commit 738ac465e4e900d4a391a27da4e20c090eaa1e75 Author: Greg Kroah-Hartman Date: Sat Jul 4 13:38:41 2026 +0200 Linux 5.10.260 Link: https://lore.kernel.org/r/20260702155108.949633242@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Pavel Machek (CIP) Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 607a1d4c42f649e6197567c0448fd9ebb316cd42 Author: Miklos Szeredi Date: Thu Jun 25 13:56:09 2026 -0400 virtiofs: fix UAF on submount umount [ Upstream commit 06b41351779e9289e8785694ade9042ae85e41ea ] iput() called from fuse_release_end() can Oops if the super block has already been destroyed. Normally this is prevented by waiting for num_waiting to go down to zero before commencing with super block shutdown. This only works, however, for the last submount instance, as the wait counter is per connection, not per superblock. Revert to using synchronous release requests for the auto_submounts case, which is virtiofs only at this time. Reported-by: Aurélien Bombo Reported-by: Zhihao Cheng Cc: Greg Kurz Closes: https://github.com/kata-containers/kata-containers/issues/12589 Fixes: 26e5c67deb2e ("fuse: fix livelock in synchronous file put from fuseblk workers") Cc: stable@vger.kernel.org Reviewed-by: Greg Kurz Signed-off-by: Miklos Szeredi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d43afc412d439ffca1567e7ca8652be22f272b3b Author: Junrui Luo Date: Wed Jun 17 15:09:17 2026 -0400 misc: fastrpc: fix DMA address corruption due to find_vma misuse [ Upstream commit 464c6ad2aa16e1e1df9d559289199356493d1e00 ] fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided pointer and compute a DMA address offset. When the address falls in a gap before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows, corrupting the DMA address sent to the DSP. Replace find_vma() with vma_lookup(), which returns NULL when the address is not contained within any VMA. Cc: stable@vger.kernel.org Fixes: 80f3afd72bd4 ("misc: fastrpc: consider address offset before sending to DSP") Reported-by: Yuhao Jiang Signed-off-by: Junrui Luo Reviewed-by: Dmitry Baryshkov Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204528.116920-3-srini@kernel.org Signed-off-by: Greg Kroah-Hartman [ adapted `vma_lookup(mm, ptr)` to `find_vma(mm, ptr)` plus a `ptr >= vma->vm_start` guard since `vma_lookup()` does not exist in 5.10 ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 77fa80a1b7322e122122ce863a0b82d49cbd79c6 Author: Lad Prabhakar Date: Wed Jun 17 13:20:51 2026 -0400 mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC [ Upstream commit f48ee49726ee4ab545fd2dc644f169c0809b19b3 ] The RZ/G2H (R8A774E1) SoC was previously handled via the generic "renesas,rcar-gen3-sdhi" fallback compatible string. However, because the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it requires the specific quirks and configuration defined in `of_r8a7795_compatible` rather than the generic Gen3 data. Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly. Note that the DT binding file renesas,sdhi.yaml does not need an update as the entry for this SoC is already present. Fixes: 31941342888d ("arm64: dts: renesas: r8a774e1: Add SDHI nodes") Cc: stable@vger.kernel.org Signed-off-by: Lad Prabhakar Reviewed-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d59794337ea496042288c7c68356d9b9ca7f46a9 Author: Santosh Kalluri Date: Wed Jun 17 10:55:38 2026 -0400 net: phonet: free phonet_device after RCU grace period [ Upstream commit 71de0177b28da751f407581a4515cf4d762f6296 ] phonet_device_destroy() removes a phonet_device from the per-net device list with list_del_rcu(), but frees it immediately. RCU readers walking the same list can still hold a pointer to the object after it has been removed, leading to a slab-use-after-free. Use kfree_rcu(), matching the lifetime rule already used by phonet_address_del() for the same object type. Fixes: eeb74a9d45f7 ("Phonet: convert devices list to RCU") Cc: stable@vger.kernel.org Signed-off-by: Santosh Kalluri Acked-by: Rémi Denis-Courmont Reviewed-by: Simon Horman Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 35cca073eba23ed1439d47384e1dd4074ea17fc2 Author: Kuniyuki Iwashima Date: Wed Jun 17 10:55:37 2026 -0400 phonet: Pass net and ifindex to phonet_address_notify(). [ Upstream commit 68ed5c38b512b734caf3da1f87db4a99fcfe3002 ] Currently, phonet_address_notify() fetches netns and ifindex from dev. Once addr_doit() is converted to RCU, phonet_address_notify() will be called outside of RCU due to GFP_KERNEL, and dev will be unavailable there. Let's pass net and ifindex to phonet_address_notify(). Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni Stable-dep-of: 71de0177b28d ("net: phonet: free phonet_device after RCU grace period") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2a420e0dbad3f327f9bff72a3b214ab773a7f85a Author: Kuniyuki Iwashima Date: Wed Jun 17 10:55:36 2026 -0400 phonet: Pass ifindex to fill_addr(). [ Upstream commit 08a9572be36819b5d9011604edfa5db6c5062a7a ] We will convert addr_doit() and getaddr_dumpit() to RCU, both of which call fill_addr(). The former will call phonet_address_notify() outside of RCU due to GFP_KERNEL, so dev will not be available in fill_addr(). Let's pass ifindex directly to fill_addr(). Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Signed-off-by: Paolo Abeni Stable-dep-of: 71de0177b28d ("net: phonet: free phonet_device after RCU grace period") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 2023e82d58579220482a08867497499ca4953ecd Author: Dexuan Cui Date: Wed Jun 17 08:45:49 2026 -0400 Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs [ Upstream commit 016a25e4b0df4d77e7c258edee4aaf982e4ee809 ] If vmbus_reserve_fb() in the kdump/kexec kernel fails to properly reserve the framebuffer MMIO range (which is below 4GB) due to a Gen2 VM's screen.lfb_base being zero [1], there is an MMIO conflict between the drivers hyperv-drm and pci-hyperv: when the driver pci-hyperv's hv_allocate_config_window() calls vmbus_allocate_mmio() to get an MMIO range, typically it gets a 32-bit MMIO range that overlaps with the framebuffer MMIO range, and later hv_pci_enter_d0() fails with an error message "PCI Pass-through VSP failed D0 Entry with status" since the host thinks that PCI devices must not use MMIO space that the host has assigned to the framebuffer. This is especially an issue if pci-hyperv is built-in and hyperv-drm is built as a module. Consequently, the kdump/kexec kernel fails to detect PCI devices via pci-hyperv, and may fail to mount the root file system, which may reside in a NVMe disk. The issue described here has existed for SR-IOV VF NICs since day one of the pci-hyperv driver, and has been worked around on x64 when possible. With the recent introduction of ARM64 VMs that boot from NVMe, there is no workaround, so we need a formal fix. On Gen2 VMs, if the screen.lfb_base is 0 in the kdump/kexec kernel [1], fall back to the low MMIO base, which should be equal to the framebuffer MMIO base [2] (the statement is true according to my testing on x64 Windows Server 2016, and on x64 and ARM64 Windows Server 2025 and on Azure. I checked with the Hyper-V team and they said the statement should continue to be true for Gen2 VMs). In the first kernel, screen.lfb_base is not 0; if the user specifies a very high resolution, it's not enough to only reserve 8MB: let's always reserve half of the space below 4GB, but cap the reservation to 128MB, which is the required framebuffer size of the highest resolution 7680*4320 supported by Hyper-V. While at it, fix the comparison "end > VTPM_BASE_ADDRESS" by changing the > to >=. Here the 'end' is an inclusive end (typically, it's 0xFFFF_FFFF for the low MMIO range). Note: vmbus_reserve_fb() now also reserves an MMIO range at the beginning of the low MMIO range on CVMs, which have no framebuffers (the 'screen.lfb_base' in vmbus_reserve_fb() is 0 for CVMs), just in case the host might treat the beginning of the low MMIO range specially [3]. BTW, the OpenHCL kernel is not affected by the change, because that kernel boots with DeviceTree rather than ACPI (so vmbus_reserve_fb() won't run there), and there is no framebuffer device for that kernel. Note: normally Gen1 VMs don't have the MMIO conflict issue because the framebuffer MMIO range (which is hardcoded to base=4GB-128MB and size=64MB for Gen1 VMs by the host) is always reported via the legacy PCI graphics device's BAR, so the kdump/kexec kernel can reserve the 64MB MMIO range; however, if the VM is configured to use a very high resolution and the required framebuffer size exceeds 64MB (AFAIK, in practice, this isn't a typical configuration by users), the hyperv-drm driver may need to allocate an MMIO range above 4GB and change the framebuffer MMIO location to the allocated MMIO range -- in this case, there can still be issues [4] which can't be easily fixed: any possible affected Gen1 users would have to use a resolution whose framebuffer size is <= 64MB, or switch to Gen2 VMs. [1] https://lore.kernel.org/all/SA1PR21MB692176C1BC53BFC9EAE5CF8EBF51A@SA1PR21MB6921.namprd21.prod.outlook.com/ [2] https://lore.kernel.org/all/SA1PR21MB69218F955B62DFF62E3E88D2BF222@SA1PR21MB6921.namprd21.prod.outlook.com/ [3] https://lore.kernel.org/all/SN6PR02MB415726B17D5A6027CD1717E8D4342@SN6PR02MB4157.namprd02.prod.outlook.com/ [4] https://lore.kernel.org/all/SA1PR21MB69213486F821CA5A2C793C81BF342@SA1PR21MB6921.namprd21.prod.outlook.com/ Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") CC: stable@vger.kernel.org Reviewed-by: Michael Kelley Tested-by: Krister Johansen Tested-by: Matthew Ruffell Signed-off-by: Dexuan Cui Signed-off-by: Wei Liu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit a3d91218ccca1e990bfb737b5a6da23f0afba22b Author: Mukesh Ojha Date: Tue Jun 16 18:40:04 2026 -0400 misc: fastrpc: Fix NULL pointer dereference in rpmsg callback [ Upstream commit 5401fb4fe10fac6134c308495df18ed74aebb9c4 ] A NULL pointer dereference was observed on Hawi at boot when the DSP sends a glink message before fastrpc_rpmsg_probe() has completed initialization: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178 pc : _raw_spin_lock_irqsave+0x34/0x8c lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] ... Call trace: _raw_spin_lock_irqsave+0x34/0x8c (P) fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc] qcom_glink_native_rx+0x538/0x6a4 qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem] The faulting address 0x178 corresponds to the lock variable inside struct fastrpc_channel_ctx, confirming that cctx is NULL when fastrpc_rpmsg_callback() attempts to take the spinlock. There are two issues here. First, dev_set_drvdata() is called before spin_lock_init() and idr_init(), leaving a window where the callback can retrieve a valid cctx pointer but operate on an uninitialized spinlock. Second, the rpmsg channel becomes live as soon as the driver is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata() is called at all, resulting in dev_get_drvdata() returning NULL. Fix both issues by moving all cctx initialization ahead of dev_set_drvdata() so the structure is fully initialized before it becomes visible to the callback, and add a NULL check in fastrpc_rpmsg_callback() as a guard against any remaining window. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org Signed-off-by: Mukesh Ojha Reviewed-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204528.116920-4-srini@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 5ee32f221713dda4e59eeb95a4a191f5edd413d5 Author: Abel Vesa Date: Tue Jun 16 18:40:03 2026 -0400 misc: fastrpc: Add dma_mask to fastrpc_channel_ctx [ Upstream commit 9bde43a0e2f469961e18d0a3496a9a74379c22bf ] dma_set_mask_and_coherent only updates the mask to which the device dma_mask pointer points to. Add a dma_mask to the channel ctx and set the device dma_mask to point to that, otherwise the dma_set_mask will return an error and the dma_set_coherent_mask will be skipped too. Co-developed-by: Srinivas Kandagatla Signed-off-by: Abel Vesa Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20221125071405.148786-11-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 5401fb4fe10f ("misc: fastrpc: Fix NULL pointer dereference in rpmsg callback") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit da443a97abdb6d9d2f19788dd193c537eab3e328 Author: Paolo Abeni Date: Tue Jun 16 14:37:23 2026 -0400 mptcp: fix missing wakeups in edge scenarios [ Upstream commit 9d8d28738f24b75616d6ca7a27cb4aed88520343 ] The mptcp_recvmsg() can fill MPTCP socket receive queue via mptcp_move_skbs(), but currently does not try to wakeup any listener, because the same process is going to check the receive queue soon. When multiple threads are reading from the same fd, the above can cause stall. Add the missing wakeup. Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260602-net-mptcp-misc-fixes-7-1-rc7-v2-1-856831229976@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit d03c8363041befc2515c32d9636067081dc0914f Author: Thorsten Blum Date: Tue Jun 16 14:37:18 2026 -0400 hv: utils: handle and propagate errors in kvp_register [ Upstream commit 3fcf923302a8f5c0dc3af3d2ca2657cb5fae4297 ] Make kvp_register() return an error code instead of silently ignoring failures, and propagate the error from kvp_handle_handshake() instead of returning success. This propagates both kzalloc_obj() and hvutil_transport_send() failures to kvp_handle_handshake() and thus to kvp_on_msg(). Fixes: 245ba56a52a3 ("Staging: hv: Implement key/value pair (KVP)") Cc: stable@vger.kernel.org Signed-off-by: Thorsten Blum Reviewed-by: Long Li Signed-off-by: Wei Liu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 1449177b87f768353909e930a99b902675119b2b Author: Kyle Meyer Date: Tue Jun 16 11:55:38 2026 -0400 bnxt_en: Fix NULL pointer dereference [ Upstream commit d930276f2cddd0b7294cac7a8fe7b877f6d9e08d ] PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.") Cc: stable@vger.kernel.org Signed-off-by: Kyle Meyer Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 83613fe8ff0da7331036f1b2dca051cc36633579 Author: Michael Chan Date: Tue Jun 16 11:55:37 2026 -0400 bnxt_en: Modify bnxt_disable_int_sync() to be called more than once. [ Upstream commit 38290e37297087f7ea3ef7904b8f185d77c42976 ] In the event of a fatal firmware error, we want to disable IRQ early in the recovery sequence. This change will allow it to be called safely again as part of the normal shutdown sequence. Reviewed-by: Edwin Peer Reviewed-by: Vasundhara Volam Signed-off-by: Michael Chan Acked-by: Willem de Bruijn Signed-off-by: Jakub Kicinski Stable-dep-of: d930276f2cdd ("bnxt_en: Fix NULL pointer dereference") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman commit 3cf0580a09d417eab41ce914a11f9cde3a121871 Author: Yongchao Wu Date: Tue Mar 31 08:04:07 2026 +0800 usb: cdns3: gadget: fix NULL pointer dereference in ep_queue commit 7f6f127b9bc34bed35f56faf7ecb1561d6b39000 upstream. When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable Signed-off-by: Yongchao Wu Acked-by: Peter Chen Link: https://patch.msgid.link/20260331000407.613298-1-yongchao.wu@autochips.com Signed-off-by: Mikhail Dmitrichenko Signed-off-by: Greg Kroah-Hartman commit a1c41aebb184d9228a440dcb6761224e65b0e49a Author: Thadeu Lima de Souza Cascardo Date: Mon Feb 10 13:16:22 2025 -0600 dlm: prevent NPD when writing a positive value to event_done commit 8e2bad543eca5c25cd02cbc63d72557934d45f13 upstream. do_uevent returns the value written to event_done. In case it is a positive value, new_lockspace would undo all the work, and lockspace would not be set. __dlm_new_lockspace, however, would treat that positive value as a success due to commit 8511a2728ab8 ("dlm: fix use count with multiple joins"). Down the line, device_create_lockspace would pass that NULL lockspace to dlm_find_lockspace_local, leading to a NULL pointer dereference. Treating such positive values as successes prevents the problem. Given this has been broken for so long, this is unlikely to break userspace expectations. Fixes: 8511a2728ab8 ("dlm: fix use count with multiple joins") Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David Teigland Signed-off-by: Nazar Kalashnikov Signed-off-by: Greg Kroah-Hartman commit 73f4c5111c6f06fc9e6340c7768e161a5974af83 Author: Dominik Woźniak Date: Thu May 21 17:46:56 2026 +0200 nfsd: check get_user() return when reading princhashlen commit e186fa1c057f5eccb22afb1e83e34c0627085868 upstream. In __cld_pipe_inprogress_downcall(), the get_user() that reads princhashlen from the userspace cld_msg_v2 buffer does not check its return value. A failing copy leaves princhashlen with uninitialised stack contents, which are then used to drive memdup_user() and stored as princhash.len on the resulting reclaim record. The other get_user() calls in this function all check the return; only this one is missed, which is most likely a copy-paste oversight from when v2 upcalls were introduced. Mirror the existing pattern used a few lines above for namelen. namecopy is declared with __free(kfree) so the early return cleans up the already-allocated buffer automatically. Fixes: 6ee95d1c8991 ("nfsd: add support for upcall version 2") Cc: stable@vger.kernel.org Signed-off-by: Dominik Woźniak Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman commit b2eb1ffd511d1b3c3e21122f97cbbccea411e277 Author: Jeff Layton Date: Thu May 21 13:51:43 2026 -0400 nfsd: fix posix_acl leak on SETACL decode failure commit 0853ac544c590880d797b04daa33fcb72b6be0e1 upstream. nfsaclsvc_decode_setaclargs() and nfs3svc_decode_setaclargs() each call nfs_stream_decode_acl() twice, first for NFS_ACL and then for NFS_DFACL. Each successful call transfers ownership of a freshly allocated posix_acl into argp->acl_access or argp->acl_default. If the first call succeeds but the second fails, the decoder returns false and argp->acl_access is left dangling. ACLPROC2_SETACL.pc_release was wired to nfssvc_release_attrstat and ACLPROC3_SETACL.pc_release was wired to nfs3svc_release_fhandle. Both only call fh_put() and have no knowledge of the ACL fields on argp. The posix_acl_release() pairs sat at the out: labels inside nfsacld_proc_setacl() and nfsd3_proc_setacl(), but svc_process() skips pc_func when pc_decode returns false, so that cleanup is unreachable on decode failure: svc_process_common() pc_decode() /* decode_setaclargs: false */ /* pc_func skipped */ pc_release() /* fh_put only -- ACLs leaked */ The orphaned posix_acl is leaked for the lifetime of the server. Fix by adding nfsaclsvc_release_setacl() and nfs3svc_release_setacl(), which release both argp->acl_access and argp->acl_default in addition to fh_put(), and wiring them as pc_release for their respective SETACL procedures. pc_release runs on every path svc_process() takes after decode, including decode failure, so the posix_acl_release() pairs are removed from the proc functions' out: labels to keep ownership in one place. This matches the existing release_getacl() pattern used by the sibling GETACL procedures. Fixes: a257cdd0e217 ("[PATCH] NFSD: Add server support for NFSv3 ACLs.") Cc: stable@vger.kernel.org Assisted-by: kres:claude-opus-4-7 Signed-off-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman commit 8836405abdc53ca3dd5fc68b2cf6f8f012fad011 Author: Guannan Wang Date: Thu May 21 16:03:32 2026 +0800 NFSD: Fix SECINFO_NO_NAME decode error cleanup commit 9e18e83b8846a5c3fe13fc8a464b4865d33996c6 upstream. nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo(). Fixes: 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing") Cc: stable@vger.kernel.org Signed-off-by: Guannan Wang Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman commit 0680d85fba3be70746b36be4361609f5c65cb37b Author: Steffen Persvold Date: Fri Jun 12 18:40:41 2026 +0200 fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode commit d894c48a57d78206e4df9c90d4acfaf39394806a upstream. The 1920x1080@60 modedb entry has one too many initializers before its sync field: a stray "0" occupies the sync slot, which shifts the remaining values by one field. The entry therefore decodes as sync = 0, vmode = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT (0x3, i.e. FB_VMODE_INTERLACED | FB_VMODE_DOUBLE), and flag = FB_VMODE_NONINTERLACED, instead of the intended sync = positive H/V, vmode = non-interlaced. fb_find_mode() then returns a 1920x1080 mode flagged as interlaced + doublescan with active-low syncs. Drivers that honour var->vmode and var->sync when programming display timing enable doublescan and the wrong sync polarity, corrupting the output. Drop the stray initializer so sync and vmode hold their intended values (positive H/V sync, non-interlaced), matching the adjacent 1920x1200 entry. Fixes: c8902258b2b8 ("fbdev: modedb: Add 1920x1080 at 60 Hz video mode") Cc: stable@vger.kernel.org Signed-off-by: Steffen Persvold Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 1458a4d804550b7101e8bb02c1cb941088e4c0c7 Author: Ian Bridges Date: Wed Jun 24 23:13:12 2026 -0500 fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var commit 7f08fc10fa3d3366dc3af723970bd03d7d6d10e3 upstream. info->var, a framebuffer's current mode, is expected to have a matching entry in info->modelist. var_to_display() relies on this and treats a failed fb_match_mode() as "This should not happen". fb_set_var() keeps it true by adding the mode to the list on every change, and do_register_framebuffer() does the same at registration. store_modes() replaces the modelist from userspace. fb_new_modelist() validates the new modes but does not check that info->var still has a match. It relies on fbcon_new_modelist() to re-point consoles, but that only handles consoles mapped to the framebuffer. With fbcon unbound there are none, so info->var is left describing a mode that is no longer in the list. A later console takeover runs var_to_display(), where fb_match_mode() returns NULL and leaves fb_display[i].mode NULL. fbcon_switch() passes it to display_to_var(), and fb_videomode_to_var() dereferences the NULL mode. Keep the current mode in the list in fb_new_modelist(), the same way fb_set_var() does. Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: Ian Bridges Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit f701ae476cb92a3a3d8844bb39bb63b4512684c8 Author: Ashutosh Desai Date: Fri May 1 13:35:32 2026 -0700 KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path commit 78ee2d50185a037b3d2452a97f3dad69c3f7f389 upstream. In sev_dbg_crypt(), the per-iteration transfer length is bounded by the source page offset (PAGE_SIZE - s_off) but not by the destination page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt path (__sev_dbg_encrypt_user) performs a read-modify-write using a single-page intermediate buffer (dst_tpage): 1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16) before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE, the PSP writes beyond the end of the 4096-byte dst_tpage allocation. 2. The subsequent memcpy()/copy_from_user() into page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows by up to 15 bytes under the same condition. Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE - the PSP is instructed to write round_up(4097, 16) = 4112 bytes to a 4096-byte buffer. Fix by also bounding len by (PAGE_SIZE - d_off), the same check that sev_send_update_data() already performs for its single-page guest region. ================================================================== BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd] Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214 CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY Tainted: [U]=USER, [W]=WARN Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025 Call Trace: dump_stack_lvl+0x54/0x70 print_report+0xbc/0x260 kasan_report+0xa2/0xd0 kasan_check_range+0x25f/0x2c0 __asan_memcpy+0x40/0x70 sev_dbg_crypt+0x993/0xd10 [kvm_amd] sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd] kvm_vm_ioctl+0x65d/0x6d0 [kvm] __se_sys_ioctl+0xb2/0x100 do_syscall_64+0xe8/0x870 entry_SYSCALL_64_after_hwframe+0x4b/0x53 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb memcg:ff11000112827d82 flags: 0x1400000000000000(node=1|zone=1) raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000 raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82 page dumped because: kasan: bad access detected Memory state around the buggy address: ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== Disabling lock debugging due to kernel taint Fixes: 24f41fb23a39 ("KVM: SVM: Add support for SEV DEBUG_DECRYPT command") Fixes: 7d1594f5d94b ("KVM: SVM: Add support for SEV DEBUG_ENCRYPT command") Cc: stable@vger.kernel.org Signed-off-by: Ashutosh Desai [sean: add sample KASAN splat, Fixes, and stable@] Link: https://patch.msgid.link/20260501203537.2120074-2-seanjc@google.com Signed-off-by: Sean Christopherson Signed-off-by: Greg Kroah-Hartman commit 336340a0f8a141df8a4eb21a5a86f8ffb87769f6 Author: Zhang Cen Date: Sun May 24 19:12:48 2026 +0800 ocfs2: reject oversized group bitmap descriptors commit 9bd541e09dffff27e5bec0f9f45b0228173a5375 upstream. ocfs2_validate_gd_parent() only bounds bg_bits against the parent allocator's chain geometry. A malicious descriptor can still claim a bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in the group descriptor block, so later bitmap scans and bit updates can run past bg_bitmap. Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent allocator type and reject descriptors whose bg_size or bg_bits exceed that capacity. Keep the existing chain geometry check so both the on-disk bitmap layout and the allocator metadata must agree before the descriptor is used. Validation reproduced this kernel report: KASAN use-after-free in _find_next_bit+0x7f/0xc0 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) _find_next_bit+0x7f/0xc0 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375) ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457) ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86) ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786) ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886) get_page_from_freelist+0x70e/0x2370 (?:?) lock_release+0xc6/0x290 (?:?) do_raw_spin_unlock+0x9a/0x100 (?:?) kasan_unpoison+0x27/0x60 (?:?) __bfs+0x147/0x240 (?:?) get_page_from_freelist+0x83d/0x2370 (?:?) ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96) sched_domains_numa_masks_clear+0x70/0xd0 (?:?) check_irq_usage+0xe8/0xb70 (?:?) __ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497) check_path+0x24/0x50 (?:?) rcu_is_watching+0x20/0x50 (?:?) check_prev_add+0xfd/0xd00 (?:?) ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?) __folio_batch_add_and_move+0x1f5/0x3d0 (?:?) ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?) filemap_add_folio+0x105/0x1f0 (?:?) ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043) ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?) down_write+0xf5/0x180 (?:?) ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?) __mark_inode_dirty+0x758/0x9a0 (?:?) inode_to_bdi+0x41/0x90 (?:?) balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?) generic_perform_write+0x252/0x440 (?:?) mnt_put_write_access_file+0x16/0x70 (?:?) file_update_time_flags+0xe4/0x200 (?:?) ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?) lock_acquire+0x184/0x2f0 (?:?) ksys_write+0xd2/0x170 (?:?) apparmor_file_permission+0xf5/0x310 (?:?) read_zero+0x8d/0x140 (?:?) lock_is_held_type+0x8f/0x100 (?:?) Link: https://lore.kernel.org/20260524111248.1429884-1-rollkingzzc@gmail.com Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Jun Piao Cc: Heming Zhao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit e918942bcc5355ad5b44ba557935dffc0727b0eb Author: Wentao Liang Date: Wed Apr 8 15:45:34 2026 +0000 fpga: region: fix use-after-free in child_regions_with_firmware() commit 54f3c5643ec523a04b6ec0e7c19eb10f5ebebdd3 upstream. Move of_node_put(child_region) after the error print to avoid accessing freed memory when pr_err() references child_region. Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang [ Yilun: Fix the Fixes tag ] Reviewed-by: Xu Yilun Link: https://lore.kernel.org/r/20260408154534.404327-1-vulab@iscas.ac.cn Signed-off-by: Xu Yilun Signed-off-by: Greg Kroah-Hartman commit 8176773dfceae7978b01c20b233693e072053700 Author: Qingshuang Fu Date: Thu Jun 18 10:13:52 2026 +0800 irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove commit 37738fdf2ab1e504d1c63ce5bc0aeb6452d8f057 upstream. The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove() Fixes: b6ef9161e43a ("irq-imgpdc: add ImgTec PDC irqchip driver") Signed-off-by: Qingshuang Fu Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260618021352.661773-1-fffsqian@163.com Signed-off-by: Greg Kroah-Hartman commit 4ad8b9a85dbf57ca532ee9e65ad7e6498bfbbf98 Author: Wentao Liang Date: Mon May 18 13:10:36 2026 +0000 pNFS: Fix use-after-free in pnfs_update_layout() commit 13e198a90ca4050f4bee8a3f23680389a6563ccc upstream. When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(), the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds, pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(), which still references 'lo'. This results in a use-after-free when the tracepoint accesses lo's fields. Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). Fixes: 2c8d5fc37fe2 ("pNFS: Stricter ordering of layoutget and layoutreturn") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman commit 171d31245d11bf84836fad3b394cb465a4d008ec Author: Doruk Tan Ozturk Date: Wed Jun 17 09:58:18 2026 +0200 tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done commit bda3348872a2ef0d19f2df6aa8cb5025adce2f20 upstream. tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to crypto_aead_decrypt(req) without taking a reference on the netns, unlike the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously (e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the per-netns tipc_crypto, and the completion then reads it: tipc_aead_decrypt_done() dereferences aead->crypto->stats and aead->crypto->net, and tipc_crypto_rcv_complete() dereferences aead->crypto->aead[] and the node table -- reading freed memory. Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO): BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999) Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51 Workqueue: events_unbound Call Trace: tipc_aead_decrypt_done (net/tipc/crypto.c:999) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 169: __kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415) tipc_crypto_start (net/tipc/crypto.c:1502) tipc_init_net (net/tipc/core.c:72) ops_init (net/core/net_namespace.c:137) setup_net (net/core/net_namespace.c:446) copy_net_ns (net/core/net_namespace.c:579) create_new_namespaces (kernel/nsproxy.c:132) __x64_sys_unshare (kernel/fork.c:3316) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Freed by task 8: kfree (mm/slub.c:6566) tipc_exit_net (net/tipc/core.c:119) cleanup_net (net/core/net_namespace.c:704) process_one_work (kernel/workqueue.c:3314) kthread (kernel/kthread.c:436) This is the same class of bug that commit e279024617134 ("net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt side. The encrypt path takes maybe_get_net(aead->crypto->net) before crypto_aead_encrypt() and drops it with put_net() on the synchronous return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY return keeps the reference for the async callback to release. The decrypt path was left without the equivalent guard. Mirror the encrypt-side fix on the decrypt path: take a net reference before crypto_aead_decrypt() (failing with -ENODEV and the matching bearer put if it cannot be acquired), keep it across the -EINPROGRESS/-EBUSY async return, and drop it with put_net() on the synchronous success/error return and at the end of tipc_aead_decrypt_done(). Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is flooded with crafted encrypted frames from an unknown peer (driving the cluster-key decrypt path) while the bearer's netns is repeatedly torn down. The completion must run asynchronously to outlive tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts synchronously, so the async path was exercised via cryptd offload. The unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the unpatched upstream path; tipc_aead_decrypt() still lacks maybe_get_net(aead->crypto->net), so the completion can outlive the free on any config where crypto_aead_decrypt() goes async. Found by 0sec automated security-research tooling (https://0sec.ai). Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Cc: stable@vger.kernel.org Signed-off-by: Doruk Tan Ozturk Reviewed-by: Alexander Lobakin Reviewed-by: Tung Nguyen Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260617075818.37431-1-doruk@0sec.ai Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit e6f1a11cfb808441a43ffae9b476cc135732cd27 Author: Michael Bommarito Date: Wed Apr 22 11:58:44 2026 -0400 exfat: fix potential use-after-free in exfat_find_dir_entry() commit 3f5f8ee9917cc2b9076ac533492d8a200edcabb8 upstream. In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. Fixes: ca06197382bd ("exfat: add directory operations") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Namjae Jeon Signed-off-by: Greg Kroah-Hartman commit 9e22b6fc6532cd566dad6d89d8fb3885248e364a Author: Maciej W. Rozycki Date: Wed May 6 23:42:27 2026 +0100 MIPS: DEC: Prevent initial console buffer from landing in XKPHYS commit 7fb13fd35110ebe95eb053faf79d018f51144d85 upstream. In 64-bit configurations calling the initial console output handler from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment and consequently so has been the buffer allocated there that is used as the argument corresponding to the `%s' output conversion specifier for the firmware's printf() entry point. This 64-bit address will then be truncated by 32-bit firmware, resulting in an attempt to access the wrong memory location, which in turn will cause all kinds of unpredictable behaviour, such as a kernel crash: Console: colour dummy device 160x64 Calibrating delay loop... 49.36 BogoMIPS (lpj=192512) pid_max: default: 32768 minimum: 301 CPU 0 Unable to handle kernel paging request at virtual address 000000000203bd00, epc == ffffffffbfc08364, ra == ffffffffbfc08800 Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 5.18.0-rc2-00254-gfb649bda6f56-dirty #121 $ 0 : 0000000000000000 0000000000000001 0000000000000023 ffffffff80684ba0 $ 4 : 000000000203bd00 ffffffffbfc0f3b4 ffffffffffffffff 0000000000000073 $ 8 : 0a303d7469000000 0000000000000000 0000000000000073 ffffffffbfc0f473 $12 : 0000000000000002 0000000000000000 ffffffff80684c1c 0000000000000000 $16 : 0000000000000000 ffffffff80596dc9 0000000000000000 ffffffffbfc09240 $20 : ffffffff80684c40 ffffffffbfc0f400 000000000000002d 000000000000002b $24 : ffffffffffffffbf 000000000203bd00 $28 : ffffffff805f0000 ffffffff80684b58 0000000000000030 ffffffffbfc08800 Hi : 0000000000000000 Lo : 0000000000000aa8 epc : ffffffffbfc08364 0xffffffffbfc08364 ra : ffffffffbfc08800 0xffffffffbfc08800 Status: 140120e2 KX SX UX KERNEL EXL Cause : 00000008 (ExcCode 02) BadVA : 000000000203bd00 PrId : 00000430 (R4000SC) Modules linked in: Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000000 0000004d0000004d 80684cc0806a2a40 80596dc80000004d 8061000000000000 bfc0850c80684c38 0000000000000000 000000000203bd00 0000000000000000 0000000000000000 0000000000000000 00000000bfc0f3b4 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000002500000000 0000000000000000 0000000000000000 802c1a7400000000 0203bd0080596dc8 0203bd4d69000000 6c61632000000018 5f746567646e6172 6c616320625f6d6f 5f736e5f6d6f7266 206361323778302b 303d74696e726320 806a0a38806b0000 806a0a38806b0000 00000000806b0000 80683c58806b0000 ... Call Trace: Code: a082ffff 03e00008 00601021 <80820000> 00001821 10400005 24840001 80820000 24630001 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception in interrupt KN04 V2.1k (PC: 0xa0026768, SP: 0x806848e8) >> In this case the pointer in $4 was truncated from 0x980000000203bd00 to 0x000000000203bd00. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started. Fix the issue by making the buffer static and initdata, and therefore placed in the CKSEG0 32-bit compatibility segment, observing that the console output handler is called with the console lock held, implying no need for this code to be reentrant. Add an assertion to verify the buffer actually has been placed in a compatibility segment. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej W. Rozycki Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit d0a81ed5ff5d0f9c3f63a4f9e5a4642c363ecd3e Author: Dawei Feng Date: Wed Jun 3 18:53:16 2026 +0800 bpf: use kvfree() for replaced sysctl write buffer commit 4c21b5927d4364bfe7365f2700da5fea0ed0d004 upstream. proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports. Fixes: 4508943794ef ("proc: use kvzalloc for our kernel buffer") Cc: stable@vger.kernel.org Reviewed-by: Emil Tsalapatis Reviewed-by: Jiayuan Chen Acked-by: Yonghong Song Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://lore.kernel.org/r/20260603105317.944304-3-dawei.feng@seu.edu.cn Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman commit 733cd8474e6d763d75ed96f3f2b98a25480cf2b9 Author: Zhang Cen Date: Mon Jun 15 15:19:54 2026 +0800 f2fs: validate ACL entry sizes in f2fs_acl_from_disk() commit c4810ada31e80cbe4011467c4f3b1e93f94134f3 upstream. f2fs_acl_count() only validates the aggregate ACL xattr length. A malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk() then reads entry->e_id before verifying that a full entry fits. Require a short entry before reading e_tag and e_perm, and require a full entry before reading e_id for ACL_USER and ACL_GROUP. Return -EFSCORRUPTED from these new truncated-entry checks, while keeping the pre-existing -EINVAL paths unchanged. Validation reproduced this kernel report: KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0 RIP: 0033:0x7f4b835ea7aa The buggy address belongs to the object at ffff888114589960 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888114589960, ffff888114589968) Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) __f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x224/0x430 (?:?) kasan_report+0xe0/0x110 (?:?) __f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169) __get_acl+0x281/0x380 (?:?) vfs_get_acl+0x10b/0x190 (?:?) do_get_acl+0x2a/0x410 (?:?) do_get_acl+0x9/0x410 (?:?) do_getxattr+0xe8/0x260 (?:?) filename_getxattr+0xd1/0x140 (?:?) do_getname+0x2d/0x2d0 (?:?) path_getxattrat+0x16c/0x200 (?:?) lock_release+0xc8/0x290 (?:?) cgroup_update_frozen+0x9d/0x320 (?:?) lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?) trace_hardirqs_on+0x1a/0x170 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Cc: stable@kernel.org Fixes: af48b85b8cd3 ("f2fs: add xattr and acl functionalities") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman commit a70ae4a350665756bd1bb94417c3e5e4cefcfdfd Author: Bitterblue Smith Date: Sat Apr 25 22:32:58 2026 +0300 wifi: rtlwifi: rtl8821ae: Fix C2H bit location in RX descriptor commit 83d38df6929118c3f996b9e3351c2d5014073d87 upstream. Bit 28 of double word 2 in the RX descriptor indicates if the packet is a normal 802.11 frame, or a message from the wifi firmware to the driver (Card 2 Host). Commit f5678bfe1cdc ("rtlwifi: rtl8821ae: Replace local bit manipulation macros") mistakenly made the driver look for this bit in double word 1, causing packet loss and Bluetooth coexistence problems. Fixes: f5678bfe1cdc ("rtlwifi: rtl8821ae: Replace local bit manipulation macros") Cc: Signed-off-by: Bitterblue Smith Acked-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/04da7398-cedb-425a-a810-5772ab10139d@gmail.com Signed-off-by: Greg Kroah-Hartman commit e569a5cb401a267168621aa9a1e7f07fcc9612c3 Author: Jose Ignacio Tornos Martinez Date: Mon Apr 20 13:01:29 2026 +0200 wifi: ath11k: fix warning when unbinding commit 8b7a26b6681922a38cd5a7829ace61f8e54df9b7 upstream. If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Cc: stable@vger.kernel.org Signed-off-by: Jose Ignacio Tornos Martinez Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260420110130.509670-1-jtornosm@redhat.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman commit 21b3685f25809de094bb96cf3c0052534eb94fbc Author: Zenm Chen Date: Tue Apr 7 23:44:30 2026 +0800 wifi: mt76: mt76x2u: Add support for ELECOM WDC-867SU3S commit f4ce0664e9f0387873b181777891741c33e19465 upstream. Add the ID 056e:400a to the table to support an additional MT7612U adapter: ELECOM WDC-867SU3S. Compile tested only. Cc: stable@vger.kernel.org # 5.10.x Signed-off-by: Zenm Chen Acked-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260407154430.9184-1-zenmchen@gmail.com Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman commit d8274181b0f28d450b42489723a5ba81042158d7 Author: Shaomin Chen Date: Wed Jun 10 13:10:05 2026 +0300 keys: Pin request_key_auth payload in instantiate paths commit fd15b457a86939c38aa12116adabd8ff686c5e51 upstream. A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] Cc: stable@vger.kernel.org # v5.10+ Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys") Reported-by: Shaomin Chen Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com Signed-off-by: Shaomin Chen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 622ec2dcd59f21623f2a7ab773c80ceb7d555e3a Author: Jarkko Sakkinen Date: Mon Jun 1 23:11:54 2026 +0300 KEYS: fix overflow in keyctl_pkey_params_get_2() commit cb481e59ea6cae3b7796ac1d7a22b6b24c3f3c0b upstream. The length for the internal output buffer is calculated incorrectly, which can result overflow when a too small buffer is provided. Fix the bug by allocating internal output with the size of the maximum length of the cryptographic primitive instead of caller provided size. Link: https://lore.kernel.org/keyrings/20260531024914.3712130-1-jarkko@kernel.org/ Cc: stable@vger.kernel.org # v4.20+ Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Reported-by: Alessandro Groppo Tested-by: Alessandro Groppo Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman commit 3a2b378b3a9ca75d3518d879148d2ad25b5714a9 Author: Doruk Tan Ozturk Date: Tue May 26 20:37:26 2026 +0200 mac802154: llsec: add skb_cow_data() before in-place crypto commit 84a04eb5b210643bd67aab81ff805d32f62aa865 upstream. llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis. Fixes: 4c14a2fb5d14 ("mac802154: add llsec decryption method") Fixes: 03556e4d0dbb ("mac802154: add llsec encryption method") Cc: stable@vger.kernel.org Reported-by: Doruk Tan Ozturk Closes: https://lore.kernel.org/linux-wpan/20260525161806.96158-1-doruk@0sec.ai/ Reviewed-by: Alexander Lobakin Signed-off-by: Doruk Tan Ozturk Closes: Link: https://lore.kernel.org/20260526183726.56100-1-doruk@0sec.ai Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit da8e1623a3028e1d8c75eec7898d94c6f17dce40 Author: Kevin Hao Date: Tue Jun 30 23:07:17 2026 +0300 net: cpsw_new: Fix potential unregister of netdev that has not been registered yet commit 9d724b34fbe13b71865ad0906a4be97571f19cf5 upstream. If an error occurs during register_netdev() for the first MAC in cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL, cpsw->slaves[1].ndev would remain unchanged. This could later cause cpsw_unregister_ports() to attempt unregistering the second MAC. To address this, add a check for ndev->reg_state before calling unregister_netdev(). With this change, setting cpsw->slaves[i].ndev to NULL becomes unnecessary and can be removed accordingly. Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Kevin Hao Cc: stable@vger.kernel.org Reviewed-by: Alexander Sverdlin Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-2-6e58bae6b299@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Wenshan Lan Signed-off-by: Sasha Levin Signed-off-by: Elizaveta Tereshkina Signed-off-by: Sasha Levin commit 28f6f37abca7c5c9eb3959c66310f1d4d98b8aaf Author: Herbert Xu Date: Wed Jul 1 19:01:21 2026 +0300 crypto: af_alg - Set merge to zero early in af_alg_sendmsg commit 9574b2330dbd2b5459b74d3b5e9619d39299fc6f upstream. If an error causes af_alg_sendmsg to abort, ctx->merge may contain a garbage value from the previous loop. This may then trigger a crash on the next entry into af_alg_sendmsg when it attempts to do a merge that can't be done. Fix this by setting ctx->merge to zero near the start of the loop. Fixes: 8ff590903d5 ("crypto: algif_skcipher - User-space interface for skcipher operations") Reported-by: Muhammad Alifa Ramdhan Reported-by: Bing-Jhong Billy Jheng Signed-off-by: Herbert Xu Signed-off-by: Mikhail Dmitrichenko Signed-off-by: Sasha Levin commit 3462a3f0716d27af51896dc8688bcf0628fb17ee Author: Yuto Ohnuki Date: Tue Jun 30 17:42:56 2026 +0100 ext4: add bounds check for inline data length in ext4_read_inline_page [ Upstream commit 356227096eb66e41b23caf7045e6304877322edf ] ext4_read_inline_page() does not validate that the inline data length fits within a page before copying data. If the inline size exceeds PAGE_SIZE due to filesystem corruption, this could lead to a kernel memory write beyond the page boundary. Add a bounds check after computing len, returning -EFSCORRUPTED if the value exceeds PAGE_SIZE. The upstream commit replaced a BUG_ON(len > PAGE_SIZE) in ext4_read_inline_folio(). In 6.1 and earlier, the function is still named ext4_read_inline_page() and the BUG_ON was never present, so this patch adds the bounds check directly. Fixes: 46c7f254543d ("ext4: add read support for inline data") Signed-off-by: Yuto Ohnuki Signed-off-by: Sasha Levin commit a1250962bacb667976877c08a2044ec7dc708353 Author: Bjoern Doebel Date: Tue Jun 30 06:06:34 2026 +0000 ring-buffer: Remove ring_buffer_read_prepare_sync() [ Upstream commit 119a5d573622ae90ba730d18acfae9bb75d77b9a ] When the ring buffer was first introduced, reading the non-consuming "trace" file required disabling the writing of the ring buffer. To make sure the writing was fully disabled before iterating the buffer with a non-consuming read, it would set the disable flag of the buffer and then call an RCU synchronization to make sure all the buffers were synchronized. The function ring_buffer_read_start() originally would initialize the iterator and call an RCU synchronization, but this was for each individual per CPU buffer where this would get called many times on a machine with many CPUs before the trace file could be read. The commit 72c9ddfd4c5bf ("ring-buffer: Make non-consuming read less expensive with lots of cpus.") separated ring_buffer_read_start into ring_buffer_read_prepare(), ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of the per CPU buffers to be prepared, call the read_buffer_read_sync() once, and then the ring_buffer_read_start() for each of the CPUs which made things much faster. The commit 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator") removed the requirement of disabling the recording of the ring buffer in order to iterate it, but it did not remove the synchronization that was happening that was required to wait for all the buffers to have no more writers. It's now OK for the buffers to have writers and no synchronization is needed. Remove the synchronization and put back the interface for the ring buffer iterator back before commit 72c9ddfd4c5bf was applied. Cc: Mathieu Desnoyers Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home Reported-by: David Howells Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator") Tested-by: David Howells Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Assisted-by: Kiro:claude-opus-4.8 [doebel@amazon.de: move patch section using guard() macro into a separate block to address declaration after statement warning.] Signed-off-by: Bjoern Doebel Signed-off-by: Sasha Levin commit 41ad4a5649a2c6527a0c7d62907f2f24fde48b87 Author: Sven Eckelmann Date: Fri Jun 26 18:09:52 2026 +0200 batman-adv: tvlv: avoid race of cifsnotfound handler state commit edb557b2ba38fea2c5eb710cf366c797e187218c upstream. TVLV handlers can have the flag BATADV_TVLV_HANDLER_OGM_CIFNOTFND set to signal that the OGM handler should be called (with NULL for data) when the specific TVLV container was not found in the OGM. This is used by: * DAT * GW * Multicast (OGM + Tracker) The state whether the handler was executed was stored in the struct batadv_tvlv_handler. But the TVLV processing is started without any lock. Multiple parallel contexts processing TVLVs would therefore overwrite each others BATADV_TVLV_HANDLER_OGM_CALLED flag in the shared batadv_tvlv_handler. Drop the shared BATADV_TVLV_HANDLER_OGM_CALLED flag and instead determine, per TVLV buffer, whether a matching container was present by scanning the packet's buffer. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 0cc691a7737bb2d5284bbe8c1a00dd7068e4cc00 Author: Sven Eckelmann Date: Fri Jun 26 18:09:51 2026 +0200 batman-adv: tvlv: enforce 2-byte alignment commit 32a6799255525d6ea4da0f7e9e0e521ad9560a46 upstream. The fields of an aggregated OGM(v2) are accessed assuming (at least) 2-byte alignment, so a following OGM must start at an even offset. As the header length is even, an odd tvlv_len would misalign it and trigger unaligned accesses on strict-alignment architectures. Such a misaligned TVLV/OGM/OGMv2 is not created by a normal participant in the mesh. Therefore, reject such malformed packets. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") [ Drop change for non-existing mcast handling ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit d648f74a1e331ac2529de485d1d74b142a5c65bb Author: Sven Eckelmann Date: Fri Jun 26 18:09:50 2026 +0200 batman-adv: dat: prevent false sharing between VLANs commit 20d7658b74169f86d4ac01b9185b3eadddf71f28 upstream. The local hash of DAT entries is supposed to be VLAN (VID) aware. But the adding to the hash and the search in the hash were not checking the VID information of the hash entries. The entries would therefore only be correctly separated when batadv_hash_dat() didn't select the same buckets for different VIDs. Cc: stable@kernel.org Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 386bcbea608828ca02f92d4508a7e3f8f1833f74 Author: Sven Eckelmann Date: Fri Jun 26 18:09:49 2026 +0200 batman-adv: tt: track roam count per VID commit 12407d5f61c2653a64f2ff4b22f3c267f8420ef1 upstream. batadv_tt_check_roam_count() is supposed to track roaming of a TT entry. But TT entries are for a MAC + VID. The VID was completely missed and thus leads to incorrect detection of ROAM counts when a client MAC exists in multiple VLANs. Cc: stable@kernel.org Fixes: c018ad3de61a ("batman-adv: add the VLAN ID attribute to the TT entry") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit f59e5cf1af76c156b8dfb37192c19c603fd704e9 Author: Sven Eckelmann Date: Fri Jun 26 18:09:48 2026 +0200 batman-adv: tt: don't merge change entries with different VIDs commit f08e06c2d5c3e2434e7c773f2213f4a7dce6bc1e upstream. batadv_tt_local_event() merges/cancels events for the same client which would conflict or be duplicates. The matching of the queued events only compares the MAC address - the VLAN ID stored in each event is ignored. If a MAC would now appear on multiple VID, the two ADD change events (for VID 1 and VID 2) would be merged to a single vid event. The remote can therefore not calculate the correct TT table and desync. A full translation table exchange is required to recover from this state. A check of VID is therefore necessary to avoid such wrong merges/cancels. Cc: stable@kernel.org Fixes: c018ad3de61a ("batman-adv: add the VLAN ID attribute to the TT entry") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 0ded98943634f25ef5063aff7976432be0a72eab Author: Sven Eckelmann Date: Fri Jun 26 18:09:47 2026 +0200 batman-adv: tp_meter: handle overlapping packets commit cbde75c38b21f022891525078622587ad557b7c1 upstream. If the size of the packets would change during the transmission, it could happen that some retries of packets are overlapping. In this case, precise comparisons of sequence numbers by the receiver would be wrong. It is then necessary to check if the start sequence number to the end sequence number ("seqno + length") would contain a new range. If this is the case then this is enough to accept this packet. In all other cases, the packet still has to be dropped (and not acked). Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") [ Switch to pre-splitted tp_vars structure names ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit f44491bcef2cae5054590c07ae9aa47015e17c27 Author: Sven Eckelmann Date: Fri Jun 26 18:09:46 2026 +0200 batman-adv: tp_meter: prevent parallel modifications of last_recv commit 6dde0cfcb36e4d5b3de35b75696937478441eed4 upstream. When last_recv is updated to store the last receive sequence number, it is assuming that nothing is modifying in parallel while: * check for outdated packets is done * out of order check is performed (and packets are stored in out-of-order queue) * the out-of-order queue was searched for closed gaps * sequence number for next ack is calculated Nothing of that was actually protected. It could therefore happen that the last_recv was updated multiple times in parallel and the final sequence number was calculated with deltas which had no connection to the sequence number they were added to. Lock this whole region with the same lock which was already used to protect the unacked (out-of-order) list. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") [ Switch to pre-splitted tp_vars structure names ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit c4f795a1ebea9fe27f435b4b2e19e61a937f613b Author: Sven Eckelmann Date: Fri Jun 26 18:09:45 2026 +0200 batman-adv: tp_meter: annotate last_recv_time access with READ/WRITE_ONCE commit d67c728f07fca2ee6ffdc6dd4421cf2e8691f4d1 upstream. The last_recv_time field for batadv_tp_receiver tracks the jiffies value of the most recent activity and is used to detect timeouts. These accesses are not consistently protected by a lock, so READ_ONCE/WRITE_ONCE must be used to prevent data races caused by compiler optimizations. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 31a88792bfba142be3c9521538c1db805677381f Author: Sven Eckelmann Date: Fri Jun 26 18:09:44 2026 +0200 batman-adv: tp_meter: restrict number of unacked list entries commit e7c775110e1858e5a7471a23a9c9658c0af9df89 upstream. When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered(). Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") [ Switch to pre-splitted tp_vars structure names ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit d462ced79dd430200cf888984e8005da77fc810b Author: Sven Eckelmann Date: Fri Jun 26 18:09:43 2026 +0200 batman-adv: v: prevent OGM aggregation on disabled hardif commit d11c00b95b2a3b3934007fc003dccc6fdcc061ad upstream. When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs. Cc: stable@kernel.org Fixes: f89255a02f1d ("batman-adv: BATMAN_V: introduce per hard-iface OGMv2 queues") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 29f92da98fa8e176af5162f8e41b7064fec4c7b1 Author: Sven Eckelmann Date: Fri Jun 26 18:09:42 2026 +0200 batman-adv: frag: avoid underflow of TTL commit 493d9d2528e1a09b090e4b37f0f553def7bd5ce9 upstream. Packets with a TTL are using it to limit the amount of time this packet can be forwarded. But for batadv_frag_packet, the TTL was always only reduced but it was never evaluated. It could even underflow without any effect. Check the TTL in batadv_frag_skb_fwd() before attempting to prepare it for forwarding. This keeps it in sync with the not fragmented unicast packet. Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit f93158d86064021da134a744c6afc9703088a35b Author: Sven Eckelmann Date: Fri Jun 26 18:09:41 2026 +0200 batman-adv: frag: ensure fragment is writable before modifying TTL commit b7293c6e8c15b2db77809b25cf8389e35331b27a upstream. Before batman-adv is allowed to write to an skb, it either has to have its own copy of the skb or use skb_cow() to ensure that the data part is not shared. But batadv_frag_skb_fwd() modifies the TTL even when it is shared. Adding a skb_cow() right before this operation avoids this and can at the same time prepare it for the modifications required to forward the fragment. Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 2cab2acac42ae2c8755623fb647a005ee4a7c46e Author: Sven Eckelmann Date: Fri Jun 26 18:09:40 2026 +0200 batman-adv: tp_meter: initialize last_recv_time during init commit 811cb00fa8cdc3f0a7f6eefc000a6888367c8c8f upstream. The last_recv_time is the most important indicator for a receiver session to figure out whether a session timed out or not. But this information was only initialized after the session was added to the tp_receiver_list and after the timer was started. In the worst case, the timer (function) could have tried to access this information before the actual initialization was reached. Like rest of the variables of the tp_meter receiver session, this field has to be filled out before any other (parallel running) context has the chance to access it. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 9bd9d7bbf13d04c92c43ee081580b14fa3cbf732 Author: Sven Eckelmann Date: Fri Jun 26 18:09:39 2026 +0200 batman-adv: prevent ELP transmission interval underflow commit 5e50d4b8ae3ea622122d3c6a38d7f6fe68dfddca upstream. batadv_v_elp_start_timer() enqeues a delayed work. The time when it starts is randomly chosen between (elp_interval - BATADV_JITTER) and (elp_interval + BATADV_JITTER). The configured elp_interval must therefore be larger or equal to BATADV_JITTER to avoid that it causes an underflow of the unsigned integer. If this would happen, then a "fast" ELP interval would turn into a "day long" delay. At the same time, it must not be larger than the maximum value the variable can store. Cc: stable@kernel.org Fixes: a10800829040 ("batman-adv: Add elp_interval hardif genl configuration") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit c3815af7190322472048374e3d21a59a6d5b18d8 Author: Sven Eckelmann Date: Fri Jun 26 18:09:38 2026 +0200 batman-adv: bla: annotate lasttime access with READ/WRITE_ONCE commit 98b0fb191c878a64cbaebfe231d96d57576acf8c upstream. The lasttime field for claim, backbone_gw, and loopdetect tracks the jiffies value of the most recent activity and is used to detect timeouts. These accesses are not consistently protected by a lock, so READ_ONCE/WRITE_ONCE must be used to prevent data races caused by compiler optimizations. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit a39ba3fed4e53d9802ab030a03fd8783df94ba28 Author: Sven Eckelmann Date: Fri Jun 26 18:09:37 2026 +0200 batman-adv: tp_meter: add only finished tp_vars to lists commit 15ccbf685222274f5add1387af58c2a41a95f81e upstream. When the receiver variables (aka "session") are initialized, then they are added to the list of sessions before the timer is set up. A RCU protected reader could therefore find the entry and run mod_setup before batadv_tp_init_recv() finished the timer initialization. The same is true for batadv_tp_start(), which must first initialize the finish_work and the test_length to avoid a similar problem. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 795c25112eb1c150146180896ebdb4afa4aad266 Author: Sven Eckelmann Date: Fri Jun 26 18:09:36 2026 +0200 batman-adv: tp_meter: handle seqno wrap-around for fast recovery detection commit f54c85ed42a1b27a516cf2a4728f5a612b799e07 upstream. The recover variable and the last_sent sequence number are initialized on purpose as a really high value which will wrap-around after the first 2000 bytes. The fast recovery precondition must therefore not use simple integer comparisons but use helpers which are aware of the sequence number wrap-arounds. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 4eec81faf05b0dfa54dd71cb10058ac71369427b Author: Sven Eckelmann Date: Fri Jun 26 18:09:35 2026 +0200 batman-adv: tp_meter: fix fast recovery precondition commit 2b0d08f08ed3b2174f05c43089ec65f3543a025b upstream. The fast recovery precondition checks if the recover (initialized to BATADV_TP_FIRST_SEQ) is bigger than the received ack. But since recover is only updated when this check is successful, it will never enter the fast recovery mode. According to RFC6582 Section 3.2 step 2, the check should actually be different: > When the third duplicate ACK is received, the TCP sender first > checks the value of recover to see if the Cumulative > Acknowledgment field covers more than recover The precondition must therefore check if recover is smaller than the received ack - basically swapping the operands of the current check. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 35264c4d46067d6312871488c810cef387f8c1f6 Author: Sven Eckelmann Date: Fri Jun 26 18:09:34 2026 +0200 batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd commit 33ccd52f3cc9ed46ce395199f89aa3234dc83314 upstream. The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 4ffc51b88deb630dbaf3e3a87d9c123f1f3637d8 Author: Sven Eckelmann Date: Fri Jun 26 18:09:33 2026 +0200 batman-adv: tp_meter: avoid window underflow commit 765947b81fb54b6ebb0bc1cfe55c0fa399e002b8 upstream. In batadv_tp_avail(), win_left is calculated with 32-bit unsigned arithmetic: win_left = win_limit - tp_vars->last_sent; During Fast Recovery, cwnd is inflated and last_sent advances rapidly. When Fast Recovery ends, cwnd drops abruptly back to ss_threshold. If the newly shrunk win_limit is less than last_sent, the unsigned subtraction will underflow, wrapping to a massive positive value. Instead of returning that the window is full (unavailable), it returns that the sender can continue sending. To handle this situation, it must be checked whether the windows end sequence number (win_limit) has to be compared with the last sent sequence number. If it would be before the last sent sequence number, then more acks are needed before the transmission can be started again. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 39c1037e2bc08ff58d7a4168a528584330b8dbb6 Author: Sven Eckelmann Date: Fri Jun 26 18:09:32 2026 +0200 batman-adv: tp_meter: initialize dec_cwnd explicitly commit febfb1b86224489535312296ecfa3d4bf467f339 upstream. When batadv_tp_update_cwnd() is called, dec_cwnd is increased. But dec_cwnd is only initialixed (to 0) when a duplicate Ack was received or when cwnd is below the ss_threshold. Just initialize the cwnd during the initialization to avoid any potential access of uninitialized data. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit eaa583394a078804b7e8a1b36487b9952f7f47f1 Author: Sven Eckelmann Date: Fri Jun 26 18:09:31 2026 +0200 batman-adv: tp_meter: initialize dup_acks explicitly commit b2b68b32a715e0328662801576974aa37b942b00 upstream. When an ack with a sequence number equal to the last_acked is received, the dup_acks counter is increased to decide whether fast retransmit should be performed. Only when the sequence numbers are not equal, the dup_acks is set to the initial value (0). But if the initial packet would have the sequence number BATADV_TP_FIRST_SEQ, dup_acks would not be initialized and atomic_inc would operate on an undefined starting value. It is therefore required to have it explicitly initialized during the start of the sender session. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit c0a270f9d74a8284e93fc4cef494eafd03d155a1 Author: Sven Eckelmann Date: Fri Jun 26 18:09:30 2026 +0200 batman-adv: tp_meter: keep unacked list in ascending ordered commit 5aa8651527ea0b610e7a09fb3b8204c1398b9525 upstream. When batadv_tp_handle_out_of_order inserts a new entry in the list of unacked (out of order) packets, it searches from the entry with the newest sequence number towards oldest sequence number. If an entry is found which is older than the newly entry, the new entry has to be added after the found one to keep the ascending order. But for this operation list_add_tail() was used. But this function adds an entry _before_ another one. As result, the list would contain a lot of swapped sequence numbers. The consumer of this list (batadv_tp_ack_unordered()) would then fail to correctly ack packets. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit be84e8ac74b9564f998468633003df201e77ae9b Author: Pedro Tammela Date: Sat Jun 27 02:07:35 2026 +0800 net/sched: act_pedit: fix action bind logic [ Upstream commit e9e42292ea76a8358b0c02ffd530d78e133a1b73 ] The TC architecture allows filters and actions to be created independently. In filters the user can reference action objects using: tc action add action pedit ... index 1 tc filter add ... action pedit index 1 In the current code for act_pedit this is broken as it checks netlink attributes for create/update before actually checking if we are binding to an existing action. tdc results: 1..69 ok 1 319a - Add pedit action that mangles IP TTL ok 2 7e67 - Replace pedit action with invalid goto chain ok 3 377e - Add pedit action with RAW_OP offset u32 ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID) ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16 ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID) ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value ok 8 2893 - Add pedit action with RAW_OP offset u8 quad ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8 ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8 ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID) ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID) ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID) ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID) ok 32 ab06 - Add pedit action with LAYERED_OP eth add type ok 33 918d - Add pedit action with LAYERED_OP eth invert src ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type ok 36 7588 - Add pedit action with LAYERED_OP ip set src ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID) ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence ok 49 438e - Add pedit action with LAYERED_OP ip clear tos ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence ok 51 824a - Add pedit action with LAYERED_OP ip invert tos ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID) ok 56 815c - Add pedit action with LAYERED_OP ip6 set src ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID) ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID) ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1 ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2 Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Fixes: f67169fef8db ("net/sched: act_pedit: fix WARN() in the traffic path") Reviewed-by: Jamal Hadi Salim Signed-off-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 071590a44cbc38483fceb1ab943363ec26868e1b Author: Giovanni Cabiddu Date: Thu Jun 25 22:25:11 2026 -0400 crypto: qat - remove unused character device and IOCTLs [ Upstream commit d237230728c567297f2f98b425d63156ab2ed17f ] The QAT driver exposes a character device (qat_adf_ctl) with IOCTLs for device configuration, start, stop, status query and enumeration. These IOCTLs are not part of any public uAPI header and have no known in-tree or out-of-tree users. Device lifecycle is already managed via sysfs. The ioctl interface also increases the attack surface and is the subject of a number of bug reports. Remove the character device, the IOCTL definitions, and the related data structures (adf_dev_status_info, adf_user_cfg_key_val, adf_user_cfg_section, adf_user_cfg_ctl_data). Drop the now-unused adf_cfg_user.h header and strip adf_ctl_drv.c down to the minimal module_init/module_exit hooks for workqueue, AER, and crypto/compression algorithm registration. Clean up leftover dead code that was only reachable from the removed IOCTL paths: adf_cfg_del_all(), adf_devmgr_verify_id(), adf_devmgr_get_num_dev(), adf_devmgr_get_dev_by_id(), adf_get_vf_real_id() and the unused ADF_CFG macros. Additionally, drop the entry associated to QAT IOCTLs in ioctl-number.rst. Cc: stable@vger.kernel.org Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework") Reported-by: Zhi Wang Reported-by: Bin Yu Reported-by: MingYu Wang Closes: https://lore.kernel.org/all/61d6d499.ab89.19b9b7f3186.Coremail.wangzhi_xd@stu.xidian.edu.cn/ Link: https://lore.kernel.org/all/20260508034841.256794-1-w15303746062@163.com/ Link: https://lore.kernel.org/all/20260508023542.256299-1-w15303746062@163.com/ Link: https://lore.kernel.org/all/20260504025120.98242-1-w15303746062@163.com/ Signed-off-by: Giovanni Cabiddu Reviewed-by: Ahsan Atta Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit c3a871944de88ad69af0a8af8a7e432eb35f7d03 Author: Herbert Xu Date: Thu Jun 25 22:25:10 2026 -0400 crypto: qat - Return pointer directly in adf_ctl_alloc_resources [ Upstream commit 5ce9891ea928208a915411ce8227f8c3e37e5ad9 ] Returning values through arguments is confusing and that has upset the compiler with the recent change to memdup_user: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:308:26: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized] 308 | ctl_data->device_id); | ^~ ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:294:39: note: ‘ctl_data’ was declared here 294 | struct adf_user_cfg_ctl_data *ctl_data; | ^~~~~~~~ In function ‘adf_ctl_ioctl_dev_stop’, inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:386:9: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:273:48: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized] 273 | ret = adf_ctl_is_device_in_use(ctl_data->device_id); | ~~~~~~~~^~~~~~~~~~~ ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:261:39: note: ‘ctl_data’ was declared here 261 | struct adf_user_cfg_ctl_data *ctl_data; | ^~~~~~~~ In function ‘adf_ctl_ioctl_dev_config’, inlined from ‘adf_ctl_ioctl’ at ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:382:9: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:192:54: warning: ‘ctl_data’ may be used uninitialized [-Wmaybe-uninitialized] 192 | accel_dev = adf_devmgr_get_dev_by_id(ctl_data->device_id); | ~~~~~~~~^~~~~~~~~~~ ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c: In function ‘adf_ctl_ioctl’: ../drivers/crypto/intel/qat/qat_common/adf_ctl_drv.c:185:39: note: ‘ctl_data’ was declared here 185 | struct adf_user_cfg_ctl_data *ctl_data; | ^~~~~~~~ Fix this by returning the pointer directly. Signed-off-by: Herbert Xu Reviewed-by: Thorsten Blum Acked-by: Giovanni Cabiddu Signed-off-by: Herbert Xu Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs") Signed-off-by: Sasha Levin commit 8e1393d97be101163cec9f339241f1f743a77d91 Author: Thorsten Blum Date: Thu Jun 25 22:25:09 2026 -0400 crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() [ Upstream commit 1e26339703e2afd397037defa798682b2b93dcc0 ] Replace kzalloc() followed by copy_from_user() with memdup_user() to improve and simplify adf_ctl_alloc_resources(). memdup_user() returns either -ENOMEM or -EFAULT (instead of -EIO) if an error occurs. Remove the unnecessary device id initialization, since memdup_user() (like copy_from_user()) immediately overwrites it. No functional changes intended other than returning the more idiomatic error code -EFAULT. Signed-off-by: Thorsten Blum Signed-off-by: Herbert Xu Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs") Signed-off-by: Sasha Levin commit f2cd081bd95b07962cb5ee84e012349c1353ef37 Author: Bagas Sanjaya Date: Thu Jun 25 22:25:08 2026 -0400 Documentation: ioctl-number: Extend "Include File" column width [ Upstream commit 15afd5def819e4df2a29cef6fcfa6ae7ba167c0f ] Extend width of "Include File" column to fit full path to papr-physical-attestation.h in later commit. Reviewed-by: Haren Myneni Signed-off-by: Bagas Sanjaya Acked-by: Madhavan Srinivasan Signed-off-by: Jonathan Corbet Link: https://lore.kernel.org/r/20250714015711.14525-3-bagasdotme@gmail.com Stable-dep-of: d237230728c5 ("crypto: qat - remove unused character device and IOCTLs") Signed-off-by: Sasha Levin commit 455bc12e7b73ab5a2dfcb47822e91e772bc6c42e Author: Ruslan Valiyev Date: Tue Mar 17 17:05:44 2026 +0000 media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si commit 7d8bf3d8f91073f4db347ed3aa6302b56107499c upstream. syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408 Fixes: f90cf6079bf67 ("media: vidtv: add a bridge driver") Cc: stable@vger.kernel.org Reported-by: syzbot+814c351d094f4f1a1b86@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=814c351d094f4f1a1b86 Signed-off-by: Ruslan Valiyev Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman commit 43a6281790273c1b0a9ab76609ff0245b968f1e6 Author: Yi Yang Date: Thu Jun 4 06:07:34 2026 +0000 vc_screen: fix null-ptr-deref in vcs_notifier() during concurrent vcs_write commit a287620312dc6dcb9a093417a0e589bf30fcf38a upstream. A KASAN null-ptr-deref was observed in vcs_notifier(): BUG: KASAN: null-ptr-deref in vcs_notifier+0x98/0x130 Read of size 2 at addr qmp_cmd_name: qmp_capabilities, arguments: {} The issue is a race condition in vcs_write(). When the console_lock is temporarily dropped (to copy data from userspace), the vc_data pointer obtained from vcs_vc() may become stale. After re-acquiring the lock, vcs_vc() is called again to re-validate the pointer. If the vc has been deallocated in the meantime, vcs_vc() returns NULL, and the while loop breaks (with written > 0). However, after the loop, vcs_scr_updated(vc) is still called with the now-NULL vc pointer, leading to a null pointer dereference in the notifier chain (vcs_notifier dereferences param->vc). Fix this by adding a NULL check for vc before calling vcs_scr_updated(). Fixes: 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") Cc: stable@vger.kernel.org Signed-off-by: Yi Yang Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20260604060734.2914976-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman commit e77357dc2293283fc08a485b1e2e571d91d02622 Author: André Draszik Date: Fri Jan 9 08:38:38 2026 +0000 regulator: core: fix locking in regulator_resolve_supply() error path commit 497330b203d2c59c5ff3fa4c34d14494d7203bc3 upstream. If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference. Fixes: 36a1f1b6ddc6 ("regulator: core: Fix memory leak in regulator_resolve_supply()") Fixes: 8e5356a73604 ("regulator: core: Clear the supply pointer if enabling fails") Signed-off-by: André Draszik Link: https://patch.msgid.link/20260109-regulators-defer-v2-2-1a25dc968e60@linaro.org Signed-off-by: Mark Brown Signed-off-by: Nazar Kalashnikov Signed-off-by: Greg Kroah-Hartman commit ce800993af477fc24187349c6a20d3073140b759 Author: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon May 4 15:48:23 2026 +0800 agp/amd64: Fix broken error propagation in agp_amd64_probe() commit b08472db93b1ccff84a7adec5779d47f0e9d3a30 upstream. A NULL pointer dereference was observed in the AMD64 AGP driver when running in a virtualized environment (e.g. qemu/kvm) without a physical AMD northbridge. The crash occurs in amd64_fetch_size() when attempting to dereference the pointer returned by node_to_amd_nb(0). The root cause of this crash is broken error propagation in agp_amd64_probe(): When no AMD northbridges are found, cache_nbs() correctly returns -ENODEV. However, the probe function erroneously checks the return value against exactly -1, rather than < 0. As a result, the hardware absence error is masked, allowing the driver to improperly proceed with initialization. It eventually calls agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware does not exist, node_to_amd_nb(0) returns NULL, leading to a General Protection Fault (GPF) when accessing its ->misc member. Fix the issue by correcting the error check in agp_amd64_probe() to abort properly when cache_nbs() returns any negative error code. This prevents the driver from erroneously proceeding without hardware, thereby avoiding the subsequent NULL pointer dereference at its source. Fixes: a32073bffc65 ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code") Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Lukas Wunner Reviewed-by: Lukas Wunner Cc: stable@vger.kernel.org # v2.6.18+ Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com Signed-off-by: Greg Kroah-Hartman commit c4e676c3505c5058922dc1a6f1ded795f6758135 Author: Weiming Shi Date: Thu May 14 05:25:12 2026 -0700 net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() commit d00c953a8f69921f484b629801766da68f27f658 upstream. rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7e9072dbd5f2f17934751873450d2c22080ead80 Author: Weiming Shi Date: Wed Apr 15 01:23:39 2026 +0800 i2c: stub: Reject I2C block transfers with invalid length commit 6036b5067a8199ba7a2dc7b377d4b9dd276d5f9e upstream. The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0] as the transfer length. The existing check only clamps it to avoid overrunning the chip->words[256] register array, but does not validate it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union i2c_smbus_data.block buffer (34 bytes total). The driver is a development/test tool (CONFIG_I2C_STUB=m, not built by default) that must be loaded with a chip_addr= parameter. A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing stub_xfer() to read or write past the end of the union i2c_smbus_data.block buffer: BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223) Read of size 1 at addr ffff88800abcfd92 by task exploit/81 Call Trace: stub_xfer (drivers/i2c/i2c-stub.c:223) __i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593) i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536) i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391) i2cdev_ioctl (drivers/i2c/i2c-dev.c:478) __x64_sys_ioctl (fs/ioctl.c:583) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) The bug exists because i2c-stub implements .smbus_xfer directly, bypassing the I2C_SMBUS_BLOCK_MAX validation in i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same function correctly validates against I2C_SMBUS_BLOCK_MAX, but the I2C_SMBUS_I2C_BLOCK_DATA case does not. Fix by rejecting transfers with data->block[0] == 0 or data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with both the I2C_SMBUS_BLOCK_DATA case in the same function and the I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated(). Fixes: 4710317891e4 ("i2c-stub: Implement I2C block support") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman commit 53c97e9882f4e747b4ac31b211317c2eba541af9 Author: Lord Ulf Henrik Holmberg Date: Sat May 9 10:40:11 2026 +0200 RDMA/bnxt_re: zero shared page before exposing to userspace commit f6b079629becfa977f9c51fe53ad2e6dcc55ef44 upstream. bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page(). Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Lord Ulf Henrik Holmberg Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com Signed-off-by: Leon Romanovsky Signed-off-by: Greg Kroah-Hartman commit a25f59d77de7e19675f7bf8e430438271024319f Author: Jiacheng Shi Date: Sun Dec 12 01:16:00 2021 -0800 vfio/iommu_type1: replace kfree with kvfree [ Upstream commit 2bed2ced40c97b8540ff38df0149e8ecb2bf4c65 ] Variables allocated by kvzalloc should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree with kvfree here. Fixes: d6a4c185660c ("vfio iommu: Implementation of ioctl for dirty pages tracking") Signed-off-by: Jiacheng Shi Link: https://lore.kernel.org/r/20211212091600.2560-1-billsjc@sjtu.edu.cn Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin commit 7af8c1c22e39df7efe9d6c816a771cbc95bf09fc Author: Sven Eckelmann Date: Fri May 29 22:12:35 2026 +0200 batman-adv: tt: prevent TVLV entry number overflow commit 99d9958fa10fb684b2a8e2c48a8d704122721420 upstream. The helpers to prepare the buffers for the local and global TT based replies are trying to sum up all TT entries which can be found for each VLAN. In theory, this sum can be too big for an u16 and therefore overflow. A too small buffer would then be allocated for the TVLV. The too small buffer will be handled gracefully by batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a truncated reply. But this overflow shouldn't have happened in the first and the too small buffer should never have been allocated when an overflow was detected. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit c221df8bb87d9a9024654599a038be34854c2d90 Author: Sven Eckelmann Date: Fri May 29 22:11:09 2026 +0200 batman-adv: tt: reject oversized local TVLV buffers commit 1e9fab756f8395096d5bba7be0c373c4c8f5d165 upstream. The commit 3a359bf5c61d ("batman-adv: reject oversized global TT response buffers") added a check to ensure that a global return buffer size can be stored in an u16. The same buffer handling also exists for the local data buffer but was not touched. A similar check should be also be in place for the local TVLV buffer. It doesn't have the similar attack surface because it is only generated from locally discovered MAC addresses but the dynamic nature could still cause temporarily to large buffers. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") [ Context ] Signed-off-by: Sven Eckelmann Signed-off-by: Sasha Levin commit 7d79725a7073d86b9185f87718e22f3d65115801 Author: Wang Yufen Date: Fri Jun 19 12:15:06 2026 +0300 netdevsim: Fix memory leak of nsim_dev->fa_cookie commit 064bc7312bd09a48798418663090be0c776183db upstream. kmemleak reports this issue: unreferenced object 0xffff8881bac872d0 (size 8): comm "sh", pid 58603, jiffies 4481524462 (age 68.065s) hex dump (first 8 bytes): 04 00 00 00 de ad be ef ........ backtrace: [<00000000c80b8577>] __kmalloc+0x49/0x150 [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim] [<0000000093d78e77>] full_proxy_write+0xf3/0x180 [<000000005a662c16>] vfs_write+0x1c5/0xaf0 [<000000007aabf84a>] ksys_write+0xed/0x1c0 [<000000005f1d2e47>] do_syscall_64+0x3b/0x90 [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: nsim_dev_trap_fa_cookie_write() kmalloc() fa_cookie nsim_dev->fa_cookie = fa_cookie .. nsim_drv_remove() The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Wang Yufen Cc: Jiri Pirko Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com Signed-off-by: Jakub Kicinski [ The context change is due to the commit 5e388f3dc38c ("netdevsim: move vfconfig to nsim_dev") in v5.16 which is irrelevant to the logic of this patch. ] Signed-off-by: Mikhail Dmitrichenko Signed-off-by: Sasha Levin commit 9bc63a124cc20a69a126e45e3d593d5807bb5258 Author: Hangyu Hua Date: Thu Jun 18 15:19:21 2026 +0000 net: 9p: fix refcount leak in p9_read_work() error handling commit 4ac7573e1f9333073fa8d303acc941c9b7ab7f61 upstream. p9_req_put need to be called when m->rreq->rc.sdata is NULL to avoid temporary refcount leak. Link: https://lkml.kernel.org/r/20220712104438.30800-1-hbh25y@gmail.com Fixes: 728356dedeff ("9p: Add refcount to p9_req_t") Signed-off-by: Hangyu Hua [Dominique: commit wording adjustments, p9_req_put argument fixes for rebase] Signed-off-by: Dominique Martinet [Alexander: this branch doesn't contain 8b11ff098af4 ("9p: Add client parameter to p9_req_put()"), therefore the parameter is removed from the added line] Signed-off-by: Alexander Martyniuk Signed-off-by: Sasha Levin commit 9540b0a4d13e4ede64ae1197d66a176d2149daa9 Author: Harry Wentland Date: Thu Jun 18 08:55:08 2026 -0400 drm/amd/display: Use krealloc_array() in dal_vector_reserve() [ Upstream commit da48bc4461b8a5ebfb9264c9b191a701d8e99009 ] [Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends. Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue. Fixes: 2004f45ef83f ("drm/amd/display: Use kernel alloc/free") Assisted-by: Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) Cc: stable@vger.kernel.org [ changed `krealloc_array(p, capacity, struct_size)` to `krealloc(p, array_size(capacity, struct_size))` since krealloc_array() is absent in 5.10 ] Signed-off-by: Sasha Levin commit 66e4b63d61c15de6ca5332d9ca6db59a404d7136 Author: Eric Dumazet Date: Thu Jun 18 01:08:07 2026 -0700 net/sched: cls_u32: use skb_header_pointer_careful() [ Upstream commit cabd1a976375780dabab888784e356f574bbaed8 ] skb_header_pointer() does not fully validate negative @offset values. Use skb_header_pointer_careful() instead. GangMin Kim provided a report and a repro fooling u32_classify(): BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0 net/sched/cls_u32.c:221 Fixes: fbc2e7d9cf49 ("cls_u32: use skb_header_pointer() to dereference data safely") Reported-by: GangMin Kim Closes: https://lore.kernel.org/netdev/CANn89iJkyUZ=mAzLzC4GdcAgLuPnUoivdLaOs6B9rq5_erj76w@mail.gmail.com/T/ Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260128141539.3404400-3-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Bin Lan Signed-off-by: Greg Kroah-Hartman [ Shivani: Modified to apply on 5.10.y ] Signed-off-by: Shivani Agarwal Signed-off-by: Sasha Levin commit 1c10b0597408e4d4acf4b26675ddc370ab01d2f3 Author: Eric Dumazet Date: Thu Jun 18 01:08:06 2026 -0700 net: add skb_header_pointer_careful() helper [ Upstream commit 13e00fdc9236bd4d0bff4109d2983171fbcb74c4 ] This variant of skb_header_pointer() should be used in contexts where @offset argument is user-controlled and could be negative. Negative offsets are supported, as long as the zone starts between skb->head and skb->data. Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com Signed-off-by: Jakub Kicinski [ Adjust context ] Signed-off-by: Bin Lan Signed-off-by: Greg Kroah-Hartman [ Shivani: Modified to apply on 5.10.y ] Signed-off-by: Shivani Agarwal Signed-off-by: Sasha Levin commit 12acc977838c943636fb01e2f3087d2e4cc3b7cc Author: Eric Dumazet Date: Mon Jun 8 15:59:18 2026 +0000 ip6_vti: set netns_immutable on the fallback device. [ Upstream commit d289d5307762d1838aaece22c6b6fcad9e8865f9 ] john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace. Fixes: 61220ab34948 ("vti6: Enable namespace changing") Reported-by: Noam Rathaus Signed-off-by: Eric Dumazet Cc: Steffen Klassert Reviewed-by: Nicolas Dichtel Link: https://patch.msgid.link/20260608155918.787644-1-edumazet@google.com Signed-off-by: Jakub Kicinski [Salvatore Bonaccorso: Backport for version without 0c493da86374 ("net: rename netns_local to netns_immutable") in v6.15-rc1 and without 05c1280a2bcf ("netdev_features: convert NETIF_F_NETNS_LOCAL to dev->netns_local") in v6.12-rc1 and use NETIF_F_NETNS_LOCAL device feature.] Signed-off-by: Salvatore Bonaccorso Signed-off-by: Sasha Levin commit e94f5323c41f32a74160378c3b19850d1f203ad5 Author: Harry Wentland Date: Tue May 12 15:24:22 2026 -0400 drm/amd/display: Bound VBIOS record-chain walk loops [ Upstream commit ff287df16a1a58aca78b08d1f3ee09fc44da0351 ] [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Assisted-by: Copilot:claude-opus-4.6 Mythos Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93) Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin commit 946b97d632f0f58a705dafac644c1e9346e01f35 Author: Bjorn Andersson Date: Wed Jun 17 22:19:09 2026 -0400 slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd [ Upstream commit 2a9d50e9ea406e0c8735938484adc20515ef1b47 ] When the remoteproc starts in parallel with the NGD driver being probed, or the remoteproc is already up when the PDR lookup is being registered, or in the theoretical event that we get an interrupt from the hardware, these callbacks will operate on uninitialized data. This result in issues to boot the affected boards. One such example can be seen in the following fault, where qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work. [ 21.858578] ------------[ cut here ]------------ [ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116 ... [ 21.859251] Call trace: [ 21.859255] __queue_work+0x5e0/0x790 (P) [ 21.859265] queue_work_on+0x6c/0xf0 [ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl] [ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl] [ 21.859318] notifier_call_chain+0xa4/0x230 [ 21.859329] srcu_notifier_call_chain+0x64/0xb8 [ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common] [ 21.859355] rproc_start+0x130/0x230 [ 21.859367] rproc_boot+0x3d4/0x518 ... Move the enablement of interrupts, and the registration of SSR and PDR until after the NGD device has been registered. This could be further refined by moving initialization to the control driver probe and by removing the platform driver model from the picture. Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: stable@vger.kernel.org Reviewed-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260530204421.116824-6-srini@kernel.org Signed-off-by: Greg Kroah-Hartman [ dropped absent PDR/SSR registration block and kept 5.10's `res->start`/`dev_err` IRQ idiom, adding only `IRQF_NO_AUTOEN` plus a deferred `enable_irq(res->start)` after `of_qcom_slim_ngd_register()` ] Signed-off-by: Sasha Levin commit feafe8ccb1584254f59fbd4946d6ca7ef1e3e99c Author: Jann Horn Date: Tue Jun 16 21:00:23 2026 +0200 fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios [ Upstream commit 4e3d1b2c48ca6c55f1e9ca7f8dccc76f120f276c ] FUSE_NOTIFY_RETRIEVE must be limited to uptodate folios; !uptodate folios can contain uninitialized data. Since FUSE_NOTIFY_RETRIEVE is intended to only return data that is already in the page cache and not wait for data from the FUSE daemon, treat !uptodate folios as if they weren't present. This only has security impact on systems that don't enable automatic zero-initialization of all page allocations via CONFIG_INIT_ON_ALLOC_DEFAULT_ON or init_on_alloc=1. Cc: stable@kernel.org Fixes: 2d45ba381a74 ("fuse: add retrieve request") Signed-off-by: Jann Horn Link: https://patch.msgid.link/20260519-fuse-retrieve-uptodate-v1-1-a7a1912a37f9@google.com Acked-by: Miklos Szeredi Signed-off-by: Christian Brauner (Amutable) [adjusted for stable: page instead of folio] Signed-off-by: Jann Horn Signed-off-by: Sasha Levin commit caffd61f9e671d85be2dd35bd8392bcdc7312865 Author: Pedro Tammela Date: Thu Jun 18 15:53:52 2026 +0800 net/sched: act_pedit: free pedit keys on bail from offset check [ Upstream commit 1b483d9f5805c7e3d628d4995e97f4311fcb82eb ] Ido Schimmel reports a memleak on a syzkaller instance: BUG: memory leak unreferenced object 0xffff88803d45e400 (size 1024): comm "syz-executor292", pid 563, jiffies 4295025223 (age 51.781s) hex dump (first 32 bytes): 28 bd 70 00 fb db df 25 02 00 14 1f ff 02 00 02 (.p....%........ 00 32 00 00 1f 00 00 00 ac 14 14 3e 08 00 07 00 .2.........>.... backtrace: [] kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline] [] slab_post_alloc_hook mm/slab.h:772 [inline] [] slab_alloc_node mm/slub.c:3452 [inline] [] __kmem_cache_alloc_node+0x25c/0x320 mm/slub.c:3491 [] __do_kmalloc_node mm/slab_common.c:966 [inline] [] __kmalloc+0x59/0x1a0 mm/slab_common.c:980 [] kmalloc include/linux/slab.h:584 [inline] [] tcf_pedit_init+0x793/0x1ae0 net/sched/act_pedit.c:245 [] tcf_action_init_1+0x453/0x6e0 net/sched/act_api.c:1394 [] tcf_action_init+0x5a8/0x950 net/sched/act_api.c:1459 [] tcf_action_add+0x118/0x4e0 net/sched/act_api.c:1985 [] tc_ctl_action+0x377/0x490 net/sched/act_api.c:2044 [] rtnetlink_rcv_msg+0x46d/0xd70 net/core/rtnetlink.c:6395 [] netlink_rcv_skb+0x185/0x490 net/netlink/af_netlink.c:2575 [] rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6413 [] netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] [] netlink_unicast+0x5be/0x8a0 net/netlink/af_netlink.c:1365 [] netlink_sendmsg+0x9af/0xed0 net/netlink/af_netlink.c:1942 [] sock_sendmsg_nosec net/socket.c:724 [inline] [] sock_sendmsg net/socket.c:747 [inline] [] ____sys_sendmsg+0x3ef/0xaa0 net/socket.c:2503 [] ___sys_sendmsg+0x122/0x1c0 net/socket.c:2557 [] __sys_sendmsg+0x11f/0x200 net/socket.c:2586 [] __do_sys_sendmsg net/socket.c:2595 [inline] [] __se_sys_sendmsg net/socket.c:2593 [inline] [] __x64_sys_sendmsg+0x80/0xc0 net/socket.c:2593 The recently added static offset check missed a free to the key buffer when bailing out on error. Fixes: e1201bc781c2 ("net/sched: act_pedit: check static offsets a priori") Reported-by: Ido Schimmel Signed-off-by: Pedro Tammela Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Link: https://lore.kernel.org/r/20230425144725.669262-1-pctammela@mojatatu.com Signed-off-by: Paolo Abeni Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 544d857b42a1734b923040e13aa61a6fd4746cf2 Author: Rajat Gupta Date: Thu Jun 18 15:53:50 2026 +0800 net/sched: fix pedit partial COW leading to page cache corruption [ Upstream commit 899ee91156e57784090c5565e4f31bd7dbffbc5a ] tcf_pedit_act() computes the COW range for skb_ensure_writable() once before the key loop using tcfp_off_max_hint, but the hint does not account for the runtime header offset added by typed keys. This can leave part of the write region un-COW'd. Fix by moving skb_ensure_writable() inside the per-key loop where the actual write offset is known, and add overflow checking on the offset arithmetic. For negative offsets (e.g. Ethernet header edits at ingress), use skb_cow() to COW the headroom instead. Guard offset_valid() against INT_MIN, where negation is undefined. Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Reported-by: Yiming Qian Reported-by: Keenan Dong Reported-by: Han Guidong <2045gemini@gmail.com> Reported-by: Zhang Cen Reviewed-by: Han Guidong <2045gemini@gmail.com> Tested-by: Han Guidong <2045gemini@gmail.com> Reviewed-by: Davide Caratti Tested-by: Davide Caratti Reviewed-by: Toke Høiland-Jørgensen Tested-by: Toke Høiland-Jørgensen Reviewed-by: Victor Nogueira Tested-by: Victor Nogueira Acked-by: Jamal Hadi Salim Signed-off-by: Rajat Gupta Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com [rename include file from linux/unaligned.h to asm/unaligned.h] Conflicts: include/net/tc_act/tc_pedit.h net/sched/act_pedit.c Signed-off-by: Jakub Kicinski Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 38b3190ffd0ee4a4323220b11faa3cf9bcd5cbf0 Author: Max Tottenham Date: Thu Jun 18 15:53:48 2026 +0800 net/sched: act_pedit: Parse L3 Header for L4 offset [ Upstream commit 6c02568fd1ae53099b4ab86365c5be1ff15f586b ] Instead of relying on skb->transport_header being set correctly, opt instead to parse the L3 header length out of the L3 headers for both IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a bug if GRO is disabled, when GRO is disabled skb->transport_header is set by __netif_receive_skb_core() to point to the L3 header, it's later fixed by the upper protocol layers, but act_pedit will receive the SKB before the fixups are completed. The existing behavior causes the following to edit the L3 header if GRO is disabled instead of the UDP header: tc filter add dev eth0 ingress protocol ip flower ip_proto udp \ dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053 Also re-introduce a rate-limited warning if we were unable to extract the header offset when using the 'ex' interface. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Max Tottenham Reviewed-by: Josh Hunt Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/ Reviewed-by: Pedro Tammela Signed-off-by: David S. Miller (cherry picked from commit 6c02568fd1ae53099b4ab86365c5be1ff15f586b) Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 7b9ec7d1793faddca36a8d2515f97d94454d9d01 Author: Pedro Tammela Date: Thu Jun 18 15:53:46 2026 +0800 net/sched: act_pedit: rate limit datapath messages [ Upstream commit e3c9673e2f6e1b3aa4bb87c570336e10f364c28a ] Unbounded info messages in the pedit datapath can flood the printk ring buffer quite easily depending on the action created. As these messages are informational, usually printing some, not all, is enough to bring attention to the real issue. Reviewed-by: Jamal Hadi Salim Reviewed-by: Simon Horman Signed-off-by: Pedro Tammela Signed-off-by: David S. Miller Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 9d6ef73e3fde38dc3183d85622cd9e38a51ac626 Author: Pedro Tammela Date: Thu Jun 18 15:53:44 2026 +0800 net/sched: act_pedit: check static offsets a priori [ Upstream commit e1201bc781c28766720e78a5e099ffa568be4d74 ] Static key offsets should always be on 32 bit boundaries. Validate them on create/update time for static offsets and move the datapath validation for runtime offsets only. iproute2 already errors out if a given offset and data size cannot be packed to a 32 bit boundary. This change will make sure users which create/update pedit instances directly via netlink also error out, instead of finding out when packets are traversing. Reviewed-by: Jamal Hadi Salim Reviewed-by: Simon Horman Signed-off-by: Pedro Tammela Signed-off-by: David S. Miller Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 7b3e09728498239cf2ff07d5b381dab462e8d497 Author: Pedro Tammela Date: Thu Jun 18 15:53:42 2026 +0800 net/sched: act_pedit: remove extra check for key type [ Upstream commit 577140180ba28d0d37bc898c7bd6702c83aa106f ] The netlink parsing already validates the key 'htype'. Remove the datapath check as it's redundant. Reviewed-by: Jamal Hadi Salim Reviewed-by: Simon Horman Signed-off-by: Pedro Tammela Signed-off-by: David S. Miller Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit 8dd281140df7ad84bb519671cbaa9ce3dd181671 Author: Pedro Tammela Date: Thu Jun 18 15:53:40 2026 +0800 net/sched: simplify tcf_pedit_act [ Upstream commit 95b069382351826c0ae37938070aa82dbeaf288d ] Remove the check for a negative number of keys as this cannot ever happen Reviewed-by: Jamal Hadi Salim Reviewed-by: Simon Horman Signed-off-by: Pedro Tammela Signed-off-by: Paolo Abeni Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit b2407d362dcbbc4b51692d41abf19d884df2aa37 Author: Pedro Tammela Date: Thu Jun 18 15:53:38 2026 +0800 net/sched: transition act_pedit to rcu and percpu stats [ Upstream commit 52cf89f78c01bf39973f3e70d366921d70faff7a ] The software pedit action didn't get the same love as some of the other actions and it's still using spinlocks and shared stats in the datapath. Transition the action to rcu and percpu stats as this improves the action's performance dramatically on multiple cpu deployments. Reviewed-by: Jamal Hadi Salim Signed-off-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: Paolo Abeni Conflicts: net/sched/act_pedit.c Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin commit d12ed39ae2add31fbdf3f505f5e19200f42040a8 Author: Pedro Tammela Date: Thu Jun 18 15:53:36 2026 +0800 net/sched: act_pedit: use NLA_POLICY for parsing 'ex' keys [ Upstream commit 5036034572b79daa6d6600338e8e8229e2a44b09 ] Transform two checks in the 'ex' key parsing into netlink policies removing extra if checks. Signed-off-by: Pedro Tammela Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Wentao Guan Signed-off-by: Sasha Levin