commit 5a8fa04b2a4de1d52be4a04690dcb52ac7998943 Author: Greg Kroah-Hartman Date: Tue Oct 22 15:39:30 2024 +0200 Linux 5.10.228 Link: https://lore.kernel.org/r/20241021102241.624153108@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Pavel Machek (CIP) Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 2abe57d62a454f1b42eb69d469964bfbe0be3257 Author: Vasiliy Kovalev Date: Wed Oct 16 11:07:13 2024 +0300 ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2 commit 164cd0e077a18d6208523c82b102c98c77fdd51f upstream. The cached version avoids redundant commands to the codec, improving stability and reducing unnecessary operations. This change ensures better power management and reliable restoration of pin configurations, especially after hibernation (S4) and other power transitions. Fixes: 9988844c457f ("ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2") Suggested-by: Kai-Heng Feng Suggested-by: Takashi Iwai Signed-off-by: Vasiliy Kovalev Link: https://patch.msgid.link/20241016080713.46801-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 25e86fb0aeecf9485bd3a72d84637df015d6838f Author: Aneesh Kumar K.V Date: Mon Jul 4 12:08:51 2022 +0530 powerpc/mm: Always update max/min_low_pfn in mem_topology_setup() commit 7b31f7dadd7074fa70bb14a53bd286ffdfc98b04 upstream. For both CONFIG_NUMA enabled/disabled use mem_topology_setup() to update max/min_low_pfn. This also adds min_low_pfn update to CONFIG_NUMA which was initialized to zero before. (mpe: Though MEMORY_START is == 0 for PPC64=y which is all possible NUMA=y systems) Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220704063851.295482-1-aneesh.kumar@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit c1d0476885d708a932980b0f28cd90d9bd71db39 Author: Ryusuke Konishi Date: Fri Oct 4 12:35:31 2024 +0900 nilfs2: propagate directory read errors from nilfs_find_entry() commit 08cfa12adf888db98879dbd735bc741360a34168 upstream. Syzbot reported that a task hang occurs in vcs_open() during a fuzzing test for nilfs2. The root cause of this problem is that in nilfs_find_entry(), which searches for directory entries, ignores errors when loading a directory page/folio via nilfs_get_folio() fails. If the filesystem images is corrupted, and the i_size of the directory inode is large, and the directory page/folio is successfully read but fails the sanity check, for example when it is zero-filled, nilfs_check_folio() may continue to spit out error messages in bursts. Fix this issue by propagating the error to the callers when loading a page/folio fails in nilfs_find_entry(). The current interface of nilfs_find_entry() and its callers is outdated and cannot propagate error codes such as -EIO and -ENOMEM returned via nilfs_find_entry(), so fix it together. Link: https://lkml.kernel.org/r/20241004033640.6841-1-konishi.ryusuke@gmail.com Fixes: 2ba466d74ed7 ("nilfs2: directory entry operations") Signed-off-by: Ryusuke Konishi Reported-by: Lizhi Xu Closes: https://lkml.kernel.org/r/20240927013806.3577931-1-lizhi.xu@windriver.com Reported-by: syzbot+8a192e8d090fa9a31135@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8a192e8d090fa9a31135 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit c38add9ac0e4d4f418e6443a688491499021add9 Author: Paolo Abeni Date: Sat Oct 19 12:29:09 2024 +0200 tcp: fix mptcp DSS corruption due to large pmtu xmit commit 4dabcdf581217e60690467a37c956a5b8dbc6bd9 upstream. Syzkaller was able to trigger a DSS corruption: TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Modules linked in: CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695 Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff RSP: 0018:ffffc90000006db8 EFLAGS: 00010246 RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00 RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0 RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8 R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000 R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5 FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: move_skbs_to_msk net/mptcp/protocol.c:811 [inline] mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854 subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490 tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283 tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5662 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6107 __napi_poll+0xcb/0x490 net/core/dev.c:6771 napi_poll net/core/dev.c:6840 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6962 handle_softirqs+0x2c5/0x980 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451 dev_queue_xmit include/linux/netdevice.h:3094 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline] tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline] tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752 __tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015 tcp_push_pending_frames include/net/tcp.h:2107 [inline] tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline] tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239 tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915 sk_backlog_rcv include/net/sock.h:1113 [inline] __release_sock+0x214/0x350 net/core/sock.c:3072 release_sock+0x61/0x1f0 net/core/sock.c:3626 mptcp_push_release net/mptcp/protocol.c:1486 [inline] __mptcp_push_pending+0x6b5/0x9f0 net/mptcp/protocol.c:1625 mptcp_sendmsg+0x10bb/0x1b10 net/mptcp/protocol.c:1903 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x52a/0x7e0 net/socket.c:2603 ___sys_sendmsg net/socket.c:2657 [inline] __sys_sendmsg+0x2aa/0x390 net/socket.c:2686 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fb06e9317f9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe2cfd4f98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fb06e97f468 RCX: 00007fb06e9317f9 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000005 RBP: 00007fb06e97f446 R08: 0000555500000000 R09: 0000555500000000 R10: 0000555500000000 R11: 0000000000000246 R12: 00007fb06e97f406 R13: 0000000000000001 R14: 00007ffe2cfd4fe0 R15: 0000000000000003 Additionally syzkaller provided a nice reproducer. The repro enables pmtu on the loopback device, leading to tcp_mtu_probe() generating very large probe packets. tcp_can_coalesce_send_queue_head() currently does not check for mptcp-level invariants, and allowed the creation of cross-DSS probes, leading to the mentioned corruption. Address the issue teaching tcp_can_coalesce_send_queue_head() about mptcp using the tcp_skb_can_collapse(), also reducing the code duplication. Fixes: 85712484110d ("tcp: coalesce/collapse must respect MPTCP extensions") Cc: stable@vger.kernel.org Reported-by: syzbot+d1bff73460e33101f0e7@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/513 Signed-off-by: Paolo Abeni Acked-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-2-c6fb8e93e551@kernel.org Signed-off-by: Jakub Kicinski [ Conflict in tcp_output.c, because commit 65249feb6b3d ("net: add support for skbs with unreadable frags"), and commit 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") are not in this version. These commits are linked to new features and introduce new conditions which cause the conflicts. Resolving this is easy: we can ignore the missing new condition, and use tcp_skb_can_collapse() like in the original patch. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman commit fde99e972b8f88cebe619241d7aa43d288ef666a Author: Paolo Abeni Date: Sat Oct 19 12:29:08 2024 +0200 mptcp: handle consistently DSS corruption commit e32d262c89e2b22cb0640223f953b548617ed8a6 upstream. Bugged peer implementation can send corrupted DSS options, consistently hitting a few warning in the data path. Use DEBUG_NET assertions, to avoid the splat on some builds and handle consistently the error, dumping related MIBs and performing fallback and/or reset according to the subflow type. Fixes: 6771bfd9ee24 ("mptcp: update mptcp ack sequence from work queue") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org Signed-off-by: Jakub Kicinski [ Conflicts in mib.[ch], because commit 104125b82e5c ("mptcp: add mib for infinite map sending") is linked to a new feature, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "DSS corruptions" MIB entries. Also removed in protocol.c and subflow.c all DEBUG_NET_WARN_ON_ONCE because they are not defined in this version: enough with the MIB counters that have been added in this commit. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman commit 609937aa962a62e93acfc04dd370b665e6152dfb Author: Geliang Tang Date: Sat Oct 19 12:29:07 2024 +0200 mptcp: track and update contiguous data status commit 0530020a7c8f2204e784f0dbdc882bbd961fdbde upstream. This patch adds a new member allow_infinite_fallback in mptcp_sock, which is initialized to 'true' when the connection begins and is set to 'false' on any retransmit or successful MP_JOIN. Only do infinite mapping fallback if there is a single subflow AND there have been no retransmissions AND there have never been any MP_JOINs. Suggested-by: Paolo Abeni Signed-off-by: Geliang Tang Signed-off-by: Mat Martineau Signed-off-by: David S. Miller Stable-dep-of: e32d262c89e2 ("mptcp: handle consistently DSS corruption") [ Conflicts in protocol.c, because commit 3e5014909b56 ("mptcp: cleanup MPJ subflow list handling") is not in this version. This commit is linked to a new feature, changing the context around. The new line can still be added at the same place. Conflicts in protocol.h, because commit 4f6e14bd19d6 ("mptcp: support TCP_CORK and TCP_NODELAY") is not in this version. This commit is linked to a new feature, changing the context around. The new line can still be added at the same place. Conflicts in subflow.c, because commit 0348c690ed37 ("mptcp: add the fallback check") is not in this version. This commit is linked to a new feature, changing the context around. The new line can still be added at the same place. Extra conflicts in v5.10, because the context has been changed. ] Signed-off-by: Matthieu Baerts (NGI0) Signed-off-by: Greg Kroah-Hartman commit b7d7b7fc876f836f40bf48a87e07ea18756ba196 Author: Marc Zyngier Date: Wed Oct 2 21:49:59 2024 +0100 irqchip/gic-v4: Don't allow a VMOVP on a dying VPE commit 1442ee0011983f0c5c4b92380e6853afb513841a upstream. Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor. Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP") Reported-by: Kunkun Jiang Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/c182ece6-2ba0-ce4f-3404-dba7a3ab6c52@huawei.com Link: https://lore.kernel.org/all/20241002204959.2051709-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman commit 6f44a5fc15b5cece0785bc07453db77d99b0a6de Author: Pawan Gupta Date: Wed Sep 25 15:25:44 2024 -0700 x86/entry_32: Clear CPU buffers after register restore in NMI return commit 48a2440d0f20c826b884e04377ccc1e4696c84e9 upstream. CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data. Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition") Suggested-by: Dave Hansen Signed-off-by: Pawan Gupta Signed-off-by: Dave Hansen Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-2-1de0daca2d42%40linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 9ab38a1cdb66b10688e07c6eea0b23e913168de1 Author: Pawan Gupta Date: Wed Sep 25 15:25:38 2024 -0700 x86/entry_32: Do not clobber user EFLAGS.ZF commit 2e2e5143d4868163d6756c8c6a4d28cbfa5245e5 upstream. Opportunistic SYSEXIT executes VERW to clear CPU buffers after user EFLAGS are restored. This can clobber user EFLAGS.ZF. Move CLEAR_CPU_BUFFERS before the user EFLAGS are restored. This ensures that the user EFLAGS.ZF is not clobbered. Closes: https://lore.kernel.org/lkml/yVXwe8gvgmPADpRB6lXlicS2fcHoV5OHHxyuFbB_MEleRPD7-KhGe5VtORejtPe-KCkT8Uhcg5d7-IBw4Ojb4H7z5LQxoZylSmJ8KNL3A8o=@protonmail.com/ Fixes: a0e2dab44d22 ("x86/entry_32: Add VERW just before userspace transition") Reported-by: Jari Ruusu Signed-off-by: Pawan Gupta Signed-off-by: Dave Hansen Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20240925-fix-dosemu-vm86-v7-1-1de0daca2d42%40linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 84628057885539edbbd9656c40336d9d89cf21fb Author: Zhang Rui Date: Tue Oct 15 14:15:22 2024 +0800 x86/apic: Always explicitly disarm TSC-deadline timer commit ffd95846c6ec6cf1f93da411ea10d504036cab42 upstream. New processors have become pickier about the local APIC timer state before entering low power modes. These low power modes are used (for example) when you close your laptop lid and suspend. If you put your laptop in a bag and it is not in this low power mode, it is likely to get quite toasty while it quickly sucks the battery dry. The problem boils down to some CPUs' inability to power down until the CPU recognizes that the local APIC timer is shut down. The current kernel code works in one-shot and periodic modes but does not work for deadline mode. Deadline mode has been the supported and preferred mode on Intel CPUs for over a decade and uses an MSR to drive the timer instead of an APIC register. Disable the TSC Deadline timer in lapic_timer_shutdown() by writing to MSR_IA32_TSC_DEADLINE when in TSC-deadline mode. Also avoid writing to the initial-count register (APIC_TMICT) which is ignored in TSC-deadline mode. Note: The APIC_LVTT|=APIC_LVT_MASKED operation should theoretically be enough to tell the hardware that the timer will not fire in any of the timer modes. But mitigating AMD erratum 411[1] also requires clearing out APIC_TMICT. Solely setting APIC_LVT_MASKED is also ineffective in practice on Intel Lunar Lake systems, which is the motivation for this change. 1. 411 Processor May Exit Message-Triggered C1E State Without an Interrupt if Local APIC Timer Reaches Zero - https://www.amd.com/content/dam/amd/en/documents/archived-tech-docs/revision-guides/41322_10h_Rev_Gd.pdf Fixes: 279f1461432c ("x86: apic: Use tsc deadline for oneshot when available") Suggested-by: Dave Hansen Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Reviewed-by: Rafael J. Wysocki Tested-by: Srinivas Pandruvada Tested-by: Todd Brandt Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241015061522.25288-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman commit e475220d64befa9cbc9a23d627cba33da0edf1a9 Author: Nathan Chancellor Date: Tue Sep 17 09:02:53 2024 -0700 x86/resctrl: Annotate get_mem_config() functions as __init commit d5fd042bf4cfb557981d65628e1779a492cd8cfa upstream. After a recent LLVM change [1] that deduces __cold on functions that only call cold code (such as __init functions), there is a section mismatch warning from __get_mem_config_intel(), which got moved to .text.unlikely. as a result of that optimization: WARNING: modpost: vmlinux: section mismatch in reference: \ __get_mem_config_intel+0x77 (section: .text.unlikely.) -> thread_throttle_mode_init (section: .init.text) Mark __get_mem_config_intel() as __init as well since it is only called from __init code, which clears up the warning. While __rdt_get_mem_config_amd() does not exhibit a warning because it does not call any __init code, it is a similar function that is only called from __init code like __get_mem_config_intel(), so mark it __init as well to keep the code symmetrical. CONFIG_SECTION_MISMATCH_WARN_ONLY=n would turn this into a fatal error. Fixes: 05b93417ce5b ("x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)") Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Nathan Chancellor Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Reinette Chatre Cc: Link: https://github.com/llvm/llvm-project/commit/6b11573b8c5e3d36beee099dbe7347c2a007bf53 [1] Link: https://lore.kernel.org/r/20240917-x86-restctrl-get_mem_config_intel-init-v3-1-10d521256284@kernel.org Signed-off-by: Greg Kroah-Hartman commit 1826b6d69bbb7f9ae8711827facbb2ad7f8d0aaa Author: Takashi Iwai Date: Fri Sep 20 12:32:19 2024 +0200 parport: Proper fix for array out-of-bounds access commit 02ac3a9ef3a18b58d8f3ea2b6e46de657bf6c4f9 upstream. The recent fix for array out-of-bounds accesses replaced sprintf() calls blindly with snprintf(). However, since snprintf() returns the would-be-printed size, not the actually output size, the length calculation can still go over the given limit. Use scnprintf() instead of snprintf(), which returns the actually output letters, for addressing the potential out-of-bounds access properly. Fixes: ab11dac93d2d ("dev/parport: fix the array out-of-bounds risk") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/r/20240920103318.19271-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman commit 9f8ddf14fa790fe598e5cdfa532e8d02543fe613 Author: Daniele Palmas Date: Thu Oct 3 11:38:08 2024 +0200 USB: serial: option: add Telit FN920C04 MBIM compositions commit 6d951576ee16430822a8dee1e5c54d160e1de87d upstream. Add the following Telit FN920C04 compositions: 0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a7 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10aa Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 0fc55ec9fcacf80779e4222abc5d4a8bd4b50cd6 Author: Benjamin B. Frost Date: Wed Sep 11 10:54:05 2024 +0200 USB: serial: option: add support for Quectel EG916Q-GL commit 540eff5d7faf0c9330ec762da49df453263f7676 upstream. Add Quectel EM916Q-GL with product ID 0x6007 T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6007 Rev= 2.00 S: Manufacturer=Quectel S: Product=EG916Q-GL C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms MI_00 Quectel USB Diag Port MI_01 Quectel USB NMEA Port MI_02 Quectel USB AT Port MI_03 Quectel USB Modem Port MI_04 Quectel USB Net Port Signed-off-by: Benjamin B. Frost Reviewed-by: Lars Melin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 608b626f710dfbba39ed732ae43b4752133a2781 Author: Mathias Nyman Date: Wed Oct 16 16:59:57 2024 +0300 xhci: Fix incorrect stream context type macro commit 6599b6a6fa8060145046d0744456b6abdb3122a7 upstream. The stream contex type (SCT) bitfield is used both in the stream context data structure, and in the 'Set TR Dequeue pointer' command TRB. In both cases it uses bits 3:1 The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value 1 bit left before masking the three bits. Fix this by first masking and rshifting, just like the similar SCT_FOR_CTX(p) macro does This issue has not been visibile as the lost bit 3 is only used with secondary stream arrays (SSA). Xhci driver currently only supports using a primary stream array with Linear stream addressing. Fixes: 95241dbdf828 ("xhci: Set SCT field for Set TR dequeue on streams") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit fc2cb5e3af533262c585c32f7e6052f72ee9247c Author: Luiz Augusto von Dentz Date: Wed Oct 16 11:47:00 2024 -0400 Bluetooth: btusb: Fix regression with fake CSR controllers 0a12:0001 commit 2c1dda2acc4192d826e84008d963b528e24d12bc upstream. Fake CSR controllers don't seem to handle short-transfer properly which cause command to time out: kernel: usb 1-1: new full-speed USB device number 19 using xhci_hcd kernel: usb 1-1: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 kernel: usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 kernel: usb 1-1: Product: BT DONGLE10 ... Bluetooth: hci1: Opcode 0x1004 failed: -110 kernel: Bluetooth: hci1: command 0x1004 tx timeout According to USB Spec 2.0 Section 5.7.3 Interrupt Transfer Packet Size Constraints a interrupt transfer is considered complete when the size is 0 (ZPL) or < wMaxPacketSize: 'When an interrupt transfer involves more data than can fit in one data payload of the currently established maximum size, all data payloads are required to be maximum-sized except for the last data payload, which will contain the remaining data. An interrupt transfer is complete when the endpoint does one of the following: • Has transferred exactly the amount of data expected • Transfers a packet with a payload size less than wMaxPacketSize or transfers a zero-length packet' Link: https://bugzilla.kernel.org/show_bug.cgi?id=219365 Fixes: 7b05933340f4 ("Bluetooth: btusb: Fix not handling ZPL/short-transfer") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 63d6a3b078382bae2a055857ac8963aafee7e3e6 Author: Aaron Thompson Date: Fri Oct 4 23:04:10 2024 +0000 Bluetooth: Remove debugfs directory on module init failure commit 1db4564f101b47188c1b71696bd342ef09172b22 upstream. If bt_init() fails, the debugfs directory currently is not removed. If the module is loaded again after that, the debugfs directory is not set up properly due to the existing directory. # modprobe bluetooth # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:26 ./ drwx------ 31 root root 0 Sep 27 14:25 ../ -r--r--r-- 1 root root 0 Sep 27 14:26 l2cap -r--r--r-- 1 root root 0 Sep 27 14:26 sco # modprobe -r bluetooth # ls -laF /sys/kernel/debug/bluetooth ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory # # modprobe bluetooth modprobe: ERROR: could not insert 'bluetooth': Invalid argument # dmesg | tail -n 6 Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Faking l2cap_init() failure for testing NET: Unregistered PF_BLUETOOTH protocol family # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # # modprobe bluetooth # dmesg | tail -n 7 Bluetooth: Core ver 2.22 debugfs: Directory 'bluetooth' with parent '/' already present! NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # Cc: stable@vger.kernel.org Fixes: ffcecac6a738 ("Bluetooth: Create root debugfs directory during module init") Signed-off-by: Aaron Thompson Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman commit 516655749a0143d5878d7f9458e0a3935543fb0f Author: Javier Carrasco Date: Thu Oct 3 23:04:49 2024 +0200 iio: adc: ti-ads124s08: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit eb143d05def52bc6d193e813018e5fa1a0e47c77 upstream. This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-iio-select-v1-3-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit f80375f275fbc7c3898723d9101597d3ec6bff08 Author: Javier Carrasco Date: Thu Oct 3 23:04:59 2024 +0200 iio: proximity: mb1232: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit 75461a0b15d7c026924d0001abce0476bbc7eda8 upstream. This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-iio-select-v1-13-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit dc99dfa2ba6661a2f3b02a5c7b710e077761cacf Author: Emil Gedenryd Date: Fri Sep 13 11:57:02 2024 +0200 iio: light: opt3001: add missing full-scale range value commit 530688e39c644543b71bdd9cb45fdfb458a28eaa upstream. The opt3001 driver uses predetermined full-scale range values to determine what exponent to use for event trigger threshold values. The problem is that one of the values specified in the datasheet is missing from the implementation. This causes larger values to be scaled down to an incorrect exponent, effectively reducing the maximum settable threshold value by a factor of 2. Add missing full-scale range array value. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Signed-off-by: Emil Gedenryd Cc: Link: https://patch.msgid.link/20240913-add_opt3002-v2-1-69e04f840360@axis.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit bf3ab8e1c28f10df0823d4ff312f83c952b06a15 Author: Javier Carrasco Date: Fri Sep 13 15:18:58 2024 +0200 iio: light: veml6030: fix IIO device retrieval from embedded device commit c7c44e57750c31de43906d97813273fdffcf7d02 upstream. The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again. Cc: stable@vger.kernel.org Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20240913-veml6035-v1-3-0b09c0c90418@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 2d06787b70d89340a2f00d80a7bd08883c4c099f Author: Javier Carrasco Date: Mon Sep 23 00:17:49 2024 +0200 iio: light: veml6030: fix ALS sensor resolution commit c9e9746f275c45108f2b0633a4855d65d9ae0736 upstream. The driver still uses the sensor resolution provided in the datasheet until Rev. 1.6, 28-Apr-2022, which was updated with Rev 1.7, 28-Nov-2023. The original ambient light resolution has been updated from 0.0036 lx/ct to 0.0042 lx/ct, which is the value that can be found in the current device datasheet. Update the default resolution for IT = 100 ms and GAIN = 1/8 from the original 4608 mlux/cnt to the current value from the "Resolution and maximum detection range" table (Application Note 84367, page 5), 5376 mlux/cnt. Cc: Fixes: 7b779f573c48 ("iio: light: add driver for veml6030 ambient light sensor") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20240923-veml6035-v2-1-58c72a0df31c@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit ffc4174309a9429ec8dffd48c761896d2fc353e7 Author: Christophe JAILLET Date: Thu Oct 3 20:41:12 2024 +0200 iio: hid-sensors: Fix an error handling path in _hid_sensor_set_report_latency() commit 3a29b84cf7fbf912a6ab1b9c886746f02b74ea25 upstream. If hid_sensor_set_report_latency() fails, the error code should be returned instead of a value likely to be interpreted as 'success'. Fixes: 138bc7969c24 ("iio: hid-sensor-hub: Implement batch mode") Signed-off-by: Christophe JAILLET Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/c50640665f091a04086e5092cf50f73f2055107a.1727980825.git.christophe.jaillet@wanadoo.fr Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 9504153a480f84756f86c379eca91a98e83b576f Author: Javier Carrasco Date: Thu Oct 3 23:04:50 2024 +0200 iio: adc: ti-ads8688: add missing select IIO_(TRIGGERED_)BUFFER in Kconfig commit 4c4834fd8696a949d1b1f1c2c5b96e1ad2083b02 upstream. This driver makes use of triggered buffers, but does not select the required modules. Fixes: 2a86487786b5 ("iio: adc: ti-ads8688: add trigger and buffer support") Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Signed-off-by: Javier Carrasco Reviewed-by: Sean Nyekjaer Link: https://patch.msgid.link/20241003-iio-select-v1-4-67c0385197cd@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c27133637aba67367056b7d0cad10bed5afb7d00 Author: Javier Carrasco Date: Thu Oct 3 18:49:40 2024 +0200 iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in Kconfig commit 27b6aa68a68105086aef9f0cb541cd688e5edea8 upstream. This driver makes use of regmap_mmio, but does not select the required module. Add the missing 'select REGMAP_MMIO'. Fixes: 4d4b30526eb8 ("iio: dac: add support for stm32 DAC") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-8-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit c4c2211b1202ab3fdfc421b747a1c83a4e457442 Author: Javier Carrasco Date: Thu Oct 3 18:49:39 2024 +0200 iio: dac: ltc1660: add missing select REGMAP_SPI in Kconfig commit 252ff06a4cb4e572cb3c7fcfa697db96b08a7781 upstream. This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: 8316cebd1e59 ("iio: dac: add support for ltc1660") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-7-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 3abc1ebea3fb1b62c3f7c40ae6605c0e42b335e1 Author: Javier Carrasco Date: Thu Oct 3 18:49:38 2024 +0200 iio: dac: ad5770r: add missing select REGMAP_SPI in Kconfig commit bcdab6f74c91cda19714354fd4e9e3ef3c9a78b3 upstream. This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support") Signed-off-by: Javier Carrasco Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-6-4019453f8c33@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 0782809c019b9a406f3577d609ecdbec5c973532 Author: Nikolay Kuratov Date: Wed Oct 2 15:24:29 2024 +0300 drm/vmwgfx: Handle surface check failure correctly commit 26498b8d54373d31a621d7dec95c4bd842563b3b upstream. Currently if condition (!bo and !vmw_kms_srf_ok()) was met we go to err_out with ret == 0. err_out dereferences vfb if ret == 0, but in our case vfb is still NULL. Fix this by assigning sensible error to ret. Found by Linux Verification Center (linuxtesting.org) with SVACE Signed-off-by: Nikolay Kuratov Cc: stable@vger.kernel.org Fixes: 810b3e1683d0 ("drm/vmwgfx: Support topology greater than texture size") Signed-off-by: Zack Rusin Link: https://patchwork.freedesktop.org/patch/msgid/20241002122429.1981822-1-kniv@yandex-team.ru Signed-off-by: Greg Kroah-Hartman commit df75c78bfeff99f9b4815c3e79e2b1b1e34fe264 Author: Ville Syrjälä Date: Mon Oct 14 19:09:36 2024 +0300 drm/radeon: Fix encoder->possible_clones commit 28127dba64d8ae1a0b737b973d6d029908599611 upstream. Include the encoder itself in its possible_clones bitmask. In the past nothing validated that drivers were populating possible_clones correctly, but that changed in commit 74d2aacbe840 ("drm: Validate encoder->possible_clones"). Looks like radeon never got the memo and is still not following the rules 100% correctly. This results in some warnings during driver initialization: Bogus possible_clones: [ENCODER:46:TV-46] possible_clones=0x4 (full encoder mask=0x7) WARNING: CPU: 0 PID: 170 at drivers/gpu/drm/drm_mode_config.c:615 drm_mode_config_validate+0x113/0x39c ... Cc: Alex Deucher Cc: amd-gfx@lists.freedesktop.org Fixes: 74d2aacbe840 ("drm: Validate encoder->possible_clones") Reported-by: Erhard Furtner Closes: https://lore.kernel.org/dri-devel/20241009000321.418e4294@yea/ Tested-by: Erhard Furtner Signed-off-by: Ville Syrjälä Signed-off-by: Alex Deucher (cherry picked from commit 3b6e7d40649c0d75572039aff9d0911864c689db) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 6ddcaee244ffd9ede3a985362d03f9538f97fb90 Author: Jens Axboe Date: Tue Oct 15 08:58:25 2024 -0600 io_uring/sqpoll: close race on waiting for sqring entries commit 28aabffae6be54284869a91cd8bccd3720041129 upstream. When an application uses SQPOLL, it must wait for the SQPOLL thread to consume SQE entries, if it fails to get an sqe when calling io_uring_get_sqe(). It can do so by calling io_uring_enter(2) with the flag value of IORING_ENTER_SQ_WAIT. In liburing, this is generally done with io_uring_sqring_wait(). There's a natural expectation that once this call returns, a new SQE entry can be retrieved, filled out, and submitted. However, the kernel uses the cached sq head to determine if the SQRING is full or not. If the SQPOLL thread is currently in the process of submitting SQE entries, it may have updated the cached sq head, but not yet committed it to the SQ ring. Hence the kernel may find that there are SQE entries ready to be consumed, and return successfully to the application. If the SQPOLL thread hasn't yet committed the SQ ring entries by the time the application returns to userspace and attempts to get a new SQE, it will fail getting a new SQE. Fix this by having io_sqring_full() always use the user visible SQ ring head entry, rather than the internally cached one. Cc: stable@vger.kernel.org # 5.10+ Link: https://github.com/axboe/liburing/discussions/1267 Reported-by: Benedek Thaler Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 3bc6d0f8b70a9101456cf02ab99acb75254e1852 Author: Omar Sandoval Date: Tue Oct 15 10:59:46 2024 -0700 blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race commit e972b08b91ef48488bae9789f03cfedb148667fb upstream. We're seeing crashes from rq_qos_wake_function that look like this: BUG: unable to handle page fault for address: ffffafe180a40084 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40 Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00 RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084 RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011 R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002 R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: try_to_wake_up+0x5a/0x6a0 rq_qos_wake_function+0x71/0x80 __wake_up_common+0x75/0xa0 __wake_up+0x36/0x60 scale_up.part.0+0x50/0x110 wb_timer_fn+0x227/0x450 ... So rq_qos_wake_function() calls wake_up_process(data->task), which calls try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock). p comes from data->task, and data comes from the waitqueue entry, which is stored on the waiter's stack in rq_qos_wait(). Analyzing the core dump with drgn, I found that the waiter had already woken up and moved on to a completely unrelated code path, clobbering what was previously data->task. Meanwhile, the waker was passing the clobbered garbage in data->task to wake_up_process(), leading to the crash. What's happening is that in between rq_qos_wake_function() deleting the waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding that it already got a token and returning. The race looks like this: rq_qos_wait() rq_qos_wake_function() ============================================================== prepare_to_wait_exclusive() data->got_token = true; list_del_init(&curr->entry); if (data.got_token) break; finish_wait(&rqw->wait, &data.wq); ^- returns immediately because list_empty_careful(&wq_entry->entry) is true ... return, go do something else ... wake_up_process(data->task) (NO LONGER VALID!)-^ Normally, finish_wait() is supposed to synchronize against the waker. But, as noted above, it is returning immediately because the waitqueue entry has already been removed from the waitqueue. The bug is that rq_qos_wake_function() is accessing the waitqueue entry AFTER deleting it. Note that autoremove_wake_function() wakes the waiter and THEN deletes the waitqueue entry, which is the proper order. Fix it by swapping the order. We also need to use list_del_init_careful() to match the list_empty_careful() in finish_wait(). Fixes: 38cfb5a45ee0 ("blk-wbt: improve waking of tasks") Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval Acked-by: Tejun Heo Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit eca3edf87679284a5823c8930a059da0c2ed06ac Author: Johannes Wikner Date: Tue Oct 8 12:58:03 2024 +0200 x86/bugs: Do not use UNTRAIN_RET with IBPB on entry commit c62fa117c32bd1abed9304c58e0da6940f8c7fc2 upstream. Since X86_FEATURE_ENTRY_IBPB will invalidate all harmful predictions with IBPB, no software-based untraining of returns is needed anymore. Currently, this change affects retbleed and SRSO mitigations so if either of the mitigations is doing IBPB and the other one does the software sequence, the latter is not needed anymore. [ bp: Massage commit message. ] Suggested-by: Borislav Petkov Signed-off-by: Johannes Wikner Cc: Signed-off-by: Greg Kroah-Hartman commit e7c0f8ca3bddef44aaab2aafc22c64d0e0f66165 Author: Johannes Wikner Date: Tue Oct 8 12:36:30 2024 +0200 x86/bugs: Skip RSB fill at VMEXIT commit 0fad2878642ec46225af2054564932745ac5c765 upstream. entry_ibpb() is designed to follow Intel's IBPB specification regardless of CPU. This includes invalidating RSB entries. Hence, if IBPB on VMEXIT has been selected, entry_ibpb() as part of the RET untraining in the VMEXIT path will take care of all BTB and RSB clearing so there's no need to explicitly fill the RSB anymore. [ bp: Massage commit message. ] Suggested-by: Borislav Petkov Signed-off-by: Johannes Wikner Cc: Signed-off-by: Greg Kroah-Hartman commit 0ab77a47e3ff18889ebdb377b7ce9857008d9e80 Author: Johannes Wikner Date: Mon Sep 23 20:49:36 2024 +0200 x86/entry: Have entry_ibpb() invalidate return predictions commit 50e4b3b94090babe8d4bb85c95f0d3e6b07ea86e upstream. entry_ibpb() should invalidate all indirect predictions, including return target predictions. Not all IBPB implementations do this, in which case the fallback is RSB filling. Prevent SRSO-style hijacks of return predictions following IBPB, as the return target predictor can be corrupted before the IBPB completes. [ bp: Massage. ] Signed-off-by: Johannes Wikner Signed-off-by: Borislav Petkov (AMD) Cc: Signed-off-by: Greg Kroah-Hartman commit c5e57863d79053067a6bdb0aaf800513e6eb40b7 Author: Johannes Wikner Date: Mon Sep 23 20:49:34 2024 +0200 x86/cpufeatures: Add a IBPB_NO_RET BUG flag commit 3ea87dfa31a7b0bb0ff1675e67b9e54883013074 upstream. Set this flag if the CPU has an IBPB implementation that does not invalidate return target predictions. Zen generations < 4 do not flush the RSB when executing an IBPB and this bug flag denotes that. [ bp: Massage. ] Signed-off-by: Johannes Wikner Signed-off-by: Borislav Petkov (AMD) Cc: Signed-off-by: Greg Kroah-Hartman commit 77fa26062032908798c23a9270ddac580a11e8c7 Author: Jim Mattson Date: Fri Sep 13 10:32:27 2024 -0700 x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET commit ff898623af2ed564300752bba83a680a1e4fec8d upstream. AMD's initial implementation of IBPB did not clear the return address predictor. Beginning with Zen4, AMD's IBPB *does* clear the return address predictor. This behavior is enumerated by CPUID.80000008H:EBX.IBPB_RET[30]. Define X86_FEATURE_AMD_IBPB_RET for use in KVM_GET_SUPPORTED_CPUID, when determining cross-vendor capabilities. Suggested-by: Venkatesh Srinivas Signed-off-by: Jim Mattson Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Tom Lendacky Reviewed-by: Thomas Gleixner Cc: Signed-off-by: Greg Kroah-Hartman commit dfa4b5d4ba1cf7488ff0fa41ac1ddd667c5e3425 Author: Michael Mueller Date: Tue Sep 17 17:18:34 2024 +0200 KVM: s390: Change virtual to physical address access in diag 0x258 handler commit cad4b3d4ab1f062708fff33f44d246853f51e966 upstream. The parameters for the diag 0x258 are real addresses, not virtual, but KVM was using them as virtual addresses. This only happened to work, since the Linux kernel as a guest used to have a 1:1 mapping for physical vs virtual addresses. Fix KVM so that it correctly uses the addresses as real addresses. Cc: stable@vger.kernel.org Fixes: 8ae04b8f500b ("KVM: s390: Guest's memory access functions get access registers") Suggested-by: Vasily Gorbik Signed-off-by: Michael Mueller Signed-off-by: Nico Boehr Reviewed-by: Christian Borntraeger Reviewed-by: Heiko Carstens Link: https://lore.kernel.org/r/20240917151904.74314-3-nrb@linux.ibm.com Acked-by: Janosch Frank Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit d047095095946451e2d07d8b4493e0578b951bdc Author: Thomas Weißschuh Date: Mon Oct 14 07:50:07 2024 +0200 s390/sclp_vt220: Convert newlines to CRLF instead of LFCR commit dee3df68ab4b00fff6bdf9fc39541729af37307c upstream. According to the VT220 specification the possible character combinations sent on RETURN are only CR or CRLF [0]. The Return key sends either a CR character (0/13) or a CR character (0/13) and an LF character (0/10), depending on the set/reset state of line feed/new line mode (LNM). The sclp/vt220 driver however uses LFCR. This can confuse tools, for example the kunit runner. Link: https://vt100.net/docs/vt220-rm/chapter3.html#S3.2 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh Reviewed-by: Sven Schnelle Link: https://lore.kernel.org/r/20241014-s390-kunit-v1-2-941defa765a6@linutronix.de Signed-off-by: Heiko Carstens Signed-off-by: Greg Kroah-Hartman commit b12ef2d4dfee3ca13258388868d9b78f3fae1c33 Author: Felix Moessbauer Date: Thu Oct 17 13:50:29 2024 +0200 io_uring/sqpoll: do not put cpumask on stack commit 7f44beadcc11adb98220556d2ddbe9c97aa6d42d upstream. Putting the cpumask on the stack is deprecated for a long time (since 2d3854a37e8), as these can be big. Given that, change the on-stack allocation of allowed_mask to be dynamically allocated. Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset") Signed-off-by: Felix Moessbauer Link: https://lore.kernel.org/r/20240916111150.1266191-1-felix.moessbauer@siemens.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 66b98c4f18b067984a2baac0fa9276bfc78d50b1 Author: Jens Axboe Date: Thu Oct 17 13:50:28 2024 +0200 io_uring/sqpoll: retain test for whether the CPU is valid commit a09c17240bdf2e9fa6d0591afa9448b59785f7d4 upstream. A recent commit ensured that SQPOLL cannot be setup with a CPU that isn't in the current tasks cpuset, but it also dropped testing whether the CPU is valid in the first place. Without that, if a task passes in a CPU value that is too high, the following KASAN splat can get triggered: BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4 Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391 CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace.part.0+0xcc/0xe0 show_stack+0x14/0x1c dump_stack_lvl+0x58/0x74 print_report+0x16c/0x4c8 kasan_report+0x9c/0xe4 __asan_report_load8_noabort+0x1c/0x24 io_sq_offload_create+0x858/0xaa4 io_uring_setup+0x1394/0x17c4 __arm64_sys_io_uring_setup+0x6c/0x180 invoke_syscall+0x6c/0x260 el0_svc_common.constprop.0+0x158/0x224 do_el0_svc+0x3c/0x5c el0_svc+0x34/0x70 el0t_64_sync_handler+0x118/0x124 el0t_64_sync+0x168/0x16c The buggy address belongs to stack of task wq-aff.t/1391 and is located at offset 48 in frame: io_sq_offload_create+0x0/0xaa4 This frame has 1 object: [32, 40) 'allowed_mask' The buggy address belongs to the virtual mapping at [ffff800089bc0000, ffff800089bc9000) created by: kernel_clone+0x124/0x7e0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a memcg:ffff0000c2706f02 flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff) raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 >ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset") Tested-by: Felix Moessbauer Signed-off-by: Jens Axboe Signed-off-by: Felix Moessbauer Signed-off-by: Greg Kroah-Hartman commit 54a987b41db3ac2953523fd0a640df9b901200a9 Author: Felix Moessbauer Date: Thu Oct 17 13:50:27 2024 +0200 io_uring/sqpoll: do not allow pinning outside of cpuset commit f011c9cf04c06f16b24f583d313d3c012e589e50 upstream. The submit queue polling threads are userland threads that just never exit to the userland. When creating the thread with IORING_SETUP_SQ_AFF, the affinity of the poller thread is set to the cpu specified in sq_thread_cpu. However, this CPU can be outside of the cpuset defined by the cgroup cpuset controller. This violates the rules defined by the cpuset controller and is a potential issue for realtime applications. In b7ed6d8ffd6 we fixed the default affinity of the poller thread, in case no explicit pinning is required by inheriting the one of the creating task. In case of explicit pinning, the check is more complicated, as also a cpu outside of the parent cpumask is allowed. We implemented this by using cpuset_cpus_allowed (that has support for cgroup cpusets) and testing if the requested cpu is in the set. Fixes: 37d1e2e3642e ("io_uring: move SQPOLL thread io-wq forked worker") Signed-off-by: Felix Moessbauer Link: https://lore.kernel.org/r/20240909150036.55921-1-felix.moessbauer@siemens.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 71fbc3af3dacb26c3aa2f30bb3ab05c44d082c84 Author: Breno Leitao Date: Fri May 10 02:23:52 2024 -0700 KVM: Fix a data race on last_boosted_vcpu in kvm_vcpu_on_spin() commit 49f683b41f28918df3e51ddc0d928cb2e934ccdb upstream. Use {READ,WRITE}_ONCE() to access kvm->last_boosted_vcpu to ensure the loads and stores are atomic. In the extremely unlikely scenario the compiler tears the stores, it's theoretically possible for KVM to attempt to get a vCPU using an out-of-bounds index, e.g. if the write is split into multiple 8-bit stores, and is paired with a 32-bit load on a VM with 257 vCPUs: CPU0 CPU1 last_boosted_vcpu = 0xff; (last_boosted_vcpu = 0x100) last_boosted_vcpu[15:8] = 0x01; i = (last_boosted_vcpu = 0x1ff) last_boosted_vcpu[7:0] = 0x00; vcpu = kvm->vcpu_array[0x1ff]; As detected by KCSAN: BUG: KCSAN: data-race in kvm_vcpu_on_spin [kvm] / kvm_vcpu_on_spin [kvm] write to 0xffffc90025a92344 of 4 bytes by task 4340 on cpu 16: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4112) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffffc90025a92344 of 4 bytes by task 4342 on cpu 4: kvm_vcpu_on_spin (arch/x86/kvm/../../../virt/kvm/kvm_main.c:4069) kvm handle_pause (arch/x86/kvm/vmx/vmx.c:5929) kvm_intel vmx_handle_exit (arch/x86/kvm/vmx/vmx.c:? arch/x86/kvm/vmx/vmx.c:6606) kvm_intel vcpu_run (arch/x86/kvm/x86.c:11107 arch/x86/kvm/x86.c:11211) kvm kvm_arch_vcpu_ioctl_run (arch/x86/kvm/x86.c:?) kvm kvm_vcpu_ioctl (arch/x86/kvm/../../../virt/kvm/kvm_main.c:?) kvm __se_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:904 fs/ioctl.c:890) __x64_sys_ioctl (fs/ioctl.c:890) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x00000012 -> 0x00000000 Fixes: 217ece6129f2 ("KVM: use yield_to instead of sleep in kvm_vcpu_on_spin") Cc: stable@vger.kernel.org Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240510092353.2261824-1-leitao@debian.org Signed-off-by: Sean Christopherson Signed-off-by: Saeed Mirzamohammadi Signed-off-by: Greg Kroah-Hartman commit e8e599a635066c50ac214c3e10858f1d37e03022 Author: Johannes Berg Date: Tue Sep 19 08:34:15 2023 +0200 wifi: mac80211: fix potential key use-after-free commit 31db78a4923ef5e2008f2eed321811ca79e7f71b upstream. When ieee80211_key_link() is called by ieee80211_gtk_rekey_add() but returns 0 due to KRACK protection (identical key reinstall), ieee80211_gtk_rekey_add() will still return a pointer into the key, in a potential use-after-free. This normally doesn't happen since it's only called by iwlwifi in case of WoWLAN rekey offload which has its own KRACK protection, but still better to fix, do that by returning an error code and converting that to success on the cfg80211 boundary only, leaving the error for bad callers of ieee80211_gtk_rekey_add(). Reported-by: Dan Carpenter Fixes: fdf7cb4185b6 ("mac80211: accept key reinstall without changing anything") Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin [ Sherry: bp to fix CVE-2023-52530, resolved minor conflicts in net/mac80211/cfg.c because of context change due to missing commit 23a5f0af6ff4 ("wifi: mac80211: remove cipher scheme support") ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")] Signed-off-by: Sherry Yang Signed-off-by: Greg Kroah-Hartman commit 417d5838ca73c6331ae2fe692fab6c25c00d9a0b Author: Liu Shixin Date: Tue Oct 15 09:45:21 2024 +0800 mm/swapfile: skip HugeTLB pages for unuse_vma commit 7528c4fb1237512ee18049f852f014eba80bbe8d upstream. I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The problem can be reproduced by the following steps: 1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory. 2. Swapout the above anonymous memory. 3. run swapoff and we will get a bad pud error in kernel message: mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7) We can tell that pud_clear_bad is called by pud_none_or_clear_bad in unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never be freed because we lost it from page table. We can skip HugeTLB pages for unuse_vma to fix it. Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com Fixes: 0fe6e20b9c4c ("hugetlb, rmap: add reverse mapping for hugepage") Signed-off-by: Liu Shixin Acked-by: Muchun Song Cc: Naoya Horiguchi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 043f055261638633afd94523568a371fd835b0fa Author: OGAWA Hirofumi Date: Fri Oct 4 15:03:49 2024 +0900 fat: fix uninitialized variable commit 963a7f4d3b90ee195b895ca06b95757fcba02d1a upstream. syszbot produced this with a corrupted fs image. In theory, however an IO error would trigger this also. This affects just an error report, so should not be a serious error. Link: https://lkml.kernel.org/r/87r08wjsnh.fsf@mail.parknet.co.jp Link: https://lkml.kernel.org/r/66ff2c95.050a0220.49194.03e9.GAE@google.com Signed-off-by: OGAWA Hirofumi Reported-by: syzbot+ef0d7bc412553291aa86@syzkaller.appspotmail.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit bf1a0222229d0d2a545a7620dd8c1f8b1640e924 Author: Nianyao Tang Date: Sat Apr 6 02:27:37 2024 +0000 irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1 commit 80e9963fb3b5509dfcabe9652d56bf4b35542055 upstream. As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19): "A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS command queue does not show the command as consumed until all of its effects are completed." Furthermore, VSYNC is allowed to deliver an SError when referencing a non existent VPE. By these definitions, a VMAPP followed by a VSYNC is a bug, as the later references a VPE that has been unmapped by the former. Fix it by eliding the VSYNC in this scenario. Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP") Signed-off-by: Nianyao Tang Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Reviewed-by: Zenghui Yu Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com Signed-off-by: Greg Kroah-Hartman commit cafa5942bd2df3d80e3eeb2deb4bc050f7761f3d Author: Oleksij Rempel Date: Sun Oct 13 07:29:16 2024 +0200 net: macb: Avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY commit d0c3601f2c4e12e7689b0f46ebc17525250ea8c3 upstream. A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node"). This delay was caused by the call to `mdiobus_register()` in cases where a fixed-link PHY was present. The MDIO bus registration triggered unnecessary PHY address scans, leading to a 20-second delay due to attempts to detect Clause 45 (C45) compatible PHYs, despite no MDIO bus being attached. The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node") was originally introduced to fix a regression caused by commit 7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings like: mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0 ... mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31 This patch reworks the logic to avoid registering and allocation of the MDIO bus when: - The device tree contains a fixed-link node. - There is no "mdio" child node in the device tree. If a child node named "mdio" exists, the MDIO bus will be registered to support PHYs attached to the MACB's MDIO bus. Otherwise, with only a fixed-link, the MDIO bus is skipped. Tested on a sama5d35 based system with a ksz8863 switch attached to macb0. Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node") Signed-off-by: Oleksij Rempel Cc: stable@vger.kernel.org Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit ce43c48cdc4d31229e91914e61d827c7047ae1d8 Author: Mark Rutland Date: Tue Oct 8 16:58:47 2024 +0100 arm64: probes: Fix simulate_ldr*_literal() commit 50f813e57601c22b6f26ced3193b9b94d70a2640 upstream. The simulate_ldr_literal() code always loads a 64-bit quantity, and when simulating a 32-bit load into a 'W' register, it discards the most significant 32 bits. For big-endian kernels this means that the relevant bits are discarded, and the value returned is the the subsequent 32 bits in memory (i.e. the value at addr + 4). Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a plain C load, which the compiler may tear or elide (e.g. if the target is the zero register). Today this doesn't happen to matter, but it may matter in future if trampoline code uses a LDR (literal) or LDRSW (literal). Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an appropriately-sized READ_ONCE() to perform the access, which avoids these problems. Fixes: 39a67d49ba35 ("arm64: kprobes instruction simulation support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 3728b4eb27910ffedd173018279a970705f2e03a Author: Mark Rutland Date: Tue Oct 8 16:58:46 2024 +0100 arm64: probes: Remove broken LDR (literal) uprobe support commit acc450aa07099d071b18174c22a1119c57da8227 upstream. The simulate_ldr_literal() and simulate_ldrsw_literal() functions are unsafe to use for uprobes. Both functions were originally written for use with kprobes, and access memory with plain C accesses. When uprobes was added, these were reused unmodified even though they cannot safely access user memory. There are three key problems: 1) The plain C accesses do not have corresponding extable entries, and thus if they encounter a fault the kernel will treat these as unintentional accesses to user memory, resulting in a BUG() which will kill the kernel thread, and likely lead to further issues (e.g. lockup or panic()). 2) The plain C accesses are subject to HW PAN and SW PAN, and so when either is in use, any attempt to simulate an access to user memory will fault. Thus neither simulate_ldr_literal() nor simulate_ldrsw_literal() can do anything useful when simulating a user instruction on any system with HW PAN or SW PAN. 3) The plain C accesses are privileged, as they run in kernel context, and in practice can access a small range of kernel virtual addresses. The instructions they simulate have a range of +/-1MiB, and since the simulated instructions must itself be a user instructions in the TTBR0 address range, these can address the final 1MiB of the TTBR1 acddress range by wrapping downwards from an address in the first 1MiB of the TTBR0 address range. In contemporary kernels the last 8MiB of TTBR1 address range is reserved, and accesses to this will always fault, meaning this is no worse than (1). Historically, it was theoretically possible for the linear map or vmemmap to spill into the final 8MiB of the TTBR1 address range, but in practice this is extremely unlikely to occur as this would require either: * Having enough physical memory to fill the entire linear map all the way to the final 1MiB of the TTBR1 address range. * Getting unlucky with KASLR randomization of the linear map such that the populated region happens to overlap with the last 1MiB of the TTBR address range. ... and in either case if we were to spill into the final page there would be larger problems as the final page would alias with error pointers. Practically speaking, (1) and (2) are the big issues. Given there have been no reports of problems since the broken code was introduced, it appears that no-one is relying on probing these instructions with uprobes. Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW (literal), limiting the use of simulate_ldr_literal() and simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR (literal) and LDRSW (literal) will be rejected as arm_probe_decode_insn() will return INSN_REJECTED. In future we can consider introducing working uprobes support for these instructions, but this will require more significant work. Fixes: 9842ceae9fa8 ("arm64: Add uprobe support") Cc: stable@vger.kernel.org Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Will Deacon Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit 673a1c5a2998acbd429d6286e6cad10f17f4f073 Author: Jinjie Ruan Date: Wed Oct 9 15:23:01 2024 +0800 posix-clock: Fix missing timespec64 check in pc_clock_settime() commit d8794ac20a299b647ba9958f6d657051fc51a540 upstream. As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. Cc: stable@vger.kernel.org Fixes: 0606f422b453 ("posix clocks: Introduce dynamic clocks") Acked-by: Richard Cochran Suggested-by: Andrew Lunn Suggested-by: Thomas Gleixner Signed-off-by: Jinjie Ruan Link: https://patch.msgid.link/20241009072302.1754567-2-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit dbe055567af88e8eb37899a22aedf80d48bc0614 Author: Wei Fang Date: Fri Oct 11 11:01:03 2024 +0800 net: enetc: add missing static descriptor and inline keyword commit 1d7b2ce43d2c22a21dadaf689cb36a69570346a6 upstream. Fix the build warnings when CONFIG_FSL_ENETC_MDIO is not enabled. The detailed warnings are shown as follows. include/linux/fsl/enetc_mdio.h:62:18: warning: no previous prototype for function 'enetc_hw_alloc' [-Wmissing-prototypes] 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ include/linux/fsl/enetc_mdio.h:62:1: note: declare 'static' if the function is not intended to be used outside of this translation unit 62 | struct enetc_hw *enetc_hw_alloc(struct device *dev, void __iomem *port_regs) | ^ | static 8 warnings generated. Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Cc: stable@vger.kernel.org Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202410102136.jQHZOcS4-lkp@intel.com/ Signed-off-by: Wei Fang Reviewed-by: Claudiu Manoil Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/20241011030103.392362-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5f47cdeeefd93ad1a61be56e4c9694875d587f60 Author: Vasiliy Kovalev Date: Wed Oct 9 16:42:48 2024 +0300 ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2 commit 9988844c457f6f17fb2e75aa000b6c3b1b673bb9 upstream. There is a problem with simultaneous audio output to headphones and speakers, and when headphones are turned off, the speakers also turn off and do not turn them on. However, it was found that if you boot linux immediately after windows, there are no such problems. When comparing alsa-info, the only difference is the different configuration of Node 0x1d: working conf. (windows): Pin-ctls: 0x80: HP not working (linux): Pin-ctls: 0xc0: OUT HP This patch disable the AC_PINCTL_OUT_EN bit of Node 0x1d and fixes the described problem. Signed-off-by: Vasiliy Kovalev Cc: Link: https://patch.msgid.link/20241009134248.662175-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman