commit a0d9384967214783a92973c920092b7251c03e57 Author: Greg Kroah-Hartman Date: Thu Nov 3 23:56:57 2022 +0900 Linux 5.4.223 Link: https://lore.kernel.org/r/20221102022051.821538553@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman commit a0a2a4bdd10184a883fc66d46c94d7eb0d2576bb Author: Biju Das Date: Tue Oct 25 16:56:55 2022 +0100 can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive commit 702de2c21eed04c67cefaaedc248ef16e5f6b293 upstream. We are seeing an IRQ storm on the global receive IRQ line under heavy CAN bus load conditions with both CAN channels enabled. Conditions: The global receive IRQ line is shared between can0 and can1, either of the channels can trigger interrupt while the other channel's IRQ line is disabled (RFIE). When global a receive IRQ interrupt occurs, we mask the interrupt in the IRQ handler. Clearing and unmasking of the interrupt is happening in rx_poll(). There is a race condition where rx_poll() unmasks the interrupt, but the next IRQ handler does not mask the IRQ due to NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and can1 is triggering RX interrupt, the delay in rx_poll() processing results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm. This patch fixes the issue by checking IRQ active and enabled before handling the IRQ on a particular channel. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Suggested-by: Marc Kleine-Budde Signed-off-by: Biju Das Link: https://lore.kernel.org/all/20221025155657.1426948-2-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde [biju: removed gpriv from RCANFD_RFCC_RFIE macro] Signed-off-by: Biju Das Signed-off-by: Greg Kroah-Hartman commit fc0eecb8b4576f1cb7294ec888a726318ce43068 Author: Vladimir Oltean Date: Thu Oct 27 21:29:25 2022 +0300 net: enetc: survive memory pressure without crashing [ Upstream commit 84ce1ca3fe9e1249bf21176ff162200f1c4e5ed1 ] Under memory pressure, enetc_refill_rx_ring() may fail, and when called during the enetc_open() -> enetc_setup_rxbdr() procedure, this is not checked for. An extreme case of memory pressure will result in exactly zero buffers being allocated for the RX ring, and in such a case it is expected that hardware drops all RX packets due to lack of buffers. This does not happen, because the reset-default value of the consumer and produces index is 0, and this makes the ENETC think that all buffers have been initialized and that it owns them (when in reality none were). The hardware guide explains this best: | Configure the receive ring producer index register RBaPIR with a value | of 0. The producer index is initially configured by software but owned | by hardware after the ring has been enabled. Hardware increments the | index when a frame is received which may consume one or more BDs. | Hardware is not allowed to increment the producer index to match the | consumer index since it is used to indicate an empty condition. The ring | can hold at most RBLENR[LENGTH]-1 received BDs. | | Configure the receive ring consumer index register RBaCIR. The | consumer index is owned by software and updated during operation of the | of the BD ring by software, to indicate that any receive data occupied | in the BD has been processed and it has been prepared for new data. | - If consumer index and producer index are initialized to the same | value, it indicates that all BDs in the ring have been prepared and | hardware owns all of the entries. | - If consumer index is initialized to producer index plus N, it would | indicate N BDs have been prepared. Note that hardware cannot start if | only a single buffer is prepared due to the restrictions described in | (2). | - Software may write consumer index to match producer index anytime | while the ring is operational to indicate all received BDs prior have | been processed and new BDs prepared for hardware. Normally, the value of rx_ring->rcir (consumer index) is brought in sync with the rx_ring->next_to_use software index, but this only happens if page allocation ever succeeded. When PI==CI==0, the hardware appears to receive frames and write them to DMA address 0x0 (?!), then set the READY bit in the BD. The enetc_clean_rx_ring() function (and its XDP derivative) is naturally not prepared to handle such a condition. It will attempt to process those frames using the rx_swbd structure associated with index i of the RX ring, but that structure is not fully initialized (enetc_new_page() does all of that). So what happens next is undefined behavior. To operate using no buffer, we must initialize the CI to PI + 1, which will block the hardware from advancing the CI any further, and drop everything. The issue was seen while adding support for zero-copy AF_XDP sockets, where buffer memory comes from user space, which can even decide to supply no buffers at all (example: "xdpsock --txonly"). However, the bug is present also with the network stack code, even though it would take a very determined person to trigger a page allocation failure at the perfect time (a series of ifup/ifdown under memory pressure should eventually reproduce it given enough retries). Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Vladimir Oltean Reviewed-by: Claudiu Manoil Link: https://lore.kernel.org/r/20221027182925.3256653-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 69dd3ad406c49aa69ce4852c15231ac56af8caf9 Author: Tariq Toukan Date: Wed Oct 26 14:51:45 2022 +0100 net/mlx5: Fix possible use-after-free in async command interface [ Upstream commit bacd22df95147ed673bec4692ab2d4d585935241 ] mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 827e36a031e486057ae8e844427c3b148224f9be Author: Hyong Youb Kim Date: Wed Oct 26 14:51:39 2022 +0100 net/mlx5e: Do not increment ESN when updating IPsec ESN state [ Upstream commit 888be6b279b7257b5f6e4c9527675bff0a335596 ] An offloaded SA stops receiving after about 2^32 + replay_window packets. For example, when SA reaches , all subsequent packets get dropped with SA-icv-failure (integrity_failed). To reproduce the bug: - ConnectX-6 Dx with crypto enabled (FW 22.30.1004) - ipsec.conf: nic-offload = yes replay-window = 32 esn = yes salifetime=24h - Run netperf for a long time to send more than 2^32 packets netperf -H -t TCP_STREAM -l 20000 When 2^32 + replay_window packets are received, the replay window moves from the 2nd half of subspace (overlap=1) to the 1st half (overlap=0). The driver then updates the 'esn' value in NIC (i.e. seq_hi) as follows. seq_hi = xfrm_replay_seqhi(seq_bottom) new esn in NIC = seq_hi + 1 The +1 increment is wrong, as seq_hi already contains the correct seq_hi. For example, when seq_hi=1, the driver actually tells NIC to use seq_hi=2 (esn). This incorrect esn value causes all subsequent packets to fail integrity checks (SA-icv-failure). So, do not increment. Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN") Signed-off-by: Hyong Youb Kim Acked-by: Leon Romanovsky Signed-off-by: Saeed Mahameed Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7dc6ce3ef20f4ea16f489b613bb1b32771b73ac7 Author: Nicolas Dichtel Date: Thu Oct 20 12:09:52 2022 +0200 nh: fix scope used to find saddr when adding non gw nh [ Upstream commit bac0f937c343d651874f83b265ca8f5070ed4f06 ] As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but fib_info_update_nhc_saddr() needs the scope of the route, which is the scope "before" fib_nh_scope, ie fib_nh_scope - 1. This patch fixes the problem described in commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/ Signed-off-by: Nicolas Dichtel Reviewed-by: Julian Anastasov Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ba6ee85355ad80b4a922053170d4099d34fe6567 Author: Yang Yingliang Date: Tue Oct 25 21:00:11 2022 +0800 net: ehea: fix possible memory leak in ehea_register_port() [ Upstream commit 0e7ce23a917a9cc83ca3c779fbba836bca3bcf1e ] If of_device_register() returns error, the of node and the name allocated in dev_set_name() is leaked, call put_device() to give up the reference that was set in device_initialize(), so that of node is put in logical_port_release() and the name is freed in kobject_cleanup(). Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 4175d6381f6f1c152a73183caf1c72b3d6909f31 Author: Aaron Conole Date: Tue Oct 25 06:50:17 2022 -0400 openvswitch: switch from WARN to pr_warn [ Upstream commit fd954cc1919e35cb92f78671cab6e42d661945a3 ] As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still preserve the warning to the user that feature downgrade occurred. We likely cannot introduce other kinds of checks / enforcement here because syzbot can generate different genl versions to the datapath. Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf Signed-off-by: Aaron Conole Acked-by: Ilya Maximets Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 0667bb60000dbd9b6124ea700ebc3df49dce41c8 Author: Takashi Iwai Date: Thu Oct 27 08:52:33 2022 +0200 ALSA: aoa: Fix I2S device accounting [ Upstream commit f1fae475f10a26b7e34da4ff2e2f19b7feb3548e ] i2sbus_add_dev() is supposed to return the number of probed devices, i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling that returns -ENODEV; this will screw up the accumulation number counted in the caller, i2sbus_probe(). Fix the return value to 0 and add the comment for better understanding for readers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 5bdea674534153110b90d70b02f2fbaf48b2c0eb Author: Yang Yingliang Date: Thu Oct 27 09:34:38 2022 +0800 ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev() [ Upstream commit 4a4c8482e370d697738a78dcd7bf2780832cb712 ] dev_set_name() in soundbus_add_one() allocates memory for name, it need be freed when of_device_register() fails, call soundbus_dev_put() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. And other resources are also freed in i2sbus_release_dev(), so it can return 0 directly. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 2a47cc2a3d04339d69768ddc3db39f6b530802ef Author: Sudeep Holla Date: Tue Oct 25 13:34:32 2022 +0100 PM: domains: Fix handling of unavailable/disabled idle states [ Upstream commit e0c57a5c70c13317238cb19a7ded0eab4a5f7de5 ] Platforms can provide the information about the availability of each idle states via status flag. Platforms may have to disable one or more idle states for various reasons like broken firmware or other unmet dependencies. Fix handling of such unavailable/disabled idle states by ignoring them while parsing the states. Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing") Signed-off-by: Sudeep Holla Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit a49e74cc7489bedfaedaa8d38dc92f6b1e7f90ba Author: Yang Yingliang Date: Mon Oct 24 21:13:38 2022 +0800 net: ksz884x: fix missing pci_disable_device() on error in pcidev_init() [ Upstream commit 5da6d65590a0698199df44d095e54b0ed1708178 ] pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() while unbinding device. Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e46f699ac23d139ea6ff6bd0bd10fba9dbbb354d Author: Slawomir Laba Date: Mon Oct 24 03:05:26 2022 -0700 i40e: Fix flow-type by setting GL_HASH_INSET registers [ Upstream commit 3b32c9932853e11d71f9db012d69e92e4669ba23 ] Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e88c2a1e28c5475065563d66c07ca879a9afbd07 Author: Sylwester Dziedziuch Date: Mon Oct 24 03:05:25 2022 -0700 i40e: Fix VF hang when reset is triggered on another VF [ Upstream commit 52424f974bc53c26ba3f00300a00e9de9afcd972 ] When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch Signed-off-by: Mateusz Palczewski Tested-by: Konrad Jankowski Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 28c47fd23c208c3f7d75c5c4d02ae36b49492a65 Author: Slawomir Laba Date: Mon Oct 24 03:05:24 2022 -0700 i40e: Fix ethtool rx-flow-hash setting for X722 [ Upstream commit 54b5af5a438076082d482cab105b1bd484ab5074 ] When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba Signed-off-by: Michal Jaron Signed-off-by: Mateusz Palczewski Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Jacob Keller Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit d303dabe7e03bded171a01163109e03644e7d27e Author: Hans Verkuil Date: Wed Oct 12 16:46:17 2022 +0100 media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced' [ Upstream commit 8da7f0976b9071b528c545008de9d10cc81883b1 ] If it is a progressive (non-interlaced) format, then ignore the interlaced timing values. Signed-off-by: Hans Verkuil Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit b4a3a01762ae072c7f6ff2ff53b5019761288346 Author: Hans Verkuil Date: Thu Oct 13 09:00:34 2022 +0100 media: v4l2-dv-timings: add sanity checks for blanking values [ Upstream commit 4b6d66a45ed34a15721cb9e11492fa1a24bc83df ] Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided blanking values are reasonable. Signed-off-by: Hans Verkuil Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit d8f479c777b413ba42c63e1a5ce6eee3d25b6714 Author: Hans Verkuil Date: Thu Oct 13 15:18:46 2022 +0100 media: vivid: dev->bitmap_cap wasn't freed in all cases [ Upstream commit 1f65ea411cc7b6ff128d82a3493d7b5648054e6f ] Whenever the compose width/height values change, the dev->bitmap_cap vmalloc'ed array must be freed and dev->bitmap_cap set to NULL. This was done in some places, but not all. This is only an issue if overlay support is enabled and the bitmap clipping is used. Signed-off-by: Hans Verkuil Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 9d6870949c2c294eff8e7db3d3307957416481e1 Author: Hans Verkuil Date: Wed Oct 12 15:32:28 2022 +0100 media: vivid: s_fbuf: add more sanity checks [ Upstream commit f8bcaf714abfc94818dff8c0db84d750433984f4 ] VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root can use it. But at least check if the framebuffer parameters match that of one of the framebuffer created by vivid, and reject anything else. Signed-off-by: Hans Verkuil Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 8e1592d4151963ed5a02051a50f5369238facc62 Author: Mario Limonciello Date: Wed Oct 12 22:50:17 2022 -0500 PM: hibernate: Allow hybrid sleep to work with s2idle [ Upstream commit 85850af4fc47132f3f2f0dd698b90f67906600b4 ] Hybrid sleep is currently hardcoded to only operate with S3 even on systems that might not support it. Instead of assuming this mode is what the user wants to use, for hybrid sleep follow the setting of `mem_sleep_current` which will respect mem_sleep_default kernel command line and policy decisions made by the presence of the FADT low power idle bit. Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()") Reported-and-tested-by: kolAflash Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574 Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 77454bc744e241b58b78bbf18f880810d4eadfac Author: Dongliang Mu Date: Mon Oct 24 19:48:07 2022 +0800 can: mscan: mpc5xxx: mpc5xxx_can_probe(): add missing put_clock() in error path [ Upstream commit 3e5b3418827cefb5e1cc658806f02965791b8f07 ] The commit 1149108e2fbf ("can: mscan: improve clock API use") only adds put_clock() in mpc5xxx_can_remove() function, forgetting to add put_clock() in the error handling code. Fix this bug by adding put_clock() in the error handling code. Fixes: 1149108e2fbf ("can: mscan: improve clock API use") Signed-off-by: Dongliang Mu Link: https://lore.kernel.org/all/20221024133828.35881-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin commit f79de6451eafb6c58f019523453f68b4f019cf83 Author: Neal Cardwell Date: Fri Oct 21 17:08:21 2022 +0000 tcp: fix indefinite deferral of RTO with SACK reneging [ Upstream commit 3d2af9cce3133b3bc596a9d065c6f9d93419ccfb ] This commit fixes a bug that can cause a TCP data sender to repeatedly defer RTOs when encountering SACK reneging. The bug is that when we're in fast recovery in a scenario with SACK reneging, every time we get an ACK we call tcp_check_sack_reneging() and it can note the apparent SACK reneging and rearm the RTO timer for srtt/2 into the future. In some SACK reneging scenarios that can happen repeatedly until the receive window fills up, at which point the sender can't send any more, the ACKs stop arriving, and the RTO fires at srtt/2 after the last ACK. But that can take far too long (O(10 secs)), since the connection is stuck in fast recovery with a low cwnd that cannot grow beyond ssthresh, even if more bandwidth is available. This fix changes the logic in tcp_check_sack_reneging() to only rearm the RTO timer if data is cumulatively ACKed, indicating forward progress. This avoids this kind of nearly infinite loop of RTO timer re-arming. In addition, this meets the goals of tcp_check_sack_reneging() in handling Windows TCP behavior that looks temporarily like SACK reneging but is not really. Many thanks to Jakub Kicinski and Neil Spring, who reported this issue and provided critical packet traces that enabled root-causing this issue. Also, many thanks to Jakub Kicinski for testing this fix. Fixes: 5ae344c949e7 ("tcp: reduce spurious retransmits due to transient SACK reneging") Reported-by: Jakub Kicinski Reported-by: Neil Spring Signed-off-by: Neal Cardwell Reviewed-by: Eric Dumazet Cc: Yuchung Cheng Tested-by: Jakub Kicinski Link: https://lore.kernel.org/r/20221021170821.1093930-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 38e4516960571c01024c8463b5278dca7593b8b3 Author: Zhang Changzhong Date: Fri Oct 21 09:32:24 2022 +0800 net: lantiq_etop: don't free skb when returning NETDEV_TX_BUSY [ Upstream commit 9c1eaa27ec599fcc25ed4970c0b73c247d147a2b ] The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver") Signed-off-by: Zhang Changzhong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 97ad240fd9aa9214497d14af2b91608e20856cac Author: Zhengchao Shao Date: Thu Oct 20 10:42:13 2022 +0800 net: fix UAF issue in nfqnl_nf_hook_drop() when ops_init() failed [ Upstream commit d266935ac43d57586e311a087510fe6a084af742 ] When the ops_init() interface is invoked to initialize the net, but ops->init() fails, data is released. However, the ptr pointer in net->gen is invalid. In this case, when nfqnl_nf_hook_drop() is invoked to release the net, invalid address access occurs. The process is as follows: setup_net() ops_init() data = kzalloc(...) ---> alloc "data" net_assign_generic() ---> assign "date" to ptr in net->gen ... ops->init() ---> failed ... kfree(data); ---> ptr in net->gen is invalid ... ops_exit_list() ... nfqnl_nf_hook_drop() *q = nfnl_queue_pernet(net) ---> q is invalid The following is the Call Trace information: BUG: KASAN: use-after-free in nfqnl_nf_hook_drop+0x264/0x280 Read of size 8 at addr ffff88810396b240 by task ip/15855 Call Trace: dump_stack_lvl+0x8e/0xd1 print_report+0x155/0x454 kasan_report+0xba/0x1f0 nfqnl_nf_hook_drop+0x264/0x280 nf_queue_nf_hook_drop+0x8b/0x1b0 __nf_unregister_net_hook+0x1ae/0x5a0 nf_unregister_net_hooks+0xde/0x130 ops_exit_list+0xb0/0x170 setup_net+0x7ac/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Allocated by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_kmalloc+0xa1/0xb0 __kmalloc+0x49/0xb0 ops_init+0xe7/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 15855: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x155/0x1b0 slab_free_freelist_hook+0x11b/0x220 __kmem_cache_free+0xa4/0x360 ops_init+0xb9/0x410 setup_net+0x5aa/0xbd0 copy_net_ns+0x2e6/0x6b0 create_new_namespaces+0x382/0xa50 unshare_nsproxy_namespaces+0xa6/0x1c0 ksys_unshare+0x3a4/0x7e0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: f875bae06533 ("net: Automatically allocate per namespace data.") Signed-off-by: Zhengchao Shao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 663682cd3192dd4f3547b7890a4391c72441001d Author: Eric Dumazet Date: Thu Oct 20 22:45:12 2022 +0000 kcm: annotate data-races around kcm->rx_wait [ Upstream commit 0c745b5141a45a076f1cb9772a399f7ebcb0948a ] kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. syzbot reported: BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1: reserve_rx_kcm net/kcm/kcmsock.c:283 [inline] kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0: kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit e94395e916b48a5b912a0a04570981b5b091acb0 Author: Eric Dumazet Date: Thu Oct 20 22:45:11 2022 +0000 kcm: annotate data-races around kcm->rx_psock [ Upstream commit 15e4dabda11b0fa31d510a915d1a580f47dfc92e ] kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. We do the same for kcm->rx_wait in the following patch. syzbot reported: BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1: unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313 kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0: kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffff88812971ce00 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit f85e54b4f3e5ac9b6c90d582f16ac3b3ed678daf Author: Raju Rangoju Date: Thu Oct 20 12:12:15 2022 +0530 amd-xgbe: add the bit rate quirk for Molex cables [ Upstream commit 170a9e341a3b02c0b2ea0df16ef14a33a4f41de8 ] The offset 12 (bit-rate) of EEPROM SFP DAC (passive) cables is expected to be in the range 0x64 to 0x68. However, the 5 meter and 7 meter Molex passive cables have the rate ceiling 0x78 at offset 12. Add a quirk for Molex passive cables to extend the rate ceiling to 0x78. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju Acked-by: Tom Lendacky Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 71ba2a95663a4821917a1819ba1f9b420140c35b Author: Raju Rangoju Date: Thu Oct 20 12:12:14 2022 +0530 amd-xgbe: fix the SFP compliance codes check for DAC cables [ Upstream commit 09c5f6bf11ac98874339e55f4f5f79a9dbc9b375 ] The current XGBE code assumes that offset 6 of EEPROM SFP DAC (passive) cables is NULL. However, some cables (the 5 meter and 7 meter Molex passive cables) have non-zero data at offset 6. Fix the logic by moving the passive cable check above the active checks, so as not to be improperly identified as an active cable. This will fix the issue for any passive cable that advertises 1000Base-CX in offset 6. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Raju Rangoju Acked-by: Tom Lendacky Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fe3fd27083db3fba2cf794ec8ccb648ac3ad7711 Author: Chen Zhongjin Date: Wed Jul 27 11:15:06 2022 +0800 x86/unwind/orc: Fix unreliable stack dump with gcov [ Upstream commit 230db82413c091bc16acee72650f48d419cebe49 ] When a console stack dump is initiated with CONFIG_GCOV_PROFILE_ALL enabled, show_trace_log_lvl() gets out of sync with the ORC unwinder, causing the stack trace to show all text addresses as unreliable: # echo l > /proc/sysrq-trigger [ 477.521031] sysrq: Show backtrace of all active CPUs [ 477.523813] NMI backtrace for cpu 0 [ 477.524492] CPU: 0 PID: 1021 Comm: bash Not tainted 6.0.0 #65 [ 477.525295] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 [ 477.526439] Call Trace: [ 477.526854] [ 477.527216] ? dump_stack_lvl+0xc7/0x114 [ 477.527801] ? dump_stack+0x13/0x1f [ 477.528331] ? nmi_cpu_backtrace.cold+0xb5/0x10d [ 477.528998] ? lapic_can_unplug_cpu+0xa0/0xa0 [ 477.529641] ? nmi_trigger_cpumask_backtrace+0x16a/0x1f0 [ 477.530393] ? arch_trigger_cpumask_backtrace+0x1d/0x30 [ 477.531136] ? sysrq_handle_showallcpus+0x1b/0x30 [ 477.531818] ? __handle_sysrq.cold+0x4e/0x1ae [ 477.532451] ? write_sysrq_trigger+0x63/0x80 [ 477.533080] ? proc_reg_write+0x92/0x110 [ 477.533663] ? vfs_write+0x174/0x530 [ 477.534265] ? handle_mm_fault+0x16f/0x500 [ 477.534940] ? ksys_write+0x7b/0x170 [ 477.535543] ? __x64_sys_write+0x1d/0x30 [ 477.536191] ? do_syscall_64+0x6b/0x100 [ 477.536809] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 477.537609] This happens when the compiled code for show_stack() has a single word on the stack, and doesn't use a tail call to show_stack_log_lvl(). (CONFIG_GCOV_PROFILE_ALL=y is the only known case of this.) Then the __unwind_start() skip logic hits an off-by-one bug and fails to unwind all the way to the intended starting frame. Fix it by reverting the following commit: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks") The original justification for that commit no longer exists. That original issue was later fixed in a different way, with the following commit: f2ac57a4c49d ("x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels") Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks") Signed-off-by: Chen Zhongjin [jpoimboe: rewrite commit log] Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra Signed-off-by: Sasha Levin commit fda2d07234a21be4d71ebfe97a45f499726902d6 Author: Yang Yingliang Date: Wed Oct 19 14:41:04 2022 +0800 net: netsec: fix error handling in netsec_register_mdio() [ Upstream commit 94423589689124e8cd145b38a1034be7f25835b2 ] If phy_device_register() fails, phy_device_free() need be called to put refcount, so memory of phy device and device name can be freed in callback function. If get_phy_device() fails, mdiobus_unregister() need be called, or it will cause warning in mdiobus_free() and kobject is leaked. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221019064104.3228892-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 24b129aed8730e48f47d852d58d76825ab6f407c Author: Xin Long Date: Tue Oct 18 15:19:50 2022 -0400 tipc: fix a null-ptr-deref in tipc_topsrv_accept [ Upstream commit 82cb4e4612c633a9ce320e1773114875604a3cce ] syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null. Fixes: 0ef897be12b8 ("tipc: separate topology server listener socket from subcsriber sockets") Reported-by: syzbot+c5ce866a8d30f4be0651@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Jon Maloy Link: https://lore.kernel.org/r/4eee264380c409c61c6451af1059b7fb271a7e7b.1666120790.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 758dbcc6fbf2286eff02743b093c70a18a407d66 Author: Yang Yingliang Date: Wed Oct 19 17:30:25 2022 +0800 ALSA: ac97: fix possible memory leak in snd_ac97_dev_register() [ Upstream commit 4881bda5ea05c8c240fc8afeaa928e2bc43f61fa ] If device_register() fails in snd_ac97_dev_register(), it should call put_device() to give up reference, or the name allocated in dev_set_name() is leaked. Fixes: 0ca06a00e206 ("[ALSA] AC97 bus interface for ad-hoc drivers") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit ccaeef126ed12046b14ced79eaf6547e110b746b Author: Randy Dunlap Date: Sun Oct 9 19:28:46 2022 -0700 arc: iounmap() arg is volatile [ Upstream commit c44f15c1c09481d50fd33478ebb5b8284f8f5edb ] Add 'volatile' to iounmap()'s argument to prevent build warnings. This make it the same as other major architectures. Placates these warnings: (12 such warnings) ../drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe': ../drivers/video/fbdev/riva/fbdev.c:2067:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Werror=discarded-qualifiers] 2067 | iounmap(default_par->riva.PRAMIN); Fixes: 1162b0701b14b ("ARC: I/O and DMA Mappings") Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: linux-snps-arc@lists.infradead.org Cc: Arnd Bergmann Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin commit fa434a64a4ead3ce3fca4b58f4e094b47a0b2468 Author: Nathan Huckleberry Date: Tue Sep 13 13:55:48 2022 -0700 drm/msm: Fix return type of mdp4_lvds_connector_mode_valid [ Upstream commit 0b33a33bd15d5bab73b87152b220a8d0153a4587 ] The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of mdp4_lvds_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry Fixes: 3e87599b68e7 ("drm/msm/mdp4: add LVDS panel support") Reviewed-by: Abhinav Kumar Reviewed-by: Nathan Chancellor Patchwork: https://patchwork.freedesktop.org/patch/502878/ Link: https://lore.kernel.org/r/20220913205551.155128-1-nhuck@google.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin commit 29a6902eb0761154f77da901d515a9dd5275109b Author: Alexander Stein Date: Fri Jul 22 09:11:31 2022 +0200 media: v4l2: Fix v4l2_i2c_subdev_set_name function documentation [ Upstream commit bb9ea2c31fa11b789ade4c3abcdda3c5370a76ab ] The doc says the I²C device's name is used if devname is NULL, but actually the I²C device driver's name is used. Fixes: 0658293012af ("media: v4l: subdev: Add a function to set an I²C sub-device's name") Signed-off-by: Alexander Stein Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 6f3511eb8654b3d64e3235b0083704dad4fcc833 Author: Wei Yongjun Date: Mon Sep 19 16:08:30 2022 +0000 net: ieee802154: fix error return code in dgram_bind() commit 444d8ad4916edec8a9fc684e841287db9b1e999f upstream. Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: 94160108a70c ("net/ieee802154: fix uninit value bug in dgram_sendmsg") Signed-off-by: Wei Yongjun Link: https://lore.kernel.org/r/20220919160830.1436109-1-weiyongjun@huaweicloud.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 11993652d0b49e27272db0a37aa828d8a3a4b92b Author: Rik van Riel Date: Mon Oct 17 20:25:05 2022 -0400 mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages commit 12df140f0bdfae5dcfc81800970dd7f6f632e00c upstream. The h->*_huge_pages counters are protected by the hugetlb_lock, but alloc_huge_page has a corner case where it can decrement the counter outside of the lock. This could lead to a corrupted value of h->resv_huge_pages, which we have observed on our systems. Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a potential race. Link: https://lkml.kernel.org/r/20221017202505.0e6a4fcd@imladris.surriel.com Fixes: a88c76954804 ("mm: hugetlb: fix hugepage memory leak caused by wrong reserve count") Signed-off-by: Rik van Riel Reviewed-by: Mike Kravetz Cc: Naoya Horiguchi Cc: Glen McCready Cc: Mike Kravetz Cc: Muchun Song Cc: Signed-off-by: Andrew Morton Signed-off-by: Mike Kravetz Signed-off-by: Greg Kroah-Hartman commit 5a2d7c93d9b935643e9a7e22ae7c7879e94da2ec Author: Chen Zhou Date: Fri Jan 15 17:37:17 2021 +0800 cgroup-v1: add disabled controller check in cgroup1_parse_param() commit 61e960b07b637f0295308ad91268501d744c21b5 upstream. When mounting a cgroup hierarchy with disabled controller in cgroup v1, all available controllers will be attached. For example, boot with cgroup_no_v1=cpu or cgroup_disable=cpu, and then mount with "mount -t cgroup -ocpu cpu /sys/fs/cgroup/cpu", then all enabled controllers will be attached except cpu. Fix this by adding disabled controller check in cgroup1_parse_param(). If the specified controller is disabled, just return error with information "Disabled controller xx" rather than attaching all the other enabled controllers. Fixes: f5dfb5315d34 ("cgroup: take options parsing into ->parse_monolithic()") Signed-off-by: Chen Zhou Reviewed-by: Zefan Li Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Luiz Capitulino Signed-off-by: Greg Kroah-Hartman commit 3d056d81b93a787613eda44aeb21fc14c3392b34 Author: M. Vefa Bicakci Date: Sun Oct 2 18:20:05 2022 -0400 xen/gntdev: Prevent leaking grants commit 0991028cd49567d7016d1b224fe0117c35059f86 upstream. Prior to this commit, if a grant mapping operation failed partially, some of the entries in the map_ops array would be invalid, whereas all of the entries in the kmap_ops array would be valid. This in turn would cause the following logic in gntdev_map_grant_pages to become invalid: for (i = 0; i < map->count; i++) { if (map->map_ops[i].status == GNTST_okay) { map->unmap_ops[i].handle = map->map_ops[i].handle; if (!use_ptemod) alloced++; } if (use_ptemod) { if (map->kmap_ops[i].status == GNTST_okay) { if (map->map_ops[i].status == GNTST_okay) alloced++; map->kunmap_ops[i].handle = map->kmap_ops[i].handle; } } } ... atomic_add(alloced, &map->live_grants); Assume that use_ptemod is true (i.e., the domain mapping the granted pages is a paravirtualized domain). In the code excerpt above, note that the "alloced" variable is only incremented when both kmap_ops[i].status and map_ops[i].status are set to GNTST_okay (i.e., both mapping operations are successful). However, as also noted above, there are cases where a grant mapping operation fails partially, breaking the assumption of the code excerpt above. The aforementioned causes map->live_grants to be incorrectly set. In some cases, all of the map_ops mappings fail, but all of the kmap_ops mappings succeed, meaning that live_grants may remain zero. This in turn makes it impossible to unmap the successfully grant-mapped pages pointed to by kmap_ops, because unmap_grant_pages has the following snippet of code at its beginning: if (atomic_read(&map->live_grants) == 0) return; /* Nothing to do */ In other cases where only some of the map_ops mappings fail but all kmap_ops mappings succeed, live_grants is made positive, but when the user requests unmapping the grant-mapped pages, __unmap_grant_pages_done will then make map->live_grants negative, because the latter function does not check if all of the pages that were requested to be unmapped were actually unmapped, and the same function unconditionally subtracts "data->count" (i.e., a value that can be greater than map->live_grants) from map->live_grants. The side effects of a negative live_grants value have not been studied. The net effect of all of this is that grant references are leaked in one of the above conditions. In Qubes OS v4.1 (which uses Xen's grant mechanism extensively for X11 GUI isolation), this issue manifests itself with warning messages like the following to be printed out by the Linux kernel in the VM that had granted pages (that contain X11 GUI window data) to dom0: "g.e. 0x1234 still pending", especially after the user rapidly resizes GUI VM windows (causing some grant-mapping operations to partially or completely fail, due to the fact that the VM unshares some of the pages as part of the window resizing, making the pages impossible to grant-map from dom0). The fix for this issue involves counting all successful map_ops and kmap_ops mappings separately, and then adding the sum to live_grants. During unmapping, only the number of successfully unmapped grants is subtracted from live_grants. The code is also modified to check for negative live_grants values after the subtraction and warn the user. Link: https://github.com/QubesOS/qubes-issues/issues/7631 Fixes: dbe97cff7dd9 ("xen/gntdev: Avoid blocking in unmap_grant_pages()") Cc: stable@vger.kernel.org Signed-off-by: M. Vefa Bicakci Acked-by: Demi Marie Obenour Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/20221002222006.2077-2-m.v.b@runbox.com Signed-off-by: Juergen Gross Signed-off-by: Demi Marie Obenour Signed-off-by: Greg Kroah-Hartman commit 8f589b5c0e7b16427e68a6254593ba7a19e60911 Author: Jan Beulich Date: Fri Sep 17 08:13:08 2021 +0200 Xen/gntdev: don't ignore kernel unmapping error commit f28347cc66395e96712f5c2db0a302ee75bafce6 upstream. While working on XSA-361 and its follow-ups, I failed to spot another place where the kernel mapping part of an operation was not treated the same as the user space part. Detect and propagate errors and add a 2nd pr_debug(). Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/c2513395-74dc-aea3-9192-fd265aa44e35@suse.com Signed-off-by: Juergen Gross Signed-off-by: Demi Marie Obenour Co-authored-by: Demi Marie Obenour Signed-off-by: Greg Kroah-Hartman commit f45ee2038464451a4c768bea3975b79dff685c22 Author: Chandan Babu R Date: Mon Oct 31 10:23:54 2022 +0530 xfs: force the log after remapping a synchronous-writes file From: "Darrick J. Wong" commit 5ffce3cc22a0e89813ed0c7162a68b639aef9ab6 upstream. Commit 5833112df7e9 tried to make it so that a remap operation would force the log out to disk if the filesystem is mounted with mandatory synchronous writes. Unfortunately, that commit failed to handle the case where the inode or the file descriptor require mandatory synchronous writes. Refactor the check into into a helper that will look for all three conditions, and now we can treat reflink just like any other synchronous write. Fixes: 5833112df7e9 ("xfs: reflink should force the log out if mounted with wsync") Signed-off-by: Darrick J. Wong Reviewed-by: Brian Foster Reviewed-by: Christoph Hellwig Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 102de7717d63090bc6dcf8cc007723fa077c4e86 Author: Chandan Babu R Date: Mon Oct 31 10:23:53 2022 +0530 xfs: clear XFS_DQ_FREEING if we can't lock the dquot buffer to flush From: "Darrick J. Wong" commit c97738a960a86081a147e7d436138e6481757445 upstream. In commit 8d3d7e2b35ea, we changed xfs_qm_dqpurge to bail out if we can't lock the dquot buf to flush the dquot. This prevents the AIL from blocking on the dquot, but it also forgets to clear the FREEING flag on its way out. A subsequent purge attempt will see the FREEING flag is set and bail out, which leads to dqpurge_all failing to purge all the dquots. (copy-pasting from Dave Chinner's identical patch) This was found by inspection after having xfs/305 hang 1 in ~50 iterations in a quotaoff operation: [ 8872.301115] xfs_quota D13888 92262 91813 0x00004002 [ 8872.302538] Call Trace: [ 8872.303193] __schedule+0x2d2/0x780 [ 8872.304108] ? do_raw_spin_unlock+0x57/0xd0 [ 8872.305198] schedule+0x6e/0xe0 [ 8872.306021] schedule_timeout+0x14d/0x300 [ 8872.307060] ? __next_timer_interrupt+0xe0/0xe0 [ 8872.308231] ? xfs_qm_dqusage_adjust+0x200/0x200 [ 8872.309422] schedule_timeout_uninterruptible+0x2a/0x30 [ 8872.310759] xfs_qm_dquot_walk.isra.0+0x15a/0x1b0 [ 8872.311971] xfs_qm_dqpurge_all+0x7f/0x90 [ 8872.313022] xfs_qm_scall_quotaoff+0x18d/0x2b0 [ 8872.314163] xfs_quota_disable+0x3a/0x60 [ 8872.315179] kernel_quotactl+0x7e2/0x8d0 [ 8872.316196] ? __do_sys_newstat+0x51/0x80 [ 8872.317238] __x64_sys_quotactl+0x1e/0x30 [ 8872.318266] do_syscall_64+0x46/0x90 [ 8872.319193] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 8872.320490] RIP: 0033:0x7f46b5490f2a [ 8872.321414] Code: Bad RIP value. Returning -EAGAIN from xfs_qm_dqpurge() without clearing the XFS_DQ_FREEING flag means the xfs_qm_dqpurge_all() code can never free the dquot, and we loop forever waiting for the XFS_DQ_FREEING flag to go away on the dquot that leaked it via -EAGAIN. Fixes: 8d3d7e2b35ea ("xfs: trylock underlying buffer on dquot flush") Signed-off-by: Darrick J. Wong Reviewed-by: Allison Collins Reviewed-by: Chandan Babu R Reviewed-by: Christoph Hellwig Reviewed-by: Brian Foster Signed-off-by: Dave Chinner Reviewed-by: Dave Chinner Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 03b449a880d15b7b82215871ea6f06904d404f3e Author: Chandan Babu R Date: Mon Oct 31 10:23:52 2022 +0530 xfs: finish dfops on every insert range shift iteration From: Brian Foster commit 9c516e0e4554e8f26ab73d46cbc789d7d8db664d upstream. The recent change to make insert range an atomic operation used the incorrect transaction rolling mechanism. The explicit transaction roll does not finish deferred operations. This means that intents for rmapbt updates caused by extent shifts are not logged until the final transaction commits. Thus if a crash occurs during an insert range, log recovery might leave the rmapbt in an inconsistent state. This was discovered by repeated runs of generic/455. Update insert range to finish dfops on every shift iteration. This is similar to collapse range and ensures that intents are logged with the transactions that make associated changes. Fixes: dd87f87d87fa ("xfs: rework insert range into an atomic operation") Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Acked-by: Darrick J. Wong Signed-off-by: Chandan Babu R Signed-off-by: Greg Kroah-Hartman commit 3d295076ba4e6f57c767788748450ad3c407322e Author: Heiko Carstens Date: Tue Oct 18 13:48:34 2022 +0200 s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser() commit 6ec803025cf3173a57222e4411097166bd06fa98 upstream. For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entry. Cc: Fixes: f058599e22d5 ("s390/pci: Fix s390_mmio_read/write with MIO") Reviewed-by: Niklas Schnelle Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 344e1cb0bafe086ce393eaa8b31be5b56e1bba1b Author: Heiko Carstens Date: Tue Oct 18 13:44:11 2022 +0200 s390/futex: add missing EX_TABLE entry to __futex_atomic_op() commit a262d3ad6a433e4080cecd0a8841104a5906355e upstream. For some exception types the instruction address points behind the instruction that caused the exception. Take that into account and add the missing exception table entry. Cc: Reviewed-by: Vasily Gorbik Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Signed-off-by: Greg Kroah-Hartman commit 4f969d0753bdd8139de6c2a1cff62cd0ee8a23a2 Author: Adrian Hunter Date: Wed Oct 26 10:27:36 2022 +0300 perf auxtrace: Fix address filter symbol name match for modules commit cba04f3136b658583adb191556f99d087589c1cc upstream. For modules, names from kallsyms__parse() contain the module name which meant that module symbols did not match exactly by name. Fix by matching the name string up to the separating tab character. Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026072736.2982-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit c78b0dc6fb7fb389d674e491fd376388cdfb1d53 Author: Christian A. Ehrhardt Date: Tue Sep 13 14:17:23 2022 +0200 kernfs: fix use-after-free in __kernfs_remove commit 4abc99652812a2ddf932f137515d5c5a04723538 upstream. Syzkaller managed to trigger concurrent calls to kernfs_remove_by_name_ns() for the same file resulting in a KASAN detected use-after-free. The race occurs when the root node is freed during kernfs_drain(). To prevent this acquire an additional reference for the root of the tree that is removed before calling __kernfs_remove(). Found by syzkaller with the following reproducer (slab_nomerge is required): syz_mount_image$ext4(0x0, &(0x7f0000000100)='./file0\x00', 0x100000, 0x0, 0x0, 0x0, 0x0) r0 = openat(0xffffffffffffff9c, &(0x7f0000000080)='/proc/self/exe\x00', 0x0, 0x0) close(r0) pipe2(&(0x7f0000000140)={0xffffffffffffffff, 0xffffffffffffffff}, 0x800) mount$9p_fd(0x0, &(0x7f0000000040)='./file0\x00', &(0x7f00000000c0), 0x408, &(0x7f0000000280)={'trans=fd,', {'rfdno', 0x3d, r0}, 0x2c, {'wfdno', 0x3d, r1}, 0x2c, {[{@cache_loose}, {@mmap}, {@loose}, {@loose}, {@mmap}], [{@mask={'mask', 0x3d, '^MAY_EXEC'}}, {@fsmagic={'fsmagic', 0x3d, 0x10001}}, {@dont_hash}]}}) Sample report: ================================================================== BUG: KASAN: use-after-free in kernfs_type include/linux/kernfs.h:335 [inline] BUG: KASAN: use-after-free in kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] BUG: KASAN: use-after-free in __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 Read of size 2 at addr ffff8880088807f0 by task syz-executor.2/857 CPU: 0 PID: 857 Comm: syz-executor.2 Not tainted 6.0.0-rc3-00363-g7726d4c3e60b #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x6e/0x91 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x5e/0x5e5 mm/kasan/report.c:433 kasan_report+0xa3/0x130 mm/kasan/report.c:495 kernfs_type include/linux/kernfs.h:335 [inline] kernfs_leftmost_descendant fs/kernfs/dir.c:1261 [inline] __kernfs_remove.part.0+0x843/0x960 fs/kernfs/dir.c:1369 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f725f983aed Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f725f0f7028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f725faa3f80 RCX: 00007f725f983aed RDX: 00000000200000c0 RSI: 0000000020000040 RDI: 0000000000000000 RBP: 00007f725f9f419c R08: 0000000020000280 R09: 0000000000000000 R10: 0000000000000408 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000006 R14: 00007f725faa3f80 R15: 00007f725f0d7000 Allocated by task 855: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:224 [inline] slab_post_alloc_hook mm/slab.h:727 [inline] slab_alloc_node mm/slub.c:3243 [inline] slab_alloc mm/slub.c:3251 [inline] __kmem_cache_alloc_lru mm/slub.c:3258 [inline] kmem_cache_alloc+0xbf/0x200 mm/slub.c:3268 kmem_cache_zalloc include/linux/slab.h:723 [inline] __kernfs_new_node+0xd4/0x680 fs/kernfs/dir.c:593 kernfs_new_node fs/kernfs/dir.c:655 [inline] kernfs_create_dir_ns+0x9c/0x220 fs/kernfs/dir.c:1010 sysfs_create_dir_ns+0x127/0x290 fs/sysfs/dir.c:59 create_dir lib/kobject.c:63 [inline] kobject_add_internal+0x24a/0x8d0 lib/kobject.c:223 kobject_add_varg lib/kobject.c:358 [inline] kobject_init_and_add+0x101/0x160 lib/kobject.c:441 sysfs_slab_add+0x156/0x1e0 mm/slub.c:5954 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 857: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:367 [inline] ____kasan_slab_free mm/kasan/common.c:329 [inline] __kasan_slab_free+0x108/0x190 mm/kasan/common.c:375 kasan_slab_free include/linux/kasan.h:200 [inline] slab_free_hook mm/slub.c:1754 [inline] slab_free_freelist_hook mm/slub.c:1780 [inline] slab_free mm/slub.c:3534 [inline] kmem_cache_free+0x9c/0x340 mm/slub.c:3551 kernfs_put.part.0+0x2b2/0x520 fs/kernfs/dir.c:547 kernfs_put+0x42/0x50 fs/kernfs/dir.c:521 __kernfs_remove.part.0+0x72d/0x960 fs/kernfs/dir.c:1407 __kernfs_remove fs/kernfs/dir.c:1356 [inline] kernfs_remove_by_name_ns+0x108/0x190 fs/kernfs/dir.c:1589 sysfs_slab_add+0x133/0x1e0 mm/slub.c:5943 __kmem_cache_create+0x3e0/0x550 mm/slub.c:4899 create_cache mm/slab_common.c:229 [inline] kmem_cache_create_usercopy+0x167/0x2a0 mm/slab_common.c:335 p9_client_create+0xd4d/0x1190 net/9p/client.c:993 v9fs_session_init+0x1e6/0x13c0 fs/9p/v9fs.c:408 v9fs_mount+0xb9/0xbd0 fs/9p/vfs_super.c:126 legacy_get_tree+0xf1/0x200 fs/fs_context.c:610 vfs_get_tree+0x85/0x2e0 fs/super.c:1530 do_new_mount fs/namespace.c:3040 [inline] path_mount+0x675/0x1d00 fs/namespace.c:3370 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] __se_sys_mount fs/namespace.c:3568 [inline] __x64_sys_mount+0x282/0x300 fs/namespace.c:3568 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff888008880780 which belongs to the cache kernfs_node_cache of size 128 The buggy address is located 112 bytes inside of 128-byte region [ffff888008880780, ffff888008880800) The buggy address belongs to the physical page: page:00000000732833f8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8880 flags: 0x100000000000200(slab|node=0|zone=1) raw: 0100000000000200 0000000000000000 dead000000000122 ffff888001147280 raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888008880680: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888008880700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888008880780: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888008880800: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb ffff888008880880: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ================================================================== Acked-by: Tejun Heo Cc: stable # -rc3 Signed-off-by: Christian A. Ehrhardt Link: https://lore.kernel.org/r/20220913121723.691454-1-lk@c--e.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 7a09c64b7da0abdec3919812e3d93ecc44069ed0 Author: Matthew Ma Date: Fri Oct 14 11:49:51 2022 +0800 mmc: core: Fix kernel panic when remove non-standard SDIO card commit 9972e6b404884adae9eec7463e30d9b3c9a70b18 upstream. SDIO tuple is only allocated for standard SDIO card, especially it causes memory corruption issues when the non-standard SDIO card has removed, which is because the card device's reference counter does not increase for it at sdio_init_func(), but all SDIO card device reference counter gets decreased at sdio_release_func(). Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards") Signed-off-by: Matthew Ma Reviewed-by: Weizhao Ouyang Reviewed-by: John Wang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit ed7f1ff87a4afea1bc220d2ff00a7ce8e61f0b53 Author: Johan Hovold Date: Tue Sep 13 10:53:14 2022 +0200 drm/msm/hdmi: fix memory corruption with too many bridges commit 4c1294da6aed1f16d47a417dcfe6602833c3c95c upstream. Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a3376e3ec81c ("drm/msm: convert to drm_bridge") Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Johan Hovold Tested-by: Kuogee Hsieh Reviewed-by: Kuogee Hsieh Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/502670/ Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar Signed-off-by: Greg Kroah-Hartman commit f649ed0e1b7a1545f8e27267d3c468b3cb222ece Author: Johan Hovold Date: Tue Sep 13 10:53:13 2022 +0200 drm/msm/dsi: fix memory corruption with too many bridges commit 2e786eb2f9cebb07e317226b60054df510b60c65 upstream. Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold Tested-by: Kuogee Hsieh Reviewed-by: Kuogee Hsieh Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/502668/ Link: https://lore.kernel.org/r/20220913085320.8577-4-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar Signed-off-by: Greg Kroah-Hartman commit e7348308f668d3a3aba52cfb4281a8e44d01c698 Author: Miquel Raynal Date: Thu Oct 20 16:25:35 2022 +0200 mac802154: Fix LQI recording commit 5a5c4e06fd03b595542d5590f2bc05a6b7fc5c2b upstream. Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or mac_cb(skb)) without any actual reset of this area prior to its use. As part of a useful rework of the use of this region, 32edc40ae65c ("ieee802154: change _cb handling slightly") introduced mac_cb_init() to basically memset the cb field to 0. In particular, this new function got called at the beginning of mac802154_parse_frame_start(), right before the location where the buffer got actually filled. What went through unnoticed however, is the fact that the very first helper called by device drivers in the receive path already used this area to save the LQI value for later extraction. Resetting the cb field "so late" led to systematically zeroing the LQI. If we consider the reset of the cb field needed, we can make it as soon as we get an skb from a device driver, right before storing the LQI, as is the very first time we need to write something there. Cc: stable@vger.kernel.org Fixes: 32edc40ae65c ("ieee802154: change _cb handling slightly") Signed-off-by: Miquel Raynal Acked-by: Alexander Aring Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman commit 5385af2f89bc352fb70753ab41b2bb036190141f Author: Hyunwoo Kim Date: Thu Oct 20 18:15:44 2022 -0700 fbdev: smscufx: Fix several use-after-free bugs commit cc67482c9e5f2c80d62f623bcc347c29f9f648e1 upstream. Several types of UAFs can occur when physically removing a USB device. Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and in this function, there is kref_put() that finally calls ufx_free(). This fix prevents multiple UAFs. Signed-off-by: Hyunwoo Kim Link: https://lore.kernel.org/linux-fbdev/20221011153436.GA4446@ubuntu/ Cc: Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 07ef3be6cae33947e602cb1a49d4d16d86b4f521 Author: Shreeya Patel Date: Fri Aug 26 17:53:52 2022 +0530 iio: light: tsl2583: Fix module unloading commit 0dec4d2f2636b9e54d9d29f17afc7687c5407f78 upstream. tsl2583 probe() uses devm_iio_device_register() and calling iio_device_unregister() causes the unregister to occur twice. s Switch to iio_device_register() instead of devm_iio_device_register() in probe to avoid the device managed cleanup. Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support") Signed-off-by: Shreeya Patel Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit cb972e6d01efaccdb5ef89eeb6a0ea269719c2be Author: Matti Vaittinen Date: Thu Oct 13 15:04:04 2022 +0300 tools: iio: iio_utils: fix digit calculation commit 72b2aa38191bcba28389b0e20bf6b4f15017ff2b upstream. The iio_utils uses a digit calculation in order to know length of the file name containing a buffer number. The digit calculation does not work for number 0. This leads to allocation of one character too small buffer for the file-name when file name contains value '0'. (Eg. buffer0). Fix digit calculation by returning one digit to be present for number '0'. Fixes: 096f9b862e60 ("tools:iio:iio_utils: implement digit calculation") Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 8f1cd9633d1f21efc13e8fc75be8f2b6bb85e38c Author: Mathias Nyman Date: Mon Oct 24 17:27:20 2022 +0300 xhci: Remove device endpoints from bandwidth list when freeing the device commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki Tested-by: Marek Marczykowski-Górecki Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman commit 914704e0d28376e71d301580cf77ca716f277c72 Author: Tony O'Brien Date: Tue Sep 27 15:47:28 2022 +1300 mtd: rawnand: marvell: Use correct logic for nand-keep-config commit ce107713b722af57c4b7f2477594d445b496420e upstream. Originally the absence of the marvell,nand-keep-config property caused the setup_data_interface function to be provided. However when setup_data_interface was moved into nand_controller_ops the logic was unintentionally inverted. Update the logic so that only if the marvell,nand-keep-config property is present the bootloader NAND config kept. Cc: stable@vger.kernel.org Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") Signed-off-by: Tony O'Brien Signed-off-by: Chris Packham Reviewed-by: Boris Brezillon Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman commit 5d36037b224d67d0bc050feba0f64530166f4aa1 Author: Jens Glathe Date: Mon Oct 24 17:27:17 2022 +0300 usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller commit 4f547472380136718b56064ea5689a61e135f904 upstream. This appears to fix the error: "xhci_hcd
; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman commit 7b7a0d54333c9630d8062f0681848d45412f7542 Author: Justin Chen Date: Wed Oct 5 12:13:55 2022 -0700 usb: bdc: change state when port disconnected commit fb8f60dd1b67520e0e0d7978ef17d015690acfc1 upstream. When port is connected and then disconnected, the state stays as configured. Which is incorrect as the port is no longer configured, but in a not attached state. Signed-off-by: Justin Chen Acked-by: Florian Fainelli Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Cc: stable Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman commit 6827b58a957d8573d02b963310f993555c279502 Author: Thinh Nguyen Date: Tue Oct 25 15:10:20 2022 -0700 usb: dwc3: gadget: Don't set IMI for no_interrupt commit 308c316d16cbad99bb834767382baa693ac42169 upstream. The gadget driver may have a certain expectation of how the request completion flow should be from to its configuration. Make sure the controller driver respect that. That is, don't set IMI (Interrupt on Missed Isoc) when usb_request->no_interrupt is set. Also, the driver should only set IMI to the last TRB of a chain. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Reviewed-by: Jeff Vanhoof Tested-by: Jeff Vanhoof Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman commit 9aa0254303463acd1d4a7ae60c70e197ccb2ee82 Author: Thinh Nguyen Date: Tue Oct 25 15:10:14 2022 -0700 usb: dwc3: gadget: Stop processing more requests on IMI commit f78961f8380b940e0cfc7e549336c21a2ad44f4d upstream. When servicing a transfer completion event, the dwc3 driver will reclaim TRBs of started requests up to the request associated with the interrupt event. Currently we don't check for interrupt due to missed isoc, and the driver may attempt to reclaim TRBs beyond the associated event. This causes invalid memory access when the hardware still owns the TRB. If there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure to stop servicing further. Note that only the last TRB of chained TRBs has its status updated with missed isoc. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Reported-by: Jeff Vanhoof Reported-by: Dan Vacura Signed-off-by: Thinh Nguyen Reviewed-by: Jeff Vanhoof Tested-by: Jeff Vanhoof Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman commit 035dda2bfd7fd21f26675c0b9648f62723e8c264 Author: Hannu Hartikainen Date: Mon Sep 19 20:16:10 2022 +0300 USB: add RESET_RESUME quirk for NVIDIA Jetson devices in RCM commit fc4ade55c617dc73c7e9756b57f3230b4ff24540 upstream. NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen Cc: stable # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman commit e4045fbcd98e83a01fb4eab3867b36726adc556c Author: Jason A. Donenfeld Date: Mon Oct 24 18:29:29 2022 +0200 ALSA: au88x0: use explicitly signed char commit ee03c0f200eb0d9f22dd8732d9fb7956d91019c2 upstream. With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)' sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)' sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned As well, since one function returns errnos, return an `int` rather than a `signed char`. Signed-off-by: Jason A. Donenfeld Cc: Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit d853b4380835f2141e0889e454685228148a3def Author: Steven Rostedt (Google) Date: Wed Oct 26 23:12:36 2022 -0400 ALSA: Use del_timer_sync() before freeing timer commit f0a868788fcbf63cdab51f5adcf73b271ede8164 upstream. The current code for freeing the emux timer is extremely dangerous: CPU0 CPU1 ---- ---- snd_emux_timer_callback() snd_emux_free() spin_lock(&emu->voice_lock) del_timer(&emu->tlist); <-- returns immediately spin_unlock(&emu->voice_lock); [..] kfree(emu); spin_lock(&emu->voice_lock); [BOOM!] Instead just use del_timer_sync() which will wait for the timer to finish before continuing. No need to check if the timer is active or not when doing so. This doesn't fix the race of a possible re-arming of the timer, but at least it won't use the data that has just been freed. [ Fixed unused variable warning by tiwai ] Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steven Rostedt (Google) Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit caea5b20ef9ba2881005119d2ecd9cef789eea50 Author: Anssi Hannula Date: Mon Oct 10 20:52:27 2022 +0200 can: kvaser_usb: Fix possible completions during init_completion commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream. kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson Signed-off-by: Anssi Hannula Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 5437642f91fd6f8df52af4833774b595cdab404f Author: Yang Yingliang Date: Thu Oct 27 17:12:37 2022 +0800 can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb() commit c3c06c61890da80494bb196f75d89b791adda87f upstream. It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. The skb is unlinked from the queue, so it can be freed after spin_unlock_irqrestore(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang Acked-by: Oleksij Rempel Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com Cc: stable@vger.kernel.org [mkl: adjust subject] Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman