Must-fix bugs ============= drivers/char/ ------------- - TTY locking is broken. - see FIXME in do_tty_hangup(). This causes ppp BUGs in local_bh_enable() - Other problems: aviro, dipankar, Alan have details. - somebody will have to document the tty driver and ldisc API drivers/char/rtc/ ----------------- - rmk: I think we need a generic RTC driver (which is backed by real RTCs). Integrator-based stuff has a 32-bit 1Hz counter RTC with alarm, as has the SA11xx, and probably PXA. There's another implementation for the RiscPC and ARM26 stuff. I'd rather not see 4 implementations of the RTC userspace API, but one common implementation so that stuff gets done in a consistent way. We postponed this at the beginning of 2.4 until 2.5 happened. We're now at 2.5, and I'm about to add at least one more (the Integrator implementation.) This isn't sane imo. drivers/block/ -------------- - RAID0 dies on strangely aligned BIOs - Need to hoist BIO-split code out of device mapper, use that. (neilb) 1/ RAID5 should work fine. It accepts any sort of bio and always submits a 1-page bio to the underlying device, and if my understanding is correct, every device must be able to handle a single page bio, no matter what the alignment (which is why raid0 has a problem - it doesn't). 2/ RAID1 works pretty well. The only improvement needed is to define a merge_bvec_fn function which passes the question down to lower layers. This should be easy except for the small fact that it is impossible :-) There is no enforced pairing between calls to merge_bvec_fn and submit_bh, so it is possible that a hot spare with different restrictions could get swapped in between the one and the other and could confuse things. I suspect that can be worked around somehow though... Someone sent me a patch that is sorely needed - it allows you to simply call blk_queue_stack() (or somethink like that), and it will get your stacked limits set appropriately. 3/ I just realised that raid0 is easier than I had previously thought. We don't need the completely functional bio splitting that dm has. We only need to be able to split a bio that has just one page as the use of merge_bvec_fn will ensure that we never get a larger bio that we cannot handle. And splitting a bio with only one page is a lot easier. I now have code in my tree that implements this quite cleanly and will probably post a patch during the week. - ideraid hasn't been ported to 2.5 at all yet. - CD burning. There are still a few quirks to solve wrt SG_IO and ide-cd. Jens: The basic hang has been solved (double fault in ide-cd), there still seems to be some cases that don't work too well. Don't really have a handle on those :/ drivers/input/ -------------- - rmk: unconverted keyboard/mouse drivers (there's a deadline of 2.6.0 currently on these remaining in my/Linus' tree.) - synaptic touchpad support drivers/misc/ ------------- - rmk: UCB1[23]00 drivers, currently sitting in drivers/misc in the ARM tree. (touchscreen, audio, gpio, type device.) drivers/net/ ------------ - rmk: network drivers. ARM people like to add tonnes of #ifdefs into these to customise them to their hardware platform (eg, chip access methods, addresses, etc.) I cope with this by not integrating them into my tree. The result is that many ARM platforms can't be built from even my tree without extra patches. This isn't sane, and has bred a culture of network drivers not being submitted. I don't see this changing for 2.6 though. drivers/net/irda/ ----------------- - dongle drivers need to be converted to sir-dev - irport need to be converted to sir-kthread - new drivers (irtty-sir/smsc-ircc2/donauboe) need more testing - rmk: Refuse IrDA initialisation if sizeof(structures) is incorrect (I'm not sure if we still need this; I think gcc 2.95.3 on ARM shows this problem though.) drivers/pci/ ------------ - alan: Some cardbus crashes the system - alan: Hotplug locking is hosed drivers/pcmcia/ --------------- - alan: Most drivers crash the system on eject randomly with timer bugs. I think after RMK's stuff is in most of the pcmcia/cardbus ones go except the locking disaster. drivers/pld/ ------------ - rmk: EPXA (ARM platform) PLD hotswap drivers (drivers/pld) drivers/video/ -------------- - Lots of drivers don't compile, others do but don't work. drivers/scsi/ ------------- - hch: large parts of the locking are hosed or not existant (Mike Anderson, Patrick Mansfield, Badari Pulavarty) - shost->my_devices isn't locked down at all - the host list ist locked but not refcounted, mess can happen when the spinlock is dropped - there are lots of members of struct Scsi_Host/scsi_device/scsi_cmnd with very unclear locking, many of them probably want to become atomic_t's or bitmaps (for the 1bit bitfields). - there's lots of volatile abuse in the scsi code that needs to be thought about. - there's some global variables incremented without any locks - Convert am53c974, dpt_i2o, initio and pci2220i to DMA-mapping - Make inia100, cpqfc, pci2000 and dc390t compile - Convert wd33c99 based: a2091 a3000 gpv11 mvme174 sgiwd93 53c7xx based: amiga7xxx bvme6000 mvme16x initio am53c974 pci2000 pci2220i qla1280 sym53c8xx dc390t To new error handling I think the sym53c8xx could probably be pulled out of the tree because the sym_2 replaces it. I'm also looking at converting the qla1280. It also might be possible to shift the 53c7xx based drivers over to 53c700 which does the new EH stuff, but I don't have the hardware to check such a shift. For the non-compiling stuff, I've probably missed a few that just aren't compilable on my platforms, so any updates would be welcome. Also, are some of our non-compiling or unconverted drivers obsolete? drivers/usb/gadget/ ------------------- - rmk: SA11xx USB client/gadget code (David B has been doing some work on this, and keeps trying to prod me, but unfortunately I haven't had the time to look at his work, sorry David.) fs/ --- - ext3 data=journal mode is bust. - ext3/htree doesn't play right with NFS server. 90% fixed in -mm. - AIO/direct-IO writes can race with truncate and wreck filesystems. - Easy fix is to only allow the feature for S_ISBLK files. - hch: devfs: there's a fundamental lookup vs devfsd race that's only fixable by introducing a lookup vs devfs deadlock. I can't see how this is fixable without getting rid of the current devfsd design. Mandrake seems to have a workaround for this so this is at least not triggered so easily, but that's not what I'd consider a fix.. kernel/ ------- - O(1) scheduler starvation, poor behaviour seems unresolved. Jens: "I've been running 2.5.67-mm3 on my workstation for two days, and it still doesn't feel as good as 2.4. It's not a disaster like some revisisons ago, but it still has occasional CPU "stalls" where it feels like a process waits for half a second of so for CPU time. That's is very noticable." Also see Mike Galbraith's work. - Alan: 32bit uid support is *still* broken for process accounting. Create a 32bit uid, turn accounting on. Shock horror it doesn't work because the field is 16bit. We need an acct structure flag day for 2.6 IMHO mm/ --- - Overcommit accounting gets wrong answers - underestimates reclaimable slab, gives bogus failures when dcache&icache are large. - gets confused by reclaimable-but-not-freed truncated ext3 pages. Lame fix exists in -mm. - Proper user level no overcommit also requires a root margin adding modules ------- (Rusty) - The .modinfo patch needs to go in. It's trivial, but it's the major missing functionality vs. 2.4. Keeps bouncing off Linus. - __module_get(): "I know I have a refcount already and I don't care if they're doing rmmod --wait, gimme.". Keeps bouncing off Linus. - Per-cpu support inside modules (have patch, in testing). - shemminger: The module remove rework that Rusty and Dave are working on needs to be fixed before 2.6. Right now, it is impossible to write a protocol or network device that can be safely unloaded when it is a module. See: http://pizda.ninka.net/~davem/modules.html net/ ---- (davem) - UDP apps can in theory deadlock, because the ip_append_data path can end up sleeping while the socket lock is held. It is OK to sleep with the socket held held, normally. But in this case the sleep happens while waiting for socket memory/space to become available, if another context needs to take the socket lock to free up the space we could hang. I sent a rough patch on how to fix this to Alexey, and he is analyzing the situation. I expect a final fix from him next week or so. - Semantics for IPSEC during operations such as TCP connect suck currently. When we first try to connect to a destination, we may need to ask the IPSEC key management daemon to resolve the IPSEC routes for us. For the purposes of what the kernel needs to do, you can think of it like ARP. We can't send the packet out properly until we resolve the path. What happens now for IPSEC is basically this: O_NONBLOCK: returns -EAGAIN over and over until route is resolved !O_NONBLOCK: Sleeps until route is resolved These semantics are total crap. The solution, which Alexey is working on, is to allow incomplete routes to exist. These "incomplete" routes merely put the packet onto a "resolution queue", and once the key manager does it's thing we finish the output of the packet. This is precisely how ARP works. I don't know when Alexey will be done with this. - There are those mysterious TCP hangs of established state sockets. Someone has to get a good log in order for us to effectively debug this. net/*/netfilter/ ---------------- (Rusty) - Handle non-linear skbs everywhere. This is going in via Dave now. - Rework conntrack hashing. - Module relationship bogosity fix (trivial, have patch). sound/ ------ - rmk: several OSS drivers for SA11xx-based hardware in need of ALSA-ification and L3 bus support code for these. - rmk: linux/sound/drivers/mpu401/mpu401.c and linux/sound/drivers/virmidi.c complained about 'errno' at some time in the past, need to confirm whether this is still a problem. - rmk: need to complete ALSA-ification of the WaveArtist driver for both NetWinder and other stuff (there's some fairly fundamental differences in the way the mixer needs to be handled for the NetWinder.) global ------ - Lots of 2.4 fixes including some security are not in 2.5 - There are about 60 or 70 security related checks that need doing (copy_user etc) from Stanford tools - A couple of hundred real looking bugzilla bugs Not-ready features and speedups =============================== drivers/block/ -------------- - Framework for selecting IO schedulers. This is the main one really. Once this is in place we can drop in new schedulers any old time, no risk. - Runtime-selectable disk scheduler framework. - Anticipatory scheduler. Working OK now, still has problems with seeky OLTP-style loads. - CFQ scheduler. Seems to work but Jens planning significant rework. - The feral.com qlogic driver: needs work. fs/ --- - reiserfs_file_write() speedup. There are concerns that some applications do the wrong thing with large stat.st_blksize. - ext3 lock_kernel() removal: that part works OK and is mergeable. But we'll also need to make lock_journal() a spinlock, and that's deep surgery. - 32bit quota needs a lot more testing but may work now - Integrate Chris Mason's 2.4 reiserfs ordered data and data journaling patches. They make reiserfs a lot safer. - (Trond:) Yes: I'm still working on an atomic "open()", i.e. one where we short-circuit the usual VFS path_walk() + lookup() + permission() + create() + .... bullsh*t... I have several reasons for wanting to do this (all of them related to NFS of course, but much of the reasoning applies to *all* networked file systems). 1) The above sequence is simply not atomic on *any* networked filesystem. 2) It introduces a sh*tload of completely unnecessary RPC calls (why do a 'permission' RPC call when the server is in *any* case going to tell you whether or not this operations is allowed. Why do a 'lookup()' when the 'create()' call can be made to tell you whether or not a file already exists). 3) It is incompatible with some operations: the current create() doesn't pass an 'EXCLUSIVE' flag down to the filesystems. 4) (NFS specific?) open() has very different cache consistency requirements when compared to most other VFS operations. I'd very much like for something like Peter Braam's 'lookup with intent' or (better yet) for a proper dentry->open() to be integrated with path_walk()/open_namei(). I'm still working on the latter (Peter has already completed the lookup with intent stuff). - rmk: update acorn partition parsing code - making all acorn schemes appear in check.c so we don't have to duplicate the scanning of multiple types, and adding support for eesox partitions. kernel/ ------- (Rusty) - Zippel's Reference count simplification. Tricky code, but cuts about 120 lines from module.c. Patch exists, needs stressing. - /proc/kallsyms. What most people really wanted from /proc/ksyms. Patch exists. - Fix module-failed-init races by starting module "disabled". Patch exists, requires some subsystems (ie. add_partition) to explicitly say "make module live now". Without patch we are no worse off than 2.4 etc. - Integrate userspace irq balancing daemon. - kexec. Seems to work, is in -mm. - rmk: modules / /proc/kcore / vmalloc This needs sorting and testing to ensure that stuff like gdb vmlinux /proc/kcore works as expected. I believe this is the only show stopper preventing any ARM platform being built in Linus' kernel. - rmk: lib/inflate.c must not use static variables (causes these to be referenced via GOTOFF relocations in PIC decompressor. We have a PIC decompressor to avoid having to hard code a per platform zImage link address into the makefiles.) mm/ --- - objrmap: concerns over page reclaim performance at high sharing levels, and interoperation with nonlinear mappings is hairy. - Readd and make /proc/sys/vm/freepages writable again so that boxes can be tuned for heavy interrupt load. net/ ---- (davem) - Real serious use of IPSEC is hampered by lack of MPLS support. MPLS is a switching technology that works by switching based upon fixed length labels prepended to packets. Many people use this and IPSEC to implement VPNs over public networks, it is also used for things like traffic engineering. A good reference site is: http://www.mplsrc.com/ Anyways, an existing (crappy) implementation exists. I've almost completed a rewrite, I should have something in the tree next week. - Sometimes we generate IP fragments when it truly isn't necessary. The way IP fragmentation is specified, each fragment must be modulo 8 bytes in length. So suppose the device has an MTU that is not 0 modulo 8, ethernet even classifies in this way. 1500 == (8 * 187) + 4 Our IP fragmenting engine can fragment on packets that are sized within the last modulo 8 bytes of the MTU. This happens in obscure cases, but it does happen. I've proposed a fix to Alexey, whereby very late in the output path we check the packet, if we fragmented but the data length would fit into the MTU we unfragment the packet. This is low priority, because technically it creates suboptimal behavior rather than mis-operation. net/*/netfilter/ ---------------- - Lots of misc. cleanups, which are happening slowly. - davem: Netfilter needs to stop linearizing packets as much as possible. Zerocopy output packets are basically undone by netfilter becuase all of it assumed it was working with linear socket buffers. Rusty is fixing this piece by piece. He is nearly done with this work. power management ---------------- (Pat) There is some preliminary work at bk://ldm.bkbits.net/linux-2.5-power, though I'm currently in the process of reworking it. It includes: - New device power management core code, both for individual devices, and for global state transitions. - A generic user interface for triggering system power state transitions. - Arch-independent code for performing state transitions, that calls platform-specific methods along the way. - A better suspend-to-disk mechanism than swsusp. There are various other details to be worked out, which are the real fun part. And of course, driver support, but that is something that can happen at any time. (Alan) - PCI locking - Frame buffer restore codepaths (that requires some deep PCI magic) - XFree86 hooks - AGP restoration - DRI restoration - IDE suspend/resume without races (Ben is looking at this a little) - How to deal with devices that babble (some stuff we have to global IRQ off to save, and global IRQ on -after- we recover with APM) - Pat's swsusp rework? - Pat: There are already CPU device structures; MTRRs should be a dynamically registered interface of CPUs, which implies there needs to be some other glue to know that there are MTRRs that need to be saved/restored. arch/i386/ ---------- - Andi: i386 sub architectures for common boxes (in particular bigsmp and summit) need to be runtime probed options, not compile time. Vendors cannot ship an own kernel rpm for all these cases. (patch is in -mm, works OK). - Also PC9800 merge needs finishing to the point we want for 2.6 (not all). - ES7000 wants merging (now we are all happy with it). That shouldn't be a big problem. global ------ - 64-bit dev_t. Seems almost ready, but it's not really known how much work is still to do. Patches exist in -mm but with the recent rise of the neo-viro I'm not sure where things are at. - We need a kernel side API for reporting error events to userspace (could be async to 2.6 itself) (Prototype core based on netlink exists) - Kai: Introduce a sane, easy and standard way to build external modules - Kai: Allow separate src/objdir drivers ======= - Alan: We have multiple drivers walking the pci device lists and also using things like pci_find_device in unsafe ways with no refcounting. I think we have to make pci_find_device etc refcount somewhere and add pci_device_put as was done with networking. - Some network drivers don't even build - Alan: PCI hotplug is unsafe (locking is totally screwed) - Ditto cardbus - Alan: Cardbus/PCMCIA requires all Russell's stuff is merged to do multiheader right and so on drivers/acpi/ ------------- - davej: ACPI has a number of failures right now. There are a number of entries in bugzilla which could all be the same bug. It manifests as a "network card doesn't recieve packets" booting with 'acpi=off noapic' fixes it. alan: VIA APIC stuff is one bit of this, there are also some other reports that were caused by ACPI not setting level v edge trigger some times - davej: There's also another nasty 'doesnt boot' bug which quite a few people (myself included) are seeing on some boxes (especially laptops). drivers/block/ -------------- - Floppy is almost unusably buggy still drivers/char/ ------------- - Alan: Multiple serious bugs in the DRI drivers (most now with patches thankfully). "The badness I know about is almost entirely IRQ mishandling. DRI failing to mask PCI irqs on exit paths." (might be fixed due to DRI updates?) - Various suspect things in AGP. drivers/ide/ ------------ (Alan) - IDE requires bio walking "Bartlomiej has IDE multisector working" (does that mean it's fixed?) - IDE PIO has occasional unexplained PIO disk eating reports - IDE has multiple zillions of races/hangs in 2.5 still - IDE scsi needs rewriting - IDE needs significant reworking to handle Simplex right - IDE hotplug handling for 2.5 is completely broken still - IDE tcq. Either kill it or fix it. Not a "big todo", as such. - There are lots of other IDE bugs that wont go away until the taskfile stuff is included, the locking bugs that allow any user to hang the IDE layer in 2.5, and some other updates are forward ported. (esp. HPT372N). drivers/isdn/ ------------- (Kai, rmk) - isdn_tty locking is completely broken (cli() and friends) - fix lots of remaining bugs in the isdn link layer / hisax protocol layer / hisax subdrivers, so that at least 99% of the users have a usable ISDN subsystem - fix other drivers - lots more cleanups, adaption to recent APIs etc - fixup tty-based ISDN drivers which provide TIOCM* ioctls (see my recent 3-set patch for serial stuff) Alternatively, we could re-introduce the fallback to driver ioctl parsing for these if not enough drivers get updated. drivers/net/ ------------ - davej: Either Wireless network drivers or PCMCIA broke somewhen. A configuration that worked fine under 2.4 doesn't receive any packets. Need to look into this more to make sure I don't have any misconfiguration that just 'happened to work' under 2.4 drivers/scsi/ ------------- - Half of SCSI doesn't compile arch/i386/ ---------- - 2.5.x won't boot on some 440GX alan: Problem understood now, feasible fix in 2.4/2.4-ac. (440GX has two IRQ routers, we use the $PIR table with the PIIX, but the 440GX doesnt use the PIIX for its IRQ routing). Fall back to BIOS for 440GX works and Intel concurs. - 2.5.x doesn't handle VIA APIC right yet. 1. We must write the PCI_INTERRUPT_LINE 2. We have quirk handlers that seem to trash it. - ACPI needs the relax patches merging to work on lots of laptops - ECC driver questions are not yet sorted (DaveJ is working on this) - PC9800 is not fully merged - most of this I think is 2.7 stuff but a few bits might be 2.6 candidate arch/x86_64/ ------------ (Andi) - time handling is broken. Need to move up 2.4 time.c code. - Another report of a crash at shutdown on Simics with no iommu when all memory was used. Could be related to the one above. - NMI watchdog seems to tick too fast - some fixes from 2.4 still need to be merged - not very well tested. probably more bugs lurking. - 32bit vsyscalls seem to be broken - 32bit elf coredumps are broken - need to coredump 64bit vsyscall code with dwarf2 - move 64bit signal trampolines into vsyscall code and add dwarf2 for it. - describe kernel assembly with dwarf2 annotations for kgdb (currently waiting on some binutils changes for this) arch/arm/ --------- - rmk: missing raw keyboard translation tables for all ARM machines. Haven't even looked into this at all. This could be messy since there isn't an ARM architecture standard. I'm presently hoping that it won't be an issue. If it does, I guess we'll see drivers/char/keyboard.c explode. arch/others/ ------------ - SH3/SH3-64 need resyncing, as do some other ports. No impact on mainstream platforms hopefully.