commit f23b568f7597f98a241454018a34361ce2523c05 Author: Greg Kroah-Hartman Date: Fri Oct 30 12:56:23 2026 +0100 Linux 5.10.273 Link: https://lore.kernel.org/r/20261028170003.522232767@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Florian Fainelli Tested-by: Dominique Martinet Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Barry K. Nathan Signed-off-by: Greg Kroah-Hartman commit b0aa6a3a8b2e91da6d3667d578ced174c288e706 Author: Christian Brauner Date: Mon Sep 21 15:44:54 2026 +0200 signal: don't retarget shared signals in a dying thread group commit c0e659511d4f49087da095a95799edb5b775a705 upstream. If the calling thread has blocked a signal then retarget_shared_pending() slingshots a shared pending signal to a sibling thread. Today it only skips PF_EXITING threads but not a coredumping thread. But if SIGNAL_GROUP_EXIT is set no thread in the thread-group can dequeue such signals anymore as get_signal() sends SIGKILL to every thread and prepare_signal() drops any other signal. exit_signals() also returns early on SIGNAL_GROUP_EXIT. But neither sigprocmask() nor the mask restore in sigtimedwait() do. Say a thread sleeps in sigtimedwait() and a sibling thread crashes. The sleeping thread gets woken by the zap call. It restores its mask on the way out and retargets a signal that was queued for the coredumping process. That means TIF_SIGPENDING is set on the coredumping task which zap_threads() had cleared. So a blocking write sees TIF_SIGPENDING and truncates the dump. Stop retargeting signals when SIGNAL_GROUP_EXIT is set and avoid needlessly truncating coredumps. Fixes: e6fa16ab9c1e ("signal: sigprocmask() should do retarget_shared_pending()") Cc: stable@vger.kernel.org Acked-by: Oleg Nesterov Link: https://patch.msgid.link/20260921-work-coredump-fixes-v3-5-8e4adb1619e6@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit c7956ec99ad0e173720d95de9fa788bb077809f2 Author: Adrian Martinez Date: Sat Oct 10 23:40:00 2026 +0300 KEYS: Fix key_reject_and_link() race with keyring restriction commit 0b157166e612b70f98a332b6c7be7eac6f8e9593 upstream. The restrict_link check in key_reject_and_link() is done before taking the keyring semaphore, racing with a concurrent keyring_restrict() that installs the restriction while holding the semaphore in write mode. Move the check to after __key_link_lock(), so it is done under the semaphore, matching the pattern used in __key_create_or_update(). Cc: stable@vger.kernel.org Fixes: 5ac7eace2d00 ("KEYS: Add a facility to restrict new links into a keyring") Reviewed-by: Jarkko Sakkinen Signed-off-by: Adrian Martinez Link: https://lore.kernel.org/r/CACO1+RT+m==BY+ZPkE+fo536D0qu3wog4xE1dfuXQ56g+=Qv=A@mail.gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit e5f830ae6611cddbfc504c43f14155f60b63206a Author: Cen Zhang Date: Mon Oct 19 22:57:21 2026 +0800 keys: Protect the read method check against type removal commit 925c84e3cc21caf09de92d9bcafab0147790debf upstream. keyctl_read_key() checks key->type->read without holding key->sem. A reference keeps the key alive, but does not pin the module containing its type. A surviving RxRPC key can therefore be read while AF_RXRPC is being unloaded: KEYCTL_READ task Module unload and key GC ---------------- ------------------------ lookup_user_key() permission / possession checks load key->type af_rxrpc_exit() unregister_key_type() GC: down_write(key->sem) GC: retype to key_type_dead GC: up_write(key->sem) unregister_key_type() returns free_module() read saved type's read member The final access can read freed module storage. The read invocation in __keyctl_read_key() is already protected by key->sem, but the earlier method check is outside that critical section. Move the method check into __keyctl_read_key(), after key_validate() and under its existing read hold on key->sem. The check and invocation then use the same protected type for length queries and every read retry. The GC cannot retype the key until the semaphore is released, and type unregistration waits for that GC pass before the module can be freed. Return -EOPNOTSUPP when validation succeeds and the type has no read method. A temporary buffer may now be allocated before this result; allocation and copying to userspace remain outside the semaphore. Assisted-by: LLM Cc: stable@vger.kernel.org # v5.10+ Fixes: d3ec10aa9581 ("KEYS: Don't write out to userspace while holding key semaphore") Suggested-by: Jarkko Sakkinen Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Reviewed-by: David Howells Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0010-v7-fc85721ff5cfb9e33ac6@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 9ebe824d55983c9f063a2c9ef1a08b29812d406f Author: Kyle Zeng Date: Tue Oct 13 16:12:51 2026 -0700 keys: make keyring indexes independent of kernel addresses commit de891c73c1cf41ac8de12c07fa2c84d6a912ad0c upstream. KEYCTL_READ returns the serial numbers in a keyring in associative-array traversal order. The first word of the index is a public, deterministic hash of the type pointer, domain pointer and description. An unprivileged user can therefore insert keys with known descriptions, predict their order for each possible KASLR slide, and recover the kernel image address. On an x86-64 build with 16 MiB alignment, 45 user keys suffice to distinguish the candidate slides. Remove the addresses from the whole index, not just its first hash word. Assign each key type and domain a nonzero 64-bit ID and hash those IDs and the description with a once-initialized SipHash key. Use the full IDs in the later index chunks as well. Truncating or hashing the IDs there would lose the guarantee that distinct type/domain/description tuples have a differing index bit. Allocate IDs lazily since private key types need not be registered. Cache them in the index key so tree walks and copies of an existing index do not need to dereference a type descriptor that may have been unregistered. Keep the 32-bit chunk layout and diff_objects() bit offsets consistent, and retain the separate root slot for keyrings used by recursive search. The key comparison, permissions and userspace data format are unchanged; only the address-dependent in-memory ordering is replaced. Cc: stable@vger.kernel.org Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Assisted-by: Codex:gpt-6-astra Signed-off-by: Kyle Zeng Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20261013231251.56170-1-kylebot@openai.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 19c4de819e52b7f606468fbfe4fcef4e812e2777 Author: Cen Zhang Date: Fri Oct 9 13:11:03 2026 +0800 keys: Protect the type name while describing a key commit fced7238b7e80cf8aa688d5af976e4aa6e33c329 upstream. keyctl_describe_key() must keep the key type's name alive until kasprintf() has consumed it. The retained key reference keeps the key and its description alive, but does not pin the module providing its type. The name is passed to kasprintf() without holding key->sem. kvasprintf() uses the saved name pointer in two formatting passes, with a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that passes View permission before type retirement can overlap a privileged module unload in this order: 1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the kasprintf() arguments and completes the first formatting pass. 2. While the formatter is delayed before its second pass, af_rxrpc_exit() calls unregister_key_type(), which removes the type from the registry and waits for key_gc_keytype(). 3. The collector takes key->sem for writing, retypes the retained key to key_type_dead and completes retirement. Unregistration and module exit return, allowing free_module() to release the type and name. 4. The formatter resumes its second pass and reads the saved name from released module storage, which can fault in string(). Hold key->sem for reading across kasprintf(). The collector then cannot retype the key or complete retirement until both formatting passes have finished. If retirement wins the lock first, formatting uses the core key_type_dead name instead. Release the semaphore immediately after kasprintf(), including on allocation failure, before copying to userspace. Oops report as below: BUG: unable to handle page fault for address: fffffbfff8054794 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:string+0x23f/0x470 Call Trace: vsnprintf+0x330/0x1110 Cc: stable@vger.kernel.org Fixes: aa9d4437893f ("KEYS: Fix the size of the key description passed to/from userspace") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0009-v4-6b537c5732fd957c33fa@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 14fb6fad526b35a7ebd121f1dd313abe652e0aa6 Author: Cen Zhang Date: Fri Oct 9 13:52:16 2026 +0800 keys: Check the authorization payload in process keyring searches commit 0a0ec45bf577a9b4d4960567f20d3877ef480de9 upstream. An authorization payload and its saved credentials must remain valid while search_process_keyrings_rcu() searches the requestor's keyrings. The function validates the authorization key, then separately loads payload.data[0] and unconditionally reads rka->cred. Validation does not prevent request_key_auth_revoke() from clearing the payload. A request-key helper can assume authority and fork a descendant that inherits the authorization key. If the descendant misses in its own keyrings, it falls back to the saved requestor credentials. Successful target instantiation invalidates the authorization key without clearing the payload. After the helper exits, UMH_WAIT_PROC returns to the requester, which calls complete_request_key() and revokes that key. With the descendant paused after validation, the paths can interleave as follows: 1. The descendant enters search_process_keyrings_rcu() under RCU and key_validate() succeeds. 2. The helper instantiates the target, invalidates the authorization key, and exits. 3. The requester resumes from UMH_WAIT_PROC, calls complete_request_key(), and revokes the authorization key. request_key_auth_revoke() sets its payload pointer to NULL. 4. The descendant loads NULL and dereferences rka->cred. This NULL dereference can oops the kernel. RCU delays payload disposal but does not prevent the pointer from being cleared. Load the payload with dereference_key_rcu() and require a non-NULL result before validating the authorization key and searching its saved credentials. A non-NULL payload and its credentials remain alive for the caller's RCU read-side section; a cleared payload skips the fallback search and follows the existing error selection. KASAN report as below: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:search_process_keyrings_rcu+0x32b/0x790 Cc: stable@vger.kernel.org Fixes: e59428f721ee ("keys: Move the RCU locks outwards from the keyring search functions") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0004-v3-598361863b76bc25d58d@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 77249d4b1bb5ad43552b7023c4a0978937aa7a56 Author: Cen Zhang Date: Fri Oct 9 13:11:59 2026 +0800 keys: Avoid the owner account dereference in named keyring lookup commit 51409aaa01f8602552c336009fd22b226b0cdf1d upstream. Named keyring lookup must keep the storage containing the owner UID alive through the namespace mapping check. find_keyring_by_name() reads keyring->user->uid under keyring_name_lock, but that lock protects the keyring's name entry and allocation, not its separate key_user. A named session-keyring join can overlap a privileged KEYCTL_CHOWN on another CPU. If the keyring holds the last reference to its old dynamic key_user and the ownership transfer succeeds, the following ordering is possible: Named join Chown find_keyring_by_name() keyctl_chown_key() read_lock(keyring_name_lock) down_write(key->sem) load old keyring->user replace key->user and key->uid up_write(key->sem) key_put(key) key_user_put(old user): free read old user->uid read_unlock(keyring_name_lock) Chown neither takes keyring_name_lock nor key_session_mutex, so it can free the old account between the pointer load and the UID read. The lookup then reads freed memory even though the keyring itself is alive. Use keyring->uid for the mapping check. key_alloc() initializes this inline owner UID and keyctl_chown_key() updates it on chown. The existing name lock keeps its containing keyring allocated throughout the check, so lookup no longer depends on the account's lifetime. This also matches the owner UID used by the permission check. KASAN report as below: BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0 Read of size 4 at addr ffff8881128ae2ec by task keycase/500 Cc: stable@vger.kernel.org Fixes: 2ea190d0a006 ("keys: skip keys from another user namespace") Assisted-by: LLM Signed-off-by: Cen Zhang Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/pm-key-management-objects-candidate-0002-v3-2baa8cad2bb554364e10@gmail.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 389f28e13d2bf04030bb10e0c4313935ddf202f0 Author: Donggeun Yoo Date: Thu Sep 17 10:55:32 2026 +0900 tracing: Fix 64-bit and signed histogram fields on 32-bit kernels commit 443d23176812803d0fa182b8d05ef066a7b8271f upstream. DEFINE_HIST_FIELD_FN() reads a trace event field and widens it to the u64 the histogram uses as a key or a value: type *addr = (type *)(event + hist_field->field->offset); return (u64)(unsigned long)*addr; unsigned long is 32 bits on a 32-bit kernel, so the intermediate cast discards the upper half of a 64-bit field, and widens a signed field by zero extension from 32 bits rather than sign extension from its own width. Five of the eight instantiations are wrong there: s64, u64, s32, s16 and s8. The cast came in with commit 79e577cbce4c ("tracing: Support string type key properly"), which also added hist_field_dynstring() and hist_field_pstring(). Those convert a char * to u64 and do warn without an unsigned long in between on 32-bit. DEFINE_HIST_FIELD_FN() converts an integer and never a pointer, so it gains nothing from the cast and only loses information. Drop the intermediate cast and let the usual arithmetic conversions widen *addr according to its own type. unsigned long is 64 bits on LP64, so the two forms are identical there and 64-bit kernels are unaffected. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260917015532.103081-1-donggeunyoo.kernel@gmail.com Fixes: 79e577cbce4c ("tracing: Support string type key properly") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/all/20260914054614.82A9B1F000FF@smtp.kernel.org/ Signed-off-by: Donggeun Yoo Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit f21351d1c4cdcc6a68f03636a407c2af1a5e1e10 Author: Donggeun Yoo Date: Mon Sep 14 19:40:36 2026 +0900 tracing: Unregister field variable histograms when the command fails commit 91c14d6c13096091c56304120aaa26e479130b8b upstream. An action that names a field on another event needs that field as a variable, so create_field_var_hist() registers a second hist trigger on that event to provide it, and records it in target_hist_data->field_var_hists[]. If a later part of the same command fails, create_actions() returns an error and event_hist_trigger_parse() jumps to out_free. The write fails with -EINVAL and sched_switch gets no trigger, but: # echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \ events/sched/sched_waking/trigger # echo 'my_synth u64 lat; int a; int b' >> synthetic_events # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\ onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\ >> events/sched/sched_switch/trigger # cat events/sched/sched_waking/trigger hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active] hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active] The second histogram is the one created for 'prio'. It is still active and still counting. out_free reaches destroy_field_var_hists(), which frees the field_var_hists[] entries, but never unregister_field_var_hists(), which is what removes the triggers and runs only from event_hist_trigger_free(). The entry is freed and the trigger is left with nothing tracking it. Unregister the field variable histograms in out_free as well, and record each one as soon as its trigger is registered rather than after the lookup that follows it, so no exit can leave a registered trigger untracked. The entry then belongs to field_var_hists[] and is released by destroy_field_var_hists(), so freeing it on that exit would be a double free. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260914104036.1768529-1-donggeunyoo.kernel@gmail.com Fixes: 02205a6752f2 ("tracing: Add support for 'field variables'") Reported-by: sashiko-bot@kernel.org Closes: https://lore.kernel.org/all/20260913204302.DB2551F000FF@smtp.kernel.org/ Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit a6165126b1a1b26342b55be6eb6ee23af8756aba Author: Donggeun Yoo Date: Tue Sep 15 08:47:54 2026 +0900 tracing: Save the event file instead of the compatible histogram commit d5c42664fc094899af9aae5300b27fe8fdb658ef upstream. create_field_var_hist() creates a histogram on the matched event to supply a field variable, and records it on the target so it can be torn down later: hist_data = find_compatible_hist(target_hist_data, file); ... /* Save the compatible histogram information */ var_hist->hist_data = hist_data; hist_data is not the histogram it creates. It is one that was already there, whose keys the new one copies. The saved pointer has a single user, unregister_field_var_hists(), which runs when the target is removed: file = hist_data->field_var_hists[i]->hist_data->event_file; find_compatible_hist() matches on keys alone, so it can pick one with no variables of its own. check_var_refs() then returns false and the user can remove it while the target still points at it: BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320 Read of size 8 at addr ffff8880093b90e0 by task init/1 Freed by task 1: kfree+0x154/0x420 event_hist_trigger_free+0x1d5/0x320 event_hist_trigger_parse+0x35f3/0x69e0 trigger_process_regex+0x1a6/0x250 Save the event file instead. It is all the dereference ever wanted, and it does not go away when the user removes a trigger. Cc: stable@vger.kernel.org Reported-by: Sashiko Link: https://lore.kernel.org/all/20260914110753.221E61F000FF@smtp.kernel.org/ Link: https://patch.msgid.link/20260914234754.3676905-1-donggeunyoo.kernel@gmail.com Fixes: 02205a6752f2 ("tracing: Add support for 'field variables'") Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Acked-by: Tom Zanussi Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 4a1a6d35359991c5d47f4bf101cfbe1475c94093 Author: Kyle Zeng Date: Fri Oct 23 10:46:20 2026 -0700 tracing: Reject incomplete event filter expressions commit 1fdc4164e488916402badddbb1f51e9380dabb91 upstream. A non-empty expression normally finishes in predicate_parse()'s inner loop, which resolves the pending logical operators before jumping to finalization. If the input ends after an operator, possibly followed by unary '!' tokens, the outer loop instead falls through with unresolved operator state. For example, "common_pid == 1 || common_pid == 2 &&" leaves prog[0].target equal to -1. The second pass then reads prog[-1] before the forward-jump check can reject it. Depending on adjacent slab contents, it can also copy an out-of-bounds word into a branch target that passes the forward-only check. A self-targeted perf tracepoint counting event can reach this path through PERF_EVENT_IOC_SET_FILTER. Reject the outer-loop fallthrough when a predicate has already been parsed. This ensures that non-empty expressions only reach finalization after the inner loop has resolved their operators. Keep the existing no-filter error for input that has no predicates. Add a regression test for trailing logical operators and unary negations. Fixes: 80765597bc587 ("tracing: Rewrite filter logic to be simpler and faster") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261023174620.91969-1-kylebot@openai.com Assisted-by: Codex:gpt-6-astra Acked-by: Masami Hiramatsu (Google) Tested-by: JongHyuk Kim(MalHyuk) Signed-off-by: Kyle Zeng Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 85cc289eb08afa975375f838187369e68b429ee0 Author: Pauli Virtanen Date: Tue Oct 27 10:02:40 2026 +0000 Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn [ Upstream commit 86b55991d3cd690e73c5ef8d20b75ae4905b357a ] l2cap_chan may be linked to l2cap_conn at most once. This is assumed in several places, eg l2cap_chan_del cleanup. There is a TOCTOU race where the invariant is violated: [Task 1] [Task 2] l2cap_chan_connect l2cap_sock_bind l2cap_chan_lock lock_sock l2cap_state_change if (sk->sk_state != BT_OPEN) chan->state = BT_CONNECT l2cap_sock_state_change_cb chan->state = BT_BOUND sk->sk_state = BT_BOUND lock_sock <------------------ release_sock sk->sk_state = BT_CONNECT l2cap_sock_connect() does not check sk->sk_state, so since chan->state is now BT_BOUND, subsequent connect() ends up with second __l2cap_chan_add. Explicitly document and check the invariant in __l2cap_chan_add with WARN_ON_ONCE. The only callsite where it could be hit is l2cap_chan_connect, so add pre-check there to avoid relying on chan->state. chan->state read/write is not properly guarded currently so there can be other TOCTOUC problems. Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. Fixes: b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") Assisted-by: deepseek-4-flash # finding the race condition Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz [Lee: Resolve context conflict around mutex_lock(&conn->chan_lock) prior to commit 56c2b5831d39 ("Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect")] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit c66cd500ba1a58b3798c468fcc774ed2c8c2ec7d Author: Pauli Virtanen Date: Tue Oct 27 10:02:39 2026 +0000 Bluetooth: L2CAP: access chan->conn safely in get/setsockopt [ Upstream commit ca2c4c26498643f421d35ffe258fafbd3ed461c3 ] Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields. Fixes: b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") Reported-by: syzbot+b106284c2a0b7bc80cf9@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b106284c2a0b7bc80cf9 Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz [Lee: Omit sockopt_t conversion from commit bf01627cc04b ("Bluetooth: L2CAP: convert to getsockopt_iter")] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 0dd10d2ad0a15f1b4a5bd370bb05931504bbec1a Author: Jonas Köppeler Date: Mon Mar 23 18:49:20 2026 +0100 net_sched: codel: fix stale state for empty flows in fq_codel [ Upstream commit 815980fe6dbb01ad4007e8b260a45617f598b76d ] When codel_dequeue() finds an empty queue, it resets vars->dropping but does not reset vars->first_above_time. The reference CoDel algorithm (Nichols & Jacobson, ACM Queue 2012) resets both: dodeque_result codel_queue_t::dodeque(time_t now) { ... if (r.p == NULL) { first_above_time = 0; // <-- Linux omits this } ... } Note that codel_should_drop() does reset first_above_time when called with a NULL skb, but codel_dequeue() returns early before ever calling codel_should_drop() in the empty-queue case. The post-drop code paths do reach codel_should_drop(NULL) and correctly reset the timer, so a dropped packet breaks the cycle -- but the next delivered packet re-arms first_above_time and the cycle repeats. For sparse flows such as ICMP ping (one packet every 200ms-1s), the first packet arms first_above_time, the flow goes empty, and the second packet arrives after the interval has elapsed and gets dropped. The pattern repeats, producing sustained loss on flows that are not actually congested. Test: veth pair, fq_codel, BQL disabled, 30000 iptables rules in the consumer namespace (NAPI-64 cycle ~14ms, well above fq_codel's 5ms target), ping at 5 pps under UDP flood: Before fix: 26% ping packet loss After fix: 0% ping packet loss Fix by resetting first_above_time to zero in the empty-queue path of codel_dequeue(), matching the reference algorithm. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Fixes: d068ca2ae2e6 ("codel: split into multiple files") Co-developed-by: Jesper Dangaard Brouer Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Jonas Köppeler Reported-by: Chris Arges Tested-by: Jonas Köppeler Reviewed-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/all/20260318134826.1281205-7-hawk@kernel.org/ Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260323174920.253526-1-hawk@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 25841e8d4241c6c3763e70ae95050f8108707b46 Author: Pablo Neira Ayuso Date: Sun Oct 25 16:32:24 2026 +0100 netfilter: nf_tables: unconditionally bump set->nelems before insertion [ Upstream commit def602e498a4f951da95c95b1b8ce8ae68aa733a ] In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. Fixes: 35d0ac9070ef ("netfilter: nf_tables: fix set->nelems counting with no NLM_F_EXCL") Reported-by: Inseo An Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal [ Backport to 5.10.y: applies on top of d4b7f29eb85c ("netfilter: nf_tables: always increment set element count"), as in 6.1.y. 5.10 has neither the nft_set_maxsize() helper (8d738c1869f6) nor the NFT_SET_ELEM_CATCHALL element class, so the ceiling is the same expression the prerequisite inlines, set->size ? set->size + set->ndeact : UINT_MAX, and every element is counted. On the full-set path the element is left in the transaction and unwound by the abort path, which removes it, decrements nelems and frees it only after synchronize_rcu(), instead of the in-place set->ops->remove() this replaces. The update-path hunk from the upstream commit does not apply: 5.10 has no in-place element-update path here. ] Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Steffen Pfendtner Signed-off-by: Sasha Levin commit 2f53376ba114ee28cd0c8dd71caf283ca868a151 Author: Florian Westphal Date: Sun Oct 25 16:32:23 2026 +0100 netfilter: nf_tables: always increment set element count [ Upstream commit d4b7f29eb85c93893bc27388b37709efbc3c9a0e ] At this time, set->nelems counter only increments when the set has a maximum size. All set elements decrement the counter unconditionally, this is confusing. Increment the counter unconditionally to make this symmetrical. This would also allow changing the set maximum size after set creation in a later patch. Signed-off-by: Florian Westphal [ Backport to 5.10.y: 5.10 has no NFT_SET_ELEM_CATCHALL element class, so the catch-all exclusion from the upstream commit is dropped and every element is counted. ] Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Steffen Pfendtner Signed-off-by: Sasha Levin commit 060d83bb6147c36fc21134d5b332d266b8c176bc Author: Xiang Mei Date: Sun Oct 25 09:45:05 2026 +0100 net: bonding: fix use-after-free in bond_xmit_broadcast() [ Upstream commit 2884bf72fb8f03409e423397319205de48adca16 ] bond_xmit_broadcast() reuses the original skb for the last slave (determined by bond_is_last_slave()) and clones it for others. Concurrent slave enslave/release can mutate the slave list during RCU-protected iteration, changing which slave is "last" mid-loop. This causes the original skb to be double-consumed (double-freed). Replace the racy bond_is_last_slave() check with a simple index comparison (i + 1 == slaves_count) against the pre-snapshot slave count taken via READ_ONCE() before the loop. This preserves the zero-copy optimization for the last slave while making the "last" determination stable against concurrent list mutations. The UAF can trigger the following crash: ================================================================== BUG: KASAN: slab-use-after-free in skb_clone Read of size 8 at addr ffff888100ef8d40 by task exploit/147 CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY Call Trace: dump_stack_lvl (lib/dump_stack.c:123) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108) bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334) bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593) dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887) __dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838) ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136) ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219) ip6_output (net/ipv6/ip6_output.c:250) ip6_send_skb (net/ipv6/ip6_output.c:1985) udp_v6_send_skb (net/ipv6/udp.c:1442) udpv6_sendmsg (net/ipv6/udp.c:1733) __sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206) __x64_sys_sendto (net/socket.c:2209) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Allocated by task 147: Freed by task 147: The buggy address belongs to the object at ffff888100ef8c80 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 192 bytes inside of freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60) Memory state around the buggy address: ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 4e5bd03ae346 ("net: bonding: fix bond_xmit_broadcast return value error bug") Reported-by: Weiming Shi Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260326075553.3960562-1-xmei5@asu.edu Signed-off-by: Paolo Abeni [ Backport to 5.10.y: 5.10's bond_xmit_broadcast() walks the live slave list, not the all_slaves array upstream indexes into (that walk came with ce7a381697cb "net: bonding: add broadcast_neighbor option for 802.3ad"), so there is no index/count pair that stays consistent while the list changes. Instead of choosing the "last" slave up front, defer it: clone the skb for each up slave as the next one is found, and transmit the original skb to the last up slave seen only after the walk has finished. The original skb is consumed exactly once and not touched afterwards, however the list changes during the RCU walk; slave pointers stay valid under rcu_read_lock() since __bond_release_one() does synchronize_rcu() before freeing. ] Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Steffen Pfendtner Signed-off-by: Sasha Levin commit 16468281da17263095bd1906cf2d16a972f10791 Author: Yun Zhou Date: Thu Oct 22 18:03:29 2026 -0400 xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf [ Upstream commit 41a28c865d1d5843f8cb9e0af17a8f4d9e2961ff ] xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous xfs_trans_commit(), which flushes the CIL push workqueue internally. If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to lock these buffers to fail them, causing a deadlock: setlabel: holds buf lock -> flush_workqueue(xfs-cil) CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf) Remove the xfs_trans_bhold() calls so that commit releases the buffer locks normally. After the sync commit, re-acquire the buffers via mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback. Fixes: f7664b31975b ("xfs: implement online get/set fs label") Reported-by: syzbot+837bcd54843dd6262f2f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=837bcd54843dd6262f2f Cc: stable@vger.kernel.org Signed-off-by: Yun Zhou Reviewed-by: Christoph Hellwig Signed-off-by: Carlos Maiolino [ sashal: Omitted realtime superblock changes because xfs_sync_sb_buf() lacks realtime superblock support. ] Signed-off-by: Sasha Levin commit 94902a6ab231cbba8975653769dcfee6fc7efc33 Author: Frank Sorenson Date: Thu Oct 22 18:05:27 2026 -0400 cifs: add revalidation on FSCTL failure in smb2_duplicate_extents() [ Upstream commit 53676a5e28231186c9f56d87b7998b640699bc15 ] smb2_duplicate_extents() has no handling for FSCTL_DUPLICATE_EXTENTS_TO_FILE failure: when the FSCTL fails, local inode metadata may be stale from the pre-extension or from concurrent remote writes, but is never refreshed. Force revalidation on FSCTL failure and use i_size_read() for the pre-extension check. Fixes: cfc63fc8126a ("smb3: fix cached file size problems in duplicate extents (reflink)") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Signed-off-by: Paulo Alcantara [ sashal: replaced cifs_invalidate_cache() with fscache_invalidate() guarded by CONFIG_CIFS_FSCACHE ] Signed-off-by: Sasha Levin commit f41a224b3c9d66c7b59afc7cae02a8b214f3c684 Author: Ben Cressey Date: Thu Oct 22 15:10:12 2026 -0400 dm-integrity: fix infinite loop on discard with large tag size [ Upstream commit 18d80c77b4c7dd20699e81cedfbbff4e9d198f28 ] When integrity_metadata handles a discard, it fills a buffer with DISCARD_FILLER and writes it over the tags, max_blocks blocks at a time. If the kmalloc fails, the buffer is the on-stack array checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size is never decremented and the loop never terminates. Fix this by using sizeof(checksums_onstack) as max_size. The array has MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a crash with unusually large tag size"), so max_blocks is at least 1. Fixes: 84597a44a9d8 ("dm integrity: add optional discard support") Cc: stable@vger.kernel.org Reviewed-by: Jose Fernandez (Anthropic) Signed-off-by: Ben Cressey Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka [ sashal: adjusted context to match the discard handler without extra_space accounting ] Signed-off-by: Sasha Levin commit 0e396088fa5c1f96ff43de29c2a2f8807078723d Author: Dibin Moolakadan Subrahmanian Date: Thu Oct 22 12:26:53 2026 -0400 drm/i915/dmc: Harden DMC firmware payload parsing [ Upstream commit 8bb1858db453cd4250e3b633f5d2d09206024ca6 ] Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.") Cc: stable@vger.kernel.org Assisted-by: Claude-Code:Sonnet-5 Signed-off-by: Dibin Moolakadan Subrahmanian Reviewed-by: Mitul Golani Signed-off-by: Ankit Nautiyal Link: https://patch.msgid.link/20260922133535.3180973-5-dibin.moolakadan.subrahmanian@intel.com (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef) Signed-off-by: Joonas Lahtinen [ sashal: adapted parse_dmc_fw_header() changes to the existing parse_csr_fw_dmc() implementation ] Signed-off-by: Sasha Levin commit 096b5d4b80d19b1f7bf8e63fae0d0a32dbb6e1a2 Author: Jann Horn Date: Thu Oct 22 10:11:00 2026 -0400 futex: Fix mm reuse handling for FUT_OFF_MMSHARED [ Upstream commit 3267512ad1c2cc0c7768c5b014dc2cceb398a801 ] A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM. It is possible for a process to wait on a shared futex with a different MM because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED futex by another process. This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume wakeups intended for a newly allocated MM at the same address. Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID. Leave private futexes as before to avoid influencing the performance of the hotpath. (Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by setting clear_child_tid such that it points into anonymous memory, which causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) Fixes: 222993395ed3 ("futex: Remove pointless mmgrap() + mmdrop()") Closes: https://lore.kernel.org/r/CAG48ez0dLBpc3QtbAhMMVNHwHL94iHh2G+h-=BVFR4dDuzZr1g@mail.gmail.com/ Signed-off-by: Jann Horn Signed-off-by: Peter Zijlstra (Intel) Link: https://patch.msgid.link/20260929-futex-mmshared-fix-v1-1-262b1ffeb3d0@google.com Cc: stable@vger.kernel.org [ sashal: Moved futex unique-ID storage from futex_mm_data directly into mm_struct. ] Signed-off-by: Sasha Levin commit e48754da403f61a347d2198fd8b50111319b3a52 Author: Wentao Liang Date: Thu Oct 22 10:09:18 2026 -0400 i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe() [ Upstream commit aaabefc79b0ff0018e8e3832169bbe359d0551fc ] In wmt_i2c_probe(), i2c->clk is acquired using of_clk_get(). If any subsequent operation fails or when the module is unloaded, the clock reference count is never decremented via clk_put(), leading to a resource leak. Switch to devm_clk_get() so that the clock is automatically managed and released. Fixes: 560746eb79d3 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20260916070631.1965713-1-vulab@iscas.ac.cn [ sashal: adapted i2c->clk references to i2c_dev->clk ] Signed-off-by: Sasha Levin commit be331b23c650de9518f8266b901d8abb9b36af77 Author: Jun Yang Date: Thu Oct 22 18:04:00 2026 -0400 net: bridge: mcast: don't truncate the port group walk on teardown [ Upstream commit 5a3f7a683aee56e1f15c9d53041f3236767eaae7 ] __br_multicast_disable_port_ctx() and br_multicast_del_port() walk port->mglist with hlist_for_each_entry_safe(). However, br_multicast_find_del_pg() can also delete other entries from the same list through br_multicast_fwd_src_remove() or __fwd_del_star_excl(). If such an entry is the iterator's saved next node, hlist_del_init() clears its ->next and terminates the walk early. The reproducer triggers this in both teardown walks, leaving port groups in the bridge mdb with a dangling ->key.port after del_nbp() frees the port: BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320 __mdb_fill_info+0x1191/0x1320 br_mdb_dump+0x594/0xe40 rtnl_mdb_dump+0x1cf/0x5d0 Use hlist_del_init_rcu() to unlink the group while preserving ->next. br_multicast_del_pg() and the teardown walks run under br->multicast_lock. The GC worker must acquire the same lock before detaching the group for destruction, so the node remains alive while the walk uses the preserved pointer. Preserving ->next means a walk can now reach a group that an earlier iteration already deleted as a side effect. That group is off mp->ports, so br_multicast_find_del_pg() would fall through its port scan and hit the trailing WARN_ON(1). Skip such groups at the top of that helper: a port group is put on port->mglist when it is created and only unlinked when it is deleted, so hlist_unhashed() identifies exactly this case. Fixes: b08123684bd5 ("net: bridge: mcast: install S,G entries automatically based on reports") Cc: stable@vger.kernel.org Suggested-by: Nikolay Aleksandrov Reported-by: TencentOS Corvus AI Signed-off-by: Jun Yang Reviewed-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260831111330.199543-1-junvyyang@tencent.com Signed-off-by: Jakub Kicinski [ sashal: Applied the br_multicast_del_pg() change to the existing __br_multicast_del_pg() helper. ] Signed-off-by: Sasha Levin commit e8f211a37396f1684af9ac81b3fc53538eb9c2f7 Author: Ido Schimmel Date: Thu Oct 22 19:31:05 2026 -0400 ipv4: udp: Create exceptions before socket matching [ Upstream commit 4c3499f79f8c7e8561266bcc220a18538cec0458 ] Currently, when ICMP Fragmentation Needed and Redirect Message packets are locally delivered and quote a UDP packet, a FIB nexthop exception (FNHE) is only created if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the FNHE cache in order to discover the ephemeral port used by a connected UDP socket. Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the FNHE cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating a FNHE, even before trying to find a matching socket. Do that by calling ipv4_update_pmtu() and ipv4_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) from an off-path attacker will always result in a FNHE being created or updated in the cache that the attacker can observe. Pass an oif of 0, in a similar fashion to icmp_err(). This is also the oif used by the socket path for sockets that are not bound to a device. Note that this does not allow attackers to create FNHEs that they could not create before, as both helpers can already be reached with little to no validation. For example, by sending an ICMP error that quotes an ICMP Echo Reply or one that quotes a UDP source port that matches a wildcard socket. Also note that in the good case (matched socket) the above scheme comes at the cost of an extra route lookup, as the no socket helpers perform their own lookup before the one performed by ipv4_sk_update_pmtu() / ipv4_sk_redirect(). When the two resolve to different nexthops, it also results in two exceptions being created for the same destination IP. One in the FNHE cache of the nexthop resolved by the no socket helpers and another in the FNHE cache of the nexthop used by the socket. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Cc: stable@vger.kernel.org Reported-by: Amit Klein Reported-by: Noam Caspi Signed-off-by: Ido Schimmel Reviewed-by: David Ahern Link: https://patch.msgid.link/20260828192344.2596928-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski [ sashal: inlined udp_err_update_exception() logic in the existing udp_err() wrapper. ] Signed-off-by: Sasha Levin commit 05ca3ce6a58dadd40f4f3916553dd82858a84159 Author: Chen Cheng Date: Thu Oct 22 18:03:39 2026 -0400 dm-integrity: require stable writes for internal hash modes [ Upstream commit b2fd92f016e9d692fd3c8c08d0ee014e9212279d ] dm-integrity direct, bitmap and inline internal-hash modes compute integrity tags from the pages carried by the write bio. The lower data write also uses those pages, so the tag and the data write depend on the same memory contents staying unchanged while writeback is in flight. Without stable writes, a buffered writer can modify a writeback folio after dm-integrity has submitted the data bio and before the lower device has consumed the data. After a crash, this can leave data from the later contents with a tag calculated from the earlier contents, causing permanent checksum failures on read. Set BLK_FEAT_STABLE_WRITES for internal-hash D, B and I modes so filesystems wait for writeback folios to become stable before modifying them again. Journal mode is left unchanged because it copies data into the journal before computing and persisting the tag. Tested using dm-delay over a virtio-blk test disk, dm-integrity internal_hash:crc32c and no-journal ext4. The D and B reproducers both failed with checksum errors before this change and completed with READ_RC=0 and zero mismatches after it. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org Reported-by: Sun Yangkai Link: https://github.com/chencheng-fnnas/reproducer/blob/main/dm-integrity-writeback-race.py Signed-off-by: Chen Cheng Signed-off-by: Mikulas Patocka [ sashal: Replaced BLK_FEAT_STABLE_WRITES with a per-target needs_stable_writes bit propagated through the existing queue-flag machinery. ] Signed-off-by: Sasha Levin commit 29538fb3f412f3ce5ad9f97fe7fd84952dacd3af Author: Pablo Neira Ayuso Date: Sat Oct 24 14:49:31 2026 +0200 netfilter: nf_tables: release flowtable after rcu grace period on error [ Upstream commit d73f4b53aaaea4c95f245e491aa5eeb8a21874ce ] Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks. Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Reported-by: Yiming Qian Signed-off-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal [ Backport to 5.10.y: 5.10 registers the flowtable hooks before the transaction is allocated and has no err_flowtable_hooks label. As in the 5.15.y backport of this fix, call synchronize_rcu() in the nft_register_flowtable_net_hooks() failure branch, before the hooks and the flowtable are released. ] Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Steffen Pfendtner Signed-off-by: Sasha Levin commit 79d8c89baa10612c1675972a632c65cdbe0936f6 Author: Usama Arif Date: Sat Oct 24 16:38:57 2026 +0800 mm/huge_memory: transfer the pmd dirty bit to the folio on zap [ Upstream commit fe6cf984939d8e12cb33a99673c8d026c5135e68 ] zap_huge_pmd_folio() propagates the pmd young bit to the folio for the file case, but not the dirty bit. The pte path does propagate it, in zap_present_folio_ptes() and so does the pmd split path, in __split_huge_pmd_locked(). For most file mappings the omission is harmless, because writing to a shared file mapping goes through page_mkwrite(), which dirties the folio. tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify() is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault(). do_read_fault() does not call fault_dirty_shared_page(), so subsequent stores through that mapping set only the hardware dirty bit in the pmd and never call folio_mark_dirty(). A shmem folio allocated by a fault is marked uptodate but not dirty (see the clear: block in shmem_get_folio_gfp()), so PG_dirty is never set at all. Unmapping such a folio - munmap(), or exit_mmap() when the process dies - then loses the only record that it was written, because zap_huge_pmd() drops the pmd without transferring the dirty bit. Reclaim afterwards sees a clean shmem folio: the whole swap-out block in shrink_folio_list() is inside "if (folio_test_dirty(folio))", so pageout() is skipped and the folio falls into __remove_mapping(). There, folio_is_file_lru() is false for a swapbacked folio, so no shadow entry is created and __filemap_remove_folio(folio, NULL) simply empties the i_pages slot. The data is freed without ever being written to swap, and the next fault on that index returns a freshly zeroed folio. This is silent data loss for any process that keeps state in a MAP_SHARED tmpfs segment across an unmap - for example a cache handed from one process generation to the next through /dev/shm. It requires the folio to be PMD-mapped, so it only shows up once shmem THP is enabled (which is what we did in Meta fleet and started noticing crashes); with THP off the pte path transfers the dirty bit correctly. It also only becomes visible when swap is enabled, because with no swap device shmem folios (which are on the anon LRU) are not scanned by reclaim at all, so the clean folio is never dropped. Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a 2MB-backed region, write a known pattern through the resulting mapping, munmap, force reclaim of the cgroup, then re-map and read back. Without this patch the region reads back as zeros and vmstat shows zswpout 0 - the data was discarded rather than swapped. With this patch the region reads back correctly and the pages are swapped out as expected. With huge=never, or when the first touch is a write, the test passes either way. Link: https://lore.kernel.org/20260819101222.3732660-1-usama.arif@linux.dev Fixes: b5072380eb61 ("thp: support file pages in zap_huge_pmd()") Signed-off-by: Usama Arif Acked-by: David Hildenbrand (Arm) Reviewed-by: Kiryl Shutsemau Acked-by: Hugh Dickins Tested-by: Lance Yang Reviewed-by: Zi Yan Reviewed-by: Lorenzo Stoakes (ARM) Reviewed-by: Baolin Wang Cc: Barry Song Cc: Dev Jain Cc: Johannes Weiner Cc: Liam R. Howlett Cc: Nhat Pham Cc: Rik van Riel Cc: Ryan Roberts Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton [ Ting-Han: zap_huge_pmd_folio() does not exist in this tree; the file branch is open-coded in zap_huge_pmd(), so transfer the dirty bit there. This tree has no folio_mark_dirty(), so use set_page_dirty() on the head page, as zap_pte_range() does for dirty ptes ] Assisted-by: LLM Signed-off-by: Ting-Han Hou Signed-off-by: Sasha Levin commit fe2785d5513b3254368a1f0831515fc59ab0d40d Author: Linmao Li Date: Mon Aug 24 12:26:11 2026 -0400 Input: byd - synchronize timer deletion before freeing private data [ Upstream commit c83e79c0842ed29860648bcce5022ef0ba5001c6 ] byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op. Fixes: 2d5f5611dd0d ("Input: byd - enable absolute mode") Cc: stable@vger.kernel.org Signed-off-by: Linmao Li Link: https://patch.msgid.link/20260720061259.1601281-1-lilinmao@kylinos.cn Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit 092e14e1479a39157ca01668d43e4649793f39ed Author: Christian Brauner Date: Wed Oct 21 17:36:56 2026 -0400 unicode: free the map after a grace period [ Upstream commit a96c5299bd7305eb984377681eb3222a57376405 ] generic_ci_d_hash() and generic_ci_d_compare() read sb->s_encoding and dereference the unicode map while a pathwalk in rcu mode holds nothing but rcu_read_lock(). The filesystems that use them, ext4, f2fs and tmpfs, drop the map with utf8_unload() from ->put_super(), which runs when the last reference to the mount goes away. A lookup that is still inside such a filesystem at that point reads a freed map. With a pathwalk held up in utf8_casefold_hash() while the last reference to a casefolded tmpfs goes away: BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950 Read of size 8 at addr ff110001030fe658 by task walker/98 Call Trace: utf8nlookup+0x74c/0x950 utf8byte+0x160/0x1560 utf8_casefold_hash+0x167/0x230 generic_ci_d_hash+0xdd/0x1c0 link_path_walk+0x11ad/0x1d30 path_lookupat+0x63/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 [...] Allocated by task 94: __kmalloc_cache_noprof+0x249/0x560 utf8_load+0x4e/0x570 shmem_parse_opt_casefold.isra.0+0x92/0x270 [...] Freed by task 97: kfree+0x1db/0x5b0 shmem_put_super+0x72/0x170 generic_shutdown_super+0x14c/0x530 kill_anon_super+0x3a/0x60 deactivate_locked_super+0x9c/0xf0 cleanup_mnt+0x9f/0x130 So far that has been hard to hit. umount(2) waits for a grace period in namespace_unlock() before it drops the mount, so only a mount whose last reference goes away elsewhere, like the close of a file or a chdir out of a lazily unmounted directory, can race a walker. So it is reachable. Delay the free until a grace period has passed. The map and the data table it holds a reference to then outlive any pathwalk that found the superblock before the mount went away. The reference on the data table module is dropped from the rcu callback as well. utf8-core is built in whenever CONFIG_UNICODE is set, so there is no module exit that would have to wait for the callbacks. Overlayfs points the s_encoding of an overlay at the map of its first layer without taking a reference of its own. That stays correct. The layer is held by the overlay, so its map is dropped only after the overlay is gone. Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261009-work-fixes-rcu-v1-6-7446d2d335e6@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: replaced the custom RCU callback with kfree_rcu() because there is no table module reference to release ] Signed-off-by: Sasha Levin commit 2137d487b25eefa862be70de489b64f4c679fe1f Author: Cen Zhang (Microsoft) Date: Thu Oct 22 07:35:00 2026 -0400 watch_queue: Fix note pool publication race in watch_queue_set_size() [ Upstream commit 5e531d62f1f8834faf7a4eed0d41105cf6570a8f ] There is a race between watch_queue_set_size() and post_one_notification(). watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and nr_notes with plain stores, and post_one_notification() reads them with plain loads under a different lock, so nothing orders the four stores against the poster's loads: depending on the build, notes can be stored last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch attach to a queue before it is sized, post_one_notification() can already be running on another CPU at that moment: it reads nr_notes > 0, passes its bounds check, and then reads notes while it is still NULL, dereferencing notes[0]. An unprivileged user triggers this reliably by watching one of its own keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE) on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU, triggering: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0 Call Trace: __post_watch_notification+0x148/0x180 keyctl_setperm_key+0x119/0x130 do_syscall_64+0x108/0x4c0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception in interrupt Fix this by publishing nr_notes last with smp_store_release(), and by reading it once with smp_load_acquire() in post_one_notification() before the bitmap and the page array are touched. A poster that observes a non-zero nr_notes then also observes the pool behind it; one that observes zero drops the notification as before. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Dae R. Jeong Closes: https://lore.kernel.org/all/ZT-S8Q7tyutcvu_q@dragonet/ Reported-by: AutonomousCodeSecurity@microsoft.com Suggested-by: Dae R. Jeong Signed-off-by: Cen Zhang (Microsoft) Link: https://patch.msgid.link/20261009224715.46121-1-cenzhang@linux.microsoft.com Reviewed-by: Bradley Morgan Cc: Signed-off-by: Christian Brauner (Amutable) [ sashal: retained the existing mask variable when adding nr_notes to the local declaration ] Signed-off-by: Sasha Levin commit babdf2a11329d30dc5086eb7a938a360aa490282 Author: Daniil Stas Date: Fri Oct 23 13:38:19 2026 +0900 hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur commit 82163d63ae7a4c36142cd252388737205bb7e4b9 upstream. scsi_execute_cmd() function can return both negative (linux codes) and positive (scsi_cmnd result field) error codes. Currently the driver just passes error codes of scsi_execute_cmd() to hwmon core, which is incorrect because hwmon only checks for negative error codes. This leads to hwmon reporting uninitialized data to userspace in case of SCSI errors (for example if the disk drive was disconnected). This patch checks scsi_execute_cmd() output and returns -EIO if it's error code is positive. Fixes: 5b46903d8bf37 ("hwmon: Driver for disk and solid state drives with temperature sensors") Signed-off-by: Daniil Stas Cc: Guenter Roeck Cc: Chris Healy Cc: Linus Walleij Cc: Martin K. Petersen Cc: Bart Van Assche Cc: linux-kernel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net [groeck: Avoid inline variable declaration for portability] Signed-off-by: Guenter Roeck Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Sasha Levin commit df829e4fe235b3a0dbf830986d81c040d3d2e940 Author: Fuad Tabba Date: Thu Oct 22 17:45:36 2026 +0000 KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save [ Upstream commit c6c156d931c33b92362383cf76f6d6e1291dcbfe ] MAPC with V=0 drops ite->collection but leaves the ITE on the device's ITT list, and vgic_its_save_ite() dereferences it unconditionally. A guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it. That sequence is UNPREDICTABLE per the architecture, but KVM already handles the resulting state in the translate, MOVI and DISCARD paths. Save a zeroed entry, which vgic_its_restore_ite() reads back as invalid. Skipping the ITE instead would leave the ITT slot holding whatever is in guest memory, and restore rejects an entry naming a collection the restored collection table does not have. Fixes: eff484e0298da ("KVM: arm64: vgic-its: ITT save and restore") Cc: stable@vger.kernel.org Signed-off-by: Fuad Tabba Link: https://patch.msgid.link/20260807104102.2410744-2-fuad.tabba@linux.dev Signed-off-by: Oliver Upton [aarnahmd: Upstream vgic_its_write_entry_lock() takes in the kind of table entry (ite) and looks up its size, while 5.10 takes in the size of an ite directly via ite_esz, because commit 3b2c81d5feb2 ("KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes") is not in 5.10.] Signed-off-by: Aaron Ahmed Signed-off-by: Sasha Levin commit 7d7f9d2ee4b0841f3eba9fa3627044ad329428de Author: Laurence Oberman Date: Wed Oct 21 11:46:49 2026 -0400 scsi: st: Fix use-after-free race between st_remove() and st_open() commit 71caf7f84bd62a4bf91cc95abd2de690afb8d15f upstream. st_remove() drops the probe reference on the scsi_tape with kref_put() and only afterwards removes its index from st_index_idr. If that was the last reference, scsi_tape_release() frees the structure while it is still published in the idr. scsi_tape_get(), called from st_open(), looks up the tape in st_index_idr and takes a reference under st_ref_mutex and st_index_lock. remove_cdevs() does not wait for opens that are already past chrdev_open(), so an open that is blocked on st_ref_mutex while st_remove() holds it can take the mutex as soon as st_remove() drops it, find the freed tpnt in the idr and call kref_get() on it: BUG: KASAN: slab-use-after-free in st_open Write of size 4 ... st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291) chrdev_open ... Freed by task ...: kfree st_remove (drivers/scsi/st.c:4512) Remove the index from the idr before dropping the reference, all under st_ref_mutex. A concurrent scsi_tape_get() now either runs first and holds a valid reference that keeps the tape alive, or runs afterwards and finds nothing, so st_open() fails with -ENXIO. This restores the ordering st_remove() had before the conversion to st_index_idr, where the tape was unpublished from scsi_tapes[] before the final kref_put(). Fixes: 6c648d95a6af ("[SCSI] st: get rid of scsi_tapes array") Cc: stable@vger.kernel.org Reported-by: Dingisoul Closes: https://lore.kernel.org/linux-scsi/20261007211520.1428497-1-dingiso.kernel@gmail.com/ Tested-by: Dingisoul Signed-off-by: Laurence Oberman Link: https://patch.msgid.link/20261013202548.249628-1-loberman@redhat.com Signed-off-by: Martin K. Petersen (Oracle) [ loberman: st_remove() still returns int in 5.10; context adjusted ] Signed-off-by: Laurence Oberman Signed-off-by: Sasha Levin commit eba0a6365a0f38f7598a02fc7f9ee341c7efe7f5 Author: Lee Jones Date: Tue Oct 13 11:24:48 2026 +0000 tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields commit a244c241593b5b38a08f0df2cb43c26574efbdcb upstream. In check_synth_field(), when a synthetic event field is a stacktrace (field->is_stack) and the histogram field is not a "long[" stacktrace array, validation falls through to the generic size and signedness comparison. Because parse_synth_field() sets a stacktrace field's type to "__data_loc unsigned long[]", its size is sizeof(u64) and synth_field_signed() marks it as signed. Consequently, any 8-byte signed scalar histogram field passes the fallback check, and its scalar value is subsequently dereferenced as a kernel stacktrace pointer in get_field_size() and trace_stack(). Furthermore, checking strstr(hist_field->type, "long[") is insufficient because tracepoint fields defined with __bitmask() or __rel_bitmask() also have type "__data_loc unsigned long[]" or "__rel_loc unsigned long[]", whilst create_hist_field() treats them as 4-byte scalar values without HIST_FIELD_FL_STACKTRACE. Propagate HIST_FIELD_FL_STACKTRACE to variable references and field variables (whilst excluding variable aliases from per-element stacktrace capture), and reject any mismatch between HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). Cc: stable@vger.kernel.org Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces") Link: https://patch.msgid.link/20261013112449.1006088-1-lee@kernel.org Signed-off-by: Lee Jones Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt [Lee: Omit create_var_field() and hist_trigger_elt_update() hunks as 288709c9f3b0 ("tracing: Allow stacktraces to be saved as histogram variables") is not present] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman commit a9283d006eef7e3b56f0f279a49bb63f6e5e61df Author: Aohan Mei Date: Wed Aug 26 10:51:20 2026 +0800 net/sched: cls_flower: validate mask pointer after nla_next() commit fee10655709c5c597e8e9f722f3035d9ea31ff3a upstream. fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes. Fixes: c96adff95619 ("cls_flower: call nla_ok() before nla_next()") Reported-by: TencentOS Corvus AI Cc: stable@vger.kernel.org Signed-off-by: Aohan Mei Link: https://patch.msgid.link/20260826025123.62758-1-ljp1205831794@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 78f107c8196ca7cb74803d2192ecc1e07a23b288 Author: Hyunwoo Kim Date: Tue Oct 20 19:50:59 2026 -0700 KVM: x86/mmu: Preserve nested TDP shadow page tables if they are used as roots [ Upstream commit 7a2c70e777a00c32ebafd376a6fe31ebb91c5b20 ] kvm_mmu_zap_oldest_mmu_pages() excludes a shadow page whose root_count is non-zero from top-level reclaim, because such a page cannot be freed. The path in mmu_page_zap_pte() that recursively zaps a parentless nested TDP child has no such check. As a result, a shadow page can be zapped even if the page itself can't be freed; as the comment in kvm_mmu_zap_oldest_mmu_pages() notes, zapping it will just force vCPUs to rebuild the page. As in top-level reclaim, do not recursively prepare zapping of a nested TDP child whose root_count is non-zero. Fixes: 2de4085cccea ("KVM: x86/MMU: Recursively zap nested TDP SPs when zapping last/only parent") Signed-off-by: Hyunwoo Kim Signed-off-by: Paolo Bonzini [sean: resolve minor conflict due to lack of lockless aging in 5.10] Signed-off-by: Sean Christopherson Signed-off-by: Sasha Levin commit 835b9b5b4d287a03c713680b0231d36ff599201b Author: Di Shen Date: Tue Oct 20 23:07:39 2026 +0200 OPP: Fix race between OPP addition and lookup [ Upstream commit f5e1cc9a284bff2510981643a5bca4bc4c21b81a ] A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. Fixes: 7034764a1e4a (PM / OPP: Add 'struct kref' to struct dev_pm_opp) Co-developed-by: Ling Xu Signed-off-by: Ling Xu Signed-off-by: Di Shen [ Viresh: Updated commit log ] Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 43e1a952d534fc0e173b513a24b19ce99bb60974 Author: Zhang Changzhong Date: Tue Oct 20 22:26:36 2026 +0200 net/sched: cls_u32: skip hash tables in u32_bind_class() [ Upstream commit 6d3724e616faf952c3adcf8414fc21a828ef3709 ] u32_walk() enumerates both struct tc_u_hnode and struct tc_u_knode through the walker callback. u32_bind_class() unconditionally casts the passed fh to tc_u_knode and accesses &n->res, so when fh is actually a tc_u_hnode, which has no tcf_result member, this results in a slab-out-of-bounds read of res->classid in tc_cls_bind_class(). The issue can be reproduced with the following commands: tc qdisc add dev lo root handle 1: hfsc tc class add dev lo parent 1: classid 1:1 hfsc sc rate 1000kbit tc filter add dev lo parent 1:1 protocol ip prio 1 u32 match u32 0 0 flowid 1:1 tc class add dev lo parent 1: classid 1:2 hfsc sc rate 2000kbit Fix this by skipping hash tables via the TC_U32_KEY(handle) check. Fixes: 07d79fc7d94e ("net_sched: add reverse binding for tc class") Signed-off-by: Zhang Changzhong Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/1786089038-36366-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 1d8d987a2aacde238ecd0f4946f28cef74c42b79 Author: Linus Torvalds Date: Tue Oct 20 22:17:58 2026 +0200 security/keys: fix missed RCU read section on lookup commit 43a1e3744548e6fd85873e6fb43e293eb4010694 upstream. Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for. [ Moved the guard at the top of the function to solve a compilation issue ] Reported-by: Nicholas Carlini Cc: David Howells Cc: Jarkko Sakkinen Cc: Paul Moore Cc: James Morris James Morris Cc: Serge E. Hallyn Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 7c3530b1c359e7cb32b3b10e996dd9906abcbbc9 Author: David Rosca Date: Thu Aug 20 16:32:51 2026 +0200 drm/amdgpu: Fix VCE 3 ring align_mask [ Upstream commit 2ee9836545e690c9e66ec203445d7705959fd7a8 ] The largest frame is 20 dwords, so 0xf mask is too small. This was always wrong, but we were lucky with the VCE_CMD_END commands inserted after fence and vm_flush. Fixes: 8897ea8c761b ("drm/amdgpu: Implement insert_end for VCE 3") Cc: stable@vger.kernel.org Acked-by: Alex Deucher Signed-off-by: David Rosca Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 51eaba47b3dc258d1182fc3a88da544ed6b6bb2d Author: Lorenzo Stoakes (ARM) Date: Mon Oct 19 18:47:30 2026 +0100 mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF [ Upstream commit 26444eb71465c9934d9d418ef69c43f61185329b ] Currently there is a nasty race between ptdump and ioremap when attempting to map a huge P4D, PUD or PMD entry: * ptdump walks kernel page table ranges it doesn't own. * When ioremap maps ranges it tries to promote existing ones to huge page tables in ioremap_try_huge_[p4d,pud,pmd]() at P4D, PUD and PMD level, freeing the lower page table in [p4d,pud,pmd]_free_[pud,pmd,pte]_page() when it succeeds. Both of these things can happen at the same time and as a result ptdump can access a freed page table, resulting in a use-after-free and memory corruption. This is possible because while ptdump_walk_pgd() holds both the mem hotplug lock and the mmap write lock before invoking walk_page_range_novma(), ioremap takes no relevant locks at all. Fix this by holding the mmap read lock in ioremap_try_huge_*() when freeing page tables. The read lock is sufficient: ptdump is the only walker that must be excluded and it holds the mmap write lock. Other holders of the read lock may run concurrently, but each exclusively owns the range it operates on and cannot reach the page tables freed here. We also hold the lock while assigning the huge page table entry, which means page table walkers observe only the huge or non-huge page table entry. We use a trylock to prevent ptdump from blocking ioremap making forward progress. This is fine because it's an optimisation in any case, and thus the ioremap can safely proceed regardless. All other kernel page table walkers that touch vmalloc ranges either exclusively own the memory walked or acquire the mmap lock, so this correctly excludes those walkers. The issue has existed as long as ptdump was available and vmap freed page tables when promoting to a huge leaf entry, that is, since commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") for huge ioremap, and commit 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings") for huge vmalloc. Since the former is the earlier of the two we choose that for our Fixes tag. This patch is based on work by David Carlier (linked), with gratitude! Fixes: b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table") Signed-off-by: Lorenzo Stoakes (ARM) Reported-by: syzbot+fd95a72470f5a44e464c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/6a287988.39669fcc.33b062.00a0.GAE@google.com/T/ Link: https://lore.kernel.org/linux-mm/20260706203128.162335-1-devnexen@gmail.com/ Reviewed-by: Mike Rapoport (Microsoft) Reviewed-by: Dev Jain Acked-by: David Hildenbrand (Arm) Reviewed-by: Kiryl Shutsemau Cc: Signed-off-by: Andrew Morton [ ljs - Applied to ioremap_try_huge_*() in mm/ioremap.c, open-coded missing stuff + other smaller changes. Updated commit msg to reflect. ] Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Sasha Levin commit 7856cb9f0d795ce518a44c5d135dd932cfbfc656 Author: Hao Sun Date: Mon Oct 19 19:33:57 2026 +0200 bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS [ Upstream commit 22c7fa171a02d310e3a3f6ed46a698ca8a0060ed ] For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Signed-off-by: Hao Sun Signed-off-by: Daniel Borkmann Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20240115082028.9992-1-sunhao.th@gmail.com Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit baf3a767b2845eb8e68f056ee4aa5b41b151e990 Author: Zihan Xi Date: Thu Aug 27 18:25:14 2026 +0000 ipv4: avoid divide by zero in fib_rebalance commit 5046d2880fec7d49ebed2fd2866747ee1d06ad71 upstream. fib_rebalance() computes the total eligible nexthop weight in one pass and programs upper bounds in a second pass. A concurrent change to ignore_routes_with_linkdown can make the first pass return zero while the second pass sees an eligible nexthop, resulting in division by zero. If the first pass reports a zero total, set each nexthop upper bound to -1 and skip the division. This matches the IPv6 fix in commit d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance") and preserves the lock-free rebalance path. Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Reviewed-by: Eric Dumazet Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260827182514.4667-2-zihanx@nebusec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ad1be38823d4b6dbc88648da296ca0c0f8824a55 Author: Niklas Schnelle Date: Thu Aug 6 11:43:39 2026 +0200 s390/pci: Fix leak of uninitialized kernel data in SCLP report commit 8ac60ae2a307a50b599bf5d300b448d638f3ba29 upstream. While report_error_write() checks that the provided buffer is at least as large as the header struct, but not that it is large enough to contain the report with the length claimed by report->length. If user-space provides a short buffer, meaning a larger report->length than the actually written payload, up to around 4K of kernel data from past the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter() will leak into the SCLP report. However, as the entity processing the SCLP is privileged and able to access at least the page including the report, this does not leak data that entity could not access but it is still an out of bounds read and a malformed error report that should be rejected. Fixes: 368704a65be8 ("s390/pci: add report_error attribute") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle Reviewed-by: Benjamin Block Signed-off-by: Vasily Gorbik Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit f9d9e2dadc9fbdfe01aeb6581978c3b59092919e Author: Aswin Karuvally Date: Thu Aug 27 08:34:08 2026 +0200 s390/ctcm: Prevent XID null dereference commit b264d8422779d69febce914efc47a92a85cc382c upstream. The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors. Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Cc: stable@vger.kernel.org Signed-off-by: Aswin Karuvally Link: https://patch.msgid.link/20260827063408.2168914-1-aswin@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit cc4a4f1d6b6d725438dc37b97f03d95ed9feb63f Author: Charles Vosburgh Date: Thu Aug 27 17:32:53 2026 -0400 sctp: validate chunk length in the inqueue parser commit 6cfc1b90cb86f4aabc69fb8e30128e07e2cdfa3a upstream. SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signature appeared. Reject chunks shorter than the generic SCTP header at the shared inqueue parser boundary. Mark the packet for discard before either caller can continue processing it, while preserving the four-byte generic minimum. Declared-length 1 through 4 controls and kernel-generated ASCONF traffic remained healthy. The patched sctp_hello selftest passed for IPv4 and IPv6. The complete private reproducer and validation evidence are available directly to maintainers on request. Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk") Cc: stable@vger.kernel.org Signed-off-by: Charles Vosburgh Acked-by: Xin Long Link: https://patch.msgid.link/20260827-sctp-zero-chunk-inqueue-v2-1-2e7669c6a6cb@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit c8b72ca0918e95f708f67c8b3e69b05290f2b6d2 Author: Chengfeng Ye Date: Wed Aug 26 03:01:41 2026 +0800 tipc: protect node reset trace dump with node lock commit dddf197f29ba5e47a476dde82bf542ca2e0d5e5e upstream. The tipc_node_reset_links trace event asks tipc_node_dump() to walk the node's link entries. Unlike the other node events that request link data, this event runs without the node lock. This permits bearer teardown to free a link while the trace callback is dumping it: CPU 0 CPU 1 trace_tipc_node_reset_links() tipc_node_dump() l = n->links[0].link tipc_node_write_lock() kfree(l) n->links[0].link = NULL tipc_node_write_unlock() tipc_link_dump(l) tipc_link_dump() then dereferences the stale pointer. KASAN reported: BUG: KASAN: slab-use-after-free in tipc_link_dump Read of size 4 by task poc/115 Call Trace: tipc_link_dump+0x10cb/0x16b0 tipc_node_dump+0x4bb/0x740 trace_event_raw_event_tipc_node_class+0x258/0x360 tipc_node_reset_links+0x14d/0x1a0 tipc_rcv+0x13f5/0x3030 tipc_udp_recv+0x4e3/0x670 Allocated by task 0: tipc_link_create+0x1e1/0x1020 tipc_node_check_dest+0x7d2/0x11a0 tipc_disc_rcv+0xdbf/0x1430 Freed by task 89: kfree+0x131/0x3c0 tipc_node_link_down+0x267/0x4b0 tipc_node_delete_links+0xec/0x160 bearer_disable+0x107/0x260 Take the node write lock around the trace event. This serializes the dump against tipc_node_link_down(delete=true), which frees the link under the same write lock. Fixes: eb18a510b5cd ("tipc: add trace_events for tipc node") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260825190141.242219-1-nicoyip.dev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit fe088b37e25943e6f1d195d479364840044f3314 Author: Genjian Zhang Date: Fri Aug 7 23:57:15 2026 +0800 dm-ebs: fix incorrect device offset check in ebs_ctr() commit 7ac81e2d2240f2c57bd073b0733e0b2abca38e82 upstream. is a backing-device sector offset; ti->len is the virtual target length. Comparing them rejects valid tables, e.g.: dmsetup create ebs0 --table "0 1048576 ebs /dev/sda 2097152 1 8" -> ebs: Invalid device offset sector (-EINVAL) Drop the check. Bounds against the backing device are already enforced later by device_area_is_invalid() via ebs_iterate_devices(). Cc: stable@vger.kernel.org Fixes: d3c7b35c20d6 ("dm: add emulated block size target") Signed-off-by: Genjian Zhang Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 445a6883f46d3ab1ff545199a8cc1d5834936d3f Author: Ben Cressey Date: Wed Aug 26 00:25:33 2026 +0000 dm-crypt: fix a tiny race condition in crypt_dec_pending commit 148845aa1921d95ef5dc851c76e6a284f6657df6 upstream. crypt_dec_pending reads io->error before calling atomic_dec_and_test. Another context, for example crypt_endio called from an interrupt, may set io->error and drop its reference between the read and the decrement. crypt_dec_pending then drops the last reference and completes the bio with the stale status - so a read that failed and was never decrypted, or a write that failed, is reported as successful. The read was placed before the decrement by commit b35f8caa0890 ("dm crypt: wait for endio to complete before destruction"), because that commit freed dm_crypt_io before calling bio_endio. This is no longer the case, dm_crypt_io lives in the per-bio data now. Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is fully ordered, so no additional barrier is needed. Fixes: b35f8caa0890 ("dm crypt: wait for endio to complete before destruction") Cc: stable@vger.kernel.org Reviewed-by: Jose Fernandez (Anthropic) Signed-off-by: Ben Cressey Assisted-by: Claude:unspecified Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 0c7a8cad7c96012a9157a189649e569d0390f384 Author: Benjamin Marzinski Date: Tue Aug 25 15:22:26 2026 -0400 dm cache: fix issue with background work locking commit bc9781c0247de107876f32929f1637db93a42b34 upstream. dm cache used a rw_semaphore for background_work_lock. Write locks on rw_semaphores have strict owner semantics, but there was no guarantee that the process that locked background_work_lock was the same process that unlocked it. This can be easily seen using a kernel compiled with CONFIG_DEBUG_RWSEMS. Given a dm cache device , run: 'dmsetup suspend && dmsetup resume '. This will trigger a kernel warning: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)) triggered by cache_resume(). To fix this, switch from a rw_semaphore to a spinlock and a wait queue. dm cache already has a wait queue and associated counter, migration_wait and nr_allocated_migrations, that was getting woken up when background work was getting completed, but wasn't actually used by anything. This is replaced by the background_work queue and counter. Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Marzinski Reviewed-by: Matthew Sakai Reviewed-by: Ming-Hung Tsai Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit f6575a6701e36b90642268838a42aada047910eb Author: Ming-Hung Tsai Date: Tue Aug 18 18:05:47 2026 +0800 dm cache: fix demotion stats in passthrough mode commit 2ccb8878c149443c6acf628b438c9c942c20abb2 upstream. The demotion counter is incremented per incoming write bio before the invalidation begins, causing the demotion count to exceed the actual number of cached blocks when multiple bios target the same cached block. Additionally, the counter is incremented unconditionally regardless of invalidation failure. Reproduce steps: 1. Create a cache device consisting of 512 cache entries modprobe brd rd_size=262144 dmsetup create cmeta --table "0 8192 linear /dev/ram0 0" dmsetup create cdata --table "0 65536 linear /dev/ram0 8192" dmsetup create corig --table "0 65536 linear /dev/ram0 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 65536 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --direct=1 --ioengine=libaio --iodepth=32 --io_size=2048m nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 65536 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache with multiple jobs to trigger multiple bios hitting the same cached block. fio --filename=/dev/mapper/cache --name=test --rw=write --bs=4k \ --direct=1 --ioengine=libaio --iodepth=32 --numjobs=4 5. Check if demoted matches cached block count. These numbers should match but may differ due to overcounting per bio. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" Fix by moving the demotion counter increment into invalidate_complete(), gated on the success flag. Reported-by: Ben Marzinski Fixes: b29d4986d0da ("dm cache: significant rework to leverage dm-bio-prison-v2") Cc: stable@vger.kernel.org Signed-off-by: Ming-Hung Tsai Reviewed-by: Benjamin Marzinski Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit 7c312f17917455eedcea29735fa302ebb93cb9b9 Author: Cen Zhang (Microsoft Security FORGE Labs) Date: Thu Aug 27 19:55:11 2026 -0400 tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO) commit 385e474086c2e7e29e2dded690be40dc273e20ee upstream. do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the get_info function pointer without rcu_read_lock(). With BPF struct_ops congestion control, ca_ops can point to dynamically allocated memory that is freed concurrently, resulting in a use-after-free when the kernel dereferences or calls through the stale pointer. BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0 Read of size 8 at addr ffff888013701258 by task exploit/149 do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564) tcp_getsockopt+0x91/0xf0 __sys_getsockopt+0xf7/0x170 Fix this by wrapping the ca_ops load and get_info call within rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load the icsk_ca_ops pointer. Fixes: 0baf26b0fcd7 ("bpf: tcp: Support tcp_congestion_ops in bpf") Suggested-by: Eric Dumazet Cc: AutonomousCodeSecurity@microsoft.com Cc: stable@vger.kernel.org Reviewed-by: Eric Dumazet Signed-off-by: Cen Zhang (Microsoft Security FORGE Labs) Reviewed-by: Jiayuan Chen Reviewed-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/65fd3816ed5d541d9edd4bf4fcf97104a2cf907a.1787870710.git.blbllhy@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 87a9aba92485889d510052e474999a6ec00b888c Author: Heyang Tan Date: Fri Sep 18 16:33:49 2026 +0800 wifi: p54: validate firmware record lengths commit db7b86bd97b380ece8fa39cfdd7502a9fd35e56f upstream. The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state. Assisted-by: LLM Codex Signed-off-by: Heyang Tan Tested-by: Christian Lamparter Link: https://patch.msgid.link/20260918083349.891-1-thy15333007817@163.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 37c68ae067a6327c3274fb36bbc7015848212806 Author: Donggeun Yoo Date: Wed Sep 16 09:27:35 2026 +0900 tracing: Fix the shift out of bounds in the log2 histogram modifier commit 647c2f97fcb94bc642cefe6db004999974563f06 upstream. The .log2 key modifier files a value under its base-2 order: # echo 'hist:keys=bytes_req.log2' > events/kmem/kmalloc/trigger hist_field_log2() computes that as ilog2(roundup_pow_of_two(val)). The out-of-line form of roundup_pow_of_two() is return 1UL << fls_long(n - 1); which shifts by 64 on a 64-bit kernel both when n is 0, where n - 1 wraps to ULONG_MAX, and when n is above 2^63. Both are ordinary keys, because the field fetch hands every value over as a u64: a syscall argument of 0 reaches the first, and one above 2^63 reaches the second. Keying sys_enter_lseek on offset.log2 and passing 0, 1, 2, 3, 1000, 2^63+1 and U64_MAX gives { offset: ~ 2^1 } hitcount: 1 { offset: ~ 2^10 } hitcount: 1 { offset: ~ 2^2 } hitcount: 1 { offset: ~ 2^0 } hitcount: 4 Keys above 2^63 land in the lowest bucket. With CONFIG_UBSAN_SHIFT=y the shift is also reported: UBSAN: shift-out-of-bounds in include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' __ubsan_handle_shift_out_of_bounds.cold+0xdd/0x1cb hist_fn_call.cold+0x8b/0xd9 event_hist_trigger+0x1cc/0x790 ftrace_syscall_enter+0x197/0x360 do_syscall_64+0x402/0x4b0 Use order_base_2(), which is ilog2(n - 1) + 1 for n > 1 and 0 below that. It returns what the old expression returned on every input the old one was defined for. Where it was not, 0 stays in bucket 0, which is where x86_64 had been putting it, and the keys above 2^63 move into bucket 64. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260916002735.808520-1-donggeunyoo.kernel@gmail.com Fixes: 4b94f5b7b4a5 ("tracing: Add hist trigger 'log2' modifier") Signed-off-by: Donggeun Yoo Assisted-by: Claude:claude-fable-5 Signed-off-by: Steven Rostedt Signed-off-by: Greg Kroah-Hartman commit 24c1f6e381d564e5f6893323cfe0264950358451 Author: Jesse Zhang Date: Fri Oct 9 13:21:33 2026 +0800 drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr commit de9f6bcdb44f0e410031002e2f103826ea6b6259 upstream. amdgpu_debugfs_gpr_read() drops its runtime PM reference right after reading the wave registers. When copying them to userspace fails, it jumps to the err label, which drops the reference a second time. A read into a bad buffer on Navi31 either steals a reference somebody else holds (power/runtime_usage goes from 1 to 0) or underflows the count: amdgpu 0000:03:00.0: Runtime PM usage count underflow! The registers are already in the kernel buffer at that point, so finish the hardware access first and copy the buffer with a single copy_to_user() instead of the put_user() loop with its own error path. Fixes: 9eee152aab56 ("drm/amdgpu/debugfs: fix ref count leak when pm_runtime_get_sync fails") Reviewed-by: Alex Deucher Signed-off-by: Jesse Zhang Signed-off-by: Alex Deucher (cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 41625b9e967a835e9ac93f15f7de9813b5496867 Author: Timur Kristóf Date: Wed Oct 7 00:02:52 2026 +0200 drm/amdgpu/sdma3: Work around POLL_REGMEM / FENCE hang commit 752480ad62964edf0254e151110d3e53a7cb37de upstream. SDMA can randomly hang on Polaris 10. Hard to reproduce, but has been occurring sporadically in the Mesa CI on the RADV Polaris 10 job even when Mesa isn't using the SDMA engine. When Mesa actually uses the SDMA on Polaris, the hang becomes more frequent and the reproduction rate goes up significantly in the CI system. We don't know why the hangs occur, but it seems that inserting a single NOP packet before each POLL_REGMEM and FENCE packet works around it. At the moment it's unclear which GPUs are affected, so let's apply this to SDMA 3.x for now. Note that this issue is not documented or acknowledged by AMD. Reviewed-by: Alex Deucher Signed-off-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit c343a27ed90823d08de125f7c447d96d056b75d9) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit bf4035656852a386fecb5d6217710a1bde536e76 Author: Yehyeong Lee Date: Wed Oct 7 10:58:42 2026 +0900 scsi: libiscsi: Validate the task named by a management response commit 11bffcd9cb346732eab2914ef44fe777a3f0b585 upstream. __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206 [ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020 [ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060 [ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000 [ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800 [ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000 [ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0 [ 6.298712] PKRU: 55555554 [ 6.298713] Call Trace: [ 6.298714] [ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0 [ 6.298758] iscsi_complete_pdu+0x54/0xa0 [ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80 [ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.298804] __tcp_read_sock+0x1ab/0x810 [ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.298814] tcp_rcv_established+0x1f56/0x3a00 [ 6.298842] tcp_v4_do_rcv+0x449/0x960 [ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 Fixes: 7996a778ff8c ("[SCSI] iscsi: add libiscsi") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-4-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 3637a4ad1d07477f1c60609876da6b60154d224b Author: Yehyeong Lee Date: Wed Oct 7 10:58:41 2026 +0900 scsi: libiscsi: Validate the ITT reflected in a Reject PDU commit c5958c770b2a0ee492414e26b07da9164a0d1f5d upstream. A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067] [ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160 [ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00 [ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206 [ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25 [ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060 [ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504 [ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000 [ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000 [ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000 [ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0 [ 6.255439] PKRU: 55555554 [ 6.255564] Call Trace: [ 6.255674] [ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0 [ 6.256733] iscsi_complete_pdu+0x54/0xa0 [ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250 [ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0 [ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390 [ 6.258061] __tcp_read_sock+0x1ab/0x810 [ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510 [ 6.259808] tcp_data_queue+0x1f13/0x4cd0 [ 6.260567] tcp_rcv_established+0x8a5/0x3a00 [ 6.261931] tcp_v4_do_rcv+0x449/0x960 [ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 Fixes: 8afa1439fcff ("[SCSI] libiscsi: handle immediate command rejections") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-3-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 24bd9ba431b2daa263f3551bc2f09f6b4487f5ae Author: Yehyeong Lee Date: Wed Oct 7 10:58:40 2026 +0900 scsi: libiscsi: Reject a negative task index from parse_pdu_itt commit 8ee2a09a1dbb257c9e828ad2497f8e4832dfb142 upstream. A transport that implements parse_pdu_itt hands libiscsi an index taken from the PDU, and both lookups bound it from above only: if (i >= session->cmds_max) i and cmds_max are both int, so a negative index passes and session->cmds[i] is read from before the array. be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag, *index = (int)itt; and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the hardware async ring without replacing its ITT, so the value is the target's. It also reports the session's own age rather than the one in the tag, which leaves the age comparison in iscsi_verify_itt() with nothing to reject. Bound the index from below in both lookups. Fixes: bfead3b2cb46 ("[SCSI] be2iscsi: Adding msix and mcc_rings V3") Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: Yehyeong Lee Link: https://patch.msgid.link/20261007015842.634893-2-yhlee@isslab.korea.ac.kr Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 1a11a5c175f4e0673ecf1a5cbbe559c62038b92b Author: Loic Poulain Date: Mon Oct 12 14:54:56 2026 +0200 i2c: qcom-cci: Fix HALT_ACK reset request being dropped commit 195f3d74b5de98969dc4fad956393bb00787efd1 upstream. A HALT_ACK interrupt indicates that the corresponding I2C master has entered the halted state and must be reset before further operation. The M0 and M1 HALT_ACK status bits may be asserted simultaneously in a single interrupt. However, the interrupt handler currently overwrites the reset mask when processing each HALT_ACK condition, causing the first reset request to be lost if both events are reported together. Accumulate reset requests instead of overwriting them so that both masters are properly reset when M0 and M1 HALT_ACK events occur in the same interrupt. Fixes: e517526195de4 ("i2c: Add Qualcomm CCI I2C driver") Signed-off-by: Loic Poulain Cc: # v5.8+ Reviewed-by: Konrad Dybcio Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20261012-cci-fixes-v1-1-8cd4eb1fc5f9@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman commit d7edf83f47b4bda6a4c9a1da6e5722ce96eec406 Author: Sasha Levin Date: Sun Oct 11 18:33:33 2026 -0400 tools: gpio: fix building from the top level with O= commit 52336337f1a01ad803c7f3ddb23f40222e9ad58d upstream. "make O= tools/gpio" fails: Makefile:27: /tools/build/Makefile.include: No such file or directory tools/Makefile clears srctree, and the gpio Makefile only works it out again when building_out_of_srctree is not set, which the top-level Makefile sets for O= builds. Also work out srctree when it is empty, as tools/bpf/Makefile does since commit a89b2cbf71d64 ("tools, bpf: Fix build for 'make -s tools/bpf O='"). Fixes: 4a6a6f5c4aeed ("tools: gpio: Use !building_out_of_srctree to determine srctree") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Sasha Levin Link: https://patch.msgid.link/20261011223358.2327625-5-sashal@kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 26af2969b29cc5eb893a454fee2a36b39521a5bd Author: Daehyeon Ko <4ncienth@gmail.com> Date: Wed Oct 7 12:57:39 2026 +0900 sctp: revalidate output stream after association connect wait commit b7ad72414c673ce1fa1f463e807cd4f34f8be9bf upstream. When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that drops the socket lock. Once the lock is reacquired, the validation remains stable through data creation and queueing. If validation fails after the connect wait, the auto-created association is already established. Return ESRCH so the existing caller path keeps it under state-machine ownership instead of freeing it directly, which would leave protocol, counter and socket state inconsistent. Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Acked-by: Xin Long Link: https://patch.msgid.link/20261007035739.3472432-1-4ncienth@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 0d15e853aa88da5375edd32b39d08a048b64a1c5 Author: Aohan Mei Date: Sat Oct 3 09:34:07 2026 -0700 net: rds: fix uninitialized trans dereference in CM event handler commit 492ba6ac1b1ffb8a06ff52db0825c1af2cdb28c8 upstream. rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies. The crash there is different: resolving a route on an iWARP id never fills in cm_id->route.path_rec, and the ROUTE_RESOLVED case writes path_rec[0].sl before it calls into the transport. The iWARP transport was dropped long ago and IB is the only transport left, so make that explicit: initialize trans to &rds_ib_transport at declaration, drop the conditional assignment, reject a connect request that arrives on a non-IB device, and drop a connection whose address resolved to one instead of resolving a route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST on purpose: a non-zero return from the handler makes rdma_cm destroy the id the event was delivered on, which is right for the request's freshly created id but would free a connection id that RDS still owns for any other event. On the active side the id stays ic->i_cm_id and the connection's shutdown destroys it, so that case returns 0. Fixes: dcdede0406d3 ("RDS: Drop stale iWARP RDMA transport") Reported-by: TencentOS Corvus AI Link: https://lore.kernel.org/netdev/20260824111701.2979194-1-ljp1205831794@gmail.com/ Link: https://lore.kernel.org/netdev/20260825021223.3483044-1-ljp1205831794@gmail.com/ Cc: stable@vger.kernel.org Assisted-by: CodeBuddy:Kimi-K3 Signed-off-by: Aohan Mei [achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of bailing out for every event on a non-IB device, so that rdma_cm does not destroy connection ids RDS still tracks; drop a connection whose address resolved to a non-IB device before a route is resolved on it; changelog adjusted] Assisted-by: LLM Signed-off-by: Allison Henderson Link: https://patch.msgid.link/20261003163408.250568-2-achender@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 4d83a3fc03bc595dd39b79ad61288738fbb1f2ba Author: Jérémy Jean Date: Thu Oct 8 18:13:49 2026 +0000 net/sched: fix use-after-free in __tcf_action_put() commit 7b16eb911091aae237a8673da94e4dfb9cd21d54 upstream. __tcf_action_put() decrements the reference count before decrementing the binding count. Another thread can free the action between these operations, causing the binding-count update to access freed memory. KASAN reports it as: BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340 Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64 Hold the action IDR mutex across both counter updates and IDR removal, keeping cleanup outside the lock. Fixes: 16af6067392c ("net: sched: implement reference counted action release") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Jérémy Jean Reviewed-by: Simon Horman Link: https://patch.msgid.link/20261008181348.527035-2-Jeremy.Jean@oss.cyber.gouv.fr Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit f7def717c06aea7004905e4d1568c3691ef9825d Author: Kyle Zeng Date: Fri Oct 2 05:59:02 2026 +0000 fsnotify: prevent mark additions during connector teardown commit 36ebddca56b9d8993d6dc984fdecc748ee1f5e06 upstream. fsnotify_destroy_marks() keeps a reference to its current mark while it drops conn->lock to destroy the mark. This stabilizes the forward-walk cursor, but does not prevent a new mark from being inserted before it. For example, an inotify watch re-added after IN_IGNORED sorts before the old, detached mark for the same group. The walk can miss the replacement and then detach the entire connector from the object. The replacement is still on its group's marks_list and, for inotify, in the watch IDR. The group mutex no longer protects the connector's object from disappearing. An unprivileged fdinfo read racing the final detach can consequently call igrab(NULL): BUG: KASAN: null-ptr-deref in igrab+0x24/0x100 Write of size 4 at addr 0000000000000148 Call Trace: igrab+0x24/0x100 inotify_show_fdinfo+0x1dc/0x5e0 seq_show+0x397/0x690 Set a DESTROYING flag under conn->lock before starting the walk, and reject new marks on that connector with -ENOENT. The existing add-mark error paths undo the temporary group-list entry and the backend's watch allocation. Do not wait for teardown while holding the group mutex, which the destroyer needs. Once the old connector is detached, an add can install a fresh connector as before. This closes the insertion race for all object types using the common connector teardown, without changing the mark reference or SRCU lifetime rules. Fixes: 6b3f05d24d35 ("fsnotify: Detach mark from object list when last reference is dropped") Cc: stable@vger.kernel.org Signed-off-by: Kyle Zeng Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit c2586874605ec23b611c57fe71d183d98f168971 Author: Amirmohammad Eftekhar Date: Thu Oct 1 14:43:54 2026 -0700 KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry commit c8f4cfe1cf93bce924e27f2abead7a4c4a487505 upstream. Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails in the "not from VM-Entry" case, i.e. when emulating RSM or handling KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM trying to run L1 with a nested MMU, and is especially problematic if the vCPU manages to free its nested state before the VM crashes. Constructing the root for a nested EPT MMU goes through vmcs12, which is dynamically allocated/freed when nVMX is enabled/disabled. And so if the nested state is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL pointer deref when attempting to get L1=>L2 EPTP. BUG: kernel NULL pointer dereference, address: 0000000000000078 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0 Oops: Oops: 0000 [#1] SMP CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Call Trace: kvm_mmu_load+0xcd/0x870 [kvm] kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm] kvm_vcpu_ioctl+0x2c7/0x970 [kvm] __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x9c/0x4d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47491b Modules linked in: kvm_intel kvm irqbypass CR2: 0000000000000078 ---[ end trace 0000000000000000 ]--- RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel] Cc: David Woodhouse Fixes: 72e9cbdb4338 ("KVM: nVMX: fix SMI injection in guest mode") Fixes: 8fcc4b5923af ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: stable@vger.kernel.org Signed-off-by: Amirmohammad Eftekhar [sean: write changelog] Signed-off-by: Sean Christopherson Link: https://patch.msgid.link/20261001214356.3825100-2-seanjc@google.com Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 95ba5de229c1875e836f10646c4e6c454d560060 Author: Sung Byeongchan Date: Thu Oct 8 02:35:42 2026 +0900 autofs: ignore notification errors from a replaced pipe commit 65676cd4203c0e41a94caf54080a7f0a95434bda upstream. autofs_notify_daemon() takes a reference to the current notification pipe under wq_mutex, then drops the mutex before writing the request. The write can block while the daemon enters catatonic mode and installs a replacement pipe. If the old pipe's reader is then closed, the delayed write returns -EPIPE and the generic error path enters catatonic mode again. That transition acts on the current superblock state, closes the replacement pipe, and releases the new daemon generation's wait queues. Only enter catatonic mode when the pipe which failed is still the current pipe. Factor the already-locked transition so the identity check and state change are atomic with respect to another replacement. This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest. An unprivileged UID 65534 lookup filled the old packet pipe before a normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe received HUP and both a pending victim lookup and a later lookup failed with ENOENT in two out of two fresh-mount runs. With this change, the new pipe remained active, received an intact 304-byte request, and both victim lookups completed in two out of two runs. Normal lookup and restart-without-a-blocked-writer controls passed. No KASAN, oops, refcount, or lock diagnostic was observed. A source reproducer and complete local logs are available privately on request. The demonstrated impact is limited to denial of a shared autofs service during a legitimate daemon restart. No memory corruption, information leak, privilege escalation, or code execution primitive was observed. Fixes: 8d7b48e0bc5fa ("autofs4: add miscellaneous device for ioctls") Cc: stable@vger.kernel.org Signed-off-by: Sung Byeongchan Link: https://patch.msgid.link/20261007173542.593624-1-tjdqudcks0424@naver.com Acked-by: Ian Kent Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit c61431f3b8c9824e9848a0308054f92b27fa7794 Author: Kyle Zeng Date: Wed Oct 7 18:14:00 2026 -0700 netlink: avoid hashing the network namespace pointer [ Upstream commit f88bb3606e4bd11ee035b682cddc2999e604609a ] The netlink rhashtable key includes a raw struct net pointer and a user-controlled port ID. Both /proc/net/netlink and socket diagnostics expose the table's bucket order. By binding and rebinding chosen NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal buckets and recover the low bits of the Jenkins hash. Its 32-bit seed and the limited set of kernel-image slides can then be searched offline to recover the address of init_net. Use the namespace's unique, non-address net_cookie in the comparison key instead. It is assigned before the per-net initializers run and remains unchanged for the namespace's lifetime. The lookup key and object hash are still built by netlink_compare_arg_init(), keeping lookup, insertion, removal and rehashing consistent while preserving namespace separation. Neither public table walker needs to change. Reading the socket's namespace cookie in netlink_compare() is safe under RCU, including during namespace teardown. netlink_release() removes the socket from the hash table and defers its final put with call_rcu(). cleanup_net() runs the per-net exit methods and waits for outstanding RCU callbacks with rcu_barrier() before freeing namespace storage. Unlike ns.ns_id, net_cookie is also available and initialized during setup_net() in older stable kernels, making the change straightforward to backport to v5.15 and later. Fixes: c428ecd1a21f ("netlink: Move namespace into hash key") Assisted-by: LLM Signed-off-by: Kyle Zeng Reviewed-by: Simon Horman Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20261008011359.63727-2-kylebot@openai.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 831e26cc2004926f69e3aba14b68d625f8d398fe Author: Eric Dumazet Date: Wed Feb 10 06:41:44 2021 -0800 net: initialize net->net_cookie at netns setup [ Upstream commit 3d368ab87cf6681f928de1ddf804d69600671bb2 ] It is simpler to make net->net_cookie a plain u64 written once in setup_net() instead of looping and using atomic64 helpers. Lorenz Bauer wants to add SO_NETNS_COOKIE socket option and this patch would makes his patch series simpler. Signed-off-by: Eric Dumazet Cc: Daniel Borkmann Cc: Lorenz Bauer Acked-by: Daniel Borkmann Tested-by: Lorenz Bauer Signed-off-by: David S. Miller Stable-dep-of: f88bb3606e4b ("netlink: avoid hashing the network namespace pointer") Signed-off-by: Sasha Levin commit 6041bcd185d4df051490fe166e64feae6c3b8291 Author: Kyle Zeng Date: Fri Oct 2 06:17:05 2026 +0000 pipe: preserve existing fasync readers on writer setup failure [ Upstream commit 40bb03d3ea6f6a915218508819ecc4d7a7fa260d ] F_SETFL and FIOASYNC decide whether to invoke ->fasync() before pipe_fasync() takes pipe->mutex. Two enables of one O_RDWR FIFO can therefore both enter the callback. fasync_helper() allocates before checking for an existing entry. If the first enable installs both entries, a second enable can update the reader entry and then fail the allocation for the writer entry. The error path removes the pre-existing reader entry, clearing FASYNC while the writer entry remains registered. __fput() then skips ->fasync(), so a later pipe notification can dereference the freed file or its f_owner. An unprivileged memory-pressure reproducer triggers a KASAN slab-use-after-free in send_sigio() through this path. Keep the reader helper's result and undo the registration only if this call added it. The pipe mutex serializes changes to both lists, so a failed new registration still removes its reader, while a failed duplicate preserves the existing registrations and FASYNC. Successful duplicate enables continue to update fa_fd as before. Fixes: 76398425bb06 ("Move FASYNC bit handling to f_op->fasync()") Signed-off-by: Kyle Zeng Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 0a3e5816c8a378387723d2a36a6cbd2330efc201 Author: Nickolai Zeldovich Date: Sun Oct 11 08:34:39 2026 -0400 exit: fix lost-update race on the child_subreaper bitfields [ Upstream commit 28d2905d77bc2e7c20260a6bc6b4179bdf95cb06 ] is_child_subreaper, has_child_subreaper, autoreap and, with CONFIG_POSIX_TIMERS=y, timer_create_restore_ids are 1-bit fields that share one memory location in struct signal_struct. A store to any of them is a read-modify-write of the whole word, and three of the stores run without a common lock: - PR_SET_CHILD_SUBREAPER writes me->signal->is_child_subreaper with no lock held. - propagate_has_child_subreaper(), run by walk_process_tree() from the same prctl in an ancestor, writes p->signal->has_child_subreaper of every descendant p under read_lock(&tasklist_lock), which does not exclude the other writers. - PR_TIMER_CREATE_RESTORE_IDS writes current->signal->timer_create_restore_ids with no lock held. When a process calls prctl(PR_SET_CHILD_SUBREAPER, 1) while an ancestor's PR_SET_CHILD_SUBREAPER walk visits it, or while another thread of the same process calls prctl(PR_TIMER_CREATE_RESTORE_IDS), the read-modify-write sequences interleave and one of the bits is silently lost: - If has_child_subreaper is lost, the process's orphaned descendants are reparented straight to init when it exits: find_new_reaper() tests father->signal->has_child_subreaper first and never looks for the ancestor subreaper. The service manager that registered as the subreaper never gets SIGCHLD for them and cannot wait() on them. - If is_child_subreaper is lost, the prctl returned 0 but the process is not a subreaper: orphans of its descendants skip it and are reparented to the next subreaper up or to init. PR_GET_CHILD_SUBREAPER reads back 0. - If timer_create_restore_ids is lost, the prctl returned 0 but timer_create() does not restore the requested timer ids (or keeps restoring them after _OFF), and _GET reads back the old value. Documentation/memory-barriers.txt requires all fields of one bitfield to be protected by one lock for exactly this reason. No lock is taken or documented for these flags, and the prctls need no privilege, so any process can hit the race against its own ancestors or descendants, or between two of its own threads. Make is_child_subreaper and has_child_subreaper separate bool members. Each store then has its own memory location and no read-modify-write of a neighbour. The readers and their locking are unchanged. autoreap stays a bit-field and so shares a memory location only with timer_create_restore_ids. That pair is race-free: autoreap is stored exactly once, in copy_process() before the new signal_struct is reachable by any other task, and timer_create_restore_ids is only stored to the signal_struct of an already running process. Fixes: 749860ce2427 ("prctl: propagate has_child_subreaper flag to every descendant") Signed-off-by: Nickolai Zeldovich Link: https://patch.msgid.link/20261011123440.768054-1-nickolai@csail.mit.edu Acked-by: Oleg Nesterov Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 512890b5e4baa1a3f24cd0dfd09ad8cb1c7d4ba4 Author: Christian Brauner Date: Thu Feb 26 14:50:59 2026 +0100 clone: add CLONE_AUTOREAP [ Upstream commit 12ae2c81b21cfaa193db2faf035d495807edc3a7 ] Add a new clone3() flag CLONE_AUTOREAP that makes a child process auto-reap on exit without ever becoming a zombie. This is a per-process property in contrast to the existing auto-reap mechanism via SA_NOCLDWAIT or SIG_IGN for SIGCHLD which applies to all children of a given parent. Currently the only way to automatically reap children is to set SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped property affecting all children which makes it unsuitable for libraries or applications that need selective auto-reaping of specific children while still being able to wait() on others. CLONE_AUTOREAP stores an autoreap flag in the child's signal_struct. When the child exits do_notify_parent() checks this flag and causes exit_notify() to transition the task directly to EXIT_DEAD. Since the flag lives on the child it survives reparenting: if the original parent exits and the child is reparented to a subreaper or init the child still auto-reaps when it eventually exits. CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent to monitor the child's exit via poll() and retrieve exit status via PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget pattern where the parent simply doesn't care about the child's exit status. No exit signal is delivered so exit_signal must be zero. CLONE_AUTOREAP is rejected in combination with CLONE_PARENT. If a CLONE_AUTOREAP child were to clone(CLONE_PARENT) the new grandchild would inherit exit_signal == 0 from the autoreap parent's group leader but without signal->autoreap. This grandchild would become a zombie that never sends a signal and is never autoreaped - confusing and arguably broken behavior. The flag is not inherited by the autoreap process's own children. Each child that should be autoreaped must be explicitly created with CLONE_AUTOREAP. Link: https://github.com/uapi-group/kernel-features/issues/45 Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-1-d148b984a989@kernel.org Reviewed-by: Oleg Nesterov Signed-off-by: Christian Brauner Stable-dep-of: 28d2905d77bc ("exit: fix lost-update race on the child_subreaper bitfields") Signed-off-by: Sasha Levin commit 7f4dce27e708c4fadab6cee8f112c5ea8e865789 Author: Sasha Levin Date: Sun Oct 11 18:33:42 2026 -0400 samples: pidfd: fix userprogs typo [ Upstream commit f1365f97fb7498d805981102eee22d362ae643f2 ] The Makefile adds pidfd-metadata to "usertprogs-always-y", which kbuild does not know, so the sample has not been built since the conversion to userprogs, even with CONFIG_SAMPLE_PIDFD=y. Fix the variable name. pidfd-metadata.c builds without warnings with gcc and clang for x86_64 and arm64. Fixes: 60fb0b1239719 ("samples: pidfd: build sample program for target architecture") Signed-off-by: Sasha Levin Link: https://patch.msgid.link/20261011223358.2327625-14-sashal@kernel.org Reviewed-by: Christian Brauner Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 03f2fdcc94238a5127ff8a21a4544fd6118cfc7b Author: Cen Zhang Date: Sun Oct 11 23:35:06 2026 +0800 ocfs2/dlm: Protect the recovery list during debugfs reads [ Upstream commit 4c435828932bf46f29860e4a0375bcae101b778a ] Recovery participant records must remain alive while debug_state_print() walks reco.node_data and formats their fields. The formatter holds dlm->spinlock, but the recovery participant list is protected by dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches the list under dlm_reco_state_lock and frees the detached records after releasing it. A concurrent debugfs open can therefore read freed memory. Protect the participant traversal and field reads in debug_state_print() with dlm_reco_state_lock, matching the existing list writers. This also serializes the traversal against list_add_tail() during recovery-area initialization. Make the existing lock available to the debug code through dlmcommon.h; the lock remains internal to the OCFS2 DLM module. Release dlm->spinlock after formatting the other domain state and before acquiring dlm_reco_state_lock, so the debug reader does not nest the two locks. Leave recovery list insertion, detachment and freeing unchanged. KASAN report as below: BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0 Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896 CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? debug_state_open+0x1169/0x12d0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? debug_state_open+0x1169/0x12d0 kasan_report+0xe0/0x110 ? debug_state_open+0x1169/0x12d0 debug_state_open+0x1169/0x12d0 ? __pfx_debug_state_open+0x10/0x10 full_proxy_open_regular+0x193/0x310 do_dentry_open+0x595/0x12d0 ? __pfx_full_proxy_open_regular+0x10/0x10 vfs_open_consume+0xd1/0x400 ? srso_alias_return_thunk+0x5/0xfbef5 path_openat+0x18d0/0x2020 ? __pfx_path_openat+0x10/0x10 do_file_open+0x21e/0x470 ? __pfx_do_file_open+0x10/0x10 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? alloc_fd+0x3a6/0x6b0 do_sys_openat2+0xf4/0x1b0 ? __pfx_do_sys_openat2+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __fput+0x5b5/0xa60 __x64_sys_openat+0x136/0x1e0 ? __pfx___x64_sys_openat+0x10/0x10 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [Register dump omitted.] Allocated by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_cache_noprof+0x28d/0x610 dlm_remaster_locks+0x147/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 Freed by task 880: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x308/0x580 dlm_destroy_recovery_area+0x285/0x460 dlm_remaster_locks+0x17c4/0x1d90 dlm_do_recovery+0xde1/0x1580 dlm_recovery_thread+0x109/0x300 kthread+0x351/0x460 ret_from_fork+0x659/0x940 ret_from_fork_asm+0x1a/0x30 The buggy address belongs to the object at ffff88810662ef80 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 0 bytes inside of freed 32-byte region [ffff88810662ef80, ffff88810662efa0) [Page and memory-state dumps omitted.] Fixes: 007dce53a29c ("ocfs2/dlm: Dump the dlm state in a debugfs file") Signed-off-by: Cen Zhang Link: https://patch.msgid.link/pm-ocfs2-objects-candidate-0049-v3-184e46c47f5283f06191@gmail.com Reviewed-by: Joseph Qi Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 128dfa7a9b4b3c956e8ac04a169a7ba04960cd75 Author: Linfeng Sun Date: Tue Aug 11 20:48:43 2026 +0800 scsi: target: iscsi: Fix race in discovery auth updates [ Upstream commit e15b81f602edbdee39c335546f25486a1747f3f0 ] Separate configfs opens can concurrently update the discovery AuthMethod parameter. Both callers may free the same value in iscsi_update_param_value(), causing a double-free. Protect the lookup and replacement with the discovery TPG access lock, as used by the other TPG configfs parameter updates. Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Signed-off-by: Linfeng Sun Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260811124843.6817-1-linfeng.sun.dev@gmail.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit 5e177cadbfe3c0ed98762981f19a04d16caa2133 Author: Laurence Oberman Date: Tue Oct 6 12:42:50 2026 -0400 scsi: st: Save the visited block for the partition the drive is in [ Upstream commit c9e9f024dd4f61f0f6636c9f2ed0830f87060e11 ] set_location() saves the current tape location before switching partitions, so that switch_partition() can return to it later. It reads the location with READ POSITION but stores it in the st_partstat of STp->partition, ignoring the partition the drive reports. The two differ after a device reset. When the reset is recovered with MTREW, MTSEEK or MTEOM, st_ioctl() sets STp->partition = 0 and calls switch_partition() to return to STp->new_partition. A drive that was in partition 1 is still there, so set_location() files the partition 1 position under partition 0. The next switch to partition 0 locates to that block: if partition 0 holds less data, MTSETPART fails with EIO (BLANK CHECK), otherwise the tape is silently positioned at the wrong block. IBM ULTRIUM-TD5 (LTO-5), LU reset in partition 1 at block 1025: st 12:0:0:0: [st0] Visited block 1025 for partition 0 saved. ... st 12:0:0:0: [st0] Setting block to 1025 and partition to 0. st 12:0:0:0: [st0] Error: 402, cmd: 2b 2 0 0 0 4 st 12:0:0:0: [st0] Sense Key : Blank Check [current] st 12:0:0:0: [st0] Add. Sense: End-of-data detected Store the location in the st_partstat of the partition reported by READ POSITION. With the fix: st 12:0:0:0: [st0] Visited block 1025 for partition 1 saved. This is a pre-existing issue. It was not caught when testing the recent st reset series because the partition test was only run on scsi_debug: on the LTO drive it was skipped, since can-partitions is off in the test harness's stinit.conf, as is normal for LTO. scsi_debug hides the problem because its emulated tape returns to the beginning of partition 0 on an LU reset. It was found while validating a backport of that series to RHEL 9.8, when the partition tests were run on real hardware with can-partitions enabled. The same failure then reproduced on unmodified RHEL 9.8 and on upstream, and the fix makes the test pass on v7.3-rc3 and RHEL 9.8 with an LTO-5. The harness (https://gitlab.com/loberman/tapetest, test X03) now refuses to silently skip the partition tests on hardware. Fixes: 7081dc75df79 ("scsi: st: Restore some drive settings after reset") Assisted-by: Claude Signed-off-by: Laurence Oberman Link: https://patch.msgid.link/20261006164250.773840-1-loberman@redhat.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit 7fd45e0c5858c3983b571e11eb5be2417f65e45c Author: Keith Busch Date: Tue Sep 22 08:34:16 2026 -0700 nios2: fix __wsum type degradation in csum_fold() [ Upstream commit b963f2345fa20417401c51a69dedb6a58eea33a9 ] csum_fold() shifts a bitwise __wsum type, which sparse reports as "restricted __wsum degrades to integer". Sparse only checks the body of a static inline once something instantiates it, so this went unnoticed until a recent block layer change added the first csum_fold() caller to a file built on this architecture. Force cast to a __u32 for the shift, as the other architectures do. Fixes: eea9507a69d6 ("nios2: Library functions") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202609222053.5gjiJjtb-lkp@intel.com/ Signed-off-by: Keith Busch Signed-off-by: Dinh Nguyen Signed-off-by: Sasha Levin commit 4123f8d2099863e2421187af9d87b45e8eebd867 Author: Kyle Zeng Date: Tue Oct 6 15:42:32 2026 -0700 netlink: reset skb headers before unicast and multicast filtering [ Upstream commit 8bf659bd54e1f00e34cf5244b1d289c506fa47c0 ] Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to an skb's network and MAC headers. Netlink producers may reserve headroom without resetting those headers, allowing a receiving socket's filter to read data before the initialized message. For example, IWPM HELLO replies are allocated with dev_alloc_skb(), which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can attach a classic socket filter and disclose this headroom through the length of the delivered reply. The resets in netlink_dump() do not help because IWPM sends a separately allocated skb through netlink_unicast(). Reset both headers before running the receiver's filter in unicast and broadcast delivery, as is already done for dump skbs. This also covers other netlink producers that reserve headroom without changing their allocation or message-building code. Fixes: b1153f29ee07 ("netlink: make socket filters work on netlink") Assisted-by: LLM Signed-off-by: Kyle Zeng Link: https://patch.msgid.link/20261006224232.50724-1-kylebot@openai.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit ef7a3e1e7bf62fa3667d0db7aec7353952202f4d Author: Anjali Kulkarni Date: Wed Jul 19 13:18:16 2023 -0700 netlink: Reverse the patch which removed filtering [ Upstream commit a3377386b56420d78a4c0a931a40f9a25c3ca2bd ] To use filtering at the connector & cn_proc layers, we need to enable filtering in the netlink layer. This reverses the patch which removed netlink filtering - commit ID for that patch: 549017aa1bb7 (netlink: remove netlink_broadcast_filtered). Signed-off-by: Anjali Kulkarni Reviewed-by: Liam R. Howlett Acked-by: Jakub Kicinski Signed-off-by: David S. Miller Stable-dep-of: 8bf659bd54e1 ("netlink: reset skb headers before unicast and multicast filtering") Signed-off-by: Sasha Levin commit e06148d5c4a97bf58e418bec0b849b11a6d3fe1e Author: Florian Westphal Date: Tue Oct 5 13:52:42 2021 +0200 netlink: remove netlink_broadcast_filtered [ Upstream commit 549017aa1bb7ec19a1e24e7f65480a1c2e76b90e ] No users in tree since commit a3498436b3a0 ("netns: restrict uevents"), so remove this functionality. Cc: Christian Brauner Signed-off-by: Florian Westphal Signed-off-by: David S. Miller Stable-dep-of: 8bf659bd54e1 ("netlink: reset skb headers before unicast and multicast filtering") Signed-off-by: Sasha Levin commit 333f49af0ad2478fd7f5988965e578047333e12b Author: HyeongJun An Date: Thu Oct 8 22:09:52 2026 +0900 ASoC: nau8822: Fix the 128x oversampling switch bits [ Upstream commit 4db45fc1da3d62d0fa6e8f1e457ae92e8741ed07 ] The DAC and ADC 128x Oversampling Switches use bit 5 of R10 and R14. The NAU8822 datasheet register map puts DACOS and ADCOS at bit 3 of those registers. In R14, bit 5 is inside HPF[6:4], which the High Pass Cut Off control owns. So turning on ADC oversampling changes the high pass cut-off, and the oversampling bit cannot be set. In R10, bit 5 is reserved, so the DAC switch has no effect. Use bit 3 for both. Fixes: 1e3cb6c321be ("ASoC: nau8822: new codec driver") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-7-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 82b6e417c2e322538237fe08cba1121a05913c4a Author: HyeongJun An Date: Thu Oct 8 22:09:51 2026 +0900 ASoC: wm8978: Fix the 128x oversampling switch bits [ Upstream commit d0567ca9a2faa33efbe5ae84ef7b86423a93bffd ] The DAC and ADC 128x Oversampling Switches use bit 5 of R10 and R14. Table 66 of the WM8978 datasheet puts DACOSR128 and ADCOSR128 at bit 3 of those registers. In R14, bit 5 is inside HPFCUT[6:4], which the High Pass Cut Off control owns. So turning on ADC oversampling changes the high pass cut-off, and the oversampling bit cannot be set. In R10, bit 5 is reserved, so the DAC switch has no effect. Use bit 3 for both. Fixes: 823dba519122 ("ASoC: Fix broken bitfield definitions in WM8978") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-6-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit ff7a83915ca3694f72bffed86b8b992390580667 Author: HyeongJun An Date: Thu Oct 8 22:09:50 2026 +0900 ASoC: max98371: Fix the Speaker DHT Min Volume bits [ Upstream commit f7934340c56a84fc1b246ebf6b2e806d775f3b54 ] Register 0x31 holds two 4-bit fields. The datasheet puts SPK_GAIN_MIN at bits 7:4 and DHT_VROT_PNT at bits 3:0. The Speaker DHT Min Volume and Speaker DHT Rotation Volume controls both use bits 3:0. So setting the minimum speaker gain changes the DHT rotation point, and SPK_GAIN_MIN cannot be set. Move Speaker DHT Min Volume to bits 7:4. Fixes: ca2cd6bc6663 ("ASoC: Add max98371 codec driver") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-5-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 9002cc8f25e9c3c0b457d1c413386af1050fdb99 Author: HyeongJun An Date: Thu Oct 8 22:09:49 2026 +0900 ASoC: pcm3168a: Fix the DAC zero flag polarity bit [ Upstream commit b26edc925c1cfa0184cd270ed81d4833db045ce0 ] The DAC Zero Flag Polarity enum uses PCM3168A_DAC_ATSPDA_SHIFT, which is bit 6 of register 70. That bit is ATSPDA, the attenuation speed, which the DAC Volume Rate Multiplier enum already owns. The datasheet puts ZREV, the zero flag polarity, at bit 0. The header defines PCM3168A_DAC_ZREV_SHIFT for it, but nothing uses it. So changing the zero flag polarity changes the attenuation speed, and ZREV cannot be set. Use PCM3168A_DAC_ZREV_SHIFT. Fixes: a9b17a638af5 ("ASoC: pcm3168a: Add driver for pcm3168a codec") Link: https://www.ti.com/lit/ds/symlink/pcm3168a.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Reviewed-by: Cezary Rojewski Link: https://patch.msgid.link/20261008130953.2446692-4-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 6d9c10101ee2b6c2522c8d8a47a11041d10cc6db Author: HyeongJun An Date: Thu Oct 8 22:09:48 2026 +0900 ASoC: cs42l52: Fix the NG Type Switch bit [ Upstream commit 8b08b98796d2da103f2432550c14a7c687e72080 ] The NG Type Switch enum selects between "Apply Specific" and "Apply All", which is the NGALL bit. The datasheet puts NGALL at bit 7 of the Noise Gate Control register. The enum uses bit 6, which is NG, the noise gate enable owned by the NG Enable Switch. cs42l52.h names it CS42L52_NG_ENABLE_SHIFT. cs42l56 has the same Noise Gate register and puts its NG All Switch at bit 7. So changing the noise gate type turns the noise gate on or off, and NGALL cannot be set. Use bit 7. Fixes: dfe0f98b8d2e ("ASoC: Add support for CS42L52 Codec") Link: https://statics.cirrus.com/pubs/proDatasheet/CS42L52_F2.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-3-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 987ee6711d3d2b67dd013058cccc6a318780e678 Author: HyeongJun An Date: Thu Oct 8 22:09:47 2026 +0900 ASoC: cs42l56: Put the Limiter Cushion control on the limiter register [ Upstream commit 203436d2aeb7093290459e344e1912a418a6ebfd ] The Limiter Cushion control writes bits 4:2 of the ALC Thresholds register. Those bits are ALCMIN, which the ALC MIN control owns. The datasheet puts CUSH at bits 4:2 of the Limit Thresholds Control register, next to LMAX, which the Limiter MAX control already uses. So setting the limiter cushion changes the ALC minimum threshold, and the cushion itself cannot be set. Use CS42L56_LIM_THRESHOLD_CTL. Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC") Link: https://statics.cirrus.com/pubs/proDatasheet/CS42L56_F2.pdf Assisted-by: Claude:claude-opus-5-5 Signed-off-by: HyeongJun An Link: https://patch.msgid.link/20261008130953.2446692-2-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 8c2ea0a197a1f7b979da50768de1884d478e5892 Author: Avi Weiss Date: Sun Oct 11 06:54:59 2026 +0300 ASoC: stm32: spdifrx: fix synchronization state check [ Upstream commit 0936bbd35a247665c64886135835faa3c3f4f29f ] The interrupt handler uses a logical AND to check whether SPDIFRX was in the SYNC state before clearing errors. Since both SYNC (1) and ENABLE (3) are nonzero, this also treats ENABLE as SYNC (and any other non-zero value that might be added). The logical && basically just converts this to check for != 0. So errors occurring while SPDIFRX is enabled cause the driver to retry synch instead of disconnecting the PCM stream. Fix is to change the logical && to equality (==) and only retry when exactly in sync state. Fixes: 0c93c291321f2 ("ASoC: stm32: spdifrx: retry synchronization in sync state") Signed-off-by: Avi Weiss Reviewed-by: Olivier Moysan Link: https://patch.msgid.link/20261011035459.2289403-1-thnkslprpt@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit ea36ef3c229d54b552432d1290aee1d807f67fd5 Author: Michal Luczaj Date: Mon Oct 5 02:26:22 2026 +0200 vsock: treat TCP_CLOSING as once-established [ Upstream commit 4f6ac74fa594a918d41255c941256e1d51592d3b ] Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can race with the connect loop. Immediately break and return 0 on ESTABLISHED/CLOSING. The return value of connect() should reflect what happened up to the point the connection was established or failed. Events that occur afterwards must not affect it. E.g. even if OP_RW has already set sk_err, connect() should still return 0, not ENOBUFS because of it. Adapt the inaccurate comment above signal_pending(). Resetting a socket that is still present in connected_table can lead to memory corruption. The reporter noted lost transports for in-flight skbs, and I have reproduced crashes caused by re-insertion into connected_table. list_add double add: new=, prev=, next=. kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:__list_add_valid_or_report+0x11f/0x130 Call Trace: vsock_insert_connected.cold+0xe/0x13 virtio_transport_recv_pkt+0x10e9/0x1460 vsock_loopback_work+0x305/0x480 process_one_work+0xe4c/0x1560 worker_thread+0x4f1/0xd60 kthread+0x36e/0x470 ret_from_fork+0x47b/0x6b0 ret_from_fork_asm+0x1a/0x30 This fix is supplementary to commit 002541ef650b ("vsock: Ignore signal/timeout on connect() if already established"). Details under Link. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reported-by: Hyunwoo Kim Link: https://lore.kernel.org/netdev/anzT1fREOSyHT99k@v4bel/ Signed-off-by: Michal Luczaj Reviewed-by: Stefano Garzarella Link: https://patch.msgid.link/20261005-vsock-connect-reset-closing-v4-1-15d41cfda3ed@rbox.co Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 2939215d57bc8e4189290544fca78f3809ac3ef8 Author: Michael Kelley Date: Mon Aug 31 20:45:14 2026 -0700 Drivers: hv: Don't reset VMBus connection state on error/exit paths [ Upstream commit ec31dc39e835ccde0930daccece8c492d28282fc ] In two places, current code forces vmbus_connection.conn_state to DISCONNECTED prior to calling vmbus_disconnect(). But vmbus_disconnect() calls vmbus_initiate_unload(), which unloads the VMBus connection only if the conn_state is CONNECTED. Consequently, the connection remains and the Hyper-V host might continue to send messages or post VMBus interrupts. The problem was introduced in commit 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback"), in that vmbus_initiate_unload() started checking the current connection state before doing the unload. This commit removed some occurrences where conn_state was forced to DISCONNECTED, but these two remained, apparently due to an oversight at the time. Fix this by not forcing conn_state to DISCONNECTED during VMBus exit, or if a failure occurs when establishing the connection in the first place. Whatever value conn_state has at the time is then read by vmbus_initiate_unload() to determine if there is a connection to be unloaded. Reported-by: Sashiko Closes: https://lore.kernel.org/linux-hyperv/20260805205806.B5AC31F000E9@smtp.kernel.org/ Fixes: 74347a99e73ae ("x86/Hyper-V: Unload vmbus channel in hv panic callback") Signed-off-by: Michael Kelley Signed-off-by: Wei Liu Signed-off-by: Sasha Levin commit d38bb2b96da910f6a00a8c1c02d67f9af7feaf25 Author: Xueqin Luo Date: Tue Sep 1 15:29:54 2026 +0800 power: supply: ds2780: Fix ds2780_get_capacity() returning raw value [ Upstream commit a58cbc8b36ec0cd00d2ba3de7d003de818a27523 ] ds2780_get_capacity() returns the raw register value instead of 0 on success. The capacity is already stored in *capacity, so the function should return 0 to indicate success. Fixes: 275ac74629c4 ("w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC support") Signed-off-by: Xueqin Luo Link: https://patch.msgid.link/20260901072954.1953121-1-luoxueqin@kylinos.cn Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 2157ac13db8d5763835f1663bdabda6de744cba8 Author: Andrii Nakryiko Date: Mon Oct 19 17:20:45 2026 +0200 bpf: fix potential 32-bit overflow when accessing ARRAY map element [ Upstream commit 87ac0d600943994444e24382a87aa19acc4cd3d4 ] If BPF array map is bigger than 4GB, element pointer calculation can overflow because both index and elem_size are u32. Fix this everywhere by forcing 64-bit multiplication. Extract this formula into separate small helper and use it consistently in various places. Speculative-preventing formula utilizing index_mask trick is left as is, but explicit u64 casts are added in both places. Fixes: c85d69135a91 ("bpf: move memory size checks to bpf_map_charge_init()") Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20220715053146.1291891-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin [removed the changes that applied to code not yet introduced] Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit ddf6f5179638ef0716d32e8fc04a72822b135351 Author: Geliang Tang Date: Mon Oct 19 18:35:44 2026 +0200 skmsg: Skip zero length skb in sk_msg_recvmsg [ Upstream commit f0c18025693707ec344a70b6887f7450bf4c826b ] When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. [moved the change from sk_msg_recvmsg in net/core/skmsg.c to __tcp_bpf_recvmsg in net/ipv4/tcp_bpf.c, as we are before 2bc793e3272a13e337416c057cb81c5396ad91d1 ("skmsg: Extract __tcp_bpf_recvmsg() and tcp_bpf_wait_data()") Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend Signed-off-by: Geliang Tang Signed-off-by: Daniel Borkmann Reviewed-by: John Fastabend Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 65efb481eb4572fce0f20aa6c13e880816b81579 Author: Kumar Kartikeya Dwivedi Date: Mon Oct 19 17:54:52 2026 +0200 bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO [ Upstream commit 2fc31465c5373b5ca4edf2e5238558cb62902311 ] Precision markers need to be propagated whenever we have an ARG_CONST_* style argument, as the verifier cannot consider imprecise scalars to be equivalent for the purposes of states_equal check when such arguments refine the return value (in this case, set mem_size for PTR_TO_MEM). The resultant mem_size for the R0 is derived from the constant value, and if the verifier incorrectly prunes states considering them equivalent where such arguments exist (by seeing that both registers have reg->precise as false in regsafe), we can end up with invalid programs passing the verifier which can do access beyond what should have been the correct mem_size in that explored state. To show a concrete example of the problem: 0000000000000000 : 0: r2 = *(u32 *)(r1 + 80) 1: r1 = *(u32 *)(r1 + 76) 2: r3 = r1 3: r3 += 4 4: if r3 > r2 goto +18 5: w2 = 0 6: *(u32 *)(r1 + 0) = r2 7: r1 = *(u32 *)(r1 + 0) 8: r2 = 1 9: if w1 == 0 goto +1 10: r2 = -1 0000000000000058 : 11: r1 = 0 ll 13: r3 = 0 14: call bpf_ringbuf_reserve 15: if r0 == 0 goto +7 16: r1 = r0 17: r1 += 16777215 18: w2 = 0 19: *(u8 *)(r1 + 0) = r2 20: r1 = r0 21: r2 = 0 22: call bpf_ringbuf_submit 00000000000000b8 : 23: w0 = 0 24: exit For the first case, the single line execution's exploration will prune the search at insn 14 for the branch insn 9's second leg as it will be verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will always be 0 so at runtime we don't get error for being greater than UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just sees reg->precise as false for both r2 registers in both states, hence considers them equal for purposes of states_equal. If we propagated precise markers using the backtracking support, we would use the precise marking to then ensure that old r2 (UINT_MAX) was within the new r2 (1) and this would never be true, so the verification would rightfully fail. The end result is that the out of bounds access at instruction 19 would be permitted without this fix. Note that reg->precise is always set to true when user does not have CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static or global functions)), hence this is only a problem when precision marks need to be explicitly propagated (i.e. privileged users with CAP_BPF). A simplified test case has been included in the next patch to prevent future regressions. [ The context change is due to the commit 8ab4cdcf03d0 ("bpf: Tidy up verifier check_func_arg()") in v6.0 which is irrelevant to the logic of this patch. ] Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Signed-off-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20220823185300.406-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Johnny Hao Signed-off-by: Greg Kroah-Hartman Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 485a5286675b15b00ee850d90eaa178cc588445f Author: Jinu Kim Date: Fri Aug 7 20:28:18 2026 +0900 KVM: x86: Use active memslots for the per-vCPU MMIO cache commit b3e6212dea2e4328a841ceb37f377583176dc735 upstream. KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass. Fixes: 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") Cc: stable@vger.kernel.org Signed-off-by: Jinu Kim Link: https://patch.msgid.link/20260807112818.958190-1-kimjw04271234@gmail.com Signed-off-by: Sean Christopherson Signed-off-by: Greg Kroah-Hartman commit d790bd61ca5c52b36f2cb14ecab88bb5801d6dab Author: Dave Chinner Date: Tue Oct 13 15:09:48 2026 +0530 xfs: fix unmount hang with unflushable inodes stuck in the AIL [ Upstream commit 7b5f775be14ac1532c049022feadcfe44769566d ] Unmount of a shutdown filesystem can hang with stale inode cluster buffers in the AIL like so: [95964.140623] Call Trace: [95964.144641] __schedule+0x699/0xb70 [95964.154003] schedule+0x64/0xd0 [95964.156851] xfs_ail_push_all_sync+0x9b/0xf0 [95964.164816] xfs_unmount_flush_inodes+0x41/0x70 [95964.168698] xfs_unmountfs+0x7f/0x170 [95964.171846] xfs_fs_put_super+0x3b/0x90 [95964.175216] generic_shutdown_super+0x77/0x160 [95964.178060] kill_block_super+0x1b/0x40 [95964.180553] xfs_kill_sb+0x12/0x30 [95964.182796] deactivate_locked_super+0x38/0x100 [95964.185735] deactivate_super+0x41/0x50 [95964.188245] cleanup_mnt+0x9f/0x160 [95964.190519] __cleanup_mnt+0x12/0x20 [95964.192899] task_work_run+0x89/0xb0 [95964.195221] resume_user_mode_work+0x4f/0x60 [95964.197931] syscall_exit_to_user_mode+0x76/0xb0 [95964.201003] do_syscall_64+0x74/0x130 $ pstree -N mnt |grep umount |-check-parallel---nsexec---run_test.sh---753---umount It always seems to be generic/753 that triggers this, and repeating a quick group test run triggers it every 10-15 iterations. Hence it generally triggers once up every 30-40 minutes of test time. just running generic/753 by itself or concurrently with a limited group of tests doesn't reproduce this issue at all. Tracing on a hung system shows the AIL repeating every 50ms a log force followed by an attempt to push pinned, aborted inodes from the AIL (trimmed for brevity): xfs_log_force: lsn 0x1c caller xfsaild+0x18e xfs_log_force: lsn 0x0 caller xlog_cil_flush+0xbd xfs_log_force: lsn 0x1c caller xfs_log_force+0x77 xfs_ail_pinned: lip 0xffff88826014afa0 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED xfs_ail_pinned: lip 0xffff88814000a708 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED xfs_ail_pinned: lip 0xffff88810b850c80 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED xfs_ail_pinned: lip 0xffff88810b850af0 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED xfs_ail_pinned: lip 0xffff888165cf0a28 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED xfs_ail_pinned: lip 0xffff88810b850bb8 lsn 1/37472 type XFS_LI_INODE flags IN_AIL|ABORTED .... The inode log items are marked as aborted, which means that either: a) a transaction commit has occurred, seen an error or shutdown, and called xfs_trans_free_items() to abort the items. This should happen before any pinning of log items occurs. or b) a dirty transaction has been cancelled. This should also happen before any pinning of log items occurs. or c) AIL insertion at journal IO completion is marked as aborted. In this case, the log item is pinned by the CIL until journal IO completes and hence needs to be unpinned. This is then done after the ->iop_committed() callback is run, so the pin count should be balanced correctly. Yet none of these seemed to be occurring. Further tracing indicated this: d) Shutdown during CIL pushing resulting in log item completion being called from checkpoint abort processing. Items are unpinned and released without serialisation against each other, journal IO completion or transaction commit completion. In this case, we may still have a transaction commit in flight that holds a reference to a xfs_buf_log_item (BLI) after CIL insertion. e.g. a synchronous transaction will flush the CIL before the transaction is torn down. The concurrent CIL push then aborts insertion it and drops the commit/AIL reference to the BLI. This can leave the transaction commit context with the last reference to the BLI which is dropped here: xfs_trans_free_items() ->iop_release xfs_buf_item_release xfs_buf_item_put if (XFS_LI_ABORTED) xfs_trans_ail_delete xfs_buf_item_relse() Unlike the journal completion ->iop_unpin path, this path does not run stale buffer completion process when it drops the last reference, hence leaving the stale inodes attached to the buffer sitting the AIL. There are no other references to those inodes, so there is no other mechanism to remove them from the AIL. Hence unmount hangs. The buffer lock context for stale buffers is passed to the last BLI reference. This is normally the last BLI unpin on journal IO completion. The unpin then processes the stale buffer completion and releases the buffer lock. However, if the final unpin from journal IO completion (or CIL push abort) does not hold the last reference to the BLI, there -must- still be a transaction context that references the BLI, and so that context must perform the stale buffer completion processing before the buffer is unlocked and the BLI torn down. The fix for this is to rework the xfs_buf_item_relse() path to run stale buffer completion processing if it drops the last reference to the BLI. We still hold the buffer locked, so the buffer owner and lock context is the same as if we passed the BLI and buffer to the ->iop_unpin() context to finish stale process on journal commit. However, we have to be careful here. In a shutdown state, we can be freeing dirty BLIs from xfs_buf_item_put() via xfs_trans_brelse() and xfs_trans_bdetach(). The existing code handles this case by considering shutdown state as "aborted", but in doing so largely masks the failure to clean up stale BLI state from the xfs_buf_item_relse() path. i.e regardless of the shutdown state and whether the item is in the AIL, we must finish the stale buffer cleanup if we are are dropping the last BLI reference from the ->iop_relse path in transaction commit context. Signed-off-by: Dave Chinner Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 8f9237e79819cbea0d53283eae700149cdacb1d8 Author: Dave Chinner Date: Tue Oct 13 15:09:47 2026 +0530 xfs: factor out stale buffer item completion [ Upstream commit 816c330b605c3f4813c0dc0ab5af5cce17ff06b3 ] The stale buffer item completion handling is currently only done from BLI unpinning. We need to perform this function from where-ever the last reference to the BLI is dropped, so first we need to factor this code out into a helper. Signed-off-by: Dave Chinner Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 4736b0666dcce8a5b99093b95efa99b3d7f98ad1 Author: Dave Chinner Date: Tue Oct 13 15:09:46 2026 +0530 xfs: rearrange code in xfs_buf_item.c [ Upstream commit d2fe5c4c8d25999862d615f616aea7befdd62799 ] The code to initialise, release and free items is all the way down the bottom of the file. Upcoming fixes need to these functions earlier in the file, so move them to the top. There is one code change in this move - the parameter to xfs_buf_item_relse() is changed from the xfs_buf to the xfs_buf_log_item - the thing that the function is releasing. Signed-off-by: Dave Chinner Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino 6.6: Fixed conflict due to the following missing commits: [Continuous range: 10634530f7ba^..d4c75a1b40cd] d4c75a1b40cd ("xfs: convert remaining kmem_free() to kfree()") 49292576136f ("xfs: convert kmem_free() for kvmalloc users to kvfree()") afdc115559c5 ("xfs: move kmem_to_page()") f078d4ea8276 ("xfs: convert kmem_alloc() to kmalloc()") 10634530f7ba ("xfs: convert kmem_zalloc() to kzalloc()") Removed ASSERT in favour of existing atomic_read-and-return in xfs_buf_item_relse() due to the following missing commit: 3762113b597f ("xfs: don't lose solo superblock counter update transactions") 5.15: Fixed conflict due to the following missing commit: 182696fb021f ("xfs: rename _zone variables to _cache") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit fe3d67ffb609f0b0b958cad03d9cc8c11f715c92 Author: Dave Chinner Date: Tue Oct 13 15:09:45 2026 +0530 xfs: catch stale AGF/AGF metadata [ Upstream commit db6a2274162de615ff74b927d38942fe3134d298 ] There is a race condition that can trigger in dmflakey fstests that can result in asserts in xfs_ialloc_read_agi() and xfs_alloc_read_agf() firing. The asserts look like this: XFS: Assertion failed: pag->pagf_freeblks == be32_to_cpu(agf->agf_freeblks), file: fs/xfs/libxfs/xfs_alloc.c, line: 3440 ..... Call Trace: xfs_alloc_read_agf+0x2ad/0x3a0 xfs_alloc_fix_freelist+0x280/0x720 xfs_alloc_vextent_prepare_ag+0x42/0x120 xfs_alloc_vextent_iterate_ags+0x67/0x260 xfs_alloc_vextent_start_ag+0xe4/0x1c0 xfs_bmapi_allocate+0x6fe/0xc90 xfs_bmapi_convert_delalloc+0x338/0x560 xfs_map_blocks+0x354/0x580 iomap_writepages+0x52b/0xa70 xfs_vm_writepages+0xd7/0x100 do_writepages+0xe1/0x2c0 __writeback_single_inode+0x44/0x340 writeback_sb_inodes+0x2d0/0x570 __writeback_inodes_wb+0x9c/0xf0 wb_writeback+0x139/0x2d0 wb_workfn+0x23e/0x4c0 process_scheduled_works+0x1d4/0x400 worker_thread+0x234/0x2e0 kthread+0x147/0x170 ret_from_fork+0x3e/0x50 ret_from_fork_asm+0x1a/0x30 I've seen the AGI variant from scrub running on the filesysetm after unmount failed due to systemd interference: XFS: Assertion failed: pag->pagi_freecount == be32_to_cpu(agi->agi_freecount) || xfs_is_shutdown(pag->pag_mount), file: fs/xfs/libxfs/xfs_ialloc.c, line: 2804 ..... Call Trace: xfs_ialloc_read_agi+0xee/0x150 xchk_perag_drain_and_lock+0x7d/0x240 xchk_ag_init+0x34/0x90 xchk_inode_xref+0x7b/0x220 xchk_inode+0x14d/0x180 xfs_scrub_metadata+0x2e2/0x510 xfs_ioc_scrub_metadata+0x62/0xb0 xfs_file_ioctl+0x446/0xbf0 __se_sys_ioctl+0x6f/0xc0 __x64_sys_ioctl+0x1d/0x30 x64_sys_call+0x1879/0x2ee0 do_syscall_64+0x68/0x130 ? exc_page_fault+0x62/0xc0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Essentially, it is the same problem. When _flakey_drop_and_remount() loads the drop-writes table, it makes all writes silently fail. Writes are reported to the fs as completed successfully, but they are not issued to the backing store. The filesystem sees the successful write completion and marks the metadata buffer clean and removes it from the AIL. If this happens at the same time as memory pressure is occuring, the now-clean AGF and/or AGI buffers can be reclaimed from memory. Shortly afterwards, but before _flakey_drop_and_remount() runs unmount, background writeback is kicked and it tries to allocate blocks for the dirty pages in memory. This then tries to access the AGF buffer we just turfed out of memory. It's not found, so it gets read in from disk. This is all fine, except for the fact that the last writeback of the AGF did not actually reach disk. The AGF on disk is stale compared to the in-memory state held by the perag, and so they don't match and the assert fires. Then other operations on that inode hang because the task was killed whilst holding inode locks. e.g: Workqueue: xfs-conv/dm-12 xfs_end_io Call Trace: __schedule+0x650/0xb10 schedule+0x6d/0xf0 schedule_preempt_disabled+0x15/0x30 rwsem_down_write_slowpath+0x31a/0x5f0 down_write+0x43/0x60 xfs_ilock+0x1a8/0x210 xfs_trans_alloc_inode+0x9c/0x240 xfs_iomap_write_unwritten+0xe3/0x300 xfs_end_ioend+0x90/0x130 xfs_end_io+0xce/0x100 process_scheduled_works+0x1d4/0x400 worker_thread+0x234/0x2e0 kthread+0x147/0x170 ret_from_fork+0x3e/0x50 ret_from_fork_asm+0x1a/0x30 and it's all down hill from there. Memory pressure is one way to trigger this, another is to run "echo 3 > /proc/sys/vm/drop_caches" randomly while tests are running. Regardless of how it is triggered, this effectively takes down the system once umount hangs because it's holding a sb->s_umount lock exclusive and now every sync(1) call gets stuck on it. Fix this by replacing the asserts with a corruption detection check and a shutdown. Signed-off-by: Dave Chinner Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino 6.12: Fixed conflict due to the following missing commit: e9c4d8bfb26c ("xfs: factor out a generic xfs_group structure") 6.6: Fixed conflict due to the following missing commit: e45ea3645178 ("xfs: split the agf_roots and agf_levels arrays") 5.15: Fixed conflict due to the following missing commits: 6f643c57d57c ("xfs: implement ->notify_failure() for XFS") [Continuous range: a95fee40e3d4^..08d3e84feeb8] 08d3e84feeb8 ("xfs: pass perag to xfs_alloc_read_agf()") 76b47e528e3a ("xfs: kill xfs_alloc_pagf_init()") 99b13c7f0bd3 ("xfs: pass perag to xfs_ialloc_read_agi()") a95fee40e3d4 ("xfs: kill xfs_ialloc_pagi_init()") 5.10: Fixed conflicts due to the following missing commits: fs/xfs/libxfs/xfs_alloc.c, fs/xfs/libxfs/xfs_ialloc.c: 75c8c50fa16a ("xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown") fs/xfs/libxfs/xfs_ialloc.c: 9bbafc71919a ("xfs: move xfs_perag_get/put to xfs_ag.[ch]") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit a56964f96a564126e2049e705926842ab7096b16 Author: Dave Chinner Date: Tue Oct 13 15:09:44 2026 +0530 xfs: xfs_ifree_cluster vs xfs_iflush_shutdown_abort deadlock [ Upstream commit 09234a632be42573d9743ac5ff6773622d233ad0 ] Lock order of xfs_ifree_cluster() is cluster buffer -> try ILOCK -> IFLUSHING, except for the last inode in the cluster that is triggering the free. In that case, the lock order is ILOCK -> cluster buffer -> IFLUSHING. xfs_iflush_cluster() uses cluster buffer -> try ILOCK -> IFLUSHING, so this can safely run concurrently with xfs_ifree_cluster(). xfs_inode_item_precommit() uses ILOCK -> cluster buffer, but this cannot race with xfs_ifree_cluster() so being in a different order will not trigger a deadlock. xfs_reclaim_inode() during a filesystem shutdown uses ILOCK -> IFLUSHING -> cluster buffer via xfs_iflush_shutdown_abort(), and this deadlocks against xfs_ifree_cluster() like so: sysrq: Show Blocked State task:kworker/10:37 state:D stack:12560 pid:276182 tgid:276182 ppid:2 flags:0x00004000 Workqueue: xfs-inodegc/dm-3 xfs_inodegc_worker Call Trace: __schedule+0x650/0xb10 schedule+0x6d/0xf0 schedule_timeout+0x8b/0x180 schedule_timeout_uninterruptible+0x1e/0x30 xfs_ifree+0x326/0x730 xfs_inactive_ifree+0xcb/0x230 xfs_inactive+0x2c8/0x380 xfs_inodegc_worker+0xaa/0x180 process_scheduled_works+0x1d4/0x400 worker_thread+0x234/0x2e0 kthread+0x147/0x170 ret_from_fork+0x3e/0x50 ret_from_fork_asm+0x1a/0x30 task:fsync-tester state:D stack:12160 pid:2255943 tgid:2255943 ppid:3988702 flags:0x00004006 Call Trace: __schedule+0x650/0xb10 schedule+0x6d/0xf0 schedule_timeout+0x31/0x180 __down_common+0xbe/0x1f0 __down+0x1d/0x30 down+0x48/0x50 xfs_buf_lock+0x3d/0xe0 xfs_iflush_shutdown_abort+0x51/0x1e0 xfs_icwalk_ag+0x386/0x690 xfs_reclaim_inodes_nr+0x114/0x160 xfs_fs_free_cached_objects+0x19/0x20 super_cache_scan+0x17b/0x1a0 do_shrink_slab+0x180/0x350 shrink_slab+0xf8/0x430 drop_slab+0x97/0xf0 drop_caches_sysctl_handler+0x59/0xc0 proc_sys_call_handler+0x189/0x280 proc_sys_write+0x13/0x20 vfs_write+0x33d/0x3f0 ksys_write+0x7c/0xf0 __x64_sys_write+0x1b/0x30 x64_sys_call+0x271d/0x2ee0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x76/0x7e We can't change the lock order of xfs_ifree_cluster() - XFS_ISTALE and XFS_IFLUSHING are serialised through to journal IO completion by the cluster buffer lock being held. There's quite a few asserts in the code that check that XFS_ISTALE does not occur out of sync with buffer locking (e.g. in xfs_iflush_cluster). There's also a dependency on the inode log item being removed from the buffer before XFS_IFLUSHING is cleared, also with asserts that trigger on this. Further, we don't have a requirement for the inode to be locked when completing or aborting inode flushing because all the inode state updates are serialised by holding the cluster buffer lock across the IO to completion. We can't check for XFS_IRECLAIM in xfs_ifree_mark_inode_stale() and skip the inode, because there is no guarantee that the inode will be reclaimed. Hence it *must* be marked XFS_ISTALE regardless of whether reclaim is preparing to free that inode. Similarly, we can't check for IFLUSHING before locking the inode because that would result in dirty inodes not being marked with ISTALE in the event of racing with XFS_IRECLAIM. Hence we have to address this issue from the xfs_reclaim_inode() side. It is clear that we cannot hold the inode locked here when calling xfs_iflush_shutdown_abort() because it is the inode->buffer lock order that causes the deadlock against xfs_ifree_cluster(). Hence we need to drop the ILOCK before aborting the inode in the shutdown case. Once we've aborted the inode, we can grab the ILOCK again and then immediately reclaim it as it is now guaranteed to be clean. Note that dropping the ILOCK in xfs_reclaim_inode() means that it can now be locked by xfs_ifree_mark_inode_stale() and seen whilst in this state. This is safe because we have left the XFS_IFLUSHING flag on the inode and so xfs_ifree_mark_inode_stale() will simply set XFS_ISTALE and move to the next inode. An ASSERT check in this path needs to be tweaked to take into account this new shutdown interaction. Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino 5.10: Add header. Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit f714bc6b13b2b9a2c3ed6f526435616184b7e073 Author: Dave Chinner Date: Tue Oct 13 15:09:43 2026 +0530 xfs: buffer pins need to hold a buffer reference [ Upstream commit 89a4bf0dc3857569a77061d3d5ea2ac85f7e13c6 ] When a buffer is unpinned by xfs_buf_item_unpin(), we need to access the buffer after we've dropped the buffer log item reference count. This opens a window where we can have two racing unpins for the buffer item (e.g. shutdown checkpoint context callback processing racing with journal IO iclog completion processing) and both attempt to access the buffer after dropping the BLI reference count. If we are unlucky, the "BLI freed" context wins the race and frees the buffer before the "BLI still active" case checks the buffer pin count. This results in a use after free that can only be triggered in active filesystem shutdown situations. To fix this, we need to ensure that buffer existence extends beyond the BLI reference count checks and until the unpin processing is complete. This implies that a buffer pin operation must also take a buffer reference to ensure that the buffer cannot be freed until the buffer unpin processing is complete. Reported-by: yangerkun Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Dave Chinner Signed-off-by: Leah Rumancik Acked-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 81274891036602355e72eabbb5184490f354b506) Stable-dep-of: 816c330b605c ("xfs: factor out stale buffer item completion") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 38c4919336372966eaeb9dc630fad50a5e604754 Author: Darrick J. Wong Date: Tue Oct 13 15:09:42 2026 +0530 xfs: fix intermittent hang during quotacheck [ Upstream commit f0c2d7d2abca24d19831c99edea458704fac8087 ] Every now and then, I see the following hang during mount time quotacheck when running fstests. Turning on KASAN seems to make it happen somewhat more frequently. I've edited the backtrace for brevity. XFS (sdd): Quotacheck needed: Please wait. XFS: Assertion failed: bp->b_flags & _XBF_DELWRI_Q, file: fs/xfs/xfs_buf.c, line: 2411 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1831409 at fs/xfs/xfs_message.c:104 assfail+0x46/0x4a [xfs] CPU: 0 PID: 1831409 Comm: mount Tainted: G W 5.19.0-rc6-xfsx #rc6 09911566947b9f737b036b4af85e399e4b9aef64 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:assfail+0x46/0x4a [xfs] Code: a0 8f 41 a0 e8 45 fe ff ff 8a 1d 2c 36 10 00 80 fb 01 76 0f 0f b6 f3 48 c7 c7 c0 f0 4f a0 e8 10 f0 02 e1 80 e3 01 74 02 0f 0b <0f> 0b 5b c3 48 8d 45 10 48 89 e2 4c 89 e6 48 89 1c 24 48 89 44 24 RSP: 0018:ffffc900078c7b30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880099ac000 RCX: 000000007fffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa0418fa0 RBP: ffff8880197bc1c0 R08: 0000000000000000 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: ffffc900078c7d20 R13: 00000000fffffff5 R14: ffffc900078c7d20 R15: 0000000000000000 FS: 00007f0449903800(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005610ada631f0 CR3: 0000000014dd8002 CR4: 00000000001706f0 Call Trace: xfs_buf_delwri_pushbuf+0x150/0x160 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_qm_flush_one+0xd6/0x130 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_qm_dquot_walk.isra.0+0x109/0x1e0 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_qm_quotacheck+0x319/0x490 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_qm_mount_quotas+0x65/0x2c0 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_mountfs+0x6b5/0xab0 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] xfs_fs_fill_super+0x781/0x990 [xfs 4561f5b32c9bfb874ec98d58d0719464e1f87368] get_tree_bdev+0x175/0x280 vfs_get_tree+0x1a/0x80 path_mount+0x6f5/0xaa0 __x64_sys_mount+0x103/0x140 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 I /think/ this can happen if xfs_qm_flush_one is racing with xfs_qm_dquot_isolate (i.e. dquot reclaim) when the second function has taken the dquot flush lock but xfs_qm_dqflush hasn't yet locked the dquot buffer, let alone queued it to the delwri list. In this case, flush_one will fail to get the dquot flush lock, but it can lock the incore buffer, but xfs_buf_delwri_pushbuf will then trip over this ASSERT, which checks that the buffer isn't on a delwri list. The hang results because the _delwri_submit_buffers ignores non DELWRI_Q buffers, which means that xfs_buf_iowait waits forever for an IO that has not yet been scheduled. AFAICT, a reasonable solution here is to detect a dquot buffer that is not on a DELWRI list, drop it, and return -EAGAIN to try the flush again. It's not /that/ big of a deal if quotacheck writes the dquot buffer repeatedly before we even set QUOTA_CHKD. Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Leah Rumancik Acked-by: Chandan Babu R Signed-off-by: Sasha Levin (cherry picked from commit 8d0baec78e8a7abe03b449820507c9777dae7f7b) Stable-dep-of: d62016b1a2df ("xfs: avoid dquot buffer pin deadlock") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit b62685a7baee3053971182c5e8cb7d5c9bea377f Author: Guo Xuenan Date: Tue Oct 13 15:09:41 2026 +0530 xfs: fix super block buf log item UAF during force shutdown [ Upstream commit 575689fc0ffa6c4bb4e72fd18e31a6525a6124e0 ] xfs log io error will trigger xlog shut down, and end_io worker call xlog_state_shutdown_callbacks to unpin and release the buf log item. The race condition is that when there are some thread doing transaction commit and happened not to be intercepted by xlog_is_shutdown, then, these log item will be insert into CIL, when unpin and release these buf log item, UAF will occur. BTW, add delay before `xlog_cil_commit` can increase recurrence probability. The following call graph actually encountered this bad situation. fsstress io end worker kworker/0:1H-216 xlog_ioend_work ->xlog_force_shutdown ->xlog_state_shutdown_callbacks ->xlog_cil_process_committed ->xlog_cil_committed ->xfs_trans_committed_bulk ->xfs_trans_apply_sb_deltas ->li_ops->iop_unpin(lip, 1); ->xfs_trans_getsb ->_xfs_trans_bjoin ->xfs_buf_item_init ->if (bip) { return 0;} //relog ->xlog_cil_commit ->xlog_cil_insert_items //insert into CIL ->xfs_buf_ioend_fail(bp); ->xfs_buf_ioend ->xfs_buf_item_done ->xfs_buf_item_relse ->xfs_buf_item_free when cil push worker gather percpu cil and insert super block buf log item into ctx->log_items then uaf occurs. ================================================================== BUG: KASAN: use-after-free in xlog_cil_push_work+0x1c8f/0x22f0 Write of size 8 at addr ffff88801800f3f0 by task kworker/u4:4/105 CPU: 0 PID: 105 Comm: kworker/u4:4 Tainted: G W 6.1.0-rc1-00001-g274115149b42 #136 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: xfs-cil/sda xlog_cil_push_work Call Trace: dump_stack_lvl+0x4d/0x66 print_report+0x171/0x4a6 kasan_report+0xb3/0x130 xlog_cil_push_work+0x1c8f/0x22f0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 Allocated by task 2145: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x14a/0x510 xfs_buf_item_init+0x160/0x6d0 _xfs_trans_bjoin+0x7f/0x2e0 xfs_trans_getsb+0xb6/0x3f0 xfs_trans_apply_sb_deltas+0x1f/0x8c0 __xfs_trans_commit+0xa25/0xe10 xfs_symlink+0xe23/0x1660 xfs_vn_symlink+0x157/0x280 vfs_symlink+0x491/0x790 do_symlinkat+0x128/0x220 __x64_sys_symlink+0x7a/0x90 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 216: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 __kasan_slab_free+0x105/0x1a0 kmem_cache_free+0xb6/0x460 xfs_buf_ioend+0x1e9/0x11f0 xfs_buf_item_unpin+0x3d6/0x840 xfs_trans_committed_bulk+0x4c2/0x7c0 xlog_cil_committed+0xab6/0xfb0 xlog_cil_process_committed+0x117/0x1e0 xlog_state_shutdown_callbacks+0x208/0x440 xlog_force_shutdown+0x1b3/0x3a0 xlog_ioend_work+0xef/0x1d0 process_one_work+0x6f9/0xf70 worker_thread+0x578/0xf30 kthread+0x28c/0x330 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88801800f388 which belongs to the cache xfs_buf_item of size 272 The buggy address is located 104 bytes inside of 272-byte region [ffff88801800f388, ffff88801800f498) The buggy address belongs to the physical page: page:ffffea0000600380 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88801800f208 pfn:0x1800e head:ffffea0000600380 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffffea0000699788 ffff88801319db50 ffff88800fb50640 raw: ffff88801800f208 000000000015000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801800f280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f300: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801800f380: fc fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801800f400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801800f480: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Signed-off-by: Guo Xuenan Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Leah Rumancik Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 0d889ae85fcf0cf9bc6e998fca2ec760e08e0b46) Stable-dep-of: d2fe5c4c8d25 ("xfs: rearrange code in xfs_buf_item.c") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit ef3875e19a1015b98204cafe7c33dde155a41c3f Author: Dave Chinner Date: Tue Oct 13 15:09:40 2026 +0530 xfs: remove xfs_buf_t typedef [ Upstream commit e82226138b20d4f638426413e83c6b5db532c6a2 ] Prepare for kernel xfs_buf alignment by getting rid of the xfs_buf_t typedef from userspace. [darrick: This patch is a port of a userspace patch removing the xfs_buf_t typedef in preparation to make the userspace xfs_buf code behave more like its kernel counterpart.] Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Stable-dep-of: d2fe5c4c8d25 ("xfs: rearrange code in xfs_buf_item.c") 5.10: 2 extra conversions in fs/xfs/xfs_inode.c due to missing: 1abcf261016e ("xfs: move on-disk inode allocation out of xfs_ialloc()") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 033810674cc08ffe49c9ea8e0235c47eae2706d1 Author: Dave Chinner Date: Tue Oct 13 15:09:39 2026 +0530 xfs: aborting inodes on shutdown may need buffer lock [ Upstream commit d2d7c0473586d2f22e85d615275f34cf19f94447 ] Most buffer io list operations are run with the bp->b_lock held, but xfs_iflush_abort() can be called without the buffer lock being held resulting in inodes being removed from the buffer list while other list operations are occurring. This causes problems with corrupted bp->b_io_list inode lists during filesystem shutdown, leading to traversals that never end, double removals from the AIL, etc. Fix this by passing the buffer to xfs_iflush_abort() if we have it locked. If the inode is attached to the buffer, we're going to have to remove it from the buffer list and we'd have to get the buffer off the inode log item to do that anyway. If we don't have a buffer passed in (e.g. from xfs_reclaim_inode()) then we can determine if the inode has a log item and if it is attached to a buffer before we do anything else. If it does have an attached buffer, we can lock it safely (because the inode has a reference to it) and then perform the inode abort. Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Stable-dep-of: 09234a632be4 ("xfs: xfs_ifree_cluster vs xfs_iflush_shutdown_abort deadlock") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit d60336cf378b67fbe4f7a0b2c2ce89b9415ec50a Author: Dave Chinner Date: Tue Oct 13 15:09:38 2026 +0530 xfs: log items should have a xlog pointer, not a mount [ Upstream commit d86142dd7c4e10e50bdb3679b405d748214b2c28 ] Log items belong to the log, not the xfs_mount. Convert the mount pointer in the log item to a xlog pointer in preparation for upcoming log centric changes to the log items. Signed-off-by: Dave Chinner Reviewed-by: Chandan Babu R Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") 5.10: Fixed conflicts due to the following missing commits: 38c26bfd90e1 ("xfs: replace xfs_sb_version checks with feature flag checks") 75c8c50fa16a ("xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdown") Extra conversion in fs/xfs/xfs_dquot_item.c due to missing: 40b52225e58c ("xfs: remove support for disabling quota accounting on a mounted file system") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit a4d7bec87a36951c266f15f56fedcb8c37f73221 Author: Dave Chinner Date: Tue Oct 13 15:09:37 2026 +0530 xfs: convert XLOG_FORCED_SHUTDOWN() to xlog_is_shutdown() [ Upstream commit 2039a272300b949c05888428877317b834c0b1fb ] Make it less shouty and a static inline before adding more calls through the log code. Also convert internal log code that uses XFS_FORCED_SHUTDOWN(mount) to use xlog_is_shutdown(log) as well. Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Darrick J. Wong Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") 5.10: Fixed conflicts due to the following missing commits: 956f6daa84bf ("xfs: add iclog state trace events") 303591a0a947 ("xfs: cover the log during log quiesce") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 0943f4bd590e4c0338eb9b57a0dcaed8627fdd05 Author: Dave Chinner Date: Tue Oct 13 15:09:36 2026 +0530 xfs: don't nest icloglock inside ic_callback_lock [ Upstream commit 6be001021f0b307c8c1544e8b3ac87de20d711de ] It's completely unnecessary because callbacks are added to iclogs without holding the icloglock, hence no amount of ordering between the icloglock and ic_callback_lock will order the removal of callbacks from the iclog. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") 5.10: Fixed conflict due to the following missing commit: 956f6daa84bf ("xfs: add iclog state trace events") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 6bac5617b9d58ad18142d06d48cb3d717f7f18e8 Author: Darrick J. Wong Date: Tue Oct 13 15:09:35 2026 +0530 xfs: improve the code that checks recovered refcount intent items [ Upstream commit 0d79781a1aa6a6a567e63294012eee2384f406f2 ] The code that validates recovered refcount intent items is kind of a mess -- it doesn't use the standard xfs type validators, and it doesn't check for things that it should. Fix the validator function to use the standard validation helpers and look for more types of obvious errors. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 035c2352190838914fa84b653e07a9033357d57c Author: Darrick J. Wong Date: Tue Oct 13 15:09:34 2026 +0530 xfs: hoist recovered refcount intent checks out of xfs_cui_item_recover [ Upstream commit ed64f8343aafa62e762c74dfb400f640b6fa6c15 ] When we recover a refcount intent from the log, we need to validate its contents before we try to replay them. Hoist the checking code into a separate function in preparation to refactor this code to use validation helpers. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 3178df639d33daf7a2af05890298ac09ec9595f9 Author: Darrick J. Wong Date: Tue Oct 13 15:09:33 2026 +0530 xfs: improve the code that checks recovered rmap intent items [ Upstream commit c447ad62dc906f4b5f788e8ff20c1768ab2eab2c ] The code that validates recovered rmap intent items is kind of a mess -- it doesn't use the standard xfs type validators, and it doesn't check for things that it should. Fix the validator function to use the standard validation helpers and look for more types of obvious errors. Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 38d8098c853953f26ca44b78f99992ae024ef7ed Author: Darrick J. Wong Date: Tue Oct 13 15:09:32 2026 +0530 xfs: hoist recovered rmap intent checks out of xfs_rui_item_recover [ Upstream commit dda7ba65bf03b6f3a7502b9f85c2524a5ae5aa2e ] When we recover a rmap intent from the log, we need to validate its contents before we try to replay them. Hoist the checking code into a separate function in preparation to refactor this code to use validation helpers. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 6f07b3eae018c396fc31af5de979fd4c274489b6 Author: Darrick J. Wong Date: Tue Oct 13 15:09:31 2026 +0530 xfs: improve the code that checks recovered bmap intent items [ Upstream commit 67d8679bd3913d2c4ec5f32ade778881b93af766 ] The code that validates recovered bmap intent items is kind of a mess -- it doesn't use the standard xfs type validators, and it doesn't check for things that it should. Fix the validator function to use the standard validation helpers and look for more types of obvious errors. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit e08e4bcec5865fad99fcb0aca2a1202bf0b30bfa Author: Darrick J. Wong Date: Tue Oct 13 15:09:30 2026 +0530 xfs: hoist recovered bmap intent checks out of xfs_bui_item_recover [ Upstream commit bc525cf455dac810d28f9edd379805dc249bc5a9 ] When we recover a bmap intent from the log, we need to validate its contents before we try to replay them. Hoist the checking code into a separate function in preparation to refactor this code to use validation helpers. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Stable-dep-of: 7b5f775be14a ("xfs: fix unmount hang with unflushable inodes stuck in the AIL") Signed-off-by: Siddh Raman Pant Signed-off-by: Sasha Levin commit 718be204b941a3fe9df1760aebb5254f9f8d3e61 Author: Tahera Fahimi Date: Thu Oct 15 13:22:39 2026 -0700 xfrm: prevent policy_hthresh.work from racing with netns teardown An XFRM_MSG_NEWSPDINFO request can queue the per-net work item policy_hthresh.work onto the system workqueue. xfrm_hash_rebuild() retrieves the enclosing struct net from the work item, so the callback can dereference freed memory if it runs after net namespace teardown. Mainline commit 29fe3a61bcdc ("xfrm: prevent policy_hthresh.work from racing with netns teardown") fixes this issue using disable_work_sync(). That API is not available in Linux 5.10, so the mainline change cannot be directly backported. Provide the same guarantee with an XFRM-local work_disabled flag. Protect the flag and schedule_work() with the existing policy_hthresh seqlock so teardown can atomically stop new queueing attempts. Then use cancel_work_sync() to synchronize work that was queued before the flag was set. This ensures policy_hthresh.work cannot outlive its struct net. Fixes: 880a6fab8f6b ("xfrm: configure policy hash table thresholds by netlink") Assisted-by: GitHub-Copilot:GPT-5.6 Sol Signed-off-by: Tahera Fahimi Reviewed-by: Allen Pais Signed-off-by: Sasha Levin commit 6c826a2ea536e4d31bdf6b4f619e13b37c28e42d Author: Florian Westphal Date: Thu Aug 4 19:26:27 2022 +0200 netfilter: nf_tables: fix crash when nf_trace is enabled [ Upstream commit 399a14ec7993d605740de7b2cd5c0ce8407d12ed ] do not access info->pkt when info->trace is not 1. nft_traceinfo is not initialized, except when tracing is enabled. The 'nft_trace_enabled' static key cannot be used for this, we must always check info->trace first. Pass nft_pktinfo directly to avoid this. Fixes: e34b9ed96ce3 ("netfilter: nf_tables: avoid skb access on nf_stolen") Reported-by: Hangbin Liu Signed-off-by: Florian Westphal Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2083798ce4147b2bcc24d8929903ec140ff4f67a Author: Matti Vaittinen Date: Wed Apr 21 21:11:32 2021 +0300 devm-helpers: Fix devm_delayed_work_autocancel() kerneldoc [ Upstream commit a943d76352dbb4707a5e5537bbe696c00f5ddd36 ] The kerneldoc for devm_delayed_work_autocancel() contains invalid parameter description. Fix the parameter description. And while at it - make it more obvous that this function operates on delayed_work. That helps differentiating with resource-managed INIT_WORK description (which should follow in near future) Fixes: 0341ce544394 ("workqueue: Add resource managed version of delayed work init") Reviewed-by: Hans de Goede Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/db3a8b4b8899fdf109a0cc760807de12d3b4f09b.1619028482.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit f9b488641cfa63f9b41321530c543688b2e34f03 Author: Christian Brauner Date: Wed Oct 14 07:05:42 2026 -0400 namespace: handle mount locking for automounts correctly [ Upstream commit 33aadc7c72055fca93cb5a3691d836ebf8b31c9b ] If mounts are propagated across user namespaces, attach_recursive_mnt() locks every copy of the source mount to protect overmounts from vanishing and revealing the underlying files or directories. The user namespace is taken from the caller's mount namespaces since this is where the mounts end up. Except, that's not always true. Automounts may legitimately get popped in by tasks located in a different mount and user namespace during path lookup. Then check doesn't make sense at that point. The copy in the namespace of the parent - which may be the host's - is now locked and the host cannot change the flags of its own mounts anymore. Here's the reproducer: - host has debugfs mounted nosuid,nodev,noexec and shared - tracefs automount below it is not yet active - hand a child process a directory descriptor on that mount - child process enters auser and mount namespace - child process' namespace now holds a locked copy of the host's debugfs mount that receives propagation from it - child process stats "tracing/." through the descriptor - lookup runs on the host's mount so the automount lands below the host's mount - propagation puts a copy below the child's copy - both try to clear the flags on the mount they got, with a bind remount: host, on its own automount: MS_REMOUNT|MS_BIND = EPERM child, on the copy in its namespace: MS_REMOUNT|MS_BIND = 0 So the lock landed on the host's mount instead of the child's copy. Congrats. So we need to compare with the owner of the namespace the mount actually gets mounted on. For all regular cases that is the caller's mount namespace and so nothing changes. Detached trees in anonymous mount namespaces by be handed over via SCM_RIGHTS or inherited in other ways on purpose so the attaching task's mount namespace is authoritative, not the creator of the detached tree. Fixes: 132c94e31b8b ("vfs: Carefully propogate mounts across user namespaces") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-6-dd44b89d44ce@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: adjusted context for attach_recursive_mnt() using separate destination arguments instead of a pinned_mountpoint ] Signed-off-by: Sasha Levin commit 5608ca8cc95afa19ee7d590117560e19e49d1f07 Author: Christian Brauner Date: Wed Oct 14 07:05:31 2026 -0400 fcntl: refuse F_SET_RW_HINT on an immutable inode [ Upstream commit b0d1022b9bdb1e98aa7fb3244fdd50a58c61766c ] An immutable inode is never written to so write hints are pointless. Refuse the hint on an immutable inode the way setattr(), fallocate() and etxattr() refuse their changes. Fixes: c75b1d9421f8 ("fs: add fcntl() interface for setting/getting write life time hints") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-3-dd44b89d44ce@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: Moved the check from fcntl_set_rw_hint() to the F_SET_RW_HINT case in fcntl_rw_hint(). ] Signed-off-by: Sasha Levin commit 94d05b62dc7aea236db20166e79ee002e466393a Author: Christian Brauner Date: Tue Oct 13 19:14:38 2026 -0400 namespace: don't copy an unmounted mount tree [ Upstream commit 8bacbf6be959973b28b691713a872c12eae69eec ] may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL. Fixes: e149ed2b805f ("take the targets of /proc/*/ns/* symlinks to separate fs") Fixes: ef4144ac2dec ("pidfs: allow bind-mounts") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260926-work-mount-fixes-2-v1-4-f357abf3d17b@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: adjusted context for the inline mount check instead of may_copy_tree() ] Signed-off-by: Sasha Levin commit b3fa3811ffffa130586c4ff8f7299b7fc69216d5 Author: Christian Brauner Date: Tue Oct 13 21:21:45 2026 -0400 namespace: unhash a dentry before detaching the mounts on it [ Upstream commit 528b383dc35d1e5caf64ddf5d35f983ae543b0d0 ] unlink(), rmdir() and rename() remove the entry from the filesystem, call detach_mounts() on the entry with the inode locked and then call d_delete() once the inode is unlocked. The thing is that between detach_mounts() and d_delete() the dentry is still hashed and positive. But after detach_mounts() nothing covers the dentry anymore. A lookup that finds this dentry in the dcache can uncover what the mounts hid. That's a problem when unlinking files or directories that are mountpoints in other mount namespaces. Everybody who had the underlying entry covered can race the detach_mount() call until d_delete() has run. The race window isn't all that small. It encompasses namespace_unlock() with a full synchronize_rcu_expedited() grace period and the inode_unlock() of the entry. In my experiments three walkers that kept trying read an overmounted file in 11938 of the 16140 unlinks that removed its mountpoint from a bind mount of the filesystem within a minute. Fun fact, d_invalidate() has the same ordering problem but gets it right. It unhashes the dentry first and detaches the mounts afterwards. Let's do the same in __detach_mounts(): - A lookup that hasn't found the dentry yet misses it in the dcache and waits for the directory lock that the caller holds until the name is gone for good. - A lockless lookup that found it already fails the mount_lock check while the dentry still counts as a mountpoint and the d_seq check once it doesn't, and retries. This fixes the lockless path. We still need to fix the reference count lookup in a follow-up patch. So d_drop() the dentry. The dentry stays positive and held but can't be found anymore. Then proceed with the detach and unlink. Reproducer: The reads were counted with the program below, three walkers for 60 s in a VM with 4 CPUs. The race window is stretched with the debug patch pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it found a mountpoint dentry and before its mounts are crossed. fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts() and d_delete(). // SPDX-License-Identifier: GPL-2.0 /* * unlink_covered: unlink a file that is a mountpoint in a detached copy of * its mount, against lookups that open it through that copy. * * A is a tmpfs with the file f1 (content SECRET_F) and the plain file * MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound * on A'/f1, held through an O_PATH fd on its root once the tree fd is * closed. Walkers open f1 through that fd while the driver unlinks A/f1, * where nothing is mounted on it. A walker may read MARK_A or get ENOENT. * A read of SECRET_F is a hit: the name was found after its mount was * gone. The lockless walks use openat2(RESOLVE_CACHED). * * usage: unlink_covered [-t seconds] [-w walkers] */ #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include #include #include #include #include #include #include #include #include #include #include #include #ifndef __NR_open_tree #define __NR_open_tree 428 #endif #ifndef __NR_move_mount #define __NR_move_mount 429 #endif #ifndef __NR_openat2 #define __NR_openat2 437 #endif #ifndef OPEN_TREE_CLONE #define OPEN_TREE_CLONE 1 #endif #ifndef OPEN_TREE_CLOEXEC #define OPEN_TREE_CLOEXEC O_CLOEXEC #endif #ifndef MOVE_MOUNT_F_EMPTY_PATH #define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 #endif #define WORK "/tmp/uc" #define ADIR WORK "/A" static int duration = 60, nwalkers = 3; static atomic_int stop, writer_waiting; static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER; static int cur_fd = -1; /* the root of A', -1 while there is none */ static atomic_long n_unlink, n_walk, n_mark, n_enoent, n_other, n_secret, n_secret_cached; static void die(const char *what) { fprintf(stderr, "FATAL %s: %s\n", what, strerror(errno)); exit(2); } static void put_file(int dfd, const char *name, const char *content) { int fd = openat(dfd, name, O_CREAT | O_WRONLY | O_TRUNC | O_CLOEXEC, 0644); if (fd < 0 || write(fd, content, strlen(content)) < 0) die(name); close(fd); } /* "plain/../" @n times, then f1: a longer walk that checks nothing on its way */ static char *longpath(int n) { char *p = malloc(n * 9 + 3), *q = p; for (int i = 0; i < n; i++, q += 9) memcpy(q, "plain/../", 9); strcpy(q, "f1"); return p; } static void try_read(int dfd, const char *path, int cached) { struct open_how how = { .flags = O_RDONLY | O_CLOEXEC, .resolve = RESOLVE_CACHED }; char buf[32] = ""; long n; int fd; if (cached) fd = syscall(__NR_openat2, dfd, path, &how, sizeof(how)); else fd = openat(dfd, path, O_RDONLY | O_CLOEXEC); atomic_fetch_add(&n_walk, 1); if (fd < 0) { if (errno == ENOENT) atomic_fetch_add(&n_enoent, 1); else if (!cached || errno != EAGAIN) atomic_fetch_add(&n_other, 1); return; } n = read(fd, buf, sizeof(buf) - 1); close(fd); if (n >= 6 && !strncmp(buf, "SECRET", 6)) { if (cached) atomic_fetch_add(&n_secret_cached, 1); if (!atomic_fetch_add(&n_secret, 1)) printf("HIT: read \"%s\" through %s (%s walk)\n", buf, path, cached ? "lockless" : "any"); } else { atomic_fetch_add(&n_mark, 1); } } static void *walker(void *arg) { unsigned int r = (long)arg * 2654435761u; while (!atomic_load(&stop)) { char *p_long, *p_short; int dfd; while (atomic_load(&writer_waiting) && !atomic_load(&stop)) usleep(20); pthread_rwlock_rdlock(&cur_lock); dfd = cur_fd; if (dfd < 0) { pthread_rwlock_unlock(&cur_lock); usleep(100); continue; } r = r * 1103515245u + 12345u; p_long = longpath(1 + (r >> 8) % 400); p_short = longpath(0); try_read(dfd, p_long, 0); try_read(dfd, p_short, 0); try_read(dfd, p_long, 1); pthread_rwlock_unlock(&cur_lock); free(p_long); free(p_short); } return NULL; } /* hand the walkers a new A' (or none), close the old one */ static void publish(int fd) { int old; atomic_fetch_add(&writer_waiting, 1); pthread_rwlock_wrlock(&cur_lock); old = cur_fd; cur_fd = fd; pthread_rwlock_unlock(&cur_lock); atomic_fetch_sub(&writer_waiting, 1); if (old >= 0) close(old); } static void *driver(void *arg __attribute__((unused))) { int a; if (mkdir(ADIR, 0755) && errno != EEXIST) die("mkdir A"); if (mount("A", ADIR, "tmpfs", 0, "size=4M")) die("mount A"); a = open(ADIR, O_PATH | O_DIRECTORY | O_CLOEXEC); if (a < 0 || mkdirat(a, "plain", 0755)) die("A/plain"); put_file(a, "MARK_A", "MARK_A"); while (!atomic_load(&stop)) { int t, m, fd_a; put_file(a, "f1", "SECRET_F"); t = syscall(__NR_open_tree, a, "", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC | AT_EMPTY_PATH); if (t < 0) die("open_tree A"); m = syscall(__NR_open_tree, a, "MARK_A", OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC); if (m < 0) die("open_tree MARK_A"); if (syscall(__NR_move_mount, m, "", t, "f1", MOVE_MOUNT_F_EMPTY_PATH)) die("move_mount"); close(m); fd_a = openat(t, ".", O_PATH | O_DIRECTORY | O_CLOEXEC); if (fd_a < 0) die("open A'"); publish(fd_a); usleep(200 + rand() % 1000); close(t); /* A' is unmounted, fd_a holds it */ usleep(200 + rand() % 1000); if (unlinkat(a, "f1", 0)) /* through A, a plain file there */ die("unlink f1"); atomic_fetch_add(&n_unlink, 1); usleep(rand() % 300); publish(-1); } close(a); umount2(ADIR, MNT_DETACH); return NULL; } int main(int argc, char **argv) { pthread_t d, *w; int c, i; setvbuf(stdout, NULL, _IOLBF, 0); while ((c = getopt(argc, argv, "t:w:")) != -1) { switch (c) { case 't': duration = atoi(optarg); break; case 'w': nwalkers = atoi(optarg); break; default: fprintf(stderr, "usage: unlink_covered [-t seconds] [-w walkers]\n"); return 2; } } if (unshare(CLONE_NEWNS) || mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, NULL)) die("unshare"); if (mkdir(WORK, 0755) && errno != EEXIST) die("mkdir"); w = calloc(nwalkers, sizeof(*w)); for (i = 0; i < nwalkers; i++) if (pthread_create(&w[i], NULL, walker, (void *)(long)i)) die("pthread_create"); if (pthread_create(&d, NULL, driver, NULL)) die("pthread_create"); sleep(duration); atomic_store(&stop, 1); pthread_join(d, NULL); for (i = 0; i < nwalkers; i++) pthread_join(w[i], NULL); printf("unlink_covered: %d s, %d walkers: unlinks %ld walks %ld mark %ld enoent %ld other %ld SECRET %ld (lockless %ld)\n", duration, nwalkers, atomic_load(&n_unlink), atomic_load(&n_walk), atomic_load(&n_mark), atomic_load(&n_enoent), atomic_load(&n_other), atomic_load(&n_secret), atomic_load(&n_secret_cached)); return atomic_load(&n_secret) ? 1 : 0; } # diff --git a/fs/namei.c b/fs/namei.c # --- a/fs/namei.c # +++ b/fs/namei.c # @@ -35,6 +35,7 @@ # #include # #include # #include # +#include # #include # #include # #include # @@ -1205,9 +1206,26 @@ static int sysctl_protected_symlinks __read_mostly; # static int sysctl_protected_hardlinks __read_mostly; # static int sysctl_protected_fifos __read_mostly; # static int sysctl_protected_regular __read_mostly; # +/* debug: widen the two windows of the detach_mounts() race */ # +static int sysctl_detach_race_walk_us __read_mostly; # +static int sysctl_detach_race_unlink_us __read_mostly; # # #ifdef CONFIG_SYSCTL # static const struct ctl_table namei_sysctls[] = { # + { # + .procname = "detach_race_walk_us", # + .data = &sysctl_detach_race_walk_us, # + .maxlen = sizeof(int), # + .mode = 0644, # + .proc_handler = proc_dointvec, # + }, # + { # + .procname = "detach_race_unlink_us", # + .data = &sysctl_detach_race_unlink_us, # + .maxlen = sizeof(int), # + .mode = 0644, # + .proc_handler = proc_dointvec, # + }, # { # .procname = "protected_symlinks", # .data = &sysctl_protected_symlinks, # @@ -1878,6 +1896,10 @@ static struct dentry *lookup_fast(struct nameidata *nd) # dentry = __d_lookup(parent, &nd->last); # if (unlikely(!dentry)) # return NULL; # + /* debug: between finding a mountpoint and crossing its mounts */ # + if (unlikely(sysctl_detach_race_walk_us) && d_mountpoint(dentry)) # + usleep_range(sysctl_detach_race_walk_us, # + sysctl_detach_race_walk_us + 10); # status = d_revalidate(nd->inode, &nd->last, dentry, nd->flags); # } # if (unlikely(status <= 0)) { # @@ -5693,6 +5715,10 @@ int vfs_unlink(struct mnt_idmap *idmap, struct inode *dir, # if (!error) { # dont_mount(dentry); # detach_mounts(dentry); # + /* debug: the mounts are gone, d_delete() is still to come */ # + if (unlikely(sysctl_detach_race_unlink_us)) # + usleep_range(sysctl_detach_race_unlink_us, # + sysctl_detach_race_unlink_us + 10); # } # } # } Fixes: 8ed936b5671b ("vfs: Lazily remove mounts on unlinked files and directories.") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-1-dd44b89d44ce@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: adjusted context for pointer-based mountpoint handling ] Signed-off-by: Sasha Levin commit c2c2bab5eeb227c0c45d971c58a5f66661e7bb8a Author: Krzysztof Karas Date: Tue Oct 13 14:36:58 2026 -0400 drm/i915/gt: Unmask interrupts only when ACTIVE is true [ Upstream commit 5346b1cec6afa4f9b4b49a9f84e3cfef95a3f7bb ] There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/16562 Cc: stable@vger.kernel.org # v5.5+ Assisted-by: GitHub-Copilot:claude-opus-5 Assisted-by: GitHub-Copilot:gpt-6-astra Signed-off-by: Krzysztof Karas Reviewed-by: Andi Shyti Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20260910081329.3300417-1-krzysztof.karas@intel.com (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) Signed-off-by: Jani Nikula [ sashal: adjusted locking context to use >->irq_lock instead of gt->irq_lock ] Signed-off-by: Sasha Levin commit 423c871a586cff8b29f48db00e3c45c21d0e8121 Author: Nguyen Ngoc Thang Date: Tue Oct 13 14:58:33 2026 -0400 drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN [ Upstream commit 755c94d178b7e972bb766199d34e4ba4f63a89eb ] __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged. Reported-by: syzbot+ca23c8570669ead78867@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ca23c8570669ead78867 Fixes: ca91a2758fce ("drm/fb-helper: Support deferred setup") Cc: stable@vger.kernel.org Signed-off-by: Nguyen Ngoc Thang Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260927075434.72658-1-ngocthang2710.1999@gmail.com Link: https://patch.msgid.link/20260917154743.1621-1-shechenglong@xfusion.com [ sashal: adapted the error path to preserve the existing preferred_bpp = bpp_sel assignment. ] Signed-off-by: Sasha Levin commit 7412c6fb671dda9776deebb283daf0bb2f1b48e5 Author: Ahmed Abdelhaleem Ahmed Date: Tue Oct 13 14:52:23 2026 -0400 scsi: ch: Do not keep references to data transfer element devices [ Upstream commit 27c0f718d3b3c99e6d315308e95d987d0382a8a8 ] ch_readconfig() looks up the scsi_device of every data transfer element whose SCSI id the changer reports in READ ELEMENT STATUS, and stores it in ch->dt[]. scsi_device_lookup() takes a reference, and nothing ever drops it: ch_destroy() frees the array with kfree(). ch->dt[] is read nowhere else - it only supplies the vendor, model and revision printed in the same loop. Once such a drive is removed, its scsi_device can never be released. It stays on the host's device list at its address, so a new device there is refused by anything that walks the list - target_core_pscsi reports "scsi_device_get() failed for H:C:T:L" - and the low-level driver's module can no longer be unloaded. Only a reboot recovers. It shows with any changer that reports its drives' ids; with the mhvtl virtual library (IBM 3573-TL personality), each create and remove of a library with four drives leaves four references behind, counted by the module's use count in lsmod. With ch not bound the count is unchanged, and with this patch applied it is unchanged too. Drop the reference as soon as the name has been printed, and remove the now unused dt[] array. That also removes the array leaked when ch_probe() fails after ch_readconfig(). The same leak was reported with an RFC patch in 2022, which was not merged. Fixes: daa6eda65a53 ("[SCSI] add scsi changer driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-scsi/20220719075442.6215-1-yanghao_ht@163.com/ Signed-off-by: Ahmed Abdelhaleem Ahmed Reviewed-by: Laurence Oberman Fixes: daa6eda65a53 ("[SCSI] add scsi changer driver") Link: https://patch.msgid.link/20260929-ch-dt-leak-v2-1-ddda8d635dca@gmail.com Signed-off-by: Martin K. Petersen (Oracle) [ sashal: adapted removal of kzalloc_objs() to the existing kcalloc() allocation ] Signed-off-by: Sasha Levin commit 8de131e1a2ab379641bb475f1bcb472a1a1d75df Author: Shao-Fu Chen Date: Tue Oct 13 11:59:44 2026 -0400 optee: register TEE devices only once fully initialized [ Upstream commit c108feca0a096f8db25d1b69130035025e9e936d ] optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. Fixes: 4fb0a5eb364d ("tee: add OP-TEE driver") Cc: stable@vger.kernel.org Signed-off-by: Shao-Fu Chen [JW: adding fixes and cc] Signed-off-by: Jens Wiklander [ sashal: adapted separate FF-A and SMC probe changes to the unified optee_probe() with optee_remove() cleanup ] Signed-off-by: Sasha Levin commit 13ba3bb059f8fa2c930dc9f670a5706325b7e46c Author: Shawn Lin Date: Tue Oct 13 12:04:56 2026 -0400 pmdomain: rockchip: propagate subdomain add errors [ Upstream commit 4c0d69d677cf5b0065ebbb3ceb8ba66fddbec630 ] rockchip_pm_add_subdomain() ignored the return value of its recursive call, so a failure deeper in the hierarchy was silently dropped and probe still succeeded with an incomplete domain tree. Fixes: 6be05b5ec161 ("soc: rockchip: power-domain: add support for sub-power domains") Signed-off-by: Shawn Lin Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson [ sashal: Adapted to the Rockchip power-domain driver’s older location in the SoC subsystem. ] [ sashal: goto err_out instead of return, so the np reference taken by for_each_child_of_node() is dropped ] Signed-off-by: Sasha Levin commit 4db678e5c1e02904cbdb100f21f7e297d423803d Author: Shawn Lin Date: Tue Oct 13 12:05:02 2026 -0400 pmdomain: rockchip: don't ignore clock lookup errors on attach [ Upstream commit 4c66c423593e26273ea0d644906ed007630c6f6d ] rockchip_pd_attach_dev() treated every of_clk_get() error as the end of the clock list, so a clock that exists but is not available yet (e.g. -EPROBE_DEFER) was silently skipped and the device ended up without pm_clk management. Only -ENOENT means there are no more clocks. Fixes: 7c696693a4f5 ("soc: rockchip: power-domain: Add power domain driver") Signed-off-by: Shawn Lin Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson [ sashal: adjusted the patch to the Rockchip power-domain driver's older source location ] Signed-off-by: Sasha Levin commit eaec37c531df178657484e8a3c22a25ad3c9c4f0 Author: Shawn Lin Date: Tue Oct 13 12:05:08 2026 -0400 pmdomain: rockchip: fix clock leak on domain probe failure [ Upstream commit d8b3847770661b7109146e6479eeadcdab9cecf0 ] When of_clk_get() failed in the middle of the loop, the references of the clocks acquired so far were leaked instead of being released by the error path. Fixes: d909072d0521 ("soc: rockchip: power-domain: use clk_bulk APIs") Signed-off-by: Shawn Lin Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson [ sashal: adjusted for the Rockchip power-domain driver residing in the SoC subsystem. ] Signed-off-by: Sasha Levin commit 2bc5df0cf906f36a8f59ac864139ee2b7b53d3c0 Author: Mikulas Patocka Date: Tue Oct 13 10:58:20 2026 -0400 dm: fix reading free memory in do_resume [ Upstream commit c9417c1c5269e2bd0570fbe53e4ec03a8d31f008 ] When do_resume calls dm_table_get_mode(new_map), the call is done without holding any locks (it only holds a reference to the md). It may be possible that another concurrent ioctl on the same device will swap table after dm_swap_table and before dm_table_get_mode. In this case, dm_table_get_mode(new_map) reads freed memory. This race condition was triggered by syzbot. This commit fixes the race by reading mode of the new table before dm_swap_table. Note that new_map is also passed to dm_ima_need_measure, but this function doesn't attempt to dereference it, so this call should be safe. Note that this is not a security bug because only root can trigger it and the commonly used tools such as lvm or cryptsetup do not call the ioctls concurrently, so that they can't trigger it acceidentally. Signed-off-by: Mikulas Patocka Reported-by: syzbot+bdff1ecf726d2af66afd@syzkaller.appspotmail.com Cc: stable@vger.kernel.org [ sashal: Replaced blk_mode_t/BLK_OPEN_WRITE with fmode_t/FMODE_WRITE to match the existing API. ] Signed-off-by: Sasha Levin commit f3f925e2a57ab256c54b558be7c832ada14bc9c0 Author: Matthew Wilcox (Oracle) Date: Thu Oct 15 11:27:01 2026 +0000 highmem: round down the address passed to kunmap_flush_on_unmap() commit 88d7b12068b95731c280af8ce88e8ee9561f96de upstream. We already round down the address in kunmap_local_indexed() which is the other implementation of __kunmap_local(). The only implementation of kunmap_flush_on_unmap() is PA-RISC which is expecting a page-aligned address. This may be causing PA-RISC to be flushing the wrong addresses currently. Link: https://lkml.kernel.org/r/20230126200727.1680362-1-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) Fixes: 298fa1ad5571 ("highmem: Provide generic variant of kmap_atomic*") Reviewed-by: Ira Weiny Cc: "Fabio M. De Francesco" Cc: Al Viro Cc: Thomas Gleixner Cc: Helge Deller Cc: Alexander Potapenko Cc: Andrey Konovalov Cc: Bagas Sanjaya Cc: David Sterba Cc: Kees Cook Cc: Sebastian Andrzej Siewior Cc: Tony Luck Cc: Signed-off-by: Andrew Morton [ 5.10 has no include/linux/highmem-internal.h and no kmap_local API, so __kunmap_local() does not exist. Therefore, I applied the __kunmap_atomic() hunk to include/linux/highmem.h ] Signed-off-by: Gyokhan Kochmarla Signed-off-by: Sasha Levin commit 43fd2e2ec66e6db26b6ea3e9e7a4c1018455e1b0 Author: Christian Brauner Date: Tue Oct 13 22:44:59 2026 -0400 namespace: check the mounts before reading their parents in pivot_root() [ Upstream commit 6b7c001eb5857fa09041f47673666060a2e5fc1c ] path_pivot_root() reads the parents of new_root and of the caller's root and checks whether they are shared before it checks that either mount is in the caller's mount namespace. Only namespace_sem is held. That's fine for a mount that is in the caller's mount namespace. But new_root can be a file descriptor to a mount that has been unmounted and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted nothing pins the parent for it. The final mntput() of the parent unhooks the children under mount_lock alone and frees the parent afterwards: pivot_root() close(fd), last ref on the parent ------------ --------------------------------- ex_parent = new_mnt->mnt_parent mntput_no_expire_slowpath() __umount_mnt(new_mnt) cleanup_mnt() call_rcu() IS_MNT_SHARED(ex_parent) BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840 Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157 path_pivot_root+0xf1a/0x1840 __x64_sys_pivot_root+0x165/0x190 The same goes for the caller's root via chroot(). Both outcomes of the check end in EINVAL so nothing but the read itself goes wrong. It's the same thing commit bb4609405752 ("statmount: read the parent of an unmounted mount under mount_lock") fixed for statmount(). Check that both mounts are in the caller's namespace before their parents are read. Every path returns EINVAL either way. Fixes: e0c9c0afd2fc ("mnt: Update detach_mounts to leave mounts connected") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260930-work-mount-fixes-3-v1-10-be34c83956ae@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: Adapted the checks to the pivot_root syscall implementation using goto out4 instead of return -EINVAL. ] Signed-off-by: Sasha Levin commit b201d59d047a5e05728c10864a56bdb67950d0b1 Author: Christian Brauner Date: Tue Oct 13 21:21:39 2026 -0400 namespace: don't inherit MNT_UMOUNT in clone_mnt() [ Upstream commit e2c6d326216642011da318b9edfd5d57ebd5a56f ] MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. Fixes: 590ce4bcbfb4 ("mnt: Add MNT_UMOUNT flag") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260926-work-mount-fixes-2-v1-3-f357abf3d17b@kernel.org Signed-off-by: Christian Brauner (Amutable) [ sashal: adapted MNT_UMOUNT filtering to the explicit flag mask in clone_mnt() ] Signed-off-by: Sasha Levin commit 073437615a8da528935146ca6a17292c0ca8ce19 Author: Zack Rusin Date: Tue Oct 13 19:04:33 2026 -0400 drm/vmwgfx: validate pitch coming from userspace [ Upstream commit 21bc51cb89ced74d6645a138cc2f21184bc75094 ] Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping. Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes") Cc: stable@vger.kernel.org Reported-by: Youness HFA Signed-off-by: Zack Rusin Reviewed-by: Maaz Mombasawala Link: https://patch.msgid.link/20260809204515.211045-1-zack.rusin@broadcom.com [ sashal: Adapted cursor calculations to existing hard-coded 64-pixel dimensions and 4-byte pixels. ] [ sashal: Compare against bo->num_pages << PAGE_SHIFT, since bo->base.size is never set for vmwgfx buffer objects on 5.10. ] Signed-off-by: Sasha Levin commit d7a3bf6f55ab77d465206b25fe3418091c3d4b92 Author: Mikhail Gavrilov Date: Tue Oct 13 14:13:15 2026 -0400 Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex [ Upstream commit ac022970e9fb0a5f7e7d1f6c8e104c1ed924dd1c ] An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer. Fixes: 759c185d0bbd ("Bluetooth: RFCOMM: serialize security confirmation handling") Suggested-by: Pauli Virtanen Reported-by: Pauli Virtanen Closes: https://lore.kernel.org/linux-bluetooth/5e76a95e934e451e7006db28827c2d64af5a88be.camel@iki.fi/ Reported-by: syzbot+74071deb72339c215b2e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-bluetooth/6a92fadc.08e933ee.dbf97.008f.GAE@google.com/ Reported-by: Jiaming Zhang Closes: https://lore.kernel.org/all/CANypQFabseTuRiyz2pGkc_Qj0moGDnY7KEp1qdTOqkw6gAL3hw@mail.gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikhail Gavrilov Tested-by: syzbot+74071deb72339c215b2e@syzkaller.appspotmail.com Signed-off-by: Luiz Augusto von Dentz [ sashal: adjusted kernel_connect() context for the existing struct sockaddr cast instead of struct sockaddr_unsized ] Signed-off-by: Sasha Levin commit 13be794844e368b4f8e8d33e97efa23c0a1ebaf8 Author: Weiming Shi Date: Tue Oct 13 12:04:49 2026 -0400 net: team: stop reusing skb after queue override [ Upstream commit b7454f1940c5e6d92e753853c476a769e452f30a ] A nonzero dev_queue_xmit() result does not return ownership of the skb. When an override port's qdisc drops it, the queue override helper used to try another port or the mode transmit op with the freed skb. Return the handoff decision separately from transmit success. Select only the first override port under RCU and stop after handing it the skb, regardless of the lower transmit result. Keep the existing success and drop accounting. BUG: KASAN: slab-use-after-free in sk_skb_reason_drop Write of size 4 by task poc/5040 sk_skb_reason_drop (net/core/skbuff.c:1240) dev_kfree_skb_any_reason (net/core/dev.c:3470) ab_transmit (drivers/net/team/team_mode_activebackup.c:49) team_xmit (drivers/net/team/team_core.c:1849) __dev_direct_xmit (net/core/dev.c:4934) Freed by task 5040: __tcf_kfree_skb_list (net/sched/sch_generic.c:43) __dev_queue_xmit (net/core/dev.c:4831) team_xmit (drivers/net/team/team_core.c:1846) Kernel panic - not syncing: KASAN: panic_on_warn set ... Cc: stable@vger.kernel.org Fixes: 8ff5105a2b9d ("team: add support for queue override by setting queue_id for port") Reported-by: Signed-off-by: Weiming Shi Link: https://patch.msgid.link/20261001182326.572045-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d61bf3bc17de1e18cbdac94cf5389bb9dc2ddfe7 Author: Weiming Shi Date: Tue Oct 13 12:04:48 2026 -0400 net: team: fix NULL pointer dereference in team_xmit during mode change [ Upstream commit 25fe708bbc59289d3d1ea4b126fbc1b460a072a5 ] __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers. synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Jiayuan Chen Link: https://patch.msgid.link/20260521081159.1491563-3-bestswngs@gmail.com Signed-off-by: Paolo Abeni Stable-dep-of: b7454f1940c5 ("net: team: stop reusing skb after queue override") Signed-off-by: Sasha Levin commit a2fb09c70264362a56e33aabc961a90baaea972c Author: Marc Harvey Date: Tue Oct 13 12:04:47 2026 -0400 net: team: Rename port_disabled team mode op to port_tx_disabled [ Upstream commit cfa477df2cc62ba53cb936669886361152b594a7 ] This team mode op is only used by the load balance mode, and it only uses it in the tx path. Reviewed-by: Jiri Pirko Signed-off-by: Marc Harvey Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-3-f47e7589685d@google.com Signed-off-by: Paolo Abeni Stable-dep-of: b7454f1940c5 ("net: team: stop reusing skb after queue override") Signed-off-by: Sasha Levin commit 1e8dc1273a9253c6c997c92ae9cf033f0dac75e8 Author: Marc Harvey Date: Tue Oct 13 12:04:46 2026 -0400 net: team: Remove unused team_mode_op, port_enabled [ Upstream commit 014f249121d73909528df320818fba7693d0ec92 ] This team_mode_op wasn't used by any of the team modes, so remove it. Reviewed-by: Jiri Pirko Signed-off-by: Marc Harvey Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260409-teaming-driver-internal-v7-2-f47e7589685d@google.com Signed-off-by: Paolo Abeni Stable-dep-of: b7454f1940c5 ("net: team: stop reusing skb after queue override") Signed-off-by: Sasha Levin commit 0ed8edcbcf2290dba13c1beeba27fc19ad38515b Author: Zixuan Chai Date: Tue Oct 13 10:39:07 2026 -0400 net: bridge: avoid recursive multicast port cleanup [ Upstream commit 5158353121bae4f552cb677ce8c5c3ef52f93a0d ] br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL port groups by calling br_multicast_del_pg(). For S,G entries, that deletion calls back into br_multicast_sg_del_exclude_ports(), so a large number of STAR_EXCL ports consumes one kernel stack frame per port and can hit the stack guard page. Keep the complete port-group deletion path for cleanup, but suppress the S,G exclude-port cleanup while that helper is already walking the same entry. Normal deletion callers retain the existing behavior. Fixes: 8266a0491e92 ("net: bridge: mcast: handle port group filter modes") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Signed-off-by: Zixuan Chai Signed-off-by: Ren Wei Signed-off-by: David S. Miller [ sashal: Adjusted context for the __br_multicast_del_pg() declaration because neighboring upstream forward declarations are absent. ] Signed-off-by: Sasha Levin commit 1f88a8d285ffc65930494d6baa013df1da618977 Author: Felix Fietkau Date: Wed Feb 14 15:42:35 2024 +0100 netfilter: nf_tables: fix bidirectional offload regression [ Upstream commit 84443741faab9045d53f022a9ac6a6633067a481 ] Commit 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules") made unidirectional flow offload possible, while completely ignoring (and breaking) bidirectional flow offload for nftables. Add the missing flag that was left out as an exercise for the reader :) Cc: Vlad Buslov Fixes: 8f84780b84d6 ("netfilter: flowtable: allow unidirectional rules") Reported-by: Daniel Golle Signed-off-by: Felix Fietkau Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit a56a9c6b13a5323cb8bd67bae921dfb9d28cff31 Author: Lorenzo Stoakes (ARM) Date: Tue Oct 13 18:31:15 2026 +0100 mm/mremap: fix locked_vm leak from MREMAP_DONTUNMAP self-merge [ Upstream commit 838bb60dc21553e32df90f2f3bac5b905376e7aa ] The MREMAP_DONTUNMAP feature is highly unusual in that it permits mremap() operations that keep the original VMA in place. Historically this has led to a lot of bugs where non-obvious interactions occur between existing mremap() operations and the original VMA. Fix another of these - self-merge. Self-merge occurs when a VMA is moved in front of or behind itself and the attributes of the VMA permit such a merge. Practically this can only happen for unfaulted anonymous VMAs due to the page offset equality requirement for merge: |------------| | | | v |...........||-----------||...........| | || unfaulted || | |...........||-----------||...........| ^ | | | |------------| This becomes problematic if the VMA is configured by the user to mlock-on-fault, i.e. the VMA_LOCKED_BIT, VMA_LOCKONFAULT_BIT VMA flags are set. MREMAP_DONTUNMAP clears mlock flags for the source VMA and maintains them for the destination VMA. Self-merge makes this impossible (there is only one VMA) and incorrectly clears the destination VMA's mlock flags. This causes a leak in mm->locked_vm as clearing this flag does not decrement the counter and the VMA no longer has VMA_LOCKED_BIT set so it is not decremented on unmap. Resolve this by simply disallowing a self-merge in this case - the source and destination VMAs are kept distinct and then are able to have distinct mlock() flags. Update to make the now-redundant self-merge check a VM_WARN_ON_ONCE() instead to guard against future regressions. Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Andrew Morton Reviewed-by: Pedro Falcato Acked-by: Kiryl Shutsemau (Meta) Reviewed-by: Jose A. Perez de Azpillaga Tested-by: Anirudh Srinivasan Cc: [ ljs - Converted to work with vma_merge(), tweaked commit msg, removed redundant self-merge code and comment. ] Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Sasha Levin commit 3bebf4e28c00bd4f8d9cdb9623e38ee022080297 Author: Lorenzo Stoakes (ARM) Date: Mon Oct 12 20:58:43 2026 -0400 mm/mremap: fix locked_vm leak by splitting VMA for MREMAP_DONTUNMAP [ Upstream commit 597e4b9ab48a3f841080f627722064853d3f650e ] The MREMAP_DONTUNMAP feature is highly unusual in that it permits mremap() operations that keep the original VMA in place. Historically this has led to a lot of bugs where non-obvious interactions occur between existing mremap() operations and the original VMA. Fix another of these - partial copies. The long-standing mremap() partial VMA logic has the baked-in assumption that the originating VMA is unmapped and thus moved. However MREMAP_DONTUNMAP defeats this by performing a partial copy instead since it keeps the source VMA around. An mremap(..., MREMAP_DONTUNMAP) operation disallows resizing of the VMA, but the operation can be performed partially: |-----------------| | | | v <------> <------> .new_sz. new_sz |--.------.--| |------| | .source. | | dest | |--.------.--| |------| <------------> old_sz The page tables in the specified range are moved, but the original VMA is kept intact. This interacts poorly with mlock()'d VMAs, as the VMA_LOCKED_BIT flag is cleared for the entire source VMA and set for the entire destination VMA. This results in an mm->locked_vm leak as the change is therefore not accounted correctly. The clear solution here is to make the portion of the source VMA which is mremap()'d distinct from the rest of it, a.k.a. split it. Therefore resolve this issue by splitting it ahead of the rest of the mremap() operation if the VMA is mlock()'d. This is valid, as the source VMA will lose its VMA_LOCKED_BIT flag, so if a partial remap it will become distinct from the rest of the VMA. In order to make this change re-expose split_vma() in vma.h for CONFIG_MMU (nommu doesn't compile mremap.c and uses a static helper instead). Finally, update the sys_map_count check to account for this case. Note that the early check does not use needs_pre_split() - this is because the VMA has not been looked up by this point, so be conservative and assume that the VMA is mlock()'d in this case for the purposes of the sys_map_count check. Link: https://lore.kernel.org/20260930-fix-dontunmap-partial-self-merge-v2-2-f388985a0f0a@kernel.org Fixes: e346b3813067 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()") Signed-off-by: Lorenzo Stoakes (ARM) Signed-off-by: Andrew Morton Reviewed-by: Pedro Falcato Acked-by: Kiryl Shutsemau (Meta) Reviewed-by: Jose A. Perez de Azpillaga Tested-by: Anirudh Srinivasan Cc: Liam R. Howlett Cc: Vlastimil Babka Cc: Jann Horn Cc: Brian Geffon Cc: Minchan Kim Cc: [ sashal: Replaced upstream VMA preparation helpers with inline logic in move_vma() using the existing split_vma(mm, ...) API. ] Signed-off-by: Sasha Levin commit 30ff16d8db6c0951f735c7487347a8c5b37076d3 Author: Vishal Badole Date: Mon Oct 12 17:34:25 2026 -0400 EDAC/amd64: Mask UMC chip select to the four implemented selects [ Upstream commit 7484bc43ba6b8e189b482db5b75e7842890a82b1 ] For DRAM ECC errors, the chip select value can be found in the MCA_SYND[ErrorInformation] field. ErrorInformation[2:0] was first documented in Zen1. The 3 bit field implied that up to 8 chip selects may be used. However, all Zen-based systems have only ever had up to 4 chip selects. So only bits [1:0] would contain a valid chip select value. Future systems are redefining the field to ErrorInformation[1:0]. This matches the existing 'up to 4 chip selects' implementations. And it frees up the extra bit for other decoding. Change the current chip select mask from 0x7 to 0x3 to prepare for the decode change. Fixes: 713ad54675fd ("EDAC, amd64: Define and register UMC error decode function") Suggested-by: Yazen Ghannam Signed-off-by: Vishal Badole Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Yazen Ghannam Cc: Link: https://patch.msgid.link/20261002113204.3358815-2-Vishal.Badole@amd.com [ sashal: adapted the change from umc_get_err_info() to the inline assignment in decode_umc_error() ] Signed-off-by: Sasha Levin commit 33ad492477358b0081ca2c6bd2a0b662e6484835 Author: Christian Göttsche Date: Mon Oct 12 11:39:02 2026 -0400 selinux: fix data race on AVC latest_notif [ Upstream commit 1ca924044bf0de879a1648be93a56939652267d3 ] avc_policy_seqno() reads latest_notif without holding notif_lock, while avc_latest_notif_update() can update it under that lock. KCSAN reports these concurrent accesses during policy boolean updates and permission checks. Use READ_ONCE() for the lockless read and WRITE_ONCE() for the update. The spinlock continues to serialize the comparison and update against other writers. Reads made while holding notif_lock cannot race with a writer and can remain plain accesses. This marks both sides of the intentional concurrent access and constrains compiler transformations, without suppressing checking with data_race(). Cc: stable@vger.kernel.org Fixes: 788e7dd4c22e ("SELinux: Improve read/write performance") Reported-by: syzbot+a7f7cb0737bd91aa698c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a7f7cb0737bd91aa698c Signed-off-by: Christian Göttsche Acked-by: Stephen Smalley Signed-off-by: Paul Moore [ sashal: Adapted global selinux_avc accesses to avc and state->avc pointer accesses. ] Signed-off-by: Sasha Levin commit 75e917473e20dea61f837f9afb5fc3435c9200d2 Author: Michele Dionisio Date: Mon Oct 12 17:34:51 2026 -0400 wifi: brcmfmac: fix P2P device removal race in brcmf_detach() [ Upstream commit 08a3f02fea636e97a7422d1512f76dacdb5b0887 ] When the driver is removed while the user space process that created the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device interface is removed twice and the kernel crashes. The two paths are: - wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P device. nl80211_del_interface() holds RTNL and the wiphy mutex and calls brcmf_p2p_del_vif(), which disables discovery and waits up to 1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(), which unregisters the wdev and frees the vif and the ifp. - brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives, and calls brcmf_remove_interface(ifp, false) for the same ifp. brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls cfg80211_unregister_wdev() on the wdev that was already unregistered and freed. The second list_del_rcu() of wdev->list faults on LIST_POISON2: brcmfmac: brcmf_p2p_del_vif delete P2P vif brcmfmac: brcmf_p2p_deinit_discovery enter brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared brcmfmac: brcmf_detach Enter brcmfmac: brcmf_bus_change_state 1 -> 0 brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed [1.5 s later, brcmf_p2p_del_vif() timed out] brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0 brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed Unable to handle kernel paging request at virtual address dead000000000122 Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] Call trace: _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211] cfg80211_unregister_wdev+0x10/0x1c [cfg80211] brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac] brcmf_remove_interface+0x1f4/0x254 [brcmfmac] brcmf_detach+0x88/0x180 [brcmfmac] brcmf_sdio_remove+0x90/0x7b0 [brcmfmac] brcmf_sdiod_remove+0x20/0xa0 [brcmfmac] brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac] sdio_bus_remove+0x38/0x144 device_release_driver_internal+0x1e8/0x2c0 device_release_driver+0x14/0x20 brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac] brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac] __exit_compat+0x18/0x418 [brcmfmac_cyw] __arm64_sys_delete_module+0x1ac/0x244 The log was taken with debug=0x406 on an i.MX 8M Plus board with a CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same in mainline. To reproduce: 1. Start wpa_supplicant on wlan0 and let it associate. It creates the P2P device (iw dev shows "type P2P-device"). 2. Stop wpa_supplicant and remove the driver without waiting for wpa_supplicant to exit: kill $(pidof wpa_supplicant) rmmod brcmfmac_cyw brcmfmac The crash is reproducible on that board. For the interface without a netdev (the P2P device), take RTNL and the wiphy mutex in brcmf_detach() before reading iflist, and remove it with locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev any more. The interfaces with a netdev are removed as before, because brcmf_del_if() takes RTNL on its own for the primary interface. Fixes: 9831bcb987df ("brcmfmac: Deleting of p2p device is leaking memory.") Cc: stable@vger.kernel.org Assisted-by: claude-opus-5-5 Signed-off-by: Michele Dionisio Acked-by: Arend van Spriel Link: https://patch.msgid.link/20260924123027.4122909-2-michele.dionisio@gmail.com Signed-off-by: Johannes Berg [ sashal: Removed unavailable wiphy_lock() and wiphy_unlock() calls to rely solely on RTNL locking. ] Signed-off-by: Sasha Levin commit 85e6df6e9cd489de8e238596a68b89eee0c03b88 Author: Donggeun Yoo Date: Wed Oct 14 07:58:23 2026 +0000 tracing: Set the trace clock before registering the histogram trigger [ Upstream commit 6ede78d0563a2a3ae3e46f9c07cedb5d79645429 ] hist_register_trigger() puts the trigger on the global named_triggers list in cmd_ops->init(), and only then sets the trace clock: if (data->cmd_ops->init) { ret = data->cmd_ops->init(data); if (ret < 0) goto out; } if (hist_data->enable_timestamps) { ret = tracing_set_clock(file->tr, hist_data->attrs->clock); if (ret) { hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock)); goto out; } The clock string is not checked anywhere before that call, so a named trigger using common_timestamp with an unknown clock fails after it has already become findable. event_hist_trigger_parse() then frees it without taking it off the list, and the next lookup by name reads the freed object: ~# cd /sys/kernel/tracing/events/sched/sched_switch ~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=foo:keys=common_pid' > trigger BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff88800915d760 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0x900 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 63: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Set the clock before the trigger is registered, so that nothing which can fail runs after it is published, the way commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") moved the registration below the rest of the setup. tracing_set_filter_buffering() is reference counted, so the init failure path has to drop the reference that the clock block now takes first. Cc: stable@vger.kernel.org Fixes: a4072fe85ba3 ("tracing: Add a clock attribute for hist triggers") Link: https://patch.msgid.link/20260907091415.554535-1-donggeunyoo.kernel@gmail.com Signed-off-by: Donggeun Yoo Signed-off-by: Steven Rostedt [Lee: Call data->ops->init(data->ops, data) and tracing_set_time_stamp_abs() as b052d70f7c9c ("tracing: Merge struct event_trigger_ops into struct event_command"), 476705419518 ("tracing: Remove redundant trigger_ops params") and b94bc80df648 ("tracing: Use a no_filter_buffering_ref to stop using the filter buffer") are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 8ca61c17d84e1f047557dcf9326be080dcd7fdcd Author: Vicki Pfau Date: Tue Oct 13 09:12:13 2026 +0000 HID: steam: Clean up locking [ Upstream commit de1d341b9b3ec9655f31fb8b44f784cca5e670ad ] This cleans up several issues with locking behavior, including RCU accesses not being guarded behind a lock. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina [Lee: Use explicit lock/unlock calls instead of guard(), adapt to steam->mutex, and omit Steam Deck sensors, mode_switch, rumble_work, coalesce_rumble_work and Ibex changes as 691ead124a0c, e133dc99fc07, a0fbd9437d7d, 1d4549fd1115, fcfa7db89f7a and 0a80b4e8ec6a are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 6e44418d3a06f023877959cc6dd7386ec7f64d59 Author: Vicki Pfau Date: Tue Oct 13 09:12:12 2026 +0000 HID: steam: Refactor registration [ Upstream commit 6f9b740c31ba7e061b2ebb330d9a3d63f1358f29 ] This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina [Lee: Omit sensors, steam_get_attributes(), rumble_work, coalesce_rumble_work and mode_switch changes as e133dc99fc07, a0fbd9437d7d and 1d4549fd1115 are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit af1b56182e54b505b216550587703c861e12368c Author: Vicki Pfau Date: Tue Oct 13 09:12:11 2026 +0000 HID: steam: Rearrange teardown sequence [ Upstream commit ddce9641ce924ed91ec8304577e463823a29ffaf ] This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina [Lee: Omit rumble_work, coalesce_rumble_work and mode_switch cancellation as e133dc99fc07 and 1d4549fd1115 are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 92cd6a76991d22487e507d72d1b2becda870ede4 Author: Vicki Pfau Date: Tue Oct 13 09:12:10 2026 +0000 HID: steam: Fully unregister controller when hidraw is opened [ Upstream commit cd33a91d37eb4d7c6ce56aa7f4688066309808eb ] To avoid conflicts between anything touching the hidraw and the driver we had previously detached the evdev nodes when the hidraw is opened. However, this isn't sufficient to avoid FEATURE reports from conflicting, so we change to fully unregistering the controller internally, leaving only the hidraw active until it's closed. This also unifies the unregister and connect callbacks, as now the logic between these two callbacks is identical. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina [Lee: Convert steam_client_ll_open() and steam_client_ll_close() to schedule work_connect directly and omit sensors, rumble_work, mode_switch and unregister_work changes as e133dc99fc07, e1147961b214 and 1d4549fd1115 are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 7fe9bea580c956663ec695325f1a6d2acd42e69e Author: Vicki Pfau Date: Tue Oct 13 09:12:09 2026 +0000 HID: hid-steam: Make client_opened a counter [ Upstream commit 555b818adb97eca70210a49ba3f1d27882dde092 ] The client_opened variable was used to track if the hidraw was opened by any clients to silence keyboard/mouse events while opened. However, there was no counting of how many clients were opened, so opening two at the same time and then closing one would fool the driver into thinking it had no remaining opened clients. Signed-off-by: Vicki Pfau Signed-off-by: Jiri Kosina [Lee: Adapt steam_client_ll_open() and steam_client_ll_close() as 691ead124a0c and e1147961b214 are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 46519417f5ba86d2945b73162012c8ea1ffa890a Author: Dan Carpenter Date: Tue Oct 13 09:12:08 2026 +0000 HID: hid-steam: Fix cleanup in probe() [ Upstream commit a9f1da09c69f13ef471db8b22107a28042d230ca ] There are a number of issues in this code. First of all if steam_create_client_hid() fails then it leads to an error pointer dereference when we call hid_destroy_device(steam->client_hdev). Also there are a number of leaks. hid_hw_stop() is not called if hid_hw_open() fails for example. And it doesn't call steam_unregister() or hid_hw_close(). Fixes: 691ead124a0c ("HID: hid-steam: Clean up locking") Signed-off-by: Dan Carpenter Reviewed-by: Vicki Pfau Link: https://lore.kernel.org/r/1fd87904-dabf-4879-bb89-72d13ebfc91e@moroto.mountain Signed-off-by: Benjamin Tissoires [Lee: Move client_hdev creation after steam_register() and omit mode_switch and rumble_work cancellation as 691ead124a0c and e133dc99fc07 are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 53dfe9f5da36de02bcd575d93738384a1931618f Author: Adrian Betschart Date: Mon Oct 12 18:05:29 2026 +0200 drm/amd/display: Don't replace a sink mode that shares the native totals commit 54c998c55fc9cbc391b350d67b86e0c2a0748f1a upstream. decide_crtc_timing_for_drm_display_mode() copies the native mode's CRTC timing into the requested mode when clock, htotal and vtotal match. That is meant for the modes amdgpu inserts itself: amdgpu_dm_create_common_mode() duplicates the native mode and changes only hdisplay and vdisplay, so those are sent with the native timing and scaled. A sink can also offer a real mode with the same clock and totals as its native mode. CTA-861 VIC 102 (4096x2160@60) and VIC 97 (3840x2160@60) both use 594 MHz and 4400x2250. With 3840x2160@60 as the preferred mode, a 4096x2160@60 request goes out with the 3840x2160 timing and the framebuffer scaled into it (dst 3840x2025 at y=67), while the AVI InfoFrame still carries VIC 102. A JVC projector then reports 3840x2160 and shows a corrupted right edge. 4096x2160@24, whose totals differ, is sent and displayed correctly. Inserted modes keep the native sync positions; a real mode with its own active width does not. Compare those too, so only inserted modes are patched. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Adrian Betschart Assisted-by: Claude-Code:claude-opus-5-5 Tested-by: Dan Wheeler Reviewed-by: Roman Li Signed-off-by: Alex Deucher (cherry picked from commit 22f9a2da101c37f821cd00954f81dc598754f4d5) Cc: stable@vger.kernel.org (cherry picked from commit 54c998c55fc9cbc391b350d67b86e0c2a0748f1a) [ Adrian: this tree keeps the function in amdgpu_dm.c, with the equal-totals case as its own else-if; added the sync checks there. Dropped the KUnit test, its file does not exist here. ] Signed-off-by: Adrian Betschart Assisted-by: Claude-Code:claude-opus-5-5 Signed-off-by: Sasha Levin commit e98f88d1681327240b58e27f4a38f8e49e241e7b Author: Oliver Hartkopp Date: Tue Oct 13 09:41:12 2026 +0200 can: fix unique skb identifier regression under RPS commit 7093c3b8314a4ef7405c4066a2521398c455efe7 upstream. Commit d4fb6514ff8e ("can: use skb hash instead of private variable in headroom") moved the per-skb unique identifier used for raw_rcv() duplicate detection into skb->hash. With RPS enabled, get_rps_cpu() calls skb_get_hash() before the frame reaches the CAN subsystem. Since CAN skbs have no L3/L4 headers, the flow dissector assigns every CAN frame the same non-zero software hash. can_set_skb_uid() only generated a new identifier when skb->hash was 0, so it kept this constant hash. When the SLAB allocator later reused the same skb address, raw_rcv() mistook the next legitimate frame for a duplicate and dropped it. Fix this by storing the CAN UID in the CAN skb extension (struct can_skb_ext::can_skb_uid) instead of skb->hash, decoupling it from any hash the network stack may compute. can_set_skb_uid() keeps its "assign only if unset" behaviour, which preserves UIDs set before transmission (e.g. by isotp to identify echo frames) across the local loopback path. Frames whose extension is shared with another clone (e.g. via tc mirred or netem duplicate) are given a private extension copy before the UID is assigned, so that independently received skb clones from real CAN interfaces (skbcnt = 0) don't end up with the same UID. The limitation that tc mirred/netem skb duplicates might be dropped in raw_rcv for looped back isotp echo frame skbs is accepted. There is no valid use-case for tc mirred or netem together with isotp which is not capable to operate on different CAN interfaces simultaneously. For routing and modifying CAN frames together with isotp use can-gw. can-gw and vxcan additionally clear the UID of forwarded/duplicated frames so each newly routed frame gets its own unique identifier. [ backport to 5.10: no CAN skb extensions available, so the UID is kept in struct can_skb_priv::skbcnt in the headroom (effectively reverting d4fb6514ff8e) and isotp is adapted accordingly. As skb clones share the headroom, the private extension copy for tc mirred/netem duplicates is not applicable. The UID resets in can-gw and vxcan are omitted, as writing to the shared headroom of cloned skbs would also alter the UID of the original skb. This keeps the pre-d4fb6514ff8e behaviour for routed and vxcan forwarded frames. ] Fixes: d4fb6514ff8e ("can: use skb hash instead of private variable in headroom") Reported-by: Joerg Willmann Closes: https://lore.kernel.org/linux-can/2859AD3D-C805-41A0-9036-C5E8EE152419@clnt.de/ Signed-off-by: Oliver Hartkopp Signed-off-by: Sasha Levin commit 1efa6842e94aa70237446b31fbe2bc16586809c3 Author: Fernando Fernandez Mancera Date: Thu Oct 8 12:41:35 2026 +0200 net: openvswitch: validate transport header presence in set_ipv6_addr [ Upstream commit 3c6a4b11330fe424557538a98fca9f0a4c5bf313 ] When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635 [...] RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline] RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline] RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399 [...] Call Trace: set_ipv6 net/openvswitch/actions.c:531 [inline] do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366 ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592 ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705 genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114 genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218 netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800 Reported-by: syzbot+4cc63fcfb3845e149969@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4cc63fcfb3845e149969 Fixes: 3fdbd1ce11e5 ("openvswitch: add ipv6 'set' action") Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ilya Maximets Link: https://patch.msgid.link/20261008104135.4722-1-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5078a923965f8e7b8ca7edb250521bc17068a3ba Author: Li RongQing Date: Tue Oct 6 13:58:20 2026 +0300 net/mlx5e: Order ICOSQ cc update after CQ doorbell [ Upstream commit b056ca4d3742d0769f91137bb1ce3215428398f7 ] mlx5e_poll_ico_cq() requires sq->cc to be updated only after mlx5_cqwq_update_db_record(), otherwise a CQ overrun may occur. The current implementation updates sq->cc before the CQ doorbell record, violating this ordering requirement. Update the CQ doorbell record first and use dma_wmb() before updating sq->cc. This ensures that the CQ space is released to the device before the corresponding ICOSQ consumer index is updated by software. Fixes: fd9b4be8002c ("net/mlx5e: RX, Support multiple outstanding UMR posts") Signed-off-by: Li RongQing Reviewed-by: Dragos Tatulea Signed-off-by: Tariq Toukan Reviewed-by: Daniel Machon Link: https://patch.msgid.link/20261006105820.257208-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 46d21495f633e38d40857401504ee51c56ffed2a Author: Eric Dumazet Date: Wed Oct 7 06:56:15 2026 +0200 flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() [ Upstream commit f202578efc738b883cfa04889eb97328914265a7 ] bpf_flow_dissect() sanitizes the offsets returned by the BPF program with clamp_t(u16, ..., hlen). If hlen is bigger than 65535, the upper bound is truncated before the comparison. For instance, with hlen == 65536, both nhoff and thoff are forced to zero, even if the program returned sane values. This is the same class of bug as the one fixed in commit 99bda1ecbd56 ("flow_dissector: avoid u16 truncation of skb->len when computing thoff"). That fix does not cover the BPF path, because __skb_flow_dissect() returns early when a BPF flow dissector handles the packet. struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen to U16_MAX before clamping. Found by sashiko while reviewing the commit above. Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20261007045616.445596-1-edumazet@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3f6000fdf8a57b9786669869af8a3e050b541bf3 Author: Eric Dumazet Date: Thu Oct 1 19:11:38 2026 +0000 flow_dissector: avoid u16 truncation of skb->len when computing thoff [ Upstream commit 99bda1ecbd56905f8bd934b9cdccd3bd251192b1 ] __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO frame carrying a 65522..65535 byte L3 packet will be dissected with skb->len in [65536, 65549]. Compare as u32 instead. If the resulting offset cannot be represented in the u16 key_control->thoff, cap it to U16_MAX and report the dissection as failed rather than silently returning a wrong transport offset. thoff is still set on failure, as some callers (such as eth_get_headlen()) use it regardless of the return value. Fixes: d0c081b49137 ("flow_dissector: properly cap thoff field") Signed-off-by: Eric Dumazet Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20261001191140.2818991-2-edumazet@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 09cda41564966c7f9d2a5fa7022af18b5d4161be Author: Marek Szyprowski Date: Fri Oct 2 11:21:12 2026 +0200 ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM [ Upstream commit 7529254014764ae0b8c33d5c61a58f36c65b1a1c ] The probe function puts the device into the runtime PM active state with only the "iis" bus clock enabled, but it also sets priv->op_clk to the parent of the RCLK_SRC mux without enabling it. The runtime PM suspend callback disables both clocks, so the first runtime suspend after probe disables op_clk once more than it was enabled. On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate, so this triggers the following warning during boot: WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45 i2s_bus already disabled ... Workqueue: pm pm_runtime_work Call trace: ... clk_core_disable from clk_disable+0x28/0x34 clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s] i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298 genpd_runtime_suspend from __rpm_callback+0x48/0x18c __rpm_callback from rpm_callback+0x4c/0x50 rpm_callback from rpm_suspend+0xf4/0x718 rpm_suspend from pm_runtime_work+0x9c/0xa0 ... Fix this by enabling op_clk in probe right after getting it, so the clock state matches the runtime PM active state, and by disabling it in remove. Fixes: 48279c53fd1d ("ASoC: samsung: i2s: Prevent external abort on exynos5433 I2S1 access") Assisted-by: Claude Opus 5.5 Signed-off-by: Marek Szyprowski Link: https://patch.msgid.link/20261002092116.585466-1-m.szyprowski@samsung.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit eb72e2eeff559eb1eb07b1d644ce2bc1a16c4a80 Author: Sang-Hoon Choi Date: Wed Sep 30 16:08:58 2026 +0900 nvmet: use the local P2P device on metadata allocation failure [ Upstream commit 4aa9c0f377a4de5e8fddce76b34ee4529639a1ff ] nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data and metadata SGL allocations succeed. If the data allocation succeeds but the metadata allocation fails, out_free_sg passes req->p2p_dev to pci_p2pmem_free_sgl() before that assignment has taken place. Pass the local p2p_dev argument instead, so cleanup uses the same PCI device as the successful data allocation. Fixes: bcd9a0797d73 ("nvmet: fix freeing unallocated p2pmem") Reported-by: Changyul Lee Reviewed-by: Maurizio Lombardi Signed-off-by: Sang-Hoon Choi Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit 2c49ea1dd16d6dc0dd895e6aec57c9a448191cfe Author: Sang-Hoon Choi Date: Wed Sep 30 02:37:34 2026 +0900 cxgb4/ch_ktls: disable softirqs around tid_list erases [ Upstream commit 4c9dc0faca98084922caeb689579d338cf3e1c29 ] chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path using xa_insert_bh(). The array is shared by the adapter's connections and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray lock without disabling softirqs. When cleanup runs with softirqs enabled, a receive softirq for another connection on the same CPU can interrupt the erase and spin on the lock held by the interrupted task. Use xa_erase_bh() at both sites to match the insertion path. Fixes: 65e302a9bd57 ("cxgb4/ch_ktls: Clear resources when pf4 device is removed") Reported-by: Changyul Lee Assisted-by: LLM Signed-off-by: Sang-Hoon Choi Reviewed-by: Ayush Sawal Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 64153f1dd14dabfd4e79bf506bb5b5d66f7b42eb Author: Jamal Hadi Salim Date: Wed Sep 30 03:31:02 2026 -0400 net/sched: em_text: reject unterminated algo before autoload [ Upstream commit c9728fcf2e7fb4a7a8d08ebd9524c3b02ae1a021 ] This is a follow-up to commit 9c572a83037a ("net/sched: fix potential stack infoleak in em_text_dump()"), which zero-initialised the dump-side struct. Sashiko pointed at a pre-existing bug that exposed the change-side input-validation gap open. em_text_change() casts the raw netlink attribute payload to struct tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf() walks %s until it finds a NUL, so an algo[] with no NUL reads past the array into the adjacent struct fields and payload and feeds those bytes to the usermode helper command line. This is an out-of-bounds read and a kernel memory disclosure. Reject the attribute when no NUL exists within TC_EM_TEXT_ALGOSIZ bytes, matching the check xt_string has had since 3ab720881b6e. Conditions to recreate the bug: - CAP_NET_ADMIN on the target netns (namespace-local via unshare -Urn is enough) - install clsact on an interface, then add a basic filter with one text ematch whose algo[] is 16 bytes with no NUL (e.g. "A"*16) and pattern_len at least 1 - the add fails with -ENOENT and the kernel invokes modprobe with a module name made of "ts_" plus the 16 bytes and the adjacent payload Fixes: d675c989ed2d4 ("[PKT_SCHED]: Packet classification based on textsearch (ematch)") Reported-by: Sashiko (gemini) Closes: https://sashiko.dev/#/patchset/20260918133953.12494-1-bernard.ladenthin%40gmail.com Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/QDISC-2DIU.v1.20260929183844@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 75f89ab8cb4c9f136af790cc5df1f88d2726953a Author: Maíra Canal Date: Wed Sep 30 16:06:50 2026 -0300 drm/vc4: Free the BO cache size list on teardown [ Upstream commit b41ff8b529278216cba22a5dcdc93fea2a3a9619 ] vc4_bo_cache_destroy() purges the cached BOs but never frees the size list, leaking it on every unbind. Fixes: c826a6e10644 ("drm/vc4: Add a BO cache.") Assisted-by: LLM Reviewed-by: Thadeu Lima de Souza Cascardo Link: https://patch.msgid.link/20260930190721.1897264-1-mcanal@igalia.com Signed-off-by: Maíra Canal Signed-off-by: Sasha Levin commit f7e5e0a8cd4e7666ecad6e64165d139469fe6249 Author: Myeonghun Pak Date: Sun Sep 13 18:30:19 2026 -0400 drm/aspeed: Balance the display clock enable on teardown [ Upstream commit ecce445c6489895463b7ddec2af66338287fee4c ] aspeed_gfx_load() enables the display clock without checking the return value and never disables it on probe failure or removal. devm_clk_get() only releases the clock reference, leaving the enable unbalanced. Use devm_clk_get_enabled() to handle enable failures and automatically disable and unprepare the clock on probe failure or removal. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: 4f2a8f5898ec ("drm: Add ASPEED GFX driver") Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Assisted-by: OpenAI:GPT-5.6 Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260913223019.89651-1-mhun512@gmail.com Link: https://patch.msgid.link/20260905080426.34224-1-kmehltretter@gmail.com Signed-off-by: Sasha Levin commit 3ae0577d3be9f1e2707cce4749da250054e25e3f Author: Alexandru Hossu Date: Fri May 22 02:45:29 2026 +0200 staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop commit f9654207e92283e0acac5d64fe5f8835383b5a23 upstream. The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Reviewed-by: Luka Gejak Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com [ mdmitrichenko: adapt to 5.10: struct ndis_80211_var_ie still has the CamelCase Length field and a one-element data[1] array here, so sizeof(*pIE) is 3 rather than the 2-byte IE header. Use the explicit header size 2, as the existing i += (pIE->Length + 2) does, so that a valid IE ending exactly at pkt_len is not dropped. ] Signed-off-by: Mikhail Dmitrichenko Signed-off-by: Greg Kroah-Hartman commit d8c7f74adf5de78035d41aa33c8f71e12b3ca430 Author: Christian Brauner Date: Fri Oct 2 15:52:36 2026 +0200 namespace: refuse an automount below a mount that is in no namespace commit ba985ce08471c555af2a2fbe217c1bc2e72a6d8c upstream. It's possible to add autmounts even when the parent mount isn't in the mount namespace of the caller. The only requirement we have is that the parent mount namespace must not be NULL, i.e., unmounted. Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes that trivially true. So that passes the test and attach_recursive_mnt() accepts that as a mount point and funny enough, count_mounts() dereferences MNT_NS_INTERNAL. The problem is it is an error pointer... So we can reach this in userspace via fanotify. A filesystem mark on the lower filesystem of an overlay reports paths on the layer clone and reading the event hands out a descriptor on it. For example with debugfs as the lower layer it goes kaboom: openat(evfd, "tracing", O_DIRECTORY) Oops: general protection fault KASAN: null-ptr-deref in range [0x1d0-0x1d7] RIP: 0010:count_mounts+0x35/0x200 attach_recursive_mnt finish_automount And since that sleeping beauty happens under namespace_sem held for writing every mount operation on the system blocks from then on. Congrats. Use is_mounted() instead which rejects unmounted and internal mounts alike. The open fails with EINVAL just as it did before clone_private_mount() used MNT_NS_INTERNAL. Fixes: df820f8de4e4 ("ovl: make private mounts longterm") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20261002-work-mount-fixes-4-v1-5-dd44b89d44ce@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 25e3ce3e2ebdd8ed3fc19dc1f7e3bc487f9240f3 Author: Christian Brauner Date: Wed Sep 30 15:32:07 2026 +0200 dcache: don't put a mountpoint on a dentry that's being removed commit 75f4197f1e11d2eb75c2d6f916a7d4764db621e5 upstream. rmdir(), unlink() and rename() call dont_mount() on the victim and then detach_mounts() with the victim's inode locked. do_lock_mount() takes the inode lock of the mountpoint and checks cant_mount() so a mount can't show up after detach_mounts(). But attach_recursive_mnt() makes a second mountpoint for the root of the source mount so that the mounts already located at the destination can be put on top of it. No inode is locked for that one and d_set_mounted() only refuses a dentry that is unlinked. Between detach_mounts() and d_delete() the victim is still hashed: rmrace: b passed dont_mount() and detach_mounts(), sleeping T2: move_mount(S, /tmp/plcant/x, BENEATH) = 0 errno 0 () T1: rmdir(/tmp/plcant/d/b) = 0 errno 0 109 107 0:61 /d/b//deleted /tmp/plcant/x rw,relatime - tmpfs tmpfs rw 108 109 0:63 / /tmp/plcant/x rw,relatime - tmpfs T rw A bind mount of the directory that's being removed is moved beneath an existing mount while the rmdir() is located between the two calls. The mount ends up on the removed directory and nothing will ever detach it. Check cant_mount() in d_set_mounted() as well. dont_mount() raises the flag under d_lock before detach_mounts() runs so either the mountpoint is set first and detach_mounts() finds the mount or the flag is seen and the mount is refused. Fixes: 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260930-work-mount-fixes-3-v1-15-be34c83956ae@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit cda0c4e502a0f74a191471ce100fb061e5ab35d6 Author: Christian Brauner Date: Wed Sep 30 15:31:54 2026 +0200 namespace: check a submount for references right before unmounting it commit 32bf92416614a1e3ff3524fc6b780259c7aad3ef upstream. shrink_submounts() and mark_mounts_for_expiry() first collect all the mounts they are allowed to unmount and then unmount them. Whether a mount is busy is decided by propagate_mount_busy() on the tree. But unmounting the first mount changes the tree that the second one propagates into. propagate_umount() moves a surviving overmount off a copy it unmounts and mounts it where the copy was mounted. If that's where the propagated copy of the second victim is looked up the overmount becomes a candidate of the second umount_tree(). It's childless and so trim_one() commits it without looking at its reference count. So a synchronous umount pulls out a busy mount that is in use somewhere else and marks it MNT_SYNC_UMOUNT while it has users: umount2(/tmp/plshrink/p1, 0) = 0 errno 0 cwd is (unreachable) The same two umounts requested one after the other fail with EBUSY. This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts inherit the flag. Check each mount right before it is unmounted under the same hold of namespace_sem and mount_lock as the umount itself. Make sure that the algorithm stays linear. Fixes: 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260930-work-mount-fixes-3-v1-2-be34c83956ae@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 66472227ff8969d581ff506295aaad04f714da39 Author: Christian Brauner Date: Sat Sep 26 15:44:29 2026 +0200 fs: refuse fspick() on internal superblocks commit 02587a4af82adccaef8e3b3624b4e7f1c401632d upstream. There's a few instances where a internal superblock is reachable by fspick(). Block that. graft_tree() and fsmount() already refuse them. fanotify refuses mount and superblock marks on them for the same reason. Fixes: cf3cba4a429b ("vfs: syscall: Add fspick() to select a superblock for reconfiguration") Cc: stable@vger.kernel.org # v5.2+ Link: https://patch.msgid.link/20260926-work-mount-fixes-2-v1-6-f357abf3d17b@kernel.org Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Greg Kroah-Hartman commit 0c8b08b1958ecdb404401c345fe07fd49e30a286 Author: Alex Deucher Date: Fri Sep 25 09:16:26 2026 -0400 drm/amdgpu: make Mac FB workaround generic commit c7f44ec5c4ec760e74351f1843dcb8322f67cbf6 upstream. Rather than adding a case of every chip where this is seen just check if the FB is at 0 and the ssid is apple. This should cover all chips which fall into this case. Tested-by: Ayhan Çiçek Signed-off-by: Alex Deucher (cherry picked from commit c54e4d10507722398dc90cf3c532e50b86cf425a) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 7bed07cb4daa610cd6d92d9e72a575275a99ed54 Author: Krzysztof Karas Date: Fri Sep 11 06:11:45 2026 +0000 drm/i915/gem: Prevent overstepping exec array boundary commit ebe162db655881a38de43301151ff7ac940602b5 upstream. It is possible for eb_relocate_parse_slow() to call kvfree() on entries outside the original exec array during following scenario inside eb_relocate_parse_slow(): 1) eb_copy_relocations() allocates as many as eb->buffer_count copies for exec entries; 2) eb_parse() appends up to two VMAs, right after incrementing eb->buffer_count; 3) cleanup under "out" label uses this incremented buffer_count to release relocation pointers from exec array via kvfree(), not from VMA array. To amend this problem, ensure that relocation cleanup uses the original exec object count, excluding the VMAs appended by the command parser. Fixes: 8e4ba491b0ba ("drm/i915: Parse command buffer earlier in eb_relocate(slow)") Signed-off-by: Krzysztof Karas Assisted-by: GitHub-Copilot:gpt-6-astra Cc: stable@vger.kernel.org # 5.10+ Reviewed-by: Andi Shyti Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20260911061145.3535489-1-krzysztof.karas@intel.com (cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman commit b2b915042be073637d9f93dc51ef15fc0685ae8a Author: Palla Raghunath Date: Fri Oct 2 08:07:52 2026 +0100 Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown commit 08e90633377f1b2567ab5ad6810b74c552246a07 upstream. syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so the tty device is only moved when it was actually registered. Fixes: cad348a17e17 ("Bluetooth: Implement .activate, .shutdown and .carrier_raised methods") Reported-by: syzbot+4a807caf7680652d53b6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4a807caf7680652d53b6 Cc: stable@vger.kernel.org Signed-off-by: Palla Raghunath Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 05145638e0db770267c39615c8ce51ab058e34cf Author: Maxim Skokov Date: Tue Sep 15 10:00:46 2026 +0300 Bluetooth: RFCOMM: free the skb when the DLC has no owner commit 9d1afbf60ed53c5b051cd124153e0ae3078c8b93 upstream. rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dlcs() keeps granting credits, so the remote keeps sending and the leak keeps growing. Free the skb, as the tty side does. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Mikhail Gavrilov Closes: https://lore.kernel.org/linux-bluetooth/CABXGCsPe5wykd8Aj-hm+SJ7SGQyb8yoGNnx3XDpPmBathj+EGg@mail.gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Maxim Skokov Assisted-by: Claude:claude-opus-5 Reviewed-by: Mikhail Gavrilov Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 88f47e66b1a6e0bfc350676937f3b552b434e74c Author: Chengfeng Ye Date: Mon Oct 5 00:24:42 2026 +0800 Bluetooth: hci_sock: Serialize dead-device detachment commit 381a0925c556a8d91a80a9b9e3e86651d60ffee3 upstream. Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when clearing the device pointer and resetting the socket state. This waits for existing replay and delivery readers to finish before detachment and prevents later readers from using the old binding. Keep hci_dev_put() outside the critical section because the final device release can sleep. Fixes: e04480920d1e ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") Cc: stable@vger.kernel.org Assisted-by: GPT-6 Astra Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit f66aa567030317f76b76c4fdc2d3bddf0bfd8dcc Author: Runyu Xiao Date: Thu Sep 10 17:24:05 2026 +0800 scsi: qedi: Initialize callback state before registration commit 85de8b3a5eaa23d153aff4c7c83dddbc949064c9 upstream. qedi_get_protocol_tlv_data() can be called asynchronously by QED after qedi_ops->register_ops(). It takes stats_lock and reads ll2_mtu, but __qedi_probe() currently registers the callback before initializing the mutex and assigning the default MTU on the normal probe path. Initialize the callback-visible state before registering qedi_cb_ops. Keep the recovery path from reinitializing state because it reuses the existing qedi context. Fixes: 3cc5746e5ad7 ("scsi: qedi: Initialize the stats mutex lock") Cc: stable@vger.kernel.org Assisted-by: LLM Codex Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260910092405.1300129-1-runyu.xiao@seu.edu.cn Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Greg Kroah-Hartman commit 4cc1e849bb7dd8deb37f6a51e1aaf725e2016595 Author: Abhishek Ojha Date: Tue Sep 1 21:07:01 2026 -0400 regulator: ltc3676: don't read the write-only HRST and CLIRQ registers commit 28c2388ee24cdbefbcc458fa41ef7bffaaa1cc83 upstream. HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT). Fixes: 37b918a034fe ("regulator: Add LTC3676 support") Cc: stable@vger.kernel.org Signed-off-by: Abhishek Ojha Link: https://patch.msgid.link/20260902010701.3360310-1-Abhishek.ojha@savoirfairelinux.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit ef77dd59cb7b7b0ac0bedd3fe9ee7a8acd8a58f2 Author: Denis V. Lunev Date: Tue Sep 29 09:25:19 2026 +0200 openvswitch: fix soft lockup in the netlink flow dump commit aaaaf87ea99b8766c9a8aa0e71aa42e6bc8a5320 upstream. A production compute node carrying a few thousand datapath flows hit a soft lockup inside a single netlink flow dump and panicked. ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it emits, and that releases stats->lock with spin_unlock_bh() once per CPU that has touched the flow. Every release is a local_bh_enable(), and each one runs the pending softirq backlog in the dumping thread's own context. The skb bounds the flows one callback emits, but not the softirq work it absorbs. On a CPU that carries the box's packet load the backlog refills as fast as it drains, so the dumping thread becomes that CPU's softirq engine. It never sleeps and it has no reschedule point, so under voluntary preemption nothing can take the CPU away from it: neither the ksoftirqd the kernel woke to take the work over, nor the stopper thread the softlockup detector dispatches to refresh its timestamp. Hold BH off across the whole callback instead, the way ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop draining softirqs. The loop already runs under rcu_read_lock() and cannot sleep. What it gives up is preemption under CONFIG_PREEMPT, since a BH-off region is not preemptible outside PREEMPT_RT. The region stays short: the skb caps the flows one callback emits, and empty buckets cost no skb space but are each visited once per dump, as the cursor only moves forward. The table grows on insert and shrinks only on flush, so the walk is bounded by the largest flow count the datapath has held. The softirq backlog the callback used to absorb has no bound at all. Fixes: 63e7959c4b9b ("openvswitch: Per NUMA node flow stats.") Cc: stable@vger.kernel.org Signed-off-by: Denis V. Lunev Reviewed-by: Ilya Maximets Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit ef4af025ec92ebd43200812215fe1a5c01432a20 Author: Fredrik Nyberg Date: Fri Oct 2 14:28:57 2026 +0200 net: usb: ax88179_178a: fix rx frame length for non-last packets commit 9b6c20f788472d2042717a3c2f1bc60b2b77083e upstream. Commit 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") replaced skb_clone() with a copy into a new skb for every packet of a bulk-in transfer except the last one. The copy skips the 2-byte IP alignment pseudo header but still copies pkt_len bytes, and pkt_len includes that header. Each of these frames is therefore delivered with two extra trailing bytes: the 0xeeee pseudo header of the next slot when the frame ends on an 8-byte boundary, or slot padding otherwise. The last packet is still trimmed to pkt_len - 2. IPv4 and IPv6 trim the extra bytes, so most traffic is unaffected. Anything that relies on the frame length is not. MACsec takes the ICV from the last 16 bytes and drops every such frame as InPktsNotValid. In our setup that was 0.2-1.2% of received MACsec frames, depending on how many frames shared a transfer, including service discovery multicast. Allocate and copy pkt_len - 2 bytes, like the last-packet path. Fixes: 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Cc: stable@vger.kernel.org Signed-off-by: Fredrik Nyberg Reviewed-by: Simon Horman Link: https://patch.msgid.link/20261002-ax88179-rx-len-v1-1-f01a2a295079@volvocars.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5d0fa089d5ed497366ea5c000c6eefb346c7cb01 Author: Chengfeng Ye Date: Thu Oct 8 16:44:44 2026 +0800 net/smc: protect clcsock lifetime in smc_getname commit 64a6b36b0e1855288080bc5f89769f27d6dc03c8 upstream. smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise. Fixes: b03faa1fafc8 ("net/smc: postpone release of clcsock") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Reviewed-by: Mahanta Jambigi Reviewed-by: Dust Li Link: https://patch.msgid.link/20261008084444.787449-1-nicoyip.dev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 48aa1155fa8d83362fc33d02d527a3c3fe40ce1c Author: Quchaosheng Date: Mon Sep 28 19:31:08 2026 +0800 net/packet: guard the ll header push in packet_rcv_spkt() commit 28bc1ef699610ee09ce3d46a00552f5a0a0144bd upstream. packet_rcv_spkt() restores the link layer header with skb_push(skb, skb->data - skb_mac_header(skb)); That subtraction is only meaningful when the device actually has a link layer header. packet_rcv() and tpacket_rcv() both wrap it in dev_has_header(), which is also the predicate the block comment at the top of the file states the restore in terms of; packet_rcv_spkt() does not. commit d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") introduced the helper and changed the two call sites, and this one stayed behind. A device without a visible ll header can leave skb->mac_header at the 0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does: init_can_skb() sets pkt_type and ip_summed but does not reset the headers, and commit 9f10374bb024 ("can: remove private CAN skb headroom infrastructure") dropped the skb_reset_*_header() calls that used to be there. skb_mac_header() is then 0xFFFF, the length becomes a large negative number and skb_push() reports it through skb_under_panic() -- from softirq context, so it is a full system panic even with panic_on_oops=0: skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0 kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x50/0x60 Call Trace: skb_push+0x38/0x40 packet_rcv_spkt+0xe1/0x170 __netif_receive_skb_core.constprop.0+0x7e8/0xd30 ... Kernel panic - not syncing: Fatal exception in interrupt The socket type is reachable: packet_create() accepts SOCK_PACKET alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check, and neither the socket length nor a capability check keeps it away from a CAN interface. The missing skb_reset_*_header() calls in init_can_skb() are a regression in their own right and are being fixed separately, but a packet socket should not turn a link layer that did not initialise its mac header into a kernel panic. Guard the push the way the other two receive paths do. Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is the driver RX path: vcan does not reproduce it, because can_send() resets the headers on the way out. One SOCK_PACKET socket bound to can0 and one frame written into the line discipline panics an unpatched kernel with the trace above; the same image with this patch prints no panic and powers off normally. Both kernels are this tree, defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. Fixes: d549699048b4 ("net/packet: fix packet receive on L3 devices without visible hard header") Cc: stable@vger.kernel.org Signed-off-by: Quchaosheng Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260928113108.2127215-1-quchaosheng000406@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit a0c7facc0fe9ec772cf8bffac2315a8e1311d39a Author: Guangshuo Li Date: Wed Sep 16 00:19:47 2026 +0800 mmc: sdhci-sprd: disable runtime PM on remove commit e1c6c10a6a70a69e29b04fcc1ebe4b9bcbc7a49a upstream. sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does not perform the corresponding runtime PM cleanup. The probe failure path disables runtime PM before disabling the clocks, but the normal remove path directly disables clocks that are also managed by the runtime PM callbacks. If the device is runtime suspended, those clocks may already be disabled. Resume the device before removal, disable runtime PM and drop the temporary runtime PM reference before disabling the clocks. This issue was found by manual code inspection. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Reviewed-by: Baolin Wang Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit d8ce81006ee4e42ce2d0bd3a2ab87adc1e24ef11 Author: Yibo Tan Date: Tue Sep 15 22:44:57 2026 +0800 mmc: mtk-sd: Cancel request timeout work on remove commit b38af5386a74416e898955443f2e26547b358cb2 upstream. The driver queues req_timeout while a request is active. msdc_request_done() uses cancel_delayed_work(), which does not wait for a timeout callback that has already started. The timeout callback calls mmc_request_done(), which wakes the request waiter, and then continues to use host->dev_comp and check the SDIO IRQ. During unbind, msdc_drv_remove() can return and the managed mmc_host can be freed before the callback finishes. KASAN reported use-after-free accesses in msdc_request_done() and msdc_recheck_sdio_irq() in each of three unbind tests. The same tests completed without a kernel diagnostic after this change. Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new requests and before the driver releases the host resources. Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5 Signed-off-by: Yibo Tan Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 48faa0fb896088b8a1640f083ea46e850d23bffd Author: Guangshuo Li Date: Wed Sep 16 00:13:10 2026 +0800 mmc: cavium-thunderx: destroy slot platform devices on remove commit 29ee8cf18a21b02cd0b2e35f741b61cd1fe3e14e upstream. thunder_mmc_probe() creates host->slot_pdev[i] with of_platform_device_create(), while thunder_mmc_remove() does not destroy the child platform devices. The probe failure path removes each MMC slot and destroys its associated platform device, but the normal remove path only removes the MMC slot. As a result, the child platform devices remain registered after the ThunderX MMC controller is removed. Destroy each slot platform device during removal after cleaning up the corresponding MMC slot, matching the probe failure cleanup path. Keep an extra device reference around of_platform_device_destroy() as done in the existing error path. This issue was found by manual code inspection. Fixes: 166bac38c3c56 ("mmc: cavium: Add MMC PCI driver for ThunderX SOCs") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 078ccae745c33db6c48b4d0eb1e56e59828216de Author: Guangshuo Li Date: Tue Sep 15 23:57:24 2026 +0800 mmc: cavium-octeon: destroy slot platform devices on remove commit 0f4d4424fc1d651ec3fa63a0a8060ba9087eb0ec upstream. octeon_mmc_probe() creates host->slot_pdev[i] with of_platform_device_create(), while octeon_mmc_remove() does not destroy the child platform devices. The probe failure path removes each MMC slot and destroys its associated platform device, but the normal remove path only removes the MMC slot. As a result, the child platform devices remain registered after the Octeon MMC controller is removed. Destroy each slot platform device during removal after cleaning up the corresponding MMC slot, matching the probe failure cleanup path. This issue was found by manual code inspection. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 4fa0672f3ecd6b54bb3b08ac81bb62369726d3a7 Author: Ma Xinmeng <1564938642@qq.com> Date: Fri Sep 25 11:05:39 2026 +0800 dm-snap: reject the transient exception store for snapshot-merge commit fcbde6227fcc53c73f08c56b2539e462d545cac6 upstream. snapshot_merge_next_chunks() calls s->store->type->prepare_merge() without checking it. The transient store ("N") implements neither prepare_merge nor commit_merge, and snapshot_ctr() validates those callbacks only on the handover path (__validate_exception_handover()), so a directly constructed snapshot-merge calls a NULL prepare_merge on resume: snapshot_merge_resume -> snapshot_merge_next_chunks -> prepare_merge(...) commit_merge() is NULL for the same reason. Userspace only issues documented device-mapper ioctls (CAP_SYS_ADMIN); this is a misconfiguration the kernel must reject rather than oops on. Reject the combination in snapshot_ctr() at table-load time (-EINVAL), the same check the handover path already performs; this also covers the commit_merge() call site, which a guard local to the prepare_merge call would miss. Tested on Linux v6.6.157 KASAN: unpatched, the dmsetup reproducer oopses in snapshot_merge_next_chunks(); with this patch, the table load fails with -EINVAL and no oops. Also present on v6.6.145; still present on the linux-dm tree (555f3d7be91a) and on torvalds/linux master (62f4c998b297) as of 2026-09-22. Note that this is not a security bug because only root can trigger it. Signed-off-by: Ma Xinmeng <1564938642@qq.com> Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit a04546fa65cbcf4a2774f93f365d747a19abb9b8 Author: Ben Cressey Date: Tue Sep 15 00:39:10 2026 +0000 dm-crypt: reject the lmk IV mode with AEAD ciphers commit 3195e0daf590683992edb4eed32269e569e04924 upstream. A "capi:" table line that pairs an AEAD cipher with the lmk IV mode, for example "capi:gcm(aes)-lmk" with the integrity:28:aead option, causes an oops when it is loaded. lmk sets tfms_count to 64, but crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey reads past the end of the tfms_aead array and calls crypto_aead_setkey on the values it finds there. lmk exists for compatibility with Loop-AES, which uses CBC, so refuse it with an AEAD cipher rather than allocate 64 AEAD transforms. The check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because the IV constructor runs after crypt_set_key. Note that this is not a security bug because the memory corruption can only be triggered by root. Fixes: 33d2f09fcb35 ("dm crypt: introduce new format of cipher with "capi:" prefix") Cc: stable@vger.kernel.org Signed-off-by: Ben Cressey Assisted-by: LLM Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit c48245ef696e590e92cbfb622625642bec8dbbad Author: Nguyen Ngoc Thang Date: Wed Sep 30 21:07:48 2026 +0700 memstick: rtsx_usb_ms: complete requests after eject instead of dropping them commit c96ca94425b076dc398d929366e378d1e22ec794 upstream. memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req. Fixes: 99451dceeb5f ("memstick: Add realtek USB memstick host driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20260924204142.607-1-rajojha047@gmail.com/ Signed-off-by: Nguyen Ngoc Thang Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit b90f33ad9179c69658342323382bfed158f88cb9 Author: Raj Ojha Date: Fri Sep 25 00:59:55 2026 +0530 memstick: core: wait for request completion before freeing card commit aa0a37b5024d921e96ac4f8f487c8bfbf1f1a582 upstream. In memstick_alloc_card() and memstick_set_rw_addr(), wait_for_completion_timeout() is used to wait for device identification and address configuration requests to complete. The memstick subsystem does not provide an abort or cancellation callback in struct memstick_host for in-flight requests. If wait_for_completion_timeout() expires (for instance, when a USB transfer or command retry is delayed), memstick_alloc_card() returns an error and frees the memstick_dev structure via kfree(card). However, the host controller driver (such as rtsx_usb_ms) is still running the request asynchronously in worker context. When the transfer eventually finishes, the driver writes into host->req->data, which points to memory inside the already freed card structure. This leads to a KASAN slab-use-after-free write: BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990 Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239 Workqueue: events rtsx_usb_ms_handle_req Call Trace: ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450 rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline] rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560 kthread+0x373/0x450 kernel/kthread.c:436 Allocated by task 1662: memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline] memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Freed by task 1662: kfree+0x20c/0x650 mm/slub.c:6792 memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline] memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452 process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396 Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already implement their own hardware and bus timeouts, and callers in mspro_block and ms_block already rely on wait_for_completion() unconditionally. Replace wait_for_completion_timeout() with wait_for_completion() in memstick_set_rw_addr() and memstick_alloc_card() so that the card structure is never freed while an asynchronous request is in flight. Fixes: baf8532a147d ("memstick: initial commit for Sony MemoryStick support") Reported-by: syzbot+ccffdf05833ebdaeae70@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccffdf05833ebdaeae70 Cc: stable@vger.kernel.org Signed-off-by: Raj Ojha Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 24806fc9bca28fa1433bf938d1424dcb45d80e50 Author: 성병찬 Date: Wed Sep 30 13:18:01 2026 +0900 KEYS: Fix add_key() race with keyring restriction commit dd3ea3fcba7c75493760cdbccd35f029597e8d5e upstream. __key_create_or_update() snapshots keyring->restrict_link before taking the destination keyring's semaphore. keyring_restrict() installs a restriction while holding that semaphore. This allows a writer to observe no restriction, wait for the keyring owner to install a reject-all restriction and return successfully, and then link a key using the stale NULL snapshot. The writer only needs write permission on the destination keyring. Move the restrict_link read after __key_link_lock() and __key_link_begin(). The read and the subsequent restriction check are then serialized with restriction installation by keyring->sem. The race was reproduced on v7.2.8 in 19 executions where restriction installation returned before the link completed. All 19 linked the key despite the reject-all restriction. With this change, 312 executions reached the same ordering and every add_key() call failed with -EPERM. The issue was found by manual concurrency analysis assisted by AI-based analysis and independently verified with a QEMU reproducer and kernel instrumentation. Fixes: 5ac7eace2d00 ("KEYS: Add a facility to restrict new links into a keyring") Cc: stable@vger.kernel.org Signed-off-by: 성병찬 Reviewed-by: Jarkko Sakkinen Link: https://lore.kernel.org/r/20260930041802.6114-1-tjdqudcks0424@naver.com Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 872a38b6ab30048e6f109946c0942fcf60993424 Author: Karl Mehltretter Date: Sat Sep 12 11:54:40 2026 +0200 keys: finalize persistent keyring timeout after link attempt commit 25bf14f817168079f731975b8998fc2af380f29e upstream. When no keyring exists for the requested UID, KEYCTL_GET_PERSISTENT creates and registers one before linking it to the requested destination. The configured timeout is set only after the destination link succeeds. A destination restricted with KEYCTL_RESTRICT_KEYRING makes that link fail with -EPERM. With persistent_keyring_expiry set to 60 seconds, /proc/keys still reports the registered keyring's expiry as "perm". The failed call therefore leaves a quota-exempt keyring in the namespace's hidden register, where it may remain until namespace teardown. Rename the write-locked helper to key_get_or_create_persistent() and return the key reference through a result parameter. Return 0 when it creates a keyring and 1 when the retry finds an existing one. Return a negative error on failure. Another caller may create the keyring between the initial read-locked lookup and the retry under the write lock. Set the timeout after permission checking and linking. Do this on success, or on failure if the call allocated the keyring. This leaves a new keyring collectible after failure without starting its timeout while linking is still in progress. Cc: stable@vger.kernel.org # v5.10+ Fixes: f36f8c75ae2e ("KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches") Assisted-by: LLM Signed-off-by: Karl Mehltretter Link: https://lore.kernel.org/r/20260912095440.79864-1-kmehltretter@gmail.com Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 073df7871a7023298ce27cfa518fbc30cc155651 Author: Mingming Cao Date: Fri Sep 25 11:05:29 2026 -0700 ibmveth: h_free logical LAN on open-fail after register commit af0524bf4ce1a4cbd2946aa81751582951cfcab5 upstream. ibmveth_open() registers the logical LAN, then allocates the RX buffer pools. A pool failure jumps to out_free_buffer_pools without h_free_logical_lan(), so PHYP still owns the buffer-list page when it is unmapped. request_irq() failure already issued the hypercall before taking the same label. Move that h_free to the shared post-register unwind so both paths deregister before the buffer list is unmapped. Fixes: d43732ce021f ("ibmveth: properly unwind on init errors") Cc: stable@vger.kernel.org Signed-off-by: Mingming Cao Reviewed-by: Dave Marquardt Link: https://patch.msgid.link/7a56fbfb9e0674f011f4e310fbd7dfd8e67c30aa.1790357373.git.mmc@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit d038ab3df215a552ffbd02084fffba13fd525106 Author: Hui Peng Date: Wed Sep 30 04:46:11 2026 +0000 sctp: copy zeroed stats to user in sctp_getsockopt_pr_streamstatus() when !streamoute commit 538b529509c7ab0d909cb65bb7264edca1788d30 upstream. When an SCTP stream output extension structure (streamoute) has not yet been allocated, sctp_getsockopt_pr_streamstatus() sets the local stack variables params.sprstat_abandoned_unsent = 0 and params.sprstat_abandoned_sent = 0, but then immediately jumps to 'out:', bypassing copy_to_user(). As a result, when an uninitialized user buffer is passed to getsockopt(SCTP_PR_STREAM_STATUS), the kernel returns success (0) without copying the zeroed stats back to user space, leaving uninitialized data in the user buffer. Refactor the !streamoute check into an if-else chain so that when streamoute is NULL, params is zeroed and falls through to copy_to_user(), copying the zeroed stats to user space and setting retval = 0 once before returning. Tested in QEMU against Linux 7.3.0-rc3 using an uninitialized sctp_prstatus user struct passed to getsockopt(SCTP_PR_STREAM_STATUS) on a freshly created stream: on the unfixed kernel the user struct contains uninitialized stack garbage; whereas with this fix applied, getsockopt() copies zeroed stats into user space and returns 0. Cc: stable@vger.kernel.org Reviewed-by: Xin Long Signed-off-by: Hui Peng Fixes: f952be79cebd ("sctp: introduce struct sctp_stream_out_ext") Link: https://patch.msgid.link/20260930044611.204739-1-benquike@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 22987d24a159ed7df3cdc9090ca5d61e58df0cac Author: Stephen Smalley Date: Mon Sep 28 10:19:17 2026 -0400 selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts commit 28b7260548af3d35773477993ad4e4de41578dd7 upstream. When an NFSv4 filesystem exported with security_label is mounted a second time, sget_fc() returns the existing superblock and nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an early exit without setting SECURITY_LSM_NATIVE_LABELS in *set_kern_flags. nfs_get_root() then sees kflags without SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on the shared nfs_server, silently disabling per-file labeling for both the new and the original mount. Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS on reused superblock") fixed the same problem in selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain second mount now goes through sb_set_mnt_opts rather than sb_clone_mnt_opts, so it needs the same treatment: on both SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in *set_kern_flags when the superblock was already using SECURITY_FS_USE_NATVE. Cc: stable@vger.kernel.org Closes: https://github.com/SELinuxProject/selinux-kernel/issues/69 Closes: https://github.com/SELinuxProject/selinux-kernel/issues/70 Closes: https://github.com/SELinuxProject/selinux-testsuite/issues/91 Closes: https://github.com/SELinuxProject/selinux-testsuite/issues/92 Fixes: eb9ae686507b ("SELinux: Add new labeling type native labels") Signed-off-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 942d73667a0af708207a49c38ca4256b6c50b59a Author: Johannes Berg Date: Wed Oct 7 22:42:08 2026 +0200 Revert "wifi: libertas: reject short monitor TX frames" commit 9727d1c4e1c971fc42b049b645fdda6852758835 upstream. This reverts commit 13ff543e0b2c713aedeaadadde686686e949dc78. The 'goto free' just made things worse, causing a spinlock to be handled incorrectly. Revert this for now. Reported-by: Takashi Iwai Cc: stable@vger.kernel.org Fixes: 13ff543e0b2c ("wifi: libertas: reject short monitor TX frames") Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 384edc67201f8561b7de952647b923f0524b1f36 Author: Chengfeng Ye Date: Tue Sep 29 00:12:46 2026 +0800 tipc: hold a reference to nodes found by link name commit 17e73bae400f6a434dc006e3bee92c94cf781954 upstream. tipc_node_find_by_name() returns a node after dropping its RCU read lock without taking a reference. The LINK_SET, LINK_GET and LINK_RESET_STATS handlers then lock and access the node, racing with timer-driven cleanup of a down peer. Generic netlink serialization does not exclude the node timer. The following interleaving can leave a handler using a freed node: CPU 0: find the node under RCU and release the node read lock CPU 1: tipc_node_timeout() clears the links and unlinks the down node CPU 1: drop the list and timer references, queuing tipc_node_free() CPU 0: leave the RCU read-side critical section CPU 1: complete the grace period and free the node CPU 0: acquire the node lock through the stale pointer LINK_SET also uses the node's media address after releasing the node lock, when passing queued packets to tipc_bearer_xmit(). KASAN on v7.3-rc5 reported: BUG: KASAN: slab-use-after-free in _raw_read_lock_bh Write of size 4 at addr ffff88807e06f008 by task poc/92 Call Trace: _raw_read_lock_bh kernel/locking/spinlock.c:287 tipc_nl_node_set_link net/tipc/node.c:2475 genl_family_rcv_msg_doit net/netlink/genetlink.c:1114 genl_rcv_msg net/netlink/genetlink.c:1209 netlink_rcv_skb net/netlink/af_netlink.c:2575 Allocated by task 0: tipc_node_create net/tipc/node.c:539 tipc_node_check_dest net/tipc/node.c:1196 tipc_disc_rcv net/tipc/discover.c:252 Freed by task 92: kfree mm/slub.c:6801 rcu_core kernel/rcu/tree.c:2919 Last potentially related work creation: __call_rcu_common.constprop.0 kernel/rcu/tree.c:3181 tipc_node_timeout net/tipc/node.c:814 Acquire a reference to the selected node with kref_get_unless_zero() before leaving RCU, returning NULL if the node has already been released. Release that reference on every caller exit after the last node access, including transmission in LINK_SET. Keep the existing link lookup order and locking so concurrent link removal still takes the existing error paths. Fixes: 6a939f365bdb ("tipc: Auto removal of peer down node instance") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Link: https://patch.msgid.link/20260928161246.1895273-1-nicoyip.dev@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 09dbd610f78aaed65d7b379c270ce4090a8151ac Author: Yuqi Xu Date: Mon Sep 28 16:24:38 2026 +0800 tipc: destroy topsrv workqueues before closing connections commit 3acdd44385bc7e2e57605e073691ce69cc5a960d upstream. tipc_topsrv_stop() closed subscriber connections while the topology server's send and receive workqueues were still running. Socket callbacks and subscription events could then queue more work, and in-flight send/recv work could drop the last connection reference during the conn_idr walk. That race produced several teardown failures: refcount_t addition on 0 from conn_get() on a connection whose release was blocked on idr_lock, a subsequent use-after-free in tipc_conn_close(), queue_work() on an already destroyed workqueue from the listener data-ready callback, and an RCU stall in tipc_topsrv_exit_net() while the walk spun under idr_lock. Clear srv->listener under idr_lock so it acts as a shutdown flag, skip queue_work() once it is NULL, destroy the workqueues to flush in-flight work, and only then close the remaining connections. Refuse tipc_conn_lookup() after that flag is cleared, and drop idr_lock when the teardown walk finds no connection, so an in-flight subscription event cannot pin idr_in_use while the walk holds the lock. v3 supersedes the narrower in-thread diff Tung Quang Nguyen posted on 2026-09-23. It keeps his teardown order and adds the lookup refusal and the empty-idr unlock. Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Signed-off-by: Yuqi Xu Reviewed-by: Ren Wei Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b09071e2f8460b35c7d355addad0fc7b31c6904d Author: Sabrina Dubroca Date: Mon Oct 5 15:50:02 2026 +0200 strparser: make sure __strp_recv isn't running before tearing down the parser commit 0984ebc631792acf8fff105112ee74a6b8f1efcc upstream. The comment above strp_done() claims that if strp is stopped, strp_recv will no longer be called. That's only true if the caller has a mechanism (eg locking) to guarantee that strp_recv() calls that started before strp_stop() have completed by the time we call strp_done(). This adds a dummy lock_sock/release_sock pair to guarantee that any in-flight strp_recv() (which runs under either bh_lock_sock or lock_sock, depending if it's called from ->sk_data_ready or strp_work) has completed. Only espintcp can be affected by this race condition, but this patch makes sure no future user of strp can have the bug. This could crash on strp->sk ("general mode" of strp), but this mode has been here for 9 years and has never been used. It'll be gone soon, no point worrying about it. Switch the stopped/paused/etc bits to u8's to avoid races between strp_stop() and strp_pause/unpause(). A reproducer has been published and turns the possible UAF into an exploit [1]. Reported-by: Hyunwoo Kim Link: https://lore.kernel.org/all/aZLn2Faeg1FB7XOf@v4bel/ Link: https://lore.kernel.org/all/aZgpkyTDU3aXe_V0@v4bel/ Link: https://github.com/m0x41nos/RustyTux [1] Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Cc: stable@vger.kernel.org Signed-off-by: Sabrina Dubroca Reviewed-by: Hyunwoo Kim Link: https://patch.msgid.link/425d9d926709b542ed5331110c19fee4aee1f28d.1791206940.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 6e6bd1051daabc327233c3ca3d00613fc6783c8e Author: Josef Bacik Date: Wed Oct 7 17:57:32 2026 +0000 xen/netfront: don't leak the skb when xennet_fill_frags() fails commit 93ccaf1c26e2133396173b76a071e59024daa622 upstream. When a response chain has more slots than fit in the skb's frags, xennet_fill_frags() returns an error and xennet_poll() jumps to its error path. That path moves what's left on tmpq to errq to be freed, but the skb being filled was already dequeued from tmpq, so it's never freed. Each chain that overflows leaks the skb and the pages attached to it as frags, and the backend decides how many slots it sends. Put the skb back on tmpq before taking the error path, like the xennet_set_skb_gso() failure just above it does. Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags") Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik Reviewed-by: Juergen Gross Link: https://patch.msgid.link/20261007-b4-xen-netfront-fill-frags-leak-v1-1-a8a01ff9cd52@toxicpanda.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 73bec442f913855907b63225306dd162c18e5c71 Author: Pavankumar Kondeti Date: Mon Sep 28 09:18:56 2026 +0530 workqueue: Fix NULL current_pwq deref in chained work check commit 980db94e3eeefdd8a1c46f86412c33a7f7806f51 upstream. current_wq_worker() only tells us that %current is a kworker. It does not guarantee that the worker is currently executing a work item, as worker->current_pwq is populated only while process_one_work() is running the work function. is_chained_work() can be reached while queueing on a draining or destroying workqueue. If a kworker outside work-item execution reaches that path, current_wq_worker() returns a worker but worker->current_pwq is NULL, and the chained-work test can fault before it emits the intended warning. Guard the chained-work test with worker->current_pwq. A kworker without current_pwq is not executing work on the target workqueue, so the helper should return false and let the draining/destroying warning fire. Fixes: 8d03ecfe4718 ("workqueue: reimplement is_chained_work() using current_wq_worker()") Cc: stable@vger.kernel.org Signed-off-by: Pavankumar Kondeti Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman commit dbd1e21f4301bd2157cd771255f1ca6ba1c8a1f9 Author: Jason A. Donenfeld Date: Thu Oct 8 14:59:16 2026 +0200 wireguard: noise: reject response consumption after intermediate initiation commit d0305f8d90029556260c6824b61c493c424eba9e upstream. Two threads begin processing the identical response message, received twice. The first thread, A, runs. While it's running, the second one, B, gets partway through, and during that slow calculation, or even while blocking on down_write(), A completes and then also a handshake initiation that's already been queued up runs in thread C, which itself takes that same down_write(). The handshake initiation creation succeeds, and sets the state back to waiting-for-response, and calls up_write(), at which point thread B resumes, because either its finished its calculations or was finally allowed to acquire down_write(). Thread B then copies the state back to the peer, and begins a new session, using that state, which is the same session as the one made in thread A. Thread A Thread B Thread C down_read() sA = handshake->state memcpy(cA, handshake->crypto) up_read() if (sA != 1) goto fail slow_crypto(cA) down_read() sB = handshake->state memcpy(cB, handshake->crypto) up_read() if (sB != 1) goto fail slow_crypto(cB) down_write() if (sA != handshake->state) goto fail memcpy(handshake->crypto, cA) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() down_write() slow_crypto(handshake->crypto) handshake->state = 1 up_write() down_write() if (sB != handshake->state) goto fail memcpy(handshake->crypto, cB) handshake->state = 2 up_write() down_write() if (handshake->state != 2) goto fail derive_session(handshake->crypto) up_write() This seems basically impossible to hit in a meaningful way in practice, but ensure that it absolutely cannot happen by comparing the ephemeral private key that's on the stack with the latest one that the peer's handshake state has. Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Jérémy Jean Signed-off-by: Jason A. Donenfeld Link: https://patch.msgid.link/20261008130124.724119-4-Jason@zx2c4.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit aaa93e41ae308ad9ff9d9ba3296a0d0f4d45bad3 Author: Palla Raghunath Date: Sat Sep 19 00:43:39 2026 +0100 dm ioctl: don't let data_start run past the buffer commit 9b3fcf519d370df94a56f3b272d9eddffffa5be8 upstream. struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root. Reported-by: syzbot+48d935cf48a4a76be346@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=48d935cf48a4a76be346 Fixes: 76c072b48e39 ("dm ioctl: move compat code") Cc: stable@vger.kernel.org Signed-off-by: Palla Raghunath Signed-off-by: Mikulas Patocka Signed-off-by: Greg Kroah-Hartman commit caebda739a724f0db57753351c01eaf2bf610576 Author: Wentao Liang Date: Wed Sep 16 17:16:10 2026 +0000 btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode() commit 1fd742c7479961da6d0bb794ef8ac6b7b9442847 upstream. When paths_from_inode() fails, scrub_print_warning_inode() jumps to err without dropping the reference taken by btrfs_get_fs_root(), leaking a reference to the root every time path resolution fails while printing scrub warnings. Every other error and success path of the function drops the reference. Drop the reference on the paths_from_inode() failure path too. Fixes: 558540c17771 ("btrfs scrub: print paths of corrupted files") CC: stable@vger.kernel.org Reviewed-by: Qu Wenruo Signed-off-by: Wentao Liang Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit fc4f22f27723673f63a688f79ecc86b25af7288e Author: Eric Biggers Date: Sat Oct 10 10:17:20 2026 +0200 crypto: drbg - Fix ineffective sanity check commit 040ad83b0e8aa065fd2fc641cacba8491a8b186d upstream. Fix drbg_healthcheck_sanity() to correctly check the return value of drbg_generate(). drbg_generate() returns 0 on success, or a negative errno value on failure. drbg_healthcheck_sanity() incorrectly assumed that it returned a positive value on success. This didn't make the sanity check fail, but it made it ineffective. Fixes: cde001e4c3c3 ("crypto: rng - RNGs must return 0 in success case") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit c5475ec65fd49692b9a6cc58ddf59b5f472cbd86 Author: Carlos Llamas Date: Sun Oct 11 10:39:10 2026 +0000 HID: uhid: convert to hid_safe_input_report() [ Upstream commit 63a694c51bf120a37550890b8e7736b4888985e9 ] Commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()"), added a check in hid_report_raw_event() to reject reports if the received data size is smaller than expected. This was intended to prevent OOB errors by no longer allowing zeroing-out of shorter reports due to the lack of buffer size information. However, this leads to regressions in hid_report_raw_event(), where shorter than expected reports are rejected, even though their buffers are sufficiently large to be zero-padded. To solve this issue, Benjamin introduced a safer alternative in commit 206342541fc8 ("HID: core: introduce hid_safe_input_report()"), which forwards the buffer size and allows hid_report_raw_event() to safely zero-pad the data. Convert uhid to use hid_safe_input_report() and pass UHID_DATA_MAX as the buffer size. This prevents the reported regressions [1], allowing hid core to zero-pad the shorter reports safely as expected. Cc: stable@vger.kernel.org Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ [1] Signed-off-by: Carlos Llamas Reviewed-by: Lee Jones Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ Signed-off-by: Jiri Kosina Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit abfa3cf289397ce9db5de7ba0ea54bea6a71c9ce Author: Benjamin Tissoires Date: Sun Oct 11 10:39:09 2026 +0000 HID: core: introduce hid_safe_input_report() [ Upstream commit 206342541fc887ae919774a43942dc883161fece ] hid_input_report() is used in too many places to have a commit that doesn't cross subsystem borders. Instead of changing the API, introduce a new one when things matters in the transport layers: - usbhid - i2chid This effectively revert to the old behavior for those two transport layers. Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (cherry picked from commit a9527c32cc9d98252dc975d6fcb29f2013d0f63a) [Lee: Implement hid_safe_input_report() directly and wrap it from hid_input_report() as 67eccf151d76 ("HID: add source argument to HID low level functions") is not present. Use int for report type and literal 2 in i2c_hid_get_input() as 56fc4f7bc114 and 1bdbe0dcff2f are not present] Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit bb774beb46edcd9f90a4a4f09b448a139a3cc30c Author: Cong Nguyen Date: Wed Oct 7 04:53:39 2026 -0400 iio: adc: max1363: sign-extend bipolar differential channel reads [ Upstream commit 91908c0a78baddc8572aa3ab69e62ee2eb496ba4 ] MAX1363 differential channels are bipolar, but max1363_read_single_chan() masks the raw value to the ADC resolution without sign-extending it. Negative differential readings are therefore reported to userspace as large positive values (e.g. -1 as 4095 on a 12-bit part). Sign-extend the masked value from the resolution bit for differential channels. Single-ended channels are unipolar and are left unchanged. Fixes: d1325cf45077 ("Staging: IIO: max1363 ADC driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4 Signed-off-by: Cong Nguyen Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit e6a9ad8ebf038b3f589a2a6c8692e8bfd7b9976c Author: Pengpeng Hou Date: Wed Oct 7 04:38:48 2026 -0400 iio: adc: aspeed: propagate reset deassert errors [ Upstream commit 95e4eb426b4bd666fa2f37886c0ddf74a0cc6167 ] aspeed_adc_probe() continues to register ADC resources after deasserting the shared reset, even if the reset controller reports a failure. A failed deassertion leaves the hardware unavailable, so stop probing before installing the cleanup action and enabling the ADC. Fixes: edf7550a1f93 ("iio: adc: aspeed: Deassert reset in probe") Signed-off-by: Pengpeng Hou Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron [ sashal: Changed the direct error return to a jump to the existing reset_error label. ] Signed-off-by: Sasha Levin commit a182c0bbb3c0332189f04b241a71455539f58433 Author: Felix Fietkau Date: Wed Oct 7 02:24:39 2026 -0400 wifi: mac80211: set info->band for 802.3 encap offload frames [ Upstream commit 4febc02cd02f021f2b6d0768332be643ef14a12d ] Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces. Reported-by: Andrea Pesaresi Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/20260926120216.4054712-1-nbd@nbd.name Signed-off-by: Johannes Berg [ sashal: adapted MLD-aware channel-context handling to unconditional vif.chanctx_conf access with out_free cleanup. ] Signed-off-by: Sasha Levin commit 001c78bc64389cabe4f9015ab3942ec9c3592caa Author: Sean Christopherson Date: Wed Oct 7 03:04:01 2026 -0400 KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted [ Upstream commit 9e06bbb9ade7cdf28d4a3b5b14e5812881c8df85 ] Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information. Fixes: b2ac58f90540 ("KVM/SVM: Allow direct access to MSR_IA32_SPEC_CTRL") Cc: stable@vger.kernel.org Reported-by: Stefan Teodorescu Signed-off-by: Sean Christopherson Message-ID: <20260826195833.844526-1-seanjc@google.com> Signed-off-by: Paolo Bonzini [ sashal: adapted direct svm access to to_svm(vcpu) for the existing helper signature. ] Signed-off-by: Sasha Levin commit 304a3cdd8af43f0eb10d01b671f2ac5157b3a36f Author: Peter Xu Date: Sat Sep 26 10:04:49 2026 +0200 mm/hugetlb: fix avoid_reserve to allow taking folio from subpool commit 58db7c5fbe7daa42098d4965133a864f98ba90ba upstream. Patch series "mm/hugetlb: Refactor hugetlb allocation resv accounting", v2. This is a follow up on Ackerley's series here as replacement: https://lore.kernel.org/r/cover.1728684491.git.ackerleytng@google.com The goal of this series is to cleanup hugetlb resv accounting, especially during folio allocation, to decouple a few things: - Hugetlb folios v.s. Hugetlbfs: IOW, the hope is in the future hugetlb folios can be allocated completely without hugetlbfs. - Decouple VMA v.s. hugetlb folio allocations: allocating a hugetlb folio should not always require a hugetlbfs VMA. For example, either it got allocated from the inode level (see hugetlbfs_fallocate() where it used a pesudo VMA for allocation), or it can be allocated by other kernel subsystems. It paves way for other users to allocate hugetlb folios out of either system reservations, or subpools (instead of hugetlbfs, as a file system). For longer term, this prepares hugetlb as a separate concept versus hugetlbfs, so that hugetlb folios can be allocated by not only hugetlbfs and other things. Tests I've done: - I had a reproducer in patch 1 for the bug I found, this will start to work after patch 1 or the whole set applied. - Hugetlb regression tests (on x86_64 2MBs), includes: - All vmtests on hugetlbfs - libhugetlbfs test suite (which may fail some tests, but no new failures will be introduced by this series, so all such failures happen before this series so shouldn't be relevant). This patch (of 7): Since commit 04f2cbe35699 ("hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed"), avoid_reserve was introduced for a special case of CoW on hugetlb private mappings, and only if the owner VMA is trying to allocate yet another hugetlb folio that is not reserved within the private vma reserved map. Later on, in commit d85f69b0b533 ("mm/hugetlb: alloc_huge_page handle areas hole punched by fallocate"), alloc_huge_page() enforced to not consume any global reservation as long as avoid_reserve=true. This operation doesn't look correct, because even if it will enforce the allocation to not use global reservation at all, it will still try to take one reservation from the spool (if the subpool existed). Then since the spool reserved pages take from global reservation, it'll also take one reservation globally. Logically it can cause global reservation to go wrong. I wrote a reproducer below, trigger this special path, and every run of such program will cause global reservation count to increment by one, until it hits the number of free pages: #define _GNU_SOURCE /* See feature_test_macros(7) */ #include #include #include #include #include #include #define MSIZE (2UL << 20) int main(int argc, char *argv[]) { const char *path; int *buf; int fd, ret; pid_t child; if (argc < 2) { printf("usage: %s \n", argv[0]); return -1; } path = argv[1]; fd = open(path, O_RDWR | O_CREAT, 0666); if (fd < 0) { perror("open failed"); return -1; } ret = fallocate(fd, 0, 0, MSIZE); if (ret != 0) { perror("fallocate"); return -1; } buf = mmap(NULL, MSIZE, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0); if (buf == MAP_FAILED) { perror("mmap() failed"); return -1; } /* Allocate a page */ *buf = 1; child = fork(); if (child == 0) { /* child doesn't need to do anything */ exit(0); } /* Trigger CoW from owner */ *buf = 2; munmap(buf, MSIZE); close(fd); unlink(path); return 0; } It can only reproduce with a sub-mount when there're reserved pages on the spool, like: # sysctl vm.nr_hugepages=128 # mkdir ./hugetlb-pool # mount -t hugetlbfs -o min_size=8M,pagesize=2M none ./hugetlb-pool Then run the reproducer on the mountpoint: # ./reproducer ./hugetlb-pool/test Fix it by taking the reservation from spool if available. In general, avoid_reserve is IMHO more about "avoid vma resv map", not spool's. I copied stable, however I have no intention for backporting if it's not a clean cherry-pick, because private hugetlb mapping, and then fork() on top is too rare to hit. Link: https://lkml.kernel.org/r/20250107204002.2683356-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20250107204002.2683356-2-peterx@redhat.com Fixes: d85f69b0b533 ("mm/hugetlb: alloc_huge_page handle areas hole punched by fallocate") Signed-off-by: Peter Xu Reviewed-by: Ackerley Tng Tested-by: Ackerley Tng Reviewed-by: Oscar Salvador Cc: Breno Leitao Cc: Muchun Song Cc: Naoya Horiguchi Cc: Rik van Riel Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton [ Karl Mehltretter: The upstream changes map directly to this stable tree's older page-based HugeTLB API. The backport retains this stable tree's SetPagePrivate() reserve marker, plain hugetlb_lock calls and direct -ENOSPC return; the functional changes otherwise match upstream. ] Assisted-by: LLM Signed-off-by: Karl Mehltretter Signed-off-by: Sasha Levin commit 3e837269bbfe78a602e0c259d57ffafe7a4df3b2 Author: Matthew Wilcox (Oracle) Date: Tue Jun 23 20:28:48 2026 +0100 fs: Free any excess xarray nodes in clear_inode() [ Upstream commit ee3f011250104129893d8e9599147e457d4d7280 ] For many years we've had a hard to hit leak of xarray nodes. Hugh documented it well in commit 786b31121a2c. Recently people and syzbot have found ways to force it to happen with madvise. Rather than fix the leaks where they happen, just call xa_destroy() which has the side-effect of cycling the i_pages lock. Cc: Rik van Riel Cc: Zi Yan Cc: Jinjiang Tu Cc: Dave Jones Link: https://lore.kernel.org/all/20260121062243.1893129-1-tujinjiang@huawei.com/ Signed-off-by: Matthew Wilcox (Oracle) Link: https://patch.msgid.link/20260623192850.1595958-1-willy@infradead.org Reviewed-by: Rik van Riel Signed-off-by: Christian Brauner (Amutable) Signed-off-by: Sasha Levin commit 4c4671a706d2d85442a30850abfada5377ffbbc8 Author: Zhiling Zou Date: Wed Oct 7 03:12:49 2026 -0400 wifi: mac80211: count only matching reservations in reserved switch [ Upstream commit 437f3727b4fd715266c296435c116288f82666fd ] ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link. Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Link: https://patch.msgid.link/4b6c4b8648ab1920c38a40be32c0b1a2797b4ac6.1785726007.git.zhilinz@nebusec.ai Signed-off-by: Johannes Berg [ sashal: Adapted per-link reservation handling to per-vif sdata helpers and list iteration. ] Signed-off-by: Sasha Levin commit 026ae72fa6d0f7e04951441026be473f22911b87 Author: Zhiling Zou Date: Wed Oct 7 01:27:05 2026 -0400 wifi: mac80211: keep paired old chanctx alive [ Upstream commit 3412e9a800786d1dec4a58367db1cba275e7ef11 ] An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain. Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zhiling Zou Link: https://patch.msgid.link/b9b582b0db3814f641648b8886bb50f9d68f93ac.1785730815.git.zhilinz@nebusec.ai Signed-off-by: Johannes Berg [ sashal: adapted link-based chanctx handling to the older vif-based API ] Signed-off-by: Sasha Levin commit a78910f6d78cc1415cbc9b4fb621c3f4f6945be2 Author: Johan Hovold Date: Thu Oct 8 22:17:23 2026 +0800 tty: port: fix tty_port_tty_vhangup() race [ Upstream commit b48820de8c1a596c5b99775524dfce73c6576c5d ] Drivers rely on tty_port_tty_vhangup() to synchronously hang up their ports before tearing down resources as part of deregistration (e.g. on physical disconnect). If tty_port_tty_vhangup() races with another hangup it may however return before the port has been shut down. This is in turn can lead to use-after-free and NULL-pointer dereferences in racing ioctls (including a synchronous hangup) and in processing of racing asynchronous hangups (carrier loss). Add the missing serialisation to tty_port_tty_vhangup() and tty_port_hangup() so that the former does not return until the port has been shut down also when there is a racing hangup. Note that serial core does not use tty_port_hangup(), but it already holds the port mutex when clearing port->tty and shutting down the port in uart_hangup(). Fixes: 7ca0ff9ab321 ("tty: Add a full port_close function") Cc: stable@kernel.org # 2.6.32: 2b5eac0f8c6e: tty: introduce and use tty_port_tty_vhangup() helper Cc: stable@kernel.org # 2.6.32 Reported-by: syzbot+5fabc1ae99ff40690d84@syzkaller.appspotmail.com Link: https://lore.kernel.org/6a944641.4d659fcc.734b4.003c.GAE@google.com Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260910125114.640880-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman [ Ting-Han: use mutex_lock()/spin_lock_irqsave() instead of guard(), scoped_guard() and the tty_port_tty class, matching the existing code in this version of tty_port.c; tty_port_shutdown() has no kernel-doc here, so there is none to move ] Assisted-by: LLM Signed-off-by: Ting-Han Hou Signed-off-by: Sasha Levin commit c94217a548dba1c9ea48fa851692431c8d37a85f Author: Jiri Slaby (SUSE) Date: Thu Oct 8 22:17:22 2026 +0800 tty: introduce and use tty_port_tty_vhangup() helper [ Upstream commit 2b5eac0f8c6e79bc152c8804f9f88d16717013ab ] This code (tty_get -> vhangup -> tty_put) is repeated on few places. Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to handle even vhangup (synchronous). And use it on those places. In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup() depending on a new bool parameter. Signed-off-by: "Jiri Slaby (SUSE)" Cc: Karsten Keil Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Oliver Neukum Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman [ Ting-Han: adjust context in uart_remove_one_port(), which is still called that and keeps its "ret" variable in this version; the tty_port prototypes live in include/linux/tty.h here, so add the inline helpers there instead of include/linux/tty_port.h ] Assisted-by: LLM Signed-off-by: Ting-Han Hou Signed-off-by: Sasha Levin commit 0f347e00d060dc0bf3b2d0ee041206e54848c233 Author: Eric Dumazet Date: Fri Oct 9 09:30:03 2026 -0400 bnxt_en: fix DMA mapping length for padded small packets [ Upstream commit a51d233ccd4889aadb71dace863525cc2b00271e ] Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Cc: stable@vger.kernel.org Reported-by: Stefan Fleischmann Closes: https://lore.kernel.org/netdev/20261004122616.56714cbd@nargothrond/ Signed-off-by: Eric Dumazet Reviewed-by: Michael Chan Link: https://patch.msgid.link/20261007051747.455273-1-edumazet@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 991904982827f07706c643bb0428c4b689b254e3 Author: Johan Hovold Date: Tue Oct 6 18:10:37 2026 -0400 USB: serial: fix driver deregistration order [ Upstream commit 646e5b28b4fdbc1b828a2398d6ced2c1dd308a46 ] USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered. Fixes: 765e0ba62613 ("usb-serial: new API for driver registration") Cc: stable@vger.kernel.org # 3.4 Cc: Alan Stern Signed-off-by: Johan Hovold Signed-off-by: Sasha Levin commit 11687bf360c71f46e5829ed3d45c4412870f50e8 Author: Johan Hovold Date: Tue Oct 6 18:10:36 2026 -0400 USB: serial: clean up core error labels [ Upstream commit 96a83c95c3da5ba55ea2cf6ce87de10fc03417a9 ] Clean up the core error labels by consistently naming them after what they do rather than after from where they are jumped to. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Stable-dep-of: 646e5b28b4fd ("USB: serial: fix driver deregistration order") Signed-off-by: Sasha Levin commit 0e79c9d260862bd4676955d3cac7baa0d38a5b2e Author: Zhao Li Date: Tue Oct 6 18:56:28 2026 -0400 wifi: mac80211: account proxy paths against the mesh path limit [ Upstream commit a5f35d4b112af1415ff06bd501c8cc26cc08aa8b ] Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit. Fixes: ece1a2e7e860 ("mac80211: Remove mesh paths when an interface is removed") Cc: stable@vger.kernel.org Assisted-by: LLM sparse kasan Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260916113649.28315-3-enderaoelyther@gmail.com Signed-off-by: Johannes Berg [ sashal: adapted error handling to the absence of mesh_fast_tx_flush_addr() ] Signed-off-by: Sasha Levin commit 91fd4168572696c0b18070b274dd342da2326ddd Author: Han Xu Date: Tue Oct 6 19:25:16 2026 -0400 mtd: spinand: Enable QE on all dies [ Upstream commit 63d6cace2c4a7f36c1cb44f1bb5e0f3ef19e5c7f ] The QUAD ENABLE (QE) bit is stored in a per-die configuration register on some SPI-NAND devices. When a device contains multiple dies, updating the QE bit only on the currently selected die can leave the remaining dies operating in non-quad mode.   Iterate over all targets and update the QE setting on each die during initialization to ensure consistent quad I/O operation across the entire device. Tested on ISSI IS38SMW04G8B. Fixes: 7529df465248 ("mtd: nand: Add core infrastructure to support SPI NANDs") Cc: stable@vger.kernel.org Signed-off-by: Han Xu Signed-off-by: Miquel Raynal [ sashal: retained local enable detection in spinand_init_quad_enable() instead of using an enable parameter. ] Signed-off-by: Sasha Levin commit c8004de07739fa9a39e310e859384f1458d7d076 Author: Pei Xiao Date: Tue Oct 6 17:32:31 2026 -0400 mtd: block2mtd: Fix divide error when erase_size is zero [ Upstream commit b5965c4221165045e19736794ca5f48ae3d67142 ] The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device. Fixes: ea6d833a3fdd ("mtd: block2mtd: check device size") Reported-by: syzbot+b320a4d5f65a61dbbf89@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/6a7b58ba.ac361c09.22ff0a.0045.GAE@google.com/ Suggested-by: Jörn Engel Cc: stable@vger.kernel.org Signed-off-by: Pei Xiao Signed-off-by: Miquel Raynal [ sashal: adapted the size variable check to use dev->blkdev->bd_inode->i_size directly ] Signed-off-by: Sasha Levin commit c7ef25e96dc3f808eb891bbbd43b6a682846eb0c Author: Johan Hovold Date: Tue Oct 6 19:26:47 2026 -0400 USB: serial: fix ioctl hangup race [ Upstream commit ae0e61d95677efa778379853e495d748e6efbf95 ] The tty ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Serialise the callbacks using the tty port mutex and add the missing checks to make sure the port has not been hung up before accessing port driver data or hardware. This specifically avoids dereferencing a NULL-pointer if a device is disconnected during lengthy break signalling. Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or hardware and are therefore not affected by the race. Fixes: f34d7a5b7010 ("tty: The big operations rework") Reported-by: Nick Bowler Link: https://lore.kernel.org/all/CADyTPExB2kYOOwkO0JqGhKaYVDqO9uS9WCw0J=MCTdVhcGOogA@mail.gmail.com/ Reported-by: syzbot+473d7477c523b41d4046@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/6a9087a4.4d659fcc.734b4.0013.GAE@google.com Cc: stable@vger.kernel.org # 2.6.26 Signed-off-by: Johan Hovold [ sashal: adapted locking to the older USB-serial callback interfaces. ] Signed-off-by: Sasha Levin commit 94358146389d985b809898cc23b1030ff240a25d Author: Mika Westerberg Date: Tue Oct 6 19:12:38 2026 -0400 thunderbolt: Fix KASAN reported use-after-free when request is canceled [ Upstream commit a02188ddc24b7872f0c5e0c5873f827318717803 ] Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Freed by task 926: kfree+0x18f/0x4a0 tb_cfg_request_put+0xb7/0xe0 [thunderbolt] tb_cfg_request_work+0x82/0x120 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 Second to last potentially related work creation: __queue_work+0x575/0xd00 queue_work_on+0x77/0x80 tb_cfg_request_cancel+0xc7/0x260 [thunderbolt] tb_cfg_request_sync+0x1f6/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 The last stack trace is helpful because it shows that we are cancelling a request and looking at tb_cfg_request_cancel() what might happen is that tb_cfg_request_work() completes right before tb_cfg_request_cancel() starts and because of this it will call schedule_work() queueing the same work to run again. However, it is already removed from the request_queue and reference count is dropped so when tb_cfg_request_work() triggers again it will access memory that is already released. Fix this so that we first make sure a cancelled request is not handed away from tb_cfg_request_find() or scheduled to run. Then instead of relying on the worker to clean up the request we will do it in tb_cfg_request_cancel() after the work is canceled from running. Make tb_cfg_request_dequeue() release the request only if it was actually removed from the queue. Reported-by: Alan Borzeszkowski Fixes: d7f781bfdbf4 ("thunderbolt: Rework control channel to be more reliable") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg [ sashal: replaced scoped mutex guards with explicit mutex_lock()/mutex_unlock() calls ] Signed-off-by: Sasha Levin commit 409da4ad76d921b173ebb801e316023f74564239 Author: Zhao Li Date: Tue Oct 6 18:12:21 2026 -0400 wifi: mac80211: keep fallback association elements alive [ Upstream commit a10a2f80476d166fd81c361ec0319493671b694e ] Associating to a non-transmitted MBSSID profile reads freed memory while determining the operating channel and applying HT capabilities. When an association response omits WMM, HT, or VHT information, ieee80211_assoc_config_link() parses the cached BSS IEs and copies the missing element pointers out of that fallback parse. For a non-transmitted MBSSID profile those pointers refer to merged-profile storage owned by the parse object, and the fallback block frees that object at its end. The copied pointers are used afterwards to determine the operating channel, configure bandwidth, and apply HT capabilities. Keep the fallback parse result alive until association setup finishes. Fixes: 5023b14cf4df ("mac80211: support profile split between elements") Cc: stable@kernel.org Assisted-by: LLM sparse kasan [reorder variable declaration] Signed-off-by: Zhao Li Signed-off-by: Johannes Berg [ sashal: changed kfree(bss_elems) to kfree(bss_elems.nontx_profile) for the stack-allocated parse structure. ] Signed-off-by: Sasha Levin commit 0c7dd79fb760b8461ea1092964b2102cfced5264 Author: Timur Kristóf Date: Mon Oct 5 10:41:08 2026 -0400 drm/amd/display: Mark DCE 6.4 as not APU [ Upstream commit 3a52d587d1fc8e8bf94ba1b07374f7ec91aaffb4 ] DCE 6.4 is found in Oland chips, which were advertised as low-end gaming GPUs in 2013~2015 and then have been sold as low-end workstation GPUs until 2017~2019. These are not APUs. Fixes: 7c15fd86aaec ("drm/amd/display: dc/dce: add initial DCE6 support (v10)") Signed-off-by: Timur Kristóf Reviewed-by: Mario Limonciello Link: https://patch.msgid.link/20260923122033.1046651-3-timur.kristof@gmail.com Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher (cherry picked from commit 1072aa811ea1e61d5f763e4ec1bc6d24bb61f14a) Cc: stable@vger.kernel.org [ sashal: adjusted context in dce64_construct() due to missing debug and check_config initializations ] Signed-off-by: Sasha Levin commit e3b51b5be36ebcbc2e73071670a1522f06d6f54b Author: Johan Hovold Date: Tue Oct 6 04:08:21 2026 -0400 serial: fix TIOCMIWAIT race [ Upstream commit 40adffec8c0090533dfaa863ced7901b60bbf1dc ] The task state must be updated before checking the wakeup condition to avoid missing a racing modem status update. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: sashiko-bot@kernel.org Link: https://lore.kernel.org/r/20260904115542.E20D11F00A3D@smtp.kernel.org Cc: stable@kernel.org Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260910130816.642699-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman [ sashal: adjusted context for spin_lock_irq()/spin_unlock_irq() instead of uart_port_lock_irq()/uart_port_unlock_irq() ] Signed-off-by: Sasha Levin commit 9429a2b92d449031f4824487d80c4c3d7e5fa058 Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon Oct 5 17:48:03 2026 -0400 tty: vt: fix memory leak in vc_allocate() [ Upstream commit 5b114bfc1dfd88f9d50822d532f7f1fce0f7388a ] If the screen buffer allocation fails in vc_allocate(), the error handling path jumps to `err_free`. However, this path fails to release the unicode screen map attached to `vc->uni_pagedict_loc`. During the early stages of vc_allocate(), the unicode screen map is either newly allocated via con_set_default_unimap() or shares the default unicode map from a previously initialized console (which increments its refcount). If the subsequent kzalloc() for the screen buffer fails, the err_free path frees the vc structure but leaves the attached uni_pagedict with an elevated refcount. This results in an unreferenced object memory leak, as the reference to the dictionary is lost and its refcount can never reach zero. This issue was discovered by DevGen (an automated virtual device modeling fuzzer based on Syzkaller). During fuzzing with kernel fault injection (failslab) enabled, the fuzzer forcefully failed the kzalloc() for the screen buffer, exposing this error-handling path leak. Fix this by checking *vc->uni_pagedict_loc and calling con_free_unimap(vc) in the err_free path before kfree(vc). This safely decrements the refcount and releases the dictionary memory if this was the last reference. The explicit check is added to maintain consistency with other callers. Fixes: 34902b7f2754 ("tty: vt, get rid of weird source code flow") Cc: stable Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Link: https://patch.msgid.link/20260803144556.163856-1-25181214217@stu.xidian.edu.cn Signed-off-by: Greg Kroah-Hartman [ sashal: Replaced uni_pagedict_loc with the existing vc_uni_pagedir_loc field name. ] Signed-off-by: Sasha Levin commit b57a21bb8a72235df99249f046a578e49d5c8b97 Author: David Heidelberg Date: Mon Oct 5 17:12:53 2026 -0400 Input: s6sy761 - fix resume ordering and restore sensing [ Upstream commit a215720959c5450b3699e243904b39c3f8f68888 ] System suspend powers the controller off and resume powers it back on, but the resume path enables the interrupt before s6sy761_power_on() checks the boot. The firmware raises its boot-complete event on the interrupt line, the threaded handler consumes it, s6sy761_power_on() then reads an empty event and resume fails with -ENODEV, skipping the touch function setup: s6sy761 2-0048: PM: dpm_run_callback(): s6sy761_resume [s6sy761] returns -19 Power the chip on first and only then unmask the interrupt. Once resume completes the boot handshake the chip comes back with sensing off, as at probe where input_open() turns it on, so the touchscreen stays dead after resume. Send SENSE_ON again when the input device is open. Tested on a Pixel 3 XL over several s2idle cycles: resume succeeds and the touch function and sense status match the pre-suspend state. Assisted-by: LLM Cc: stable@vger.kernel.org Fixes: 0145a7141e59 ("Input: add support for the Samsung S6SY761 touchscreen") Signed-off-by: David Heidelberg Link: https://patch.msgid.link/20260926-s6sy761-suspend-v2-1-8f00a96ee6e8@ixit.cz Signed-off-by: Dmitry Torokhov [ sashal: Replaced the guarded input_device_enabled() check with sdata->input->users under explicit mutex locking. ] Signed-off-by: Sasha Levin commit d1187a7deac1e90182372a188dfe33ddd2b53cba Author: Fan Wu Date: Mon Oct 5 18:33:44 2026 -0400 tty: serial: max3100: shut down timer before freeing port [ Upstream commit db0949bbd06db0a75b4b1076f1e25194be7d956a ] max3100_shutdown() stops the polling timer but returns early during system suspend. If the SPI device is unbound before resume, the serial core does not call max3100_shutdown() again, so max3100_remove() frees the port while the timer remains armed. max3100_timeout() may then access the freed port and re-arm the timer. Add final timer teardown to max3100_remove() and use timer_shutdown_sync() to prevent a racing callback from re-arming it. Also free the IRQ and destroy the workqueue there before freeing the port. Keep timer_delete_sync() in max3100_shutdown() so that a subsequent open() can re-arm the timer. The workqueue is created before request_irq() and destroyed on both request_irq() failure and normal shutdown. Its presence at remove thus identifies the IRQ left registered when suspend bypasses shutdown. Free the IRQ before destroying the workqueue, in both max3100_shutdown() and max3100_remove(), and cancel the pending work in between. free_irq() waits for a running interrupt handler to finish and no new handler can start afterwards, so a racing handler cannot queue work on a workqueue that is being destroyed; the force_end_work check in max3100_dowork() only narrows that window, as a handler delayed between the check and queue_work() could still run after the teardown has cleared the workqueue pointer. Cancelling the work also keeps destroy_workqueue() from waiting on a queued work item in case remove() ever runs while the freezable workqueue is still frozen, e.g. device removal during the resume window, before workqueues are thawed. This issue was found by an in-house static analysis tool. Fixes: 7831d56b0a35 ("tty: MAX3100") Cc: stable@kernel.org # 6.2+ Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260927055957.561030-1-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman [ sashal: Replaced unavailable timer_shutdown_sync() with timer_delete_sync(). ] Signed-off-by: Sasha Levin commit 70fa2bec352d9f949b882af3c380b916e4a29a43 Author: Johan Hovold Date: Mon Oct 5 16:39:42 2026 -0400 tty: abort break signalling on hangup [ Upstream commit 845a2737e0f5ffe5ca8d38de556012b0c9472cdd ] The break ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Drivers must handle this race, but TCSBRK and TCSBRKP should still be aborted to avoid calling back into the driver after a user-controlled timeout (possibly even after the tty has been reopened). Note that drivers should disable any break state on shutdown so just return on hangup (calling break_ctl() again is racy and will most likely fail for drivers handling the race). Fixes: f34d7a5b7010 ("tty: The big operations rework") Cc: stable Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260903163736.1499280-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman [ sashal: Adjusted hangup context to use the existing tty->ctrl_lock instead of tty->ctrl.lock. ] Signed-off-by: Sasha Levin commit 761e8c5eb13d1b5e196b0b39bdfed6fc67af9dd2 Author: Johan Hovold Date: Mon Oct 5 17:21:45 2026 -0400 tty: tty_port: restore TTY_IO_ERROR on activation failure [ Upstream commit 56964f6a31238fb41d5830bb42520c5b10ff7d8f ] Make sure to restore the TTY_IO_ERROR flag if activation fails to prevent I/O attempts on a port that is gone or powered down. This specifically avoids issues like kernel panic due to unclocked accesses or NULL-pointer dereferences when accessing powered down or deregistered ports when a TTY ioctl races with hangup and open. Note that the flag is set again in tty_port_close() but not restoring it on activation failure leaves a window where drivers fail to handle the ioctl-hangup race. Fixes: a9a37ec33a1b ("tty: tty_port: Move the IO_ERROR clear") Cc: stable # 2.6.33 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260908084000.218528-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman [ sashal: adapted to the existing braced error block containing mutex_unlock() ] Signed-off-by: Sasha Levin commit 8e304b598772591496179c4fa67e748999893580 Author: Pannarat Wiriyaarritham Date: Mon Oct 5 17:54:54 2026 -0400 usb: typec: ucsi: acpi: Assume UCSI 1.2 on Acer Nitro ANV15-41 [ Upstream commit 8c51ea651d043c786c37668c51624bd6b338a0ef ] The Acer Nitro ANV15-41 exposes a functional UCSI ACPI PPM but reports a UCSI VERSION value of zero. ucsi_register() rejects a zero version with -ENODEV, leaving the system without registered USB Type-C connectors. The PPM works correctly when using the UCSI 1.2 layout. With UCSI 1.2 assumed, both Type-C connectors register correctly and USB Power Delivery negotiation works. Add a DMI-specific UCSI operation for the Acer Nitro ANV15-41 that substitutes UCSI 1.2 only when firmware reports a zero version. Preserve any valid non-zero firmware version. Tested on an Acer Nitro ANV15-41 with BIOS V1.51. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: stable Assisted-by: LLM Signed-off-by: Pannarat Wiriyaarritham Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260910023338.31816-1-pannarat.wiriyaarritham@danielcorp.dev Signed-off-by: Greg Kroah-Hartman [ sashal: Replaced the dedicated read_version callback with a DMI-gated check in ucsi_acpi_read(). ] Signed-off-by: Sasha Levin commit a980a250de22bb4a487e935176d5f7a6b81f9a02 Author: Fan Wu Date: Mon Oct 5 12:24:59 2026 -0400 usb: cdns3: fix use-after-free in cdns3_gadget_exit() [ Upstream commit ebe9b68c396792c15d0ac690d592e449e74ed804 ] cdns3_gadget_start() arms two works on system_freezable_wq: pending_status_wq for the deferred ep0 status stage and aligned_buf_wq for realigned request buffers. Both handlers use the cdns3_device the works are embedded in, and cdns3_pending_setup_status_handler() also calls the ep0 request completion. cdns3_gadget_exit() does not wait for these works. It frees all endpoints and aligned buffers and drops the last reference to the gadget device, which frees priv_dev, so a work queued before the exit can run after the free. Fix this by waiting for both works after the gadget driver is unbound and the IRQ is freed, when no new work can be queued, and before the endpoints and buffers are released. This issue was found by an in-house static analysis tool. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Reported-by: Sicong Huang Closes: https://lore.kernel.org/linux-usb/7f5719b.8700.18f67b324d3.Coremail.congei42@163.com/ Suggested-by: Sicong Huang Assisted-by: Codex:gpt-5.6 Co-developed-by: Song Li Signed-off-by: Song Li Signed-off-by: Fan Wu Acked-by: Peter Chen Link: https://patch.msgid.link/20260909095655.694527-1-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit d993649baca8d9d12bdd79f61db9e40773ff06aa Author: Myeonghun Pak Date: Mon Oct 5 12:18:14 2026 -0400 usb: ohci-spear: disable controller wakeup on removal [ Upstream commit b1b0f8bdbbc891a4ee7f3b1a878c633e02b7bbeb ] Probe enables controller wakeup after the OHCI core marks controllers with RemoteWakeupConnected as wakeup-capable. Removal does not undo this, so the wakeup source can remain attached after driver unbind. Disable controller wakeup after removing the HCD. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: a6eeeb9f45b5 ("USB: Update USB default wakeup settings") Cc: stable Assisted-by: LLM Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Acked-by: Alan Stern Link: https://patch.msgid.link/20260915012011.61874-4-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 001656913dfb2d344897c6093bd9cefb9aa0b637 Author: Chen Ni Date: Mon Oct 5 12:18:13 2026 -0400 usb: ohci-spear: Remove unnecessary NULL check before clk_disable_unprepare() [ Upstream commit a891b9aebcc7406fe2f439d184bac3948fb08645 ] clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL. Remove unneeded NULL check for clk here. Signed-off-by: Chen Ni Acked-by: Alan Stern Link: https://lore.kernel.org/r/20250617042050.1930940-1-nichen@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman Stable-dep-of: b1b0f8bdbbc8 ("usb: ohci-spear: disable controller wakeup on removal") Signed-off-by: Sasha Levin commit beaf5385bb3f0b1152c5b3b604ff6c2734d984fe Author: Orgad Shaneh Date: Mon Oct 5 10:10:36 2026 -0400 usb: octeon-hcd: fix the FIFO-flush timeout computation [ Upstream commit 4c7a1b9f1f1979f2b3b69428ada12680695159c2 ] cvmx_wait_tx_rx() computes its 100us deadline from (u64)octeon_get_clock_rate - the address of the function, not its return value; the parentheses have been missing since the CVMX_WAIT_FOR_FIELD32 macro became a function. The cast makes it compile silently, and the resulting deadline is effectively infinite. On a healthy controller the flush bit clears on the first read and nothing is noticed. On a controller whose PHY did not come up (for example when the reference-clock configuration is wrong for the board), txfflsh/rxfflsh never clear and probe spins forever in __delay() - observed as a hard hang with a soft-lockup splat on a CN5020 board, where the board watchdog then resets the system with no console output. Call the function, restoring the 100us timeout the code always intended. Fixes: 3e195a80e096 ("Staging: octeon-usb: Replaces CVMX_WAIT_FOR_FIELD32 macro with a function") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-5 Signed-off-by: Orgad Shaneh Link: https://patch.msgid.link/20260901193100.1352110-1-orgads@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 59bdbbb70be95100aab3a3a3f4017861c0bbef8c Author: Willian Oliveira Date: Mon Oct 5 10:57:08 2026 -0400 drm/amdgpu/gfx6: fix firmware leak on teardown [ Upstream commit cc172e177795c5f87bc2d71768d077e1c10633e8 ] The firmware requested in gfx_v6_0_init_microcode() is not released when the GFX block is torn down, leaking the firmware resources. Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini() to release the PFP, ME, CE and RLC firmware. Signed-off-by: Willian Oliveira Signed-off-by: Alex Deucher (cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924) Cc: stable@vger.kernel.org [ sashal: Replaced unavailable amdgpu_ucode_release() calls with inline release_firmware() calls and NULL assignments. ] Signed-off-by: Sasha Levin commit 385ad314f1c096aae71fff516214bb312a6047fb Author: Guangshuo Li Date: Mon Oct 5 10:30:12 2026 -0400 drm/amdgpu: fix ACP MFD device leak on init failure [ Upstream commit f0013046151b7467e62c471c1c83d63ea255799c ] acp_hw_init() registers ACP child devices with mfd_add_devices() before attaching them to the ACP power domain and initializing the hardware. If attaching a child to the power domain fails, or if the ACP reset or clock enable operation times out, the failure path frees only the source cell, resource, and platform-data allocations. The child platform devices already registered by mfd_add_devices() remain registered and are never released. Remove the children from the power domain and unregister the MFD devices on failures that occur after mfd_add_devices() succeeds. Keep mfd_add_devices() failures on the existing cleanup path since the MFD core already rolls back partially registered children itself. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fixes: 25030321ba28 ("drm/amd: add pm domain for ACP IP sub blocks") Signed-off-by: Guangshuo Li Signed-off-by: Alex Deucher (cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) Cc: stable@vger.kernel.org [ sashal: adapted the error-path changes to the single device_for_each_child() call in acp_hw_init(). ] Signed-off-by: Sasha Levin commit 0ef8ad609d1b26973904cc25b13f1c6abde63f36 Author: Francisco Beltrán Millalén Date: Mon Oct 5 11:02:01 2026 -0400 drm/amdgpu: reset VI ASIC on MacBookPro14,3 [ Upstream commit a22e5e4f2ebbdbb962cc3233094d189c4dfaa051 ] On a MacBookPro14,3 with a Radeon Pro 555 (Polaris11), the framebuffer is at MC address 0 when amdgpu loads after a cold boot, as the firmware leaves it (MC_VM_FB_LOCATION = 0x007f0000), while the VBIOS ASIC_Init table places it at 0xF4_0000_0000 (0xf47ff400). amdgpu reads the location once, at init, so after a re-POST (S3 resume or GPU reset) the framebuffer has moved and the driver keeps programming the old one: the SMU is handed a table that was never written and the GPU does not come back, which leaves the internal panel black. Resetting the ASIC on load makes ASIC_Init run before the driver reads the location, so the driver uses the VBIOS placement from the start and every later re-POST puts the framebuffer back where it already is. Add the Radeon Pro 555 used in this machine to the existing VI reset quirk table. Tested on a MacBookPro14,3 on 6.18.49 with the quirk table backported (the kernel also carries unrelated local PCI and ACPI patches for this machine). The framebuffer is at 0x000000F400000000 after both cold and warm boot, and the GPU survived 9 S3 cycles (lid close and rtcwake, one of them with the lid closed for about 7.5 minutes and a USB-C disk attached), each followed by a few minutes of 3D load; no ring timeouts or VM faults were reported. The reset adds about 0.23 s to amdgpu init. Suggested-by: Christian König Suggested-by: Alex Deucher Link: https://lore.kernel.org/all/20260924132952.25054-1-fbeltranmillalen@gmail.com/ Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Francisco Beltrán Millalén Signed-off-by: Alex Deucher (cherry picked from commit b6b1d97218518003107d4446fac278fa3e0a19a0) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit b0e77d95d78e764364fd7e994d0354c392302ab0 Author: Andre Eikmeyer Date: Mon Oct 5 11:02:00 2026 -0400 drm/amdgpu: reset VI ASIC on MacBookPro15,1 [ Upstream commit a5be7ad8f5f0e067613e9197638f216f46252946 ] After S3, reloading amdgpu on MacBookPro15,1 systems with a Radeon Pro 555X or 560X fails while loading the SMU firmware. The existing SMC register check does not request a reset because the registers do not reliably reflect the stale SMU state on these machines. Frederick Morlock found that forcing a VI ASIC reset allows the driver to initialize again. This patch limits his workaround to the exact PCI device, Apple subsystem device and revision combinations used by these two GPUs, leaving other VI hardware unchanged. Suggested-by: Frederick Morlock Signed-off-by: Andre Eikmeyer Signed-off-by: Alex Deucher Stable-dep-of: a22e5e4f2ebb ("drm/amdgpu: reset VI ASIC on MacBookPro14,3") Signed-off-by: Sasha Levin commit e0b6bf1697c4fe7574a2e31684626cc251ac44df Author: Timur Kristóf Date: Mon Oct 5 09:49:12 2026 -0400 drm/amd/pm/si: Fix updating clock limits on AC/DC [ Upstream commit 08c9100f65299c64439e22e6057d750ae0e6c660 ] Assume that the AC limits are the maximum of all power states, and the DC limits are the maximum of battery power states. This shouldn't make any difference in practice, but is cleaner and more robust against bogus information in the VBIOS. Fixes: e6c5d36756e7 ("drm/amd/pm/si: Fix updating clock limits from power states") Signed-off-by: Timur Kristóf Reviewed-by: Mario Limonciello Link: https://patch.msgid.link/20260923120354.1027996-2-timur.kristof@gmail.com Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher (cherry picked from commit ef8cb9dcc7db7b7abcbdbe870a080cc81e4f0bf3) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 4f48483715ccd8e28dbd5a2f6209877a9129f7fb Author: Eric Biggers Date: Tue Oct 6 23:58:53 2026 +0200 fsverity: add dependency on 64K or smaller pages commit a300000233a9ff842e2fb450fb9a79f7827a586d upstream. Currently, all filesystems that support fsverity (ext4, f2fs, and btrfs) cache the Merkle tree in the pagecache at a 64K aligned offset after the end of the file data. This offset needs to be a multiple of the page size, which is guaranteed only when the page size is 64K or smaller. 64K was chosen to be the "largest reasonable page size". But it isn't the largest *possible* page size: the hexagon and powerpc ports of Linux support 256K pages, though that configuration is rarely used. For now, just disable support for FS_VERITY in these odd configurations to ensure it isn't used in cases where it would have incorrect behavior. Fixes: 671e67b47e9f ("fs-verity: add Kconfig and the helper functions for hashing") Reported-by: Christoph Hellwig Closes: https://lore.kernel.org/r/20260119063349.GA643@lst.de Reviewed-by: Theodore Ts'o Link: https://lore.kernel.org/r/20260221204525.30426-1-ebiggers@kernel.org Signed-off-by: Eric Biggers Signed-off-by: Sasha Levin commit 00ef8d9b686b64d149e92ace86217e642fd65987 Author: Beata Michalska Date: Tue Oct 6 13:54:36 2026 +0200 arm64: errata: Add Cortex-A725 erratum 3821522 workaround [ Upstream commit 45f7304679875eb000d67e194090ee7abd05c89c ] Cortex-A725 erratum 3821522 affects the CNT_CYCLES event, which can incur a significant increment error when a CPU enters and subsequently exits WFE or WFI, and may no longer track the system counter frequency. The AMEVCNTR01_EL0 counter is used as the AMU constant counter for frequency invariance and CPPC FFH feedback counters. Wire the affected Cortex-A725 range into the shared broken AMU constant-counter capability so the affected counter is treated as unavailable by returning zero in the AMU counter paths. This prevents the broken counter from being used as a reference source. The erratum can also affect PMUv3 users of the CNT_CYCLES event, but this workaround intentionally does not change PMU event handling. Hiding or rejecting the PMU event from the erratum code would change the perf-visible PMU event interface, including raw event selection, and would need a separate PMU-specific approach rather than being folded into the AMU reference-counter workaround. Cc: stable@vger.kernel.org Signed-off-by: Beata Michalska Reviewed-by: Vladimir Murzin Signed-off-by: Will Deacon [ Beata: Drop the changes to CPPC/FFH support as those are not available here. ] Signed-off-by: Beata Michalska Signed-off-by: Sasha Levin commit a9e86a72afda7e34d55361887551e53af9c43f13 Author: Beata Michalska Date: Tue Oct 6 13:54:35 2026 +0200 arm64: errata: Factor out broken AMU const counter cap [ Upstream commit 573371caf7aea8582212da81dcead2c3f48fac4b ] Move the workaround from the erratum 2457168-specific cpucap to a generic broken AMU constant-counter one. This keeps the existing Cortex-A510 handling unchanged while allowing other errata with similar AMU constant counter issue to share the capability bit and call sites. Signed-off-by: Beata Michalska Reviewed-by: Vladimir Murzin Signed-off-by: Will Deacon Dropped changes related to CPPC/FFH as support for that is not available here. Additionally renamed define for WORKAROUND_2457168 to new one, WORKAROUND_BROKEN_AMU_CONSTCNT to reuse it as this kernel still relies on the cpucaps header file for the workaround/errata ids. [ Beata: Dropped changes related to CPPC/FFH as support for that is not available here. Additionally renamed define for WORKAROUND_2457168 to new one, WORKAROUND_BROKEN_AMU_CONSTCNT to reuse it as this kernel still relies on the cpucaps header file for the workaround/errata ids. ] Signed-off-by: Beata Michalska Signed-off-by: Sasha Levin commit 14e178c60ba1cea49186fcfccac93d66aa94e9e0 Author: Kyle Zeng Date: Mon Oct 5 20:30:26 2026 -0400 ALSA: seq: Serialize compat port-info ioctls [ Upstream commit 95b2e0361c88753afa030c10698be0a1a5b67650 ] The native sequencer ioctl path serializes handler calls with client->ioctl_mutex, but the translated port-info compat path invokes the same handlers through snd_seq_kernel_client_ctl() without taking that mutex. This lets concurrent compat CREATE_PORT requests pass the port-count check before any request reaches the serialized insertion. The computed integer port index can then exceed the address field range and wrap to an existing index. Subsequent subscriber teardown can resolve the duplicate address to the wrong port and access a freed subscriber. Take ioctl_mutex while dispatching converted port-info requests, matching the native ioctl path. All translated port-info commands share this helper, so their accesses to the client port state are serialized as well. Fixes: b3defb791b26 ("ALSA: seq: Make ioctls race-free") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6-sol gpt-6-astra Signed-off-by: Kyle Zeng Signed-off-by: Bruno Produit Link: https://patch.msgid.link/20260917105643.90102-1-bruno.produit@trailofbits.com Signed-off-by: Takashi Iwai [ sashal: Replaced scoped_guard() with explicit mutex_lock() and mutex_unlock() for GNU89 compatibility. ] Signed-off-by: Sasha Levin commit 4d8fc6290d14aa9e4c3b620fe3e5dc8ba3bea7e3 Author: Zhengchuan Liang Date: Tue Oct 6 04:42:45 2026 -0400 perf: Require kernel access for text poke events [ Upstream commit 357e8a77a501d96c9517f01f4a211eed5e9c9184 ] Perf events with exclude_kernel=1 can be opened without kernel perf access. However, exclude_kernel does not suppress text-poke sideband records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL and contains a raw kernel instruction address. An unprivileged task can therefore open and mmap a task-local software event with text_poke=1. Both opening a count-only tracepoint event and configuring UDP GRO for ESP-in-UDP cause updates to inline static calls; the observer receives the relocated addresses of the modified instructions. For a known kernel image, any such address reveals the runtime kernel text base despite KASLR. Call perf_allow_kernel() whenever attr.text_poke is set, regardless of exclude_kernel. Events that neither monitor kernel execution nor request text-poke records retain their existing permissions. Fixes: e17d43b93e54 ("perf: Add perf text poke event") Assisted-by: LLM Signed-off-by: Zhengchuan Liang Signed-off-by: Peter Zijlstra (Intel) Cc: stable@vger.kernel.org Link: https://patch.msgid.link/99131354c41e23188f778b92f90363775b482395.1790573390.git.zcliangcn@gmail.com [ sashal: Adapted the condition to the existing exclude_kernel check without callchain checks. ] Signed-off-by: Sasha Levin commit 15ddaf908a8eee14e1872ff9c4cdb73562634e7e Author: Johan Hovold Date: Mon Oct 5 18:17:25 2026 -0400 tty: fix saved termios reset race [ Upstream commit 8df07fe93573e9e548d6645273e9bcb6eb74059e ] Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is reset on registration and only set it for drivers that make sure that the minor number is no longer in use. Fixes: 93857edd9829 ("tty: reset termios state on device registration") Reported-by: Chengfeng Ye Link: https://lore.kernel.org/20260926184154.3017929-1-nicoyip.dev@gmail.com Cc: stable@kernel.org # 4.12 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260930131845.1809256-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman [ sashal: Adapted the new flag to existing driver->flags assignments and hexadecimal #define conventions. ] Signed-off-by: Sasha Levin commit 09bccac07a3d1fffaf0cb542ed6a58877b651fdb Author: Viken Dadhaniya Date: Mon Oct 5 10:10:27 2026 -0400 soc: qcom: geni-se: Correct QUP Core ICC vote constants [ Upstream commit 1cd9b1be5a9c56fd69e3f555b200a1844f9b873e ] The GENI_TO_CORE ("qup-core") ICC vote selects the QUP Core 2X clock rate. The CORE_2X_*_MHZ constants are expressed in Bps, but their values are several orders of magnitude too small. For example, the 50 MHz threshold is represented by 2500 rather than 25000000 Bps. As a result, clients using these constants can severely under-vote the QUP Core clock. Correct the constants to their intended Bps thresholds so that the ICC provider selects the corresponding QUP Core 2X clock rate. Drop the unused definitions. Fixes: 58ffbba6a399 ("soc: qcom: geni: Support for ICC voting") Cc: stable@kernel.org Signed-off-by: Viken Dadhaniya Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260915-correct-icc-bandwidth-vote-constants-v2-1-f78eb611204e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit cd33d578e4e44c1edbeed40e5d573afc91dba62e Author: Timur Kristóf Date: Mon Oct 5 06:56:47 2026 -0400 drm/amd/pm/si: Check AMD_IS_MOBILITY flag for PPSMC_SYSTEMFLAG_GPIO_DC [ Upstream commit cd883d0a3937df82a5ea03709ba8ba623b868419 ] Unfortunately, some desktop boards eg. the FirePro D500 have the HARDWAREDC platform flag set and also have a battery power state configured in their VBIOS. This makes no sense for a desktop GPU and results in incorrect behaviour: the clocks are stuck at lowest. We observed that the kernel driver can work around the issue in two possible ways: 1. Set PPSMC_SWSTATE_FLAG_DC on all power states 2. Clear PPSMC_SYSTEMFLAG_GPIO_DC We think that the PPSMC_SYSTEMFLAG_GPIO_DC flag makes the SMC assume it's running on battery even though this is a desktop machine with no battery, and that's why it doesn't do DPM on power states without PPSMC_SYSTEMFLAG_GPIO_DC. Issue was uncovered by "Fix updating clock limits from power states" because previously the limits for the battery state were not tracked separately. However, battery power state has lower frequencies and voltages, so the kernel doesn't set the DC flag on the current power state anymore. That causes the SMC to be stuck on the lowest clocks. Let's clear PPSMC_SYSTEMFLAG_GPIO_DC on desktop GPUs. We can use the AMD_IS_MOBILITY flag to determine that. Fixes: e6c5d36756e7 ("drm/amd/pm/si: Fix updating clock limits from power states") Closes: https://gitlab.freedesktop.org/mesa/mesa/-/work_items/16352 Signed-off-by: Timur Kristóf Reviewed-by: Mario Limonciello Link: https://patch.msgid.link/20260923120354.1027996-1-timur.kristof@gmail.com Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher (cherry picked from commit 58473c7c49ce9f5f5a4a1c24ffb9aa1d3c8771f4) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit ce0e675907b887db2b1e44a806118b0a7d8b6b18 Author: Jiangshan Yi Date: Tue Oct 6 16:14:19 2026 +0000 smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions [ Upstream commit b8e5dc4f95e5484159b343903f302eb6d783f2e6 ] When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit survives the write. This is a security issue: on local filesystems the setuid bit is stripped when a file is written, but over these cifs.ko mounts the bit persists on the server, potentially allowing an unexpected privilege escalation on subsequent execution. Fix this in two places: 1. cifs_setattr_nounix(): only take the "skip mode change" shortcut when the mode is emulated via the DOS read-only attribute (i.e. neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are in effect), so that the cleared mode is propagated to the server in the ACL / POSIX cases. 2. cifs_setattr_unix(): this function is only called when Unix extensions are in effect, so the mode is always stored on the server. Remove the shortcut entirely so that the cleared mode is always pushed. Fixes: d32c4f2626ac ("CIFS: ignore mode change if it's just for clearing setuid/setgid bits") Cc: stable@vger.kernel.org Signed-off-by: Jiangshan Yi Signed-off-by: Namjae Jeon Signed-off-by: Paulo Alcantara [ Backport note for 5.10: code lives in fs/cifs/inode.c; no sbflags local exists here, so test cifs_sb->mnt_cifs_flags directly (same flag bits). Drop the upstream posix_extensions clause: 5.10 lacks d413eabff18d ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions"), so cifs_setattr_nounix() has no POSIX ATTR_MODE branch; match its CIFS_ACL/MODE_FROM_SID check. ] Signed-off-by: Bjoern Doebel Assisted-by: opencode:kimi-k3 Signed-off-by: Sasha Levin commit fd5481dd75ea879c53c17882cbb065ad3bd6b766 Author: Josef Bacik Date: Wed Oct 7 17:55:40 2026 +0000 xen/netfront: drop RX packets with a short Ethernet header commit 089e58805c452e52179482b1025a8e309a57f801 upstream. handle_incoming_queue() pulls pull_to bytes into the head before calling eth_type_trans(). pull_to is the length of the first RX slot, capped at RX_COPY_THRESHOLD, and that length comes from the backend. Nothing checks it against ETH_HLEN. If the first slot is shorter than ETH_HLEN and more slots follow, the head ends up shorter than an Ethernet header while skb->len is longer, and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is shorter than ETH_HLEN, eth_type_trans() reads the header past the end of the data instead. Pull at least ETH_HLEN, and drop the packet if that fails, which also drops packets too short to hold an Ethernet header. This also checks the return value of the pull, which was ignored. Fixes: 0d160211965b ("xen: add virtual network device driver") Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik Link: https://patch.msgid.link/20261007-b4-xen-netfront-short-head-v1-1-12d7113a7e4e@toxicpanda.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 96389d05c9642cb50e623851e0a2da70f87c0d55 Author: Amit Sunil Dhamne Date: Thu Sep 10 07:08:50 2026 -0400 usb: typec: tcpm: constrain TCPM_SOURCING_VBUS event handling [ Upstream commit cd3b9cea675bbfebc223f007dc2f4e79524fa54c ] When a sink detach occurs while waiting for TX send status, the old TCPM_SOURCING_VBUS event along with TCPM_VBUS_EVENT and TCPM_CC_EVENT can be queued in port->pd_events. Because TCPM_SOURCING_VBUS is evaluated after TCPM_VBUS_EVENT and TCPM_CC_EVENT in tcpm_pd_event_handler(), a stale TCPM_SOURCING_VBUS event can override the detach handling and incorrectly set port->vbus_source and port->vbus_present to true. Add a state guard to check that the port is either operating as a Source (tcpm_port_is_source(port)) or in a Fast Role Swap (FRS) state up to FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED before processing TCPM_SOURCING_VBUS. Otherwise, discard and log the event. Log snippet for error condition before fix: [72792.204955] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS] [72792.204960] sourcing vbus [72792.204962] VBUS on [72792.204970] AMS POWER_NEGOTIATION start [72792.204974] cc:=4 [72792.205319] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION] [72792.205325] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION] [72792.205332] PD TX, header: 0x11a1 [72792.216911] PD TX complete, status: 2 [72792.216957] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION] [72792.218005] VBUS off [72792.218013] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION] [72792.218020] VBUS VSAFE0V [72792.218024] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [rev3 POWER_NEGOTIATION] [72792.218458] CC1: 2 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected] [72792.218467] VBUS on --> VBUS left on [72792.218980] disable vbus discharge ret:0 [72792.235193] Start toggling After fix: [ 1195.291691] state change SRC_ATTACHED -> SRC_STARTUP [rev3 NONE_AMS] [ 1195.291698] sourcing vbus [ 1195.291700] VBUS on [ 1195.291707] AMS POWER_NEGOTIATION start [ 1195.291710] cc:=4 [ 1195.291758] state change SRC_STARTUP -> AMS_START [rev3 POWER_NEGOTIATION] [ 1195.291794] state change AMS_START -> SRC_SEND_CAPABILITIES [rev3 POWER_NEGOTIATION] [ 1195.291798] PD TX, header: 0x11a1 [ 1195.297056] PD TX complete, status: 2 [ 1195.297092] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms [rev3 POWER_NEGOTIATION] [ 1195.297177] VBUS off [ 1195.297184] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION] [ 1195.297227] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_SEND_CAPABILITIES, polarity 0, disconnected] [ 1195.307469] cc:=2 [ 1195.307544] pending state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED @ 650 ms [rev3 POWER_NEGOTIATION] [ 1195.307555] Discarding sourcing vbus! Invalid state SRC_SEND_CAPABILITIES [ 1195.957636] state change SRC_SEND_CAPABILITIES -> SNK_UNATTACHED [delayed 650 ms] [ 1195.957732] disable vbus discharge ret:0 [ 1195.970196] Start toggling [ 1195.970468] VBUS off [ 1196.051637] VBUS off [ 1196.051642] VBUS VSAFE0V Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)") Cc: stable Assisted-by: Gemini:gemini-3.1-pro Signed-off-by: Amit Sunil Dhamne Reviewed-by: Badhri Jagan Sridharan Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260827-sourcing-vbus-v1-1-9be1aca991a0@google.com Signed-off-by: Greg Kroah-Hartman [ Removed the unavailable AMS_START/upcoming_state check to match the direct transition to FR_SWAP_SEND. ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1d306ec6d35a9d9ea9ead6565908e0c522582314 Author: Xu Yang Date: Thu Sep 10 07:08:49 2026 -0400 usb: typec: tcpm: fix debug accessory mode detection for sink ports [ Upstream commit f6ec9bb4acc7182b25a793ad094a764e1cb819a7 ] The port in debug accessory mode can be either a source or sink. The previous tcpm_port_is_debug() function only checked for source port. Commit 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug") changed the detection logic to support both roles, but left some logic in _tcpm_cc_change() unchanged, This causes the state machine to transition to an incorrect state when operating as a sink in debug accessory mode. Log as below: [ 978.637541] CC1: 0 -> 5, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected] [ 978.637567] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS] [ 978.637596] pending state change SRC_ATTACH_WAIT -> DEBUG_ACC_ATTACHED @ 180 ms [rev1 NONE_AMS] [ 978.647098] CC1: 5 -> 0, CC2: 5 -> 5 [state SRC_ATTACH_WAIT, polarity 0, connected] [ 978.647115] state change SRC_ATTACH_WAIT -> SRC_ATTACH_WAIT [rev1 NONE_AMS] It should go to SNK_ATTACH_WAIT instead of SRC_ATTACH_WAIT state. To fix this, add tcpm_port_is_debug_source() and tcpm_port_is_debug_sink() helper to explicitly identify the power mode in debug accessory mode. Update the state transition logic in _tcpm_cc_change() to ensure the state machine transitions comply with Type-C specification. Also update the logic in run_state_machine() to keep consistency. Fixes: 8db73e6a42b6 ("usb: typec: tcpm: allow sink (ufp) to toggle into accessory mode debug") Cc: stable Signed-off-by: Xu Yang Acked-by: Heikki Krogerus Reviewed-by: Amit Sunil Dhamne Link: https://patch.msgid.link/20260424074009.2979266-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman [5.10 dependency adaptation: This tree does not contain 8db73e6a42b6 or sink debug accessory support. Retain the source debug predicate and its source-path callers, and keep tcpm_port_is_debug() source-only. Drop the sink predicate and sink accessory state transitions, which require the missing feature. This supplies tcpm_port_is_debug_source() for cd3b9cea675b without changing 5.10 accessory behavior or adding functions. The target applies with a three-way merge; its references to AMS_START and upcoming_state still require a separate 5.10 adaptation because AMS and Collision Avoidance was not backported.] Stable-dep-of: cd3b9cea675b ("usb: typec: tcpm: constrain TCPM_SOURCING_VBUS event handling") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit e862304eef33f0ba4f2776cf91b0673450baab48 Author: Gilberto Conde Date: Mon Sep 21 10:34:26 2026 +0100 net: usb: qmi_wwan: add Quectel EG120K-EA commit 0f2fd31f63c65c409bd336af3a42d478a9207c1f upstream. Add support for the Quectel EG120K-EA LTE Cat.12 module (USB ID 2c7c:030b). Its QMI interface (interface 4) uses class/subclass/protocol ff/ff/ff like the other recent Quectel modules, so match it the same way. The product ID is shared with the EM060K, which the option driver already knows and uses to claim the serial interfaces. Without a qmi_wwan entry the data interface is left unbound. Tested on a GL.iNet GL-X2000, where the module is soldered down and enumerates at SuperSpeed: cdc-wdm0 and wwan0 appear and ModemManager brings up a data session. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EG120K-EA S: SerialNumber=45546267 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Gilberto Conde Link: https://patch.msgid.link/20260921093426.2870266-1-gilbertorconde@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7acc1995bdcfdd82b2dd0dc735b1a4b076ae88a0 Author: Tristan Madani Date: Tue Apr 21 13:50:16 2026 +0000 wifi: wcn36xx: fix heap overflow from oversized firmware HAL response commit 88a240d86d3d64521f9194abe185ac71cc74d0bd upstream. The firmware response dispatcher copies all synchronous HAL responses into the 4096-byte hal_buf without validating the response length. A response exceeding WCN36XX_HAL_BUF_SIZE causes a heap buffer overflow with firmware-controlled content. Add a bounds check on the response length. Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Tristan Madani Reviewed-by: Loic Poulain Link: https://patch.msgid.link/20260421135018.352774-2-tristmd@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin Signed-off-by: Roman Demidov Signed-off-by: Greg Kroah-Hartman commit 8a631e1aaa1ebbc9de916927fa01707244e18291 Author: Kyle Zeng Date: Sat Jun 6 17:41:29 2026 -0700 ALSA: seq: Clear variable event pointer on read commit 705dd6dcbc0ea87351c660c1a6443f85f1001c76 upstream. snd_seq_read() copies a queued variable-length event header to userspace before expanding the payload. Queued variable-length events use SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first extension cell. The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the copy, but it leaves data.ext.ptr untouched. A userspace sequencer client can therefore write a direct variable event to itself and read back the extension-cell kernel address from the returned header. Clear the temporary header pointer before copy_to_user(). The original queued event remains unchanged and is still passed to snd_seq_expand_var_event(), so payload expansion keeps using the internal chain. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kyle Zeng Link: https://patch.msgid.link/20260607004129.61345-1-kylebot@openai.com Signed-off-by: Takashi Iwai Signed-off-by: Roman Demidov Signed-off-by: Greg Kroah-Hartman commit 845875f4c6788c88e2334fe5825934821decbdc8 Author: Lu Baolu Date: Wed Oct 22 16:26:27 2025 +0800 iommu: disable SVA when CONFIG_X86 is set commit 72f98ef9a4be30d2a60136dd6faee376f780d06c upstream. Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages. Link: https://lkml.kernel.org/r/20251022082635.2462433-1-baolu.lu@linux.intel.com Link: https://lkml.kernel.org/r/20251022082635.2462433-2-baolu.lu@linux.intel.com Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices") Signed-off-by: Lu Baolu Suggested-by: Jason Gunthorpe Reviewed-by: Jason Gunthorpe Cc: Alistair Popple Cc: Andy Lutomirski Cc: Borislav Betkov Cc: Dave Hansen Cc: David Hildenbrand Cc: Ingo Molnar Cc: Jann Horn Cc: Jean-Philippe Brucker Cc: Joerg Roedel Cc: Kevin Tian Cc: Liam Howlett Cc: Lorenzo Stoakes Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Mike Rapoport Cc: Peter Zijlstra Cc: Robin Murohy Cc: Thomas Gleinxer Cc: "Uladzislau Rezki (Sony)" Cc: Vasant Hegde Cc: Vinicius Costa Gomes Cc: Vlastimil Babka Cc: Will Deacon Cc: Yi Lai Cc: Signed-off-by: Andrew Morton [ The context change is due to the commit be51b1d6bbff ("iommu/sva: Refactoring iommu_sva_bind/unbind_device()") and the commit 757636ed2607 ("iommu: Rename iommu-sva-lib.{c,h}") in v6.2 which are irrelevant to the logic of this patch. ] Signed-off-by: Rahul Sharma Signed-off-by: Roman Demidov Signed-off-by: Greg Kroah-Hartman commit 022af89207fcc992ec5c712c14e2e018c335eb1e Author: Kuniyuki Iwashima Date: Sat May 2 03:12:59 2026 +0000 vxlan: Fix potential null-ptr-deref in vxlan_gro_prepare_receive(). commit 30a45c0bffdd62350261e2f2689fdba426a33578 upstream. udp_tunnel_sock_release() could set sk->sk_user_data to NULL while vxlan_gro_prepare_receive() is running. Let's check if rcu_dereference_sk_user_data() is NULL after skb_gro_remcsum_init(). Fixes: 5602c48cf875 ("vxlan: change vxlan to use UDP socket GRO") Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260502031401.3557229-7-kuniyu@google.com Signed-off-by: Jakub Kicinski [ Artem Novikov: Apply the check to the older vxlan_gro_receive() implementation. Initialize the remcsum state first and use the existing out path for cleanup when sk_user_data has been cleared. ] Signed-off-by: Artem Novikov Signed-off-by: Fedor Pchelkin Signed-off-by: Greg Kroah-Hartman commit 2eaeb83153b848923a0b121402b4be88223ca62e Author: Stefan Wahren Date: Sun Jan 23 21:02:21 2022 +0100 staging: vchiq_arm: Avoid NULL ptr deref in vchiq_dump_platform_instances commit aa899e686d442c63d50f4d369cc02dbbf0941cb0 upstream. vchiq_get_state() can return a NULL pointer. So handle this cases and avoid a NULL pointer derefence in vchiq_dump_platform_instances. Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/1642968143-19281-17-git-send-email-stefan.wahren@i2se.com Signed-off-by: Sasha Levin Signed-off-by: Roman Demidov Signed-off-by: Greg Kroah-Hartman commit 31b22ca4f5ab8c495fd8bb44c06573f1fb7833a2 Author: Chengchang Tang Date: Sun Jan 4 14:40:54 2026 +0800 RDMA/hns: Fix WQ_MEM_RECLAIM warning commit c0a26bbd3f99b7b03f072e3409aff4e6ec8af6f6 upstream. When sunrpc is used, if a reset triggered, our wq may lead the following trace: workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma] is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle [hns_roce_hw_v2] WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144 Call trace: check_flush_dependency+0xe0/0x144 start_flush_work.constprop.0+0x1d0/0x2f0 __flush_work.isra.0+0x40/0xb0 flush_work+0x14/0x30 hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2] ib_destroy_qp_user+0x9c/0x2b4 rdma_destroy_qp+0x34/0xb0 rpcrdma_ep_destroy+0x28/0xcc [rpcrdma] rpcrdma_ep_put+0x74/0xb4 [rpcrdma] rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma] xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18 Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. Fixes: ffd541d45726 ("RDMA/hns: Add the workqueue framework for flush cqe handler") Signed-off-by: Chengchang Tang Signed-off-by: Junxian Huang Link: https://patch.msgid.link/20260104064057.1582216-2-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin Signed-off-by: Roman Demidov Signed-off-by: Greg Kroah-Hartman commit 8f11d22c0478b21595cfa4f4fddfa567cf186bc7 Author: Wentao Liang Date: Mon Oct 5 02:40:46 2026 -0400 wifi: wlcore: Fix runtime PM leak in wlcore_remove() [ Upstream commit a8b8881d0c1aff544fae190469d86db7b07f43a9 ] pm_runtime_get_sync() keeps the runtime PM usage counter elevated even when it returns an error, so the reference taken at the beginning of wlcore_remove() has to be dropped on every exit path. When the device was not initialized the function returned early without doing so, leaking the reference. Release it with pm_runtime_put_noidle() as done on the other early error paths of this driver. Fixes: fa2648a34e73f ("wlcore: Add support for runtime PM") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260917122325.2150910-1-vulab@iscas.ac.cn Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit c8a6aad33e5bb31a3cc6492de6b1e2dbc4e9ff81 Author: Uwe Kleine-König Date: Mon Oct 5 02:40:45 2026 -0400 wifi: wlcore: Convert to platform remove callback returning void [ Upstream commit f00928012886a07ca6817ea70eb4856ce280ce05 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. wlcore_remove() returned zero unconditionally. With that converted to return void instead, the wl12xx and wl18xx driver can be converted to .remove_new trivially. Signed-off-by: Uwe Kleine-König Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230912171249.755901-1-u.kleine-koenig@pengutronix.de Stable-dep-of: a8b8881d0c1a ("wifi: wlcore: Fix runtime PM leak in wlcore_remove()") Signed-off-by: Sasha Levin commit 30f958b6942a63f8ac6fc4ed571a4a45126578c7 Author: Uwe Kleine-König Date: Mon Oct 5 02:40:44 2026 -0400 wifi: wl12xx: Drop if with an always false condition [ Upstream commit 69ddcea564437ce4b0d5143f37a9154fcef8d3d2 ] The remove callback is only called after probe completed successfully. In this case platform_set_drvdata() was called with a non-NULL argument (in wlcore_probe()) and so wl is never NULL. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220715224619.ht7bbzzrmysielm7@pengutronix.de Stable-dep-of: a8b8881d0c1a ("wifi: wlcore: Fix runtime PM leak in wlcore_remove()") Signed-off-by: Sasha Levin commit f255e87b4f7eda568c37d6eae5db1d1a8aca5968 Author: Frank Sorenson Date: Mon Oct 5 12:52:31 2026 -0500 smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races [ Upstream commit 19465a9aeb664f1d710d0d22c07c31bfb7c85446 ] The invalidHandle, swapfile, oplock_break_cancelled, offload, and status_file_deleted fields are stored in the same bitfield byte in struct cifsFileInfo, but are updated in different code paths that may run simultaneously, and are protected by different locks. Since bitfield assignments generate byte-level read-modify-write operations, a modification to one flag can overwrite a concurrent modification to another flag. To avoid these races, convert these flags from a bitfield to separate bool fields. Closes: https://lore.kernel.org/r/7689764e-c0f6-4016-9557-b54cf4a3de4e@redhat.com Fixes: 3bc303c254335 ("cifs: convert oplock breaks to use slow_work facility (try #4)") Fixes: 4e8aea30f7751 ("smb3: enable swap on SMB3 mounts") Fixes: ffceb7640cbfe ("smb: client: do not defer close open handles to deleted files") Fixes: 173217bd73365 ("smb3: retrying on failed server close") Signed-off-by: Frank Sorenson Cc: stable@vger.kernel.org Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara (cherry picked from commit 19465a9aeb664f1d710d0d22c07c31bfb7c85446) [ status_file_deleted and offload not present in kernel 5.10 ] Signed-off-by: Frank Sorenson Signed-off-by: Sasha Levin commit b734803314595a3c2833df28cb043669b5f04d8c Author: Mehmet Fide Date: Tue Sep 1 09:39:07 2026 +0200 mtd: rawnand: vf610_nfc: fix false bitflips on reads of erased pages [ Upstream commit 68fe2faf5c69d0e21f94cd695d28f0ba677d484f ] When the ECC engine fails to decode a page, the driver re-reads the OOB area with the engine bypassed, but runs the erased-page check for the data area on the buffer left in the controller SRAM by the failed transfer. That buffer does not hold what is on the flash: the failing engine writes a bogus single-bit "correction" into it. In the 60-byte ECC mode the all-0xff content of an erased page always decodes to the same error location, so every erased page shows one stale zero bit at data offset 0x5FD, which the erased-page check then reports as a corrected bitflip. Edward Karpicz discovered this behaviour and identified the offset on a Colibri VF61; the analysis and the fix build on his finding. Measured with an instrumented driver on a Colibri VF50 (MX30LF1G18AC, 32-bit ECC): reading a 126 MiB partition with nanddump increased the corrected counter by 18035, exactly one per erased page, while raw reads of the same pages return clean 0xff. A v4.4 kernel on the VF61 (MX30LF4G28AC) accumulates the same false counts, so the behaviour follows the controller rather than the chip or the driver generation. Neither the Vybrid reference manual nor the published mask set errata (VFXXX_2N02G) document it. The 45-byte ECC mode is not affected. Restoring the known byte is not enough: on pages that fail to decode with content other than all-0xff the engine writes its correction wherever the syndrome points (measured at a different offset on such a page), so the check has to run on what the flash holds. Re-read the data area with the ECC engine bypassed, exactly as already done for the OOB area. The corrected counter then stays at zero on both boards. Reported-by: Edward Karpicz Link: https://community.toradex.com/t/colibri-vf50-vf61-on-the-current-bsp-mainline-u-boot-v2026-07-and-linux-6-18-lts/30735 Signed-off-by: Mehmet Fide Signed-off-by: Miquel Raynal Signed-off-by: Sasha Levin commit 3c4c2c96d00d112626736cc865b3c75aa8fb6de3 Author: Jakub Kicinski Date: Mon Oct 5 15:18:43 2026 +0200 page_pool: always add GFP_NOWARN for ATOMIC allocations [ Upstream commit f3b52167a0cb23b27414452fbc1278da2ee884fc ] Driver authors often forget to add GFP_NOWARN for page allocation from the datapath. This is annoying to users as OOMs are a fact of life, and we pretty much expect network Rx to hit page allocation failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations by default. Reviewed-by: Mina Almasry Link: https://patch.msgid.link/20250912161703.361272-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit cbc05413d3694193494b2374b56bae801ac41fec Author: Yi Yang Date: Mon Oct 5 04:32:14 2026 -0400 vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF [ Upstream commit 226bd5603371cd9f6642cbb9e9a677f445de3530 ] The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") sits after the 'if (ret)' block, so the copy-failure break path exits the loop without reloading vc. If the vc was kfree()'d via vc_port_destruct during the unlocked copy_from_user() window, the post-loop 'if (written && vc) vcs_scr_updated(vc)' is reached with a stale non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only handles the NULL case, not this stale-non-NULL case; vcs_notifier() then reads param->vc->vc_num from freed memory: BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0 Read of size 2 at addr ffff888007149190 Call Trace: vcs_notifier+0x7c/0xd0 atomic_notifier_call_chain+0x70/0xa0 vcs_scr_updated+0x77/0xa0 vcs_write+0x71b/0x7e0 Allocated by task: vc_allocate -> con_install -> tty_open Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct) Move the reload to immediately after console_lock(), before 'if (ret)', so every break path below passes a fresh vc to the post-loop vcs_scr_updated(). Fixes: a287620312dc ("vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") Cc: stable@kernel.org Signed-off-by: Yi Yang Link: https://patch.msgid.link/20260901113131.2760010-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman [ sashal: Adapted the -ENXIO error return to use the existing unlock_out cleanup path. ] Signed-off-by: Sasha Levin commit 6207d7df96b3a7f507f0bfc8842b3760ee2fb1f8 Author: Chris Mason Date: Thu May 28 15:32:10 2026 -0400 SUNRPC: reject duplicate CREDS_VALUE options [ Upstream commit 2e4ce62385c1b8a887c5370af058ac7b52a8eaf9 ] gssx_dec_option_array() walks the wire-supplied option array and, for every entry whose name matches CREDS_VALUE, calls gssx_dec_linux_creds() on the same struct svc_cred. That helper unconditionally installs a fresh groups_alloc() result into creds->cr_group_info without releasing whatever pointer was already there: for (i = 0; i < count; i++) { ... decode name ... if (length == sizeof(CREDS_VALUE) && memcmp(p, CREDS_VALUE, sizeof(CREDS_VALUE)) == 0) { err = gssx_dec_linux_creds(xdr, creds); ... } } A reply that carries two CREDS_VALUE entries therefore overwrites cr_group_info on the second iteration and orphans the group_info allocated by the first call. The earlier free_creds path only releases the last cr_group_info via free_svc_cred(), so the first allocation's refcount stays at one and its kvmalloc-backed storage is leaked. No in-tree caller of gssp_accept_sec_context_upcall() expects more than one CREDS_VALUE per reply. Fix by tracking whether a CREDS_VALUE option has already been decoded and returning -EINVAL on any subsequent match, so the free_creds path releases the single group_info that was installed. Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth") Cc: stable@vger.kernel.org Assisted-by: kres (claude-opus-4-7) Signed-off-by: Chris Mason Reviewed-by: Jeff Layton Link: https://patch.msgid.link/20260528-tier2-v1-3-d026a1415e0b@oracle.com Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit ac86b45bb978cd4fdbcaaca82dd0f2337f8e310c Author: Chris Mason Date: Thu May 28 15:32:09 2026 -0400 SUNRPC: fix gssx_dec_option_array error path bugs [ Upstream commit 5e9a94539b1ec17a89177d952badfd0d844d694a ] Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. Fixes: 3cfcfc102a5e ("SUNRPC: fix some memleaks in gssx_dec_option_array") Cc: stable@vger.kernel.org Assisted-by: kres (claude-opus-4-7) Signed-off-by: Chris Mason Reviewed-by: Jeff Layton Link: https://patch.msgid.link/20260528-tier2-v1-2-d026a1415e0b@oracle.com Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit ed84504713e8357f33693f638fda68fc98f0c9d2 Author: Asad Kamal Date: Tue Jun 23 00:25:04 2026 +0800 drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read [ Upstream commit 5d3cc8e388464f485d0944b87b8f9426e637d082 ] Reject voltage objects whose usSize is smaller than the header or would advance the cursor past the table end, preventing an infinite loop or heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table. Fixes: c82baa281843 ("drm/amd/powerplay: add Tonga dpm support (v3)") Fixes: 0d2c7569e196 ("drm/amdgpu: add new atomfirmware based helpers for powerplay") Signed-off-by: Asad Kamal Reviewed-by: Lijo Lazar Reviewed-by: Yang Wang Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit e6bdc8977543f340adc8f63ddd336805805aed28 Author: Amit Pundir Date: Wed Jul 26 18:57:19 2023 +0530 arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved [ Upstream commit 110e70fccce4f22b53986ae797d665ffb1950aa6 ] Adding a reserved memory region for the framebuffer memory (the splash memory region set up by the bootloader). It fixes a kernel panic (arm-smmu: Unhandled context fault at this particular memory region) reported on DB845c running v5.10.y. Cc: stable@vger.kernel.org # v5.10+ Reviewed-by: Caleb Connolly Signed-off-by: Amit Pundir Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230726132719.2117369-2-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 77b5a8f414e6e1d364c2a65e1cb2f146880ad289 Author: Sasha Levin Date: Tue Oct 6 11:07:46 2026 -0400 Revert "scsi: sd: sd_zbc: Use logical blocks as unit when querying zones" This reverts commit cab3909d1be51cf1caa78ac8683e4bb69aab4c4f, the 5.10.y backport of upstream 43af5da09efb. As Simon Liebold found for the identical 5.15.y backport, the change makes sd_zbc_report_zones() advance with lba += sdkp->zone_blocks * i; zone_blocks is u32, so the product is computed in 32 bits and wraps before being widened into the 64-bit lba. A host-managed SMR drive that returns 8192 or more zones in one REPORT ZONES has the next batch requested at a wrapped LBA, zone revalidation fails, and sd truncates the device to zero capacity. Mainline never shipped this form: c976e588b34e ("scsi: sd: sd_zbc: Hide gap zones") rewrote the loop in the same series, and it is not in 5.10.y. 43af5da09efb is only a cleanup, and the scsi_debug fix that pulled it in as a dependency (93dde0bf2f39) touches only scsi_debug.c, so revert it. Link: https://lore.kernel.org/stable/20261005150713.3919586-1-simonlie@amazon.de/ Signed-off-by: Sasha Levin commit d83345a8c0143ea31822be0aeb91a63bfc58215e Author: Victor Nogueira Date: Mon Oct 5 12:28:46 2026 +0200 net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode [ Upstream commit 9cb36faedeafb9720ac236aeae2ea57091d90a09 ] When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter operation done at u32_set_parms. Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.") Signed-off-by: Victor Nogueira Acked-by: Jamal Hadi Salim Reviewed-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 81bf9d78fa246a166619196ff5005430ed2bc7c2 Author: Bart Van Assche Date: Mon Oct 5 12:04:33 2026 +0200 loop: Fix use-after-free issues [ Upstream commit 9b0cb770f5d7b1ff40bea7ca385438ee94570eec ] do_req_filebacked() calls blk_mq_complete_request() synchronously or asynchronously when using asynchronous I/O unless memory allocation fails. Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor 'rq' after do_req_filebacked() finished unless we are sure that the request has not yet been completed. This patch fixes the following kernel crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054 Call trace: css_put.42938+0x1c/0x1ac loop_process_work+0xc8c/0xfd4 loop_rootcg_workfn+0x24/0x34 process_one_work+0x244/0x558 worker_thread+0x400/0x8fc kthread+0x16c/0x1e0 ret_from_fork+0x10/0x20 [ Dropped the part fixing c74d40e8b5e2 as this commit isn't included in 5.10. Kept the part fixing bc07c10a3603 ] Cc: Christoph Hellwig Cc: Ming Lei Cc: Jan Kara Cc: Johannes Weiner Cc: Dan Schatzberg Fixes: c74d40e8b5e2 ("loop: charge i/o to mem and blk cg") Fixes: bc07c10a3603 ("block: loop: support DIO & AIO") Signed-off-by: Bart Van Assche Reviewed-by: Ming Lei Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Miguel Gazquez (Schneider Electric) Signed-off-by: Sasha Levin commit 93ecee9ff3af4c2b482fdd4ec98c3308e8dd23a6 Author: Cong Nguyen Date: Fri Aug 28 17:59:09 2026 +0700 iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure commit 4daa9ca557b4b98ae1ad38a6d1deaa3e31eb8edf upstream. pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mirroring the teardown order already used in lidar_remove(). Fixes: 4ac4e086fd8c ("iio: pulsedlight-lidar-lite: add runtime PM") Assisted-by: Claude:claude-opus-4 Signed-off-by: Cong Nguyen Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 81a13dbcde167b249ba01261cc98962648e6271a Author: Salah Triki Date: Thu Sep 17 14:00:52 2026 +0100 iio: proximity: isl29501: Fix return type of isl29501_register_write commit e8dd273d199f5bbe295a8e3d8b777c5505b6b2e1 upstream. isl29501_register_write() was returning a u32 instead of an int. Since the function returns negative error codes (such as -ERANGE or return values from i2c_smbus_write_byte_data()), returning an unsigned integer type prevents callers from correctly checking for negative error conditions. Fix this by changing the function return type from u32 to int. This was found through manual code review. Fixes: 1c28799257bc ("iio: light: isl29501: Add support for the ISL29501 ToF sensor.") Signed-off-by: Salah Triki Reviewed-by: Joshua Crofts Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 6f2bb000493c3b4f5715b3103657393672aea05b Author: Fan Wu Date: Thu Aug 6 13:29:23 2026 +0000 iio: light: gp2ap020a00f: drain irq_work after free_irq commit 63213927b141085b6c8719b8037dab3074b7e0fe upstream. The threaded IRQ handler queues data->work through irq_work_queue() so the trigger is polled from a per-CPU context. free_irq() does not flush an irq_work the handler already queued, so after gp2ap020a00f_remove() returns that work may still run and call iio_trigger_poll() on data->trig, which the devm cleanup has already freed, causing a use-after-free. Add irq_work_sync(&data->work) after free_irq() in remove() and in the probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs: fix use-after-free on remove"). Found by an in-house static analysis tool, confirmed by manual review. Fixes: bf29fbeaa13d ("iio: gp2ap020a00f: Add a driver for the device") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 8a7ff80c5cce57c65c105efd3a3e112edcce0e08 Author: Arka Mondal Date: Sun Aug 16 03:27:24 2026 +0900 iio: imu: adis16480: fix unprotected debugfs reads commit e1dea54496f90a62318cf4eeaa1e9ef8316e92b6 upstream. The firmware_revision and firmware_date file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. Fixes: 9bf94f836e32 ("imu:adis16480: fix debugfs_simple_attr.cocci warnings") Signed-off-by: Arka Mondal Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 48bb3c9b4a2fac64cb17c357418ebfbd4c9ac8ff Author: Arka Mondal Date: Sun Aug 16 03:27:25 2026 +0900 iio: imu: adis16400: fix unprotected debugfs reads commit d94787287a113a1326211647d5e0deed1e9de105 upstream. adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too. Fixes: ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") Signed-off-by: Arka Mondal Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c325d98b824b61cf7761335c633bfac22ec8e85b Author: Arka Mondal Date: Sun Aug 16 03:27:26 2026 +0900 iio: gyro: adis16136: fix unprotected debugfs reads commit 2b498df75d6c29aa3e760127ae0f0003df598b53 upstream. The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. Fixes: 9aaea09b4cbd ("gyro:adis16136: fix debugfs_simple_attr.cocci warnings") Signed-off-by: Arka Mondal Reviewed-by: Andy Shevchenko Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit bd6a2cdcd73408295a0e7c3d3702826461a465c7 Author: Felix Gu Date: Sun Sep 6 23:58:34 2026 +0800 iio: adc: sun4i-gpadc-iio: drop underflowing pm_runtime_put() calls commit 8b958dd214ad0c003f56549e9e039cb8067dc1a2 upstream. Neither the error path in sun4i_gpadc_probe() nor sun4i_gpadc_remove() ever holds a runtime PM usage count. So the pm_runtime_put() in both places always triggers the "Runtime PM usage count underflow!" warning on every failed probe and every unbind. Drop both calls. Fixes: d1caa9905538 ("iio: adc: add support for Allwinner SoCs ADC") Signed-off-by: Felix Gu Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 4a816f67853d4b2915b9e913c4434fb0f3f5d018 Author: Felix Gu Date: Sun Sep 6 23:58:35 2026 +0800 iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure commit 2cdc7ef31827db4fbc6283750420639569e1f0e9 upstream. If devm_thermal_of_zone_register() fails, probe returns without unregistering the IIO map array or disabling runtime PM. Jump to err_map to release them. Fixes: b0a242894f11 ("iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pm") Signed-off-by: Felix Gu Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 1c15b39d4c8e33fc8b681af061d6d994810480ee Author: Salah Triki Date: Wed Aug 19 12:41:01 2026 +0100 iio: accel: sca3000: fix frequency divider condition check commit d380bf5f94a892e546d9a94e8557ad866b043a2a upstream. When setting the sampling frequency, the check for `base_freq / 2` is followed by an independent `if` statement for `base_freq / 4`. If `val` equals `base_freq / 2`, the second check fails and falls through to the `else if (val != base_freq)` branch, returning `-EINVAL` erroneously. Fix this by chaining the checks with `else if`. Fixes: e0f3fc9b47e6 ("iio: accel: sca3000_core: implemented IIO_CHAN_INFO_SAMP_FREQ") Signed-off-by: Salah Triki Reviewed-by: Joshua Crofts Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit b33dfdc0f22dd6c9cb9ae34a32723ef0a5d2ccf5 Author: Jiale Yao Date: Fri Sep 25 22:09:43 2026 +0800 iio: accel: kxcjk-1013: reject duplicate event disable commit dd30c10ff60d2b30386c23bb7c61cc97f2385c97 upstream. The IIO core does not filter duplicate writes to the event enable attribute. kxcjk1013_write_event_config() already ignores repeated enable requests, but a repeated disable request still calls kxcjk1013_set_power_state(data, false), dropping a runtime PM reference that was not acquired for this request. This can underflow the runtime PM usage count and trigger a "Runtime PM usage count underflow" warning. Return early when the requested state already matches ev_enable_state. Fixes: b4b491c0832e ("iio: accel: kxcjk-1013: Support thresholds") Signed-off-by: Jiale Yao Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9fba032802b5858bc6186b34f8e966429ff155ab Author: Daehyeon Ko <4ncienth@gmail.com> Date: Wed Sep 9 10:07:37 2026 +0900 thunderbolt: Reject oversized XDomain properties responses commit 80756e263846ab694984e749e8c626897331438f upstream. tb_xdp_properties_request() allocates room for 45 data dwords in its 252-byte response buffer. The XDomain length field is six bits wide, however, and a malicious peer can set it to 63. After the fixed response fields are subtracted, the driver treats this as 48 data dwords. Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to allocation size") only bounds the copy against data_len. If data_len is at least 48, memcpy() reads 192 bytes from the 180-byte res->data array, causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478 ("thunderbolt: Limit XDomain response copy to actual frame size") limits the earlier copy but does not constrain this header-derived length. Reject response data lengths that exceed the allocated source buffer before copying them into the assembled property block. Fixes: d1ff70241a27 ("thunderbolt: Add support for XDomain discovery protocol") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Signed-off-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman commit deb911fed226838f20bda27d380a077d7b8f773f Author: Ian Lin Date: Fri Sep 4 16:00:46 2026 +0800 USB: serial: option: add Compal EXC-T1 support commit b51faf3f2e307f114854bbe6d495f03cd5370686 upstream. The Compal EXC-T1 is a Qualcomm MDM9207-based LTE modem which reports "EXC-x1" as its USB product string. It exposes diagnostic, modem, AT, and NMEA ports as vendor-specific interfaces with subclass 0x10 and protocols 0x01 through 0x04. Add exact interface matches for these four ports, leaving the ff/ff/ff interface unbound. Relevant output from usb-devices: T: Bus=03 Lev=02 Prnt=03 Port=03 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b7 ProdID=4d22 Rev=03.18 S: Manufacturer=CEI S: Product=EXC-x1 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan Tested on a Compal EXC-T1 modem using an Ubuntu kernel build. The four serial interfaces bound to option and exposed ttyUSB3 through ttyUSB6. Assisted-by: Codex:GPT-5 Signed-off-by: Ian Lin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 69a95039736c8f579d79cca7e10d6bb23a17b87e Author: Sebastian Sjoholm Date: Thu Sep 3 20:00:29 2026 +0200 USB: serial: option: add Quectel RG660QB commit 6177bcd94be83f80a032c2e69a06606d325335b9 upstream. Add support for the Quectel RG660QB 5G module (USB ID 2c7c:013d). The interface layout is the same as the RG650V: If 0: DIAG ff/ff/30, 2 endpoints If 1: NMEA ff/00/00, 2 endpoints If 2: AT ff/00/00, 3 endpoints If 3: Modem ff/00/00, 3 endpoints If 4: QMI ff/ff/ff, 3 endpoints Match the serial interfaces on class/subclass/protocol so that the QMI interface is left to qmi_wwan. # lsusb -v -d 2c7c:013d Bus 004 Device 002: ID 2c7c:013d Quectel Wireless Solutions Co., Ltd. RG660QB-EU Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x013d bcdDevice 6.06 iManufacturer 1 Quectel iProduct 2 RG660QB-EU iSerial 3 f50119d0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0105 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 6 CDEV Serial ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 6 CDEV Serial ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 7 RmNet Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x0023 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1100 bmSublinkSpeedAttr[0] 0x000a4030 Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[1] 0x000a40b0 Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus Device Status: 0x0000 (Bus Powered) Tested with an early sample of the module on a Quectel 5G EVB connected over USB 3 to a Raspberry Pi 5. Assisted-by: LLM Signed-off-by: Sebastian Sjoholm Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit b8ebca84053abd92053f80d4a178744dcdc0f9f5 Author: Ian Lin Date: Mon Aug 31 16:44:05 2026 +0800 USB: serial: option: add Compal EXM-G1x support commit 7f11480cda081de78a05d8c97073df66326b50b3 upstream. The Compal EXM-G1x is a Qualcomm SDX12-based LTE modem. Add support for its vendor-specific serial interfaces with protocols 0x30, 0x40, and 0x60. Relevant output from usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=04b7 ProdID=8217 Rev=05.04 S: Manufacturer=COMPAL S: Product=EXM-G1x C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan Tested on a Compal EXM-G1x modem. Assisted-by: Codex:GPT-5 Signed-off-by: Ian Lin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit b279d49e10fc1b94683861189de70b4809be55d8 Author: Carlo Szelinsky Date: Wed Aug 12 13:42:28 2026 +0300 USB: serial: option: add Quectel EG060W commit cd243401994880b8b6810c53177bce56eebaece5 upstream. Add Quectel EG060W with product ID 0x6004. The three vendor-specific interfaces are DIAG, NMEA and AT; the CDC-NCM data interfaces are handled by the cdc_ncm driver. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6004 Rev= 3.18 S: Manufacturer=Quectel S: Product=EG060W-EAAA S: SerialNumber=123456789ABCD C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr= 2mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0d Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Carlo Szelinsky Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 62bd58cd45c156082168bd7f82815f7ca175c4e5 Author: Zhao Dongdong Date: Mon Aug 17 15:14:27 2026 +0800 USB: serial: option: add support for SIMCom SIM8260C commit 35c950c9ec2c4c4d45dc9b63cfe8fca774ce33a0 upstream. Add support for SIMCom SIM8260C (1e0e:902b). T: Bus=08 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=1e0e ProdID=902b Rev= 5.04 S: Manufacturer=SIMCOM S: Product=SDXLEMUR-LITE-MTP _SN:120696AB S: SerialNumber=0123456789ABCDEF C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 5 IfCount= 3 Cls=01(audio) Sub=00 Prot=20 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan_simcom E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I:* If#= 6 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio I: If#= 6 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=05(O) Atr=0d(Isoc) MxPS= 34 Ivl=1ms I:* If#= 7 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=(none) I: If#= 7 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=(none) E: Ad=89(I) Atr=0d(Isoc) MxPS= 34 Ivl=1ms Signed-off-by: Zhao Dongdong Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e8dd520070e1d89ab2fabdd514dd2b4024fabc1f Author: Johan Hovold Date: Fri Aug 21 17:45:44 2026 +0200 USB: serial: fix dynamic id driver deregistration race commit 63594e8ffe097bc0b7639936f33799a7653dded2 upstream. Only free the dynamic ids after having deregistered the driver and removed the "new_id" attribute to avoid leaking any id added by a racing write to the attribute. Fixes: 93bacefc4cc0 ("USB serial: add dynamic id support to usb-serial core") Cc: stable@vger.kernel.org # 2.6.21 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 1062fd4925413e281249f8ec353a2aaab33f948d Author: Johan Hovold Date: Tue Sep 15 14:40:11 2026 +0200 USB: serial: ssu100: fix baud rate overflow commit afc235a217360c6859068d2e37a4df305c4d1be2 upstream. The requested baud rate is incorrectly truncated to 16 bits so that line speeds above 65535 bps cannot be set. Use 32 bits for the rate and remainder while rejecting rates outside of [50,460800] to avoid having the divisor or remainder overflow. This issue was flagged by an LLM. Fixes: 52af95459939 ("USB: add USB serial ssu100 driver") Cc: stable@vger.kernel.org # 2.6.36 Cc: Bill Pemberton Assisted-by: LLM Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit bde1649e6bc551e2a6f724155950d487010559dc Author: Johan Hovold Date: Tue Sep 15 14:40:12 2026 +0200 USB: serial: quatech2: fix baud rate overflow commit ec06546b43b612cefc851558981b4955c0ef9e46 upstream. The requested baud rate is incorrectly truncated to 16 bits so that line speeds above 65535 bps cannot be set. Use 32 bits for the rate while rejecting rates outside of [50,921600] to avoid having the 16-bit divisor overflow. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable@vger.kernel.org # 3.5 Cc: Bill Pemberton Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit b6b7c71cd0099ed5be55d618fccaf4ddf72e5222 Author: Jérémy Carrat Date: Thu Sep 10 18:26:09 2026 +0200 USB: serial: cp210x: add Corsair AX1500i Power Supply commit d84e27d87738634b92001500435ae4dadba10a13 upstream. The Corsair AX1500i power supply exposes its Corsair Link monitoring interface on a mini-USB port through an on-board CP2103, using a Corsair-specific product ID. Without the ID in the table no driver binds and no tty is created. Tested by forcing the driver association with echo 1b1c 1c02 > /sys/bus/usb-serial/drivers/cp210x/new_id and then setting the serial port to 115200 8N1. Adding the ID is sufficient to talk to the device: the tty reaches a USB-to-SMBus bridge sitting behind the UART, which identifies itself as "USB to SMB Bridge (Firmware by Ross Fosler)" version 0.9 and relays PMBus reads to the power supply controller. Input voltage and current, input and output power, internal temperature and fan speed were all read back on an AX1500i. [ 7.806181] usb 3-14: New USB device found, idVendor=1b1c, idProduct=1c02, bcdDevice= 1.00 [ 698.526754] usbcore: registered new interface driver cp210x [ 698.526767] usbserial: USB Serial support registered for cp210x [ 698.527863] cp210x 3-14:1.0: cp210x converter detected [ 698.529263] usb 3-14: cp210x converter now attached to ttyUSB0 The related AX1600i (1b1c:1c11, iProduct "USB API") is expected to be the same kind of device but has not been tested here, so it is not added. Cc: stable@vger.kernel.org Signed-off-by: Jérémy Carrat Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit de3297c8e521c0b0ddc89ece6fee84e25da9ecf0 Author: Yuqi Xu Date: Sat Sep 19 16:48:12 2026 +0800 wifi: mac80211: handle empty FILS association request payload commit 5bfd4b0b40b79781d900cb2f7da0685070f53c67 upstream. fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose last element is the FILS Session element. crypt_len is then zero and aes_siv_encrypt() is called with an empty plaintext. kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the unconditional sg_init_one() puts an invalid page into the scatterlist. With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf(); without the debug check the bogus page is handed to the crypto backend. AES-SIV is defined for empty plaintext and the S2V result is then the complete output, so handle this case before the CTR step, which has nothing to encrypt. Fixes: 39404feee691 ("mac80211: FILS AEAD protection for station mode association frames") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Signed-off-by: Yuqi Xu Reviewed-by: Ren Wei Link: https://patch.msgid.link/325c048982d637a3af80d74ac5b36e9369b93f1e.1789751126.git.xuyuqiabc@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 9c715919369a6bae12f03debfcf0716f5d8db1c1 Author: Zhao Li Date: Wed Sep 16 19:36:48 2026 +0800 wifi: mac80211: release mesh path quota on failed additions commit 7325a44474f20c1393a1c114c6811abce6ddfaf4 upstream. Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed. Fixes: ae76eef027f7 ("mac80211: return new mpath from mesh_path_add()") Fixes: 60854fd94573 ("mac80211: mesh: convert path table to rhashtable") Cc: stable@vger.kernel.org Assisted-by: LLM sparse kasan Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260916113649.28315-2-enderaoelyther@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 01292d4c491b9b78c23cde3c5eaa9fb8c8e241f8 Author: Zhao Li Date: Wed Sep 16 19:37:35 2026 +0800 wifi: mac80211: drain PS delivery work during station teardown commit 67a9e80c3ca20c9044cd6ee72cd6278dd19b5023 upstream. Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-lifetime window; driver callbacks during the remaining state transitions can still queue drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second drain at the start of __cleanup_single_sta(). That drain also covers insertion failures, which reach cleanup without setting sta->dead. Fixes: d34ba2168a3c ("mac80211: don't delay station destruction") Cc: stable@vger.kernel.org Assisted-by: LLM sparse smatch coccinelle kasan Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260916113735.31029-1-enderaoelyther@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 52990dd317f76c1baa3665e3b1513cf3d4b48f5e Author: Guangshuo Li Date: Wed Sep 16 15:37:36 2026 +0800 wifi: iwlegacy: 3945: free EEPROM data on remove commit f8ebe286394c0bbb4a6dbacb182a34ab6376922d upstream. il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection. Fixes: 073d3f5f1b3b ("iwlwifi: changing EEPROM layout handling") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Acked-by: Stanislaw Gruszka Link: https://patch.msgid.link/20260916073736.2952028-1-lgs201920130244@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 8e8e4d0b15f174d964a48b1c54dc8828e5ae87c5 Author: Tianchu Chen Date: Fri Sep 4 15:23:34 2026 +0000 wifi: cw1200: fix TX padding OOB read leaking heap data to device commit 7c1611780823b76219cb1478db53dfd890c4a9a2 upstream. The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion, in which case the frame is dropped like on the existing error paths of cw1200_tx(). Discovered by Atuin - Automated Vulnerability Discovery Engine. Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Tianchu Chen Link: https://patch.msgid.link/7982b4a7e64f74e2068790ec389ca680a081f730@linux.dev Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 08492853e0107aae11fcd9e2c7d870a84baec6b5 Author: Mehmet Fide Date: Tue Sep 1 09:39:06 2026 +0200 mtd: rawnand: vf610_nfc: fix reads on chips with more than 64 bytes of OOB commit 37adc9c5789c76db3b1ee7aeec3999b8503020d0 upstream. The controller transfers 64 spare bytes per page and the driver only implements the matching 64-byte ECC layout, so attach_chip() shrinks mtd->oobsize when the chip provides more. That clamp does not survive: nand_scan_tail() runs nanddev_init() after ->attach_chip(), and it restores mtd->oobsize from the memory organization, which still holds the value detected from the chip. The driver then transfers writesize plus the chip's full OOB size, the hardware ECC parity ends up at a different offset than the layout the controller was set up for, and every ECC-protected read fails with -EBADMSG. Measured on a Colibri VF61 (MX30LF4G28AC, 2048-byte pages, 112 bytes of OOB): with the clamp lost, UBI cannot read the erase counter headers of the pages U-Boot has just written, and the on-flash bad block table written by an older kernel reads back with ECC errors, so the board does not boot. Kernels before commit a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") are not affected because nothing overwrote the clamp there, which is why the same chip works with a v4.4 kernel and with U-Boot, whose copy of this driver has no memory organization to restore the value from. Edward Karpicz reported that the clamp no longer takes effect on this chip; see the link below. Instead of modifying the memory organization, keep the detected OOB size and give the driver its own mtd_ooblayout_ops: the same layout the NAND core uses for large pages, but computed on the first 64 OOB bytes instead of the whole OOB, so the ECC bytes stay where U-Boot and the old kernels put them. The data paths transfer writesize plus those 64 bytes, as the controller always has. Since mtd->oobsize now reports the chip's real spare size, fill the tail of oob_poi with 0xff after the 64 transferred bytes on ECC page reads: the core may copy the full mtd->oobsize from it, which would otherwise expose whatever the buffer held before. 0xff also matches what a raw read returns from flash, since the write path only ever programs the first 64 spare bytes. Reported-by: Edward Karpicz Link: https://community.toradex.com/t/colibri-vf50-vf61-on-the-current-bsp-mainline-u-boot-v2026-07-and-linux-6-18-lts/30735 Suggested-by: Miquel Raynal Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Cc: stable@vger.kernel.org Signed-off-by: Mehmet Fide Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 942274f94c1d547fb212de4403e9ee66443a9c86 Author: Runyu Xiao Date: Wed Sep 2 15:05:42 2026 +0800 mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ commit 21f027016b1290d13c30b198ae7a00e6b3d1d5a5 upstream. The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler. Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5 Signed-off-by: Runyu Xiao Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman commit 52c4294f3c26ec9db0e6f2e599096673d6f0f34d Author: Daehyeon Ko <4ncienth@gmail.com> Date: Tue Sep 15 11:19:56 2026 +0900 nvme-multipath: fix underflow in ANA log bounds checks commit 63fa2d9c9c37020bd2703fe2a6a38027b5abeb15 upstream. The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array. Fixes: 0d0b660f214d ("nvme: add ANA support") Cc: stable@vger.kernel.org Assisted-by: LLM Reviewed-by: Christoph Hellwig Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman commit e29e819cacfb4e3cd56d41eb704ab4718d6d2915 Author: Leon Hwang Date: Sat Oct 3 20:08:37 2026 -0400 kprobes: Skip disarmed probes when checking optkprobe overlap [ Upstream commit 7a39c732a22ec4a369af9e19fbe3d666ec83eec4 ] On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump. Link: https://lore.kernel.org/all/20260930053618.104498-1-leon.hwang@linux.dev/ Fixes: afd66255b9a4 ("kprobes: Introduce kprobes jump optimization") Cc: stable@vger.kernel.org Signed-off-by: Leon Hwang Signed-off-by: Masami Hiramatsu (Google) [ sashal: Adapted get_optimized_kprobe() to use unsigned long addresses with byte-wise scanning. ] Signed-off-by: Sasha Levin commit 8b93288b4543ad5139a25a5b211a07bf755652dd Author: Zhiling Zou Date: Sat Oct 3 20:33:19 2026 -0400 ipvs: bound LBLCR and LBLC cache growth [ Upstream commit 2a3c3de660f96865f303fd25f1285f2ffbfd521d ] ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Vega Suggested-by: Julian Anastasov Signed-off-by: Zhiling Zou Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso [ sashal: Retained kmalloc() instead of kmalloc_obj(). ] Signed-off-by: Sasha Levin commit 162bb126d5c07a0150a171f8f3f1996e445922b3 Author: Chandrashekar Devegowda Date: Tue Sep 22 12:10:20 2026 +0530 Bluetooth: btintel: fix buffer over-read in btintel_hw_error() commit 40eb4b18ad167b63644c27fa67a7400ba050379a upstream. The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1. Fixes: 973bb97e5aee ("Bluetooth: btintel: Add generic function for handling hardware errors") Cc: stable@vger.kernel.org Signed-off-by: Chandrashekar Devegowda Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 126714c495bf31a5e71411b8e0b65a685bb5e58d Author: Chengfeng Ye Date: Sun Sep 27 01:04:02 2026 +0800 Bluetooth: hci_core: Serialize ACL scheduling with channel deletion commit f4845ab191a4f686a5da481fbba90ed73bb693b0 upstream. hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission. Fixes: 3eff45eaf817 ("Bluetooth: convert tx_task to workqueue") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 3c73c261bc97058cb3df5e82229f35ac853c1e3f Author: Linmao Li Date: Tue Sep 22 10:01:41 2026 +0800 Bluetooth: hci_core: Fix inquiry cache timestamps on 64-bit systems commit 74847177eca5638827ab74cdf77f0b10fc40ca6c upstream. On 64-bit systems, outgoing BR/EDR connections always fall back to page scan repetition mode R2 with no clock offset once the system has been up for more than five minutes, even when inquiry found the peer only seconds earlier. This lengthens paging and can increase the risk of a Page Timeout. The inquiry cache stores jiffies in __u32 timestamps, but its age helpers subtract them from unsigned long jiffies. INITIAL_JIFFIES casts -300 * HZ through unsigned int, so jiffies crosses 2^32 five minutes after boot on 64-bit systems. Assigning it to __u32 then drops the upper 32 bits. In one trace, a 7.6-second-old entry (HZ=1000) was reported as 2^32 + 7620 ticks old and rejected by hci_acl_create_conn_sync(). hci_inquiry() is affected by the same truncation when checking the whole cache. 32-bit systems are unaffected because unsigned long is 32 bits wide there. Use unsigned long for both timestamps so they have the same width as jiffies on 32-bit and 64-bit systems, and update the debugfs format specifier accordingly. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Linmao Li Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit cd247e38b14df48d6b3940c4573a9f7acb10c363 Author: Chengfeng Ye Date: Sun Sep 27 01:27:23 2026 +0800 Bluetooth: RFCOMM: Fix initial port reference race commit 2d696c1ed3468dcb62578a3911e687110d463520 upstream. For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 88: rfcomm_dev_ioctl+0x8f6/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioctl+0x134/0x1c0 Freed by task 65: kfree+0x131/0x3c0 rfcomm_dev_destruct+0x23b/0x2f0 release_one_tty+0xc1/0x370 process_one_work+0x661/0x1090 Use test_and_set_bit() in both paths so that only the caller that changes RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path keeps its own lookup reference until release or TTY cleanup, preserving the existing callback ordering and error handling. Fixes: 80ea73378af4 ("Bluetooth: Fix unreleased rfcomm_dev reference") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Chengfeng Ye Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit b54976c81a6b8cae311b75be1a4cda444689bca0 Author: Xiang Mei Date: Fri Sep 18 15:57:53 2026 -0700 ALSA: ua101: reject mismatched capture/playback packet sizes commit 86f86e6fdedc33c5b8d38b9208b350f8accf57ee upstream. detect_usb_format() cross-checks bSubframeSize, bBitResolution and tSamFreq between the capture and playback interfaces, but never relates the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB gets a buffer of ua->playback.max_packet_bytes, while the number of bytes written into it is derived from the capture stream: capture_urb_complete() computes frames from the received capture packet and capture.frame_bytes, and start_usb_playback() and playback_work() multiply that by playback.frame_bytes. A device declaring a large capture wMaxPacketSize with few capture channels and a small playback wMaxPacketSize with many playback channels therefore memset()s and memcpy()s past the end of the playback buffer, in open() of the PCM node the driver registers during probe. usb_submit_urb() rejects the over-long iso_frame_desc[0].length with -EMSGSIZE, but only after the write. Reject such descriptors at probe time. Genuine UA-101/UA-1000 hardware declares proportional packet sizes and is unaffected. BUG: KASAN: slab-out-of-bounds in start_usb_playback (sound/usb/misc/ua101.c:586) Write of size 2048 at addr ffff8881098f3c00 by task exploit/5021 Call Trace: __asan_memset (mm/kasan/shadow.c:84) start_usb_playback (sound/usb/misc/ua101.c:586) playback_pcm_open (sound/usb/misc/ua101.c:679) snd_pcm_open_substream (sound/core/pcm_native.c:2829) snd_pcm_open (sound/core/pcm_native.c:2865 sound/core/pcm_native.c:2932) snd_pcm_playback_open (sound/core/pcm_native.c:2891) snd_open (sound/core/sound.c:166) chrdev_open (fs/char_dev.c:411) do_dentry_open (fs/open.c:996) vfs_open (fs/open.c:1101) path_openat (fs/namei.c:4837 fs/namei.c:5000) do_file_open (fs/namei.c:5029) do_sys_openat2 (fs/open.c:1417) __x64_sys_openat (fs/open.c:1423 fs/open.c:1439 fs/open.c:1434) do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the object at ffff8881098f3c00 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 0 bytes inside of allocated 168-byte region [ffff8881098f3c00, ffff8881098f3ca8) Cc: stable@vger.kernel.org Fixes: 63978ab3e3e9 ("sound: add Edirol UA-101 support") Reported-by: Assisted-by: LLM Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260918225753.1278505-1-xmei5@asu.edu Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6591c77d804839a61bb2b0fff546fc8836ca143c Author: Wentao Liang Date: Thu Sep 17 15:58:34 2026 +0000 serial: vt8500: Fix clock reference leak in vt8500_serial_probe() commit 9d8955281d9229a899e2041659a59b389027b711 upstream. of_clk_get() returns a clock with a reference that has to be released with clk_put(). If clk_prepare_enable() fails the function returns without doing so, leaking the reference. Add the missing clk_put() on that error path. Fixes: 12faa35ae5cb ("serial: vt8500: UART uses gated clock rather than 24Mhz reference") Cc: stable@kernel.org Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260917155834.2161361-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 7b2bbfb0a8670bfaacb724cb40c29cc6cd85cf3f Author: Simon Gassner Date: Thu Oct 1 08:05:39 2026 +0200 serial: tegra: don't clear the Tx FIFO on an Rx-only reset commit 8aebfde6e84dceb7d47fe8001e50b754eb45d5df upstream. tegra_uart_fifo_reset() applies the Tegra30 workaround for "cannot clear the Tx FIFO while FIFO mode is enabled" unconditionally: it leaves FIFO mode, writes the requested FCR clear bits, and re-enters FIFO mode. Leaving FIFO mode empties both FIFOs, so an Rx-only reset discards queued Tx data as well. The break handler in tegra_uart_decode_rx_error() calls it with UART_FCR_CLEAR_RCVR only. On a half-duplex RS485 board whose Rx line is pulled low while the transceiver drives the bus, every transmission raises a spurious break, and all but the first character of the frame is lost. Only take the FIFO-mode path when the caller actually asked for CLEAR_XMIT. Likewise only wait for TEMT in that case: with the Tx FIFO deliberately left intact, that loop would otherwise spin for a full frame time in hard IRQ context with the port lock held. Tested on a Colibri T30 (Tegra30) with Rx DMA: - Break during transmission: the reset still fires from tegra_uart_decode_rx_error(), and the complete frame now reaches the peer. Before this change only the character in the shift register was sent. - Internal loopback with a generated break: the Rx FIFO is correctly cleared by the plain FCR write, and subsequent receive works with no frame, parity or overrun errors. Fixes: e9ea096dd225 ("serial: tegra: add serial driver") Cc: stable@kernel.org Signed-off-by: Simon Gassner Link: https://patch.msgid.link/20261001060539.32659-1-simon.gassner@noxsystems.com Signed-off-by: Greg Kroah-Hartman commit 11cd66087d3f629c5f07ddd1ee1dd815f82afa33 Author: Viken Dadhaniya Date: Tue Sep 15 18:56:28 2026 +0530 tty: serial: qcom_geni_serial: Keep console RX functional after deep idle commit 63ef71d1474b5417b5b2dec700cd251c44a570d9 upstream. At baud rates up to 115200, the serial console uses only a 1 kBps keepalive vote for the GENI_TO_CORE ("qup-core") ICC path. This vote keeps the path active but does not request a QUP Core 2X clock rate. When the CPU enters a deeper idle state, the missing Core clock vote can leave the console RX path unresponsive. Use the 19.2 MHz Core 2X vote at low baud rates, while retaining the 50 MHz vote at higher baud rates, so that console RX remains functional after deep idle transitions. Fixes: 7cf563b2c846 ("tty: serial: qcom_geni_serial: Add interconnect support") Cc: stable@kernel.org Reviewed-by: Konrad Dybcio Signed-off-by: Viken Dadhaniya Link: https://patch.msgid.link/20260915-correct-icc-bandwidth-vote-constants-v2-2-f78eb611204e@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman commit b0ad9d025c3229a628a82fbaa7578891075a950d Author: Joshua Rogers Date: Mon Aug 3 16:10:55 2026 +0200 tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup commit 03b49c991abb8d021ca6fe51cd173447236b0552 upstream. vcc_cleanup() sets port->tty to NULL without holding port->lock, racing with vcc_event() LDC callbacks that read port->tty under port->lock and then use tty->port. This can cause a use-after-free when the callback dereferences tty->port after cleanup has already destroyed and freed it. Assisted-by: AISLE:Snapshot Cc: stable Signed-off-by: Joshua Rogers Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20260803-aisle-tty-vcc-v2-2-a50bc9b15193@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 9e2eedb3611c1a3a377105cb26af52731e826fa5 Author: Joshua Rogers Date: Mon Aug 3 16:10:54 2026 +0200 tty: vcc: zero-initialize control packet in vcc_send_ctl() commit 1f71f565e3585da1098ff19ca3c24687dab59185 upstream. The stack-allocated struct vio_vcc pkt was partially initialized, leaving the tag.stype_env field uninitialized before being sent via ldc_write(), potentially leaking kernel stack data to the LDC peer. Assisted-by: AISLE:Snapshot Cc: stable Signed-off-by: Joshua Rogers Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20260803-aisle-tty-vcc-v2-1-a50bc9b15193@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman commit 9bfa5965e570be2a9b0f306e5c6012dc1b345e70 Author: Johan Hovold Date: Fri Sep 11 11:01:32 2026 +0200 tty: amiserial: fix broken TIOCMIWAIT commit 615f35fd5aee169cc4881a8594f2fa234a4d0bb8 upstream. A change replacing interruptible_sleep_on() inadvertently broke the TIOCMIWAIT implementation which now immediately returns -EIO (unless there is a racing modem status update). Replace the old hangup (and signal) detection with a check for the TTY_IO_ERROR flag which is set on hangup. Fixes: 591cee0a3563 ("tty/amiserial: avoid interruptible_sleep_on") Reported-by: sashiko-bot@kernel.org Link: https://lore.kernel.org/20260910132029.D80801F00898@smtp.kernel.org Cc: stable@kernel.org # 3.14 Cc: Arnd Bergmann Signed-off-by: Johan Hovold Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20260911090132.723531-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 399b18b18f54495eeeda8d88e039e6af27d020c9 Author: Jie Deng Date: Mon Aug 10 10:36:26 2026 +0800 usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe commit e5052f2c5c73c1dcca42bafc0bc737af2b2af059 upstream. The Cadence USBSS controller is a two-function PCI device. The first probed function allocates the driver data and stores it with pci_set_drvdata(), while the second function reuses it via pci_get_drvdata() when pci_is_enabled() reports that the first function has already been probed. When the second function is probed while the first one has been enabled but has not yet set its driver data, pci_get_drvdata() returns NULL, and the subsequent wrap->devfn assignment dereferences a NULL pointer and crashes the kernel. logs: Call trace: cdns3_pci_probe+0xa4/0x300 local_pci_probe+0x44/0xa8 pci_call_probe+0x54/0x158 pci_device_probe+0x84/0x100 really_probe+0x184/0x3d0 __driver_probe_device+0x80/0x178 driver_probe_device+0x44/0xe8 __driver_attach+0xec/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x28/0x38 bus_add_driver+0x110/0x238 driver_register+0x64/0x128 __pci_register_driver+0x50/0x60 cdns3_pci_driver_init+0x28/0x38 do_one_initcall+0x5c/0x280 do_initcalls+0x104/0x1d8 kernel_init_freeable+0x140/0x218 kernel_init+0x28/0x1f8 ret_from_fork+0x10/0x20 Return -EPROBE_DEFER in this case so that probing is retried after the first function has completed its probe. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Signed-off-by: Jie Deng Acked-by: Peter Chen Link: https://patch.msgid.link/20260810023626.70669-1-dengjie03@kylinos.cn Signed-off-by: Greg Kroah-Hartman commit 5fdc0bca7959254a93e3872905f9c2a3cd6d0fdc Author: Jameson Thies Date: Thu Sep 17 03:20:08 2026 +0000 usb: typec: ucsi: displayport: Current CAM OOB index fixup commit ea31c6498c61307dc0d8ce338a7f268cb8cbdd57 upstream. Update ucsi_displayport_enter() to return invalid error when the PPM reports an current alternate mode greater than or equal to UCSI_MAX_ALTMODES. While here, remove 0xff current cam assignment on failed GET_CURRENT_CAM response. Fixes: 04cec690b1fd ("usb: typec: ucsi: displayport: Fix OOB altmode array index") Cc: stable Reviewed-by: Heikki Krogerus Reviewed-by: Benson Leung Signed-off-by: Jameson Thies Link: https://patch.msgid.link/20260917032008.1701888-1-jthies@google.com Signed-off-by: Greg Kroah-Hartman commit a55a18ceae90c0f65d298d0916112bcffb5f67c1 Author: Prashanth K Date: Wed Sep 16 09:58:08 2026 +0530 usb: typec: ucsi: Get the connector fwnode based on reg value commit 6c51f09c6db5868a5090e8dd4d7764660c87f1ad upstream. ucsi_find_fwnode() currently maps UCSI connectors to Device tree connector nodes based on the order in which connector child nodes are described in DT. This can fail because the ordering of child nodes isn't guaranteed in Device-tree. For example, DTB may contain connector@1 before connector@0, causing connector numbers to be associated with the wrong fwnode. As a result, role switch and Type-C notifications can be delivered to the wrong remote endpoints. Fix this by using the "reg" property of each connector to match its corresponding fwnode. While at it, if the reg property isn't present, then fall back to the old method. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: stable Signed-off-by: Prashanth K Reviewed-by: Heikki Krogerus Link: https://patch.msgid.link/20260916042808.2879079-1-prashanth.k@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman commit 59d2c9d70fa42e2290ff68e6430d38a1c817fcb7 Author: Hui Peng Date: Sun Sep 20 23:17:02 2026 +0000 usb: core: clear both ep_in and ep_out for non-ep0 control endpoints commit 0e8baa78d872f2db440d8b9ded946ab8dceb89eb upstream. In usb_enable_endpoint(), non-zero control endpoints (where usb_endpoint_xfer_control(&ep->desc) is true) populate both dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct usb_host_endpoint pointer. However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or dev->ep_in[epnum] depending on the direction bit of epaddr when reset_hardware is set, leaving the opposite direction's array slot pointing to the disabled/freed endpoint. Clear both dev->ep_out[epnum] and dev->ep_in[epnum] when disabling a non-ep0 control endpoint with reset_hardware set, and update the function kerneldoc accordingly. Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget to enumerate a USB device with a non-zero control endpoint (bEndpointAddress 0x01, bmAttributes USB_ENDPOINT_XFER_CONTROL), verifying that both dev->ep_in[1] and dev->ep_out[1] are cleared when the interface is disabled. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Assisted-by: LLM Signed-off-by: Hui Peng Acked-by: Alan Stern Link: https://patch.msgid.link/20260920231702.110963-1-benquike@gmail.com Signed-off-by: Greg Kroah-Hartman commit c5f452e057df6ef89300523d13ad6833bfd199cd Author: Yuchao Zhang Date: Fri Sep 18 08:54:38 2026 +0800 usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC commit 9cd072788c76595529eb38f42bf94d23852f8534 upstream. When user space sets up FunctionFS with only full-speed descriptors (e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER), config_ep_by_speed() detects that the function lacks descriptors for the current speed, logs a warning, and falls back to full-speed descriptors. The endpoint is then successfully enabled via usb_ep_enable(), and epfile->ep becomes valid. However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_DESC ioctl to query the endpoint descriptor, ffs_epfile_ioctl() selects the descriptor index solely based on gadget->speed: switch (epfile->ffs->gadget->speed) { case USB_SPEED_SUPER: case USB_SPEED_SUPER_PLUS: desc_idx = 2; break; case USB_SPEED_HIGH: desc_idx = 1; break; default: desc_idx = 0; } desc = epfile->ep->descs[desc_idx]; memcpy(&desc1, desc, desc->bLength); Because user space only supplied full-speed descriptors, epfile->ep->descs[1] is NULL. Dereferencing desc->bLength triggers an immediate kernel NULL pointer dereference panic. Fix this by falling back through lower speed descriptors if the current speed descriptor was not supplied, matching the fallback logic in config_ep_by_speed() and historical f_fs behavior. If still missing, fall back to epfile->ep->ep->desc (the active descriptor), and return -EINVAL safely if no valid descriptor is found. In addition, mark desc as const to match struct usb_ep::desc and avoid discarding qualifiers. Fixes: c559a3534109 ("usb: gadget: f_fs: add ioctl returning ep descriptor") Cc: stable@kernel.org Signed-off-by: Yuchao Zhang Acked-by: Michał Nazarewicz Link: https://patch.msgid.link/20260918005438.81263-2-ndaugoing@gmail.com Signed-off-by: Greg Kroah-Hartman commit 32721319e89a2be610b0518b88f0d188ce878063 Author: Alan Stern Date: Sun Sep 20 17:37:34 2026 -0400 USB: gadget: dummy-hcd: Fix wait for outstanding request completions commit b263ff9b0fc5c1f371d65c4eb196b31263d039ff upstream. The dummy-hcd driver emulates synchronize_irq() by waiting until its private callback_usage counter drops to 0 (with the private lock not held). This counter is incremented whenever a gadget driver callback occurs (which requires the private lock to be dropped), but not when a request completion handler is called. This is an oversight. Request completion is triggered by timer interrupts (emulating device IRQs in a real UDC), and the interrupt handlers are supposed to have completed when the synchronize_irq() emulation routine returns -- they aren't supposed to be in the middle of a completion callback. If this happens it can lead to a gadget driver's unbind routine running before all outstanding request completions have finished, maybe even allowing the gadget driver's module to be unloaded while a completion handler is still running. Fix the oversight by incrementing the callback_usage value across request completion callbacks. Link: https://lore.kernel.org/linux-usb/7a87e293-633c-4100-aa8d-91560ba5e5c5@rowland.harvard.edu/ Fixes: 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change") Tested-by: Minseo Kim Signed-off-by: Alan Stern Cc: stable Link: https://patch.msgid.link/f23b9e1a-f110-441a-a1d8-95f442ec09d5@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman commit 89b3fef8809ec1a9acf5f753eb89b9508d7e4466 Author: Fan Wu Date: Tue Sep 8 04:17:39 2026 +0000 usb: gadget: aspeed-vhub: cancel wake work on device removal commit 20388c8d1d74c203fec8194c45cd31afdfab934e upstream. wake_work is armed from the gadget .wakeup callback to resume suspended downstream ports, and it is never cancelled in ast_vhub_remove(), so a work item queued before or during removal can run after devm has freed vhub and its ports, a use-after-free. Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes no lock and the unbind path never clears wakeup_en, so a remote-wakeup request in flight on another CPU can re-arm the work after the cancel and before vhub is freed. ast_vhub_del_dev() already clears d->registered under vhub->lock before unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup() once d->registered is clear: the check and the schedule_work() are then atomic against the unbind, so a wakeup that passed before the flag was cleared is drained by the cancel_work_sync() after the del_dev loop, and one that arrives later returns without arming. Also move INIT_WORK() to the top of ast_vhub_probe(), since the probe error path reuses ast_vhub_remove() and would otherwise cancel a never-initialized work item. This issue was found by an in-house static analysis tool. Fixes: 7ecca2a4080c ("usb/gadget: Add driver for Aspeed SoC virtual hub") Cc: stable@kernel.org Assisted-by: Codex:gpt-5.6 Co-developed-by: Song Li Signed-off-by: Song Li Signed-off-by: Fan Wu Reviewed-by: Benjamin Herrenschmidt Link: https://patch.msgid.link/20260908041740.613713-1-fanwu01@zju.edu.cn Signed-off-by: Greg Kroah-Hartman commit 3e655ebe0e45b7b026a4d3e6c10586b95164b3fd Author: Liu Chao Date: Mon Sep 21 15:25:51 2026 +0800 usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd commit 9062d50e75c24dc7911be05c9b1719b3b256af15 upstream. generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbitrary bRequest value, triggering the out-of-bounds access from an IRQ completion handler with no further preconditions. Add an ARRAY_SIZE() guard to both functions. Fixes: c47d7b09891a ("USB: audio: add USB audio class definitions") Cc: stable Reviewed-by: Weibin Liu Signed-off-by: Liu Chao Reviewed-by: Ivy Lopez Link: https://patch.msgid.link/20260921072551.3708191-1-liuc63@xiaopeng.com Signed-off-by: Greg Kroah-Hartman commit 08c92819e61176f6615fa7ebf5ca1050e2cce5e8 Author: Myeonghun Pak Date: Mon Sep 14 21:20:11 2026 -0400 usb: ohci-st: disable controller wakeup on removal commit 08b2ccd7eb7e41f77a04a09112ca3edcc588e3f0 upstream. Probe enables controller wakeup after the OHCI core marks controllers with RemoteWakeupConnected as wakeup-capable. Removal does not undo this, so the wakeup source can remain attached after driver unbind. Disable controller wakeup after removing the HCD. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: d115837259ad ("usb: host: ohci-st: Add OHCI driver support for ST STB devices") Cc: stable Assisted-by: LLM Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Reviewed-by: Patrice Chotard Acked-by: Alan Stern Link: https://patch.msgid.link/20260915012011.61874-5-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman commit 0a6a6fb49c59400ea9325897408be985ef067835 Author: Myeonghun Pak Date: Mon Sep 14 21:20:09 2026 -0400 usb: ohci-s3c2410: disable controller wakeup on removal commit 8dd8451c527e2a723bca20da5a6d724b8592551f upstream. Probe enables controller wakeup after the OHCI core marks controllers with RemoteWakeupConnected as wakeup-capable. Removal does not undo this, so the wakeup source can remain attached after driver unbind. Disable controller wakeup after removing the HCD. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: a6eeeb9f45b5 ("USB: Update USB default wakeup settings") Cc: stable Assisted-by: LLM Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Acked-by: Alan Stern Link: https://patch.msgid.link/20260915012011.61874-3-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman commit 30a4ebd3e20603b2f2c9662605bf7a1e8ee330fd Author: Myeonghun Pak Date: Mon Sep 14 21:20:08 2026 -0400 usb: ohci-da8xx: disable controller wakeup on cleanup commit 901197dd4c7dcffbf97426487d4c047555c98554 upstream. The OHCI core marks controllers with RemoteWakeupConnected as wakeup-capable. Probe enables wakeup, but neither removal nor a later notifier registration failure disables it, leaving the wakeup source attached. Disable controller wakeup after removing the HCD on both paths. This issue was identified during our ongoing static-analysis research while reviewing kernel code. Fixes: a6eeeb9f45b5 ("USB: Update USB default wakeup settings") Cc: stable Assisted-by: LLM Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Signed-off-by: Myeonghun Pak Acked-by: Alan Stern Link: https://patch.msgid.link/20260915012011.61874-2-mhun512@gmail.com Signed-off-by: Greg Kroah-Hartman commit ff21323b74a876c54b1ebe9e5f8ba5abc7e07fd3 Author: Lovekesh Solanki Date: Thu Sep 3 16:59:03 2026 +0530 usb: hub: use shorter 120ms post resume hold for SS root hubs commit 29480b05e6e226594dc11ccf2a036fbd5cdd0e42 upstream. Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for. Reported-by: Mathieu Fluhr Link: https://lore.kernel.org/all/CAPyJwA_D9qw0T72f8zwM1yKjP+To=maVANbcdsWM7yRmbBxYvw@mail.gmail.com/ Cc: stable Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") Signed-off-by: Lovekesh Solanki Acked-by: Mathias Nyman Link: https://patch.msgid.link/20260903112903.542719-1-lovekeshsolanki00@gmail.com Signed-off-by: Greg Kroah-Hartman commit 353ca2623104a3baf5642c3ea31569df04ce4aaf Author: Syed Labeeq Sajid Bukhari Date: Thu Sep 10 19:03:43 2026 +0500 usb: storage: sierra_ms: reject short SWoC info transfers commit 8a0200d14acd9db388b85cd016e68a4e60d900ec upstream. sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes from the device via usb_control_msg(), but its callers only treat a negative return value as failure. A device that answers the vendor-specific GetSwocInfo request with a short IN transfer is therefore accepted, leaving the tail of the freshly allocated (kmalloc(), non-zeroing) swoc_info buffer uninitialized. truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU and swocInfo->LinuxVer from that buffer into the world-readable (0444) "truinst" sysfs attribute. An emulated/malicious USB device (VID 0x1199, PID 0x0fff) can exploit this to disclose up to 5 bytes of stale kernel heap memory (kmalloc-64) to unprivileged userspace, once per sysfs read, indefinitely. On kernels built without init_on_alloc this leaks recently freed heap contents. Only accept the transfer when the full structure was received. sierra_ms_init() already retries failed queries, so well-behaved devices are unaffected. Fixes: 32fe5e393455 ("USB Storage Sierra: TRU-Install feature update") Cc: stable Signed-off-by: Syed Labeeq Sajid Bukhari Assisted-by: Kimi:K2 [Kimi Code CLI] Link: https://patch.msgid.link/20260910140343.49371-1-syedlabeeq@gmail.com Signed-off-by: Greg Kroah-Hartman commit 8ed69d299b9d7872f911f089e00cdd2ea6969d2c Author: Johan Hovold Date: Fri Aug 21 17:45:43 2026 +0200 USB: serial: fix port tear down use-after-free commit 33c920f7c5952dfc42d1b8ea6efe16b1f0bb0c5b upstream. Some drivers for multiport devices access port driver data from completion handlers of shared URBs submitted at attach() or first open() and stopped at disconnect() or last close(), respectively. A simple NULL check before accessing the driver data makes sure that a port state container has at least been allocated, but a completion handler can still race with port tear down. Reorder the disconnect handling so that ports are not deregistered (and their driver data freed) until after all ports have been hung up and the driver disconnect() callback has run so that all I/O has been stopped. Fixes: 2d93148ab698 ("USB: serial: fix lifetime and locking problems") Reported-by: syzbot+e5e28c3e953b2eebb16e@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/6a7e6fb9.ec5dc6cc.21cb3f.00c0.GAE@google.com/ Cc: stable@vger.kernel.org # 2.6.30 Cc: Alan Stern Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 134ef30a62624b10689ced3f9728823fe29fceff Author: Johan Hovold Date: Mon Sep 7 11:51:30 2026 +0200 USB: cdc-acm: fix racy TIOCMIWAIT implementation commit be4219dd98608736e13e0b790ef742b76a13254d upstream. Check the wakeup condition after adding the task to the waitqueue and updating the task state to avoid missing a racing modem status update or disconnect. Store the old icount on entry and do not update it in the completion handler to avoid missing events or reporting spurious ones (due to modem status changes before TIOCMIWAIT was called). Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable Cc: Oliver Neukum Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260907095130.130636-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 718965a5fcea47f7ec6accff55306317aadc3af3 Author: Yuxiao Wang Date: Wed Sep 9 12:44:00 2026 +0000 nitro_enclaves: fix use-after-free on SLOT_ALLOC failure commit 9bc184a2eda8b773c88ecbff934001ad649b9cc1 upstream. When ne_create_vm_ioctl() fails the SLOT_ALLOC request after anon_inode_getfile() has succeeded, the error path calls fput(enclave_file) and then frees ne_enclave. In normal userspace context, fput() defers the final __fput() via task_work. ne_enclave_release() therefore runs after ne_enclave has already been freed and dereferences ne_enclave->slot_uid, causing a use-after-free: KASAN: slab-use-after-free in ne_enclave_release. The enclave has no slot allocated and is not yet linked into the enclaves list on this error path, so ne_enclave_release() is expected to return early when slot_uid is zero. However, reading slot_uid already accesses the freed object. Clear enclave_file->private_data before fput() on the error path. ne_enclave_release() then returns immediately when private_data is NULL, leaving the ioctl error path as the sole owner of ne_enclave. This is safe because the file has not been fd_install()'d yet. Tested on an AWS EC2 m5.2xlarge with CONFIG_KASAN=y. Without the patch, the reproducer triggers a KASAN slab-use-after-free on every SLOT_ALLOC failure. With the patch, no KASAN report is produced and the SLOT_ALLOC error is still returned. Normal enclave creation and teardown are unaffected. Fixes: 9c8eb50fe9e2 ("nitro_enclaves: Add logic for terminating an enclave") Cc: stable@vger.kernel.org Co-developed-by: Zhaofeng Chen Signed-off-by: Zhaofeng Chen Signed-off-by: Yuxiao Wang Reviewed-by: Alexander Graf Link: https://patch.msgid.link/20260909124400.27857-1-graf@amazon.com Signed-off-by: Greg Kroah-Hartman commit 3e0e521c4967c93710d5643860d41b0415a1bada Author: Raphaël Larocque Date: Sat Sep 26 20:58:10 2026 -0400 Input: synaptics - limit T440p InterTouch quirk to LEN0036 commit f0fd8993082ca229faa3f9844f1c9fe182eca20b upstream. The ThinkPad L440 also uses board id 2722, but does not have the SMBus initialization problem seen on the T440p. On the L440, the SMBus companion becomes available shortly after psmouse probes, allowing the touchpad to use SMBus/RMI4 normally. The T440p's quirk is currently applied to all Synaptics touchpads with board id 2722, unnecessarily disabling SMBus InterTouch on the L440, as reported by Daniel Salmun. Restrict the quirk to PNP ID LEN0036, which identifies the T440p, so that other devices sharing board id 2722 retain their normal SMBus/RMI4 operation. Reported-by: Daniel Salmun Link: https://lore.kernel.org/all/20260925230039.236786-1-salmundani@gmail.com/ Fixes: 26eb3d92c7a4 ("Input: synaptics - disable InterTouch on ThinkPad T440p (board id 2722)") Cc: stable@vger.kernel.org Signed-off-by: Raphaël Larocque Link: https://patch.msgid.link/20260927005810.85971-1-rlarocque@disroot.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 70d61e515e1453961de8bc31ff924ffbf19526d5 Author: Lovekesh Solanki Date: Mon Sep 21 01:37:30 2026 +0530 Input: synaptics - add LEN205b entry to smbus_pnp_ids for ThinkPad T490 commit a961417c5ae77bbb728a23d9577ecd8f4d8a4b5a upstream. Lenovo ThinkPad T490 has a Synaptics Touchpad that supports SMBus/RMI4 mode, but is not listed in smbus_pnp_ids table. Add LEN205b to smbus_pnp_ids[] passlist. Reported-by: John Rosencutter Closes: https://lore.kernel.org/all/CAOGuaRh025eKcBf9P8UrvtXNp68vQ0HVF2EbNMp-kpdaC1HNpA@mail.gmail.com/ Signed-off-by: Lovekesh Solanki Link: https://patch.msgid.link/20260920200730.1836756-1-lovekeshsolanki00@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 655fd4cceddc5cc09d117d75b169ee092815fdfb Author: Lovekesh Solanki Date: Sun Sep 20 17:05:41 2026 +0530 Input: i8042 - add nomux quirk for Fujitsu LIFEBOOK U7410 commit 495cd7f858b45d2ffa9b685bba3a8c23c1ca4dd3 upstream. On the Fujitsu LIFEBOOK U7410 the internal keyboard and touchpad die shortly after boot if i8042 multiplexing controller is probed and switched to muxed mode. These multiplexing setup commands disturb the EC emulated keyboard and atkbd reports "Spurious ACK" and "Unknown key pressed" warnings, after which both keyboard and touchpad stop delivering events. Both touchpad and keyboard work in BIOS and GRUB. Disabling multiplexer using i8042.nomux=1 makes both devices work on warm/cold boot. Add a DMI quirk to force nomux mode for this model. Reported-by: Heiko Brey Link: https://lore.kernel.org/all/89f36f3f5e4c2d07b9ff72bc0b355875c336e498.camel@gmx.de/ Signed-off-by: Lovekesh Solanki Link: https://patch.msgid.link/20260920113541.1484808-1-lovekeshsolanki00@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 29dcfb86571f93e5291c8f10b9783d3768e2326d Author: Martino Papero Date: Wed Sep 30 22:10:41 2026 +0200 Input: atkbd - skip deactivate for Lenovo IdeaPad Slim 3 15IWC11 commit 3bf8d603fd45649c106cae6290a10f20b1bbb569 upstream. The internal keyboard on the Lenovo IdeaPad Slim 3 15IWC11 (83RR) does not work correctly with the default i8042 settings. Using i8042.nopnp=1 and i8042.dumbkbd=1 restores keyboard input, but prevents the Caps Lock LED from working. Using i8042.nopnp=1 alone does not fix the keyboard. The laptop works correctly when atkbd_deactivate_fixup is used instead. Add a DMI quirk for the 83RR to enable it. This was tested without any i8042 command-line parameters. Keyboard input and the Caps Lock LED work correctly, including after suspend and resume and after a cold boot. Link: https://lore.kernel.org/all/4f43465f-98ba-4722-8e29-03df20315369@kernel.org/ Signed-off-by: Martino Papero Reviewed-by: Hans de Goede Link: https://patch.msgid.link/c0b597b8-e7ad-4fba-a2bb-5d252e3dfbd3@lcb.to.it Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit de47d7555454ed5ddf9e93bf424f7cd122148072 Author: Wentao Liang Date: Thu Sep 17 15:55:23 2026 +0000 kgdboc: Fix tty driver reference leak in configure_kgdboc() commit ef3134cd0d4831ae2137aee2883987859b80b2c6 upstream. tty_find_polling_driver() returns the tty driver with an extra reference taken by tty_driver_kref_get(). configure_kgdboc() stores it in kgdb_tty_driver but the reference is never dropped: it is leaked when kgdb_register_io_module() fails, when the configuration is cleared, and on every reconfigure. Release the reference both when unconfiguring and on the error path. Fixes: 7d7b93c1452f ("tty: kref the tty driver object") Cc: stable@kernel.org Signed-off-by: Wentao Liang Reviewed-by: Douglas Anderson Link: https://patch.msgid.link/20260917155523.2161202-1-vulab@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman commit 5acb35d9f1f1eb451f45430dd54807e60026a177 Author: Imre Kaloz Date: Sun Sep 27 16:55:04 2026 +0200 drm/radeon: Read the VRAM VBIOS signature with readb() commit de1eab13efef83fd2b76f4688de5bf672644596f upstream. igp_read_bios_from_vram() checked bios[0]/bios[1] with a plain __iomem load, which faults on sparc64 before the copy runs at all. radeon_read_bios() already reads its two signature bytes with readb() ahead of its own copy; use the same accessor here, keeping the check before the allocation. Fixes: b442962a9e82 ("drm/radeon/kms: add support for "Surround View"") Signed-off-by: Imre Kaloz Signed-off-by: Alex Deucher (cherry picked from commit 09155b8932e5013dbce0f5cdff7d75264a279ee5) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit cd79f425fecf66eb4beded8662dddb5d821ae4e7 Author: Nikola Prica Date: Mon Sep 21 13:19:03 2026 +0200 PCI: Accept AtomicOps already enabled by the hypervisor [ Upstream commit 40cce45b921f7930886bcba43069edc579725457 ] pci_enable_atomic_ops_to_root() currently fails when no Root Port is visible. That is common in passthrough guests (ESXi, Hyper-V): the Endpoint is assigned to the VM, but the Root Port above it is not visible in the guest topology. In those setups the hypervisor may already have enabled AtomicOp Requester Enable on the device. If PCI_EXP_DEVCTL2_ATOMIC_REQ is set, treat AtomicOps as already enabled and return success instead of failing the Root Port walk. After 1ae8c4ce1570 ("PCI: Enable AtomicOps only if Root Port supports them"), pci_enable_atomic_ops_to_root() always returns failure if the Root Port is not visible, so drivers don't use atomics when they could. On systems where the Root Port is not visible but *does* support AtomicOps, this is a regression: prior to 1ae8c4ce1570, it enabled AtomicOps in the endpoint and returned success. Fixes: 1ae8c4ce1570 ("PCI: Enable AtomicOps only if Root Port supports them") Signed-off-by: Nikola Prica [bhelgaas: commit log, code comment] Signed-off-by: Bjorn Helgaas Tested-by: Gerd Bayer Reviewed-by: Christian König Reviewed-by: Gerd Bayer Link: https://patch.msgid.link/20260921111903.978687-1-nikprica@amd.com Signed-off-by: Sasha Levin commit 8167771430a886044f6e6feac4451f0f9985d41f Author: Hongjian Dai Date: Wed Sep 30 00:43:40 2026 +0800 i2c: at91: release DMA channels when probe defers [ Upstream commit c98bf3b86609a18ab16d067280257326e557c636 ] at91_twi_probe_master() can return -EPROBE_DEFER from at91_init_twi_recovery_info() after at91_twi_configure_dma() has already claimed the tx/rx DMA channels. at91_twi_probe() then returns without releasing them, and since dma_request_chan() is not devres-managed the channels leak on every deferred probe attempt. Release the channels before deferring the probe. Fixes: f7eeb1af8537 ("i2c: at91: release DMA channels on remove and probe error") Assisted-by: LLM Signed-off-by: Hongjian Dai Signed-off-by: Andi Shyti Link: https://patch.msgid.link/7D85C6CB6BF0A82E+20260929164340.41628-1-daihongjian@kylinsec.com.cn Signed-off-by: Sasha Levin commit de83419b5062a6f83bb9421be77cae734cbead65 Author: Eric Dumazet Date: Mon Sep 28 19:45:24 2026 +0000 ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() [ Upstream commit 8ec454dcd00ce3375119111c6394964455b36d0d ] Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431 seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681 seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744 lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356 dst_output include/net/dst.h:470 [inline] ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131 iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97 udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187 tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202 tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274 tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576 tipc_enable_bearer net/tipc/bearer.c:366 [inline] __tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048 tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057 genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") Reported-by: syzbot+9408fbe0e6452a12e9ab@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6abac2eb.3654fce1.1bec97.0000.GAE@google.com/ Signed-off-by: Eric Dumazet Reviewed-by: Xuanqiang Luo Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260928194524.3617299-1-edumazet@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 1827e34ea7a356f0c97ade1eaf1c52fef045a22a Author: Florian Westphal Date: Sun Jun 9 00:10:39 2024 +0200 net: add and use skb_get_hash_net [ Upstream commit b975d3ee5962237c1e2f5d5aeeaaf0dc2173486c ] Years ago flow dissector gained ability to delegate flow dissection to a bpf program, scoped per netns. Unfortunately, skb_get_hash() only gets an sk_buff argument instead of both net+skb. This means the flow dissector needs to obtain the netns pointer from somewhere else. The netns is derived from skb->dev, and if that is not available, from skb->sk. If neither is set, we hit a (benign) WARN_ON_ONCE(). Trying both dev and sk covers most cases, but not all, as recently reported by Christoph Paasch. In case of nf-generated tcp reset, both sk and dev are NULL: WARNING: .. net/core/flow_dissector.c:1104 skb_flow_dissect_flow_keys include/linux/skbuff.h:1536 [inline] skb_get_hash include/linux/skbuff.h:1578 [inline] nft_trace_init+0x7d/0x120 net/netfilter/nf_tables_trace.c:320 nft_do_chain+0xb26/0xb90 net/netfilter/nf_tables_core.c:268 nft_do_chain_ipv4+0x7a/0xa0 net/netfilter/nft_chain_filter.c:23 nf_hook_slow+0x57/0x160 net/netfilter/core.c:626 __ip_local_out+0x21d/0x260 net/ipv4/ip_output.c:118 ip_local_out+0x26/0x1e0 net/ipv4/ip_output.c:127 nf_send_reset+0x58c/0x700 net/ipv4/netfilter/nf_reject_ipv4.c:308 nft_reject_ipv4_eval+0x53/0x90 net/ipv4/netfilter/nft_reject_ipv4.c:30 [..] syzkaller did something like this: table inet filter { chain input { type filter hook input priority filter; policy accept; meta nftrace set 1 tcp dport 42 reject with tcp reset } chain output { type filter hook output priority filter; policy accept; # empty chain is enough } } ... then sends a tcp packet to port 42. Initial attempt to simply set skb->dev from nf_reject_ipv4 doesn't cover all cases: skbs generated via ipv4 igmp_send_report trigger similar splat. Moreover, Pablo Neira found that nft_hash.c uses __skb_get_hash_symmetric() which would trigger same warn splat for such skbs. Lets allow callers to pass the current netns explicitly. The nf_trace infrastructure is adjusted to use the new helper. __skb_get_hash_symmetric is handled in the next patch. Reported-by: Christoph Paasch Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/494 Reviewed-by: Willem de Bruijn Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240608221057.16070-2-fw@strlen.de Signed-off-by: Jakub Kicinski Stable-dep-of: 8ec454dcd00c ("ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()") Signed-off-by: Sasha Levin commit 348218a4601e93de4d1e9fab29837cf656e4bf99 Author: Florian Westphal Date: Wed Jun 22 16:43:57 2022 +0200 netfilter: nf_tables: avoid skb access on nf_stolen [ Upstream commit e34b9ed96ce3b06c79bf884009b16961ca478f87 ] When verdict is NF_STOLEN, the skb might have been freed. When tracing is enabled, this can result in a use-after-free: 1. access to skb->nf_trace 2. access to skb->mark 3. computation of trace id 4. dump of packet payload To avoid 1, keep a cached copy of skb->nf_trace in the trace state struct. Refresh this copy whenever verdict is != STOLEN. Avoid 2 by skipping skb->mark access if verdict is STOLEN. 3 is avoided by precomputing the trace id. Only dump the packet when verdict is not "STOLEN". Reported-by: Pablo Neira Ayuso Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Stable-dep-of: 8ec454dcd00c ("ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()") Signed-off-by: Sasha Levin commit ef3cd6c0b826e50dc21653b32552e258de6fd51c Author: Julian Anastasov Date: Sat Sep 19 21:07:33 2026 +0300 ipvs: filter some flags received in the backup server [ Upstream commit f96e91748f6304668fe647e686d199d7207d36f1 ] While the IPVS SYNC protocol is not secure by design we can still protect the backup server from messages that can wreak havoc. This commit addresses problems from received connection flags or their combinations. We now drop messages as follows: 1. the NO_CPORT+TEMPLATE combination allows lookups for normal connections to hit template which can break in many ways. While the master does not sync connections with NO_CPORT flag, i.e. before they are established, we still accept NO_CPORT without TEMPLATE. 2. ONE_PACKET: it is not sent by master, so we do not expect it in backup. Before now it was ignored by IP_VS_CONN_F_BACKUP_MASK for protocol v1 while protocol v0 created connections that are not hashed and dropped immediately. Better to apply the IP_VS_CONN_F_BACKUP_MASK also to the flags from v0 messages for consistency with v1. Fixes: 87375ab47cd0 ("[IPVS]: ip_vs_ftp breaks connections using persistence") Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 8d4211f0382773157d0691efbac59f0d9c0f00d8 Author: Julian Anastasov Date: Sat Sep 19 21:07:32 2026 +0300 ipvs: do not create invisible templates [ Upstream commit 616cf5c06934364ab1002b420ebe975850b4b208 ] The IP_VS_CONN_F_ONE_PACKET flag was implemented for normal connections. When conn template inherits this flag from dest->conn_flags it will not be hashed. As result, we will create new template for every new normal connection. Fix it to allow one template to be used by many normal connections. Fixes: 26ec037f9841 ("IPVS: one-packet scheduling") Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260916231652.127456-1-pablo%40netfilter.org Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 395208a9dfdce7f96f4e939e9125479621586dee Author: Julian Anastasov Date: Thu Sep 10 13:08:31 2026 +0300 ipvs: fix missing counter decrement in lblc [ Upstream commit bdac17779f46817f60103baf09f0370546c3f023 ] LBLC may delete cache entries for destinations that are removed or overloaded and replace them with available ones. But ip_vs_lblc_new() forgets to decrement the tbl->entries counter after calling ip_vs_lblc_del(). This can lead to increased shrinking of the cache with every new garbage collection. Fixes: 2f3d771a35fe ("ipvs: do not use dest after ip_vs_dest_put in LBLC") Link: https://sashiko.dev/#/patchset/0bdd5abe9968ded7ca2b9cb6844ba83d94cc8d53.1787318053.git.zhilinz%40nebusec.ai Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 6e4b8510f7232ca16887e5270988a7c6abf31501 Author: Jeff Jo Date: Thu Sep 24 15:44:58 2026 -0700 tcp: refresh TS.Recent for accepted old ACKs [ Upstream commit 1b92780ae4fc3be64f05d97ed8833c445e73b0cf ] A TCP packet can carry new data while acknowledging traffic in the opposite direction. With overlapping traffic in both directions, a delayed packet's acknowledgment can be older than one Linux has already accepted, even when that packet fills a gap in the received data. Linux accepts the data, but tcp_ack() takes the old_ack path and skips updating TS.Recent, the timestamp saved for outgoing acknowledgments. The reply therefore echoes an older timestamp. If the sender uses this echo to measure round-trip time after a long idle period, its estimate includes the idle time and can reduce its sending rate. Update TS.Recent in old_ack using tcp_replace_ts_recent(), before SACK processing can trigger a transmission. This reuses the existing timestamp and sequence checks, including PAWS protection against old duplicate packets. ACK validation already rejects old ACKs in SYN_RECV before this path, so no additional state check is needed. Echoing the timestamp of the packet that fills the receive gap follows RFC 7323 section 4.3. In a socket reproduction with 300 seconds idle, controlled reordering and retransmission to exercise timestamp-based RTT sampling, the sender's smoothed round-trip time was 37.5 seconds without the fix and 15.5 ms with it. Fixes: 12fb3dd9dc3c ("tcp: call tcp_replace_ts_recent() from tcp_ack()") Assisted-by: LLM sparse Signed-off-by: Jeff Jo Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b7ec42c13d7508afe04dd44e01a9380dcdea8bae Author: Jamal Hadi Salim Date: Sat Sep 26 14:03:28 2026 -0400 net/sched: sch_codel: match the no-drop threshold to the packet size [ Upstream commit 54518e0e827f4ca9229ae657022c60bf60f5c1bf ] commit 6439461f1618 ("net/sched: sch_codel: clamp default mtu to avoid disabling CoDel") clamped q->params.mtu to [256, 1 << 20]. The value is the CoDel no-drop threshold (codel_impl.h "*backlog <= params->mtu"), so on a link whose maximum transmitted packet size is below 256 the floor extends CoDel's minimum-backlog exemption beyond one packet and delays drop or mark eligibility by several small packets. Keep the upper bound that guards the original overflow (psched_mtu() wrapping to ~2 GiB on a huge-MTU device) but drop the 256 floor, so the threshold tracks the real device packet size. Conditions to recreate the bug: attach a codel qdisc on a link whose MTU plus hard_header_len is below 256 (e.g. a CAN interface). At that MTU the no-drop threshold must equal the device MTU plus its hard-header length; before this patch it was forced to 256. Requires CAP_NET_ADMIN in a user namespace. Fixes: 6439461f1618 ("net/sched: sch_codel: clamp default mtu to avoid disabling CoDel") Reported-by: Sashiko (nipa) Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260819143136.57350-1-jhs@mojatatu.com Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/QDISC-34MS.v1.20260925165535@mojatatu.com.2 Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 46c576436b38c0558609d6196e8e54e3d3e1e127 Author: Jamal Hadi Salim Date: Sat Sep 26 14:03:27 2026 -0400 net/sched: fq_codel: match the no-drop threshold to the packet size [ Upstream commit d031465acc362866f27e4f8f79cfecf1037fe2e5 ] commit d9ebd8f9aa8b ("net/sched: fq_codel: clamp default quantum and mtu") clamped both q->quantum and q->cparams.mtu to [256, FQ_CODEL_QUANTUM_MAX]. The two fields mean different things: quantum is a DRR credit that wants the 256 floor, but cparams.mtu is the CoDel no-drop threshold (codel_impl.h "*backlog <= params->mtu"). On a link whose maximum transmitted packet size is below 256, the floor extends CoDel's minimum-backlog exemption beyond one packet and delays drop or mark eligibility by several small packets. Split the clamp. quantum keeps [256, FQ_CODEL_QUANTUM_MAX]; cparams.mtu tracks psched_mtu() (the device MTU plus its hard-header length) with only the upper bound that guards the original overflow (psched_mtu() wrapping to ~2 GiB on a huge-MTU device). Conditions to recreate the bug: attach an fq_codel qdisc on a link whose MTU plus hard_header_len is below 256 (e.g. a CAN interface). At that MTU the no-drop threshold must equal the device MTU plus its hard-header length; before this patch it was forced to 256. Basic Testing done: with dev->mtu=100 and hard_header_len=14, a return probe on fq_codel_init() observed cparams.mtu change from 256 to 114 Fixes: d9ebd8f9aa8b ("net/sched: fq_codel: clamp default quantum and mtu") Reported-by: Sashiko (nipa) Link: https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260819143136.57350-1-jhs@mojatatu.com Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/QDISC-34MS.v1.20260925165535@mojatatu.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 04d67f77fe3f9ec9c60db70773fb1696d0d58da8 Author: Jérémy Jean Date: Thu Sep 24 20:21:05 2026 +0000 tipc: prevent GCM nonce reuse on peer key changes [ Upstream commit 512ccd3d0e91e791fb37442aa0a2599aca19783d ] TIPC can encrypt traffic between nodes using a different transmit key for each node. In this mode, the AES-GCM nonce for a packet sent to a known peer consists of a 32-bit prefix (a per-key salt XOR the peer's address) followed by a 64-bit counter. That counter is stored in the peer's RX crypto object. When the peer reports a change in which key it uses to receive packets, TIPC resets this counter. The sender can still be using the same TX key and salt, so subsequent packets reuse earlier nonces. This nonce reuse breaks confidentiality and exposes GCM's authentication key. This makes forgeries trivial: an attacker can exploit CTR malleability to alter captured ciphertexts and use the recovered authentication key to compute a valid tag for the modified ciphertext, under the same key and nonce. Use the TX key's existing aead->seqno counter instead. All encryptions using that key object share the same atomic counter, so concurrent encryptions get distinct nonce counter values. The counter survives key activation and peer reconnection, and peer key-status reports cannot reset it. This prevents those transitions from causing nonce reuse while the same TX key remains installed. The nonce format is unchanged, and receivers do not require consecutive counter values, so sharing the counter across peers remains compatible with existing receivers. A pre-existing check still invokes key revocation in the unlikely event that the counter wraps to zero. Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Signed-off-by: Jérémy Jean Reviewed-by: Tung Nguyen Link: https://patch.msgid.link/20260924202105.3722778-1-Jeremy.Jean@oss.cyber.gouv.fr Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 89d0627145d2f8fb9ed6a3ab9512630b7d2e6781 Author: Florian Fainelli Date: Tue Sep 22 16:24:35 2026 -0700 net: systemport: Fix RUNT MIB counter register offset calculation [ Upstream commit 242935adfeb096f09b29fb2cfcf12f9eb2911fc6 ] In UniMAC hardware, there is a 0xC byte gap between the RX MIB counters and the TX MIB counters, and a second 0xC byte gap between the TX MIB counters and the RX RUNT MIB counters. In bcm_sysport_update_mib_counters(), 'offset' was only set to UMAC_MIB_STAT_OFFSET (0xC) for all non-RX counters, omitting the second 0xC gap for BCM_SYSPORT_STAT_RUNT counters. As a result, all 4 RUNT MIB counters were read from unmapped gap register space. Fix this by setting offset to 2 * UMAC_MIB_STAT_OFFSET (0x18) when reading BCM_SYSPORT_STAT_RUNT counters. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Reviewed-by: Nicolai Buchwitz Signed-off-by: Florian Fainelli Link: https://patch.msgid.link/20260922232440.598918-6-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0dd4e3d569d37001ac8ee9e0872e3585edef02c7 Author: Florian Westphal Date: Fri Sep 4 20:03:07 2026 +0200 netfilter: ipset: do not update comments from kernel-side adds [ Upstream commit a442c8a89fb9c531f9d6ab86120c31decd778d51 ] 'Fixes' commit stopped calling ip_set_init_comment() for hash types from kernel-side-adds (xtables .. -j SET). ip_set_init_comment() says: "The kadt functions don't use the comment extensions in any way." But bitmap set type calls the function from kadt cb too. While this appears to be safe (serialized via the set spinlock), it seems better to not call the init function either, least of all to keep behaviour consistent. ip_set_list calls ip_set_init_comment() only from uadt cb, it can be kept as-is. This was triggered by yet another LLM review, hinting that the existing rcu_dereference_protected() cannot be downgraded to only check if the nfnl mutex is held. Fixes: f30415929be8 ("netfilter: ipset: do not update comments from kernel-side hash adds") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 780665bed305718a9fbb10e4aa4d5570d772c9f6 Author: Sai Teja Aluvala Date: Tue Sep 22 18:33:11 2026 +0530 Bluetooth: btintel: validate DDC record lengths [ Upstream commit c9c15d4d8956df8c564f7c210e4dc5b9b820d97a ] Parse DDC record lengths in unsigned storage so 0xFF does not wrap. Reject records smaller than the mandatory three-byte header, records exceeding U8_MAX, and records exceeding remaining firmware bytes before issuing Intel_Write_DDC. This issue was reported by Claude Mythos. Fixes: 145f2368c5fd ("Bluetooth: btintel: Add Device Configuration support") Signed-off-by: Sai Teja Aluvala Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 925135789c6561d436feb49e2ddc939ab184f67d Author: Sang-Hoon Choi Date: Tue Sep 22 03:49:28 2026 +0900 Bluetooth: hci_core: free the HCI ID if naming fails [ Upstream commit d1ac915fb4184faad1b62148be50f317de7c24b5 ] hci_register_dev() allocates an ID before calling dev_set_name(). If naming fails, it returns without releasing that ID. The device has not been registered and hdev->id has not been assigned, so the normal unregister path cannot release it. Free the allocated ID before returning the naming error. Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings") Reported-by: Changyul Lee Assisted-by: LLM Signed-off-by: Sang-Hoon Choi Reported-by: Changyul Lee Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit b902a1adbfbf998eebf22dad75cfb631e2c99003 Author: Cezary Rojewski Date: Fri Sep 18 13:17:45 2026 +0200 ASoC: codecs: rt274: Fix format setting for 44100 rate [ Upstream commit 6eda8938a790f65bd24fcfaae7b40ad4613fb7a2 ] As per specification, Sample Base Rate (bit 14) shall be set to 1 for 44.1 kHz. Fixes: c7e79b2b2d2d ("ASoC: rt274: add rt274 codec driver") Signed-off-by: Amadeusz Sławiński Signed-off-by: Cezary Rojewski Link: https://patch.msgid.link/20260918111745.3589393-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 00f83d39675adc12d56957a1f5e316812157e4d3 Author: Zhao Li Date: Mon Sep 14 23:28:25 2026 +0800 wifi: cfg80211: preserve hidden-group beacon IE ownership [ Upstream commit cc45f313d85533d647ce619326302aad6f797c14 ] A hidden-group probe-response entry borrows its beacon IEs from the group's beacon entry. cfg80211_update_assoc_bss_entry() can pass such an entry to cfg80211_update_known_bss() when merging scan entries after a channel switch. Copying the borrowed beacon_ies into the associated entry gives the same allocation two owners. Releasing the group's beacon entry can then leave the associated entry pointing to freed IEs, which are freed again when that entry is released. Skip beacon IE replacement when the source entry belongs to a hidden group. Preserve probe-response processing, the subsequent metadata updates, and the existing rejection path for conflicting hidden beacon updates. Fixes: 0afd425b1b64 ("cfg80211: fix duplicated scan entries after channel switch") Reported-by: Yilin Zhang Closes: https://lore.kernel.org/linux-wireless/20260901080427.1983015-1-yilinzhang@moonshot.ai/ Assisted-by: Codex:gpt-6-astra Signed-off-by: Zhao Li Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 302b622d5f3c9ef5efa36e41e69d278599265cfc Author: Nicolas Escande Date: Wed Aug 12 16:58:05 2026 +0200 wifi: ath11k: reset ar->num_stations on hardware start [ Upstream commit 7e0ad05ebc72fffba2bdf2400400902d94ed7272 ] When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Nicolas Escande Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260812-num-station-v3-1-871d20e043f6@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin commit b0b67e3efa42dc0ad728a1f2c5b0bb15c433a9ea Author: HyeongJun An Date: Sun Sep 20 22:53:27 2026 +0900 ASoC: wm8903: Move the DRC QR threshold to the register that holds it [ Upstream commit e31ae4aeb049983fe3be0cf1e12c8074811a7685 ] The DRC_THRESH_QR field is bits 7 and 6 of DRC_1, but the control sits on DRC_0. Its shift and max are right for the field, only the register is wrong. Those bits of DRC_0 belong to DRC_STARTUP_GAIN, which "DRC Startup Volume" claims as bits 10 to 6. So the two controls share bits 7 and 6. Writing either one moves the other, and the quick release threshold is never reached at all. The six fields of DRC_1 tile it exactly, so there is nowhere else the threshold could live. Point the control at DRC_1. Found by a sweep for two controls claiming the same bits of one register. No board with this codec was to hand, the register map is the driver's own wm8903.h. Fixes: f1c0a02f32f8 ("ALSA: ASoC: Add WM8903 CODEC driver") Signed-off-by: HyeongJun An Assisted-by: Claude:claude-opus-5 Reviewed-by: Charles Keepax Link: https://patch.msgid.link/20260920135327.3628704-1-sammiee5311@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 0a918dd43ed9fe68b25dd6a3bc6015c16e75c71b Author: Abdurrahman Hussain Date: Mon Aug 31 18:29:25 2026 -0700 of/overlay: don't create "//" paths for fragments targeting the root [ Upstream commit 21c89ff1fc86ffa517f3a9ca1ba5c48e9e37c1ba ] dup_and_fixup_symbol_prop() rewrites a symbol value by replacing its "/fragment/__overlay__" prefix with the fragment's target path. When the fragment targets the root node the target path is "/" and the result starts with "//", which __of_find_node_by_full_path() cannot resolve: symbols pointing into such fragments silently stop resolving. Drop the target path when it is the root and the tail is non-empty. A value naming the fragment root itself (empty tail) keeps the "/". Fixes: d1651b03c2df ("of: overlay: add overlay symbols to live device tree") Assisted-by: Claude:claude-fable-5 [Claude Code] Signed-off-by: Abdurrahman Hussain Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-7-02754604805a@nexthop.ai Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin commit c654f283d7db20648a5bbf979209f78d4fa9be3f Author: Abdurrahman Hussain Date: Mon Aug 31 18:29:24 2026 -0700 of/overlay: don't leak fragment references when changeset init fails [ Upstream commit 1d62f0f2bc7edb12ed09f71203df0e47fa4efca4 ] init_overlay_changeset() stores the number of initialized fragments in ovcs->count only on full success. When find_target() or the __symbols__ lookup fails partway through, the target and overlay references taken for the fragments initialized so far are never dropped: free_overlay_changeset() bounds its cleanup loop by ovcs->count, which is still 0. Store the running count on the error path so free_overlay_changeset() puts whatever was set up. The store is guarded by ovcs->fragments because on the allocation-failure path cnt still holds the counting pass total while there is no fragments array; everywhere else cnt only counts fully-initialized fragments. Reported-by: Sashiko AI Closes: https://lore.kernel.org/20260805204009.CF3891F000E9@smtp.kernel.org Fixes: 61b4de4e0b38 ("of: overlay: minor restructuring") Assisted-by: Claude:claude-opus-4-8 [Claude Code] Signed-off-by: Abdurrahman Hussain Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-6-02754604805a@nexthop.ai Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin commit c709a3cfa59a5beb6a4766438dd06aea90f3ed9b Author: Julian Sun Date: Tue Sep 8 11:35:18 2026 +0800 nvmet: preserve device path on allocation failure [ Upstream commit 2f271b812170d4cad578bae1f91db72f3c2e36e7 ] nvmet_ns_device_path_store() frees the old path before allocating its replacement, losing the existing configuration if allocation fails. Allocate the new path before freeing the old one. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Signed-off-by: Julian Sun Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit 006b659eb86f941f23f279d958b085075a0fd1f0 Author: Nilesh Javali Date: Thu Jul 30 21:28:29 2026 +0530 scsi: qla2xxx: Fix NVMe abort reference leak on repeated abort [ Upstream commit 06b5b2a5d499323f1c3256ead35798e8e3d15e60 ] qla_nvme_ls_abort() and qla_nvme_fcp_abort() take a command reference with kref_get_unless_zero() and then call schedule_work() on priv->abort_work, ignoring its return value. qla_nvme_abort_work() runs once and drops exactly one reference via kref_put(&sp->cmd_kref, sp->put_fn). Since the per-abort INIT_WORK() was moved to submission time, schedule_work() now returns false when the work is already pending, for example on a concurrent transport teardown and timeout-driven abort of the same command. In that case the reference taken for the second abort is never released because the work still executes only once, leaking a reference. The command is then never returned to the NVMe-FC transport, which can hang the port. Drop the reference when schedule_work() returns false, so each kref_get_unless_zero() is balanced regardless of whether the work was newly queued. The held reference keeps priv->sp valid for the put. Fixes: 7e85f6dbc856 ("scsi: qla2xxx: Initialize NVMe abort_work once at submission") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-25-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit 6ee4e3774349fa04bba13e668f3322db47d89b08 Author: Nilesh Javali Date: Thu Jul 23 10:34:08 2026 +0530 scsi: qla2xxx: Initialize NVMe abort_work once at submission [ Upstream commit 7e85f6dbc85616de2172bce8eaf84b387a723cd1 ] qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. Fixes: e473b3074104 ("scsi: qla2xxx: Add FC-NVMe abort processing") Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260723050413.3897522-52-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit ff88df6d6a72458e1c4ca0e0342327cafd8317f4 Author: Kuniyuki Iwashima Date: Sat May 30 06:42:58 2026 +0000 hsr: Remove WARN_ONCE() in hsr_addr_is_self(). [ Upstream commit afd0f17ca46258cec3a5cc48b8df9327fe772490 ] syzbot reported the warning [0] in hsr_addr_is_self(), whose assumption is simply wrong. hsr->self_node is cleared in hsr_del_self_node(), which is called from hsr_dellink(). Since dev->rtnl_link_ops->dellink() is called before unregister_netdevice_many(), there is a window when user can find the device but without hsr->self_node. Let's remove WARN_ONCE() in hsr_addr_is_self(). [0]: HSR: No self node WARNING: net/hsr/hsr_framereg.c:39 at hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39, CPU#0: syz.4.16848/17220 Modules linked in: CPU: 0 UID: 0 PID: 17220 Comm: syz.4.16848 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 RIP: 0010:hsr_addr_is_self+0x211/0x3f0 net/hsr/hsr_framereg.c:39 Code: 33 2f 41 0f b7 dd 89 ee 09 de 31 ff e8 c8 b4 c6 f6 09 dd 74 54 e8 0f b0 c6 f6 31 ed eb 53 e8 06 b0 c6 f6 48 8d 3d 2f 50 9c 04 <67> 48 0f b9 3a 31 ed eb 42 e8 c1 13 1f 00 89 c5 31 ff 89 c6 e8 96 RSP: 0018:ffffc900041c70e0 EFLAGS: 00010283 RAX: ffffffff8afdc6ca RBX: ffffffff8afdc4e6 RCX: 0000000000080000 RDX: ffffc90010493000 RSI: 0000000000000948 RDI: ffffffff8f9a1700 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc900041c71e8 R11: fffff52000838e3f R12: dffffc0000000000 R13: ffff888041f9e3c0 R14: ffff888086ee3802 R15: 0000000000000000 FS: 00007f6fe985d6c0(0000) GS:ffff888126176000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f80bd437dac CR3: 0000000025096000 CR4: 00000000003526f0 DR0: ffffffffffffffff DR1: 00000000000001f8 DR2: 0000000000000002 DR3: ffffffffefffff15 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: check_local_dest net/hsr/hsr_forward.c:592 [inline] fill_frame_info net/hsr/hsr_forward.c:728 [inline] hsr_forward_skb+0xa11/0x2a80 net/hsr/hsr_forward.c:739 hsr_dev_xmit+0x253/0x370 net/hsr/hsr_device.c:236 __netdev_start_xmit include/linux/netdevice.h:5368 [inline] netdev_start_xmit include/linux/netdevice.h:5377 [inline] xmit_one net/core/dev.c:3888 [inline] dev_hard_start_xmit+0x2df/0x860 net/core/dev.c:3904 __dev_queue_xmit+0x1428/0x3900 net/core/dev.c:4870 neigh_output include/net/neighbour.h:556 [inline] ip_finish_output2+0xcec/0x10b0 net/ipv4/ip_output.c:237 ip_send_skb net/ipv4/ip_output.c:1510 [inline] ip_push_pending_frames+0x8b/0x110 net/ipv4/ip_output.c:1530 raw_sendmsg+0x1547/0x1a50 net/ipv4/raw.c:659 sock_sendmsg_nosec net/socket.c:787 [inline] __sock_sendmsg net/socket.c:802 [inline] ____sys_sendmsg+0x7da/0x9c0 net/socket.c:2698 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2752 __sys_sendmsg net/socket.c:2784 [inline] __do_sys_sendmsg net/socket.c:2789 [inline] __se_sys_sendmsg net/socket.c:2787 [inline] __x64_sys_sendmsg+0x1c3/0x2a0 net/socket.c:2787 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6feb62ce59 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6fe985d028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6feb8a6090 RCX: 00007f6feb62ce59 RDX: 0000000000000000 RSI: 0000200000000000 RDI: 0000000000000004 RBP: 00007f6feb6c2d6f R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6feb8a6128 R14: 00007f6feb8a6090 R15: 00007ffcf01cc488 Fixes: f266a683a480 ("net/hsr: Better frame dispatch") Reported-by: syzbot+652670cf249077eb498b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a1a861e.b111c304.35cd64.0016.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima Reviewed-by: Fernando Fernandez Mancera Link: https://patch.msgid.link/20260530064300.340793-1-kuniyu@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 48c76820dd8858ce60a6e42519141ebcf3dfeebf Author: Xiang Mei Date: Fri Sep 18 16:40:14 2026 -0700 ALSA: line6: reject oversized playback packets commit 61b0a5a114fa4552892da5c0ff2f42e63bf08c6b upstream. Each playback URB is handed a slice of out.buffer that is exactly LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT endpoint, but the number of bytes written into that slice is never compared against it. submit_audio_out_urb() takes the frame count from prev_fsize, which audio_in_callback() derived from the *IN* endpoint's received packet length, and rescales it with the playback frame size; when prev_fsize is still zero it synthesizes a length from the sample rate instead. On a device declaring a large IN wMaxPacketSize and a small OUT wMaxPacketSize, the resulting memcpy(), or the memset() when the playback stream is idle, runs past its slice and, as the reproducer below shows, beyond the allocation. usb_submit_urb() is not a backstop. max_packet_size_out comes from usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize, while USB core validates a high-speed isochronous length against that base scaled by usb_endpoint_maxp_mult(). A length of up to three times the allocated slice is therefore accepted, and even a rejected URB is only rejected after the write. Reject a packet that does not fit the slice the driver allocated for it. Clamping it instead would silently shorten the capture-derived rate feedback and desynchronize the two streams. BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229) Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002 Workqueue: events line6_startup_work Call Trace: __asan_memcpy (mm/kasan/shadow.c:106) submit_audio_out_urb (sound/usb/line6/playback.c:229) line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291) line6_stream_start (sound/usb/line6/pcm.c:194) line6_pcm_acquire (sound/usb/line6/pcm.c:337) line6_startup_work (sound/usb/line6/driver.c:728) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address belongs to the object at ffff888100bbd400 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes inside of allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) Cc: stable@vger.kernel.org Fixes: 7a0f55aeeb8f ("ALSA: line6: Support assymetrical in/out configurations") Reported-by: Assisted-by: LLM Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260918234014.1318325-1-xmei5@asu.edu Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 7017c9dda1ebbab428a6fd29c841596b5c9c84d1 Author: Nguyen Ngoc Thang Date: Sat Sep 26 00:07:17 2026 +0700 ALSA: caiaq: unregister the input device when probe fails commit 0b7bd20f6379bc5e431fd74d866390f5b5b63f3c upstream. setup_card() registers the input device, whose name and phys point into struct snd_usb_caiaqdev, and then goes on to snd_card_register() and snd_usb_caiaq_control_init(). If either fails, snd_probe() calls snd_card_free(), which frees the device state but leaves the input device registered: card_free() only clears the pointer, and the input device is unregistered from snd_disconnect() alone. Reading its "uevent" attribute afterwards dereferences freed memory: BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0 Read of size 1 at addr ffff8880208f5043 by task caiaq/4967 add_uevent_var+0x183/0x3a0 input_dev_uevent+0x162/0x900 dev_uevent+0x2f1/0x870 uevent_show+0x1ca/0x3a0 ... Unregister the input device on the probe error path, as snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when no input device was registered. Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that makes snd_usb_caiaq_control_init() fail. Fixes: 28abd224db4a ("ALSA: caiaq: Handle probe errors properly") Cc: stable@vger.kernel.org Reported-by: syzbot+2a123f6269da57ffefaa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2a123f6269da57ffefaa Signed-off-by: Nguyen Ngoc Thang Link: https://patch.msgid.link/20260925170717.22462-1-ngocthang2710.1999@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d388658505bf707ff0cd7142c37c868febf8c2a5 Author: Zizhi Wo Date: Sat Sep 5 14:43:37 2026 +0800 vt: skip screen update for DEC alignment test on backgroup consoles commit 0928ed9bd7946baee911efa401088697836e3b1e upstream. [BUG] Recently, we encountered a KASAN warning as follows: BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140 Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239 CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 Call Trace: ... kasan_report+0xf0/0x120 fb_pad_aligned_buffer+0x11f/0x140 ccw_putcs+0x86c/0xa80 fbcon_putcs+0x338/0x410 do_update_region+0x21d/0x450 do_con_write+0x1e0e/0x4880 con_write+0x13/0x80 n_tty_write+0x374/0x1010 file_tty_write.isra.0+0x404/0x7a0 ... reproduce: 1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 8 and op.height = 16 (visible VC1) 2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET, op.width = 28 and op.height = 24 (invisible VC2) 3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all 4) write EShash8(esc hash8) to tty1 [CAUSE] All VCs render to the framebuffer. setfont only modifies the target VC's font without resizing the framebuffer backing buffer (par->rotated.buf); the buffer is only resized for the visible VC (fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on the con_should_update() check performed before every update_region(). However, the ESC # 8 path (do_con_trol -> do_update_region) omits the con_should_update() check. After changing the font size of an invisible VC, do_update_region() fills using the new font size against a buffer that was never resized, causing an out-of-bounds access. [FIX] Only push the update when the console is visible and not blanked, add the con_should_update() check in the do_con_trol() like every other call site of do_update_region() (update_region(), invert_screen(), ...). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Zizhi Wo Link: https://patch.msgid.link/20260905064337.3083103-1-wozizhi@huaweicloud.com Signed-off-by: Greg Kroah-Hartman commit 28e322161e5d90b7c39e99f49fe081a58ff615ec Author: Clément Léger Date: Tue Jan 17 15:49:29 2023 +0100 of/irq: add missing of_node_put() for interrupt parent node [ Upstream commit eb2b4ecf7299ee39ee9cecc4d3f2633aeb10cefb ] After calling of_irq_parse_one(), the node provided in the of_phandle_args has a refcount increment by one. Add missing of_node_put in of_irq_get() to decrement the refcount once used. Signed-off-by: Clément Léger Link: https://lore.kernel.org/r/20230117144929.423089-1-clement.leger@bootlin.com Signed-off-by: Rob Herring Signed-off-by: Sasha Levin commit e3e24f4c434c56952412f875b834aa9daaa4fb15 Author: Sanghyun Park Date: Fri Sep 18 12:26:58 2026 +0900 vxlan: use one headroom snapshot for neighbour replies [ Upstream commit 481506a756dcd828ef42391cb08f38d8d96d38fc ] vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then samples it again to reserve headroom. A concurrent vxlan_changelink() can update needed_headroom between the two reads, creating a TOCTOU race. The second value can exceed the allocation and make the Ethernet header write out of bounds. The race is reproducible on the unpatched kernel. It occurred when vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte skbuff_small_head allocation. Snapshot the headroom once and use that value for both allocation and reservation. Fixes: 4b29dba9c085 ("vxlan: fix nonfunctional neigh_reduce()") Signed-off-by: Sanghyun Park Link: https://patch.msgid.link/20260918032842.502409-2-sanghyun.park.cnu@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 8ee0d1e966c78d1d5b29b8e49d3e8feffbf28646 Author: Maoyi Xie Date: Fri Oct 2 18:50:55 2026 -0700 rds_tcp: close NULL deref window in rds_tcp_set_callbacks commit d2bfdbb69cf87676981b1043010b6224d84c6d3a upstream. rds_tcp_set_callbacks() links a new rds_tcp_connection onto rds_tcp_tc_list under rds_tcp_tc_list_lock. It releases the lock, then assigns tc->t_sock = sock outside the lock. rds_tcp_tc_info() and rds6_tcp_tc_info() walk rds_tcp_tc_list under the same lock. Both dereference tc->t_sock->sk without a NULL check. A reader can acquire rds_tcp_tc_list_lock between the writer's spin_unlock and the t_sock store. It then sees a list entry whose t_sock is NULL. The dereference of tc->t_sock->sk is a NULL access. Move tc->t_sock = sock inside rds_tcp_tc_list_lock, before list_add_tail. A reader holding the lock then observes the linkage and the t_sock store together. The restore path is safe. rds_tcp_restore_callbacks() does list_del_init inside the lock. The matching tc->t_sock = NULL after unlink is harmless to readers holding the lock. Fixes: 70041088e3b9 ("RDS: Add TCP transport to RDS") Suggested-by: Simon Horman Signed-off-by: Maoyi Xie Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260512142807.1855619-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski [ achender: resolved context conflict; tc->t_rtn initialization is not present in this tree ] Signed-off-by: Allison Henderson Signed-off-by: Sasha Levin commit 1dd3ef3dda76513c74cf6f80af7dab7798e7fa6c Author: Xin Long Date: Thu Oct 6 15:45:02 2022 -0400 openvswitch: add nf_ct_is_confirmed check before assigning the helper [ Upstream commit 3c1860543fccc1d0cfe3fd6b190e414a418fe60e ] A WARN_ON call trace would be triggered when 'ct(commit, alg=helper)' applies on a confirmed connection: WARNING: CPU: 0 PID: 1251 at net/netfilter/nf_conntrack_extend.c:98 RIP: 0010:nf_ct_ext_add+0x12d/0x150 [nf_conntrack] Call Trace: nf_ct_helper_ext_add+0x12/0x60 [nf_conntrack] __nf_ct_try_assign_helper+0xc4/0x160 [nf_conntrack] __ovs_ct_lookup+0x72e/0x780 [openvswitch] ovs_ct_execute+0x1d8/0x920 [openvswitch] do_execute_actions+0x4e6/0xb60 [openvswitch] ovs_execute_actions+0x60/0x140 [openvswitch] ovs_packet_cmd_execute+0x2ad/0x310 [openvswitch] genl_family_rcv_msg_doit.isra.15+0x113/0x150 genl_rcv_msg+0xef/0x1f0 which can be reproduced with these OVS flows: table=0, in_port=veth1,tcp,tcp_dst=2121,ct_state=-trk actions=ct(commit, table=1) table=1, in_port=veth1,tcp,tcp_dst=2121,ct_state=+trk+new actions=ct(commit, alg=ftp),normal The issue was introduced by commit 248d45f1e193 ("openvswitch: Allow attaching helper in later commit") where it somehow removed the check of nf_ct_is_confirmed before asigning the helper. This patch is to fix it by bringing it back. Fixes: 248d45f1e193 ("openvswitch: Allow attaching helper in later commit") Reported-by: Pablo Neira Ayuso Signed-off-by: Xin Long Acked-by: Aaron Conole Tested-by: Aaron Conole Link: https://lore.kernel.org/r/c5c9092a22a2194650222bffaf786902613deb16.1665085502.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4a48e2e501267c8d0a9a10ada41d960ddb2dae22 Author: Konrad Dybcio Date: Tue Jul 9 13:15:40 2024 +0200 drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs [ Upstream commit 16007768551d5bfe53426645401435ca8d2ef54f ] There are some cases, such as the one uncovered by Commit 46d4efcccc68 ("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails") where msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL); is called on gpu->pdev == NULL, as the GPU device has not been fully initialized yet. Turns out that there's more than just the aforementioned path that causes this to happen (e.g. the case when there's speedbin data in the catalog, but opp-supported-hw is missing in DT). Assigning msm_gpu->pdev earlier seems like the least painful solution to this, therefore do so. Signed-off-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/602742/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 75ea82fd89b251fa23ab32f661a905e29e25f3fe Author: Benjamin Berg Date: Wed Dec 20 13:41:43 2023 +0200 wifi: cfg80211: avoid double free if updating BSS fails [ Upstream commit acc44cbd7727115f9381c35c2898b1b5af665ec8 ] cfg80211_update_known_bss will always consume the passed IEs. As such, cfg80211_update_assoc_bss_entry also needs to always set the pointers to NULL so that no double free can occur. Note that hitting this would probably require being connected to a hidden BSS which is then doing a channel switch while also switching to be not hidden anymore at the same time. Signed-off-by: Benjamin Berg Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20231220133549.8891edb28d51.Id09c5145363e990ff5237decd58296302e2d53c8@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 7f798168c54455559da0f7a377a23ab7019fec35 Author: Jun Yang Date: Sat Sep 26 17:55:15 2026 +0800 sctp: check RCV_SHUTDOWN after the sendmsg connect wait commit 4f1da630d13de0370e2f6361f961f1c8b384af1c upstream. sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave") Cc: stable@vger.kernel.org Reported-by: TencentOS Corvus AI Signed-off-by: Jun Yang Acked-by: Xin Long Link: https://patch.msgid.link/20260926095606.68601-1-juny24602@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 709edb317ec4a1429dfa1bf41577aa03d7b147c1 Author: Runyu Xiao Date: Wed Sep 2 16:03:18 2026 +0800 rtc: spear: initialize IRQ state before requesting alarm IRQ commit 055ef5ce9f67a6a3a1363fa663007f8196cc0fb8 upstream. devm_request_irq() enables the interrupt before it returns, so the handler may run while probe is still initializing the device. Initialize the MMIO address and spinlock before requesting the alarm IRQ. Fixes: 0942a71e435f ("rtc: add support for spear rtc") Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5 Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260902080318.3498434-1-runyu.xiao@seu.edu.cn Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman commit 1e6ee93cea4b77253b1b81eb5759899f959ebee3 Author: Ilkka Lappeteläinen Date: Fri Sep 25 15:48:29 2026 +0300 net/packet: prevent TX_RING byte count overflow commit 2cf81fc9505b148b1b70068303ea6ea4b1212403 upstream. tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds each valid packet length to the signed int len_sum. Userspace can recycle completed frames concurrently, so a single blocking send call is not bounded by the ring size. After enough successful transmissions len_sum wraps into the negative range. In particular, 65536 65535-byte frames followed by a 65007-byte frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats that as an impossible return and triggers a BUG. On systems configured to panic on oops, a CAP_NET_RAW holder can panic the host kernel. Stop before the next frame would make the byte count exceed INT_MAX. The positive short count leaves that frame pending for a later send call. A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build of Linux 7.3-rc4. With this change, the same reproducer returned the expected positive short count without an oops. Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Cc: stable@vger.kernel.org Signed-off-by: Ilkka Lappeteläinen Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260925124829.6595-1-ilkka.lappetelainen@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 4e5a6d89083af6f23f0ac2cb611ef267590a3ece Author: Aohan Mei Date: Thu Sep 10 16:33:26 2026 +0800 netfilter: nft_flow_offload: drop flowtable reference on init error path commit 747928b5d4ff8c8de55138a54c13980e4bb88578 upstream. nft_flow_offload_init() bumps the flowtable use count with nft_use_inc() before calling nf_ct_netns_get(). When the latter fails, the error is returned as-is and the reference is leaked. The upper layers do not balance it either: nf_tables_newexpr() clears expr->ops when the expression init callback fails, so the nft_expr_more() iteration in nft_rule_expr_deactivate() and nf_tables_rule_destroy() stops right before the failed expression and its ->destroy callback, which would drop the reference, never runs. Each failed rule addition therefore leaks one flowtable reference and the flowtable can no longer be removed: NFT_MSG_DELFLOWTABLE keeps reporting -EBUSY even though no rule references it. Save the nf_ct_netns_get() return value and undo the nft_use_inc() when it fails, restoring the inc/dec pairing within nft_flow_offload_init() itself. Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression") Reported-by: TencentOS Corvus AI Cc: stable@vger.kernel.org Assisted-by: CodeBuddy:Kimi-K3 Signed-off-by: Aohan Mei Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 004a0ee2e5315f1245775b369fcb940e8cda3807 Author: Abdurrahman Hussain Date: Mon Aug 31 18:29:22 2026 -0700 of/overlay: put property on deadprops only after changeset add succeeds commit 814f2da6995772c07a7c9c2cc6028b6e3f3ecc9c upstream. add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. Fixes: f96278810150 ("of: overlay: set node fields from properties when add new overlay node") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-fable-5 [Claude Code] Signed-off-by: Abdurrahman Hussain Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-4-02754604805a@nexthop.ai Signed-off-by: Rob Herring (Arm) Signed-off-by: Greg Kroah-Hartman commit c0f7fcf6f8da0de114534825e70e9690ff72b454 Author: Wentao Liang Date: Thu Sep 17 12:42:47 2026 +0000 of/irq: Fix remaining refcount leaks in of_irq_init() commit 30724547b221e0e670ddfef140fc7d816b2aaec6 upstream. Successfully initialized controllers are moved to intc_parent_list, but the final cleanup only frees the descriptors. The device node references taken with of_node_get() and the interrupt parent references are therefore leaked on the normal return path. Drop both before kfree(), as the intc_desc_list cleanup already does. Fixes: 8363ccb917c6 ("of/irq: add missing of_node_put") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20260917124247.2151674-1-vulab@iscas.ac.cn Signed-off-by: Rob Herring (Arm) Signed-off-by: Greg Kroah-Hartman commit 8d9c97fb262067933ff4452db19e692d26622352 Author: Jérémy Jean Date: Tue Sep 22 20:27:35 2026 +0000 audit: fix exe mark UAF in kill_rules() commit aa650d87a498844060eecb1d336f4d46f4d1b0b3 upstream. kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait. Cc: stable@vger.kernel.org Fixes: 34d99af52ad4 ("audit: implement audit by executable") Assisted-by: Codex:gpt-5 Signed-off-by: Jérémy Jean Reviewed-by: Ricardo Robaina Tested-by: Ricardo Robaina Reviewed-by: Bradley Morgan Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit da83fed81241b03fd0e7ccf0091b051cf420d8d2 Author: Zihan Xi Date: Wed Sep 30 20:59:10 2026 -0400 smb: client: close completed creates on compound wait errors [ Upstream commit 6c5c547f037bc18f0b8d0b5db5a648f8f630ce85 ] compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior. Fixes: e0bba0b85481 ("cifs: add compound_send_recv()") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zihan Xi Tested-by: Frank Sorenson Signed-off-by: Paulo Alcantara [ adapted MID cancellation to use 5.10’s GlobalMid_Lock and MID_WAIT_CANCELLED flag. ] Signed-off-by: Sasha Levin commit d4c05b5cb0a3132453e36a300d45de44bf6783c4 Author: Zihan Xi Date: Thu Oct 1 07:01:02 2026 -0400 smb: client: close handle after create-context parsing failure [ Upstream commit 566820af017e81497fb5e9d3ad6e7ffe2828bc8b ] SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count. Fixes: af1689a9b770 ("smb: client: fix potential OOBs in smb2_parse_contexts()") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zihan Xi Tested-by: Frank Sorenson Signed-off-by: Paulo Alcantara Signed-off-by: Sasha Levin commit 774f4d093da31e89a5ca6657742b01cea1ca1fc6 Author: ChenXiaoSong Date: Thu Oct 1 07:01:01 2026 -0400 smb/client: pass cifs_open_info_data to SMB2_open() [ Upstream commit 1f551e407bb49dce0bbd34ed6a499dad69e18020 ] Let SMB2_open() fill the smb2_file_all_info embedded in cifs_open_info_data directly. This removes the temporary smb2_file_all_info copy in smb2_open_file(). Signed-off-by: ChenXiaoSong Signed-off-by: Steve French [5.10 dependency adaptation] This tree still uses fs/cifs and does not define cifs_open_info_data. Keep the existing SMB2_open() argument type and the FILE_ALL_INFO conversion in smb2_open_file(); drop the wrapper-type and caller changes. Use the dependency's file_info pointer directly on the existing buffer inside SMB2_open(), preserving the stable metadata-copy behavior. Move the existing open_done trace after smb2_parse_contexts(), retaining its six-argument stable signature. Together with the file_info argument, this allows 566820af017e ("smb: client: close handle after create-context parsing failure") to cherry-pick cleanly across the directory rename. No functions are added, and the target's close-on-error fix remains for the target commit. [ sashal: Reduced backport -- upstream 1f551e407bb49 touches 4 file(s), this backport carries 1. Not backported here: fs/smb/client/link.c fs/smb/client/smb2file.c fs/smb/client/smb2pdu.c fs/smb/client/smb2proto.h This note is generated from the file lists only; see the resolution record for the reasoning. ] Stable-dep-of: 566820af017e ("smb: client: close handle after create-context parsing failure") Signed-off-by: Sasha Levin commit f88a9b934ce351cc394e9e44a8fc04e9f0fc41dd Author: ChenXiaoSong Date: Thu Oct 1 07:01:00 2026 -0400 smb/client: use stack-allocated smb2_file_all_info in smb3_query_mf_symlink() [ Upstream commit fc8789bb57e625e5f32ac57ca2e7d3e7b7fda225 ] SMB2_open() only fills the fixed fields, so a stack-allocated smb2_file_all_info is sufficient here. Signed-off-by: ChenXiaoSong Signed-off-by: Steve French Stable-dep-of: 566820af017e ("smb: client: close handle after create-context parsing failure") Signed-off-by: Sasha Levin commit 10c14ba9a2f75be78bde46fb7f5432bf02b39676 Author: Chen Changcheng Date: Tue Sep 29 22:38:41 2026 -0400 HID: alps: unregister DualPoint Stick input device on remove [ Upstream commit aa9dde93e05a837645fdfd577eea71f0733f0694 ] alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2. Fixes: 2562756dde55 ("HID: add Alps I2C HID Touchpad-Stick support") Cc: stable@vger.kernel.org Signed-off-by: Chen Changcheng Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 85831ccca7c8f432d29d144c06d30fd5c6c1c657 Author: Bastien Nocera Date: Tue Sep 29 22:38:40 2026 -0400 HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM [ Upstream commit 5e130f58629a2819c9d053507ad368160d25eb65 ] This increases build coverage and allows to drop an #ifdef. Signed-off-by: Bastien Nocera Signed-off-by: Jiri Kosina Stable-dep-of: aa9dde93e05a ("HID: alps: unregister DualPoint Stick input device on remove") Signed-off-by: Sasha Levin commit 436fa1637c2b2db3230f894700434eaabc795241 Author: Marcus Folkesson Date: Tue Sep 29 22:38:39 2026 -0400 HID: hid-alps: use default remove for hid device [ Upstream commit 989f7cc94f1174269282a4a46bb735c7f11527de ] hid_device_remove() will call hid_hw_stop() as default .remove function if no function is specified. Signed-off-by: Marcus Folkesson Signed-off-by: Jiri Kosina Stable-dep-of: aa9dde93e05a ("HID: alps: unregister DualPoint Stick input device on remove") Signed-off-by: Sasha Levin commit 5fe54684db25b0bf73cb34fe7df780d34a513718 Author: Thomas Weißschuh Date: Thu Oct 12 12:23:38 2023 +0200 HID: core: remove #ifdef CONFIG_PM from hid_driver [ Upstream commit df8b030d82dd1224881acb4e778fa06c4824f72b ] Allow HID drivers to pass ->suspend, ->resume and ->reset_resume via pm_ptr(). Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be compiled, protecting against bitrot. The linker will then garbage-collect the unused function avoiding any overhead. The only overhead in the final kernel image and at runtime are a few extra bytes in 'struct hid_driver'. The same approach is chosen by 'struct usb_driver' and other subsystems. Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-1-0a71531ca93b@weissschuh.net Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin commit a0c11c05f30c3b6b9fad264a74dbf8b85236e7bc Author: Tibor Harcsa Date: Mon Jun 29 22:34:20 2026 +0200 Bluetooth: btusb: Add IMC Networks QCA9377 to quirks table [ Upstream commit dc16388d45ecbd3be0d8c9424dbbaa2c81806578 ] Add the USB ID (13d3:3503) for the IMC Networks Qualcomm Atheros QCA9377 Bluetooth controller to the btusb quirks table. This device requires Qualcomm Rome firmware and wideband speech support to function properly; otherwise, BLE scanning fails with HCI unexpected event opcode 0x2005 errors. The device reports the following in /sys/kernel/debug/usb/devices: P: Vendor=13d3 ProdID=3503 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tibor Harcsa Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit fa6f79bb0009406bb11e6912b53ab7c564d6f06b Author: Aldo Ariel Panzardo Date: Wed Sep 30 19:14:03 2026 -0400 Bluetooth: mgmt: fix race in read_unconf_index_list() [ Upstream commit b5dbb41b212c50c095a4dbee3017a84fe94f033b ] read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers. Fixes: 73d1df2a7a10 ("Bluetooth: Add support for Read Unconfigured Index List command") Cc: stable@vger.kernel.org Signed-off-by: Aldo Ariel Panzardo Signed-off-by: Luiz Augusto von Dentz [ replaced unavailable list_count_nodes() with an unconditional device-counting loop. ] Signed-off-by: Sasha Levin commit 7e161c8b3c249f6a89c5ffbbece8f4883c5a9ce1 Author: Zihan Xi Date: Wed Sep 30 12:11:57 2026 -0400 smb: client: validate POSIX create context length [ Upstream commit fa2e9900dd2a3f5a1e7ef5a8c5e8d435feedbfcc ] parse_posix_ctxt() reads the fixed nlink, reparse_tag, and mode fields before checking that the POSIX create context contains them. A short context can pass the generic checks and still make these fixed-width reads run past its declared data. The current in-tree smb2_open_file() path passes a NULL posix pointer, so this handler is not reached on the ordinary open path. Still require the POSIX data to cover all three fields before reading them because the helper performs those unguarded reads. Keep the existing soft-failure behavior so malformed optional metadata does not fail the open. Fixes: 69dda3059e7a ("cifs: add SMB2_open() arg to return POSIX data") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zihan Xi Tested-by: Frank Sorenson Signed-off-by: Paulo Alcantara Signed-off-by: Sasha Levin commit 6518320da9028bde5659d1ffb706980740e0bbd6 Author: Florian Eckert Date: Thu Oct 1 09:01:56 2026 -0700 tools/thermal/tmon: Fix compilation warning for wrong format commit 9da39ef332c417ce52732564c1c682a6e1209302 upstream. The following warnings are shown during compilation: tui.c: In function 'show_cooling_device': tui.c:216:40: warning: format '%d' expects argument of type 'int', but argument 7 has type 'long unsigned int' [-Wformat=] 216 | "%02d %12.12s%6d %6d", | ~~^ | | | int | %6ld ..... 219 | ptdata.cdi[j].cur_state, | ~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int tui.c:216:44: warning: format '%d' expects argument of type 'int', but argument 8 has type 'long unsigned int' [-Wformat=] 216 | "%02d %12.12s%6d %6d", | ~~^ | | | int | %6ld ..... 220 | ptdata.cdi[j].max_state); | ~~~~~~~~~~~~~~~~~~~~~~~ | | | long unsigned int To fix this, the correct string format must be used for printing. Signed-off-by: Florian Eckert Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20231204141335.2798194-1-fe@dev.tdt.de Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit bc585d5a381ab49cb611c35dda93a997214ca874 Author: Namjae Jeon Date: Wed Sep 30 14:41:55 2026 -0400 smb: client: use finish_no_open() for non-regular inodes [ Upstream commit e66cf1625ec4a3fe68346119f371def713fd0a4d ] An O_CREAT open can find an existing symlink or another non-regular inode. cifs_atomic_open() calls finish_open() on it and attaches a cifsFileInfo. Symlink inodes have no CIFS release operation, so the dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also prevents the VFS from following the symlink. Track whether cifs_do_create() returned an open server handle. For non-regular inodes, close the handle if present, remove the pending open, and call finish_no_open() so the VFS can continue the lookup. Do not set FMODE_CREATED unless a regular file was opened. For O_NOFOLLOW with __O_REGULAR, return -ELOOP before the VFS's -EFTYPE check. Defer closing a legacy POSIX handle on a non-regular inode until after inode lookup. This avoids closing it again if lookup fails. Fixes: d2c127197dfc ("cifs: implement i_op->atomic_open()") Signed-off-by: Namjae Jeon Signed-off-by: Paulo Alcantara Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 9de940a3c5731be5a544f6f366576cc4dc073f7c Author: Guangshuo Li Date: Wed Sep 30 09:07:06 2026 -0400 net: ena: fix MMIO read buffer leak on probe failure [ Upstream commit 9476b4468862927297c94c440863cd8ed1e7cc83 ] ena_device_init() initializes the MMIO read mechanism with ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA buffer for MMIO read responses. The normal removal path releases this buffer through ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails after ena_device_init() succeeds, the error path destroys the admin resources and eventually frees ena_dev without destroying the MMIO read request, leaving the coherent DMA buffer allocated. Call ena_com_mmio_reg_read_request_destroy() in the probe error path before releasing the remaining device resources. This issue was found by manual code inspection. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260921154202.471662-3-lgs201920130244@gmail.com Signed-off-by: Jakub Kicinski [ adjusted context for missing PHC, devlink, and customer-metrics cleanup in Linux 5.10. ] Signed-off-by: Sasha Levin commit 3579081fcfeb9a136638fa3f8c8d4aa5f0dd7f55 Author: Ilya Titov Date: Wed Sep 30 07:19:31 2026 -0400 pinctrl: sunxi: keep a shadow copy of the data register output latches [ Upstream commit a13f7f5d14af9baf34eb12c25962f8d3542b281d ] On Allwinner SoCs, reading a bank's data register returns the pin level, not the output latch, for pins that are muxed as inputs. Writing a GPIO therefore corrupts the output latches of all input-muxed pins in the same bank: the read-modify-write in sunxi_pinctrl_gpio_set() reads back their pin levels and writes those into their latches. This breaks emulated open-drain lines (e.g. a bit-banged I2C bus from i2c-gpio). Such a line is released high by muxing it as input and letting the pull-up raise it, so any concurrent GPIO write in the same bank stores 1 into its latch. Driving the line low afterwards is a non-atomic data-then-mux sequence in sunxi_pinctrl_gpio_direction_output(); if the poisoning write lands between the two steps, the pin actively drives high (push-pull) instead of low. Observed in practice as sporadic glitches on a T507 board bit-banging I2C on port E while other PE GPIOs are toggled. On a scope the failure is unmistakable: on a clock pulse where SCL should fall to GND, the line instead steps *above* its idle high level for the whole low phase — the pad drives a strong push-pull 3.3 V high, higher than the level the pull-up sustains on the loaded bus — before the next transition recovers it. The same can hit SDA, corrupting data instead of clocks. Steps to reproduce on any sunxi board with a bit-banged (i2c-gpio) bus: # background: toggle any other GPIO of the same bank, e.g. line 21 gpioset -c --toggle 100us 21=0 & # foreground: keep the bit-banged bus busy while :; do i2cdetect -y 0x50 0x57; done # watch SCL/SDA with a scope or logic analyzer: sporadic clock-low # phases driven high (above the pull-up level) instead of low The bank spinlock cannot help: the racing write is a perfectly valid whole-register RMW that faithfully writes back what the hardware returned. There are no set/clear registers on this IP to write a single bit atomically. Fix it the same way gpio-mmio handles hardware whose data register read does not return the output latch: keep a shadow copy of each bank's latches, base the read-modify-write on the shadow, and only write the register. The shadow is seeded from the hardware at probe time so pins left in output mode by the bootloader keep their state. Pins that reach output mode through the gpiolib paths write their value (and thereby their shadow bit) before the mux switch in sunxi_pinctrl_gpio_direction_output(); pins muxed to gpio_out directly through a pinmux node bypass that path, so sunxi_pmx_set() refreshes their shadow bit from the latch (readable once the pin is in output mode) to keep them driving their pre-existing level. Seeding the shadow reads the PIO registers at probe time, which requires the bus clock to be enabled. The clock was only requested at the very end of probe, after devm_pinctrl_register() had already claimed the pin hogs described in the device tree - which mux pins, and thus access registers, with the clock still gated. Move the request ahead of both. Boards whose bootloader leaves the PIO clock running are unaffected, which is why the pre-existing hog problem has gone unnoticed since commit 950707c0eb5c ("pinctrl: sunxi: add clock support"). Fixes: df7b34f4c3d2 ("pinctrl: sunxi: Fix gpio_set behaviour") Cc: stable@vger.kernel.org Signed-off-by: Ilya Titov Signed-off-by: Linus Walleij [ Removed the pctl argument from two sunxi_data_reg() calls to match the older four-argument API. ] Signed-off-by: Sasha Levin commit 357d472979733e49d1d81e3fdd0160e7d53b695b Author: Wang Jianzheng Date: Wed Sep 30 07:19:30 2026 -0400 pinctrl: sunxi: Use devm_clk_get_enabled() helpers [ Upstream commit 7dc92ece32ed87a352e285e3d9f0d392b61443e2 ] sunxi sunxi_pinctrl_init_with_variant get, enable clk and deinit_device disable and unprepare it. This simplifes the code and avoids the calls to clk_disable_unprepare(). Signed-off-by: Wang Jianzheng Link: https://lore.kernel.org/20240829064737.16169-1-wangjianzheng@vivo.com Signed-off-by: Linus Walleij Stable-dep-of: a13f7f5d14af ("pinctrl: sunxi: keep a shadow copy of the data register output latches") Signed-off-by: Sasha Levin commit 2dc3eaf4e85be8adc2f0ea6c001d2ffd117b2f77 Author: Samuel Holland Date: Wed Sep 30 07:19:29 2026 -0400 pinctrl: sunxi: Refactor register/offset calculation [ Upstream commit 0bb95ae2672f9e00f471598a515bf4e9c2005046 ] Starting with the D1/D1s/T113 SoC, Allwinner changed the layout of the pinctrl registers. This new layout widens the drive level field, which affects the pull register offset and the overall bank size. As a first step to support this, combine the register and offset calculation functions, and refactor the math to depend on one constant for field widths instead of three. This minimizes the code size impact of making some of the factors dynamic. While rewriting these functions, move them to the implementation file, since that is the only file where they are used. And make the comment more generic, without mentioning specific offsets/sizes. The callers are updated to expect a shifted mask, and to use consistent terminology (reg/shift/mask/val). Reviewed-by: Heiko Stuebner Reviewed-by: Jernej Skrabec Tested-by: Heiko Stuebner Signed-off-by: Samuel Holland Link: https://lore.kernel.org/r/20220713025233.27248-5-samuel@sholland.org Signed-off-by: Linus Walleij Stable-dep-of: a13f7f5d14af ("pinctrl: sunxi: keep a shadow copy of the data register output latches") Signed-off-by: Sasha Levin commit e0a221cec0e0ee437680ae0314a4b166509442c5 Author: Yuqi Xu Date: Tue Sep 29 22:38:39 2026 -0400 net: ipconfig: bound DHCP option construction [ Upstream commit e47a1958e12abc3a17b5231a4f21c8f1bf662e08 ] ic_dhcp_init_options() appends the hostname (option 12), vendor-class (option 60) and client-ID (option 61) options into the fixed 312-byte bootp_pkt.exten[] buffer. Only the client-ID branch checked the remaining space; the hostname and vendor-class writes were unbounded. A 64-byte hostname together with the maximum 252-byte dhcpclass= identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available bytes even before the terminating END marker, so the vendor-class memcpy runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is reported as a field-spanning write and, when the kernel is booted with panic_on_warn=1, aborts boot with a panic. Route the optional options through a common helper that makes sure the option, its 2-byte header and the END marker all fit and drops an option that would not. Configurations with short options keep sending exactly the same bytes as before. Fixes: 130c0f47fdf9 ("ipconfig: send host-name in DHCP requests") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Signed-off-by: Yuqi Xu Reviewed-by: Ren Wei Reviewed-by: Simon Horman Link: https://patch.msgid.link/7808dfbfa2162dfd0b19f59aff5742d6e0db2abb.1789798023.git.xuyuqiabc@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 09d9443ec3b2e672032ed8d7b93460e216f57e6b Author: Thorsten Blum Date: Tue Sep 29 22:38:38 2026 -0400 net: ipconfig: Remove outdated comment and indent code block [ Upstream commit e405b3c9d4aaa10972525fe2ea5cf94224020561 ] The comment has been around ever since commit 1da177e4c3f4 ("Linux-2.6.12-rc2") and can be removed. Remove it and indent the code block accordingly. Signed-off-by: Thorsten Blum Link: https://patch.msgid.link/20260109121128.170020-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski Stable-dep-of: e47a1958e12a ("net: ipconfig: bound DHCP option construction") Signed-off-by: Sasha Levin commit 6d6e9291413fda06588846cbbf09b789a0e948fa Author: Peiyang He Date: Tue Sep 29 14:47:19 2026 -0400 drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked() [ Upstream commit 6a6870d3077faa501ca97760057ddca22b68418d ] nouveau_bo_pin_locked() checks whether an already pinned BO is in a memory domain compatible with a new pin request. When the domains are incompatible, it sets -EBUSY but still calls ttm_bo_pin() before returning. Callers treat a failed nouveau_bo_pin() as not having acquired a new pin, so the extra pin count is never decreased by a matching unpin. This triggers the warning in ttm_bo_release(): WARN_ON_ONCE(bo->pin_count); Found when fuzzing the nouveau driver with a modified Syzkaller: WARNING: drivers/gpu/drm/ttm/ttm_bo.c:256 at ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256, CPU#1: syz.3.24/2212 Modules linked in: CPU: 1 UID: 0 PID: 2212 Comm: syz.3.24 Not tainted 7.2.0 #24 PREEMPT(lazy) nouveau 0000:01:00.0: gsp:msg fn:103 len:0x40/0x20 res:0x19 resp:0x19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:ttm_bo_release+0x827/0x9e0 drivers/gpu/drm/ttm/ttm_bo.c:256 Code: 02 00 0f 85 51 01 00 00 48 8b 7b 08 e8 d2 20 01 00 e9 80 fd ff ff e8 d8 15 c0 fe 90 0f 0b 90 e9 e1 f8 ff ff e8 ca 15 c0 fe 90 <0f> 0b 90 e9 a4 f8 ff ff e8 bc 15 c0 fe be 03 00 00 00 4c 89 e7 e8 msg: 00000000: 05 00 d0 c1 04 00 f0 f1 01 30 00 00 2d 90 00 00 .........0..-... RSP: 0018:ffffc9000f5cf710 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888018e5d2a8 RCX: ffffffff82bb1b36 RDX: ffff888017b68000 RSI: 0000000000000004 RDI: ffff888018e5d2a8 msg: 00000010: 19 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ RBP: ffff88801261c720 R08: 0000000000000001 R09: ffffed10031cba55 R10: ffff888018e5d2ab R11: 00000000000000f3 R12: ffff888018e5d290 R13: ffff888018e5d2d4 R14: ffff88801b219c18 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880e0f6f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31223ffc CR3: 0000000028e00005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: kref_put include/linux/kref.h:65 [inline] ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:325 [inline] ttm_bo_fini+0x55/0x80 drivers/gpu/drm/ttm/ttm_bo.c:330 nouveau_gem_object_del+0xb2/0x1b0 drivers/gpu/drm/nouveau/nouveau_gem.c:90 drm_gem_object_free+0x5f/0x90 drivers/gpu/drm/drm_gem.c:1165 kref_put include/linux/kref.h:65 [inline] __drm_gem_object_put include/drm/drm_gem.h:562 [inline] drm_gem_object_put include/drm/drm_gem.h:575 [inline] nouveau_abi16_chan_fini.constprop.0+0x44f/0x5a0 drivers/gpu/drm/nouveau/nouveau_abi16.c:195 nouveau 0000:01:00.0: syz.2.23[2209]: Unknown handle 0x00000000 nouveau_abi16_fini+0x1d0/0x340 drivers/gpu/drm/nouveau/nouveau_abi16.c:225 nouveau_drm_postclose+0x18b/0x3e0 drivers/gpu/drm/nouveau/nouveau_drm.c:1284 nouveau 0000:01:00.0: syz.2.23[2209]: validate_init drm_file_free.part.0+0x6d6/0xb60 drivers/gpu/drm/drm_file.c:267 drm_file_free drivers/gpu/drm/drm_file.c:237 [inline] drm_close_helper.isra.0+0x11a/0x160 drivers/gpu/drm/drm_file.c:290 drm_release+0x1ab/0x330 drivers/gpu/drm/drm_file.c:438 __fput+0x39c/0xa60 fs/file_table.c:512 nouveau 0000:01:00.0: syz.2.23[2209]: validate: -2 task_work_run+0x15a/0x230 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x82b/0x25a0 kernel/exit.c:1009 do_group_exit+0xc2/0x280 kernel/exit.c:1152 get_signal+0x1d6e/0x1f30 kernel/signal.c:3046 arch_do_signal_or_restart+0x7d/0x6e0 arch/x86/kernel/signal.c:337 __exit_to_user_mode_loop kernel/entry/common.c:66 [inline] exit_to_user_mode_loop+0xdf/0x440 kernel/entry/common.c:101 __exit_to_user_mode_prepare include/linux/irq-entry-common.h:207 [inline] syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:230 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:318 [inline] do_syscall_64+0x4f8/0x690 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f12bac8594d Code: Unable to access opcode bytes at 0x7f12bac85923. RSP: 002b:00007f12b96e70d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: 0000000000000001 RBX: 00007f12baf15fa8 RCX: 00007f12bac8594d RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00007f12baf15fac RBP: 00007f12baf15fa0 R08: 00007f12baee8000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f12baf16038 R14: 0000000000000006 R15: 00007ffe2ed394b0 irq event stamp: 47867 hardirqs last enabled at (47883): [] __up_console_sem+0x66/0x70 kernel/printk/printk.c:347 hardirqs last disabled at (47892): [] __up_console_sem+0x4b/0x70 kernel/printk/printk.c:345 softirqs last enabled at (47880): [] __do_softirq kernel/softirq.c:656 [inline] softirqs last enabled at (47880): [] invoke_softirq kernel/softirq.c:496 [inline] softirqs last enabled at (47880): [] __irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735 softirqs last disabled at (47875): [] __do_softirq kernel/softirq.c:656 [inline] softirqs last disabled at (47875): [] invoke_softirq kernel/softirq.c:496 [inline] softirqs last disabled at (47875): [] __irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735 Fix by calling ttm_bo_pin() only when the existing placement is compatible with the new pin request. This matches the correct behavior in other DRM drivers such as amdgpu_bo_pin() in amdgpu. Cc: stable@vger.kernel.org Fixes: ad76b3f7c7a0 ("drm/nouveau: teach nouveau_bo_pin() how to force a contig vram allocation") Signed-off-by: Peiyang He Assisted-by: LLM Reviewed-by: Lyude Paul Signed-off-by: Lyude Paul Link: https://patch.msgid.link/EACEF2F4E098413F+20260918025312.2814889-1-peiyang_he@smail.nju.edu.cn Signed-off-by: Sasha Levin commit 8ac53650b9ff275634f2da3e06041fa2c6d4b325 Author: Christian König Date: Tue Sep 29 14:47:18 2026 -0400 drm/nouveau: switch over to the new pin interface [ Upstream commit 6797cea18d3982fce6a7d63e51b4cea0e3c8eb06 ] Stop using TTM_PL_FLAG_NO_EVICT. Signed-off-by: Christian König Reviewed-by: Dave Airlie Reviewed-by: Huang Rui Link: https://patchwork.freedesktop.org/patch/391606/?series=81973&rev=1 Stable-dep-of: 6a6870d3077f ("drm/nouveau: don't bump pin count on failed re-pin in nouveau_bo_pin_locked()") Signed-off-by: Sasha Levin commit 99a109b189fb0ffc45f7737a8cae020cc4905f86 Author: Arnaldo Carvalho de Melo Date: Thu Oct 1 09:01:14 2026 -0700 perf test bpf: Address error about non-null argument for epoll_pwait 2nd arg commit ed847e30f001b207013b6136c264454d7560557f upstream. First noticed on Fedora Rawhide: tests/bpf.c: In function ‘epoll_pwait_loop’: tests/bpf.c:36:17: error: argument 2 null where non-null expected [-Werror=nonnull] 36 | epoll_pwait(-(i + 1), NULL, 0, 0, NULL); | ^~~~~~~~~~~ In file included from tests/bpf.c:5: /usr/include/sys/epoll.h:134:12: note: in a call to function ‘epoll_pwait’ declared ‘nonnull’ 134 | extern int epoll_pwait (int __epfd, struct epoll_event *__events, | ^~~~~~~~~~~ [perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/13/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,d,m2,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-gcc-major-version-only --enable-libstdcxx-backtrace --with-libstdcxx-zoneinfo=/usr/share/zoneinfo --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --with-isl=/builddir/build/BUILD/gcc-13.2.1-20230728/obj-x86_64-redhat-linux/isl-install --enable-offload-targets=nvptx-none --without-cuda-driver --enable-offload-defaulted --enable-gnu-indirect-function --enable-cet --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux --with-build-config=bootstrap-lto --enable-link-serialization=1 Thread model: posix Supported LTO compression algorithms: zlib zstd gcc version 13.2.1 20230728 (Red Hat 13.2.1-1) (GCC) [perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$ Just add that argument to address this compiler warning. Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/lkml/ZMj8+bvN86D0ZKiB@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit 5bdd794315a91881a9f14d8d767c483643daccce Author: Namhyung Kim Date: Thu Oct 1 09:01:13 2026 -0700 perf tools: Fix a asan issue in parse_events_multi_pmu_add() commit 66c9598bd8916c6c1319d0100ac916cac89d4b0e upstream. In the parse_events_multi_pmu_add() it passes the 'config' variable twice to parse_events_term__num() - one for config and another for loc_term. I'm not sure about the second one as it's converted to YYLTYPE variable. Asan reports it like below: In function ‘parse_events_term__num’, inlined from ‘parse_events_multi_pmu_add’ at util/parse-events.c:1602:6: util/parse-events.c:2653:64: error: array subscript ‘YYLTYPE[0]’ is partly outside array bounds of ‘char[8]’ [-Werror=array-bounds] 2653 | .err_term = loc_term ? loc_term->first_column : 0, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ util/parse-events.c: In function ‘parse_events_multi_pmu_add’: util/parse-events.c:1587:15: note: object ‘config’ of size 8 1587 | char *config; | ^~~~~~ cc1: all warnings being treated as errors Signed-off-by: Namhyung Kim Acked-by: Ian Rogers Cc: Adrian Hunter Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Leo Yan Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20230331202949.810326-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo [florian: Resolve conflict in parse_events_multi_pmu_add() where term initialization is located inside the PMU scan loop in 5.10.y] Signed-off-by: Florian Fainelli Signed-off-by: Sasha Levin commit 34245048d6c1fa6d7be4f0dec1d14b5be02360e1 Author: Zihan Xi Date: Wed Sep 30 13:49:01 2026 -0400 smb: client: fix create context out-of-bounds reads [ Upstream commit 67f4c1c6a1b51e203d986779299824d1c2c590a6 ] smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open. Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases") Fixes: f047390a097e ("CIFS: Add create lease v2 context for SMB3") Fixes: 89a5bfa350fa ("smb3: optimize open to not send query file internal info") Cc: stable@vger.kernel.org Reported-by: Vega Assisted-by: LLM Co-developed-by: Luxing Yin Signed-off-by: Luxing Yin Signed-off-by: Zihan Xi Tested-by: Frank Sorenson Signed-off-by: Paulo Alcantara Signed-off-by: Sasha Levin commit ffa544903b8d97f9c13432971bc46e8059f32628 Author: Steve French Date: Wed Sep 30 13:49:00 2026 -0400 smb3: make query_on_disk_id open context consistent and move to common code [ Upstream commit 1149c8467ddebfb6bb9aab37830f70a49cab7085 ] cifs and ksmbd were using a slightly different version of the query_on_disk_id struct which could be confusing. Use the ksmbd version of this struct, and move it to common code. Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French [5.15 dependency adaptation for 67f4c1c6a1b: Keep the create-context declarations in the existing per-subsystem headers. This tree has not consolidated create_context into smbfs_common, and ksmbd still defines its own SMB2 headers. Moving the response into the common header would require unrelated header conversions. Retain the client response rename and match ksmbd's 16-byte Reserved array, without changing the packed wire layout. Leave the ksmbd and common headers unchanged and omit the upstream common-header lease comments. Rename the client's lease-break flag and both existing parser uses to the upstream _LE spelling. This is a value-preserving prerequisite for the target's lease-parser changes; no functions are added.] [ sashal: Reduced backport -- upstream 1149c8467ddeb touches 4 file(s), this backport carries 3. Not backported here: fs/ksmbd/smb2pdu.h fs/smbfs_common/smb2pdu.h This note is generated from the file lists only; see the resolution record for the reasoning. ] Stable-dep-of: 67f4c1c6a1b5 ("smb: client: fix create context out-of-bounds reads") Signed-off-by: Sasha Levin commit f53d13a286fb275bda0efdf445b8a1e4dfcb717b Author: Ilya Maximets Date: Wed Sep 30 09:12:45 2026 -0400 net: openvswitch: conntrack: fix helper UAF due to extensions realloc [ Upstream commit 1a4151e6be57b098b7a5ebfbde58585e83200cdc ] While calling the helpers, a raw pointer to the extensions area is wired into expectations list: -> nf_ct_helper() -> helper->help() -> nf_ct_expect_related_report() -> nf_ct_expect_insert() -> hlist_add_head_rcu(&exp->lnode, &master_help->expectations) In case the connection is not confirmed yet, more extensions can be added afterwards with *_ext_add() calls reallocating the extension space and leaving the now invalid pointer in the expectations list that is later accessed while removing the expectation. Make sure that helpers are called at the end after all the other extensions are already added. Note that the helper rejection now leaves the mark and labels set, but that's not different from how the NAT was handled before or how the mark and the labels were handled on confirmation failure. And there are no atomicity guarantees provided by the API anyway. Fixes: cae3a2627520 ("openvswitch: Allow attaching helpers to ct action") Cc: stable@vger.kernel.org Reported-by: Axel Mierczuk Signed-off-by: Ilya Maximets Reviewed-by: Aaron Conole Link: https://patch.msgid.link/20260921145655.3167436-4-i.maximets@ovn.org Signed-off-by: Jakub Kicinski [ adapted nf_ct_helper() calls to the existing ovs_ct_helper() API. ] Signed-off-by: Sasha Levin commit badedec499f6320742368c73fa77cd63dcf8ca55 Author: Jinjiang Tu Date: Tue Sep 29 15:47:38 2026 -0400 mm/rmap: fix missing barrier between anon_vma init and vma->anon_vma publish [ Upstream commit b6ac0b3f6013c168f22cad97e79967accacb08e1 ] On arm64 server, we find that a task trying to grab the anon_vma lock triggers hungtask. INFO: task main:2354726 blocked for more than 120 seconds. Tainted: G E 5.10.0-0021.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:main state:D stack: 0 pid:2354726 ppid:2350673 flags:0x00000a01 Call trace: __switch_to+0x7c/0xbc __schedule+0x3b4/0x8a0 schedule+0x50/0xe0 rwsem_down_write_slowpath+0x3cc/0x6cc down_write+0x60/0x260 __anon_vma_prepare+0x6c/0x210 do_anonymous_page+0x258/0x660 handle_pte_fault+0x188/0x214 __handle_mm_fault+0x1b0/0x380 handle_mm_fault+0xf4/0x284 do_page_fault+0x19c/0x494 do_translation_fault+0xcc/0xf8 do_mem_abort+0x48/0xac el0_da+0x44/0x80 el0_sync_handler+0x88/0xb4 el0_sync+0x160/0x180 After analyzing the vmcore, we found the anon_vma->root->rwsem.count is -1. There is another anon_vma whose anon_vma->root->rwsem.count is 1, the anon_vma->root->rwsem.owner shows the lock is held, but the stack of the task shows the task doesn't hold the anon_vma lock. After adding more debugging info, we found __anon_vma_prepare() reuses anon_vma and triggers the UAF of anon_vma->root due to missing memory barrier, leading to locking and unlocking two different anon_vma->root, thus leading to an anon_vma will never be unlocked, and another anon_vma couldn't be locked anymore. This race requires two adjacent VMAs that are not merged but are anon_vma-compatible (e.g., they differ in VMA_ACCESS_FLAGS that can be changed by mprotect()). Two threads fault on each VMA concurrently, both calling __anon_vma_prepare() with only mmap_lock held for reading. THREAD A THREAD B __anon_vma_prepare __anon_vma_prepare find_mergeable_anon_vma() -> NULL anon_vma = anon_vma_alloc(); anon_vma->root = anon_vma; // the two stores may be reordered vma->anon_vma = anon_vma; // finds A's anon_vma anon_vma = find_mergeable_anon_vma(vma); anon_vma_lock_write(anon_vma); // may still see the old root down_write(&anon_vma->root->rwsem); anon_vma_unlock_write(anon_vma); // see the new root, never unlock old up_write(&anon_vma->root->rwsem); thread A triggers page fault and calls __anon_vma_prepare() to prepare anon_vma for the faulting vma. __anon_vma_prepare() allocates and initializes a new anon_vma, and then publishes it to the vma with a plain store. anon_vma_prepare() only requires the mmap_lock to be held for reading, so two threads can fault on adjacent VMAs at the same time. While thread A publishes a new anon_vma, thread B could find the anon_vma via find_mergeable_anon_vma() and then locks anon_vma->root->rwsem. The store to anon_vma->root in anon_vma_alloc() and the store to vma->anon_vma can be reordered. The anon_vma_lock_write() and spin_lock() only provide acquire semantics, which do not prevent prior stores from being reordered after them. The release semantics of the corresponding spin_unlock() and anon_vma_unlock_write() come too late, the store to vma->anon_vma is already published before they take effect. As a result, thread B can observe the following order: vma->anon_vma = anon_vma; anon_vma->root = anon_vma; The anon_vma slab is SLAB_TYPESAFE_BY_RCU, so a newly allocated anon_vma may reuse memory from a previously freed one. The constructor (anon_vma_ctor) does not reset anon_vma->root, and __put_anon_vma() doesn't clear it either, so the old root value persists until anon_vma_alloc() overwrites it. If that store isn't visible, thread B reads a root that points to the old anon_vma and locks it. As a result, thread B can call anon_vma_lock_write() with the old root, and call anon_vma_unlock_write() with the new root, leading to an anon_vma will never be unlocked, and another anon_vma couldn't be locked anymore (its count is dropped from 0 to -1 due to wrong unlock). To fix it, change the plain store `vma->anon_vma = anon_vma` to store release, so that the fields of anon_vma are visible before anon_vma is published to vma->anon_vma. At read side, the load of anon_vma and anon_vma->root have address dependency. According to Documentation/memory-barriers.txt and some investigations, only Alpha needs address-dependency barriers and it has been handled by READ_ONCE() in reusable_anon_vma(). We reproduced this issue in v5.10 with KSM enabled. The kernel doesn't merge commit cf7e7a3503df ("mm: prevent KSM from breaking VMA merging for new VMAs"), so there are many adjacent VMAs that aren't merged but are compatible for anon_vma. Without this fix, our production environment could reproduce this issue about 2-5 times each month. After adding a smp_mb() before anon_vma_lock_write(anon_vma) in __anon_vma_prepare(), which is different to this patch, this issue hasn't been reproduced for one month. Link: https://lore.kernel.org/20260908122924.554373-1-tujinjiang@huawei.com Fixes: 5c341ee1dfc8 ("mm: track the root (oldest) anon_vma") Signed-off-by: Jinjiang Tu Signed-off-by: Andrew Morton Reviewed-by: Lance Yang Reviewed-by: Lorenzo Stoakes (ARM) Acked-by: David Hildenbrand (Arm) Acked-by: Vlastimil Babka (SUSE) Cc: Minchan Kim Cc: Harry Yoo Cc: Hiroyouki Kamezawa Cc: Jann Horn Cc: Jinjiang Tu Cc: Kefeng Wang Cc: Larry Woodman Cc: Liam R. Howlett Cc: Nanyong Sun Cc: Rik van Riel Cc: [ adjusted context for mm/mmap.c and the existing anon_vma_chain_link() helper. ] Signed-off-by: Sasha Levin commit 235ab713d387671d65baa5a11c65e7b68a1f3210 Author: Dapeng Mi Date: Thu Sep 10 20:29:22 2026 -0400 perf/x86/intel: Remove anythread_deprecated bit from perf_capabilities [ Upstream commit 8767b4d73018bd3143f4c55b672064fad292f11b ] AnyThread mode deprecation is enumerated by CPUID.0AH:EDX[15] instead of PERF_CAPABILITIES MSR. It's not a good practice to define a bit to represent "anythread deprecation" in perf_capabilities. It leads to the anythread_deprecated bit could be overwritten by the real value of PERF_CAPABILITIES MSR, just like the below code in update_pmu_cap() does. if (!intel_pmu_broken_perf_cap()) { /* Perf Metric (Bit 15) and PEBS via PT (Bit 16) are hybrid enumeration */ rdmsrq(MSR_IA32_PERF_CAPABILITIES, hybrid(pmu, intel_cap).capabilities); } It leads to the anythread_deprecated bit is cleared to 0 and the "any" attribute is incorrectly shown in the /sys/devices/cpu/format/ folder on these support Perfmon v6 platforms, like Clearwater Forest. $ grep . /sys/devices/cpu/format/* /sys/devices/cpu/format/acr_mask:config2:0-63 /sys/devices/cpu/format/any:config:21 /sys/devices/cpu/format/cmask:config:24-31 So remove the anythread_deprecated bit from perf_capabilities structure and directly depends on CPUID.0AH:EDX[15] to judge if anythread is deprecated. Fixes: cadbaa039b99 ("perf/x86/intel: Make anythread filter support conditional") Reported-by: Namhyung Kim Signed-off-by: Dapeng Mi Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Zide Chen Reviewed-by: Thomas Falcon Acked-by: Namhyung Kim Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260616044654.3468742-2-dapeng1.mi@linux.intel.com Signed-off-by: Sasha Levin commit 6d2ccd1b810654ec4d26ccda0482283ffe22dda2 Author: Wentao Liang Date: Tue Sep 29 12:41:05 2026 -0400 drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show() [ Upstream commit 2b86ab1bd6673c525adda88819d7658ba9e784ec ] amdgpu_debugfs_test_ib_show() resumes the device with pm_runtime_get_sync() before taking the reset domain semaphore with down_write_killable(). If the write lock acquisition is interrupted, the function returns without calling pm_runtime_put_autosuspend(), leaking the runtime PM reference acquired for the device and keeping the GPU awake. Drop the runtime PM reference on the interrupted down_write_killable() error path before returning. Fixes: 6049db43d6dd ("drm/amdgpu: change reset lock from mutex to rw_semaphore") Signed-off-by: Wentao Liang Signed-off-by: Alex Deucher (cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8) Cc: stable@vger.kernel.org [ Adapted `down_write_killable(&adev->reset_domain->sem)` to `down_read_killable(&adev->reset_sem)`. ] Signed-off-by: Sasha Levin commit bf785a303e5faad16439c563826a07cb811856c8 Author: Willem de Bruijn Date: Tue Sep 29 12:34:43 2026 -0400 tcp: prevent collapsing skbs across boundary in rtx queue [ Upstream commit fc6d80eb504458d6416b75a94188b268c95c6533 ] tcp_write_collapse_fence() sets TCP_SKB_CB(skb)->eor = 1 on tcp_write_queue_tail(sk) to prevent skbs queued after a switch to device encryption from being collapsed into earlier skbs. The fence is a no-op if all earlier data has already been transmitted when the switch happens: sk->sk_write_queue is empty. The not yet acknowledged earlier skbs wait in sk->tcp_rtx_queue with eor 0. On a subsequent retransmit or SACK shift, tcp_retrans_try_collapse() or tcp_shift_skb_data() can then merge an skb queued after the switch into one queued before it. Both users of the fence are affected: - psp: devices only encrypt skbs with skb->decrypted set. The merged skb keeps decrypted = 0 from the earlier skb, so merged data sent after psp_sock_assoc_set_tx() is retransmitted in cleartext. - tls device offload: the merged skb straddles the start marker set in tls_set_device_offload(). The software fallback (fill_sg_in() returns -EINVAL) and the mlx5, nfp and funeth drivers cannot handle such an skb and drop it. Every retransmit rebuilds the same skb, so the connection stalls. Fix this in two places, for defense in depth: 1. Fall back to tcp_rtx_queue_tail(sk) in tcp_write_collapse_fence() when tcp_write_queue_tail(sk) is NULL. 2. Check !skb_cmp_decrypted(to, from) in tcp_skb_can_collapse(), as tcp_skb_can_collapse_rx() does on receive. skb_shift(), which both collapse paths call, already has a DEBUG_NET_WARN_ON_ONCE() for this condition. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Willem de Bruijn Reviewed-by: Eric Dumazet Reviewed-by: Daniel Zahka Link: https://patch.msgid.link/20260924154427.953800-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski [ inlined logic for missing skb_cmp_decrypted() and tcp_write_collapse_fence() helpers into existing functions. ] Signed-off-by: Sasha Levin commit c295f6505aec085d73e8dcea9f648c8af1b9da8c Author: Paulo Alcantara Date: Tue Sep 22 15:40:43 2026 -0400 smb: client: fix smbd_connection leak on cifs_get_tcp_session() error [ Upstream commit e75c96157d45e498970158c8f7373d90102e33b9 ] When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally. Closes: https://sashiko.dev/#/patchset/20260912165503.521597-1-pc%40manguebit.org Fixes: 2f8946464b11 ("CIFS: SMBD: Upper layer connects to SMBDirect session") Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara Cc: Tom Talpey Cc: Stefan Metzmacher Cc: Shyam Prasad N Cc: Ronnie Sahlberg Cc: Bharath SM Cc: Namjae Jeon Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 915298dbb766d2311b0822ab6ef24780def0bd53 Author: Fan Wu Date: Tue Sep 22 15:55:10 2026 -0400 wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown [ Upstream commit d9be5e75530772fc31637070d51e5717d6aeaa2a ] wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(), which only dequeues the timer and does not wait for a callback that is already executing; the preceding free_irq() calls synchronize the interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can therefore be running past the teardown and use the wcn freed along with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock, reads wcn->tx_ack_skb and passes wcn->hw to ieee80211_tx_status_irqsafe(). Fix this by using timer_shutdown_sync(), which waits for a running callback and also prevents the timer from being rearmed again. The timer is set up again by wcn36xx_dxe_init() on the next start, so the start/stop cycle is unaffected. This issue was found by an in-house static analysis tool. Fixes: fdf21cc37149 ("wcn36xx: Add TX ack support") Cc: stable@vger.kernel.org Assisted-by: LLM Co-developed-by: Song Li Signed-off-by: Song Li Signed-off-by: Fan Wu Reviewed-by: Loic Poulain Link: https://patch.msgid.link/20260910020907.3353-1-fanwu01@zju.edu.cn Signed-off-by: Jeff Johnson [ Replaced unavailable timer_shutdown_sync() with timer_delete_sync(). ] Signed-off-by: Sasha Levin commit b2876193a150301993ab2f88afde07568e4de9c7 Author: Tzung-Bi Shih Date: Tue Sep 22 14:31:02 2026 -0400 watchdog: rtd119x: Avoid division by zero [ Upstream commit 5af7d2cbd20f893def03c8310a460ade66a5d822 ] clk_get_rate() could return 0. Avoid a division by zero panic. Fixes: 2bdf6acbfead ("watchdog: Add Realtek RTD1295") Cc: stable@vger.kernel.org Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260913064851.8239-3-tzungbi@kernel.org Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit faf8c62887fedbba19aa341a5652a4a6f3df94b1 Author: Christophe JAILLET Date: Tue Sep 22 14:31:01 2026 -0400 watchdog: rtd119x: Use devm_clk_get_enabled() helper [ Upstream commit 6cc0768ba6f5293a4435612164a2cfbf2edbd025 ] The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the need of a dedicated function used with devm_add_action_or_reset(). Signed-off-by: Christophe JAILLET Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/14b521b821279bc5111dc80b55d0936c5767c737.1672418470.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Stable-dep-of: 5af7d2cbd20f ("watchdog: rtd119x: Avoid division by zero") Signed-off-by: Sasha Levin commit 3667e20bdfe5598c6c7125ad42e7943fd846806b Author: Paulo Alcantara Date: Thu Sep 17 09:10:39 2026 -0400 smb: client: fix file type corruption in cifs_reparse_point_to_fattr() [ Upstream commit 6bd360447941357e959414a525aa62576a448116 ] Setting the file type in cf_mode without clearing the existing S_IFMT bits first is wrong as it corrupts the file type when cf_mode already has type bits set (e.g. S_IFREG | S_IFLNK == S_IFDIR | S_IFREG). Clear S_IFMT before setting S_IFLNK for native and SMB1 symlinks. Closes: https://sashiko.dev/#/patchset/20260906181540.647469-1-pc%40manguebit.org Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara Cc: Ronnie Sahlberg Cc: Shyam Prasad N Cc: Tom Talpey Cc: Bharath SM Cc: stable@vger.kernel.org [ Moved the fix from missing reparse.c to smb311_posix_info_to_fattr() in inode.c. ] Signed-off-by: Sasha Levin commit 7f96803f612134f585ab3b39e6d5b2d4b9c0606f Author: Fan Wu Date: Wed Sep 16 22:18:44 2026 -0400 hwmon: (gpio-fan) Fix use-after-free in alarm work [ Upstream commit a2471ed17b0e6ff7bfb6b2ea8e6e5b04c309d293 ] fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing cancels it. fan_alarm_notify() dereferences fan_data and its hwmon device. On unbind, devres frees the interrupt, which only waits for the handler itself, and then releases the hwmon device and fan_data, so a pending fan_alarm_notify() can run after those frees. Replace INIT_WORK() with devm_work_autocancel(), registered before devm_request_irq(). The devres cleanup then frees the interrupt first, so no new work can be queued, and cancels the work while fan_data and the hwmon device are still alive. This issue was found by an in-house static analysis tool. Fixes: d6fe1360f42e ("hwmon: add generic GPIO fan driver") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260819033317.446191-1-fanwu01@zju.edu.cn Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 2ab9dcc2a7fccc0f28fc66a8796c74d3237be39f Author: Matti Vaittinen Date: Wed Sep 16 22:18:43 2026 -0400 devm-helpers: Add resource managed version of work init [ Upstream commit 7a2c4cc537fa9f05fe90812e7d789b9faf7eb869 ] A few drivers which need a work-queue must cancel work at driver detach. Some of those implement remove() solely for this purpose. Help drivers to avoid unnecessary remove and error-branch implementation by adding managed verision of work initialization. This will also help drivers to avoid mixing manual and devm based unwinding when other resources are handled by devm. Signed-off-by: Matti Vaittinen Reviewed-by: Krzysztof Kozlowski Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/94ff4175e7f2ff134ed2fa7d6e7641005cc9784b.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede Stable-dep-of: a2471ed17b0e ("hwmon: (gpio-fan) Fix use-after-free in alarm work") Signed-off-by: Sasha Levin commit c242c5f5700241f1e51c473333f06a8b71cb0b4c Author: Sebastian Andrzej Siewior Date: Wed Sep 16 21:13:34 2026 -0400 ring-buffer: Acquire the lock with irqsave in rb_wake_up_waiters() [ Upstream commit 815e07c8fe885a87751c2496a30ae0dcd4118210 ] rb_wake_up_waiters() is a irq_work callback which is initialized with init_irq_work(). As such it will be invoked in thread context on PREEMPT_RT. Invoking the callback in IRQ context on PREEMPT_RT is not an option due its usage of wake_up_all(). Since this callback may run in thread context, it needs to acquire ring_buffer_per_cpu::reader_lock with disabling interrupts and may not assume that they are disabled. Use raw_spinlock_irqsave() to acquire ring_buffer_per_cpu::reader_lock. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260911102152.YEtwkBj9@linutronix.de Fixes: 68282dd930ea3 ("ring-buffer: Fix resetting of shortest_full") Reviewed-by: Vincent Donnefort Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Steven Rostedt [ Replaced scoped_guard() with explicit raw_spin_lock_irqsave()/raw_spin_unlock_irqrestore() calls for GNU89 compatibility. ] Signed-off-by: Sasha Levin commit b7133be1faa35b38f68d78a9f950f1dddf3eb8e5 Author: Xuanqiang Luo Date: Wed Sep 16 20:25:55 2026 -0400 net/sched: act_api: release all action references on NEWACTION failure [ Upstream commit 478eb5abb51931a152abab068f8a717b7ff480fd ] When a batched RTM_NEWACTION request replaces an existing action, tcf_idr_check_alloc() takes a temporary reference on it. If a later action fails to initialize, tcf_action_destroy() uses strict release semantics to clean up the actions initialized so far. For an action bound to a filter, the strict check returns -EPERM without dropping the temporary reference. This error also makes tcf_action_destroy() return before releasing subsequent entries. Any new action initialized between the bound action and the failing entry is leaked together with its reserved IDR slot, preventing reuse of its index. Use tcf_idr_release() to drop each reference held by the batch without rejecting bound actions. This allows cleanup to continue through all initialized entries and preserves the module reference release when an action is destroyed. Explicit action deletion and flushing retain their separate bind-count checks. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Cc: stable@vger.kernel.org Signed-off-by: Xuanqiang Luo Reviewed-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260909070336.32979-2-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3e808d8dfebd8f114a747bd90c8f7d2a6fd7474f Author: Zihan Xi Date: Wed Sep 16 12:21:16 2026 -0400 ipmr: account multicast table and route memory [ Upstream commit b7ee18725f2292ab554aa96a101ae42d45f008bd ] A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables") Cc: stable@vger.kernel.org Reported-by: Vega Signed-off-by: Zihan Xi Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/050b58f7fc6b45da0fb12768ebb62d18fa46133d.1788784801.git.zihanx@nebusec.ai Signed-off-by: Jakub Kicinski [ adapted upstream allocation helpers to existing kzalloc() and kmem_cache_create() calls. ] Signed-off-by: Sasha Levin commit 8fc7d4bd4fa6e726fa422625859433f3b7565eaf Author: Kavan Smith Date: Sat Sep 12 11:08:46 2026 -0400 drm/msm/dsi: round 6G byte clock rate to the PLL-achievable value [ Upstream commit 6cd33b6f4155efc20485929fd0b56bb704641db9 ] MSM8916 runtime DSI commands still go through msm_dsi_host_xfer_prepare(), which re-applies the link clock rate before enabling the link clocks. That is fine in principle, but on DSI 6G the requested byte clock rate often does not exactly match the DSI PHY PLL's realizable rate. For example, the driver can request 56250000 Hz while the PLL actually runs at 56246337 Hz. Because the requested and actual rates differ slightly, every later link_clk_set_rate() call is treated as a real clock change and re-locks the PLL. On a video-mode panel without an internal timing generator, such as samsung,s6d7aa0 / lsl080al03 on MSM8916, that live-clock glitch makes the panel lose pixel lock and visibly corrupts scanout on each runtime DCS command, including backlight writes. Fix this by rounding the computed 6G byte clock rate up front, before it is stored in msm_host->byte_clk_rate and reused by later transfers. Once the host carries the PLL-achievable rate instead of the idealized one, repeated link_clk_set_rate() calls become no-ops in the common clock framework and no longer re-lock the PLL. This keeps the normal transfer callback sequencing intact, preserves the OPP vote path in link_clk_set_rate(), and matches the fix direction suggested in the original 2018 discussion. Reported-by: Daniel Mack Closes: https://lore.kernel.org/all/1a682c5b-7fc9-3aaa-120b-64b239a355a3@zonque.org/ Fixes: 6b16f05aa39f ("drm/msm/dsi: Split clk rate setting and enable") Cc: stable@vger.kernel.org Signed-off-by: Kavan Smith Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/738234/ Link: https://lore.kernel.org/r/20260707013240.681012-1-kavansmith82@gmail.com [DB: dropped extra chunk from the patch] Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin commit 740c34c623179615336260bac34221258b1b7709 Author: Dmitry Baryshkov Date: Sat Sep 12 11:08:45 2026 -0400 drm/msm/dsi: rename dual DSI to bonded DSI [ Upstream commit 6183606da324b934166e7b47c3be6176fa86f9ff ] We are preparing to support two independent DSI hosts in the DSI/DPU code. To remove possible confusion (as both configurations can be referenced as dual DSI) let's rename old "dual DSI" (two DSI hosts driving single device, with clocks being locked) to "bonded DSI". Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20210717124016.316020-2-dmitry.baryshkov@linaro.org Reviewed-by: Bjorn Andersson [DB: add one extra hunk added by one previous patches] Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark [5.10 dependency adaptation: keep the existing PHY/PLL interfaces and rename the stable-only source PLL selection to IS_BONDED_DSI(). Apply the 10nm, 14nm and 7nm PLL comment changes in dsi/pll/, where that code lives in this tree. Omit the test-pattern hunk and newer host declarations, which have no implementation here. No functions or clock behavior are added. The resulting host names let the target byte-clock rounding patch apply without further changes.] [ sashal: Reduced backport -- upstream 6183606da324b touches 8 file(s), this backport carries 8. Not backported here: drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c This note is generated from the file lists only; see the resolution record for the reasoning. ] Stable-dep-of: 6cd33b6f4155 ("drm/msm/dsi: round 6G byte clock rate to the PLL-achievable value") Signed-off-by: Sasha Levin commit 4db723fbbfaf90baf7875655c37c6e81b86a0cc3 Author: Dmitry Baryshkov Date: Sat Sep 12 11:08:44 2026 -0400 drm/msm/dsi: do not enable PHYs when called for the slave DSI interface [ Upstream commit a14440042fe8dac6b7c507a946f46a6f50c9c05d ] Move the call to dsi_mgr_phy_enable after checking whether the DSI interface is slave, so that PHY enablement happens together with the host enablement. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark Stable-dep-of: 6cd33b6f4155 ("drm/msm/dsi: round 6G byte clock rate to the PLL-achievable value") Signed-off-by: Sasha Levin commit b8ac8b14b9d92dd2e1cb05fa8994f41f701fbf28 Author: Wenjie Qi Date: Fri Sep 11 21:49:16 2026 -0400 f2fs: limit recovery filename logging to stored length [ Upstream commit 01027b2fcb74dade59fb833b51023f6593b6a9a2 ] F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. Fixes: f356fe0cba0e ("f2fs: add debug msgs in the recovery routine") Cc: stable@kernel.org Assisted-by: Codex:gpt-5.5 Signed-off-by: Wenjie Qi Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ inlined recover_printable_name() logic into the existing page-based recovery functions. ] Signed-off-by: Sasha Levin commit 92824b85ea1ae6c4316b020bed6147c7e2210479 Author: Wenjie Qi Date: Fri Sep 11 17:15:48 2026 -0400 f2fs: return writeback error from collapse range [ Upstream commit f8a4108800254d6f7b2755515fbbd9d0caac561e ] f2fs_collapse_range() writes back pages moved by f2fs_do_collapse(), but ignores the return value. If writeback fails, the ioctl can still truncate page cache, shrink blocks, and report success. Return the error before truncating page cache or updating the file size. Fixes: b4ace3370324 ("f2fs: support FALLOC_FL_COLLAPSE_RANGE") Cc: stable@kernel.org Assisted-by: Codex:gpt-5.5 Signed-off-by: Wenjie Qi Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim [ adjusted context to retain down_write()/up_write() on i_mmap_sem instead of filemap_invalidate_lock()/filemap_invalidate_unlock(). ] Signed-off-by: Sasha Levin commit 0eca1d7a4dac793224e6e295e29e00245e96cf16 Author: Nilesh Javali Date: Fri Sep 11 14:08:43 2026 -0400 scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot [ Upstream commit 626e44f3d8a924a97a3848a9fd45833947e081e9 ] For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed. Fixes: 8ae6d9c7eb10 ("[SCSI] qla2xxx: Enhancements to support ISPFx00.") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-12-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ replaced qla_req_ring_slot() and qla_req_entry_size() with req->ring_ptr and REQUEST_ENTRY_SIZE. ] Signed-off-by: Sasha Levin commit 730a18768b27582636b5af343069c30809b763a2 Author: Nilesh Javali Date: Fri Sep 11 13:58:18 2026 -0400 scsi: qla2xxx: Quiesce response IRQ before freeing request queue [ Upstream commit 505753ec2594c6af09a601f0dd60be7d840c1d2d ] qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early. Fixes: d74595278f4a ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-18-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ adjusted context due to missing qla_free_buf_pool() call ] Signed-off-by: Sasha Levin commit c1f42eaee0b332f93755ee25b0acb89155c0565e Author: Nilesh Javali Date: Fri Sep 11 14:03:22 2026 -0400 scsi: qla2xxx: Fix 64G link speed reporting in get_data_rate [ Upstream commit 52fba32317ee631faa878725b2f7cd5c08acacd3 ] qla2x00_get_data_rate() skips updating ha->link_data_rate when the firmware returns mcp->mb[1] == 0x7. That value was a legacy sentinel from before 64G hardware existed, but PORT_SPEED_64GB is now defined as 0x07 and ha->link_data_rate is decoded with the PORT_SPEED_* encoding. On a 64G-capable adapter a genuine 64G link is therefore dropped, and the port speed is misreported (port_speed sysfs, fc_host speed, FDMI). Only 28xx and 29xx support 64G, so accept 0x07 on those adapters while keeping the legacy filter for older ones. Also drop the duplicate copy of the check at the end of the success branch; it repeated the first assignment with no intervening change. Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX") Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260723050413.3897522-46-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ Omitted IS_QLA29XX() checks because this branch lacks 29xx adapter support. ] Signed-off-by: Sasha Levin commit e6732abc33c41772192ef8717354a5574a5c2ebf Author: Nilesh Javali Date: Fri Sep 11 17:15:35 2026 -0400 scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path [ Upstream commit 6d90f0feb929f6c0f3010f9af4747c7230b75993 ] When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to probe_hw_failed and calls qla2x00_mem_free(). Several error labels in qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool, flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info) but left the pointers dangling. qla2x00_mem_free() then freed them a second time. Worse, for the dma_pool members it issued dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool. Clear each freed pointer (and its DMA handle) in the error labels so the subsequent qla2x00_mem_free() skips them. Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-13-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ omitted the upstream cleanup block for allocation paths absent from Linux 5.10. ] Signed-off-by: Sasha Levin commit 29792762e65d4eefbe75b6048c59763fd844191a Author: Ruoyu Wang Date: Fri Sep 11 08:46:55 2026 -0400 media: zoran: Avoid freeing a registered video_device twice [ Upstream commit 0735e0b5a96761a9ce277a238e834008ad92a0a5 ] zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review. Fixes: 82e3a496eb56 ("media: staging: media: zoran: move videodev alloc") Cc: stable@vger.kernel.org Signed-off-by: Ruoyu Wang Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit ac9d7ca8199c64c320ba8177e3c0f7b0deb7ff06 Author: Guangshuo Li Date: Fri Sep 11 08:19:34 2026 -0400 media: saa7164: fix cleanup on resource allocation failure [ Upstream commit 28e84c6e2e6753ed238ea097b2842a32a6a6879b ] saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. Fixes: 443c1228d505 ("V4L/DVB (12923): SAA7164: Add support for the NXP SAA7164 silicon") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Hans Verkuil [ Inlined err_devlist cleanup with explicit mutex locking because the shared MMIO cleanup path is absent. ] Signed-off-by: Sasha Levin commit 36d62dfb3cac66e6a97fd850a592c2ed56e35ba5 Author: Christian Borntraeger Date: Fri Sep 11 06:57:43 2026 -0400 KVM: s390: Fix length check __import_wp_info() [ Upstream commit 4c07680a467e2f7697245bcd11691bffb2a6f0ed ] struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user space. This is then assigned to wp_info->len, which is an int. The bounds check is done on the truncated value while the allocation uses the untruncated one: wp_info->len = bp_data->len; [...] if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) return -EINVAL; wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT); Use the validated value for the allocation as intended. Without this fix userspace can trigger >4GB allocations which will fail and result in a WARN due to MAX_PAGE_ORDER. Fixes: 27291e2165b6 ("KVM: s390: hardware support for guest debugging") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger Reviewed-by: Claudio Imbrenda Signed-off-by: Claudio Imbrenda Message-ID: <20260805110455.7200-9-borntraeger@linux.ibm.com> [ Retained GFP_KERNEL instead of upstream GFP_KERNEL_ACCOUNT in the kmalloc() call. ] Signed-off-by: Sasha Levin commit b577a7cd6d984dd430af88ee1c9e03da71b73ee0 Author: Yosry Ahmed Date: Fri Sep 11 06:41:51 2026 -0400 KVM: nVMX: Service local TLB flushes on failed nested VM-Enter [ Upstream commit 05a0b701d1089fb57beeb8982f23c3bbafe0fa8b ] KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architecturally require a TLB flush, the TLBs are updated so that, after VM entry, the logical processor will not use any translations that were cached before the transition. The SDM is unclear about when the TLB flush should occur, and whether or not a failed VM entry would flush the TLB, so it is safer to always do the TLB flush in this case. More concretely, KVM also updates the last VPID L1 used for L2 in nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry ultimately fails. With the current code, KVM could miss a TLB flush if L1 changes L2's VPID, then does a failed VM entry followed by a successful one, as the failed VM entry would update last_vpid but not actually flush the TLB. Servicing local TLB flushes on failed VM entries makes sure that the TLB is always flushed when last_vpid is updated. Fixes: 5c614b3583e7 ("KVM: nVMX: nested VPID emulation") Cc: stable@vger.kernel.org Reported-by: Sashiko # Internal review Suggested-by: Sean Christopherson Signed-off-by: Yosry Ahmed Link: https://patch.msgid.link/20260722230128.1587363-1-yosry@kernel.org Signed-off-by: Sean Christopherson [ replaced unavailable kvm_service_local_tlb_flush_requests() with inline 5.10 TLB flush request handling. ] Signed-off-by: Sasha Levin commit 00fee94390e90c2e4db0a502bd1e2ea7f0b795b9 Author: Runyu Xiao Date: Thu Sep 10 15:08:33 2026 -0400 ALSA: harmony: initialize locks before requesting IRQ [ Upstream commit 33abb7491e89285a41565670945293dda841afc4 ] snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Assisted-by: Codex:GPT-5 Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260830063411.2215691-1-runyu.xiao@seu.edu.cn Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 7782a7db9195a2d5349dce3aa920a11fda2d50a6 Author: Takashi Iwai Date: Thu Sep 10 15:08:32 2026 -0400 ALSA: parisc: Fix assignment in if condition [ Upstream commit 6ea9a2b84cc354ffd028195edb4e3d60d47f7bcb ] PARISC harmony driver code contains an assignment in if condition, which is a bad coding style that may confuse readers and occasionally lead to bugs. This patch is merely for coding-style fixes, no functional changes. Link: https://lore.kernel.org/r/20210608140540.17885-67-tiwai@suse.de Signed-off-by: Takashi Iwai Stable-dep-of: 33abb7491e89 ("ALSA: harmony: initialize locks before requesting IRQ") Signed-off-by: Sasha Levin commit b8f06b73ad146d84a33c124563c93eeef4f5b674 Author: Karl Mehltretter Date: Thu Sep 10 20:15:38 2026 -0400 arm64: mm: Fix the lockless page-table walk in show_pte() [ Upstream commit a77644d009dece1104b6fcc6e322b0e4503db0d6 ] show_pte() walks page tables locklessly and can run with interrupts enabled. A concurrent teardown can free a table page while it is being walked. It can also clear a parent entry after show_pte() checked it; the regular pXd_offset() helpers then reread the cleared entry and can derive a bogus lower-level pointer and fault again. Use the lockless offset helpers with the saved parent entries, as gup_fast() does, and pass the saved PMD to pte_offset_map(). For task page tables, arm64 selects MMU_GATHER_RCU_TABLE_FREE. Disable local interrupts around the walk to hold off RCU-deferred table frees and block the tlb_remove_table_sync_one() IPI until the walk is finished. Place the IRQ guard after the header print. This does not make the output a consistent snapshot, but prevents the task page-table walk from dereferencing a released table page or deriving a pointer from a different parent value. Fixes: 1d18c47c735e ("arm64: MMU fault handling and page table management") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Karl Mehltretter Signed-off-by: Will Deacon [ replaced guard(irqsave)() with explicit local_irq_save()/local_irq_restore() to avoid declaration-after-statement warnings. ] Signed-off-by: Sasha Levin commit e33a12175d5560725dffe86ae1cf95eb375311e4 Author: Steven Rostedt Date: Thu Sep 10 10:39:35 2026 -0400 ftrace: Synchronize the initialization of ftrace_ops [ Upstream commit 4617721c502b2ddaa4e324e86da4997edf738fa5 ] There's some internal state that ftrace_ops needs to have set, but since it can be declared outside of the ftrace.c code, it calls ftrace_ops_init() on the ops in every global function. The issue is that if two tasks call it on the same ops at the same time it is possible to have the initialization of one corrupt the initialization of the other call. Create a ops_mutex to use to synchronize every initialization of the ftrace_ops. The mutex is taken within checking the ftrace_ops flag that states it was initializied but the flag is checked again after the mutex has been taken. Checking first outside the mutex allows it to shortcut having to take the mutex. But then the check needs to be done again after the mute is taken in case of races. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260902095501.6b59af20@gandalf.local.home Fixes: f04f24fb7e48d ("ftrace, kprobes: Fix a deadlock on ftrace_regex_lock") Reported-by: sashiko-bot@kernel.org Close: https://lore.kernel.org/all/20260829025528.49A831F000E9@smtp.kernel.org/ Signed-off-by: Steven Rostedt [ adjusted INIT_OPS_HASH macro context for the missing subop_list member. ] Signed-off-by: Sasha Levin commit f15a2c0c5f59f90529729570a06479c3cbf2636e Author: Muhammad Bilal Date: Thu Sep 10 08:53:02 2026 -0400 staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit() [ Upstream commit cc7cd2a9228175c975f62ad56ed7c767701cb4fa ] sm750_hw_imageblit() advances its monochrome source pointer by src_delta per scanline, and computes the correct rounded-up stride internally as: bytes_per_scan = (width + start_bit + 7) / 8; Its only caller, lynxfb_ops_imageblit(), instead passed src_delta as image->width >> 3. For widths not a multiple of 8 this under-counted the stride, so the source pointer fell further behind the real per-scanline layout on every line, corrupting the rendered image. Rather than just fixing the caller's calculation, remove src_delta as a parameter entirely and have sm750_hw_imageblit() advance by the bytes_per_scan it already computes for itself. There has only ever been one caller, and that caller was passing an out-of-sync derivative of the same width/start_bit values sm750_hw_imageblit() already has, so keeping stride as a separate parameter served no purpose beyond letting the two calculations drift apart, which is exactly what happened here. Rounding up, rather than down, is the direction consistent with the rest of the fbdev core: struct fb_image mono bitmap data (the same image->data this driver receives) is walked elsewhere with byte strides derived from a ceiling division of width by 8. The generic mono bit iterator in drivers/video/fbdev/core/fb_imageblit.h advances scanlines with "iter->data += BITS_TO_BYTES(iter->width)", and BITS_TO_BYTES() (include/linux/bitops.h) is a ceiling division. sm750_hw_imageblit()'s own "(width + start_bit + 7) / 8" is that same ceiling division with an added start_bit offset, so the caller's ">> 3" (floor) was the one calculation out of step with how this data layout is handled everywhere else. Found by code review of sm750_hw_imageblit()'s internal stride calculation against what its only caller was passing in, and confirmed with a clean -Werror build. I do not have this hardware, so this has not been exercised at runtime on real sm750 silicon. Fixes: 81dee67e215b2 ("staging: sm750fb: add sm750 to staging") Cc: stable@vger.kernel.org Reviewed-by: Dan Carpenter Signed-off-by: Muhammad Bilal Link: https://patch.msgid.link/20260901113031.161610-1-meatuni001@gmail.com Signed-off-by: Greg Kroah-Hartman [ adapted the patch to older sm750fb identifiers and unnamed de_imageblit parameters. ] Signed-off-by: Sasha Levin commit 486bd45a9e2b29ffabdb3d218474e3a7ddc973a9 Author: Lee Jones Date: Thu Sep 10 08:53:01 2026 -0400 staging: sm750fb: sm750_accel: Provide description for 'accel' and fix function naming [ Upstream commit d12dd1e0e3b96b1a2c9ffdb0fa9c115aeb82b569 ] Fixes the following W=1 kernel build warning(s): drivers/staging/sm750fb/sm750_accel.c:155: warning: Function parameter or member 'accel' not described in 'sm750_hw_copyarea' drivers/staging/sm750fb/sm750_accel.c:155: warning: expecting prototype for sm750_hm_copyarea(). Prototype was for sm750_hw_copyarea() instead drivers/staging/sm750fb/sm750_accel.c:321: warning: Function parameter or member 'accel' not described in 'sm750_hw_imageblit' Cc: Sudip Mukherjee Cc: Teddy Wang Cc: Greg Kroah-Hartman Cc: linux-fbdev@vger.kernel.org Cc: linux-staging@lists.linux.dev Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210414181129.1628598-26-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: cc7cd2a92281 ("staging: sm750fb: fix mono image source stride mismatch in lynxfb_ops_imageblit()") Signed-off-by: Sasha Levin commit 2d14b12eade0d38b6a2ac934620df971fe58b8e3 Author: Can Peng Date: Thu Sep 10 09:01:59 2026 -0400 spi: bcm63xx: disable clock on resume failure [ Upstream commit 2b62c2c134fa32d9d3a9e7323c8ac74518eeb4ac ] bcm63xx_spi_resume() enables the controller clock before restarting the SPI controller queue. If spi_controller_resume() fails, the function currently reports success and leaves the clock enabled. Propagate the error and disable the clock before returning. Fixes: b42dfed83d95 ("spi: add Broadcom BCM63xx SPI controller driver") Cc: stable@vger.kernel.org Signed-off-by: Can Peng Link: https://patch.msgid.link/20260804071831.860784-1-pengcan@kylinos.cn Signed-off-by: Mark Brown [ changed spi_controller_resume(host) to spi_master_resume(master) to match the older API and variable name. ] Signed-off-by: Sasha Levin commit 38edd187a37db0d8e4bf84cc954dbdbe7bfa366f Author: Jeffin Philip Date: Wed Sep 9 22:29:34 2026 -0400 usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() [ Upstream commit 2c0f5ca48674a5b5f9fa4a9c3325aa48053af0bc ] Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic. Reported-by: syzbot+791be35f1fbcc85d06d7@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=791be35f1fbcc85d06d7 Fixes: fe5a6c48fd95 ("usb: gadget: storage: get rid of fsg_num_buffers_validate()") Cc: stable Signed-off-by: Jeffin Philip Acked-by: Alan Stern Link: https://patch.msgid.link/20260818035904.10324-1-jeffinphilip14@gmail.com Signed-off-by: Greg Kroah-Hartman [ adjusted context to retain the branch’s existing kcalloc() call instead of kzalloc_objs(). ] Signed-off-by: Sasha Levin commit a9b9cae0bd887ef0d438887f20b0a417491e45f0 Author: Adrian Hunter Date: Wed Sep 9 21:29:26 2026 -0400 i3c: master: Fix use-after-free of master->this [ Upstream commit feb0ed76601f3c2f91f08688c5a7d8b9d382f720 ] sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Link: https://patch.msgid.link/20260807145638.168865-5-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni [ retained of_node_put(dev->of_node) instead of upstream’s fwnode_handle_put(dev->fwnode). ] Signed-off-by: Sasha Levin commit 3728d90ec66d4ad33d357e7d6e82b02d34e1c99c Author: Adrian Hunter Date: Wed Sep 9 21:26:05 2026 -0400 i3c: master: Do not treat master device as a duplicate target [ Upstream commit 4dc1b3eeba7991905a5b5b8129ebea51be7d87b7 ] i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices. Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Frank Li Acked-by: Mukesh Savaliya Link: https://patch.msgid.link/20260807145638.168865-4-adrian.hunter@intel.com Signed-off-by: Alexandre Belloni [ adjusted the duplicate-device comparison to match the older branch’s PID handling without nonzero-PID checks. ] Signed-off-by: Sasha Levin commit 20a0f80f67a1495a57e5a3ba0fa172a0f919691d Author: Runyu Xiao Date: Wed Sep 9 16:42:22 2026 -0400 ALSA: pcxhr: initialize mutexes before requesting threaded IRQ [ Upstream commit 6c97817e20598e5473094e0e38d1f51f1cf4dfff ] pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe. Fixes: 9bef72bdb26e ("ALSA: pcxhr: Use nonatomic PCM ops") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260818144717.2269918-1-runyu.xiao@seu.edu.cn Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 4800ddf1030586f0d66cabc6a22337c1a35f0b38 Author: Jason Wang Date: Wed Sep 9 16:42:21 2026 -0400 ALSA: pcxhr: use __func__ to get funcion's name in an output message [ Upstream commit fac24b0f34c179c6ca863f5205fad42a676caf9a ] Prefer using '"%s...", __func__' to get current function's name in an output message. Signed-off-by: Jason Wang Link: https://lore.kernel.org/r/20210731052647.141046-1-wangborong@cdjrlc.com Signed-off-by: Takashi Iwai Stable-dep-of: 6c97817e2059 ("ALSA: pcxhr: initialize mutexes before requesting threaded IRQ") Signed-off-by: Sasha Levin commit e92848c4e1af5f9fb1c09c3ac0f3081bbb5a787a Author: Can Peng Date: Wed Sep 9 16:06:51 2026 -0400 hwrng: stm32 - Fix runtime PM cleanup on registration failure [ Upstream commit 1163a476a568f6c0f852d469c8e4c5a5f805adac ] stm32_rng_probe() enables autosuspend and runtime PM before registering the hwrng. If devm_hwrng_register() fails, probe returns with runtime PM left enabled and autosuspend still selected. The remove callback also only disables runtime PM and does not undo pm_runtime_use_autosuspend(). Use devm_pm_runtime_enable() so runtime PM is unwound automatically on probe failure and driver detach. Since the managed cleanup also disables runtime PM,drop the remove callback. Fixes: c6a97c42e399 ("hwrng: stm32 - add support for STM32 HW RNG") Cc: stable@vger.kernel.org Signed-off-by: Can Peng Reviewed-by: Linus Walleij Signed-off-by: Herbert Xu [ adapted to the older driver’s relocated int-returning remove callback and existing err variable. ] Signed-off-by: Sasha Levin commit 8cb289eb764ff18000a33ddbc287d676d8597eea Author: Hidayath Khan Date: Wed Sep 9 13:33:07 2026 -0400 net/smc: fix socket refcount leak in smc_switch_conns() [ Upstream commit 719296c4aa8213d4ac8002e77d5956d436bc98d0 ] smc_switch_conns() takes a reference on the SMC socket before dropping lgr->conns_lock, so the connection stays alive while the CDC slot is fetched: sock_hold(&smc->sk); read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); if (rc) goto err_out; The err_out label only drops the wr_tx link reference, so this early exit returns without the matching sock_put(). The second error exit is not affected, because sock_put() has already run by then. A leaked sk_refcnt means the smc_sock is never destroyed. Its send and receive buffers stay allocated, and for a user socket the reference held on the network namespace is never released, so the netns can no longer be torn down. smc_cdc_get_free_slot() fails when the target link goes down or when the connection has been killed while the switch is in progress. Both are reachable during the link failover this function implements, so the leak is triggered by the same hardware events that make smc_switch_conns() run in the first place. Restructure so there is a single sock_put() covering both outcomes, instead of adding a second one to the error path. Fixes: 95f7f3e7dc6b ("net/smc: improved fix wait on already cleared link") Cc: stable@vger.kernel.org Reviewed-by: Mahanta Jambigi Reviewed-by: Breno Leitao Signed-off-by: Hidayath Khan Link: https://patch.msgid.link/20260820144729.1019399-1-hidayath@linux.ibm.com Signed-off-by: Jakub Kicinski [ Replaced smc_switch_link_and_count() with the existing conn->lnk = to_lnk assignment. ] Signed-off-by: Sasha Levin commit b389325e1ad3bfd113aac6a1fcf1658fec2aebb1 Author: Fan Wu Date: Wed Sep 9 13:03:50 2026 -0400 power: supply: ucs1002: fix use-after-free on remove [ Upstream commit 609af0ceeaefdfa42cd01dd060b20f2e41f9a232 ] ucs1002 has no remove callback, so unbind runs entirely through devm. The alert IRQ handler queues the health_poll delayed work, and the work reschedules itself while the chip reports a bad-health condition. devm frees the alert IRQ, which only synchronizes the handler; it does not cancel the delayed work, which can then run after devm frees the driver data and dereference it. Register health_poll with devm_delayed_work_autocancel() before the alert IRQ is requested. devm then frees the IRQ before cancelling the work, so the handler can no longer queue it and the work is cancelled before the driver data is freed. This issue was found by an in-house static analysis tool. Fixes: 81196e2e57fc ("power: supply: ucs1002: fix some health status issues") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Reviewed-by: Lucas Stach Link: https://patch.msgid.link/20260802051249.424015-1-fanwu01@zju.edu.cn Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit 9aace29bbcfa64450c53773ed2f20e95987b3690 Author: Fan Wu Date: Wed Sep 9 12:57:54 2026 -0400 power: supply: bq24257: fix use-after-free on remove [ Upstream commit 9d34c9d660c3d0931d2cc749c46c47cf31f96e48 ] The STAT-pin interrupt is devm-managed, so it stays armed until the devm cleanup that runs after remove() returns. remove() cancels bq->iilimit_setup_work while the threaded handler can still fire; that handler reschedules the work and dereferences bq, so the work runs against freed memory once devm frees bq. Make the delayed work device-managed with devm_delayed_work_autocancel(), registered before the interrupt request. The devm cleanup then releases the interrupt first, so the handler can no longer reschedule the work, and cancels the work before bq is freed. The explicit cancel_delayed_work_sync() in remove() is no longer needed and is dropped. Found by static analysis. Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260731143554.334179-1-fanwu01@zju.edu.cn Link: https://patch.msgid.link/20260801051958.354528-1-fanwu01@zju.edu.cn Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit f9ae0b1a04be95c33745c401a76e771c0018c3f8 Author: Matti Vaittinen Date: Wed Sep 9 12:57:53 2026 -0400 workqueue: Add resource managed version of delayed work init [ Upstream commit 0341ce5443949588e93581b49b934cdde2befbf8 ] A few drivers which need a delayed work-queue must cancel work at driver detach. Some of those implement remove() solely for this purpose. Help drivers to avoid unnecessary remove and error-branch implementation by adding managed verision of delayed work initialization. This will also help drivers to avoid mixing manual and devm based unwinding when other resources are handled by devm. Reviewed-by: Hans de Goede Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/51769ea4668198deb798fe47fcfb5f5288d61586.1616506559.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 9d34c9d660c3 ("power: supply: bq24257: fix use-after-free on remove") Signed-off-by: Sasha Levin commit 28e8e9e1f3bdb75b611ea14c39775455528c4012 Author: Fan Wu Date: Wed Sep 9 10:34:16 2026 -0400 mmc: via-sdmmc: cancel card-detect work on remove [ Upstream commit 57e5d877f898d5e5c9d672a77bb6bdd24f0d9bf5 ] Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the interrupt through via_reset_pcictrl(); mask it again afterwards. This issue was found by an in-house static analysis tool and confirmed by manual code review. Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Signed-off-by: Ulf Hansson [ adjusted context to retain del_timer_sync() instead of timer_delete_sync(). ] Signed-off-by: Sasha Levin commit d324946b10fad0d2a14fccefc64b24bf7429d0cd Author: Jianing Li Date: Wed Sep 9 07:28:24 2026 -0400 power: supply: max17040: drop incorrect I2C functionality check [ Upstream commit 4e4b9f5ce9dfb8ed4b8d1262a504b8043ac09d87 ] max17040_probe() rejects adapters that do not advertise I2C_FUNC_SMBUS_BYTE. The driver does not issue SMBus byte transactions, however. Its regmap has 8-bit registers and 16-bit big-endian values, for which regmap-i2c supports either raw I2C transfers or SMBus word-data transactions. Consequently, an adapter providing raw I2C transfers or SMBus word data but not SMBus byte transactions is rejected even though regmap can access the device. Conversely, the current check can pass an adapter that regmap cannot use. Drop the stale check and let devm_regmap_init_i2c() validate and select the supported transfer method. Fixes: 6455a8a84bdfd ("power: supply: max17040: Use regmap i2c") Cc: stable@vger.kernel.org Signed-off-by: Jianing Li Link: https://patch.msgid.link/20260731084259.916-1-m13940358460@163.com [Fixed Fixes tag, so that it points to the regmap introduction instead of the initial driver addition] Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin commit eee726b5d622a38676007cf961f85e63d4bda475 Author: Uwe Kleine-König Date: Wed Sep 9 07:28:23 2026 -0400 power: supply: max17040: Convert to i2c's .probe_new() [ Upstream commit a07fca69378c26ea034826feb0011256e25ad237 ] .probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König Signed-off-by: Sebastian Reichel Stable-dep-of: 4e4b9f5ce9df ("power: supply: max17040: drop incorrect I2C functionality check") Signed-off-by: Sasha Levin commit 4e590a68278f9f2bb6e9b407cf3ba27fb0781878 Author: Angel Iglesias Date: Wed Sep 9 07:28:22 2026 -0400 i2c: core: Introduce i2c_client_get_device_id helper function [ Upstream commit 662233731d66cf41e7494e532e702849c8ce18f3 ] Introduces new helper function to aid in .probe_new() refactors. In order to use existing i2c_get_device_id() on the probe callback, the device match table needs to be accessible in that function, which would require bigger refactors in some drivers using the deprecated .probe callback. This issue was discussed in more detail in the IIO mailing list. Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/ Suggested-by: Nuno Sá Suggested-by: Andy Shevchenko Suggested-by: Jonathan Cameron Signed-off-by: Angel Iglesias Reviewed-by: Andy Shevchenko Reviewed-by: Jonathan Cameron Signed-off-by: Wolfram Sang Stable-dep-of: 4e4b9f5ce9df ("power: supply: max17040: drop incorrect I2C functionality check") Signed-off-by: Sasha Levin commit 3def4721431f3e374e1e3124f4d32bb07ae8df1c Author: Fan Wu Date: Wed Sep 9 07:31:20 2026 -0400 power: supply: rt9455: quiesce delayed work before teardown [ Upstream commit 3e7a1ebc32fad5a558254a478efd401c17a24381 ] The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work batt_presence_work queues max_charging_time_work cancel batt_presence_work return devres frees rt9455_info max_charging_time_work dereferences rt9455_info The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pending callback can then access rt9455_info after it has been freed. Register rt9455_cancel_all_delayed_works() through devm_add_action_or_reset() right after devm_power_supply_register(). devres invokes the action in reverse registration order, after the managed IRQ has been freed and before rt9455_info is released, so the delayed works are drained in both rt9455_remove() and the probe error path. Cancel pwr_rdy_work and batt_presence_work before max_charging_time_work because both can queue the latter. This issue was found by an in-house static analysis tool. Fixes: e86d69dd786e ("power_supply: Add support for Richtek RT9455 battery charger") Cc: stable@vger.kernel.org Assisted-by: Codex:gpt-5.6 Signed-off-by: Fan Wu Link: https://patch.msgid.link/20260723225310.12663-1-fanwu01@zju.edu.cn Signed-off-by: Sebastian Reichel [ retained the int-returning rt9455_remove() callback required by the older I²C interface. ] Signed-off-by: Sasha Levin commit 36e06f0238665202127dde1dc3405661d9171864 Author: Uwe Kleine-König Date: Wed Sep 9 07:31:19 2026 -0400 power: supply: rt9455: Convert to i2c's .probe_new() [ Upstream commit 2adfc4370ebb745380a44c3e5418486a32a9ba67 ] The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König Signed-off-by: Sebastian Reichel Stable-dep-of: 3e7a1ebc32fa ("power: supply: rt9455: quiesce delayed work before teardown") Signed-off-by: Sasha Levin commit e7124d223c5a2dfb4c1a7b2eea24375edc355a10 Author: Oscar Ou Date: Wed Sep 9 07:03:58 2026 -0400 lockd: fix swapped arguments in nlmsvc_match_ip() [ Upstream commit b9060689f49dc663e9a3d069c4a65ff63a836e66 ] When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip, nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server sockaddr as the opaque @data argument: nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL); The match callback is later invoked from nlm_traverse_locks() as: match(lockhost, host); where the first argument is the nlm_host that owns the lock, and the second argument is the @data that was originally passed down (here the server sockaddr). This is the convention every other match callback relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()): arg1 is the real nlm_host, arg2 is the caller-supplied reference value. nlmsvc_match_ip() has had these two arguments reversed ever since the unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip"): return rpc_cmp_addr(nlm_srcaddr(host), datap); Here @host is actually the server sockaddr, so nlm_srcaddr(host) dereferences a struct sockaddr as a struct nlm_host and reads garbage at the offset of h_srcaddr; meanwhile @datap is actually the lock owner's nlm_host but is compared as a sockaddr. As a result the comparison practically never matches and locks are not released for the requested IP. Swap the arguments so the lock owner's source address is compared against the requested server address: return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host); Fixes: 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip") Cc: stable@vger.kernel.org Signed-off-by: Oscar Ou [ cel: fix the misleading typedef parameter names too ] Link: https://patch.msgid.link/20260617075738.1151797-1-oscarou@synology.com Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin commit 82fed8d7bdf63d5ce79a544becd12e864152c076 Author: Ruoyu Wang Date: Wed Sep 9 07:03:53 2026 -0400 i2c: mxs: fix DMA channel leak on probe error [ Upstream commit 777979e627115734052b323d2721cdb500e81dcf ] mxs_i2c_probe() requests an exclusive DMA channel before resetting the controller and registering the I2C adapter. If either later operation fails, probe returns without releasing the channel because the remove callback is not invoked after a failed probe. Use devm_dma_request_chan() so the device core releases the channel on probe failure and driver detach. Remove the manual release from the remove callback because the channel is now device-managed. This issue was found by a static analysis checker and confirmed by manual source review. Fixes: 62885f59a261 ("MXS: Implement DMA support into mxs-i2c") Assisted-by: unnamed:claude-opus-4.8 typestate Signed-off-by: Ruoyu Wang Cc: # v3.7+ Reviewed-by: Frank Li Signed-off-by: Andi Shyti Link: https://patch.msgid.link/20260815151720.3757460-1-ruoyuw560@gmail.com Signed-off-by: Sasha Levin commit 1b30113781c918c4706b3afc621235eb7e6bd0a9 Author: Bence Csókás Date: Wed Sep 9 07:03:52 2026 -0400 dmaengine: Add devm_dma_request_chan() [ Upstream commit 08bf1663c21a3e815eda28fa242d84c945ca3b94 ] Expand the arsenal of devm functions for DMA devices, this time for requesting channels. Signed-off-by: Bence Csókás Link: https://lore.kernel.org/r/20250610082256.400492-2-csokas.bence@prolan.hu Signed-off-by: Vinod Koul Stable-dep-of: 777979e62711 ("i2c: mxs: fix DMA channel leak on probe error") Signed-off-by: Sasha Levin commit 72835d539ed3eb4c4b85b85a3f3976c7bdc70b91 Author: Jiacheng Yu Date: Tue Sep 8 14:28:45 2026 -0400 params: fix charp corruption on allocation failure [ Upstream commit 3dfaae04243cde460d82dfc2a7dd0bb6664d20ae ] param_set_charp() stores charp parameters in allocated memory after slab is available, and releases the previous value when the parameter is updated. The previous value is released before the replacement allocation succeeds. If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter left as NULL. Failing zswap's compressor update before zswap is initialized can later trigger: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0x10/0x30 Call Trace: zswap_setup+0x3b1/0x490 zswap_enabled_param_set+0x5b/0xa0 param_attr_store+0x93/0xe0 module_attr_store+0x1c/0x30 kernfs_fop_write_iter+0x116/0x1f0 Allocate and copy the replacement first, then replace the parameter value only after allocation succeeds. Fixes: e180a6b7759a ("param: fix charp parameters set via sysfs") Cc: stable@vger.kernel.org Signed-off-by: Jiacheng Yu Reviewed-by: Petr Pavlu Signed-off-by: Petr Pavlu Signed-off-by: Sasha Levin commit 1a61cef16531e23c7a656492839bfadb72a8ff46 Author: Andy Shevchenko Date: Tue Sep 8 14:28:44 2026 -0400 params: Fix multi-line comment style [ Upstream commit b5e3f86a47d34f7b8af899f8cc70520f6daf8b53 ] The multi-line comment style in the file is rather arbitrary. Make it follow the standard one. Reviewed-by: Luis Chamberlain Reviewed-by: Kees Cook Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120151419.1661807-6-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook Stable-dep-of: 3dfaae04243c ("params: fix charp corruption on allocation failure") Signed-off-by: Sasha Levin commit 1bb2fdda5f74f62d96dd7f136a0971106bbcef5f Author: Andy Shevchenko Date: Tue Sep 8 14:28:43 2026 -0400 params: Sort headers [ Upstream commit a05f096c2c0ca52e8fd34740c7d4b53ab3e7123e ] Sort the headers in alphabetic order in order to ease the maintenance for this part. Reviewed-by: Luis Chamberlain Reviewed-by: Kees Cook Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120151419.1661807-5-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook Stable-dep-of: 3dfaae04243c ("params: fix charp corruption on allocation failure") Signed-off-by: Sasha Levin commit 88ff8119751663786f167d174ede509425296ed7 Author: Andy Shevchenko Date: Tue Sep 8 14:28:42 2026 -0400 params: Use size_add() for kmalloc() [ Upstream commit 0fc79cbc937f2a754a302a710a94b68c61d0a89a ] Prevent allocations from integer overflow by using size_add(). Reviewed-by: Luis Chamberlain Reviewed-by: Kees Cook Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120151419.1661807-4-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook Stable-dep-of: 3dfaae04243c ("params: fix charp corruption on allocation failure") Signed-off-by: Sasha Levin commit 22d67a6d5b059e32234f6588789f6425f86b02b6 Author: Andy Shevchenko Date: Tue Sep 8 14:28:41 2026 -0400 params: Do not go over the limit when getting the string length [ Upstream commit fd0cd057a1b7351604daa6ffc91dfe28adf7225d ] We can use strnlen() even on early stages and it prevents from going over the string boundaries in case it's already too long. Reviewed-by: Luis Chamberlain Reviewed-by: Kees Cook Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120151419.1661807-3-andriy.shevchenko@linux.intel.com Signed-off-by: Kees Cook Stable-dep-of: 3dfaae04243c ("params: fix charp corruption on allocation failure") Signed-off-by: Sasha Levin commit 85252288b5e1f24304037fc2a93b1717bdc8a3d4 Author: Christophe JAILLET Date: Tue Sep 8 14:28:40 2026 -0400 kernel/params.c: Use kstrtobool() instead of strtobool() [ Upstream commit def7b92efd868a6c78da86770704c1a03506016e ] strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file () Signed-off-by: Christophe JAILLET Reviewed-by: Miroslav Benes Signed-off-by: Luis Chamberlain Stable-dep-of: 3dfaae04243c ("params: fix charp corruption on allocation failure") Signed-off-by: Sasha Levin commit 1bc285868fe395f8a6b7ae1afa8fc75586f4e272 Author: Kuan-Wei Chiu Date: Tue Sep 8 09:11:59 2026 -0400 coresight: etm3x: Fix cntr_val_show() to match cntr_val_store() behavior [ Upstream commit 41fb4e925528aefa4b7a5f76c7f81db99c0d0f38 ] The cntr_val_show() function was intended to print the values of all counters using a loop. However, due to a buffer overwrite issue with sprintf(), it effectively only displayed the value of the last counter. The companion function, cntr_val_store(), allows users to modify a specific counter selected by 'cntr_idx'. To maintain consistency between read and write operations and to align with the ETM4x driver behavior, modify cntr_val_show() to report only the value of the currently selected counter. This change removes the loop and the "counter %d:" prefix, printing only the hexadecimal value. It also adopts sysfs_emit() for standard sysfs output formatting. Fixes: a939fc5a71ad ("coresight-etm: add CoreSight ETM/PTM driver") Cc: stable@vger.kernel.org Signed-off-by: Kuan-Wei Chiu Reviewed-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20251202082613.3265761-1-visitorckw@gmail.com Signed-off-by: Sasha Levin commit 2c6eede83b3de1268db92c7e49741761c954aa26 Author: Frank Sorenson Date: Sun Sep 6 21:03:19 2026 -0400 cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0 [ Upstream commit 6c322f5cf7476ded7a9a20f7be72462065a03c68 ] With len == 0 (clone to EOF), the effective length is computed as: len = src_inode->i_size - off; If off > i_size, this is a negative loff_t, corrupting the ByteCount in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range in filemap_write_and_wait_range(). The existing off >= i_size check fires only after the ioctl has already been sent. Snapshot i_size_read() once for both the bounds check and the length calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject off > src_size with -EINVAL. Treat off == src_size as a no-op, consistent with __generic_remap_file_range_prep(). Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara [ added the missing unlock label at the existing common unlock path ] Signed-off-by: Sasha Levin commit d00a2f81ba7c57045bd644971ddb6961c5efe3e0 Author: Chuck Lever Date: Sat Sep 5 22:13:38 2026 -0400 nfsd: gate nfs2 setacl by argp->mask [ Upstream commit a3a7e20ed66d3f04d37883c398da8a113b430769 ] The NFSACL v2 SETACL path shares the decoder convention used by its v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access only when NFS_ACL is set in the request mask and argp->acl_default only when NFS_DFACL is set, leaving the other pointer NULL because the argument buffer is zeroed up to pc_argzero before decode. nfsacld_proc_setacl() then hands both pointers to set_posix_acl() unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation, so an omitted arm is indistinguishable from an explicit request to delete that ACL. A SETACL carrying only NFS_ACL silently strips the directory's default ACL; mask=0 strips both. This is the same defect just fixed in nfsd3_proc_setacl(); apply the same remedy. Gate each set_posix_acl() call on its mask bit and initialize error to 0 so that a request with neither bit set leaves the on-disk ACLs untouched and returns success. The out_drop_lock path and the unconditional posix_acl_release() in nfsaclsvc_release_setacl() already tolerate the skipped arms. Fixes: a257cdd0e217 ("[PATCH] NFSD: Add server support for NFSv3 ACLs.") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever [ adapted four-argument set_posix_acl() calls to the older three-argument inode-based API. ] Signed-off-by: Sasha Levin commit 7ca44a63d9a554ba7ad05b06d88746eab08b760e Author: Jeff Layton Date: Sat Sep 5 10:30:19 2026 -0400 nfsd: fix clock domain mismatch in clients_still_reclaiming() [ Upstream commit 09ea3eb9a518565f5bca386e81b993ed8825f5e8 ] clients_still_reclaiming() computes a deadline from nn->boot_time (CLOCK_REALTIME, ~1.7 billion) but compares it against ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot). The comparison is always false — it would take ~54 years of uptime for BOOTTIME to exceed the REALTIME-derived deadline. This means any client can hold the server in grace indefinitely by sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim operations for all other clients. Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time and use it for the deadline computation. boot_time (CLOCK_REALTIME) is preserved for its cl_boot clientid-nonce role. Fixes: 20b7d86f29d3 ("nfsd: use boottime for lease expiry calculation") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Jeff Layton Link: https://patch.msgid.link/20260611-nfsd-testing-v2-12-5b90e276f2d9@kernel.org Signed-off-by: Chuck Lever [ preserved the branch’s boolean fields instead of the upstream flags bitmap ] Signed-off-by: Sasha Levin commit 154acf97ecd2c0bb00f6533f86d4bd2b934475d5 Author: Jeff Layton Date: Sat Sep 5 09:55:33 2026 -0400 nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create() [ Upstream commit 2c7912732184773dbd371a411da87af1cc080b86 ] nfsd4_create() stores the return value of nfsd4_acl_to_attr() in status, but the switch(create->cr_type) block unconditionally overwrites it in every branch. ACL translation errors are silently discarded, and the CREATE proceeds without the requested ACL. Add an early exit check after nfsd4_acl_to_attr(), matching the pattern already used in nfsd4_setattr(). Fixes: c0cbe70742f4 ("NFSD: add posix ACLs to struct nfsd_attrs") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Jeff Layton [ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] Link: https://patch.msgid.link/20260611-nfsd-testing-v2-5-5b90e276f2d9@kernel.org Signed-off-by: Chuck Lever [ retained unconditional ACL conversion because the older helper already handles null ACLs ] Signed-off-by: Sasha Levin commit bdf5a0f88d21239d8f9f7519b87359ba95fd045c Author: Chris Mason Date: Fri Sep 4 21:50:10 2026 -0400 nfsd: release path refs on follow_down() error [ Upstream commit 6cba08dc1922140d260cfeb30bbda4ee1bf869d8 ] nfsd_cross_mnt() initializes a local struct path with mntget() and dget() before calling follow_down(). On a negative return the error arm jumps to out without releasing those references: err = follow_down(&path, follow_flags); if (err < 0) goto out; follow_down() never drops the caller's entry-time refs on any error sub-case; for example a pre-cross d_manage() failure leaves path untouched, so the mntget()/dget() taken on entry survive the call. Every other early-exit arm in nfsd_cross_mnt() (other-namespace return, IS_ERR(exp2), and the success tail after the swap) already calls path_put(&path); the err < 0 arm is the lone omission. The leak inflates mnt_count and d_count on each failed cross-mount, blocking umount and pinning dentries against the shrinker, and is reachable by any authenticated NFS client through nfsd_lookup_dentry or the NFSv4 READDIR encode path. Fix by calling path_put(&path) before the goto out in the err < 0 arm so the entry-time refs are released on all follow_down() error returns. Fixes: cc53ce53c869 ("Add a dentry op to allow processes to be held during pathwalk transit") Cc: stable@vger.kernel.org Assisted-by: kres:claude-opus-4-7 Signed-off-by: Chris Mason Link: https://patch.msgid.link/20260531-nfsd-testing-v1-2-7bfa481b0540@kernel.org Signed-off-by: Chuck Lever [ retained the older single-argument follow_down(&path) API ] Signed-off-by: Sasha Levin commit fee53224c8261541cf310b57ac7c77a80e144483 Author: Longlong Xia Date: Fri Sep 4 14:49:52 2026 -0400 zram: fix out-of-bounds access in read_block_state() [ Upstream commit 391f057f44a51cc9418da5cba78b014324174264 ] read_block_state() calculates nr_pages before taking dev_lock. If the device is reset and reinitialized with a smaller disksize before lock acquisition, nr_pages still describes the old table. The subsequent loop can then call slot_lock() past the end of the newly allocated table. Read disksize after acquiring dev_lock and checking that the device is initialized. The read lock then keeps the table and its bound stable for the duration of the scan. Link: https://lore.kernel.org/20260804065919.3970386-3-xialonglong2025@163.com Fixes: c0265342bff4 ("zram: introduce zram memory tracking") Assisted-by: Codex:gpt-5.6-sol Signed-off-by: Longlong Xia Reviewed-by: Sergey Senozhatsky Cc: Jens Axboe Cc: Minchan Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 8823fa063f59a5ffc79a3705c98fd48bb11cf23e Author: Sergey Senozhatsky Date: Fri Sep 4 14:49:51 2026 -0400 zram: fixup read_block_state() [ Upstream commit 8b05d2d8af817c6a1e23032df51e7ad83030d543 ] ac_time is now in seconds, do not use ktime_to_timespec64() [akpm@linux-foundation.org: remove now-unused local `ts'] [akpm@linux-foundation.org: fix build] Link: https://lkml.kernel.org/r/20260115033031.3818977-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky Reported-by: Chris Mason Closes: https://lkml.kernel.org/r/20260114124522.1326519-1-clm@meta.com Cc: Brian Geffon Cc: David Stevens Cc: Minchan Kim Cc: Richard Chang Signed-off-by: Andrew Morton [ Stable tree note: The ac_time conversion described above is not present here, so retain the ktime_t conversion and microsecond output. Move the timespec64 temporary into the scan loop instead, allowing the follow-up bounds fix to move nr_pages initialization under init_lock cleanly. ] Stable-dep-of: 391f057f44a5 ("zram: fix out-of-bounds access in read_block_state()") Signed-off-by: Sasha Levin commit b254cdadbcb6bdd0daf7391d63b3b97b2bec1ad9 Author: Chengfeng Ye Date: Thu Sep 3 11:28:29 2026 -0400 KEYS: trusted: Fix TPM teardown ordering [ Upstream commit 5e2d672280d97d83de43031d93761b12dadd7b8a ] trusted_tpm_exit() drops the TPM chip reference and frees the digest array before unregistering the trusted key type. key_type_lookup() holds key_types_sem for reading until the key operation finishes, while unregister_key_type() takes it for writing. It therefore provides the synchronization point that must precede backend teardown. The current order permits this interleaving: CPU 0 CPU 1 trusted_tpm_exit() key_type_lookup("trusted") put_device(&chip->dev) trusted_tpm_seal() kfree(digests) pcrlock() unregister_key_type() tpm_pcr_extend(..., digests) CPU 1 can consequently dereference the freed digest array. The chip can also be released before callbacks stop using it. KASAN reported: BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200 Read of size 2 at addr ffff88810872d000 by task poc/89 Call Trace: tpm_pcr_extend+0x1f0/0x200 pcrlock+0x42/0x70 [trusted] trusted_tpm_seal+0x1b6/0x570 [trusted] trusted_instantiate+0x293/0x340 [trusted] __key_instantiate_and_link+0xb2/0x2b0 __key_create_or_update+0x61e/0xb50 __do_sys_add_key+0x1b8/0x310 Allocated by task 88: __kmalloc_noprof+0x1a7/0x490 do_one_initcall+0xa1/0x390 do_init_module+0x2df/0x840 Freed by task 90: kfree+0x131/0x3c0 trusted_tpm_exit+0x59/0xa0 [trusted] __do_sys_delete_module+0x346/0x510 Move unregister_key_type() before releasing either resource. This stops new lookups and waits for in-flight key operations to finish before the backend state is destroyed. Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") Cc: stable@vger.kernel.org Signed-off-by: Chengfeng Ye Link: https://lore.kernel.org/r/20260731140925.2973492-1-nicoyip.dev@gmail.com Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen [ preserved the additional trusted_shash_release() cleanup after unregister_key_type() ] Signed-off-by: Sasha Levin commit d8ebf8875fb97b3e39aa226af78f9c619e96ee31 Author: Qing Ming Date: Mon Aug 31 22:09:40 2026 -0400 gtp: serialize PDP context updates [ Upstream commit 498386b6d402737db1e2eeed4c385acbf0ef9e34 ] PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp] RBP: dead000000000122 The second deletion dereferenced the poisoned hlist pprev pointer. Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a shared mutex. Keep the mutex held until the final use of a PDP context in the NEWPDP path, and keep the RCU read-side section around the complete PDP context use in the DELPDP path. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Cc: stable@vger.kernel.org Signed-off-by: Qing Ming Link: https://patch.msgid.link/20260818150000.7670-1-a0yami@mailbox.org Signed-off-by: Jakub Kicinski [ adapted the locking changes to the older IPv4-only PDP context API and omitted the absent IPv6 lookup hunk. ] Signed-off-by: Sasha Levin commit 9f8b403d5f8c1ac361533c73fa449153a3c7fc6c Author: Breno Leitao Date: Tue Sep 1 07:19:31 2026 -0400 usb: xhci: bail out of setup if the controller is inaccessible [ Upstream commit 78203d5b54a40f0e36196ebf31c9c7a380fc8811 ] xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal. Fixes: 66d4eadd8d06 ("USB: xhci: BIOS handoff and HW initialization.") Cc: stable@vger.kernel.org Signed-off-by: Breno Leitao Signed-off-by: Mathias Nyman Link: https://patch.msgid.link/20260806142113.2436238-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman [ adapted the double hc_capbase register read via hcc_params/hci_version to use a single new local hc_capbase variable ] Signed-off-by: Sasha Levin commit 92faaee1b108c6e4b07730d20896a6593a85f675 Author: Baokun Li Date: Mon Aug 31 17:09:46 2026 -0400 fuse: fix invalidate lock leak on setattr writeback failure [ Upstream commit 9afeca0d569c9fc89d758fe7a9339d1e8afb1546 ] fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ notify_change() # KILL_SUID -> ATTR_MODE └─ fuse_setattr() # no killpriv: │ # ia_valid |= ATTR_MODE └─ fuse_do_setattr() ├─ filemap_invalidate_lock() # IS_DAX && is_truncate └─ write_inode_now() # is_wb && ATTR_MODE └─ if (err) # e.g. daemon -> -EIO return err # <- lock leaked Fix this by adding an unlock label that releases the lock before returning the error, and use it for the fuse_dax_break_layouts() failure path as well. Fixes: 6ae330cad6ef ("virtiofs: serialize truncate/punch_hole and dax fault path") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Baokun Li Signed-off-by: Miklos Szeredi [ replaced up_write(&fi->i_mmap_sem) locking and (inode, 0, 0) call site instead of the mainline filemap_invalidate_lock/(inode, 0, -1) forms ] Signed-off-by: Sasha Levin commit 69a294e561c10909688bcb25456535dcd1818e1a Author: Baokun Li Date: Mon Aug 31 14:00:15 2026 -0400 fuse: fix invalidate lock leak on open O_TRUNC DAX failure [ Upstream commit a927f1867e61b78f39f9da0bbba3c98c2ca151fe ] fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() # dax_truncate └─ fuse_dax_break_layouts() └─ dax_break_layout() └─ wait_page_idle() # TASK_INTERRUPTIBLE └─ fuse_wait_dax_page() # unlock, schedule, re-lock └─ signal → -ERESTARTSYS goto out_inode_unlock # <- lock leaked Fix this by moving filemap_invalidate_unlock() below the label so that all error paths release the lock, and rename the label to out_unlock as it now covers more than just the inode lock. Fixes: 2fdbb8dd0155 ("fuse: fix deadlock between atomic O_TRUNC and page invalidation") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Baokun Li Signed-off-by: Miklos Szeredi [ changed goto target from out_inode_unlock to out_unlock and relocated the out_unlock label before up_write() on i_mmap_sem, adapting the fix from filemap_invalidate_lock/unlock and fuse_open() to 5.10's i_mmap_sem/down_write/up_write and fuse_open_common() ] Signed-off-by: Sasha Levin commit 12295e0728488105b152b57fe8bc5e86f1d21a73 Author: Xiang Mei Date: Tue Sep 29 10:31:17 2026 -0400 vlan: require the MAC header to be present in __vlan_insert_inner_tag() [ Upstream commit ab888242fce4f16f6c4d4c6ec53939ad36aa3b3a ] __vlan_insert_inner_tag() only guarantees head room via skb_cow_head(), never that mac_len bytes of MAC header are present. Its ETH_HLEN wrappers - __vlan_insert_tag() under skb_vlan_push(), and vlan_insert_tag() under validate_xmit_vlan() on the generic transmit path - therefore rewrite the first 16 bytes at skb->data: a 12-byte memmove plus two 2-byte stores at +12 and +14. No caller supplies the bound, while the pop helpers use skb_ensure_writable()/pskb_may_pull(). An IFF_TUN device has hard_header_len == 0, so packet_snd() accepts a one-byte AF_PACKET/SOCK_RAW frame. The first vlan push only sets a hwaccel tag; the next - clsact "action vlan push" or bpf_skb_vlan_push() - enters the helper with skb->len still 1. The head comes from skbuff_small_head without __GFP_ZERO, so each push drags bytes from beyond skb->tail into the frame. After three the one-byte send leaves as 13 bytes carrying 11 bytes of uninitialised slab: 0000: 5a b3 62 12 80 88 ff ff 00 b3 62 12 81 `------------------------------' only 0x5a was sent; the rest is slab, here the top 56 bits of a linear-map address Require the MAC header the helper rewrites to be present, so such a frame is dropped rather than transmitted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: co+0ea1ac045375cf05@bugs.sh Signed-off-by: Xiang Mei Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260915083152.705309-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski [ adjusted context around skb_cow_head(skb, VLAN_HLEN) because the branch lacks upstream meta_len handling. ] Signed-off-by: Sasha Levin commit 22886b1b7464613373c9a7d0af2ace029c50cd97 Author: Frank Sorenson Date: Tue Sep 22 22:03:03 2026 -0400 smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() [ Upstream commit eeb5ef6083e1cefa2ef75041b5597ff228b8d7bb ] In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small". Fixes: 95907fea4fd8 ("cifs: Add support for reading attributes on SMB2+") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Reviewed-by: David Howells Signed-off-by: Paulo Alcantara [ Replaced unavailable smb_EIO2() tracing calls with -EIO. ] Signed-off-by: Sasha Levin commit 1ed29f7a03417b405f38c09cfe04124883127b53 Author: Frank Sorenson Date: Tue Sep 22 21:40:21 2026 -0400 smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs [ Upstream commit 05762c5bc1cfdcac36747994fde2c04387a457f1 ] Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. Fixes: b24df3e30cbf ("cifs: update receive_encrypted_standard to handle compounded responses") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Reviewed-by: David Howells Signed-off-by: Paulo Alcantara [ Replaced unavailable MID_HEADER_SIZE(server) with (HEADER_SIZE(server) - 1). ] Signed-off-by: Sasha Levin commit 67ef1d6da00f4f39eb5fcebe7a44fe494b645059 Author: Frank Sorenson Date: Tue Sep 22 17:23:32 2026 -0400 smb: client: fix potential OOB read in smb3_enum_snapshots() [ Upstream commit 4775c3b7a597907e0b97556c7986fda238a377ae ] If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. Fixes: e02789a53d71 ("smb3: enumerating snapshots was leaving part of the data off end") Cc: stable@vger.kernel.org Signed-off-by: Frank Sorenson Reviewed-by: David Howells Signed-off-by: Paulo Alcantara Signed-off-by: Sasha Levin commit 2e23abdaf6d32aa112efaa474629af7584d3acc6 Author: Daehyeon Ko <4ncienth@gmail.com> Date: Tue Sep 22 15:51:39 2026 -0400 wifi: libipw: reject TKIP frames without a full MIC [ Upstream commit 06f42accaf3c6aecab1dcc57f68dde6c06c8b380 ] libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. Fixes: b453872c35cf ("[NET] ieee80211 subsystem") Cc: stable@vger.kernel.org Assisted-by: LLM Signed-off-by: Daehyeon Ko <4ncienth@gmail.com> Link: https://patch.msgid.link/20260909061124.3802517-1-4ncienth@gmail.com Signed-off-by: Johannes Berg [ adapted libipw changes to the older lib80211 implementation and Michael MIC helper interface. ] Signed-off-by: Sasha Levin commit 13b9519b19e6e58a6cd01e63062cd1da7bd6449a Author: Bjoern Doebel Date: Thu Sep 17 09:15:35 2026 -0400 smb: client: avoid leaking refcount in cifs_queue_oplock_break() [ Upstream commit 9f2e63f1b2d5fc5b5423424902c091123e220e7e ] cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again and are leaking this reference. This can be triggered when interacting with a slow-responding server. As a result, later unmount operations for this file system will fail with BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) kernel BUG at fs/super.c:777! Fix this by only incrementing the reference count if the work has been queued successfully. Taking it after queue_work() is safe because all three callers hold tcon->open_file_lock across the call and _cifsFileInfo_put() decrements under that same lock, so a worker that starts the handler in the window cannot drop the reference before it has been taken. Fixes: b98749cac4a69 ("CIFS: keep FileInfo handle live during oplock break") Cc: stable@vger.kernel.org Assisted-by: Kiro:claude-opus-5 Signed-off-by: Bjoern Doebel Reviewed-by: Namjae Jeon Signed-off-by: Paulo Alcantara [ Adjusted the patch path from fs/smb/client/misc.c to fs/cifs/misc.c. ] Signed-off-by: Sasha Levin commit 91da70a2e5c6f54e1316d51e0e6911e78ef5e09a Author: Aohan Mei Date: Wed Sep 16 23:29:25 2026 -0400 smb: client: reject userspace cifs.idmap descriptions [ Upstream commit d9d7eeb0cea5b55b82888f443622fd8d4ee064f3 ] cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. Fixes: 4d79dba0e007 ("cifs: Add idmap key and related data structures and functions (try #17 repost)") Reported-by: TencentOS Corvus AI Cc: stable@vger.kernel.org Assisted-by: CodeBuddy:Kimi-K3 Signed-off-by: Aohan Mei Acked-by: David Howells Signed-off-by: Paulo Alcantara Signed-off-by: Sasha Levin commit aa4a3bec32ffe20ba1044db8211140edf7637310 Author: Jens Axboe Date: Wed Sep 16 21:13:19 2026 -0400 io_uring/rw: end write accounting from ->ki_complete [ Upstream commit 796aa0547557e63338657ed1c487906f9fac4c73 ] Commit b000145e9907 moved both the fsnotify calls and the write accounting out of the kiocb completion handler and into the io_req_rw_complete() task_work. However, only the fsnotify part actually needed to move as it may sleep. Ending the write accounting is just a percpu_up_read() on the superblock writers sem. Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE protection depend on the ring owner getting to running task_work. But the task may be blocked in freeze_super(), causing it to never get to that: task io-wq worker -------------------------------------------------------------- io_write() io_kiocb_start_write() (takes sb_writers, hidden from lockdep by __sb_writers_release) write_iter() -> -EIOCBQUEUED ioctl(FS_IOC_SHUTDOWN) bdev_freeze() freeze_super() percpu_down_write() <- waits for the reader above io_write() kiocb_start_write() percpu_down_read() <- queued behind the writer io_complete_rw() queues io_req_rw_complete() <- never runs, task is in D state End the write from io_complete_rw() instead, and leave only the fsnotify calls in task_work. Reported-by: syzbot+2eb3d983669d3e49d4fa@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: b000145e9907 ("io_uring/rw: defer fsnotify calls to task context") Signed-off-by: Jens Axboe [ placed write-accounting release after __io_complete_rw_common() to accommodate the older retry path’s early return. ] Signed-off-by: Sasha Levin commit 7ee2c0f82354da9bae04b14e0e5b2037d2de48a7 Author: XingWang Xiang Date: Wed Sep 16 19:53:35 2026 -0400 genetlink: pin family module during policy dump [ Upstream commit 6a1094c34d176827b2b173e163dcc964a13af93f ] The generic netlink controller's policy dump keeps pointers to the target family's operation and policy tables in its callback state. A dump may be split across multiple skbs and remain pending after the initial request. Netlink pins the module which owns the dump callback, but in this case that is the controller's owner rather than the target family's owner. The target family can consequently be unregistered and its module unloaded while a policy dump is pending. Advancing the dump then dereferences policy memory from the unloaded module. Take a reference to the target family's module when the dump starts. Drop it from the error and done paths. This matches the lifetime for which the dump context retains the family and policy pointers. Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace") Cc: stable@vger.kernel.org Signed-off-by: XingWang Xiang Link: https://patch.msgid.link/20260902084317.4092542-1-v3rdant.xiang@gmail.com Signed-off-by: Jakub Kicinski [ adapted split-operation iterator handling to the older genl_ops and opidx interfaces. ] Signed-off-by: Sasha Levin commit b9b34cc149f8344d1cffbf318eb1c8cb414f74ac Author: Xu Rao Date: Wed Sep 16 15:43:37 2026 -0400 Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev [ Upstream commit f5a427b16e45210dee656b0860728f3d496dee85 ] The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Fixes: 9a39a927be01 ("Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function") Cc: stable@vger.kernel.org Acked-by: Bartosz Golaszewski Reviewed-by: Dmitry Baryshkov Signed-off-by: Xu Rao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit e50fcf8357579d43d6824e3779b351efd8141bc4 Author: Uwe Kleine-König Date: Wed Sep 16 15:43:36 2026 -0400 Bluetooth: btqcomsmd: Convert to platform remove callback returning void [ Upstream commit 4a62832f565c950d645a4f7b199a0a7985815940 ] The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: f5a427b16e45 ("Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev") Signed-off-by: Sasha Levin commit 9fa1fb4a876e10cc17182ce339625ec4d4b75f20 Author: Thomas Gleixner Date: Wed Sep 16 13:34:57 2026 -0400 tick/broadcast: Plug clockevents replacement race [ Upstream commit 113a9796effe3376d2ec5aabcca1fef4fef4cd62 ] 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it. Fixes: f8381cba04ba ("[PATCH] tick-management: broadcast functionality") Reported-by: 朱恺乾 Signed-off-by: Thomas Gleixner Signed-off-by: Thomas Gleixner Reviewed-by: Bradley Morgan Tested-by: 刘术高 Cc: stable@vger.kernel.org Link: https://patch.msgid.link/87cymdsu0r.ffs@tglx [ replaced scoped_guard() with a nested guard() block for GNU89 compatibility. ] Signed-off-by: Sasha Levin commit f13308f19d710c41a91421ad8a9dce5ed9f82ad0 Author: Chao Yu Date: Sat Sep 12 16:59:04 2026 -0400 f2fs: embed f2fs_gc_kthread in f2fs_sb_info [ Upstream commit 3d7bca9d583793bb7d0bac0d95a24ddd2e129eed ] Instead of allocating f2fs_gc_kthread dynamically, embed it in f2fs_sb_info. This simplifies lifetime management and prepares for fixing race conditions during teardown. - __sbi_store - remount|shutdown - f2fs_stop_gc_thread - access sbi->gc_thread - sbi->gc_thread = NULL - access sbi->gc_thread->f2fs_gc_task Fixes: 52190933c37a ("f2fs: sysfs: introduce critical_task_priority") Fixes: 7950e9ac638e ("f2fs: stop gc/discard thread after fs shutdown") Cc: stable@kernel.org Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim [ Omitted hunks for upstream GC features absent from Linux 5.10. ] Signed-off-by: Sasha Levin commit a0c6842ec825a91693626dbd9a4c54f2b9dc15ea Author: Nilesh Javali Date: Fri Sep 11 15:32:22 2026 -0400 scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] [ Upstream commit 4cf38dd9465736141263ebb63375868311a0ec81 ] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). Fixes: 01e0e15c8b3b ("scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly") Cc: stable@vger.kernel.org Reported-by: Sashiko Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-31-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ adapted validation to the older qla2xxx handler layout. ] Signed-off-by: Sasha Levin commit 2089647f81ff5263867ec08589f273899016ad4a Author: Nilesh Javali Date: Fri Sep 11 13:16:13 2026 -0400 scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown [ Upstream commit 19788a55cab61d78e33e0914a5a31d27843e8a4a ] The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an uninitialized work_struct. Fixes: 68ca949cdb04 ("[SCSI] qla2xxx: Add CPU affinity support.") Reported-by: Sashiko Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260730155838.2119230-5-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) Signed-off-by: Sasha Levin commit b65e3a82f77b7a63e386623d2ea70d2b5580295a Author: Nilesh Javali Date: Fri Sep 11 13:16:12 2026 -0400 scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking [ Upstream commit 34a40e0dff940ac5eba494a69b553ea571e24873 ] qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing bugs exposed on the error path of qla25xx_create_{req,rsp}_que(): 1. When dma_alloc_coherent() fails during queue creation, the error path calls the free function with req->ring / rsp->ring still NULL (from kzalloc). The unconditional dma_free_coherent() with a NULL cpu_addr is undefined behavior and can panic. 2. The free functions clear req_qid_map / rsp_qid_map under vport_lock, but the create functions protect the same bitmaps with mq_lock. This provides no mutual exclusion. Additionally, the create error path clears the bit and releases mq_lock before calling the free function, creating a window where another thread can allocate the same que_id and have its ha->req_q_map entry clobbered by the subsequent lockless NULL assignment in the free function. Fix by: - Guarding dma_free_coherent() with a NULL check on the ring pointer. - Using mq_lock (the lock held by all creators) in the free functions to atomically NULL the map entry and clear the bitmap bit. - Removing the now-redundant clear_bit blocks from the create error paths since the free functions handle it atomically. Signed-off-by: Nilesh Javali Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260723050413.3897522-41-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) Backport adaptation for the stable tree: the 29xx IOCB size-selection helpers are absent, and queue creation still allocates fixed-size entries. Initialize the local req_entry_size and rsp_entry_size values with sizeof(request_t) and sizeof(response_t), respectively, so DMA freeing continues to match allocation without adding helper functions or 29xx support. Retain all NULL-ring guards, mq_lock protection, and removal of the premature bitmap clears. Keep the response-ring cleanup layout used by upstream so target commit 19788a55cab61d78e33e0914a5a31d27843e8a4a applies unchanged. Stable-dep-of: 19788a55cab6 ("scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown") Signed-off-by: Sasha Levin commit eeef4fa993b3f962de9b45999f12ff25a5c79ce7 Author: Nilesh Javali Date: Fri Sep 11 11:33:25 2026 -0400 scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak [ Upstream commit a152edab3854f01dd2daf3eaf8f32cbabdb3834e ] qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). Fixes: ec89146215d1 ("qla2xxx: Add bsg interface to support D_Port Diagnostics.") Cc: stable@vger.kernel.org Signed-off-by: Nilesh Javali Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260723050413.3897522-54-njavali@marvell.com Signed-off-by: Martin K. Petersen (Oracle) [ Adapted kzalloc_obj(*dd) to kzalloc(sizeof(*dd), GFP_KERNEL) to match the branch’s allocation syntax. ] Signed-off-by: Sasha Levin commit 3da26db3323cbccf509005fdbc4ebae842d323cd Author: Christian Borntraeger Date: Fri Sep 11 08:43:13 2026 -0400 KVM: s390: Zero initialize data structures for inject_pfault_token [ Upstream commit 4e2c7f7cbc27418f9a290399b986c1b85ff93b90 ] __kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of the on-stack struct kvm_s390_irq but the full ext substructure is copied into the cpu local variable on inject. ext_params and pad contain stale stack values. Interrupt delivery only uses ext_params2, so nothing leaks to the guest, but a host user can use the migration ioctls to get to the data. Fix by zero-initializing the irq struct. Do the same for the inti data structure. Fixes: 383d0b050106 ("KVM: s390: handle pending local interrupts via bitmap") Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger Reviewed-by: Matthew Rosato Reviewed-by: Claudio Imbrenda Signed-off-by: Claudio Imbrenda Message-ID: <20260805110455.7200-3-borntraeger@linux.ibm.com> [ Adjusted context for missing inti_mem and ret declarations in __kvm_inject_pfault_token(). ] Signed-off-by: Sasha Levin commit 037e71058e8a59568db72015d4386f54e54dff77 Author: Tristan Madani Date: Thu Sep 10 20:34:12 2026 -0400 nvme: add missing SRCU grace period in error path [ Upstream commit ef248d5de4469fb6bbaf8dbe0c4c47800080d648 ] nvme_alloc_ns() error path at out_unlink_ns removes ns from the namespace head siblings list with list_del_rcu(&ns->siblings) but does not wait for SRCU readers before freeing the namespace struct. Multipath code iterates the head->list under srcu_read_lock() in nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent reader can still hold a reference to ns when kfree(ns) runs. The normal removal path in nvme_ns_remove() correctly calls synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for in-progress readers. Add the same grace period in the error path. Fixes: ed754e5deeb1 ("nvme: track shared namespaces") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Reviewed-by: Sagi Grimberg Reviewed-by: John Garry Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch [ Adjusted patch context to account for missing last_path reference-counting code. ] Signed-off-by: Sasha Levin commit 3fb8386682ef4d0858c38bf0d8d8a47ba171fa23 Author: Masami Hiramatsu (Google) Date: Thu Sep 10 11:44:46 2026 -0400 kprobes: Protect kprobe_blacklist with RCU [ Upstream commit 0c4256196b3a105307e2235fbfd85e768bbcdd0f ] __within_kprobe_blacklist() traverses kprobe_blacklist without holding kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist() removes blacklist entries and immediately frees them with kfree(). A concurrent call to within_kprobe_blacklist() can therefore dereference freed memory. Furthermore, within_kprobe_blacklist() can be called in atomic or non-preemptible contexts where the sleeping kprobe_mutex cannot be taken. Protect kprobe_blacklist with RCU. Use guard(rcu)() and list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim entries safely after a grace period. Link: https://lore.kernel.org/all/178810004323.64882.16493230858653316962.stgit@devnote2/ Fixes: 376e242429bf ("kprobes: Introduce NOKPROBE_SYMBOL() macro to maintain kprobes blacklist") Cc: stable@vger.kernel.org Reported-by: Sashiko Closes: https://lore.kernel.org/all/20260807155802.F06041F000E9@smtp.kernel.org/ Assisted-by: Antigravity:gemini-3.7-flash Signed-off-by: Masami Hiramatsu (Google) [ Replaced guard(rcu)() with explicit rcu_read_lock()/rcu_read_unlock() to avoid declaration-after-statement warnings. ] Signed-off-by: Sasha Levin commit 0124b36a7eac1dd0402146fc6c1f732877b9cd9f Author: Steven Rostedt Date: Thu Sep 10 12:31:35 2026 -0400 ftrace: Take trace_array reference before accessing its ftrace_ops [ Upstream commit 9100191e5acb2e5ea2313f436667bb5fce129f47 ] The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260828223901.29e26edb@robin Fixes: 591dffdade9f0 ("ftrace: Allow for function tracing instance to filter functions") Reported-by: Breno Leitao Tested-by: Breno Leitao Closes: https://lore.kernel.org/all/apGORjltZgAiAYHT@gmail.com/ Signed-off-by: Steven Rostedt [ Replaced kzalloc_obj(*iter) with kzalloc(sizeof(*iter), GFP_KERNEL) for Linux 5.10. ] Signed-off-by: Sasha Levin commit 0c1f8bada613edbd810d010996d36159092576d5 Author: Muhammad Bilal Date: Thu Sep 10 07:42:23 2026 -0400 staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() [ Upstream commit 28a289beaf226b30b1e6e7d7b1a2946fe2d6e852 ] rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE. Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable@vger.kernel.org Signed-off-by: Muhammad Bilal Link: https://patch.msgid.link/20260728125456.32359-4-meatuni001@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 1b786350924cc0fa30d4434470b32f24e8ddd107 Author: Vivek BalachandharTN Date: Thu Sep 10 07:42:22 2026 -0400 staging: rtl8723bs: fix spacing around operators [ Upstream commit 2038fe84b8bdf894b634f777096685e78e8f3774 ] Fix several instances where operators lacked spaces around them. This improves readability and brings the driver closer to kernel coding-style guidelines. No functional change. Signed-off-by: Vivek BalachandharTN Link: https://patch.msgid.link/20251205021417.2705864-3-vivek.balachandhar@gmail.com Signed-off-by: Greg Kroah-Hartman For this stable dependency, retain only the spacing change to the IE advance in rtw_restruct_wmm_ie(). This supplies the exact context needed by target commit 28a289beaf226 ("staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()"). Drop the unrelated operator-spacing hunks. Keep the existing bounds-first WMM match condition from stable commit 4dd2d9cf563c5 (upstream a75281626fc8f); applying the older condition would undo its out-of-bounds-read fix. No functional change. Stable-dep-of: 28a289beaf22 ("staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()") Signed-off-by: Sasha Levin commit 75e7e19e9218e3b895e652f04acf08113dc3aa00 Author: Fan Wu Date: Wed Sep 9 20:18:07 2026 -0400 wifi: rtl8xxxu: fix use-after-free from rx_urb_wq on stop [ Upstream commit 6c080026ecc17eecb103f8927c64ea73a74bb818 ] rtl8xxxu arms rx_urb_wq from the RX completion path: rtl8xxxu_rx_complete() hands the URB to rtl8xxxu_queue_rx_urb(), which queues it on rx_urb_pending_list and, once the list grows past RTL8XXXU_RX_URB_PENDING_WATER, schedules rx_urb_wq. The worker rtl8xxxu_rx_urb_work() drains rx_urb_pending_list, recovers priv through container_of, and resubmits each URB through rtl8xxxu_submit_rx_urb(), which anchors it on rx_anchor and dereferences priv->udev. rtl8xxxu_stop() cancels the sibling work items (c2hcmd_work, ra_watchdog, update_beacon_work) but never cancels rx_urb_wq, so a worker armed during the last burst of RX traffic can run rtl8xxxu_rx_urb_work() after rtl8xxxu_disconnect() has called ieee80211_free_hw(), which frees priv, producing a use-after-free. The window opens under active RX traffic (pending count above the watermark) followed by a disconnect. There are two teardown races to close: * rtl8xxxu_queue_rx_urb() decided whether to enqueue under rx_urb_lock but called schedule_work() after dropping the lock. A completion that observed shutdown == false and released the lock could then call schedule_work() after rtl8xxxu_stop() had set shutdown and cancel_work_sync() had already returned, arming the worker to run after the teardown. Move schedule_work() under the same !shutdown branch so the arming decision is atomic with the shutdown check. * rtl8xxxu_rx_urb_work() anchors every URB it drained back onto rx_anchor through rtl8xxxu_submit_rx_urb(). A worker still running when usb_kill_anchored_urbs(&priv->rx_anchor) returned would submit a URB that escaped the kill. In rtl8xxxu_stop(), call cancel_work_sync(&priv->rx_urb_wq) before the kill so the worker is drained first. After priv->shutdown is set under rx_urb_lock, completions can no longer queue rx_urb_wq. cancel_work_sync() then drains the last queued or running worker, and the following usb_kill_anchored_urbs() kills the URBs it may have submitted. rtl8xxxu_disconnect() is covered because ieee80211_unregister_hw() guarantees .stop() runs for a live interface before ieee80211_free_hw() frees priv. The probe error path needs no cancel: rx_urb_wq is INIT_WORK()'d there but cannot have been scheduled, since no URB is submitted before ieee80211_register_hw() succeeds. This bug was found by static analysis. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Cc: stable@vger.kernel.org Signed-off-by: Fan Wu Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20260630033117.3377-1-fanwu01@zju.edu.cn Signed-off-by: Sasha Levin commit b674af31d044a86bd094ba8bb8f2bb92fb49aac5 Author: Yehyeong Lee Date: Wed Sep 9 06:49:57 2026 -0400 nvme-tcp: reject a read that transferred too few bytes [ Upstream commit 7fa3f73f6c8ddc5f0425b50fb2a626a782ef7d12 ] nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above. A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target. Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Cc: stable@vger.kernel.org Signed-off-by: Yehyeong Lee Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit d59b7ceff12bbc4fe85882838dd22a5d88160c25 Author: Daniel Wagner Date: Wed Sep 9 06:49:56 2026 -0400 nvme-tcp: Do not reset transport on data digest errors [ Upstream commit 1ba2e507f55c5b0cbde8c0fbfe0d9e39612a3e52 ] The spec says 7.4.6.1 Digest Error handling When a host detects a data digest error in a C2HData PDU, that host shall continue processing C2HData PDUs associated with the command and when the command processing has completed, if a successful status was returned by the controller, the host shall fail the command with a non-fatal transport error. Currently the transport is reseted when a data digest error is detected. Instead, when a digest error is detected, mark the final status as NVME_SC_DATA_XFER_ERROR and let the upper layer handle the error. In order to keep track of the final result maintain a status field in nvme_tcp_request object and use it to overwrite the completion queue status (which might be successful even though a digest error has been detected) when completing the request. Signed-off-by: Daniel Wagner Reviewed-by: Sagi Grimberg Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig Stable-dep-of: 7fa3f73f6c8d ("nvme-tcp: reject a read that transferred too few bytes") Signed-off-by: Sasha Levin commit effe898669c5f69ed519d6339be01ee9cd91d1a4 Author: Yehyeong Lee Date: Wed Sep 9 06:45:13 2026 -0400 nvme-tcp: fix host memory disclosure on R2T for a read command [ Upstream commit 6efbc52237facda35d2d874fe1765bb4839275d8 ] nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller. The command then completes normally and nothing is logged. Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers. Reject an R2T for a request that is not a write. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Cc: stable@vger.kernel.org Signed-off-by: Yehyeong Lee Signed-off-by: Keith Busch Signed-off-by: Sasha Levin commit f619d96a387606fe1b3a01fd20cf36690456d7ff Author: Varun Prakash Date: Wed Sep 9 06:45:12 2026 -0400 nvme-tcp: validate R2T PDU in nvme_tcp_handle_r2t() [ Upstream commit 1d3ef9c3a39e04be31155c27ebf80342350c3abf ] If maxh2cdata < r2t_length then driver will form multiple H2CData PDUs, validate R2T PDU in nvme_tcp_handle_r2t() to reuse nvme_tcp_setup_h2c_data_pdu(). Also set req->state to NVME_TCP_SEND_H2C_PDU in nvme_tcp_setup_h2c_data_pdu(). Signed-off-by: Varun Prakash Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Stable-dep-of: 6efbc52237fa ("nvme-tcp: fix host memory disclosure on R2T for a read command") Signed-off-by: Sasha Levin commit 3f28574dd59672ac47f3110c9a8ead703ec021c0 Author: Doruk Tan Ozturk Date: Wed Sep 9 06:54:28 2026 -0400 ocfs2: validate directory-index entry counts when reading metadata [ Upstream commit bc70726ddad53c7e9a9a85915bf2415b0d4f42f9 ] ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). Link: https://lore.kernel.org/20260713205625.92391-1-doruk@0sec.ai Fixes: 9b7895efac90 ("ocfs2: Add a name indexed b-tree to directory inodes") Fixes: 4ed8a6bb083b ("ocfs2: Store dir index records inline") Assisted-by: 0sec:claude-opus-4-8 Signed-off-by: Doruk Tan Ozturk Reviewed-by: Joseph Qi Cc: Joel Becker Cc: Kees Cook Cc: Mark Fasheh Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 832da7b4d3134ea1540ccbac16485db758044efb Author: Joseph Qi Date: Wed Sep 9 06:54:27 2026 -0400 ocfs2: validate dx_root extent list fields during block read [ Upstream commit 775c17386a6fd695f999d4cda90e3931386570dd ] Patch series "ocfs2: consolidate extent list validation into block read callbacks". ocfs2 validates extent list fields (l_count, l_next_free_rec) at various points during extent tree traversal. This is fragile because each caller must remember to check for corrupted on-disk data before using it. This series moves those checks into the block read validation callbacks (ocfs2_validate_dx_root and ocfs2_validate_extent_block), so corrupted fields are caught early at block read time. Redundant post-read checks are then removed. This patch (of 4): Move the extent list l_count validation from ocfs2_dx_dir_lookup_rec() into ocfs2_validate_dx_root(), so that corrupted on-disk fields are caught early at block read time rather than during directory lookups. Additionally, add a l_next_free_rec <= l_count check to prevent out-of-bounds access when iterating over extent records. Both checks are skipped for inline dx roots (OCFS2_DX_FLAG_INLINE), which use dr_entries instead of dr_list. Link: https://lkml.kernel.org/r/20260403090803.3860971-1-joseph.qi@linux.alibaba.com Link: https://lkml.kernel.org/r/20260403090803.3860971-2-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi Reviewed-by: Heming Zhao Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Signed-off-by: Andrew Morton Stable-dep-of: bc70726ddad5 ("ocfs2: validate directory-index entry counts when reading metadata") Signed-off-by: Sasha Levin commit 3e9c9090d4cc5a61ab5067ac5502c4fd37891b97 Author: Dave Airlie Date: Tue Sep 8 14:22:30 2026 -0400 nouveau/gem: reserve the bo in the info ioctl around the vma lookup [ Upstream commit 5e17160d41d92823f3379c1982e1369680c5ce4d ] In the non-uvmm path, there could be a race between the info lookup finding the vma, and the gem close path closing the vma leading to a use-after-free. Spotted with the help of Opus 4.6. Signed-off-by: Dave Airlie Fixes: e758a3111914 ("drm/nouveau: fixup gem_info ioctl to return client-specific bo virtual") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260612020658.3176270-1-airlied@gmail.com Signed-off-by: Danilo Krummrich [ adapted VMM and UVMM handling to the legacy direct VMM selection and condition. ] Signed-off-by: Sasha Levin commit f7baf60435129e3a5f3500a38e3cb4c3860deed7 Author: Frank Sorenson Date: Mon Sep 7 10:26:28 2026 -0400 smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() [ Upstream commit 6343c1da561962688f203362d80d6a3bfa39fa1b ] coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. Fixes: e4eb295d38b5 ("[PATCH] cifs: Handle multiple response transact2 part 1 of 2") Cc: stable@vger.kernel.org Reported-by: Shen Yongchao Signed-off-by: Frank Sorenson Signed-off-by: Namjae Jeon Signed-off-by: Paulo Alcantara [ transplanted the bounds validation to coalesce_t2() in smb1ops.c due to code relocation ] Signed-off-by: Sasha Levin commit a6eaf7bd229d0940ba8f126c684a663a680abef1 Author: Michael Bommarito Date: Sun Sep 6 11:35:15 2026 -0400 ceph: bound num_export_targets array for mds info v2/v3 [ Upstream commit a3eb169ee297aa99670ba927c659990bd1e453f3 ] ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from each per-mds info record and advances the decode cursor by num_export_targets * sizeof(u32) without first checking that many bytes remain. The only upper-bound check that catches a runaway cursor (*p > info_end) is gated on info_v >= 4, because info_end is left NULL for info_v 2 and 3. When the monitor sends an MDS map whose per-mds info version is 2 or 3 with an oversized num_export_targets, the cursor moves past the message front buffer and the later export-targets loop calls the unchecked ceph_decode_32() on out-of-bounds memory. A kernel client processes CEPH_MSG_MDS_MAP from its monitor session (net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an on-path attacker on an unsigned/unencrypted messenger session, can therefore drive an out-of-bounds read in the client kernel; on x86_64 with KASAN it is reported as a slab-out-of-bounds read in ceph_mdsmap_decode(). The decoded values land in the internal info->export_targets[] array, so the consequence is a kernel out-of-bounds read, not an information leak to the attacker. Impact: a malicious or compromised Ceph monitor sending an MDS map with a per-mds info version of 2 or 3 and an oversized num_export_targets field triggers an out-of-bounds read in the CephFS client kernel. Add a ceph_decode_need() for the export-targets array before advancing the cursor, so the bound is enforced for every info_v >= 2, not only info_v >= 4. This mirrors the count-then-need idiom already used for m_data_pg_pools later in the same function. Compute the export-targets byte count with size_mul() and reuse that checked length when advancing the cursor, so the attacker-controlled num_export_targets multiplication fails closed on overflow rather than relying on the later kcalloc() guard. Cc: stable@vger.kernel.org Fixes: d463a43d69f4 ("ceph: CEPH_FEATURE_MDSENC support") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Viacheslav Dubeyko Signed-off-by: Ilya Dryomov [ omitted the newer-kernel-only adjacent `u32 target` local absent from Linux 5.10. ] Signed-off-by: Sasha Levin commit aadfe588ad8032ea99bda259ae7b8d42854f8193 Author: Michael Bommarito Date: Sun Sep 6 11:03:39 2026 -0400 ceph: bound copied dentry name length in NFS export get_name [ Upstream commit eff8013c5a8916613c742ae5a2cc341cb605c0ae ] ceph_get_name() copies the MDS-supplied name into the caller's NAME_MAX-sized buffer with memcpy(name, rinfo->dname, rinfo->dname_len) and then writes name[rinfo->dname_len] = 0, without checking dname_len against NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME reply with dname_len > NAME_MAX overflows the buffer. __get_snap_name() copies rde->name / rde->name_len the same unchecked way. Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX name buffer in a client's NFS-export get_name path, a slab out-of-bounds write reported by KASAN. Reachable when a CephFS mount is re-exported over NFS. Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with -ENAMETOOLONG before the copy, and use it in both ceph_get_name() and __get_snap_name(). Cc: stable@vger.kernel.org Fixes: 19913b4eac4a ("ceph: add get_name() NFS export callback") Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Michael Bommarito Reviewed-by: Viacheslav Dubeyko Signed-off-by: Ilya Dryomov [ adapted the bounds check to the older ceph_get_name() flow without encrypted-name handling. ] Signed-off-by: Sasha Levin commit d15f76fddc5d0215db5f18851048376a1ea79bd6 Author: Jeff Layton Date: Sat Sep 5 12:50:46 2026 -0400 nfsd: fix nfsd_file leak on inter-server COPY setup failure [ Upstream commit 88a76145451d703eedd867b5989bf73d17340399 ] When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly. Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy") Cc: stable@vger.kernel.org Assisted-by: kres:claude-opus-4-7 Signed-off-by: Jeff Layton Link: https://patch.msgid.link/20260531-nfsd-testing-v1-3-7bfa481b0540@kernel.org Signed-off-by: Chuck Lever [ adjusted cleanup paths to omit unavailable trace_nfsd_copy_*() calls ] Signed-off-by: Sasha Levin commit 45a8fc4a12751833ed3868095d18200a85336760 Author: Xu Yang Date: Fri Sep 4 20:16:46 2026 -0400 device property: fix infinite loop in fwnode_for_each_child_node() [ Upstream commit 1900692555826753adab8799a1a8d50bb1ee200c ] When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL │ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1 │ │ fwnode_get_next_child_node(FWa, FWb1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1 └────┘ This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}. The root cause is that when the current child (FWb1) belongs to the secondary fwnode, calling get_next_child_node() on the parimary fwnode incorrectly returns the first child (FWa1) again instead of NULL. Fix this by dynamically checking the parent fwnode of the current child before calling get_next_child_node(). This approach follows the pattern established in commit b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()"). Fixes: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang Tested-by: Andy Shevchenko Signed-off-by: Andy Shevchenko Tested-by: Xu Yang Link: https://patch.msgid.link/20260611203537.1786399-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit b9363ea92f7c3f654f774a07171b6df2472e885e Author: Jonathan Cameron Date: Fri Sep 4 20:16:45 2026 -0400 device property: Add cleanup.h based fwnode_handle_put() scope based cleanup. [ Upstream commit 59ed5e2d505bf5f9b4af64d0021cd0c96aec1f7c ] Useful where the fwnode_handle was obtained from a call such as fwnode_find_reference() as it will safely do nothing if IS_ERR() is true and will automatically release the reference on the variable leaving scope. Reviewed-by: Andy Shevchenko Acked-by: Greg Kroah-Hartman Reviewed-by: Sakari Ailus Link: https://lore.kernel.org/r/20240217164249.921878-3-jic23@kernel.org Signed-off-by: Jonathan Cameron Stable-dep-of: 190069255582 ("device property: fix infinite loop in fwnode_for_each_child_node()") Signed-off-by: Sasha Levin commit 0d4cb3af82556afc48f90fd3e8a126ff32343f41 Author: Hyunwoo Kim Date: Fri Sep 4 07:09:42 2026 -0400 apparmor: fix out-of-bounds write when null terminating a label vec [ Upstream commit 9f1e40193eef7f047e6b77cfb4b4cafdecd7a123 ] aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE is passed. If the components are all distinct no duplicates are dropped, dups is 0 and the terminator goes to vec[n], so the caller has to provide room for n + 1 entries. aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len, gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it allocates exactly len pointers. The terminator therefore lands one entry past the end of the local array when len is LOCAL_VEC_ENTRIES, and one entry past the end of the allocation when len is larger. len comes from the number of "//&" separated components in the label name and label_count_strn_entries() does not bound it. An unprivileged task reaches the parse by writing to /proc/self/attr/apparmor/current or through lsm_set_self_attr(2), both of which go through do_setattr(), and the name is parsed before the change_profile permission is checked. The query_label() path behind the securityfs .access file, which is mode 0666, performs no permission check at all. Every component has to resolve to a loaded profile, so a system with policy loaded is required. The other two VEC_FLAG_TERMINATE users work on a label vec that aa_label_alloc() has already sized with "+ 1 for null terminator entry on vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of the local array and into kzalloc(). Fixes: f1bd904175e8 ("apparmor: add the base fns() for domain labels") Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim Signed-off-by: John Johansen [ replaced unavailable kzalloc_objs() with equivalent kcalloc() allocation ] Signed-off-by: Sasha Levin commit bc09411a11b5a676c59ff8612c6873d014f6fb36 Author: Jiayuan Chen Date: Tue Sep 1 07:39:45 2026 -0400 tls: device: fix out-of-bounds write in tls_append_frag() [ Upstream commit b17cf742eaad70ae29ac558cefb3aa9bbeea03d4 ] Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Cc: stable@vger.kernel.org Signed-off-by: Jiayuan Chen Link: https://patch.msgid.link/20260823084758.20936-1-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin