. Online all pd's. blkcg_activate_policy() only grabs the queue_lock and may release and re-acquire the lock as allocation may need to sleep. ioc_weight_write() grabs blkcg->lock and iterates all its blkg's. The two can race and if ioc_weight_write() runs during #1 or between #1 and #2, it can encounter a pd which is not initialized yet, leading to crash. The crash can be reproduced with the following script: #!/bin/bash echo +io > /sys/fs/cgroup/cgroup.subtree_control systemd-run --unit touch-sda --scope dd if=/dev/sda of=/dev/null bs=1M count=1 iflag=direct echo 100 > /sys/fs/cgroup/system.slice/io.weight bash -c "echo '8:0 enable=1' > /sys/fs/cgroup/io.cost.qos" & sleep .2 echo 100 > /sys/fs/cgroup/system.slice/io.weight with the following patch applied: > diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c > index fc49be622e05..38d671d5e10c 100644 > --- a/block/blk-cgroup.c > +++ b/block/blk-cgroup.c > @@ -1553,6 +1553,12 @@ int blkcg_activate_policy(struct gendisk *disk, const struct blkcg_policy *pol) > pd->online = false; > } > > + if (system_state == SYSTEM_RUNNING) { > + spin_unlock_irq(&q->queue_lock); > + ssleep(1); > + spin_lock_irq(&q->queue_lock); > + } > + > /* all allocated, init in the same order */ > if (pol->pd_init_fn) > list_for_each_entry_reverse(blkg, &q->blkg_list, q_node) I don't see a reason why all pd's should be allocated, initialized and onlined together. The only ordering requirement is that parent blkgs to be initialized and onlined before children, which is guaranteed from the walking order. Let's fix the bug by allocating, initializing and onlining pd for each blkg and holding blkcg->lock over initialization and onlining. This ensures that an installed blkg is always fully initialized and onlined removing the the race window. Signed-off-by: Tejun Heo Reported-by: Breno Leitao Fixes: 9d179b865449 ("blkcg: Fix multiple bugs in blkcg_activate_policy()") Link: https://lore.kernel.org/r/ZN0p5_W-Q9mAHBVY@slm.duckdns.org Signed-off-by: Jens Axboe Signed-off-by: Robert Garcia Signed-off-by: Greg Kroah-Hartman commit 54add3b7d3c154ca89ef5bac2582b0ed1a3a15d5 Author: Julian Anastasov Date: Sat Feb 14 16:58:49 2026 +0200 ipvs: skip ipv6 extension headers for csum checks commit 05cfe9863ef049d98141dc2969eefde72fb07625 upstream. Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem. Fixes: 2906f66a5682 ("ipvs: SCTP Trasport Loadbalancing Support") Fixes: 0bbdd42b7efa ("IPVS: Extend protocol DNAT/SNAT and state handlers") Signed-off-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Nazar Kalashnikov Signed-off-by: Greg Kroah-Hartman commit 108963978a681c0c468d279cac2b930c27672877 Author: Yin Tirui Date: Mon Jun 15 21:35:03 2026 -0400 mm/huge_memory: update file PMD counter before folio_put() [ Upstream commit 8d878059924f12c1bc24556a92ec56add74de3c8 ] __split_huge_pmd_locked() updates the file/shmem RSS counter after dropping the PMD mapping's folio reference. If folio_put() drops the last reference, mm_counter_file() can later read freed folio state via folio_test_swapbacked(). Move the counter update before folio_put(). Link: https://lore.kernel.org/20260526101337.1984081-1-yintirui@huawei.com Fixes: fadae2953072 ("thp: use mm_file_counter to determine update which rss counter") Signed-off-by: Yin Tirui Reviewed-by: Lorenzo Stoakes Acked-by: David Hildenbrand (arm) Reviewed-by: Lance Yang Reviewed-by: Dev Jain Cc: Baolin Wang Cc: Barry Song Cc: Chen Jun Cc: Kefeng Wang Cc: Liam R. Howlett Cc: Nico Pache Cc: Ryan Roberts Cc: Vlastimil Babka Cc: Yang Shi Cc: Zi Yan Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dee2a49adeeb2a5e16a3fc858fa21b841c519802 Author: Jason Gunthorpe Date: Mon Jun 15 21:07:38 2026 -0400 RDMA/umem: Fix truncation for block sizes >= 4G [ Upstream commit 15fe76e23615f502d051ef0768f86babaf08746c ] When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses. Link: https://patch.msgid.link/r/1-v1-88303e9e509f+f7-ib_umem_types_jgg@nvidia.com Cc: stable@vger.kernel.org Fixes: a808273a495c ("RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks") Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0493cef034110970d619021cf4d9960a8cabc981 Author: Leon Romanovsky Date: Mon Jun 15 21:07:37 2026 -0400 RDMA: Move DMA block iterator logic into dedicated files [ Upstream commit 6094ea64c69520ed1e770e7c79c43412de202bfa ] The DMA iterator logic was mixed into verbs and umem-specific code, forcing all users to include rdma/ib_umem.h. Move the block iterator logic into iter.c and rdma/iter.h so that rdma/ib_umem.h and rdma/ib_verbs.h can be separated in a follow-up patch. Link: https://patch.msgid.link/20260213-refactor-umem-v1-1-f3be85847922@nvidia.com Signed-off-by: Leon Romanovsky Stable-dep-of: 15fe76e23615 ("RDMA/umem: Fix truncation for block sizes >= 4G") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 806e620a8690750fe9baebf5ac35db1b0f1a58cc Author: Randy Dunlap Date: Mon Jun 15 21:07:36 2026 -0400 RDMA/umem: fix kernel-doc warnings [ Upstream commit ff46d1392750444fab5ae5a0194764ffdc4ac0d2 ] Add or correct kernel-doc comments to eliminate warnings: Warning: include/rdma/ib_umem.h:104 function parameter 'biter' not described in 'rdma_umem_for_each_dma_block' Warning: include/rdma/ib_umem.h:140 function parameter 'pgsz_bitmap' not described in 'ib_umem_find_best_pgoff' Warning: include/rdma/ib_umem.h:141 No description found for return value of 'ib_umem_find_best_pgoff' Signed-off-by: Randy Dunlap Link: https://patch.msgid.link/20260224003120.3173892-1-rdunlap@infradead.org Signed-off-by: Leon Romanovsky Stable-dep-of: 15fe76e23615 ("RDMA/umem: Fix truncation for block sizes >= 4G") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a82d4251918f37d9c5aab7b365157669fb885ec3 Author: Anton Leontev Date: Mon Jun 15 14:16:57 2026 -0400 hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf [ Upstream commit 004e9ecfe6c5384f9e0b2f6f6389d42ec22789af ] netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. Fixes: c25aaf814a63 ("hyperv: Enable sendbuf mechanism on the send path") Cc: stable@vger.kernel.org Signed-off-by: Anton Leontev Link: https://patch.msgid.link/20260604165938.32033-1-leontyevantony@gmail.com Signed-off-by: Paolo Abeni [ adapted `phys_to_page(paddr)` to `pfn_to_page(PHYS_PFN(paddr))` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit eca18feed38b3377a2ec5d1f22af1170c55d0171 Author: Davide Ornaghi Date: Mon Jun 15 13:37:18 2026 -0400 netfilter: nft_fib: fix stale stack leak via the OIFNAME register [ Upstream commit ab185e0c4fb82dfba6fb86f8271e06f931d9c64c ] For NFT_FIB_RESULT_OIFNAME the destination register is declared with len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail, RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one register via "*dest = 0". The remaining three registers are left as whatever was on the stack in nft_do_chain()'s struct nft_regs, and a downstream expression that loads the register span can leak that uninitialised kernel stack to userspace. The NFTA_FIB_F_PRESENT existence check has the same shape: it is only meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type while the eval stores a single byte via nft_reg_store8(), leaving the rest of the declared span stale. Fix both: - replace the bare "*dest = 0" in the eval with nft_fib_store_result(), which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already used on the other early-return path), and - restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its destination as a single u8, so the marked span matches the one byte the eval writes. Fixes: f6d0cbcf09c5 ("netfilter: nf_tables: add fib expression") Suggested-by: Florian Westphal Cc: stable@vger.kernel.org Signed-off-by: Davide Ornaghi Signed-off-by: Pablo Neira Ayuso [ kept the tree's existing `ip6_route_lookup`/`rt6_info` machinery (missing `fib6_lookup` refactor) and changed only `*dest = 0;` to `nft_fib_store_result(dest, priv, NULL)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit badf178b76b0690851df00f4ca9cf2eb8eb0f963 Author: Michael Bommarito Date: Sat Jun 6 08:49:28 2026 -0400 scsi: target: iscsi: Fix CRC overread and double-free in iscsit_handle_text_cmd() [ Upstream commit 778c2ab142c625a8a8afa570e0f9b7873f445d99 ] Two latent bugs in the Text-phase handler, both present since the original LIO integration in commit e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1"): 1) DataDigest CRC buffer overread (4 bytes past text_in). text_in is kzalloc()'d at ALIGN(payload_length, 4). rx_size is then incremented by ISCSI_CRC_LEN to make room for the received DataDigest in the iovec, but the same (now-bumped) rx_size is passed as the buffer length to iscsit_crc_buf(): if (conn->conn_ops->DataDigest) { ... rx_size += ISCSI_CRC_LEN; } ... if (conn->conn_ops->DataDigest) { data_crc = iscsit_crc_buf(text_in, rx_size, 0, NULL); iscsit_crc_buf() walks rx_size bytes of text_in with crc32c(), so when DataDigest is negotiated it reads 4 bytes past the end of the text_in allocation. KASAN reproduces this directly on the unpatched mainline tree as slab-out-of-bounds in crc32c() called from the Text PDU path. The OOB bytes feed crc32c() and are then compared against the initiator-supplied checksum, so the value does not flow back to the attacker, but the kernel does read past the buffer on every Text PDU with DataDigest=CRC32C. Fix by passing the actual padded payload length (ALIGN(payload_length, 4)) that was used for the kzalloc(). 2) Stale cmd->text_in_ptr re-free (double-free) on ERL>0 bad DataDigest drop. On DataDigest mismatch with ErrorRecoveryLevel > 0 the handler silently drops the PDU and lets the initiator plug the CmdSN gap: kfree(text_in); return 0; cmd->text_in_ptr still points at the freed buffer. The next Text Request on the same ITT re-enters iscsit_setup_text_cmd(), which unconditionally does kfree(cmd->text_in_ptr); cmd->text_in_ptr = NULL; freeing the same pointer a second time. Session teardown via iscsit_release_cmd() has the same shape and hits the same double-free if the connection is dropped before a second Text Request arrives. On an unmodified mainline tree the bug-1 CRC overread fires first on the initial valid Text Request and perturbs the subsequent state, so #4 was isolated by building a kernel with only the bug-1 hunk of this patch applied plus temporary printk() observability around the three relevant kfree() sites. The observability prints are not part of this patch. On that build, a three-PDU Text Request sequence after login produces two back-to-back splats: BUG: KASAN: double-free in iscsit_setup_text_cmd+0x?? BUG: KASAN: double-free in iscsit_release_cmd+0x?? showing the same pointer freed in the ERL>0 drop path and again in iscsit_setup_text_cmd() (next Text Request on the same ITT) and once more in iscsit_release_cmd() (session teardown). On distro kernels with CONFIG_SLAB_FREELIST_HARDENED=y (default) the double-free becomes a remote kernel BUG(); on non-hardened kernels it corrupts the slab freelist. Fix by clearing cmd->text_in_ptr after the kfree() in the ERL>0 drop path. With both hunks applied #4 is directly observable on the stock tree without observability printks; fixing bug-1 alone would mask #4 less, not more, so the hunks are submitted together. Both fixes are one-liners. The Text PDU state machine is unchanged and the wire protocol is unaffected. Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Tested-by: John Garry Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9bb6ec4e32c2aa913cdb30be5a4bcc752f27a78b Author: Prasanna S Date: Sat Jun 6 08:18:54 2026 -0400 serial: qcom-geni: fix UART_RX_PAR_EN bit position [ Upstream commit ca2584d841b69391ffc4144840563d2e1a0018df ] UART_RX_PAR_EN is incorrectly defined as bit 3, which triggers false framing errors (S_GP_IRQ_1_EN) and causes received data to be dropped when parity is enabled and the parity bit is 0. Define UART_RX_PAR_EN as bit 4 of the SE_UART_RX_TRANS_CFG register, as specified in the reference manual. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable Signed-off-by: Prasanna S Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260428-serial-bit-correct-v1-1-9131ad5b97d8@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ef082969e2c3448540a6915fd732f233a76af237 Author: Bartosz Golaszewski Date: Sat Jun 6 08:18:53 2026 -0400 tty: serial: qcom-geni-serial: align #define values [ Upstream commit 6cde11dbf4b65170eeefba48df730c93d75e01a3 ] Keep the #define symbols aligned for better readability. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20221229155030.418800-5-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ca2584d841b6 ("serial: qcom-geni: fix UART_RX_PAR_EN bit position") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit abf959334379eff9b2050724c18f4d6dafe11ed6 Author: Bartosz Golaszewski Date: Sat Jun 6 08:18:52 2026 -0400 tty: serial: qcom-geni-serial: remove unused symbols [ Upstream commit 68c6bd92c86cbc4937834c79963b27c77ee3bf51 ] Drop all unused symbols from the driver. Signed-off-by: Bartosz Golaszewski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20221229155030.418800-4-brgl@bgdev.pl Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ca2584d841b6 ("serial: qcom-geni: fix UART_RX_PAR_EN bit position") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d10085481cd351b7d172a23f5f878e63ee48db12 Author: Myeonghun Pak Date: Sat Jun 6 08:18:43 2026 -0400 serial: altera_jtaguart: handle uart_add_one_port() failures [ Upstream commit ea66be25f0e934f49d24cd0c5845d13cdba3520b ] altera_jtaguart_probe() maps the register window before registering the UART port, but it ignores failures from uart_add_one_port(). If port registration fails, probe still returns success and the mapping remains live until a later remove path that is not part of probe failure cleanup. Return the uart_add_one_port() error and unmap the register window on that failure path. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: 5bcd601049c6 ("serial: Add driver for the Altera JTAG UART") Cc: stable Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Link: https://patch.msgid.link/20260512065837.79528-1-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c575130a13420bb275c921027b9e45882f2e6e9e Author: Lad Prabhakar Date: Sat Jun 6 08:18:42 2026 -0400 serial: altera_jtaguart: Use platform_get_irq_optional() to get the interrupt [ Upstream commit 60302276caff50f907bc3391a364691ab4a21b43 ] platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_optional(). Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/20211224142917.6966-7-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: ea66be25f0e9 ("serial: altera_jtaguart: handle uart_add_one_port() failures") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 96f7de3172d4aa878b7f87173b2b3507c350fcd6 Author: Berkant Koc Date: Fri Jun 5 22:19:01 2026 -0400 drm/hyperv: validate resolution_count and fix WIN8 fallback [ Upstream commit 13d33b9ef67066c77c84273fac5a1d3fde3533d1 ] A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the parse loop. Bound resolution_count against the array size, folded into the existing zero-check. When the WIN10 resolution probe fails, the caller in hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated, which sets mode_config.max_width / max_height to 0 and makes drm_internal_framebuffer_create() reject every userspace framebuffer with -EINVAL. The pre-WIN10 branch had the same gap for preferred_width / preferred_height. Use a single post-probe fallback guarded by screen_width_max == 0 so both paths converge on the WIN8 defaults. Signed-off-by: Berkant Koc Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Cc: stable@vger.kernel.org # 5.14+ Reviewed-by: Michael Kelley Tested-by: Michael Kelley Signed-off-by: Hamza Mahfooz Link: https://patch.msgid.link/6945b22419c7d404b4954a113de2ac9c900dba93.1779542874.git.me@berkoc.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c3edc162a39c80738f9d3128fcd4078ade02c039 Author: Michael Kelley Date: Fri Jun 5 22:19:00 2026 -0400 drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7 [ Upstream commit ac6811a9b36f3ceb549d8b84bd8aeedf6026df02 ] The DRM Hyper-V driver has special case code for running on the first released versions of Hyper-V: 2008 and 2008 R2/Windows 7. These versions are now out of support (except for extended security updates) and lack support for performance features that are needed for effective production usage of Linux guests. The negotiation of the VMbus protocol versions required by these old Hyper-V versions has been removed from the VMbus driver. So now remove the handling of these VMbus protocol versions from the DRM Hyper-V driver. Signed-off-by: Michael Kelley Reviewed-by: Deepak Rawat Reviewed-by: Andrea Parri (Microsoft) Link: https://lore.kernel.org/r/1651509391-2058-5-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu Stable-dep-of: 13d33b9ef670 ("drm/hyperv: validate resolution_count and fix WIN8 fallback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3907130abbb7d9afc68210b5b2bee736b2d9bb2e Author: Myrrh Periwinkle Date: Fri Jun 5 16:34:10 2026 -0400 usb: typec: ucsi: Check if power role change actually happened before handling [ Upstream commit b80e7d34c7ea6a564525119d6138fbb577a23dba ] The CrOS EC may send a connector status change event with the power direction changed flag set even if the power direction hasn't actually changed after initiating a SET_PDR command internally [1]. In practice this happens on every system suspend due to other changes performed by the EC [2][3][4], causing suspend to fail. Fix this by checking if the power role change actually happened before handling it. [1]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=1689;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794 [2]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=3923;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794 [3]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=5094;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794 [4]: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/ec/zephyr/subsys/pd_controller/pdc_power_mgmt.c;l=2229;drc=2d5a1cffce4e5ac8a39442cb3b764d2d5e1cf794 Cc: stable Fixes: 7616f006db07 ("usb: typec: ucsi: Update power_supply on power role change") Signed-off-by: Myrrh Periwinkle Reported-and-tested-by: Sergey Senozhatsky Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260519-ucsi-fix-2-v1-1-6f1239535187@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b19382dfc6e7dee6d3859ba44b6ca29e97a51627 Author: Michael Bommarito Date: Fri Jun 5 16:34:05 2026 -0400 scsi: target: iscsi: Bound iscsi_encode_text_output() appends to rsp_buf [ Upstream commit bf33e01f88388c43e285492a63e539df6ffed64c ] iscsi_encode_text_output() concatenates "key=value\0" records into login->rsp_buf, an 8192-byte kzalloc(MAX_KEY_VALUE_PAIRS) buffer allocated in iscsit_alloc_login_setup_buffer(). The three sprintf() call sites in this function (lines 1398, 1411, 1424 in v7.1-rc2) never check the remaining buffer capacity: *length += sprintf(output_buf, "%s=%s", er->key, er->value); *length += 1; output_buf = textbuf + *length; The 8192-byte ceiling at iscsi_target_check_login_request() bounds the *input* Login PDU payload, but a single PDU can carry up to 2048 minimal four-byte "a=b\0" pairs, each unknown key expanding to a 16-byte "a=NotUnderstood\0" output record via iscsi_add_notunderstood_response(). 2048 * 16 = 32 KiB of output into an 8 KiB buffer, producing a ~24 KiB heap overrun in the kmalloc-8k slab. The fix introduces a static iscsi_encode_text_record() helper that uses snprintf() with a per-call bounds check against the remaining buffer, and threads a u32 textbuf_size parameter through iscsi_encode_text_output(). Both call sites in iscsi_target_handle_csg_zero() (PHASE_SECURITY) and iscsi_target_handle_csg_one() (PHASE_OPERATIONAL) pass MAX_KEY_VALUE_PAIRS. On overflow the encoder logs the condition, calls iscsi_release_extra_responses() to drop queued records, and returns -1; both caller sites now emit ISCSI_STATUS_CLS_INITIATOR_ERR / ISCSI_LOGIN_STATUS_INIT_ERR via iscsit_tx_login_rsp() before returning, so the initiator sees an explicit failed-login response rather than a silent connection drop. (Prior to this patch only the PHASE_OPERATIONAL caller did that; the PHASE_SECURITY caller is converted to the same shape.) Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Tested-by: John Garry Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 95839a67ea56ca35732aad7f711404a3127cfe2d Author: Michael Bommarito Date: Fri Jun 5 16:34:00 2026 -0400 thunderbolt: property: Cap recursion depth in __tb_property_parse_dir() [ Upstream commit 928abe19fbf0127003abcb1ea69cabc1c897d0ab ] A DIRECTORY entry's value field is used as the dir_offset for a recursive call into __tb_property_parse_dir() with no depth counter. A crafted peer that chains DIRECTORY entries into a back-reference loop drives the parser until the kernel stack is exhausted and the guard page fires. Any untrusted XDomain peer (cable, dock, in-line inspector, adjacent host) that reaches the PROPERTIES_REQUEST control-plane exchange can trigger this without authentication. Thread a depth counter through tb_property_parse() and __tb_property_parse_dir(), and reject blocks that exceed TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any observed legitimate XDomain layout. Operators who do not need XDomain host-to-host discovery can disable the path entirely with thunderbolt.xdomain=0 on the kernel command line. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2da2bf68cdaaa7a6a37e41e0112080c8400ff135 Author: Guangshuo Li Date: Fri Jun 5 15:38:26 2026 -0400 usb: gadget: f_hid: fix device reference leak in hidg_alloc() [ Upstream commit 4f88d65def6f3c90121601b4f62a4c967f3063a6 ] hidg_alloc() initializes hidg->dev with device_initialize() before calling dev_set_name(). If dev_set_name() fails, the function currently jumps to err_unlock and returns without calling put_device(). This leaves the device reference unbalanced and prevents hidg_release() from being called. Calling put_device() here is also safe, since hidg_release() only frees resources owned by hidg. The issue was identified by a static analysis tool I developed and confirmed by manual review. Route the dev_set_name() failure path through err_put_device so the device reference is dropped properly. Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev") Cc: stable Reviewed-by: Johan Hovold Signed-off-by: Guangshuo Li Reviewed-by: Johan Hovold johan@kernel.org Link: https://patch.msgid.link/20260413142119.2977716-1-lgs201920130244@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 54e73e1e5d20656e73a7b00ae39eb231d23c288a Author: John Keeping Date: Fri Jun 5 15:38:25 2026 -0400 usb: gadget: f_hid: tidy error handling in hidg_alloc [ Upstream commit 944fe915d00d3cb1bacb1e77cabfb6dc82e6f8b8 ] Unify error handling at the end of the function, reducing the risk of missing something on one of the error paths. Moving the increment of opts->refcnt later means there is no need to decrement it on the error path and is safe as this is guarded by opts->lock which is held for this entire section. Tested-by: Lee Jones Reviewed-by: Andrzej Pietrasiewicz Reviewed-by: Lee Jones Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20221122123523.3068034-4-john@metanate.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 4f88d65def6f ("usb: gadget: f_hid: fix device reference leak in hidg_alloc()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 96fc71f3dac1abe6374bf69468984670956d967c Author: Radhey Shyam Pandey Date: Fri Jun 5 15:17:01 2026 -0400 usb: dwc3: xilinx: fix error handling in zynqmp init error paths [ Upstream commit c1a0ecbf32c4b397353204e2ec94c5bb9f3300ed ] Fix error handling and resource cleanup i.e remove invalid phy_exit() after failed phy_init(), route failures through proper cleanup paths and return 0 explicitly on success. Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen Signed-off-by: Radhey Shyam Pandey Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 10014eb7eee351f7b587f8ac85830f0c9343cb9a Author: Tudor Ambarus Date: Fri Jun 5 14:31:15 2026 -0400 tty: serial: samsung: Remove redundant port lock acquisition in rx helpers [ Upstream commit a3bb136bff5e6a5e48cdd813246c9c4686feaaa9 ] Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions. Cc: stable Fixes: b497549a035c ("[ARM] S3C24XX: Split serial driver into core and per-cpu drivers") Reported-by: John Ogness Closes: https://sashiko.dev/#/patchset/20260506121606.5805-1-john.ogness%40linutronix.de [1] Signed-off-by: Tudor Ambarus Link: https://patch.msgid.link/20260515-samsung-tty-flow-control-deadlock-v1-1-93255edbc9bc@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 96873527fc5fb1bb7b3280bfea89fe40551bbaa2 Author: Tudor Ambarus Date: Fri Jun 5 14:31:14 2026 -0400 tty: serial: samsung: use u32 for register interactions [ Upstream commit 032a725c16add79332d774348d7ad7d0d4b86479 ] All registers of the IP have 32 bits. Use u32 variables when reading or writing from/to the registers. The purpose of those variables becomes clearer. Reviewed-by: Sam Protsenko Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20240119104526.1221243-9-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: a3bb136bff5e ("tty: serial: samsung: Remove redundant port lock acquisition in rx helpers") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cf72e08d491364e771b97142fddc5bd6d6440616 Author: Thomas Gleixner Date: Fri Jun 5 14:31:13 2026 -0400 serial: samsung_tty: Use port lock wrappers [ Upstream commit 97d7a9aeba1d424c2359f1686d02c75d798ad184 ] When a serial port is used for kernel console output, then all modifications to the UART registers which are done from other contexts, e.g. getty, termios, are interference points for the kernel console. So far this has been ignored and the printk output is based on the principle of hope. The rework of the console infrastructure which aims to support threaded and atomic consoles, requires to mark sections which modify the UART registers as unsafe. This allows the atomic write function to make informed decisions and eventually to restore operational state. It also allows to prevent the regular UART code from modifying UART registers while printk output is in progress. All modifications of UART registers are guarded by the UART port lock, which provides an obvious synchronization point with the console infrastructure. To avoid adding this functionality to all UART drivers, wrap the spin_[un]lock*() invocations for uart_port::lock into helper functions which just contain the spin_[un]lock*() invocations for now. In a subsequent step these helpers will gain the console synchronization mechanisms. Converted with coccinelle. No functional change. Signed-off-by: Thomas Gleixner Signed-off-by: John Ogness Link: https://lore.kernel.org/r/20230914183831.587273-54-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman Stable-dep-of: a3bb136bff5e ("tty: serial: samsung: Remove redundant port lock acquisition in rx helpers") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9b40bdc2a3298225dffab8158208a0d8c6300578 Author: Minh Nguyen Date: Fri Jun 5 09:57:38 2026 -0400 net: skbuff: fix missing zerocopy reference in pskb_carve helpers [ Upstream commit 98d0912e9f841e5529a5b89a972805f34cb1c69d ] pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put(). Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-sonnet-4-6 Signed-off-by: Minh Nguyen Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260526041240.329462-1-minhnguyen.080505@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9391e94726870f849ad39258523fff30f5a934d1 Author: Peter Chen Date: Fri Jun 5 09:05:37 2026 -0400 usb: cdns3: plat: fix leaked usb2_phy initialization on usb3_phy acquisition failure [ Upstream commit e6970cda63fd4b4546aeed9d0e2f53a7c95cd09c ] Move usb2_phy initialization after usb3_phy acquisition. Fixes: f738957277ba ("usb: cdns3: Split core.c into cdns3-plat and core.c file") Cc: stable Reported-by: sashiko-bot Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52 Signed-off-by: Peter Chen Link: https://patch.msgid.link/20260513085310.2217547-2-peter.chen@cixtech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 664b13498fe9b5cede4350e982661fdea4e693b3 Author: Rodrigo Alencar Date: Thu Jun 4 21:31:12 2026 -0400 iio: dac: ad5686: fix ref bit initialization for single-channel parts [ Upstream commit ecae2ae606d493cf11457946436335bd0e726663 ] The reference bit position was ignored when writing the register at the probe() function (!!val was used). When such bit is 1, internal voltage reference is disabled so that an external one can be used. For multi-channel devices, bit 0 of the Internal Reference Setup command behaves the same way, so AD5686_REF_BIT_MSK is created. The issue exists since support for single-channel devices were first introduced. Fixes: be1b24d24541 ("iio:dac:ad5686: Add AD5691R/AD5692R/AD5693/AD5693R support") Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Cc: Signed-off-by: Jonathan Cameron [ adapted `has_external_vref` to the in-tree equivalent `voltage_uv` variable in the `val =` computation ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6308b812acdcac38cbfe1af0b1524c3375f408a5 Author: Antoniu Miclaus Date: Thu Jun 4 15:40:17 2026 -0400 iio: chemical: scd30: fix division by zero in write_raw [ Upstream commit 5aba4f94b225617a55fed442a70329b2ee19c0a5 ] Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Fixes: 64b3d8b1b0f5 ("iio: chemical: scd30: add core driver") Signed-off-by: Antoniu Miclaus Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ac12ecbc8aed7e8d28ef458ec15565b7733ca5f4 Author: Jonathan Cameron Date: Thu Jun 4 15:40:16 2026 -0400 iio: chemical: scd30: Use guard(mutex) to allow early returns [ Upstream commit 5feb5532870fbced5d6f450b8061a33f461b88ca ] Auto cleanup based release of the lock allows for simpler code flow in a few functions with large multiplexing style switch statements and no common operations following the switch. Suggested-by: David Lechner Cc: Tomasz Duszynski Reviewed-by: David Lechner Link: https://patch.msgid.link/20250209180624.701140-3-jic23@kernel.org Signed-off-by: Jonathan Cameron Stable-dep-of: 5aba4f94b225 ("iio: chemical: scd30: fix division by zero in write_raw") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 19eb8565c4500f9af17ec65eaf952365e2893351 Author: Antoniu Miclaus Date: Thu Jun 4 15:17:52 2026 -0400 iio: gyro: adis16260: fix division by zero in write_raw [ Upstream commit 761e8b489e6cf166c574034b70637f8a7eadd0ee ] Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Fixes: 089a41985c6c ("staging: iio: adis16260 digital gyro driver") Signed-off-by: Antoniu Miclaus Reviewed-by: Nuno Sá Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e1c100e2d61bd8c718b7d91fe3e050780a9bf72d Author: Siwei Zhang Date: Thu Jun 4 09:37:26 2026 -0400 Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() [ Upstream commit 8c8e620467a7b51562dbcefbd1f09f288d7d710d ] l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared. Fixes: 3df91ea20e74 ("Bluetooth: Revert to mutexes from RCU list") Cc: # 0b58004: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() Signed-off-by: Siwei Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ed9297ad5ead085955e1997720fce030f68371f6 Author: Wayne Chang Date: Mon Jun 1 07:02:18 2026 -0400 phy: tegra: xusb: Fix per-pad high-speed termination calibration [ Upstream commit da110228b54f2e2143d97ea7151e0dc22e539d67 ] The existing code reads a single hs_term_range_adj value from bit field [10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly. However, on SoCs that support per-pad termination, each pad has its own hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3 in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13] respectively. Fix the calibration by reading per-pad values from the appropriate fuse registers. For SoCs that do not support per-pad termination, replicate pad 0's value to all pads to maintain existing behavior. Add a has_per_pad_term flag to the SoC data to indicate whether per-pad termination values are available in FUSE_USB_CALIB_EXT_0. Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Signed-off-by: Wei-Cheng Chen Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 60b699e5508c5c24622dd4964c564996f7c119c9 Author: Wayne Chang Date: Mon Jun 1 07:02:17 2026 -0400 phy: tegra: xusb: Disable trk clk when not in use [ Upstream commit 71d9e899584e11bbd7eaf9934a619c69a15060d8 ] Pad tracking is a one-time calibration for Tegra186 and Tegra194. Clk should be disabled after calibration. Disable clk after calibration. While at it add 100us delay for HW recording the calibration value. Signed-off-by: Wayne Chang Signed-off-by: Jon Hunter Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: da110228b54f ("phy: tegra: xusb: Fix per-pad high-speed termination calibration") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 47490bbb05c8c0e09cc3cfd237d8934ffc340583 Author: Zeng Heng Date: Mon Jun 1 06:51:16 2026 -0400 arm64: tlb: Flush walk cache when unsharing PMD tables [ Upstream commit c2ff4764e03e7a8d758352f4aceb8fe1be6ac971 ] When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | Signed-off-by: Zeng Heng Fixes: 8ce720d5bd91 ("mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather") Cc: Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d577c55d189e7ae150973058d13e299b6855633f Author: Johan Hovold Date: Sun May 31 21:51:42 2026 -0400 spi: qup: fix error pointer deref after DMA setup failure [ Upstream commit a7e8f3efd50a165ba0189f6dc57f7e51a7d149db ] The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=4 Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074334.914735-1-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e0f43aceef40147d41176dfac5f4f12220977244 Author: Yang Yingliang Date: Sun May 31 21:51:41 2026 -0400 spi: qup: switch to use modern name [ Upstream commit 597442ff4f6226206b7cc28b86eb2be0ae9c6418 ] Change legacy name master to modern name host or controller. No functional changed. Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20230818093154.1183529-10-yangyingliang@huawei.com Signed-off-by: Mark Brown Stable-dep-of: a7e8f3efd50a ("spi: qup: fix error pointer deref after DMA setup failure") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b92e7ea408b6f1144648909c9c49a55d245d7300 Author: Dawei Feng Date: Sat May 30 16:13:27 2026 -0400 octeontx2-pf: avoid double free of pool->stack on AQ init failure [ Upstream commit 9b244c242bec48b37e82b89787afd6a4c43457e1 ] otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues") Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 985b5e38ac4f4d5ff03c8bfd8484353b440a1579 Author: Sam Daly Date: Sat May 30 16:07:39 2026 -0400 octeontx2-af: CGX: add bounds check to cgx_speed_mbps index [ Upstream commit c0bf0a4f3f1f5f57aa83e1400ba4f56f0abfd542 ] cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham Cc: Linu Cherian Cc: Geetha sowjanya Cc: hariprasad Cc: Subbaraya Sundeep Cc: Andrew Lunn Cc: stable Signed-off-by: Sam Daly Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4649d600cb4a82f58b3a0dc42cfaa5e6b8b2bfd7 Author: Shardul Bankar Date: Sat May 30 15:47:45 2026 -0400 mptcp: do not drop partial packets [ Upstream commit 50c2d91c5dfa0e465826ec1f8dbad9cdc254bd85 ] When a packet arrives with map_seq < ack_seq < end_seq, the beginning of the packet has already been acknowledged but the end contains new data. Currently the entire packet is dropped as "old data," forcing the sender to retransmit. Instead, skip the already-acked bytes by adjusting the skb offset and enqueue only the new portion. Update bytes_received and ack_seq to reflect the new data consumed. A previous attempt at this fix has been sent by Paolo Abeni [1], but had issues [2]: it also added a zero-window check and changed rcv_wnd_sent initialization, which caused test regressions. This version addresses only the partial packet handling without modifying receive window accounting. Fixes: ab174ad8ef76 ("mptcp: move ooo skbs into msk out of order queue.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/c9b426a4e163aa3c4fe8b80c79f1a610f47ae7d8.1763075056.git.pabeni@redhat.com [1] Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/600 [2] Signed-off-by: Shardul Bankar [pabeni@redhat.com: update map] Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-1-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni [ dropped `msk->bytes_received += copy_len;` and relocated the `drop:` label to the function end for the existing RCVPRUNED `goto drop;` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit bdb6183d26852b3c77a4cfab80e6ee11888a640c Author: Matthieu Baerts (NGI0) Date: Sat May 30 10:37:34 2026 -0400 selftests: mptcp: drop nanoseconds width specifier [ Upstream commit 01ff78e4b3d98689184c52d97f9575dfbdc3b10f ] Using the format specifier +%s%3N with GNU date is honoured, and only prints 3 digits of the nanoseconds portion of the seconds since epoch, which corresponds to the milliseconds. The uutils implementation of date currently does not honour this, and always prints all 9 digits. This is a known issue [1], but can be worked around by adapting this test to use nanoseconds instead of microseconds, and then divide it by 1e6. This fix is similar to what has been done on systemd side [2], and it is needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0. Note that the Fixes tag is there even if this patch doesn't fix an issue in the kernel selftests, but it is useful for those using uutils 0.8.0. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Link: https://github.com/uutils/coreutils/issues/11658 [1] Link: https://github.com/systemd/systemd/pull/41627 [2] Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c5eea9a24dd0666a8dd00a8dfa103c3373a05d64 Author: Li Xiasong Date: Sat May 30 07:48:13 2026 -0400 mptcp: pm: fix ADD_ADDR timer infinite retry on option space insufficient [ Upstream commit 51e398a3b8961b26a8c0a4ba9a777c5339791707 ] When TCP option space is insufficient (e.g., when sending ADD_ADDR with an IPv6 address and port while tcp_timestamps is enabled), the original code jumped to out_unlock without clearing the addr_signal flag. This caused mptcp_pm_add_timer to keep rescheduling indefinitely, not sending ADD_ADDR, preventing subsequent addresses in the endpoint list from being announced. Handle this case by clearing the ADD_ADDR signal and skipping the matching ADD_ADDR retransmission entry. The skip path cancels the matching timer (with id check) and advances PM state progression, preserving forward progress to subsequent PM work. This cancellation is inherently best-effort. A concurrent add_timer callback may already be running and may acquire pm.lock before the cancel path updates entry state. In that case, one final ADD_ADDR transmit attempt can still be executed. Once the cancel path sets entry->retrans_times to ADD_ADDR_RETRANS_MAX, the callback-side retrans_times check suppresses further ADD_ADDR retransmissions. Note that when an ADD_ADDR is being prepared, a pure-ACK is queued. On the output side, it means that it is fine to skip non-pure-ACK packets, when drop_other_suboptions is set: a pure-ACK will be processed soon after. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Signed-off-by: Li Xiasong Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-2-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 31882893cafa120d76059cc080eac3bec24495df Author: Al Viro Date: Sat May 30 07:40:43 2026 -0400 use less confusing names for iov_iter direction initializers [ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ] READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro Stable-dep-of: a4f0b001782b ("vsock/virtio: reset connection on receiving queue overflow") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c7e8971abd70e9d022f1c251ba2508f8dc7f2db8 Author: Justin Iurman Date: Sat May 30 07:39:27 2026 -0400 ipv6: ioam: add NULL check for idev in ipv6_hop_ioam() [ Upstream commit d4ea0dfd75011b78cebf3808f98ac4c4f51a6fb9 ] Reported by Sashiko: The function ipv6_hop_ioam() accesses __in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr via RCU, __in6_dev_get() can return NULL during interface teardown, which could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop option. Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2b2df0082d963c63c89f58b2c18eec37f229451e Author: Eric Dumazet Date: Sat May 30 07:39:26 2026 -0400 ipv6/addrconf: annotate data-races around devconf fields (II) [ Upstream commit 2f0ff05a44302c91af54a5f9efe1b65b7681540e ] Final (?) round of this series. Annotate lockless reads on following devconf fields, because they be changed concurrently from /proc/net/ipv6/conf. - accept_dad - optimistic_dad - use_optimistic - use_oif_addrs_only - ra_honor_pio_life - keep_addr_on_down - ndisc_notify - ndisc_evict_nocarrier - suppress_frag_ndisc - addr_gen_mode - seg6_enabled - ioam6_enabled - ioam6_id - ioam6_id_wide - drop_unicast_in_l2_multicast - mldv[12]_unsolicited_report_interval - force_mld_version - force_tllao - accept_untracked_na - drop_unsolicited_na - accept_source_route Signed-off-by: Eric Dumazet Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Stable-dep-of: d4ea0dfd7501 ("ipv6: ioam: add NULL check for idev in ipv6_hop_ioam()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1b2af820247c6e9c1d7a92c14924b24f2e137ba5 Author: Jose Ignacio Tornos Martinez Date: Sat May 30 07:38:58 2026 -0400 ice: fix VF queue configuration with low MTU values [ Upstream commit 3ba4dd024d26372733d1c02e13e076c6016e3320 ] The ice driver's VF queue configuration validation rejects databuffer_size values below 1024 bytes, which prevents VFs from using MTU values below 871 bytes. The iavf driver calculates databuffer_size based on the MTU using: databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128) where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN). For MTU values below 871: MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected) MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted) The 1024-byte minimum seems unnecessarily restrictive, because the hardware supports databuffer_size as low as 128 bytes (the alignment boundary), which should allow MTU values down to the standard minimum of 68 bytes. I haven't found the reason why the limit was configured in the commit 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so with no more information and since it is working, change the minimum databuffer_size validation from 1024 to 128 bytes to allow standard low MTU values while still preventing invalid configurations. Fixes: 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message") cc: stable@vger.kernel.org Signed-off-by: Jose Ignacio Tornos Martinez Reviewed-by: Jacob Keller Reviewed-by: Michal Swiatkowski Reviewed-by: Paul Menzel Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8be6685cdd1255bcc85f9b59e4bfc313aefc5c1b Author: Michael Bommarito Date: Fri May 29 20:07:34 2026 -0400 net: hsr: defer node table free until after RCU readers [ Upstream commit aaec7096f9961eb223b5b149abe9495525c205d9 ] HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu(). Fixes: b9a1e627405d ("hsr: implement dellink to clean up resources") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260513233838.3064715-2-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski [ replaced `list_del`+`call_rcu(hsr_free_node_rcu)` with `list_del_rcu`+`kfree_rcu(node, rcu_head)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 41c8c1c7923e86e0eb59cfb4279349112756a336 Author: Jiexun Wang Date: Fri May 29 19:38:26 2026 -0400 Bluetooth: serialize accept_q access [ Upstream commit e83f5e24da741fa9405aeeff00b08c5ee7c37b88 ] bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Jann Horn Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Signed-off-by: Jiexun Wang Reviewed-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 444f4530df36da95eed3ef627cc6fc8b2a7974ad Author: Luiz Augusto von Dentz Date: Fri May 29 19:38:25 2026 -0400 Bluetooth: Init sk_peer_* on bt_sock_alloc [ Upstream commit 464c702fb9374ff8f3f816f24fb7ac719dd20e1e ] This makes sure peer information is always available via sock when using bt_sock_alloc. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: e83f5e24da74 ("Bluetooth: serialize accept_q access") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c0e0d037d9308b1b9203f2d3d6f7bd78278a9eac Author: Luiz Augusto von Dentz Date: Fri May 29 19:38:24 2026 -0400 Bluetooth: Consolidate code around sk_alloc into a helper function [ Upstream commit 6bfa273e533d7b25eee3d74e28a7fe8e6a8e7a93 ] This consolidates code around sk_alloc into bt_sock_alloc which does take care of common initialization. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: e83f5e24da74 ("Bluetooth: serialize accept_q access") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 06fa8e69019fd3c41a7b0ea8c5f509c3a33dc227 Author: Dawei Feng Date: Fri May 29 19:30:29 2026 -0400 qed: fix double free in qed_cxt_tables_alloc() [ Upstream commit 2bccfb8476ca5f3548afbd623dc7a6980d4e77de ] If one of the later PF or VF CID bitmap allocations fails, qed_cid_map_alloc() jumps to cid_map_fail and frees the previously allocated CID bitmaps before returning an error. qed_cxt_tables_alloc() then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free() again. Fix this by setting each CID bitmap pointer to NULL after bitmap_free() to avoid double free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime reproduction was not attempted because exercising the failing allocation path requires device-specific setup. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a00b379cb9ce180e7bc51816fccf6a1b08cfc9f0 Author: Christophe JAILLET Date: Fri May 29 19:30:28 2026 -0400 qed: Use the bitmap API to simplify some functions [ Upstream commit 5e6c7ccd3ea4b25dd6b4b0363859913f315deacb ] 'cid_map' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Also change some 'memset()' into 'bitmap_zero()' to keep consistency. This is also much less verbose. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller Stable-dep-of: 2bccfb8476ca ("qed: fix double free in qed_cxt_tables_alloc()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 0d5104390b445e7bd664ad583837e4c04d892c9d Author: Michael Bommarito Date: Fri May 29 19:22:04 2026 -0400 Bluetooth: MGMT: validate Add Extended Advertising Data length [ Upstream commit d3f7d17960ed50df3a6709c5158caff989c8c905 ] MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data. Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 42fe380baaaccbe635c34ca07b29d19b9ec2498d Author: Luiz Augusto von Dentz Date: Fri May 29 19:22:03 2026 -0400 Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2 [ Upstream commit cba6b758711cab946c787f7c15be92cc749b8e1f ] This make use of hci_cmd_sync_queue for the following MGMT commands: Add Advertising Remove Advertising Add Extended Advertising Parameters Add Extended Advertising Data mgmt-tester -s "Add Advertising" Test Summary ------------ Add Advertising - Failure: LE off Passed Add Advertising - Invalid Params 1 (AD too long) Passed Add Advertising - Invalid Params 2 (Malformed len) Passed Add Advertising - Invalid Params 3 (Malformed len) Passed Add Advertising - Invalid Params 4 (Malformed len) Passed Add Advertising - Invalid Params 5 (AD too long) Passed Add Advertising - Invalid Params 6 (ScRsp too long) Passed Add Advertising - Invalid Params 7 (Malformed len) Passed Add Advertising - Invalid Params 8 (Malformed len) Passed Add Advertising - Invalid Params 9 (Malformed len) Passed Add Advertising - Invalid Params 10 (ScRsp too long) Passed Add Advertising - Rejected (Timeout, !Powered) Passed Add Advertising - Success 1 (Powered, Add Adv Inst) Passed Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed Add Advertising - Success 3 (!Powered, Adv Enable) Passed Add Advertising - Success 4 (Set Adv on override) Passed Add Advertising - Success 5 (Set Adv off override) Passed Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed Add Advertising - Success 8 (Connectable Flag) Passed Add Advertising - Success 9 (General Discov Flag) Passed Add Advertising - Success 10 (Limited Discov Flag) Passed Add Advertising - Success 11 (Managed Flags) Passed Add Advertising - Success 12 (TX Power Flag) Passed Add Advertising - Success 13 (ADV_SCAN_IND) Passed Add Advertising - Success 14 (ADV_NONCONN_IND) Passed Add Advertising - Success 15 (ADV_IND) Passed Add Advertising - Success 16 (Connectable -> on) Passed Add Advertising - Success 17 (Connectable -> off) Passed Add Advertising - Success 18 (Power -> off, Remove) Passed Add Advertising - Success 19 (Power -> off, Keep) Passed Add Advertising - Success 20 (Add Adv override) Passed Add Advertising - Success 21 (Timeout expires) Passed Add Advertising - Success 22 (LE -> off, Remove) Passed Add Advertising - Success (Empty ScRsp) Passed Add Advertising - Success (ScRsp only) Passed Add Advertising - Invalid Params (ScRsp too long) Passed Add Advertising - Success (ScRsp appear) Passed Add Advertising - Invalid Params (ScRsp appear long) Passed Add Advertising - Success (Appear is null) Passed Add Advertising - Success (Name is null) Passed Add Advertising - Success (Complete name) Passed Add Advertising - Success (Shortened name) Passed Add Advertising - Success (Short name) Passed Add Advertising - Success (Name + data) Passed Add Advertising - Invalid Params (Name + data) Passed Add Advertising - Success (Name+data+appear) Passed Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 2.17 seconds mgmt-tester -s "Remove Advertising" Test Summary ------------ Remove Advertising - Invalid Params 1 Passed Remove Advertising - Success 1 Passed Remove Advertising - Success 2 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0585 seconds mgmt-tester -s "Ext Adv MGMT Params" Test Summary: ------------ Ext Adv MGMT Params - Unpowered Passed Ext Adv MGMT Params - Invalid parameters Passed Ext Adv MGMT Params - Success Passed Ext Adv MGMT Params - (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0746 seconds mgmt-tester -s "Ext Adv MGMT -" Test Summary ------------ Ext Adv MGMT - Data set without Params Passed Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed Ext Adv MGMT - AD Data (5.0) Success Passed Ext Adv MGMT - AD Scan Response (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0805 seconds Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Stable-dep-of: d3f7d17960ed ("Bluetooth: MGMT: validate Add Extended Advertising Data length") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c4351d220046aa368d57411f90c049d01a48570c Author: Shuai Zhang Date: Fri May 29 17:48:45 2026 -0400 Bluetooth: hci_qca: Convert timeout from jiffies to ms [ Upstream commit 375ba7484132662a4a8c7547d088fb6275c00282 ] Since the timer uses jiffies as its unit rather than ms, the timeout value must be converted from ms to jiffies when configuring the timer. Otherwise, the intended 8s timeout is incorrectly set to approximately 33s. To improve readability, embed msecs_to_jiffies() directly in the macro definitions and drop the _MS suffix from macros that now yield jiffies values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT, CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT. IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are intentionally left unchanged. Their values are stored in the struct fields wake_retrans and tx_idle_delay, which hold ms values at runtime and can be modified via debugfs. The msecs_to_jiffies() conversion happens at each call site against the field value, so it cannot be embedded in the macro. Wake timer depends on commit c347ca17d62a Cc: stable@vger.kernel.org Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR") Reviewed-by: Paul Menzel Acked-by: Bartosz Golaszewski Signed-off-by: Shuai Zhang Signed-off-by: Luiz Augusto von Dentz [ adapted to `vmalloc`-based memdump path and older `qca_serdev_shutdown(struct device *dev)` signature ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 407217734835d21d4e0105ebf347860dc1806f88 Author: Safa Karakuş Date: Fri May 29 15:08:13 2026 -0400 Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() [ Upstream commit ab1513597c6cf17cd1ad2a21e3b045421b48e022 ] bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang Reviewed-by: Siwei Zhang Signed-off-by: Safa Karakuş Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9cf7eb8919344932f909b2fac76296f7656fda8d Author: Michael Bommarito Date: Fri May 29 13:21:53 2026 -0400 smb: client: require net admin for CIFS SWN netlink [ Upstream commit d1ebfce2c1d161186a82e77590bf7da2ea1bce91 ] CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. Fixes: fed979a7e082 ("cifs: Set witness notification handler for messages from userspace daemon") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ad499e4c0914329b86f9d40fc9080f0f99968859 Author: Ido Schimmel Date: Fri May 29 13:21:52 2026 -0400 genetlink: Use internal flags for multicast groups [ Upstream commit cd4d7263d58ab98fd4dee876776e4da6c328faa3 ] As explained in commit e03781879a0d ("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the multicast group structure reuses uAPI flags despite the field not being exposed to user space. This makes it impossible to extend its use without adding new uAPI flags, which is inappropriate for internal kernel checks. Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert the existing users to use them instead of the uAPI flags. Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require 'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d ("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group"). No functional changes intended. Signed-off-by: Ido Schimmel Reviewed-by: Mat Martineau Reviewed-by: Andy Shevchenko Signed-off-by: David S. Miller Stable-dep-of: d1ebfce2c1d1 ("smb: client: require net admin for CIFS SWN netlink") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ee125bbff75699838fe9e8a303a0c3549bba3f1d Author: Johan Hovold Date: Wed May 20 11:18:21 2026 -0400 spi: lantiq-ssc: fix controller deregistration [ Upstream commit b99206710d032c16b7f8b75e4bc18414d8e4b9f4 ] Make sure to deregister the controller before releasing underlying resources like clocks during driver unbind. Fixes: 17f84b793c01 ("spi: lantiq-ssc: add support for Lantiq SSC SPI controller") Cc: stable@vger.kernel.org # 4.11 Cc: Hauke Mehrtens Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260409120419.388546-17-johan@kernel.org Signed-off-by: Mark Brown [ adapted spi_controller/host naming to spi_master/master and preserved the int-returning remove() with trailing return 0 ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e036acad26f02a9f068bca856addd30c588fced6 Author: Johan Hovold Date: Wed May 20 10:27:57 2026 -0400 spi: st-ssc4: fix controller deregistration [ Upstream commit 19857374010d06ca6a2f7c2c53464122eb804df0 ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: 9e862375c542 ("spi: Add new driver for STMicroelectronics' SPI Controller") Cc: stable@vger.kernel.org # 4.0 Cc: Lee Jones Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-18-johan@kernel.org Signed-off-by: Mark Brown [ changed spi_controller/host API calls to spi_master/master equivalents ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8ae13862d8603ee8c1d0354af267f4a291a711b9 Author: Chao Yu Date: Wed May 20 07:49:07 2026 -0400 f2fs: fix false alarm of lockdep on cp_global_sem lock [ Upstream commit 6a5e3de9c2bb0b691d16789a5d19e9276a09b308 ] lockdep reported a potential deadlock: a) TCMU device removal context: - call del_gendisk() to get q->q_usage_counter - call start_flush_work() to get work_completion of wb->dwork b) f2fs writeback context: - in wb_workfn(), which holds work_completion of wb->dwork - call f2fs_balance_fs() to get sbi->gc_lock c) f2fs vfs_write context: - call f2fs_gc() to get sbi->gc_lock - call f2fs_write_checkpoint() to get sbi->cp_global_sem d) f2fs mount context: - call recover_fsync_data() to get sbi->cp_global_sem - call f2fs_check_and_fix_write_pointer() to call blkdev_report_zones() that goes down to blk_mq_alloc_request and get q->q_usage_counter Original callstack is in Closes tag. However, I think this is a false alarm due to before mount returns successfully (context d), we can not access file therein via vfs_write (context c). Let's introduce per-sb cp_global_sem_key, and assign the key for cp_global_sem, so that lockdep can recognize cp_global_sem from different super block correctly. A lot of work are done by Shin'ichiro Kawasaki, thanks a lot for the work. Fixes: c426d99127b1 ("f2fs: Check write pointer consistency of open zones") Cc: stable@kernel.org Reported-and-tested-by: Shin'ichiro Kawasaki Closes: https://lore.kernel.org/linux-f2fs-devel/20260218125237.3340441-1-shinichiro.kawasaki@wdc.com Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim [ adapted to plain `struct rw_semaphore` (no `f2fs_rwsem` wrapper) and moved success-path `lockdep_unregister_key` from `kill_f2fs_super` to `f2fs_put_super` where sbi is actually freed ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f4e1a88c18a96241f35f348067b604b0ba04c5b4 Author: Yongpeng Yang Date: Wed May 20 07:29:13 2026 -0400 f2fs: fix incorrect file address mapping when inline inode is unwritten [ Upstream commit 68a0178981a0f493295afa29f8880246e561494c ] When `fileinfo->fi_flags` does not have the `FIEMAP_FLAG_SYNC` bit set and inline data has not been persisted yet, the physical address of the extent is calculated incorrectly for unwritten inline inodes. root@vm:/mnt/f2fs# dd if=/dev/zero of=data.3k bs=3k count=1 root@vm:/mnt/f2fs# f2fs_io fiemap 0 100 data.3k Fiemap: offset = 0 len = 100 logical addr. physical addr. length flags 0 0000000000000000 00000ffffffff16c 0000000000000c00 00000301 This patch fixes the issue by checking if the inode's address is valid. If the inline inode is unwritten, set the physical address to 0 and mark the extent with `FIEMAP_EXTENT_UNKNOWN | FIEMAP_EXTENT_DELALLOC` flags. Cc: stable@kernel.org Fixes: 67f8cf3cee6f ("f2fs: support fiemap for inline_data") Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ renamed `ifolio` to `ipage` in `inline_data_addr()` and `F2FS_INODE()` calls ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 278c56581eb0432b7213d57ef77144a418db304e Author: Matthieu Baerts (NGI0) Date: Tue May 19 12:18:04 2026 -0400 mptcp: pm: ADD_ADDR rtx: resched blocked ADD_ADDR quicker [ Upstream commit 3cf12492891c4b5ff54dda404a2de4ec54c9e1b5 ] When an ADD_ADDR needs to be retransmitted and another one has already been prepared -- e.g. multiple ADD_ADDRs have been sent in a row and need to be retransmitted later -- this additional retransmission will need to wait. In this case, the timer was reset to TCP_RTO_MAX / 8, which is ~15 seconds. This delay is unnecessary long: it should just be rescheduled at the next opportunity, e.g. after the retransmission timeout. Without this modification, some issues can be seen from time to time in the selftests when multiple ADD_ADDRs are sent, and the host takes time to process them, e.g. the "signal addresses, ADD_ADDR timeout" MPTCP Join selftest, especially with a debug kernel config. Note that on older kernels, 'timeout' is not available. It should be enough to replace it by one second (HZ). Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-6-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ replaced `TCP_RTO_MAX / 8` with `HZ` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 23079e0b7742ec114d3507c3e3aad01b7b69e4af Author: Matthieu Baerts (NGI0) Date: Mon May 18 10:40:42 2026 -0400 mptcp: pm: ADD_ADDR rtx: fix potential data-race [ Upstream commit 5cd6e0ad79d2615264f63929f8b457ad97ae550d ] This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-3-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied hunk to `net/mptcp/pm_netlink.c` instead of `net/mptcp/pm.c` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d8a8adccf831e88b7ae4f441e6840192c04d4ca3 Author: Matthieu Baerts (NGI0) Date: Mon May 18 10:23:33 2026 -0400 mptcp: pm: prio: skip closed subflows [ Upstream commit 166b78344031bf7ac9f55cb5282776cfd85f220e ] When sending an MP_PRIO, closed subflows need to be skipped. This fixes the case where the initial subflow got closed, re-opened later, then an MP_PRIO is needed for the same local address. Note that explicit MP_PRIO cannot be sent during the 3WHS, so it is fine to use __mptcp_subflow_active(). Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Cc: stable@vger.kernel.org Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-9-fca8091060a4@kernel.org Signed-off-by: Jakub Kicinski [ applied to renamed function `mptcp_pm_nl_mp_prio_send_ack()` in `pm_netlink.c` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 7c27e6c4f089c8e1330b512d11b1bfb92805fc32 Author: Piyush Sachdeva Date: Sun May 17 19:05:32 2026 -0400 smb: client: Use FullSessionKey for AES-256 encryption key derivation [ Upstream commit 5be7a0cef3229fb3b63a07c0d289daf752545424 ] When Kerberos authentication is used with AES-256 encryption (AES-256-CCM or AES-256-GCM), the SMB3 encryption and decryption keys must be derived using the full session key (Session.FullSessionKey) rather than just the first 16 bytes (Session.SessionKey). Per MS-SMB2 section 3.2.5.3.1, when Connection.Dialect is "3.1.1" and Connection.CipherId is AES-256-CCM or AES-256-GCM, Session.FullSessionKey must be set to the full cryptographic key from the GSS authentication context. The encryption and decryption key derivation (SMBC2SCipherKey, SMBS2CCipherKey) must use this FullSessionKey as the KDF input. The signing key derivation continues to use Session.SessionKey (first 16 bytes) in all cases. Previously, generate_key() hardcoded SMB2_NTLMV2_SESSKEY_SIZE (16) as the HMAC-SHA256 key input length for all derivations. When Kerberos with AES-256 provides a 32-byte session key, the KDF for encryption/decryption was using only the first 16 bytes, producing keys that did not match the server's, causing mount failures with sec=krb5 and require_gcm_256=1. Add a full_key_size parameter to generate_key() and pass the appropriate size from generate_smb3signingkey(): - Signing: always SMB2_NTLMV2_SESSKEY_SIZE (16 bytes) - Encryption/Decryption: ses->auth_key.len when AES-256, otherwise 16 Also fix cifs_dump_full_key() to report the actual session key length for AES-256 instead of hardcoded CIFS_SESS_KEY_SIZE, so that userspace tools like Wireshark receive the correct key for decryption. Cc: Reviewed-by: Bharath SM Signed-off-by: Piyush Sachdeva Signed-off-by: Piyush Sachdeva Signed-off-by: Steve French [ adapted to legacy crypto_shash API and ses->binding boolean instead of upstream's hmac_sha256 helpers and chan_lock machinery ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2525998ac956476bded26b9f34c4164dc890b87a Author: Filipe Manana Date: Sun May 17 19:04:56 2026 -0400 btrfs: fix missing last_unlink_trans update when removing a directory [ Upstream commit 999757231c49376cd1a37308d2c8c4c9932571e1 ] When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (258 1 0) type 2 [445771.660110] transid 9 data_len 0 name_len 4 [445771.660111] item 9 key (257 DIR_INDEX 2) itemoff 15733 itemsize 34 [445771.660112] location key (258 1 0) type 2 [445771.660113] transid 9 data_len 0 name_len 4 [445771.660114] item 10 key (258 INODE_ITEM 0) itemoff 15573 itemsize 160 [445771.660115] inode generation 9 transid 10 size 0 nbytes 0 [445771.660116] block group 0 mode 40755 links 2 uid 0 gid 0 [445771.660117] rdev 0 sequence 0 flags 0x0 [445771.660118] atime 1775744885.645502983 [445771.660119] ctime 1775744885.645502983 [445771.660120] mtime 1775744885.645502983 [445771.660121] otime 1775744885.645502983 [445771.660122] item 11 key (258 INODE_REF 257) itemoff 15559 itemsize 14 [445771.660123] index 2 name_len 4 [445771.660124] item 12 key (258 INODE_REF 259) itemoff 15545 itemsize 14 [445771.660125] index 2 name_len 4 [445771.660126] item 13 key (259 INODE_ITEM 0) itemoff 15385 itemsize 160 [445771.660127] inode generation 9 transid 10 size 8 nbytes 0 [445771.660128] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.660129] rdev 0 sequence 1 flags 0x0 [445771.660130] atime 1775744885.645502983 [445771.660130] ctime 1775744885.645502983 [445771.660131] mtime 1775744885.645502983 [445771.660132] otime 1775744885.645502983 [445771.660133] item 14 key (259 INODE_REF 256) itemoff 15371 itemsize 14 [445771.660134] index 3 name_len 4 [445771.660135] item 15 key (259 DIR_ITEM 2676584006) itemoff 15337 itemsize 34 [445771.660136] location key (258 1 0) type 2 [445771.660137] transid 10 data_len 0 name_len 4 [445771.660138] item 16 key (259 DIR_INDEX 2) itemoff 15303 itemsize 34 [445771.660139] location key (258 1 0) type 2 [445771.660140] transid 10 data_len 0 name_len 4 [445771.660144] BTRFS error (device dm-0): block=30408704 write time tree block corruption detected [445771.661650] ------------[ cut here ]------------ [445771.662358] WARNING: fs/btrfs/disk-io.c:326 at btree_csum_one_bio+0x217/0x230 [btrfs], CPU#8: mount/3581087 [445771.663588] Modules linked in: btrfs f2fs xfs (...) [445771.671229] CPU: 8 UID: 0 PID: 3581087 Comm: mount Tainted: G W 7.0.0-rc6-btrfs-next-230+ #2 PREEMPT(full) [445771.672575] Tainted: [W]=WARN [445771.672987] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [445771.674460] RIP: 0010:btree_csum_one_bio+0x217/0x230 [btrfs] [445771.675222] Code: 89 44 24 (...) [445771.677364] RSP: 0018:ffffd23882247660 EFLAGS: 00010246 [445771.678029] RAX: 0000000000000000 RBX: ffff89f6c51d1a90 RCX: 0000000000000000 [445771.678975] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff89f406020000 [445771.679983] RBP: ffff89f821204000 R08: 0000000000000000 R09: 00000000ffefffff [445771.680905] R10: ffffd23882247448 R11: 0000000000000003 R12: ffffd23882247668 [445771.681978] R13: ffff89f458e40fc0 R14: ffff89f737f4f500 R15: ffff89f737f4f500 [445771.682912] FS: 00007f0447a98840(0000) GS:ffff89fb9771d000(0000) knlGS:0000000000000000 [445771.684393] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [445771.685230] CR2: 00007f0447bf1330 CR3: 000000017cb02002 CR4: 0000000000370ef0 [445771.686273] Call Trace: [445771.686646] [445771.686969] btrfs_submit_bbio+0x83f/0x860 [btrfs] [445771.687750] ? write_one_eb+0x28f/0x340 [btrfs] [445771.688428] btree_writepages+0x2e3/0x550 [btrfs] [445771.689180] ? kmem_cache_alloc_noprof+0x12a/0x490 [445771.689963] ? alloc_extent_state+0x19/0x120 [btrfs] [445771.690801] ? kmem_cache_free+0x135/0x380 [445771.691328] ? preempt_count_add+0x69/0xa0 [445771.691831] ? set_extent_bit+0x252/0x8e0 [btrfs] [445771.692468] ? xas_load+0x9/0xc0 [445771.692873] ? xas_find+0x14d/0x1a0 [445771.693304] do_writepages+0xc6/0x160 [445771.693756] filemap_writeback+0xb8/0xe0 [445771.694274] btrfs_write_marked_extents+0x61/0x170 [btrfs] [445771.694999] btrfs_write_and_wait_transaction+0x4e/0xc0 [btrfs] [445771.695818] btrfs_commit_transaction+0x5c8/0xd10 [btrfs] [445771.696530] ? kmem_cache_free+0x135/0x380 [445771.697120] ? release_extent_buffer+0x34/0x160 [btrfs] [445771.697786] btrfs_recover_log_trees+0x7be/0x7e0 [btrfs] [445771.698525] ? __pfx_replay_one_buffer+0x10/0x10 [btrfs] [445771.699206] open_ctree+0x11e5/0x1810 [btrfs] [445771.699776] btrfs_get_tree.cold+0xb/0x162 [btrfs] [445771.700463] ? fscontext_read+0x165/0x180 [445771.701146] ? rw_verify_area+0x50/0x180 [445771.701866] vfs_get_tree+0x25/0xd0 [445771.702491] vfs_cmd_create+0x59/0xe0 [445771.703125] __do_sys_fsconfig+0x303/0x610 [445771.703603] do_syscall_64+0xe9/0xf20 [445771.703974] entry_SYSCALL_64_after_hwframe+0x76/0x7e [445771.704700] RIP: 0033:0x7f0447cbd4aa [445771.705108] Code: 73 01 c3 (...) [445771.707263] RSP: 002b:00007ffc4e528318 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [445771.708107] RAX: ffffffffffffffda RBX: 00005561585d8c20 RCX: 00007f0447cbd4aa [445771.708931] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003 [445771.709744] RBP: 00005561585d9120 R08: 0000000000000000 R09: 0000000000000000 [445771.710674] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [445771.711477] R13: 00007f0447e4f580 R14: 00007f0447e5126c R15: 00007f0447e36a23 [445771.712277] [445771.712541] ---[ end trace 0000000000000000 ]--- [445771.713382] BTRFS error (device dm-0): error while writing out transaction: -5 [445771.714679] BTRFS warning (device dm-0): Skipping commit of aborted transaction. [445771.715562] BTRFS error (device dm-0 state A): Transaction aborted (error -5) [445771.716459] BTRFS: error (device dm-0 state A) in cleanup_transaction:2068: errno=-5 IO failure [445771.717936] BTRFS error (device dm-0 state EA): failed to recover log trees with error: -5 [445771.719681] BTRFS error (device dm-0 state EA): open_ctree failed: -5 The problem is that such a fsync should have result in a fallback to a transaction commit, but that did not happen because through the btrfs_rmdir() we never update the directory's last_unlink_trans field. Any inode that had a link removed must have its last_unlink_trans updated to the ID of transaction used for the operation, otherwise fsync and log replay will not work correctly. btrfs_rmdir() calls btrfs_unlink_inode() and through that call chain we never call btrfs_record_unlink_dir() in order to update last_unlink_trans. However btrfs_unlink(), which is used for unlinking regular files, calls btrfs_record_unlink_dir() and then calls btrfs_unlink_inode(). So fix this by moving the call to btrfs_record_unlink_dir() from btrfs_unlink() to btrfs_unlink_inode(). A test case for fstests will follow soon. Reported-by: Slava0135 Link: https://lore.kernel.org/linux-btrfs/CAAJYhww5ov62Hm+n+tmhcL-e_4cBobg+OWogKjOJxVUXivC=MQ@mail.gmail.com/ CC: stable@vger.kernel.org Signed-off-by: Filipe Manana Signed-off-by: David Sterba [ wrapped dir and inode arguments with BTRFS_I() since 6.1 btrfs_rmdir() uses struct inode * instead of struct btrfs_inode * ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5de2665e913a10ad70aaeecf736b97276e83d995 Author: Michael Bommarito Date: Sat May 16 15:09:10 2026 -0400 smb: client: validate dacloffset before building DACL pointers [ Upstream commit f98b48151cc502ada59d9778f0112d21f2586ca3 ] parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito Signed-off-by: Steve French [ renamed smb_ntsd/smb_acl structs to cifs_ntsd/cifs_acl and kept existing inline ACL size check instead of using missing validate_dacl() helper ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 98b8104978474d381256a2b2fb0e7ca8e05a7bfa Author: Ulf Hansson Date: Fri May 15 11:55:36 2026 -0400 pmdomain: core: Fix detach procedure for virtual devices in genpd [ Upstream commit 26735dfdd8930d9ef1fa92e590a9bf77726efdf6 ] If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(), genpd calls pm_runtime_enable() for the corresponding virtual device that it registers. While this avoids boilerplate code in drivers, there is no corresponding call to pm_runtime_disable() in genpd_dev_pm_detach(). This means these virtual devices are typically detached from its genpd, while runtime PM remains enabled for them, which is not how things are designed to work. In worst cases it may lead to critical errors, like a NULL pointer dereference bug in genpd_runtime_suspend(), which was recently reported. For another case, we may end up keeping an unnecessary vote for a performance state for the device. To fix these problems, let's add this missing call to pm_runtime_disable() in genpd_dev_pm_detach(). Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/ Fixes: 3c095f32a92b ("PM / Domains: Add support for multi PM domains per device to genpd") Cc: stable@vger.kernel.org Tested-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 70cc336f5b58d0e7a051a9bb7efb18a260b3dc02 Author: Steven Rostedt Date: Fri May 15 11:20:51 2026 -0400 tracing/probes: Limit size of event probe to 3K [ Upstream commit b2aa3b4d64e460ac606f386c24e7d8a873ce6f1a ] There currently isn't a max limit an event probe can be. One could make an event greater than PAGE_SIZE, which makes the event useless because if it's bigger than the max event that can be recorded into the ring buffer, then it will never be recorded. A event probe should never need to be greater than 3K, so make that the max size. As long as the max is less than the max that can be recorded onto the ring buffer, it should be fine. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Acked-by: Masami Hiramatsu (Google) Fixes: 93ccae7a22274 ("tracing/kprobes: Support basic types on dynamic events") Link: https://patch.msgid.link/20260428122302.706610ba@gandalf.local.home Signed-off-by: Steven Rostedt [ adjusted context for missing later-kernel infrastructure and used `goto out` instead of `goto fail` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d8224b1be6627c6c3b204bfb264508d27c65ac44 Author: Yochai Eisenrich Date: Fri May 15 10:48:27 2026 -0400 btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak [ Upstream commit 973e57c726c1f8e77259d1c8e519519f1e9aea77 ] btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data. Fixes: 7fde62bffb57 ("Btrfs: buffer results in the space_info ioctl") CC: stable@vger.kernel.org # 3.0 Signed-off-by: Yochai Eisenrich Reviewed-by: David Sterba Signed-off-by: David Sterba [ adapted upstream's `return -EFAULT;` to stable's `ret = -EFAULT;` fall-through to existing `out:` cleanup label ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5a60bef9d3a20be0c6a3bf1b3f01c9a23a40642d Author: Johan Hovold Date: Fri May 15 08:15:25 2026 -0400 spi: topcliff-pch: fix controller deregistration [ Upstream commit 5d6f477d6fc0767c57c5e1e6f55a1662820eef87 ] Make sure to deregister the controller before disabling and releasing underlying resources like interrupts and DMA during driver unbind. Fixes: e8b17b5b3f30 ("spi/topcliff: Add topcliff platform controller hub (PCH) spi bus driver") Cc: stable@vger.kernel.org # 2.6.37 Cc: Masayuki Ohtake Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260414134319.978196-8-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller_*(data->host) calls to spi_master_*(data->master) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 76240ae8364fd3d99acfcdcafb1926f563ff4745 Author: Uwe Kleine-König Date: Fri May 15 08:15:24 2026 -0400 spi: topcliff-pch: Convert to platform remove callback returning void [ Upstream commit b082694f18bdff807b42a3bccc62c3a524168f23 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230303172041.2103336-83-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown Stable-dep-of: 5d6f477d6fc0 ("spi: topcliff-pch: fix controller deregistration") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 46cf3646dea54baeaa2eafe3fb1ba769947f31b0 Author: Thomas Zimmermann Date: Fri May 15 07:45:20 2026 -0400 fbcon: Avoid OOB font access if console rotation fails [ Upstream commit e4ef723d8975a2694cc90733a6b888a5e2841842 ] Clear the font buffer if the reallocation during console rotation fails in fbcon_rotate_font(). The putcs implementations for the rotated buffer will return early in this case. See [1] for an example. Currently, fbcon_rotate_font() keeps the old buffer, which is too small for the rotated font. Printing to the rotated console with a high-enough character code will overflow the font buffer. v2: - fix typos in commit message Signed-off-by: Thomas Zimmermann Fixes: 6cc50e1c5b57 ("[PATCH] fbcon: Console Rotation - Add support to rotate font bitmap") Cc: stable@vger.kernel.org # v2.6.15+ Link: https://elixir.bootlin.com/linux/v6.19/source/drivers/video/fbdev/core/fbcon_ccw.c#L144 # [1] Signed-off-by: Helge Deller [ renamed `par` to `ops` to match the 6.12 local pointer name ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 339ff953f7e0c930a94a02379685a795cd2d4795 Author: Sang-Heon Jeon Date: Thu May 14 11:52:52 2026 -0400 mm/hugetlb_cma: round up per_node before logging it [ Upstream commit 8f5ce56b76303c55b78a87af996e2e0f8535f979 ] When the user requests a total hugetlb CMA size without per-node specification, hugetlb_cma_reserve() computes per_node from hugetlb_cma_size and the number of nodes that have memory per_node = DIV_ROUND_UP(hugetlb_cma_size, nodes_weight(hugetlb_bootmem_nodes)); The reservation loop later computes size = round_up(min(per_node, hugetlb_cma_size - reserved), PAGE_SIZE << order); So the actually reserved per_node size is multiple of (PAGE_SIZE << order), but the logged per_node is not rounded up, so it may be smaller than the actual reserved size. For example, as the existing comment describes, if a 3 GB area is requested on a machine with 4 NUMA nodes that have memory, 1 GB is allocated on the first three nodes, but the printed log is hugetlb_cma: reserve 3072 MiB, up to 768 MiB per node Round per_node up to (PAGE_SIZE << order) before logging so that the printed log always matches the actual reserved size. No functional change to the actual reservation size, as the following case analysis shows 1. remaining (hugetlb_cma_size - reserved) >= rounded per_node - AS-IS: min() picks unrounded per_node; round_up() returns rounded per_node - TO-BE: min() picks rounded per_node; round_up() returns rounded per_node (no-op) 2. remaining < unrounded per_node - AS-IS: min() picks remaining; round_up() returns round_up(remaining) - TO-BE: min() picks remaining; round_up() returns round_up(remaining) 3. unrounded per_node <= remaining < rounded per_node - AS-IS: min() picks unrounded per_node; round_up() returns rounded per_node - TO-BE: min() picks remaining; round_up() returns round_up(remaining) equals rounded per_node Link: https://lore.kernel.org/20260422143353.852257-1-ekffu200098@gmail.com Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma") # 5.7 Signed-off-by: Sang-Heon Jeon Reviewed-by: Muchun Song Cc: David Hildenbrand Cc: Oscar Salvador Cc: Signed-off-by: Andrew Morton [ applied the one-line `round_up` to `mm/hugetlb.c` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 13508c60ef3884555a1144ad43d1d10bef04c35b Author: Johan Hovold Date: Thu May 14 08:41:24 2026 -0400 spi: uniphier: fix controller deregistration [ Upstream commit 0245435f777264ac45945ed2f325dd095a41d1af ] Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind. Note that clocks were also disabled before the recent commit fdca270f8f87 ("spi: uniphier: Simplify clock handling with devm_clk_get_enabled()"). Fixes: 5ba155a4d4cc ("spi: add SPI controller driver for UniPhier SoC") Cc: stable@vger.kernel.org # 4.19 Cc: Keiji Hayashibara Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-25-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_*_controller/host APIs to spi_*_master/master aliases and kept the pre-existing clk_disable_unprepare() after unregister ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 350de10c4923f074eabcaa9ed7a57f83694d9d52 Author: Johan Hovold Date: Thu May 14 07:58:49 2026 -0400 spi: tegra20-sflash: fix controller deregistration [ Upstream commit ad7310e983327f939dd6c4e801eab13238992572 ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: f12f7318c44a ("spi: tegra20-sflash: use devm_spi_register_master()") Cc: stable@vger.kernel.org # 3.13 Cc: Jingoo Han Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-23-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller/host APIs to spi_master/master equivalents and switched devm_spi_register_master to spi_register_master ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 241e46a9193a1652e4f989fad5bf81fb580a4487 Author: Johan Hovold Date: Thu May 14 07:58:05 2026 -0400 spi: tegra114: fix controller deregistration [ Upstream commit 9c9c27ff2058142d8f800de3186d6864184958de ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: 5c8096439600 ("spi: tegra114: use devm_spi_register_master()") Cc: stable@vger.kernel.org # 3.13 Cc: Jingoo Han Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-22-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller/host APIs to spi_master/master equivalents and placed spi_master_put() before the existing return 0 in remove ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3ef5e323e31fbfe435da26a64d871c2375783215 Author: Johan Hovold Date: Thu May 14 00:14:12 2026 -0400 spi: sun6i: fix controller deregistration [ Upstream commit d874a1c33aee0d88fb4ba2f8aeadaa9f1965209a ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: 3558fe900e8a ("spi: sunxi: Add Allwinner A31 SPI controller driver") Cc: stable@vger.kernel.org # 3.15 Cc: Maxime Ripard Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-20-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller APIs to spi_master equivalents and kept int return type for sun6i_spi_remove ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ddeb2582d49b592e0d3c90875ddc43717b45eb90 Author: Johan Hovold Date: Wed May 13 23:09:55 2026 -0400 spi: zynq-qspi: fix controller deregistration [ Upstream commit c9c012706c9fa8ca6d129a9161caf92ab625a3fd ] Make sure to deregister the controller before disabling it during driver unbind. Note that clocks were also disabled before the recent commit 1f8fd9490e31 ("spi: zynq-qspi: Simplify clock handling with devm_clk_get_enabled()"). Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller") Cc: stable@vger.kernel.org # 5.2: 8eb2fd00f65a Cc: stable@vger.kernel.org # 5.2 Cc: Naga Sureshkumar Relli Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-27-johan@kernel.org Signed-off-by: Mark Brown [ kept int-returning remove() with manual clk_disable_unprepare() calls and routed probe error through existing clk_dis_all cascade instead of upstream's remove_ctlr label ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 83568b18fc85a1f4d4981282f975a894aab2280a Author: Johan Hovold Date: Wed May 13 15:34:14 2026 -0400 spi: ti-qspi: fix controller deregistration [ Upstream commit 0c18a1bacbb1d8b8aa34d3d004a2cb8226c8b1ea ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Note that the controller is suspended before disabling and releasing resources since commit 3ac066e2227c ("spi: spi-ti-qspi: Suspend the queue before removing the device") which avoids issues like unclocked accesses but prevents SPI device drivers from doing I/O during deregistration. Fixes: 3b3a80019ff1 ("spi: ti-qspi: one only one interrupt handler") Cc: stable@vger.kernel.org # 3.13 Cc: Sebastian Andrzej Siewior Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-24-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller_* API calls to legacy spi_master_* equivalents and qspi->host to qspi->master ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit f6c80082b4132a38d39326730abaedfe844847b8 Author: Uwe Kleine-König Date: Wed May 13 15:34:13 2026 -0400 spi: spi-ti-qspi: Convert to platform remove callback returning void [ Upstream commit 2f2802d1a59d79a3d00cb429841db502c2bbc3df ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Add an error message to the error path that returned an error before to replace the core's error message with more information. Apart from the different wording of the error message, this patch doesn't introduce a semantic difference. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231105172649.3738556-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown Stable-dep-of: 0c18a1bacbb1 ("spi: ti-qspi: fix controller deregistration") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 90bffa1e45147c23496c1ec00fbd1c1913999069 Author: Johan Hovold Date: Wed May 13 14:20:50 2026 -0400 spi: sun4i: fix controller deregistration [ Upstream commit 42108a2f03e0fdeabe9d02d085bdb058baa1189f ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: b5f6517948cc ("spi: sunxi: Add Allwinner A10 SPI controller driver") Cc: stable@vger.kernel.org # 3.15 Cc: Maxime Ripard Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-19-johan@kernel.org Signed-off-by: Mark Brown [ renamed `host`/`spi_controller` to `master`/`spi_master` and kept `int` return type with `return 0` in remove ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 91bd3c49822f1d020c926d013c3359a398cae0d8 Author: Johan Hovold Date: Wed May 13 14:20:37 2026 -0400 spi: syncuacer: fix controller deregistration [ Upstream commit 75d849c3452e9611de031db45b3149ba9a99035f ] Make sure to deregister the controller before disabling underlying resources like clocks during driver unbind. Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform") Cc: stable@vger.kernel.org # 5.3 Cc: Masahisa Kojima Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260410081757.503099-21-johan@kernel.org Signed-off-by: Mark Brown [ renamed spi_controller/host to spi_master/master and kept int return type with `return 0;` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3943fcad7694a7d0b15aeabe7d3cc2a2eb8e92e8 Author: Michal Kosiorek Date: Wed May 13 13:44:48 2026 -0400 xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete [ Upstream commit 14acf9652e5690de3c7486c6db5fb8dafd0a32a3 ] KASAN reproduces a slab-use-after-free in __xfrm_state_delete()'s hlist_del_rcu calls under syzkaller load on linux-6.12.y stable (reproduced on 6.12.47, also reachable via the same code path on torvalds/master and on the ipsec tree). Nine unique signatures cluster in the xfrm_state lifecycle, the load-bearing one being: BUG: KASAN: slab-use-after-free in __hlist_del include/linux/list.h:990 [inline] BUG: KASAN: slab-use-after-free in hlist_del_rcu include/linux/rculist.h:516 [inline] BUG: KASAN: slab-use-after-free in __xfrm_state_delete net/xfrm/xfrm_state.c Write of size 8 at addr ffff8881198bcb70 by task kworker/u8:9/435 Workqueue: netns cleanup_net Call Trace: __hlist_del / hlist_del_rcu __xfrm_state_delete xfrm_state_delete xfrm_state_flush xfrm_state_fini ops_exit_list cleanup_net The other observed signatures hit the same slab object from __xfrm_state_lookup, xfrm_alloc_spi, __xfrm_state_insert and an OOB write variant of __xfrm_state_delete, all on the byseq/byspi hash chains. __xfrm_state_delete() guards its byseq and byspi unhashes with value-based predicates: if (x->km.seq) hlist_del_rcu(&x->byseq); if (x->id.spi) hlist_del_rcu(&x->byspi); while everywhere else in the file (e.g. state_cache, state_cache_input) the safer hlist_unhashed() check is used. xfrm_alloc_spi() sets x->id.spi = newspi inside xfrm_state_lock and then immediately inserts into byspi, but a path that observes x->id.spi != 0 outside of xfrm_state_lock can still skip-or-hit the byspi unhash inconsistently with whether x is actually on the list. The same holds for x->km.seq versus byseq, and the bydst/bysrc unhashes have no predicate at all, so a second __xfrm_state_delete() on the same object writes through LIST_POISON pprev. The defensive change here: - Use hlist_del_init_rcu() instead of hlist_del_rcu() on bydst, bysrc, byseq and byspi so a second deletion is a no-op rather than a write through LIST_POISON pprev. The byseq/byspi nodes are already initialised in xfrm_state_alloc(). - Test hlist_unhashed() rather than the value predicate for byseq/byspi, so the unhash decision tracks list state rather than mutable scalar fields. Empirical verification: applied this patch on top of v6.12.47, rebuilt, and re-ran the same syzkaller harness for 1h16m on a previously-crashy configuration that produced ~100 hits each of slab-use-after-free Read in xfrm_alloc_spi / Read in __xfrm_state_lookup / Write in __xfrm_state_delete. After the patch, 7.1M execs across 32 VMs at ~1550 exec/sec produced zero xfrm_state UAF/OOB hits. /proc/slabinfo confirms the xfrm_state slab is actively allocated and freed during the run (~143 KiB resident), so the fuzzer is still exercising those code paths -- they just no longer crash. Reproduction: - Linux 6.12.47 x86_64 + KASAN_GENERIC + KASAN_INLINE + KCOV - syzkaller @ 746545b8b1e4c3a128db8652b340d3df90ce61db - 32 QEMU/KVM VMs x 2 vCPU on AWS c5.metal bare metal - 9 unique signatures collected in ~9h, all within xfrm_state lifecycle Fixes: fe9f1d8779cb ("xfrm: add state hashtable keyed by seq") Fixes: 7b4dc3600e48 ("[XFRM]: Do not add a state whose SPI is zero to the SPI hash.") Reported-by: Michal Kosiorek Tested-by: Michal Kosiorek Cc: stable@vger.kernel.org Signed-off-by: Michal Kosiorek Signed-off-by: Steffen Klassert [ dropped state_cache/state_cache_input unhash hunks and xfrm_nat_keepalive_state_updated() call ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ec406c26c97594124e79d14516b729a8d5dced62 Author: Michael Bommarito Date: Wed May 13 13:09:42 2026 -0400 xfrm: ah: account for ESN high bits in async callbacks [ Upstream commit ec54093e6a8f87e800bb6aa15eb7fc1e33faa524 ] AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine. Fixes: d4d573d0334d ("{IPv4,xfrm} Add ESN support for AH egress part") Fixes: d8b2a8600b0e ("{IPv4,xfrm} Add ESN support for AH ingress part") Fixes: 26dd70c3fad3 ("{IPv6,xfrm} Add ESN support for AH egress part") Fixes: 8d6da6f32557 ("{IPv6,xfrm} Add ESN support for AH ingress part") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5-4 Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ef09fb57597309642d877234bfb8d4ec8412805e Author: Eric Biggers Date: Wed May 13 13:09:41 2026 -0400 net: ipv6: stop checking crypto_ahash_alignmask [ Upstream commit 0a6bfaa0e695facb072f2fedfb55df37c4483b50 ] Now that the alignmask for ahash and shash algorithms is always 0, crypto_ahash_alignmask() always returns 0 and will be removed. In preparation for this, stop checking crypto_ahash_alignmask() in ah6.c. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Stable-dep-of: ec54093e6a8f ("xfrm: ah: account for ESN high bits in async callbacks") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3c27fc51603d7f9066b356bc4059f2dbe66d5dce Author: Eric Biggers Date: Wed May 13 13:09:40 2026 -0400 net: ipv4: stop checking crypto_ahash_alignmask [ Upstream commit e77f5dd701381cef35b9ea8b6dea6e62c8a7f9f3 ] Now that the alignmask for ahash and shash algorithms is always 0, crypto_ahash_alignmask() always returns 0 and will be removed. In preparation for this, stop checking crypto_ahash_alignmask() in ah4.c. Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Stable-dep-of: ec54093e6a8f ("xfrm: ah: account for ESN high bits in async callbacks") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e589ee5dcc023aa2703584fa58cf4cc12aeb4f4a Author: Selvarasu Ganesan Date: Wed May 13 09:53:34 2026 -0400 usb: dwc3: Move GUID programming after PHY initialization [ Upstream commit aad35f9c926ec220b0742af1ada45666ae667956 ] The Linux Version Code is currently written to the GUID register before PHY initialization. Certain PHY implementations (such as Synopsys eUSB PHY performing link_sw_reset) clear the GUID register to its default value during initialization, causing the kernel version information to be lost. Move the GUID register programming to occur after PHY initialization completes to ensure the Linux version information persists. Fixes: fa0ea13e9f1c ("usb: dwc3: core: write LINUX_VERSION_CODE to our GUID register") Cc: stable Reported-by: Pritam Manohar Sutar Signed-off-by: Selvarasu Ganesan Acked-by: Thinh Nguyen Link: https://patch.msgid.link/20260417063314.2359-1-selvarasu.g@samsung.com Signed-off-by: Greg Kroah-Hartman [ adapted dwc3_writel(dwc, ...) to dwc3_writel(dwc->regs, ...) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit df2e90d6a9955510f24f1dada78cfc439fd9fa88 Author: Marek Szyprowski Date: Wed May 13 09:11:14 2026 -0400 wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task [ Upstream commit c623b63580880cc742255eaed3d79804c1b91143 ] Watchdog task might end between send_sig() and kthread_stop() calls, what results in the use-after-free issue. Fix this by increasing watchdog task reference count before calling send_sig() and dropping it by switching to kthread_stop_put(). Cc: stable@vger.kernel.org Fixes: 373c83a801f1 ("brcmfmac: stop watchdog before detach and free everything") Fixes: a9ffda88be74 ("brcm80211: fmac: abstract bus_stop interface function pointer") Signed-off-by: Marek Szyprowski Acked-by: Arend van Spriel Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com Signed-off-by: Johannes Berg [ replaced kthread_stop_put() with open-coded kthread_stop() + put_task_struct() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c21c0ef864db3e26138f9b1435f577c4c51147b2 Author: Amit Sunil Dhamne Date: Wed May 13 08:48:25 2026 -0400 usb: typec: tcpm: reset internal port states on soft reset AMS [ Upstream commit 2909f0d4994fb4306bf116df5ccee797791fce2c ] Reset internal port states (such as vdm_sm_running and explicit_contract) on soft reset AMS as the port needs to negotiate a new contract. The consequence of leaving the states in as-is cond are as follows: * port is in SRC power role and an explicit contract is negotiated with the port partner (in sink role) * port partner sends a Soft Reset AMS while VDM State Machine is running * port accepts the Soft Reset request and the port advertises src caps * port partner sends a Request message but since the explicit_contract and vdm_sm_running are true from previous negotiation, the port ends up sending Soft Reset instead of Accept msg. Stub Log: [ 203.653942] AMS DISCOVER_IDENTITY start [ 203.653947] PD TX, header: 0x176f [ 203.655901] PD TX complete, status: 0 [ 203.657470] PD RX, header: 0x124f [1] [ 203.657477] Rx VDM cmd 0xff008081 type 2 cmd 1 len 1 [ 203.657482] AMS DISCOVER_IDENTITY finished [ 203.657484] cc:=4 [ 204.155698] PD RX, header: 0x144f [1] [ 204.155718] Rx VDM cmd 0xeeee8001 type 0 cmd 1 len 1 [ 204.155741] PD TX, header: 0x196f [ 204.157622] PD TX complete, status: 0 [ 204.160060] PD RX, header: 0x4d [1] [ 204.160066] state change SRC_READY -> SOFT_RESET [rev2 SOFT_RESET_AMS] [ 204.160076] PD TX, header: 0x163 [ 204.162486] PD TX complete, status: 0 [ 204.162832] AMS SOFT_RESET_AMS finished [ 204.162840] cc:=4 [ 204.162891] AMS POWER_NEGOTIATION start [ 204.162896] state change SOFT_RESET -> AMS_START [rev2 POWER_NEGOTIATION] [ 204.162908] state change AMS_START -> SRC_SEND_CAPABILITIES [rev2 POWER_NEGOTIATION] [ 204.162913] PD TX, header: 0x1361 [ 204.165529] PD TX complete, status: 0 [ 204.165571] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 60 ms [rev2 POWER_NEGOTIATION] [ 204.166996] PD RX, header: 0x1242 [1] [ 204.167009] state change SRC_SEND_CAPABILITIES -> SRC_SOFT_RESET_WAIT_SNK_TX [rev2 POWER_NEGOTIATION] [ 204.167019] AMS POWER_NEGOTIATION finished [ 204.167020] cc:=4 [ 204.167083] AMS SOFT_RESET_AMS start [ 204.167086] state change SRC_SOFT_RESET_WAIT_SNK_TX -> SOFT_RESET_SEND [rev2 SOFT_RESET_AMS] [ 204.167092] PD TX, header: 0x16d [ 204.168824] PD TX complete, status: 0 [ 204.168854] pending state change SOFT_RESET_SEND -> HARD_RESET_SEND @ 60 ms [rev2 SOFT_RESET_AMS] [ 204.171876] PD RX, header: 0x43 [1] [ 204.171879] AMS SOFT_RESET_AMS finished This causes COMMON.PROC.PD.11.2 check failure for TEST.PD.VDM.SRC.2_Rev2Src test on the PD compliance tester. Signed-off-by: Amit Sunil Dhamne Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running") Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable Reviewed-by: Badhri Jagan Sridharan Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260414-fix-soft-reset-v1-1-01d7cb9764e2@google.com Signed-off-by: Greg Kroah-Hartman [ kept `tcpm_pd_send_control(port, PD_CTRL_ACCEPT)` call unchanged ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit b8603d9ae6c9087662b098619996bc4a8064319d Author: Michael Bommarito Date: Sun Apr 19 20:11:31 2026 -0400 smb: client: validate the whole DACL before rewriting it in cifsacl commit 0a8cf165566ba55a39fd0f4de172119dd646d39a upstream. build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Steve French [ renamed smb_acl/smb_ace/smb_sid/smb_ntsd to cifs_* and widened num_aces from u16 to u32 for 6.1's __le32 field ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4f1756d043e56ea2e9a6c858fb290a0cf6fc2251 Author: David Carlier Date: Mon May 11 04:57:26 2026 -0400 tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() [ Upstream commit fad217e16fded7f3c09f8637b0f6a224d58b5f2e ] When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration. Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail") Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com Signed-off-by: David Carlier Signed-off-by: Steven Rostedt (Google) [ changed `tp->ext->unregfunc` to `tp->unregfunc` to match older struct layout ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cd849c07b8d706425e60a4dfcef54b7b67c967ce Author: Thorsten Blum Date: Sun May 10 11:10:10 2026 -0400 crypto: caam - guard HMAC key hex dumps in hash_digest_key [ Upstream commit 177730a273b18e195263ed953853273e901b5064 ] Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in hash_digest_key() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled. Fixes: 045e36780f11 ("crypto: caam - ahash hmac support") Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a59ac34ee8eb4e5d17afe01363fe8bf4f8c2de1d Author: Thorsten Blum Date: Sun May 10 11:10:09 2026 -0400 printk: add print_hex_dump_devel() [ Upstream commit d134feeb5df33fbf77f482f52a366a44642dba09 ] Add print_hex_dump_devel() as the hex dump equivalent of pr_devel(), which emits output only when DEBUG is enabled, but keeps call sites compiled otherwise. Suggested-by: Herbert Xu Signed-off-by: Thorsten Blum Reviewed-by: John Ogness Signed-off-by: Herbert Xu Stable-dep-of: 177730a273b1 ("crypto: caam - guard HMAC key hex dumps in hash_digest_key") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 345c24b2bcf0923dfae1ab41497351c68214ff76 Author: Cássio Gabriel Date: Sun May 10 09:15:57 2026 -0400 ALSA: aloop: Fix peer runtime UAF during format-change stop [ Upstream commit e5c33cdc6f402eab8abd36ecf436b22c9d3a8aff ] loopback_check_format() may stop the capture side when playback starts with parameters that no longer match a running capture stream. Commit 826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved the peer lookup under cable->lock, but the actual snd_pcm_stop() still runs after dropping that lock. A concurrent close can clear the capture entry from cable->streams[] and detach or free its runtime while the playback trigger path still holds a stale peer substream pointer. Keep a per-cable count of in-flight peer stops before dropping cable->lock, and make free_cable() wait for those stops before detaching the runtime. This preserves the existing behavior while making the peer runtime lifetime explicit. Reported-by: syzbot+8fa95c41eafbc9d2ff6f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8fa95c41eafbc9d2ff6f Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback") Cc: stable@vger.kernel.org Suggested-by: Takashi Iwai Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260424-alsa-aloop-peer-stop-uaf-v2-1-94e68101db8a@gmail.com Signed-off-by: Takashi Iwai [ collapsed inc/snd_pcm_stop/dec into the existing inline call site and used spin_lock_irq/unlock_irq instead of scoped_guard ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 73b47a1f06dee5e61b00dee5227d75d3f1f6d977 Author: Max Kellermann Date: Sat May 9 11:22:35 2026 -0400 ceph: only d_add() negative dentries when they are unhashed [ Upstream commit 803447f93d75ab6e40c85e6d12b5630d281d70d6 ] Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives. Cc: stable@vger.kernel.org Fixes: 2817b000b02c ("ceph: directory operations") Signed-off-by: Max Kellermann Reviewed-by: Viacheslav Dubeyko Signed-off-by: Ilya Dryomov [ kept existing dout() debug call instead of upstream's doutc() form when adding the d_unhashed() guard around d_add() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 778acd52e9497806fbd2cea7f770c41d6850fc48 Author: Junrui Luo Date: Sat May 9 08:49:57 2026 -0400 erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() [ Upstream commit 21e161de2dc660b1bb70ef5b156ab8e6e1cca3ab ] Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1 Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Reviewed-by: Gao Xiang Signed-off-by: Gao Xiang [ renamed `rq->outpages`/`rq->inpages` to `nrpages_out`/`nrpages_in` and inverted the check to `nrpages_out < nrpages_in` on the existing `goto docopy` chain ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit cb2e41e87a2893345859440017e7178bf7a4c70d Author: Johan Hovold Date: Fri May 8 22:04:53 2026 -0400 can: ucan: fix devres lifetime [ Upstream commit fed4626501c871890da287bec62a96e52da1af89 ] USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the control message buffer lifetime so that it is released on driver unbind. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable@vger.kernel.org # 4.19 Cc: Jakob Unterwurzacher Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260327104520.1310158-1-johan@kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3a429c9d29be34d18b4dfa7b52f4c9c9a5d41986 Author: Julia Lawall Date: Fri May 8 22:04:52 2026 -0400 can: ucan: fix typos in comments [ Upstream commit c34983c94166689358372d4af8d5def57752860c ] Various spelling mistakes in comments. Detected with the help of Coccinelle. Link: https://lore.kernel.org/all/20220314115354.144023-28-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall Acked-by: Marc Kleine-Budde Signed-off-by: Marc Kleine-Budde Stable-dep-of: fed4626501c8 ("can: ucan: fix devres lifetime") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d28311539ac9f65e29308ea219ecaa48aa5e76e5 Author: Shuvam Pandey Date: Fri May 8 21:33:20 2026 -0400 Bluetooth: hci_event: fix potential UAF in SSP passkey handlers [ Upstream commit 85fa3512048793076eef658f66489112dcc91993 ] hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path. Fixes: 92a25256f142 ("Bluetooth: mgmt: Implement support for passkey notification") Cc: stable@vger.kernel.org Signed-off-by: Shuvam Pandey Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6499c9c8ec437a369e7e221dad91f6122b50759d Author: Zilin Guan Date: Fri May 8 21:12:59 2026 -0400 hfsplus: fix held lock freed on hfsplus_fill_super() [ Upstream commit 90c500e4fd83fa33c09bc7ee23b6d9cc487ac733 ] hfsplus_fill_super() calls hfs_find_init() to initialize a search structure, which acquires tree->tree_lock. If the subsequent call to hfsplus_cat_build_key() fails, the function jumps to the out_put_root error label without releasing the lock. The later cleanup path then frees the tree data structure with the lock still held, triggering a held lock freed warning. Fix this by adding the missing hfs_find_exit(&fd) call before jumping to the out_put_root error label. This ensures that tree->tree_lock is properly released on the error path. The bug was originally detected on v6.13-rc1 using an experimental static analysis tool we are developing, and we have verified that the issue persists in the latest mainline kernel. The tool is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available. We confirmed the bug by runtime testing under QEMU with x86_64 defconfig, lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we used GDB to dynamically shrink the max_unistr_len parameter to 1 before hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and exercises the faulty error path. The following warning was observed during mount: ========================= WARNING: held lock freed! 7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted ------------------------- mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there! ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 2 locks held by mount/174: #0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40 #1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0 stack backtrace: CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: dump_stack_lvl+0x82/0xd0 debug_check_no_locks_freed+0x13a/0x180 kfree+0x16b/0x510 ? hfsplus_fill_super+0xcb4/0x18a0 hfsplus_fill_super+0xcb4/0x18a0 ? __pfx_hfsplus_fill_super+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x65f/0xc30 ? srso_return_thunk+0x5/0x5f ? pointer+0x4ce/0xbf0 ? trace_contention_end+0x11c/0x150 ? __pfx_pointer+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? bdev_open+0x79b/0xc30 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? vsnprintf+0x6da/0x1270 ? srso_return_thunk+0x5/0x5f ? __mutex_unlock_slowpath+0x157/0x740 ? __pfx_vsnprintf+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? mark_held_locks+0x49/0x80 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? irqentry_exit+0x17b/0x5e0 ? trace_irq_disable.constprop.0+0x116/0x150 ? __pfx_hfsplus_fill_super+0x10/0x10 ? __pfx_hfsplus_fill_super+0x10/0x10 get_tree_bdev_flags+0x302/0x580 ? __pfx_get_tree_bdev_flags+0x10/0x10 ? vfs_parse_fs_qstr+0x129/0x1a0 ? __pfx_vfs_parse_fs_qstr+0x3/0x10 vfs_get_tree+0x89/0x320 fc_mount+0x10/0x1d0 path_mount+0x5c5/0x21c0 ? __pfx_path_mount+0x10/0x10 ? trace_irq_enable.constprop.0+0x116/0x150 ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? kmem_cache_free+0x307/0x540 ? user_path_at+0x51/0x60 ? __x64_sys_mount+0x212/0x280 ? srso_return_thunk+0x5/0x5f __x64_sys_mount+0x212/0x280 ? __pfx___x64_sys_mount+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? trace_irq_enable.constprop.0+0x116/0x150 ? srso_return_thunk+0x5/0x5f do_syscall_64+0x111/0x680 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffacad55eae Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8 RSP: 002b:00007fff1ab55718 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffacad55eae RDX: 000055740c64e5b0 RSI: 000055740c64e630 RDI: 000055740c651ab0 RBP: 000055740c64e380 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000055740c64e5b0 R14: 000055740c651ab0 R15: 000055740c64e380 After applying this patch, the warning no longer appears. Fixes: 89ac9b4d3d1a ("hfsplus: fix longname handling") CC: stable@vger.kernel.org Signed-off-by: Zilin Guan Reviewed-by: Viacheslav Dubeyko Tested-by: Viacheslav Dubeyko Signed-off-by: Viacheslav Dubeyko Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8be69532e399eec9d9d990f6958b4ff2383b19b3 Author: Deepanshu Kartikey Date: Fri May 8 21:12:58 2026 -0400 hfsplus: fix uninit-value by validating catalog record size [ Upstream commit b6b592275aeff184aa82fcf6abccd833fb71b393 ] Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering the KMSAN warning when the uninitialized bytes are used as array indices in case_fold(). Fix by introducing hfsplus_brec_read_cat() wrapper that: 1. Calls hfs_brec_read() to read the data 2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length) 3. Returns -EIO if size doesn't match expected For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading nodeName.length to avoid reading uninitialized data at call sites that don't zero-initialize the entry structure. Also initialize the tmp variable in hfsplus_find_cat() as defensive programming to ensure no uninitialized data even if validation is bypassed. Reported-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d80abb5b890d39261e72 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com Reviewed-by: Viacheslav Dubeyko Tested-by: Viacheslav Dubeyko Suggested-by: Charalampos Mitrodimas Link: https://lore.kernel.org/all/20260120051114.1281285-1-kartikey406@gmail.com/ [v1] Link: https://lore.kernel.org/all/20260121063109.1830263-1-kartikey406@gmail.com/ [v2] Link: https://lore.kernel.org/all/20260212014233.2422046-1-kartikey406@gmail.com/ [v3] Link: https://lore.kernel.org/all/20260214002100.436125-1-kartikey406@gmail.com/T/ [v4] Link: https://lore.kernel.org/all/20260221061626.15853-1-kartikey406@gmail.com/T/ [v5] Signed-off-by: Deepanshu Kartikey Signed-off-by: Viacheslav Dubeyko Link: https://lore.kernel.org/r/20260307010302.41547-1-kartikey406@gmail.com Signed-off-by: Viacheslav Dubeyko Stable-dep-of: 90c500e4fd83 ("hfsplus: fix held lock freed on hfsplus_fill_super()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 68013a9bd4c01acd42073715f00e1a1992f089ee Author: Seohyeon Maeng Date: Fri May 8 19:59:53 2026 -0400 udf: fix partition descriptor append bookkeeping [ Upstream commit 08841b06fa64d8edbd1a21ca6e613420c90cc4b8 ] Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model. Fixes: ee4af50ca94f ("udf: Fix mounting of Win7 created UDF filesystems") Cc: stable@vger.kernel.org Signed-off-by: Seohyeon Maeng Link: https://patch.msgid.link/20260310081652.21220-1-bioloidgp@gmail.com Signed-off-by: Jan Kara [ replaced kzalloc_objs() helper with equivalent kcalloc() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a6c1e6014df1b509c4a26823c44f04279be3fea1 Author: Sanjaikumar V S Date: Fri May 8 17:18:16 2026 -0400 mtd: spi-nor: sst: Fix write enable before AAI sequence [ Upstream commit a0f64241d3566a49c0a9b33ba7ae458ae22003a9 ] When writing to SST flash starting at an odd address, a single byte is first programmed using the byte program (BP) command. After this operation completes, the flash hardware automatically clears the Write Enable Latch (WEL) bit. If an AAI (Auto Address Increment) word program sequence follows, it requires WEL to be set. Without re-enabling writes, the AAI sequence fails. Add spi_nor_write_enable() after the odd-address byte program when more data needs to be written. Use a local boolean for clarity. Fixes: b199489d37b2 ("mtd: spi-nor: add the framework for SPI NOR") Cc: stable@vger.kernel.org Signed-off-by: Sanjaikumar V S Tested-by: Hendrik Donner Reviewed-by: Hendrik Donner Signed-off-by: Pratyush Yadav (Google) [ kept inline `nor->program_opcode = SPINOR_OP_BP;` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 237c6759e4270a5cabc2f518467f31aaac280134 Author: Shawn Lin Date: Tue May 5 06:18:15 2026 -0400 mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration [ Upstream commit 6546a49bbe656981d99a389195560999058c89c4 ] According to the ASIC design recommendations, the clock must be disabled before operating the DLL to prevent glitches that could affect the internal digital logic. In extreme cases, failing to do so may cause the controller to malfunction completely. Adds a step to disable the clock before DLL configuration and re-enables it at the end. Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Signed-off-by: Shawn Lin Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson [ dropped HS200/HS400 block and BIT(4) line, converted the single `return` in `if (clock <= 400000)` to `goto enable_clk` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 7e1b6b281aa8c084351509b1678286bf87aaf3ef Author: Ryan Roberts Date: Tue May 5 05:49:40 2026 -0400 randomize_kstack: Maintain kstack_offset per task [ Upstream commit 37beb42560165869838e7d91724f3e629db64129 ] kstack_offset was previously maintained per-cpu, but this caused a couple of issues. So let's instead make it per-task. Issue 1: add_random_kstack_offset() and choose_random_kstack_offset() expected and required to be called with interrupts and preemption disabled so that it could manipulate per-cpu state. But arm64, loongarch and risc-v are calling them with interrupts and preemption enabled. I don't _think_ this causes any functional issues, but it's certainly unexpected and could lead to manipulating the wrong cpu's state, which could cause a minor performance degradation due to bouncing the cache lines. By maintaining the state per-task those functions can safely be called in preemptible context. Issue 2: add_random_kstack_offset() is called before executing the syscall and expands the stack using a previously chosen random offset. choose_random_kstack_offset() is called after executing the syscall and chooses and stores a new random offset for the next syscall. With per-cpu storage for this offset, an attacker could force cpu migration during the execution of the syscall and prevent the offset from being updated for the original cpu such that it is predictable for the next syscall on that cpu. By maintaining the state per-task, this problem goes away because the per-task random offset is updated after the syscall regardless of which cpu it is executing on. Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall") Closes: https://lore.kernel.org/all/dd8c37bc-795f-4c7a-9086-69e584d8ab24@arm.com/ Cc: stable@vger.kernel.org Acked-by: Mark Rutland Signed-off-by: Ryan Roberts Link: https://patch.msgid.link/20260303150840.3789438-2-ryan.roberts@arm.com Signed-off-by: Kees Cook Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 4aab89603b637a2e441b38808c4f6fe7d1184df6 Author: Thomas Zimmermann Date: Tue May 5 05:49:37 2026 -0400 fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info [ Upstream commit 9ded47ad003f09a94b6a710b5c47f4aa5ceb7429 ] Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. Signed-off-by: Thomas Zimmermann Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support") Cc: Helge Deller Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v2.6.22+ Signed-off-by: Helge Deller [ replaced `kzalloc_obj()` with `kzalloc(sizeof(*fbdefio_state), GFP_KERNEL)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a6ae4511c07b91f597e461406c6330f0d4ff810e Author: Zhengchuan Liang Date: Mon May 4 08:16:28 2026 -0400 net: bridge: use a stable FDB dst snapshot in RCU readers [ Upstream commit df4601653201de21b487c3e7fffd464790cab808 ] Local FDB entries can be rewritten in place by `fdb_delete_local()`, which updates `f->dst` to another port or to `NULL` while keeping the entry alive. Several bridge RCU readers inspect `f->dst`, including `br_fdb_fillbuf()` through the `brforward_read()` sysfs path. These readers currently load `f->dst` multiple times and can therefore observe inconsistent values across the check and later dereference. In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change `f->dst` after the NULL check and before the `port_no` dereference, leading to a NULL-ptr-deref. Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()` with `WRITE_ONCE()` so the readers and writer use matching access patterns. Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address") Cc: stable@kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Ren Wei Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni [ kept combined-flag check `(dst->flags & (BR_PROXYARP_WIFI | BR_NEIGH_SUPPRESS))` and `cb->args[2]` indexing instead of `br_is_neigh_suppress_enabled()` helper and `ctx->fdb_idx` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 823310645065bd49666e84af689fa95192819f55 Author: Manivannan Sadhasivam Date: Mon May 4 06:32:53 2026 -0400 net: qrtr: ns: Limit the total number of nodes [ Upstream commit 27d5e84e810b0849d08b9aec68e48570461ce313 ] Currently, the nameserver doesn't limit the number of nodes it handles. This can be an attack vector if a malicious client starts registering random nodes, leading to memory exhaustion. Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased. Cc: stable@vger.kernel.org Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20260409-qrtr-fix-v3-4-00a8a5ff2b51@oss.qualcomm.com Signed-off-by: Jakub Kicinski [ dropped node_count-- hunk since ctrl_cmd_bye() has no delete_node ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8a93d7ae849895d390fa2546d8856a3a81d494ec Author: Yuan Zhaoming Date: Mon May 4 04:59:28 2026 -0400 net: mctp: fix don't require received header reserved bits to be zero [ Upstream commit a663bac71a2f0b3ac6c373168ca57b2a6e6381aa ] >From the MCTP Base specification (DSP0236 v1.2.1), the first byte of the MCTP header contains a 4 bit reserved field, and 4 bit version. On our current receive path, we require those 4 reserved bits to be zero, but the 9500-8i card is non-conformant, and may set these reserved bits. DSP0236 states that the reserved bits must be written as zero, and ignored when read. While the device might not conform to the former, we should accept these message to conform to the latter. Relax our check on the MCTP version byte to allow non-zero bits in the reserved field. Fixes: 889b7da23abf ("mctp: Add initial routing framework") Signed-off-by: Yuan Zhaoming Cc: stable@vger.kernel.org Acked-by: Jeremy Kerr Link: https://patch.msgid.link/20260417141340.5306-1-yuanzhaoming901030@126.com Signed-off-by: Jakub Kicinski [ Context ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a5a454f3364877b22f0e5a165df8b3702ff96ae7 Author: Manivannan Sadhasivam Date: Mon May 4 01:39:32 2026 -0400 net: qrtr: ns: Free the node during ctrl_cmd_bye() [ Upstream commit 68efba36446a7774ea5b971257ade049272a07ac ] A node sends the BYE packet when it is about to go down. So the nameserver should advertise the removal of the node to all remote and local observers and free the node finally. But currently, the nameserver doesn't free the node memory even after processing the BYE packet. This causes the node memory to leak. Hence, remove the node from Xarray list and free the node memory during both success and failure case of ctrl_cmd_bye(). Cc: stable@vger.kernel.org Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20260409-qrtr-fix-v3-3-00a8a5ff2b51@oss.qualcomm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9524198e7a12fb40bbf85403d1893c95166e5b5d Author: Vignesh Viswanathan Date: Mon May 4 01:39:31 2026 -0400 net: qrtr: ns: Change servers radix tree to xarray [ Upstream commit 608a147a88728f84bbd2efdde3d4984339f1d872 ] There is a use after free scenario while iterating through the servers radix tree despite the ns being a single threaded process. This can happen when the radix tree APIs are not synchronized with the rcu_read_lock() APIs. Convert the radix tree for servers to xarray to take advantage of the built in rcu lock usage provided by xarray. Signed-off-by: Chris Lew Signed-off-by: Vignesh Viswanathan Reviewed-by: Simon Horman Signed-off-by: David S. Miller Stable-dep-of: 68efba36446a ("net: qrtr: ns: Free the node during ctrl_cmd_bye()") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 91cb30b6bb1880ba0748ca059bef50b8ac13793d Author: Manivannan Sadhasivam Date: Mon May 4 01:05:10 2026 -0400 net: qrtr: ns: Limit the maximum number of lookups [ Upstream commit 5640227d9a21c6a8be249a10677b832e7f40dc55 ] Current code does no bound checking on the number of lookups a client can perform. Though the code restricts the lookups to local clients, there is still a possibility of a malicious local client sending a flood of NEW_LOOKUP messages over the same socket. Fix this issue by limiting the maximum number of lookups to 64 globally. Since the nameserver allows only atmost one local observer, this global lookup count will ensure that the lookups stay within the limit. Note that, limit of 64 is chosen based on the current platform requirements. If requirement changes in the future, this limit can be increased. Cc: stable@vger.kernel.org Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20260409-qrtr-fix-v3-2-00a8a5ff2b51@oss.qualcomm.com Signed-off-by: Jakub Kicinski [ adapted comment block to only mention QRTR_NS_MAX_LOOKUPS and kept kzalloc() instead of kzalloc_obj() due to missing prerequisite commits ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 358fc03cd96b2bd0469f42422614acb82c74e08f Author: Takashi Iwai Date: Sun May 3 06:58:21 2026 -0400 ALSA: core: Fix potential data race at fasync handling [ Upstream commit 8146cd333d235ed32d48bb803fdf743472d7c783 ] In snd_fasync_work_fn(), which is the offload work for traversing and processing the pending fasync list, the call of kill_fasync() is done outside the snd_fasync_lock for avoiding deadlocks. The problem is that its the references of fasync->on, fasync->signal and fasync->poll are done there also outside the lock. Since these may be modified by snd_kill_fasync() call concurrently from other process, inconsistent values might be passed to kill_fasync(). Although there shouldn't be critical UAF, it's still better to be addressed. This patch moves the kill_fasync() argument evaluations inside the snd_fasync_lock for avoiding the data races above. The handling in fasync->on flag is optimized in the loop to skip directly. Also, for more clarity, snd_fasync_free() takes the lock and unlink the pending entry more directly instead of clearing fasync->on flag. Reported-by: Jake Lamberson Fixes: ef34a0ae7a26 ("ALSA: core: Add async signal helpers") Cc: Link: https://patch.msgid.link/20260420061721.3253644-1-tiwai@suse.de Signed-off-by: Takashi Iwai [ replaced scoped_guard(spinlock_irq, &snd_fasync_lock) with explicit spin_lock_irq()/spin_unlock_irq() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 64d9b734b6fe1e2420af4f832203e420dae6f259 Author: Joseph Salisbury Date: Sat May 2 20:26:45 2026 -0400 sched: Use u64 for bandwidth ratio calculations [ Upstream commit c6e80201e057dfb7253385e60bf541121bf5dc33 ] to_ratio() computes BW_SHIFT-scaled bandwidth ratios from u64 period and runtime values, but it returns unsigned long. tg_rt_schedulable() also stores the current group limit and the accumulated child sum in unsigned long. On 32-bit builds, large bandwidth ratios can be truncated and the RT group sum can wrap when enough siblings are present. That can let an overcommitted RT hierarchy pass the schedulability check, and it also narrows the helper result for other callers. Return u64 from to_ratio() and use u64 for the RT group totals so bandwidth ratios are preserved and compared at full width on both 32-bit and 64-bit builds. Fixes: b40b2e8eb521 ("sched: rt: multi level group constraints") Assisted-by: Codex:GPT-5 Signed-off-by: Joseph Salisbury Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260403210014.2713404-1-joseph.salisbury@oracle.com [ dropped `extern` keyword from `to_ratio()` declaration ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 81f0fb813e4bf28b3ca28dc218938a32eb48f740 Author: Oliver Neukum Date: Fri May 1 22:12:21 2026 -0400 media: rc: igorplugusb: heed coherency rules [ Upstream commit eac69475b01fe1e861dfe3960b57fa95671c132e ] In a control request, the USB request structure can be subject to DMA on some HCs. Hence it must obey the rules for DMA coherency. Allocate it separately. Fixes: b1c97193c6437 ("[media] rc: port IgorPlug-USB to rc-core") Cc: stable@vger.kernel.org Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Hans Verkuil [ replaced kzalloc_obj() with kzalloc(sizeof(*ir->request), GFP_KERNEL) ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit aa16dca1b062355181ef215229eeac249d7c0d61 Author: Gao Xiang Date: Fri May 1 14:48:48 2026 -0400 erofs: fix the out-of-bounds nameoff handling for trailing dirents [ Upstream commit d18a3b5d337fa412a38e776e6b4b857a58836575 ] Currently we already have boundary-checks for nameoffs, but the trailing dirents are special since the namelens are calculated with strnlen() with unchecked nameoffs. If a crafted EROFS has a trailing dirent with nameoff >= maxsize, maxsize - nameoff can underflow, causing strnlen() to read past the directory block. nameoff0 should also be verified to be a multiple of `sizeof(struct erofs_dirent)` as well [1]. [1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations") Fixes: 33bac912840f ("staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()") Reported-by: Yuhao Jiang Reported-by: Junrui Luo Closes: https://lore.kernel.org/r/A0FD7E0F-7558-49B0-8BC8-EB1ECDB2479A@outlook.com Cc: stable@vger.kernel.org Signed-off-by: Gao Xiang Reviewed-by: Chao Yu [ replaced upstream `bsz` with `PAGE_SIZE` and `sizeof(*de)` with `sizeof(struct erofs_dirent)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d17c282163b70cbd666d056790bf6eeb5f085bdc Author: Thorsten Blum Date: Fri May 1 14:35:58 2026 -0400 ALSA: aoa: Skip devices with no codecs in i2sbus_resume() [ Upstream commit fd7df93013c5118812e63a52635dc6c3a805a1de ] In i2sbus_resume(), skip devices with an empty codec list, which avoids using an uninitialized 'sysclock_factor' in the 32-bit format path in i2sbus_pcm_prepare(). In i2sbus_pcm_prepare(), replace two list_for_each_entry() loops with a single list_first_entry() now that the codec list is guaranteed to be non-empty by all callers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Link: https://patch.msgid.link/20260310102921.210109-3-thorsten.blum@linux.dev Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 6ed4e39cb6eac644bcc47352a32d46ff80674f70 Author: Oliver Neukum Date: Fri May 1 13:27:52 2026 -0400 media: rc: ttusbir: respect DMA coherency rules [ Upstream commit 50acaad3d202c064779db8dc3d010007347f59c7 ] Buffers must not share a cache line with other data structures. Allocate separately. Fixes: 0938069fa0897 ("[media] rc: Add support for the TechnoTrend USB IR Receiver") Cc: stable@vger.kernel.org Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Hans Verkuil [ kept kzalloc(sizeof(*tt), GFP_KERNEL) instead of kzalloc_obj() ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2c38191380740fd42a19240bcf8cebf368c11560 Author: Cássio Gabriel Date: Fri May 1 13:13:18 2026 -0400 ALSA: aoa: i2sbus: clear stale prepared state [ Upstream commit 5ed060d5491597490fb53ec69da3edc4b1e8c165 ] The i2sbus PCM code uses pi->active to constrain the sibling stream to an already prepared duplex format and rate in i2sbus_pcm_open(). That state is set from i2sbus_pcm_prepare(), but the current code only clears it on close. As a result, the sibling stream can inherit stale constraints after the prepared state has been torn down. Clear pi->active when hw_params() or hw_free() tears down the prepared state, and set it again only after prepare succeeds. Replace the stale FIXME in the duplex constraint comment with a description of the current driver behavior: i2sbus still programs a single shared transport configuration for both directions, so mixed formats are not supported in duplex mode. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202604010125.AvkWBYKI-lkp@intel.com/ Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Cc: stable@vger.kernel.org Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260331-aoa-i2sbus-clear-stale-active-v2-1-3764ae2889a1@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d956208576ad0dbed1d6145a797144c03e31e9eb Author: Takashi Iwai Date: Fri May 1 13:13:17 2026 -0400 ALSA: aoa: Use guard() for mutex locks [ Upstream commit 1cb6ecbb372002ef9e531c5377e5f60122411e40 ] Replace the manual mutex lock/unlock pairs with guard() for code simplification. Only code refactoring, and no behavior change. Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20250829151335.7342-14-tiwai@suse.de Stable-dep-of: 5ed060d54915 ("ALSA: aoa: i2sbus: clear stale prepared state") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1958a92599b2653d730ccb6f5685fc3fbed21812 Author: Daniel Hodges Date: Thu Apr 30 14:57:55 2026 -0400 wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() [ Upstream commit ae5e95d4157481693be2317e3ffcd84e36010cbb ] The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. Fixes: 4636187da60b ("mwifiex: add wakeup timer based recovery mechanism") Cc: stable@vger.kernel.org Signed-off-by: Daniel Hodges Link: https://patch.msgid.link/20260206194401.2346-1-git@danielhodges.dev Signed-off-by: Johannes Berg [ changed `timer_delete_sync(&adapter->wakeup_timer)` to `del_timer_sync(&adapter->wakeup_timer)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 8e563d8db50f303171aceb79eec0807e7ba06951 Author: Rafael J. Wysocki Date: Thu Apr 30 14:57:32 2026 -0400 thermal: core: Fix thermal zone governor cleanup issues [ Upstream commit 41ff66baf81c6541f4f985dd7eac4494d03d9440 ] If thermal_zone_device_register_with_trips() fails after adding a thermal governor to the thermal zone being registered, the governor is not removed from it as appropriate which may lead to a memory leak. In turn, thermal_zone_device_unregister() calls thermal_set_governor() without acquiring the thermal zone lock beforehand which may race with a governor update via sysfs and may lead to a use-after-free in that case. Address these issues by adding two thermal_set_governor() calls, one to thermal_release() to remove the governor from the given thermal zone, and one to the thermal zone registration error path to cover failures preceding the thermal zone device registration. Fixes: e33df1d2f3a0 ("thermal: let governors have private data for each thermal zone") Cc: All applicable Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/5092923.31r3eYUQgx@rafael.j.wysocki [ adapted context for missing mutex_destroy/complete ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 959c13da6c36167ce1016d400a6104d2367f686e Author: Fedor Pchelkin Date: Thu Apr 30 12:07:40 2026 -0400 wifi: rtw88: check for PCI upstream bridge existence [ Upstream commit eb101d2abdcccb514ca4fccd3b278dd8267374f6 ] pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool. Fixes: 24f5e38a13b5 ("rtw88: Disable PCIe ASPM while doing NAPI poll on 8821CE") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin Acked-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20260220094730.49791-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 71b7a80c267bff2f9eb0bd14cd29b676729cb3b7 Author: Jimmy Hon Date: Thu Apr 30 12:07:39 2026 -0400 rtw88: 8821ce: Disable PCIe ASPM L1 for 8821CE using chip ID [ Upstream commit b9eb5f0742d107ca9c0f33da58f61ce83e3ce2fc ] Make workaround work for other 8821CE devices with different PCI ID Signed-off-by: Jimmy Hon Reviewed-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220407075123.420696-3-honyuenkwun@gmail.com Stable-dep-of: eb101d2abdcc ("wifi: rtw88: check for PCI upstream bridge existence") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9a6ebc670128383116b9e9bce8737c73ce20980b Author: Anshuman Khandual Date: Tue Apr 28 14:53:11 2026 -0400 arm64/mm: Enable batched TLB flush in unmap_hotplug_range() [ Upstream commit 48478b9f791376b4b89018d7afdfd06865498f65 ] During a memory hot remove operation, both linear and vmemmap mappings for the memory range being removed, get unmapped via unmap_hotplug_range() but mapped pages get freed only for vmemmap mapping. This is just a sequential operation where each table entry gets cleared, followed by a leaf specific TLB flush, and then followed by memory free operation when applicable. This approach was simple and uniform both for vmemmap and linear mappings. But linear mapping might contain CONT marked block memory where it becomes necessary to first clear out all entire in the range before a TLB flush. This is as per the architecture requirement. Hence batch all TLB flushes during the table tear down walk and finally do it in unmap_hotplug_range(). Prior to this fix, it was hypothetically possible for a speculative access to a higher address in the contiguous block to fill the TLB with shattered entries for the entire contiguous range after a lower address had already been cleared and invalidated. Due to the table entries being shattered, the subsequent TLB invalidation for the higher address would not then clear the TLB entries for the lower address, meaning stale TLB entries could persist. Besides it also helps in improving the performance via TLBI range operation along with reduced synchronization instructions. The time spent executing unmap_hotplug_range() improved 97% measured over a 2GB memory hot removal in KVM guest. This scheme is not applicable during vmemmap mapping tear down where memory needs to be freed and hence a TLB flush is required after clearing out page table entry. Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Closes: https://lore.kernel.org/all/aWZYXhrT6D2M-7-N@willie-the-truck/ Fixes: bbd6ec605c0f ("arm64/mm: Enable memory hot remove") Cc: stable@vger.kernel.org Reviewed-by: David Hildenbrand (Arm) Reviewed-by: Ryan Roberts Signed-off-by: Ryan Roberts Signed-off-by: Anshuman Khandual Signed-off-by: Catalin Marinas [ replaced `__pte_clear()` with `pte_clear()` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 714aa973da8163925eda7efd49361ccbee21ee46 Author: Bingquan Chen Date: Sat Apr 25 06:01:33 2026 -0400 net/packet: fix TOCTOU race on mmap'd vnet_hdr in tpacket_snd() [ Upstream commit 2c054e17d9d41f1020376806c7f750834ced4dc5 ] In tpacket_snd(), when PACKET_VNET_HDR is enabled, vnet_hdr points directly into the mmap'd TX ring buffer shared with userspace. The kernel validates the header via __packet_snd_vnet_parse() but then re-reads all fields later in virtio_net_hdr_to_skb(). A concurrent userspace thread can modify the vnet_hdr fields between validation and use, bypassing all safety checks. The non-TPACKET path (packet_snd()) already correctly copies vnet_hdr to a stack-local variable. All other vnet_hdr consumers in the kernel (tun.c, tap.c, virtio_net.c) also use stack copies. The TPACKET TX path is the only caller of virtio_net_hdr_to_skb() that reads directly from user-controlled shared memory. Fix this by copying vnet_hdr from the mmap'd ring buffer to a stack-local variable before validation and use, consistent with the approach used in packet_snd() and all other callers. Fixes: 1d036d25e560 ("packet: tpacket_snd gso and checksum offload") Signed-off-by: Bingquan Chen Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260418112006.78823-1-patzilla007@gmail.com Signed-off-by: Jakub Kicinski [ replaced `vnet_hdr_sz` with `sizeof(vnet_hdr)` and `if (vnet_hdr_sz)` with `if (po->has_vnet_hdr)` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 282cbbb476b9f35793452bc461934af4c7eca169 Author: Michael Bommarito Date: Fri Apr 24 13:25:12 2026 -0400 ksmbd: require minimum ACE size in smb_check_perm_dacl() [ Upstream commit d07b26f39246a82399661936dd0c853983cfade7 ] Both ACE-walk loops in smb_check_perm_dacl() only guard against an under-sized remaining buffer, not against an ACE whose declared `ace->size` is smaller than the struct it claims to describe: if (offsetof(struct smb_ace, access_req) > aces_size) break; ace_size = le16_to_cpu(ace->size); if (ace_size > aces_size) break; The first check only requires the 4-byte ACE header to be in bounds; it does not require access_req (4 bytes at offset 4) to be readable. An attacker who has set a crafted DACL on a file they own can declare ace->size == 4 with aces_size == 4, pass both checks, and then granted |= le32_to_cpu(ace->access_req); /* upper loop */ compare_sids(&sid, &ace->sid); /* lower loop */ reads access_req at offset 4 (OOB by up to 4 bytes) and ace->sid at offset 8 (OOB by up to CIFS_SID_BASE_SIZE + SID_MAX_SUB_AUTHORITIES * 4 bytes). Tighten both loops to require ace_size >= offsetof(struct smb_ace, sid) + CIFS_SID_BASE_SIZE which is the smallest valid on-wire ACE layout (4-byte header + 4-byte access_req + 8-byte sid base with zero sub-auths). Also reject ACEs whose sid.num_subauth exceeds SID_MAX_SUB_AUTHORITIES before letting compare_sids() dereference sub_auth[] entries. parse_sec_desc() already enforces an equivalent check (lines 441-448); smb_check_perm_dacl() simply grew weaker validation over time. Reachability: authenticated SMB client with permission to set an ACL on a file. On a subsequent CREATE against that file, the kernel walks the stored DACL via smb_check_perm_dacl() and triggers the OOB read. Not pre-auth, and the OOB read is not reflected to the attacker, but KASAN reports and kernel state corruption are possible. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Acked-by: Namjae Jeon Signed-off-by: Steve French [ changed le16_to_cpu to le32_to_cpu for num_aces field which is __le32 ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 9e203dbb5402897c43130fb171a2617008a91f45 Author: Michael Bommarito Date: Fri Apr 24 11:08:27 2026 -0400 smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path [ Upstream commit a58c5af19ff0d6f44f6e9fe31e33a2c92223f77e ] smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds. Fixes: f5778c398713 ("SMB3: Allow SMB3 FSCTL queries to be sent to server from tools") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1592a6cd6f653f2d24572a6976c7a775b19f4940 Author: Michael Bommarito Date: Fri Apr 24 10:33:39 2026 -0400 smb: client: require a full NFS mode SID before reading mode bits [ Upstream commit 2757ad3e4b6f9e0fed4c7739594e702abc5cab21 ] parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl. Fixes: e2f8fbfb8d09 ("cifs: get mode bits from special sid on stat") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Michael Bommarito Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit c3ba5ca642167f6b22ef3ad75d430d8c67f58798 Author: DaeMyung Kang Date: Fri Apr 24 10:08:09 2026 -0400 smb: server: fix max_connections off-by-one in tcp accept path [ Upstream commit ce23158bfe584bd90d1918f279fdf9de57802012 ] The global max_connections check in ksmbd's TCP accept path counts the newly accepted connection with atomic_inc_return(), but then rejects the connection when the result is greater than or equal to server_conf.max_connections. That makes the effective limit one smaller than configured. For example: - max_connections=1 rejects the first connection - max_connections=2 allows only one connection The per-IP limit in the same function uses <= correctly because it counts only pre-existing connections. The global limit instead checks the post-increment total, so it should reject only when that total exceeds the configured maximum. Fix this by changing the comparison from >= to >, so exactly max_connections simultaneous connections are allowed and the next one is rejected. This matches the documented meaning of max_connections in fs/smb/server/ksmbd_netlink.h as the "Number of maximum simultaneous connections". Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter") Cc: stable@vger.kernel.org Signed-off-by: DaeMyung Kang Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit dc2e7d595d68cf1be1ba64e3d30ebf3266bf7242 Author: Michael Bommarito Date: Fri Apr 24 09:51:35 2026 -0400 smb: server: fix active_num_conn leak on transport allocation failure [ Upstream commit 6551300dc452ac16a855a83dbd1e74899542d3b3 ] Commit 77ffbcac4e56 ("smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()") addressed the kthread_run() failure path. The earlier alloc_transport() == NULL path in the same function has the same leak, is reachable pre-authentication via any TCP connect to port 445, and was empirically reproduced on UML (ARCH=um, v7.0-rc7): a small number of forced allocation failures were sufficient to put ksmbd into a state where every subsequent connection attempt was rejected for the remainder of the boot. ksmbd_kthread_fn() increments active_num_conn before calling ksmbd_tcp_new_connection() and discards the return value, so when alloc_transport() returns NULL the socket is released and -ENOMEM returned without decrementing the counter. Each such failure permanently consumes one slot from the max_connections pool; once cumulative failures reach the cap, atomic_inc_return() hits the threshold on every subsequent accept and every new connection is rejected. The counter is only reset by module reload. An unauthenticated remote attacker can drive the server toward the memory pressure that makes alloc_transport() fail by holding open connections with large RFC1002 lengths up to MAX_STREAM_PROT_LEN (0x00FFFFFF); natural transient allocation failures on a loaded host produce the same drift more slowly. Mirror the existing rollback pattern in ksmbd_kthread_fn(): on the alloc_transport() failure path, decrement active_num_conn gated on server_conf.max_connections. Repro details: with the patch reverted, forced alloc_transport() NULL returns leaked counter slots and subsequent connection attempts -- including legitimate connects issued after the forced-fail window had closed -- were all rejected with "Limit the maximum number of connections". With this patch applied, the same connect sequence produces no rejections and the counter cycles cleanly between zero and one on every accept. Fixes: 0d0d4680db22 ("ksmbd: add max connections parameter") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit ffb94770dbdfb5411be5d9f44a960b010ec890ad Author: Yongpeng Yang Date: Fri Apr 24 09:43:22 2026 -0400 f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() [ Upstream commit 2d9c4a4ed4eef1f82c5b16b037aee8bad819fd53 ] The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition. Cc: stable@kernel.org Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list") Reported-by: syzbot+6e4cb1cac5efc96ea0ca@syzkaller.appspotmail.com Signed-off-by: Yongpeng Yang Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ folio => page ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3fec4b1f36ac38776137e738a364450e3feb86c7 Author: Chao Yu Date: Fri Apr 24 09:28:31 2026 -0400 f2fs: fix to do sanity check on dcc->discard_cmd_cnt conditionally [ Upstream commit 6af249c996f7d73a3435f9e577956fa259347d18 ] Syzbot reported a f2fs bug as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:1900! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6527 Comm: syz.5.110 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026 RIP: 0010:f2fs_issue_discard_timeout+0x59b/0x5a0 fs/f2fs/segment.c:1900 Code: d9 80 e1 07 80 c1 03 38 c1 0f 8c d6 fe ff ff 48 89 df e8 a8 5e fa fd e9 c9 fe ff ff e8 4e 46 94 fd 90 0f 0b e8 46 46 94 fd 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc9000494f940 EFLAGS: 00010283 RAX: ffffffff843009ca RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc9001ca78000 RSI: 00000000000029f3 RDI: 00000000000029f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: dffffc0000000000 R11: ffffed100893a431 R12: 1ffff1100893a430 R13: 1ffff1100c2b702c R14: dffffc0000000000 R15: ffff8880449d2160 FS: 00007ffa35fed6c0(0000) GS:ffff88812643d000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2b68634000 CR3: 0000000039f62000 CR4: 00000000003526f0 Call Trace: __f2fs_remount fs/f2fs/super.c:2960 [inline] f2fs_reconfigure+0x108a/0x1710 fs/f2fs/super.c:5443 reconfigure_super+0x227/0x8a0 fs/super.c:1080 do_remount fs/namespace.c:3391 [inline] path_mount+0xdc5/0x10e0 fs/namespace.c:4151 do_mount fs/namespace.c:4172 [inline] __do_sys_mount fs/namespace.c:4361 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4338 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ffa37dbda0a The root cause is there will be race condition in between f2fs_ioc_fitrim() and f2fs_remount(): - f2fs_remount - f2fs_ioc_fitrim - f2fs_issue_discard_timeout - __issue_discard_cmd - __drop_discard_cmd - __wait_all_discard_cmd - f2fs_trim_fs - f2fs_write_checkpoint - f2fs_clear_prefree_segments - f2fs_issue_discard - __issue_discard_async - __queue_discard_cmd - __update_discard_tree_range - __insert_discard_cmd - __create_discard_cmd : atomic_inc(&dcc->discard_cmd_cnt); - sanity check on dcc->discard_cmd_cnt (expect discard_cmd_cnt to be zero) This will only happen when fitrim races w/ remount rw, if we remount to readonly filesystem, remount will wait until mnt_pcp.mnt_writers to zero, that means fitrim is not in process at that time. Cc: stable@kernel.org Fixes: 2482c4325dfe ("f2fs: detect bug_on in f2fs_wait_discard_bios") Reported-by: syzbot+62538b67389ee582837a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/69b07d7c.050a0220.8df7.09a1.GAE@google.com Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim [ Different function signatures ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1abd50fc3cfa16fc2074a3c8c2729c50fd9d7043 Author: Lukas Wunner Date: Sun Apr 12 16:19:47 2026 +0200 lib/crypto: mpi: Fix integer underflow in mpi_read_raw_from_sgl() commit 8c2f1288250a90a4b5cabed5d888d7e3aeed4035 upstream. Yiming reports an integer underflow in mpi_read_raw_from_sgl() when subtracting "lzeros" from the unsigned "nbytes". For this to happen, the scatterlist "sgl" needs to occupy more bytes than the "nbytes" parameter and the first "nbytes + 1" bytes of the scatterlist must be zero. Under these conditions, the while loop iterating over the scatterlist will count more zeroes than "nbytes", subtract the number of zeroes from "nbytes" and cause the underflow. When commit 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") originally introduced the bug, it couldn't be triggered because all callers of mpi_read_raw_from_sgl() passed a scatterlist whose length was equal to "nbytes". However since commit 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists"), the underflow can now actually be triggered. When invoking a KEYCTL_PKEY_ENCRYPT system call with a larger "out_len" than "in_len" and filling the "in" buffer with zeroes, crypto_akcipher_sync_prep() will create an all-zero scatterlist used for both the "src" and "dst" member of struct akcipher_request and thereby fulfil the conditions to trigger the bug: sys_keyctl() keyctl_pkey_e_d_s() asymmetric_key_eds_op() software_key_eds_op() crypto_akcipher_sync_encrypt() crypto_akcipher_sync_prep() crypto_akcipher_encrypt() rsa_enc() mpi_read_raw_from_sgl() To the user this will be visible as a DoS as the kernel spins forever, causing soft lockup splats as a side effect. Fix it. Reported-by: Yiming Qian # off-list Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers") Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v4.4+ Reviewed-by: Ignat Korchagin Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/59eca92ff4f87e2081777f1423a0efaaadcfdb39.1776003111.git.lukas@wunner.de Signed-off-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman commit ff44ec94d4fc8348600a69de0a8fa1102c23bce8 Author: Eric Biggers Date: Mon Mar 2 12:34:09 2026 -0800 net/tcp-md5: Fix MAC comparison to be constant-time commit 46d0d6f50dab706637f4c18a470aac20a21900d3 upstream. To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this. Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Fixes: 658ddaaf6694 ("tcp: md5: RST: getting md5 key from listener") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Link: https://patch.msgid.link/20260302203409.13388-1-ebiggers@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman commit 72ab76ea680dbdba2adbd62fa18513909d5d2a13 Author: Longxuan Yu Date: Sun Apr 12 16:38:20 2026 +0800 io_uring/poll: fix signed comparison in io_poll_get_ownership() Commit 326941b22806cbf2df1fbfe902b7908b368cce42 usptream. io_poll_get_ownership() uses a signed comparison to check whether poll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS)) atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG (BIT(31)) is set in poll_refs, the value becomes negative in signed arithmetic, so the >= 128 comparison always evaluates to false and the slowpath is never taken. Fix this by casting the atomic_read() result to unsigned int before the comparison, so that the cancel flag is treated as a large positive value and correctly triggers the slowpath. Fixes: a26a35e9019f ("io_uring: make poll refs more robust") Cc: stable@vger.kernel.org Reported-by: Yifan Wu Reported-by: Juefei Pu Co-developed-by: Yuan Tan Signed-off-by: Yuan Tan Suggested-by: Xin Liu Tested-by: Zhengchuan Liang Signed-off-by: Longxuan Yu Signed-off-by: Ren Wei Reviewed-by: Pavel Begunkov Link: https://patch.msgid.link/3a3508b08bcd7f1bc3beff848ae6e1d73d355043.1775965597.git.ylong030@ucr.edu Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 21a9b19ce2e81e26844c3ba9304b64da1be29b86 Author: SeongJae Park Date: Mon Jun 15 15:37:31 2026 -0400 mm/damon/ops-common: call folio_test_lru() after folio_get() [ Upstream commit d6b8b02a27b3dd09ec12144322b3dac46d9bc9ef ] damon_get_folio() speculatively calls folio_test_lru() before folio_try_get(). The folio can get freed and reallocated to a tail page. In the case, VM_BUG_ON_PGFLAGS() in const_folio_flags() can be triggered. Remove the speculative call. Also mark folio_test_lru() check right after folio_try_get() success as no more unlikely. The race should be rare. Also the problem can happen only if the kernel has enabled CONFIG_DEBUG_VM_PGFLAGS. No real world report of this issue has been made so far. This fix is based on only theoretical analysis. That said, a bug is a bug. A similar issue was also fixed via commit 3203b3ab0fcf ("mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()"). I don't expect this change will make a meaningful impact to DAMON performance in the real world, though I will be happy to be corrected from the real world reports. The issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260525162256.8317-1-sj@kernel.org Link: https://lore.kernel.org/20260517234112.89245-1-sj@kernel.org [1] Fixes: 3f49584b262c ("mm/damon: implement primitives for the virtual memory address spaces") Signed-off-by: SeongJae Park Cc: Fernand Sieber Cc: Leonard Foerster Cc: Shakeel Butt Cc: # 5.15.x Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 897d6a7247739fb1528f98c575df4f2e5de7f994 Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Sat May 23 21:52:10 2026 +0800 fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling commit 00633c4683828acd5256fa8d5163f440d74bbe71 upstream. A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); lock(&dev->event_lock); *** DEADLOCK *** Reviewed-by: Jeff Layton Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Link: https://patch.msgid.link/20260523135210.590928-1-w15303746062@163.com Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 31180638a33acad12c863132704a76536fb66211 Author: Harry Wentland Date: Tue May 5 11:52:15 2026 -0400 drm/amd/display: Use krealloc_array() in dal_vector_reserve() commit da48bc4461b8a5ebfb9264c9b191a701d8e99009 upstream. [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. Fixes: 2004f45ef83f ("drm/amd/display: Use kernel alloc/free") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit b781f90a9528555c709e59789550893581ef0be4 Author: Harry Wentland Date: Mon May 11 16:46:25 2026 -0400 drm/amd/display: Fix NULL deref and buffer over-read in SDP debugfs commit adf67034b1f61f7119295208085bfd43f85f56af upstream. [Why & How] dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc without checking for NULL. A connector can be connected but not bound to any CRTC (e.g. after hot-plug before the next atomic commit), causing a kernel crash when writing to the sdp_message debugfs node. The function also ignores the user-provided size argument and always passes 36 bytes to copy_from_user(), reading past the user buffer when size < 36. Fix both issues by: - Returning -ENODEV when connector->base.state or state->crtc is NULL - Clamping write_size to min(size, sizeof(data)) Fixes: c7ba3653e977 ("drm/amd/display: Generic SDP message access in amdgpu") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 6ab4c36a522842ff70474a1c0af2e40e50fc8300) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 029571d51140650783be4fb98fe7cb4754752086 Author: Harry Wentland Date: Mon May 4 15:51:13 2026 -0400 drm/amd/display: Clamp VBIOS HDMI retimer register count to array size commit fb0707ce00eef4e2d60c3020e1c0432739703e4a upstream. [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 91fb41218c413989d8b6c837748751454b452d68 Author: Harry Wentland Date: Thu May 7 15:38:37 2026 -0400 drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size commit f0f3981c43b32cadfe373d636d9e9ca522bb3702 upstream. [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. Fixes: eff682f83c9c ("drm/amd/display: Add DDC handles for HDCP2.2") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 3d1561537237c6cc1db76155183d8bbdac2339f0 Author: Bjorn Andersson Date: Sat May 30 21:44:21 2026 +0100 slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock commit 55f2ea9ff83cc27a85526b14bc9b32f96a08d6ec upstream. During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock. Fixes: a899d324863a ("slimbus: qcom-ngd-ctrl: add Sub System Restart support") Cc: stable@vger.kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-9-srini@kernel.org Signed-off-by: Greg Kroah-Hartman commit 7720654b4842bcdfeb64bc002f6186041849e1e7 Author: Michael Bommarito Date: Mon May 25 05:28:29 2026 -0400 thunderbolt: Limit XDomain response copy to actual frame size commit 4db2bd2ed4785dbadaeeab9f4e346b21ac5fb8eb upstream. tb_xdomain_copy() copies req->response_size bytes from the received packet buffer regardless of the actual frame size. When a short response arrives, this reads past the valid frame data in the DMA pool buffer into stale contents from previous transactions. Use the minimum of frame size and expected response size for the copy length. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit 6021d39ccd979713b39b980286020d8f9a45efd1 Author: Michael Bommarito Date: Mon May 25 05:28:27 2026 -0400 thunderbolt: Clamp XDomain response data copy to allocation size commit 322e93448d908434ae5545660fcbe8f5a7a8e141 upstream. tb_xdp_properties_request() derives the per-packet copy length from the response header without checking that it fits in the previously allocated data buffer. A malicious peer can set its length field larger than the declared data_length, causing memcpy to write past the kcalloc allocation. Clamp the per-packet copy length so that the cumulative offset never exceeds data_len. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit b212bc161d8a9937b42153723a4a3f2f74fab528 Author: Michael Bommarito Date: Mon May 25 05:28:26 2026 -0400 thunderbolt: Bound root directory content to block size commit 65423079c7420e3dbf9a7aa345c243a3f5752e5d upstream. __tb_property_parse_dir() does not check that content_offset + content_len fits within block_len for the root directory case. When rootdir->length equals or exceeds block_len - 2, the entry loop reads past the allocated property block. Add a bounds check after computing content_offset and content_len to reject directories whose content extends past the block. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit 35d6c9252a152e756768a26dbf216b9dd9dd8e92 Author: Michael Bommarito Date: Mon May 25 05:28:25 2026 -0400 thunderbolt: Reject zero-length property entries in validator commit cff8eb65d1eafe7793e54b4d0cf6bf831644630b upstream. tb_property_entry_valid() accepts entries with length == 0 for DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes validation but causes an underflow in the null-termination logic: property->value.text[property->length * 4 - 1] = '\0'; When property->length is 0 this writes to offset -1 relative to the allocation. Reject zero-length entries early in the validator since they have no valid representation in the XDomain property protocol. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit a6724b7b812ac8793514a1d5938db5d9d29ae725 Author: Wyatt Feng Date: Fri Jun 5 13:53:42 2026 +0800 sctp: stream: fully roll back denied add-stream state commit a5f8a90ac9f77c678a9781c0a464b635e0d63e49 upstream. When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions. Fixes: 637784ade221 ("sctp: introduce priority based stream scheduler") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Acked-by: Xin Long Link: https://patch.msgid.link/d78954ecd94954653ee299400e98d74a03a6f7d3.1780603399.git.bronzed_45_vested@icloud.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b2be72d401833194917e44fbd8d8144bb4f2db16 Author: Zhao Zhang Date: Sat May 30 23:57:14 2026 +0800 sctp: diag: reject stale associations in dump_one path commit 5eba3e48d78edd7551b992cb7ba687019b3a78da upstream. The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Signed-off-by: Zhao Zhang Signed-off-by: Ren Wei Acked-by: Xin Long Link: https://patch.msgid.link/fac6043fa20a2ff68e12958c431836f692c51268.1780113823.git.zzhan461@ucr.edu Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d3f0b8739e8a9ad22e227a74fac50f044fb4d7bb Author: Jisheng Zhang Date: Sun May 24 10:34:55 2026 +0800 mmc: sdhci: add signal voltage switch in sdhci_resume_host commit f595e8e77a51eee35e331f69321766593a845ef2 upstream. I met one suspend/resume issue with sdr104 capable sdio wifi card (with "keep-power-in-suspend" set in DT property): After resuming from suspend to ram, the sdio wifi card stops working. Further debug shows that although ios shows the sdio card is at sdr104 mode, the voltage is still at 3V3. This is due to missing the calling of ->start_signal_voltage_switch() in sdhci_resume_host(). Fix this issue by adding ->start_signal_voltage_switch() in sdhci_resume_host(). This also matches what we do for sdhci_runtime_resume_host(). Then the question is: why this issue hasn't reported and fixed for so long time. IMHO, several reasons: Some host controllers just kick off the runtime resume for system resume, so they benefit from the well supported runtime pm code; Some platforms just use the old sdio wifi card which doesn't need signal voltage switch at all, the default voltage is 3v3 after resuming. Fixes: 6308d2905bd3 ("mmc: sdhci: add quirk for keeping card power during suspend") Signed-off-by: Jisheng Zhang Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit bff9b9614380dda027deb7361e7f3c17b9f081e9 Author: Lad Prabhakar Date: Tue May 19 14:53:40 2026 +0100 mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC commit f48ee49726ee4ab545fd2dc644f169c0809b19b3 upstream. The RZ/G2H (R8A774E1) SoC was previously handled via the generic "renesas,rcar-gen3-sdhi" fallback compatible string. However, because the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it requires the specific quirks and configuration defined in `of_r8a7795_compatible` rather than the generic Gen3 data. Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly. Note that the DT binding file renesas,sdhi.yaml does not need an update as the entry for this SoC is already present. Fixes: 31941342888d ("arm64: dts: renesas: r8a774e1: Add SDHI nodes") Cc: stable@vger.kernel.org Signed-off-by: Lad Prabhakar Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 460cd4ac8875897e231bf28381369bf0918f1770 Author: Kamal Dasu Date: Thu Apr 23 15:18:55 2026 -0400 mmc: core: Fix host controller programming for fixed driver type commit 5a52c5701a67d5176eb1afbf1bdaf7d6dfeec597 upstream. When using the fixed-emmc-driver-type device tree property, the MMC core correctly selects the driver strength for the card but fails to program the host controller accordingly. This causes a mismatch where the card uses the specified driver type while the host controller defaults to Type B (since ios->drv_type remains zero). Split the driver type programming logic to handle both fixed and dynamic driver type selection paths. For fixed driver types, program the host controller with the selected drive_strength value. For dynamic selection, use the existing drv_type as before. This ensures both the eMMC device and host controller use matching driver strengths, preventing potential signal integrity issues. Fixes: 6186d06c519e ("mmc: parse new binding for eMMC fixed driver type") Signed-off-by: Kamal Dasu Reviewed-by: Shawn Lin Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 2c5e5e4a5970c41f16e3ad801a78719ed5d5c71b Author: Yuqi Xu Date: Fri May 29 21:01:44 2026 +0800 net: rds: clear i_sends on setup unwind commit 20cf0fb715c41111469577e85e35d15f099473e0 upstream. The RDS IB connection teardown path is written so it can run during partial startup and on repeated shutdown attempts. It uses NULL pointers to distinguish resources that are still owned from resources that have already been released. When rds_ib_setup_qp() fails after allocating i_sends but before allocating i_recvs, the sends_out path frees i_sends without clearing the pointer. A later shutdown pass can still treat that stale pointer as a live send ring allocation. Clear i_sends after vfree() in the error unwind path so the existing shutdown logic continues to use the correct ownership state. Fixes: 3b12f73a5c29 ("rds: ib: add error handle") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Zhengchuan Liang Reported-by: Xin Liu Signed-off-by: Yuqi Xu Signed-off-by: Ren Wei Reviewed-by: Allison Henderson Link: https://patch.msgid.link/5a0f7624bb9845a7b67d26166a150b59e7f394ce.1779632468.git.xuyq21@lenovo.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ed876ab2fb262c8c91b7cb1c3005f8bf6f4faef3 Author: Bartosz Golaszewski Date: Tue Jun 2 09:34:14 2026 +0200 net: mv643xx: fix OF node refcount commit 4aacf509e537a711fa71bca9f234e5eb6968850e upstream. Platform devices created with platform_device_alloc() call platform_device_release() when the last reference to the device's kobject is dropped. This function calls of_node_put() unconditionally. This works fine for devices created with platform_device_register_full() but users of the split approach (platform_device_alloc() + platform_device_add()) must bump the reference of the of_node they assign manually. Add the missing call to of_node_get(). Cc: stable@vger.kernel.org Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260602073414.22500-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit b02b2e3e876c18733b868a29064abd11cdbf8feb Author: ZhaoJinming Date: Mon Jun 1 16:56:49 2026 +0800 net: bonding: fix NULL pointer dereference in bond_do_ioctl() commit a764b0e8317a863006e05732e1aefe821b9d8c2d upstream. In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check. Fixes: e2a7420df2e0 ("bonding/main: convert to using slave printk macros") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: ZhaoJinming Link: https://patch.msgid.link/20260601085649.4029067-1-zhaojinming@uniontech.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 2d0f47e27c1fa718b29c69aa7c96a2c5161bc2c2 Author: Junrui Luo Date: Sat May 30 21:45:26 2026 +0100 misc: fastrpc: fix DMA address corruption due to find_vma misuse commit 464c6ad2aa16e1e1df9d559289199356493d1e00 upstream. fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. Cc: stable@vger.kernel.org Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Reported-by: Yuhao Jiang Signed-off-by: Junrui Luo Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204528.116920-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman commit e1e3a05efe5954d5bad01157d79429d39a67a7ae Author: Anandu Krishnan E Date: Sat May 30 21:45:25 2026 +0100 misc: fastrpc: fix use-after-free of fastrpc_user in workqueue context commit e85eb5feca8e254905ffa6c57a3c99c89a674a0f upstream. There is a race between fastrpc_device_release() and the workqueue that processes DSP responses. When the user closes the file descriptor, fastrpc_device_release() frees the fastrpc_user structure. Concurrently, an in-flight DSP invocation can complete and fastrpc_rpmsg_callback() schedules context cleanup via schedule_work(&ctx->put_work). If the workqueue runs fastrpc_context_free() in parallel with or after fastrpc_device_release() has freed the user structure, it dereferences the freed fastrpc_user. Depending on the state of the context at the time of the race, any one of the following accesses can be hit: 1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...) to strip the SID bits from the stored IOVA before passing the physical address to dma_free_coherent(). 2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to reconstruct the source permission bitmask needed for the qcom_scm_assign_mem() call that returns memory from the DSP VM back to HLOS. 3. fastrpc_free_map() acquires map->fl->lock to safely remove the map node from the fl->maps list. The resulting use-after-free manifests as: pc : fastrpc_buf_free+0x38/0x80 [fastrpc] lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_free+0xa8/0x1b0 [fastrpc] fastrpc_context_put_wq+0x78/0xa0 [fastrpc] process_one_work+0x180/0x450 worker_thread+0x26c/0x388 Add kref-based reference counting to fastrpc_user. Have each invoke context take a reference on the user at allocation time and release it when the context is freed. Release the initial reference in fastrpc_device_release() at file close. Move the teardown of the user structure — freeing pending contexts, maps, mmaps, and the channel context reference — into the kref release callback fastrpc_user_free(), so that it runs only when the last reference is dropped, regardless of whether that happens at device close or after the final in-flight context completes. Fixes: 6cffd79504ce ("misc: fastrpc: Add support for dmabuf exporter") Cc: stable@kernel.org Signed-off-by: Anandu Krishnan E Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204528.116920-2-srini@kernel.org Signed-off-by: Greg Kroah-Hartman commit 92cda2593cf2ed25b0e9d78e5e6d8303bba1a064 Author: Yilin Zhu Date: Thu Apr 30 13:21:34 2026 +0800 ipc/shm: serialize orphan cleanup with shm_nattch updates commit 2e5c6f4fd4001562781e99bbfc7f1f0127187542 upstream. shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that does not serialize all fields tested by shm_may_destroy(). In particular, shm_nattch is updated while holding shm_perm.lock, and attach paths can do that without holding the rwsem. Do not decide that an orphaned segment is unused before taking the object lock. Move the shm_may_destroy() check under shm_perm.lock, matching the other destroy paths, and unlock the segment when it no longer qualifies for removal. Link: https://lore.kernel.org/9d97cc1031de2d0bace0edf3a668818aa2f4eca6.1777410234.git.zylzyl2333@gmail.com Fixes: 4c677e2eefdb ("shm: optimize locking and ipc_namespace getting") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Yilin Zhu Signed-off-by: Ren Wei Cc: Christian Brauner Cc: Jeongjun Park Cc: Kees Cook Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Serge Hallyn Cc: Vasiliy Kulikov Cc: Davidlohr Bueso Cc: Oleg Nesterov Cc: Serge Hallyn Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 323a11de71de441a8ea0afb7224be46881401ea1 Author: Cryolitia PukNgae Date: Fri Jun 5 15:27:21 2026 +0800 Input: atkbd - skip deactivate for HONOR BCC-N's internal keyboard commit fb402386af4cdce108ff991a796386de55439735 upstream. After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR BCC-N, aka HONOR MagicBook 14 2026's internal keyboard stops working. Adding the atkbd_deactivate_fixup quirk fixes it. DMI: HONOR BCC-N/BCC-N-PCB, BIOS 1.04 04/07/2026 Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID") Reported-by: Hongfei Ren Link: https://github.com/colorcube/Linux-on-Honor-Magicbook-14-Pro/issues/1#issuecomment-4562679891 Tested-by: Hongfei Ren Cc: stable@kernel.org Signed-off-by: Cryolitia PukNgae Link: https://patch.msgid.link/20260605-honor-v1-1-78e05e491193@linux.dev Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 003dd8b5d06e67416b1d68dcbb961dbcdb14ac68 Author: Zeyu WANG Date: Wed Jun 3 01:09:09 2026 +0800 Input: atkbd - add DMI quirk for Lenovo Yoga Air 14 (83QK) commit ad0979fe053e9f2db82da82188256ef6eb41095a upstream. The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive after the standard atkbd init sequence. Controlled testing on the actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate) command specifically corrupts the EC state, causing zero IRQ1 interrupts after init. Skipping only the deactivate command (while keeping F4 ENABLE) resolves the issue completely: both keystroke input and CapsLock LED toggle work correctly. The reverse test - skipping only F4 while keeping F5 - makes the problem worse (zero keystroke interrupts), confirming F5 is the sole culprit. Add a DMI quirk entry for LENOVO/83QK using the existing atkbd_deactivate_fixup callback, consistent with the existing entries for LG Electronics and HONOR FMB-P that address the same EC F5 deactivate issue. Signed-off-by: Zeyu WANG Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 09e41cebb54cf12c6ce7ad474484bc8b83e0276f Author: Akhil R Date: Mon May 18 17:10:13 2026 +0530 i2c: tegra: Fix NOIRQ suspend/resume commit 656646b3847ac6a21b074a813223feef2aadd6e2 upstream. The Tegra I2C driver relies on runtime PM to wake up the controller before each transfer. However, runtime PM is disabled between the system suspend and NOIRQ suspend. If an I2C device initiates a transfer during this window, the I2C controller fails to wake up and the transfer fails. To handle this, the controller must be kept available for this period to allow transfers. Rework the I2C controller's system PM callbacks such that the controller is resumed from runtime suspend during system suspend and it stays RPM_ACTIVE throughout the suspend-resume cycle until it is runtime suspended back in the system resume. The clocks are disabled in NOIRQ suspend and enabled back in NOIRQ resume by calling the controller's runtime PM functions directly. Fixes: 8ebf15e9c869 ("i2c: tegra: Move suspend handling to NOIRQ phase") Assisted-by: Cursor:claude-4.6-opus Signed-off-by: Akhil R Cc: # v5.4+ Reviewed-by: Jon Hunter Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260518114013.62065-5-akhilrajeev@nvidia.com Signed-off-by: Greg Kroah-Hartman commit e9aa2473cf9400a6023b02b8f217c2760021e5ed Author: Guillermo Rodríguez Date: Tue May 26 11:12:09 2026 +0200 i2c: stm32f7: fix timing computation ignoring i2c-analog-filter commit a124579c0763da7bc408f4cd7e8f606cadc94855 upstream. stm32f7_i2c_compute_timing() uses i2c_dev->analog_filter to pick the analog filter delay, but i2c_dev->analog_filter is parsed from the "i2c-analog-filter" DT property only after the compute_timing loop in stm32f7_i2c_setup_timing(), so in practice the timing calculations always ignore the analog filter. On an STM32MP1 board with clock-frequency = <400000> and i2c-analog-filter set, measured SCL frequency was ~382 kHz. This also affects (widens) the computed SDADEL range. At high bus clock speeds, this can select an SDADEL value that violates tVD;DAT (data valid time). Fix by parsing "i2c-analog-filter" before the compute_timing loop. Fixes: 83c3408f7b9c ("i2c: stm32f7: support DT binding i2c-analog-filter") Signed-off-by: Guillermo Rodríguez Cc: # v5.13+ Acked-by: Alain Volmat Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260526091210.20383-1-guille.rodriguez@gmail.com Signed-off-by: Greg Kroah-Hartman commit 4d2b4a9cda6837e5ee1de1290f2e773a713b71e9 Author: Vladimir Zapolskiy Date: Sat May 16 02:41:18 2026 +0300 i2c: qcom-cci: Fix NULL pointer dereference in cci_remove() commit 729ac5a4b966aac42e08a94dea966f4429008548 upstream. On all modern platforms Qualcomm CCI controller provides two I2C masters, and on particular boards only one I2C master may be initialized, and in such cases the device unbinding or driver removal causes a NULL pointer dereference, because cci_halt() is called for all two I2C masters, but a completion is initialized only for the single enabled master: % rmmod i2c-qcom-cci Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __wait_for_common+0x194/0x1a8 (P) wait_for_completion_timeout+0x20/0x2c cci_remove+0xc4/0x138 [i2c_qcom_cci] platform_remove+0x20/0x30 device_remove+0x4c/0x80 device_release_driver_internal+0x1c8/0x224 driver_detach+0x50/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 qcom_cci_driver_exit+0x18/0x1008 [i2c_qcom_cci] .... Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Vladimir Zapolskiy Cc: # v5.8+ Reviewed-by: Konrad Dybcio Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260515234121.1607425-2-vladimir.zapolskiy@linaro.org Signed-off-by: Greg Kroah-Hartman commit bd23fa0c16c5c86e5b7713224ffbb87d9db81cca Author: Jann Horn Date: Tue May 19 16:29:38 2026 +0200 fuse: reject fuse_notify() pagecache ops on directories commit 9c954499d43aefac01c5dfb57a82b13d2dcf4b94 upstream. The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the FUSE daemon to actively write/read pagecache contents. For directories with FOPEN_CACHE_DIR, the pagecache is used as kernel-internal cache storage, and userspace is not supposed to have direct access to this cache - in particular, fuse_parse_cache() will hit WARN_ON() if the cache contains bogus data. Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than regular files with -EINVAL. Fixes: 5d7bc7e8680c ("fuse: allow using readdir cache") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Link: https://patch.msgid.link/20260519-fuse-dir-pagecache-v2-1-5428fa48e175@google.com Acked-by: Miklos Szeredi Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 5437679f9e2a97cd40b2d2d8c57f0996f33dea62 Author: Christian Brauner Date: Mon May 18 10:32:11 2026 +0200 pidfd: refuse access to tasks that have started exiting harder commit 62c4d31d78294bd61cf3403626b789e854357177 upstream. The recent ptrace fix closed a hole where someone could rely on task->mm becoming NULL during do_exit() to bypass dumpability checks. This api here leans on on the very same check and so inherits the fix. But there is no good reason to let it succeed at all once the target has entered do_exit(). PF_EXITING is set by exit_signals() at the very top of do_exit(), before exit_mm() and exit_files() run. Once we observe it, the task is committed to dying and exit_files() will release the fdtable shortly. Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260518-obgleich-petersilie-2d77ccccf9b9@brauner Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit e8a013c0c3ca2f6708341a56612a3f6d6921620a Author: Michael Bommarito Date: Tue Jun 2 15:46:42 2026 -0400 IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN commit 29e7b925ae6df64894e82ab6419994dc25580a8a upstream. In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done() computes the login request payload length as wc->byte_len minus ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int. A remote iSER initiator can post a login Send work request carrying fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows and login_req_len becomes negative. isert_rx_login_req() then reads that negative length back into a signed int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the min() is signed it keeps the negative value; the value is then passed as the memcpy() length and sign-extended to a multi-gigabyte size_t. The copy into the 8192-byte login->req_buf runs far out of bounds and faults, crashing the target node. The login phase precedes iSCSI authentication, so no credentials are required to reach this path. Reject any login PDU shorter than ISER_HEADERS_LEN before the subtraction, mirroring the existing early return on a failed work completion, so login_req_len can never go negative. The upper bound was already safe: a posted login buffer cannot deliver more than ISER_RX_PAYLOAD_SIZE, so the difference stays at or below MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing lower bound needs to be added. Fixes: b8d26b3be8b3 ("iser-target: Add iSCSI Extensions for RDMA (iSER) target driver") Link: https://patch.msgid.link/r/20260602194642.2273217-1-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit 964b1c3eb71afe58bb61c8b984164447e000ae8a Author: Kyle Meyer Date: Fri Jun 5 17:25:24 2026 -0500 bnxt_en: Fix NULL pointer dereference commit d930276f2cddd0b7294cac7a8fe7b877f6d9e08d upstream. PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.") Cc: stable@vger.kernel.org Signed-off-by: Kyle Meyer Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit cf7090e255d74c4b61c51f8ede9fcacdd8393b5b Author: Raf Dickson Date: Tue May 26 10:43:56 2026 +0000 vsock/vmci: fix sk_ack_backlog leak on failed handshake commit c05fa14db43ebef3bd862ca9d073981c0358b3f0 upstream. When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Cc: stable@vger.kernel.org Signed-off-by: Raf Dickson Acked-by: Stefano Garzarella Link: https://patch.msgid.link/20260526104356.469928-1-rafdog35@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 12357c6f4df06bde9ef0adc4331f0aec1a4c22a8 Author: Matthieu Baerts (NGI0) Date: Tue Jun 2 22:14:14 2026 +1000 mptcp: sockopt: check timestamping ret value commit 57132affbc89c02e1bf73fdf5724311bdc9a29da upstream. sock_set_timestamping() can fail for different reasons. The returned value should then be checked. If sock_set_timestamping() fails for at least one subflow, the first error is now reported to the userspace, similar to what is done with other socket options. Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows") Cc: stable@vger.kernel.org Reported-by: Willem de Bruijn Closes: https://lore.kernel.org/willemdebruijn.kernel.178a41a53d041@gmail.com Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-7-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 6586aae52526b56697e731a890e7b780bd9f03a7 Author: Paolo Abeni Date: Tue Jun 2 22:14:09 2026 +1000 mptcp: fix retransmission loop when csum is enabled commit d1918b36edcaed0ec4ef6888b2358c6b1ddcff47 upstream. Sashiko noted that retransmission with csum enabled can actually transmit new data, but currently the relevant code does not update accordingly snd_nxt. The may cause incoming ack drop and an endless retransmission loop. Address the issue incrementing snd_nxt as needed. Fixes: 4e14867d5e91 ("mptcp: tune re-injections for csum enabled mode") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-2-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit a3049e49e68b2d7db881892c59083b889e5e7e8f Author: Karl Mehltretter Date: Sun May 24 06:52:36 2026 +0100 ARM: 9474/1: io: avoid KASAN instrumentation of raw halfword I/O commit d59ed803715a71fb9582e139d648ece8d66dc743 upstream. For CPUs before ARMv6, __raw_readw() and __raw_writew() are implemented as C volatile halfword accesses so the compiler can generate an access sequence that is safe for those machines. With KASAN enabled, those C accesses are instrumented as normal memory accesses. That is not valid for MMIO. On ARM926/VersatilePB with KASAN enabled, PL011 probing traps in __asan_store2() while registering the UART, because the instrumented writew() tries to check KASAN shadow for an MMIO address. Keep the existing volatile halfword access, but move the ARMv5 definitions into __no_kasan_or_inline functions so raw MMIO halfword accesses are not instrumented by KASAN. The ARMv6-and-newer inline assembly path is unchanged. Fixes: 421015713b30 ("ARM: 9017/2: Enable KASan for ARM") Cc: stable@vger.kernel.org # v5.11+ Signed-off-by: Karl Mehltretter Reviewed-by: Linus Walleij Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman commit caa039f68c1e39f4165283dc5c80528abf51ce52 Author: Yuho Choi Date: Sun May 24 22:47:09 2026 -0400 ARM: socfpga: Fix OF node refcount leak in SMP setup commit 63838c323924fe4a78b2323bd45aa1030f72ca60 upstream. socfpga_smp_prepare_cpus() looks up the Cortex-A9 SCU node with of_find_compatible_node(), which returns a node reference that must be released with of_node_put(). The function maps the SCU registers and then returns without dropping that reference, leaking the node on both the success path and the of_iomap() failure path. Drop the reference once the mapping attempt is complete. The returned MMIO mapping does not depend on keeping the device node reference held. Fixes: 122694a0c712 ("ARM: socfpga: use of_iomap to map the SCU") Cc: stable@vger.kernel.org Signed-off-by: Yuho Choi Signed-off-by: Dinh Nguyen Signed-off-by: Greg Kroah-Hartman commit ed77cc819ad631264787cade5ae5ec4c535ec6bb Author: Michael Bommarito Date: Tue Jun 2 18:04:57 2026 -0400 RDMA/srp: bound SRP_RSP sense copy by the received length commit 13e91fd076306f5d0cdfa14f53d69e37274723c4 upstream. srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp into line with them. Fixes: aef9ec39c47f ("IB: Add SCSI RDMA Protocol (SRP) initiator") Link: https://patch.msgid.link/r/20260602220457.2542840-1-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman commit b6880da3da20de046cb5c9c70409456081b0cc96 Author: Harry Wentland Date: Tue May 5 11:50:07 2026 -0400 drm/amd/display: Reject gpio_bitshift >= 32 in bios_parser_get_gpio_pin_info() commit 49c3da65961fe9857c831d47fa1989084e87514a upstream. [Why & How] gpio_bitshift is a uint8_t read directly from the VBIOS GPIO pin table. If the value is >= 32, the expression "1 << gpio_bitshift" triggers undefined behaviour in C (shift count exceeds type width). On x86 the shift is silently masked to 5 bits, producing an incorrect GPIO mask that may cause wrong MMIO register bits to be toggled. Validate gpio_bitshift before use and return BP_RESULT_BADBIOSTABLE for out-of-range values. Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit eadf438ab8d370b9d19acee9359918c85afeb80d) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 117743d62e1225e208568a3ffc2c07214f1347cb Author: Takashi Iwai Date: Sat Jun 6 18:11:41 2026 +0200 ALSA: timer: Fix UAF at snd_timer_user_params() commit 053a401b592be424fea9d57c789f66cd5d8cec11 upstream. At releasing a timer object, e.g. when a userspace timer (CONFIG_SND_UTIMER) gets closed and snd_timer_free() is called, it tries to detach the timer instances and release the resources. However, it's still possible that other in-flight tasks are holding the timer instance where the to-be-deleted timer object is associated, and this may lead to racy accesses. Fortunately, most of ioctls dealing with the timer instance list already have the protection with register_mutex, and this also avoids such races. But, SNDRV_TIMER_IOCTL_PARAMS isn't protected, hence the concurrent ioctl may lead to use-after-free. This patch just adds the guard with register_mutex to protect snd_timer_user_params() for covering the code path as a quick workaround. It's no hot-path but rather a rarely issued ioctl, so the performance penalty doesn't matter. Reported-by: Kyle Zeng Tested-by: Kyle Zeng Cc: Link: https://patch.msgid.link/20260606161145.1933447-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 0a57320f71941d4e0b1307453c9a1f0939afe666 Author: HyeongJun An Date: Mon Jun 8 18:09:26 2026 +0900 USB: serial: kl5kusb105: fix bulk-out buffer overflow commit 96d47e40bf9db4a9efd5c8fb53287a508d165f14 upstream. klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 5d1d590e2f306443b2e22bbe0134bbb74d80fc45 Author: Jack Wu Date: Thu Jun 4 10:04:40 2026 +0800 USB: serial: option: add usb-id for Dell Wireless DW5826e-m commit 1938fb9fe38c4f04a3f30bea44f8071c80a63be4 upstream. Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=81ea Rev= 5.04 S: Manufacturer=DELL S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A S: SerialNumber=358988870177734 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Reviewed-by: Lars Melin Cc: stable@vger.kernel.org [ johan: reserve also interface 4 ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit b7faf660eefa2047ebc2959ff76da2b6eae2e9e3 Author: Adrian Korwel Date: Mon May 25 09:58:32 2026 -0500 USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr() commit 0fd2b00b2d3d05e3eaa13342b3dfb0fa85c226ae upstream. build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 561edb021486e6723d841926aa4b48097da06190 Author: Adrian Korwel Date: Mon May 25 09:58:31 2026 -0500 USB: serial: io_ti: fix heap overflow in get_manuf_info() commit 183c1076eca43bbb3e7bdf597456f91d81c73e74 upstream. get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel [ johan: amend commit message; also check for short descriptors ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1777ceac4bea5e568a5ad44b7f9bb219c1db21b6 Author: Wyatt Feng Date: Wed Jun 3 00:46:27 2026 +0800 xfrm: espintcp: do not reuse an in-progress partial send commit c381039ade2e161ab08c0eda73c4f8b9a7115928 upstream. espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Assisted-by: Codex:GPT-5.4 Signed-off-by: Wyatt Feng Signed-off-by: Ren Wei Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 1ec8fc63e9cdb22da54e48e536c9204020416fc6 Author: Joonas Lahtinen Date: Wed Jun 10 09:03:14 2026 +0300 drm/i915/gem: Fix phys BO pread/pwrite with offset commit d21ad938398bca695a511307de38a65889e3b354 upstream. sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. Reported-by: Matthew Wilcox (Oracle) Fixes: c6790dc22312 ("drm/i915: Wean off drm_pci_alloc/drm_pci_free") Cc: # v4.5+ Cc: Tvrtko Ursulin Cc: Simona Vetter Cc: Jani Nikula Cc: Rodrigo Vivi Signed-off-by: Joonas Lahtinen Reviewed-by: Tvrtko Ursulin Link: https://patch.msgid.link/20260610060314.26111-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) Signed-off-by: Tvrtko Ursulin Signed-off-by: Greg Kroah-Hartman commit fa5823126239b3e453fac1a2fe50726c7f4a55e1 Author: Michael Bommarito Date: Thu May 21 10:45:17 2026 -0400 Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig commit dd214733544427587a95f66dbf3adff072568990 upstream. net/bluetooth/l2cap_core.c:l2cap_sig_channel() accepts BR/EDR signaling packets up to the channel MTU and dispatches each command without enforcing the signaling MTU (MTUsig). A Bluetooth BR/EDR peer within radio range can send a fixed-channel CID 0x0001 packet that is larger than MTUsig and contains many L2CAP_ECHO_REQ commands before pairing. In a real-radio stock-kernel run, one 681-byte signaling packet containing 168 zero-length ECHO_REQ commands made the target transmit 168 ECHO_RSP frames over about 220 ms. Impact: a Bluetooth BR/EDR peer within radio range, before pairing, can force 168 ECHO_RSP frames from one 681-byte fixed-channel signaling packet containing packed ECHO_REQ commands. Define Linux's BR/EDR signaling MTU as the spec minimum of 48 bytes and reject any larger signaling packet with one L2CAP_COMMAND_REJECT_RSP carrying L2CAP_REJ_MTU_EXCEEDED before any command is dispatched. The Bluetooth Core spec wording for MTUExceeded says the reject identifier shall match the first request command in the packet, and that packets containing only responses shall be silently discarded. Linux intentionally deviates from that prescription: silently discarding desynchronizes the peer because the remote stack never learns its responses were dropped, and locating the first request command requires walking command headers past MTUsig, i.e. processing bytes from a packet we have already decided is too large to process. We therefore always emit one reject and use the identifier from the first command header, a single fixed-offset byte read. The unrestricted BR/EDR signaling parser and ECHO_REQ response path both trace to the initial git import; no later introducing commit is available for a Fixes tag. Cc: stable@vger.kernel.org Suggested-by: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20260518002800.1361430-1-michael.bommarito@gmail.com Link: https://lore.kernel.org/r/20260520135034.1060859-1-michael.bommarito@gmail.com Link: https://lore.kernel.org/r/20260521000555.3712030-1-michael.bommarito@gmail.com Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-5-xhigh Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 55b79b1ae42372012413ce0413181d26679b17ef Author: Tristan Madani Date: Wed May 27 13:57:50 2026 +0000 netfilter: nft_tunnel: fix use-after-free on object destroy commit c32b26aaa2f9216520a38b3f4bfeec846eb3eb8a upstream. nft_tunnel_obj_destroy() calls metadata_dst_free() which directly kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets that took a reference via dst_hold() in nft_tunnel_obj_eval() and are still queued (e.g. in a netem qdisc) are left with a dangling pointer. When these packets are eventually dequeued, dst_release() operates on freed memory. Replace metadata_dst_free() with dst_release() so the metadata_dst is freed only after all references are dropped. The dst subsystem already handles metadata_dst cleanup in dst_destroy() when DST_METADATA is set. Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 30165a09f76eaf34951c818eb5d9d6e4771d76f6 Author: Alexander A. Klimov Date: Sat Jun 6 14:38:10 2026 +0200 drm/vc4: fix krealloc() memory leak [ Upstream commit 5d563a5da8717629ae72f9eadf1e0e340bd1658b ] Don't just overwrite the original pointer passed to krealloc() with its return value without checking latter: MEM = krealloc(MEM, SZ, GFP); If krealloc() returns NULL, that erases the pointer to the still allocated memory, hence leaks this memory. Instead, use a temporary variable, check it's not NULL and only then assign it to the original pointer: TMP = krealloc(MEM, SZ, GFP); if (!TMP) return; MEM = TMP; While on it, use krealloc_array(). Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.") Signed-off-by: Alexander A. Klimov Signed-off-by: Maíra Canal Link: https://patch.msgid.link/20260606123817.37222-1-grandmaster@al2klimov.de Signed-off-by: Sasha Levin commit 164339c9270908cd791db1f1bd1ea9132532b3bd Author: Til Kaiser Date: Sun Jun 7 15:49:43 2026 +0200 net: mvpp2: build skb from XDP-adjusted data on XDP_PASS [ Upstream commit 77a6b90ce56bc982dcfa94229b8e28e6abb16e95 ] When an XDP program uses bpf_xdp_adjust_head() or bpf_xdp_adjust_tail() and then returns XDP_PASS, mvpp2 still builds the skb from fixed offsets derived from the original RX descriptor. Packet geometry changes made by the XDP program are therefore discarded before the skb reaches the stack. Update rx_offset and rx_bytes from xdp.data and xdp.data_end for XDP_PASS. This makes skb_reserve() and skb_put() reflect the packet seen by XDP, and makes RX byte accounting for XDP_PASS follow the length of the skb passed to the network stack. Keep a separate rx_sync_size for page-pool recycling on skb allocation failure, which must stay tied to the received buffer range. Non-PASS verdicts continue to account the descriptor length because no skb is passed up in those cases. Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-5-mail@tk154.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit a88b3293b556f4d8fba11db9a8061a6b0d3b69e6 Author: Til Kaiser Date: Sun Jun 7 15:49:42 2026 +0200 net: mvpp2: refill RX buffers before XDP or skb use [ Upstream commit 5e8e2a9624df72fca7c736b2966b2cbf6c9c3ff6 ] The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Fixes: d6526926de73 ("net: mvpp2: fix memory leak in mvpp2_rx") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-4-mail@tk154.de Signed-off-by: Paolo Abeni Stable-dep-of: 77a6b90ce56b ("net: mvpp2: build skb from XDP-adjusted data on XDP_PASS") Signed-off-by: Sasha Levin commit 4051c3689f94ce131a2fcfe3b78141208d0cd876 Author: Lorenzo Bianconi Date: Tue Mar 18 12:46:06 2025 +0100 net: mvpp2: Add metadata support for xdp mode [ Upstream commit 9a45e193c88a55a536d7fd0ebfa29823d588c2cf ] Set metadata size building the skb from xdp_buff in mvpp2 driver mvpp2 driver sets xdp headroom to: MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM where MVPP2_MH_SIZE 2 MVPP2_SKB_HEADROOM min(max(XDP_PACKET_HEADROOM, NET_SKB_PAD), 224) so the headroom is large enough to contain xdp_frame and xdp metadata. Please note this patch is just compiled tested. Reviewed-by: Michal Kubiak Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20250318-mvneta-xdp-meta-v2-2-b6075778f61f@kernel.org Signed-off-by: Jakub Kicinski Stable-dep-of: 77a6b90ce56b ("net: mvpp2: build skb from XDP-adjusted data on XDP_PASS") Signed-off-by: Sasha Levin commit a3ee9231ccec6ec3be2de89c56f897055fd9eab1 Author: Til Kaiser Date: Sun Jun 7 15:49:41 2026 +0200 net: mvpp2: limit XDP frame size to the RX buffer [ Upstream commit f3c6aa078927e6fe8121c9c591ddee8716c5305a ] mvpp2 has short and long BM pools, and short pool buffers can be smaller than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with PAGE_SIZE as frame size. XDP helpers use frame_sz to validate tail growth and to derive the hard end of the data area. Advertising PAGE_SIZE for short buffers can let bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting memory or later tripping skb tailroom checks. Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches the actual buffer backing the packet. Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-3-mail@tk154.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 19f8bc139e9b149d1e5bf75ae761d1bb8dd3e7d8 Author: Til Kaiser Date: Sun Jun 7 15:49:40 2026 +0200 net: mvpp2: sync RX data at the hardware packet offset [ Upstream commit 180235600934bef6add3be637c296d6cf3272e67 ] mvpp2 programs the RX queue packet offset, so hardware writes received data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the unused headroom and misses the same number of bytes at the packet tail. On non-coherent DMA systems this can leave the CPU reading stale cache contents for the end of the received frame. Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range offset so the sync covers the Marvell header and packet data actually written by hardware. Fixes: e1921168bbd4 ("mvpp2: sync only the received frame") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-2-mail@tk154.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 19748967d59c31d24d21d40b728570788310b237 Author: Florian Westphal Date: Tue Jun 9 21:28:09 2026 +0200 netfilter: nft_exthdr: fix register tracking for F_PRESENT flag [ Upstream commit 772cecf198da732faebb5dcfc46d66a505be8495 ] nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. Reported-by: Ji'an Zhou Fixes: c078ca3b0c5b ("netfilter: nft_exthdr: Add support for existence check") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit d704ee9c7bc68a161684c51a7ac05b446dcf38d4 Author: Xiang Mei Date: Tue Jun 9 15:55:02 2026 -0700 netfilter: nf_log: validate MAC header was set before dumping it [ Upstream commit a84b6fedbc97078788be78dbdd7517d143ad1a77 ] The fallback path of dump_mac_header() guards the MAC header access only with "skb->mac_header != skb->network_header", without checking skb_mac_header_was_set(). When the MAC header is unset, mac_header is 0xffff, so the test passes and skb_mac_header(skb) returns skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads dev->hard_header_len bytes out of bounds into the kernel log. This is reachable via the netdev logger: nf_log_unknown_packet() calls dump_mac_header() unconditionally, and an skb sent through AF_PACKET with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still unset (__dev_queue_xmit(), which would reset it, is bypassed). Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already uses, and replace the open-coded MAC header length test with skb_mac_header_len(). Only skbs with an unset MAC header are affected; valid ones are dumped as before. BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831) Read of size 1 at addr ffff88800ea49d3f by task exploit/148 Call Trace: kasan_report (mm/kasan/report.c:595) dump_mac_header (net/netfilter/nf_log_syslog.c:831) nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963) nf_log_packet (net/netfilter/nf_log.c:260) nft_log_eval (net/netfilter/nft_log.c:60) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307) nf_hook_slow (net/netfilter/core.c:619) nf_hook_direct_egress (net/packet/af_packet.c:257) packet_xmit (net/packet/af_packet.c:280) packet_sendmsg (net/packet/af_packet.c:3114) __sys_sendto (net/socket.c:2265) Fixes: 7eb9282cd0ef ("netfilter: ipt_LOG/ip6t_LOG: add option to print decoded MAC header") Reported-by: Weiming Shi Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Xiang Mei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 0b35dc8527ccc16b7dc34e8a3164313e68cd4e45 Author: Kyle Zeng Date: Sat Jun 6 01:10:31 2026 -0700 netfilter: x_tables: avoid leaking percpu counter pointers [ Upstream commit f7f2fbb0e893a0238dc464f8d8c0f5609bec584f ] The native and compat get-entries paths copy the fixed rule entry header from the kernelized rule blob to userspace before overwriting the entry's counter fields with a sanitized counter snapshot. On SMP kernels, entry->counters.pcnt contains the percpu allocation address used by x_tables rule counters. A caller can provide a userspace buffer that faults during the initial fixed-header copy after pcnt has been copied but before the later sanitized counter copy runs. The syscall then returns -EFAULT while leaving the raw percpu pointer in userspace. Copy only the fixed entry prefix before counters from the kernelized rule blob, then copy the sanitized counter snapshot into the counter field. Apply this ordering to the IPv4, IPv6, and ARP native and compat get-entries implementations so a fault cannot expose the internal percpu counter pointer. Fixes: 71ae0dff02d7 ("netfilter: xtables: use percpu rule counters") Signed-off-by: Kyle Zeng Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit c85e8d5e236575146002f351ae36c17cb100bd4d Author: Breno Leitao Date: Mon Jun 8 02:32:05 2026 -0700 rds: mark snapshot pages dirty in rds_info_getsockopt() [ Upstream commit 512db8267b73a220a64180d95ab5eebe7c4964a8 ] rds_info_getsockopt() pins the destination user pages with FOLL_WRITE and the RDS_INFO_* producers memcpy the snapshot into them through kmap_atomic(). Because that copy goes through the kernel direct map, the dirty bit on the user PTE is never set, so unpin_user_pages() releases the pages without marking them dirty. A file-backed destination page can then be reclaimed without writeback, silently discarding the copied data. Use unpin_user_pages_dirty_lock() with make_dirty=true so the modified pages are marked dirty before they are unpinned. Fixes: a8c879a7ee98 ("RDS: Info and stats") Signed-off-by: Breno Leitao Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260608-rds_fix-v1-1-006c88543408@debian.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fc657ac0767c49839b3ef0b08dc0953ca30883f8 Author: Eric Dumazet Date: Mon Jun 8 16:46:13 2026 +0000 ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup() [ Upstream commit a5c0359f5cbc51a2e2b114d6041e0f3c73f903e9 ] In vti6_tnl_lookup(), when an exact match for a tunnel fails, the code falls back to searching for wildcard tunnels: - Tunnels matching the packet's local address, with any remote address wildcard remote). - Tunnels matching the packet's remote address, with any local address (wildcard local). However, vti6 stores all these different types of tunnels in the same hash table (ip6n->tnls_r_l) prone to hash collisions. The bug is that the fallback search loops in vti6_tnl_lookup() were missing checks to ensure that the candidate tunnel actually has a wildcard address. Fixes: fbe68ee87522 ("vti6: Add a lookup method for tunnels with wildcard endpoints.") Signed-off-by: Eric Dumazet Cc: Steffen Klassert Reviewed-by: Nicolas Dichtel Link: https://patch.msgid.link/20260608164613.933023-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4dd262f875e87653df50b138de1390ab0628e6b7 Author: Weiming Shi Date: Sat Jun 6 12:24:48 2026 -0700 net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion [ Upstream commit 34080db3e70ddf94c38512ad2331e3c3afca6cc1 ] rds_ib_xmit_atomic() always programs a masked atomic opcode (IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD) for every RDS atomic cmsg. But the completion-side switch in rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked atomic completion falls through to default and returns rm == NULL while send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection triggers it; on hardware that natively accepts masked atomics (mlx4, mlx5) no extra setup is needed. RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR! Oops: general protection fault [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197] RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282) Call Trace: rds_ib_send_cqe_handler (net/rds/ib_send.c:282) poll_scq (net/rds/ib_cm.c:274) rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294) tasklet_action_common (kernel/softirq.c:943) handle_softirqs (kernel/softirq.c:573) run_ksoftirqd (kernel/softirq.c:479) Kernel panic - not syncing: Fatal exception in interrupt Handle the masked atomic opcodes in the same case as the non-masked ones: they map to the same struct rds_message.atomic union member, so the existing container_of()/rds_ib_send_unmap_atomic() body is correct for them. Fixes: 20c72bd5f5f9 ("RDS: Implement masked atomic operations") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260606192447.1179255-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 71ff5cdd5da61d0438e902aa0fd68c28bc901abe Author: Kyle Zeng Date: Sat Jun 6 19:18:19 2026 -0700 net: guard timestamp cmsgs to real error queue skbs [ Upstream commit 1ee90b77b727df903033db873c75caac5c27ec98 ] skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership. Fixes: 8605330aac5a ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs") Signed-off-by: Kyle Zeng Reviewed-by: Kuniyuki Iwashima Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 928dd94db23e8ba340f83d68f7f24d831b7a4426 Author: Michael Bommarito Date: Mon Jun 8 08:22:34 2026 -0400 sctp: fix uninit-value in __sctp_rcv_asconf_lookup() [ Upstream commit f8373d7090b745728de66308deeecc67e8d319ce ] __sctp_rcv_asconf_lookup() in net/sctp/input.c only checks that the ASCONF chunk can hold the ADDIP header and a parameter header, then calls af->from_addr_param(), which reads the full address (16 bytes for IPv6) trusting the parameter's declared length. An unauthenticated peer can send a truncated trailing ASCONF chunk that declares an IPv6 address parameter but stops after the 4-byte parameter header; reached from the no-association lookup path, from_addr_param() then reads uninitialized bytes past the parameter. Impact: an unauthenticated SCTP peer makes the receive path read up to 16 bytes of uninitialized memory past a truncated ASCONF address parameter. The sibling __sctp_rcv_init_lookup() bounds parameters with sctp_walk_params(); this path open-codes the fetch and omits the bound. Verify the whole address parameter lies within the chunk before from_addr_param() reads it, the same class of fix as commit 51e5ad549c43 ("net: sctp: fix KMSAN uninit-value in sctp_inq_pop"). Fixes: df2185771439 ("[SCTP]: Update association lookup to look at ASCONF chunks as well") Signed-off-by: Michael Bommarito Acked-by: Xin Long Link: https://patch.msgid.link/20260608122234.459098-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0bb5b2dc1b90aa7dd1473fc8c4d813a29255ff8d Author: Adrian Moreno Date: Thu Jun 4 14:19:46 2026 +0200 net: openvswitch: fix possible kfree_skb of ERR_PTR [ Upstream commit ee30dd2909d8b98619f4341c70ec8dc8e155ab02 ] After the patch in the "Fixes" tag, the allocation of the "reply" skb can happen either before or after locking the ovs_mutex. However, error cleanups still follow the classical reversed order, assuming "reply" is allocated before locking: it is freed after unlocking. If "reply" allocation happens after locking the mutex and it fails, "reply" is left with an ERR_PTR, and execution jumps to the correspondent cleanup stage which will try to free an invalid pointer. Fix this by setting the pointer to NULL after having saved its error value. Fixes: 893f139b9a6c ("openvswitch: Minimize ovs_flow_cmd_new|set critical sections.") Signed-off-by: Adrian Moreno Reviewed-by: Aaron Conole Acked-by: Eelco Chaudron Link: https://patch.msgid.link/20260604121946.942164-1-amorenoz@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1132e5edc2866c3530be17622153a597095f0e43 Author: Kyle Zeng Date: Fri Jun 5 00:34:48 2026 -0700 ipv6: sit: reload inner IPv6 header after GSO offloads [ Upstream commit f0e42f0c4337b1f220de1ddd63f47197c7dee4de ] ipip6_tunnel_xmit() caches the inner IPv6 header pointer at function entry and continues using it after iptunnel_handle_offloads(). For GSO skbs, iptunnel_handle_offloads() calls skb_header_unclone(). When the skb header is cloned, skb_header_unclone() can call pskb_expand_head(), which may move the skb head. The pskb_expand_head() contract requires pointers into the skb header to be reloaded after the call. If the later skb_realloc_headroom() branch is not taken, SIT uses the stale iph6 pointer to read the inner hop limit and DS field. That can read from a freed skb head after the old head's remaining clone is released. Reload iph6 after the offload helper succeeds and before subsequent reads from the inner IPv6 header. Keep the existing reload after skb_realloc_headroom(), since that branch can also replace the skb. Fixes: 14909664e4e1 ("sit: Setup and TX path for sit/UDP foo-over-udp encapsulation") Signed-off-by: Kyle Zeng Reviewed-by: Eric Dumazet Reported-by: syzbot+6eb9ca986d80f6f88cf9@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260605073448.6524-1-kylebot@openai.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 03bfa95e452e2b6ccd76a332060ae4feaf5ad84d Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Thu Jun 4 14:48:01 2026 +0800 net: qrtr: fix refcount saturation and potential UAF in qrtr_port_remove [ Upstream commit a2171131ecda1ed61a594a1eb715e75fdad0fef5 ] In qrtr_port_remove(), the socket reference count is decremented via __sock_put() before the port is removed from the qrtr_ports XArray and before the RCU grace period elapses. This breaks the fundamental RCU update paradigm. It exposes a race window where a concurrent RCU reader (such as qrtr_reset_ports() or qrtr_port_lookup()) can obtain a pointer to the socket from the XArray, and attempt to call sock_hold() on a socket whose reference count has already dropped to zero. This exact race condition was hit during syzkaller fuzzing, leading to the following refcount saturation warning and a potential Use-After-Free: refcount_t: saturated; leaking memory. WARNING: CPU: 3 PID: 1273 at lib/refcount.c:22 refcount_warn_saturate+0xae/0x1d0 Modules linked in: qrtr(+) bochs drm_shmem_helper ... Call Trace: qrtr_reset_ports net/qrtr/af_qrtr.c:768 [inline] [qrtr] __qrtr_bind.isra.0+0x48b/0x570 net/qrtr/af_qrtr.c:805 [qrtr] qrtr_bind+0x17d/0x210 net/qrtr/af_qrtr.c:901 [qrtr] kernel_bind+0xe4/0x120 net/socket.c:3592 qrtr_ns_init+0x1a6/0x380 net/qrtr/ns.c:715 [qrtr] qrtr_proto_init+0x3b/0xff0 net/qrtr/af_qrtr.c:169 [qrtr] do_one_initcall+0xf5/0x5e0 init/main.c:1283 ... Fix this by deferring the reference count decrement until after the xa_erase() and the synchronize_rcu() complete. (Note: The v1 of this patch incorrectly replaced __sock_put() with sock_put(). As Simon Horman pointed out, the callers of qrtr_port_remove() still hold a reference to the socket, so freeing the socket memory here would lead to a subsequent UAF in the caller. Thus, the __sock_put() is kept, but only repositioned to close the RCU race.) Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260604064801.1180388-1-w15303746062@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 672f0f3b8f875ffe6525a37847eafa7648c4c0c6 Author: Chenguang Zhao Date: Wed Jun 3 09:13:53 2026 +0800 netlabel: validate unlabeled address and mask attribute lengths [ Upstream commit 9772589b57e44aedc240211c5c3f7a684a034d3a ] netlbl_unlabel_addrinfo_get() used the address attribute length to determine whether the attribute data could be read as an IPv4 or IPv6 address, but did not independently validate the corresponding mask attribute length. A crafted Generic Netlink request could therefore provide a valid IPv4/IPv6 address attribute with a shorter mask attribute, which would later be read as a full struct in_addr or struct in6_addr. NLA_BINARY policy lengths are maximum lengths by default, so use NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask attributes. This rejects short attributes during policy validation and also exposes the exact length requirements through policy introspection. Fixes: 8cc44579d1bd ("NetLabel: Introduce static network labels for unlabeled connections") Signed-off-by: Chenguang Zhao Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c4c1ea36d83bf3c4569468ca5b8b614fda1bf821 Author: Sanghyun Park Date: Tue Jun 2 18:49:05 2026 +0900 xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx() [ Upstream commit 7f2d76c9c03257c0782afef9d95321fa04096f60 ] Fix the race by pruning the bin while still holding xfrm_policy_lock, before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since the lock is already held. The wrapper xfrm_policy_inexact_prune_bin() becomes unused and is removed. Race: CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO) ========================== ========================== xfrm_policy_bysel_ctx(): spin_lock_bh(xfrm_policy_lock) bin = xfrm_policy_inexact_lookup() __xfrm_policy_unlink(pol) spin_unlock_bh(xfrm_policy_lock) xfrm_policy_kill(ret) // wide window, lock not held xfrm_hash_rebuild(): spin_lock_bh(xfrm_policy_lock) __xfrm_policy_inexact_flush(): kfree_rcu(bin) // bin freed spin_unlock_bh(xfrm_policy_lock) xfrm_policy_inexact_prune_bin(bin) // UAF: bin is freed Fixes: 6be3b0db6db8 ("xfrm: policy: add inexact policy search tree infrastructure") Signed-off-by: Sanghyun Park Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit dbf672e0dec26a9755444fddee54aa7862b4de10 Author: Mark Rutland Date: Thu Jun 11 14:47:06 2026 +0100 arm64: tlb: Optimize ARM64_WORKAROUND_REPEAT_TLBI commit a8f78680ee6bf795086384e8aea159a52814f827 upstream. The ARM64_WORKAROUND_REPEAT_TLBI workaround is used to mitigate several errata where broadcast TLBI;DSB sequences don't provide all the architecturally required synchronization. The workaround performs more work than necessary, and can have significant overhead. This patch optimizes the workaround, as explained below. The workaround was originally added for Qualcomm Falkor erratum 1009 in commit: d9ff80f83ecb ("arm64: Work around Falkor erratum 1009") As noted in the message for that commit, the workaround is applied even in cases where it is not strictly necessary. The workaround was later reused without changes for: * Arm Cortex-A76 erratum #1286807 SDEN v33: https://developer.arm.com/documentation/SDEN-885749/33-0/ * Arm Cortex-A55 erratum #2441007 SDEN v16: https://developer.arm.com/documentation/SDEN-859338/1600/ * Arm Cortex-A510 erratum #2441009 SDEN v19: https://developer.arm.com/documentation/SDEN-1873351/1900/ The important details to note are as follows: 1. All relevant errata only affect the ordering and/or completion of memory accesses which have been translated by an invalidated TLB entry. The actual invalidation of TLB entries is unaffected. 2. The existing workaround is applied to both broadcast and local TLB invalidation, whereas for all relevant errata it is only necessary to apply a workaround for broadcast invalidation. 3. The existing workaround replaces every TLBI with a TLBI;DSB;TLBI sequence, whereas for all relevant errata it is only necessary to execute a single additional TLBI;DSB sequence after any number of TLBIs are completed by a DSB. For example, for a sequence of batched TLBIs: TLBI [, ] TLBI [, ] TLBI [, ] DSB ISH ... the existing workaround will expand this to: TLBI [, ] DSB ISH // additional TLBI [, ] // additional TLBI [, ] DSB ISH // additional TLBI [, ] // additional TLBI [, ] DSB ISH // additional TLBI [, ] // additional DSB ISH ... whereas it is sufficient to have: TLBI [, ] TLBI [, ] TLBI [, ] DSB ISH TLBI [, ] // additional DSB ISH // additional Using a single additional TBLI and DSB at the end of the sequence can have significantly lower overhead as each DSB which completes a TLBI must synchronize with other PEs in the system, with potential performance effects both locally and system-wide. 4. The existing workaround repeats each specific TLBI operation, whereas for all relevant errata it is sufficient for the additional TLBI to use *any* operation which will be broadcast, regardless of which translation regime or stage of translation the operation applies to. For example, for a single TLBI: TLBI ALLE2IS DSB ISH ... the existing workaround will expand this to: TLBI ALLE2IS DSB ISH TLBI ALLE2IS // additional DSB ISH // additional ... whereas it is sufficient to have: TLBI ALLE2IS DSB ISH TLBI VALE1IS, XZR // additional DSB ISH // additional As the additional TLBI doesn't have to match a specific earlier TLBI, the additional TLBI can be implemented in separate code, with no memory of the earlier TLBIs. The additional TLBI can also use a cheaper TLBI operation. 5. The existing workaround is applied to both Stage-1 and Stage-2 TLB invalidation, whereas for all relevant errata it is only necessary to apply a workaround for Stage-1 invalidation. Architecturally, TLBI operations which invalidate only Stage-2 information (e.g. IPAS2E1IS) are not required to invalidate TLB entries which combine information from Stage-1 and Stage-2 translation table entries, and consequently may not complete memory accesses translated by those combined entries. In these cases, completion of memory accesses is only guaranteed after subsequent invalidation of Stage-1 information (e.g. VMALLE1IS). Taking the above points into account, this patch reworks the workaround logic to reduce overhead: * New __tlbi_sync_s1ish() and __tlbi_sync_s1ish_hyp() functions are added and used in place of any dsb(ish) which is used to complete broadcast Stage-1 TLB maintenance. When the ARM64_WORKAROUND_REPEAT_TLBI workaround is enabled, these helpers will execute an additional TLBI;DSB sequence. For consistency, it might make sense to add __tlbi_sync_*() helpers for local and stage 2 maintenance. For now I've left those with open-coded dsb() to keep the diff small. * The duplication of TLBIs in __TLBI_0() and __TLBI_1() is removed. This is no longer needed as the necessary synchronization will happen in __tlbi_sync_s1ish() or __tlbi_sync_s1ish_hyp(). * The additional TLBI operation is chosen to have minimal impact: - __tlbi_sync_s1ish() uses "TLBI VALE1IS, XZR". This is only used at EL1 or at EL2 with {E2H,TGE}=={1,1}, where it will target an unused entry for the reserved ASID in the kernel's own translation regime, and have no adverse affect. - __tlbi_sync_s1ish_hyp() uses "TLBI VALE2IS, XZR". This is only used in hyp code, where it will target an unused entry in the hyp code's TTBR0 mapping, and should have no adverse effect. * As __TLBI_0() and __TLBI_1() no longer replace each TLBI with a TLBI;DSB;TLBI sequence, batching TLBIs is worthwhile, and there's no need for arch_tlbbatch_should_defer() to consider ARM64_WORKAROUND_REPEAT_TLBI. When building defconfig with GCC 15.1.0, compared to v6.19-rc1, this patch saves ~1KiB of text, makes the vmlinux ~42KiB smaller, and makes the resulting Image 64KiB smaller: | [mark@lakrids:~/src/linux]% size vmlinux-* | text data bss dec hex filename | 21179831 19660919 708216 41548966 279fca6 vmlinux-after | 21181075 19660903 708216 41550194 27a0172 vmlinux-before | [mark@lakrids:~/src/linux]% ls -l vmlinux-* | -rwxr-xr-x 1 mark mark 157771472 Feb 4 12:05 vmlinux-after | -rwxr-xr-x 1 mark mark 157815432 Feb 4 12:05 vmlinux-before | [mark@lakrids:~/src/linux]% ls -l Image-* | -rw-r--r-- 1 mark mark 41007616 Feb 4 12:05 Image-after | -rw-r--r-- 1 mark mark 41073152 Feb 4 12:05 Image-before Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Marc Zyngier Cc: Oliver Upton Cc: Ryan Roberts Cc: Will Deacon Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman [Mark: Backport to v5.15.y; use inline ALTERNATIVE() sequence] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit e4e7fdfb85cfb6d196279794fe8b862c51fcd08a Author: Mark Rutland Date: Thu Jun 11 14:47:05 2026 +0100 arm64: tlb: Allow XZR argument to TLBI ops commit bfd9c931d19aa59fb8371d557774fa169b15db9a upstream. The TLBI instruction accepts XZR as a register argument, and for TLBI operations with a register argument, there is no functional difference between using XZR or another GPR which contains zeroes. Operations without a register argument are encoded as if XZR were used. Allow the __TLBI_1() macro to use XZR when a register argument is all zeroes. Today this only results in a trivial code saving in __do_compat_cache_op()'s workaround for Neoverse-N1 erratum #1542419. In subsequent patches this pattern will be used more generally. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Marc Zyngier Cc: Oliver Upton Cc: Ryan Roberts Cc: Will Deacon Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman [Mark: Backport to v5.15.y] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 55469cd78aeff53cc830c10d8f41b7a65af1cf5b Author: Marc Zyngier Date: Thu Jun 11 14:47:04 2026 +0100 KVM: arm64: Remove VPIPT I-cache handling commit ced242ba9d7cb3571f6e0f165f643cb832d52148 upstream. We have some special handling for VPIPT I-cache in critical parts of the cache and TLB maintenance. Remove it. Reviewed-by: Zenghui Yu Reviewed-by: Anshuman Khandual Signed-off-by: Marc Zyngier Acked-by: Mark Rutland Link: https://lore.kernel.org/r/20231204143606.1806432-2-maz@kernel.org Signed-off-by: Will Deacon [Mark: Backport to v5.15.y. VPIPT HW was never built; this is all dead code] Signed-off-by: Mark Rutland Signed-off-by: Sasha Levin commit 793385c154771603b8671dd8338927221e9d8d78 Author: Weiming Shi Date: Thu Jun 11 06:28:53 2026 -0700 tun: free page on build_skb failure in tun_xdp_one() [ Upstream commit aa8963fdce667a42fb7f0bdd2909fadcab02f9a8 ] When build_skb() fails in tun_xdp_one(), the function sets ret to -ENOMEM and jumps to the out label, which returns without freeing the page that vhost_net_build_xdp() allocated for the frame. As with the short-frame rejection path, tun_sendmsg() discards the per-buffer error and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page. Each build_skb() failure in a batch leaks one page-frag chunk. Free the page before taking the error path, matching the put_page() the other error exits of tun_xdp_one() already perform. Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Dongli Zhang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260521163312.1479805-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski (cherry picked from commit aa8963fdce667a42fb7f0bdd2909fadcab02f9a8) [Harshit: Backport to 5.15.y/5.10.y, use err instead of ret, no change needed] Signed-off-by: Harshit Mogalapalli Signed-off-by: Sasha Levin commit f979971835dddbca86cf99e3b2e2b94a408a1ab2 Author: Weiming Shi Date: Thu Jun 11 06:21:06 2026 -0700 tap: free page on error paths in tap_get_user_xdp() [ Upstream commit 3bcf7aec6a9d16438f2cec29f5d7c8d5b8edf9b2 ] tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL, and returns -ENOMEM when build_skb() fails. Both paths jump to the err label without freeing the page that vhost_net_build_xdp() allocated for the frame. tap_sendmsg() discards the per-buffer return value and always returns 0, so vhost_tx_batch() takes the success path and never frees the page; each rejected frame in a batch leaks one page-frag chunk. Free the page on both error paths, before the skb is built. This is the tap counterpart of the same leak in tun_xdp_one(). Fixes: 0efac27791ee ("tap: accept an array of XDP buffs through sendmsg()") Fixes: ed7f2afdd0e0 ("tap: add missing verification for short frame") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Dongli Zhang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260521163230.1478627-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski (cherry picked from commit 3bcf7aec6a9d16438f2cec29f5d7c8d5b8edf9b2) Signed-off-by: Harshit Mogalapalli Signed-off-by: Sasha Levin commit e4316bd85e42b01125b2aab691769234a388b8a3 Author: Jeff Layton Date: Tue Jun 9 20:23:54 2026 +0300 nfsd: don't ignore the return code of svc_proc_register() commit 930b64ca0c511521f0abdd1d57ce52b2a6e3476b upstream. Currently, nfsd_proc_stat_init() ignores the return value of svc_proc_register(). If the procfile creation fails, then the kernel will WARN when it tries to remove the entry later. Fix nfsd_proc_stat_init() to return the same type of pointer as svc_proc_register(), and fix up nfsd_net_init() to check that and fail the nfsd_net construction if it occurs. svc_proc_register() can fail if the dentry can't be allocated, or if an identical dentry already exists. The second case is pretty unlikely in the nfsd_net construction codepath, so if this happens, return -ENOMEM. Reported-by: syzbot+e34ad04f27991521104c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-nfs/67a47501.050a0220.19061f.05f9.GAE@google.com/ Cc: stable@vger.kernel.org # v6.9 Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Vladislav Nikolaev Signed-off-by: Sasha Levin commit 6557c4504c5a1bbbbac25d14d7dcf2a4912d1508 Author: Edward Lo Date: Fri Mar 17 18:23:03 2023 +0800 fs/ntfs3: Return error for inconsistent extended attributes [ Upstream commit c9db0ff04649aa0b45f497183c957fe260f229f6 ] ntfs_read_ea is called when we want to read extended attributes. There are some sanity checks for the validity of the EAs. However, it fails to return a proper error code for the inconsistent attributes, which might lead to unpredicted memory accesses after return. [ 138.916927] BUG: KASAN: use-after-free in ntfs_set_ea+0x453/0xbf0 [ 138.923876] Write of size 4 at addr ffff88800205cfac by task poc/199 [ 138.931132] [ 138.933016] CPU: 0 PID: 199 Comm: poc Not tainted 6.2.0-rc1+ #4 [ 138.938070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 138.947327] Call Trace: [ 138.949557] [ 138.951539] dump_stack_lvl+0x4d/0x67 [ 138.956834] print_report+0x16f/0x4a6 [ 138.960798] ? ntfs_set_ea+0x453/0xbf0 [ 138.964437] ? kasan_complete_mode_report_info+0x7d/0x200 [ 138.969793] ? ntfs_set_ea+0x453/0xbf0 [ 138.973523] kasan_report+0xb8/0x140 [ 138.976740] ? ntfs_set_ea+0x453/0xbf0 [ 138.980578] __asan_store4+0x76/0xa0 [ 138.984669] ntfs_set_ea+0x453/0xbf0 [ 138.988115] ? __pfx_ntfs_set_ea+0x10/0x10 [ 138.993390] ? kernel_text_address+0xd3/0xe0 [ 138.998270] ? __kernel_text_address+0x16/0x50 [ 139.002121] ? unwind_get_return_address+0x3e/0x60 [ 139.005659] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 139.010177] ? arch_stack_walk+0xa2/0x100 [ 139.013657] ? filter_irq_stacks+0x27/0x80 [ 139.017018] ntfs_setxattr+0x405/0x440 [ 139.022151] ? __pfx_ntfs_setxattr+0x10/0x10 [ 139.026569] ? kvmalloc_node+0x2d/0x120 [ 139.030329] ? kasan_save_stack+0x41/0x60 [ 139.033883] ? kasan_save_stack+0x2a/0x60 [ 139.037338] ? kasan_set_track+0x29/0x40 [ 139.040163] ? kasan_save_alloc_info+0x1f/0x30 [ 139.043588] ? __kasan_kmalloc+0x8b/0xa0 [ 139.047255] ? __kmalloc_node+0x68/0x150 [ 139.051264] ? kvmalloc_node+0x2d/0x120 [ 139.055301] ? vmemdup_user+0x2b/0xa0 [ 139.058584] __vfs_setxattr+0x121/0x170 [ 139.062617] ? __pfx___vfs_setxattr+0x10/0x10 [ 139.066282] __vfs_setxattr_noperm+0x97/0x300 [ 139.070061] __vfs_setxattr_locked+0x145/0x170 [ 139.073580] vfs_setxattr+0x137/0x2a0 [ 139.076641] ? __pfx_vfs_setxattr+0x10/0x10 [ 139.080223] ? __kasan_check_write+0x18/0x20 [ 139.084234] do_setxattr+0xce/0x150 [ 139.087768] setxattr+0x126/0x140 [ 139.091250] ? __pfx_setxattr+0x10/0x10 [ 139.094948] ? __virt_addr_valid+0xcb/0x140 [ 139.097838] ? __call_rcu_common.constprop.0+0x1c7/0x330 [ 139.102688] ? debug_smp_processor_id+0x1b/0x30 [ 139.105985] ? kasan_quarantine_put+0x5b/0x190 [ 139.109980] ? putname+0x84/0xa0 [ 139.113886] ? __kasan_slab_free+0x11e/0x1b0 [ 139.117961] ? putname+0x84/0xa0 [ 139.121316] ? preempt_count_sub+0x1c/0xd0 [ 139.124427] ? __mnt_want_write+0xae/0x100 [ 139.127836] ? mnt_want_write+0x8f/0x150 [ 139.130954] path_setxattr+0x164/0x180 [ 139.133998] ? __pfx_path_setxattr+0x10/0x10 [ 139.137853] ? __pfx_ksys_pwrite64+0x10/0x10 [ 139.141299] ? debug_smp_processor_id+0x1b/0x30 [ 139.145714] ? fpregs_assert_state_consistent+0x6b/0x80 [ 139.150796] __x64_sys_setxattr+0x71/0x90 [ 139.155407] do_syscall_64+0x3f/0x90 [ 139.159035] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 139.163843] RIP: 0033:0x7f108cae4469 [ 139.166481] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 139.183764] RSP: 002b:00007fff87588388 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc [ 139.190657] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f108cae4469 [ 139.196586] RDX: 00007fff875883b0 RSI: 00007fff875883d1 RDI: 00007fff875883b6 [ 139.201716] RBP: 00007fff8758c530 R08: 0000000000000001 R09: 00007fff8758c618 [ 139.207940] R10: 0000000000000006 R11: 0000000000000286 R12: 00000000004004c0 [ 139.214007] R13: 00007fff8758c610 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Edward Lo Signed-off-by: Konstantin Komarov Signed-off-by: Sasha Levin commit c5839b34704c9c2f47f079451bdbb22de0da1ed1 Author: Tejas Bharambe Date: Tue Jun 9 19:44:30 2026 +0300 ext4: validate p_idx bounds in ext4_ext_correct_indexes commit 2acb5c12ebd860f30e4faf67e6cc8c44ddfe5fe8 upstream. ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. Reported-by: syzbot+04c4e65cab786a2e5b7e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=04c4e65cab786a2e5b7e Signed-off-by: Tejas Bharambe Link: https://patch.msgid.link/JH0PR06MB66326016F9B6AD24097D232B897CA@JH0PR06MB6632.apcprd06.prod.outlook.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org [ Alexey: Adapt goto clean to break because the clean error path is not present in linux-5.10.y and linux-5.15.y. ] Signed-off-by: Alexey Panov Signed-off-by: Sasha Levin commit a69e0b7ea34a3447ec05d397183303421d490abf Author: Naveen Kumar Chaudhary Date: Tue Jun 2 23:37:37 2026 +0530 time: Fix off-by-one in settimeofday() usec validation [ Upstream commit ce4abda5e12622f33450159e76c8f56d28d7f03d ] The validation check uses '>' instead of '>=' when comparing tv_usec against USEC_PER_SEC, allowing the value 1000000 through. After conversion to nanoseconds (*= 1000), this produces tv_nsec == NSEC_PER_SEC, violating the timespec invariant that tv_nsec must be less than NSEC_PER_SEC. Use '>=' to reject tv_usec values that are not in the valid range of 0 to 999999. Fixes: 5e0fb1b57bea ("y2038: time: avoid timespec usage in settimeofday()") Signed-off-by: Naveen Kumar Chaudhary Signed-off-by: Thomas Gleixner Acked-by: John Stultz Link: https://patch.msgid.link/4rikk44zew3s6577dugmx4jyblz7o5c57niuap6ct3td5yfm6w@gh7pcumg7qor Signed-off-by: Sasha Levin commit 391ebe74456a0f1d60b3ba4a8a64d9f44c1728fe Author: Aleksandr Nogikh Date: Thu May 21 16:22:40 2026 +0200 signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads() [ Upstream commit 90918794a4e2c3b440f8fcf3847765a8b1d81b25 ] When a multi-threaded process receives a stop signal (e.g., SIGSTOP), do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all threads and sets signal->group_stop_count to the number of threads. If one of the threads concurrently calls execve(), de_thread() invokes zap_other_threads() to kill all other threads. zap_other_threads() aborts the pending group stop by resetting signal->group_stop_count to 0 and clears the JOBCTL_PENDING_MASK for all other threads. However, it fails to clear the job control flags for the calling thread. When execve() completes, the calling thread returns to user mode and checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag, it calls do_signal_stop(), which invokes task_participate_group_stop(). Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the already-zero signal->group_stop_count, triggering a warning: sig->group_stop_count == 0 WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373 task_participate_group_stop+0x215/0x2d0 Call Trace: do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619 get_signal+0xa8c/0x1330 kernel/signal.c:2884 arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98 do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix this race condition by clearing the JOBCTL_PENDING_MASK for the calling thread in zap_other_threads(), ensuring it does not retain any stale job control state after the thread group is destroyed. This aligns with other functions that tear down a thread group and abort group stops, such as zap_process() and complete_signal(), which correctly clear these flags for all threads including the current one. Fixes: 39efa3ef3a37 ("signal: Use GROUP_STOP_PENDING to stop once for a single group stop") Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot Reported-by: syzbot+b109633ea805cac54a61@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b109633ea805cac54a61 Link: https://syzkaller.appspot.com/ai_job?id=d70208cc-862b-4fe3-bf02-3031e10cd0b3 Signed-off-by: Aleksandr Nogikh Link: https://patch.msgid.link/20260521142240.2973022-1-nogikh@google.com Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit f46e1d1a758878f0d22c4fbbd1bf42bb7165d1e8 Author: Xin Long Date: Wed Jun 3 14:11:44 2026 -0400 sctp: purge outqueue on stale COOKIE-ECHO handling [ Upstream commit e374b22e9b07b72a25909621464ff74096151bfb ] sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Zhengchuan Liang Reported-by: Xin Liu Reported-by: Yuqi Xu Reported-by: Ren Wei Signed-off-by: Xin Long Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 36d259711872e3b2f6cd76a4d270c21931c0f35f Author: Yizhou Zhao Date: Wed Jun 3 14:00:13 2026 +0800 net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr [ Upstream commit 7561c7fbc694308da73300f036719e63e42bf0b4 ] In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration. Fixes: febf018d2234 ("net/802: Implement Multiple Registration Protocol (MRP)") Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Signed-off-by: Yizhou Zhao Link: https://patch.msgid.link/20260603060016.21522-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3150e6d3223dfc356308125cabf9c34169842d2a Author: Eric Dumazet Date: Wed Jun 3 07:29:55 2026 +0000 ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit() [ Upstream commit 3a5f3f7aff18bcc36a57839cf50cf0cc8de707f3 ] The aoe driver (or similar) generates a non-IPv6 packet (e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit() on a 6LoWPAN interface (configured by the user or test case). Since the packet is not IPv6, the 6LoWPAN header_ops->create function (lowpan_header_create or header_create) returns early without initializing the lowpan_addr_info structure in the skb headroom. In the transmit function (lowpan_xmit), the driver calls lowpan_header (or setup_header) which unconditionally copies and uses the lowpan_addr_info from the headroom, which contains uninitialized data. Fix this by dropping non IPv6 packets. A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). Fixes: 4dc315e267fe ("ieee802154: 6lowpan: move transmit functionality") Reported-by: syzbot+f13c19f75e1097abd116@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a1fd763.278b5b03.2bcf39.0049.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260603072955.4032221-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2a87c3e8f03ce655ed0ef500d64d5fd924ec3691 Author: Eric Dumazet Date: Tue Jun 2 16:15:47 2026 +0000 ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options [ Upstream commit d3915a1f5a4bc0ac911032903c3c6ab8df9fcc7c ] This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Tamir Shahar Reported-by: Amit Klein Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260602161547.2642155-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5b7dfca6f852e6b9d809fd0263b5427cc9fb33fd Author: Bharath Reddy Date: Mon Jun 1 08:54:26 2026 +0530 Bluetooth: fix memory leak in error path of hci_alloc_dev() [ Upstream commit 37b3009bf5976e8ab77c8b9a9bc3bbd7ff49e37f ] Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device. Reported-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=535ecc844591e50588a5 Tested-by: syzbot+535ecc844591e50588a5@syzkaller.appspotmail.com Fixes: 1d6123102e9f ("Bluetooth: hci_core: Fix use-after-free in vhci_flush()") Signed-off-by: Bharath Reddy Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 0ef2ea86c82b2615902d085cd5a586fe9f58994f Author: Zhang Cen Date: Fri May 29 11:22:09 2026 +0800 Bluetooth: bnep: reject short frames before parsing [ Upstream commit 6770d3a8acdf9151769180cc3710346c4cfbe6f0 ] A BNEP peer can send a short BNEP SDU. bnep_rx_frame() reads the packet type byte immediately and, for control packets, reads the control opcode and setup UUID-size byte before proving that those bytes are present. bnep_rx_control() also dereferences the control opcode without rejecting an empty control payload. Use skb_pull_data() for the fixed fields in bnep_rx_frame() so a NULL return gates each dereference. Split the control handler so the frame path can pass an opcode that has already been pulled, and keep the byte-buffer wrapper for extension control payloads. For BNEP_SETUP_CONN_REQ, name the UUID-size byte before pulling the setup payload. struct bnep_setup_conn_req carries destination and source service UUIDs after that byte, each uuid_size bytes, so the parser now documents that tuple explicitly instead of leaving the pull length as an opaque multiplication. Validation reproduced this kernel report: KASAN slab-out-of-bounds in bnep_rx_frame.isra.0+0x130c/0x1790 The buggy address belongs to the object at ffff88800c0f7908 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 1-byte region [ffff88800c0f7908, ffff88800c0f7909) Read of size 1 Call trace: dump_stack_lvl+0xb3/0x140 (?:?) print_address_description+0x57/0x3a0 (?:?) bnep_rx_frame+0x130c/0x1790 (net/bluetooth/bnep/core.c:306) print_report+0xb9/0x2b0 (?:?) __virt_addr_valid+0x1ba/0x3a0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) kasan_addr_to_slab+0x21/0x60 (?:?) kasan_report+0xe0/0x110 (?:?) process_one_work+0xfce/0x17e0 (kernel/workqueue.c:3200) worker_thread+0x65c/0xe40 (?:?) __kthread_parkme+0x184/0x230 (?:?) kthread+0x35e/0x470 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) ret_from_fork+0x586/0x870 (?:?) __switch_to+0x74f/0xdc0 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 29ecc9d93cf4c91250dac3098306613cb1cbaaca Author: Dudu Lu Date: Wed Apr 15 17:39:53 2026 +0800 Bluetooth: bnep: fix incorrect length parsing in bnep_rx_frame() extension handling [ Upstream commit 72b8deccff17a7644e0367e1aaf1a36cfb014324 ] In bnep_rx_frame(), the BNEP_FILTER_NET_TYPE_SET and BNEP_FILTER_MULTI_ADDR_SET extension header parsing has two bugs: 1) The 2-byte length field is read with *(u16 *)(skb->data + 1), which performs a native-endian read. The BNEP protocol specifies this field in big-endian (network byte order), and the same file correctly uses get_unaligned_be16() for the identical fields in bnep_ctrl_set_netfilter() and bnep_ctrl_set_mcfilter(). 2) The length is multiplied by 2, but unlike BNEP_SETUP_CONN_REQ where the length byte counts UUID pairs (requiring * 2 for two UUIDs per entry), the filter extension length field already represents the total data size in bytes. This is confirmed by bnep_ctrl_set_netfilter() which reads the same field as a byte count and divides by 4 to get the number of filter entries. The bogus * 2 means skb_pull advances twice as far as it should, either dropping valid data from the next header or causing the pull to fail entirely when the doubled length exceeds the remaining skb. Fix by splitting the pull into two steps: first use skb_pull_data() to safely pull and validate the 3-byte fixed header (ctrl type + length), then pull the variable-length data using the properly decoded length. Fixes: bf8b9a9cb77b ("Bluetooth: bnep: Add support to extended headers of control frames") Signed-off-by: Dudu Lu Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 7c15c7c2878957cbfed93bcc29c13fdace464254 Author: SeungJu Cheon Date: Mon May 25 20:04:43 2026 +0900 Bluetooth: RFCOMM: validate skb length in MCC handlers [ Upstream commit 23882b828c3c8c51d0c946446a396b10abb3b16b ] The RFCOMM MCC handlers cast skb->data to protocol-specific structs without validating skb->len first. A malicious remote device can send truncated MCC frames and trigger out-of-bounds reads in these handlers. Fix this by using skb_pull_data() to validate and access the required data before dereferencing it. rfcomm_recv_rpn() requires special handling since ETSI TS 07.10 allows 1-byte RPN requests. Handle this by validating only the DLCI byte first, and validating the full struct only when len > 1. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Muhammad Bilal Signed-off-by: SeungJu Cheon Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 06fcbd79c3c360a50f9be9d370769bbd738d0976 Author: Zhang Cen Date: Thu May 28 17:45:06 2026 +0800 Bluetooth: MGMT: validate advertising TLV before type checks [ Upstream commit de23fb62259aa01d294f77238ae3b835eb674413 ] tlv_data_is_valid() reads each advertising data field length from data[i], then inspects data[i + 1] for managed EIR types before checking that the current field still fits inside the supplied buffer. A malformed field whose length byte is the last byte of the buffer can therefore make the parser read one byte past the advertising data. KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING request reached that path: BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid() Read of size 1 Call trace: tlv_data_is_valid() add_advertising() hci_mgmt_cmd() hci_sock_sendmsg() Move the existing element-length check before any type-octet inspection so each non-empty element is proven to contain its type byte before the parser looks at data[i + 1]. Fixes: 2bb36870e8cb ("Bluetooth: Unify advertising instance flags check") Reviewed-by: Paul Menzel Signed-off-by: Zhang Cen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit a07d741c077d4e34b16458241a94d29039386553 Author: Zhang Cen Date: Thu May 28 15:56:41 2026 +0800 Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind() [ Upstream commit 43c441edacf953b39517a44f5e5e10a93618b226 ] rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock, but returns the selected listener after dropping that lock without taking a reference. rfcomm_connect_ind() then locks the listener, queues a child socket on it, and may notify it after unlocking it. The buggy scenario involves two paths, with each column showing the order within that path: rfcomm_connect_ind(): listener close: 1. Find parent in 1. close() enters rfcomm_get_sock_by_channel() rfcomm_sock_release(). 2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown() without pinning parent. closes the listener. 3. Call lock_sock(parent) and 3. rfcomm_sock_kill() bt_accept_enqueue(parent, unlinks and puts parent. sk, true). 4. Read parent flags and may 4. parent can be freed. call sk_state_change(). If close wins the race, parent can be freed before rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the deferred-setup callback. Take a reference on the listener before leaving rfcomm_sk_list.lock. After lock_sock() succeeds, recheck that it is still in BT_LISTEN before queueing a child, cache the deferred-setup bit while the parent is locked, and drop the reference after the last parent use. KASAN reported a slab-use-after-free in lock_sock_nested() from rfcomm_connect_ind(), with the freeing stack going through rfcomm_sock_kill() and rfcomm_sock_release(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhang Cen Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit cd3e75dc141a6560a0186d6c52187ff5be9f3a38 Author: David Thompson Date: Fri May 29 21:03:00 2026 +0000 net: lan743x: permit VLAN-tagged packets up to configured MTU [ Upstream commit 8173d22b211f615015f7b35f48ab11a6dd78dc99 ] VLAN-tagged interfaces on lan743x devices were previously unreachable via SSH and failed to respond to large ping packets (e.g. "ping -s 1469" given MTU=1500). In these scenarios, "ethtool -S" reports non-zero "RX Oversize Frame Errors". According to Microchip AN2948, the MAC_RX FSE (VLAN field size enforcement) bit determines whether frames with VLAN tags exceeding the base MTU plus tag length are discarded. The driver must set the MAC_RX.FSE bit before setting MAC_RX.RXEN to allow VLAN-tagged frames up to the interface MTU, preventing them from being treated as oversized. As a result, both the base and VLAN-tagged interfaces can use the same MTU without receive errors. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: David Thompson Reviewed-by: Thangaraj Samynathan Reviewed-by: Nicolai Buchwitz Tested-by: Nicolai Buchwitz # lan7430 on arm64 (RevPi Link: https://patch.msgid.link/20260529210300.433135-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 973cf7c433d27f4d9556d0b7c332543be7ed7a6e Author: Yizhou Zhao Date: Wed May 27 16:31:58 2026 +0800 net: garp: fix unsigned integer underflow in garp_pdu_parse_attr [ Upstream commit 16e408e607a94b646fb14a2a98422c6877ae4b3c ] The receive-side GARP attribute parser computes dlen with reversed operands: dlen = sizeof(*ga) - ga->len; ga->len is the on-wire attribute length and includes the GARP attribute header. For normal attributes with data, ga->len is larger than sizeof(*ga), so the subtraction underflows in unsigned arithmetic. The resulting value is later passed to garp_attr_lookup(), whose length argument is u8. After truncation, the parsed data length usually no longer matches the length stored for locally registered attributes, so received Join/Leave events are ignored. This breaks the GARP receive path for common attributes, such as GVRP VLAN registration attributes. Compute the data length as the attribute length minus the header length. Fixes: eca9ebac651f ("net: Add GARP applicant-only participant") Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Signed-off-by: Yizhou Zhao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260527083200.42861-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8f5ccba09a3fecc3d0fc80f235fb4e427aa009f8 Author: Oscar Maes Date: Thu May 28 16:03:20 2026 +0200 pcnet32: stop holding device spin lock during napi_complete_done [ Upstream commit 73bf3cca7de6a73f53b6a52dc3b1c82ae5667a4d ] napi_complete_done may call gro_flush_normal (though not currently, as GRO is unsupported at the moment), which may result in packet TX. This will eventually result in calling pcnet32_start_xmit - resulting in a deadlock while trying to re-acquire the already locked spin lock. It is safe to split the spinlock block into two, because the hardware registers are still protected from concurrent access, and the two blocks perform unrelated operations that don't need to happen atomically. Fixes: 5b2ec6f2be51 ("pcnet32: use napi_complete_done()") Reviewed-by: Andrew Lunn Signed-off-by: Oscar Maes Reviewed-by: Alexander Lobakin Link: https://patch.msgid.link/20260528140320.5556-1-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6b08dc78d5c04cb5f5ebb9ab7348f450adfbdc05 Author: Yicong Hui Date: Mon Apr 6 19:00:13 2026 +0100 drm/imx: Fix three kernel-doc warnings in dcss-scaler.c [ Upstream commit ae0383e5a9a4b12d68c76c4769857def4665deff ] Fix the following W=1 kerneldoc warnings by adding the missing parameter descriptions for @phase0_identity and @nn_interpolation in dcss_scaler_filter_design() and @phase0_identity in dcss_scaler_gaussian_filter() Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:173 function parameter 'phase0_identity' not described in 'dcss_scaler_gaussian_filter' Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'phase0_identity' not described in 'dcss_scaler_filter_design' Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'nn_interpolation' not described in 'dcss_scaler_filter_design' Fixes: 9021c317b770 ("drm/imx: Add initial support for DCSS on iMX8MQ") Signed-off-by: Yicong Hui Reviewed-by: Laurentiu Palcu Link: https://patch.msgid.link/20260406180013.2442096-1-yiconghui@gmail.com Signed-off-by: Liu Ying Signed-off-by: Sasha Levin commit da8cbb64b47e9066b40af0de170901caf17b768c Author: Yizhou Zhao Date: Wed May 27 16:18:01 2026 +0800 6lowpan: fix off-by-one in multicast context address compression [ Upstream commit 2a58899d11009bffc7b4b32a571858f381121837 ] The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. Fixes: 5609c185f24d ("6lowpan: iphc: add support for stateful compression") Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Ao Wang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Signed-off-by: Yizhou Zhao Acked-by: Alexander Aring Link: https://patch.msgid.link/20260527081806.42747-1-zhaoyz24@mails.tsinghua.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 18af5d2ef0c4f65787fd1280c8b23286b9f2a835 Author: Jamal Hadi Salim Date: Sun May 31 12:08:12 2026 -0400 net/sched: act_api: use RCU with deferred freeing for action lifecycle [ Upstream commit 5057e1aca011e51ef51498c940ef96f3d3e8a305 ] When NEWTFILTER and DELFILTER are run concurrently it is possible to create a race with an associated action. Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER: 0: mutex_lock() <-- holds the idr lock 0: rcu_read_lock() 0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR) 0: mutex_unlock() <-- releases the idr lock 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) <-- Action removed from IDR 1: mutex_unlock() <-- mutex released allowing us to delete the action 1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory This patch fixes the race condition between NEWTFILTER and DELFILTER by adding struct rcu_head to tc_action used in the deferral and introducing a call_rcu() in the delete path to defer the final kfree(). Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") but also modernization/simplification to directly use kfree_rcu(). Let's illustrate the new restored code path: 0: rcu_read_lock() 1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held 1: idr_remove(idr, index) 1: mutex_unlock() 1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period 0: p = idr_find(idr, index) 0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0 1: rcu_read_unlock() <-- release so freeing can run after grace period After CPU1 calls idr_remove(), the object is no longer reachable through the IDR. CPU0's subsequent idr_find() will return NULL, and even if it still held a stale pointer, the immediate kfree() is now deferred until after the RCU grace period, so no UAF can occur. Fixes: d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") Suggested-by: Jakub Kicinski Reported-by: Kyle Zeng Tested-by: Victor Nogueira Tested-by: syzbot@syzkaller.appspotmail.com Signed-off-by: Jamal Hadi Salim Tested-by: Kyle Zeng Reviewed-by: Pedro Tammela Reviewed-by: Eric Dumazet Reviewed-by: Victor Nogueira Link: https://patch.msgid.link/20260531160812.68020-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 13da856c86fb8c2ccab95034fd77da1bb2c2a17c Author: Guangshuo Li Date: Fri May 29 23:57:45 2026 +0800 dm cache policy smq: check allocation under invalidate lock [ Upstream commit d3f0a606b9f278ece8a0df626ded9c4044071235 ] commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") added mq->lock around the destructive part of smq_invalidate_mapping(), but left the e->allocated check outside the critical section. That leaves a check-then-act race. Two concurrent invalidators can both observe e->allocated as true before either of them takes mq->lock. The first invalidator that acquires the lock removes the entry from the queues and hash table and then calls free_entry(), which clears e->allocated and puts the entry back on the free list. The second invalidator can then acquire mq->lock and continue with the stale result of the unlocked check. This can corrupt the SMQ queues or hash table by deleting an entry that is no longer on those structures. It can also hit the allocation check in free_entry() when the same entry is freed again. Move the allocation check under mq->lock so the predicate and the destructive operations are serialized by the same lock. Fixes: 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") Signed-off-by: Guangshuo Li Signed-off-by: Mikulas Patocka Signed-off-by: Sasha Levin commit 76280b78cc9f23bdc6438e10ad6dff148ef8375b Author: Yiming Qian Date: Sat May 23 12:29:10 2026 +0000 netfilter: bridge: make ebt_snat ARP rewrite writable [ Upstream commit 67ba971ae02514d85818fe0c32549ab4bfa3bf49 ] The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). Fixes: 63137bc5882a ("netfilter: ebtables: Fixes dropping of small packets in bridge nat") Reported-by: Yiming Qian Signed-off-by: Yiming Qian Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 8a1d6e40dedfe1068aee094d851bd69e289c9fd6 Author: Florian Westphal Date: Wed May 27 12:20:19 2026 +0200 netfilter: conntrack_irc: fix possible out-of-bounds read [ Upstream commit 66eba0ffce3b7e11449946b4cbbef8ea36112f56 ] When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026. Fixes: 869f37d8e48f ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port") Closes: https://sashiko.dev/#/patchset/20260525182924.28456-1-fw%40strlen.de Signed-off-by: Florian Westphal Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 56ffbe3a08c01dcdb0d6adee9ce1e535bfb3b389 Author: Fernando Fernandez Mancera Date: Tue May 26 23:58:31 2026 +0200 netfilter: synproxy: add mutex to guard hook reference counting [ Upstream commit 2fcba19caaeb2a33017459d3430f057967bb91b6 ] As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY. Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit e4feec3174036ba772006be74beee0efa09a9eb8 Author: Julian Anastasov Date: Mon May 25 07:07:44 2026 +0300 ipvs: clear the svc scheduler ptr early on edit [ Upstream commit 193989cc6d80dd8e0460fb3992e69fa03bf0ff9b ] ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code. Link: https://sashiko.dev/#/patchset/20260519015506.634185-1-rosenp%40gmail.com Fixes: 05f00505a89a ("ipvs: fix crash if scheduler is changed") Signed-off-by: Julian Anastasov Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 797c264bff8d83be1e510b90b6aa9ec8f49d1388 Author: Fernando Fernandez Mancera Date: Fri May 22 12:47:17 2026 +0200 netfilter: xt_NFQUEUE: prefer raw_smp_processor_id [ Upstream commit c6c5327dd18bec1e1bbf139b2cf5ae53608a9d30 ] With PREEMPT_RCU this triggers a splat because smp_processor_id() can be preempted while inside a RCU critical section. If xt_NFQUEUE target is invoked via nft_compat_eval() path, we are inside a RCU critical section. Just use the raw version instead. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 724d0caffd4204b46f78efe22f18f8338031c6e1 Author: Amirreza Zarrabi Date: Mon Feb 16 14:24:06 2026 -0800 tee: optee: prevent use-after-free when the client exits before the supplicant [ Upstream commit 387a926ee166814611acecb960207fe2f3c4fd3e ] Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the client wait as killable so it can be interrupted during shutdown or after a supplicant crash. This changes the original lifetime expectations: the client task can now terminate while the supplicant is still processing its request. If the client exits first it removes the request from its queue and kfree()s it, while the request ID remains in supp->idr. A subsequent lookup on the supplicant path then dereferences freed memory, leading to a use-after-free. Serialise access to the request with supp->mutex: * Hold supp->mutex in optee_supp_recv() and optee_supp_send() while looking up and touching the request. * Let optee_supp_thrd_req() notice that the client has terminated and signal optee_supp_send() accordingly. With these changes the request cannot be freed while the supplicant still has a reference, eliminating the race. Fixes: 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") Signed-off-by: Amirreza Zarrabi Tested-by: Ox Yeh Reviewed-by: Sumit Garg Signed-off-by: Jens Wiklander Signed-off-by: Sasha Levin commit 1354271c89d0e5fbf8b3d94097ff0216695209c7 Author: Ido Schimmel Date: Wed Jun 3 13:18:11 2026 +0300 ipv6: mcast: Fix use-after-free when processing MLD queries commit 791c91dc7a9dfb2457d5e29b8216a6484b9c4b40 upstream. When processing an MLD query, a pointer to the multicast group address is retrieved when initially parsing the packet. This pointer is later dereferenced without being reloaded despite the fact that the skb header might have been reallocated following the pskb_may_pull() calls, leading to a use-after-free [1]. Fix by copying the multicast group address when the packet is initially parsed. [1] BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512) Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118 Workqueue: mld mld_query_work Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_address_description.constprop.0 (mm/kasan/report.c:378) print_report (mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) __mld_query_work (net/ipv6/mcast.c:1512) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) [...] Freed by task 118: kasan_save_stack (mm/kasan/common.c:57) kasan_save_track (mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566) pskb_expand_head (net/core/skbuff.c:2335) __pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4)) __mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1)) mld_query_work (net/ipv6/mcast.c:1563) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Fixes: 97300b5fdfe2 ("[MCAST] IPv6: Check packet size when process Multicast") Reported-by: Leo Lin Reviewed-by: David Ahern Signed-off-by: Ido Schimmel Reviewed-by: Eric Dumazet Reviewed-by: Jiayuan Chen Link: https://patch.msgid.link/20260603101811.612594-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 0b88ecfbc9dc33b4db8836c37b50cf174e6c0691 Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon Apr 27 10:57:45 2026 +0800 i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl commit 617eb7c0961a8dfcfc811844a6396e406b2923ea upstream. While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong timeout value` warning was observed, accompanied by SMBus controller state machine corruption. The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of 10 ms. The user argument is checked against INT_MAX, but it is subsequently multiplied by 10 before being passed to msecs_to_jiffies(). A malicious user can pass a large value (e.g., 429496729) that passes the `arg > INT_MAX` check but overflows when multiplied by 10. This results in a truncated 32-bit unsigned value that bypasses the internal `(int)m < 0` check in `msecs_to_jiffies()`. The truncated value is then assigned to `client->adapter->timeout` (a signed 32-bit int), which is reinterpreted as a negative number. When passed to wait_for_completion_timeout(), this negative value undergoes sign extension to a 64-bit unsigned long, triggering the `schedule_timeout` warning and causing premature returns. This leaves the SMBus state machine in an unrecoverable state, constituting a local Denial of Service (DoS). Fix this by bounding the user argument to `INT_MAX / 10`. Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> [wsa: move the comment as well] Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 44860077bef7942b83cad7807806a28126115fa3 Author: Nathan Chancellor Date: Sat May 16 04:34:14 2026 +0900 Disable -Wattribute-alias for clang-23 and newer commit 175db11786bde9061db526bf1ac5107d915f5163 upstream. Clang recently added support for -Wattribute-alias [1], which results in the same warnings that necessitated commit bee20031772a ("disable -Wattribute-alias warning for SYSCALL_DEFINEx()") for GCC. kernel/time/itimer.c:325:1: error: alias and aliasee have different types 'long (unsigned int)' and 'long (typeof (__builtin_choose_expr((__builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0LL)) || __builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0ULL))), 0LL, 0L)))' (aka 'long (long)') [-Werror,-Wattribute-alias] 325 | SYSCALL_DEFINE1(alarm, unsigned int, seconds) | ^ include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1' 225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__) | ^ include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx' 236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) | ^ include/linux/syscalls.h:251:18: note: expanded from macro '__SYSCALL_DEFINEx' 251 | __attribute__((alias(__stringify(__se_sys##name)))); \ | ^ kernel/time/itimer.c:325:1: note: aliasee is declared here include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1' 225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__) | ^ include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx' 236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) | ^ include/linux/syscalls.h:255:18: note: expanded from macro '__SYSCALL_DEFINEx' 255 | asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ | ^ :16:1: note: expanded from here 16 | __se_sys_alarm | ^ Disable the warnings in the same way for clang-23 and newer. Disable the warning about unknown warning options to avoid breaking the build for versions of clang-23 that do not have -Wattribute-alias, such as ones deployed by vendors like Android or CI systems or when bisecting LLVM between llvmorg-23-init and release/23.x. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2163 Link: https://github.com/llvm/llvm-project/commit/40da6920a0d71d49dfa2392b09153600b0759f5e [1] Link: https://patch.msgid.link/20260515-syscall-disable-attribute-alias-for-clang-v1-1-9a9d95d41df6@kernel.org [nathan: Drop arch/riscv hunk in older trees and address conflicts] Signed-off-by: Nathan Chancellor Signed-off-by: Sasha Levin commit 80e416880b981fb826b6d71175a7eebbf7b82799 Author: Nathan Chancellor Date: Sat Mar 5 04:16:42 2022 +0530 compiler-clang.h: Add __diag infrastructure for clang commit f014a00bbeb09cea16017b82448d32a468a6b96f upstream. Add __diag macros similar to those in compiler-gcc.h, so that warnings that need to be adjusted for specific cases but not globally can be ignored when building with clang. Signed-off-by: Nathan Chancellor Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20220304224645.3677453-6-memxor@gmail.com [ Kartikeya: wrote commit message ] Signed-off-by: Nathan Chancellor Signed-off-by: Sasha Levin commit bd2ddb3fe9052ad8703593bbec26ecc7ca92869e Author: Johan Hovold Date: Thu Jun 4 14:11:33 2026 +0200 USB: serial: mct_u232: fix memory corruption with small endpoint commit 915b36d701950503c4ea0f6e314b10868e59fce3 upstream. The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin commit fec41484e7c2aa7ded44c541bba98872be937754 Author: Kuniyuki Iwashima Date: Sun Apr 26 01:26:43 2026 +0000 bpf: Free reuseport cBPF prog after RCU grace period. [ Upstream commit 18fc650ccd7fe3376eca89203668cfb8268f60df ] Eulgyu Kim reported the splat below with a repro. [0] The repro sets up a UDP reuseport group with a cBPF prog and replaces it with a new one while another thread is sending a UDP packet to the group. The reuseport prog is freed by sk_reuseport_prog_free(). bpf_prog_put() is called for "e"BPF prog to destruct through multiple stages while cBPF prog is freed immediately by bpf_release_orig_filter() and bpf_prog_free(). If a reuseport prog is detached from the setsockopt() path (reuseport_attach_prog() or reuseport_detach_prog()), sk_reuseport_prog_free() is called without waiting for RCU readers to complete, resulting in various bugs. Let's defer freeing the reuseport cBPF prog after one RCU grace period. Note "e"BPF prog is safe as is unless the fast path starts to touch fields destroyed in bpf_prog_put_deferred() and __bpf_prog_put_noref(). [0]: BUG: KASAN: vmalloc-out-of-bounds in reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 Read of size 4 at addr ffffc9000051e004 by task slowme/10208 CPU: 6 UID: 1000 PID: 10208 Comm: slowme Not tainted 7.0.0-geb7ac95ff75e #32 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 reuseport_select_sock+0xedc/0x1220 net/core/sock_reuseport.c:596 udp4_lib_lookup2+0x3bc/0x950 net/ipv4/udp.c:495 __udp4_lib_lookup+0x768/0xe20 net/ipv4/udp.c:723 __udp4_lib_lookup_skb+0x297/0x390 net/ipv4/udp.c:752 __udp4_lib_rcv+0x1312/0x2620 net/ipv4/udp.c:2752 ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207 ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 NF_HOOK+0x30c/0x3a0 include/linux/netfilter.h:318 __netif_receive_skb_one_core net/core/dev.c:6181 [inline] __netif_receive_skb net/core/dev.c:6294 [inline] process_backlog+0xaa4/0x1960 net/core/dev.c:6645 __napi_poll+0xae/0x340 net/core/dev.c:7709 napi_poll net/core/dev.c:7772 [inline] net_rx_action+0x5d7/0xf50 net/core/dev.c:7929 handle_softirqs+0x22b/0x870 kernel/softirq.c:622 do_softirq+0x76/0xd0 kernel/softirq.c:523 __local_bh_enable_ip+0xf8/0x130 kernel/softirq.c:450 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline] __dev_queue_xmit+0x1dd7/0x3710 net/core/dev.c:4890 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xca9/0x1070 net/ipv4/ip_output.c:237 NF_HOOK_COND include/linux/netfilter.h:307 [inline] ip_output+0x29f/0x450 net/ipv4/ip_output.c:438 ip_send_skb+0x45/0xc0 net/ipv4/ip_output.c:1508 udp_send_skb+0xb04/0x1510 net/ipv4/udp.c:1195 udp_sendmsg+0x1a71/0x2350 net/ipv4/udp.c:1485 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] __sys_sendto+0x554/0x680 net/socket.c:2206 __do_sys_sendto net/socket.c:2213 [inline] __se_sys_sendto net/socket.c:2209 [inline] __x64_sys_sendto+0xde/0x100 net/socket.c:2209 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x160/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x415a2d Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6bc31e41e8 EFLAGS: 00000212 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f6bc31e4cdc RCX: 0000000000415a2d RDX: 0000000000000001 RSI: 00007f6bc31e421f RDI: 0000000000000003 RBP: 00007f6bc31e4240 R08: 00007f6bc31e4220 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000212 R12: 00007f6bc31e46c0 R13: ffffffffffffffb8 R14: 0000000000000000 R15: 00007ffc9b0d70b0 Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Reported-by: Eulgyu Kim Reported-by: Taeyang Lee <0wn@theori.io> Signed-off-by: Kuniyuki Iwashima Signed-off-by: Daniel Borkmann Acked-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20260426012647.3233119-1-kuniyu@google.com Signed-off-by: Sasha Levin commit 05186946bc041f9daa04c1a5440f578f1a4f9490 Author: Michal Pecio Date: Mon May 18 07:31:21 2026 +0200 usb: core: Fix SuperSpeed root hub wMaxPacketSize commit d1e280334b7f0a1df441e08bd1f6a1bcc36b3bbb upstream. There is no good reason to have wBytesPerInterval < wMaxPacketSize - either one is too low or the other too high, and we may want to warn about such descriptors. Start with cleaning up our own root hubs. USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize from its former value of 4, which was derived from USB 2.0 spec and the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2 10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports. Suggested-by: Mathias Nyman Signed-off-by: Michal Pecio Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com Signed-off-by: Greg Kroah-Hartman commit bff9266bad6801b6302d36953f3f4f658d411545 Author: Maciej W. Rozycki Date: Fri Jun 5 04:09:15 2026 +0100 serial: dz: Fix bootconsole handover lockup commit 7f127b2208e5e2b817243cad41fe4211a6d5a7a3 upstream. Calling dz_reset() in the course of setting up the serial device causes line parameters to be reset and the transmitter disabled. We've been lucky in that no message is usually produced to the kernel log between this call and the later call to uart_set_options() in the course of console setup done by dz_serial_console_init(), or the system would hang as the console output handler in the firmware tried to access a port the transmitter of which has been disabled and line parameters messed up. This will change with the next change to the driver, so fix dz_reset() such that line parameters are set for 9600n8 console operation as with the system firmware and the transmitter re-enabled after reset. This also means dz_pm() serves no purpose anymore, so drop it. Fixes: e6ee512f5a77 ("dz.c: Resource management") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.25+ Link: https://patch.msgid.link/alpine.DEB.2.21.2605062302010.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman [ Avoid C99+ 'for' loop initial declaration for 5.15.y. ] Signed-off-by: Maciej W. Rozycki Signed-off-by: Sasha Levin commit aceb0f617003dda7a213a9abfbaf2f28adde24b2 Author: Wei-Cheng Chen Date: Thu Jun 4 20:19:16 2026 +0800 xhci: tegra: Fix ghost USB device on dual-role port unplug [ Upstream commit 5a4c828b8b29b47534814ade26d9aee09d5101fc ] When a USB device is unplugged from the dual-role port, the device-mode path in tegra_xhci_id_work() explicitly clears both SS and HS port power via direct hub_control ClearPortFeature(POWER) calls. This preempts the xHCI controller's normal disconnect processing -- PORT_CSC is never generated, the USB core never sees the disconnect, and the device remains in its internal tree as a ghost visible in lsusb. Add an otg_set_port_power flag to control whether the dual-role switch path performs explicit port power management. SoCs that need it (Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and beyond) rely on the PHY mode change to handle disconnect naturally and skip all port power calls. Within the port power path, otg_reset_sspi additionally gates the SSPI reset sequence on host-mode entry for SoCs that require it. Flags set per SoC: Tegra124, Tegra186 -> otg_set_port_power Tegra210 -> otg_set_port_power, otg_reset_sspi Tegra194 and later -> (none) [ Backport to 5.15.y: keep the host-mode snapshot in the existing tegra->lock section, retain pm_runtime_mark_last_busy() in the host port-power path, and omit the newer Tegra234 entry. ] Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wei-Cheng Chen Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 25b93d0f229a115ab120106f37b9454170d4cfd4 Author: Johan Hovold Date: Thu Jun 4 14:07:58 2026 +0200 USB: serial: digi_acceleport: fix memory corruption with small endpoints commit cb3560e8eab1dfa1cac1ed52631adf8ec6ff2cd5 upstream. Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin commit 8c15ac42db0c0afe723602ef483cf7109a4af0ac Author: Nathan Chancellor Date: Thu Jun 4 10:26:52 2026 +0100 HID: core: Fix size_t specifier in hid_report_raw_event() [ Upstream commit 4d3a2a466b8d68d852a1f3bbf11204b718428dc4 ] When building for 32-bit platforms, for which 'size_t' is 'unsigned int', there are warnings around using the incorrect format specifier to print bsize in hid_report_raw_event(): drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n", | ~~~ | %zu 2054 | report->id, csize, bsize); | ^~~~~ drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n", | ~~~ | %zu 2076 | report->id, rsize, bsize); | ^~~~~ Use the proper 'size_t' format specifier, '%zu', to clear up the warnings. Cc: stable@vger.kernel.org Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event") Reported-by: Miguel Ojeda Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/ Signed-off-by: Nathan Chancellor Signed-off-by: Linus Torvalds Signed-off-by: Lee Jones Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit a4d6cb7cf45bddc76c78ed5fd683328af9e2018f Author: Benjamin Tissoires Date: Thu Jun 4 10:26:51 2026 +0100 HID: pass the buffer size to hid_report_raw_event [ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ] commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") enforced the provided data to be at least the size of the declared buffer in the report descriptor to prevent a buffer overflow. However, we can try to be smarter by providing both the buffer size and the data size, meaning that hid_report_raw_event() can make better decision whether we should plaining reject the buffer (buffer overflow attempt) or if we can safely memset it to 0 and pass it to the rest of the stack. Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Acked-by: Johan Hovold Reviewed-by: Greg Kroah-Hartman Signed-off-by: Jiri Kosina Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()") [Lee: Backported to linux-6.12.y and beyond] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 6f59d1468a9abdda50a6c8d058c38d63c9240653 Author: Vicki Pfau Date: Thu Jun 4 10:26:50 2026 +0100 HID: core: Add printk_ratelimited variants to hid_warn() etc [ Upstream commit 1d64624243af8329b4b219d8c39e28ea448f9929 ] hid_warn_ratelimited() is needed. Add the others as part of the block. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina Signed-off-by: Lee Jones Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit ad3d1628a46134276546d7a12fedf04be9979158 Author: Johan Hovold Date: Thu Jun 4 10:36:36 2026 +0200 USB: serial: cypress_m8: fix memory corruption with small endpoint commit e1a9d791fd66ab2431b9e6f6f835823809869047 upstream. Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold [ johan: adjust context for 6.18 ] Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin commit 8c58c9152cf9bc643bcad509070c25414816e406 Author: Maciej W. Rozycki Date: Wed May 6 23:42:43 2026 +0100 serial: zs: Switch to using channel reset commit 8572955630f30948837088aa98bcbe0532d1ceac upstream. Switch the driver to using the channel reset rather than hardware reset, simplifying handling by removing an interference between channels that causes the other channel to become uninitialised afterwards. There is little difference between the two kinds of reset in terms of register settings that result, and we initialise the whole register set right away anyway. However this prevents a hang from happening should the console output handler in the firmware try to access the other port whose transmitter has been disabled and line parameters messed up. For example this will happen if the keyboard port (port A) is chosen for the system console, unusually but not insanely for a headless system, as the port is wired to a standard DA-15 connector and an adapter can be easily made. Or with the next change in place this would happen for the regular console port (port B), since the keyboard port (port A) will be initialised first. Just remove the unnecessary complication then, a channel reset is good enough. We still need the initialisation marker, now per channel rather than per SCC, as for the console port zs_reset() will be called twice: once early on via zs_serial_console_init() for the console setup only, and then again via zs_config_port() as the port is associated with a TTY device. Fixes: 8b4a40809e53 ("zs: move to the serial subsystem") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.23+ Link: https://patch.msgid.link/alpine.DEB.2.21.2605062323430.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit 8d21fccdc2da89fcbdeceb657201dae2465b4426 Author: Maciej W. Rozycki Date: Wed May 6 23:42:39 2026 +0100 serial: zs: Fix bootconsole handover lockup commit 6c05cf72e13314ce9b770b5951695dc5a2152920 upstream. Calling zs_reset() in the course of setting up the serial device causes line parameters to be reset and the transmitter disabled. We've been lucky in that no message is usually produced to the kernel log between this call and the later call to uart_set_options() in the course of console setup done by zs_serial_console_init(), or the system would hang as the console output handler in the firmware tried to access a port the transmitter of which has been disabled and line parameters messed up. This will change with the next change to the driver, so fix zs_reset() such that line parameters are set for 9600n8 console operation as with the system firmware and the transmitter re-enabled after reset. This also means zs_pm() serves no purpose anymore, so drop it. Fixes: 8b4a40809e53 ("zs: move to the serial subsystem") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.23+ Link: https://patch.msgid.link/alpine.DEB.2.21.2605062308040.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit 693664fde1c92ba1f2b7f54e90e36c071627a6c3 Author: Maciej W. Rozycki Date: Wed May 6 23:42:31 2026 +0100 serial: dz: Fix bootconsole message clobbering at chip reset commit ca904f4b42355287bc5ce8b7550ebe909cda4c2c upstream. In the DZ interface as implemented by the DC7085 gate array the serial transmitters are double buffered, meaning that at the time a transmitter is ready to accept the next character there is one in the transmit shift register still being sent to the line. Issuing a master clear at this time causes this character to be lost, so wait an extra amount of time sufficient for the transmit shift register to drain at 9600bps, which is the baud rate setting used by the firmware console. Mind the specified 1.4us TRDY recovery time in the course and continue using iob() as the completion barrier, since the platforms involved use a write buffer that can delay and combine writes, and reorder them with respect to reads regardless of the MMIO locations accessed and we still lack a platform-independent handler for that. When called from dz_serial_console_init() this is too early for fsleep() to work and even before lpj has been calculated and therefore the delay is actually not sufficient for the transmitter to drain and is merely a placeholder now. This will be addressed in a follow-up change. Fixes: e6ee512f5a77 ("dz.c: Resource management") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.25+ Link: https://patch.msgid.link/alpine.DEB.2.21.2605062259080.46195@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit e1f8d21db0e7428356747fb555a98bec5648a619 Author: Shitalkumar Gandhi Date: Mon Apr 20 19:29:03 2026 +0530 serial: fsl_lpuart: fix rx buffer and DMA map leaks in start_rx_dma commit 9a9254c4a2a3ca2b3da16d173f3b0dd01f397ff6 upstream. lpuart_start_rx_dma() allocates sport->rx_ring.buf with kzalloc() and then maps a scatterlist via dma_map_sg(). On three subsequent error paths the function returns directly without releasing those resources: - when dma_map_sg() returns 0 (-EINVAL): ring->buf is leaked. - when dmaengine_slave_config() fails: ring->buf and the DMA mapping are leaked. - when dmaengine_prep_dma_cyclic() returns NULL: ring->buf and the DMA mapping are leaked. The sole cleanup path, lpuart_dma_rx_free(), is only reached when lpuart_dma_rx_use is set, and the caller lpuart_rx_dma_startup() clears that flag on failure of lpuart_start_rx_dma(). So these resources are permanently leaked on every failure in this function. Repeated port open/close or termios changes under error conditions will slowly consume memory and leave stale streaming DMA mappings behind. Fix it by introducing two error labels that unmap the scatterlist and free the ring buffer as appropriate. While here, replace the misleading -EFAULT (bad userspace pointer) returned when dmaengine_prep_dma_cyclic() fails with the more accurate -ENOMEM, matching how other dmaengine users in the tree treat this failure. No functional change on the success path. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Cc: stable Signed-off-by: Shitalkumar Gandhi Reviewed-by: Frank Li Link: https://patch.msgid.link/20260420135903.2062024-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Greg Kroah-Hartman commit 9f09c32a88aa9209e35390a30c0633cdc2754a5b Author: Maciej W. Rozycki Date: Fri Apr 10 18:19:31 2026 +0100 serial: zs: Fix swapped RI/DSR modem line transition counting commit d15cd40cb1858f75846eaafa9a6bca841b790a92 upstream. Fix a thinko in the status interrupt handler that has caused counters for the RI and DSR modem line transitions to be used for the other line each. Fixes: 8b4a40809e53 ("zs: move to the serial subsystem") Cc: stable Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2604101747110.29980@angie.orcam.me.uk Signed-off-by: Greg Kroah-Hartman commit e2b5c2b7a1b81c5a42a22b334cf6e2a88d567bb9 Author: Hongling Zeng Date: Tue Apr 21 14:57:37 2026 +0800 serial: sh-sci: fix memory region release in error path commit 92b1ea22454b08a39baef3a7290fb3ec50366616 upstream. The sci_request_port() function uses request_mem_region() to reserve I/O memory, but in the error path when sci_remap_port() fails, it incorrectly calls release_resource() instead of release_mem_region(). This mismatch can cause resource accounting issues. Fix it by using the correct release function, consistent with sci_release_port(). Fixes: e2651647080930a1 ("serial: sh-sci: Handle port memory region reservations.") Cc: stable Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202604032356.SzEjYkBC-lkp@intel.com/ Signed-off-by: Hongling Zeng Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260421065737.724187-1-zenghongling@kylinos.cn Signed-off-by: Greg Kroah-Hartman commit 57d5d697642e05d5dd2d40660817765943dd709f Author: Berkant Koc Date: Sat May 23 15:27:47 2026 +0200 drm/hyperv: validate VMBus packet size in receive callback commit 7f87763f47a3c22fb50265a00619ef10f2394b18 upstream. hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback(). Fixes: 76c56a5affeb ("drm/hyperv: Add DRM driver for hyperv synthetic video device") Cc: stable@vger.kernel.org # 5.14+ Signed-off-by: Berkant Koc Assisted-by: Claude:claude-opus-4-7 berkoc-pipeline Reviewed-by: Michael Kelley Tested-by: Michael Kelley Signed-off-by: Hamza Mahfooz Link: https://patch.msgid.link/8200dbc199c7a9b75ac7e8af6c748d2189b5ebd5.1779542874.git.me@berkoc.com Signed-off-by: Greg Kroah-Hartman commit 07776b7779c9426982c1ad74aad91bd531593790 Author: Michael Bommarito Date: Wed May 20 09:30:15 2026 -0400 scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32 commit a9a39233ec1fc9f97ea1340a4d09bb7ec2be5153 upstream. An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in the generic FC transport. This is not a local userspace or IP network path; the attacker must be able to inject fabric traffic, for example as a compromised switch or fabric controller, or as a same-zone N_Port on a fabric that permits source spoofing. The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop counter against the 32-bit on-wire pname_count field, and did not bound pname_count by the descriptor body already validated by the TLV walker. A pname_count of 256 therefore wraps the counter and keeps the loop condition true indefinitely. Factor the shared pname_list[] walk into one helper, widen the counter to u32, and clamp pname_count against the entries that fit in the descriptor body before iterating. Fixes: 3dcfe0de5a97 ("scsi: fc: Parse FPIN packets and update statistics") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Christoph Hellwig Reviewed-by: John Garry Link: https://patch.msgid.link/20260520133015.1018937-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit fda976f7390bb5d1e9b84ef11ebb17323038e0c6 Author: Michael Bommarito Date: Mon May 18 10:43:07 2026 -0400 scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker commit 9eed1bd59937e6828b00d2f2dfef631d964f3636 upstream. drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop. Fixes: 97c8389d54b9 ("[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260518144307.2820961-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit e2d4d51cf5785815fa4e91e0c019e3eb2506a84c Author: Michael Bommarito Date: Sun May 10 19:16:57 2026 -0400 thunderbolt: property: Reject dir_len < 4 to prevent size_t underflow commit de21b59c29e31c5108ddc04210631bbfab81b997 upstream. On the non-root path, __tb_property_parse_dir() takes dir_len from entry->length (u16 widened to size_t). Two distinct OOB conditions follow when entry->length < 4: 1. The non-root path begins with kmemdup(&block[dir_offset], sizeof(*dir->uuid), ...) which always reads 4 dwords from dir_offset. tb_property_entry_valid() only enforces dir_offset + entry->length <= block_len, so a crafted entry with dir_offset close to the end of the property block and entry->length in 0..3 passes that gate but lets the UUID copy run off the block (e.g. dir_offset = 497, dir_len = 3 in a 500-dword block reads block[497..501]). 2. After the kmemdup, content_len = dir_len - 4 underflows size_t to ~SIZE_MAX, nentries becomes SIZE_MAX / 4, and the entry walk runs OOB on each iteration until an entry fails validation or the kernel oopses on an unmapped page. Reject dir_len < 4 on the non-root path *before* the UUID kmemdup, which closes both holes. Also move INIT_LIST_HEAD(&dir->properties) up to immediately after the dir allocation so the new error-return path (and the existing uuid-alloc failure path) calling tb_property_free_dir() sees a walkable list rather than the zero-initialized NULL next/prev that list_for_each_entry_safe() would oops on. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit e8a0b0a93a6ef958e70b1dd4930beb6dc0026b36 Author: Michael Bommarito Date: Sun May 10 19:16:56 2026 -0400 thunderbolt: property: Reject u32 wrap in tb_property_entry_valid() commit 01deda0152066c6c955f0619114ea6afa070aaec upstream. entry->value is u32 and entry->length is u16; the sum is performed in u32 and wraps. A malicious XDomain peer can pick value = 0xffffff00, length = 0x100 so the sum 0x100000000 wraps to 0 and passes the > block_len check. tb_property_parse() then passes entry->value to parse_dwdata() as a dword offset into the property block, reading attacker-directed memory far past the allocation. For TEXT-typed entries with the "deviceid" or "vendorid" keys this lands in xd->device_name / xd->vendor_name and is readable back via the per-XDomain device_name / vendor_name sysfs attributes; the leak is NUL-bounded (kstrdup() stops at the first zero byte) and untargeted (the attacker picks a delta, not an absolute address). DATA-typed entries are parsed into property->value.data but not generically surfaced to userspace. Use check_add_overflow() so a wrapped sum is rejected. Fixes: cdae7c07e3e3 ("thunderbolt: Add support for XDomain properties") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-6 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit 90ccf5fb63243fae1b4b3200f3310500500ecf2e Author: Michael Bommarito Date: Sun Apr 19 12:03:59 2026 -0400 usb: gadget: f_fs: copy only received bytes on short ep0 read commit 4e036c10e7f4df5d951c69cc3697bc8e209c6d02 upstream. ffs_ep0_read() allocates its control-OUT data buffer with kmalloc() (not kzalloc) at the Length value from the Setup packet, then copies that full len to userspace regardless of how many bytes were actually received: data = kmalloc(len, GFP_KERNEL); ... ret = __ffs_ep0_queue_wait(ffs, data, len); if ((ret > 0) && (copy_to_user(buf, data, len))) ret = -EFAULT; __ffs_ep0_queue_wait() returns req->actual, which on a short control OUT transfer is strictly less than len. The copy_to_user() call still copies len bytes, so on a short OUT the last (len - ret) bytes of the kmalloc() buffer -- uninitialised slab residue -- are delivered to the FunctionFS daemon. Short ep0 OUT completions are specified USB control-transfer behavior and are produced by in-tree UDCs: * dwc2 continues on req->actual < req->length for ep0 DATA OUT (short-not-ok is the only ep0-OUT stall path). * aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket. * renesas_usbf logs "ep0 short packet" and completes the request. * dwc3 stalls on short IN but not on short OUT. A short ep0 OUT is therefore not evidence of a broken UDC; it is a normal condition f_fs has to cope with. The sibling gadgetfs implementation in drivers/usb/gadget/legacy/inode.c already does this correctly via min(len, dev->req->actual) before copy_to_user(). This patch brings f_fs.c to the same safe pattern rather than trimming at a defensive layer. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace. Linux host stacks normally reject short-wLength control OUTs before they reach the gadget, so reproducing this required a build that bypasses that host-side check. With the bypass in place, a 1-byte payload on a 64-byte Setup produces 63 bytes of non-canary slab residue in the daemon's read buffer. Fix by copying only ret (actually received) bytes to userspace. Fixes: ddf8abd25994 ("USB: f_fs: the FunctionFS driver") Cc: stable Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419160359.1577270-1-michael.bommarito@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 742e3dd8a0beab4b08bde1964e4d05df5b202c94 Author: Seungjin Bae Date: Mon May 18 19:43:14 2026 -0400 usb: gadget: dummy_hcd: Reject hub port requests for non-existent ports commit 7d9633528dd40e33964d2dc74a5abbf5c4d116ce upstream. The `dummy_hub_control()` function handles USB hub class requests to the virtual root hub. The `GetPortStatus` case returns -EPIPE for requests with `wIndex != 1`, since the virtual root hub has only a single port. However, the `ClearPortFeature` and `SetPortFeature` cases lack the same check. Fix this by extending the `wIndex != 1` rejection to both cases, matching the existing behavior of `GetPortStatus`. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Suggested-by: Alan Stern Signed-off-by: Seungjin Bae Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260518234314.1889396-1-eeodqql09@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 550fa4d071a8c8e53072900869d37ae6abf4999d Author: Guangshuo Li Date: Mon Apr 27 23:36:51 2026 +0800 usb: gadget: net2280: Fix double free in probe error path commit c8547c74988e0b5f4cbb1b895e2a57aae084f070 upstream. usb_initialize_gadget() installs gadget_release() as the release callback for the embedded gadget device. The struct net2280 instance is therefore released through gadget_release() when the gadget device's last reference is dropped. The probe error path calls net2280_remove(), which tears down the partially initialized device and drops the gadget reference with usb_put_gadget(). Calling kfree(dev) afterwards can free the same object again. Drop the explicit kfree() and let the gadget device release callback handle the final free. This issue was found by a static analysis tool I am developing. Fixes: f770fbec4165 ("USB: UDC: net2280: Fix memory leaks") Cc: stable Signed-off-by: Guangshuo Li Reviewed-by: Alan Stern Link: https://patch.msgid.link/20260427153651.337846-1-lgs201920130244@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 8b93ee5baeef6efabee2c3381907733ad2dbc883 Author: Johan Hovold Date: Wed May 20 16:27:10 2026 +0200 USB: serial: mct_u232: fix missing interrupt-in transfer sanity check commit 245aba83e3c288e176ed037a1f6b618b09e92ed8 upstream. Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 2f3661eb2446e1ef593da45e01a3b21a906768ec Author: Johan Hovold Date: Fri May 22 16:19:50 2026 +0200 USB: serial: mxuport: fix memory corruption with small endpoint commit 4085f0dbb1ce2251c9a5938d693de6593f0ab2bd upstream. Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable@vger.kernel.org # 3.14 Cc: Andrew Lunn Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e124120e89b61a967e40dee6b5e1ecafc45c09d9 Author: Johan Hovold Date: Wed May 20 16:26:48 2026 +0200 USB: serial: keyspan: fix missing indat transfer sanity check commit ab8336a7e414f018430aa1af3a46944032f7ff96 upstream. Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Cc: stable@vger.kernel.org # 2.6.23 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit aaa66708bfb1dca2acd219d1c1582f9f6d5492cb Author: Zhang Cen Date: Fri May 22 22:54:42 2026 +0800 USB: serial: cypress_m8: validate interrupt packet headers commit 9f9bfc80c67f35a275820da7e83a35dface08281 upstream. cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 [ johan: use constants in header length sanity checks ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f361359a952da15e70e693c2d7dca5c5843eae3e Author: Zhang Cen Date: Tue May 19 19:11:50 2026 +0800 USB: serial: belkin_sa: validate interrupt status length commit 4ce058df2ee02cc2a0f0fd5cd64ce6f1482a0b65 upstream. The Belkin interrupt callback treats interrupt data as a four-byte status report and reads LSR/MSR fields at offsets 2 and 3. The interrupt-in buffer length is derived from endpoint wMaxPacketSize, and short interrupt transfers may complete successfully with a smaller actual_length. Check the completed interrupt packet length before parsing status fields so short interrupt endpoints and short successful packets are ignored instead of causing out-of-bounds or stale status-byte reads. KASAN report as below: BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback() Read of size 1 Call trace: belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202) __usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630) dummy_timer() (?:?) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit bd5b381dc5110ab11811566feac88785c76d38fa Author: Wanquan Zhong Date: Wed May 20 19:32:45 2026 +0800 USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL commit 689f2facc689c8add11d7ff69fbbad17d65ee596 upstream. The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") was missing the .driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop modules (e.g. RW135-GL and RW350-GL). Without this flag, the option driver incorrectly binds to the reserved ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM communication failures after mode switching. This matches the handling of other Rolling Wireless MBIM devices. - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, ADB, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") Signed-off-by: Wanquan Zhong Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit dcd3816fb24d011b33dd6008cc681d65d144e14f Author: Jan Volckaert Date: Sun May 17 17:32:37 2026 +0200 USB: serial: option: add MeiG SRM813Q commit 7d2b37d3e42d19071b62f4ddbee6e16e905efbf1 upstream. Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module. The module can be put in different modes via AT commands to enable/disable GPS functionality: MODEM - PPP mode(2dee:4d63): AT+SER=1,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: MODEM If#= 3: AT P: Vendor=2dee ProdID=4d63 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms NMEA mode(2dee:4d64): AT+SER=51,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: NMEA If#= 3: AT P: Vendor=2dee ProdID=4d64 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Jan Volckaert Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit ca9d2ee02a1a1cc4bb80a8c214ca57c00f9ad46a Author: Heitor Alves de Siqueira Date: Tue May 5 15:56:04 2026 -0300 usb: usbtmc: reject interrupt endpoints with small wMaxPacketSize commit 121d2f682ba912b1427cddca7cf84840f41cc620 upstream. The USB488 subclass specification requires interrupt wMaxPacketSize to be 0x02, unless the device sends vendor-specific notifications. Endpoints that advertise less than 2 bytes for wMaxPacketSize are unlikely to work with the current driver, as URBs will not have enough space for interrupt headers. Considering that any notification URBs will be ignored by the driver, reject these endpoints early during probe. Fixes: 041370cce889 ("USB: usbtmc: refactor endpoint retrieval") Cc: stable Suggested-by: Michal Pecio Signed-off-by: Heitor Alves de Siqueira Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-2-a36113f62db7@igalia.com Signed-off-by: Greg Kroah-Hartman commit e3eec3005de44e7f37d8d7724be636446516ab42 Author: Heitor Alves de Siqueira Date: Tue May 5 15:56:03 2026 -0300 usb: usbtmc: check URB actual_length for interrupt-IN notifications commit 52f2ad3f7e5eb3b5908e1d685d4342519dc9cfcd upstream. USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint. Fixes: dbf3e7f654c0 ("Implement an ioctl to support the USMTMC-USB488 READ_STATUS_BYTE operation.") Reported-by: syzbot+abbfd103085885cf16a2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=abbfd103085885cf16a2 Cc: stable Suggested-by: Michal Pecio Signed-off-by: Heitor Alves de Siqueira Link: https://patch.msgid.link/20260505-usbtmc-iin-size-v3-1-a36113f62db7@igalia.com Signed-off-by: Greg Kroah-Hartman commit dcc1c90b28b28b7c493547506297e78653f81952 Author: Michael Bommarito Date: Fri Apr 17 12:35:52 2026 -0400 usbip: vudc: Fix use after free bug in vudc_remove due to race condition commit d96209626a29ea64666be98c30b30ac82e5f1be6 upstream. This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report. Fixes: b6a0ca111867 ("usbip: vudc: Add UDC specific ops") Cc: stable Reported-by: Zheng Wang Closes: https://lore.kernel.org/linux-usb/20230317100954.2626573-1-zyytlz.wz@163.com/ Signed-off-by: Michael Bommarito Acked-by: Shuah Khan Link: https://patch.msgid.link/20260417163552.807548-1-michael.bommarito@gmail.com Signed-off-by: Greg Kroah-Hartman commit b1ba2cbc375bf1baebd7488a1a9a2a44248ccdc5 Author: Sam Burkels Date: Fri May 1 15:23:46 2026 +0200 usb: storage: Add quirks for PNY Elite Portable SSD commit b53ebb811e00be50a779ce4e7aee604178b4a825 upstream. The PNY Elite Portable SSD (USB ID 154b:f009) is a sibling of the already-quirked PNY Pro Elite SSDs (154b:f00b and 154b:f00d). Like its siblings, it uses a Phison-based USB-SATA bridge that exhibits firmware bugs when bound to the uas driver. Without quirks, the device fails to complete READ CAPACITY commands when accessed over UAS on a SuperSpeed (USB 3) port. The device enumerates and reports as a SCSI direct-access device, but reports zero logical blocks and never finishes spin-up: usb 2-3: new SuperSpeed USB device number 8 using xhci_hcd usb 2-3: New USB device found, idVendor=154b, idProduct=f009 usb 2-3: Product: PNY ELITE PSSD usb 2-3: Manufacturer: PNY scsi host0: uas scsi 0:0:0:0: Direct-Access PNY PNY ELITE PSSD 0 sd 0:0:0:0: [sda] Spinning up disk... [...10+ seconds of polling, no progress...] sd 0:0:0:0: [sda] Read Capacity(16) failed: hostbyte=DID_ERROR sd 0:0:0:0: [sda] Read Capacity(10) failed: hostbyte=DID_ERROR sd 0:0:0:0: [sda] 0 512-byte logical blocks: (0 B/0 B) Tested each individual quirk to find the minimum that fixes this: - US_FL_NO_ATA_1X alone: device hangs on spin-up - US_FL_NO_REPORT_OPCODES alone: works on USB 2.0, hangs on USB 3.0 - US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES: works on both With both quirks the device enumerates correctly while still using the uas driver, and delivers full UAS throughput (~281 MB/s sequential read on a USB 3.0 Gen 1 port). The existing PNY Pro Elite entries (f00b, f00d) only set NO_ATA_1X, but this device additionally chokes on REPORT OPCODES under SuperSpeed. Signed-off-by: Sam Burkels Acked-by: Oliver Neukum Cc: stable Link: https://patch.msgid.link/20260501132346.86572-1-sam@1a38.nl Signed-off-by: Greg Kroah-Hartman commit 82a682cac9f72284b29e1e0a739c92368b77923a Author: Stephen J. Fuhry Date: Wed May 13 13:14:19 2026 -0400 USB: quirks: add NO_LPM for Lenovo ThinkPad USB-C Dock Gen2 hub controllers commit 9ddb9c0deca48d2c2a22ebf4d2f35c925a520328 upstream. The Lenovo ThinkPad USB-C Dock Gen2 (17ef:a391, 17ef:a392) hub controllers exhibit link instability when USB Link Power Management is enabled, similar to the dock's Ethernet adapter (17ef:a387) which already carries USB_QUIRK_NO_LPM. When the dock reconnects after a transient disconnect, the hub controllers enter LPM states between re-enumeration retries, causing repeated disconnect/reconnect cycles lasting up to two minutes. Disabling LPM for these devices restores stable enumeration. Signed-off-by: Stephen J. Fuhry Cc: stable Link: https://patch.msgid.link/20260513171419.44849-1-fuhrysteve@gmail.com Signed-off-by: Greg Kroah-Hartman commit df4c0304f205302af968c0a184b4e7975b083c70 Author: Michal Pecio Date: Mon May 18 07:32:07 2026 +0200 usb: core: Fix up Interrupt IN endpoints with bogus wBytesPerInterval commit 727d045d064b7c9a24db3bce9c0485a382cb768b upstream. Tao Xue found that some common devices violate USB 3.x section 9.6.7 by reporting wBytesPerInterval lower than the size of packets they actually send. I confirmed that AX88179 may set it to 0 and RTL8153 CDC configuration sets it to 8 but sends both 8 and 16 byte packets: S Ii:11:007:3 -115:128 16 < C Ii:11:007:3 0:128 8 = a1000000 01000000 S Ii:11:007:3 -115:128 16 < C Ii:11:007:3 0:128 16 = a12a0000 01000800 00000000 00000000 Most xHCI host controllers neglect interrupt bandwidth reservations and let such devices exceed theirs, some fail the URB with EOVERFLOW. Assume that wBytesPerInterval lower than wMaxPacketSize is bogus and increase it to the worst case maximum on interrupt IN endpoints. This solves xHCI problems and appears to have no other effect. Interrupt transfers are not limited to one interval and drivers submit URBs of class defined size without looking at wBytesPerInterval. Any multi- interval transfer is considered terminated by a packet shorter than wMaxPacketSize regardless of wBytesPerInterval - see USB3 8.10.3. Stay in spec on OUT endpoints and isochronous. No buggy devices are known and we don't want to risk sending more data than the device is prepared to handle or confusing isoc drivers regarding altsetting capacities guaranteed by the device itself. And don't complain when wMaxPacketSize <= wBytesPerInterval < wMaxPacketSize * (bMaxBurst+1) because enabling this seems to be the exact goal of the spec. Reported-and-tested-by: Tao Xue Closes: https://lore.kernel.org/linux-usb/20260402021400.28853-1-xuetao09@huawei.com/ Cc: stable@vger.kernel.org Signed-off-by: Michal Pecio Link: https://patch.msgid.link/20260518073207.5b7d26e7.michal.pecio@gmail.com Signed-off-by: Greg Kroah-Hartman commit 1d07b37d61cd4ef4a54893e7a661f512341c5188 Author: Xu Yang Date: Mon Apr 27 15:57:55 2026 +0800 usb: chipidea: core: convert ci_role_switch to local variable commit 8f6aa392653e52a45858cff5c063df550028836b upstream. When a system contains multiple USB controllers, the global ci_role_switch variable may be overwritten by subsequent driver initialization code. This can cause issues in the following cases: - The 2nd ci_hdrc_probe() sees ci_role_switch.fwnode as non-NULL even though the "usb-role-switch" property is not present for the controller. - When the ci_hdrc device is unbound and bound again, ci_role_switch fwnode will not be reassigned, and the old value will be used instead. Convert ci_role_switch to a local variable to fix these issues. Fixes: 05559f10ed79 ("usb: chipidea: add role switch class support") Cc: stable Acked-by: Peter Chen Reviewed-by: Frank Li Signed-off-by: Xu Yang Link: https://patch.msgid.link/20260427075755.3611217-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman commit 5f2e2a240dc1846e049bc67e9c3cdf5b031d08bf Author: Zhaoyang Yu <2426767509@qq.com> Date: Thu Apr 9 13:41:58 2026 +0800 tty: serial: pch_uart: add check for dma_alloc_coherent() commit 6fe472c1bbbe238e91141f7cabc1226e96a60d43 upstream. Add a check for dma_alloc_coherent() failure to prevent a potential NULL pointer dereference in dma_handle_rx(). Properly release DMA channels and the PCI device reference using a goto ladder if the allocation fails. Fixes: 3c6a483275f4 ("Serial: EG20T: add PCH_UART driver") Cc: stable Signed-off-by: Zhaoyang Yu <2426767509@qq.com> Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/tencent_E328416B7CFD436F6029F2DF02AD7ED89C08@qq.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 1184d1f81d6253713397c47f46d010ef89c552ca Author: Ian Abbott Date: Wed Apr 22 15:46:37 2026 +0100 comedi: comedi_test: Fix limiting of convert_arg in waveform_ai_cmdtest() commit 8a3bee801d420be8a7a0bae4a26547b353b8fe22 upstream. The function checks and possibly modifies the description of an asynchronous command to be run on the analog input subdevice of a comedi device attached to the "comedi_test" driver, returning 0 if no modifications were required, or a positive value that indicates which step of the checking process it failed on. Step 4 fixes up various argument values for various trigger sources. There are two bugs in the fixing up of the `convert_arg` value to keep the `scan_begin_arg` value within the range of `unsigned int` when `scan_begin_src` and `convert_src` both have the value `TRIG_TIMER`, which indicates that the corresponding `_arg` values hold a time period in nanoseconds. The code also uses `scan_end_arg` which hold the number of "conversions" within each "scan". The goal is to end up with the scan period being less than or equal to the convert period multiplied by the number of conversions per scan. It intends to do that by clamping the `convert_arg` value to a maximum value of `UINT_MAX / scan_end_arg` rounded down to a multiple of 1000 (`NSEC_PER_USEC`). (The rounding from nanoseconds to microseconds is because the driver is modelling a device that uses a 1 MHz clock for timing. This is partly because that is a more typical timing base for real hardware devices driven by comedi, and partly because the driver used to use `struct timeval` internally.) The first bug is that the code checks if `scan_begin_arg == TRIG_TIMER` when it should be checking if `scan_begin_src == TRIG_TIMER`. The bugged check will always fail because if `scan_begin_src == TRIG_TIMER`, then `scan_begin_arg` will be at least 1000 (`NSEC_PER_USEC`), otherwise `scan_begin_src == TRIG_FOLLOW` and `scan_begin_arg` will be 0. (N.B `TRIG_TIMER` is defined as `0x10`.) The second bug is that is rounding the maximum value down to a multiple of 1000000000 (`NSEC_PER_SEC`) instead of 1000 (`NSEC_PER_USEC`), however this bug is not reached due to the first bug. This patch fixes both bugs. Fixes: 783ddaebd397 ("staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW") Fixes: 5afdcad2f818 ("staging: comedi: comedi_test: limit maximum convert_arg") Cc: stable Signed-off-by: Ian Abbott Link: https://patch.msgid.link/20260422144637.27692-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 0bc71228fe0fc0f90c4e04662d493a9fb679705b Author: Ian Abbott Date: Wed Apr 22 17:21:19 2026 +0100 comedi: comedi_test: fix check for valid scan_begin_src in waveform_ai_cmdtest() commit 542f5248cb481073203e0dadab5bcbd28aeae308 upstream. Commit 783ddaebd397 ("staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW") neglected to add a test that `scan_begin_src` has only one bit set. The allowed values are `TRIG_FOLLOW` and `TRIG_TIMER`, but the code incorrectly also allows `TRIG_FOLLOW | TRIG_TIMER`. Add a call to `comedi_check_trigger_is_unique()` to check that only one trigger source bit is set. Fixes: 783ddaebd397 ("staging: comedi: comedi_test: support scan_begin_src == TRIG_FOLLOW") Cc: stable Signed-off-by: Ian Abbott Link: https://patch.msgid.link/20260422162138.36003-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 234189f082cd8d8c0bb4949028dcb4f053204fd7 Author: Nicolás Bazaes Date: Wed May 13 21:35:49 2026 -0400 Input: synaptics - add LEN2058 to SMBus passlist for ThinkPad E490 commit 16ca52bc209fa4bf9239cd9e5643e95533476b58 upstream. The Lenovo ThinkPad E490 (PNP ID: LEN2058) has a Synaptics TM3471-020 touchpad that supports SMBus/RMI4 mode but is not listed in smbus_pnp_ids[]. Without this entry, RMI4 over SMBus is not enabled by default, and the touchpad falls back to PS/2 mode. Adding LEN2058 to the passlist enables automatic RMI4 detection without requiring the psmouse.synaptics_intertouch parameter, and matches the behavior of similar ThinkPad models already in the list (E480/LEN2054, E580/LEN2055). Tested on ThinkPad E490 with kernel 7.0.5-zen1 and Arch Linux. RMI4 over SMBus is confirmed working without any kernel parameters. Signed-off-by: Nicolás Bazaes Assisted-by: Claude:claude-sonnet-4-6 Link: https://patch.msgid.link/20260514013552.14234-1-contacto@bazaes.cl Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 5c3681c3abc35cfac6b702251382312c60d96bc2 Author: Dmitry Torokhov Date: Mon May 4 11:54:45 2026 -0700 Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem commit baa0210fb6a9dc3882509a9411b6d284d88fe30e upstream. When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=. Fixes: 50a77c658b80 ("Input: atmel_mxt_ts - download device config using firmware loader") Cc: stable@vger.kernel.org Assisted-by: Gemini:gemini-3.1-pro Reviewed-by: Ricardo Ribalda Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 5d7ab86e2b6bc23054616bf6ac562013bf60af8c Author: Jingguo Tan Date: Mon May 18 17:06:48 2026 +0800 xfrm: esp: restore combined single-frag length gate commit dfa0d7b0ff1eb6b2c416b8fdb9b4f2cefba57a40 upstream. The ESP out-of-place fast path appends the trailer in esp_output_head() before esp_output_tail() allocates the destination page frag. The head-side gate currently checks skb->data_len and tailen separately, but the tail code allocates a single destination frag from the combined post-trailer skb->data_len. Reject the page-frag fast path when the combined aligned length exceeds a page. Otherwise skb_page_frag_refill() may fall back to a single page while the destination sg still spans the combined skb->data_len. Restore this combined-length page gate for both IPv4 and IPv6. Fixes: 5bd8baab087d ("esp: limit skb_page_frag_refill use to a single page") Cc: stable@vger.kernel.org Signed-off-by: Lin Ma Signed-off-by: Chenyuan Mi Signed-off-by: Jingguo Tan Reviewed-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit ebc89798e6b20f728caf4030d2e77e9cc1b8d4e0 Author: Srinivas Kandagatla Date: Mon May 18 09:23:43 2026 +0000 ASoC: qcom: q6asm-dai: do not set stream state in event and trigger callbacks commit cee3e63e7106c3c81b2053371fdf14240bfba2fc upstream. The q6asm-dai stream state is used by prepare() to decide whether an existing stream setup needs to be closed before opening/configuring a new one. Updating the state from trigger or asynchronous DSP callbacks can make that state stale or incorrect relative to the actual setup lifetime. In particular, setting Q6ASM_STREAM_STOPPED on STOP or EOS completion can make prepare() believe there is no active setup to close, which can result in opening/configuring the same stream more than once. Keep stream state updates tied to prepare(), where the stream is actually closed and reopened, and stop changing it from trigger and EOS callbacks. Fixes: bfbb12dfa144 ("ASoC: qcom: q6asm-dai: perform correct state check before closing") Cc: Stable@vger.kernel.org Closes: https://lore.kernel.org/all/afS7rTHdc9TyIeLx@rdacayan/ Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-2-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 0ff7fbdbf61a2ddd2a34b7abaff5b5e4fafe8ad8 Author: Srinivas Kandagatla Date: Mon May 18 09:23:44 2026 +0000 ASoC: qcom: q6asm-dai: close stream only when running commit 048c540ee76ded666bda74f9dae1ca3254e0633c upstream. q6asm_dai_close() and q6asm_dai_compr_free() currently issue CMD_CLOSE whenever prtd->state is non-zero. After prepare() closes an existing stream, the state is updated to Q6ASM_STREAM_STOPPED. Since this state is also non-zero, the close and free paths can send CMD_CLOSE again for a stream that has already been closed. Restrict CMD_CLOSE to the Q6ASM_STREAM_RUNNING state so the command is sent only when the ASM stream is still active. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-3-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 6476c17d536dbd321c073242e762ddb2713a1238 Author: Hamza Mahfooz Date: Mon May 11 10:43:14 2026 -0400 netfilter: conntrack: tcp: do not force CLOSE on invalid-seq RST without direction check commit bed6e04be8e6b9133d8b16d5a42d0e0ce674fa9a upstream. An unintended behavior in the TCP conntrack state machine allows a connection to be forced into the CLOSE state using an RST packet with an invalid sequence number. Specifically, after a SYN packet is observed, an RST with an invalid SEQ can transition the conntrack entry to TCP_CONNTRACK_CLOSE, regardless of whether the RST corresponds to the expected reply direction. The relevant code path assumes the RST is a response to an outgoing SYN, but does not validate packet direction or ensure that a matching SYN was actually sent in the opposite direction. As a result, a crafted packet sequence consisting of a SYN followed by an invalid-sequence RST can prematurely terminate an active NAT entry. This makes connection teardown easier than intended. So, tighten the state transition logic to ensure that RST-triggered CLOSE transitions only occur when the RST is a valid response to a previously observed SYN in the correct direction. Cc: stable@vger.kernel.org Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Hamza Mahfooz Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman commit f34726477fa9f03523c8b67eb9628df667ee2035 Author: Michael Bommarito Date: Fri May 15 11:45:31 2026 -0400 xfrm: ah: use skb_to_full_sk in async output callbacks commit 79d8be262377f7112cfa3088dfc4142d5a2533f3 upstream. When AH output is offloaded to an asynchronous crypto provider (hardware accelerators such as AMD CCP, or a forced-async software shim used for testing), the digest completion fires ah_output_done() / ah6_output_done() on a workqueue. The egress skb at that point may have been originated by a TCP listener sending a SYN-ACK, which sets skb->sk to a request_sock via skb_set_owner_edemux(); it may also have been originated by an inet_timewait_sock retransmit. Neither is a full struct sock, and passing the raw skb->sk to xfrm_output_resume() then forwards a non-full socket through the rest of the xfrm output chain. xfrm_output_resume() and its downstream consumers expect a full sk where they dereference at all. The natural egress path through ah_output_done() does not crash today because the consumers that read past sock_common are either gated by sk_fullsock() or short-circuit on flags that are clear on a fresh request_sock; an exhaustive walk of the 50 most plausible consumers under sch_fq, dev_queue_xmit, netfilter, tc-egress and cgroup-egress BPF found no current unguarded deref. The bug is still a real type confusion that future consumer changes could turn into a memory-corruption primitive. This is the same bug class fixed for ESP in commit 1620c88887b1 ("xfrm: Fix the usage of skb->sk"). Apply the analogous fix to AH: convert skb->sk to a full socket pointer (or NULL) via skb_to_full_sk() before handing it to xfrm_output_resume(). The same async AH callbacks were touched recently for an independent ESN-related ICV layout bug in commit ec54093e6a8f ("xfrm: ah: account for ESN high bits in async callbacks"); the sk type-confusion addressed here is orthogonal. This patch is part of an ongoing audit of the AH callback paths; an ah_output ihl-validation hardening series is also currently under review on netdev. Reproduced under UML + KASAN + lockdep with a forced-async hmac(sha1) shim that registers at priority 9999 and wraps the sync in-tree hmac-sha1-lib. With the shim loaded, ah_output_done runs on every SYN-ACK egress through a transport-mode AH SA and skb->sk arrives as a request_sock (TCP_NEW_SYN_RECV); after this patch, xfrm_output_resume() receives the listener (the result of sk_to_full_sk()) and consumer derefs land on full-sock fields as intended. Fixes: 9ab1265d5231 ("xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 6df8157547347b5257bf640a0ae3dfc4411e06cd Author: Maoyi Xie Date: Mon May 4 22:27:36 2026 +0800 xfrm: route MIGRATE notifications to caller's netns commit 7e2a4f7ca0952820731ef7bdadfc9a9e9d3571b4 upstream. xfrm_send_migrate() in net/xfrm/xfrm_user.c and pfkey_send_migrate() in net/key/af_key.c both hardcode &init_net for the multicast that announces a successful XFRM_MSG_MIGRATE / SADB_X_MIGRATE. XFRM_MSG_MIGRATE arrives on a per-netns NETLINK_XFRM socket, and the rest of the xfrm/af_key netlink path was made netns-aware in 2008. The other 14 multicast paths in xfrm_user.c route their event using xs_net(x), xp_net(xp) or sock_net(skb->sk); only the migrate path was missed. Two consequences of the init_net hardcoding: 1. The notification (selector, old/new endpoint addresses, and the km_address) is delivered to listeners on init_net's XFRMNLGRP_MIGRATE / pfkey BROADCAST_ALL groups rather than on the issuing netns. An IKE daemon running in init_net therefore receives migration notifications originating from any other netns on the host. 2. An IKE daemon running inside a non-init netns and subscribed to its own XFRMNLGRP_MIGRATE / pfkey groups never receives the notification of its own migration. IKEv2 MOBIKE / address-update handling inside a netns is silently broken. Thread struct net through km_migrate() and the xfrm_mgr.migrate function pointer, drop the &init_net override in xfrm_send_migrate() and pfkey_send_migrate(), and pass the caller's net (already in scope in xfrm_migrate() via sock_net(skb->sk)) all the way down. struct xfrm_mgr is in-tree only and not exported as a stable API, so the function-pointer signature change is internal. pfkey_broadcast() is already netns-aware via net_generic(net, pfkey_net_id) since the pernet conversion. The five other pfkey_broadcast() callers in af_key.c already pass xs_net(x), sock_net(sk) or a per-netns net, so this only removes the &init_net outlier. Fixes: 5c79de6e79cd ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit b99366d74b535d0cadb1ef73e04639415d9ff3b7 Author: Ashutosh Desai Date: Tue May 5 17:07:12 2026 +0000 nfc: hci: fix out-of-bounds read in HCP header parsing commit f040e590c035bfd9553fe79ee9585caf1b14d67b upstream. Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header. Fixes: 8b8d2e08bf0d ("NFC: HCI support") Fixes: 11f54f228643 ("NFC: nci: Add HCI over NCI protocol support") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman Signed-off-by: Ashutosh Desai Link: https://patch.msgid.link/20260505170712.96560-1-ashutoshdesai993@gmail.com Signed-off-by: David Heidelberg Signed-off-by: Greg Kroah-Hartman commit 5de58df307dfc25bb074ae0a55924e733bc8b209 Author: Arnd Bergmann Date: Wed May 13 16:53:54 2026 +0200 iommu, debugobjects: avoid gcc-16.1 section mismatch warnings commit 4c9ad387aa2d6785299722e54224d34764edaeb3 upstream. gcc-16 has gained some more advanced inter-procedual optimization techniques that enable it to inline the dummy_tlb_add_page() and dummy_tlb_flush() function pointers into a specialized version of __arm_v7s_unmap: WARNING: modpost: vmlinux: section mismatch in reference: __arm_v7s_unmap+0x2cc (section: .text) -> dummy_tlb_add_page (section: .init.text) ERROR: modpost: Section mismatches detected. >From what I can tell, the transformation is correct, as this is only called when __arm_v7s_unmap() is called from arm_v7s_do_selftests(), which is also __init. Since __arm_v7s_unmap() however is not __init, gcc cannot inline the inner function calls directly. In debug_objects_selftest(), the same thing happens. Both the caller and the leaf function are __init, but the IPA pulls it into a non-init one: WARNING: modpost: vmlinux: section mismatch in reference: lookup_object_or_alloc+0x7c (section: .text.lookup_object_or_alloc) -> is_static_object (section: .init.text) Marking the affected functions as not "__init" would reliably avoid this issue but is not a good solution because it removes an otherwise correct annotation. I tried marking the functions as 'noinline', but that ended up not covering all the affected configurations. With some more experimenting, I found that marking these functions as __attribute__((noipa)) is both logical and reliable. In order to keep the syntax readable, add a custom macro for this in include/linux/compiler_attributes.h next to other related macros and use it to annotate both files. Link: https://lore.kernel.org/all/abRB6g-48ZX6Yl2r@willie-the-truck/ Cc: Will Deacon Cc: Thomas Gleixner Cc: Andrew Morton Cc: Miguel Ojeda Cc: linux-kbuild@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Acked-by: Will Deacon Acked-by: Thomas Gleixner Acked-by: Miguel Ojeda Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman commit 83bd8a5756a3c4a413ed8f6253f9eb2821e1ccaf Author: Lee Jones Date: Wed May 27 17:05:26 2026 +0100 HID: wacom: Fix OOB write in wacom_hid_set_device_mode() commit c0a8899e02ddebd51e2589835182c239c2e224ae upstream. wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. Cc: stable@vger.kernel.org Fixes: 5ae6e89f7409 ("HID: wacom: implement the finger part of the HID generic handling") Tested-by: Ping Cheng Reviewed-by: Ping Cheng Signed-off-by: Lee Jones Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman commit f5c68875e25f331e497ddfbe81e2d8163a87f136 Author: Kuniyuki Iwashima Date: Thu May 21 21:05:54 2026 +0800 ip6: vti: Use ip6_tnl.net in vti6_changelink(). commit 11b326fb0a374f4654f9be22d0f0f7abd9f7d3fe upstream. ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. Fixes: 61220ab34948 ("vti6: Enable namespace changing") Reported-by: Maoyi Xie Reviewed-by: Eric Dumazet Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260521130555.3421684-2-maoyixie.tju@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 2df7059a18afb7d3aee6c36cad5d371c198111d4 Author: Zhengchuan Liang Date: Fri May 22 17:31:55 2026 +0800 xfrm: input: hold netns during deferred transport reinjection commit c16f74dc1d75d0e2e7670076d5375deda110ebeb upstream. Transport-mode reinjection stores a struct net pointer in skb->cb and uses it later from xfrm_trans_reinject(). That pointer must stay valid until the deferred callback runs. Take a netns reference when queueing deferred reinjection work and drop it after the callback completes. Use maybe_get_net() so the queueing path does not revive a namespace that is already being torn down. This keeps the existing workqueue design and fixes the netns lifetime handling in one place for all users of xfrm_trans_queue_net(). Fixes: 7b3801927e52 ("xfrm: introduce xfrm_trans_queue_net") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Xin Liu Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Assisted-by: Codex:gpt-5.4 Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman commit 931b4a1f13408c2507719890f78f7227c34a0282 Author: Qi Tang Date: Sat May 23 22:32:45 2026 +0800 ipv6: validate extension header length before copying to cmsg commit dd433671fef381fdaf7b530c631e6b782d66e224 upstream. ip6_datagram_recv_specific_ctl() builds IPV6_{HOPOPTS,DSTOPTS,RTHDR} cmsgs (and their IPV6_2292* legacy counterparts) by trusting the on-wire hdrlen byte (ptr[1]) when computing the put_cmsg() length. The length was validated only at parse time (ipv6_parse_hopopts(), etc.). An nftables payload-write expression can rewrite hdrlen after parsing and before the skb reaches recvmsg; the write itself is in-bounds but put_cmsg() then reads up to ((hdrlen+1) << 3) = 2040 bytes from an 8-byte header. nftables is reachable from an unprivileged user namespace, so this is an unprivileged slab-out-of-bounds read: BUG: KASAN: slab-out-of-bounds in put_cmsg+0x3ac/0x540 put_cmsg+0x3ac/0x540 udpv6_recvmsg+0xca0/0x1250 sock_recvmsg+0xdf/0x190 ____sys_recvmsg+0x1b1/0x620 Add ipv6_get_exthdr_len() which validates that at least two bytes are accessible before reading the hdrlen field, then checks the computed length against skb_tail_pointer(skb), returning 0 on failure. Extension headers are kept in the linear skb area by pskb_may_pull() during input, so skb_tail_pointer() is the correct bound. Use ipv6_get_exthdr_len() at all non-AH call sites: the five standalone cmsg blocks (HbH, 2292HbH, 2292DSTOPTS x2, 2292RTHDR) and the three standard cases in the extension-header walk loop (DSTOPTS, ROUTING, default). AH retains an inline bounds check because its length formula differs ((ptr[1]+2)<<2). The walk loop also gets a pre-read bounds check at the top to validate ptr before any case accesses ptr[0] or ptr[1]. When the walk loop detects a corrupted header, return from the function instead of continuing to process later socket options. Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Qi Tang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260523143245.2281415-1-tpluszz77@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit df42ac708acc3399bbb6dc5ca16e0540adda7bbf Author: Maoyi Xie Date: Thu May 21 21:05:55 2026 +0800 ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate(). commit 8b484efd5cb4eeef9021a661e198edc5349dacf6 upstream. After patch 1/2 in this series, vti6_update() unlinks and relinks the tunnel through t->net. vti6_siocdevprivate() still uses dev_net(dev) for the collision lookup. For a tunnel moved through IFLA_NET_NS_FD, dev_net(dev) is the new netns, not t->net. SIOCCHGTUNNEL on a migrated tunnel then runs: net = dev_net(dev) /* migrated netns */ t = vti6_locate(net, &p1, false) /* misses target in t->net */ ... t = netdev_priv(dev) vti6_update(t, &p1, false) /* mutates t->net's hash */ A caller in the migrated netns picks params that match a tunnel in the creation netns. The lookup in dev_net(dev) finds nothing. vti6_update() prepends the migrated tunnel at the head of the creation netns hash bucket for those params. Later lookups in the creation netns resolve to the migrated device. xfrm receive delivers the matched packets through a device the caller controls. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. Switch the SIOCCHGTUNNEL path on a non fallback device to use t->net for the lookup. The lookup now matches the netns vti6_update() operates on. Also add ns_capable(self->net->user_ns, CAP_NET_ADMIN) before the lookup. The check at the top of the case is against dev_net(dev)->user_ns, which after migration is the attacker's netns. A caller there can pick params absent from self->net, the lookup returns NULL, t becomes self, and vti6_update() inserts the device into the creation netns hash. The new check requires CAP_NET_ADMIN in the creation netns user_ns too. SIOCADDTUNNEL and SIOCCHGTUNNEL on the fallback device keep dev_net(dev), which equals init_net there. Fixes: 61220ab34948 ("vti6: Enable namespace changing") Suggested-by: Jakub Kicinski Suggested-by: Xiao Liang Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Maoyi Xie Link: https://patch.msgid.link/20260521130555.3421684-3-maoyixie.tju@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit f8aabed3ff3e986920cf02a2a2785e08e586b234 Author: Zhengchuan Liang Date: Fri May 22 17:42:26 2026 +0800 ipv6: exthdrs: refresh nh after handling HAO option commit f7b52afe3592eae66e160586b45a3f2242972c63 upstream. ip6_parse_tlv() caches skb_network_header(skb) in nh while walking IPv6 TLVs. ipv6_dest_hao() may call pskb_expand_head() for a cloned skb, which can move the skb head and invalidate the cached network header pointer. Refresh nh after ipv6_dest_hao() returns so any trailing padding or TLVs are parsed from the current skb head. This matches the existing pattern used in ip6_parse_tlv() after helpers that can modify skb header storage. Fixes: a831f5bbc89a ("[IPV6] MIP6: Add inbound interface of home address option.") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Xin Liu Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Reviewed-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/7aba1debc2196189172499e5769802b026f8caf8.1779247873.git.zcliangcn@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e506cc07d3b6d817fe6628ca3f5803241f4298b2 Author: Srinivas Kandagatla Date: Mon May 18 09:23:45 2026 +0000 ASoC: qcom: q6asm-dai: fix error handling in prepare and set_params commit 4b4db09f283df65d780bc7cee66cb4a7e9bf4770 upstream. Fix error handling in q6asm_dai_compr_set_params() and q6asm_dai_prepare() for both CMD_CLOSE and q6asm_unmap_memory_regions(). In both the functions, we are doing q6asm_audio_client_free in failure cases, which means if prepare or set_params fail, we can never recover. Now open and close are done in respective dai_open/close functions. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-4-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 645b99b1a185c91a79bdac4c5de0f91b212d64f0 Author: Justin Iurman Date: Fri May 22 13:20:13 2026 +0200 ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo() commit d47548a36639095939f4747d4c43f2271366f565 upstream. ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers. Let's recompute nh pointer to make sure any change won't mess things up. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260522112013.12342-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d15130461df388136b62a7b0ce9f66e7e2fa9ff1 Author: Junrui Luo Date: Wed May 20 11:47:55 2026 +0800 macsec: fix replay protection at XPN lower-PN wrap commit e68842b3356471ba56c882209f324613dac47f64 upstream. In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). Fixes: a21ecf0e0338 ("macsec: Support XPN frame handling - IEEE 802.1AEbw") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Link: https://patch.msgid.link/SYBPR01MB78813FD49E58F253B989F197AF012@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d81b323af2dcee47573907ccb89c0df9b45cb2e2 Author: Yuqi Xu Date: Wed May 27 11:48:15 2026 +0800 bpf: sockmap: fix tail fragment offset in bpf_msg_push_data commit f72eed9b84fb771019a955908132410a9ba9ea3f upstream. When bpf_msg_push_data() inserts data in the middle of a scatterlist entry, it splits the original entry into a left fragment and a right fragment. The right fragment offset is page-local, but the code advances it with `start`, which is the message-global insertion point. For inserts into a non-first SG entry, this over-advances the offset and leaves the split layout inconsistent. Advance the right fragment offset by the fragment-local delta, `start - offset`, which matches the length removed from the front of the original entry. Fixes: 6fff607e2f14 ("bpf: sk_msg program helper bpf_msg_push_data") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Zhengchuan Liang Reported-by: Xin Liu Signed-off-by: Yuqi Xu Signed-off-by: Ren Wei Link: https://patch.msgid.link/8b129d10566aa3eb43f61a8f9757bcf51707d324.1779636774.git.xuyq21@lenovo.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c2c3b33b3c0bf2c9427c0926817ef5ffac50de6f Author: Dmitry Torokhov Date: Sat Apr 25 22:07:06 2026 -0700 Input: elan_i2c - validate firmware size before use commit 76b0d0baa9ae9c60e726bbe1b6ff0bec2c993634 upstream. Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/ae2dOgiFvXRm4BHo@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 63b0dafa676aad4d0c3f01a61ad8e2990907660c Author: Dan Carpenter Date: Wed May 20 08:59:28 2026 +0300 usb: dwc2: Fix use after free in debug code commit 9ea06a3fbf9f16e0d98c52cb3b99642be15ec281 upstream. We're not allowed to dereference "urb" after calling usb_hcd_giveback_urb() so save the urb->status ahead of time. Fixes: 7359d482eb4d ("staging: HCD files for the DWC2 driver") Cc: stable Signed-off-by: Dan Carpenter Link: https://patch.msgid.link/ag1NwBpqT4IEQcdJ@stanley.mountain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 105f40696e6d58efbee0185bbd1b249453e97708 Author: Peter Chen Date: Wed May 13 16:53:10 2026 +0800 usb: cdns3: plat: fix unbalanced pm_runtime_forbid() call permanently leaks the runtime PM usage counter across bind/unbind cycles commit ae6f3b82324e4f39ad8443c9020787e6fc889637 upstream. Call pm_runtime_allow(dev) conditionally at cdns3_plat_remove. Fixes: f738957277ba ("usb: cdns3: Split core.c into cdns3-plat and core.c file") Cc: stable Reported-by: sashiko-bot Closes: https://lore.kernel.org/linux-devicetree/agKaEePSFknhDBg2@nchen-desktop/T/#m21e1d9c1574eb127ce03c0c2a1a49002ce435b52 Signed-off-by: Peter Chen Link: https://patch.msgid.link/20260513085310.2217547-3-peter.chen@cixtech.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 3cc1a09b2f2ece604e72b35d5a62385d3615e9b5 Author: Yongchao Wu Date: Thu May 14 00:00:12 2026 +0800 usb: cdns3: gadget: fix request skipping after clearing halt commit c8778ff817a7047d6848fefba99dcb27b1bf01fe upstream. According to the cdns3 datasheet, the EPRST (Endpoint Reset) command causes the DMA engine to reposition its internal pointer to the next Transfer Descriptor (TD) if it was already processing one. This issue is consistently observed during the ADB identification process on macOS hosts, where the host issues a Clear_Halt. Although commit 4bf2dd65135a ("usb: cdns3: gadget: toggle cycle bit before reset endpoint") attempted to avoid DMA advance by toggling the cycle bit, trace logs show that on certain hosts like macOS, the DMA pointer (EP_TRADDR) still shifts after EPRST: cdns3_ctrl_req: Clear Endpoint Feature(Halt ep1out) cdns3_doorbell_epx: ep1out, ep_trbaddr f9c04030 <-- Should be f9c04000 cdns3_gadget_giveback: ep1out: req: ... length: 16384/16384 As shown above, the DMA pointer jumped to the next TD, causing the controller to skip the initial TRBs of the request. This leads to data misalignment and ADB protocol hangs on macOS. Fix this by manually restoring the EP_TRADDR register to the starting physical address of the current request after the EPRST operation is complete. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Cc: Peter Chen Signed-off-by: Yongchao Wu Acked-by: Peter Chen Link: https://patch.msgid.link/20260513160012.2547894-1-yongchao.wu@autochips.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit b496e25ead5976bce2891dacaed09beb53a54f9f Author: Johan Hovold Date: Fri May 22 16:20:58 2026 +0200 USB: serial: omninet: fix memory corruption with small endpoint commit 60df93d30f9bdd27db17c4d80ed80ef718d7226b upstream. Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 2ff615fc455acda5425c4900160cbe11cfea4449 Author: Felix Gu Date: Thu Apr 30 21:29:06 2026 +0800 iio: buffer: hw-consumer: fix use-after-free in error path commit 6f5ed4f2c7c83f33344e0ba179f72a12e5dad4a4 upstream. In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe(). Fixes: 48b66f8f936f ("iio: Add hardware consumer buffer support") Reported-by: sashiko Closes: https://sashiko.dev/#/patchset/20260427-iio_buf-v1-1-2bbdac844647%40gmail.com Signed-off-by: Felix Gu Reviewed-by: Andy Shevchenko Reviewed-by: Nuno Sá Reviewed-by: Maxwell Doose Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit d1c7bad4d9c283d408a29ff26ef26394d009dfd5 Author: Aldo Conte Date: Tue Apr 7 17:17:01 2026 +0200 iio: light: cm3323: fix reg_conf not being initialized correctly commit 1f4f0bcc5255dec5c4c3a1551bf49d8c33b69b20 upstream. The code stores the return value of i2c_smbus_write_word_data() in data->reg_conf; however, this value represents the result of the write operation and not the value actually written to the configuration register. This meant that the contents of data->reg_conf did not truly reflect the contents of the hardware register. Instead, save the value of the register before the write and use this value in the I2C write. The bug was found by code inspection: i2c_smbus_write_word_data() returns 0 on success, not the value written to the register. Tested using i2c-stub on a Raspberry Pi 3B running a custom 6.19.10 kernel. Before loading the driver, the configuration register 0x00 CM3323_CMD_CONF was populated with 0x0030 using `i2cset -y 11 0x10 0x00 0x0030 w`, encoding an integration time of 320ms in bits[6:4]. Due to incorrect initialization of data->reg_conf in cm3323_init(), the print of integration_time returns 0.040000 instead of the expected 0.320000. This happens because the read of the integration_time depends on cm3323_get_it_bits() that is based on the value of data->reg_conf, which is erroneously set to 0. With this fix applied, data->reg_conf correctly saves 0x0030 after init and the successive integration_time reports 0.320000 as expected. Fixes: 8b0544263761 ("iio: light: Add support for Capella CM3323 color sensor") Cc: stable@vger.kernel.org Signed-off-by: Aldo Conte Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 671b867896e9476590425b44bce70b6ce13061a0 Author: Advait Dhamorikar Date: Tue Apr 7 12:50:59 2026 +0530 iio: magnetometer: st_magn: fix default DRDY pin selection for LIS2MDL commit 49f79cd28f1e3333cbe0d616ce59ead0b24bf34e upstream. The device tree binding for st,lis2mdl does not support st,drdy-int-pin property. However, when no platform data is provided and the property is absent, the driver falls back to default_magn_pdata which hardcodes drdy_int_pin = 2. This causes `st_sensors_set_drdy_int_pin` to fail with -EINVAL because the LIS2MDL sensor settings have no INT2 DRDY mask defined. Fix this by checking the sensor's INT2 DRDY mask availability at probe time and selecting the appropriate default pin. Sensors that do not support INT2 DRDY will default to INT1, while all others retain the existing default of INT2. Fixes: 38934daf7b5c ("iio: magnetometer: st_magn: Provide default platform data") Signed-off-by: Advait Dhamorikar Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 37dd98f32f6aee565dfee8054ec6330d0a027f3c Author: Salah Triki Date: Tue May 5 08:10:24 2026 +0100 iio: temperature: tsys01: fix broken PROM checksum validation commit 4701e471c16866e7aa8f5e6a3a6b0d31e097e2c9 upstream. The current implementation of tsys01_crc_valid() incorrectly sums the first word (n_prom[0]) repeatedly instead of iterating over the 8 words retrieved from the PROM. This leads to a checksum mismatch and probe failure on hardware. According to the TSYS01 datasheet, the PROM consists of 8 words. A valid check must iterate through all 8 words to verify the integrity of the calibration data. The current driver only checks the first word 8 times. Note: This fix was identified during a code audit and is based on datasheet specifications. It has not been tested on real hardware. Fixes: 43e53407f680 ("Add tsys01 meas-spec driver support") Signed-off-by: Salah Triki Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 772500198096c28ddeb72865c5cdef577537ee30 Author: Sanjay Chitroda Date: Sun Apr 26 14:47:04 2026 +0530 iio: ssp_sensors: cancel delayed work_refresh on remove commit eedf7602fbd929e97e0c480da501dc7a34beb2a8 upstream. The work_refresh may still be pending or running when the device is removed, cancel the delayed work_refresh in remove path. Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver") Signed-off-by: Sanjay Chitroda Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 8654b5e2617819ff4f7c78071dfd0275e971a9b6 Author: David Carlier Date: Tue May 5 14:37:48 2026 +0100 iio: gyro: itg3200: fix i2c read into the wrong stack location commit 6bdc3023d62ed5c7d591f0eb27a5adb37fb892ae upstream. itg3200_read_all_channels() takes `__be16 *buf' as a parameter and fills the i2c_msg destination as `(char *)&buf'. Since `buf' is the parameter (a pointer), `&buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch. i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak. The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct. Drop the spurious `&' so the i2c read writes into the caller's buffer. Fixes: 9dbf091da080 ("iio: gyro: Add itg3200") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9d502a1bc30461a561a73da0b6709936d42980c9 Author: Salah Triki Date: Thu May 7 20:07:51 2026 +0100 iio: adc: viperboard: Fix error handling in vprbrd_iio_read_raw commit 422b5bbf333f75fb486855ad0eedc23cf21f3277 upstream. The driver proceeds to the reception phase even if the preceding transmission fails. This uses a goto error label for an early bail out and ensures the mutex is properly unlocked in case of failure. Fixes: ffd8a6e7a778 ("iio: adc: Add viperboard adc driver") Signed-off-by: Salah Triki Reviewed-by: Joshua Crofts Reviewed-by: Maxwell Doose Reviewed-by: Nuno Sá Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 36031acc04e1f637e40659af6c963635ae82407f Author: Jason A. Donenfeld Date: Fri May 29 19:31:34 2026 +0200 wireguard: send: append trailer after expanding head commit f75e3eb08fe31d30a9af6ed80cdd22e6772837e2 upstream. With how this is currently written, we add the trailer, zero it out, and then add the header space on. If that header space requires a reallocation + copy, the zeros in the trailer aren't copied, because the skb len hasn't actually been yet expanded to cover that. Instead add the padding at the end of the process rather than at the beginning. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld Link: https://patch.msgid.link/20260529173134.3080773-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 97e37b8ea79eb0ee2a93c26272e284f872700231 Author: Rodrigo Alencar Date: Fri May 1 10:14:55 2026 +0100 iio: dac: ad5686: fix input raw value check commit d01220ee5e43c65a206df827b39bf5cf5f7b9dce upstream. Fix range check for input raw value, which is off by one, i.e., for a 10-bit DAC the max valid value is 1023, but 1 << 10 equals 1024, which passes the previous check, allowing an out-of-range write. The issue exists since the ad5686 driver was first introduced. Fixes: c2f37c8dcadc ("iio: dac: New driver for AD5686R, AD5685R, AD5684R Digital to analog converters") Reviewed-by: Andy Shevchenko Signed-off-by: Rodrigo Alencar Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 563e28acbeb55c4b48fcfc8f7fa808bdd3e06d21 Author: Salah Triki Date: Mon Apr 27 22:33:19 2026 +0100 iio: dac: max5821: fix return value check in powerdown sync commit d0a228d903425e653f18a4341e60c0538afb6d41 upstream. The function max5821_sync_powerdown_mode() returned the result of i2c_master_send() directly. If a partial transfer occurred, it would be incorrectly treated as a success by the caller. While the caller currently handles the positive return value of 2 as success, this patch refactors the function to return 0 on full success and -EIO on short writes. This ensures robust error handling for incomplete transfers and improves code maintainability by using sizeof(outbuf). Fixes: 472988972737 ("iio: add support of the max5821") Signed-off-by: Salah Triki Reviewed-by: Andy Shevchenko Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 4d7eab55eea0d1b0aa89a6c1568e39e1b46775e5 Author: Christofer Jonason Date: Wed Mar 4 10:07:27 2026 +0100 iio: adc: xilinx-xadc: Fix sequencer mode in postdisable for dual mux commit 852534744c2d35626a604f128ff0b8ec12805591 upstream. xadc_postdisable() unconditionally sets the sequencer to continuous mode. For dual external multiplexer configurations this is incorrect: simultaneous sampling mode is required so that ADC-A samples through the mux on VAUX[0-7] while ADC-B simultaneously samples through the mux on VAUX[8-15]. In continuous mode only ADC-A is active, so VAUX[8-15] channels return incorrect data. Since postdisable is also called from xadc_probe() to set the initial idle state, the wrong sequencer mode is active from the moment the driver loads. The preenable path already uses xadc_get_seq_mode() which returns SIMULTANEOUS for dual mux. Fix postdisable to do the same. Fixes: bdc8cda1d010 ("iio:adc: Add Xilinx XADC driver") Cc: stable@vger.kernel.org Signed-off-by: Christofer Jonason Reviewed-by: Andy Shevchenko Reviewed-by: Nuno Sá Reviewed-by: Salih Erim Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 290f515c5e3b3900bc2fe24f179999fd08d23bfa Author: Ben Hutchings Date: Tue May 5 20:45:12 2026 +0200 parport: Fix race between port and client registration commit ef15ccbb3e8640a723c42ad90eaf81d66ae02017 upstream. The parport subsystem registers port devices before they are fully initialised, resulting in a race condition where client drivers such as lp can attach to ports that are not completely initialised or even being torn down. When the port and client drivers are built as modules and loaded around the same time during boot, this occasionally results in a crash. I was able to make this happen reliably in a VM with a PC-style parallel port by patching parport_pc to fail probing: > --- a/drivers/parport/parport_pc.c > +++ b/drivers/parport/parport_pc.c > @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base, > if (!p) > goto out3; > > - base_res = request_region(base, 3, p->name); > + base_res = NULL; > if (!base_res) > goto out4; > and then running: while true; do modprobe lp & modprobe parport_pc wait rmmod lp parport_pc done for a few seconds. In the long term I think port registration should be changed to put the call to device_add() inside parport_announce_port(), but since the latter currently cannot fail this will require changing all port drivers. For now, add a flag to indicate whether a port has been "announced" and only try to attach client drivers to ports when the flag is set. Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem") Closes: https://bugs.debian.org/1130365 Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/ Cc: stable Signed-off-by: Ben Hutchings Acked-by: Sudip Mukherjee Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 1f08a90013e1e632b34321334e861fcefc056505 Author: Muhammad Bilal Date: Wed May 20 18:56:43 2026 -0400 Bluetooth: HIDP: fix missing length checks in hidp_input_report() commit 2a3ac9ee11dbb9845f3947cef4a79dba658cf6f6 upstream. hidp_input_report() reads keyboard and mouse payload data from an skb without first verifying that skb->len contains enough data. hidp_recv_intr_frame() pulls the 1-byte HIDP header before dispatching to hidp_input_report(). If a paired device sends a truncated packet, the handler reads beyond the valid skb data, resulting in an out-of-bounds read of skb data. The OOB bytes may be interpreted as phantom key presses or spurious mouse movement. Replace the open-coded length tracking and pointer arithmetic with skb_pull_data() calls. skb_pull_data() returns NULL if the requested bytes are not present, eliminating the need for a manual size variable and the separate skb->len guard. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit b5c59a5b469e2a809a2d57eda4ded94235971060 Author: Siwei Zhang Date: Wed May 20 22:30:36 2026 -0400 Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn commit 9dbd84990394c51f5cee1e8871bb5ff8af5ed939 upstream. __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return. Fixes: adf0398cee86 ("Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout") Cc: stable@vger.kernel.org Signed-off-by: Siwei Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 8c58a92849175f5e2ab7bc2734b3b89afe79f6ef Author: Linpu Yu Date: Sun May 10 13:43:30 2026 +0800 ipc: limit next_id allocation to the valid ID range commit fa0b9b2b7ae3539908d69c2b9ac0d144d9bc5139 upstream. The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted. Link: https://lore.kernel.org/cover.1778336914.git.linpu5433@gmail.com Link: https://lore.kernel.org/2eebe949bfa7d1f6e13b5be6a92c64c850ce9d45.1778336914.git.linpu5433@gmail.com Fixes: 03f595668017 ("ipc: add sysctl to specify desired next object id") Signed-off-by: Linpu Yu Signed-off-by: Ren Wei Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Cc: Kees Cook Cc: Stanislav Kinsbursky Cc: Davidlohr Bueso Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit d98d8562b3284b5a5c8eb67e71b794508e46e288 Author: Mikulas Patocka Date: Mon May 25 14:48:58 2026 +0200 hpfs: fix a crash if hpfs_map_dnode_bitmap fails commit 974820a59efde7c1a7e1260bcfe9bb81f833cc9f upstream. If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash. Signed-off-by: Mikulas Patocka Reported-by: Farhad Alemi Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit c7fe9c60fabf084eb7315d4e44444f4ea159399d Author: Shuai Zhang Date: Thu May 21 13:25:47 2026 +0800 Bluetooth: btusb: Allow firmware re-download when version matches commit 82855073c1081732656734b74d7d1d5e4cfd0da7 upstream. The Bluetooth host decides whether to download firmware by reading the controller firmware download completion flag and firmware version information. If a USB error occurs during the firmware download process (for example due to a USB disconnect), the download is aborted immediately. An incomplete firmware transfer does not cause the controller to set the download completion flag, but the firmware version information may be updated at an early stage of the download process. In this case, after USB reconnection, the host attempts to re-download the firmware because the download completion flag is not set. However, since the controller reports the same firmware version as the target firmware, the download is skipped. This ultimately results in the firmware not being properly updated on the controller. This change removes the restriction that skips firmware download when the versions are equal. It covers scenarios where the USB connection can be disconnected at any time and ensures that firmware download can be retriggered after USB reconnection, allowing the Bluetooth firmware to be correctly and completely updated. Fixes: 3267c884cefa ("Bluetooth: btusb: Add support for QCA ROME chipset family") Cc: stable@vger.kernel.org Signed-off-by: Shuai Zhang Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit e53d55a8981d80f8fac0ae3d0dd38105b6974b6d Author: Thomas Fourier Date: Fri May 22 10:54:04 2026 +0200 Input: ims-pcu - fix usb_free_coherent() size in ims_pcu_buffers_free() commit dab48a7e74e6a394f3aa0461a2b1fb0c7b38fcb8 upstream. The input buffer size is pcu->max_in_size, but pcu->max_out_size is passed to usb_free_coherent(). Change size to match the allocation size. Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260522085412.45430-2-fourier.thomas@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit c7336c0fba5c959249f3d793d33076b992ec3ee4 Author: Johan Hovold Date: Fri May 22 16:22:18 2026 +0200 USB: serial: safe_serial: fix memory corruption with small endpoint commit 438061ed1ad85e6743e2dce826671772d81089ec upstream. Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit f2a1edc0bd142edabc6c85d88713f2bc178dd317 Author: Greg Kroah-Hartman Date: Wed May 13 17:52:48 2026 +0200 usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer() commit 4af7ad0e6d7aa4403dbb1dac7b9659b0421efcaa upstream. wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++) regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i); which has two problems: USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified. Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq(). Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports. Assisted-by: gkh_clanker_t1000 Cc: stable Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/2026051347-clustered-deflected-9543@gregkh Signed-off-by: Greg Kroah-Hartman commit dd7118c010f324497c275e8fd7a35c9baaa2a00f Author: Greg Kroah-Hartman Date: Wed May 13 17:52:49 2026 +0200 usb: typec: altmodes/displayport: validate count before reading Status Update VDO commit 8a18f896e667df491331371b55d4ad644dc51d60 upstream. A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object. Assisted-by: gkh_clanker_t1000 Cc: stable Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/2026051350-reacquire-sculpture-4244@gregkh Signed-off-by: Greg Kroah-Hartman commit f9699b9e0399125ef22d42524e5cc717492fcd99 Author: Greg Kroah-Hartman Date: Wed May 13 17:52:54 2026 +0200 usb: typec: ucsi: displayport: NAK DP_CMD_CONFIGURE without a payload VDO commit 167dd8d12226587ee554f520aed0256b7769cd5d upstream. ucsi_displayport_vdm() handles a DP_CMD_CONFIGURE by copying the first payload VDO from data[], but unlike the equivalent handler in altmodes/displayport.c it does not check that count covers a VDO beyond the header. A header-only Configure VDM (count == 1) would read one u32 past the caller's array. In the normal UCSI path the caller controls count, so this is hardening for non-standard delivery paths. NAK and bail when no configuration VDO is present, matching the generic DP altmode driver's existing guard. Assisted-by: gkh_clanker_t1000 Cc: Pooja Katiyar Cc: Johan Hovold Cc: stable Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/2026051351-vividly-flattered-eb3d@gregkh Signed-off-by: Greg Kroah-Hartman commit 2f395ca1263bd181995eb829f5943a83a20db213 Author: Greg Kroah-Hartman Date: Thu May 14 19:10:06 2026 +0200 usb: typec: ucsi: ccg: reject firmware images without a ':' record header commit d7486952bf74e546ee3748fb14b2d07881fa6273 upstream. do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL. Assisted-by: gkh_clanker_t1000 Cc: stable Cc: Heikki Krogerus Reviewed-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026051405-posture-shrill-7884@gregkh Signed-off-by: Greg Kroah-Hartman commit fe1a7f99e72ebd2880515332b79b8c256be22aca Author: Greg Kroah-Hartman Date: Thu Apr 9 15:40:48 2026 +0200 iio: imu: st_lsm6dsx: fix stack leak in tagged FIFO buffer commit c9d8e9adaa63150ef7e833480b799d0bab83a276 upstream. The tagged FIFO path declares iio_buff on the stack with __aligned(8) but no initializer, but there is a hole in the structure, which will then leak to userspace as ST_LSM6DSX_SAMPLE_SIZE bytes (6) will be copied, but the space between that and the timestamp are not initialized. Commit c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") moved the untagged FIFO path to a kzalloc'd buffer in hw->scan, but for the tagged path it only added the alignment qualifier and not the initializer :( Fix this by just zero-initializing the structure on the stack. Cc: Lorenzo Bianconi Cc: Jonathan Cameron Cc: David Lechner Cc: "Nuno Sá" Cc: Andy Shevchenko Fixes: c14edb4d0bdc ("iio:imu:st_lsm6dsx Fix alignment and data leak issues") Cc: stable Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Reviewed-by: David Lechner Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit aa4cf7615328eae44f3b4bf5f4fde3fb390c27c6 Author: Stefan Metzmacher Date: Wed Jun 3 16:15:09 2026 +0800 smb: client: fix smbdirect_recv_io leak in smbd_negotiate() error path [ Upstream commit daac51c7032036a0ca5f1aa419ad1b0471d1c6e0 ] During tests of another unrelated patch I was able to trigger this error: Objects remaining on __kmem_cache_shutdown() Cc: Steve French Cc: Tom Talpey Cc: Long Li Cc: Namjae Jeon Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Stefan Metzmacher Signed-off-by: Steve French Signed-off-by: Robert Garcia Signed-off-by: Sasha Levin commit dbdcbacd585e9ef0740cdc4f31ece96afb483d6a Author: Horatiu Vultur Date: Thu Oct 23 21:13:49 2025 +0200 phy: mscc: Use PHY_ID_MATCH_EXACT for VSC8584, VSC8582, VSC8575, VSC856X [ Upstream commit 1bc80d673087e5704adbb3ee8e4b785c14899cce ] As the PHYs VSC8584, VSC8582, VSC8575 and VSC856X exists only as rev B, we can use PHY_ID_MATCH_EXACT to match exactly on revision B of the PHY. Because of this change then there is not need the check if it is a different revision than rev B in the function vsc8584_probe() as we already know that this will never happen. These changes are a preparation for the next patch because in that patch we will make the PHYs VSC8574 and VSC8572 to use vsc8584_probe() and these PHYs have multiple revision. Reviewed-by: Maxime Chevallier Signed-off-by: Horatiu Vultur Link: https://patch.msgid.link/20251023191350.190940-2-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 30781c9520b720126472bfc7336530b867c01248 Author: Harini Katakam Date: Mon May 29 17:50:16 2023 +0530 phy: mscc: Use PHY_ID_MATCH_VENDOR to minimize PHY ID table [ Upstream commit 31605c01fb242806f5b8c9d08abe11328d514206 ] All the PHY devices variants specified have the same mask and hence can be simplified to one vendor look up for 0x00070400. Any individual config can be identified by PHY_ID_MATCH_EXACT in the respective structure. Signed-off-by: Harini Katakam Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Stable-dep-of: 1bc80d673087 ("phy: mscc: Use PHY_ID_MATCH_EXACT for VSC8584, VSC8582, VSC8575, VSC856X") Signed-off-by: Sasha Levin commit d493e0bfc748a520c349d6c8791b262aa5ad2e4e Author: Jiasheng Jiang Date: Thu May 28 13:12:21 2026 +0200 RDMA/rxe: Fix double free in rxe_srq_from_init commit 0beefd0e15d962f497aad750b2d5e9c3570b66d1 upstream. In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init() (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this: kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe] rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150 [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. Fixes: aae0484e15f0 ("IB/rxe: avoid srq memory leak") Signed-off-by: Jiasheng Jiang Link: https://patch.msgid.link/20260112015412.29458-1-jiashengjiangcool@gmail.com Reviewed-by: Zhu Yanjun Signed-off-by: Leon Romanovsky [bwh: Backported to 5.15: There was no assignment to init->attr.max_wr here; don't add it] Signed-off-by: Ben Hutchings Signed-off-by: Sasha Levin commit 3bdad903d3dd68c62a25dfb001ec845ba24ef41b Author: Ben Hutchings Date: Thu May 28 13:07:48 2026 +0200 Revert "RDMA/rxe: Fix double free in rxe_srq_from_init" This reverts commit af5956243018918130d52c9f671efdb40bab3366, which was commit 0beefd0e15d962f497aad750b2d5e9c3570b66d1 upstream. The backported version did not move but duplicated the problematic assignment, so it did not fix the bug. A proper backport will follow. Signed-off-by: Ben Hutchings Signed-off-by: Sasha Levin commit 6de0e360032e3224439fba03f2df000247d92816 Author: Jouni Högander Date: Fri May 29 11:03:17 2026 +0300 drm/i915/psr: Apply Intel DPCD workaround when SDP on prior line used commit 4703049f768fc1c1caac754134118bee1a3af189 upstream. There is Intel specific workaround DPCD address containing workaround for case where SDP is on prior line. Apply this workaround according to values in the offset. Fixes: 61e887329e33 ("drm/i915/xelpd: Handle PSR2 SDP indication in the prior scanline") Cc: # v5.15+ Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-4-jouni.hogander@intel.com (cherry picked from commit c3fe899fbeac86ea4a5ca9dd845b2cbc0da46249) Signed-off-by: Tvrtko Ursulin Signed-off-by: Jouni Högander Signed-off-by: Sasha Levin commit 5817d127afa768a0520d66420f404ec43a67b686 Author: Suraj Kandpal Date: Fri May 29 11:03:16 2026 +0300 drm/dp: Add eDP 1.5 bit definition commit 5dfc37a6b77bf6beedbd30d70184b54e1a08ccac upstream. Add the eDP revision bit value for 1.5. Spec: eDPv1.5 Table 16-5 Signed-off-by: Suraj Kandpal Reviewed-by: Arun R Murthy Tested-by: Ben Kao Acked-by: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-2-suraj.kandpal@intel.com Signed-off-by: Jouni Högander Signed-off-by: Sasha Levin commit 032f631f87ade92df12ce6dea678d35720181586 Author: Jouni Högander Date: Fri May 29 11:03:15 2026 +0300 drm/i915/psr: Read Intel DPCD workaround register commit f30bece421a4ae34359254e1dc2a187a42b6af9b upstream. Read Intel DPCD workaround register and store it into intel_connector->dp.psr_caps. psr_caps was chosen as currently it contains only PSR workaround for PSR2 SDP on prior scanline implementation. Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-3-jouni.hogander@intel.com (cherry picked from commit c48ff24d0f4ab7ad696b2d35ad64ce7e049c668c) Signed-off-by: Tvrtko Ursulin Signed-off-by: Sasha Levin commit 65e31290385a6999c30977e5bc214ddf377e5c31 Author: Jouni Högander Date: Fri May 29 11:03:14 2026 +0300 drm/i915/psr: Add defininitions for INTEL_WA_REGISTER_CAPS DPCD register commit fbceb39b536e40c2f7cc47ab42037bb7c2b7ced9 upstream. EDP specification says: "If either VSC SDP is unable to be transmitted 100 ns before the SU region, the Source device may optionally transmit the VSC SDP during the prior video scan line’s HBlank period There is a Intel specific drm dp register currently containing bits related how TCON can support PSR2 with SDP on prior line." Unfortunately many panels are having problems in implementing this. So there is a custom Intel specific DPCD register (INTEL_WA_REGISTER_CAPS) to figure out if this is properly implemented on a panel or if panel doesn't require that 100 ns delay before the SU region. Here are the definitions in this custom DPCD address: 0 = Panel doesn't support SDP on prior line 1 = Panel supports SDP on prior line 2 = Panel doesn't have 100ns requirement 3 = Reserved Add definitions for this new register and it's values into new header intel_dpcd.h. v2: add INTEL_DPCD_ prefix to definitions Bspec: 74741 Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-2-jouni.hogander@intel.com (cherry picked from commit 1da1c9294825f08f622c473480d185680c2a3b75) Signed-off-by: Tvrtko Ursulin Signed-off-by: Sasha Levin commit c75600e69e66a751cc046cd9c407b942f298d852 Author: Duoming Zhou Date: Thu May 28 13:54:31 2026 +0800 wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work [ Upstream commit 9cb83d4be0b9b697eae93d321e0da999f9cdfcfc ] The brcmf_btcoex_detach() only shuts down the btcoex timer, if the flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which runs as timer handler, sets timer_on to false. This creates critical race conditions: 1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc() is executing, it may observe timer_on as false and skip the call to timer_shutdown_sync(). 2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info worker after the cancel_work_sync() has been executed, resulting in use-after-free bugs. The use-after-free bugs occur in two distinct scenarios, depending on the timing of when the brcmf_btcoex_info struct is freed relative to the execution of its worker thread. Scenario 1: Freed before the worker is scheduled The brcmf_btcoex_info is deallocated before the worker is scheduled. A race condition can occur when schedule_work(&bt_local->work) is called after the target memory has been freed. The sequence of events is detailed below: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | kfree(cfg->btcoex); // FREE | | schedule_work(&bt_local->work); // USE Scenario 2: Freed after the worker is scheduled The brcmf_btcoex_info is freed after the worker has been scheduled but before or during its execution. In this case, statements within the brcmf_btcoex_handler() — such as the container_of macro and subsequent dereferences of the brcmf_btcoex_info object will cause a use-after-free access. The following timeline illustrates this scenario: CPU0 | CPU1 brcmf_btcoex_detach | brcmf_btcoex_timerfunc | bt_local->timer_on = false; if (cfg->btcoex->timer_on) | ... | cancel_work_sync(); | ... | schedule_work(); // Reschedule | kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker /* | btci = container_of(....); // USE The kfree() above could | ... also occur at any point | btci-> // USE during the worker's execution| */ | To resolve the race conditions, drop the conditional check and call timer_shutdown_sync() directly. It can deactivate the timer reliably, regardless of its current state. Once stopped, the timer_on state is then set to false. Fixes: 61730d4dfffc ("brcmfmac: support critical protocol API for DHCP") Acked-by: Arend van Spriel Signed-off-by: Duoming Zhou Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Robert Garcia Signed-off-by: Sasha Levin commit 5328b95960774f2e189f22485616bc7b8eb2f7e3 Author: Sven Eckelmann Date: Fri May 29 22:08:08 2026 +0200 batman-adv: bla: avoid double decrement of bla.num_requests commit 83ab69bd12b80f6ea169c8bea6977701b53a043d upstream. The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 9a02c8fc963ddeecb5d8788be0740c1869fc54b7 Author: Sven Eckelmann Date: Fri May 29 22:02:51 2026 +0200 batman-adv: tt: avoid empty VLAN responses commit fa1bd704940b5bcbc32c0b28db9167405c8ee5e0 upstream. The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") [ Context, drop flex array dependency ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 724a8eb4155669797c96b70d70e354284ae3b5a8 Author: Sven Eckelmann Date: Thu May 28 23:04:23 2026 +0200 batman-adv: tt: fix TOCTOU race for reported vlans commit 94d27005016be15ffc638b2ecbc4d58805ad7b48 upstream. The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty. Cc: stable@kernel.org Fixes: 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") [ Context, drop flex array dependency ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 00bf4bb9947b1190a8be8d9b6a1bcbfa3707785c Author: Sven Eckelmann Date: Thu May 28 22:27:23 2026 +0200 batman-adv: tp_meter: directly shut down timer on cleanup commit d5487249a81ea658717614009c8f46acc5b7101a upstream. batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") [ adapt pre-hunk to old del_timer* names ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 32c8d080a12e7650523d3fee9cab9b6341ff23c3 Author: Petr Machata Date: Thu May 28 13:33:11 2026 +0200 selftests: forwarding: lib: Add helpers for checksum handling commit 952e0ee38c7215c45192d8c899acd1830873f28b upstream. In order to generate IGMPv3 and MLDv2 packets on the fly, we will need helpers to calculate the packet checksum. The approach presented in this patch revolves around payload templates for mausezahn. These are mausezahn-like payload strings (01:23:45:...) with possibly one 2-byte sequence replaced with the word PAYLOAD. The main function is payload_template_calc_checksum(), which calculates RFC 1071 checksum of the message. There are further helpers to then convert the checksum to the payload format, and to expand it. For IPv6, MLDv2 message checksum is computed using a pseudoheader that differs from the header used in the payload itself. The fact that the two messages are different means that the checksum needs to be returned as a separate quantity, instead of being expanded in-place in the payload itself. Furthermore, the pseudoheader includes a length of the message. Much like the checksum, this needs to be expanded in mausezahn format. And likewise for number of addresses for (S,G) entries. Thus we have several places where a computed quantity needs to be presented in the payload format. Add a helper u16_to_bytes(), which will be used in all these cases. Signed-off-by: Petr Machata Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: 02cb2e6bacbb ("selftests: forwarding: vxlan_bridge_1d: fix test failure with br_netfilter enabled") [bwh: Backported to 5.15: adjust context] Signed-off-by: Ben Hutchings Signed-off-by: Sasha Levin commit 041329a4d99c14bdc6a75c9eb010b264e8e5f3c6 Author: Sven Eckelmann Date: Fri May 29 22:07:24 2026 +0200 batman-adv: iv: recover OGM scheduling after forward packet error commit aa3153bd139a6c48667dcd02608d3b2c80bff02c upstream. When batadv_iv_ogm_schedule_buff() fails to allocate and queue a forward packet for OGM transmission, the work item that drives periodic OGM scheduling is never re-armed. This silently halts transmission of the node's own OGMs on the affected interface — only OGMs from other peers continue to be aggregated and forwarded. Fix this by tracking whether batadv_iv_ogm_queue_add() (and transitively batadv_iv_ogm_aggregate_new()) successfully scheduled a forward packet. When scheduling fails, batadv_iv_ogm_schedule_buff() falls back to queuing a dedicated recovery work item (reschedule_work) that fires after one originator interval and calls batadv_iv_ogm_schedule() again. Cc: stable@kernel.org Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 1595628a2f877d052eda18865ccf539392c47c04 Author: Sven Eckelmann Date: Fri May 29 22:04:47 2026 +0200 batman-adv: tvlv: reject oversized TVLV packets commit f50487e3566358b2b982b7801945e858c78ad9ab upstream. batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 53cb3511f6eda37d3bd923545fdba6013b6d7bb7 Author: Sven Eckelmann Date: Fri May 29 22:08:49 2026 +0200 batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface commit f80d3d98d2ff78d9e2fe5d68b1f45948c4f7bd24 upstream. Without rtnl_lock held, a hardif might be retrieved as primary interface of a meshif, but then (while operating on this interface) getting decoupled from the mesh interface. In this case, the meshif still exists but the pointer from the primary hardif to the meshif is set to NULL. The mesh_iface must be checked first to be non-NULL before continuing to send an ARP request using meshif. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Reported-by: Ido Schimmel Reported-by: syzbot+9fdcc9f05a98a540b816@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9fdcc9f05a98a540b816 [ switch to old "mesh_iface" name "soft_iface" ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 03d222b1214f4b6a7353bf1aa529bf2f3561bf63 Author: Sven Eckelmann Date: Thu May 28 21:53:56 2026 +0200 batman-adv: tvlv: abort OGM send on tvlv append failure commit 501368506563e151b322c8c3f228b796e615b90d upstream. batadv_tvlv_container_ogm_append() could fail in two ways: a memory allocation failure when resizing the packet buffer, or the tvlv data exceeding U16_MAX bytes. In both cases the function previously returned the old (now stale) tvlv_value_len rather than signalling an error, causing the OGM/OGM2 send path to transmit a packet whose TVLV length field no longer matched the actual buffer contents. And because it also didn't fill in the new TVLV data, sending either uninitialized or corrupted data on the wire. All errors in batadv_tvlv_container_ogm_append() must be forwarded to the caller. And the caller must abort the send of the OGM2. For B.A.T.M.A.N. IV, it is currently not allowed to abort the send. The non-TVLV part of the OGM must be queued up instead. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 70c9f6ab0d8f785087fb74fb85464a9a5288bfdb Author: Sven Eckelmann Date: Thu May 28 21:34:43 2026 +0200 batman-adv: v: stop OGMv2 on disabled interface commit f8ce8b8331a1bc44ad4905886a482214d428b253 upstream. When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called. Cc: stable@kernel.org Fixes: 0da0035942d4 ("batman-adv: OGMv2 - add basic infrastructure") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan [ switch to old "mesh_iface" name "soft_iface" ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit bcfeac79af740735ace44008b4a11b8e5add20f5 Author: Zhenghang Xiao Date: Wed May 27 11:24:11 2026 +0800 sctp: fix race between sctp_wait_for_connect and peeloff [ Upstream commit f14fe6395a8b3d961a61e138ad7b36ba3626dd4e ] sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept. Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Signed-off-by: Zhenghang Xiao Acked-by: Xin Long Link: https://patch.msgid.link/20260527032411.60959-1-kipreyyy@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7c3f72eba2abf40fe9eea46e7d5218d06da8f8d8 Author: Marco Scardovi Date: Tue May 26 19:02:45 2026 +0200 gpio: rockchip: convert bank->clk to devm_clk_get_enabled() [ Upstream commit 3e46c18d5d87f063a93ae0fe7662fbf6660459d5 ] The bank->clk was previously obtained via of_clk_get() and manually prepared/enabled. However, it was missing a corresponding clk_put() in both the error paths and the remove function, leading to a reference leak. Convert the allocation to devm_clk_get_enabled(), which also properly propagates failures from clk_prepare_enable() that were previously ignored. The GPIO bank device uses the same OF node as the previous of_clk_get() call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same clock provider entry. Fix the reference leak and simplify the code by removing the manual clk_disable_unprepare() calls in the probe error paths and in the remove function. Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit ecfed1e0d8efecad6737a0d83e21d2fd021d8c48 Author: Luiz Augusto von Dentz Date: Mon May 11 12:09:42 2026 -0400 Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp [ Upstream commit 41c2713b204e6cb6a94587bc6bf6935107df5479 ] If dcid is received for an already-assigned destination CID the spec requires that both channels to be discarded, but calling l2cap_chan_del may invalidate the tmp cursor created by list_for_each_entry_safe and in fact it is the wrong procedure as the chan->dcid may be assigned previously it really needs to be disconnected. Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so instead schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit ae0152d77d101c920769934fb102b18de0c6f526 Author: Zhenghang Xiao Date: Tue May 26 18:51:52 2026 +0800 Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success [ Upstream commit 00e1950716c6ed67d74777b2db286b0fa23b4be9 ] l2cap_ecred_reconf_rsp() returns early on success without clearing chan->ident. Every other L2CAP response handler (l2cap_ecred_conn_rsp, l2cap_le_connect_rsp, l2cap_config_rsp) clears chan->ident after a successful transaction to prevent the channel from matching subsequent responses with the recycled ident value. A remote attacker that completed a reconfiguration as the peer can replay a failure response with the stale ident, causing the kernel to match and destroy the already-established channel via l2cap_chan_del(chan, ECONNRESET). Clear chan->ident for all matching channels on success, and harden the failure path by using l2cap_chan_hold_unless_zero() consistent with other L2CAP handlers (l2cap_le_command_rej, __l2cap_get_chan_by_ident). Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Zhenghang Xiao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit fd238c51b0fa5390cceca9f1ac5a9ffda8063eed Author: Rahul Chandelkar Date: Mon May 25 21:10:31 2026 +0530 ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress() [ Upstream commit 9d5e7a46a9f6d8f503b41bfefef70659845f1679 ] ipv6_rpl_srh_decompress() computes: outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3); hdrlen is __u8. For n >= 127 the result exceeds 255 and silently truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16): (128 * 16) >> 3 = 256, truncated to 0 as __u8 The caller in ipv6_rpl_srh_rcv() then places the compressed header at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8, but the decompressed region occupies buf[0..2055] (8-byte header plus 128 full addresses). The compressed header overlaps the decompressed data, and ipv6_rpl_srh_compress() writes into this overlap, corrupting the routing header of the forwarded packet. The existing guard at exthdrs.c:546 checks (n + 1) > 255, which prevents n+1 from overflowing unsigned char (the segments_left field), but does not prevent the computed hdrlen from overflowing __u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not fit. Tighten the bound to (n + 1) > 127. This caps n at 126, giving hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly past the decompressed region (buf[0..2039]). No overlap. 127 segments is well beyond any realistic RPL deployment. Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Signed-off-by: Rahul Chandelkar Link: https://patch.msgid.link/20260525154031.2290876-1-rc@rexion.ai Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0e182689831277faf2ef683573a60474c208f690 Author: Jakub Kicinski Date: Tue May 26 08:35:33 2026 -0700 ethtool: eeprom: add more safeties to EEPROM Netlink fallback [ Upstream commit 67cfdd9210b99f260b3e0afeb9525e0acc7be31e ] The Netlink fallback path for reading module EEPROM (fallback_set_params()) validates that offset < eeprom_len, but does not check that offset + length stays within eeprom_len. The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has always enforced both bounds: if (eeprom.offset + eeprom.len > total_len) return -EINVAL; This could lead to surprises in both drivers and device FW. Add the missing offset + length validation to fallback_set_params(), mirroring the ioctl. Similarly - ethtool core in general, and ethtool_get_any_eeprom() in particular tries to zero-init all buffers passed to the drivers to avoid any extra work of zeroing things out. eeprom_fallback() uses a plain kmalloc(), change it to zalloc. Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Reviewed-by: Maxime Chevallier Link: https://patch.msgid.link/20260526153533.2779187-11-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 69b78b5f3033272e53a2dc2dad675962654a5b38 Author: Oliver Hartkopp Date: Tue May 26 21:33:19 2026 +0200 bonding: refuse to enslave CAN devices [ Upstream commit 8ba68464e4787b6a7ec938826e16124df20fd23d ] syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. Fixes: cd05acfe65ed ("[CAN]: Allocate protocol numbers for PF_CAN") Reported-by: syzbot+8ed98cbd0161632bce95@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8ed98cbd0161632bce95 Signed-off-by: Oliver Hartkopp Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20260526-bonding-candev-v1-1-ba1df400918a@hartkopp.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9903a04becf059e44cccf625e23689b7d4378384 Author: Zhao Dongdong Date: Tue May 26 11:21:39 2026 +0800 Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() [ Upstream commit 3c40d381ce04f9575a5d8b542898183c3b4b38dc ] The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. Fixes: 18722c247023 ("Bluetooth: Enable 6LoWPAN support for BT LE devices") Signed-off-by: Zhao Dongdong Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 6fb653b62f169f6050fac45b56bf21ad097e19f6 Author: Cássio Gabriel Date: Wed May 27 09:24:00 2026 -0300 ASoC: codecs: simple-mux: Fix enum control bounds check [ Upstream commit f63ad68e18d774a5d15cd7e405ead63f6b322679 ] simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. Fixes: 342fbb7578d1 ("ASoC: add simple-mux") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit c7b7ec3e69e673c0d6b57f74d21da50c485c598e Author: Eric Dumazet Date: Fri May 22 11:55:12 2026 +0000 tunnels: do not assume transport header in iptunnel_pmtud_check_icmp() [ Upstream commit 509323077ef79a26ba0c60bb556e45c12c398b2d ] In some cases, iptunnel_pmtud_check_icmp() can be called while skb transport header is not set. This triggers an out-of-bound access, because (typeof(skb->transport_header))~0U is 65535. Access the icmp header based on IPv4 network header, after making sure icmp->type is present in skb linear part. Note that iptunnel_pmtud_check_icmpv6()) is fine. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Reported-by: Damiano Melotti Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260522115512.1519110-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9257f56ac47ef1976bcd056cf986a9988eeec67a Author: Eric Dumazet Date: Mon May 25 20:36:42 2026 +0000 vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu() [ Upstream commit 7d9ef0cb271555d8cf39fefe6c981e1493b25ecf ] skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Eric Dumazet Reviewed-by: Stefano Brivio Link: https://patch.msgid.link/20260525203642.2389723-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7254aef4d1a7e18e887af9010e2f2dc34806789b Author: Eric Dumazet Date: Mon May 25 20:13:35 2026 +0000 tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]() [ Upstream commit b4bc94353050b1fa7b702bd4c6600710dd926cff ] Sashiko found that iptunnel_pmtud_build_icmp() and iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr() before an skb_cow() call which can reallocate skb->head. Fix this possible UAF by initializing the local variables after the skb_cow() call. Remove skb_reset_network_header() calls which were not needed. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Eric Dumazet Reviewed-by: Stefano Brivio Link: https://patch.msgid.link/20260525201335.2361845-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a053ac3eb2f4d63fc9f78ac493fc6f3c5304930a Author: Cássio Gabriel Date: Tue May 19 13:51:47 2026 -0300 ASoC: Intel: bytcht_es8316: Fix MCLK leak on init errors [ Upstream commit afb2a3a9d8369d18122a0d7cd294eba9a98259c6 ] byt_cht_es8316_init() enables MCLK before configuring the codec sysclk and creating the headset jack. If either of those later steps fails, the function returns without disabling MCLK, leaving the clock enabled after card registration fails. Track whether this driver enabled MCLK and disable it on the init error paths. Add the matching DAI link exit callback so the same clock enable is also balanced when ASoC cleans up a successfully initialized link. Fixes: a03bdaa565cb ("ASoC: Intel: add machine driver for BYT/CHT + ES8316") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260519-asoc-bytcht-es8316-mclk-leak-v1-1-b4a11cdc2afd@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit a0ffc6081a8b27082dd5eae5aa1e3f59bbecf06c Author: Eric Dumazet Date: Thu May 21 12:21:47 2026 +0000 ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() [ Upstream commit 87a1e0fe7776da7ab411be332b4be58ac8840d10 ] ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. Fixes: 122ff243f5f1 ("ipv4: make ip_local_reserved_ports per netns") Reported-by: Ji'an Zhou Signed-off-by: Eric Dumazet Cc: Cong Wang Reviewed-by: Jason Xing Reviewed-by: Jiayuan Chen Link: https://patch.msgid.link/20260521122147.3584624-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 45bb8de8c95d8899f4b8f61bd9bceb8132af73cb Author: Breno Leitao Date: Thu May 21 07:11:45 2026 -0700 net/iucv: fix locking in .getsockopt [ Upstream commit 3589d20a666caf30ad100c960a2de7de390fce88 ] Mirror iucv_sock_setsockopt() and wrap the whole switch in lock_sock()/release_sock(). The pre-existing SO_MSGLIMIT-only lock becomes redundant and is removed. Any AF_IUCV HIPER user can potentially crash the kernel by racing recvmsg() with getsockopt(SO_MSGSIZE): the SO_MSGSIZE arm dereferences iucv->hs_dev->mtu after iucv_sock_close() (called from the racing recvmsg()) has set hs_dev to NULL, producing a NULL pointer dereference oops. Suggested-by: Stanislav Fomichev Fixes: 51363b8751a6 ("af_iucv: allow retrieval of maximum message size") Signed-off-by: Breno Leitao Reviewed-by: Alexandra Winter Tested-by: Alexandra Winter Link: https://patch.msgid.link/20260521-af_iucv_fix2-v1-1-f16b1c510aa9@debian.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2006605006e5a4a11d93e1ebdbbe95764d24276f Author: Alexandra Winter Date: Thu May 21 16:56:39 2026 +0200 net/smc: Do not re-initialize smc hashtables [ Upstream commit 9e4389b0038781f19f97895186ed941ff8ac1678 ] INIT_HLIST_HEAD(&smc_v*_hashinfo.ht) are called after smc_nl_init(), proto_register() and sock_register(). This can lead to smc_v*_hashinfo.ht being reset even though hash entries already exist and are being used, possibly resulting in a corrupted list. Remove unnecessary and dangerous re-initialisation of smc_v*_hashinfo.ht in smc_init(); it is implicitly initialised to zero anyhow. Add HLIST_HEAD_INIT to the definitions for clarity. Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets") Suggested-by: Halil Pasic Signed-off-by: Alexandra Winter Acked-by: Halil Pasic Reviewed-by: Mahanta Jambigi Link: https://patch.msgid.link/20260521145639.10317-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 03f374ac125d3d2d6cdf993d5cd00a4e6eb53c55 Author: Ilya Maximets Date: Wed May 20 19:22:36 2026 +0200 net: netlink: don't set nsid on local notifications [ Upstream commit 88b126b39f9757e9debc322d4679239e9af089c7 ] In most cases, notifications on sockets with NETLINK_LISTEN_ALL_NSID do not contain NSID in their ancillary data in case the event is local to the listener. However, when a self-referential NSID is allocated for a namespace, every local notification starts sending this ID to the user space. This is problematic, because the listener cannot tell if those notifications are local or not anymore without making extra requests to figure out if the provided NSID is local or not. The listener can also not figure out the local NSID beforehand as it can be allocated at any point in time by other processes, changing the structure of the future notifications for everyone. The value is practically not useful, since it's the namespace's own ID that the application has to obtain from other sources in order to figure out if it's the same or not. So, for the application it's just an extra busy work with no benefits. Moreover, applications that do not know about this quirk may be mishandling notifications with NSID set as notifications from remote namespaces. This is the case for ovs-vswitchd and the iproute2's 'ip monitor' that stops printing 'current' and starts printing the nsid number mid-session. Lack of clear documentation for this behavior is also not helping. A search though open-source projects doesn't reveal any projects that use NETNSA_NSID_NOT_ASSIGNED and rely on metadata to contain self-referential NSIDs (expected, since the value is not useful). Quite the opposite, as already mentioned, there are few applications that rely on NSID to not be present in local events. Since the value is not useful and actively harmful in some cases, let's not report it for local events, making the notifications more consistent. Also adding some blank lines for readability. Fixes: 59324cf35aba ("netlink: allow to listen "all" netns") Reported-by: Matteo Perin Signed-off-by: Ilya Maximets Acked-by: Nicolas Dichtel Link: https://patch.msgid.link/20260520172317.175168-3-i.maximets@ovn.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d5bc7c9130e6ae5556600ec432234dafd26d5c82 Author: Ilya Maximets Date: Wed May 20 19:22:35 2026 +0200 net: netlink: fix sending unassigned nsid after assigned one [ Upstream commit 70f8592ee90585272018a725054b6eb2ab7e99ca ] If the current skb is not shared, it is re-used directly for all the sockets subscribed to the notification. If we have remote all-nsid socket receiving a message first, then the 'nsid_is_set' will be set to 'true'. If the nsid is NOT_ASSIGNED for the next socket in the list, the 'nsid_is_set' will remain 'true' and the negative value is be delivered to the user space. All subsequent nsid values will be delivered as well, since there is no code path that sets the flag back to 'false'. Fix that by always dropping the flag to 'false' first. Fixes: 7212462fa6fd ("netlink: don't send unknown nsid") Signed-off-by: Ilya Maximets Acked-by: Nicolas Dichtel Link: https://patch.msgid.link/20260520172317.175168-2-i.maximets@ovn.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0e8211fcf9426f5adddf32516ba0f400ceb9544d Author: Weiming Shi Date: Wed May 20 09:00:21 2026 -0700 tun: free page on short-frame rejection in tun_xdp_one() [ Upstream commit f4feb1e20058e407cb00f45aff47f5b7e19a6bbf ] tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without freeing the page that vhost_net_build_xdp() allocated for it. tun_sendmsg() discards that -EINVAL and still returns total_len, so vhost_tx_batch() takes the success path and never frees the page; each short frame in a batch leaks one page-frag chunk. A local process that can open /dev/net/tun and /dev/vhost-net can hit this path: it attaches a tun/tap device as the vhost-net backend and feeds TX descriptors whose length minus the virtio-net header is below ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a tight submission loop exhausts host memory and triggers an OOM panic. Free the page before returning -EINVAL, matching the XDP-program error path in the same function. Fixes: 049584807f1d ("tun: add missing verification for short frame") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Dongli Zhang Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260520160020.375349-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 21af4c030567d2e6c89bb927bc18b51fba52a400 Author: Florian Westphal Date: Tue May 19 22:52:07 2026 +0200 netfilter: ebtables: fix OOB read in compat_mtw_from_user [ Upstream commit f438d1786d657d57790c5d138d6db3fc9fdac392 ] Luxiao Xu says: The function compat_mtw_from_user() converts ebtables extensions from 32-bit user structures to kernel native structures. However, it lacks proper validation of the user-supplied match_size/target_size. When certain extensions are processed, the kernel-side translation logic may perform memory accesses based on the extension's expected size. If the user provides a size smaller than what the extension requires, it results in an out-of-bounds read as reported by KASAN. This fix introduces a check to ensure match_size is at least as large as the extension's required compatsize. This covers matches, watchers, and targets, while maintaining compatibility with standard targets. AFAIU this is relevant for matches that need to go though match->compat_from_user() call. Those that use plain memcpy with the user-provided size are ok because the caller checks that size vs the start of the next rule entry offset (which itself is checked vs. total size copied from userspace). The ->compat_from_user() callbacks assume they can read compatsize bytes, so they need this extra check. Based on an earlier patch from Luxiao Xu. Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 516a758b58242c7a6a954ef1a7a32bd9c328d327 Author: Florian Westphal Date: Tue May 19 20:10:08 2026 +0200 netfilter: xt_cpu: prefer raw_smp_processor_id [ Upstream commit c376f07e16c02239ed44cabb97145d03f65b4d15 ] With PREEMPT_RCU we get splat: BUG: using smp_processor_id() in preemptible [..] caller is cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37 CPU: 1 .. Comm: syz.3.1377 #0 PREEMPT(full) Call Trace: dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 check_preemption_disabled+0xd3/0xe0 lib/smp_processor_id.c:47 cpu_mt+0x53/0xd0 net/netfilter/xt_cpu.c:37 [..] Just use raw version instead. This is similar to 14d14a5d2957 ("netfilter: nft_meta: use raw_smp_processor_id()"). Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by: syzbot+690d3e3ffa7335ac10eb@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit d3019c61799adc21811af4b521f11f3dc77f8e04 Author: Chris Mason Date: Tue May 19 12:36:14 2026 -0700 netfilter: synproxy: refresh tcphdr after skb_ensure_writable [ Upstream commit 92170e6afe927ab2792a3f71902845789c8e31b1 ] synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy leaving the on-wire checksum stale */ The option bytes are written through skb->data and are fine; only the checksum update goes through th and so lands in the wrong place. The result is either a write into freed slab memory or a packet leaving with a checksum that does not match its payload. Fix by re-deriving th from skb->data + protoff immediately after skb_ensure_writable() succeeds, so the subsequent checksum update targets the linear, writable header. Fixes: 48b1de4c110a ("netfilter: add SYNPROXY core/target") Assisted-by: kres (claude-opus-4-7) Signed-off-by: Chris Mason Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 4ba8858f57993f6c2edf417813feba08160f2301 Author: Carl Lee Date: Sat May 16 19:55:18 2026 +0800 nfc: nxp-nci: i2c: use rising-edge IRQ on ACPI systems [ Upstream commit f23bf992d65a42007c517b060ca35cebdea3525a ] Some ACPI-based platforms report incorrect IRQ trigger types (e.g. IRQF_TRIGGER_HIGH), which can lead to interrupt storms. Use the historically working rising-edge trigger on ACPI systems to avoid this regression. Device Tree-based systems continue to use the firmware-provided trigger type. Fixes: 57be33f85e36 ("nfc: nxp-nci: remove interrupt trigger type") Signed-off-by: Carl Lee Tested-by: Bartosz Golaszewski Reviewed-by: Bartosz Golaszewski Reviewed-by: Mark Pearson Tested-by: Mark Pearson Tested-by: Luca Stefani Link: https://patch.msgid.link/20260516-nfc-nxp-nci-i2c-restore-irq-trigger-fallback-v3-1-37ba4b6e9086@amd.com Signed-off-by: David Heidelberg Signed-off-by: Sasha Levin commit 1021d2877b689a648b27815c854557a917122e93 Author: David Ahern Date: Wed May 13 10:49:14 2026 -0600 xfrm: Check for underflow in xfrm_state_mtu [ Upstream commit 742b04d0550b0ec89dcbc99537ec88653bd1ad90 ] Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH. Fixes: c5c252389374 ("[XFRM]: Optimize MTU calculation") Reported-by: Leo Lin Assisted-by: Codex:26.506.31004 Signed-off-by: David Ahern Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin commit bd08bb7443c501d2f2a71d529e4afcf11c9b07d2 Author: Lee Jones Date: Wed Apr 29 13:40:42 2026 +0000 nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc() [ Upstream commit b493ea2765cc17cb8aa7e7544a4b6dcb05b6ed77 ] A race condition exists in the NFC LLCP connection state machine where the connection acceptance packet (CC) can be processed concurrently with socket release. This can lead to a use-after-free of the socket object. When nfc_llcp_recv_cc() moves the socket from the connecting_sockets list to the sockets list, it does so without holding the socket lock. If llcp_sock_release() is executing concurrently, it might have already unlinked the socket and dropped its references, which can result in nfc_llcp_recv_cc() linking a freed socket into the live list. Fix this by holding lock_sock() during the state transition and list movement in nfc_llcp_recv_cc(). After acquiring the lock, check if the socket is still hashed to ensure it hasn't already been unlinked and marked for destruction by the release path. This aligns the locking pattern with recv_hdlc() and recv_disc(). Fixes: a69f32af86e3 ("NFC: Socket linked list") Signed-off-by: Lee Jones Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260429134115.3558604-2-lee@kernel.org Signed-off-by: David Heidelberg Signed-off-by: Sasha Levin commit fb29f6bbe433f3decad227588809636c25f2a287 Author: Lee Jones Date: Wed Apr 29 13:40:41 2026 +0000 nfc: llcp: Fix use-after-free in llcp_sock_release() [ Upstream commit f4268b466190dae95a7585f69b4f1f8ad097632c ] llcp_sock_release() unconditionally unlinks the socket from the local sockets list. However, if the socket is still in connecting state, it is on the connecting list. Fix this by checking the socket state and unlinking from the correct list. Fixes: b4011239a08e ("NFC: llcp: Fix non blocking sockets connections") Signed-off-by: Lee Jones Link: https://patch.msgid.link/20260429134115.3558604-1-lee@kernel.org Signed-off-by: David Heidelberg Signed-off-by: Sasha Levin commit d31a12cee10bbc12b4b523a4709fd1fdee8b7d0f Author: Kevin Hao Date: Mon Jun 1 15:38:11 2026 +0800 net: cpsw_new: Fix potential unregister of netdev that has not been registered yet [ Upstream commit 9d724b34fbe13b71865ad0906a4be97571f19cf5 ] If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Kevin Hao Cc: stable@vger.kernel.org Reviewed-by: Alexander Sverdlin Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-2-6e58bae6b299@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Wenshan Lan Signed-off-by: Sasha Levin commit 70ae35be58d476e2fd9f7a941a5e03b2f5fadb8d Author: Vinicius Costa Gomes Date: Mon Jun 1 13:24:12 2026 +0800 dmaengine: idxd: Fix not releasing workqueue on .release() [ Upstream commit 3d33de353b1ff9023d5ec73b9becf80ea87af695 ] The workqueue associated with an DSA/IAA device is not released when the object is freed. Fixes: 47c16ac27d4c ("dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime") Reviewed-by: Dave Jiang Signed-off-by: Vinicius Costa Gomes Link: https://patch.msgid.link/20260121-idxd-fix-flr-on-kernel-queues-v3-v3-7-7ed70658a9d1@intel.com Signed-off-by: Vinod Koul [ Remove destroy_workqueue(idxd->wq) from the function idxd_remove() to avoid the workqueue is released twice. ] Signed-off-by: Wenshan Lan Signed-off-by: Sasha Levin commit 0042675c70a2b22b1ea3bb21b34bcaa505716296 Author: Carlos Eduardo Gallo Filho Date: Tue Sep 26 11:15:18 2023 -0300 drm: Remove plane hsub/vsub alignment requirement for core helpers [ Upstream commit f2f455981a34ce8ca88a41458c09494b387d344f ] The drm_format_info_plane_{height,width} functions was implemented using regular division for the plane size calculation, which cause issues [1][2] when used on contexts where the dimensions are misaligned with relation to the subsampling factors. So, replace the regular division by the DIV_ROUND_UP macro. This allows these functions to be used in more drivers, making further work to bring more core presence on them possible. [1] http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-3-ville.syrjala@linux.intel.com [2] https://patchwork.freedesktop.org/patch/msgid/20211026225105.2783797-2-imre.deak@intel.com Signed-off-by: Carlos Eduardo Gallo Filho Reviewed-by: André Almeida Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20230926141519.9315-2-gcarlos@disroot.org Signed-off-by: Sasha Levin commit 1e70274d3b81de28973bcdbce40a512bcb181ff9 Author: Victor Nogueria Date: Thu Apr 30 11:29:56 2026 -0400 net/sched: sch_sfb: Replace direct dequeue call with peek and qdisc_dequeue_peeked [ Upstream commit 1b9bc71153b01dbde8045b9edede4240f4f5520e ] When sfb has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (sfb in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(sfb) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (sfb). And herein lies the problem. - sfb will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 127.594489][ T453] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 127.594741][ T453] CPU: 2 UID: 0 PID: 453 Comm: ping Not tainted 7.1.0-rc1-00035-gac961974495b-dirty #793 PREEMPT(full) [ 127.595059][ T453] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 127.595254][ T453] RIP: 0010:qfq_dequeue+0x35c/0x1650 [sch_qfq] [ 127.595461][ T453] Code: 00 fc ff df 80 3c 02 00 0f 85 17 0e 00 00 4c 8d 73 48 48 89 9d b8 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 76 0c 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b [ 127.596081][ T453] RSP: 0018:ffff88810e5af440 EFLAGS: 00010216 [ 127.596337][ T453] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: dffffc0000000000 [ 127.596623][ T453] RDX: 0000000000000009 RSI: 0000001880000000 RDI: ffff888104fd82b0 [ 127.596917][ T453] RBP: ffff888104fd8000 R08: ffff888104fd8280 R09: 1ffff110211893a3 [ 127.597165][ T453] R10: 1ffff110211893a6 R11: 1ffff110211893a7 R12: 0000001880000000 [ 127.597404][ T453] R13: ffff888104fd82b8 R14: 0000000000000048 R15: 0000000040000000 [ 127.597644][ T453] FS: 00007fc380cbfc40(0000) GS:ffff88816f2a8000(0000) knlGS:0000000000000000 [ 127.597956][ T453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 127.598160][ T453] CR2: 00005610aa9890a8 CR3: 000000010369e000 CR4: 0000000000750ef0 [ 127.598390][ T453] PKRU: 55555554 [ 127.598509][ T453] Call Trace: [ 127.598629][ T453] [ 127.598718][ T453] ? mark_held_locks+0x40/0x70 [ 127.598890][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599053][ T453] sfb_dequeue+0x88/0x4d0 [ 127.599174][ T453] ? ktime_get+0x137/0x230 [ 127.599328][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599480][ T453] ? qdisc_peek_dequeued+0x7b/0x350 [sch_qfq] [ 127.599670][ T453] ? srso_alias_return_thunk+0x5/0xfbef5 [ 127.599831][ T453] tbf_dequeue+0x6b1/0x1098 [sch_tbf] [ 127.599988][ T453] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead. Fixes: e13e02a3c68d ("net_sched: SFB flow scheduler") Signed-off-by: Victor Nogueria Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260430152957.194015-3-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit b37da3ac099e145bcd3be82c745a8d335772e3af Author: Jeremy Kerr Date: Tue Jun 2 15:50:14 2026 +0800 net: mctp: ensure our nlmsg responses are initialised [ Upstream commit a6a9bc544b675d8b5180f2718ec985ad267b5cbf ] Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages. Fixes: 831119f88781 ("mctp: Add neighbour netlink interface") Fixes: 06d2f4c583a7 ("mctp: Add netlink route management") Fixes: 583be982d934 ("mctp: Add device handling and netlink interface") Signed-off-by: Jeremy Kerr Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260209-dev-mctp-nlmsg-v1-1-f1e30c346a43@codeconstruct.com.au Signed-off-by: Jakub Kicinski Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Sasha Levin commit c205da704c84eeb4247d770150440294fd547049 Author: Davide Caratti Date: Wed Apr 8 17:24:36 2026 +0200 net/sched: cls_fw: fix NULL dereference of "old" filters before change() [ Upstream commit 65782b2db7321d5f97c16718c4c7f6c7205a56be ] Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 irq event stamp: 1045778 hardirqs last enabled at (1045784): [] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/20260331050217.504278-1-xmei5%40asu.edu [2] https://elixir.bootlin.com/linux/v7.0-rc6/source/include/net/pkt_cls.h#L86 Fixes: faeea8bbf6e9 ("net/sched: cls_fw: fix NULL pointer dereference on shared blocks") Fixes: ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") Acked-by: Jamal Hadi Salim Signed-off-by: Davide Caratti Link: https://patch.msgid.link/e39cbd3103a337f1e515d186fe697b4459d24757.1775661704.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e7cdcb266ba06d8480809b78ab8bb2bf8ff51ccb Author: Greg Kroah-Hartman Date: Mon Apr 20 18:00:27 2026 +0200 Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size commit 2905281cbda52ec9df540113b35b835feb5fafd3 upstream. nexio_read_data() pulls data_len and x_len from a packed __be16 header in the device's interrupt packet and then walks packet->data[0..x_len) and packet->data[x_len..data_len) comparing each byte against a threshold. Both fields are 16-bit on the wire (max 65535). The existing adjustments shave at most 0x100 / 0x80 off, so the loop bound can still reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size (1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the packed header — so packet->data[] has 1017 valid bytes. read_data() callbacks are not given urb->actual_length, and nothing else bounds the walk. A device that lies about its length can get a ~64 KiB out-of-bounds read past the coherent DMA allocation. The first index whose byte exceeds NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the reported touch coordinates, so adjacent kernel memory contents leak to userspace as ABS_X / ABS_Y events. Far enough out, the read can also hit an unmapped page and fault. Fix this all by clamping data_len to the buffer's data[] capacity and x_len to data_len. Cc: Dmitry Torokhov Fixes: 5197424cdccc ("Input: usbtouchscreen - add NEXIO (or iNexio) support") Cc: stable Assisted-by: gkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman