commit dafd634415a7f9892a6fcc99c540fe567ab42c92 Author: Greg Kroah-Hartman Date: Fri Oct 11 18:21:44 2019 +0200 Linux 4.19.79 commit 1bd17a737c9e7e91483d9a603528b0e6d4c772f8 Author: Johannes Berg Date: Fri Sep 20 21:54:17 2019 +0200 nl80211: validate beacon head commit f88eb7c0d002a67ef31aeb7850b42ff69abc46dc upstream. We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: stable@vger.kernel.org Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 527ba5d7634b230448c133b6eea304146ec0aa5e Author: Jouni Malinen Date: Mon Feb 11 16:29:04 2019 +0200 cfg80211: Use const more consistently in for_each_element macros commit 7388afe09143210f555bdd6c75035e9acc1fab96 upstream. Enforce the first argument to be a correct type of a pointer to struct element and avoid unnecessary typecasts from const to non-const pointers (the change in validate_ie_attr() is needed to make this part work). In addition, avoid signed/unsigned comparison within for_each_element() and mark struct element packed just in case. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit ad180cace853e60532d118cce17565e4138eb596 Author: Johannes Berg Date: Thu Feb 7 21:44:41 2019 +0100 cfg80211: add and use strongly typed element iteration macros commit 0f3b07f027f87a38ebe5c436490095df762819be upstream. Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 3dab5ba6d7ae8ab5dfcaa61127d92cf07ceca016 Author: Gao Xiang Date: Wed Oct 9 18:12:39 2019 +0800 staging: erofs: detect potential multiref due to corrupted images commit e12a0ce2fa69798194f3a8628baf6edfbd5c548f upstream. As reported by erofs-utils fuzzer, currently, multiref (ondisk deduplication) hasn't been supported for now, we should forbid it properly. Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: # 4.19+ Signed-off-by: Gao Xiang Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20190821140152.229648-1-gaoxiang25@huawei.com [ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED, let's use EIO instead. ] Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman commit 8b4341f9b80bb8a7aefedce50b0305696083a830 Author: Gao Xiang Date: Wed Oct 9 18:12:38 2019 +0800 staging: erofs: add two missing erofs_workgroup_put for corrupted images commit 138e1a0990e80db486ab9f6c06bd5c01f9a97999 upstream. As reported by erofs-utils fuzzer, these error handling path will be entered to handle corrupted images. Lack of erofs_workgroup_puts will cause unmounting unsuccessfully. Fix these return values to EFSCORRUPTED as well. Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: # 4.19+ Signed-off-by: Gao Xiang Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20190819103426.87579-4-gaoxiang25@huawei.com [ Gao Xiang: Older kernel versions don't have length validity check and EFSCORRUPTED, thus backport pageofs check for now. ] Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman commit 596bbc4e0edfab05efc69313e09107caf5096a5c Author: Gao Xiang Date: Wed Oct 9 18:12:37 2019 +0800 staging: erofs: some compressed cluster should be submitted for corrupted images commit ee45197c807895e156b2be0abcaebdfc116487c8 upstream. As reported by erofs_utils fuzzer, a logical page can belong to at most 2 compressed clusters, if one compressed cluster is corrupted, but the other has been ready in submitting chain. The chain needs to submit anyway in order to keep the page working properly (page unlocked with PG_error set, PG_uptodate not set). Let's fix it now. Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support") Cc: # 4.19+ Signed-off-by: Gao Xiang Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20190819103426.87579-2-gaoxiang25@huawei.com [ Gao Xiang: Manually backport to v4.19.y stable. ] Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman commit e7c44410387c99039df28ffcbdaa5ff85ab5e857 Author: Gao Xiang Date: Wed Oct 9 18:12:36 2019 +0800 staging: erofs: fix an error handling in erofs_readdir() commit acb383f1dcb4f1e79b66d4be3a0b6f519a957b0d upstream. Richard observed a forever loop of erofs_read_raw_page() [1] which can be generated by forcely setting ->u.i_blkaddr to 0xdeadbeef (as my understanding block layer can handle access beyond end of device correctly). After digging into that, it seems the problem is highly related with directories and then I found the root cause is an improper error handling in erofs_readdir(). Let's fix it now. [1] https://lore.kernel.org/r/1163995781.68824.1566084358245.JavaMail.zimbra@nod.at/ Reported-by: Richard Weinberger Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations") Cc: # 4.19+ Reviewed-by: Chao Yu Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20190818125457.25906-1-hsiangkao@aol.com [ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED, let's use original error code instead. ] Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman commit 1b94c1e80ca8e22a09451fa495ffa234dbb29ca7 Author: Andrew Murray Date: Thu Aug 29 14:28:35 2019 -0600 coresight: etm4x: Use explicit barriers on enable/disable commit 1004ce4c255fc3eb3ad9145ddd53547d1b7ce327 upstream. Synchronization is recommended before disabling the trace registers to prevent any start or stop points being speculative at the point of disabling the unit (section 7.3.77 of ARM IHI 0064D). Synchronization is also recommended after programming the trace registers to ensure all updates are committed prior to normal code resuming (section 4.3.7 of ARM IHI 0064D). Let's ensure these syncronization points are present in the code and clearly commented. Note that we could rely on the barriers in CS_LOCK and coresight_disclaim_device_unlocked or the context switch to user space - however coresight may be of use in the kernel. On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is only used on armv8 let's directly use dsb(sy) instead of mb(). This removes some ambiguity and makes it easier to correlate the code with the TRM. Signed-off-by: Andrew Murray Reviewed-by: Suzuki K Poulose [Fixed capital letter for "use" in title] Signed-off-by: Mathieu Poirier Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman commit effad578c23f97547cb6155111f77b22e7c0119b Author: Eric Sandeen Date: Wed Oct 2 16:17:54 2019 -0500 vfs: Fix EOVERFLOW testing in put_compat_statfs64 commit cc3a7bfe62b947b423fcb2cfe89fcba92bf48fa3 upstream. Today, put_compat_statfs64() disallows nearly any field value over 2^32 if f_bsize is only 32 bits, but that makes no sense. compat_statfs64 is there for the explicit purpose of providing 64-bit fields for f_files, f_ffree, etc. And f_bsize is always only 32 bits. As a result, 32-bit userspace gets -EOVERFLOW for i.e. large file counts even with -D_FILE_OFFSET_BITS=64 set. In reality, only f_bsize and f_frsize can legitimately overflow (fields like f_type and f_namelen should never be large), so test only those fields. This bug was discussed at length some time ago, and this is the proposal Al suggested at https://lkml.org/lkml/2018/8/6/640. It seemed to get dropped amid the discussion of other related changes, but this part seems obviously correct on its own, so I've picked it up and sent it, for expediency. Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors") Signed-off-by: Eric Sandeen Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit d976344d27f7bfef87703035768e51893ce2bd21 Author: Josh Poimboeuf Date: Fri Apr 12 15:39:32 2019 -0500 arm64/speculation: Support 'mitigations=' cmdline option commit a111b7c0f20e13b54df2fa959b3dc0bdf1925ae6 upstream. Configure arm64 runtime CPU speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by: Josh Poimboeuf [will: reorder checks so KASLR implies KPTI and SSBS is affected by cmdline] Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit af33d746286c1209fc0026877371d03c8f52606f Author: Marc Zyngier Date: Mon Apr 15 16:21:24 2019 -0500 arm64: Use firmware to detect CPUs that are not affected by Spectre-v2 commit 517953c2c47f9c00a002f588ac856a5bc70cede3 upstream. The SMCCC ARCH_WORKAROUND_1 service can indicate that although the firmware knows about the Spectre-v2 mitigation, this particular CPU is not vulnerable, and it is thus not necessary to call the firmware on this CPU. Let's use this information to our benefit. Signed-off-by: Marc Zyngier Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 17d1acc4c61ded6b61f65e5904d9758ddc75ae15 Author: Marc Zyngier Date: Tue Oct 8 17:39:30 2019 +0200 arm64: Force SSBS on context switch [ Upstream commit cbdf8a189a66001c36007bf0f5c975d0376c5c3a ] On a CPU that doesn't support SSBS, PSTATE[12] is RES0. In a system where only some of the CPUs implement SSBS, we end-up losing track of the SSBS bit across task migration. To address this issue, let's force the SSBS bit on context switch. Fixes: 8f04e8e6e29c ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3") Signed-off-by: Marc Zyngier [will: inverted logic and added comments] Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit fe22ea561ce0c4d78f4e8305c852ad6f4a432b6a Author: Will Deacon Date: Tue Oct 8 17:39:29 2019 +0200 arm64: ssbs: Don't treat CPUs with SSBS as unaffected by SSB [ Upstream commit eb337cdfcd5dd3b10522c2f34140a73a4c285c30 ] SSBS provides a relatively cheap mitigation for SSB, but it is still a mitigation and its presence does not indicate that the CPU is unaffected by the vulnerability. Tweak the mitigation logic so that we report the correct string in sysfs. Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit dada3a4abb43fcffe63d11047209752f1698669b Author: Jeremy Linton Date: Tue Oct 8 17:39:28 2019 +0200 arm64: add sysfs vulnerability show for speculative store bypass [ Upstream commit 526e065dbca6df0b5a130b84b836b8b3c9f54e21 ] Return status based on ssbd_state and __ssb_safe. If the mitigation is disabled, or the firmware isn't responding then return the expected machine state based on a whitelist of known good cores. Given a heterogeneous machine, the overall machine vulnerability defaults to safe but is reset to unsafe when we miss the whitelist and the firmware doesn't explicitly tell us the core is safe. In order to make that work we delay transitioning to vulnerable until we know the firmware isn't responding to avoid a case where we miss the whitelist, but the firmware goes ahead and reports the core is not vulnerable. If all the cores in the machine have SSBS, then __ssb_safe will remain true. Tested-by: Stefan Wahren Signed-off-by: Jeremy Linton Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman commit f41df38898ecb5a0a9b5efb863d999d27393c907 Author: Jeremy Linton Date: Tue Oct 8 17:39:27 2019 +0200 arm64: add sysfs vulnerability show for spectre-v2 [ Upstream commit d2532e27b5638bb2e2dd52b80b7ea2ec65135377 ] Track whether all the cores in the machine are vulnerable to Spectre-v2, and whether all the vulnerable cores have been mitigated. We then expose this information to userspace via sysfs. Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 9d1bb39cdd9629d1a6127bd085d3ecc7009789e0 Author: Jeremy Linton Date: Tue Oct 8 17:39:26 2019 +0200 arm64: Always enable spectre-v2 vulnerability detection [ Upstream commit 8c1e3d2bb44cbb998cb28ff9a18f105fee7f1eb3 ] Ensure we are always able to detect whether or not the CPU is affected by Spectre-v2, so that we can later advertise this to userspace. Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit b1a33cfd8034dd45cd90a19bdda0b3293c92401e Author: Marc Zyngier Date: Tue Oct 8 17:39:25 2019 +0200 arm64: Advertise mitigation of Spectre-v2, or lack thereof [ Upstream commit 73f38166095947f3b86b02fbed6bd592223a7ac8 ] We currently have a list of CPUs affected by Spectre-v2, for which we check that the firmware implements ARCH_WORKAROUND_1. It turns out that not all firmwares do implement the required mitigation, and that we fail to let the user know about it. Instead, let's slightly revamp our checks, and rely on a whitelist of cores that are known to be non-vulnerable, and let the user know the status of the mitigation in the kernel log. Signed-off-by: Marc Zyngier Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Suzuki K Poulose Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 59a6dc262c8500c6e5fb9f234c6078fd72ddc20f Author: Jeremy Linton Date: Tue Oct 8 17:39:24 2019 +0200 arm64: Provide a command line to disable spectre_v2 mitigation [ Upstream commit e5ce5e7267ddcbe13ab9ead2542524e1b7993e5a ] There are various reasons, such as benchmarking, to disable spectrev2 mitigation on a machine. Provide a command-line option to do so. Signed-off-by: Jeremy Linton Reviewed-by: Suzuki K Poulose Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Cc: Jonathan Corbet Cc: linux-doc@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit c131623b1e9d94c11e2db4635c4572a85fd8b3ce Author: Jeremy Linton Date: Tue Oct 8 17:39:23 2019 +0200 arm64: Always enable ssb vulnerability detection [ Upstream commit d42281b6e49510f078ace15a8ea10f71e6262581 ] Ensure we are always able to detect whether or not the CPU is affected by SSB, so that we can later advertise this to userspace. Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren [will: Use IS_ENABLED instead of #ifdef] Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 47a11f2eafcc08f7515d141b49f0f889c203b480 Author: Mian Yousaf Kaukab Date: Tue Oct 8 17:39:22 2019 +0200 arm64: enable generic CPU vulnerabilites support [ Upstream commit 61ae1321f06c4489c724c803e9b8363dea576da3 ] Enable CPU vulnerabilty show functions for spectre_v1, spectre_v2, meltdown and store-bypass. Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 512158d0c67e4667fa165efc67ddd0bb96295bf4 Author: Jeremy Linton Date: Tue Oct 8 17:39:21 2019 +0200 arm64: add sysfs vulnerability show for meltdown [ Upstream commit 1b3ccf4be0e7be8c4bd8522066b6cbc92591e912 ] We implement page table isolation as a mitigation for meltdown. Report this to userspace via sysfs. Signed-off-by: Jeremy Linton Reviewed-by: Suzuki K Poulose Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 047aac35fd1a3822987ce2b6239da6058b8525a6 Author: Mian Yousaf Kaukab Date: Tue Oct 8 17:39:20 2019 +0200 arm64: Add sysfs vulnerability show for spectre-v1 [ Upstream commit 3891ebccace188af075ce143d8b072b65e90f695 ] spectre-v1 has been mitigated and the mitigation is always active. Report this to userspace via sysfs Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Jeremy Linton Reviewed-by: Andre Przywara Reviewed-by: Catalin Marinas Tested-by: Stefan Wahren Acked-by: Suzuki K Poulose Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit edfc026626d6339499b3ee126cad9a1a82171a51 Author: Mark Rutland Date: Tue Oct 8 17:39:19 2019 +0200 arm64: fix SSBS sanitization [ Upstream commit f54dada8274643e3ff4436df0ea124aeedc43cae ] In valid_user_regs() we treat SSBS as a RES0 bit, and consequently it is unexpectedly cleared when we restore a sigframe or fiddle with GPRs via ptrace. This patch fixes valid_user_regs() to account for this, updating the function to refer to the latest ARM ARM (ARM DDI 0487D.a). For AArch32 tasks, SSBS appears in bit 23 of SPSR_EL1, matching its position in the AArch32-native PSR format, and we don't need to translate it as we have to for DIT. There are no other bit assignments that we need to account for today. As the recent documentation describes the DIT bit, we can drop our comment regarding DIT. While removing SSBS from the RES0 masks, existing inconsistent whitespace is corrected. Fixes: d71be2b6c0e19180 ("arm64: cpufeature: Detect SSBS and advertise to userspace") Signed-off-by: Mark Rutland Cc: Catalin Marinas Cc: Suzuki K Poulose Cc: Will Deacon Signed-off-by: Will Deacon Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 09c22781dd2c641c1ed58fc95605fc36ca4fe50f Author: Will Deacon Date: Tue Oct 8 17:39:18 2019 +0200 arm64: docs: Document SSBS HWCAP [ Upstream commit ee91176120bd584aa10c564e7e9fdcaf397190a1 ] We advertise the MRS/MSR instructions for toggling SSBS at EL0 using an HWCAP, so document it along with the others. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit a59d42ac50a1e74a12c8b4b448318834a10cb887 Author: Will Deacon Date: Tue Oct 8 17:39:17 2019 +0200 KVM: arm64: Set SCTLR_EL2.DSSBS if SSBD is forcefully disabled and !vhe [ Upstream commit 7c36447ae5a090729e7b129f24705bb231a07e0b ] When running without VHE, it is necessary to set SCTLR_EL2.DSSBS if SSBD has been forcefully disabled on the kernel command-line. Acked-by: Christoffer Dall Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 1eaff33e24414d1b29083fb4cde53555f5f1d259 Author: Will Deacon Date: Tue Oct 8 17:39:16 2019 +0200 arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3 [ Upstream commit 8f04e8e6e29c93421a95b61cad62e3918425eac7 ] On CPUs with support for PSTATE.SSBS, the kernel can toggle the SSBD state without needing to call into firmware. This patch hooks into the existing SSBD infrastructure so that SSBS is used on CPUs that support it, but it's all made horribly complicated by the very real possibility of big/little systems that don't uniformly provide the new capability. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit d286a37471b6a72908d1a0214c79fb16e958a28e Author: Vincent Chen Date: Mon Sep 16 16:47:41 2019 +0800 riscv: Avoid interrupts being erroneously enabled in handle_exception() [ Upstream commit c82dd6d078a2bb29d41eda032bb96d05699a524d ] When the handle_exception function addresses an exception, the interrupts will be unconditionally enabled after finishing the context save. However, It may erroneously enable the interrupts if the interrupts are disabled before entering the handle_exception. For example, one of the WARN_ON() condition is satisfied in the scheduling where the interrupt is disabled and rq.lock is locked. The WARN_ON will trigger a break exception and the handle_exception function will enable the interrupts before entering do_trap_break function. During the procedure, if a timer interrupt is pending, it will be taken when interrupts are enabled. In this case, it may cause a deadlock problem if the rq.lock is locked again in the timer ISR. Hence, the handle_exception() can only enable interrupts when the state of sstatus.SPIE is 1. This patch is tested on HiFive Unleashed board. Signed-off-by: Vincent Chen Reviewed-by: Palmer Dabbelt [paul.walmsley@sifive.com: updated to apply] Fixes: bcae803a21317 ("RISC-V: Enable IRQ during exception handling") Cc: David Abdurachmanov Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley Signed-off-by: Sasha Levin commit 5b67a4721ddd816e81439dc869e3d8b964d86f42 Author: Srikar Dronamraju Date: Wed Sep 4 15:17:37 2019 +0530 perf stat: Reset previous counts on repeat with interval [ Upstream commit b63fd11cced17fcb8e133def29001b0f6aaa5e06 ] When using 'perf stat' with repeat and interval option, it shows wrong values for events. The wrong values will be shown for the first interval on the second and subsequent repetitions. Without the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.000282489 53 faults 2.000282489 513 sched:sched_switch 4.005478208 3,721 faults 4.005478208 2,666 sched:sched_switch 5.025470933 395 faults 5.025470933 1,307 sched:sched_switch 2.009602825 1,84,46,74,40,73,70,95,47,520 faults <------ 2.009602825 1,84,46,74,40,73,70,95,49,568 sched:sched_switch <------ 4.019612206 4,730 faults 4.019612206 2,746 sched:sched_switch 5.039615484 3,953 faults 5.039615484 1,496 sched:sched_switch 2.000274620 1,84,46,74,40,73,70,95,47,520 faults <------ 2.000274620 1,84,46,74,40,73,70,95,47,520 sched:sched_switch <------ 4.000480342 4,282 faults 4.000480342 2,303 sched:sched_switch 5.000916811 1,322 faults 5.000916811 1,064 sched:sched_switch # prev_raw_counts is allocated when using intervals. This is used when calculating the difference in the counts of events when using interval. The current counts are stored in prev_raw_counts to calculate the differences in the next iteration. On the first interval of the second and subsequent repetitions, prev_raw_counts would be the values stored in the last interval of the previous repetitions, while the current counts will only be for the first interval of the current repetition. Hence there is a possibility of events showing up as big number. Fix this by resetting prev_raw_counts whenever perf stat repeats the command. With the fix: # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5 2.019349347 2,597 faults 2.019349347 2,753 sched:sched_switch 4.019577372 3,098 faults 4.019577372 2,532 sched:sched_switch 5.019415481 1,879 faults 5.019415481 1,356 sched:sched_switch 2.000178813 8,468 faults 2.000178813 2,254 sched:sched_switch 4.000404621 7,440 faults 4.000404621 1,266 sched:sched_switch 5.040196079 2,458 faults 5.040196079 556 sched:sched_switch 2.000191939 6,870 faults 2.000191939 1,170 sched:sched_switch 4.000414103 541 faults 4.000414103 902 sched:sched_switch 5.000809863 450 faults 5.000809863 364 sched:sched_switch # Committer notes: This was broken since the cset introducing the --interval feature, i.e. --repeat + --interval wasn't tested at that point, add the Fixes tag so that automatic scripts can pick this up. Fixes: 13370a9b5bb8 ("perf stat: Add interval printing") Signed-off-by: Srikar Dronamraju Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Tested-by: Ravi Bangoria Cc: Namhyung Kim Cc: Naveen N. Rao Cc: Stephane Eranian Cc: stable@vger.kernel.org # v3.9+ Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com [ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ] Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 15c57bf9dcf8281a54721000f22804c1c0df5299 Author: Jiri Olsa Date: Thu Sep 12 12:52:35 2019 +0200 perf tools: Fix segfault in cpu_cache_level__read() [ Upstream commit 0216234c2eed1367a318daeb9f4a97d8217412a0 ] We release wrong pointer on error path in cpu_cache_level__read function, leading to segfault: (gdb) r record ls Starting program: /root/perf/tools/perf/perf record ls ... [ perf record: Woken up 1 times to write data ] double free or corruption (out) Thread 1 "perf" received signal SIGABRT, Aborted. 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 (gdb) bt #0 0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6 #1 0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6 #2 0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6 #3 0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6 #4 0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6 #5 0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc.. #6 0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac.. #7 0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size= Cc: Alexander Shishkin Cc: Michael Petlan Cc: Namhyung Kim Cc: Peter Zijlstra Cc: stable@vger.kernel.org: # v4.6+ Link: http://lore.kernel.org/lkml/20190912105235.10689-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit e5331c37c08baa21e6a1caa7c3ae30156596573c Author: Balasubramani Vivekanandan Date: Thu Sep 26 15:51:01 2019 +0200 tick: broadcast-hrtimer: Fix a race in bc_set_next [ Upstream commit b9023b91dd020ad7e093baa5122b6968c48cc9e0 ] When a cpu requests broadcasting, before starting the tick broadcast hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide the required synchronization when the callback is active on other core. The callback could have already executed tick_handle_oneshot_broadcast() and could have also returned. But still there is a small time window where the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns without doing anything, but the next_event of the tick broadcast clock device is already set to a timeout value. In the race condition diagram below, CPU #1 is running the timer callback and CPU #2 is entering idle state and so calls bc_set_next(). In the worst case, the next_event will contain an expiry time, but the hrtimer will not be started which happens when the racing callback returns HRTIMER_NORESTART. The hrtimer might never recover if all further requests from the CPUs to subscribe to tick broadcast have timeout greater than the next_event of tick broadcast clock device. This leads to cascading of failures and finally noticed as rcu stall warnings Here is a depiction of the race condition CPU #1 (Running timer callback) CPU #2 (Enter idle and subscribe to tick broadcast) --------------------- --------------------- __run_hrtimer() tick_broadcast_enter() bc_handler() __tick_broadcast_oneshot_control() tick_handle_oneshot_broadcast() raw_spin_lock(&tick_broadcast_lock); dev->next_event = KTIME_MAX; //wait for tick_broadcast_lock //next_event for tick broadcast clock set to KTIME_MAX since no other cores subscribed to tick broadcasting raw_spin_unlock(&tick_broadcast_lock); if (dev->next_event == KTIME_MAX) return HRTIMER_NORESTART // callback function exits without restarting the hrtimer //tick_broadcast_lock acquired raw_spin_lock(&tick_broadcast_lock); tick_broadcast_set_event() clockevents_program_event() dev->next_event = expires; bc_set_next() hrtimer_try_to_cancel() //returns -1 since the timer callback is active. Exits without restarting the timer cpu_base->running = NULL; The comment that hrtimer cannot be armed from within the callback is wrong. It is fine to start the hrtimer from within the callback. Also it is safe to start the hrtimer from the enter/exit idle code while the broadcast handler is active. The enter/exit idle code and the broadcast handler are synchronized using tick_broadcast_lock. So there is no need for the existing try to cancel logic. All this can be removed which will eliminate the race condition as well. Fixes: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast") Originally-by: Thomas Gleixner Signed-off-by: Balasubramani Vivekanandan Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com Signed-off-by: Sasha Levin commit 140acbb093844308f693ce2e3b53b3f2c61ca16c Author: Steven Rostedt (VMware) Date: Wed Aug 28 15:05:28 2019 -0400 tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure [ Upstream commit e0d2615856b2046c2e8d5bfd6933f37f69703b0b ] If the re-allocation of tep->cmdlines succeeds, then the previous allocation of tep->cmdlines will be freed. If we later fail in add_new_comm(), we must not free cmdlines, and also should assign tep->cmdlines to the new allocation. Otherwise when freeing tep, the tep->cmdlines will be pointing to garbage. Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls") Signed-off-by: Steven Rostedt (VMware) Cc: Andrew Morton Cc: Jiri Olsa Cc: Namhyung Kim Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit d1e4b4cc3bba1059caafacfab57a558d4ba4df51 Author: Aneesh Kumar K.V Date: Tue Sep 24 09:22:52 2019 +0530 powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag commit 09ce98cacd51fcd0fa0af2f79d1e1d3192f4cbb0 upstream. Rename the #define to indicate this is related to store vs tlbie ordering issue. In the next patch, we will be adding another feature flag that is used to handles ERAT flush vs tlbie ordering issue. Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit f5f31a6ea55813fc0dd5d1c596287455746431d7 Author: Gautham R. Shenoy Date: Wed May 15 13:15:52 2019 +0530 powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt() [ Upstream commit c784be435d5dae28d3b03db31753dd7a18733f0c ] The calls to arch_add_memory()/arch_remove_memory() are always made with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin(). On pSeries, arch_add_memory()/arch_remove_memory() eventually call resize_hpt() which in turn calls stop_machine() which acquires the read-side cpu_hotplug_lock again, thereby resulting in the recursive acquisition of this lock. In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system lockup during a memory hotplug operation because cpus_read_lock() is a per-cpu rwsem read, which, in the fast-path (in the absence of the writer, which in our case is a CPU-hotplug operation) simply increments the read_count on the semaphore. Thus a recursive read in the fast-path doesn't cause any problems. However, we can hit this problem in practice if there is a concurrent CPU-Hotplug operation in progress which is waiting to acquire the write-side of the lock. This will cause the second recursive read to block until the writer finishes. While the writer is blocked since the first read holds the lock. Thus both the reader as well as the writers fail to make any progress thereby blocking both CPU-Hotplug as well as Memory Hotplug operations. Memory-Hotplug CPU-Hotplug CPU 0 CPU 1 ------ ------ 1. down_read(cpu_hotplug_lock.rw_sem) [memory_hotplug_begin] 2. down_write(cpu_hotplug_lock.rw_sem) [cpu_up/cpu_down] 3. down_read(cpu_hotplug_lock.rw_sem) [stop_machine()] Lockdep complains as follows in these code-paths. swapper/0/1 is trying to acquire lock: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60 but task is already holding lock: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(cpu_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by swapper/0/1: #0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0 #1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50 #2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0 stack backtrace: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166 Call Trace: dump_stack+0xe8/0x164 (unreliable) __lock_acquire+0x1110/0x1c70 lock_acquire+0x240/0x290 cpus_read_lock+0x64/0xf0 stop_machine+0x2c/0x60 pseries_lpar_resize_hpt+0x19c/0x2c0 resize_hpt_for_hotplug+0x70/0xd0 arch_add_memory+0x58/0xfc devm_memremap_pages+0x5e8/0x8f0 pmem_attach_disk+0x764/0x830 nvdimm_bus_probe+0x118/0x240 really_probe+0x230/0x4b0 driver_probe_device+0x16c/0x1e0 __driver_attach+0x148/0x1b0 bus_for_each_dev+0x90/0x130 driver_attach+0x34/0x50 bus_add_driver+0x1a8/0x360 driver_register+0x108/0x170 __nd_driver_register+0xd0/0xf0 nd_pmem_driver_init+0x34/0x48 do_one_initcall+0x1e0/0x45c kernel_init_freeable+0x540/0x64c kernel_init+0x2c/0x160 ret_from_kernel_thread+0x5c/0x68 Fix this issue by 1) Requiring all the calls to pseries_lpar_resize_hpt() be made with cpu_hotplug_lock held. 2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked() as a consequence of 1) 3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt() with cpu_hotplug_lock held. Fixes: dbcf929c0062 ("powerpc/pseries: Add support for hash table resizing") Cc: stable@vger.kernel.org # v4.11+ Reported-by: Aneesh Kumar K.V Signed-off-by: Gautham R. Shenoy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com Signed-off-by: Sasha Levin commit c688982ffaeb71cbf0c6a16a232d037baf21e472 Author: Xiubo Li Date: Wed May 29 15:16:05 2019 -0500 nbd: fix crash when the blksize is zero [ Upstream commit 553768d1169a48c0cd87c4eb4ab57534ee663415 ] This will allow the blksize to be set zero and then use 1024 as default. Reviewed-by: Josef Bacik Signed-off-by: Xiubo Li [fix to use goto out instead of return in genl_connect] Signed-off-by: Mike Christie Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 63bb8b76ed62e4075a6bd805132fd9647b0c0e47 Author: Sean Christopherson Date: Tue Oct 1 09:21:23 2019 -0700 KVM: nVMX: Fix consistency check on injected exception error code [ Upstream commit 567926cca99ba1750be8aae9c4178796bf9bb90b ] Current versions of Intel's SDM incorrectly state that "bits 31:15 of the VM-Entry exception error-code field" must be zero. In reality, bits 31:16 must be zero, i.e. error codes are 16-bit values. The bogus error code check manifests as an unexpected VM-Entry failure due to an invalid code field (error number 7) in L1, e.g. when injecting a #GP with error_code=0x9f00. Nadav previously reported the bug[*], both to KVM and Intel, and fixed the associated kvm-unit-test. [*] https://patchwork.kernel.org/patch/11124749/ Reported-by: Nadav Amit Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Reviewed-by: Jim Mattson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin commit 34b13ff69668d6e8534719f096dd15987f46efaf Author: Cédric Le Goater Date: Tue Aug 6 19:25:38 2019 +0200 KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP [ Upstream commit 237aed48c642328ff0ab19b63423634340224a06 ] When a vCPU is brought done, the XIVE VP (Virtual Processor) is first disabled and then the event notification queues are freed. When freeing the queues, we check for possible escalation interrupts and free them also. But when a XIVE VP is disabled, the underlying XIVE ENDs also are disabled in OPAL. When an END (Event Notification Descriptor) is disabled, its ESB pages (ESn and ESe) are disabled and loads return all 1s. Which means that any access on the ESB page of the escalation interrupt will return invalid values. When an interrupt is freed, the shutdown handler computes a 'saved_p' field from the value returned by a load in xive_do_source_set_mask(). This value is incorrect for escalation interrupts for the reason described above. This has no impact on Linux/KVM today because we don't make use of it but we will introduce in future changes a xive_get_irqchip_state() handler. This handler will use the 'saved_p' field to return the state of an interrupt and 'saved_p' being incorrect, softlockup will occur. Fix the vCPU cleanup sequence by first freeing the escalation interrupts if any, then disable the XIVE VP and last free the queues. Fixes: 90c73795afa2 ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode") Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Cédric Le Goater Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org Signed-off-by: Sasha Levin commit 1b155b4fe8b4b581d70221642be63c9fc6da4f6e Author: Hans de Goede Date: Sat Sep 7 22:32:38 2019 +0200 drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed [ Upstream commit 9dbc88d013b79c62bd845cb9e7c0256e660967c5 ] Bail from the pci_driver probe function instead of from the drm_driver load function. This avoid /dev/dri/card0 temporarily getting registered and then unregistered again, sending unwanted add / remove udev events to userspace. Specifically this avoids triggering the (userspace) bug fixed by this plymouth merge-request: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59 Note that despite that being an userspace bug, not sending unnecessary udev events is a good idea in general. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490 Reviewed-by: Michel Dänzer Signed-off-by: Hans de Goede Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 04e0c84f137dd07aa931c00db1a2ac80f3be4be5 Author: Navid Emamdoost Date: Wed Sep 25 14:05:09 2019 -0500 nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs [ Upstream commit 8ce39eb5a67aee25d9f05b40b673c95b23502e3e ] In nfp_flower_spawn_vnic_reprs in the loop if initialization or the allocations fail memory is leaked. Appropriate releases are added. Fixes: b94524529741 ("nfp: flower: add per repr private data for LAG offload") Signed-off-by: Navid Emamdoost Acked-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 575a5bb3d37254c620f3a9e68bb61cd8ba81397e Author: Arnaldo Carvalho de Melo Date: Thu Sep 26 14:36:48 2019 -0300 perf unwind: Fix libunwind build failure on i386 systems [ Upstream commit 26acf400d2dcc72c7e713e1f55db47ad92010cc2 ] Naresh Kamboju reported, that on the i386 build pr_err() doesn't get defined properly due to header ordering: perf-in.o: In function `libunwind__x86_reg_id': tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109: undefined reference to `pr_err' Reported-by: Naresh Kamboju Signed-off-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Jiri Olsa Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit b0aaf65bb16ab92d1d09c99ad2779aa1bcf4062b Author: Valdis Kletnieks Date: Wed Sep 25 16:45:59 2019 -0700 kernel/elfcore.c: include proper prototypes [ Upstream commit 0f74914071ab7e7b78731ed62bf350e3a344e0a5 ] When building with W=1, gcc properly complains that there's no prototypes: CC kernel/elfcore.o kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes] 7 | Elf_Half __weak elf_core_extra_phdrs(void) | ^~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes] 12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes] 17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm) | ^~~~~~~~~~~~~~~~~~~~~~~~~ kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes] 22 | size_t __weak elf_core_extra_data_size(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ Provide the include file so gcc is happy, and we don't have potential code drift Link: http://lkml.kernel.org/r/29875.1565224705@turing-police Signed-off-by: Valdis Kletnieks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit bab46480e6f918bc4bcb1b6c30629ccbcae455b7 Author: Thomas Richter Date: Mon Sep 9 13:41:16 2019 +0200 perf build: Add detection of java-11-openjdk-devel package [ Upstream commit 815c1560bf8fd522b8d93a1d727868b910c1cc24 ] With Java 11 there is no seperate JRE anymore. Details: https://coderanch.com/t/701603/java/JRE-JDK Therefore the detection of the JRE needs to be adapted. This change works for s390 and x86. I have not tested other platforms. Committer testing: Continues to work with the OpenJDK 8: $ rm -f ~acme/lib64/libperf-jvmti.so $ rpm -qa | grep jdk-devel java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64 $ git log --oneline -1 a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1 $ ls -la ~acme/lib64/libperf-jvmti.so -rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so $ Suggested-by: Andreas Krebbel Signed-off-by: Thomas Richter Tested-by: Arnaldo Carvalho de Melo Cc: Heiko Carstens Cc: Hendrik Brueckner Cc: Vasily Gorbik Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 46ff0e2f869f785ca3f60d3fa33e24e707ae847d Author: KeMeng Shi Date: Mon Sep 16 06:53:28 2019 +0000 sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() [ Upstream commit 714e501e16cd473538b609b3e351b2cc9f7f09ed ] An oops can be triggered in the scheduler when running qemu on arm64: Unable to handle kernel paging request at virtual address ffff000008effe40 Internal error: Oops: 96000007 [#1] SMP Process migration/0 (pid: 12, stack limit = 0x00000000084e3736) pstate: 20000085 (nzCv daIf -PAN -UAO) pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20 lr : move_queued_task.isra.21+0x124/0x298 ... Call trace: __ll_sc___cmpxchg_case_acq_4+0x4/0x20 __migrate_task+0xc8/0xe0 migration_cpu_stop+0x170/0x180 cpu_stopper_thread+0xec/0x178 smpboot_thread_fn+0x1ac/0x1e8 kthread+0x134/0x138 ret_from_fork+0x10/0x18 __set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to migrage the process if process is not currently running on any one of the CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if corresponding bit is coincidentally set. As a consequence, kernel will access an invalid rq address associate with the invalid CPU in migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs. The reproduce the crash: 1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling sched_setaffinity. 2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online" and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn. 3) Oops appears if the invalid CPU is set in memory after tested cpumask. Signed-off-by: KeMeng Shi Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Valentin Schneider Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 6cb7aa1b4f94410369bc80f88d7a89bb8a65397a Author: Mathieu Desnoyers Date: Thu Sep 19 13:36:59 2019 -0400 sched/membarrier: Fix private expedited registration check [ Upstream commit fc0d77387cb5ae883fd774fc559e056a8dde024c ] Fix a logic flaw in the way membarrier_register_private_expedited() handles ready state checks for private expedited sync core and private expedited registrations. If a private expedited membarrier registration is first performed, and then a private expedited sync_core registration is performed, the ready state check will skip the second registration when it really should not. Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Cc: Chris Metcalf Cc: Christoph Lameter Cc: Eric W. Biederman Cc: Kirill Tkhai Cc: Linus Torvalds Cc: Mike Galbraith Cc: Oleg Nesterov Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Russell King - ARM Linux admin Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190919173705.2181-2-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit e250f2b6aa9ef9cef4f239b15975867c4902f968 Author: Mathieu Desnoyers Date: Thu Sep 19 13:37:01 2019 -0400 sched/membarrier: Call sync_core only before usermode for same mm [ Upstream commit 2840cf02fae627860156737e83326df354ee4ec6 ] When the prev and next task's mm change, switch_mm() provides the core serializing guarantees before returning to usermode. The only case where an explicit core serialization is needed is when the scheduler keeps the same mm for prev and next. Suggested-by: Oleg Nesterov Signed-off-by: Mathieu Desnoyers Signed-off-by: Peter Zijlstra (Intel) Cc: Chris Metcalf Cc: Christoph Lameter Cc: Eric W. Biederman Cc: Kirill Tkhai Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Russell King - ARM Linux admin Cc: Thomas Gleixner Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 9f33b178cbb2f6b1fd45c6e7b69bd9900971f554 Author: Nathan Chancellor Date: Tue Sep 17 21:21:49 2019 -0700 libnvdimm/nfit_test: Fix acpi_handle redefinition [ Upstream commit 59f08896f058a92f03a0041b397a1a227c5e8529 ] After commit 62974fc389b3 ("libnvdimm: Enable unit test infrastructure compile checks"), clang warns: In file included from ../drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:15: ../drivers/nvdimm/../../tools/testing/nvdimm/test/nfit_test.h:206:15: warning: redefinition of typedef 'acpi_handle' is a C11 feature [-Wtypedef-redefinition] typedef void *acpi_handle; ^ ../include/acpi/actypes.h:424:15: note: previous definition is here typedef void *acpi_handle; /* Actually a ptr to a NS Node */ ^ 1 warning generated. The include chain: iomap.c -> linux/acpi.h -> acpi/acpi.h -> acpi/actypes.h nfit_test.h Avoid this by including linux/acpi.h in nfit_test.h, which allows us to remove both the typedef and the forward declaration of acpi_object. Link: https://github.com/ClangBuiltLinux/linux/issues/660 Signed-off-by: Nathan Chancellor Reviewed-by: Ira Weiny Link: https://lore.kernel.org/r/20190918042148.77553-1-natechancellor@gmail.com Signed-off-by: Dan Williams Signed-off-by: Sasha Levin commit 7b4f541fcd1cf5e1a10f6c4e7d59d7e80907fe7d Author: zhengbin Date: Wed Aug 14 15:59:09 2019 +0800 fuse: fix memleak in cuse_channel_open [ Upstream commit 9ad09b1976c562061636ff1e01bfc3a57aebe56b ] If cuse_send_init fails, need to fuse_conn_put cc->fc. cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1) ->fuse_dev_alloc->fuse_conn_get ->fuse_dev_free->fuse_conn_put Fixes: cc080e9e9be1 ("fuse: introduce per-instance fuse_dev structure") Reported-by: Hulk Robot Signed-off-by: zhengbin Signed-off-by: Miklos Szeredi Signed-off-by: Sasha Levin commit 2e93d24ac75efddc855be4719f7271325f06496c Author: Aneesh Kumar K.V Date: Thu Sep 19 14:03:55 2019 +0530 libnvdimm/region: Initialize bad block for volatile namespaces [ Upstream commit c42adf87e4e7ed77f6ffe288dc90f980d07d68df ] We do check for a bad block during namespace init and that use region bad block list. We need to initialize the bad block for volatile regions for this to work. We also observe a lockdep warning as below because the lock is not initialized correctly since we skip bad block init for volatile regions. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149 Call Trace: [c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable) [c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60 [c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0 [c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270 [c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290 [c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0 [c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0 [c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160 [c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240 [c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0 [c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0 [c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0 [c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0 [c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130 [c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50 [c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0 [c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170 [c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100 [c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48 [c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0 [c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c [c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180 [c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68 Signed-off-by: Aneesh Kumar K.V Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com Signed-off-by: Dan Williams Signed-off-by: Sasha Levin commit 9025adf37ee8d9511756e5d3a1bee54f6cbd72e6 Author: Stefan Mavrodiev Date: Fri Jul 26 16:32:36 2019 +0300 thermal_hwmon: Sanitize thermal_zone type [ Upstream commit 8c7aa184281c01fc26f319059efb94725012921d ] When calling thermal_add_hwmon_sysfs(), the device type is sanitized by replacing '-' with '_'. However tz->type remains unsanitized. Thus calling thermal_hwmon_lookup_by_type() returns no device. And if there is no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup failed!". The result is unregisted hwmon devices in the sysfs. Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon") Signed-off-by: Stefan Mavrodiev Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin commit c01a9dbec18af8dbbe6dc75c033003427de68ed8 Author: Ido Schimmel Date: Wed Jul 10 13:14:52 2019 +0300 thermal: Fix use-after-free when unregistering thermal zone device [ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ] thermal_zone_device_unregister() cancels the delayed work that polls the thermal zone, but it does not wait for it to finish. This is racy with respect to the freeing of the thermal zone device, which can result in a use-after-free [1]. Fix this by waiting for the delayed work to finish before freeing the thermal zone device. Note that thermal_zone_device_set_polling() is never invoked from an atomic context, so it is safe to call cancel_delayed_work_sync() that can block. [1] [ +0.002221] ================================================================== [ +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0 [ +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17 [ +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701 [ +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016 [ +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check [ +0.000012] Call Trace: [ +0.000021] dump_stack+0xa9/0x10e [ +0.000020] print_address_description.cold.2+0x9/0x25e [ +0.000018] __kasan_report.cold.3+0x78/0x9d [ +0.000016] kasan_report+0xe/0x20 [ +0.000016] __mutex_lock+0x1076/0x11c0 [ +0.000014] step_wise_throttle+0x72/0x150 [ +0.000018] handle_thermal_trip+0x167/0x760 [ +0.000019] thermal_zone_device_update+0x19e/0x5f0 [ +0.000019] process_one_work+0x969/0x16f0 [ +0.000017] worker_thread+0x91/0xc40 [ +0.000014] kthread+0x33d/0x400 [ +0.000015] ret_from_fork+0x3a/0x50 [ +0.000020] Allocated by task 1: [ +0.000015] save_stack+0x19/0x80 [ +0.000015] __kasan_kmalloc.constprop.4+0xc1/0xd0 [ +0.000014] kmem_cache_alloc_trace+0x152/0x320 [ +0.000015] thermal_zone_device_register+0x1b4/0x13a0 [ +0.000015] mlxsw_thermal_init+0xc92/0x23d0 [ +0.000014] __mlxsw_core_bus_device_register+0x659/0x11b0 [ +0.000013] mlxsw_core_bus_device_register+0x3d/0x90 [ +0.000013] mlxsw_pci_probe+0x355/0x4b0 [ +0.000014] local_pci_probe+0xc3/0x150 [ +0.000013] pci_device_probe+0x280/0x410 [ +0.000013] really_probe+0x26a/0xbb0 [ +0.000013] driver_probe_device+0x208/0x2e0 [ +0.000013] device_driver_attach+0xfe/0x140 [ +0.000013] __driver_attach+0x110/0x310 [ +0.000013] bus_for_each_dev+0x14b/0x1d0 [ +0.000013] driver_register+0x1c0/0x400 [ +0.000015] mlxsw_sp_module_init+0x5d/0xd3 [ +0.000014] do_one_initcall+0x239/0x4dd [ +0.000013] kernel_init_freeable+0x42b/0x4e8 [ +0.000012] kernel_init+0x11/0x18b [ +0.000013] ret_from_fork+0x3a/0x50 [ +0.000015] Freed by task 581: [ +0.000013] save_stack+0x19/0x80 [ +0.000014] __kasan_slab_free+0x125/0x170 [ +0.000013] kfree+0xf3/0x310 [ +0.000013] thermal_release+0xc7/0xf0 [ +0.000014] device_release+0x77/0x200 [ +0.000014] kobject_put+0x1a8/0x4c0 [ +0.000014] device_unregister+0x38/0xc0 [ +0.000014] thermal_zone_device_unregister+0x54e/0x6a0 [ +0.000014] mlxsw_thermal_fini+0x184/0x35a [ +0.000014] mlxsw_core_bus_device_unregister+0x10a/0x640 [ +0.000013] mlxsw_devlink_core_bus_device_reload+0x92/0x210 [ +0.000015] devlink_nl_cmd_reload+0x113/0x1f0 [ +0.000014] genl_family_rcv_msg+0x700/0xee0 [ +0.000013] genl_rcv_msg+0xca/0x170 [ +0.000013] netlink_rcv_skb+0x137/0x3a0 [ +0.000012] genl_rcv+0x29/0x40 [ +0.000013] netlink_unicast+0x49b/0x660 [ +0.000013] netlink_sendmsg+0x755/0xc90 [ +0.000013] __sys_sendto+0x3de/0x430 [ +0.000013] __x64_sys_sendto+0xe2/0x1b0 [ +0.000013] do_syscall_64+0xa4/0x4d0 [ +0.000013] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ +0.000017] The buggy address belongs to the object at ffff8881e48e0008 which belongs to the cache kmalloc-2k of size 2048 [ +0.000012] The buggy address is located 1096 bytes inside of 2048-byte region [ffff8881e48e0008, ffff8881e48e0808) [ +0.000007] The buggy address belongs to the page: [ +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0 [ +0.000020] flags: 0x200000000010200(slab|head) [ +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0 [ +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ +0.000007] page dumped because: kasan: bad access detected [ +0.000012] Memory state around the buggy address: [ +0.000012] ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000008] ^ [ +0.000012] ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000012] ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ +0.000007] ================================================================== Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer") Reported-by: Jiri Pirko Signed-off-by: Ido Schimmel Acked-by: Jiri Pirko Signed-off-by: Zhang Rui Signed-off-by: Sasha Levin commit 55ebeb4e865d491a318dad93173e7355a28aba80 Author: Sanjay R Mehta Date: Fri Mar 29 11:32:50 2019 +0000 ntb: point to right memory window index [ Upstream commit ae89339b08f3fe02457ec9edd512ddc3d246d0f8 ] second parameter of ntb_peer_mw_get_addr is pointing to wrong memory window index by passing "peer gidx" instead of "local gidx". For ex, "local gidx" value is '0' and "peer gidx" value is '1', then on peer side ntb_mw_set_trans() api is used as below with gidx pointing to local side gidx which is '0', so memroy window '0' is chosen and XLAT '0' will be programmed by peer side. ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat, peer->inbuf_size); Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx pointing to "peer gidx" which is '1', so pointing to memory window '1' instead of memory window '0'. ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr, &peer->outbuf_size); So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr(). Signed-off-by: Sanjay R Mehta Signed-off-by: Jon Mason Signed-off-by: Sasha Levin commit 9dabade5c1977fafa1dbfa855fb756f520d25589 Author: Arvind Sankar Date: Mon Sep 23 13:17:54 2019 -0400 x86/purgatory: Disable the stackleak GCC plugin for the purgatory [ Upstream commit ca14c996afe7228ff9b480cf225211cc17212688 ] Since commit: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS") kexec breaks if GCC_PLUGIN_STACKLEAK=y is enabled, as the purgatory contains undefined references to stackleak_track_stack. Attempting to load a kexec kernel results in this failure: kexec: Undefined symbol: stackleak_track_stack kexec-bzImage64: Loading purgatory failed Fix this by disabling the stackleak plugin for the purgatory. Signed-off-by: Arvind Sankar Reviewed-by: Nick Desaulniers Cc: Borislav Petkov Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS") Link: https://lkml.kernel.org/r/20190923171753.GA2252517@rani.riverdale.lan Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin commit 65348659535d23e6fb7a79aa9d54332479cf980e Author: Fabrice Gasnier Date: Wed Sep 18 16:54:21 2019 +0200 pwm: stm32-lp: Add check in case requested period cannot be achieved [ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ] LPTimer can use a 32KHz clock for counting. It depends on clock tree configuration. In such a case, PWM output frequency range is limited. Although unlikely, nothing prevents user from requesting a PWM frequency above counting clock (32KHz for instance): - This causes (prd - 1) = 0xffff to be written in ARR register later in the apply() routine. This results in badly configured PWM period (and also duty_cycle). Add a check to report an error is such a case. Signed-off-by: Fabrice Gasnier Reviewed-by: Uwe Kleine-König Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin commit 19b1c70e911c4979a501a56228414cbc4229982d Author: Trond Myklebust Date: Fri Sep 20 07:23:40 2019 -0400 pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors [ Upstream commit 9c47b18cf722184f32148784189fca945a7d0561 ] IF the server rejected our layout return with a state error such as NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want to clear out all the remaining layout segments and mark that stateid as invalid. Fixes: 1c5bd76d17cca ("pNFS: Enable layoutreturn operation for...") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 1c70ae6a91f9a17280476dd8675e4ce60f32eb0b Author: Trek Date: Sat Aug 31 21:25:36 2019 +0200 drm/amdgpu: Check for valid number of registers to read [ Upstream commit 73d8e6c7b841d9bf298c8928f228fb433676635c ] Do not try to allocate any amount of memory requested by the user. Instead limit it to 128 registers. Actually the longest series of consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and mmGB_MACROTILE_MODE0-15 (0x2644-0x2673). Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273 Signed-off-by: Trek Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit e0af3b19ad77b4a2c53ef05c1c11e2f58462d59c Author: Felix Kuehling Date: Thu Sep 5 19:22:02 2019 -0400 drm/amdgpu: Fix KFD-related kernel oops on Hawaii [ Upstream commit dcafbd50f2e4d5cc964aae409fb5691b743fba23 ] Hawaii needs to flush caches explicitly, submitting an IB in a user VMID from kernel mode. There is no s_fence in this case. Fixes: eb3961a57424 ("drm/amdgpu: remove fence context from the job") Signed-off-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f7ace7f25214e80b06cead8fcabfb12a6176035c Author: Florian Westphal Date: Thu Sep 19 16:56:44 2019 +0200 netfilter: nf_tables: allow lookups in dynamic sets [ Upstream commit acab713177377d9e0889c46bac7ff0cfb9a90c4d ] This un-breaks lookups in sets that have the 'dynamic' flag set. Given this active example configuration: table filter { set set1 { type ipv4_addr size 64 flags dynamic,timeout timeout 1m } chain input { type filter hook input priority 0; policy accept; } } ... this works: nft add rule ip filter input add @set1 { ip saddr } -> whenever rule is triggered, the source ip address is inserted into the set (if it did not exist). This won't work: nft add rule ip filter input ip saddr @set1 counter Error: Could not process rule: Operation not supported In other words, we can add entries to the set, but then can't make matching decision based on that set. That is just wrong -- all set backends support lookups (else they would not be very useful). The failure comes from an explicit rejection in nft_lookup.c. Looking at the history, it seems like NFT_SET_EVAL used to mean 'set contains expressions' (aka. "is a meter"), for instance something like nft add rule ip filter input meter example { ip saddr limit rate 10/second } or nft add rule ip filter input meter example { ip saddr counter } The actual meaning of NFT_SET_EVAL however, is 'set can be updated from the packet path'. 'meters' and packet-path insertions into sets, such as 'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c) and thus require a set backend that provides the ->update() function. The only set that provides this also is the only one that has the NFT_SET_EVAL feature flag. Removing the wrong check makes the above example work. While at it, also fix the flag check during set instantiation to allow supported combinations only. Fixes: 8aeff920dcc9b3f ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit f217883bbc92cfe5b5fcd6cdb2919212a4e1c5f6 Author: Ryan Chen Date: Mon Aug 19 14:47:38 2019 +0930 watchdog: aspeed: Add support for AST2600 [ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ] The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen Signed-off-by: Joel Stanley Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin commit 520c2a64fc7899fbb9dc369d92fced171a9f0e16 Author: Erqi Chen Date: Wed Aug 28 21:22:45 2019 +0800 ceph: reconnect connection if session hang in opening state [ Upstream commit 71a228bc8d65900179e37ac309e678f8c523f133 ] If client mds session is evicted in CEPH_MDS_SESSION_OPENING state, mds won't send session msg to client, and delayed_work skip CEPH_MDS_SESSION_OPENING state session, the session hang forever. Allow ceph_con_keepalive to reconnect a session in OPENING to avoid session hang. Also, ensure that we skip sessions in RESTARTING and REJECTED states since those states can't be resurrected by issuing a keepalive. Link: https://tracker.ceph.com/issues/41551 Signed-off-by: Erqi Chen chenerqi@gmail.com Reviewed-by: "Yan, Zheng" Signed-off-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 0275113fc09a55ee1f1235173c6d6701744aaf93 Author: Luis Henriques Date: Tue Jul 23 16:50:20 2019 +0100 ceph: fix directories inode i_blkbits initialization [ Upstream commit 750670341a24cb714e624e0fd7da30900ad93752 ] When filling an inode with info from the MDS, i_blkbits is being initialized using fl_stripe_unit, which contains the stripe unit in bytes. Unfortunately, this doesn't make sense for directories as they have fl_stripe_unit set to '0'. This means that i_blkbits will be set to 0xff, causing an UBSAN undefined behaviour in i_blocksize(): UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12 shift exponent 255 is too large for 32-bit type 'int' Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit is zero. Signed-off-by: Luis Henriques Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 2bc2a90a083ae13d3f77c4dba3f71c9c7b3340d1 Author: Igor Druzhinin Date: Thu Sep 12 19:31:51 2019 +0100 xen/pci: reserve MCFG areas earlier [ Upstream commit a4098bc6eed5e31e0391bcc068e61804c98138df ] If MCFG area is not reserved in E820, Xen by default will defer its usage until Dom0 registers it explicitly after ACPI parser recognizes it as a reserved resource in DSDT. Having it reserved in E820 is not mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2) and firmware is free to keep a hole in E820 in that place. Xen doesn't know what exactly is inside this hole since it lacks full ACPI view of the platform therefore it's potentially harmful to access MCFG region without additional checks as some machines are known to provide inconsistent information on the size of the region. Now xen_mcfg_late() runs after acpi_init() which is too late as some basic PCI enumeration starts exactly there as well. Trying to register a device prior to MCFG reservation causes multiple problems with PCIe extended capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are no convenient hooks for us to subscribe to so register MCFG areas earlier upon the first invocation of xen_add_device(). It should be safe to do once since all the boot time buses must have their MCFG areas in MCFG table already and we don't support PCI bus hot-plug. Signed-off-by: Igor Druzhinin Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky Signed-off-by: Sasha Levin commit 18dd2b05f349a3b430791b64676374a2d490896b Author: Chengguang Xu Date: Tue Aug 20 18:03:25 2019 +0800 9p: avoid attaching writeback_fid on mmap with type PRIVATE [ Upstream commit c87a37ebd40b889178664c2c09cc187334146292 ] Currently on mmap cache policy, we always attach writeback_fid whether mmap type is SHARED or PRIVATE. However, in the use case of kata-container which combines 9p(Guest OS) with overlayfs(Host OS), this behavior will trigger overlayfs' copy-up when excute command inside container. Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cn Signed-off-by: Chengguang Xu Signed-off-by: Dominique Martinet Signed-off-by: Sasha Levin commit 07f3596ce34484d99bbd1449381002b09b523528 Author: Lu Shuaibing Date: Thu Jun 13 15:08:54 2019 +0800 9p: Transport error uninitialized [ Upstream commit 0ce772fe79b68f83df40f07f28207b292785c677 ] The p9_tag_alloc() does not initialize the transport error t_err field. The struct p9_req_t *req is allocated and stored in a struct p9_client variable. The field t_err is never initialized before p9_conn_cancel() checks its value. KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool) reports this bug. ================================================================== BUG: KUMSAN: use of uninitialized memory in p9_conn_cancel+0x2d9/0x3b0 Read of size 4 at addr ffff88805f9b600c by task kworker/1:2/1216 CPU: 1 PID: 1216 Comm: kworker/1:2 Not tainted 5.2.0-rc4+ #28 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Workqueue: events p9_write_work Call Trace: dump_stack+0x75/0xae __kumsan_report+0x17c/0x3e6 kumsan_report+0xe/0x20 p9_conn_cancel+0x2d9/0x3b0 p9_write_work+0x183/0x4a0 process_one_work+0x4d1/0x8c0 worker_thread+0x6e/0x780 kthread+0x1ca/0x1f0 ret_from_fork+0x35/0x40 Allocated by task 1979: save_stack+0x19/0x80 __kumsan_kmalloc.constprop.3+0xbc/0x120 kmem_cache_alloc+0xa7/0x170 p9_client_prepare_req.part.9+0x3b/0x380 p9_client_rpc+0x15e/0x880 p9_client_create+0x3d0/0xac0 v9fs_session_init+0x192/0xc80 v9fs_mount+0x67/0x470 legacy_get_tree+0x70/0xd0 vfs_get_tree+0x4a/0x1c0 do_mount+0xba9/0xf90 ksys_mount+0xa8/0x120 __x64_sys_mount+0x62/0x70 do_syscall_64+0x6d/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 0: (stack is not available) The buggy address belongs to the object at ffff88805f9b6008 which belongs to the cache p9_req_t of size 144 The buggy address is located 4 bytes inside of 144-byte region [ffff88805f9b6008, ffff88805f9b6098) The buggy address belongs to the page: page:ffffea00017e6d80 refcount:1 mapcount:0 mapping:ffff888068b63740 index:0xffff88805f9b7d90 compound_mapcount: 0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 ffff888068b66450 ffff888068b66450 ffff888068b63740 raw: ffff88805f9b7d90 0000000000100001 00000001ffffffff 0000000000000000 page dumped because: kumsan: bad access detected ================================================================== Link: http://lkml.kernel.org/r/20190613070854.10434-1-shuaibinglu@126.com Signed-off-by: Lu Shuaibing [dominique.martinet@cea.fr: grouped the added init with the others] Signed-off-by: Dominique Martinet Signed-off-by: Sasha Levin commit 448deb13ab9e2ddb3eaa00460fcd7ae0a14686b0 Author: Jia-Ju Bai Date: Fri Jul 26 15:48:53 2019 +0800 fs: nfs: Fix possible null-pointer dereferences in encode_attrs() [ Upstream commit e2751463eaa6f9fec8fea80abbdc62dbc487b3c5 ] In encode_attrs(), there is an if statement on line 1145 to check whether label is NULL: if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL)) When label is NULL, it is used on lines 1178-1181: *p++ = cpu_to_be32(label->lfs); *p++ = cpu_to_be32(label->pi); *p++ = cpu_to_be32(label->len); p = xdr_encode_opaque_fixed(p, label->label, label->len); To fix these bugs, label is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 4753e7a824cbfd91c0a795f0c794e5af3cf80f98 Author: Sascha Hauer Date: Tue Jul 2 10:00:41 2019 +0200 ima: fix freeing ongoing ahash_request [ Upstream commit 4ece3125f21b1d42b84896c5646dbf0e878464e1 ] integrity_kernel_read() can fail in which case we forward to call ahash_request_free() on a currently running request. We have to wait for its completion before we can free the request. This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0 cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem. Signed-off-by: Sascha Hauer Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin commit b69c3085fcc6839b2c86cab3b7ac9a38495a73ae Author: Sascha Hauer Date: Tue Jul 2 10:00:40 2019 +0200 ima: always return negative code for error [ Upstream commit f5e1040196dbfe14c77ce3dfe3b7b08d2d961e88 ] integrity_kernel_read() returns the number of bytes read. If this is a short read then this positive value is returned from ima_calc_file_hash_atfm(). Currently this is only indirectly called from ima_calc_file_hash() and this function only tests for the return value being zero or nonzero and also doesn't forward the return value. Nevertheless there's no point in returning a positive value as an error, so translate a short read into -EINVAL. Signed-off-by: Sascha Hauer Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin commit 6df3c66de09de4e5a4e9564e19d156480caf1050 Author: Will Deacon Date: Fri Jun 15 11:37:34 2018 +0100 arm64: cpufeature: Detect SSBS and advertise to userspace commit d71be2b6c0e19180b5f80a6d42039cc074a693a2 upstream. Armv8.5 introduces a new PSTATE bit known as Speculative Store Bypass Safe (SSBS) which can be used as a mitigation against Spectre variant 4. Additionally, a CPU may provide instructions to manipulate PSTATE.SSBS directly, so that userspace can toggle the SSBS control without trapping to the kernel. This patch probes for the existence of SSBS and advertise the new instructions to userspace if they exist. Reviewed-by: Suzuki K Poulose Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 3a0e673305e2d5420b65739fdc068fae0adf734e Author: Johannes Berg Date: Mon Sep 23 13:51:16 2019 +0200 cfg80211: initialize on-stack chandefs commit f43e5210c739fe76a4b0ed851559d6902f20ceb1 upstream. In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 16c75eb13a72a1e6be761590869b0da647dbe38f Author: Vasily Gorbik Date: Tue Sep 17 20:04:04 2019 +0200 s390/cio: avoid calling strlen on null pointer commit ea298e6ee8b34b3ed4366be7eb799d0650ebe555 upstream. Fix the following kasan finding: BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140 Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561 CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G B Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: ([<0000000231b3db7e>] show_stack+0x14e/0x1a8) [<0000000233826410>] dump_stack+0x1d0/0x218 [<000000023216fac4>] print_address_description+0x64/0x380 [<000000023216f5a8>] __kasan_report+0x138/0x168 [<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140 [<00000002332b618a>] group_store+0x3a/0x50 [<00000002323ac706>] kernfs_fop_write+0x246/0x3b8 [<00000002321d409a>] vfs_write+0x132/0x450 [<00000002321d47da>] ksys_write+0x122/0x208 [<0000000233877102>] system_call+0x2a6/0x2c8 Triggered by: openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group", O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16 write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26 The problem is that __get_next_id in ccwgroup_create_dev might set "buf" buffer pointer to NULL and explicit check for that is required. Cc: stable@vger.kernel.org Reviewed-by: Sebastian Ott Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 3f41e88f4bd44284c575ad3fb579581a16b39069 Author: Johan Hovold Date: Thu Sep 19 14:12:34 2019 +0200 ieee802154: atusb: fix use-after-free at disconnect commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream. The disconnect callback was accessing the hardware-descriptor private data after having having freed it. Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Cc: stable # 4.2 Cc: Alexander Aring Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com Signed-off-by: Johan Hovold Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 975859bb69b2e20ebbe4b059f319663ca6c783dc Author: Juergen Gross Date: Tue Oct 1 17:03:55 2019 +0200 xen/xenbus: fix self-deadlock after killing user process commit a8fabb38525c51a094607768bac3ba46b3f4a9d5 upstream. In case a user process using xenbus has open transactions and is killed e.g. via ctrl-C the following cleanup of the allocated resources might result in a deadlock due to trying to end a transaction in the xenbus worker thread: [ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds. [ 2551.492215] Tainted: P OE 5.0.0-29-generic #5 [ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2551.528585] xenbus D 0 37 2 0x80000080 [ 2551.528590] Call Trace: [ 2551.528603] __schedule+0x2c0/0x870 [ 2551.528606] ? _cond_resched+0x19/0x40 [ 2551.528632] schedule+0x2c/0x70 [ 2551.528637] xs_talkv+0x1ec/0x2b0 [ 2551.528642] ? wait_woken+0x80/0x80 [ 2551.528645] xs_single+0x53/0x80 [ 2551.528648] xenbus_transaction_end+0x3b/0x70 [ 2551.528651] xenbus_file_free+0x5a/0x160 [ 2551.528654] xenbus_dev_queue_reply+0xc4/0x220 [ 2551.528657] xenbus_thread+0x7de/0x880 [ 2551.528660] ? wait_woken+0x80/0x80 [ 2551.528665] kthread+0x121/0x140 [ 2551.528667] ? xb_read+0x1d0/0x1d0 [ 2551.528670] ? kthread_park+0x90/0x90 [ 2551.528673] ret_from_fork+0x35/0x40 Fix this by doing the cleanup via a workqueue instead. Reported-by: James Dingwall Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Cc: # 4.11 Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman commit e409b81d9ddb0dd2d70636ca24f4587f65571833 Author: Wanpeng Li Date: Mon Sep 9 09:40:28 2019 +0800 Revert "locking/pvqspinlock: Don't wait if vCPU is preempted" commit 89340d0935c9296c7b8222b6eab30e67cb57ab82 upstream. This patch reverts commit 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted). A large performance regression was caused by this commit. on over-subscription scenarios. The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads, with three VMs of 80 vCPUs each. The score of ebizzy -M is reduced from 13000-14000 records/s to 1700-1800 records/s: Host Guest score vanilla w/o kvm optimizations upstream 1700-1800 records/s vanilla w/o kvm optimizations revert 13000-14000 records/s vanilla w/ kvm optimizations upstream 4500-5000 records/s vanilla w/ kvm optimizations revert 14000-15500 records/s Exit from aggressive wait-early mechanism can result in premature yield and extra scheduling latency. Actually, only 6% of wait_early events are caused by vcpu_is_preempted() being true. However, when one vCPU voluntarily releases its vCPU, all the subsequently waiters in the queue will do the same and the cascading effect leads to bad performance. kvm optimizations: [1] commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts) [2] commit 266e85a5ec9 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption) Tested-by: loobinliu@tencent.com Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Waiman Long Cc: Paolo Bonzini Cc: Radim Krčmář Cc: loobinliu@tencent.com Cc: stable@vger.kernel.org Fixes: 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted) Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 7ed2867ceb41b7fa881dce0a0984c8bb63ed8cb4 Author: Russell King Date: Sun Sep 22 11:26:58 2019 +0100 mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence commit 121bd08b029e03404c451bb237729cdff76eafed upstream. We must not unconditionally set the DMA snoop bit; if the DMA API is assuming that the device is not DMA coherent, and the device snoops the CPU caches, the device can see stale cache lines brought in by speculative prefetch. This leads to the device seeing stale data, potentially resulting in corrupted data transfers. Commonly, this results in a descriptor fetch error such as: mmc0: ADMA error mmc0: sdhci: ============ SDHCI REGISTER DUMP =========== mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00002202 mmc0: sdhci: Blk size: 0x00000008 | Blk cnt: 0x00000001 mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013 mmc0: sdhci: Present: 0x01f50008 | Host ctl: 0x00000038 mmc0: sdhci: Power: 0x00000003 | Blk gap: 0x00000000 mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x000040d8 mmc0: sdhci: Timeout: 0x00000003 | Int stat: 0x00000001 mmc0: sdhci: Int enab: 0x037f108f | Sig enab: 0x037f108b mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202 mmc0: sdhci: Caps: 0x35fa0000 | Caps_1: 0x0000af00 mmc0: sdhci: Cmd: 0x0000333a | Max curr: 0x00000000 mmc0: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x001d8a33 mmc0: sdhci: Resp[2]: 0x325b5900 | Resp[3]: 0x3f400e00 mmc0: sdhci: Host ctl2: 0x00000000 mmc0: sdhci: ADMA Err: 0x00000009 | ADMA Ptr: 0x000000236d43820c mmc0: sdhci: ============================================ mmc0: error -5 whilst initialising SD card but can lead to other errors, and potentially direct the SDHCI controller to read/write data to other memory locations (e.g. if a valid descriptor is visible to the device in a stale cache line.) Fix this by ensuring that the DMA snoop bit corresponds with the behaviour of the DMA API. Since the driver currently only supports DT, use of_dma_is_coherent(). Note that device_get_dma_attr() can not be used as that risks re-introducing this bug if/when the driver is converted to ACPI. Signed-off-by: Russell King Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 4509a19d5082198bc7d520a8b4b5316f94062710 Author: Russell King Date: Sun Sep 22 11:26:53 2019 +0100 mmc: sdhci: improve ADMA error reporting commit d1c536e3177390da43d99f20143b810c35433d1f upstream. ADMA errors are potentially data corrupting events; although we print the register state, we do not usefully print the ADMA descriptors. Worse than that, we print them by referencing their virtual address which is meaningless when the register state gives us the DMA address of the failing descriptor. Print the ADMA descriptors giving their DMA addresses rather than their virtual addresses, and print them using SDHCI_DUMP() rather than DBG(). We also do not show the correct value of the interrupt status register; the register dump shows the current value, after we have cleared the pending interrupts we are going to service. What is more useful is to print the interrupts that _were_ pending at the time the ADMA error was encountered. Fix that too. Signed-off-by: Russell King Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 873f49d6a4e8176b2f0f6d3b5540d84b712b064e Author: Xiaolin Zhang Date: Tue Aug 27 16:39:23 2019 +0800 drm/i915/gvt: update vgpu workload head pointer correctly commit 0a3242bdb47713e09cb004a0ba4947d3edf82d8a upstream. when creating a vGPU workload, the guest context head pointer should be updated correctly by comparing with the exsiting workload in the guest worklod queue including the current running context. in some situation, there is a running context A and then received 2 new vGPU workload context B and A. in the new workload context A, it's head pointer should be updated with the running context A's tail. v2: walk through guest workload list in backward way. Cc: stable@vger.kernel.org Signed-off-by: Xiaolin Zhang Reviewed-by: Zhenyu Wang Signed-off-by: Zhenyu Wang Signed-off-by: Greg Kroah-Hartman commit 198bc7040c484d4c7be04b4eb64d5c19fbf466ce Author: Lyude Paul Date: Fri Sep 13 18:03:50 2019 -0400 drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors commit 698c1aa9f83b618de79e9e5e19a58f70a4a6ae0f upstream. On the ThinkPad P71, we have one eDP connector exposed along with 5 DP connectors, resulting in a total of 11 TMDS encoders. Since the GPU on this system is also capable of MST, we create an additional 4 fake MST encoders for each DP port. Unfortunately, we also do this for the eDP port as well, resulting in: 1 eDP port: +1 TMDS encoder +4 DPMST encoders 5 DP ports: +2 TMDS encoders +4 DPMST encoders *5 ports == 35 encoders Which breaks things, since DRM has a hard coded limit of 32 encoders. So, fix this by not creating MSTMs for any eDP connectors. This brings us down to 31 encoders, although we can do better. This fixes driver probing for nouveau on the ThinkPad P71. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs Signed-off-by: Greg Kroah-Hartman commit 7a85c86735516cdb4c44b882244fe48f3608ee7d Author: Sean Paul Date: Wed Aug 7 14:51:50 2019 -0400 drm/msm/dsi: Fix return value check for clk_get_parent commit 5fb9b797d5ccf311ae4aba69e86080d47668b5f7 upstream. clk_get_parent returns an error pointer upon failure, not NULL. So the checks as they exist won't catch a failure. This patch changes the checks and the return values to properly handle an error pointer. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Cc: Sibi Sankar Cc: Sean Paul Cc: Rob Clark Cc: # v4.19+ Signed-off-by: Sean Paul Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman commit 0e45633f49ef5c0b0fcc1a8577c837ed53f374a7 Author: Tomi Valkeinen Date: Wed Oct 2 15:25:42 2019 +0300 drm/omap: fix max fclk divider for omap36xx commit e2c4ed148cf3ec8669a1d90dc66966028e5fad70 upstream. The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen Cc: Adam Ford Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford Reviewed-by: Jyri Sarha Signed-off-by: Greg Kroah-Hartman commit 90ac4028739c5f002adc82367c3f74ac682087e9 Author: Srikar Dronamraju Date: Wed Sep 4 15:17:38 2019 +0530 perf stat: Fix a segmentation fault when using repeat forever commit 443f2d5ba13d65ccfd879460f77941875159d154 upstream. Observe a segmentation fault when 'perf stat' is asked to repeat forever with the interval option. Without fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.000211692 3,13,89,82,34,157 cycles 10.000380119 1,53,98,52,22,294 cycles 10.040467280 17,16,79,265 cycles Segmentation fault This problem was only observed when we use forever option aka -r 0 and works with limited repeats. Calling print_counter with ts being set to NULL, is not a correct option when interval is set. Hence avoid print_counter(NULL,..) if interval is set. With fix: # perf stat -r 0 -I 5000 -e cycles -a sleep 10 # time counts unit events 5.019866622 3,15,14,43,08,697 cycles 10.039865756 3,15,16,31,95,261 cycles 10.059950628 1,26,05,47,158 cycles 5.009902655 3,14,52,62,33,932 cycles 10.019880228 3,14,52,22,89,154 cycles 10.030543876 66,90,18,333 cycles 5.009848281 3,14,51,98,25,437 cycles 10.029854402 3,15,14,93,04,918 cycles 5.009834177 3,14,51,95,92,316 cycles Committer notes: Did the 'git bisect' to find the cset introducing the problem to add the Fixes tag below, and at that time the problem reproduced as: (gdb) run stat -r0 -I500 sleep 1 Program received signal SIGSEGV, Segmentation fault. print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 866 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep); (gdb) bt #0 print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866 #1 0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938 #2 0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=) at builtin-stat.c:1411 #3 0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 , argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370 #4 0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429 #5 0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473 #6 0x000000000045cac9 in main (argc=, argv=) at perf.c:588 (gdb) Mostly the same as just before this patch: Program received signal SIGSEGV, Segmentation fault. 0x00000000005874a7 in print_interval (config=0xa1f2a0 , evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 964 sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep); (gdb) bt #0 0x00000000005874a7 in print_interval (config=0xa1f2a0 , evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964 #1 0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 , _target=0xa1f0c0 , ts=0x0, argc=2, argv=0x7fffffffd670) at util/stat-display.c:1172 #2 0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656 #3 0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960 #4 0x00000000004dd2e0 in run_builtin (p=0xa30e00 , argc=5, argv=0x7fffffffd670) at perf.c:310 #5 0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362 #6 0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406 #7 0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531 (gdb) Fixes: d4f63a4741a8 ("perf stat: Introduce print_counters function") Signed-off-by: Srikar Dronamraju Acked-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Tested-by: Ravi Bangoria Cc: Namhyung Kim Cc: Naveen N. Rao Cc: stable@vger.kernel.org # v4.2+ Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 22f28afd3d7753d3ea6b79e2fac604a39d2bc350 Author: Rasmus Villemoes Date: Mon Aug 12 15:13:56 2019 +0200 watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout commit 144783a80cd2cbc45c6ce17db649140b65f203dd upstream. Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman commit e7cf8cc79f93c5b7b410026ce4e3624da8752170 Author: Sumit Saxena Date: Fri Jul 26 00:55:52 2019 +0530 PCI: Restore Resizable BAR size bits correctly for 1MB BARs commit d2182b2d4b71ff0549a07f414d921525fade707b upstream. In a Resizable BAR Control Register, bits 13:8 control the size of the BAR. The encoded values of these bits are as follows (see PCIe r5.0, sec 7.8.6.3): Value BAR size 0 1 MB (2^20 bytes) 1 2 MB (2^21 bytes) 2 4 MB (2^22 bytes) ... 43 8 EB (2^63 bytes) Previously we incorrectly set the BAR size bits for a 1 MB BAR to 0x1f instead of 0, so devices that support that size, e.g., new megaraid_sas and mpt3sas adapters, fail to initialize during resume from S3 sleep. Correctly calculate the BAR size bits for Resizable BAR control registers. Link: https://lore.kernel.org/r/20190725192552.24295-1-sumit.saxena@broadcom.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203939 Fixes: d3252ace0bc6 ("PCI: Restore resized BAR state on resume") Signed-off-by: Sumit Saxena Signed-off-by: Bjorn Helgaas Reviewed-by: Christian König Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman commit 956ce989c41f70f945a36827cf5c74a1439ef5ae Author: Jon Derrick Date: Mon Sep 16 07:54:35 2019 -0600 PCI: vmd: Fix shadow offsets to reflect spec changes commit a1a30170138c9c5157bd514ccd4d76b47060f29b upstream. The shadow offset scratchpad was moved to 0x2000-0x2010. Update the location to get the correct shadow offset. Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers") Signed-off-by: Jon Derrick Signed-off-by: Lorenzo Pieralisi Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Greg Kroah-Hartman commit 06f250215bebc57a5d90604afff9e4f1b35e2e52 Author: Li RongQing Date: Thu Sep 19 20:04:47 2019 +0800 timer: Read jiffies once when forwarding base clk commit e430d802d6a3aaf61bd3ed03d9404888a29b9bf9 upstream. The timer delayed for more than 3 seconds warning was triggered during testing. Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xee/0x100 ... Call Trace: process_one_work+0x18c/0x3a0 worker_thread+0x30/0x380 kthread+0x113/0x130 ret_from_fork+0x22/0x40 The reason is that the code in collect_expired_timers() uses jiffies unprotected: if (next_event > jiffies) base->clk = jiffies; As the compiler is allowed to reload the value base->clk can advance between the check and the store and in the worst case advance farther than next event. That causes the timer expiry to be delayed until the wheel pointer wraps around. Convert the code to use READ_ONCE() Fixes: 236968383cf5 ("timers: Optimize collect_expired_timers() for NOHZ") Signed-off-by: Li RongQing Signed-off-by: Liang ZhiCheng Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.com Signed-off-by: Greg Kroah-Hartman commit 12c6c4a50f66d2fc997e504e5aa942c0ed45177c Author: Kees Cook Date: Tue Sep 17 11:00:25 2019 -0700 usercopy: Avoid HIGHMEM pfn warning commit 314eed30ede02fa925990f535652254b5bad6b65 upstream. When running on a system with >512MB RAM with a 32-bit kernel built with: CONFIG_DEBUG_VIRTUAL=y CONFIG_HIGHMEM=y CONFIG_HARDENED_USERCOPY=y all execve()s will fail due to argv copying into kmap()ed pages, and on usercopy checking the calls ultimately of virt_to_page() will be looking for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y: ------------[ cut here ]------------ kernel BUG at ../arch/x86/mm/physaddr.c:83! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009 EIP: __phys_addr+0xaf/0x100 ... Call Trace: __check_object_size+0xaf/0x3c0 ? __might_sleep+0x80/0xa0 copy_strings+0x1c2/0x370 copy_strings_kernel+0x2b/0x40 __do_execve_file+0x4ca/0x810 ? kmem_cache_alloc+0x1c7/0x370 do_execve+0x1b/0x20 ... The check is from arch/x86/mm/physaddr.c: VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn); Due to the kmap() in fs/exec.c: kaddr = kmap(kmapped_page); ... if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ... Now we can fetch the correct page to avoid the pfn check. In both cases, hardened usercopy will need to walk the page-span checker (if enabled) to do sanity checking. Reported-by: Randy Dunlap Tested-by: Randy Dunlap Fixes: f5509cc18daa ("mm: Hardened usercopy") Cc: Matthew Wilcox Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Reviewed-by: Matthew Wilcox (Oracle) Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescook Signed-off-by: Greg Kroah-Hartman commit e010c98351838230e00359fbd3e37b3444dc09fd Author: Tom Zanussi Date: Sun Sep 1 17:02:01 2019 -0500 tracing: Make sure variable reference alias has correct var_ref_idx commit 17f8607a1658a8e70415eef67909f990d13017b5 upstream. Original changelog from Steve Rostedt (except last sentence which explains the problem, and the Fixes: tag): I performed a three way histogram with the following commands: echo 'irq_lat u64 lat pid_t pid' > synthetic_events echo 'wake_lat u64 lat u64 irqlat pid_t pid' >> synthetic_events echo 'hist:keys=common_pid:irqts=common_timestamp.usecs if function == 0xffffffff81200580' > events/timer/hrtimer_start/trigger echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$irqts:onmatch(timer.hrtimer_start).irq_lat($lat,pid) if common_flags & 1' > events/sched/sched_waking/trigger echo 'hist:keys=pid:wakets=common_timestamp.usecs,irqlat=lat' > events/synthetic/irq_lat/trigger echo 'hist:keys=next_pid:lat=common_timestamp.usecs-$wakets,irqlat=$irqlat:onmatch(synthetic.irq_lat).wake_lat($lat,$irqlat,next_pid)' > events/sched/sched_switch/trigger echo 1 > events/synthetic/wake_lat/enable Basically I wanted to see: hrtimer_start (calling function tick_sched_timer) Note: # grep tick_sched_timer /proc/kallsyms ffffffff81200580 t tick_sched_timer And save the time of that, and then record sched_waking if it is called in interrupt context and with the same pid as the hrtimer_start, it will record the latency between that and the waking event. I then look at when the task that is woken is scheduled in, and record the latency between the wakeup and the task running. At the end, the wake_lat synthetic event will show the wakeup to scheduled latency, as well as the irq latency in from hritmer_start to the wakeup. The problem is that I found this: -0 [007] d... 190.485261: wake_lat: lat=27 irqlat=190485230 pid=698 -0 [005] d... 190.485283: wake_lat: lat=40 irqlat=190485239 pid=10 -0 [002] d... 190.488327: wake_lat: lat=56 irqlat=190488266 pid=335 -0 [005] d... 190.489330: wake_lat: lat=64 irqlat=190489262 pid=10 -0 [003] d... 190.490312: wake_lat: lat=43 irqlat=190490265 pid=77 -0 [005] d... 190.493322: wake_lat: lat=54 irqlat=190493262 pid=10 -0 [005] d... 190.497305: wake_lat: lat=35 irqlat=190497267 pid=10 -0 [005] d... 190.501319: wake_lat: lat=50 irqlat=190501264 pid=10 The irqlat seemed quite large! Investigating this further, if I had enabled the irq_lat synthetic event, I noticed this: -0 [002] d.s. 249.429308: irq_lat: lat=164968 pid=335 -0 [002] d... 249.429369: wake_lat: lat=55 irqlat=249429308 pid=335 Notice that the timestamp of the irq_lat "249.429308" is awfully similar to the reported irqlat variable. In fact, all instances were like this. It appeared that: irqlat=$irqlat Wasn't assigning the old $irqlat to the new irqlat variable, but instead was assigning the $irqts to it. The issue is that assigning the old $irqlat to the new irqlat variable creates a variable reference alias, but the alias creation code forgets to make sure the alias uses the same var_ref_idx to access the reference. Link: http://lkml.kernel.org/r/1567375321.5282.12.camel@kernel.org Cc: Linux Trace Devel Cc: linux-rt-users Cc: stable@vger.kernel.org Fixes: 7e8b88a30b085 ("tracing: Add hist trigger support for variable reference aliases") Reported-by: Steven Rostedt (VMware) Signed-off-by: Tom Zanussi Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman commit 022ca58f109ef7429ef91286cd3a813fbf45dfea Author: Michael Nosthoff Date: Fri Aug 16 09:58:42 2019 +0200 power: supply: sbs-battery: only return health when battery present commit fe55e770327363304c4111423e6f7ff3c650136d upstream. when the battery is set to sbs-mode and no gpio detection is enabled "health" is always returning a value even when the battery is not present. All other fields return "not present". This leads to a scenario where the driver is constantly switching between "present" and "not present" state. This generates a lot of constant traffic on the i2c. This commit changes the response of "health" to an error when the battery is not responding leading to a consistent "not present" state. Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: Signed-off-by: Michael Nosthoff Reviewed-by: Brian Norris Tested-by: Brian Norris Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit 5cb6dd823127a449f4082b16b2b6508ff2a6289b Author: Michael Nosthoff Date: Fri Aug 16 09:37:42 2019 +0200 power: supply: sbs-battery: use correct flags field commit 99956a9e08251a1234434b492875b1eaff502a12 upstream. the type flag is stored in the chip->flags field not in the client->flags field. This currently leads to never using the ti specific health function as client->flags doesn't use that bit. So it's always falling back to the general one. Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats") Cc: Signed-off-by: Michael Nosthoff Reviewed-by: Brian Norris Reviewed-by: Enric Balletbo i Serra Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman commit fb93ccde081e39631fd16c03d1c9eb0b4bef7edd Author: Jiaxun Yang Date: Wed May 29 16:42:59 2019 +0800 MIPS: Treat Loongson Extensions as ASEs commit d2f965549006acb865c4638f1f030ebcefdc71f6 upstream. Recently, binutils had split Loongson-3 Extensions into four ASEs: MMI, CAM, EXT, EXT2. This patch do the samething in kernel and expose them in cpuinfo so applications can probe supported ASEs at runtime. Signed-off-by: Jiaxun Yang Cc: Huacai Chen Cc: Yunqiang Su Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit a0dc60ac6bef99fe8c00bbebffa66b704c075d15 Author: Gilad Ben-Yossef Date: Mon Jul 29 13:40:18 2019 +0300 crypto: ccree - use the full crypt length value commit 7a4be6c113c1f721818d1e3722a9015fe393295c upstream. In case of AEAD decryption verifcation error we were using the wrong value to zero out the plaintext buffer leaving the end of the buffer with the false plaintext. Signed-off-by: Gilad Ben-Yossef Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support") CC: stable@vger.kernel.org # v4.17+ Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit f5c087a0d9a0e31b4a97ebba3b5eb263f1a6c24f Author: Gilad Ben-Yossef Date: Tue Jul 2 14:39:19 2019 +0300 crypto: ccree - account for TEE not ready to report commit 76a95bd8f9e10cade9c4c8df93b5c20ff45dc0f5 upstream. When ccree driver runs it checks the state of the Trusted Execution Environment CryptoCell driver before proceeding. We did not account for cases where the TEE side is not ready or not available at all. Fix it by only considering TEE error state after sync with the TEE side driver. Signed-off-by: Gilad Ben-Yossef Fixes: ab8ec9658f5a ("crypto: ccree - add FIPS support") CC: stable@vger.kernel.org # v4.17+ Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 561bf9309209e174035eaee0edfc3247ecfdff76 Author: Horia Geantă Date: Tue Jul 30 08:48:33 2019 +0300 crypto: caam - fix concurrency issue in givencrypt descriptor commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream. IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed to be scheduled before the data transfer from ofifo to external memory (set up at [38]: [29] 10FA0004 ld: ind-nfifo (len=4) imm [30] 81F00010 class2 type=msg len=16> [31] 14820004 ld: ccb2-datasz len=4 offs=0 imm [32] 00000010 data:0x00000010 [33] 8210010D operation: cls1-op aes cbc init-final enc [34] A8080B04 math: (seqin + math0)->vseqout len=4 [35] 28000010 seqfifold: skip len=16 [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [38] 69300000 seqfifostr: msg len=vseqoutsz [39] 5C20000C seqstr: ccb2 ctx len=12 offs=0 If ofifo -> external memory transfer happens first, DECO will hang (issuing a Watchdog Timeout error, if WDOG is enabled) waiting for data availability in ofifo for the ofifo -> c2 ififo transfer. Make sure IV transfer happens first by waiting for all CAAM internal transfers to end before starting payload transfer. New descriptor with jump command inserted at [37]: [..] [36] A8080A04 math: (seqin + math0)->vseqin len=4 [37] A1000401 jump: jsl1 all-match[!nfifopend] offset=[01] local->[38] [38] 2F1E0000 seqfifold: both msg1->2-last2-last1 len=vseqinsz [39] 69300000 seqfifostr: msg len=vseqoutsz [40] 5C20000C seqstr: ccb2 ctx len=12 offs=0 [Note: the issue is present in the descriptor from the very beginning (cf. Fixes tag). However I've marked it v4.19+ since it's the oldest maintained kernel that the patch applies clean against.] Cc: # v4.19+ Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 3683dd7074dcda394cc4f976c5ef26fbb9dfb11c Author: Wei Yongjun Date: Wed Sep 4 14:18:09 2019 +0000 crypto: cavium/zip - Add missing single_release() commit c552ffb5c93d9d65aaf34f5f001c4e7e8484ced1 upstream. When using single_open() for opening, single_release() should be used instead of seq_release(), otherwise there is a memory leak. Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics") Cc: Signed-off-by: Wei Yongjun Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit cd8e0a5d94fba7c6032484ac89254940bad9b537 Author: Herbert Xu Date: Fri Sep 6 13:13:06 2019 +1000 crypto: skcipher - Unmap pages after an external error commit 0ba3c026e685573bd3534c17e27da7c505ac99c4 upstream. skcipher_walk_done may be called with an error by internal or external callers. For those internal callers we shouldn't unmap pages but for external callers we must unmap any pages that are in use. This patch distinguishes between the two cases by checking whether walk->nbytes is zero or not. For internal callers, we now set walk->nbytes to zero prior to the call. For external callers, walk->nbytes has always been non-zero (as zero is used to indicate the termination of a walk). Reported-by: Ard Biesheuvel Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type") Cc: Signed-off-by: Herbert Xu Tested-by: Ard Biesheuvel Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 9349108ae499b352ce1605076a9b74ec450bbb75 Author: Alexander Sverdlin Date: Tue Jul 23 07:24:01 2019 +0000 crypto: qat - Silence smp_processor_id() warning commit 1b82feb6c5e1996513d0fb0bbb475417088b4954 upstream. It seems that smp_processor_id() is only used for a best-effort load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible to disable preemption for the duration of the crypto requests. Therefore, just silence the warning. This commit is similar to e7a9b05ca4 ("crypto: cavium - Fix smp_processor_id() warnings"). Silences the following splat: BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904 caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P O 4.14.69 #1 ... Call Trace: dump_stack+0x5f/0x86 check_preemption_disabled+0xd3/0xe0 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat] skcipher_setkey_ablkcipher+0x2b/0x40 __test_skcipher+0x1f3/0xb20 ? cpumask_next_and+0x26/0x40 ? find_busiest_group+0x10e/0x9d0 ? preempt_count_add+0x49/0xa0 ? try_module_get+0x61/0xf0 ? crypto_mod_get+0x15/0x30 ? __kmalloc+0x1df/0x1f0 ? __crypto_alloc_tfm+0x116/0x180 ? crypto_skcipher_init_tfm+0xa6/0x180 ? crypto_create_tfm+0x4b/0xf0 test_skcipher+0x21/0xa0 alg_test_skcipher+0x3f/0xa0 alg_test.part.6+0x126/0x2a0 ? finish_task_switch+0x21b/0x260 ? __schedule+0x1e9/0x800 ? __wake_up_common+0x8d/0x140 cryptomgr_test+0x40/0x50 kthread+0xff/0x130 ? cryptomgr_notify+0x540/0x540 ? kthread_create_on_node+0x70/0x70 ret_from_fork+0x24/0x50 Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 532920b2667814fbdf1220343433f78f86b9cab8 Author: Steven Rostedt (VMware) Date: Mon Aug 5 13:01:50 2019 -0400 tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file commit 82a2f88458d70704be843961e10b5cef9a6e95d3 upstream. The tools/lib/traceevent/Makefile had a test added to it to detect a failure of the "nm" when making the dynamic list file (whatever that is). The problem is that the test sorts the values "U W w" and some versions of sort will place "w" ahead of "W" (even though it has a higher ASCII value, and break the test. Add 'tr "w" "W"' to merge the two and not worry about the ordering. Reported-by: Tzvetomir Stoyanov Signed-off-by: Steven Rostedt (VMware) Cc: Alexander Shishkin Cc: David Carrillo-Cisneros Cc: He Kuang Cc: Jiri Olsa Cc: Michal rarek Cc: Paul Turner Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Uwe Kleine-König Cc: Wang Nan Cc: stable@vger.kernel.org Fixes: 6467753d61399 ("tools lib traceevent: Robustify do_generate_dynamic_list_file") Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit 4aaea17d3c31464ecd783c9a0f554080d2298c09 Author: Marc Kleine-Budde Date: Tue Aug 13 16:01:02 2019 +0200 can: mcp251x: mcp251x_hw_reset(): allow more time after a reset commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream. Some boards take longer than 5ms to power up after a reset, so allow some retries attempts before giving up. Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()") Cc: linux-stable Tested-by: Sean Nyekjaer Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 9124eac41a672b92c030d95e1fbd079740faab6c Author: Aneesh Kumar K.V Date: Tue Sep 24 09:22:51 2019 +0530 powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions commit 677733e296b5c7a37c47da391fc70a43dc40bd67 upstream. The store ordering vs tlbie issue mentioned in commit a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't need to apply the fixup if we are running on them We can only do this on PowerNV. On pseries guest with KVM we still don't support redoing the feature fixup after migration. So we should be enabling all the workarounds needed, because whe can possibly migrate between DD 2.3 and DD 2.2 Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190924035254.24612-1-aneesh.kumar@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit 19c12f12093e8bc86994a1480673003c67215e69 Author: Alexey Kardashevskiy Date: Thu Jul 18 15:11:36 2019 +1000 powerpc/powernv/ioda: Fix race in TCE level allocation commit 56090a3902c80c296e822d11acdb6a101b322c52 upstream. pnv_tce() returns a pointer to a TCE entry and originally a TCE table would be pre-allocated. For the default case of 2GB window the table needs only a single level and that is fine. However if more levels are requested, it is possible to get a race when 2 threads want a pointer to a TCE entry from the same page of TCEs. This adds cmpxchg to handle the race. Note that once TCE is non-zero, it cannot become zero again. Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand") CC: stable@vger.kernel.org # v4.19+ Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190718051139.74787-2-aik@ozlabs.ru Signed-off-by: Greg Kroah-Hartman commit 032ce7d766a9846167916cb0713ab91b2de9cbdf Author: Andrew Donnellan Date: Fri May 3 17:52:53 2019 +1000 powerpc/powernv: Restrict OPAL symbol map to only be readable by root commit e7de4f7b64c23e503a8c42af98d56f2a7462bd6d upstream. Currently the OPAL symbol map is globally readable, which seems bad as it contains physical addresses. Restrict it to root. Fixes: c8742f85125d ("powerpc/powernv: Expose OPAL firmware symbol map") Cc: stable@vger.kernel.org # v3.19+ Suggested-by: Michael Ellerman Signed-off-by: Andrew Donnellan Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit ba3ca9fcb0e7ea897f777f10b0a33b4d27e9e658 Author: Santosh Sivaraj Date: Tue Aug 20 13:43:46 2019 +0530 powerpc/mce: Schedule work from irq_work commit b5bda6263cad9a927e1a4edb7493d542da0c1410 upstream. schedule_work() cannot be called from MCE exception context as MCE can interrupt even in interrupt disabled context. Fixes: 733e4a4c4467 ("powerpc/mce: hookup memory_failure for UE errors") Cc: stable@vger.kernel.org # v4.15+ Reviewed-by: Mahesh Salgaonkar Reviewed-by: Nicholas Piggin Acked-by: Balbir Singh Signed-off-by: Santosh Sivaraj Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190820081352.8641-2-santosh@fossix.org Signed-off-by: Greg Kroah-Hartman commit ee6eeeb88e799abd4e3ba42063b97786a212428e Author: Balbir Singh Date: Tue Aug 20 13:43:47 2019 +0530 powerpc/mce: Fix MCE handling for huge pages commit 99ead78afd1128bfcebe7f88f3b102fb2da09aee upstream. The current code would fail on huge pages addresses, since the shift would be incorrect. Use the correct page shift value returned by __find_linux_pte() to get the correct physical address. The code is more generic and can handle both regular and compound pages. Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors") Signed-off-by: Balbir Singh [arbab@linux.ibm.com: Fixup pseries_do_memory_failure()] Signed-off-by: Reza Arbab Tested-by: Mahesh Salgaonkar Signed-off-by: Santosh Sivaraj Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190820081352.8641-3-santosh@fossix.org Signed-off-by: Greg Kroah-Hartman commit 1284f2073415a4c7b978abeb7e70be845fd501bd Author: Oleksandr Suvorov Date: Fri Jul 19 10:05:31 2019 +0000 ASoC: sgtl5000: Improve VAG power and mute control commit b1f373a11d25fc9a5f7679c9b85799fe09b0dc4a upstream. VAG power control is improved to fit the manual [1]. This patch fixes as minimum one bug: if customer muxes Headphone to Line-In right after boot, the VAG power remains off that leads to poor sound quality from line-in. I.e. after boot: - Connect sound source to Line-In jack; - Connect headphone to HP jack; - Run following commands: $ amixer set 'Headphone' 80% $ amixer set 'Headphone Mux' LINE_IN Change VAG power on/off control according to the following algorithm: - turn VAG power ON on the 1st incoming event. - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In). - turn VAG power OFF when there is the latest consumer's pre-down event come. - always delay after VAG power OFF to avoid pop. - delay after VAG power ON if the initiative consumer is Line-In, this prevents pop during line-in muxing. According to the data sheet [1], to avoid any pops/clicks, the outputs should be muted during input/output routing changes. [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf Cc: stable@vger.kernel.org Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Oleksandr Suvorov Reviewed-by: Marcel Ziswiler Reviewed-by: Fabio Estevam Reviewed-by: Cezary Rojewski Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 50090b75fa89b742e19a5e533c080662a8ca67e3 Author: Oleksandr Suvorov Date: Fri Jul 19 10:05:30 2019 +0000 ASoC: Define a set of DAPM pre/post-up events commit cfc8f568aada98f9608a0a62511ca18d647613e2 upstream. Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to reduce coming code size and make it more readable. Cc: stable@vger.kernel.org Signed-off-by: Oleksandr Suvorov Reviewed-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit 42b888f63333091a0d12423b46fa8e0a78ec9686 Author: Dmitry Osipenko Date: Thu May 2 02:38:00 2019 +0300 PM / devfreq: tegra: Fix kHz to Hz conversion commit 62bacb06b9f08965c4ef10e17875450490c948c0 upstream. The kHz to Hz is incorrectly converted in a few places in the code, this results in a wrong frequency being calculated because devfreq core uses OPP frequencies that are given in Hz to clamp the rate, while tegra-devfreq gives to the core value in kHz and then it also expects to receive value in kHz from the core. In a result memory freq is always set to a value which is close to ULONG_MAX because of the bug. Hence the EMC frequency is always capped to the maximum and the driver doesn't do anything useful. This patch was tested on Tegra30 and Tegra124 SoC's, EMC frequency scaling works properly now. Cc: # 4.14+ Tested-by: Steev Klimaszewski Reviewed-by: Chanwoo Choi Signed-off-by: Dmitry Osipenko Acked-by: Thierry Reding Signed-off-by: MyungJoo Ham Signed-off-by: Greg Kroah-Hartman commit 9f0f39c92e4f50189155dfb13bb5524372e40eba Author: Mike Christie Date: Sun Aug 4 14:10:06 2019 -0500 nbd: fix max number of supported devs commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 upstream. This fixes a bug added in 4.10 with commit: commit 9561a7ade0c205bc2ee035a2ac880478dcc1a024 Author: Josef Bacik Date: Tue Nov 22 14:04:40 2016 -0500 nbd: add multi-connection support that limited the number of devices to 256. Before the patch we could create 1000s of devices, but the patch switched us from using our own thread to using a work queue which has a default limit of 256 active works. The problem is that our recv_work function sits in a loop until disconnection but only handles IO for one connection. The work is started when the connection is started/restarted, but if we end up creating 257 or more connections, the queue_work call just queues connection257+'s recv_work and that waits for connection 1 - 256's recv_work to be disconnected and that work instance completing. Instead of reverting back to kthreads, this has us allocate a workqueue_struct per device, so we can block in the work. Cc: stable@vger.kernel.org Reviewed-by: Josef Bacik Signed-off-by: Mike Christie Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit eff3a54aae6815583d139dd22417e3d706ef6490 Author: Jack Wang Date: Mon Oct 7 14:36:53 2019 +0200 KVM: nVMX: handle page fault in vmread fix During backport f7eea636c3d5 ("KVM: nVMX: handle page fault in vmread"), there was a mistake the exception reference should be passed to function kvm_write_guest_virt_system, instead of NULL, other wise, we will get NULL pointer deref, eg kvm-unit-test triggered a NULL pointer deref below: [ 948.518437] kvm [24114]: vcpu0, guest rIP: 0x407ef9 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x3, nop [ 949.106464] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 949.106707] PGD 0 P4D 0 [ 949.106872] Oops: 0002 [#1] SMP [ 949.107038] CPU: 2 PID: 24126 Comm: qemu-2.7 Not tainted 4.19.77-pserver #4.19.77-1+feature+daily+update+20191005.1625+a4168bb~deb9 [ 949.107283] Hardware name: Dell Inc. Precision Tower 3620/09WH54, BIOS 2.7.3 01/31/2018 [ 949.107549] RIP: 0010:kvm_write_guest_virt_system+0x12/0x40 [kvm] [ 949.107719] Code: c0 5d 41 5c 41 5d 41 5e 83 f8 03 41 0f 94 c0 41 c1 e0 02 e9 b0 ed ff ff 0f 1f 44 00 00 48 89 f0 c6 87 59 56 00 00 01 48 89 d6 <49> c7 00 00 00 00 00 89 ca 49 c7 40 08 00 00 00 00 49 c7 40 10 00 [ 949.108044] RSP: 0018:ffffb31b0a953cb0 EFLAGS: 00010202 [ 949.108216] RAX: 000000000046b4d8 RBX: ffff9e9f415b0000 RCX: 0000000000000008 [ 949.108389] RDX: ffffb31b0a953cc0 RSI: ffffb31b0a953cc0 RDI: ffff9e9f415b0000 [ 949.108562] RBP: 00000000d2e14928 R08: 0000000000000000 R09: 0000000000000000 [ 949.108733] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffc8 [ 949.108907] R13: 0000000000000002 R14: ffff9e9f4f26f2e8 R15: 0000000000000000 [ 949.109079] FS: 00007eff8694c700(0000) GS:ffff9e9f51a80000(0000) knlGS:0000000031415928 [ 949.109318] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 949.109495] CR2: 0000000000000000 CR3: 00000003be53b002 CR4: 00000000003626e0 [ 949.109671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 949.109845] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 949.110017] Call Trace: [ 949.110186] handle_vmread+0x22b/0x2f0 [kvm_intel] [ 949.110356] ? vmexit_fill_RSB+0xc/0x30 [kvm_intel] [ 949.110549] kvm_arch_vcpu_ioctl_run+0xa98/0x1b30 [kvm] [ 949.110725] ? kvm_vcpu_ioctl+0x388/0x5d0 [kvm] [ 949.110901] kvm_vcpu_ioctl+0x388/0x5d0 [kvm] [ 949.111072] do_vfs_ioctl+0xa2/0x620 Signed-off-by: Jack Wang Acked-by: Paolo Bonzini commit 21874027e1deba5a5b8edaa6de8e49a4a2dd99b3 Author: Wanpeng Li Date: Wed Sep 18 17:50:10 2019 +0800 KVM: X86: Fix userspace set invalid CR4 commit 3ca94192278ca8de169d78c085396c424be123b3 upstream. Reported by syzkaller: WARNING: CPU: 0 PID: 6544 at /home/kernel/data/kvm/arch/x86/kvm//vmx/vmx.c:4689 handle_desc+0x37/0x40 [kvm_intel] CPU: 0 PID: 6544 Comm: a.out Tainted: G OE 5.3.0-rc4+ #4 RIP: 0010:handle_desc+0x37/0x40 [kvm_intel] Call Trace: vmx_handle_exit+0xbe/0x6b0 [kvm_intel] vcpu_enter_guest+0x4dc/0x18d0 [kvm] kvm_arch_vcpu_ioctl_run+0x407/0x660 [kvm] kvm_vcpu_ioctl+0x3ad/0x690 [kvm] do_vfs_ioctl+0xa2/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x74/0x720 entry_SYSCALL_64_after_hwframe+0x49/0xbe When CR4.UMIP is set, guest should have UMIP cpuid flag. Current kvm set_sregs function doesn't have such check when userspace inputs sregs values. SECONDARY_EXEC_DESC is enabled on writes to CR4.UMIP in vmx_set_cr4 though guest doesn't have UMIP cpuid flag. The testcast triggers handle_desc warning when executing ltr instruction since guest architectural CR4 doesn't set UMIP. This patch fixes it by adding valid CR4 and CPUID combination checking in __set_sregs. syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=138efb99600000 Reported-by: syzbot+0f1819555fbdce992df9@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 30fbe0d380aa038b0a629bc9c7f1961d340cd83b Author: Paul Mackerras Date: Tue Aug 27 11:35:40 2019 +1000 KVM: PPC: Book3S HV: Don't lose pending doorbell request on migration on P9 commit ff42df49e75f053a8a6b4c2533100cdcc23afe69 upstream. On POWER9, when userspace reads the value of the DPDES register on a vCPU, it is possible for 0 to be returned although there is a doorbell interrupt pending for the vCPU. This can lead to a doorbell interrupt being lost across migration. If the guest kernel uses doorbell interrupts for IPIs, then it could malfunction because of the lost interrupt. This happens because a newly-generated doorbell interrupt is signalled by setting vcpu->arch.doorbell_request to 1; the DPDES value in vcpu->arch.vcore->dpdes is not updated, because it can only be updated when holding the vcpu mutex, in order to avoid races. To fix this, we OR in vcpu->arch.doorbell_request when reading the DPDES value. Cc: stable@vger.kernel.org # v4.13+ Fixes: 579006944e0d ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9") Signed-off-by: Paul Mackerras Tested-by: Alexey Kardashevskiy Signed-off-by: Greg Kroah-Hartman commit 4faa7f05af75f6c74c8ce25259e0d034f87526db Author: Paul Mackerras Date: Tue Aug 27 11:31:37 2019 +1000 KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores commit d28eafc5a64045c78136162af9d4ba42f8230080 upstream. When we are running multiple vcores on the same physical core, they could be from different VMs and so it is possible that one of the VMs could have its arch.mmu_ready flag cleared (for example by a concurrent HPT resize) when we go to run it on a physical core. We currently check the arch.mmu_ready flag for the primary vcore but not the flags for the other vcores that will be run alongside it. This adds that check, and also a check when we select the secondary vcores from the preempted vcores list. Cc: stable@vger.kernel.org # v4.14+ Fixes: 38c53af85306 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates") Signed-off-by: Paul Mackerras Signed-off-by: Greg Kroah-Hartman commit 577a5119d7af31f77f5c427be9867431df070d0d Author: Paul Mackerras Date: Tue Aug 13 20:03:49 2019 +1000 KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts commit 959c5d5134786b4988b6fdd08e444aa67d1667ed upstream. Escalation interrupts are interrupts sent to the host by the XIVE hardware when it has an interrupt to deliver to a guest VCPU but that VCPU is not running anywhere in the system. Hence we disable the escalation interrupt for the VCPU being run when we enter the guest and re-enable it when the guest does an H_CEDE hypercall indicating it is idle. It is possible that an escalation interrupt gets generated just as we are entering the guest. In that case the escalation interrupt may be using a queue entry in one of the interrupt queues, and that queue entry may not have been processed when the guest exits with an H_CEDE. The existing entry code detects this situation and does not clear the vcpu->arch.xive_esc_on flag as an indication that there is a pending queue entry (if the queue entry gets processed, xive_esc_irq() will clear the flag). There is a comment in the code saying that if the flag is still set on H_CEDE, we have to abort the cede rather than re-enabling the escalation interrupt, lest we end up with two occurrences of the escalation interrupt in the interrupt queue. However, the exit code doesn't do that; it aborts the cede in the sense that vcpu->arch.ceded gets cleared, but it still enables the escalation interrupt by setting the source's PQ bits to 00. Instead we need to set the PQ bits to 10, indicating that an interrupt has been triggered. We also need to avoid setting vcpu->arch.xive_esc_on in this case (i.e. vcpu->arch.xive_esc_on seen to be set on H_CEDE) because xive_esc_irq() will run at some point and clear it, and if we race with that we may end up with an incorrect result (i.e. xive_esc_on set when the escalation interrupt has just been handled). It is extremely unlikely that having two queue entries would cause observable problems; theoretically it could cause queue overflow, but the CPU would have to have thousands of interrupts targetted to it for that to be possible. However, this fix will also make it possible to determine accurately whether there is an unhandled escalation interrupt in the queue, which will be needed by the following patch. Fixes: 9b9b13a6d153 ("KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Paul Mackerras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190813100349.GD9567@blackberry Signed-off-by: Greg Kroah-Hartman commit 46cb14a570889a693c4ca24c0a6d4be4dc18f8f4 Author: Vasily Gorbik Date: Thu Sep 19 15:55:17 2019 +0200 s390/cio: exclude subchannels with no parent from pseudo check commit ab5758848039de9a4b249d46e4ab591197eebaf2 upstream. ccw console is created early in start_kernel and used before css is initialized or ccw console subchannel is registered. Until then console subchannel does not have a parent. For that reason assume subchannels with no parent are not pseudo subchannels. This fixes the following kasan finding: BUG: KASAN: global-out-of-bounds in sch_is_pseudo_sch+0x8e/0x98 Read of size 8 at addr 00000000000005e8 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc8-07370-g6ac43dd12538 #2 Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) Call Trace: ([<000000000012cd76>] show_stack+0x14e/0x1e0) [<0000000001f7fb44>] dump_stack+0x1a4/0x1f8 [<00000000007d7afc>] print_address_description+0x64/0x3c8 [<00000000007d75f6>] __kasan_report+0x14e/0x180 [<00000000018a2986>] sch_is_pseudo_sch+0x8e/0x98 [<000000000189b950>] cio_enable_subchannel+0x1d0/0x510 [<00000000018cac7c>] ccw_device_recognition+0x12c/0x188 [<0000000002ceb1a8>] ccw_device_enable_console+0x138/0x340 [<0000000002cf1cbe>] con3215_init+0x25e/0x300 [<0000000002c8770a>] console_init+0x68a/0x9b8 [<0000000002c6a3d6>] start_kernel+0x4fe/0x728 [<0000000000100070>] startup_continue+0x70/0xd0 Cc: stable@vger.kernel.org Reviewed-by: Sebastian Ott Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 9aa823b3c0a6997092c5e0f7efc63d27479afb42 Author: Vasily Gorbik Date: Tue Sep 17 22:59:03 2019 +0200 s390/topology: avoid firing events before kobjs are created commit f3122a79a1b0a113d3aea748e0ec26f2cb2889de upstream. arch_update_cpu_topology is first called from: kernel_init_freeable->sched_init_smp->sched_init_domains even before cpus has been registered in: kernel_init_freeable->do_one_initcall->s390_smp_init Do not trigger kobject_uevent change events until cpu devices are actually created. Fixes the following kasan findings: BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb40/0xee0 Read of size 8 at addr 0000000000000020 by task swapper/0/1 BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb36/0xee0 Read of size 8 at addr 0000000000000018 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G B Hardware name: IBM 3906 M04 704 (LPAR) Call Trace: ([<0000000143c6db7e>] show_stack+0x14e/0x1a8) [<0000000145956498>] dump_stack+0x1d0/0x218 [<000000014429fb4c>] print_address_description+0x64/0x380 [<000000014429f630>] __kasan_report+0x138/0x168 [<0000000145960b96>] kobject_uevent_env+0xb36/0xee0 [<0000000143c7c47c>] arch_update_cpu_topology+0x104/0x108 [<0000000143df9e22>] sched_init_domains+0x62/0xe8 [<000000014644c94a>] sched_init_smp+0x3a/0xc0 [<0000000146433a20>] kernel_init_freeable+0x558/0x958 [<000000014599002a>] kernel_init+0x22/0x160 [<00000001459a71d4>] ret_from_fork+0x28/0x30 [<00000001459a71dc>] kernel_thread_starter+0x0/0x10 Cc: stable@vger.kernel.org Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit ddfef75f877bf74271eb8f183d270989a0756b3b Author: Thomas Huth Date: Thu Aug 29 14:25:17 2019 +0200 KVM: s390: Test for bad access register and size at the start of S390_MEM_OP commit a13b03bbb4575b350b46090af4dfd30e735aaed1 upstream. If the KVM_S390_MEM_OP ioctl is called with an access register >= 16, then there is certainly a bug in the calling userspace application. We check for wrong access registers, but only if the vCPU was already in the access register mode before (i.e. the SIE block has recorded it). The check is also buried somewhere deep in the calling chain (in the function ar_translation()), so this is somewhat hard to find. It's better to always report an error to the userspace in case this field is set wrong, and it's safer in the KVM code if we block wrong values here early instead of relying on a check somewhere deep down the calling chain, so let's add another check to kvm_s390_guest_mem_op() directly. We also should check that the "size" is non-zero here (thanks to Janosch Frank for the hint!). If we do not check the size, we could call vmalloc() with this 0 value, and this will cause a kernel warning. Signed-off-by: Thomas Huth Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com Reviewed-by: Cornelia Huck Reviewed-by: Janosch Frank Reviewed-by: David Hildenbrand Cc: stable@vger.kernel.org Signed-off-by: Christian Borntraeger Signed-off-by: Greg Kroah-Hartman commit 8b41a30f91dbc4dfade46e4cc161cb49561f606f Author: Vasily Gorbik Date: Tue Aug 13 20:11:08 2019 +0200 s390/process: avoid potential reading of freed stack commit 8769f610fe6d473e5e8e221709c3ac402037da6c upstream. With THREAD_INFO_IN_TASK (which is selected on s390) task's stack usage is refcounted and should always be protected by get/put when touching other task's stack to avoid race conditions with task's destruction code. Fixes: d5c352cdd022 ("s390: move thread_info into task_struct") Cc: stable@vger.kernel.org # v4.10+ Acked-by: Ilya Leoshkevich Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman