diff -u --recursive --new-file linux-2.5.21z/linux/drivers/acorn/scsi/acornscsi.c linux-2.5.21az/linux/drivers/acorn/scsi/acornscsi.c --- linux-2.5.21z/linux/drivers/acorn/scsi/acornscsi.c Sun Jun 9 07:26:23 2002 +++ linux-2.5.21az/linux/drivers/acorn/scsi/acornscsi.c Sat Jun 15 13:43:30 2002 @@ -154,7 +154,6 @@ #include "../../scsi/scsi.h" #include "../../scsi/hosts.h" -#include "../../scsi/constants.h" #include "acornscsi.h" #include "msgqueue.h" #include "scsi.h" diff -u --recursive --new-file linux-2.5.21z/linux/drivers/acorn/scsi/cumana_1.c linux-2.5.21az/linux/drivers/acorn/scsi/cumana_1.c --- linux-2.5.21z/linux/drivers/acorn/scsi/cumana_1.c Sun Jun 9 07:27:20 2002 +++ linux-2.5.21az/linux/drivers/acorn/scsi/cumana_1.c Sat Jun 15 13:43:30 2002 @@ -61,7 +61,6 @@ #include "../../scsi/scsi.h" #include "../../scsi/hosts.h" -#include "../../scsi/constants.h" #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/acorn/scsi/ecoscsi.c linux-2.5.21az/linux/drivers/acorn/scsi/ecoscsi.c --- linux-2.5.21z/linux/drivers/acorn/scsi/ecoscsi.c Sun Jun 9 07:31:25 2002 +++ linux-2.5.21az/linux/drivers/acorn/scsi/ecoscsi.c Sat Jun 15 13:43:30 2002 @@ -54,7 +54,6 @@ #include "../../scsi/scsi.h" #include "../../scsi/hosts.h" #include "../../scsi/NCR5380.h" -#include "../../scsi/constants.h" #define ECOSCSI_PUBLIC_RELEASE 1 diff -u --recursive --new-file linux-2.5.21z/linux/drivers/acorn/scsi/oak.c linux-2.5.21az/linux/drivers/acorn/scsi/oak.c --- linux-2.5.21z/linux/drivers/acorn/scsi/oak.c Sun Jun 9 07:26:24 2002 +++ linux-2.5.21az/linux/drivers/acorn/scsi/oak.c Sat Jun 15 13:43:30 2002 @@ -59,7 +59,6 @@ #include "../../scsi/scsi.h" #include "../../scsi/hosts.h" -#include "../../scsi/constants.h" #define OAKSCSI_PUBLIC_RELEASE 1 diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/53c7,8xx.c linux-2.5.21az/linux/drivers/scsi/53c7,8xx.c --- linux-2.5.21z/linux/drivers/scsi/53c7,8xx.c Sun Jun 9 07:26:52 2002 +++ linux-2.5.21az/linux/drivers/scsi/53c7,8xx.c Sat Jun 15 13:43:30 2002 @@ -241,7 +241,6 @@ #include "scsi.h" #include "hosts.h" #include "53c7,8xx.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/53c700.c linux-2.5.21az/linux/drivers/scsi/53c700.c --- linux-2.5.21z/linux/drivers/scsi/53c700.c Sun Jun 9 07:27:39 2002 +++ linux-2.5.21az/linux/drivers/scsi/53c700.c Sat Jun 15 13:43:30 2002 @@ -129,7 +129,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "53c700.h" diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/53c7xx.c linux-2.5.21az/linux/drivers/scsi/53c7xx.c --- linux-2.5.21z/linux/drivers/scsi/53c7xx.c Sun Jun 9 07:30:07 2002 +++ linux-2.5.21az/linux/drivers/scsi/53c7xx.c Sat Jun 15 13:43:30 2002 @@ -281,7 +281,6 @@ #include "scsi.h" #include "hosts.h" #include "53c7xx.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/AM53C974.c linux-2.5.21az/linux/drivers/scsi/AM53C974.c --- linux-2.5.21z/linux/drivers/scsi/AM53C974.c Sun Jun 9 07:29:53 2002 +++ linux-2.5.21az/linux/drivers/scsi/AM53C974.c Sat Jun 15 13:43:30 2002 @@ -17,7 +17,6 @@ #include "scsi.h" #include "hosts.h" #include "AM53C974.h" -#include "constants.h" #include "sd.h" /* AM53/79C974 (PCscsi) driver release 0.5 diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/NCR_D700.c linux-2.5.21az/linux/drivers/scsi/NCR_D700.c --- linux-2.5.21z/linux/drivers/scsi/NCR_D700.c Sun Jun 9 07:27:32 2002 +++ linux-2.5.21az/linux/drivers/scsi/NCR_D700.c Sat Jun 15 13:43:30 2002 @@ -115,7 +115,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "53c700.h" #include "NCR_D700.h" diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/aha152x.c linux-2.5.21az/linux/drivers/scsi/aha152x.c --- linux-2.5.21z/linux/drivers/scsi/aha152x.c Sun Jun 9 07:26:53 2002 +++ linux-2.5.21az/linux/drivers/scsi/aha152x.c Sat Jun 15 13:43:30 2002 @@ -234,7 +234,6 @@ #include "scsi.h" #include "sd.h" #include "hosts.h" -#include "constants.h" #include #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/atari_scsi.c linux-2.5.21az/linux/drivers/scsi/atari_scsi.c --- linux-2.5.21z/linux/drivers/scsi/atari_scsi.c Sun Jun 9 07:29:57 2002 +++ linux-2.5.21az/linux/drivers/scsi/atari_scsi.c Sat Jun 15 13:43:30 2002 @@ -105,7 +105,6 @@ #include "hosts.h" #include "atari_scsi.h" #include "NCR5380.h" -#include "constants.h" #include #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/constants.c linux-2.5.21az/linux/drivers/scsi/constants.c --- linux-2.5.21z/linux/drivers/scsi/constants.c Sun Jun 9 07:30:56 2002 +++ linux-2.5.21az/linux/drivers/scsi/constants.c Sat Jun 15 13:43:30 2002 @@ -2,7 +2,8 @@ * ASCII values for a number of symbolic constants, printing functions, * etc. * Additions for SCSI 2 and Linux 2.2.x by D. Gilbert (990422) - * + * Additions for SCSI 3+ (SPC-3 T10/1416-D Rev 07 3 May 2002) + * by D. Gilbert and aeb (20020609) */ #include @@ -147,661 +148,856 @@ printk("\n"); } +/** + * + * print_status - print scsi status description + * @scsi_status: scsi status value + * + * If the status is recognized, the description is printed. + * Otherwise "Unknown status" is output. No trailing space. + * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex + * (e.g. "0x2" for Check Condition). + **/ +void +print_status(unsigned char scsi_status) { #if (CONSTANTS & CONST_STATUS) -static const char * statuses[] = { -/* 0-4 */ "Good", "Check Condition", "Condition Met", unknown, "Busy", -/* 5-9 */ unknown, unknown, unknown, "Intermediate", unknown, -/* a-c */ "Intermediate-Condition Met", unknown, "Reservation Conflict", -/* d-10 */ unknown, unknown, unknown, unknown, -/* 11-14 */ "Command Terminated", unknown, unknown, "Queue Full", -/* 15-1a */ unknown, unknown, unknown, unknown, unknown, unknown, -/* 1b-1f */ unknown, unknown, unknown, unknown, unknown, -}; -#endif + const char * ccp; -void print_status (int status) { - status = (status >> 1) & 0x1f; -#if (CONSTANTS & CONST_STATUS) - printk("%s ",statuses[status]); + switch (scsi_status) { + case 0: ccp = "Good"; break; + case 0x2: ccp = "Check Condition"; break; + case 0x4: ccp = "Condition Met"; break; + case 0x8: ccp = "Busy"; break; + case 0x10: ccp = "Intermediate"; break; + case 0x14: ccp = "Intermediate-Condition Met"; break; + case 0x18: ccp = "Reservation Conflict"; break; + case 0x22: ccp = "Command Terminated"; break; /* obsolete */ + case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */ + case 0x30: ccp = "ACA Active"; break; + case 0x40: ccp = "Task Aborted"; break; + default: ccp = "Unknown status"; + } + printk("%s", ccp); #else - printk("0x%0x ", status); -#endif + printk("0x%0x", scsi_status); +#endif } #if (CONSTANTS & CONST_XSENSE) -#define D 0x0001 /* DIRECT ACCESS DEVICE (disk) */ -#define T 0x0002 /* SEQUENTIAL ACCESS DEVICE (tape) */ -#define L 0x0004 /* PRINTER DEVICE */ -#define P 0x0008 /* PROCESSOR DEVICE */ -#define W 0x0010 /* WRITE ONCE READ MULTIPLE DEVICE */ -#define R 0x0020 /* READ ONLY (CD-ROM) DEVICE */ -#define S 0x0040 /* SCANNER DEVICE */ -#define O 0x0080 /* OPTICAL MEMORY DEVICE */ -#define M 0x0100 /* MEDIA CHANGER DEVICE */ -#define C 0x0200 /* COMMUNICATION DEVICE */ -#define A 0x0400 /* ARRAY STORAGE */ -#define E 0x0800 /* ENCLOSURE SERVICES DEVICE */ -#define B 0x1000 /* SIMPLIFIED DIRECT ACCESS DEVICE */ -#define K 0x2000 /* OPTICAL CARD READER/WRITER DEVICE */ - -struct error_info{ - unsigned char code1, code2; - unsigned short int devices; - const char * text; -}; - -struct error_info2{ - unsigned char code1, code2_min, code2_max; - unsigned short int devices; - const char * text; + +struct error_info { + unsigned short code12; /* 0x0302 looks better than 0x03,0x02 */ + const char * text; }; -static struct error_info2 additional2[] = +static struct error_info additional[] = { - {0x40,0x00,0x7f,D,"Ram failure (%x)"}, - {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, - {0x41,0x00,0xff,D,"Data path failure (%x)"}, - {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"}, - {0, 0, 0, 0, NULL} + {0x0000, "No additional sense information"}, + {0x0001, "Filemark detected"}, + {0x0002, "End-of-partition/medium detected"}, + {0x0003, "Setmark detected"}, + {0x0004, "Beginning-of-partition/medium detected"}, + {0x0005, "End-of-data detected"}, + {0x0006, "I/O process terminated"}, + {0x0011, "Audio play operation in progress"}, + {0x0012, "Audio play operation paused"}, + {0x0013, "Audio play operation successfully completed"}, + {0x0014, "Audio play operation stopped due to error"}, + {0x0015, "No current audio status to return"}, + {0x0016, "Operation in progress"}, + {0x0017, "Cleaning requested"}, + {0x0018, "Erase operation in progress"}, + {0x0019, "Locate operation in progress"}, + {0x001A, "Rewind operation in progress"}, + {0x001B, "Set capacity operation in progress"}, + {0x001C, "Verify operation in progress"}, + + {0x0100, "No index/sector signal"}, + + {0x0200, "No seek complete"}, + + {0x0300, "Peripheral device write fault"}, + {0x0301, "No write current"}, + {0x0302, "Excessive write errors"}, + + {0x0400, "Logical unit not ready, cause not reportable"}, + {0x0401, "Logical unit is in process of becoming ready"}, + {0x0402, "Logical unit not ready, initializing cmd. required"}, + {0x0403, "Logical unit not ready, manual intervention required"}, + {0x0404, "Logical unit not ready, format in progress"}, + {0x0405, "Logical unit not ready, rebuild in progress"}, + {0x0406, "Logical unit not ready, recalculation in progress"}, + {0x0407, "Logical unit not ready, operation in progress"}, + {0x0408, "Logical unit not ready, long write in progress"}, + {0x0409, "Logical unit not ready, self-test in progress"}, + {0x040A, "Logical unit not accessible, asymmetric access state " + "transition"}, + {0x040B, "Logical unit not accessible, target port in standby state"}, + {0x040C, "Logical unit not accessible, target port in unavailable " + "state"}, + {0x0410, "Logical unit not ready, auxiliary memory not accessible"}, + + {0x0500, "Logical unit does not respond to selection"}, + + {0x0600, "No reference position found"}, + + {0x0700, "Multiple peripheral devices selected"}, + + {0x0800, "Logical unit communication failure"}, + {0x0801, "Logical unit communication time-out"}, + {0x0802, "Logical unit communication parity error"}, + {0x0803, "Logical unit communication CRC error (Ultra-DMA/32)"}, + {0x0804, "Unreachable copy target"}, + + {0x0900, "Track following error"}, + {0x0901, "Tracking servo failure"}, + {0x0902, "Focus servo failure"}, + {0x0903, "Spindle servo failure"}, + {0x0904, "Head select fault"}, + + {0x0A00, "Error log overflow"}, + + {0x0B00, "Warning"}, + {0x0B01, "Warning - specified temperature exceeded"}, + {0x0B02, "Warning - enclosure degraded"}, + + {0x0C00, "Write error"}, + {0x0C01, "Write error - recovered with auto reallocation"}, + {0x0C02, "Write error - auto reallocation failed"}, + {0x0C03, "Write error - recommend reassignment"}, + {0x0C04, "Compression check miscompare error"}, + {0x0C05, "Data expansion occurred during compression"}, + {0x0C06, "Block not compressible"}, + {0x0C07, "Write error - recovery needed"}, + {0x0C08, "Write error - recovery failed"}, + {0x0C09, "Write error - loss of streaming"}, + {0x0C0A, "Write error - padding blocks added"}, + {0x0C0B, "Auxiliary memory write error"}, + {0x0C0C, "Write error - unexpected unsolicited data"}, + {0x0C0D, "Write error - not enough unsolicited data"}, + + {0x0D00, "Error detected by third party temporary initiator"}, + {0x0D01, "Third party device failure"}, + {0x0D02, "Copy target device not reachable"}, + {0x0D03, "Incorrect copy target device type"}, + {0x0D04, "Copy target device data underrun"}, + {0x0D05, "Copy target device data overrun"}, + + {0x1000, "Id CRC or ECC error"}, + + {0x1100, "Unrecovered read error"}, + {0x1101, "Read retries exhausted"}, + {0x1102, "Error too long to correct"}, + {0x1103, "Multiple read errors"}, + {0x1104, "Unrecovered read error - auto reallocate failed"}, + {0x1105, "L-EC uncorrectable error"}, + {0x1106, "CIRC unrecovered error"}, + {0x1107, "Data re-synchronization error"}, + {0x1108, "Incomplete block read"}, + {0x1109, "No gap found"}, + {0x110A, "Miscorrected error"}, + {0x110B, "Unrecovered read error - recommend reassignment"}, + {0x110C, "Unrecovered read error - recommend rewrite the data"}, + {0x110D, "De-compression CRC error"}, + {0x110E, "Cannot decompress using declared algorithm"}, + {0x110F, "Error reading UPC/EAN number"}, + {0x1110, "Error reading ISRC number"}, + {0x1111, "Read error - loss of streaming"}, + {0x1112, "Auxiliary memory read error"}, + {0x1113, "Read error - failed retransmission request"}, + + {0x1200, "Address mark not found for id field"}, + + {0x1300, "Address mark not found for data field"}, + + {0x1400, "Recorded entity not found"}, + {0x1401, "Record not found"}, + {0x1402, "Filemark or setmark not found"}, + {0x1403, "End-of-data not found"}, + {0x1404, "Block sequence error"}, + {0x1405, "Record not found - recommend reassignment"}, + {0x1406, "Record not found - data auto-reallocated"}, + {0x1407, "Locate operation failure"}, + + {0x1500, "Random positioning error"}, + {0x1501, "Mechanical positioning error"}, + {0x1502, "Positioning error detected by read of medium"}, + + {0x1600, "Data synchronization mark error"}, + {0x1601, "Data sync error - data rewritten"}, + {0x1602, "Data sync error - recommend rewrite"}, + {0x1603, "Data sync error - data auto-reallocated"}, + {0x1604, "Data sync error - recommend reassignment"}, + + {0x1700, "Recovered data with no error correction applied"}, + {0x1701, "Recovered data with retries"}, + {0x1702, "Recovered data with positive head offset"}, + {0x1703, "Recovered data with negative head offset"}, + {0x1704, "Recovered data with retries and/or circ applied"}, + {0x1705, "Recovered data using previous sector id"}, + {0x1706, "Recovered data without ECC - data auto-reallocated"}, + {0x1707, "Recovered data without ECC - recommend reassignment"}, + {0x1708, "Recovered data without ECC - recommend rewrite"}, + {0x1709, "Recovered data without ECC - data rewritten"}, + + {0x1800, "Recovered data with error correction applied"}, + {0x1801, "Recovered data with error corr. & retries applied"}, + {0x1802, "Recovered data - data auto-reallocated"}, + {0x1803, "Recovered data with CIRC"}, + {0x1804, "Recovered data with L-EC"}, + {0x1805, "Recovered data - recommend reassignment"}, + {0x1806, "Recovered data - recommend rewrite"}, + {0x1807, "Recovered data with ECC - data rewritten"}, + {0x1808, "Recovered data with linking"}, + + {0x1900, "Defect list error"}, + {0x1901, "Defect list not available"}, + {0x1902, "Defect list error in primary list"}, + {0x1903, "Defect list error in grown list"}, + + {0x1A00, "Parameter list length error"}, + + {0x1B00, "Synchronous data transfer error"}, + + {0x1C00, "Defect list not found"}, + {0x1C01, "Primary defect list not found"}, + {0x1C02, "Grown defect list not found"}, + + {0x1D00, "Miscompare during verify operation"}, + + {0x1E00, "Recovered id with ECC correction"}, + + {0x1F00, "Partial defect list transfer"}, + + {0x2000, "Invalid command operation code"}, + {0x2001, "Access denied - initiator pending-enrolled"}, + {0x2002, "Access denied - no access rights"}, + {0x2003, "Access denied - invalid mgmt id key"}, + {0x2004, "Illegal command while in write capable state"}, + {0x2005, "Obsolete"}, + {0x2006, "Illegal command while in explicit address mode"}, + {0x2007, "Illegal command while in implicit address mode"}, + {0x2008, "Access denied - enrollment conflict"}, + {0x2009, "Access denied - invalid LU identifier"}, + {0x200A, "Access denied - invalid proxy token"}, + {0x200B, "Access denied - ACL LUN conflict"}, + + {0x2100, "Logical block address out of range"}, + {0x2101, "Invalid element address"}, + {0x2102, "Invalid address for write"}, + + {0x2200, "Illegal function (use 20 00, 24 00, or 26 00)"}, + + {0x2400, "Invalid field in cdb"}, + {0x2401, "CDB decryption error"}, + {0x2402, "Obsolete"}, + {0x2403, "Obsolete"}, + + {0x2500, "Logical unit not supported"}, + + {0x2600, "Invalid field in parameter list"}, + {0x2601, "Parameter not supported"}, + {0x2602, "Parameter value invalid"}, + {0x2603, "Threshold parameters not supported"}, + {0x2604, "Invalid release of persistent reservation"}, + {0x2605, "Data decryption error"}, + {0x2606, "Too many target descriptors"}, + {0x2607, "Unsupported target descriptor type code"}, + {0x2608, "Too many segment descriptors"}, + {0x2609, "Unsupported segment descriptor type code"}, + {0x260A, "Unexpected inexact segment"}, + {0x260B, "Inline data length exceeded"}, + {0x260C, "Invalid operation for copy source or destination"}, + {0x260D, "Copy segment granularity violation"}, + + {0x2700, "Write protected"}, + {0x2701, "Hardware write protected"}, + {0x2702, "Logical unit software write protected"}, + {0x2703, "Associated write protect"}, + {0x2704, "Persistent write protect"}, + {0x2705, "Permanent write protect"}, + {0x2706, "Conditional write protect"}, + + {0x2800, "Not ready to ready change, medium may have changed"}, + {0x2801, "Import or export element accessed"}, + + {0x2900, "Power on, reset, or bus device reset occurred"}, + {0x2901, "Power on occurred"}, + {0x2902, "Scsi bus reset occurred"}, + {0x2903, "Bus device reset function occurred"}, + {0x2904, "Device internal reset"}, + {0x2905, "Transceiver mode changed to single-ended"}, + {0x2906, "Transceiver mode changed to lvd"}, + {0x2907, "I_T nexus loss occurred"}, + + {0x2A00, "Parameters changed"}, + {0x2A01, "Mode parameters changed"}, + {0x2A02, "Log parameters changed"}, + {0x2A03, "Reservations preempted"}, + {0x2A04, "Reservations released"}, + {0x2A05, "Registrations preempted"}, + {0x2A06, "Asymmetric access state changed"}, + {0x2A07, "Implicit asymmetric access state transition failed"}, + + {0x2B00, "Copy cannot execute since host cannot disconnect"}, + + {0x2C00, "Command sequence error"}, + {0x2C01, "Too many windows specified"}, + {0x2C02, "Invalid combination of windows specified"}, + {0x2C03, "Current program area is not empty"}, + {0x2C04, "Current program area is empty"}, + {0x2C05, "Illegal power condition request"}, + {0x2C06, "Persistent prevent conflict"}, + {0x2C07, "Previous busy status"}, + {0x2C08, "Previous task set full status"}, + {0x2C09, "Previous reservation conflict status"}, + + {0x2D00, "Overwrite error on update in place"}, + + {0x2E00, "Insufficient time for operation"}, + + {0x2F00, "Commands cleared by another initiator"}, + + {0x3000, "Incompatible medium installed"}, + {0x3001, "Cannot read medium - unknown format"}, + {0x3002, "Cannot read medium - incompatible format"}, + {0x3003, "Cleaning cartridge installed"}, + {0x3004, "Cannot write medium - unknown format"}, + {0x3005, "Cannot write medium - incompatible format"}, + {0x3006, "Cannot format medium - incompatible medium"}, + {0x3007, "Cleaning failure"}, + {0x3008, "Cannot write - application code mismatch"}, + {0x3009, "Current session not fixated for append"}, + {0x3010, "Medium not formatted"}, + + {0x3100, "Medium format corrupted"}, + {0x3101, "Format command failed"}, + {0x3102, "Zoned formatting failed due to spare linking"}, + + {0x3200, "No defect spare location available"}, + {0x3201, "Defect list update failure"}, + + {0x3300, "Tape length error"}, + + {0x3400, "Enclosure failure"}, + + {0x3500, "Enclosure services failure"}, + {0x3501, "Unsupported enclosure function"}, + {0x3502, "Enclosure services unavailable"}, + {0x3503, "Enclosure services transfer failure"}, + {0x3504, "Enclosure services transfer refused"}, + + {0x3600, "Ribbon, ink, or toner failure"}, + + {0x3700, "Rounded parameter"}, + + {0x3800, "Event status notification"}, + {0x3802, "Esn - power management class event"}, + {0x3804, "Esn - media class event"}, + {0x3806, "Esn - device busy class event"}, + + {0x3900, "Saving parameters not supported"}, + + {0x3A00, "Medium not present"}, + {0x3A01, "Medium not present - tray closed"}, + {0x3A02, "Medium not present - tray open"}, + {0x3A03, "Medium not present - loadable"}, + {0x3A04, "Medium not present - medium auxiliary memory accessible"}, + + {0x3B00, "Sequential positioning error"}, + {0x3B01, "Tape position error at beginning-of-medium"}, + {0x3B02, "Tape position error at end-of-medium"}, + {0x3B03, "Tape or electronic vertical forms unit not ready"}, + {0x3B04, "Slew failure"}, + {0x3B05, "Paper jam"}, + {0x3B06, "Failed to sense top-of-form"}, + {0x3B07, "Failed to sense bottom-of-form"}, + {0x3B08, "Reposition error"}, + {0x3B09, "Read past end of medium"}, + {0x3B0A, "Read past beginning of medium"}, + {0x3B0B, "Position past end of medium"}, + {0x3B0C, "Position past beginning of medium"}, + {0x3B0D, "Medium destination element full"}, + {0x3B0E, "Medium source element empty"}, + {0x3B0F, "End of medium reached"}, + {0x3B11, "Medium magazine not accessible"}, + {0x3B12, "Medium magazine removed"}, + {0x3B13, "Medium magazine inserted"}, + {0x3B14, "Medium magazine locked"}, + {0x3B15, "Medium magazine unlocked"}, + {0x3B16, "Mechanical positioning or changer error"}, + + {0x3D00, "Invalid bits in identify message"}, + + {0x3E00, "Logical unit has not self-configured yet"}, + {0x3E01, "Logical unit failure"}, + {0x3E02, "Timeout on logical unit"}, + {0x3E03, "Logical unit failed self-test"}, + {0x3E04, "Logical unit unable to update self-test log"}, + + {0x3F00, "Target operating conditions have changed"}, + {0x3F01, "Microcode has been changed"}, + {0x3F02, "Changed operating definition"}, + {0x3F03, "Inquiry data has changed"}, + {0x3F04, "Component device attached"}, + {0x3F05, "Device identifier changed"}, + {0x3F06, "Redundancy group created or modified"}, + {0x3F07, "Redundancy group deleted"}, + {0x3F08, "Spare created or modified"}, + {0x3F09, "Spare deleted"}, + {0x3F0A, "Volume set created or modified"}, + {0x3F0B, "Volume set deleted"}, + {0x3F0C, "Volume set deassigned"}, + {0x3F0D, "Volume set reassigned"}, + {0x3F0E, "Reported luns data has changed"}, + {0x3F0F, "Echo buffer overwritten"}, + {0x3F10, "Medium loadable"}, + {0x3F11, "Medium auxiliary memory accessible"}, + +#if 0 + {0x40NN, "Ram failure"}, + {0x40NN, "Diagnostic failure on component nn"}, + {0x41NN, "Data path failure"}, + {0x42NN, "Power-on or self-test failure"}, +#endif + + {0x4300, "Message error"}, + + {0x4400, "Internal target failure"}, + + {0x4500, "Select or reselect failure"}, + + {0x4600, "Unsuccessful soft reset"}, + + {0x4700, "Scsi parity error"}, + {0x4701, "Data phase CRC error detected"}, + {0x4702, "Scsi parity error detected during st data phase"}, + {0x4703, "Information unit CRC error detected"}, + {0x4704, "Asynchronous information protection error detected"}, + {0x4705, "Protocol service CRC error"}, + + {0x4800, "Initiator detected error message received"}, + + {0x4900, "Invalid message error"}, + + {0x4A00, "Command phase error"}, + + {0x4B00, "Data phase error"}, + + {0x4C00, "Logical unit failed self-configuration"}, + +#if 0 + {0x4DNN, "Tagged overlapped commands (nn = queue tag)"}, +#endif + + {0x4E00, "Overlapped commands attempted"}, + + {0x5000, "Write append error"}, + {0x5001, "Write append position error"}, + {0x5002, "Position error related to timing"}, + + {0x5100, "Erase failure"}, + {0x5101, "Erase failure - incomplete erase operation detected"}, + + {0x5200, "Cartridge fault"}, + + {0x5300, "Media load or eject failed"}, + {0x5301, "Unload tape failure"}, + {0x5302, "Medium removal prevented"}, + + {0x5400, "Scsi to host system interface failure"}, + + {0x5500, "System resource failure"}, + {0x5501, "System buffer full"}, + {0x5502, "Insufficient reservation resources"}, + {0x5503, "Insufficient resources"}, + {0x5504, "Insufficient registration resources"}, + {0x5505, "Insufficient access control resources"}, + {0x5506, "Auxiliary memory out of space"}, + + {0x5700, "Unable to recover table-of-contents"}, + + {0x5800, "Generation does not exist"}, + + {0x5900, "Updated block read"}, + + {0x5A00, "Operator request or state change input"}, + {0x5A01, "Operator medium removal request"}, + {0x5A02, "Operator selected write protect"}, + {0x5A03, "Operator selected write permit"}, + + {0x5B00, "Log exception"}, + {0x5B01, "Threshold condition met"}, + {0x5B02, "Log counter at maximum"}, + {0x5B03, "Log list codes exhausted"}, + + {0x5C00, "Rpl status change"}, + {0x5C01, "Spindles synchronized"}, + {0x5C02, "Spindles not synchronized"}, + + {0x5D00, "Failure prediction threshold exceeded"}, + {0x5D01, "Media failure prediction threshold exceeded"}, + {0x5D02, "Logical unit failure prediction threshold exceeded"}, + {0x5D03, "Spare area exhaustion prediction threshold exceeded"}, + {0x5D10, "Hardware impending failure general hard drive failure"}, + {0x5D11, "Hardware impending failure drive error rate too high"}, + {0x5D12, "Hardware impending failure data error rate too high"}, + {0x5D13, "Hardware impending failure seek error rate too high"}, + {0x5D14, "Hardware impending failure too many block reassigns"}, + {0x5D15, "Hardware impending failure access times too high"}, + {0x5D16, "Hardware impending failure start unit times too high"}, + {0x5D17, "Hardware impending failure channel parametrics"}, + {0x5D18, "Hardware impending failure controller detected"}, + {0x5D19, "Hardware impending failure throughput performance"}, + {0x5D1A, "Hardware impending failure seek time performance"}, + {0x5D1B, "Hardware impending failure spin-up retry count"}, + {0x5D1C, "Hardware impending failure drive calibration retry count"}, + {0x5D20, "Controller impending failure general hard drive failure"}, + {0x5D21, "Controller impending failure drive error rate too high"}, + {0x5D22, "Controller impending failure data error rate too high"}, + {0x5D23, "Controller impending failure seek error rate too high"}, + {0x5D24, "Controller impending failure too many block reassigns"}, + {0x5D25, "Controller impending failure access times too high"}, + {0x5D26, "Controller impending failure start unit times too high"}, + {0x5D27, "Controller impending failure channel parametrics"}, + {0x5D28, "Controller impending failure controller detected"}, + {0x5D29, "Controller impending failure throughput performance"}, + {0x5D2A, "Controller impending failure seek time performance"}, + {0x5D2B, "Controller impending failure spin-up retry count"}, + {0x5D2C, "Controller impending failure drive calibration retry count"}, + {0x5D30, "Data channel impending failure general hard drive failure"}, + {0x5D31, "Data channel impending failure drive error rate too high"}, + {0x5D32, "Data channel impending failure data error rate too high"}, + {0x5D33, "Data channel impending failure seek error rate too high"}, + {0x5D34, "Data channel impending failure too many block reassigns"}, + {0x5D35, "Data channel impending failure access times too high"}, + {0x5D36, "Data channel impending failure start unit times too high"}, + {0x5D37, "Data channel impending failure channel parametrics"}, + {0x5D38, "Data channel impending failure controller detected"}, + {0x5D39, "Data channel impending failure throughput performance"}, + {0x5D3A, "Data channel impending failure seek time performance"}, + {0x5D3B, "Data channel impending failure spin-up retry count"}, + {0x5D3C, "Data channel impending failure drive calibration retry " + "count"}, + {0x5D40, "Servo impending failure general hard drive failure"}, + {0x5D41, "Servo impending failure drive error rate too high"}, + {0x5D42, "Servo impending failure data error rate too high"}, + {0x5D43, "Servo impending failure seek error rate too high"}, + {0x5D44, "Servo impending failure too many block reassigns"}, + {0x5D45, "Servo impending failure access times too high"}, + {0x5D46, "Servo impending failure start unit times too high"}, + {0x5D47, "Servo impending failure channel parametrics"}, + {0x5D48, "Servo impending failure controller detected"}, + {0x5D49, "Servo impending failure throughput performance"}, + {0x5D4A, "Servo impending failure seek time performance"}, + {0x5D4B, "Servo impending failure spin-up retry count"}, + {0x5D4C, "Servo impending failure drive calibration retry count"}, + {0x5D50, "Spindle impending failure general hard drive failure"}, + {0x5D51, "Spindle impending failure drive error rate too high"}, + {0x5D52, "Spindle impending failure data error rate too high"}, + {0x5D53, "Spindle impending failure seek error rate too high"}, + {0x5D54, "Spindle impending failure too many block reassigns"}, + {0x5D55, "Spindle impending failure access times too high"}, + {0x5D56, "Spindle impending failure start unit times too high"}, + {0x5D57, "Spindle impending failure channel parametrics"}, + {0x5D58, "Spindle impending failure controller detected"}, + {0x5D59, "Spindle impending failure throughput performance"}, + {0x5D5A, "Spindle impending failure seek time performance"}, + {0x5D5B, "Spindle impending failure spin-up retry count"}, + {0x5D5C, "Spindle impending failure drive calibration retry count"}, + {0x5D60, "Firmware impending failure general hard drive failure"}, + {0x5D61, "Firmware impending failure drive error rate too high"}, + {0x5D62, "Firmware impending failure data error rate too high"}, + {0x5D63, "Firmware impending failure seek error rate too high"}, + {0x5D64, "Firmware impending failure too many block reassigns"}, + {0x5D65, "Firmware impending failure access times too high"}, + {0x5D66, "Firmware impending failure start unit times too high"}, + {0x5D67, "Firmware impending failure channel parametrics"}, + {0x5D68, "Firmware impending failure controller detected"}, + {0x5D69, "Firmware impending failure throughput performance"}, + {0x5D6A, "Firmware impending failure seek time performance"}, + {0x5D6B, "Firmware impending failure spin-up retry count"}, + {0x5D6C, "Firmware impending failure drive calibration retry count"}, + {0x5DFF, "Failure prediction threshold exceeded (false)"}, + + {0x5E00, "Low power condition on"}, + {0x5E01, "Idle condition activated by timer"}, + {0x5E02, "Standby condition activated by timer"}, + {0x5E03, "Idle condition activated by command"}, + {0x5E04, "Standby condition activated by command"}, + {0x5E41, "Power state change to active"}, + {0x5E42, "Power state change to idle"}, + {0x5E43, "Power state change to standby"}, + {0x5E45, "Power state change to sleep"}, + {0x5E47, "Power state change to device control"}, + + {0x6000, "Lamp failure"}, + + {0x6100, "Video acquisition error"}, + {0x6101, "Unable to acquire video"}, + {0x6102, "Out of focus"}, + + {0x6200, "Scan head positioning error"}, + + {0x6300, "End of user area encountered on this track"}, + {0x6301, "Packet does not fit in available space"}, + + {0x6400, "Illegal mode for this track"}, + {0x6401, "Invalid packet size"}, + + {0x6500, "Voltage fault"}, + + {0x6600, "Automatic document feeder cover up"}, + {0x6601, "Automatic document feeder lift up"}, + {0x6602, "Document jam in automatic document feeder"}, + {0x6603, "Document miss feed automatic in document feeder"}, + + {0x6700, "Configuration failure"}, + {0x6701, "Configuration of incapable logical units failed"}, + {0x6702, "Add logical unit failed"}, + {0x6703, "Modification of logical unit failed"}, + {0x6704, "Exchange of logical unit failed"}, + {0x6705, "Remove of logical unit failed"}, + {0x6706, "Attachment of logical unit failed"}, + {0x6707, "Creation of logical unit failed"}, + {0x6708, "Assign failure occurred"}, + {0x6709, "Multiply assigned logical unit"}, + {0x670A, "Set target port groups command failed"}, + + {0x6800, "Logical unit not configured"}, + + {0x6900, "Data loss on logical unit"}, + {0x6901, "Multiple logical unit failures"}, + {0x6902, "Parity/data mismatch"}, + + {0x6A00, "Informational, refer to log"}, + + {0x6B00, "State change has occurred"}, + {0x6B01, "Redundancy level got better"}, + {0x6B02, "Redundancy level got worse"}, + + {0x6C00, "Rebuild failure occurred"}, + + {0x6D00, "Recalculate failure occurred"}, + + {0x6E00, "Command to logical unit failed"}, + + {0x6F00, "Copy protection key exchange failure - authentication " + "failure"}, + {0x6F01, "Copy protection key exchange failure - key not present"}, + {0x6F02, "Copy protection key exchange failure - key not established"}, + {0x6F03, "Read of scrambled sector without authentication"}, + {0x6F04, "Media region code is mismatched to logical unit region"}, + {0x6F05, "Drive region must be permanent/region reset count error"}, + +#if 0 + {0x70NN, "Decompression exception short algorithm id of nn"}, +#endif + + {0x7100, "Decompression exception long algorithm id"}, + + {0x7200, "Session fixation error"}, + {0x7201, "Session fixation error writing lead-in"}, + {0x7202, "Session fixation error writing lead-out"}, + {0x7203, "Session fixation error - incomplete track in session"}, + {0x7204, "Empty or partially written reserved track"}, + {0x7205, "No more track reservations allowed"}, + + {0x7300, "Cd control error"}, + {0x7301, "Power calibration area almost full"}, + {0x7302, "Power calibration area is full"}, + {0x7303, "Power calibration area error"}, + {0x7304, "Program memory area update failure"}, + {0x7305, "Program memory area is full"}, + {0x7306, "RMA/PMA is almost full"}, + {0, NULL} }; -static struct error_info additional[] = +struct error_info2 { + unsigned char code1, code2_min, code2_max; + const char * fmt; +}; + +static struct error_info2 additional2[] = { - {0x00,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"No additional sense information"}, - {0x00,0x01,T,"Filemark detected"}, - {0x00,0x02,T|S,"End-of-partition/medium detected"}, - {0x00,0x03,T,"Setmark detected"}, - {0x00,0x04,T|S,"Beginning-of-partition/medium detected"}, - {0x00,0x05,T|L|S,"End-of-data detected"}, - {0x00,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"I/O process terminated"}, - {0x00,0x11,R,"Audio play operation in progress"}, - {0x00,0x12,R,"Audio play operation paused"}, - {0x00,0x13,R,"Audio play operation successfully completed"}, - {0x00,0x14,R,"Audio play operation stopped due to error"}, - {0x00,0x15,R,"No current audio status to return"}, - {0x00,0x16,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Operation in progress"}, - {0x00,0x17,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning requested"}, - {0x01,0x00,D|W|O|B|K,"No index/sector signal"}, - {0x02,0x00,D|W|R|O|M|B|K,"No seek complete"}, - {0x03,0x00,D|T|L|W|S|O|B|K,"Peripheral device write fault"}, - {0x03,0x01,T,"No write current"}, - {0x03,0x02,T,"Excessive write errors"}, - {0x04,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,cause not reportable"}, - {0x04,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit is in process of becoming ready"}, - {0x04,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,initializing cmd. required"}, - {0x04,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,manual intervention required"}, - {0x04,0x04,D|T|L|R|O|B,"Logical unit not ready,format in progress"}, - {0x04,0x05,D|T|W|O|M|C|A|B|K,"Logical unit not ready,rebuild in progress"}, - {0x04,0x06,D|T|W|O|M|C|A|B|K,"Logical unit not ready,recalculation in progress"}, - {0x04,0x07,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,operation in progress"}, - {0x04,0x08,R,"Logical unit not ready,long write in progress"}, - {0x04,0x09,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not ready,self-test in progress"}, - {0x05,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit does not respond to selection"}, - {0x06,0x00,D|W|R|O|M|B|K,"No reference position found"}, - {0x07,0x00,D|T|L|W|R|S|O|M|B|K,"Multiple peripheral devices selected"}, - {0x08,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication failure"}, - {0x08,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication time-out"}, - {0x08,0x02,D|T|L|W|R|S|O|M|C|A|E|B|K,"Logical unit communication parity error"}, - {0x08,0x03,D|T|R|O|M|B|K,"Logical unit communication CRC error (Ultra-DMA/32)"}, - {0x08,0x04,D|T|L|P|W|R|S|O|C|K,"Unreachable copy target"}, - {0x09,0x00,D|T|W|R|O|B,"Track following error"}, - {0x09,0x01,W|R|O|K,"Tracking servo failure"}, - {0x09,0x02,W|R|O|K,"Focus servo failure"}, - {0x09,0x03,W|R|O,"Spindle servo failure"}, - {0x09,0x04,D|T|W|R|O|B,"Head select fault"}, - {0x0A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Error log overflow"}, - {0x0B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning"}, - {0x0B,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - specified temperature exceeded"}, - {0x0B,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Warning - enclosure degraded"}, - {0x0C,0x00,T|R|S,"Write error"}, - {0x0C,0x01,K,"Write error - recovered with auto reallocation"}, - {0x0C,0x02,D|W|O|B|K,"Write error - auto reallocation failed"}, - {0x0C,0x03,D|W|O|B|K,"Write error - recommend reassignment"}, - {0x0C,0x04,D|T|W|O|B,"Compression check miscompare error"}, - {0x0C,0x05,D|T|W|O|B,"Data expansion occurred during compression"}, - {0x0C,0x06,D|T|W|O|B,"Block not compressible"}, - {0x0C,0x07,R,"Write error - recovery needed"}, - {0x0C,0x08,R,"Write error - recovery failed"}, - {0x0C,0x09,R,"Write error - loss of streaming"}, - {0x0C,0x0A,R,"Write error - padding blocks added"}, - {0x10,0x00,D|W|O|B|K,"Id CRC or ECC error"}, - {0x11,0x00,D|T|W|R|S|O|B|K,"Unrecovered read error"}, - {0x11,0x01,D|T|W|R|S|O|B|K,"Read retries exhausted"}, - {0x11,0x02,D|T|W|R|S|O|B|K,"Error too long to correct"}, - {0x11,0x03,D|T|W|S|O|B|K,"Multiple read errors"}, - {0x11,0x04,D|W|O|B|K,"Unrecovered read error - auto reallocate failed"}, - {0x11,0x05,W|R|O|B,"L-EC uncorrectable error"}, - {0x11,0x06,W|R|O|B,"CIRC unrecovered error"}, - {0x11,0x07,W|O|B,"Data re-synchronization error"}, - {0x11,0x08,T,"Incomplete block read"}, - {0x11,0x09,T,"No gap found"}, - {0x11,0x0A,D|T|O|B|K,"Miscorrected error"}, - {0x11,0x0B,D|W|O|B|K,"Unrecovered read error - recommend reassignment"}, - {0x11,0x0C,D|W|O|B|K,"Unrecovered read error - recommend rewrite the data"}, - {0x11,0x0D,D|T|W|R|O|B,"De-compression CRC error"}, - {0x11,0x0E,D|T|W|R|O|B,"Cannot decompress using declared algorithm"}, - {0x11,0x0F,R,"Error reading UPC/EAN number"}, - {0x11,0x10,R,"Error reading ISRC number"}, - {0x11,0x11,R,"Read error - loss of streaming"}, - {0x12,0x00,D|W|O|B|K,"Address mark not found for id field"}, - {0x13,0x00,D|W|O|B|K,"Address mark not found for data field"}, - {0x14,0x00,D|T|L|W|R|S|O|B|K,"Recorded entity not found"}, - {0x14,0x01,D|T|W|R|O|B|K,"Record not found"}, - {0x14,0x02,T,"Filemark or setmark not found"}, - {0x14,0x03,T,"End-of-data not found"}, - {0x14,0x04,T,"Block sequence error"}, - {0x14,0x05,D|T|W|O|B|K,"Record not found - recommend reassignment"}, - {0x14,0x06,D|T|W|O|B|K,"Record not found - data auto-reallocated"}, - {0x15,0x00,D|T|L|W|R|S|O|M|B|K,"Random positioning error"}, - {0x15,0x01,D|T|L|W|R|S|O|M|B|K,"Mechanical positioning error"}, - {0x15,0x02,D|T|W|R|O|B|K,"Positioning error detected by read of medium"}, - {0x16,0x00,D|W|O|B|K,"Data synchronization mark error"}, - {0x16,0x01,D|W|O|B|K,"Data sync error - data rewritten"}, - {0x16,0x02,D|W|O|B|K,"Data sync error - recommend rewrite"}, - {0x16,0x03,D|W|O|B|K,"Data sync error - data auto-reallocated"}, - {0x16,0x04,D|W|O|B|K,"Data sync error - recommend reassignment"}, - {0x17,0x00,D|T|W|R|S|O|B|K,"Recovered data with no error correction applied"}, - {0x17,0x01,D|T|W|R|S|O|B|K,"Recovered data with retries"}, - {0x17,0x02,D|T|W|R|O|B|K,"Recovered data with positive head offset"}, - {0x17,0x03,D|T|W|R|O|B|K,"Recovered data with negative head offset"}, - {0x17,0x04,W|R|O|B,"Recovered data with retries and/or circ applied"}, - {0x17,0x05,D|W|R|O|B|K,"Recovered data using previous sector id"}, - {0x17,0x06,D|W|O|B|K,"Recovered data without ecc - data auto-reallocated"}, - {0x17,0x07,D|W|R|O|B|K,"Recovered data without ecc - recommend reassignment"}, - {0x17,0x08,D|W|R|O|B|K,"Recovered data without ecc - recommend rewrite"}, - {0x17,0x09,D|W|R|O|B|K,"Recovered data without ecc - data rewritten"}, - {0x18,0x00,D|T|W|R|O|B|K,"Recovered data with error correction applied"}, - {0x18,0x01,D|W|R|O|B|K,"Recovered data with error corr. & retries applied"}, - {0x18,0x02,D|W|R|O|B|K,"Recovered data - data auto-reallocated"}, - {0x18,0x03,R,"Recovered data with CIRC"}, - {0x18,0x04,R,"Recovered data with L-EC"}, - {0x18,0x05,D|W|R|O|B|K,"Recovered data - recommend reassignment"}, - {0x18,0x06,D|W|R|O|B|K,"Recovered data - recommend rewrite"}, - {0x18,0x07,D|W|O|B|K,"Recovered data with ecc - data rewritten"}, - {0x19,0x00,D|O|K,"Defect list error"}, - {0x19,0x01,D|O|K,"Defect list not available"}, - {0x19,0x02,D|O|K,"Defect list error in primary list"}, - {0x19,0x03,D|O|K,"Defect list error in grown list"}, - {0x1A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter list length error"}, - {0x1B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Synchronous data transfer error"}, - {0x1C,0x00,D|O|B|K,"Defect list not found"}, - {0x1C,0x01,D|O|B|K,"Primary defect list not found"}, - {0x1C,0x02,D|O|B|K,"Grown defect list not found"}, - {0x1D,0x00,D|T|W|R|O|B|K,"Miscompare during verify operation"}, - {0x1E,0x00,D|W|O|B|K,"Recovered id with ecc correction"}, - {0x1F,0x00,D|O|K,"Partial defect list transfer"}, - {0x20,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid command operation code"}, - {0x21,0x00,D|T|W|R|O|M|B|K,"Logical block address out of range"}, - {0x21,0x01,D|T|W|R|O|M|B|K,"Invalid element address"}, - {0x22,0x00,D,"Illegal function (use 20 00,24 00,or 26 00)"}, - {0x24,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in cdb"}, - {0x24,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"CDB decryption error"}, - {0x25,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit not supported"}, - {0x26,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid field in parameter list"}, - {0x26,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter not supported"}, - {0x26,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Parameter value invalid"}, - {0x26,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Threshold parameters not supported"}, - {0x26,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid release of persistent reservation"}, - {0x26,0x05,D|T|L|P|W|R|S|O|M|C|A|B|K,"Data decryption error"}, - {0x26,0x06,D|T|L|P|W|R|S|O|C|K,"Too many target descriptors"}, - {0x26,0x07,D|T|L|P|W|R|S|O|C|K,"Unsupported target descriptor type code"}, - {0x26,0x08,D|T|L|P|W|R|S|O|C|K,"Too many segment descriptors"}, - {0x26,0x09,D|T|L|P|W|R|S|O|C|K,"Unsupported segment descriptor type code"}, - {0x26,0x0A,D|T|L|P|W|R|S|O|C|K,"Unexpected inexact segment"}, - {0x26,0x0B,D|T|L|P|W|R|S|O|C|K,"Inline data length exceeded"}, - {0x26,0x0C,D|T|L|P|W|R|S|O|C|K,"Invalid operation for copy source or destination"}, - {0x26,0x0D,D|T|L|P|W|R|S|O|C|K,"Copy segment granularity violation"}, - {0x27,0x00,D|T|W|R|O|B|K,"Write protected"}, - {0x27,0x01,D|T|W|R|O|B|K,"Hardware write protected"}, - {0x27,0x02,D|T|W|R|O|B|K,"Logical unit software write protected"}, - {0x27,0x03,T|R,"Associated write protect"}, - {0x27,0x04,T|R,"Persistent write protect"}, - {0x27,0x05,T|R,"Permanent write protect"}, - {0x28,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Not ready to ready change,medium may have changed"}, - {0x28,0x01,D|T|W|R|O|M|B,"Import or export element accessed"}, - {0x29,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on,reset,or bus device reset occurred"}, - {0x29,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Power on occurred"}, - {0x29,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi bus reset occurred"}, - {0x29,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Bus device reset function occurred"}, - {0x29,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Device internal reset"}, - {0x29,0x05,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to single-ended"}, - {0x29,0x06,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Transceiver mode changed to lvd"}, - {0x2A,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Parameters changed"}, - {0x2A,0x01,D|T|L|W|R|S|O|M|C|A|E|B|K,"Mode parameters changed"}, - {0x2A,0x02,D|T|L|W|R|S|O|M|C|A|E|K,"Log parameters changed"}, - {0x2A,0x03,D|T|L|P|W|R|S|O|M|C|A|E|K,"Reservations preempted"}, - {0x2A,0x04,D|T|L|P|W|R|S|O|M|C|A|E,"Reservations released"}, - {0x2A,0x05,D|T|L|P|W|R|S|O|M|C|A|E,"Registrations preempted"}, - {0x2B,0x00,D|T|L|P|W|R|S|O|C|K,"Copy cannot execute since host cannot disconnect"}, - {0x2C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command sequence error"}, - {0x2C,0x01,S,"Too many windows specified"}, - {0x2C,0x02,S,"Invalid combination of windows specified"}, - {0x2C,0x03,R,"Current program area is not empty"}, - {0x2C,0x04,R,"Current program area is empty"}, - {0x2C,0x05,B,"Illegal power condition request"}, - {0x2D,0x00,T,"Overwrite error on update in place"}, - {0x2F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Commands cleared by another initiator"}, - {0x30,0x00,D|T|W|R|O|M|B|K,"Incompatible medium installed"}, - {0x30,0x01,D|T|W|R|O|B|K,"Cannot read medium - unknown format"}, - {0x30,0x02,D|T|W|R|O|B|K,"Cannot read medium - incompatible format"}, - {0x30,0x03,D|T|R|K,"Cleaning cartridge installed"}, - {0x30,0x04,D|T|W|R|O|B|K,"Cannot write medium - unknown format"}, - {0x30,0x05,D|T|W|R|O|B|K,"Cannot write medium - incompatible format"}, - {0x30,0x06,D|T|W|R|O|B,"Cannot format medium - incompatible medium"}, - {0x30,0x07,D|T|L|W|R|S|O|M|A|E|B|K,"Cleaning failure"}, - {0x30,0x08,R,"Cannot write - application code mismatch"}, - {0x30,0x09,R,"Current session not fixated for append"}, - {0x31,0x00,D|T|W|R|O|B|K,"Medium format corrupted"}, - {0x31,0x01,D|L|R|O|B,"Format command failed"}, - {0x32,0x00,D|W|O|B|K,"No defect spare location available"}, - {0x32,0x01,D|W|O|B|K,"Defect list update failure"}, - {0x33,0x00,T,"Tape length error"}, - {0x34,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure failure"}, - {0x35,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services failure"}, - {0x35,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Unsupported enclosure function"}, - {0x35,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services unavailable"}, - {0x35,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer failure"}, - {0x35,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Enclosure services transfer refused"}, - {0x36,0x00,L,"Ribbon,ink,or toner failure"}, - {0x37,0x00,D|T|L|W|R|S|O|M|C|A|E|B|K,"Rounded parameter"}, - {0x38,0x00,B,"Event status notification"}, - {0x38,0x02,B,"Esn - power management class event"}, - {0x38,0x04,B,"Esn - media class event"}, - {0x38,0x06,B,"Esn - device busy class event"}, - {0x39,0x00,D|T|L|W|R|S|O|M|C|A|E|K,"Saving parameters not supported"}, - {0x3A,0x00,D|T|L|W|R|S|O|M|B|K,"Medium not present"}, - {0x3A,0x01,D|T|W|R|O|M|B|K,"Medium not present - tray closed"}, - {0x3A,0x02,D|T|W|R|O|M|B|K,"Medium not present - tray open"}, - {0x3A,0x03,D|T|W|R|O|M|B,"Medium not present - loadable"}, - {0x3A,0x04,D|T|W|R|O|M|B,"Medium not present - medium auxiliary memory accessible"}, - {0x3B,0x00,T|L,"Sequential positioning error"}, - {0x3B,0x01,T,"Tape position error at beginning-of-medium"}, - {0x3B,0x02,T,"Tape position error at end-of-medium"}, - {0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"}, - {0x3B,0x04,L,"Slew failure"}, - {0x3B,0x05,L,"Paper jam"}, - {0x3B,0x06,L,"Failed to sense top-of-form"}, - {0x3B,0x07,L,"Failed to sense bottom-of-form"}, - {0x3B,0x08,T,"Reposition error"}, - {0x3B,0x09,S,"Read past end of medium"}, - {0x3B,0x0A,S,"Read past beginning of medium"}, - {0x3B,0x0B,S,"Position past end of medium"}, - {0x3B,0x0C,T|S,"Position past beginning of medium"}, - {0x3B,0x0D,D|T|W|R|O|M|B|K,"Medium destination element full"}, - {0x3B,0x0E,D|T|W|R|O|M|B|K,"Medium source element empty"}, - {0x3B,0x0F,R,"End of medium reached"}, - {0x3B,0x11,D|T|W|R|O|M|B|K,"Medium magazine not accessible"}, - {0x3B,0x12,D|T|W|R|O|M|B|K,"Medium magazine removed"}, - {0x3B,0x13,D|T|W|R|O|M|B|K,"Medium magazine inserted"}, - {0x3B,0x14,D|T|W|R|O|M|B|K,"Medium magazine locked"}, - {0x3B,0x15,D|T|W|R|O|M|B|K,"Medium magazine unlocked"}, - {0x3B,0x16,R,"Mechanical positioning or changer error"}, - {0x3D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|K,"Invalid bits in identify message"}, - {0x3E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit has not self-configured yet"}, - {0x3E,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failure"}, - {0x3E,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Timeout on logical unit"}, - {0x3E,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-test"}, - {0x3E,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit unable to update self-test log"}, - {0x3F,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Target operating conditions have changed"}, - {0x3F,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Microcode has been changed"}, - {0x3F,0x02,D|T|L|P|W|R|S|O|M|C|B|K,"Changed operating definition"}, - {0x3F,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Inquiry data has changed"}, - {0x3F,0x04,D|T|W|R|O|M|C|A|E|B|K,"Component device attached"}, - {0x3F,0x05,D|T|W|R|O|M|C|A|E|B|K,"Device identifier changed"}, - {0x3F,0x06,D|T|W|R|O|M|C|A|E|B,"Redundancy group created or modified"}, - {0x3F,0x07,D|T|W|R|O|M|C|A|E|B,"Redundancy group deleted"}, - {0x3F,0x08,D|T|W|R|O|M|C|A|E|B,"Spare created or modified"}, - {0x3F,0x09,D|T|W|R|O|M|C|A|E|B,"Spare deleted"}, - {0x3F,0x0A,D|T|W|R|O|M|C|A|E|B|K,"Volume set created or modified"}, - {0x3F,0x0B,D|T|W|R|O|M|C|A|E|B|K,"Volume set deleted"}, - {0x3F,0x0C,D|T|W|R|O|M|C|A|E|B|K,"Volume set deassigned"}, - {0x3F,0x0D,D|T|W|R|O|M|C|A|E|B|K,"Volume set reassigned"}, - {0x3F,0x0E,D|T|L|P|W|R|S|O|M|C|A|E,"Reported luns data has changed"}, - {0x3F,0x10,D|T|W|R|O|M|B,"Medium loadable"}, - {0x3F,0x11,D|T|W|R|O|M|B,"Medium auxiliary memory accessible"}, - {0x40,0x00,D,"Ram failure (should use 40 nn)"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x40,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Diagnostic failure on component nn (80h-ffh)"}, - {0x41,0x00,D,"Data path failure (should use 40 nn)"}, - {0x42,0x00,D,"Power-on or self-test failure (should use 40 nn)"}, - {0x43,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Message error"}, - {0x44,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Internal target failure"}, - {0x45,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Select or reselect failure"}, - {0x46,0x00,D|T|L|P|W|R|S|O|M|C|B|K,"Unsuccessful soft reset"}, - {0x47,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error"}, - {0x47,0x01,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase CRC error detected"}, - {0x47,0x02,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Scsi parity error detected during st data phase"}, - {0x47,0x03,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Information unit CRC error detected"}, - {0x47,0x04,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Asynchronous information protection error detected"}, - {0x48,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Initiator detected error message received"}, - {0x49,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Invalid message error"}, - {0x4A,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Command phase error"}, - {0x4B,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Data phase error"}, - {0x4C,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Logical unit failed self-configuration"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x4D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Tagged overlapped commands (nn = queue tag)"}, - {0x4E,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Overlapped commands attempted"}, - {0x50,0x00,T,"Write append error"}, - {0x50,0x01,T,"Write append position error"}, - {0x50,0x02,T,"Position error related to timing"}, - {0x51,0x00,T|R|O,"Erase failure"}, - {0x52,0x00,T,"Cartridge fault"}, - {0x53,0x00,D|T|L|W|R|S|O|M|B|K,"Media load or eject failed"}, - {0x53,0x01,T,"Unload tape failure"}, - {0x53,0x02,D|T|W|R|O|M|B|K,"Medium removal prevented"}, - {0x54,0x00,P,"Scsi to host system interface failure"}, - {0x55,0x00,P,"System resource failure"}, - {0x55,0x01,D|O|B|K,"System buffer full"}, - {0x55,0x02,D|T|L|P|W|R|S|O|M|A|E|K,"Insufficient reservation resources"}, - {0x55,0x03,D|T|L|P|W|R|S|O|M|C|A|E,"Insufficient resources"}, - {0x55,0x04,D|T|L|P|W|R|S|O|M|A|E,"Insufficient registration resources"}, - {0x57,0x00,R,"Unable to recover table-of-contents"}, - {0x58,0x00,O,"Generation does not exist"}, - {0x59,0x00,O,"Updated block read"}, - {0x5A,0x00,D|T|L|P|W|R|S|O|M|B|K,"Operator request or state change input"}, - {0x5A,0x01,D|T|W|R|O|M|B|K,"Operator medium removal request"}, - {0x5A,0x02,D|T|W|R|O|A|B|K,"Operator selected write protect"}, - {0x5A,0x03,D|T|W|R|O|A|B|K,"Operator selected write permit"}, - {0x5B,0x00,D|T|L|P|W|R|S|O|M|K,"Log exception"}, - {0x5B,0x01,D|T|L|P|W|R|S|O|M|K,"Threshold condition met"}, - {0x5B,0x02,D|T|L|P|W|R|S|O|M|K,"Log counter at maximum"}, - {0x5B,0x03,D|T|L|P|W|R|S|O|M|K,"Log list codes exhausted"}, - {0x5C,0x00,D|O,"Rpl status change"}, - {0x5C,0x01,D|O,"Spindles synchronized"}, - {0x5C,0x02,D|O,"Spindles not synchronized"}, - {0x5D,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded"}, - {0x5D,0x01,R|B,"Media failure prediction threshold exceeded"}, - {0x5D,0x02,R,"Logical unit failure prediction threshold exceeded"}, - {0x5D,0x10,D|B,"Hardware impending failure general hard drive failure"}, - {0x5D,0x11,D|B,"Hardware impending failure drive error rate too high"}, - {0x5D,0x12,D|B,"Hardware impending failure data error rate too high"}, - {0x5D,0x13,D|B,"Hardware impending failure seek error rate too high"}, - {0x5D,0x14,D|B,"Hardware impending failure too many block reassigns"}, - {0x5D,0x15,D|B,"Hardware impending failure access times too high"}, - {0x5D,0x16,D|B,"Hardware impending failure start unit times too high"}, - {0x5D,0x17,D|B,"Hardware impending failure channel parametrics"}, - {0x5D,0x18,D|B,"Hardware impending failure controller detected"}, - {0x5D,0x19,D|B,"Hardware impending failure throughput performance"}, - {0x5D,0x1A,D|B,"Hardware impending failure seek time performance"}, - {0x5D,0x1B,D|B,"Hardware impending failure spin-up retry count"}, - {0x5D,0x1C,D|B,"Hardware impending failure drive calibration retry count"}, - {0x5D,0x20,D|B,"Controller impending failure general hard drive failure"}, - {0x5D,0x21,D|B,"Controller impending failure drive error rate too high"}, - {0x5D,0x22,D|B,"Controller impending failure data error rate too high"}, - {0x5D,0x23,D|B,"Controller impending failure seek error rate too high"}, - {0x5D,0x24,D|B,"Controller impending failure too many block reassigns"}, - {0x5D,0x25,D|B,"Controller impending failure access times too high"}, - {0x5D,0x26,D|B,"Controller impending failure start unit times too high"}, - {0x5D,0x27,D|B,"Controller impending failure channel parametrics"}, - {0x5D,0x28,D|B,"Controller impending failure controller detected"}, - {0x5D,0x29,D|B,"Controller impending failure throughput performance"}, - {0x5D,0x2A,D|B,"Controller impending failure seek time performance"}, - {0x5D,0x2B,D|B,"Controller impending failure spin-up retry count"}, - {0x5D,0x2C,D|B,"Controller impending failure drive calibration retry count"}, - {0x5D,0x30,D|B,"Data channel impending failure general hard drive failure"}, - {0x5D,0x31,D|B,"Data channel impending failure drive error rate too high"}, - {0x5D,0x32,D|B,"Data channel impending failure data error rate too high"}, - {0x5D,0x33,D|B,"Data channel impending failure seek error rate too high"}, - {0x5D,0x34,D|B,"Data channel impending failure too many block reassigns"}, - {0x5D,0x35,D|B,"Data channel impending failure access times too high"}, - {0x5D,0x36,D|B,"Data channel impending failure start unit times too high"}, - {0x5D,0x37,D|B,"Data channel impending failure channel parametrics"}, - {0x5D,0x38,D|B,"Data channel impending failure controller detected"}, - {0x5D,0x39,D|B,"Data channel impending failure throughput performance"}, - {0x5D,0x3A,D|B,"Data channel impending failure seek time performance"}, - {0x5D,0x3B,D|B,"Data channel impending failure spin-up retry count"}, - {0x5D,0x3C,D|B,"Data channel impending failure drive calibration retry count"}, - {0x5D,0x40,D|B,"Servo impending failure general hard drive failure"}, - {0x5D,0x41,D|B,"Servo impending failure drive error rate too high"}, - {0x5D,0x42,D|B,"Servo impending failure data error rate too high"}, - {0x5D,0x43,D|B,"Servo impending failure seek error rate too high"}, - {0x5D,0x44,D|B,"Servo impending failure too many block reassigns"}, - {0x5D,0x45,D|B,"Servo impending failure access times too high"}, - {0x5D,0x46,D|B,"Servo impending failure start unit times too high"}, - {0x5D,0x47,D|B,"Servo impending failure channel parametrics"}, - {0x5D,0x48,D|B,"Servo impending failure controller detected"}, - {0x5D,0x49,D|B,"Servo impending failure throughput performance"}, - {0x5D,0x4A,D|B,"Servo impending failure seek time performance"}, - {0x5D,0x4B,D|B,"Servo impending failure spin-up retry count"}, - {0x5D,0x4C,D|B,"Servo impending failure drive calibration retry count"}, - {0x5D,0x50,D|B,"Spindle impending failure general hard drive failure"}, - {0x5D,0x51,D|B,"Spindle impending failure drive error rate too high"}, - {0x5D,0x52,D|B,"Spindle impending failure data error rate too high"}, - {0x5D,0x53,D|B,"Spindle impending failure seek error rate too high"}, - {0x5D,0x54,D|B,"Spindle impending failure too many block reassigns"}, - {0x5D,0x55,D|B,"Spindle impending failure access times too high"}, - {0x5D,0x56,D|B,"Spindle impending failure start unit times too high"}, - {0x5D,0x57,D|B,"Spindle impending failure channel parametrics"}, - {0x5D,0x58,D|B,"Spindle impending failure controller detected"}, - {0x5D,0x59,D|B,"Spindle impending failure throughput performance"}, - {0x5D,0x5A,D|B,"Spindle impending failure seek time performance"}, - {0x5D,0x5B,D|B,"Spindle impending failure spin-up retry count"}, - {0x5D,0x5C,D|B,"Spindle impending failure drive calibration retry count"}, - {0x5D,0x60,D|B,"Firmware impending failure general hard drive failure"}, - {0x5D,0x61,D|B,"Firmware impending failure drive error rate too high"}, - {0x5D,0x62,D|B,"Firmware impending failure data error rate too high"}, - {0x5D,0x63,D|B,"Firmware impending failure seek error rate too high"}, - {0x5D,0x64,D|B,"Firmware impending failure too many block reassigns"}, - {0x5D,0x65,D|B,"Firmware impending failure access times too high"}, - {0x5D,0x66,D|B,"Firmware impending failure start unit times too high"}, - {0x5D,0x67,D|B,"Firmware impending failure channel parametrics"}, - {0x5D,0x68,D|B,"Firmware impending failure controller detected"}, - {0x5D,0x69,D|B,"Firmware impending failure throughput performance"}, - {0x5D,0x6A,D|B,"Firmware impending failure seek time performance"}, - {0x5D,0x6B,D|B,"Firmware impending failure spin-up retry count"}, - {0x5D,0x6C,D|B,"Firmware impending failure drive calibration retry count"}, - {0x5D,0xFF,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Failure prediction threshold exceeded (false)"}, - {0x5E,0x00,D|T|L|P|W|R|S|O|C|A|K,"Low power condition on"}, - {0x5E,0x01,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by timer"}, - {0x5E,0x02,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by timer"}, - {0x5E,0x03,D|T|L|P|W|R|S|O|C|A|K,"Idle condition activated by command"}, - {0x5E,0x04,D|T|L|P|W|R|S|O|C|A|K,"Standby condition activated by command"}, - {0x5E,0x41,B,"Power state change to active"}, - {0x5E,0x42,B,"Power state change to idle"}, - {0x5E,0x43,B,"Power state change to standby"}, - {0x5E,0x45,B,"Power state change to sleep"}, - {0x5E,0x47,B|K,"Power state change to device control"}, - {0x60,0x00,S,"Lamp failure"}, - {0x61,0x00,S,"Video acquisition error"}, - {0x61,0x01,S,"Unable to acquire video"}, - {0x61,0x02,S,"Out of focus"}, - {0x62,0x00,S,"Scan head positioning error"}, - {0x63,0x00,R,"End of user area encountered on this track"}, - {0x63,0x01,R,"Packet does not fit in available space"}, - {0x64,0x00,R,"Illegal mode for this track"}, - {0x64,0x01,R,"Invalid packet size"}, - {0x65,0x00,D|T|L|P|W|R|S|O|M|C|A|E|B|K,"Voltage fault"}, - {0x66,0x00,S,"Automatic document feeder cover up"}, - {0x66,0x01,S,"Automatic document feeder lift up"}, - {0x66,0x02,S,"Document jam in automatic document feeder"}, - {0x66,0x03,S,"Document miss feed automatic in document feeder"}, - {0x67,0x00,A,"Configuration failure"}, - {0x67,0x01,A,"Configuration of incapable logical units failed"}, - {0x67,0x02,A,"Add logical unit failed"}, - {0x67,0x03,A,"Modification of logical unit failed"}, - {0x67,0x04,A,"Exchange of logical unit failed"}, - {0x67,0x05,A,"Remove of logical unit failed"}, - {0x67,0x06,A,"Attachment of logical unit failed"}, - {0x67,0x07,A,"Creation of logical unit failed"}, - {0x67,0x08,A,"Assign failure occurred"}, - {0x67,0x09,A,"Multiply assigned logical unit"}, - {0x68,0x00,A,"Logical unit not configured"}, - {0x69,0x00,A,"Data loss on logical unit"}, - {0x69,0x01,A,"Multiple logical unit failures"}, - {0x69,0x02,A,"Parity/data mismatch"}, - {0x6A,0x00,A,"Informational,refer to log"}, - {0x6B,0x00,A,"State change has occurred"}, - {0x6B,0x01,A,"Redundancy level got better"}, - {0x6B,0x02,A,"Redundancy level got worse"}, - {0x6C,0x00,A,"Rebuild failure occurred"}, - {0x6D,0x00,A,"Recalculate failure occurred"}, - {0x6E,0x00,A,"Command to logical unit failed"}, - {0x6F,0x00,R,"Copy protection key exchange failure - authentication failure"}, - {0x6F,0x01,R,"Copy protection key exchange failure - key not present"}, - {0x6F,0x02,R,"Copy protection key exchange failure - key not established"}, - {0x6F,0x03,R,"Read of scrambled sector without authentication"}, - {0x6F,0x04,R,"Media region code is mismatched to logical unit region"}, - {0x6F,0x05,R,"Drive region must be permanent/region reset count error"}, - /* - * FIXME(eric) - need a way to represent wildcards here. - */ - {0x70,0x00,T,"Decompression exception short algorithm id of nn"}, - {0x71,0x00,T,"Decompression exception long algorithm id"}, - {0x72,0x00,R,"Session fixation error"}, - {0x72,0x01,R,"Session fixation error writing lead-in"}, - {0x72,0x02,R,"Session fixation error writing lead-out"}, - {0x72,0x03,R,"Session fixation error - incomplete track in session"}, - {0x72,0x04,R,"Empty or partially written reserved track"}, - {0x72,0x05,R,"No more track reservations allowed"}, - {0x73,0x00,R,"Cd control error"}, - {0x73,0x01,R,"Power calibration area almost full"}, - {0x73,0x02,R,"Power calibration area is full"}, - {0x73,0x03,R,"Power calibration area error"}, - {0x73,0x04,R,"Program memory area update failure"}, - {0x73,0x05,R,"Program memory area is full"}, - {0x73,0x06,R,"RMA/PMA is full"}, - {0, 0, 0, NULL} + {0x40,0x00,0x7f,"Ram failure (%x)"}, + {0x40,0x80,0xff,"Diagnostic failure on component (%x)"}, + {0x41,0x00,0xff,"Data path failure (%x)"}, + {0x42,0x00,0xff,"Power-on or self-test failure (%x)"}, + {0x4D,0x00,0xff,"Tagged overlapped commands (queue tag %x)"}, + {0x70,0x00,0xff,"Decompression exception short algorithm id of %x"}, + {0, 0, 0, NULL} }; #endif #if (CONSTANTS & CONST_SENSE) +/* description of the sense key values */ static const char *snstext[] = { - "None", /* There is no sense information */ - "Recovered Error", /* The last command completed successfully - but used error correction */ - "Not Ready", /* The addressed target is not ready */ - "Medium Error", /* Data error detected on the medium */ - "Hardware Error", /* Controller or device failure */ - "Illegal Request", - "Unit Attention", /* Removable medium was changed, or - the target has been reset */ - "Data Protect", /* Access to the data is blocked */ - "Blank Check", /* Reached unexpected written or unwritten - region of the medium */ - "Key=9", /* Vendor specific */ - "Copy Aborted", /* COPY or COMPARE was aborted */ - "Aborted Command", /* The target aborted the command */ - "Equal", /* A SEARCH DATA command found data equal */ - "Volume Overflow", /* Medium full with still data to be written */ - "Miscompare", /* Source data and data on the medium - do not agree */ - "Key=15" /* Reserved */ + "No Sense", /* 0: There is no sense information */ + "Recovered Error", /* 1: The last command completed successfully + but used error correction */ + "Not Ready", /* 2: The addressed target is not ready */ + "Medium Error", /* 3: Data error detected on the medium */ + "Hardware Error", /* 4: Controller or device failure */ + "Illegal Request", /* 5: Error in request */ + "Unit Attention", /* 6: Removable medium was changed, or + the target has been reset */ + "Data Protect", /* 7: Access to the data is blocked */ + "Blank Check", /* 8: Reached unexpected written or unwritten + region of the medium */ + "Vendor Specific", /* 9: Vendor specific */ + "Copy Aborted", /* A: COPY or COMPARE was aborted */ + "Aborted Command", /* B: The target aborted the command */ + "Equal", /* C: A SEARCH DATA command found data equal */ + "Volume Overflow", /* D: Medium full with still data to be written */ + "Miscompare", /* E: Source data and data on the medium + do not agree */ }; #endif -/* Print sense information */ -static -void print_sense_internal(const char * devclass, - const unsigned char * sense_buffer, - kdev_t dev) -{ - int i, s; - int sense_class, valid, code, info; - const char * error = NULL; - - sense_class = (sense_buffer[0] >> 4) & 0x07; - code = sense_buffer[0] & 0xf; - valid = sense_buffer[0] & 0x80; - - if (sense_class == 7) { /* extended sense data */ - s = sense_buffer[7] + 8; - if(s > SCSI_SENSE_BUFFERSIZE) - s = SCSI_SENSE_BUFFERSIZE; - - info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | - (sense_buffer[5] << 8) | sense_buffer[6]); - if (info || valid) { - printk("Info fld=0x%x", info); - if (!valid) /* info data not according to standard */ - printk(" (nonstd)"); - printk(", "); - } - if (sense_buffer[2] & 0x80) - printk( "FMK "); /* current command has read a filemark */ - if (sense_buffer[2] & 0x40) - printk( "EOM "); /* end-of-medium condition exists */ - if (sense_buffer[2] & 0x20) - printk( "ILI "); /* incorrect block length requested */ - - switch (code) { - case 0x0: - error = "Current"; /* error concerns current command */ - break; - case 0x1: - error = "Deferred"; /* error concerns some earlier command */ - /* e.g., an earlier write to disk cache succeeded, but - now the disk discovers that it cannot write the data */ - break; - default: - error = "Invalid"; - } - - printk("%s ", error); - +/* Get sense key string or NULL if not available */ +const char * +scsi_sense_key_string(unsigned char key) { #if (CONSTANTS & CONST_SENSE) - printk( "%s%s: sense key %s\n", devclass, - kdevname(dev), snstext[sense_buffer[2] & 0x0f]); -#else - printk("%s%s: sns = %2x %2x\n", devclass, - kdevname(dev), sense_buffer[0], sense_buffer[2]); + if (key <= 0xE) + return snstext[key]; #endif - - /* Check to see if additional sense information is available */ - if(sense_buffer[7] + 7 < 13 || - (sense_buffer[12] == 0 && sense_buffer[13] == 0)) goto done; - + return NULL; +} + +/* + * Get extended sense key string or NULL if not available. + * This string may contain a %x and must be printed with ascq as arg. + */ +const char * +scsi_extd_sense_format(unsigned char asc, unsigned char ascq) { #if (CONSTANTS & CONST_XSENSE) - for(i=0; additional[i].text; i++) - if(additional[i].code1 == sense_buffer[12] && - additional[i].code2 == sense_buffer[13]) - printk("Additional sense indicates %s\n", additional[i].text); - - for(i=0; additional2[i].text; i++) - if(additional2[i].code1 == sense_buffer[12] && - additional2[i].code2_min >= sense_buffer[13] && - additional2[i].code2_max <= sense_buffer[13]) { - printk("Additional sense indicates "); - printk(additional2[i].text, sense_buffer[13]); - printk("\n"); - }; -#else - printk("ASC=%2x ASCQ=%2x\n", sense_buffer[12], sense_buffer[13]); + int i; + unsigned short code = ((asc << 8) | ascq); + + for (i=0; additional[i].text; i++) + if (additional[i].code12 == code) + return additional[i].text; + for (i=0; additional2[i].fmt; i++) + if (additional2[i].code1 == asc && + additional2[i].code2_min >= ascq && + additional2[i].code2_max <= ascq) + return additional2[i].fmt; #endif - } else { /* non-extended sense data */ + return NULL; +} + +/* Print extended sense information */ +static void +scsi_show_extd_sense(unsigned char asc, unsigned char ascq) { + const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq); + + if (extd_sense_fmt) { + printk("Additional sense: "); + printk(extd_sense_fmt, ascq); + printk("\n"); + } else { + printk("ASC=%2x ASCQ=%2x\n", asc, ascq); + } +} - /* - * Standard says: - * sense_buffer[0] & 0200 : address valid - * sense_buffer[0] & 0177 : vendor-specific error code - * sense_buffer[1] & 0340 : vendor-specific - * sense_buffer[1..3] : 21-bit logical block address - */ +/* Print sense information */ +static void +print_sense_internal(const char * devclass, + const unsigned char * sense_buffer, + kdev_t dev) +{ + int s, sense_class, valid, code, info; + const char * error = NULL; + unsigned char asc, ascq; + const char *sense_txt; + + sense_class = (sense_buffer[0] >> 4) & 0x07; + code = sense_buffer[0] & 0xf; + valid = sense_buffer[0] & 0x80; + + if (sense_class == 7) { /* extended sense data */ + s = sense_buffer[7] + 8; + if (s > SCSI_SENSE_BUFFERSIZE) + s = SCSI_SENSE_BUFFERSIZE; -#if (CONSTANTS & CONST_SENSE) - if (sense_buffer[0] < 15) - printk("%s%s: old sense key %s\n", devclass, - kdevname(dev), snstext[sense_buffer[0] & 0x0f]); - else -#endif - printk("%s%s: sns = %2x %2x\n", devclass, - kdevname(dev), sense_buffer[0], sense_buffer[2]); + info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) | + (sense_buffer[5] << 8) | sense_buffer[6]); + if (info || valid) { + printk("Info fld=0x%x", info); + if (!valid) /* info data not according to standard */ + printk(" (nonstd)"); + printk(", "); + } + if (sense_buffer[2] & 0x80) + printk( "FMK "); /* current command has read a filemark */ + if (sense_buffer[2] & 0x40) + printk( "EOM "); /* end-of-medium condition exists */ + if (sense_buffer[2] & 0x20) + printk( "ILI "); /* incorrect block length requested */ - printk("Non-extended sense class %d code 0x%0x\n", sense_class, code); - s = 4; - } + switch (code) { + case 0x0: + error = "Current"; /* error concerns current command */ + break; + case 0x1: + error = "Deferred"; /* error concerns some earlier command */ + /* e.g., an earlier write to disk cache succeeded, but + now the disk discovers that it cannot write the data */ + break; + default: + error = "Invalid"; + } + + printk("%s ", error); + + sense_txt = scsi_sense_key_string(sense_buffer[2]); + if (sense_txt) + printk("%s%s: sense key %s\n", + devclass, kdevname(dev), sense_txt); + else + printk("%s%s: sense = %2x %2x\n", + devclass, kdevname(dev), + sense_buffer[0], sense_buffer[2]); + + asc = ascq = 0; + if (sense_buffer[7] + 7 >= 13) { + asc = sense_buffer[12]; + ascq = sense_buffer[13]; + } + if (asc || ascq) + scsi_show_extd_sense(asc, ascq); + + } else { /* non-extended sense data */ + + /* + * Standard says: + * sense_buffer[0] & 0200 : address valid + * sense_buffer[0] & 0177 : vendor-specific error code + * sense_buffer[1] & 0340 : vendor-specific + * sense_buffer[1..3] : 21-bit logical block address + */ + + sense_txt = scsi_sense_key_string(sense_buffer[0]); + if (sense_txt) + printk("%s%s: old sense key %s\n", + devclass, kdevname(dev), sense_txt); + else + printk("%s%s: sense = %2x %2x\n", + devclass, kdevname(dev), + sense_buffer[0], sense_buffer[2]); + + printk("Non-extended sense class %d code 0x%0x\n", + sense_class, code); + s = 4; + } - done: #if !(CONSTANTS & CONST_SENSE) - printk("Raw sense data:"); - for (i = 0; i < s; ++i) - printk("0x%02x ", sense_buffer[i]); - printk("\n"); + printk("Raw sense data:"); + for (i = 0; i < s; ++i) + printk("0x%02x ", sense_buffer[i]); + printk("\n"); #endif - return; } void print_sense(const char * devclass, Scsi_Cmnd * SCpnt) @@ -983,22 +1179,3 @@ { printk("Driverbyte=0x%02x ",driver_byte(scsiresult)); } #endif - -/* - * Overrides for Emacs so that we almost follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/constants.h linux-2.5.21az/linux/drivers/scsi/constants.h --- linux-2.5.21z/linux/drivers/scsi/constants.h Sun Jun 9 07:28:55 2002 +++ linux-2.5.21az/linux/drivers/scsi/constants.h Thu Jan 1 01:00:00 1970 @@ -1,6 +0,0 @@ -#ifndef _CONSTANTS_H -#define _CONSTANTS_H -extern int print_msg(unsigned char *); -extern void print_status(int); -extern void print_Scsi_Cmnd (Scsi_Cmnd *); -#endif /* def _CONSTANTS_H */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/dmx3191d.c linux-2.5.21az/linux/drivers/scsi/dmx3191d.c --- linux-2.5.21z/linux/drivers/scsi/dmx3191d.c Sun Jun 9 07:30:31 2002 +++ linux-2.5.21az/linux/drivers/scsi/dmx3191d.c Sat Jun 15 13:43:30 2002 @@ -34,7 +34,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "sd.h" #include "dmx3191d.h" diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/dtc.c linux-2.5.21az/linux/drivers/scsi/dtc.c --- linux-2.5.21z/linux/drivers/scsi/dtc.c Sun Jun 9 07:30:57 2002 +++ linux-2.5.21az/linux/drivers/scsi/dtc.c Sat Jun 15 13:43:30 2002 @@ -83,7 +83,6 @@ #include "dtc.h" #define AUTOPROBE_IRQ #include "NCR5380.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/g_NCR5380.c linux-2.5.21az/linux/drivers/scsi/g_NCR5380.c --- linux-2.5.21z/linux/drivers/scsi/g_NCR5380.c Sun Jun 9 07:27:45 2002 +++ linux-2.5.21az/linux/drivers/scsi/g_NCR5380.c Sat Jun 15 13:43:30 2002 @@ -116,7 +116,6 @@ #include "hosts.h" #include "g_NCR5380.h" #include "NCR5380.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/lasi700.c linux-2.5.21az/linux/drivers/scsi/lasi700.c --- linux-2.5.21z/linux/drivers/scsi/lasi700.c Sun Jun 9 07:27:21 2002 +++ linux-2.5.21az/linux/drivers/scsi/lasi700.c Sat Jun 15 13:43:30 2002 @@ -57,7 +57,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "lasi700.h" #include "53c700.h" diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/mac_scsi.c linux-2.5.21az/linux/drivers/scsi/mac_scsi.c --- linux-2.5.21z/linux/drivers/scsi/mac_scsi.c Sun Jun 9 07:27:14 2002 +++ linux-2.5.21az/linux/drivers/scsi/mac_scsi.c Sat Jun 15 13:43:30 2002 @@ -70,7 +70,6 @@ #include "hosts.h" #include "mac_scsi.h" #include "NCR5380.h" -#include "constants.h" #if 0 #define NDEBUG (NDEBUG_INTR | NDEBUG_PSEUDO_DMA | NDEBUG_ARBITRATION | NDEBUG_SELECTION | NDEBUG_RESELECTION) diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/ncr53c8xx.c linux-2.5.21az/linux/drivers/scsi/ncr53c8xx.c --- linux-2.5.21z/linux/drivers/scsi/ncr53c8xx.c Sun Jun 9 07:28:43 2002 +++ linux-2.5.21az/linux/drivers/scsi/ncr53c8xx.c Sat Jun 15 13:43:30 2002 @@ -157,7 +157,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "sd.h" #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/osst.c linux-2.5.21az/linux/drivers/scsi/osst.c --- linux-2.5.21z/linux/drivers/scsi/osst.c Sun Jun 9 07:29:51 2002 +++ linux-2.5.21az/linux/drivers/scsi/osst.c Sat Jun 15 13:43:30 2002 @@ -73,8 +73,6 @@ #include "osst_options.h" #include "osst_detect.h" -#include "constants.h" - static int buffer_kbs = 0; static int write_threshold_kbs = 0; static int max_buffers = 0; diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/pas16.c linux-2.5.21az/linux/drivers/scsi/pas16.c --- linux-2.5.21z/linux/drivers/scsi/pas16.c Sun Jun 9 07:26:32 2002 +++ linux-2.5.21az/linux/drivers/scsi/pas16.c Sat Jun 15 13:43:30 2002 @@ -123,7 +123,6 @@ #include "pas16.h" #define AUTOPROBE_IRQ #include "NCR5380.h" -#include "constants.h" #include "sd.h" #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi.c linux-2.5.21az/linux/drivers/scsi/scsi.c --- linux-2.5.21z/linux/drivers/scsi/scsi.c Sun Jun 9 07:30:07 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi.c Sat Jun 15 13:43:30 2002 @@ -69,7 +69,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #ifdef CONFIG_KMOD #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi.h linux-2.5.21az/linux/drivers/scsi/scsi.h --- linux-2.5.21z/linux/drivers/scsi/scsi.h Sun Jun 9 07:28:14 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi.h Sat Jun 15 13:43:30 2002 @@ -527,24 +527,30 @@ /* * Prototypes for functions in constants.c + * Some of these used to live in constants.h */ +extern void print_Scsi_Cmnd (Scsi_Cmnd *); extern void print_command(unsigned char *); extern void print_sense(const char *, Scsi_Cmnd *); extern void print_req_sense(const char *, Scsi_Request *); extern void print_driverbyte(int scsiresult); extern void print_hostbyte(int scsiresult); -extern void print_status (int status); +extern void print_status(unsigned char status); +extern int print_msg(const unsigned char *); +extern const char *scsi_sense_key_string(unsigned char); +extern const char *scsi_extd_sense_format(unsigned char, unsigned char); /* * The scsi_device struct contains what we know about each given scsi * device. * - * FIXME(eric) - one of the great regrets that I have is that I failed to define - * these structure elements as something like sdev_foo instead of foo. This would - * make it so much easier to grep through sources and so forth. I propose that - * all new elements that get added to these structures follow this convention. - * As time goes on and as people have the stomach for it, it should be possible to - * go back and retrofit at least some of the elements here with with the prefix. + * FIXME(eric) - One of the great regrets that I have is that I failed to + * define these structure elements as something like sdev_foo instead of foo. + * This would make it so much easier to grep through sources and so forth. + * I propose that all new elements that get added to these structures follow + * this convention. As time goes on and as people have the stomach for it, + * it should be possible to go back and retrofit at least some of the elements + * here with with the prefix. */ struct scsi_device { @@ -851,22 +857,3 @@ extern int scsi_reset_provider(Scsi_Device *, int); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_error.c linux-2.5.21az/linux/drivers/scsi/scsi_error.c --- linux-2.5.21z/linux/drivers/scsi/scsi_error.c Sat Jun 15 13:51:33 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_error.c Sat Jun 15 13:43:30 2002 @@ -32,7 +32,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" /* * We must always allow SHUTDOWN_SIGS. Even if we are not a module, @@ -2014,23 +2013,3 @@ return rtn; } - - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 4 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -4 - * c-argdecl-indent: 4 - * c-label-offset: -4 - * c-continued-statement-offset: 4 - * c-continued-brace-offset: 0 - * indent-tabs-mode: nil - * tab-width: 8 - * End: - */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_lib.c linux-2.5.21az/linux/drivers/scsi/scsi_lib.c --- linux-2.5.21z/linux/drivers/scsi/scsi_lib.c Sun Jun 9 07:30:02 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_lib.c Sat Jun 15 13:43:30 2002 @@ -43,7 +43,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include /* diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_merge.c linux-2.5.21az/linux/drivers/scsi/scsi_merge.c --- linux-2.5.21z/linux/drivers/scsi/scsi_merge.c Sun Jun 9 07:31:23 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_merge.c Sat Jun 15 13:43:30 2002 @@ -42,7 +42,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include /* diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_queue.c linux-2.5.21az/linux/drivers/scsi/scsi_queue.c --- linux-2.5.21z/linux/drivers/scsi/scsi_queue.c Sun Jun 9 07:31:22 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_queue.c Sat Jun 15 13:43:30 2002 @@ -34,7 +34,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" /* * TODO: diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_scan.c linux-2.5.21az/linux/drivers/scsi/scsi_scan.c --- linux-2.5.21z/linux/drivers/scsi/scsi_scan.c Sun Jun 9 07:31:17 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_scan.c Sat Jun 15 13:43:30 2002 @@ -16,7 +16,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #ifdef CONFIG_KMOD #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/scsi_syms.c linux-2.5.21az/linux/drivers/scsi/scsi_syms.c --- linux-2.5.21z/linux/drivers/scsi/scsi_syms.c Sun Jun 9 07:30:01 2002 +++ linux-2.5.21az/linux/drivers/scsi/scsi_syms.c Sat Jun 15 15:04:36 2002 @@ -21,7 +21,6 @@ #include "scsi.h" #include #include "hosts.h" -#include "constants.h" #include "sd.h" #include @@ -48,6 +47,8 @@ EXPORT_SYMBOL(print_req_sense); EXPORT_SYMBOL(print_msg); EXPORT_SYMBOL(print_status); +EXPORT_SYMBOL(scsi_sense_key_string); +EXPORT_SYMBOL(scsi_extd_sense_format); EXPORT_SYMBOL(kernel_scsi_ioctl); EXPORT_SYMBOL(scsi_release_command); EXPORT_SYMBOL(print_Scsi_Cmnd); diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/sd.c linux-2.5.21az/linux/drivers/scsi/sd.c --- linux-2.5.21z/linux/drivers/scsi/sd.c Sat Jun 15 13:51:33 2002 +++ linux-2.5.21az/linux/drivers/scsi/sd.c Sat Jun 15 13:43:30 2002 @@ -56,7 +56,6 @@ #include "hosts.h" #include "sd.h" #include -#include "constants.h" #include /* must follow "hosts.h" */ #include @@ -231,7 +230,7 @@ or driver values */ if(host->hostt->bios_param != NULL) - host->hostt->bios_param(sdkp, dev, + host->hostt->bios_param(sdkp, dev, &diskinfo[0]); else scsicam_bios_param(sdkp, dev, &diskinfo[0]); @@ -550,8 +549,7 @@ /* * It is possible that the disk changing stuff resulted in the device * being taken offline. If this is the case, report this to the user, - * and don't pretend that - * the open actually succeeded. + * and don't pretend that the open actually succeeded. */ if (!sdp->online) { goto error_out; @@ -753,6 +751,13 @@ scsi_io_completion(SCpnt, good_sectors, block_sectors); } +static void +sd_set_media_not_present(Scsi_Disk *sdkp) { + sdkp->media_present = 0; + sdkp->capacity = 0; + sdkp->device->changed = 1; +} + /** * check_scsidisk_media_change - self descriptive * @full_dev: kernel device descriptor (kdev_t) @@ -827,13 +832,6 @@ return retval; } -static void -sd_set_media_not_present(Scsi_Disk *sdkp) { - sdkp->media_present = 0; - sdkp->capacity = 0; - sdkp->device->changed = 1; -} - static int sd_media_not_present(Scsi_Disk *sdkp, Scsi_Request *SRpnt) { int the_result = SRpnt->sr_result; @@ -1324,7 +1322,7 @@ } /** - * sd_finish- called during driver initialization, after all + * sd_finish - called during driver initialization, after all * the sd_attach() calls are finished. * * Note: this function is invoked from the scsi mid-level. @@ -1360,7 +1358,7 @@ } /** - * sd_detect- called at the start of driver initialization, once + * sd_detect - called at the start of driver initialization, once * for each scsi device (not just disks) present. * * Returns 0 if not interested in this scsi device (e.g. scanner); @@ -1379,7 +1377,7 @@ } /** - * sd_attach- called during driver initialization and whenever a + * sd_attach - called during driver initialization and whenever a * new scsi device is attached to the system. It is called once * for each scsi device (not just disks) present. * @sdp: pointer to mid level scsi device object @@ -1446,7 +1444,7 @@ } /** - * revalidate_scsidisk- called to flush all partitions and partition + * revalidate_scsidisk - called to flush all partitions and partition * tables for a changed scsi disk. sd_init_onedisk() is then called * followed by re-reading the new partition table. * @dev: kernel device descriptor (kdev_t) @@ -1495,7 +1493,7 @@ } /** - * sd_detach- called whenever a scsi disk (previously recognized by + * sd_detach - called whenever a scsi disk (previously recognized by * sd_attach) is detached from the system. It is called (potentially * multiple times) during sd module unload. * @sdp: pointer to mid level scsi device object @@ -1549,7 +1547,7 @@ } /** - * init_sd- entry point for this driver (both when built in or when + * init_sd - entry point for this driver (both when built in or when * a module). * * Note: this function registers this driver with the scsi mid-level. @@ -1562,14 +1560,13 @@ } /** - * exit_sd- exit point for this driver (when it is a module). + * exit_sd - exit point for this driver (when it is a module). * * Note: this function unregisters this driver from the scsi mid-level. **/ static void __exit exit_sd(void) { int k; - Scsi_Disk * sdkp; SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n")); scsi_unregister_device(&sd_template); @@ -1578,15 +1575,12 @@ sd_registered--; if (sd_dsk_arr != NULL) { - for (k = 0; k < sd_template.dev_max; ++k) { - sdkp = sd_dsk_arr[k]; - if (sdkp) - vfree(sdkp); - } + for (k = 0; k < sd_template.dev_max; ++k) + vfree(sd_dsk_arr[k]); vfree(sd_dsk_arr); } - if (sd_sizes) vfree(sd_sizes); - if (sd) vfree((char *) sd); + vfree(sd_sizes); + vfree((char *) sd); for (k = 0; k < N_USED_SD_MAJORS; k++) { blk_dev[SD_MAJOR(k)].queue = NULL; del_gendisk(&(sd_gendisks[k])); diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/seagate.c linux-2.5.21az/linux/drivers/scsi/seagate.c --- linux-2.5.21z/linux/drivers/scsi/seagate.c Sun Jun 9 07:29:32 2002 +++ linux-2.5.21az/linux/drivers/scsi/seagate.c Sat Jun 15 13:43:30 2002 @@ -102,7 +102,6 @@ #include "scsi.h" #include "hosts.h" #include "seagate.h" -#include "constants.h" #include #include #include "sd.h" @@ -1709,7 +1708,7 @@ #endif printk ("scsi%d : status = ", hostno); print_status (status); - printk ("message = %02x\n", message); + printk (" message = %02x\n", message); #endif /* We shouldn't reach this until *after* BSY has been deasserted */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/sr.c linux-2.5.21az/linux/drivers/scsi/sr.c --- linux-2.5.21z/linux/drivers/scsi/sr.c Sun Jun 9 07:28:12 2002 +++ linux-2.5.21az/linux/drivers/scsi/sr.c Sat Jun 15 13:43:30 2002 @@ -55,7 +55,6 @@ #include "hosts.h" #include "sr.h" #include /* For the door lock/unlock commands */ -#include "constants.h" MODULE_PARM(xa_test, "i"); /* see sr_ioctl.c */ diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/st.c linux-2.5.21az/linux/drivers/scsi/st.c --- linux-2.5.21z/linux/drivers/scsi/st.c Sun Jun 9 07:30:39 2002 +++ linux-2.5.21az/linux/drivers/scsi/st.c Sat Jun 15 13:43:30 2002 @@ -66,8 +66,6 @@ #include "st_options.h" #include "st.h" -#include "constants.h" - static int buffer_kbs; static int write_threshold_kbs; static int max_buffers = (-1); diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/sun3_scsi.c linux-2.5.21az/linux/drivers/scsi/sun3_scsi.c --- linux-2.5.21z/linux/drivers/scsi/sun3_scsi.c Sun Jun 9 07:27:15 2002 +++ linux-2.5.21az/linux/drivers/scsi/sun3_scsi.c Sat Jun 15 13:43:30 2002 @@ -78,7 +78,6 @@ #include "hosts.h" #include "sun3_scsi.h" #include "NCR5380.h" -#include "constants.h" #define USE_WRAPPER #define RESET_BOOT diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/sym53c8xx.c linux-2.5.21az/linux/drivers/scsi/sym53c8xx.c --- linux-2.5.21z/linux/drivers/scsi/sym53c8xx.c Sun Jun 9 07:27:25 2002 +++ linux-2.5.21az/linux/drivers/scsi/sym53c8xx.c Sat Jun 15 13:43:30 2002 @@ -143,7 +143,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "sd.h" #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/sym53c8xx_2/sym_glue.h linux-2.5.21az/linux/drivers/scsi/sym53c8xx_2/sym_glue.h --- linux-2.5.21z/linux/drivers/scsi/sym53c8xx_2/sym_glue.h Sun Jun 9 07:31:31 2002 +++ linux-2.5.21az/linux/drivers/scsi/sym53c8xx_2/sym_glue.h Sat Jun 15 13:43:30 2002 @@ -99,7 +99,6 @@ #include "../scsi.h" #include "../hosts.h" -#include "../constants.h" #include "../sd.h" #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/t128.c linux-2.5.21az/linux/drivers/scsi/t128.c --- linux-2.5.21z/linux/drivers/scsi/t128.c Sun Jun 9 07:31:21 2002 +++ linux-2.5.21az/linux/drivers/scsi/t128.c Sat Jun 15 13:43:30 2002 @@ -116,7 +116,6 @@ #include "t128.h" #define AUTOPROBE_IRQ #include "NCR5380.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/scsi/tmscsim.c linux-2.5.21az/linux/drivers/scsi/tmscsim.c --- linux-2.5.21z/linux/drivers/scsi/tmscsim.c Sun Jun 9 07:30:18 2002 +++ linux-2.5.21az/linux/drivers/scsi/tmscsim.c Sat Jun 15 13:43:30 2002 @@ -228,7 +228,6 @@ #include "scsi.h" #include "hosts.h" -#include "constants.h" #include "sd.h" #include #include diff -u --recursive --new-file linux-2.5.21z/linux/drivers/usb/storage/debug.c linux-2.5.21az/linux/drivers/usb/storage/debug.c --- linux-2.5.21z/linux/drivers/usb/storage/debug.c Sun Jun 9 07:27:23 2002 +++ linux-2.5.21az/linux/drivers/usb/storage/debug.c Sat Jun 15 13:43:30 2002 @@ -218,158 +218,17 @@ unsigned char asc, unsigned char ascq) { - char *keys[] = { - "No Sense", - "Recovered Error", - "Not Ready", - "Medium Error", - "Hardware Error", - "Illegal Request", - "Unit Attention", - "Data Protect", - "Blank Check", - "Vendor Specific", - "Copy Aborted", - "Aborted Command", - "(Obsolete)", - "Volume Overflow", - "Miscompare" - }; + const char *what, *keystr; - unsigned short qual = asc; + keystr = scsi_sense_key_string(key); + what = scsi_extd_sense_format(asc, ascq); - char *what = 0; - char *keystr = 0; - - qual <<= 8; - qual |= ascq; - - if (key>0x0E) + if (keystr == NULL) keystr = "(Unknown Key)"; - else - keystr = keys[key]; - - switch (qual) { - - case 0x0000: what="no additional sense information"; break; - case 0x0001: what="filemark detected"; break; - case 0x0002: what="end of partition/medium detected"; break; - case 0x0003: what="setmark detected"; break; - case 0x0004: what="beginning of partition/medium detected"; break; - case 0x0005: what="end of data detected"; break; - case 0x0006: what="I/O process terminated"; break; - case 0x0011: what="audio play operation in progress"; break; - case 0x0012: what="audio play operation paused"; break; - case 0x0013: what="audio play operation stopped due to error"; break; - case 0x0014: what="audio play operation successfully completed"; break; - case 0x0015: what="no current audio status to return"; break; - case 0x0016: what="operation in progress"; break; - case 0x0017: what="cleaning requested"; break; - case 0x0100: what="no index/sector signal"; break; - case 0x0200: what="no seek complete"; break; - case 0x0300: what="peripheral device write fault"; break; - case 0x0301: what="no write current"; break; - case 0x0302: what="excessive write errors"; break; - case 0x0400: what="LUN not ready, cause not reportable"; break; - case 0x0401: what="LUN in process of becoming ready"; break; - case 0x0402: what="LUN not ready, initializing cmd. required"; break; - case 0x0403: what="LUN not ready, manual intervention required"; break; - case 0x0404: what="LUN not ready, format in progress"; break; - case 0x0405: what="LUN not ready, rebuild in progress"; break; - case 0x0406: what="LUN not ready, recalculation in progress"; break; - case 0x0407: what="LUN not ready, operation in progress"; break; - case 0x0408: what="LUN not ready, long write in progress"; break; - case 0x0500: what="LUN doesn't respond to selection"; break; - case 0x0A00: what="error log overflow"; break; - case 0x0C04: what="compression check miscompare error"; break; - case 0x0C05: what="data expansion occurred during compression"; break; - case 0x0C06: what="block not compressible"; break; - case 0x1102: what="error too long to correct"; break; - case 0x1106: what="CIRC unrecovered error"; break; - case 0x1107: what="data resynchronization error"; break; - case 0x110D: what="decompression CRC error"; break; - case 0x110E: what="can't decompress using declared algorithm"; break; - case 0x110F: what="error reading UPC/EAN number"; break; - case 0x1110: what="error reading ISRC number"; break; - case 0x1200: what="address mark not found for ID field"; break; - case 0x1300: what="address mark not found for data field"; break; - case 0x1403: what="end of data not found"; break; - case 0x1404: what="block sequence error"; break; - case 0x1600: what="data sync mark error"; break; - case 0x1601: what="data sync error: data rewritten"; break; - case 0x1602: what="data sync error: recommend rewrite"; break; - case 0x1603: what="data sync error: data auto-reallocated"; break; - case 0x1604: what="data sync error: recommend reassignment"; break; - case 0x1900: what="defect list error"; break; - case 0x1901: what="defect list not available"; break; - case 0x1902: what="defect list error in primary list"; break; - case 0x1903: what="defect list error in grown list"; break; - case 0x1C00: what="defect list not found"; break; - case 0x2000: what="invalid command operation code"; break; - case 0x2400: what="invalid field in CDB"; break; - case 0x2703: what="associated write protect"; break; - case 0x2800: what="not ready to ready transition"; break; - case 0x2900: what="device reset occurred"; break; - case 0x2903: what="bus device reset function occurred"; break; - case 0x2904: what="device internal reset"; break; - case 0x2B00: what="copy can't execute / host can't disconnect"; break; - case 0x2C00: what="command sequence error"; break; - case 0x2C03: what="current program area is not empty"; break; - case 0x2C04: what="current program area is empty"; break; - case 0x2F00: what="commands cleared by another initiator"; break; - case 0x3001: what="can't read medium: unknown format"; break; - case 0x3002: what="can't read medium: incompatible format"; break; - case 0x3003: what="cleaning cartridge installed"; break; - case 0x3004: what="can't write medium: unknown format"; break; - case 0x3005: what="can't write medium: incompatible format"; break; - case 0x3006: what="can't format medium: incompatible medium"; break; - case 0x3007: what="cleaning failure"; break; - case 0x3008: what="can't write: application code mismatch"; break; - case 0x3009: what="current session not fixated for append"; break; - case 0x3201: what="defect list update failure"; break; - case 0x3400: what="enclosure failure"; break; - case 0x3500: what="enclosure services failure"; break; - case 0x3502: what="enclosure services unavailable"; break; - case 0x3503: what="enclosure services transfer failure"; break; - case 0x3504: what="enclosure services transfer refused"; break; - case 0x3A00: what="media not present"; break; - case 0x3B0F: what="end of medium reached"; break; - case 0x3F02: what="changed operating definition"; break; - case 0x4100: what="data path failure (should use 40 NN)"; break; - case 0x4A00: what="command phase error"; break; - case 0x4B00: what="data phase error"; break; - case 0x5100: what="erase failure"; break; - case 0x5200: what="cartridge fault"; break; - case 0x6300: what="end of user area encountered on this track"; break; - case 0x6600: what="automatic document feeder cover up"; break; - case 0x6601: what="automatic document feeder lift up"; break; - case 0x6602: what="document jam in auto doc feeder"; break; - case 0x6603: what="document miss feed auto in doc feeder"; break; - case 0x6700: what="configuration failure"; break; - case 0x6701: what="configuration of incapable LUN's failed"; break; - case 0x6702: what="add logical unit failed"; break; - case 0x6706: what="attachment of logical unit failed"; break; - case 0x6707: what="creation of logical unit failed"; break; - case 0x6900: what="data loss on logical unit"; break; - case 0x6E00: what="command to logical unit failed"; break; - case 0x7100: what="decompression exception long algorithm ID"; break; - case 0x7204: what="empty or partially written reserved track"; break; - case 0x7300: what="CD control error"; break; - - default: - if (asc==0x40) { - US_DEBUGP("%s: diagnostic failure on component" - " %02X\n", keystr, ascq); - return; - } - if (asc==0x70) { - US_DEBUGP("%s: decompression exception short" - " algorithm ID of %02X\n", keystr, ascq); - return; - } + if (what == NULL) what = "(unknown ASC/ASCQ)"; - } - US_DEBUGP("%s: %s\n", keystr, what); + US_DEBUGP("%s: ", keystr); + US_DEBUGPX(what, ascq); + US_DEBUGPX("\n"); } -