commit ca4427ebc6269ed2c255db88dc6e7bd2036c3103 Author: Greg Kroah-Hartman Date: Wed Dec 20 15:44:42 2023 +0100 Linux 5.10.205 Link: https://lore.kernel.org/r/20231218135046.178317233@linuxfoundation.org Link: https://lore.kernel.org/r/20231219074407.947984749@linuxfoundation.org Tested-by: Dominique Martinet Tested-by: kernelci.org bot Tested-by: Salvatore Bonaccorso Tested-by: Pavel Machek (CIP) Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit 05c547e8427af1a7b2919a38a54c673e697cd44f Author: Naveen N Rao Date: Fri Dec 15 16:44:33 2023 +0530 powerpc/ftrace: Fix stack teardown in ftrace_no_trace commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream. Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") added use of a new stack frame on ftrace entry to fix stack unwind. However, the commit missed updating the offset used while tearing down the ftrace stack when ftrace is disabled. Fix the same. In addition, the commit missed saving the correct stack pointer in pt_regs. Update the same. Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Naveen N Rao Signed-off-by: Michael Ellerman Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org Signed-off-by: Greg Kroah-Hartman commit e30e62f0e17884b5723f64ba93e58a7efbda2cf4 Author: Naveen N Rao Date: Fri Dec 15 16:44:32 2023 +0530 powerpc/ftrace: Create a dummy stackframe to fix stack unwind commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream. With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to call into ftrace are emitted right at function entry. The instruction sequence used is minimal to reduce overhead. Crucially, a stackframe is not created for the function being traced. This breaks stack unwinding since the function being traced does not have a stackframe for itself. As such, it never shows up in the backtrace: /sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 4144 32 ftrace_call+0x4/0x44 1) 4112 432 get_page_from_freelist+0x26c/0x1ad0 2) 3680 496 __alloc_pages+0x290/0x1280 3) 3184 336 __folio_alloc+0x34/0x90 4) 2848 176 vma_alloc_folio+0xd8/0x540 5) 2672 272 __handle_mm_fault+0x700/0x1cc0 6) 2400 208 handle_mm_fault+0xf0/0x3f0 7) 2192 80 ___do_page_fault+0x3e4/0xbe0 8) 2112 160 do_page_fault+0x30/0xc0 9) 1952 256 data_access_common_virt+0x210/0x220 10) 1696 400 0xc00000000f16b100 11) 1296 384 load_elf_binary+0x804/0x1b80 12) 912 208 bprm_execve+0x2d8/0x7e0 13) 704 64 do_execveat_common+0x1d0/0x2f0 14) 640 160 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 Fix this by having ftrace create a dummy stackframe for the function being traced. With this, backtraces now capture the function being traced: /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 3888 32 _raw_spin_trylock+0x8/0x70 1) 3856 576 get_page_from_freelist+0x26c/0x1ad0 2) 3280 64 __alloc_pages+0x290/0x1280 3) 3216 336 __folio_alloc+0x34/0x90 4) 2880 176 vma_alloc_folio+0xd8/0x540 5) 2704 416 __handle_mm_fault+0x700/0x1cc0 6) 2288 96 handle_mm_fault+0xf0/0x3f0 7) 2192 48 ___do_page_fault+0x3e4/0xbe0 8) 2144 192 do_page_fault+0x30/0xc0 9) 1952 608 data_access_common_virt+0x210/0x220 10) 1344 16 0xc0000000334bbb50 11) 1328 416 load_elf_binary+0x804/0x1b80 12) 912 64 bprm_execve+0x2d8/0x7e0 13) 848 176 do_execveat_common+0x1d0/0x2f0 14) 672 192 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 This results in two additional stores in the ftrace entry code, but produces reliable backtraces. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org Signed-off-by: Naveen N Rao Signed-off-by: Michael Ellerman Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org Signed-off-by: Greg Kroah-Hartman commit 5a82cf64f8ad63caf6bf115642ce44ddbc64311e Author: Mazin Al Haddad Date: Tue Dec 12 11:17:21 2023 +0000 tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf() commit f16c6d2e58a4c2b972efcf9eb12390ee0ba3befb upstream A null pointer dereference can happen when attempting to access the "gsm->receive()" function in gsmld_receive_buf(). Currently, the code assumes that gsm->receive is only called after MUX activation. Since the gsmld_receive_buf() function can be accessed without the need to initialize the MUX, the gsm->receive() function will not be set and a NULL pointer dereference will occur. Fix this by avoiding the call to "gsm->receive()" in case the function is not initialized by adding a sanity check. Call Trace: gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861 tiocsti drivers/tty/tty_io.c:2293 [inline] tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://syzkaller.appspot.com/bug?id=bdf035c61447f8c6e0e6920315d577cb5cc35ac5 Fixes: 01aecd917114 ("tty: n_gsm: fix tty registration before control channel open") Reported-and-tested-by: syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com Signed-off-by: Mazin Al Haddad Link: https://lore.kernel.org/r/20220814015211.84180-1-mazinalhaddad05@gmail.com Signed-off-by: Gavrilov Ilia Signed-off-by: Greg Kroah-Hartman commit a11ea2c08f517798e0af9ebd2b7318bf7be9f609 Author: Jiri Slaby Date: Tue Dec 12 11:17:21 2023 +0000 tty: n_gsm, remove duplicates of parameters commit b93db97e1ca08e500305bc46b08c72e2232c4be1 upstream. dp, f, and i are only duplicates of gsmld_receive_buf's parameters. Use the parameters directly (cp, fp, and count) and delete these local variables. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210302062214.29627-41-jslaby@suse.cz Signed-off-by: Gavrilov Ilia Signed-off-by: Greg Kroah-Hartman commit b8faa754b523a845facdc83120b2ecd290d7fa6d Author: Daniel Starke Date: Tue Dec 12 11:17:21 2023 +0000 tty: n_gsm: fix tty registration before control channel open commit 01aecd917114577c423f07cec0d186ad007d76fc upstream. The current implementation registers/deregisters the user ttys at mux attach/detach. That means that the user devices are available before any control channel is open. However, user channel initialization requires an open control channel. Furthermore, the user is not informed if the mux restarts due to configuration changes. Put the registration/deregistration procedure into separate function to improve readability. Move registration to mux activation and deregistration to mux cleanup to keep the user devices only open as long as a control channel exists. The user will be informed via the device driver if the mux was reconfigured in a way that required a mux re-activation. This makes it necessary to add T2 initialization to gsmld_open() for the ldisc open code path (not the reconfiguration code path) to avoid deletion of an uninitialized T2 at mux cleanup. Fixes: d50f6dcaf22a ("tty: n_gsm: expose gsmtty device nodes at ldisc open time") Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220701061652.39604-2-daniel.starke@siemens.com Signed-off-by: Gavrilov Ilia Signed-off-by: Greg Kroah-Hartman commit 918ba07224e9e9a8bd8d375132be9a72e4cadc86 Author: Roy Luo Date: Tue Nov 28 22:17:56 2023 +0000 USB: gadget: core: adjust uevent timing on gadget unbind commit 73ea73affe8622bdf292de898da869d441da6a9d upstream. The KOBJ_CHANGE uevent is sent before gadget unbind is actually executed, resulting in inaccurate uevent emitted at incorrect timing (the uevent would have USB_UDC_DRIVER variable set while it would soon be removed). Move the KOBJ_CHANGE uevent to the end of the unbind function so that uevent is sent only after the change has been made. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") Cc: stable@vger.kernel.org Signed-off-by: Roy Luo Link: https://lore.kernel.org/r/20231128221756.2591158-1-royluo@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 20c2cb79a38c9470e855ce74a9c0ce4d09a98d14 Author: Steven Rostedt (Google) Date: Tue Dec 12 11:53:01 2023 -0500 ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs commit fff88fa0fbc7067ba46dde570912d63da42c59a9 upstream. Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit architectures. That is: static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set) { unsigned long cnt, top, bottom, msb; unsigned long cnt2, top2, bottom2, msb2; u64 val; /* The cmpxchg always fails if it interrupted an update */ if (!__rb_time_read(t, &val, &cnt2)) return false; if (val != expect) return false; <<<< interrupted here! cnt = local_read(&t->cnt); The problem is that the synchronization counter in the rb_time_t is read *after* the value of the timestamp is read. That means if an interrupt were to come in between the value being read and the counter being read, it can change the value and the counter and the interrupted process would be clueless about it! The counter needs to be read first and then the value. That way it is easy to tell if the value is stale or not. If the counter hasn't been updated, then the value is still good. Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/ Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Fixes: 10464b4aa605e ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit") Reported-by: Mathieu Desnoyers Reviewed-by: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 9f5bf009f77deb59159cc39f9fbdfa334fc0a193 Author: Steven Rostedt (Google) Date: Tue Dec 12 11:16:17 2023 -0500 ring-buffer: Fix writing to the buffer with max_data_size commit b3ae7b67b87fed771fa5bf95389df06b0433603e upstream. The maximum ring buffer data size is the maximum size of data that can be recorded on the ring buffer. Events must be smaller than the sub buffer data size minus any meta data. This size is checked before trying to allocate from the ring buffer because the allocation assumes that the size will fit on the sub buffer. The maximum size was calculated as the size of a sub buffer page (which is currently PAGE_SIZE minus the sub buffer header) minus the size of the meta data of an individual event. But it missed the possible adding of a time stamp for events that are added long enough apart that the event meta data can't hold the time delta. When an event is added that is greater than the current BUF_MAX_DATA_SIZE minus the size of a time stamp, but still less than or equal to BUF_MAX_DATA_SIZE, the ring buffer would go into an infinite loop, looking for a page that can hold the event. Luckily, there's a check for this loop and after 1000 iterations and a warning is emitted and the ring buffer is disabled. But this should never happen. This can happen when a large event is added first, or after a long period where an absolute timestamp is prefixed to the event, increasing its size by 8 bytes. This passes the check and then goes into the algorithm that causes the infinite loop. For events that are the first event on the sub-buffer, it does not need to add a timestamp, because the sub-buffer itself contains an absolute timestamp, and adding one is redundant. The fix is to check if the event is to be the first event on the sub-buffer, and if it is, then do not add a timestamp. This also fixes 32 bit adding a timestamp when a read of before_stamp or write_stamp is interrupted. There's still no need to add that timestamp if the event is going to be the first event on the sub buffer. Also, if the buffer has "time_stamp_abs" set, then also check if the length plus the timestamp is greater than the BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/all/20231212104549.58863438@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231212071837.5fdd6c13@gandalf.local.home Link: https://lore.kernel.org/linux-trace-kernel/20231212111617.39e02849@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: a4543a2fa9ef3 ("ring-buffer: Get timestamp after event is allocated") Fixes: 58fbc3c63275c ("ring-buffer: Consolidate add_timestamp to remove some branches") Reported-by: Kent Overstreet # (on IRC) Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 3e8055fc3b2193e59739da88393de6f43ec2f84d Author: Steven Rostedt (Google) Date: Tue Dec 12 07:25:58 2023 -0500 ring-buffer: Have saved event hold the entire event commit b049525855fdd0024881c9b14b8fbec61c3f53d3 upstream. For the ring buffer iterator (non-consuming read), the event needs to be copied into the iterator buffer to make sure that a writer does not overwrite it while the user is reading it. If a write happens during the copy, the buffer is simply discarded. But the temp buffer itself was not big enough. The allocation of the buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can be passed into the ring buffer and saved. But the temp buffer needs to hold the meta data as well. That would be BUF_PAGE_SIZE and not BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: 785888c544e04 ("ring-buffer: Have rb_iter_head_event() handle concurrent writer") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit d7a2939814277efe81aa39cf0b9516e3a4d12032 Author: Steven Rostedt (Google) Date: Sun Dec 10 22:54:47 2023 -0500 tracing: Update snapshot buffer on resize if it is allocated commit d06aff1cb13d2a0d52b48e605462518149c98c81 upstream. The snapshot buffer is to mimic the main buffer so that when a snapshot is needed, the snapshot and main buffer are swapped. When the snapshot buffer is allocated, it is set to the minimal size that the ring buffer may be at and still functional. When it is allocated it becomes the same size as the main ring buffer, and when the main ring buffer changes in size, it should do. Currently, the resize only updates the snapshot buffer if it's used by the current tracer (ie. the preemptirqsoff tracer). But it needs to be updated anytime it is allocated. When changing the size of the main buffer, instead of looking to see if the current tracer is utilizing the snapshot buffer, just check if it is allocated to know if it should be updated or not. Also fix typo in comment just above the code change. Link: https://lore.kernel.org/linux-trace-kernel/20231210225447.48476a6a@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions") Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit a3580b2bfe909dd3e56cc9db29de85f100f0e83a Author: Steven Rostedt (Google) Date: Sun Dec 10 22:12:50 2023 -0500 ring-buffer: Fix memory leak of free page commit 17d801758157bec93f26faaf5ff1a8b9a552d67a upstream. Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer. The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page. Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak. Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 5ffda6998be51a8abb11b911087ebdd83ddfe7c5 Author: Florent Revest Date: Wed Dec 6 13:37:18 2023 +0100 team: Fix use-after-free when an option instance allocation fails commit c12296bbecc488623b7d1932080e394d08f3226b upstream. In __team_options_register, team_options are allocated and appended to the team's option_list. If one option instance allocation fails, the "inst_rollback" cleanup path frees the previously allocated options but doesn't remove them from the team's option_list. This leaves dangling pointers that can be dereferenced later by other parts of the team driver that iterate over options. This patch fixes the cleanup path to remove the dangling pointers from the list. As far as I can tell, this uaf doesn't have much security implications since it would be fairly hard to exploit (an attacker would need to make the allocation of that specific small object fail) but it's still nice to fix. Cc: stable@vger.kernel.org Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Florent Revest Reviewed-by: Jiri Pirko Reviewed-by: Hangbin Liu Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 33fb8ac30c3ee1f14a9d95503ccb07d67e15d088 Author: James Houghton Date: Mon Dec 4 17:26:46 2023 +0000 arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify commit 3c0696076aad60a2f04c019761921954579e1b0e upstream. It is currently possible for a userspace application to enter an infinite page fault loop when using HugeTLB pages implemented with contiguous PTEs when HAFDBS is not available. This happens because: 1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean (PTE_DIRTY | PTE_RDONLY | PTE_WRITE). 2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling the memory access on a system without HAFDBS, we will get a page fault. 3. HugeTLB will check if it needs to update the dirty bits on the PTE. For contiguous PTEs, it will check to see if the pgprot bits need updating. In this case, HugeTLB wants to write a sequence of sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()), so it thinks no update is necessary. We can get the kernel to write a sw-dirty, hw-clean PTE with the following steps (showing the relevant VMA flags and pgprot bits): i. Create a valid, writable contiguous PTE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE ii. mprotect the VMA to PROT_NONE. VMA vmflags: VM_SHARED VMA pgprot bits: PTE_RDONLY PTE pgprot bits: PTE_DIRTY | PTE_RDONLY iii. mprotect the VMA back to PROT_READ | PROT_WRITE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY Make it impossible to create a writeable sw-dirty, hw-clean PTE with pte_modify(). Such a PTE should be impossible to create, and there may be places that assume that pte_dirty() implies pte_hw_dirty(). Signed-off-by: James Houghton Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags") Cc: Acked-by: Will Deacon Reviewed-by: Ryan Roberts Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com Signed-off-by: Catalin Marinas Signed-off-by: Greg Kroah-Hartman commit 26eeec522acaad86ed05da97db5ea7c72da96fb6 Author: Baokun Li Date: Mon Nov 27 14:33:13 2023 +0800 ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream. For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit 6e2628dfade502b5917e338cce87de728d221587 Author: Krzysztof Kozlowski Date: Fri Nov 24 19:01:36 2023 +0100 soundwire: stream: fix NULL pointer dereference for multi_link commit e199bf52ffda8f98f129728d57244a9cd9ad5623 upstream. If bus is marked as multi_link, but number of masters in the stream is not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >= bus->hw_sync_min_links), bank switching should not happen. The first part of do_bank_switch() code properly takes these conditions into account, but second part (sdw_ml_sync_bank_switch()) relies purely on bus->multi_link property. This is not balanced and leads to NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: wait_for_completion_timeout+0x124/0x1f0 do_bank_switch+0x370/0x6f8 sdw_prepare_stream+0x2d0/0x438 qcom_snd_sdw_prepare+0xa0/0x118 sm8450_snd_prepare+0x128/0x148 snd_soc_link_prepare+0x5c/0xe8 __soc_pcm_prepare+0x28/0x1ec dpcm_be_dai_prepare+0x1e0/0x2c0 dpcm_fe_dai_prepare+0x108/0x28c snd_pcm_do_prepare+0x44/0x68 snd_pcm_action_single+0x54/0xc0 snd_pcm_action_nonatomic+0xe4/0xec snd_pcm_prepare+0xc4/0x114 snd_pcm_common_ioctl+0x1154/0x1cc0 snd_pcm_ioctl+0x54/0x74 Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman commit 7ccfc078cd475d11b233288c3ae3d639f7c4ce1c Author: Mark Rutland Date: Fri Dec 15 11:24:50 2023 +0000 perf: Fix perf_event_validate_size() lockdep splat commit 7e2c1e4b34f07d9aa8937fab88359d4a0fce468e upstream. When lockdep is enabled, the for_each_sibling_event(sibling, event) macro checks that event->ctx->mutex is held. When creating a new group leader event, we call perf_event_validate_size() on a partially initialized event where event->ctx is NULL, and so when for_each_sibling_event() attempts to check event->ctx->mutex, we get a splat, as reported by Lucas De Marchi: WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080 This only happens for a new event which is its own group_leader, and in this case there cannot be any sibling events. Thus it's safe to skip the check for siblings, which avoids having to make invasive and ugly changes to for_each_sibling_event(). Avoid the splat by bailing out early when the new event is its own group_leader. Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()") Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/ Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/ Reported-by: Lucas De Marchi Reported-by: Pengfei Xu Signed-off-by: Mark Rutland Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman commit 5984306f6ce7b1f872df1c6d24fe227dbb584361 Author: Denis Benato Date: Fri Nov 17 14:15:55 2023 +1300 HID: hid-asus: add const to read-only outgoing usb buffer [ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ] In the function asus_kbd_set_report the parameter buf is read-only as it gets copied in a memory portion suitable for USB transfer, but the parameter is not marked as const: add the missing const and mark const immutable buffers passed to that function. Signed-off-by: Denis Benato Signed-off-by: Luke D. Jones Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit e9709a88a8ee67f383ee64d29e5c7be5e29e882a Author: Lech Perczak Date: Sat Nov 18 00:19:18 2023 +0100 net: usb: qmi_wwan: claim interface 4 for ZTE MF290 [ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ] Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork Signed-off-by: Lech Perczak Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 09c8ee5f9bb36aea2c5d90576fb7b38e33ddec06 Author: Linus Torvalds Date: Thu Nov 9 22:22:13 2023 -0800 asm-generic: qspinlock: fix queued_spin_value_unlocked() implementation [ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ] We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not. The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically". This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks. Cc: Guo Ren Cc: Ingo Molnar Cc: Waiman Long Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/ Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit f6a1bf42997853812461249ed2ca9f424b759d11 Author: Aoba K Date: Tue Nov 21 20:23:11 2023 +0800 HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad [ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ] Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device. The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX. Signed-off-by: Aoba K Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 744027bb8ee0ef5be9a49f4f9c2f22c5f9d49abe Author: Denis Benato Date: Fri Nov 17 14:15:56 2023 +1300 HID: hid-asus: reset the backlight brightness level on resume [ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ] Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user. Fix the above issue by setting back brightness to the level it had before entering a sleep state. Signed-off-by: Denis Benato Signed-off-by: Luke D. Jones Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 1ac7379d2e186c007ef6f84b6234f6a7a9e2402c Author: Oliver Neukum Date: Tue Nov 14 15:54:30 2023 +0100 HID: add ALWAYS_POLL quirk for Apple kb [ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ] These devices disconnect if suspended without remote wakeup. They can operate with the standard driver. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit a64a9f38ae3e401487ba60c6efb48f65fbc79271 Author: Brett Raye Date: Thu Nov 2 18:10:38 2023 -0700 HID: glorious: fix Glorious Model I HID report [ Upstream commit a5e913c25b6b2b6ae02acef6d9400645ac03dfdf ] The Glorious Model I mouse has a buggy HID report descriptor for its keyboard endpoint (used for programmable buttons). For report ID 2, there is a mismatch between Logical Minimum and Usage Minimum in the array that reports keycodes. The offending portion of the descriptor: (from hid-decode) 0x95, 0x05, // Report Count (5) 30 0x75, 0x08, // Report Size (8) 32 0x15, 0x00, // Logical Minimum (0) 34 0x25, 0x65, // Logical Maximum (101) 36 0x05, 0x07, // Usage Page (Keyboard) 38 0x19, 0x01, // Usage Minimum (1) 40 0x29, 0x65, // Usage Maximum (101) 42 0x81, 0x00, // Input (Data,Arr,Abs) 44 This bug shifts all programmed keycodes up by 1. Importantly, this causes "empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver. The presence of ErrorRollOver causes the system to ignore all keypresses from the endpoint and breaks the ability to use the programmable buttons. Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted correctly. Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH, and a new ID for Laview Technology is added. Glorious seems to be white-labeling controller boards or mice from these vendors. There isn't a single canonical vendor ID for Glorious products. Signed-off-by: Brett Raye Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 6026a862f351a67605e650c587e7b64e53173a54 Author: Andy Shevchenko Date: Mon Nov 20 17:07:56 2023 +0200 platform/x86: intel_telemetry: Fix kernel doc descriptions [ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ] LKP found issues with a kernel doc in the driver: core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig' It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com Reviewed-by: Rajneesh Bhardwaj Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit e01135763b9bff27c8e84820a9ddda6062647322 Author: Coly Li Date: Mon Nov 20 13:25:03 2023 +0800 bcache: avoid NULL checking to c->root in run_cache_set() [ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ] In run_cache_set() after c->root returned from bch_btree_node_get(), it is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL because bch_btree_node_get() will not return NULL pointer to caller. This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason. Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit a7555524e32520c35d2a3450c57e3418cd907955 Author: Coly Li Date: Mon Nov 20 13:25:02 2023 +0800 bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc() [ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ] This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines. Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 3b48e1c0485ada191e7a24822aa03842f3f6414a Author: Colin Ian King Date: Mon Nov 20 13:24:56 2023 +0800 bcache: remove redundant assignment to variable cur_idx [ Upstream commit be93825f0e6428c2d3f03a6e4d447dc48d33d7ff ] Variable cur_idx is being initialized with a value that is never read, it is being re-assigned later in a while-loop. Remove the redundant assignment. Cleans up clang scan build warning: drivers/md/bcache/writeback.c:916:2: warning: Value stored to 'cur_idx' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Reviewed-by: Coly Li Signed-off-by: Coly Li Link: https://lore.kernel.org/r/20231120052503.6122-4-colyli@suse.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit ea2341d08255fae1dd9886f477312c86d3d95840 Author: Coly Li Date: Mon Nov 20 13:24:54 2023 +0800 bcache: avoid oversize memory allocation by small stripe_size [ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ] Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are used for dirty data writeback, their sizes are decided by backing device capacity and stripe size. Larger backing device capacity or smaller stripe size make these two arraies occupies more dynamic memory space. Currently bcache->stripe_size is directly inherited from queue->limits.io_opt of underlying storage device. For normal hard drives, its limits.io_opt is 0, and bcache sets the corresponding stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for devices do declare value for queue->limits.io_opt, small stripe_size (comparing to 1TB) becomes an issue for oversize memory allocations of bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the capacity of hard drives gets much larger in recent decade. For example a raid5 array assembled by three 20TB hardrives, the raid device capacity is 40TB with typical 512KB limits.io_opt. After the math calculation in bcache code, these two arraies will occupy 400MB dynamic memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is declared on a new 2TB hard drive, then these two arraies request 2GB and 512MB dynamic memory from kzalloc(). The result is that bcache device always fails to initialize on his system. To avoid the oversize memory allocation, bcache->stripe_size should not directly inherited by queue->limits.io_opt from the underlying device. This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size and set bcache device's stripe size against the declared limits.io_opt value from the underlying storage device, - If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will set its stripe size directly by this limits.io_opt value. - If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will set its stripe size by a value multiplying limits.io_opt and euqal or large than BCH_MIN_STRIPE_SZ. Then the minimal stripe size of a bcache device will always be >= 4MB. For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied by these two arraies will be 2.5MB in total. Such mount of memory allocated for bcache->stripe_sectors_dirty and bcache->full_dirty_stripes is reasonable for most of storage devices. Reported-by: Andrea Tomassetti Signed-off-by: Coly Li Reviewed-by: Eric Wheeler Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit dbf0cdacdb4ebd68bf60dcd1a8b0d20dcdab1fbd Author: Ming Lei Date: Fri Nov 17 10:35:22 2023 +0800 blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!" [ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ] Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called. Fix the warning by adding rcu read lock. Reported-by: Changhui Zhong Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit d69581c17608d81824dd497d9a54b6a5b6139975 Author: Oliver Neukum Date: Wed Nov 15 11:08:57 2023 +0100 usb: aqc111: check packet for fixup for true limit [ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ] If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1e3ea8d2bad845e512ee3430323206d4f8ec9cc2 Author: Jason-JH.Lin Date: Wed Sep 20 17:06:58 2023 +0800 drm/mediatek: Add spinlock for setting vblank event in atomic_begin [ Upstream commit fe4c5f662097978b6c91c23a13c24ed92339a180 ] Add spinlock protection to avoid race condition on vblank event between mtk_drm_crtc_atomic_begin() and mtk_drm_finish_page_flip(). Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Jason-JH.Lin Suggested-by: AngeloGioacchino Del Regno Reviewed-by: Alexandre Mergnat Reviewed-by: Fei Shao Tested-by: Fei Shao Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20230920090658.31181-1-jason-jh.lin@mediatek.com/ Signed-off-by: Chun-Kuang Hu Signed-off-by: Sasha Levin commit 022b82336a620c12f77a6047aee2287d74d00fd4 Author: Jiaxun Yang Date: Fri Dec 1 11:50:28 2023 +0000 PCI: loongson: Limit MRRS to 256 commit ef61a0405742a9f7f6051bc6fd2f017d87d07911 upstream. This is a partial revert of 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") for MIPS-based Loongson. Some MIPS Loongson systems don't support arbitrary Max_Read_Request_Size (MRRS) settings. 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") worked around that by (1) assuming that firmware configured MRRS to the maximum supported value and (2) preventing the PCI core from increasing MRRS. Unfortunately, some firmware doesn't set that maximum MRRS correctly, which results in devices not being initialized correctly. One symptom, from the Debian report below, is this: ata4.00: exception Emask 0x0 SAct 0x20000000 SErr 0x0 action 0x6 frozen ata4.00: failed command: WRITE FPDMA QUEUED ata4.00: cmd 61/20:e8:00:f0:e1/00:00:00:00:00/40 tag 29 ncq dma 16384 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata4.00: status: { DRDY } ata4: hard resetting link Limit MRRS to 256 because MIPS Loongson with higher MRRS support is considered rare. This must be done at device enablement stage because the MRRS setting may get lost if PCI_COMMAND_MASTER on the parent bridge is cleared, and we are only sure parent bridge is enabled at this point. Fixes: 8b3517f88ff2 ("PCI: loongson: Prevent LS7A MRRS increases") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217680 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1035587 Link: https://lore.kernel.org/r/20231201115028.84351-1-jiaxun.yang@flygoat.com Signed-off-by: Jiaxun Yang Signed-off-by: Bjorn Helgaas Acked-by: Huacai Chen Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 791bca1b099696646c5174a5ad92b8a4d9f05b41 Author: Bjorn Helgaas Date: Thu Dec 14 09:08:56 2023 -0600 Revert "PCI: acpiphp: Reassign resources on bridge if necessary" commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream. This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas Acked-by: Michael S. Tsirkin Acked-by: Igor Mammedov Cc: Signed-off-by: Greg Kroah-Hartman commit 7e2afd08850628908c344f1375b0ebba85a1af5c Author: Hartmut Knaack Date: Sat Dec 9 15:47:07 2023 +0100 ALSA: hda/realtek: Apply mute LED quirk for HP15-db commit 9b726bf6ae11add6a7a52883a21f90ff9cbca916 upstream. The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute LED using COEF 0x07 index 1. Sound card subsystem: Hewlett-Packard Company Device [103c:84ae] Use the existing quirk for this model. Signed-off-by: Hartmut Knaack Cc: Link: https://lore.kernel.org/r/e61815d0-f1c7-b164-e49d-6ca84771476a@gmx.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 063302851147024f427144641122eb9df4cdb548 Author: Kai Vehmanen Date: Fri Dec 8 15:21:27 2023 +0200 ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants commit 924f5ca2975b2993ee81a7ecc3c809943a70f334 upstream. On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801 Cc: Ville Syrjälä Cc: Jani Saarinen Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 851783a0c4ffb87a8d8065f9bf286c2aa546a542 Author: Hangyu Hua Date: Thu Nov 16 15:57:26 2023 +0800 fuse: dax: set fc->dax to NULL in fuse_dax_conn_free() commit 7f8ed28d1401320bcb02dda81b3c23ab2dc5a6d8 upstream. fuse_dax_conn_free() will be called when fuse_fill_super_common() fails after fuse_dax_conn_alloc(). Then deactivate_locked_super() in virtio_fs_get_tree() will call virtio_kill_sb() to release the discarded superblock. This will call fuse_dax_conn_free() again in fuse_conn_put(), resulting in a possible double free. Fixes: 1dd539577c42 ("virtiofs: add a mount option to enable dax") Signed-off-by: Hangyu Hua Acked-by: Vivek Goyal Reviewed-by: Jingbo Xu Cc: # v5.10 Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 2623cf1fe825e5f706a5f00e6ac552e9d1852ec8 Author: Jens Axboe Date: Fri Dec 15 13:24:10 2023 -0700 cred: switch to using atomic_long_t commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream. There are multiple ways to grab references to credentials, and the only protection we have against overflowing it is the memory required to do so. With memory sizes only moving in one direction, let's bump the reference count to 64-bit and move it outside the realm of feasibly overflowing. Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 03b50868ae5325bfe3251920c56e29b19e5ec24b Author: Igor Russkikh Date: Wed Dec 13 10:40:44 2023 +0100 net: atlantic: fix double free in ring reinit logic [ Upstream commit 7bb26ea74aa86fdf894b7dbd8c5712c5b4187da7 ] Driver has a logic leak in ring data allocation/free, where double free may happen in aq_ring_free if system is under stress and driver init/deinit is happening. The probability is higher to get this during suspend/resume cycle. Verification was done simulating same conditions with stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000 while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done Fixed by explicitly clearing pointers to NULL on deallocation Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Linus Torvalds Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/ Signed-off-by: Igor Russkikh Link: https://lore.kernel.org/r/20231213094044.22988-1-irusskikh@marvell.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit a232eb81c7cb5d4dbd325d4611ed029b7fa07596 Author: Hyunwoo Kim Date: Tue Dec 12 23:10:56 2023 -0500 appletalk: Fix Use-After-Free in atalk_ioctl [ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ] Because atalk_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with atalk_recvmsg(). A use-after-free for skb occurs with the following flow. ``` atalk_ioctl() -> skb_peek() atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 9deccfbaed4b8cc4902ae6f803e2261ff0ad888b Author: Andrew Halaney Date: Tue Dec 12 16:18:33 2023 -0600 net: stmmac: Handle disabled MDIO busses from devicetree [ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ] Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney Reviewed-by: Serge Semin Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 5470533a7d7ea375d0da9e24616952737903fcc0 Author: Rasmus Villemoes Date: Thu Jun 2 09:48:40 2022 +0200 net: stmmac: use dev_err_probe() for reporting mdio bus registration failure [ Upstream commit 839612d23ffd933174db911ce56dc3f3ca883ec5 ] I have a board where these two lines are always printed during boot: imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed It's perfectly fine, and the device is successfully (and silently, as far as the console goes) probed later. Use dev_err_probe() instead, which will demote these messages to debug level (thus removing the alarming messages from the console) when the error is -EPROBE_DEFER, and also has the advantage of including the error code if/when it happens to be something other than -EPROBE_DEFER. While here, add the missing \n to one of the format strings. Signed-off-by: Rasmus Villemoes Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski Stable-dep-of: e23c0d21ce92 ("net: stmmac: Handle disabled MDIO busses from devicetree") Signed-off-by: Sasha Levin commit 52a4c0e82a24b7c7aeb5851917f5501a7ebae99b Author: Nikolay Kuratov Date: Mon Dec 11 19:23:17 2023 +0300 vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space() [ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ] We need to do signed arithmetic if we expect condition `if (bytes < 0)` to be possible Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Nikolay Kuratov Reviewed-by: Stefano Garzarella Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 4c0d7e8261608e5ffa95ba1ba14eff6b429aae09 Author: Yusong Gao Date: Wed Dec 13 10:31:10 2023 +0000 sign-file: Fix incorrect return values check [ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ] There are some wrong return values check in sign-file when call OpenSSL API. The ERR() check cond is wrong because of the program only check the return value is < 0 which ignored the return val is 0. For example: 1. CMS_final() return 1 for success or 0 for failure. 2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure. 3. i2d_TYPEbio() return 1 for success and 0 for failure. 4. BIO_free() return 1 for success and 0 for failure. Link: https://www.openssl.org/docs/manmaster/man3/ Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature") Signed-off-by: Yusong Gao Reviewed-by: Juerg Haefliger Signed-off-by: David Howells Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5 Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 25bfae19b84a72517320ae7c21eaf6e4d683d261 Author: David Arinzon Date: Mon Dec 11 06:28:01 2023 +0000 net: ena: Fix XDP redirection error [ Upstream commit 4ab138ca0a340e6d6e7a6a9bd5004bd8f83127ca ] When sending TX packets, the meta descriptor can be all zeroes as no meta information is required (as in XDP). This patch removes the validity check, as when `disable_meta_caching` is enabled, such TX packets will be dropped otherwise. Fixes: 0e3a3f6dacf0 ("net: ena: support new LLQ acceleration mode") Signed-off-by: Shay Agroskin Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-5-darinzon@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit c83544b70cc8c0219e17058c395383a03e098ed5 Author: David Arinzon Date: Mon Dec 11 06:27:58 2023 +0000 net: ena: Destroy correct number of xdp queues upon failure [ Upstream commit 41db6f99b5489a0d2ef26afe816ef0c6118d1d47 ] The ena_setup_and_create_all_xdp_queues() function freed all the resources upon failure, after creating only xdp_num_queues queues, instead of freeing just the created ones. In this patch, the only resources that are freed, are the ones allocated right before the failure occurs. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shahar Itzko Signed-off-by: David Arinzon Link: https://lore.kernel.org/r/20231211062801.27891-2-darinzon@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7ed59c4027a8f1badc7a4bf43568603279c41781 Author: Dong Chenchen Date: Sun Dec 10 10:02:00 2023 +0800 net: Remove acked SYN flag from packet in the transmit queue correctly [ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ] syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> ... 3. SYN-RECEIVED <-- <-- SYN-SENT 4. ... --> SYN-RECEIVED 5. SYN-RECEIVED --> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <-- SYN-RECEIVED //challenge ack // TCP A: 8. FIN_WAIT_1 --> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet Signed-off-by: Eric Dumazet Signed-off-by: Dong Chenchen Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 10760f4234f752d5752aa5fc7717aedbd4076efc Author: Dinghao Liu Date: Sun Dec 10 12:52:55 2023 +0800 qed: Fix a potential use-after-free in qed_cxt_tables_alloc [ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ] qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel Signed-off-by: Dinghao Liu Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7eda5960a5332654b10d951e735750ed60d7f0a9 Author: Hyunwoo Kim Date: Sat Dec 9 05:05:38 2023 -0500 net/rose: Fix Use-After-Free in rose_ioctl [ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ] Because rose_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with rose_accept(). A use-after-free for skb occurs with the following flow. ``` rose_ioctl() -> skb_peek() rose_accept() -> skb_dequeue() -> kfree_skb() ``` Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 64a032015c336ca1795b3e1b1d1f94085ada3553 Author: Hyunwoo Kim Date: Sat Dec 9 04:42:10 2023 -0500 atm: Fix Use-After-Free in do_vcc_ioctl [ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ] Because do_vcc_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with vcc_recvmsg(). A use-after-free for skb occurs with the following flow. ``` do_vcc_ioctl() -> skb_peek() vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit c20f425e0692815ed5406a2d11f32d1ea9f6bf14 Author: Radu Bulie Date: Thu Dec 7 16:38:01 2023 +0800 net: fec: correct queue selection [ Upstream commit 9fc95fe95c3e2a63ced8eeca4b256518ab204b63 ] The old implementation extracted VLAN TCI info from the payload before the VLAN tag has been pushed in the payload. Another problem was that the VLAN TCI was extracted even if the packet did not have VLAN protocol header. This resulted in invalid VLAN TCI and as a consequence a random queue was computed. This patch fixes the above issues and use the VLAN TCI from the skb if it is present or VLAN TCI from payload if present. If no VLAN header is present queue 0 is selected. Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations") Signed-off-by: Radu Bulie Signed-off-by: Wei Fang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit d15e4b825dc0b0ad24a54d493be2f17bd8eb7f0b Author: Vladimir Oltean Date: Fri Apr 21 01:55:54 2023 +0300 net: vlan: introduce skb_vlan_eth_hdr() [ Upstream commit 1f5020acb33f926030f62563c86dffca35c7b701 ] Similar to skb_eth_hdr() introduced in commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()"), let's introduce a skb_vlan_eth_hdr() helper which can be used in TX-only code paths to get to the VLAN header based on skb->data rather than based on the skb_mac_header(skb). We also consolidate the drivers that dereference skb->data to go through this helper. Signed-off-by: Vladimir Oltean Reviewed-by: Eric Dumazet Reviewed-by: Simon Horman Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Stable-dep-of: 9fc95fe95c3e ("net: fec: correct queue selection") Signed-off-by: Sasha Levin commit bc0860a3c49c2b13a1c7992239d7e7a034ee34a9 Author: Chengfeng Ye Date: Thu Dec 7 12:34:53 2023 +0000 atm: solos-pci: Fix potential deadlock on &tx_queue_lock [ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ] As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. pclose() --> spin_lock(&card->tx_queue_lock) --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit df5c24df63c4d289ca62bb654212bc9507c0d617 Author: Chengfeng Ye Date: Thu Dec 7 12:34:37 2023 +0000 atm: solos-pci: Fix potential deadlock on &cli_queue_lock [ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ] As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. console_show() --> spin_lock(&card->cli_queue_lock) --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 6a7b673e6ec7d1a5a86d4ff8c430e0a205a6af2b Author: Stefan Wahren Date: Wed Dec 6 15:12:22 2023 +0100 qca_spi: Fix reset behavior [ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ] In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 347d10877bde00cd9f998f7dbaa82b87b524a3cf Author: Stefan Wahren Date: Wed Dec 6 15:12:21 2023 +0100 qca_debug: Fix ethtool -G iface tx behavior [ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ] After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a07e5568d95f879127793ac4eb825885ab6cdcf9 Author: Stefan Wahren Date: Wed Dec 6 15:12:20 2023 +0100 qca_debug: Prevent crash on TX ring changes [ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ] The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 97275e470c2a6d19916b47b631d6ec3bd4427566 Author: Maciej Żenczykowski Date: Wed Dec 6 09:36:12 2023 -0800 net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX [ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ] Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern Cc: Lorenzo Colitti Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b30fbeb390d066e7686ce1b9035ebf7c61848ad9 Author: Mikhail Khvainitski Date: Tue Dec 12 15:31:48 2023 +0200 HID: lenovo: Restrict detection of patched firmware only to USB cptkbd [ Upstream commit 43527a0094c10dfbf0d5a2e7979395a38de3ff65 ] Commit 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") introduced a regression for ThinkPad TrackPoint Keyboard II which has similar quirks to cptkbd (so it uses the same workarounds) but slightly different so that there are false-positives during detecting well-behaving firmware. This commit restricts detecting well-behaving firmware to the only model which known to have one and have stable enough quirks to not cause false-positives. Fixes: 46a0a2c96f0f ("HID: lenovo: Detect quirk-free fw on cptkbd and stop applying workaround") Link: https://lore.kernel.org/linux-input/ZXRiiPsBKNasioqH@jekhomev/ Link: https://bbs.archlinux.org/viewtopic.php?pid=2135468#p2135468 Signed-off-by: Mikhail Khvainitski Tested-by: Yauhen Kharuzhy Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit 84eed654ff333b6f2d07258feccb98e97f688ccf Author: David Howells Date: Mon Dec 11 21:43:52 2023 +0000 afs: Fix refcount underflow from error handling race [ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ] If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL server or fileserver), an asynchronous probe to one of its addresses may fail immediately because sendmsg() returns an error. When this happens, a refcount underflow can happen if certain events hit a very small window. The way this occurs is: (1) There are two levels of "call" object, the afs_call and the rxrpc_call. Each of them can be transitioned to a "completed" state in the event of success or failure. (2) Asynchronous afs_calls are self-referential whilst they are active to prevent them from evaporating when they're not being processed. This reference is disposed of when the afs_call is completed. Note that an afs_call may only be completed once; once completed completing it again will do nothing. (3) When a call transmission is made, the app-side rxrpc code queues a Tx buffer for the rxrpc I/O thread to transmit. The I/O thread invokes sendmsg() to transmit it - and in the case of failure, it transitions the rxrpc_call to the completed state. (4) When an rxrpc_call is completed, the app layer is notified. In this case, the app is kafs and it schedules a work item to process events pertaining to an afs_call. (5) When the afs_call event processor is run, it goes down through the RPC-specific handler to afs_extract_data() to retrieve data from rxrpc - and, in this case, it picks up the error from the rxrpc_call and returns it. The error is then propagated to the afs_call and that is completed too. At this point the self-reference is released. (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the window between rxrpc_send_data() queuing the request packet and checking for call completion on the way out, then rxrpc_kernel_send_data() will return the error from sendmsg() to the app. (7) Then afs_make_call() will see an error and will jump to the error handling path which will attempt to clean up the afs_call. (8) The problem comes when the error handling path in afs_make_call() tries to unconditionally drop an async afs_call's self-reference. This self-reference, however, may already have been dropped by afs_extract_data() completing the afs_call (9) The refcount underflows when we return to afs_do_probe_vlserver() and that tries to drop its reference on the afs_call. Fix this by making afs_make_call() attempt to complete the afs_call rather than unconditionally putting it. That way, if afs_extract_data() manages to complete the call first, afs_make_call() won't do anything. The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and sticking an msleep() in rxrpc_send_data() after the 'success:' label to widen the race window. The error message looks something like: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 ... RIP: 0010:refcount_warn_saturate+0xba/0x110 ... afs_put_call+0x1dc/0x1f0 [kafs] afs_fs_get_capabilities+0x8b/0xe0 [kafs] afs_fs_probe_fileserver+0x188/0x1e0 [kafs] afs_lookup_server+0x3bf/0x3f0 [kafs] afs_alloc_server_list+0x130/0x2e0 [kafs] afs_create_volume+0x162/0x400 [kafs] afs_get_tree+0x266/0x410 [kafs] vfs_get_tree+0x25/0xc0 fc_mount+0xe/0x40 afs_d_automount+0x1b3/0x390 [kafs] __traverse_mounts+0x8f/0x210 step_into+0x340/0x760 path_openat+0x13a/0x1260 do_filp_open+0xaf/0x160 do_sys_openat2+0xaf/0x170 or something like: refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x99/0xda ... afs_put_call+0x4a/0x175 afs_send_vl_probes+0x108/0x172 afs_select_vlserver+0xd6/0x311 afs_do_cell_detect_alias+0x5e/0x1e9 afs_cell_detect_alias+0x44/0x92 afs_validate_fc+0x9d/0x134 afs_get_tree+0x20/0x2e6 vfs_get_tree+0x1d/0xc9 fc_mount+0xe/0x33 afs_d_automount+0x48/0x9d __traverse_mounts+0xe0/0x166 step_into+0x140/0x274 open_last_lookups+0x1c1/0x1df path_openat+0x138/0x1c3 do_filp_open+0x55/0xb4 do_sys_openat2+0x6c/0xb6 Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting") Reported-by: Bill MacAllister Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304 Suggested-by: Jeffrey E Altman Signed-off-by: David Howells Reviewed-by: Jeffrey Altman cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 8ee7b2c46594a804c02ee44402e0b04f1acc68e4 Author: Florian Westphal Date: Mon Dec 4 12:29:54 2023 +0100 netfilter: nf_tables: fix 'exist' matching on bigendian arches [ Upstream commit 63331e37fb227e796894b31d713697612c8dee7f ] Maze reports "tcp option fastopen exists" fails to match on OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router. "tcp option fastopen exists" translates to: inet [ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ] [ cmp eq reg 1 0x00000001 ] .. but existing nft userspace generates a 1-byte compare. On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8 is awalys false. Make sure we store this in a consistent fashion, so existing userspace will also work on MSB (bigendian). Regardless of this patch we can also change nft userspace to generate 'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when adding 'option x missing/exists' expressions as well. Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too") Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching") Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check") Reported-by: Maciej Żenczykowski Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/ Signed-off-by: Florian Westphal Acked-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin