commit 02e21884dcf2f1746ab686a6ea41a0a92520fe58 Author: Greg Kroah-Hartman Date: Tue Oct 10 21:59:09 2023 +0200 Linux 5.15.135 Link: https://lore.kernel.org/r/20231009130111.200710898@linuxfoundation.org Tested-by: SeongJae Park Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Harshit Mogalapalli Tested-by: Allen Pais Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit c8af81a9d36e0d2e5f198eaceb38a743d834dfe2 Author: Juergen Gross Date: Mon Aug 28 08:09:47 2023 +0200 xen/events: replace evtchn_rwlock with RCU commit 87797fad6cce28ec9be3c13f031776ff4f104cfc upstream. In unprivileged Xen guests event handling can cause a deadlock with Xen console handling. The evtchn_rwlock and the hvc_lock are taken in opposite sequence in __hvc_poll() and in Xen console IRQ handling. Normally this is no problem, as the evtchn_rwlock is taken as a reader in both paths, but as soon as an event channel is being closed, the lock will be taken as a writer, which will cause read_lock() to block: CPU0 CPU1 CPU2 (IRQ handling) (__hvc_poll()) (closing event channel) read_lock(evtchn_rwlock) spin_lock(hvc_lock) write_lock(evtchn_rwlock) [blocks] spin_lock(hvc_lock) [blocks] read_lock(evtchn_rwlock) [blocks due to writer waiting, and not in_interrupt()] This issue can be avoided by replacing evtchn_rwlock with RCU in xen_free_irq(). Note that RCU is used only to delay freeing of the irq_info memory. There is no RCU based dereferencing or replacement of pointers involved. In order to avoid potential races between removing the irq_info reference and handling of interrupts, set the irq_info pointer to NULL only when freeing its memory. The IRQ itself must be freed at that time, too, as otherwise the same IRQ number could be allocated again before handling of the old instance would have been finished. This is XSA-441 / CVE-2023-34324. Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Juergen Gross Reviewed-by: Julien Grall Signed-off-by: Greg Kroah-Hartman commit c346494ec7f14a2cc18373c55b93021bc96fb392 Author: John David Anglin Date: Tue Sep 19 17:51:40 2023 +0000 parisc: Restore __ldcw_align for PA-RISC 2.0 processors commit 914988e099fc658436fbd7b8f240160c352b6552 upstream. Back in 2005, Kyle McMartin removed the 16-byte alignment for ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke spinlocks on pre PA8800 processors. The main symptom was random faults in mmap'd memory (e.g., gcc compilations, etc). Unfortunately, the errata for this ldcw change is lost. The issue is the 16-byte alignment required for ldcw semaphore instructions can only be reduced to natural alignment when the ldcw operation can be handled coherently in cache. Only PA8800 and PA8900 processors actually support doing the operation in cache. Aligning the spinlock dynamically adds two integer instructions to each spinlock. Tested on rp3440, c8000 and a500. Signed-off-by: John David Anglin Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/ Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 694e13732e830cbbfedb562e57f28644927c33fd Author: luosili Date: Wed Oct 4 18:29:36 2023 +0900 ksmbd: fix uaf in smb20_oplock_break_ack commit c69813471a1ec081a0b9bf0c6bd7e8afd818afce upstream. drop reference after use opinfo. Signed-off-by: luosili Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit e914c3a47e458b0de6adea64ffa69069717feb2e Author: Shay Drory Date: Wed Sep 20 13:01:56 2023 +0300 RDMA/mlx5: Fix NULL string error commit dab994bcc609a172bfdab15a0d4cb7e50e8b5458 upstream. checkpath is complaining about NULL string, change it to 'Unknown'. Fixes: 37aa5c36aa70 ("IB/mlx5: Add UARs write-combining and non-cached mapping") Signed-off-by: Shay Drory Link: https://lore.kernel.org/r/8638e5c14fadbde5fa9961874feae917073af920.1695203958.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 81b7bf367eea795d259d0261710c6a89f548844d Author: Bernard Metzler Date: Tue Sep 5 16:58:22 2023 +0200 RDMA/siw: Fix connection failure handling commit 53a3f777049771496f791504e7dc8ef017cba590 upstream. In case immediate MPA request processing fails, the newly created endpoint unlinks the listening endpoint and is ready to be dropped. This special case was not handled correctly by the code handling the later TCP socket close, causing a NULL dereference crash in siw_cm_work_handler() when dereferencing a NULL listener. We now also cancel the useless MPA timeout, if immediate MPA request processing fails. This patch furthermore simplifies MPA processing in general: Scheduling a useless TCP socket read in sk_data_ready() upcall is now surpressed, if the socket is already moved out of TCP_ESTABLISHED state. Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Signed-off-by: Bernard Metzler Link: https://lore.kernel.org/r/20230905145822.446263-1-bmt@zurich.ibm.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 5d8bd138204fba6b7b5e5b7b783d111ec4cb62fa Author: Konstantin Meskhidze Date: Tue Sep 5 18:32:58 2023 +0800 RDMA/uverbs: Fix typo of sizeof argument commit c489800e0d48097fc6afebd862c6afa039110a36 upstream. Since size of 'hdr' pointer and '*hdr' structure is equal on 64-bit machines issue probably didn't cause any wrong behavior. But anyway, fixing of typo is required. Fixes: da0f60df7bd5 ("RDMA/uverbs: Prohibit write() calls with too small buffers") Co-developed-by: Ivanov Mikhail Signed-off-by: Ivanov Mikhail Signed-off-by: Konstantin Meskhidze Link: https://lore.kernel.org/r/20230905103258.1738246-1-konstantin.meskhidze@huawei.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 60c9ed88526dc3062d87305b5659dfc5be6292c8 Author: Leon Romanovsky Date: Mon Sep 11 15:18:06 2023 +0300 RDMA/cma: Fix truncation compilation warning in make_cma_ports commit 18126c767658ae8a831257c6cb7776c5ba5e7249 upstream. The following compilation error is false alarm as RDMA devices don't have such large amount of ports to actually cause to format truncation. drivers/infiniband/core/cma_configfs.c: In function ‘make_cma_ports’: drivers/infiniband/core/cma_configfs.c:223:57: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 223 | snprintf(port_str, sizeof(port_str), "%u", i + 1); | ^ drivers/infiniband/core/cma_configfs.c:223:17: note: ‘snprintf’ output between 2 and 11 bytes into a destination of size 10 223 | snprintf(port_str, sizeof(port_str), "%u", i + 1); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[5]: *** [scripts/Makefile.build:243: drivers/infiniband/core/cma_configfs.o] Error 1 Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Link: https://lore.kernel.org/r/a7e3b347ee134167fa6a3787c56ef231a04bc8c2.1694434639.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 7f6136ced1b859ebf51bb3ffef2581b979476596 Author: Mark Zhang Date: Wed Sep 27 12:05:11 2023 +0300 RDMA/cma: Initialize ib_sa_multicast structure to 0 when join commit e0fe97efdb00f0f32b038a4836406a82886aec9c upstream. Initialize the structure to 0 so that it's fields won't have random values. For example fields like rec.traffic_class (as well as rec.flow_label and rec.sl) is used to generate the user AH through: cma_iboe_join_multicast cma_make_mc_event ib_init_ah_from_mcmember And a random traffic_class causes a random IP DSCP in RoCEv2. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Signed-off-by: Mark Zhang Link: https://lore.kernel.org/r/20230927090511.603595-1-markzhang@nvidia.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 1dd6095fc7271f2212d2a1f1fc60f3908d2410ec Author: Duje Mihanović Date: Fri Sep 29 17:41:57 2023 +0200 gpio: pxa: disable pinctrl calls for MMP_GPIO commit f0575116507b981e6a810e78ce3c9040395b958b upstream. Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting pin direction on MMP either. Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Signed-off-by: Duje Mihanović Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 844fcf4c697c54dda1325a99eecd3080072774d0 Author: Bartosz Golaszewski Date: Tue Oct 3 09:39:26 2023 +0200 gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config() commit f9315f17bf778cb8079a29639419fcc8a41a3c84 upstream. pinctrl_gpio_set_config() expects the GPIO number from the global GPIO numberspace, not the controller-relative offset, which needs to be added to the chip base. Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support") Signed-off-by: Bartosz Golaszewski Reviewed-by: Andy Shevchenko Reviewed-by: Andrew Jeffery Signed-off-by: Greg Kroah-Hartman commit 1878d6666c323cb6f8b36297925808647b6874e6 Author: Christophe JAILLET Date: Sat Sep 23 07:55:56 2023 +0200 IB/mlx4: Fix the size of a buffer in add_port_entries() commit d7f393430a17c2bfcdf805462a5aa80be4285b27 upstream. In order to be sure that 'buff' is never truncated, its size should be 12, not 11. When building with W=1, this fixes the following warnings: drivers/infiniband/hw/mlx4/sysfs.c: In function ‘add_port_entries’: drivers/infiniband/hw/mlx4/sysfs.c:268:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=] 268 | sprintf(buff, "%d", i); | ^ drivers/infiniband/hw/mlx4/sysfs.c:268:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11 268 | sprintf(buff, "%d", i); | ^~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/sysfs.c:286:34: error: ‘sprintf’ may write a terminating nul past the end of the destination [-Werror=format-overflow=] 286 | sprintf(buff, "%d", i); | ^ drivers/infiniband/hw/mlx4/sysfs.c:286:17: note: ‘sprintf’ output between 2 and 12 bytes into a destination of size 11 286 | sprintf(buff, "%d", i); | ^~~~~~~~~~~~~~~~~~~~~~ Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/0bb1443eb47308bc9be30232cc23004c4d4cf43e.1695448530.git.christophe.jaillet@wanadoo.fr Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 718d9b44afca0dc5c4790dd795e92baf029de6fa Author: Dan Carpenter Date: Fri Sep 8 10:03:50 2023 +0300 of: dynamic: Fix potential memory leak in of_changeset_action() commit 55e95bfccf6db8d26a66c46e1de50d53c59a6774 upstream. Smatch complains that the error path where "action" is invalid leaks the "ce" allocation: drivers/of/dynamic.c:935 of_changeset_action() warn: possible memory leak of 'ce' Fix this by doing the validation before the allocation. Note that there is not any actual problem with upstream kernels. All callers of of_changeset_action() are static inlines with fixed action values. Fixes: 914d9d831e61 ("of: dynamic: Refactor action prints to not use "%pOF" inside devtree_lock") Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202309011059.EOdr4im9-lkp@intel.com/ Signed-off-by: Dan Carpenter Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/7dfaf999-30ad-491c-9615-fb1138db121c@moroto.mountain Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit e0878f38b661742b341f4034e17194c7861ecfcb Author: Leon Romanovsky Date: Wed Oct 4 21:17:49 2023 +0300 RDMA/core: Require admin capabilities to set system parameters commit c38d23a54445f9a8aa6831fafc9af0496ba02f9e upstream. Like any other set command, require admin permissions to do it. Cc: stable@vger.kernel.org Fixes: 2b34c5580226 ("RDMA/core: Add command to set ib_core device net namspace sharing mode") Link: https://lore.kernel.org/r/75d329fdd7381b52cbdf87910bef16c9965abb1f.1696443438.git.leon@kernel.org Reviewed-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit 18a839064fc6f6def421376c053a44f868440c58 Author: Fedor Pchelkin Date: Wed Sep 20 13:51:16 2023 +0300 dm zoned: free dmz->ddev array in dmz_put_zoned_devices commit 9850ccd5dd88075b2b7fd28d96299d5535f58cc5 upstream. Commit 4dba12881f88 ("dm zoned: support arbitrary number of devices") made the pointers to additional zoned devices to be stored in a dynamically allocated dmz->ddev array. However, this array is not freed. Rename dmz_put_zoned_device to dmz_put_zoned_devices and fix it to free the dmz->ddev array when cleaning up zoned device information. Remove NULL assignment for all dmz->ddev elements and just free the dmz->ddev array instead. Found by Linux Verification Center (linuxtesting.org). Fixes: 4dba12881f88 ("dm zoned: support arbitrary number of devices") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 8781fe259dd5a178fdd1069401bbd1437f9491c5 Author: Srinivas Pandruvada Date: Tue Oct 3 08:53:32 2023 -0700 HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit [ Upstream commit 8f02139ad9a7e6e5c05712f8c1501eebed8eacfd ] The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe(). Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB") Reported-by: Kai-Heng Feng Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/ Tested-by: Kai-Heng Feng Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 949ccc91c35bddbc75227b50cf7f477bc394e8b9 Author: Jiri Kosina Date: Wed Oct 4 21:10:41 2023 +0200 HID: sony: remove duplicate NULL check before calling usb_free_urb() [ Upstream commit b328dd02e19cb9d3b35de4322f5363516a20ac8c ] usb_free_urb() does the NULL check itself, so there is no need to duplicate it prior to calling. Reported-by: kernel test robot Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()") Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit a02c02adc2bd9476f55c83d87923bf693fb9742e Author: Xin Long Date: Sun Oct 1 11:04:20 2023 -0400 sctp: update hb timer immediately after users change hb_interval [ Upstream commit 1f4e803cd9c9166eb8b6c8b0b8e4124f7499fc07 ] Currently, when hb_interval is changed by users, it won't take effect until the next expiry of hb timer. As the default value is 30s, users have to wait up to 30s to wait its hb_interval update to work. This becomes pretty bad in containers where a much smaller value is usually set on hb_interval. This patch improves it by resetting the hb timer immediately once the value of hb_interval is updated by users. Note that we don't address the already existing 'problem' when sending a heartbeat 'on demand' if one hb has just been sent(from the timer) mentioned in: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg590224.html Signed-off-by: Xin Long Reviewed-by: Simon Horman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/75465785f8ee5df2fb3acdca9b8fafdc18984098.1696172660.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7783b471bfce26c318fd2e401130b5492e04e591 Author: Xin Long Date: Sun Oct 1 10:58:45 2023 -0400 sctp: update transport state when processing a dupcook packet [ Upstream commit 2222a78075f0c19ca18db53fd6623afb4aff602d ] During the 4-way handshake, the transport's state is set to ACTIVE in sctp_process_init() when processing INIT_ACK chunk on client or COOKIE_ECHO chunk on server. In the collision scenario below: 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] when processing COOKIE_ECHO on 192.168.1.2, as it's in COOKIE_WAIT state, sctp_sf_do_dupcook_b() is called by sctp_sf_do_5_2_4_dupcook() where it creates a new association and sets its transport to ACTIVE then updates to the old association in sctp_assoc_update(). However, in sctp_assoc_update(), it will skip the transport update if it finds a transport with the same ipaddr already existing in the old asoc, and this causes the old asoc's transport state not to move to ACTIVE after the handshake. This means if DATA retransmission happens at this moment, it won't be able to enter PF state because of the check 'transport->state == SCTP_ACTIVE' in sctp_do_8_2_transport_strike(). This patch fixes it by updating the transport in sctp_assoc_update() with sctp_assoc_add_peer() where it updates the transport state if there is already a transport with the same ipaddr exists in the old asoc. Signed-off-by: Xin Long Reviewed-by: Simon Horman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/fd17356abe49713ded425250cc1ae51e9f5846c6.1696172325.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1abac613c0d52d883ee46db30308875b6abaefe6 Author: Neal Cardwell Date: Sun Oct 1 11:12:39 2023 -0400 tcp: fix delayed ACKs for MSS boundary condition [ Upstream commit 4720852ed9afb1c5ab84e96135cb5b73d5afde6f ] This commit fixes poor delayed ACK behavior that can cause poor TCP latency in a particular boundary condition: when an application makes a TCP socket write that is an exact multiple of the MSS size. The problem is that there is painful boundary discontinuity in the current delayed ACK behavior. With the current delayed ACK behavior, we have: (1) If an app reads data when > 1*MSS is unacknowledged, then tcp_cleanup_rbuf() ACKs immediately because of: tp->rcv_nxt - tp->rcv_wup > icsk->icsk_ack.rcv_mss || (2) If an app reads all received data, and the packets were < 1*MSS, and either (a) the app is not ping-pong or (b) we received two packets < 1*MSS, then tcp_cleanup_rbuf() ACKs immediately beecause of: ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED2) || ((icsk->icsk_ack.pending & ICSK_ACK_PUSHED) && !inet_csk_in_pingpong_mode(sk))) && (3) *However*: if an app reads exactly 1*MSS of data, tcp_cleanup_rbuf() does not send an immediate ACK. This is true even if the app is not ping-pong and the 1*MSS of data had the PSH bit set, suggesting the sending application completed an application write. Thus if the app is not ping-pong, we have this painful case where >1*MSS gets an immediate ACK, and <1*MSS gets an immediate ACK, but a write whose last skb is an exact multiple of 1*MSS can get a 40ms delayed ACK. This means that any app that transfers data in one direction and takes care to align write size or packet size with MSS can suffer this problem. With receive zero copy making 4KB MSS values more common, it is becoming more common to have application writes naturally align with MSS, and more applications are likely to encounter this delayed ACK problem. The fix in this commit is to refine the delayed ACK heuristics with a simple check: immediately ACK a received 1*MSS skb with PSH bit set if the app reads all data. Why? If an skb has a len of exactly 1*MSS and has the PSH bit set then it is likely the end of an application write. So more data may not be arriving soon, and yet the data sender may be waiting for an ACK if cwnd-bound or using TX zero copy. Thus we set ICSK_ACK_PUSHED in this case so that tcp_cleanup_rbuf() will send an ACK immediately if the app reads all of the data and is not ping-pong. Note that this logic is also executed for the case where len > MSS, but in that case this logic does not matter (and does not hurt) because tcp_cleanup_rbuf() will always ACK immediately if the app reads data and there is more than an MSS of unACKed data. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell Reviewed-by: Yuchung Cheng Reviewed-by: Eric Dumazet Cc: Xin Guo Link: https://lore.kernel.org/r/20231001151239.1866845-2-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 821b3b00bc0fbe72f50d5a347ed0b8a57209fd7b Author: Neal Cardwell Date: Sun Oct 1 11:12:38 2023 -0400 tcp: fix quick-ack counting to count actual ACKs of new data [ Upstream commit 059217c18be6757b95bfd77ba53fb50b48b8a816 ] This commit fixes quick-ack counting so that it only considers that a quick-ack has been provided if we are sending an ACK that newly acknowledges data. The code was erroneously using the number of data segments in outgoing skbs when deciding how many quick-ack credits to remove. This logic does not make sense, and could cause poor performance in request-response workloads, like RPC traffic, where requests or responses can be multi-segment skbs. When a TCP connection decides to send N quick-acks, that is to accelerate the cwnd growth of the congestion control module controlling the remote endpoint of the TCP connection. That quick-ack decision is purely about the incoming data and outgoing ACKs. It has nothing to do with the outgoing data or the size of outgoing data. And in particular, an ACK only serves the intended purpose of allowing the remote congestion control to grow the congestion window quickly if the ACK is ACKing or SACKing new data. The fix is simple: only count packets as serving the goal of the quickack mechanism if they are ACKing/SACKing new data. We can tell whether this is the case by checking inet_csk_ack_scheduled(), since we schedule an ACK exactly when we are ACKing/SACKing new data. Fixes: fc6415bcb0f5 ("[TCP]: Fix quick-ack decrementing with TSO.") Signed-off-by: Neal Cardwell Reviewed-by: Yuchung Cheng Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20231001151239.1866845-1-ncardwell.sw@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 24fb22bddb71c6bfbe0fe25e1b7f793c5b580918 Author: Chengfeng Ye Date: Wed Sep 27 18:14:14 2023 +0000 tipc: fix a potential deadlock on &tx->lock [ Upstream commit 08e50cf071847323414df0835109b6f3560d44f5 ] It seems that tipc_crypto_key_revoke() could be be invoked by wokequeue tipc_crypto_work_rx() under process context and timer/rx callback under softirq context, thus the lock acquisition on &tx->lock seems better use spin_lock_bh() to prevent possible deadlock. This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. tipc_crypto_work_rx() --> tipc_crypto_key_distr() --> tipc_bcast_xmit() --> tipc_bcbase_xmit() --> tipc_bearer_bc_xmit() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) --> tipc_disc_timeout() --> tipc_bearer_xmit_skb() --> tipc_crypto_xmit() --> tipc_ehdr_build() --> tipc_crypto_key_revoke() --> spin_lock(&tx->lock) Signed-off-by: Chengfeng Ye Reviewed-by: Jacob Keller Acked-by: Jon Maloy Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Link: https://lore.kernel.org/r/20230927181414.59928-1-dg573847474@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2e53585e233c876289e5a4dcc09f950eddcf29df Author: Ben Wolsieffer Date: Wed Sep 27 13:57:49 2023 -0400 net: stmmac: dwmac-stm32: fix resume on STM32 MCU [ Upstream commit 6f195d6b0da3b689922ba9e302af2f49592fa9fc ] The STM32MP1 keeps clk_rx enabled during suspend, and therefore the driver does not enable the clock in stm32_dwmac_init() if the device was suspended. The problem is that this same code runs on STM32 MCUs, which do disable clk_rx during suspend, causing the clock to never be re-enabled on resume. This patch adds a variant flag to indicate that clk_rx remains enabled during suspend, and uses this to decide whether to enable the clock in stm32_dwmac_init() if the device was suspended. This approach fixes this specific bug with limited opportunity for unintended side-effects, but I have a follow up patch that will refactor the clock configuration and hopefully make it less error prone. Fixes: 6528e02cc9ff ("net: ethernet: stmmac: add adaptation for stm32mp157c.") Signed-off-by: Ben Wolsieffer Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20230927175749.1419774-1-ben.wolsieffer@hefring.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 74e569324050ad49759b9a4e80bab35e0f4527c0 Author: Benjamin Poirier Date: Tue Sep 26 14:27:30 2023 -0400 ipv4: Set offload_failed flag in fibmatch results [ Upstream commit 0add5c597f3253a9c6108a0a81d57f44ab0d9d30 ] Due to a small omission, the offload_failed flag is missing from ipv4 fibmatch results. Make sure it is set correctly. The issue can be witnessed using the following commands: echo "1 1" > /sys/bus/netdevsim/new_device ip link add dummy1 up type dummy ip route add 192.0.2.0/24 dev dummy1 echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/fib/fail_route_offload ip route add 198.51.100.0/24 dev dummy1 ip route # 192.168.15.0/24 has rt_trap # 198.51.100.0/24 has rt_offload_failed ip route get 192.168.15.1 fibmatch # Result has rt_trap ip route get 198.51.100.1 fibmatch # Result differs from the route shown by `ip route`, it is missing # rt_offload_failed ip link del dev dummy1 echo 1 > /sys/bus/netdevsim/del_device Fixes: 36c5100e859d ("IPv4: Add "offload failed" indication to routes") Signed-off-by: Benjamin Poirier Reviewed-by: Ido Schimmel Reviewed-by: Simon Horman Reviewed-by: David Ahern Link: https://lore.kernel.org/r/20230926182730.231208-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a4b9bbd1d12f81d565fe5616bdbeb143ad54a0fc Author: Florian Westphal Date: Thu Sep 28 15:12:44 2023 +0200 netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure [ Upstream commit 087388278e0f301f4c61ddffb1911d3a180f84b8 ] nft_rbtree_gc_elem() walks back and removes the end interval element that comes before the expired element. There is a small chance that we've cached this element as 'rbe_ge'. If this happens, we hold and test a pointer that has been queued for freeing. It also causes spurious insertion failures: $ cat test-testcases-sets-0044interval_overlap_0.1/testout.log Error: Could not process rule: File exists add element t s { 0 - 2 } ^^^^^^ Failed to insert 0 - 2 given: table ip t { set s { type inet_service flags interval,timeout timeout 2s gc-interval 2s } } The set (rbtree) is empty. The 'failure' doesn't happen on next attempt. Reason is that when we try to insert, the tree may hold an expired element that collides with the range we're adding. While we do evict/erase this element, we can trip over this check: if (rbe_ge && nft_rbtree_interval_end(rbe_ge) && nft_rbtree_interval_end(new)) return -ENOTEMPTY; rbe_ge was erased by the synchronous gc, we should not have done this check. Next attempt won't find it, so retry results in successful insertion. Restart in-kernel to avoid such spurious errors. Such restart are rare, unless userspace intentionally adds very large numbers of elements with very short timeouts while setting a huge gc interval. Even in this case, this cannot loop forever, on each retry an existing element has been removed. As the caller is holding the transaction mutex, its impossible for a second entity to add more expiring elements to the tree. After this it also becomes feasible to remove the async gc worker and perform all garbage collection from the commit path. Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 88497f74d684d6c66e960ecfeb24af80694f6f2a Author: Xin Long Date: Tue Oct 3 13:17:53 2023 -0400 netfilter: handle the connecting collision properly in nf_conntrack_proto_sctp [ Upstream commit 8e56b063c86569e51eed1c5681ce6361fa97fc7a ] In Scenario A and B below, as the delayed INIT_ACK always changes the peer vtag, SCTP ct with the incorrect vtag may cause packet loss. Scenario A: INIT_ACK is delayed until the peer receives its own INIT_ACK 192.168.1.2 > 192.168.1.1: [INIT] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT] [init tag: 1414468151] 192.168.1.2 > 192.168.1.1: [INIT ACK] [init tag: 1328086772] 192.168.1.1 > 192.168.1.2: [INIT ACK] [init tag: 1650211246] * 192.168.1.2 > 192.168.1.1: [COOKIE ECHO] 192.168.1.1 > 192.168.1.2: [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: [COOKIE ACK] Scenario B: INIT_ACK is delayed until the peer completes its own handshake 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] 192.168.1.2 > 192.168.1.1: sctp (1) [INIT ACK] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [COOKIE ECHO] 192.168.1.2 > 192.168.1.1: sctp (1) [COOKIE ACK] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT ACK] [init tag: 3914796021] * This patch fixes it as below: In SCTP_CID_INIT processing: - clear ct->proto.sctp.init[!dir] if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir]. (Scenario E) - set ct->proto.sctp.init[dir]. In SCTP_CID_INIT_ACK processing: - drop it if !ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario B, Scenario C) - drop it if ct->proto.sctp.init[dir] && ct->proto.sctp.init[!dir] && ct->proto.sctp.vtag[!dir] != ih->init_tag. (Scenario A) In SCTP_CID_COOKIE_ACK processing: - clear ct->proto.sctp.init[dir] and ct->proto.sctp.init[!dir]. (Scenario D) Also, it's important to allow the ct state to move forward with cookie_echo and cookie_ack from the opposite dir for the collision scenarios. There are also other Scenarios where it should allow the packet through, addressed by the processing above: Scenario C: new CT is created by INIT_ACK. Scenario D: start INIT on the existing ESTABLISHED ct. Scenario E: start INIT after the old collision on the existing ESTABLISHED ct. 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 3922216408] 192.168.1.1 > 192.168.1.2: sctp (1) [INIT] [init tag: 144230885] (both side are stopped, then start new connection again in hours) 192.168.1.2 > 192.168.1.1: sctp (1) [INIT] [init tag: 242308742] Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Xin Long Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin commit 0c9cf5e8807fb8668432386efa8387fc7bc8ffe3 Author: David Wilder Date: Tue Sep 26 16:42:51 2023 -0500 ibmveth: Remove condition to recompute TCP header checksum. [ Upstream commit 51e7a66666e0ca9642c59464ef8359f0ac604d41 ] In some OVS environments the TCP pseudo header checksum may need to be recomputed. Currently this is only done when the interface instance is configured for "Trunk Mode". We found the issue also occurs in some Kubernetes environments, these environments do not use "Trunk Mode", therefor the condition is removed. Performance tests with this change show only a fractional decrease in throughput (< 0.2%). Fixes: 7525de2516fb ("ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.") Signed-off-by: David Wilder Reviewed-by: Nick Child Reviewed-by: Jacob Keller Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 5a899e2ce8482aae18ded86bbdf63e3f130ad12d Author: Dan Carpenter Date: Tue Sep 26 17:04:43 2023 +0300 net: ethernet: ti: am65-cpsw: Fix error code in am65_cpsw_nuss_init_tx_chns() [ Upstream commit 37d4f55567982e445f86dc0ff4ecfa72921abfe8 ] This accidentally returns success, but it should return a negative error code. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Dan Carpenter Reviewed-by: Roger Quadros Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4837a192f6d06d5bb2f3f47d6ce5353ab69bf86b Author: Jeremy Cline Date: Fri Sep 8 19:58:53 2023 -0400 net: nfc: llcp: Add lock when modifying device list [ Upstream commit dfc7f7a988dad34c3bf4c053124fb26aa6c5f916 ] The device list needs its associated lock held when modifying it, or the list could become corrupted, as syzbot discovered. Reported-and-tested-by: syzbot+c1d0a03d305972dbbe14@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c1d0a03d305972dbbe14 Signed-off-by: Jeremy Cline Reviewed-by: Simon Horman Fixes: 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") Link: https://lore.kernel.org/r/20230908235853.1319596-1-jeremy@jcline.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit cda10784a176d7192f08ecb518f777a4e9575812 Author: Shigeru Yoshida Date: Sun Sep 24 02:35:49 2023 +0900 net: usb: smsc75xx: Fix uninit-value access in __smsc75xx_read_reg [ Upstream commit e9c65989920f7c28775ec4e0c11b483910fb67b8 ] syzbot reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] BUG: KMSAN: uninit-value in smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 CPU: 0 PID: 8696 Comm: kworker/0:3 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:975 [inline] smsc75xx_bind+0x5c9/0x11e0 drivers/net/usb/smsc75xx.c:1482 usbnet_probe+0x1152/0x3f90 drivers/net/usb/usbnet.c:1737 usb_probe_interface+0xece/0x1550 drivers/usb/core/driver.c:374 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_set_configuration+0x380f/0x3f10 drivers/usb/core/message.c:2032 usb_generic_driver_probe+0x138/0x300 drivers/usb/core/generic.c:241 usb_probe_device+0x311/0x490 drivers/usb/core/driver.c:272 really_probe+0xf20/0x20b0 drivers/base/dd.c:529 driver_probe_device+0x293/0x390 drivers/base/dd.c:701 __device_attach_driver+0x63f/0x830 drivers/base/dd.c:807 bus_for_each_drv+0x2ca/0x3f0 drivers/base/bus.c:431 __device_attach+0x4e2/0x7f0 drivers/base/dd.c:873 device_initial_probe+0x4a/0x60 drivers/base/dd.c:920 bus_probe_device+0x177/0x3d0 drivers/base/bus.c:491 device_add+0x3b0e/0x40d0 drivers/base/core.c:2680 usb_new_device+0x1bd4/0x2a30 drivers/usb/core/hub.c:2554 hub_port_connect drivers/usb/core/hub.c:5208 [inline] hub_port_connect_change drivers/usb/core/hub.c:5348 [inline] port_event drivers/usb/core/hub.c:5494 [inline] hub_event+0x5e7b/0x8a70 drivers/usb/core/hub.c:5576 process_one_work+0x1688/0x2140 kernel/workqueue.c:2269 worker_thread+0x10bc/0x2730 kernel/workqueue.c:2415 kthread+0x551/0x590 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 Local variable ----buf.i87@smsc75xx_bind created at: __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 __smsc75xx_read_reg drivers/net/usb/smsc75xx.c:83 [inline] smsc75xx_wait_ready drivers/net/usb/smsc75xx.c:968 [inline] smsc75xx_bind+0x485/0x11e0 drivers/net/usb/smsc75xx.c:1482 This issue is caused because usbnet_read_cmd() reads less bytes than requested (zero byte in the reproducer). In this case, 'buf' is not properly filled. This patch fixes the issue by returning -ENODATA if usbnet_read_cmd() reads less bytes than requested. Fixes: d0cad871703b ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Reported-and-tested-by: syzbot+6966546b78d050bb0b5d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6966546b78d050bb0b5d Signed-off-by: Shigeru Yoshida Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230923173549.3284502-1-syoshida@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 2801a1ddb26d842ff41e473defb3acc3331384ac Author: Fabio Estevam Date: Fri Sep 22 09:47:41 2023 -0300 net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent [ Upstream commit 6ccf50d4d4741e064ba35511a95402c63bbe21a8 ] Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn Signed-off-by: Fabio Estevam Reviewed-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cb145e6c2070b6b0ca3ca42902527dd743700fcc Author: Dinghao Liu Date: Fri Sep 22 17:40:44 2023 +0800 ptp: ocp: Fix error handling in ptp_ocp_device_init [ Upstream commit caa0578c1d487d39e4bb947a1b4965417053b409 ] When device_add() fails, ptp_ocp_dev_release() will be called after put_device(). Therefore, it seems that the ptp_ocp_dev_release() before put_device() is redundant. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dinghao Liu Reviewed-by: Vadim Feodrenko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit cd1189956393bf850b2e275e37411855d3bd86bb Author: David Howells Date: Thu Sep 21 11:41:19 2023 +0100 ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data() [ Upstream commit 9d4c75800f61e5d75c1659ba201b6c0c7ead3070 ] Including the transhdrlen in length is a problem when the packet is partially filled (e.g. something like send(MSG_MORE) happened previously) when appending to an IPv4 or IPv6 packet as we don't want to repeat the transport header or account for it twice. This can happen under some circumstances, such as splicing into an L2TP socket. The symptom observed is a warning in __ip6_append_data(): WARNING: CPU: 1 PID: 5042 at net/ipv6/ip6_output.c:1800 __ip6_append_data.isra.0+0x1be8/0x47f0 net/ipv6/ip6_output.c:1800 that occurs when MSG_SPLICE_PAGES is used to append more data to an already partially occupied skbuff. The warning occurs when 'copy' is larger than the amount of data in the message iterator. This is because the requested length includes the transport header length when it shouldn't. This can be triggered by, for example: sfd = socket(AF_INET6, SOCK_DGRAM, IPPROTO_L2TP); bind(sfd, ...); // ::1 connect(sfd, ...); // ::1 port 7 send(sfd, buffer, 4100, MSG_MORE); sendfile(sfd, dfd, NULL, 1024); Fix this by only adding transhdrlen into the length if the write queue is empty in l2tp_ip6_sendmsg(), analogously to how UDP does things. l2tp_ip_sendmsg() looks like it won't suffer from this problem as it builds the UDP packet itself. Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6") Reported-by: syzbot+62cbf263225ae13ff153@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/0000000000001c12b30605378ce8@google.com/ Suggested-by: Willem de Bruijn Signed-off-by: David Howells cc: Eric Dumazet cc: Willem de Bruijn cc: "David S. Miller" cc: David Ahern cc: Paolo Abeni cc: Jakub Kicinski cc: netdev@vger.kernel.org cc: bpf@vger.kernel.org cc: syzkaller-bugs@googlegroups.com Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 147d89ee41434b97043c2dcb17a97dc151859baa Author: Eric Dumazet Date: Thu Sep 21 08:46:26 2023 +0000 net: fix possible store tearing in neigh_periodic_work() [ Upstream commit 25563b581ba3a1f263a00e8c9a97f5e7363be6fd ] While looking at a related syzbot report involving neigh_periodic_work(), I found that I forgot to add an annotation when deleting an RCU protected item from a list. Readers use rcu_deference(*np), we need to use either rcu_assign_pointer() or WRITE_ONCE() on writer side to prevent store tearing. I use rcu_assign_pointer() to have lockdep support, this was the choice made in neigh_flush_dev(). Fixes: 767e97e1e0db ("neigh: RCU conversion of struct neighbour") Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit bdb4fcf18e16b768a70f833dbed4b6dd479d6895 Author: Mauricio Faria de Oliveira Date: Thu Sep 28 17:28:07 2023 -0300 modpost: add missing else to the "of" check [ Upstream commit cbc3d00cf88fda95dbcafee3b38655b7a8f2650a ] Without this 'else' statement, an "usb" name goes into two handlers: the first/previous 'if' statement _AND_ the for-loop over 'devtable', but the latter is useless as it has no 'usb' device_id entry anyway. Tested with allmodconfig before/after patch; no changes to *.mod.c: git checkout v6.6-rc3 make -j$(nproc) allmodconfig make -j$(nproc) olddefconfig make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/before # apply patch make -j$(nproc) find . -name '*.mod.c' | cpio -pd /tmp/after diff -r /tmp/before/ /tmp/after/ # no difference Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property") Signed-off-by: Mauricio Faria de Oliveira Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit bc8b89b6963803a123f64aa9494155a037b3d728 Author: Jakub Sitnicki Date: Wed Sep 20 12:20:55 2023 +0200 bpf, sockmap: Reject sk_msg egress redirects to non-TCP sockets [ Upstream commit b80e31baa43614e086a9d29dc1151932b1bd7fc5 ] With a SOCKMAP/SOCKHASH map and an sk_msg program user can steer messages sent from one TCP socket (s1) to actually egress from another TCP socket (s2): tcp_bpf_sendmsg(s1) // = sk_prot->sendmsg tcp_bpf_send_verdict(s1) // __SK_REDIRECT case tcp_bpf_sendmsg_redir(s2) tcp_bpf_push_locked(s2) tcp_bpf_push(s2) tcp_rate_check_app_limited(s2) // expects tcp_sock tcp_sendmsg_locked(s2) // ditto There is a hard-coded assumption in the call-chain, that the egress socket (s2) is a TCP socket. However in commit 122e6c79efe1 ("sock_map: Update sock type checks for UDP") we have enabled redirects to non-TCP sockets. This was done for the sake of BPF sk_skb programs. There was no indention to support sk_msg send-to-egress use case. As a result, attempts to send-to-egress through a non-TCP socket lead to a crash due to invalid downcast from sock to tcp_sock: BUG: kernel NULL pointer dereference, address: 000000000000002f ... Call Trace: ? show_regs+0x60/0x70 ? __die+0x1f/0x70 ? page_fault_oops+0x80/0x160 ? do_user_addr_fault+0x2d7/0x800 ? rcu_is_watching+0x11/0x50 ? exc_page_fault+0x70/0x1c0 ? asm_exc_page_fault+0x27/0x30 ? tcp_tso_segs+0x14/0xa0 tcp_write_xmit+0x67/0xce0 __tcp_push_pending_frames+0x32/0xf0 tcp_push+0x107/0x140 tcp_sendmsg_locked+0x99f/0xbb0 tcp_bpf_push+0x19d/0x3a0 tcp_bpf_sendmsg_redir+0x55/0xd0 tcp_bpf_send_verdict+0x407/0x550 tcp_bpf_sendmsg+0x1a1/0x390 inet_sendmsg+0x6a/0x70 sock_sendmsg+0x9d/0xc0 ? sockfd_lookup_light+0x12/0x80 __sys_sendto+0x10e/0x160 ? syscall_enter_from_user_mode+0x20/0x60 ? __this_cpu_preempt_check+0x13/0x20 ? lockdep_hardirqs_on+0x82/0x110 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reject selecting a non-TCP sockets as redirect target from a BPF sk_msg program to prevent the crash. When attempted, user will receive an EACCES error from send/sendto/sendmsg() syscall. Fixes: 122e6c79efe1 ("sock_map: Update sock type checks for UDP") Signed-off-by: Jakub Sitnicki Signed-off-by: Daniel Borkmann Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20230920102055.42662-1-jakub@cloudflare.com Signed-off-by: Sasha Levin commit 9fb4dfb8e2120b7d4153ea83601367b04db8dfd4 Author: Trond Myklebust Date: Sun Sep 17 19:05:50 2023 -0400 NFSv4: Fix a nfs4_state_manager() race [ Upstream commit ed1cc05aa1f7fe8197d300e914afc28ab9818f89 ] If the NFS4CLNT_RUN_MANAGER flag got set just before we cleared NFS4CLNT_MANAGER_RUNNING, then we might have won the race against nfs4_schedule_state_manager(), and are responsible for handling the recovery situation. Fixes: aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit fcdd79fda38ad9a746139e421892faa27b5b9189 Author: Arnd Bergmann Date: Wed Sep 27 09:22:14 2023 +0200 ima: rework CONFIG_IMA dependency block [ Upstream commit 91e326563ee34509c35267808a4b1b3ea3db62a8 ] Changing the direct dependencies of IMA_BLACKLIST_KEYRING and IMA_LOAD_X509 caused them to no longer depend on IMA, but a a configuration without IMA results in link failures: arm-linux-gnueabi-ld: security/integrity/iint.o: in function `integrity_load_keys': iint.c:(.init.text+0xd8): undefined reference to `ima_load_x509' aarch64-linux-ld: security/integrity/digsig_asymmetric.o: in function `asymmetric_verify': digsig_asymmetric.c:(.text+0x104): undefined reference to `ima_blacklist_keyring' Adding explicit dependencies on IMA would fix this, but a more reliable way to do this is to enclose the entire Kconfig file in an 'if IMA' block. This also allows removing the existing direct dependencies. Fixes: be210c6d3597f ("ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig") Signed-off-by: Arnd Bergmann Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin commit b67adca1e1bec0a2ebd6d9ca37e2fd4b1823977b Author: Junxiao Bi Date: Mon Sep 18 15:58:48 2023 -0700 scsi: target: core: Fix deadlock due to recursive locking [ Upstream commit a154f5f643c6ecddd44847217a7a3845b4350003 ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb460bcb ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 9a103e0b100cc29a584b4568c5db9cba2f414d2c Author: Oleksandr Tymoshenko Date: Thu Sep 21 06:45:05 2023 +0000 ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig [ Upstream commit be210c6d3597faf330cb9af33b9f1591d7b2a983 ] The removal of IMA_TRUSTED_KEYRING made IMA_LOAD_X509 and IMA_BLACKLIST_KEYRING unavailable because the latter two depend on the former. Since IMA_TRUSTED_KEYRING was deprecated in favor of INTEGRITY_TRUSTED_KEYRING use it as a dependency for the two Kconfigs affected by the deprecation. Fixes: 5087fd9e80e5 ("ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig") Signed-off-by: Oleksandr Tymoshenko Reviewed-by: Nayna Jain Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin commit bb6aee0696c6535cb10bc44c1e5620e2f2cd43af Author: Richard Fitzgerald Date: Fri Sep 22 16:37:11 2023 +0100 regmap: rbtree: Fix wrong register marked as in-cache when creating new node [ Upstream commit 7a795ac8d49e2433e1b97caf5e99129daf8e1b08 ] When regcache_rbtree_write() creates a new rbtree_node it was passing the wrong bit number to regcache_rbtree_set_register(). The bit number is the offset __in number of registers__, but in the case of creating a new block regcache_rbtree_write() was not dividing by the address stride to get the number of registers. Fix this by dividing by map->reg_stride. Compare with regcache_rbtree_read() where the bit is checked. This bug meant that the wrong register was marked as present. The register that was written to the cache could not be read from the cache because it was not marked as cached. But a nearby register could be marked as having a cached value even if it was never written to the cache. Signed-off-by: Richard Fitzgerald Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node") Link: https://lore.kernel.org/r/20230922153711.28103-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0cee8c1b3af374dcc8a8a2c9489b0dea3c7387ef Author: Felix Fietkau Date: Tue Sep 19 21:47:47 2023 +0200 wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling [ Upstream commit 684e45e120b82deccaf8b85633905304a3bbf56d ] On MT76x0, LNA gain should be applied for both external and internal LNA. On MT76x2, LNA gain should be treated as 0 for external LNA. Move the LNA type based logic to mt76x2 in order to fix mt76x0. Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing") Reported-by: Shiji Yang Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name Signed-off-by: Sasha Levin commit 3f6fbbccba2d5805c22865934ddd3630863dd7eb Author: Alexandra Diupina Date: Tue Sep 19 17:25:02 2023 +0300 drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close() [ Upstream commit a59addacf899b1b21a7b7449a1c52c98704c2472 ] Process the result of hdlc_open() and call uhdlc_close() in case of an error. It is necessary to pass the error code up the control flow, similar to a possible error in request_irq(). Also add a hdlc_close() call to the uhdlc_close() because the comment to hdlc_close() says it must be called by the hardware driver when the HDLC device is being closed Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by: Alexandra Diupina Reviewed-by: Christophe Leroy Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ebad2e4c4847752c96b77aee0c8167cd7929a6e9 Author: Leon Hwang Date: Sun Sep 17 23:38:46 2023 +0800 bpf: Fix tr dereferencing [ Upstream commit b724a6418f1f853bcb39c8923bf14a50c7bdbd07 ] Fix 'tr' dereferencing bug when CONFIG_BPF_JIT is turned off. When CONFIG_BPF_JIT is turned off, 'bpf_trampoline_get()' returns NULL, which is same as the cases when CONFIG_BPF_JIT is turned on. Closes: https://lore.kernel.org/r/202309131936.5Nc8eUD0-lkp@intel.com/ Fixes: f7b12b6fea00 ("bpf: verifier: refactor check_attach_btf_id()") Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Leon Hwang Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20230917153846.88732-1-hffilwlqm@gmail.com Signed-off-by: Sasha Levin commit 5afb996349cb6d1f14d6ba9aaa7aed3bd82534f6 Author: Pin-yen Lin Date: Fri Sep 8 18:41:12 2023 +0800 wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet [ Upstream commit aef7a0300047e7b4707ea0411dc9597cba108fc8 ] Only skip the code path trying to access the rfc1042 headers when the buffer is too small, so the driver can still process packets without rfc1042 headers. Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets") Signed-off-by: Pin-yen Lin Acked-by: Brian Norris Reviewed-by: Matthew Wang Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230908104308.1546501-1-treapking@chromium.org Signed-off-by: Sasha Levin commit 7c8faa31080342aec4903c9acb20caf82fcca1ef Author: Christophe JAILLET Date: Sun Jul 23 22:24:59 2023 +0200 wifi: iwlwifi: mvm: Fix a memory corruption issue [ Upstream commit 8ba438ef3cacc4808a63ed0ce24d4f0942cfe55d ] A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct ieee80211_channel'. So only 1 element is allocated in this array. When doing: mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the 'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void *)((u8 *)mvm->nvm_data->channels + 1); because of the "(u8 *)" cast, we add only 1 to the address of the beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just after. Remove the spurious casting so that the pointer arithmetic works as expected. Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Christophe JAILLET Acked-by: Gregory Greenman Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 5db7af530ebdbc40416101fe9f153517bf73d064 Author: Johannes Berg Date: Fri Jan 28 15:34:29 2022 +0200 iwlwifi: avoid void pointer arithmetic [ Upstream commit 3827cb59b3b8ce4b1687385d35034dadcd90d7ce ] Avoid void pointer arithmetic since it's technically undefined and causes warnings in some places that use our code. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20220128153014.e349104ecd94.Iadc937f475158b9437becdfefb361a97e7eaa934@changeid Signed-off-by: Luca Coelho Stable-dep-of: 8ba438ef3cac ("wifi: iwlwifi: mvm: Fix a memory corruption issue") Signed-off-by: Sasha Levin commit 6ff75f524dae47b705b6182187ad25c278d3ce89 Author: Arnd Bergmann Date: Fri Jun 16 11:03:34 2023 +0200 wifi: iwlwifi: dbg_ini: fix structure packing [ Upstream commit 424c82e8ad56756bb98b08268ffcf68d12d183eb ] The iwl_fw_ini_error_dump_range structure has conflicting alignment requirements for the inner union and the outer struct: In file included from drivers/net/wireless/intel/iwlwifi/fw/dbg.c:9: drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2: error: field within 'struct iwl_fw_ini_error_dump_range' is less aligned than 'union iwl_fw_ini_error_dump_range::(anonymous at drivers/net/wireless/intel/iwlwifi/fw/error-dump.h:312:2)' and is usually due to 'struct iwl_fw_ini_error_dump_range' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access] union { As the original intention was apparently to make the entire structure unaligned, mark the innermost members the same way so the union becomes packed as well. Fixes: 973193554cae6 ("iwlwifi: dbg_ini: dump headers cleanup") Signed-off-by: Arnd Bergmann Acked-by: Gregory Greenman Link: https://lore.kernel.org/r/20230616090343.2454061-1-arnd@kernel.org Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 0ea2a63497333019bd2931975ed489216b365755 Author: Zhihao Cheng Date: Sun Apr 23 19:10:41 2023 +0800 ubi: Refuse attaching if mtd's erasesize is 0 [ Upstream commit 017c73a34a661a861712f7cc1393a123e5b2208c ] There exists mtd devices with zero erasesize, which will trigger a divide-by-zero exception while attaching ubi device. Fix it by refusing attaching if mtd's erasesize is 0. Fixes: 801c135ce73d ("UBI: Unsorted Block Images") Reported-by: Yu Hao Link: https://lore.kernel.org/lkml/977347543.226888.1682011999468.JavaMail.zimbra@nod.at/T/ Signed-off-by: Zhihao Cheng Reviewed-by: Miquel Raynal Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit bb0707fde7492121917fd9ddb43829e96ec0bb9e Author: Christophe JAILLET Date: Sun Sep 3 18:04:00 2023 +0200 HID: sony: Fix a potential memory leak in sony_probe() [ Upstream commit e1cd4004cde7c9b694bbdd8def0e02288ee58c74 ] If an error occurs after a successful usb_alloc_urb() call, usb_free_urb() should be called. Fixes: fb1a79a6b6e1 ("HID: sony: fix freeze when inserting ghlive ps3/wii dongles") Signed-off-by: Christophe JAILLET Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 8afbacf6191985f175b15bc625417d1e117b020a Author: Rob Herring Date: Thu Sep 21 14:41:51 2023 -0500 arm64: Add Cortex-A520 CPU part definition commit a654a69b9f9c06b2e56387d0b99f0e3e6b0ff4ef upstream. Add the CPU Part number for the new Arm design. Cc: stable@vger.kernel.org Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20230921194156.1050055-1-robh@kernel.org Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 0da6d21ba2354b3fa8a4274c458586744802fa70 Author: Mario Limonciello Date: Tue Sep 26 17:59:53 2023 -0500 drm/amd: Fix detection of _PR3 on the PCIe root port commit 134b8c5d8674e7cde380f82e9aedfd46dcdd16f7 upstream. On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma Tested-by: David Perry Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman commit 1ad7ccd45a6546204660faf19d6bd95859185634 Author: Jordan Rife Date: Thu Sep 21 18:46:41 2023 -0500 net: prevent rewrite of msg_name in sock_sendmsg() commit 86a7e0b69bd5b812e48a20c66c2161744f3caa16 upstream. Callers of sock_sendmsg(), and similarly kernel_sendmsg(), in kernel space may observe their value of msg_name change in cases where BPF sendmsg hooks rewrite the send address. This has been confirmed to break NFS mounts running in UDP mode and has the potential to break other systems. This patch: 1) Creates a new function called __sock_sendmsg() with same logic as the old sock_sendmsg() function. 2) Replaces calls to sock_sendmsg() made by __sys_sendto() and __sys_sendmsg() with __sock_sendmsg() to avoid an unnecessary copy, as these system calls are already protected. 3) Modifies sock_sendmsg() so that it makes a copy of msg_name if present before passing it down the stack to insulate callers from changes to the send address. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn Signed-off-by: Jordan Rife Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0fb3df94274b4b7a3a1c75882362c759c1c90240 Author: Jordan Rife Date: Thu Sep 21 18:46:40 2023 -0500 net: replace calls to sock->ops->connect() with kernel_connect() commit 26297b4ce1ce4ea40bc9a48ec99f45da3f64d2e2 upstream. commit 0bdf399342c5 ("net: Avoid address overwrite in kernel_connect") ensured that kernel_connect() will not overwrite the address parameter in cases where BPF connect hooks perform an address rewrite. This change replaces direct calls to sock->ops->connect() in net with kernel_connect() to make these call safe. Link: https://lore.kernel.org/netdev/20230912013332.2048422-1-jrife@google.com/ Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect") Cc: stable@vger.kernel.org Reviewed-by: Willem de Bruijn Signed-off-by: Jordan Rife Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 37b54e8acea5f00e56797dc02b9cc4909bcd035c Author: Gustavo A. R. Silva Date: Thu Aug 24 21:06:51 2023 -0600 wifi: mwifiex: Fix tlv_buf_left calculation commit eec679e4ac5f47507774956fb3479c206e761af7 upstream. In a TLV encoding scheme, the Length part represents the length after the header containing the values for type and length. In this case, `tlv_len` should be: tlv_len == (sizeof(*tlv_rxba) - 1) - sizeof(tlv_rxba->header) + tlv_bitmap_len Notice that the `- 1` accounts for the one-element array `bitmap`, which 1-byte size is already included in `sizeof(*tlv_rxba)`. So, if the above is correct, there is a double-counting of some members in `struct mwifiex_ie_types_rxba_sync`, when `tlv_buf_left` and `tmp` are calculated: 968 tlv_buf_left -= (sizeof(*tlv_rxba) + tlv_len); 969 tmp = (u8 *)tlv_rxba + tlv_len + sizeof(*tlv_rxba); in specific, members: drivers/net/wireless/marvell/mwifiex/fw.h:777 777 u8 mac[ETH_ALEN]; 778 u8 tid; 779 u8 reserved; 780 __le16 seq_num; 781 __le16 bitmap_len; This is clearly wrong, and affects the subsequent decoding of data in `event_buf` through `tlv_rxba`: 970 tlv_rxba = (struct mwifiex_ie_types_rxba_sync *)tmp; Fix this by using `sizeof(tlv_rxba->header)` instead of `sizeof(*tlv_rxba)` in the calculation of `tlv_buf_left` and `tmp`. This results in the following binary differences before/after changes: | drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o | @@ -4698,11 +4698,11 @@ | drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:968 | tlv_buf_left -= (sizeof(tlv_rxba->header) + tlv_len); | - 1da7: lea -0x11(%rbx),%edx | + 1da7: lea -0x4(%rbx),%edx | 1daa: movzwl %bp,%eax | drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c:969 | tmp = (u8 *)tlv_rxba + sizeof(tlv_rxba->header) + tlv_len; | - 1dad: lea 0x11(%r15,%rbp,1),%r15 | + 1dad: lea 0x4(%r15,%rbp,1),%r15 The above reflects the desired change: avoid counting 13 too many bytes; which is the total size of the double-counted members in `struct mwifiex_ie_types_rxba_sync`: $ pahole -C mwifiex_ie_types_rxba_sync drivers/net/wireless/marvell/mwifiex/11n_rxreorder.o struct mwifiex_ie_types_rxba_sync { struct mwifiex_ie_types_header header; /* 0 4 */ |----------------------------------------------------------------------- | u8 mac[6]; /* 4 6 */ | | u8 tid; /* 10 1 */ | | u8 reserved; /* 11 1 */ | | __le16 seq_num; /* 12 2 */ | | __le16 bitmap_len; /* 14 2 */ | | u8 bitmap[1]; /* 16 1 */ | |----------------------------------------------------------------------| | 13 bytes| ----------- /* size: 17, cachelines: 1, members: 7 */ /* last cacheline: 17 bytes */ } __attribute__((__packed__)); Fixes: 99ffe72cdae4 ("mwifiex: process rxba_sync event") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/06668edd68e7a26bbfeebd1201ae077a2a7a8bce.1692931954.git.gustavoars@kernel.org Signed-off-by: Greg Kroah-Hartman commit e80f55d6d2a98e4b9f4b64e608411de3e9f30f13 Author: Gustavo A. R. Silva Date: Sat Sep 23 19:15:59 2023 -0600 qed/red_ll2: Fix undefined behavior bug in struct qed_ll2_info commit eea03d18af9c44235865a4bc9bec4d780ef6cf21 upstream. The flexible structure (a structure that contains a flexible-array member at the end) `qed_ll2_tx_packet` is nested within the second layer of `struct qed_ll2_info`: struct qed_ll2_tx_packet { ... /* Flexible Array of bds_set determined by max_bds_per_packet */ struct { struct core_tx_bd *txq_bd; dma_addr_t tx_frag; u16 frag_len; } bds_set[]; }; struct qed_ll2_tx_queue { ... struct qed_ll2_tx_packet cur_completing_packet; }; struct qed_ll2_info { ... struct qed_ll2_tx_queue tx_queue; struct qed_ll2_cbs cbs; }; The problem is that member `cbs` in `struct qed_ll2_info` is placed just after an object of type `struct qed_ll2_tx_queue`, which is in itself an implicit flexible structure, which by definition ends in a flexible array member, in this case `bds_set`. This causes an undefined behavior bug at run-time when dynamic memory is allocated for `bds_set`, which could lead to a serious issue if `cbs` in `struct qed_ll2_info` is overwritten by the contents of `bds_set`. Notice that the type of `cbs` is a structure full of function pointers (and a cookie :) ): include/linux/qed/qed_ll2_if.h: 107 typedef 108 void (*qed_ll2_complete_rx_packet_cb)(void *cxt, 109 struct qed_ll2_comp_rx_data *data); 110 111 typedef 112 void (*qed_ll2_release_rx_packet_cb)(void *cxt, 113 u8 connection_handle, 114 void *cookie, 115 dma_addr_t rx_buf_addr, 116 bool b_last_packet); 117 118 typedef 119 void (*qed_ll2_complete_tx_packet_cb)(void *cxt, 120 u8 connection_handle, 121 void *cookie, 122 dma_addr_t first_frag_addr, 123 bool b_last_fragment, 124 bool b_last_packet); 125 126 typedef 127 void (*qed_ll2_release_tx_packet_cb)(void *cxt, 128 u8 connection_handle, 129 void *cookie, 130 dma_addr_t first_frag_addr, 131 bool b_last_fragment, bool b_last_packet); 132 133 typedef 134 void (*qed_ll2_slowpath_cb)(void *cxt, u8 connection_handle, 135 u32 opaque_data_0, u32 opaque_data_1); 136 137 struct qed_ll2_cbs { 138 qed_ll2_complete_rx_packet_cb rx_comp_cb; 139 qed_ll2_release_rx_packet_cb rx_release_cb; 140 qed_ll2_complete_tx_packet_cb tx_comp_cb; 141 qed_ll2_release_tx_packet_cb tx_release_cb; 142 qed_ll2_slowpath_cb slowpath_cb; 143 void *cookie; 144 }; Fix this by moving the declaration of `cbs` to the middle of its containing structure `qed_ll2_info`, preventing it from being overwritten by the contents of `bds_set` at run-time. This bug was introduced in 2017, when `bds_set` was converted to a one-element array, and started to be used as a Variable Length Object (VLO) at run-time. Fixes: f5823fe6897c ("qed: Add ll2 option to limit the number of bds per packet") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/ZQ+Nz8DfPg56pIzr@work Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 1e69422efcc60571cc04f6c1940da848a8c2f21b Author: Stefano Garzarella Date: Mon Sep 25 12:30:57 2023 +0200 vringh: don't use vringh_kiov_advance() in vringh_iov_xfer() commit 7aed44babc7f97e82b38e9a68515e699692cc100 upstream. In the while loop of vringh_iov_xfer(), `partlen` could be 0 if one of the `iov` has 0 lenght. In this case, we should skip the iov and go to the next one. But calling vringh_kiov_advance() with 0 lenght does not cause the advancement, since it returns immediately if asked to advance by 0 bytes. Let's restore the code that was there before commit b8c06ad4d67d ("vringh: implement vringh_kiov_advance()"), avoiding using vringh_kiov_advance(). Fixes: b8c06ad4d67d ("vringh: implement vringh_kiov_advance()") Cc: stable@vger.kernel.org Reported-by: Jason Wang Signed-off-by: Stefano Garzarella Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4e2f83952b1dbbf19d85bed97600682f025ff082 Author: Dinghao Liu Date: Sat Sep 23 18:37:23 2023 +0800 scsi: zfcp: Fix a double put in zfcp_port_enqueue() commit b481f644d9174670b385c3a699617052cd2a79d3 upstream. When device_register() fails, zfcp_port_release() will be called after put_device(). As a result, zfcp_ccw_adapter_put() will be called twice: one in zfcp_port_release() and one in the error path after device_register(). So the reference on the adapter object is doubly put, which may lead to a premature free. Fix this by adjusting the error tag after device_register(). Fixes: f3450c7b9172 ("[SCSI] zfcp: Replace local reference counting with common kref") Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20230923103723.10320-1-dinghao.liu@zju.edu.cn Acked-by: Benjamin Block Cc: stable@vger.kernel.org # v2.6.33+ Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit 310bca649b30c033b9e33d0c1e722fdb211083b5 Author: Greg Kroah-Hartman Date: Sat Oct 7 13:42:26 2023 +0200 Revert "clk: imx: pll14xx: dynamically configure PLL for 393216000/361267200Hz" This reverts commit a8474506c9127048c058fdfe466ccbadf7524048 which is commit 72d00e560d10665e6139c9431956a87ded6e9880 upstream. Marek writes: The commit message states 'Cc: stable@vger.kernel.org # v5.18+' and the commit should only be applied to Linux 5.18.y and newer, on anything older it breaks PLL configuration due to missing prerequisite patches. Reported-by: Marek Vasut Cc: Ahmad Fatoum Cc: Marco Felsch Cc: Abel Vesa Link: https://lore.kernel.org/r/4e5fa5b2-66b8-8f0b-ccb9-c2b774054e4e@denx.de Signed-off-by: Greg Kroah-Hartman commit 3f59e63568adb57bc0703942b6d2c99e4f1595b1 Author: Ming Lei Date: Thu Dec 15 10:16:29 2022 +0800 block: fix use-after-free of q->q_usage_counter commit d36a9ea5e7766961e753ee38d4c331bbe6ef659b upstream. For blk-mq, queue release handler is usually called after blk_mq_freeze_queue_wait() returns. However, the q_usage_counter->release() handler may not be run yet at that time, so this can cause a use-after-free. Fix the issue by moving percpu_ref_exit() into blk_free_queue_rcu(). Since ->release() is called with rcu read lock held, it is agreed that the race should be covered in caller per discussion from the two links. Reported-by: Zhang Wensheng Reported-by: Zhong Jinghua Link: https://lore.kernel.org/linux-block/Y5prfOjyyjQKUrtH@T590/T/#u Link: https://lore.kernel.org/lkml/Y4%2FmzMd4evRg9yDi@fedora/ Cc: Hillf Danton Cc: Yu Kuai Cc: Dennis Zhou Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20221215021629.74870-1-ming.lei@redhat.com Signed-off-by: Jens Axboe Signed-off-by: Saranya Muruganandam Signed-off-by: Greg Kroah-Hartman commit b75b017b3f375604e18b829e7de78e440c9ebe5a Author: Ilya Dryomov Date: Thu Oct 5 11:59:35 2023 +0200 rbd: take header_rwsem in rbd_dev_refresh() only when updating commit 0b207d02bd9ab8dcc31b262ca9f60dbc1822500d upstream. rbd_dev_refresh() has been holding header_rwsem across header and parent info read-in unnecessarily for ages. With commit 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held"), the potential for deadlocks became much more real owning to a) header_rwsem now nesting inside lock_rwsem and b) rw_semaphores not allowing new readers after a writer is registered. For example, assuming that I/O request 1, I/O request 2 and header read-in request all target the same OSD: 1. I/O request 1 comes in and gets submitted 2. watch error occurs 3. rbd_watch_errcb() takes lock_rwsem for write, clears owner_cid and releases lock_rwsem 4. after reestablishing the watch, rbd_reregister_watch() calls rbd_dev_refresh() which takes header_rwsem for write and submits a header read-in request 5. I/O request 2 comes in: after taking lock_rwsem for read in __rbd_img_handle_request(), it blocks trying to take header_rwsem for read in rbd_img_object_requests() 6. another watch error occurs 7. rbd_watch_errcb() blocks trying to take lock_rwsem for write 8. I/O request 1 completion is received by the messenger but can't be processed because lock_rwsem won't be granted anymore 9. header read-in request completion can't be received, let alone processed, because the messenger is stranded Change rbd_dev_refresh() to take header_rwsem only for actually updating rbd_dev->header. Header and parent info read-in don't need any locking. Cc: stable@vger.kernel.org # 0b035401c570: rbd: move rbd_dev_refresh() definition Cc: stable@vger.kernel.org # 510a7330c82a: rbd: decouple header read-in from updating rbd_dev->header Cc: stable@vger.kernel.org # c10311776f0a: rbd: decouple parent info read-in from updating rbd_dev Cc: stable@vger.kernel.org Fixes: 870611e4877e ("rbd: get snapshot context after exclusive lock is ensured to be held") Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Sasha Levin commit 33229d783466f18855c383e8c29a5a9cc878a10b Author: Ilya Dryomov Date: Thu Oct 5 11:59:34 2023 +0200 rbd: decouple parent info read-in from updating rbd_dev commit c10311776f0a8ddea2276df96e255625b07045a8 upstream. Unlike header read-in, parent info read-in is already decoupled in get_parent_info(), but it's buried in rbd_dev_v2_parent_info() along with the processing logic. Separate the initial read-in and update read-in logic into rbd_dev_setup_parent() and rbd_dev_update_parent() respectively and have rbd_dev_v2_parent_info() just populate struct parent_image_info (i.e. what get_parent_info() did). Some existing QoI issues, like flatten of a standalone clone being disregarded on refresh, remain. Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Sasha Levin commit ab73e7ed79d3e630d536e4b2a1f15159d3d6246b Author: Ilya Dryomov Date: Thu Oct 5 11:59:33 2023 +0200 rbd: decouple header read-in from updating rbd_dev->header commit 510a7330c82a7754d5df0117a8589e8a539067c7 upstream. Make rbd_dev_header_info() populate a passed struct rbd_image_header instead of rbd_dev->header and introduce rbd_dev_update_header() for updating mutable fields in rbd_dev->header upon refresh. The initial read-in of both mutable and immutable fields in rbd_dev_image_probe() passes in rbd_dev->header so no update step is required there. rbd_init_layout() is now called directly from rbd_dev_image_probe() instead of individually in format 1 and format 2 implementations. Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Sasha Levin commit b4ddad3fb0eadf08b5a0bbd7bb374ebb079a5d54 Author: Ilya Dryomov Date: Thu Oct 5 11:59:32 2023 +0200 rbd: move rbd_dev_refresh() definition commit 0b035401c57021fc6c300272cbb1c5a889d4fe45 upstream. Move rbd_dev_refresh() definition further down to avoid having to move struct parent_image_info definition in the next commit. This spares some forward declarations too. Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang [idryomov@gmail.com: backport to 5.10-6.1: context] Signed-off-by: Sasha Levin commit bb1fae816c9001ebb18e928a2f76a9e99f522ee9 Author: Robin Murphy Date: Mon Sep 11 12:57:04 2023 +0100 iommu/arm-smmu-v3: Avoid constructing invalid range commands [ Upstream commit eb6c97647be227822c7ce23655482b05e348fba5 ] Although io-pgtable's non-leaf invalidations are always for full tables, I missed that SVA also uses non-leaf invalidations, while being at the mercy of whatever range the MMU notifier throws at it. This means it definitely wants the previous TTL fix as well, since it also doesn't know exactly which leaf level(s) may need invalidating, but it can also give us less-aligned ranges wherein certain corners may lead to building an invalid command where TTL, Num and Scale are all 0. It should be fine to handle this by over-invalidating an extra page, since falling back to a non-range command opens up a whole can of errata-flavoured worms. Fixes: 6833b8f2e199 ("iommu/arm-smmu-v3: Set TTL invalidation hint better") Reported-by: Rui Zhu Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/b99cfe71af2bd93a8a2930f20967fb2a4f7748dd.1694432734.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit c4edc7b5c8367edeb78844e85cd310a821a1475e Author: Robin Murphy Date: Thu Jun 1 17:43:33 2023 +0100 iommu/arm-smmu-v3: Set TTL invalidation hint better [ Upstream commit 6833b8f2e19945a41e4d5efd8c6d9f4cae9a5b7d ] When io-pgtable unmaps a whole table, rather than waste time walking it to find the leaf entries to invalidate exactly, it simply expects .tlb_flush_walk with nominal last-level granularity to invalidate any leaf entries at higher intermediate levels as well. This works fine with page-based invalidation, but with range commands we need to be careful with the TTL hint - unconditionally setting it based on the given level 3 granule means that an invalidation for a level 1 table would strictly not be required to affect level 2 block entries. It's easy to comply with the expected behaviour by simply not setting the TTL hint for non-leaf invalidations, so let's do that. Signed-off-by: Robin Murphy Link: https://lore.kernel.org/r/b409d9a17c52dc0db51faee91d92737bb7975f5b.1685637456.git.robin.murphy@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit a98ad3adf60d15011ada95e05f55fa501258eb93 Author: Gabriel Krisman Bertazi Date: Mon Jan 9 12:19:55 2023 -0300 arm64: Avoid repeated AA64MMFR1_EL1 register read on pagefault path [ Upstream commit a89c6bcdac22bec1bfbe6e64060b4cf5838d4f47 ] Accessing AA64MMFR1_EL1 is expensive in KVM guests, since it is emulated in the hypervisor. In fact, ARM documentation mentions some feature registers are not supposed to be accessed frequently by the OS, and therefore should be emulated for guests [1]. Commit 0388f9c74330 ("arm64: mm: Implement arch_wants_old_prefaulted_pte()") introduced a read of this register in the page fault path. But, even when the feature of setting faultaround pages with the old flag is disabled for a given cpu, we are still paying the cost of checking the register on every pagefault. This results in an explosion of vmexit events in KVM guests, which directly impacts the performance of virtualized workloads. For instance, running kernbench yields a 15% increase in system time solely due to the increased vmexit cycles. This patch avoids the extra cost by using the sanitized cached value. It should be safe to do so, since this register mustn't change for a given cpu. [1] https://developer.arm.com/-/media/Arm%20Developer%20Community/PDF/Learn%20the%20Architecture/Armv8-A%20virtualization.pdf?revision=a765a7df-1a00-434d-b241-357bfda2dd31 Signed-off-by: Gabriel Krisman Bertazi Acked-by: Will Deacon Reviewed-by: Anshuman Khandual Link: https://lore.kernel.org/r/20230109151955.8292-1-krisman@suse.de Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin commit aad6ba1715ecb5e9fadd45dc96c67af86f85d8d0 Author: Zheng Yejian Date: Thu Sep 21 20:54:25 2023 +0800 ring-buffer: Fix bytes info in per_cpu buffer stats [ Upstream commit 45d99ea451d0c30bfd4864f0fe485d7dac014902 ] The 'bytes' info in file 'per_cpu/cpu/stats' means the number of bytes in cpu buffer that have not been consumed. However, currently after consuming data by reading file 'trace_pipe', the 'bytes' info was not changed as expected. # cat per_cpu/cpu0/stats entries: 0 overrun: 0 commit overrun: 0 bytes: 568 <--- 'bytes' is problematical !!! oldest event ts: 8651.371479 now ts: 8653.912224 dropped events: 0 read events: 8 The root cause is incorrect stat on cpu_buffer->read_bytes. To fix it: 1. When stat 'read_bytes', account consumed event in rb_advance_reader(); 2. When stat 'entries_bytes', exclude the discarded padding event which is smaller than minimum size because it is invisible to reader. Then use rb_page_commit() instead of BUF_PAGE_SIZE at where accounting for page-based read/remove/overrun. Also correct the comments of ring_buffer_bytes_cpu() in this patch. Link: https://lore.kernel.org/linux-trace-kernel/20230921125425.1708423-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: c64e148a3be3 ("trace: Add ring buffer stats to measure rate of events") Signed-off-by: Zheng Yejian Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 8012d0b05158da2bcd2a385d943ad4903d545a28 Author: Vlastimil Babka Date: Wed Mar 15 15:24:46 2023 +0100 ring-buffer: remove obsolete comment for free_buffer_page() [ Upstream commit a98151ad53b53f010ee364ec2fd06445b328578b ] The comment refers to mm/slob.c which is being removed. It comes from commit ed56829cb319 ("ring_buffer: reset buffer page when freeing") and according to Steven the borrowed code was a page mapcount and mapping reset, which was later removed by commit e4c2ce82ca27 ("ring_buffer: allocate buffer page pointer"). Thus the comment is not accurate anyway, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz Cc: Masami Hiramatsu Cc: Ingo Molnar Reported-by: Mike Rapoport Suggested-by: Steven Rostedt (Google) Fixes: e4c2ce82ca27 ("ring_buffer: allocate buffer page pointer") Signed-off-by: Vlastimil Babka Reviewed-by: Mukesh Ojha Signed-off-by: Steven Rostedt (Google) Stable-dep-of: 45d99ea451d0 ("ring-buffer: Fix bytes info in per_cpu buffer stats") Signed-off-by: Sasha Levin commit 65a218ca516efa464d435f0e35a1fb5bb9a74082 Author: Trond Myklebust Date: Sun Sep 24 13:14:15 2023 -0400 NFSv4: Fix a state manager thread deadlock regression [ Upstream commit 956fd46f97d238032cb5fa4771cdaccc6e760f9a ] Commit 4dc73c679114 reintroduces the deadlock that was fixed by commit aeabb3c96186 ("NFSv4: Fix a NFSv4 state manager deadlock") because it prevents the setup of new threads to handle reboot recovery, while the older recovery thread is stuck returning delegations. Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 8454a2f5e9308317e63ebee9d4e183f79a8d7eb5 Author: Benjamin Coddington Date: Thu Jun 15 14:07:22 2023 -0400 NFS: rename nfs_client_kset to nfs_kset [ Upstream commit 8b18a2edecc0741b0eecf8b18fdb356a0f8682de ] Be brief and match the subsystem name. There's no need to distinguish this kset variable from the server. Signed-off-by: Benjamin Coddington Signed-off-by: Trond Myklebust Stable-dep-of: 956fd46f97d2 ("NFSv4: Fix a state manager thread deadlock regression") Signed-off-by: Sasha Levin commit f8b0b6a8e196bbcce9b22569c9821f65b3013e57 Author: Benjamin Coddington Date: Thu Apr 20 12:17:35 2023 -0400 NFS: Cleanup unused rpc_clnt variable [ Upstream commit e025f0a73f6acb920d86549b2177a5883535421d ] The root rpc_clnt is not used here, clean it up. Fixes: 4dc73c679114 ("NFSv4: keep state manager thread active if swap is enabled") Signed-off-by: Benjamin Coddington Reviewed-by: NeilBrown Signed-off-by: Anna Schumaker Stable-dep-of: 956fd46f97d2 ("NFSv4: Fix a state manager thread deadlock regression") Signed-off-by: Sasha Levin commit 686746be7bfb7e81e2c5088e1f2fa52c10249db3 Author: Sameer Pujar Date: Thu Sep 7 20:32:25 2023 +0530 ASoC: tegra: Fix redundant PLLA and PLLA_OUT0 updates [ Upstream commit e765886249c533e1bb5cbc3cd741bad677417312 ] Tegra audio graph card has many DAI links which connects internal AHUB modules and external audio codecs. Since these are DPCM links, hw_params() call in the machine driver happens for each connected BE link and PLLA is updated every time. This is not really needed for all links as only I/O link DAIs derive respective clocks from PLLA_OUT0 and thus from PLLA. Hence add checks to limit the clock updates to DAIs over I/O links. This found to be fixing a DMIC clock discrepancy which is suspected to happen because of back to back quick PLLA and PLLA_OUT0 rate updates. This was observed on Jetson TX2 platform where DMIC clock ended up with unexpected value. Fixes: 202e2f774543 ("ASoC: tegra: Add audio graph based card driver") Cc: stable@vger.kernel.org Signed-off-by: Sameer Pujar Link: https://lore.kernel.org/r/1694098945-32760-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0a210e63844bc7947e3a047b187d2dab6f9b4559 Author: Sameer Pujar Date: Thu Sep 7 20:32:24 2023 +0530 ASoC: soc-utils: Export snd_soc_dai_is_dummy() symbol [ Upstream commit f101583fa9f8c3f372d4feb61d67da0ccbf4d9a5 ] Export symbol snd_soc_dai_is_dummy() for usage outside core driver modules. This is required by Tegra ASoC machine driver. Signed-off-by: Sameer Pujar Link: https://lore.kernel.org/r/1694098945-32760-2-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit b4f7f15568134ed1e468e46f2ab0c07ea798f9f0 Author: Johan Hovold Date: Thu Jun 22 10:24:35 2023 +0200 spi: zynqmp-gqspi: fix clock imbalance on probe failure [ Upstream commit 1527b076ae2cb6a9c590a02725ed39399fcad1cf ] Make sure that the device is not runtime suspended before explicitly disabling the clocks on probe failure and on driver unbind to avoid a clock enable-count imbalance. Fixes: 9e3a000362ae ("spi: zynqmp: Add pm runtime support") Cc: stable@vger.kernel.org # 4.19 Cc: Naga Sureshkumar Relli Cc: Shubhrajyoti Datta Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/Message-Id: <20230622082435.7873-1-johan+linaro@kernel.org> Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit e514f897ad66560215f70cd3e343e43ee6dc4ca3 Author: Uwe Kleine-König Date: Fri Mar 3 18:20:41 2023 +0100 spi: zynqmp-gqspi: Convert to platform remove callback returning void [ Upstream commit 3ffefa1d9c9eba60c7f8b4a9ce2df3e4c7f4a88e ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230303172041.2103336-88-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown Stable-dep-of: 1527b076ae2c ("spi: zynqmp-gqspi: fix clock imbalance on probe failure") Signed-off-by: Sasha Levin