commit de2cffe297563c815c840cfa14b77a0868b61e53 Author: Greg Kroah-Hartman Date: Thu Sep 12 11:02:56 2024 +0200 Linux 4.19.322 Link: https://lore.kernel.org/r/20240910092541.383432924@linuxfoundation.org Link: https://lore.kernel.org/r/20240910094253.246228054@linuxfoundation.org Tested-by: Harshit Mogalapalli Tested-by: Linux Kernel Functional Testing Tested-by: Shuah Khan Tested-by: Pavel Machek (CIP) Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman commit 324954a057b3ab21a7be5c91e148c15c401332f0 Author: Greg Kroah-Hartman Date: Wed Sep 11 15:01:37 2024 +0200 Revert "parisc: Use irq_enter_rcu() to fix warning at kernel/context_tracking.c:367" This reverts commit fea29d479eb470102cd025d9279503a2bfd28c60 which is commit 73cb4a2d8d7e0259f94046116727084f21e4599f upstream. It breaks the build on parisc systems, so revert it. Reported-by: Guenter Roeck Link: https://lore.kernel.org/r/092aa55c-0538-41e5-8ed0-d0a96b06f32e@roeck-us.net Reported-by: Helge Deller Link: https://lore.kernel.org/r/72b133a6-c221-4906-9184-30b4e6ee4260@gmx.de Signed-off-by: Greg Kroah-Hartman commit 15605b333ddaa3e5e21dfebb65546c70bb167925 Author: Li RongQing Date: Thu Jun 20 19:24:40 2019 +0800 netns: restore ops before calling ops_exit_list commit b272a0ad730103e84fb735fd0a8cc050cdf7f77c upstream. ops has been iterated to first element when call pre_exit, and it needs to restore from save_ops, not save ops to save_ops Fixes: d7d99872c144 ("netns: add pre_exit method to struct pernet_operations") Signed-off-by: Li RongQing Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e70c0b7e280415e1511fb258f4b72733d765b80e Author: Zhang Changzhong Date: Fri Nov 13 14:07:07 2020 +0800 cx82310_eth: fix error return code in cx82310_bind() commit cfbaa8b33e022aca62a3f2815ffbc02874d4cb8b upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: ca139d76b0d9 ("cx82310_eth: re-enable ethernet mode after router reboot") Reported-by: Hulk Robot Signed-off-by: Zhang Changzhong Link: https://lore.kernel.org/r/1605247627-15385-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit bc790261218952635f846aaf90bcc0974f6f62c6 Author: Daniel Borkmann Date: Thu Jul 4 08:41:57 2024 +0200 net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket commit 626dfed5fa3bfb41e0dffd796032b555b69f9cde upstream. When using a BPF program on kernel_connect(), the call can return -EPERM. This causes xs_tcp_setup_socket() to loop forever, filling up the syslog and causing the kernel to potentially freeze up. Neil suggested: This will propagate -EPERM up into other layers which might not be ready to handle it. It might be safer to map EPERM to an error we would be more likely to expect from the network system - such as ECONNREFUSED or ENETDOWN. ECONNREFUSED as error seems reasonable. For programs setting a different error can be out of reach (see handling in 4fbac77d2d09) in particular on kernels which do not have f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean"), thus given that it is better to simply remap for consistent behavior. UDP does handle EPERM in xs_udp_send_request(). Fixes: d74bad4e74ee ("bpf: Hooks for sys_connect") Fixes: 4fbac77d2d09 ("bpf: Hooks for sys_bind") Co-developed-by: Lex Siegel Signed-off-by: Lex Siegel Signed-off-by: Daniel Borkmann Cc: Neil Brown Cc: Trond Myklebust Cc: Anna Schumaker Link: https://github.com/cilium/cilium/issues/33395 Link: https://lore.kernel.org/bpf/171374175513.12877.8993642908082014881@noble.neil.brown.name Link: https://patch.msgid.link/9069ec1d59e4b2129fc23433349fd5580ad43921.1720075070.git.daniel@iogearbox.net Signed-off-by: Paolo Abeni Signed-off-by: Hugo SIMELIERE Signed-off-by: Greg Kroah-Hartman commit 432efdbe7da5ecfcbc0c2180cfdbab1441752a38 Author: Roland Xu Date: Thu Aug 15 10:58:13 2024 +0800 rtmutex: Drop rt_mutex::wait_lock before scheduling commit d33d26036a0274b472299d7dcdaa5fb34329f91b upstream. rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the good case it returns with the lock held and in the deadlock case it emits a warning and goes into an endless scheduling loop with the lock held, which triggers the 'scheduling in atomic' warning. Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning and dropping into the schedule for ever loop. [ tglx: Moved unlock before the WARN(), removed the pointless comment, massaged changelog, added Fixes tag ] Fixes: 3d5c9340d194 ("rtmutex: Handle deadlock detection smarter") Signed-off-by: Roland Xu Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/ME0P300MB063599BEF0743B8FA339C2CECC802@ME0P300MB0635.AUSP300.PROD.OUTLOOK.COM Signed-off-by: Greg Kroah-Hartman commit 76b1dda1598fc151610d3f372e24be1fcc8b396e Author: Andy Shevchenko Date: Thu Aug 29 18:58:38 2024 +0300 drm/i915/fence: Mark debug_fence_free() with __maybe_unused [ Upstream commit f99999536128b14b5d765a9982763b5134efdd79 ] When debug_fence_free() is unused (CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function] 118 | static inline void debug_fence_free(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~ Fix this by marking debug_fence_free() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects") Signed-off-by: Andy Shevchenko Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula (cherry picked from commit 8be4dce5ea6f2368cc25edc71989c4690fa66964) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin commit 60e02cb604a8e2c755a9f0407d63539b586d3310 Author: Andy Shevchenko Date: Thu Aug 29 18:58:37 2024 +0300 drm/i915/fence: Mark debug_fence_init_onstack() with __maybe_unused [ Upstream commit fcd9e8afd546f6ced378d078345a89bf346d065e ] When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n), it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: .../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function] 97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence) | ^~~~~~~~~~~~~~~~~~~~~~~~ Fix this by marking debug_fence_init_onstack() with __maybe_unused. See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build"). Fixes: 214707fc2ce0 ("drm/i915/selftests: Wrap a timer into a i915_sw_fence") Signed-off-by: Andy Shevchenko Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jani Nikula (cherry picked from commit 5bf472058ffb43baf6a4cdfe1d7f58c4c194c688) Signed-off-by: Joonas Lahtinen Signed-off-by: Sasha Levin commit 00259ae5206a713234e3ac12a8a0f731e86b754b Author: Jonathan Cameron Date: Wed May 29 14:34:32 2024 +0100 ACPI: processor: Fix memory leaks in error paths of processor_add() [ Upstream commit 47ec9b417ed9b6b8ec2a941cd84d9de62adc358a ] If acpi_processor_get_info() returned an error, pr and the associated pr->throttling.shared_cpu_map were leaked. The unwind code was in the wrong order wrt to setup, relying on some unwind actions having no affect (clearing variables that were never set etc). That makes it harder to reason about so reorder and add appropriate labels to only undo what was actually set up in the first place. Acked-by: Rafael J. Wysocki Reviewed-by: Gavin Shan Signed-off-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240529133446.28446-6-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin commit a30476afbaac69face9537cd8d0694d46d5d1ef5 Author: Jonathan Cameron Date: Wed May 29 14:34:31 2024 +0100 ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add() [ Upstream commit fadf231f0a06a6748a7fc4a2c29ac9ef7bca6bfd ] Rafael observed [1] that returning 0 from processor_add() will result in acpi_default_enumeration() being called which will attempt to create a platform device, but that makes little sense when the processor is known to be not available. So just return the error code from acpi_processor_get_info() instead. Link: https://lore.kernel.org/all/CAJZ5v0iKU8ra9jR+EmgxbuNm=Uwx2m1-8vn_RAZ+aCiUVLe3Pw@mail.gmail.com/ [1] Suggested-by: Rafael J. Wysocki Acked-by: Rafael J. Wysocki Reviewed-by: Gavin Shan Signed-off-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240529133446.28446-5-Jonathan.Cameron@huawei.com Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin commit 43d34110882b97ba1ec66cc8234b18983efb9abf Author: Eric Dumazet Date: Wed Sep 4 14:44:18 2024 +0000 ila: call nf_unregister_net_hooks() sooner commit 031ae72825cef43e4650140b800ad58bf7a6a466 upstream. syzbot found an use-after-free Read in ila_nf_input [1] Issue here is that ila_xlat_exit_net() frees the rhashtable, then call nf_unregister_net_hooks(). It should be done in the reverse way, with a synchronize_rcu(). This is a good match for a pre_exit() method. [1] BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline] BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline] BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16 CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 rht_key_hashfn include/linux/rhashtable.h:159 [inline] __rhashtable_lookup include/linux/rhashtable.h:604 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672 ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline] ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline] ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 run_ksoftirqd+0xca/0x130 kernel/softirq.c:928 smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620 flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff) page_type: 0xbfffffff(buddy) raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000 raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as freed page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187 set_page_owner include/linux/page_owner.h:32 [inline] post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493 prep_new_page mm/page_alloc.c:1501 [inline] get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439 __alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695 __alloc_pages_node_noprof include/linux/gfp.h:269 [inline] alloc_pages_node_noprof include/linux/gfp.h:296 [inline] ___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103 __kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130 __do_kmalloc_node mm/slub.c:4146 [inline] __kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164 __kvmalloc_node_noprof+0x72/0x190 mm/util.c:650 bucket_table_alloc lib/rhashtable.c:186 [inline] rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071 ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613 ops_init+0x359/0x610 net/core/net_namespace.c:139 setup_net+0x515/0xca0 net/core/net_namespace.c:343 copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x619/0xc10 kernel/fork.c:3328 __do_sys_unshare kernel/fork.c:3399 [inline] __se_sys_unshare kernel/fork.c:3397 [inline] __x64_sys_unshare+0x38/0x40 kernel/fork.c:3397 page last free pid 11846 tgid 11846 stack trace: reset_page_owner include/linux/page_owner.h:25 [inline] free_pages_prepare mm/page_alloc.c:1094 [inline] free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612 __folio_put+0x2c8/0x440 mm/swap.c:128 folio_put include/linux/mm.h:1486 [inline] free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565 kfree+0x1c4/0x360 mm/slub.c:4588 rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169 ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626 ops_exit_list net/core/net_namespace.c:173 [inline] cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd40 kernel/workqueue.c:3390 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Memory state around the buggy address: ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Tom Herbert Reviewed-by: Florian Westphal Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit bc596c2026c7f52dc12a784403ccfc3b152844e6 Author: Eric Dumazet Date: Tue Jun 18 11:08:59 2019 -0700 netns: add pre_exit method to struct pernet_operations commit d7d99872c144a2c2f5d9c9d83627fa833836cba5 upstream. Current struct pernet_operations exit() handlers are highly discouraged to call synchronize_rcu(). There are cases where we need them, and exit_batch() does not help the common case where a single netns is dismantled. This patch leverages the existing synchronize_rcu() call in cleanup_net() Calling optional ->pre_exit() method before ->exit() or ->exit_batch() allows to benefit from a single synchronize_rcu() call. Note that the synchronize_rcu() calls added in this patch are only in error paths or slow paths. Tested: $ time for i in {1..1000}; do unshare -n /bin/false;done real 0m2.612s user 0m0.171s sys 0m2.216s Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b90beafac05931cbfcb6b1bd4f67c1923f47040e Author: Ryusuke Konishi Date: Sun Aug 11 19:03:20 2024 +0900 nilfs2: protect references to superblock parameters exposed in sysfs [ Upstream commit 683408258917541bdb294cd717c210a04381931e ] The superblock buffers of nilfs2 can not only be overwritten at runtime for modifications/repairs, but they are also regularly swapped, replaced during resizing, and even abandoned when degrading to one side due to backing device issues. So, accessing them requires mutual exclusion using the reader/writer semaphore "nilfs->ns_sem". Some sysfs attribute show methods read this superblock buffer without the necessary mutual exclusion, which can cause problems with pointer dereferencing and memory access, so fix it. Link: https://lkml.kernel.org/r/20240811100320.9913-1-konishi.ryusuke@gmail.com Fixes: da7141fb78db ("nilfs2: add /sys/fs/nilfs2/ group") Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 51af9b589ab68a94485ee55811d1243c6bf665b4 Author: Qing Wang Date: Mon Nov 8 18:34:58 2021 -0800 nilfs2: replace snprintf in show functions with sysfs_emit [ Upstream commit 3bcd6c5bd483287f4a09d3d59a012d47677b6edc ] Patch series "nilfs2 updates". This patch (of 2): coccicheck complains about the use of snprintf() in sysfs show functions. Fix the coccicheck warning: WARNING: use scnprintf or sprintf. Use sysfs_emit instead of scnprintf or sprintf makes more sense. Link: https://lkml.kernel.org/r/1635151862-11547-1-git-send-email-konishi.ryusuke@gmail.com Link: https://lkml.kernel.org/r/1634095759-4625-1-git-send-email-wangqing@vivo.com Link: https://lkml.kernel.org/r/1635151862-11547-2-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Qing Wang Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 683408258917 ("nilfs2: protect references to superblock parameters exposed in sysfs") Signed-off-by: Sasha Levin commit 84bd537aaefb210218b5e1d982411fa6ae8429a1 Author: Zheng Yejian Date: Tue Aug 27 20:46:54 2024 +0800 tracing: Avoid possible softlockup in tracing_iter_reset() [ Upstream commit 49aa8a1f4d6800721c7971ed383078257f12e8f9 ] In __tracing_open(), when max latency tracers took place on the cpu, the time start of its buffer would be updated, then event entries with timestamps being earlier than start of the buffer would be skipped (see tracing_iter_reset()). Softlockup will occur if the kernel is non-preemptible and too many entries were skipped in the loop that reset every cpu buffer, so add cond_resched() to avoid it. Cc: stable@vger.kernel.org Fixes: 2f26ebd549b9a ("tracing: use timestamp to determine start of latency traces") Link: https://lore.kernel.org/20240827124654.3817443-1-zhengyejian@huaweicloud.com Suggested-by: Steven Rostedt Signed-off-by: Zheng Yejian Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit ac8ffa21dde0c1edcd9dd98b5555a0aa4eea3b1f Author: Steven Rostedt (VMware) Date: Tue Mar 17 17:32:25 2020 -0400 ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance() [ Upstream commit bc1a72afdc4a91844928831cac85731566e03bc6 ] When the ring buffer was first created, the iterator followed the normal producer/consumer operations where it had both a peek() operation, that just returned the event at the current location, and a read(), that would return the event at the current location and also increment the iterator such that the next peek() or read() will return the next event. The only use of the ring_buffer_read() is currently to move the iterator to the next location and nothing now actually reads the event it returns. Rename this function to its actual use case to ring_buffer_iter_advance(), which also adds the "iter" part to the name, which is more meaningful. As the timestamp returned by ring_buffer_read() was never used, there's no reason that this new version should bother having returning it. It will also become a void function. Link: http://lkml.kernel.org/r/20200317213416.018928618@goodmis.org Signed-off-by: Steven Rostedt (VMware) Stable-dep-of: 49aa8a1f4d68 ("tracing: Avoid possible softlockup in tracing_iter_reset()") Signed-off-by: Sasha Levin commit 32bb3588ccf08406931c7f061f0ef7a37cd38414 Author: Sven Schnelle Date: Tue Sep 3 12:23:12 2024 +0200 uprobes: Use kzalloc to allocate xol area commit e240b0fde52f33670d1336697c22d90a4fe33c84 upstream. To prevent unitialized members, use kzalloc to allocate the xol area. Fixes: b059a453b1cf1 ("x86/vdso: Add mremap hook to vm_special_mapping") Signed-off-by: Sven Schnelle Signed-off-by: Peter Zijlstra (Intel) Acked-by: Oleg Nesterov Link: https://lore.kernel.org/r/20240903102313.3402529-1-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman commit 143674856ebffeb785759892b1a11a7f5ecbd1f5 Author: Jacky Bai Date: Thu Jul 25 15:33:55 2024 -0400 clocksource/drivers/imx-tpm: Fix next event not taking effect sometime commit 3d5c2f8e75a55cfb11a85086c71996af0354a1fb upstream. The value written into the TPM CnV can only be updated into the hardware when the counter increases. Additional writes to the CnV write buffer are ignored until the register has been updated. Therefore, we need to check if the CnV has been updated before continuing. This may require waiting for 1 counter cycle in the worst case. Cc: stable@vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai Reviewed-by: Peng Fan Reviewed-by: Ye Li Reviewed-by: Jason Liu Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano Signed-off-by: Greg Kroah-Hartman commit eeec87f317abb8b1ebb04b5d6823e941649d8293 Author: Jacky Bai Date: Thu Jul 25 15:33:54 2024 -0400 clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX commit 5b8843fcd49827813da80c0f590a17ae4ce93c5d upstream. In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta is larger than INT_MAX. For example: tpm_set_next_event(delta = 0xffff_fffe) { ... next = tpm_read_counter(); // assume next is 0x10 next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e now = tpm_read_counter(); // now is 0x10 ... return (int)(next - now) <= 0 ? -ETIME : 0; ^^^^^^^^^^ 0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when cast to int. So return -ETIME. } To fix this, introduce a 'prev' variable and check if 'now - prev' is larger than delta. Cc: stable@vger.kernel.org Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Jacky Bai Reviewed-by: Peng Fan Reviewed-by: Ye Li Reviewed-by: Jason Liu Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com Signed-off-by: Daniel Lezcano Signed-off-by: Greg Kroah-Hartman commit f6365931bf7c07b2b397dbb06a4f6573cc9fae73 Author: David Fernandez Gonzalez Date: Wed Aug 28 15:43:37 2024 +0000 VMCI: Fix use-after-free when removing resource in vmci_resource_remove() commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream. When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). Fixes: bc63dedb7d46 ("VMCI: resource object implementation.") Cc: stable@vger.kernel.org Reported-by: George Kennedy Signed-off-by: David Fernandez Gonzalez Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com Signed-off-by: Greg Kroah-Hartman commit 45ab92b650f4ec42528b8c199b0a3ae04a71ea8b Author: Naman Jain Date: Thu Aug 29 12:43:12 2024 +0530 Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic commit 6fd28941447bf2c8ca0f26fda612a1cabc41663f upstream. Rescind offer handling relies on rescind callbacks for some of the resources cleanup, if they are registered. It does not unregister vmbus device for the primary channel closure, when callback is registered. Without it, next onoffer does not come, rescind flag remains set and device goes to unusable state. Add logic to unregister vmbus for the primary channel in rescind callback to ensure channel removal and relid release, and to ensure that next onoffer can be received and handled properly. Cc: stable@vger.kernel.org Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support") Signed-off-by: Naman Jain Reviewed-by: Saurabh Sengar Link: https://lore.kernel.org/r/20240829071312.1595-3-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman commit 3d414b64ecf6fd717d7510ffb893c6f23acbf50e Author: Saurabh Sengar Date: Thu Aug 29 12:43:11 2024 +0530 uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind commit fb1adbd7e50f3d2de56d0a2bb0700e2e819a329e upstream. For primary VM Bus channels, primary_channel pointer is always NULL. This pointer is valid only for the secondary channels. Also, rescind callback is meant for primary channels only. Fix NULL pointer dereference by retrieving the device_obj from the parent for the primary channel. Cc: stable@vger.kernel.org Fixes: ca3cda6fcf1e ("uio_hv_generic: add rescind support") Signed-off-by: Saurabh Sengar Signed-off-by: Naman Jain Link: https://lore.kernel.org/r/20240829071312.1595-2-namjain@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman commit 5e0a746e798cd962e478b54f50f6f39384f735bc Author: Geert Uytterhoeven Date: Mon Sep 2 15:25:09 2024 +0100 nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc commit c69f37f6559a8948d70badd2b179db7714dedd62 upstream. devm_nvmem_device_get() returns an nvmem device, not an nvmem cell. Fixes: e2a5402ec7c6d044 ("nvmem: Add nvmem_device based consumer apis.") Cc: stable Signed-off-by: Geert Uytterhoeven Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20240902142510.71096-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman commit a1cad4f0340c50037bd3211bd43deff662d5287e Author: Matteo Martelli Date: Tue Jul 30 10:11:53 2024 +0200 iio: fix scale application in iio_convert_raw_to_processed_unlocked commit 8a3dcc970dc57b358c8db2702447bf0af4e0d83a upstream. When the scale_type is IIO_VAL_INT_PLUS_MICRO or IIO_VAL_INT_PLUS_NANO the scale passed as argument is only applied to the fractional part of the value. Fix it by also multiplying the integer part by the scale provided. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Matteo Martelli Link: https://patch.msgid.link/20240730-iio-fix-scale-v1-1-6246638c8daa@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 0edd1eac01afe0c2104bddd7d1cae985b0a4552c Author: David Lechner Date: Tue Jul 23 11:32:21 2024 -0500 iio: buffer-dmaengine: fix releasing dma channel on error commit 84c65d8008764a8fb4e627ff02de01ec4245f2c4 upstream. If dma_get_slave_caps() fails, we need to release the dma channel before returning an error to avoid leaking the channel. Fixes: 2d6ca60f3284 ("iio: Add a DMAengine framework based buffer") Signed-off-by: David Lechner Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit cff08d637389f4bf4a49a08ff0474bd6c2b27b97 Author: Michael Ellerman Date: Tue Aug 20 13:04:07 2024 +1000 ata: pata_macio: Use WARN instead of BUG [ Upstream commit d4bc0a264fb482b019c84fbc7202dd3cab059087 ] The overflow/underflow conditions in pata_macio_qc_prep() should never happen. But if they do there's no need to kill the system entirely, a WARN and failing the IO request should be sufficient and might allow the system to keep running. Signed-off-by: Michael Ellerman Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit d2a79494d8a5262949736fb2c3ac44d20a51b0d8 Author: Stefan Wiehler Date: Mon Aug 12 12:06:51 2024 +0200 of/irq: Prevent device address out-of-bounds read in interrupt map walk [ Upstream commit b739dffa5d570b411d4bdf4bb9b8dfd6b7d72305 ] When of_irq_parse_raw() is invoked with a device address smaller than the interrupt parent node (from #address-cells property), KASAN detects the following out-of-bounds read when populating the initial match table (dyndbg="func of_irq_parse_* +p"): OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0 OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2 OF: intspec=4 OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2 OF: -> addrsize=3 ================================================================== BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0 Read of size 4 at addr ffffff81beca5608 by task bash/764 CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1 Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023 Call trace: dump_backtrace+0xdc/0x130 show_stack+0x1c/0x30 dump_stack_lvl+0x6c/0x84 print_report+0x150/0x448 kasan_report+0x98/0x140 __asan_load4+0x78/0xa0 of_irq_parse_raw+0x2b8/0x8d0 of_irq_parse_one+0x24c/0x270 parse_interrupts+0xc0/0x120 of_fwnode_add_links+0x100/0x2d0 fw_devlink_parse_fwtree+0x64/0xc0 device_add+0xb38/0xc30 of_device_add+0x64/0x90 of_platform_device_create_pdata+0xd0/0x170 of_platform_bus_create+0x244/0x600 of_platform_notify+0x1b0/0x254 blocking_notifier_call_chain+0x9c/0xd0 __of_changeset_entry_notify+0x1b8/0x230 __of_changeset_apply_notify+0x54/0xe4 of_overlay_fdt_apply+0xc04/0xd94 ... The buggy address belongs to the object at ffffff81beca5600 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 8 bytes inside of 128-byte region [ffffff81beca5600, ffffff81beca5680) The buggy address belongs to the physical page: page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4 head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300 raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc ================================================================== OF: -> got it ! Prevent the out-of-bounds read by copying the device address into a buffer of sufficient size. Signed-off-by: Stefan Wiehler Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com Signed-off-by: Rob Herring (Arm) Signed-off-by: Sasha Levin commit f82cb7f24032ed023fc67d26ea9bf322d8431a90 Author: Phillip Lougher Date: Mon Aug 12 00:28:21 2024 +0100 Squashfs: sanity check symbolic link size [ Upstream commit 810ee43d9cd245d138a2733d87a24858a23f577d ] Syzkiller reports a "KMSAN: uninit-value in pick_link" bug. This is caused by an uninitialised page, which is ultimately caused by a corrupted symbolic link size read from disk. The reason why the corrupted symlink size causes an uninitialised page is due to the following sequence of events: 1. squashfs_read_inode() is called to read the symbolic link from disk. This assigns the corrupted value 3875536935 to inode->i_size. 2. Later squashfs_symlink_read_folio() is called, which assigns this corrupted value to the length variable, which being a signed int, overflows producing a negative number. 3. The following loop that fills in the page contents checks that the copied bytes is less than length, which being negative means the loop is skipped, producing an uninitialised page. This patch adds a sanity check which checks that the symbolic link size is not larger than expected. -- Signed-off-by: Phillip Lougher Link: https://lore.kernel.org/r/20240811232821.13903-1-phillip@squashfs.org.uk Reported-by: Lizhi Xu Reported-by: syzbot+24ac24ff58dc5b0d26b9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/ V2: fix spelling mistake. Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit 487f140d366f9b12edb11b97819c135676090bd2 Author: Oliver Neukum Date: Tue Aug 6 19:28:05 2024 +0200 usbnet: ipheth: race between ipheth_close and error handling [ Upstream commit e5876b088ba03a62124266fa20d00e65533c7269 ] ipheth_sndbulk_callback() can submit carrier_work as a part of its error handling. That means that the driver must make sure that the work is cancelled after it has made sure that no more URB can terminate with an error condition. Hence the order of actions in ipheth_close() needs to be inverted. Signed-off-by: Oliver Neukum Signed-off-by: Foster Snowhill Tested-by: Georgi Valkov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9c6d189f0c1c59ba9a32326ec82a0b367a3cd47b Author: Dmitry Torokhov Date: Sun Aug 4 17:50:25 2024 -0700 Input: uinput - reject requests with unreasonable number of slots [ Upstream commit 206f533a0a7c683982af473079c4111f4a0f9f5e ] From: Dmitry Torokhov When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts. Reported-by: Tetsuo Handa Reported-by: syzbot Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5 Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin commit e239e44dcd419b13cf840e2a3a833204e4329714 Author: Camila Alvarez Date: Tue Jul 30 19:42:43 2024 -0400 HID: cougar: fix slab-out-of-bounds Read in cougar_report_fixup [ Upstream commit a6e9c391d45b5865b61e569146304cff72821a5d ] report_fixup for the Cougar 500k Gaming Keyboard was not verifying that the report descriptor size was correct before accessing it Reported-by: syzbot+24c0361074799d02c452@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=24c0361074799d02c452 Signed-off-by: Camila Alvarez Reviewed-by: Silvan Jegen Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin commit d09f1bf3d7f029558704f077097dbcd4dc5db8da Author: David Sterba Date: Mon Jul 29 21:59:24 2024 +0200 btrfs: initialize location to fix -Wmaybe-uninitialized in btrfs_lookup_dentry() [ Upstream commit b8e947e9f64cac9df85a07672b658df5b2bcff07 ] Some arch + compiler combinations report a potentially unused variable location in btrfs_lookup_dentry(). This is a false alert as the variable is passed by value and always valid or there's an error. The compilers cannot probably reason about that although btrfs_inode_by_name() is in the same file. > + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9 > + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used +uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5 m68k-gcc8/m68k-allmodconfig mips-gcc8/mips-allmodconfig powerpc-gcc5/powerpc-all{mod,yes}config powerpc-gcc5/ppc64_defconfig Initialize it to zero, this should fix the warnings and won't change the behaviour as btrfs_inode_by_name() accepts only a root or inode item types, otherwise returns an error. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/ Reviewed-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 0790b89c7e911003b8c50ae50e3ac7645de1fae9 Author: Dan Williams Date: Thu May 30 18:04:35 2024 -0700 PCI: Add missing bridge lock to pci_bus_lock() [ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ] One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com Reported-by: Imre Deak Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch Signed-off-by: Dan Williams Signed-off-by: Keith Busch [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] Signed-off-by: Bjorn Helgaas Tested-by: Hans de Goede Tested-by: Kalle Valo Reviewed-by: Dave Jiang Signed-off-by: Sasha Levin commit c847b28a799733b04574060ab9d00f215970627d Author: Josef Bacik Date: Tue May 7 14:12:13 2024 -0400 btrfs: clean up our handling of refs == 0 in snapshot delete [ Upstream commit b8ccef048354074a548f108e51d0557d6adfd3a3 ] In reada we BUG_ON(refs == 0), which could be unkind since we aren't holding a lock on the extent leaf and thus could get a transient incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which could happen if we have extent tree corruption. Change that to return -EUCLEAN. In do_walk_down() we catch this case and handle it correctly, however we return -EIO, which -EUCLEAN is a more appropriate error code. Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert that to proper error handling. Also adjust the error message so we can actually do something with the information. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 2df0e48615f438cdf93f1469ed9f289f71440d2d Author: Josef Bacik Date: Tue May 7 14:12:12 2024 -0400 btrfs: replace BUG_ON with ASSERT in walk_down_proc() [ Upstream commit 1f9d44c0a12730a24f8bb75c5e1102207413cc9b ] We have a couple of areas where we check to make sure the tree block is locked before looking up or messing with references. This is old code so it has this as BUG_ON(). Convert this to ASSERT() for developers. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 2d6a7a1ee3862d129c0e0fbd3cc147e185a379dc Author: Zqiang Date: Thu Jul 4 14:52:13 2024 +0800 smp: Add missing destroy_work_on_stack() call in smp_call_on_cpu() [ Upstream commit 77aeb1b685f9db73d276bad4bb30d48505a6fd23 ] For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for the debug check in __init_work() to work correctly. But this lacks the counterpart to remove the tracked object from debug objects again, which will cause a debug object warning once the stack is freed. Add the missing destroy_work_on_stack() invocation to cure that. [ tglx: Massaged changelog ] Signed-off-by: Zqiang Signed-off-by: Thomas Gleixner Tested-by: Paul E. McKenney Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com Signed-off-by: Sasha Levin commit a12cf97cbefa139ef8d95081f2ea047cbbd74b7a Author: Sascha Hauer Date: Wed Jul 3 09:24:09 2024 +0200 wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id() [ Upstream commit c145eea2f75ff7949392aebecf7ef0a81c1f6c14 ] mwifiex_get_priv_by_id() returns the priv pointer corresponding to the bss_num and bss_type, but without checking if the priv is actually currently in use. Unused priv pointers do not have a wiphy attached to them which can lead to NULL pointer dereferences further down the callstack. Fix this by returning only used priv pointers which have priv->bss_mode set to something else than NL80211_IFTYPE_UNSPECIFIED. Said NULL pointer dereference happened when an Accesspoint was started with wpa_supplicant -i mlan0 with this config: network={ ssid="somessid" mode=2 frequency=2412 key_mgmt=WPA-PSK WPA-PSK-SHA256 proto=RSN group=CCMP pairwise=CCMP psk="12345678" } When waiting for the AP to be established, interrupting wpa_supplicant with and starting it again this happens: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 | CM = 0, WnR = 0, TnD = 0, TagAccess = 0 | GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000 | [0000000000000140] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP | Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio +mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs +imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6 | CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18 | Hardware name: somemachine (DT) | Workqueue: events sdio_irq_work | pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex] | lr : mwifiex_get_cfp+0x34/0x15c [mwifiex] | sp : ffff8000818b3a70 | x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004 | x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9 | x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000 | x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000 | x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517 | x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1 | x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157 | x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124 | x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000 | Call trace: | mwifiex_get_cfp+0xd8/0x15c [mwifiex] | mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex] | mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex] | mwifiex_process_sta_event+0x298/0xf0c [mwifiex] | mwifiex_process_event+0x110/0x238 [mwifiex] | mwifiex_main_process+0x428/0xa44 [mwifiex] | mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio] | process_sdio_pending_irqs+0x64/0x1b8 | sdio_irq_work+0x4c/0x7c | process_one_work+0x148/0x2a0 | worker_thread+0x2fc/0x40c | kthread+0x110/0x114 | ret_from_fork+0x10/0x20 | Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000) | ---[ end trace 0000000000000000 ]--- Signed-off-by: Sascha Hauer Acked-by: Brian Norris Reviewed-by: Francesco Dolcini Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240703072409.556618-1-s.hauer@pengutronix.de Signed-off-by: Sasha Levin commit 93cf73a7bfdce683bde3a7bb65f270d3bd24497b Author: Guenter Roeck Date: Sat Jul 6 23:51:34 2024 -0700 hwmon: (w83627ehf) Fix underflows seen when writing limit attributes [ Upstream commit 5c1de37969b7bc0abcb20b86e91e70caebbd4f89 ] DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 298a55f11edd811f2189b74eb8f53dee34d4f14c Author: Guenter Roeck Date: Sat Jul 6 23:50:08 2024 -0700 hwmon: (nct6775-core) Fix underflows seen when writing limit attributes [ Upstream commit 0403e10bf0824bf0ec2bb135d4cf1c0cc3bf4bf0 ] DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 93f0f5721d0cca45dac50af1ae6f9a9826c699fd Author: Guenter Roeck Date: Sat Jul 6 23:48:42 2024 -0700 hwmon: (lm95234) Fix underflows seen when writing limit attributes [ Upstream commit af64e3e1537896337405f880c1e9ac1f8c0c6198 ] DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 05419d0056dcf7088687e561bb583cc06deba777 Author: Guenter Roeck Date: Sat Jul 6 23:43:04 2024 -0700 hwmon: (adc128d818) Fix underflows seen when writing limit attributes [ Upstream commit 8cad724c8537fe3e0da8004646abc00290adae40 ] DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large negative number such as -9223372036854775808 is provided by the user. Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations. Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 4eb4085c1346d19d4a05c55246eb93e74e671048 Author: Krishna Kumar Date: Mon Jul 1 13:15:06 2024 +0530 pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv [ Upstream commit 335e35b748527f0c06ded9eebb65387f60647fda ] The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel crash when we try to hot-unplug/disable the PCIe switch/bridge from the PHB. The crash occurs because although the MSI data structure has been released during disable/hot-unplug path and it has been assigned with NULL, still during unregistration the code was again trying to explicitly disable the MSI which causes the NULL pointer dereference and kernel crash. The patch fixes the check during unregistration path to prevent invoking pci_disable_msi/msix() since its data structure is already freed. Reported-by: Timothy Pearson Closes: https://lore.kernel.org/all/1981605666.2142272.1703742465927.JavaMail.zimbra@raptorengineeringinc.com/ Acked-by: Bjorn Helgaas Tested-by: Shawn Anastasio Signed-off-by: Krishna Kumar Signed-off-by: Michael Ellerman Link: https://msgid.link/20240701074513.94873-2-krishnak@linux.ibm.com Signed-off-by: Sasha Levin commit c57834f37dc73410ed2eb11e1cc3fecad169b065 Author: Zijun Hu Date: Tue Jul 2 22:51:52 2024 +0800 devres: Initialize an uninitialized struct member [ Upstream commit 56a20ad349b5c51909cf8810f7c79b288864ad33 ] Initialize an uninitialized struct member for driver API devres_open_group(). Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/1719931914-19035-4-git-send-email-quic_zijuhu@quicinc.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 3bedb7ce080690d0d6172db790790c1219bcbdd5 Author: Johannes Berg Date: Wed Jul 3 17:22:36 2024 +0200 um: line: always fill *error_out in setup_one_line() [ Upstream commit 824ac4a5edd3f7494ab1996826c4f47f8ef0f63d ] The pointer isn't initialized by callers, but I have encountered cases where it's still printed; initialize it in all possible cases in setup_one_line(). Link: https://patch.msgid.link/20240703172235.ad863568b55f.Iaa1eba4db8265d7715ba71d5f6bb8c7ff63d27e9@changeid Acked-By: Anton Ivanov Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 6760357063f593a17613e015aed2051cfd4197c6 Author: Waiman Long Date: Wed Jul 3 14:52:29 2024 -0400 cgroup: Protect css->cgroup write under css_set_lock [ Upstream commit 57b56d16800e8961278ecff0dc755d46c4575092 ] The writing of css->cgroup associated with the cgroup root in rebind_subsystems() is currently protected only by cgroup_mutex. However, the reading of css->cgroup in both proc_cpuset_show() and proc_cgroup_show() is protected just by css_set_lock. That makes the readers susceptible to racing problems like data tearing or caching. It is also a problem that can be reported by KCSAN. This can be fixed by using READ_ONCE() and WRITE_ONCE() to access css->cgroup. Alternatively, the writing of css->cgroup can be moved under css_set_lock as well which is done by this patch. Signed-off-by: Waiman Long Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin commit 75a34515eb1be431819ec00cd09fe3a3eb369cdb Author: Jacob Pan Date: Tue Jul 2 21:08:33 2024 +0800 iommu/vt-d: Handle volatile descriptor status read [ Upstream commit b5e86a95541cea737394a1da967df4cd4d8f7182 ] Queued invalidation wait descriptor status is volatile in that IOMMU hardware writes the data upon completion. Use READ_ONCE() to prevent compiler optimizations which ensures memory reads every time. As a side effect, READ_ONCE() also enforces strict types and may add an extra instruction. But it should not have negative performance impact since we use cpu_relax anyway and the extra time(by adding an instruction) may allow IOMMU HW request cacheline ownership easier. e.g. gcc 12.3 BEFORE: 81 38 ad de 00 00 cmpl $0x2,(%rax) AFTER (with READ_ONCE()) 772f: 8b 00 mov (%rax),%eax 7731: 3d ad de 00 00 cmp $0x2,%eax //status data is 32 bit Signed-off-by: Jacob Pan Reviewed-by: Kevin Tian Reviewed-by: Yi Liu Link: https://lore.kernel.org/r/20240607173817.3914600-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20240702130839.108139-2-baolu.lu@linux.intel.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit 4c709ad8feaff418ded4561c6a87bcf4078f4a03 Author: Pawel Dembicki Date: Tue Sep 3 22:33:41 2024 +0200 net: dsa: vsc73xx: fix possible subblocks range of CAPT block [ Upstream commit 8e69c96df771ab469cec278edb47009351de4da6 ] CAPT block (CPU Capture Buffer) have 7 sublocks: 0-3, 4, 6, 7. Function 'vsc73xx_is_addr_valid' allows to use only block 0 at this moment. This patch fix it. Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Pawel Dembicki Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20240903203340.1518789-1-paweldembicki@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 7d9933cb9990b8300075a853f5b2a5d3e4349629 Author: Jonas Gorski Date: Tue Sep 3 10:19:57 2024 +0200 net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN [ Upstream commit bee2ef946d3184e99077be526567d791c473036f ] When userspace wants to take over a fdb entry by setting it as EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add(). If the bridge updates the entry later because its port changed, we clear the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER flag set. If userspace then wants to take over the entry again, br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the update. Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless if this was a user fdb entry or not. Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such") Signed-off-by: Jonas Gorski Acked-by: Nikolay Aleksandrov Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d3bc290bdd518e056f5cfe82accb93d5ad8643c2 Author: Nikolay Aleksandrov Date: Tue Oct 29 13:45:57 2019 +0200 net: bridge: fdb: convert added_by_external_learn to use bitops [ Upstream commit b5cd9f7c42480ede119a390607a9dbe6263f6795 ] Convert the added_by_external_learn field to a flag and use bitops. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit 4b1bf0ea37f0a21fa948e364c623676730657795 Author: Nikolay Aleksandrov Date: Tue Oct 29 13:45:56 2019 +0200 net: bridge: fdb: convert added_by_user to bitops [ Upstream commit ac3ca6af443aa495c7907e5010ac77fbd2450eaa ] Straight-forward convert of the added_by_user field to bitops. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit f210d06825042341c7de635898115cb5e840023e Author: Nikolay Aleksandrov Date: Tue Oct 29 13:45:55 2019 +0200 net: bridge: fdb: convert is_sticky to bitops [ Upstream commit e0458d9a733ba71a2821d0c3fc0745baac697db0 ] Straight-forward convert of the is_sticky field to bitops. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit 806d9b874077deb1b8a8c1cc1a600576603f03bb Author: Nikolay Aleksandrov Date: Tue Oct 29 13:45:54 2019 +0200 net: bridge: fdb: convert is_static to bitops [ Upstream commit 29e63fffd666f1945756882d4b02bc7bec132101 ] Convert the is_static to bitops, make use of the combined test_and_set/clear_bit to simplify expressions in fdb_add_entry. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit 9969873b374eac5b5ddd2948fbac886b50d850a8 Author: Nikolay Aleksandrov Date: Tue Oct 29 13:45:53 2019 +0200 net: bridge: fdb: convert is_local to bitops [ Upstream commit 6869c3b02b596eba931a754f56875d2e2ac612db ] The patch adds a new fdb flags field in the hole between the two cache lines and uses it to convert is_local to bitops. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit 76c1d0d1cbedf122ed90cb64a05c440eedd39664 Author: Ido Schimmel Date: Wed Oct 17 08:53:29 2018 +0000 bridge: switchdev: Allow clearing FDB entry offload indication [ Upstream commit e9ba0fbc7dd23a74e77960c98c988f59a1ff75aa ] Currently, an FDB entry only ceases being offloaded when it is deleted. This changes with VxLAN encapsulation. Devices capable of performing VxLAN encapsulation usually have only one FDB table, unlike the software data path which has two - one in the bridge driver and another in the VxLAN driver. Therefore, bridge FDB entries pointing to a VxLAN device are only offloaded if there is a corresponding entry in the VxLAN FDB. Allow clearing the offload indication in case the corresponding entry was deleted from the VxLAN FDB. Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit c5a0142c4d33b5948879cd5ec0af50eb92109465 Author: Nikolay Aleksandrov Date: Tue Sep 11 09:39:53 2018 +0300 net: bridge: add support for sticky fdb entries [ Upstream commit 435f2e7cc0b783615d7fbcf08f5f00d289f9caeb ] Add support for entries which are "sticky", i.e. will not change their port if they show up from a different one. A new ndm flag is introduced for that purpose - NTF_STICKY. We allow to set it only to non-local entries. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit 2579dc71bfa05f908c13decb27989c18be775e2d Author: Richard Guy Briggs Date: Mon Jul 23 15:41:38 2018 -0400 rfkill: fix spelling mistake contidion to condition [ Upstream commit f404c3ecc401b3617c454c06a3d36a43a01f1aaf ] This came about while trying to determine if there would be any pattern match on contid, a new audit container identifier internal variable. This was the only one. Signed-off-by: Richard Guy Briggs Signed-off-by: Johannes Berg Stable-dep-of: bee2ef946d31 ("net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN") Signed-off-by: Sasha Levin commit c9c76962b49ff37ed8dcf880eabeb74df3e0686e Author: Oliver Neukum Date: Thu Aug 29 19:50:55 2024 +0200 usbnet: modern method to get random MAC [ Upstream commit bab8eb0dd4cb995caa4a0529d5655531c2ec5e8e ] The driver generates a random MAC once on load and uses it over and over, including on two devices needing a random MAC at the same time. Jakub suggested revamping the driver to the modern API for setting a random MAC rather than fixing the old stuff. The bug is as old as the driver. Signed-off-by: Oliver Neukum Reviewed-by: Simon Horman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 40373e2bdf967ba982309ff06e3b8c7c79c4de0e Author: Jakub Kicinski Date: Thu Oct 21 06:12:06 2021 -0700 net: usb: don't write directly to netdev->dev_addr [ Upstream commit 2674e7ea22ba0e22a2d1603bd51e0b8f6442a267 ] Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Manually fix all net/usb drivers without separate maintainers. v2: catc does DMA to the buffer, leave the conversion to Oliver Signed-off-by: Jakub Kicinski Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC") Signed-off-by: Sasha Levin commit 3f255eda1818c6f2b4fb446c488339c66173dc6d Author: Len Baker Date: Sun Aug 1 19:12:26 2021 +0200 drivers/net/usb: Remove all strcpy() uses [ Upstream commit 493c3ca6bd754d8587604496eb814f72e933075d ] strcpy() performs no bounds checking on the destination buffer. This could result in linear overflows beyond the end of the buffer, leading to all kinds of misbehaviors. The safe replacement is strscpy(). Signed-off-by: Len Baker Signed-off-by: David S. Miller Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC") Signed-off-by: Sasha Levin commit 5adf7fbdfa3e9e425b04771e1d64c4e184ad8fdb Author: Ondrej Zary Date: Sat Oct 10 16:00:46 2020 +0200 cx82310_eth: re-enable ethernet mode after router reboot [ Upstream commit ca139d76b0d9e59d18f2d2ec8f0d81b82acd6808 ] When the router is rebooted without a power cycle, the USB device remains connected but its configuration is reset. This results in a non-working ethernet connection with messages like this in syslog: usb 2-2: RX packet too long: 65535 B Re-enable ethernet mode when receiving a packet with invalid size of 0xffff. Signed-off-by: Ondrej Zary Signed-off-by: Jakub Kicinski Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC") Signed-off-by: Sasha Levin commit 5f3806adb62e1360a561cbac0c15f9310740608b Author: Aleksandr Mishin Date: Fri Aug 30 09:54:28 2024 +0300 platform/x86: dell-smbios: Fix error path in dell_smbios_init() [ Upstream commit ffc17e1479e8e9459b7afa80e5d9d40d0dd78abb ] In case of error in build_tokens_sysfs(), all the memory that has been allocated is freed at end of this function. But then free_group() is called which performs memory deallocation again. Also, instead of free_group() call, there should be exit_dell_smbios_smm() and exit_dell_smbios_wmi() calls, since there is initialization, but there is no release of resources in case of an error. Fix these issues by replacing free_group() call with exit_dell_smbios_wmi() and exit_dell_smbios_smm(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 33b9ca1e53b4 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens") Signed-off-by: Aleksandr Mishin Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen Signed-off-by: Sasha Levin commit 79c460784fc55ccf272fbe89290ff84d3e17341c Author: Daiwei Li Date: Tue Aug 13 21:55:53 2024 -0700 igb: Fix not clearing TimeSync interrupts for 82580 [ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ] 82580 NICs have a hardware bug that makes it necessary to write into the TSICR (TimeSync Interrupt Cause) register to clear it: https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/ Add a conditional so only for 82580 we write into the TSICR register, so we don't risk losing events for other models. Without this change, when running ptp4l with an Intel 82580 card, I get the following output: > timed out while polling for tx timestamp increasing tx_timestamp_timeout or > increasing kworker priority may correct this issue, but a driver bug likely > causes it This goes away with this change. This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events"). Fixes: ee14cc9ea19b ("igb: Fix missing time sync events") Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/ Tested-by: Daiwei Li Suggested-by: Vinicius Costa Gomes Signed-off-by: Daiwei Li Acked-by: Vinicius Costa Gomes Reviewed-by: Kurt Kanzenbach Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 5c680022c4e28ba18ea500f3e29f0428271afa92 Author: Kuniyuki Iwashima Date: Mon Jul 22 12:28:42 2024 -0700 can: bcm: Remove proc entry when dev is unregistered. [ Upstream commit 76fe372ccb81b0c89b6cd2fec26e2f38c958be85 ] syzkaller reported a warning in bcm_connect() below. [0] The repro calls connect() to vxcan1, removes vxcan1, and calls connect() with ifindex == 0. Calling connect() for a BCM socket allocates a proc entry. Then, bcm_sk(sk)->bound is set to 1 to prevent further connect(). However, removing the bound device resets bcm_sk(sk)->bound to 0 in bcm_notify(). The 2nd connect() tries to allocate a proc entry with the same name and sets NULL to bcm_sk(sk)->bcm_proc_read, leaking the original proc entry. Since the proc entry is available only for connect()ed sockets, let's clean up the entry when the bound netdev is unregistered. [0]: proc_dir_entry 'can-bcm/2456' already registered WARNING: CPU: 1 PID: 394 at fs/proc/generic.c:376 proc_register+0x645/0x8f0 fs/proc/generic.c:375 Modules linked in: CPU: 1 PID: 394 Comm: syz-executor403 Not tainted 6.10.0-rc7-g852e42cc2dd4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:proc_register+0x645/0x8f0 fs/proc/generic.c:375 Code: 00 00 00 00 00 48 85 ed 0f 85 97 02 00 00 4d 85 f6 0f 85 9f 02 00 00 48 c7 c7 9b cb cf 87 48 89 de 4c 89 fa e8 1c 6f eb fe 90 <0f> 0b 90 90 48 c7 c7 98 37 99 89 e8 cb 7e 22 05 bb 00 00 00 10 48 RSP: 0018:ffa0000000cd7c30 EFLAGS: 00010246 RAX: 9e129be1950f0200 RBX: ff1100011b51582c RCX: ff1100011857cd80 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffd400000000000f R09: ff1100013e78cac0 R10: ffac800000cd7980 R11: ff1100013e12b1f0 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ff1100011a99a2ec FS: 00007fbd7086f740(0000) GS:ff1100013fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200071c0 CR3: 0000000118556004 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: proc_create_net_single+0x144/0x210 fs/proc/proc_net.c:220 bcm_connect+0x472/0x840 net/can/bcm.c:1673 __sys_connect_file net/socket.c:2049 [inline] __sys_connect+0x5d2/0x690 net/socket.c:2066 __do_sys_connect net/socket.c:2076 [inline] __se_sys_connect net/socket.c:2073 [inline] __x64_sys_connect+0x8f/0x100 net/socket.c:2073 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd9/0x1c0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fbd708b0e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fff8cd33f08 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fbd708b0e5d RDX: 0000000000000010 RSI: 0000000020000040 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000040 R09: 0000000000000040 R10: 0000000000000040 R11: 0000000000000246 R12: 00007fff8cd34098 R13: 0000000000401280 R14: 0000000000406de8 R15: 00007fbd70ab9000 remove_proc_entry: removing non-empty directory 'net/can-bcm', leaking at least '2456' Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol") Reported-by: syzkaller Signed-off-by: Kuniyuki Iwashima Reviewed-by: Simon Horman Link: https://lore.kernel.org/all/20240722192842.37421-1-kuniyu@amazon.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit d51b471ec7bd3dd9649dea1d77635512e61eaad5 Author: Jules Irenge Date: Sun May 12 23:31:21 2024 +0100 pcmcia: Use resource_size function on resource object [ Upstream commit 24a025497e7e883bd2adef5d0ece1e9b9268009f ] Cocinnele reports a warning WARNING: Suspicious code. resource_size is maybe missing with root The root cause is the function resource_size is not used when needed Use resource_size() on variable "root" of type resource Signed-off-by: Jules Irenge Signed-off-by: Dominik Brodowski Signed-off-by: Sasha Levin commit 75f8136cd4e74fca5d115c35954ed598fc771a8f Author: Chen Ni Date: Fri Jun 21 09:35:22 2024 +0800 media: qcom: camss: Add check for v4l2_fwnode_endpoint_parse [ Upstream commit 4caf6d93d9f2c11d6441c64e1c549c445fa322ed ] Add check for the return value of v4l2_fwnode_endpoint_parse() and return the error if it fails in order to catch the error. Signed-off-by: Chen Ni Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit c7167cbb59f0525f6726a621b37f2596ee1bbf83 Author: Arend van Spriel Date: Mon Jun 17 14:26:09 2024 +0200 wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3 [ Upstream commit dbb5265a5d7cca1cdba7736dba313ab7d07bc19d ] After being asked about support for WPA3 for BCM43224 chipset it was found that all it takes is setting the MFP_CAPABLE flag and mac80211 will take care of all that is needed [1]. Link: https://lore.kernel.org/linux-wireless/20200526155909.5807-2-Larry.Finger@lwfinger.net/ [1] Signed-off-by: Arend van Spriel Tested-by: Reijer Boekhoff Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240617122609.349582-1-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin commit c0c23130d38e8bc28e9ef581443de9b1fc749966 Author: Jan Kara Date: Thu Jun 20 12:52:17 2024 +0200 udf: Avoid excessive partition lengths [ Upstream commit ebbe26fd54a9621994bc16b14f2ba8f84c089693 ] Avoid mounting filesystems where the partition would overflow the 32-bits used for block number. Also refuse to mount filesystems where the partition length is so large we cannot safely index bits in a block bitmap. Link: https://patch.msgid.link/20240620130403.14731-1-jack@suse.cz Signed-off-by: Jan Kara Signed-off-by: Sasha Levin commit 471b1417b35eb52913a48ca97492f06ab918569d Author: Yunjian Wang Date: Fri May 31 11:48:47 2024 +0800 netfilter: nf_conncount: fix wrong variable type [ Upstream commit 0b88d1654d556264bcd24a9cb6383f0888e30131 ] Now there is a issue is that code checks reports a warning: implicit narrowing conversion from type 'unsigned int' to small type 'u8' (the 'keylen' variable). Fix it by removing the 'keylen' variable. Signed-off-by: Yunjian Wang Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 406fb2bc6548bbd61489637d1443606feaa7037a Author: Kuniyuki Iwashima Date: Thu Jun 20 13:56:22 2024 -0700 af_unix: Remove put_pid()/put_cred() in copy_peercred(). [ Upstream commit e4bd881d987121dbf1a288641491955a53d9f8f7 ] When (AF_UNIX, SOCK_STREAM) socket connect()s to a listening socket, the listener's sk_peer_pid/sk_peer_cred are copied to the client in copy_peercred(). Then, the client's sk_peer_pid and sk_peer_cred are always NULL, so we need not call put_pid() and put_cred() there. Signed-off-by: Kuniyuki Iwashima Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 1d755d4fb238315c3b3e50e6f3117a0d79f72c29 Author: Pali Rohár Date: Fri Jun 21 11:38:28 2024 +0200 irqchip/armada-370-xp: Do not allow mapping IRQ 0 and 1 [ Upstream commit 3cef738208e5c3cb7084e208caf9bbf684f24feb ] IRQs 0 (IPI) and 1 (MSI) are handled internally by this driver, generic_handle_domain_irq() is never called for these IRQs. Disallow mapping these IRQs. [ Marek: changed commit message ] Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Signed-off-by: Thomas Gleixner Reviewed-by: Andrew Lunn Signed-off-by: Sasha Levin commit 81e45ff912bbc43526d6f21c7a79cc5a7159a5f5 Author: Konstantin Andreev Date: Mon Jun 17 01:44:30 2024 +0300 smack: unix sockets: fix accept()ed socket label [ Upstream commit e86cac0acdb1a74f608bacefe702f2034133a047 ] When a process accept()s connection from a unix socket (either stream or seqpacket) it gets the socket with the label of the connecting process. For example, if a connecting process has a label 'foo', the accept()ed socket will also have 'in' and 'out' labels 'foo', regardless of the label of the listener process. This is because kernel creates unix child sockets in the context of the connecting process. I do not see any obvious way for the listener to abuse alien labels coming with the new socket, but, to be on the safe side, it's better fix new socket labels. Signed-off-by: Konstantin Andreev Signed-off-by: Casey Schaufler Signed-off-by: Sasha Levin commit c6d593c2c931762848389d621e8e657367f62190 Author: Takashi Iwai Date: Sun Jun 16 09:34:47 2024 +0200 ALSA: hda: Add input value sanity checks to HDMI channel map controls [ Upstream commit 6278056e42d953e207e2afd416be39d09ed2d496 ] Add a simple sanity check to HD-audio HDMI Channel Map controls. Although the value might not be accepted for the actual connection, we can filter out some bogus values beforehand, and that should be enough for making kselftest happier. Reviewed-by: Jaroslav Kysela Signed-off-by: Takashi Iwai Link: https://lore.kernel.org/20240616073454.16512-7-tiwai@suse.de Signed-off-by: Sasha Levin commit 40a2757de2c376ef8a08d9ee9c81e77f3c750adf Author: Ryusuke Konishi Date: Wed Aug 14 19:11:19 2024 +0900 nilfs2: fix state management in error path of log writing function commit 6576dd6695f2afca3f4954029ac4a64f82ba60ab upstream. After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. Link: https://lkml.kernel.org/r/20240814101119.4070-1-konishi.ryusuke@gmail.com Fixes: a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 35a9a7a7d94662146396199b0cfd95f9517cdd14 Author: Ryusuke Konishi Date: Sat Aug 10 15:52:42 2024 +0900 nilfs2: fix missing cleanup on rollforward recovery error commit 5787fcaab9eb5930f5378d6a1dd03d916d146622 upstream. In an error injection test of a routine for mount-time recovery, KASAN found a use-after-free bug. It turned out that if data recovery was performed using partial logs created by dsync writes, but an error occurred before starting the log writer to create a recovered checkpoint, the inodes whose data had been recovered were left in the ns_dirty_files list of the nilfs object and were not freed. Fix this issue by cleaning up inodes that have read the recovery data if the recovery routine fails midway before the log writer starts. Link: https://lkml.kernel.org/r/20240810065242.3701-1-konishi.ryusuke@gmail.com Fixes: 0f3e1c7f23f8 ("nilfs2: recovery functions") Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 30f9f759d7ed96735d5fe70330aab3a65456ba5f Author: Satya Priya Kakitapalli Date: Wed Jul 31 11:59:09 2024 +0530 clk: qcom: clk-alpha-pll: Fix the pll post div mask commit 2c4553e6c485a96b5d86989eb9654bf20e51e6dd upstream. The PLL_POST_DIV_MASK should be 0 to (width - 1) bits. Fix it. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio Signed-off-by: Satya Priya Kakitapalli Link: https://lore.kernel.org/r/20240731062916.2680823-2-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman commit 13d787bb4f21b6dbc8d8291bf179d36568893c25 Author: Jann Horn Date: Mon Aug 19 19:52:30 2024 +0200 fuse: use unsigned type for getxattr/listxattr size truncation commit b18915248a15eae7d901262f108d6ff0ffb4ffc1 upstream. The existing code uses min_t(ssize_t, outarg.size, XATTR_LIST_MAX) when parsing the FUSE daemon's response to a zero-length getxattr/listxattr request. On 32-bit kernels, where ssize_t and outarg.size are the same size, this is wrong: The min_t() will pass through any size values that are negative when interpreted as signed. fuse_listxattr() will then return this userspace-supplied negative value, which callers will treat as an error value. This kind of bug pattern can lead to fairly bad security bugs because of how error codes are used in the Linux kernel. If a caller were to convert the numeric error into an error pointer, like so: struct foo *func(...) { int len = fuse_getxattr(..., NULL, 0); if (len < 0) return ERR_PTR(len); ... } then it would end up returning this userspace-supplied negative value cast to a pointer - but the caller of this function wouldn't recognize it as an error pointer (IS_ERR_VALUE() only detects values in the narrow range in which legitimate errno values are), and so it would just be treated as a kernel pointer. I think there is at least one theoretical codepath where this could happen, but that path would involve virtio-fs with submounts plus some weird SELinux configuration, so I think it's probably not a concern in practice. Cc: stable@vger.kernel.org # v4.9 Fixes: 63401ccdb2ca ("fuse: limit xattr returned size") Signed-off-by: Jann Horn Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman commit 32bd402f6760d57127d58a9888553b2db574bba6 Author: Sam Protsenko Date: Wed Mar 6 17:20:52 2024 -0600 mmc: dw_mmc: Fix IDMAC operation with pages bigger than 4K commit 8396c793ffdf28bb8aee7cfe0891080f8cab7890 upstream. Commit 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk") [1] revealed the long living issue in dw_mmc.c driver, existing since the time when it was first introduced in commit f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver."), also making kernel boot broken on platforms using dw_mmc driver with 16K or 64K pages enabled, with this message in dmesg: mmcblk: probe of mmc0:0001 failed with error -22 That's happening because mmc_blk_probe() fails when it calls blk_validate_limits() consequently, which returns the error due to failed max_segment_size check in this code: /* * The maximum segment size has an odd historic 64k default that * drivers probably should override. Just like the I/O size we * require drivers to at least handle a full page per segment. */ ... if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE)) return -EINVAL; In case when IDMAC (Internal DMA Controller) is used, dw_mmc.c always sets .max_seg_size to 4 KiB: mmc->max_seg_size = 0x1000; The comment in the code above explains why it's incorrect. Arnd suggested setting .max_seg_size to .max_req_size to fix it, which is also what some other drivers are doing: $ grep -rl 'max_seg_size.*=.*max_req_size' drivers/mmc/host/ | \ wc -l 18 This change is not only fixing the boot with 16K/64K pages, but also leads to a better MMC performance. The linear write performance was tested on E850-96 board (eMMC only), before commit [1] (where it's possible to boot with 16K/64K pages without this fix, to be able to do a comparison). It was tested with this command: # dd if=/dev/zero of=somefile bs=1M count=500 oflag=sync Test results are as follows: - 4K pages, .max_seg_size = 4 KiB: 94.2 MB/s - 4K pages, .max_seg_size = .max_req_size = 512 KiB: 96.9 MB/s - 16K pages, .max_seg_size = 4 KiB: 126 MB/s - 16K pages, .max_seg_size = .max_req_size = 2 MiB: 128 MB/s - 64K pages, .max_seg_size = 4 KiB: 138 MB/s - 64K pages, .max_seg_size = .max_req_size = 8 MiB: 138 MB/s Unfortunately, SD card controller is not enabled in E850-96 yet, so it wasn't possible for me to run the test on some cheap SD cards to check this patch's impact on those. But it's possible that this change might also reduce the writes count, thus improving SD/eMMC longevity. All credit for the analysis and the suggested solution goes to Arnd. [1] https://lore.kernel.org/all/20240215070300.2200308-18-hch@lst.de/ Fixes: f95f3850f7a9 ("mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.") Suggested-by: Arnd Bergmann Reported-by: Linux Kernel Functional Testing Closes: https://lore.kernel.org/all/CA+G9fYtddf2Fd3be+YShHP6CmSDNcn0ptW8qg+stUKW+Cn0rjQ@mail.gmail.com/ Signed-off-by: Sam Protsenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240306232052.21317-1-semen.protsenko@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit f7827b47e9b2c72de0fa7cde388fdd407797be1b Author: Zheng Qixing Date: Thu Aug 22 11:30:50 2024 +0800 ata: libata: Fix memory leak for error path in ata_host_alloc() commit 284b75a3d83c7631586d98f6dede1d90f128f0db upstream. In ata_host_alloc(), if devres_alloc() fails to allocate the device host resource data pointer, the already allocated ata_host structure is not freed before returning from the function. This results in a potential memory leak. Call kfree(host) before jumping to the error handling path to ensure that the ata_host structure is properly freed if devres_alloc() fails. Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host") Cc: stable@vger.kernel.org Signed-off-by: Zheng Qixing Reviewed-by: Yu Kuai Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman commit 94e0cace44fe2b888cffc1c6905d1a9bfcf57c7a Author: Christoffer Sandberg Date: Tue Aug 27 12:25:40 2024 +0200 ALSA: hda/conexant: Add pincfg quirk to enable top speakers on Sirius devices commit 4178d78cd7a86510ba68d203f26fc01113c7f126 upstream. The Sirius notebooks have two sets of speakers 0x17 (sides) and 0x1d (top center). The side speakers are active by default but the top speakers aren't. This patch provides a pincfg quirk to activate the top speakers. Signed-off-by: Christoffer Sandberg Signed-off-by: Werner Sembach Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f0bddb4de043399f16d1969dad5ee5b984a64e7b Author: Stephen Hemminger Date: Sun Sep 1 11:16:07 2024 -0700 sch/netem: fix use after free in netem_dequeue commit 3b3a2a9c6349e25a025d2330f479bc33a6ccb54a upstream. If netem_dequeue() enqueues packet to inner qdisc and that qdisc returns __NET_XMIT_STOLEN. The packet is dropped but qdisc_tree_reduce_backlog() is not called to update the parent's q.qlen, leading to the similar use-after-free as Commit e04991a48dbaf382 ("netem: fix return value if duplicate enqueue fails") Commands to trigger KASAN UaF: ip link add type dummy ip link set lo up ip link set dummy0 up tc qdisc add dev lo parent root handle 1: drr tc filter add dev lo parent 1: basic classid 1:1 tc class add dev lo classid 1:1 drr tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2: handle 3: drr tc filter add dev lo parent 3: basic classid 3:1 action mirred egress redirect dev dummy0 tc class add dev lo classid 3:1 drr ping -c1 -W0.01 localhost # Trigger bug tc class del dev lo classid 1:1 tc class add dev lo classid 1:1 drr ping -c1 -W0.01 localhost # UaF Fixes: 50612537e9ab ("netem: fix classful handling") Reported-by: Budimir Markovic Signed-off-by: Stephen Hemminger Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 5c4b0a778419d9deab8557265f4b3fd6f0e97e11 Author: Hillf Danton Date: Thu Sep 5 15:38:13 2024 +0300 ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check [ Upstream commit 5d78e1c2b7f4be00bbe62141603a631dc7812f35 ] syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1043ae for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Takashi Iwai Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit 218f0478064e246c557d0319623eeb56f0827a8e Author: Takashi Iwai Date: Thu Sep 5 15:38:07 2024 +0300 ALSA: usb-audio: Sanity checks for each pipe and EP types [ Upstream commit 801ebf1043ae7b182588554cc9b9ad3c14bc2ab5 ] The recent USB core code performs sanity checks for the given pipe and EP types, and it can be hit by manipulated USB descriptors by syzbot. For making syzbot happier, this patch introduces a local helper for a sanity check in the driver side and calls it at each place before the message handling, so that we can avoid the WARNING splats. Reported-by: syzbot+d952e5e28f5fb7718d23@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman commit a6211d4d3df3a5f90d8bcd11acd91baf7a3c2b5d Author: Jan Kara Date: Wed Jan 25 17:56:06 2023 +0100 udf: Limit file size to 4TB commit c2efd13a2ed4f29bf9ef14ac2fbb7474084655f8 upstream. UDF disk format supports in principle file sizes up to 1<<64-1. However the file space (including holes) is described by a linked list of extents, each of which can have at most 1GB. Thus the creation and handling of extents gets unusably slow beyond certain point. Limit the file size to 4TB to avoid locking up the kernel too easily. Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman commit 19ac6f29bf64304ef04630c8ab56ecd2059d7aa1 Author: Breno Leitao Date: Fri Jul 12 04:53:25 2024 -0700 virtio_net: Fix napi_skb_cache_put warning commit f8321fa75102246d7415a6af441872f6637c93ab upstream. After the commit bdacf3e34945 ("net: Use nested-BH locking for napi_alloc_cache.") was merged, the following warning began to appear: WARNING: CPU: 5 PID: 1 at net/core/skbuff.c:1451 napi_skb_cache_put+0x82/0x4b0 __warn+0x12f/0x340 napi_skb_cache_put+0x82/0x4b0 napi_skb_cache_put+0x82/0x4b0 report_bug+0x165/0x370 handle_bug+0x3d/0x80 exc_invalid_op+0x1a/0x50 asm_exc_invalid_op+0x1a/0x20 __free_old_xmit+0x1c8/0x510 napi_skb_cache_put+0x82/0x4b0 __free_old_xmit+0x1c8/0x510 __free_old_xmit+0x1c8/0x510 __pfx___free_old_xmit+0x10/0x10 The issue arises because virtio is assuming it's running in NAPI context even when it's not, such as in the netpoll case. To resolve this, modify virtnet_poll_tx() to only set NAPI when budget is available. Same for virtnet_poll_cleantx(), which always assumed that it was in a NAPI context. Fixes: df133f3f9625 ("virtio_net: bulk free tx skbs") Suggested-by: Jakub Kicinski Signed-off-by: Breno Leitao Reviewed-by: Jakub Kicinski Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Heng Qi Link: https://patch.msgid.link/20240712115325.54175-1-leitao@debian.org Signed-off-by: Jakub Kicinski [Shivani: Modified to apply on v4.19.y-v5.10.y] Signed-off-by: Shivani Agarwal Signed-off-by: Greg Kroah-Hartman commit 9f4af4cf08f9a0329ade3d938f55d2220c40d0a6 Author: Christoph Hellwig Date: Thu Jun 13 10:48:11 2024 +0200 block: initialize integrity buffer to zero before writing it to media commit 899ee2c3829c5ac14bfc7d3c4a5846c0b709b78f upstream. Metadata added by bio_integrity_prep is using plain kmalloc, which leads to random kernel memory being written media. For PI metadata this is limited to the app tag that isn't used by kernel generated metadata, but for non-PI metadata the entire buffer leaks kernel memory. Fix this by adding the __GFP_ZERO flag to allocations for writes. Fixes: 7ba1ba12eeef ("block: Block layer data integrity support") Signed-off-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Kanchan Joshi Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20240613084839.1044015-2-hch@lst.de Signed-off-by: Jens Axboe Signed-off-by: Shivani Agarwal Signed-off-by: Greg Kroah-Hartman commit d1a4c613dd3ef57978fc366b4e3d72cd5083a1f9 Author: Ricardo Ribalda Date: Thu Apr 4 17:56:18 2024 +0000 media: uvcvideo: Enforce alignment of frame and interval [ Upstream commit c8931ef55bd325052ec496f242aea7f6de47dc9c ] Struct uvc_frame and interval (u32*) are packaged together on streaming->formats on a single contiguous allocation. Right now they are allocated right after uvc_format, without taking into consideration their required alignment. This is working fine because both structures have a field with a pointer, but it will stop working when the sizeof() of any of those structs is not a multiple of the sizeof(void*). Enforce that alignment during the allocation. Signed-off-by: Ricardo Ribalda Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin commit d3f56c653c65f170b172d3c23120bc64ada645d8 Author: Casey Schaufler Date: Wed Jun 5 15:41:50 2024 -0700 smack: tcp: ipv4, fix incorrect labeling [ Upstream commit 2fe209d0ad2e2729f7e22b9b31a86cc3ff0db550 ] Currently, Smack mirrors the label of incoming tcp/ipv4 connections: when a label 'foo' connects to a label 'bar' with tcp/ipv4, 'foo' always gets 'foo' in returned ipv4 packets. So, 1) returned packets are incorrectly labeled ('foo' instead of 'bar') 2) 'bar' can write to 'foo' without being authorized to write. Here is a scenario how to see this: * Take two machines, let's call them C and S, with active Smack in the default state (no settings, no rules, no labeled hosts, only builtin labels) * At S, add Smack rule 'foo bar w' (labels 'foo' and 'bar' are instantiated at S at this moment) * At S, at label 'bar', launch a program that listens for incoming tcp/ipv4 connections * From C, at label 'foo', connect to the listener at S. (label 'foo' is instantiated at C at this moment) Connection succeedes and works. * Send some data in both directions. * Collect network traffic of this connection. All packets in both directions are labeled with the CIPSO of the label 'foo'. Hence, label 'bar' writes to 'foo' without being authorized, and even without ever being known at C. If anybody cares: exactly the same happens with DCCP. This behavior 1st manifested in release 2.6.29.4 (see Fixes below) and it looks unintentional. At least, no explanation was provided. I changed returned packes label into the 'bar', to bring it into line with the Smack documentation claims. Signed-off-by: Konstantin Andreev Signed-off-by: Casey Schaufler Signed-off-by: Sasha Levin commit ebc88484fc780068bce82e9a593513f7f9ed947c Author: Simon Holesch Date: Sun May 19 16:15:38 2024 +0200 usbip: Don't submit special requests twice [ Upstream commit 8b6b386f9aa936ed0c190446c71cf59d4a507690 ] Skip submitting URBs, when identical requests were already sent in tweak_special_requests(). Instead call the completion handler directly to return the result of the URB. Even though submitting those requests twice should be harmless, there are USB devices that react poorly to some duplicated requests. One example is the ChipIdea controller implementation in U-Boot: The second SET_CONFIGURATION request makes U-Boot disable and re-enable all endpoints. Re-enabling an endpoint in the ChipIdea controller, however, was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget reinit"). Signed-off-by: Simon Holesch Acked-by: Shuah Khan Reviewed-by: Hongren Zheng Tested-by: Hongren Zheng Link: https://lore.kernel.org/r/20240519141922.171460-1-simon@holesch.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 8d9da10a392a32368392f7a16775e1f36e2a5346 Author: Leesoo Ahn Date: Wed May 8 01:12:29 2024 +0900 apparmor: fix possible NULL pointer dereference [ Upstream commit 3dd384108d53834002be5630132ad5c3f32166ad ] profile->parent->dents[AAFS_PROF_DIR] could be NULL only if its parent is made from __create_missing_ancestors(..) and 'ent->old' is NULL in aa_replace_profiles(..). In that case, it must return an error code and the code, -ENOENT represents its state that the path of its parent is not existed yet. BUG: kernel NULL pointer dereference, address: 0000000000000030 PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 3362 Comm: apparmor_parser Not tainted 6.8.0-24-generic #24 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Call Trace: ? show_regs+0x6d/0x80 ? __die+0x24/0x80 ? page_fault_oops+0x99/0x1b0 ? kernelmode_fixup_or_oops+0xb2/0x140 ? __bad_area_nosemaphore+0x1a5/0x2c0 ? find_vma+0x34/0x60 ? bad_area_nosemaphore+0x16/0x30 ? do_user_addr_fault+0x2a2/0x6b0 ? exc_page_fault+0x83/0x1b0 ? asm_exc_page_fault+0x27/0x30 ? aafs_create.constprop.0+0x7f/0x130 ? aafs_create.constprop.0+0x51/0x130 __aafs_profile_mkdir+0x3d6/0x480 aa_replace_profiles+0x83f/0x1270 policy_update+0xe3/0x180 profile_load+0xbc/0x150 ? rw_verify_area+0x47/0x140 vfs_write+0x100/0x480 ? __x64_sys_openat+0x55/0xa0 ? syscall_exit_to_user_mode+0x86/0x260 ksys_write+0x73/0x100 __x64_sys_write+0x19/0x30 x64_sys_call+0x7e/0x25c0 do_syscall_64+0x7f/0x180 entry_SYSCALL_64_after_hwframe+0x78/0x80 RIP: 0033:0x7be9f211c574 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89 RSP: 002b:00007ffd26f2b8c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00005d504415e200 RCX: 00007be9f211c574 RDX: 0000000000001fc1 RSI: 00005d504418bc80 RDI: 0000000000000004 RBP: 0000000000001fc1 R08: 0000000000001fc1 R09: 0000000080000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00005d504418bc80 R13: 0000000000000004 R14: 00007ffd26f2b9b0 R15: 00007ffd26f2ba30 Modules linked in: snd_seq_dummy snd_hrtimer qrtr snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device i2c_i801 snd_timer i2c_smbus qxl snd soundcore drm_ttm_helper lpc_ich ttm joydev input_leds serio_raw mac_hid binfmt_misc msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs qemu_fw_cfg ip_tables x_tables autofs4 hid_generic usbhid hid ahci libahci psmouse virtio_rng xhci_pci xhci_pci_renesas CR2: 0000000000000030 ---[ end trace 0000000000000000 ]--- RIP: 0010:aafs_create.constprop.0+0x7f/0x130 Code: 4c 63 e0 48 83 c4 18 4c 89 e0 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 45 31 d2 c3 cc cc cc cc <4d> 8b 55 30 4d 8d ba a0 00 00 00 4c 89 55 c0 4c 89 ff e8 7a 6a ae RSP: 0018:ffffc9000b2c7c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000041ed RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc9000b2c7cd8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82baac10 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007be9f22cf740(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000000134b08000 CR4: 00000000000006f0 Signed-off-by: Leesoo Ahn Signed-off-by: John Johansen Signed-off-by: Sasha Levin commit 456eb7de5747bcb505ce326dcaf9938f94735d16 Author: Michael Chen Date: Fri May 3 15:31:08 2024 -0400 drm/amdkfd: Reconcile the definition and use of oem_id in struct kfd_topology_device [ Upstream commit 10f624ef239bd136cdcc5bbc626157a57b938a31 ] Currently oem_id is defined as uint8_t[6] and casted to uint64_t* in some use case. This would lead code scanner to complain about access beyond. Re-define it in union to enforce 8-byte size and alignment to avoid potential issue. Signed-off-by: Michael Chen Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 5fa4df25ecfc7b6c9006f5b871c46cfe25ea8826 Author: Tim Huang Date: Mon May 6 16:30:01 2024 +0800 drm/amdgpu: fix mc_data out-of-bounds read warning [ Upstream commit 51dfc0a4d609fe700750a62f41447f01b8c9ea50 ] Clear warning that read mc_data[i-1] may out-of-bounds. Signed-off-by: Tim Huang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 82ac8f1d02886b5d8aeb9e058989d3bd6fc581e2 Author: Tim Huang Date: Mon May 6 16:21:00 2024 +0800 drm/amdgpu: fix ucode out-of-bounds read warning [ Upstream commit 8944acd0f9db33e17f387fdc75d33bb473d7936f ] Clear warning that read ucode[] may out-of-bounds. Signed-off-by: Tim Huang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit d1ab22df511cbe4a358421876153f4e1212132e2 Author: Tim Huang Date: Thu Apr 25 13:15:27 2024 +0800 drm/amdgpu: fix overflowed array index read warning [ Upstream commit ebbc2ada5c636a6a63d8316a3408753768f5aa9f ] Clear overflowed array index read warning by cast operation. Signed-off-by: Tim Huang Reviewed-by: Alex Deucher Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit f00ce6b3344b744af491d1edda9905b188f590a7 Author: Ma Jun Date: Wed Apr 24 10:50:54 2024 +0800 drm/amdgpu: Fix uninitialized variable warning in amdgpu_afmt_acr [ Upstream commit c0d6bd3cd209419cc46ac49562bef1db65d90e70 ] Assign value to clock to fix the warning below: "Using uninitialized value res. Field res.clock is uninitialized" Signed-off-by: Ma Jun Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit a3718c676adb9dbc24dc7b9b293020c9a20f3fdb Author: Krzysztof Kozlowski Date: Wed Aug 14 11:39:57 2024 +0200 usb: dwc3: st: add missing depopulate in probe error path [ Upstream commit cd4897bfd14f6a5388b21ba45a066541a0425199 ] Depopulate device in probe error paths to fix leak of children resources. Fixes: f83fca0707c6 ("usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski Reviewed-by: Patrice Chotard Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20240814093957.37940-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 82dde26c330f14cee56ea30bb1044f4b514c67b5 Author: Nishka Dasgupta Date: Mon Aug 19 12:54:35 2019 +0530 usb: dwc3: st: Add of_node_put() before return in probe function [ Upstream commit e36721b90144bb46e1b6477be3ab63439c7fb79b ] The local variable child in the function st_dwc3_probe takes the return value of of_get_child_by_name, which gets a node and does not put it. If the function returns without releasing child, this could cause a memory error. Hence put child as soon as there is no more use for it. Also create a new label, err_node_put, just before label undo_softreset; so that err_node_put puts child. In between initialisation of child and its first put, modify all statements that go to undo_softreset to now go to err_node_put instead, from where they can fall through to undo_softreset. Issue found with Coccinelle. Reviewed-by: Patrice Chotard Signed-off-by: Nishka Dasgupta Signed-off-by: Felipe Balbi Stable-dep-of: cd4897bfd14f ("usb: dwc3: st: add missing depopulate in probe error path") Signed-off-by: Sasha Levin commit 226a6773a78d4fd27c03cfdf1f811dbf278fb3d0 Author: ZHANG Yuntian Date: Sat Aug 3 15:46:51 2024 +0800 net: usb: qmi_wwan: add MeiG Smart SRM825L [ Upstream commit 1ca645a2f74a4290527ae27130c8611391b07dbf ] Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian Link: https://patch.msgid.link/D1EB81385E405DFE+20240803074656.567061-1-yt@radxa.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin