commit aa6ca808a46767ba80d92d79d5cfd308f4d71b73 Author: Greg Kroah-Hartman Date: Fri Feb 23 08:42:33 2024 +0100 Linux 5.10.210 Link: https://lore.kernel.org/r/20240221125954.917878865@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: kernelci.org bot Tested-by: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman commit cf5a69e35591954f65f149f3d75492537a605584 Author: Dan Carpenter Date: Fri Jan 26 11:40:37 2024 +0300 PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq() commit b5d1b4b46f856da1473c7ba9a5cdfcb55c9b2478 upstream. The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter Signed-off-by: Bjorn Helgaas Reviewed-by: Niklas Cassel Reviewed-by: Ilpo Järvinen Reviewed-by: Manivannan Sadhasivam Cc: Signed-off-by: Greg Kroah-Hartman commit 9f53d24852ffe2c10c0952bdb64a1772ddbdd58f Author: Florian Fainelli Date: Tue Jun 6 14:43:47 2023 -0700 net: bcmgenet: Fix EEE implementation commit a9f31047baca57d47440c879cf259b86f900260c upstream. We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 9a865a11d6890d4a789db1eaafebdc8bd092b12c Author: Dan Carpenter Date: Fri Nov 3 09:42:51 2023 +0300 netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval() commit c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 upstream. The problem is in nft_byteorder_eval() where we are iterating through a loop and writing to dst[0], dst[1], dst[2] and so on... On each iteration we are writing 8 bytes. But dst[] is an array of u32 so each element only has space for 4 bytes. That means that every iteration overwrites part of the previous element. I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") which is a related issue. I think that the reason we have not detected this bug in testing is that most of time we only write one element. Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion") Signed-off-by: Dan Carpenter Signed-off-by: Pablo Neira Ayuso [Ajay: Modified to apply on v5.10.y] Signed-off-by: Ajay Kaher Signed-off-by: Greg Kroah-Hartman commit 67f386f75637f25df714d57a48f6c94b83573631 Author: Konrad Dybcio Date: Tue Jan 30 18:16:30 2024 +0530 drm/msm/dsi: Enable runtime PM [ Upstream commit 6ab502bc1cf3147ea1d8540d04b83a7a4cb6d1f1 ] Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/543352/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman commit 21b38d85f6dee8e2c6504a70573dc8b112bc7552 Author: Douglas Anderson Date: Tue Jan 30 18:16:29 2024 +0530 PM: runtime: Have devm_pm_runtime_enable() handle pm_runtime_dont_use_autosuspend() [ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ] The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. >From grepping code, it's clear that many people aren't aware of the need to call pm_runtime_dont_use_autosuspend(). When brainstorming solutions, one idea that came up was to leverage the new-ish devm_pm_runtime_enable() function. The idea here is that: * When the devm action is called we know that the driver is being removed. It's the perfect time to undo the use_autosuspend. * The code of pm_runtime_dont_use_autosuspend() already handles the case of being called when autosuspend wasn't enabled. Suggested-by: Laurent Pinchart Signed-off-by: Douglas Anderson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman commit ede393e11819853d20843d01226461c8368273e5 Author: Dmitry Baryshkov Date: Tue Jan 30 18:16:28 2024 +0530 PM: runtime: add devm_pm_runtime_enable helper [ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ] A typical code pattern for pm_runtime_enable() call is to call it in the _probe function and to call pm_runtime_disable() both from _probe error path and from _remove function. For some drivers the whole remove function would consist of the call to pm_remove_disable(). Add helper function to replace this bolierplate piece of code. Calling devm_pm_runtime_enable() removes the need for calling pm_runtime_disable() both in the probe()'s error path and in the remove() function. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org Acked-by: Rafael J. Wysocki Signed-off-by: Stephen Boyd Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman commit a891a0621e725e85529985139cada8cb5a74a116 Author: Mikulas Patocka Date: Tue Jan 9 15:57:56 2024 +0100 dm: limit the number of targets and parameter size area commit bd504bcfec41a503b32054da5472904b404341a4 upstream. The kvmalloc function fails with a warning if the size is larger than INT_MAX. The warning was triggered by a syscall testing robot. In order to avoid the warning, this commit limits the number of targets to 1048576 and the size of the parameter area to 1073741824. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: He Gao Signed-off-by: Greg Kroah-Hartman commit c90746c03b3c41707f7e8518c723f0b69948a264 Author: Ryusuke Konishi Date: Fri Jan 27 01:41:14 2023 +0900 nilfs2: replace WARN_ONs for invalid DAT metadata block requests commit 5124a0a549857c4b87173280e192eea24dea72ad upstream. If DAT metadata file block access fails due to corruption of the DAT file or abnormal virtual block numbers held by b-trees or inodes, a kernel warning is generated. This replaces the WARN_ONs by error output, so that a kernel, booted with panic_on_warn, does not panic. This patch also replaces the detected return code -ENOENT with another internal code -EINVAL to notify the bmap layer of metadata corruption. When the bmap layer sees -EINVAL, it handles the abnormal situation with nilfs_bmap_convert_error() and finally returns code -EIO as it should. Link: https://lkml.kernel.org/r/0000000000005cc3d205ea23ddcf@google.com Link: https://lkml.kernel.org/r/20230126164114.6911-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: Tested-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit f3e4963566f58726d3265a727116a42b591f6596 Author: Ryusuke Konishi Date: Sun Feb 4 01:16:45 2024 +0900 nilfs2: fix potential bug in end_buffer_async_write commit 5bc09b397cbf1221f8a8aacb1152650c9195b02b upstream. According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer. Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit db896bbe4a9c67cee377e5f6a743350d3ae4acf6 Author: Linus Torvalds Date: Sun Feb 4 15:25:12 2024 +0000 sched/membarrier: reduce the ability to hammer on sys_membarrier commit 944d5fe50f3f03daacfea16300e656a1691c4a23 upstream. On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. Reviewed-and-tested-by: Mathieu Desnoyers Acked-by: Borislav Petkov Fixes: 22e4ebb97582 ("membarrier: Provide expedited private command") Fixes: c5f58bd58f43 ("membarrier: Provide GLOBAL_EXPEDITED command") Signed-off-by: Linus Torvalds [ converted to explicit mutex_*() calls - cleanup.h is not in this stable branch - gregkh ] Signed-off-by: Greg Kroah-Hartman commit 8f8f185643747fbb448de6aab0efa51c679909a3 Author: Eric Dumazet Date: Tue Dec 12 16:46:21 2023 +0000 net: prevent mss overflow in skb_segment() commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 upstream. Once again syzbot is able to crash the kernel in skb_segment() [1] GSO_BY_FRAGS is a forbidden value, but unfortunately the following computation in skb_segment() can reach it quite easily : mss = mss * partial_segs; 65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to a bad final result. Make sure to limit segmentation so that the new mss value is smaller than GSO_BY_FRAGS. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626 __dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f8692032aa9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9 RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480 R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003 Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Signed-off-by: Eric Dumazet Cc: Marcelo Ricardo Leitner Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit f7e0231eeaa33245c649fac0303cf97209605446 Author: Xiang Yang Date: Mon Feb 19 21:21:53 2024 +0800 Revert "arm64: Stash shadow stack pointer in the task struct on interrupt" This reverts commit 3f225f29c69c13ce1cbdb1d607a42efeef080056 which is commit 59b37fe52f49955791a460752c37145f1afdcad1 upstream. The shadow call stack for irq now is stored in current task's thread info in irq_stack_entry. There is a possibility that we have some soft irqs pending at the end of hard irq, and when we process softirq with the irq enabled, irq_stack_entry will enter again and overwrite the shadow call stack whitch stored in current task's thread info, leading to the incorrect shadow call stack restoration for the first entry of the hard IRQ, then the system end up with a panic. task A | task A -------------------------------------+------------------------------------ el1_irq //irq1 enter | irq_handler //save scs_sp1 | gic_handle_irq | irq_exit | __do_softirq | | el1_irq //irq2 enter | irq_handler //save scs_sp2 | //overwrite scs_sp1 | ... | irq_stack_exit //restore scs_sp2 irq_stack_exit //restore wrong | //scs_sp2 | So revert this commit to fix it. Fixes: 3f225f29c69c ("arm64: Stash shadow stack pointer in the task struct on interrupt") Signed-off-by: Xiang Yang Acked-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman commit 70ca0dbae4e9267c922d85dd87a889d55dd25962 Author: Davidlohr Bueso Date: Mon Jan 23 09:32:06 2023 -0800 hrtimer: Ignore slack time for RT tasks in schedule_hrtimeout_range() commit 0c52310f260014d95c1310364379772cb74cf82d upstream. While in theory the timer can be triggered before expires + delta, for the cases of RT tasks they really have no business giving any lenience for extra slack time, so override any passed value by the user and always use zero for schedule_hrtimeout_range() calls. Furthermore, this is similar to what the nanosleep(2) family already does with current->timer_slack_ns. Signed-off-by: Davidlohr Bueso Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20230123173206.6764-3-dave@stgolabs.net Signed-off-by: Felix Moessbauer Signed-off-by: Greg Kroah-Hartman commit c80ddc10927f87e9efad0a793b88f71c15470572 Author: Jozsef Kadlecsik Date: Sun Feb 4 16:26:42 2024 +0100 netfilter: ipset: Missing gc cancellations fixed commit 27c5a095e2518975e20a10102908ae8231699879 upstream. The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression in swap operation") missed to add the calls to gc cancellations at the error path of create operations and at module unload. Also, because the half of the destroy operations now executed by a function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex or rcu read lock is held and therefore the checking of them results false warnings. Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation") Reported-by: syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com Reported-by: Brad Spengler Reported-by: Стас Ничипорович Tested-by: Brad Spengler Tested-by: Стас Ничипорович Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit a24d5f2ac8ef702a58e55ec276aad29b4bd97e05 Author: Jozsef Kadlecsik Date: Mon Jan 29 10:57:01 2024 +0100 netfilter: ipset: fix performance regression in swap operation commit 97f7cf1cd80eeed3b7c808b7c12463295c751001 upstream. The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback. Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/ Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test") Reported-by: Ale Crismani Reported-by: David Wang <00107082@163.com> Tested-by: David Wang <00107082@163.com> Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 583a6c76b9498ea08948aeb9558a492b470dfa0f Author: Carlos Llamas Date: Fri Sep 29 03:48:17 2023 +0000 scripts/decode_stacktrace.sh: optionally use LLVM utilities [ Upstream commit efbd6398353315b7018e6943e41fee9ec35e875f ] GNU's addr2line can have problems parsing a vmlinux built with LLVM, particularly when LTO was used. In order to decode the traces correctly this patch adds the ability to switch to LLVM's utilities readelf and addr2line. The same approach is followed by Will in [1]. Before: $ scripts/decode_stacktrace.sh vmlinux < kernel.log [17716.240635] Call trace: [17716.240646] skb_cow_data (??:?) [17716.240654] esp6_input (ld-temp.o:?) [17716.240666] xfrm_input (ld-temp.o:?) [17716.240674] xfrm6_rcv (??:?) [...] After: $ LLVM=1 scripts/decode_stacktrace.sh vmlinux < kernel.log [17716.240635] Call trace: [17716.240646] skb_cow_data (include/linux/skbuff.h:2172 net/core/skbuff.c:4503) [17716.240654] esp6_input (net/ipv6/esp6.c:977) [17716.240666] xfrm_input (net/xfrm/xfrm_input.c:659) [17716.240674] xfrm6_rcv (net/ipv6/xfrm6_input.c:172) [...] Note that one could set CROSS_COMPILE=llvm- instead to hack around this issue. However, doing so can break the decodecode routine as it will force the selection of other LLVM utilities down the line e.g. llvm-as. [1] https://lore.kernel.org/all/20230914131225.13415-3-will@kernel.org/ Link: https://lkml.kernel.org/r/20230929034836.403735-1-cmllamas@google.com Signed-off-by: Carlos Llamas Reviewed-by: Nick Desaulniers Reviewed-by: Elliot Berman Tested-by: Justin Stitt Cc: Will Deacon Cc: John Stultz Cc: Masahiro Yamada Cc: Nathan Chancellor Cc: Tom Rix Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 0f906882eba54874fdbd69eaa946efbf3e045a22 Author: Miguel Ojeda Date: Sun Dec 5 19:00:43 2021 +0100 scripts: decode_stacktrace: demangle Rust symbols [ Upstream commit 99115db4ecc87af73415939439ec604ea0531e6f ] Recent versions of both Binutils (`c++filt`) and LLVM (`llvm-cxxfilt`) provide Rust v0 mangling support. Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Co-developed-by: Alex Gaynor Signed-off-by: Alex Gaynor Co-developed-by: Wedson Almeida Filho Signed-off-by: Wedson Almeida Filho Signed-off-by: Miguel Ojeda Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities") Signed-off-by: Sasha Levin commit a3d71b6ae935b0343f191be610cd1e5518bfbf99 Author: Schspa Shi Date: Fri Apr 29 14:37:57 2022 -0700 scripts/decode_stacktrace.sh: support old bash version [ Upstream commit 3af8acf6aff2a98731522b52927429760f0b8006 ] Old bash version don't support associative array variables. Avoid to use associative array variables to avoid error. Without this, old bash version will report error as fellowing [ 15.954042] Kernel panic - not syncing: sysrq triggered crash [ 15.955252] CPU: 1 PID: 167 Comm: sh Not tainted 5.18.0-rc1-00208-gb7d075db2fd5 #4 [ 15.956472] Hardware name: Hobot J5 Virtual development board (DT) [ 15.957856] Call trace: ./scripts/decode_stacktrace.sh: line 128: ,dump_backtrace: syntax error: operand expected (error token is ",dump_backtrace") Link: https://lkml.kernel.org/r/20220409180331.24047-1-schspa@gmail.com Signed-off-by: Schspa Shi Cc: Stephen Boyd Signed-off-by: Andrew Morton Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities") Signed-off-by: Sasha Levin commit ae992f14b1176293c0998cc241c721b694aa4b67 Author: Stephen Boyd Date: Wed Jul 7 18:09:35 2021 -0700 scripts/decode_stacktrace.sh: silence stderr messages from addr2line/nm [ Upstream commit 5bf0f3bc377e5f87bfd61ccc9c1efb3c6261f2c3 ] Sometimes if you're using tools that have linked things improperly or have new features/sections that older tools don't expect you'll see warnings printed to stderr. We don't really care about these warnings, so let's just silence these messages to cleanup output of this script. Link: https://lkml.kernel.org/r/20210511003845.2429846-10-swboyd@chromium.org Signed-off-by: Stephen Boyd Cc: Jiri Olsa Cc: Alexei Starovoitov Cc: Jessica Yu Cc: Evan Green Cc: Hsin-Yi Wang Cc: Konstantin Khlebnikov Cc: Sasha Levin Cc: Andy Shevchenko Cc: Baoquan He Cc: Borislav Petkov Cc: Catalin Marinas Cc: Dave Young Cc: Ingo Molnar Cc: Matthew Wilcox Cc: Petr Mladek Cc: Rasmus Villemoes Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Vivek Goyal Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: efbd63983533 ("scripts/decode_stacktrace.sh: optionally use LLVM utilities") Signed-off-by: Sasha Levin commit 00f09825e14cac99e1c9d9295538b8c74174665b Author: Lino Sanfilippo Date: Wed Jan 3 07:18:18 2024 +0100 serial: 8250_exar: Set missing rs485_supported flag [ Upstream commit 0c2a5f471ce58bca8f8ab5fcb911aff91eaaa5eb ] The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: Reviewed-by: Ilpo Järvinen Signed-off-by: Lino Sanfilippo Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 84bf7b87594d6b48d4595882f52267821cd50f3e Author: Ilpo Järvinen Date: Mon Jun 6 13:04:04 2022 +0300 serial: 8250_exar: Fill in rs485_supported [ Upstream commit 59c221f8e1269278161313048c71929c9950b2c4 ] Add information on supported serial_rs485 features. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220606100433.13793-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 0c2a5f471ce5 ("serial: 8250_exar: Set missing rs485_supported flag") Signed-off-by: Sasha Levin commit dfd8b9d26b8b7289c101cb2e06698d0bc89cf72c Author: Ilpo Järvinen Date: Mon Jun 6 13:04:00 2022 +0300 serial: Add rs485_supported to uart_port [ Upstream commit 8925c31c1ac2f1e05da988581f2a70a2a8c4d638 ] Preparing to move serial_rs485 struct sanitization into serial core, each driver has to provide what fields/flags it supports. This information is pointed into by rs485_supported. Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220606100433.13793-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 0c2a5f471ce5 ("serial: 8250_exar: Set missing rs485_supported flag") Signed-off-by: Sasha Levin commit 0c3687822259a7628c85cd21a3445cbe3c367165 Author: Tianjia Zhang Date: Thu Dec 14 11:08:34 2023 +0800 crypto: lib/mpi - Fix unexpected pointer access in mpi_ec_init [ Upstream commit ba3c5574203034781ac4231acf117da917efcd2a ] When the mpi_ec_ctx structure is initialized, some fields are not cleared, causing a crash when referencing the field when the structure was released. Initially, this issue was ignored because memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag. For example, this error will be triggered when calculating the Za value for SM2 separately. Fixes: d58bb7e55a8a ("lib/mpi: Introduce ec implementation to MPI library") Cc: stable@vger.kernel.org # v6.5 Signed-off-by: Tianjia Zhang Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit e0d2eeec88ae131d001aae5cf0905dc7fd3834b4 Author: Serge Semin Date: Sat Dec 2 14:14:20 2023 +0300 mips: Fix max_mapnr being uninitialized on early stages [ Upstream commit e1a9ae45736989c972a8d1c151bc390678ae6205 ] max_mapnr variable is utilized in the pfn_valid() method in order to determine the upper PFN space boundary. Having it uninitialized effectively makes any PFN passed to that method invalid. That in its turn causes the kernel mm-subsystem occasion malfunctions even after the max_mapnr variable is actually properly updated. For instance, pfn_valid() is called in the init_unavailable_range() method in the framework of the calls-chain on MIPS: setup_arch() +-> paging_init() +-> free_area_init() +-> memmap_init() +-> memmap_init_zone_range() +-> init_unavailable_range() Since pfn_valid() always returns "false" value before max_mapnr is initialized in the mem_init() method, any flatmem page-holes will be left in the poisoned/uninitialized state including the IO-memory pages. Thus any further attempts to map/remap the IO-memory by using MMU may fail. In particular it happened in my case on attempt to map the SRAM region. The kernel bootup procedure just crashed on the unhandled unaligned access bug raised in the __update_cache() method: > Unhandled kernel unaligned access[#1]: > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056 > ... > Call Trace: > [<8011ef9c>] __update_cache+0x88/0x1bc > [<80385944>] ioremap_page_range+0x110/0x2a4 > [<80126948>] ioremap_prot+0x17c/0x1f4 > [<80711b80>] __devm_ioremap+0x8c/0x120 > [<80711e0c>] __devm_ioremap_resource+0xf4/0x218 > [<808bf244>] sram_probe+0x4f4/0x930 > [<80889d20>] platform_probe+0x68/0xec > ... Let's fix the problem by initializing the max_mapnr variable as soon as the required data is available. In particular it can be done right in the paging_init() method before free_area_init() is called since all the PFN zone boundaries have already been calculated by that time. Cc: stable@vger.kernel.org Signed-off-by: Serge Semin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 41a4bd51d87c1e53add710c693adb8aa3abb051d Author: Niklas Cassel Date: Tue Nov 28 14:22:30 2023 +0100 PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support [ Upstream commit 2217fffcd63f86776c985d42e76daa43a56abdf1 ] Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to support iATUs which require a specific alignment. However, this support cannot have been properly tested. The whole point is for the iATU to map an address that is aligned, using dw_pcie_ep_map_addr(), and then let the writel() write to ep->msi_mem + aligned_offset. Thus, modify the address that is mapped such that it is aligned. With this change, dw_pcie_ep_raise_msix_irq() matches the logic in dw_pcie_ep_raise_msi_irq(). Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I Signed-off-by: Sasha Levin commit ff67f77fb0fc2cfe213d22e7dbcf43528ae358c1 Author: Sjoerd Simons Date: Tue Nov 28 22:35:05 2023 +0100 bus: moxtet: Add spi device table [ Upstream commit aaafe88d5500ba18b33be72458439367ef878788 ] The moxtet module fails to auto-load on. Add a SPI id table to allow it to do so. Signed-off-by: Sjoerd Simons Cc: Reviewed-by: Marek Behún Signed-off-by: Gregory CLEMENT Signed-off-by: Sasha Levin commit 88ec9bbcd33c21d30becd9d2949e8158f47660cd Author: Junxiao Bi Date: Wed Nov 8 10:22:16 2023 -0800 Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d" [ Upstream commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d ] This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74. That commit introduced the following race and can cause system hung. md_write_start: raid5d: // mddev->in_sync == 1 set "MD_SB_CHANGE_PENDING" // running before md_write_start wakeup it waiting "MD_SB_CHANGE_PENDING" cleared >>>>>>>>> hung wakeup mddev->thread ... waiting "MD_SB_CHANGE_PENDING" cleared >>>> hung, raid5d should clear this flag but get hung by same flag. The issue reverted commit fixing is fixed by last patch in a new way. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi Reviewed-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Sasha Levin commit 6a42eb0d217061cb8b25c4dbcb85729e4384a929 Author: Steven Rostedt (Google) Date: Wed Feb 14 11:20:46 2024 -0500 tracing: Inform kmemleak of saved_cmdlines allocation commit 2394ac4145ea91b92271e675a09af2a9ea6840b7 upstream. The allocation of the struct saved_cmdlines_buffer structure changed from: s = kmalloc(sizeof(*s), GFP_KERNEL); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); to: orig_size = sizeof(*s) + val * TASK_COMM_LEN; order = get_order(orig_size); size = 1 << (order + PAGE_SHIFT); page = alloc_pages(GFP_KERNEL, order); if (!page) return NULL; s = page_address(page); memset(s, 0, sizeof(*s)); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); Where that s->saved_cmdlines allocation looks to be a dangling allocation to kmemleak. That's because kmemleak only keeps track of kmalloc() allocations. For allocations that use page_alloc() directly, the kmemleak needs to be explicitly informed about it. Add kmemleak_alloc() and kmemleak_free() around the page allocation so that it doesn't give the following false positive: unreferenced object 0xffff8881010c8000 (size 32760): comm "swapper", pid 0, jiffies 4294667296 hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace (crc ae6ec1b9): [] kmemleak_alloc+0x45/0x80 [] __kmalloc_large_node+0x10d/0x190 [] __kmalloc+0x3b1/0x4c0 [] allocate_cmdlines_buffer+0x113/0x230 [] tracer_alloc_buffers.isra.0+0x124/0x460 [] early_trace_init+0x14/0xa0 [] start_kernel+0x12e/0x3c0 [] x86_64_start_reservations+0x18/0x30 [] x86_64_start_kernel+0x7b/0x80 [] secondary_startup_64_no_verify+0x15e/0x16b Link: https://lore.kernel.org/linux-trace-kernel/87r0hfnr9r.fsf@kernel.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240214112046.09a322d6@gandalf.local.home Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Catalin Marinas Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic") Reported-by: Kalle Valo Tested-by: Kalle Valo Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 3a6e27dbe2fe39501b023ae0c44961a3a060c597 Author: Konrad Dybcio Date: Wed Dec 27 16:21:24 2023 +0100 pmdomain: core: Move the unused cleanup to a _sync initcall commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream. The unused clock cleanup uses the _sync initcall to give all users at earlier initcalls time to probe. Do the same to avoid leaving some PDs dangling at "on" (which actually happened on qcom!). Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains") Signed-off-by: Konrad Dybcio Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 978e50ef8c38dc71bd14d1b0143d554ff5d188ba Author: Oleksij Rempel Date: Fri Oct 20 15:38:14 2023 +0200 can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER) commit efe7cf828039aedb297c1f9920b638fffee6aabc upstream. Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Reported-by: Sili Luo Suggested-by: Sili Luo Acked-by: Oleksij Rempel Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit e4a6d3acaddb87a7dfea468dfbe7bfbbaa656228 Author: Nuno Sa Date: Tue Jan 23 16:14:22 2024 +0100 of: property: fix typo in io-channels commit 8f7e917907385e112a845d668ae2832f41e64bf5 upstream. The property is io-channels and not io-channel. This was effectively preventing the devlink creation. Fixes: 8e12257dead7 ("of: property: Add device link support for iommus, mboxes and io-channels") Cc: stable@vger.kernel.org Signed-off-by: Nuno Sa Reviewed-by: Saravana Kannan Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240123-iio-backend-v7-1-1bff236b8693@analog.com Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman commit 8180d0c27b93a6eb60da1b08ea079e3926328214 Author: Rishabh Dave Date: Thu Feb 1 17:07:16 2024 +0530 ceph: prevent use-after-free in encode_cap_msg() commit cda4672da1c26835dcbd7aec2bfed954eda9b5ef upstream. In fs/ceph/caps.c, in encode_cap_msg(), "use after free" error was caught by KASAN at this line - 'ceph_buffer_get(arg->xattr_buf);'. This implies before the refcount could be increment here, it was freed. In same file, in "handle_cap_grant()" refcount is decremented by this line - 'ceph_buffer_put(ci->i_xattrs.blob);'. It appears that a race occurred and resource was freed by the latter line before the former line could increment it. encode_cap_msg() is called by __send_cap() and __send_cap() is called by ceph_check_caps() after calling __prep_cap(). __prep_cap() is where arg->xattr_buf is assigned to ci->i_xattrs.blob. This is the spot where the refcount must be increased to prevent "use after free" error. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/59259 Signed-off-by: Rishabh Dave Reviewed-by: Jeff Layton Reviewed-by: Xiubo Li Signed-off-by: Ilya Dryomov Signed-off-by: Greg Kroah-Hartman commit 2e9506c9e0b941c6e46e78df28ace6b173c23a56 Author: Alexandra Winter Date: Tue Feb 6 09:58:49 2024 +0100 s390/qeth: Fix potential loss of L3-IP@ in case of network issues commit 2fe8a236436fe40d8d26a1af8d150fc80f04ee1a upstream. Symptom: In case of a bad cable connection (e.g. dirty optics) a fast sequence of network DOWN-UP-DOWN-UP could happen. UP triggers recovery of the qeth interface. In case of a second DOWN while recovery is still ongoing, it can happen that the IP@ of a Layer3 qeth interface is lost and will not be recovered by the second UP. Problem: When registration of IP addresses with Layer 3 qeth devices fails, (e.g. because of bad address format) the respective IP address is deleted from its hash-table in the driver. If registration fails because of a ENETDOWN condition, the address should stay in the hashtable, so a subsequent recovery can restore it. 3caa4af834df ("qeth: keep ip-address after LAN_OFFLINE failure") fixes this for registration failures during normal operation, but not during recovery. Solution: Keep L3-IP address in case of ENETDOWN in qeth_l3_recover_ip(). For consistency with qeth_l3_add_ip() we also keep it in case of EADDRINUSE, i.e. for some reason the card already/still has this address registered. Fixes: 4a71df50047f ("qeth: new qeth device driver") Cc: stable@vger.kernel.org Signed-off-by: Alexandra Winter Link: https://lore.kernel.org/r/20240206085849.2902775-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 888679afbfc2a071785b75ac5b02d5f3bee8de2a Author: Marc Zyngier Date: Tue Feb 13 10:12:06 2024 +0000 irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update commit af9acbfc2c4b72c378d0b9a2ee023ed01055d3e2 upstream. When updating the affinity of a VPE, the VMOVP command is currently skipped if the two CPUs are part of the same VPE affinity. But this is wrong, as the doorbell corresponding to this VPE is still delivered on the 'old' CPU, which screws up the balancing. Furthermore, offlining that 'old' CPU results in doorbell interrupts generated for this VPE being discarded. The harsh reality is that VMOVP cannot be elided when a set_affinity() request occurs. It needs to be obeyed, and if an optimisation is to be made, it is at the point where the affinity change request is made (such as in KVM). Drop the VMOVP elision altogether, and only use the vpe_table_mask to try and stay within the same ITS affinity group if at all possible. Fixes: dd3f050a216e (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP) Reported-by: Kunkun Jiang Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org Signed-off-by: Greg Kroah-Hartman commit 2809645d8ae266e74279ac3e48b00a2d36985437 Author: Doug Berger Date: Fri Feb 9 17:24:49 2024 -0800 irqchip/irq-brcmstb-l2: Add write memory barrier before exit commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream. It was observed on Broadcom devices that use GIC v3 architecture L1 interrupt controllers as the parent of brcmstb-l2 interrupt controllers that the deactivation of the parent interrupt could happen before the brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the interrupt only to find that no L2 interrupt was pending. The result was a spurious interrupt invoking handle_bad_irq() with its associated messaging. While this did not create a functional problem it is a waste of cycles. The hazard exists because the memory mapped bus writes to the brcmstb-l2 registers are buffered and the GIC v3 architecture uses a very efficient system register write to deactivate the interrupt. Add a write memory barrier prior to invoking chained_irq_exit() to introduce a dsb(st) on those systems to ensure the system register write cannot be executed until the memory mapped writes are visible to the system. [ florian: Added Fixes tag ] Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli Signed-off-by: Thomas Gleixner Acked-by: Florian Fainelli Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman commit 45a3657c3faece4dff7a21546b9d2331cdfec57e Author: Johannes Berg Date: Wed Jan 31 16:49:10 2024 +0100 wifi: mac80211: reload info pointer in ieee80211_tx_dequeue() commit c98d8836b817d11fdff4ca7749cbbe04ff7f0c64 upstream. This pointer can change here since the SKB can change, so we actually later open-coded IEEE80211_SKB_CB() again. Reload the pointer where needed, so the monitor-mode case using it gets fixed, and then use info-> later as well. Cc: stable@vger.kernel.org Fixes: 531682159092 ("mac80211: fix VLAN handling with TXQs") Link: https://msgid.link/20240131164910.b54c28d583bc.I29450cec84ea6773cff5d9c16ff92b836c331471@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit c7fa9590a9b2816cf114e1ab0664dc67a036a599 Author: Daniel de Villiers Date: Fri Feb 2 13:37:18 2024 +0200 nfp: flower: prevent re-adding mac index for bonded port commit 1a1c13303ff6d64e6f718dc8aa614e580ca8d9b4 upstream. When physical ports are reset (either through link failure or manually toggled down and up again) that are slaved to a Linux bond with a tunnel endpoint IP address on the bond device, not all tunnel packets arriving on the bond port are decapped as expected. The bond dev assigns the same MAC address to itself and each of its slaves. When toggling a slave device, the same MAC address is therefore offloaded to the NFP multiple times with different indexes. The issue only occurs when re-adding the shared mac. The nfp_tunnel_add_shared_mac() function has a conditional check early on that checks if a mac entry already exists and if that mac entry is global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the case of a bonded device (For example br-ex), the mac index is obtained, and no new index is assigned. We therefore modify the conditional in nfp_tunnel_add_shared_mac() to check if the port belongs to the LAG along with the existing checks to prevent a new global mac index from being re-assigned to the slave port. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Daniel de Villiers Signed-off-by: Louis Peens Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 962091c40813ac533ba303948b95b4d28619e778 Author: Daniel Basilio Date: Fri Feb 2 13:37:17 2024 +0200 nfp: use correct macro for LengthSelect in BAR config commit b3d4f7f2288901ed2392695919b3c0e24c1b4084 upstream. The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio Signed-off-by: Louis Peens Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 58054faf3bd29cd0b949b77efcb6157f66f401ed Author: Kim Phillips Date: Thu Jan 25 17:12:53 2024 -0600 crypto: ccp - Fix null pointer dereference in __sev_platform_shutdown_locked commit ccb88e9549e7cfd8bcd511c538f437e20026e983 upstream. The SEV platform device can be shutdown with a null psp_master, e.g., using DEBUG_TEST_DRIVER_REMOVE. Found using KASAN: [ 137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002) [ 137.162647] ccp 0000:23:00.1: no command queues available [ 137.170598] ccp 0000:23:00.1: sev enabled [ 137.174645] ccp 0000:23:00.1: psp enabled [ 137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI [ 137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7] [ 137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ #311 [ 137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c [ 137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216 [ 137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e [ 137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0 [ 137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66 [ 137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28 [ 137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8 [ 137.182693] FS: 0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000 [ 137.182693] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0 [ 137.182693] Call Trace: [ 137.182693] [ 137.182693] ? show_regs+0x6c/0x80 [ 137.182693] ? __die_body+0x24/0x70 [ 137.182693] ? die_addr+0x4b/0x80 [ 137.182693] ? exc_general_protection+0x126/0x230 [ 137.182693] ? asm_exc_general_protection+0x2b/0x30 [ 137.182693] ? __sev_platform_shutdown_locked+0x51/0x180 [ 137.182693] sev_firmware_shutdown.isra.0+0x1e/0x80 [ 137.182693] sev_dev_destroy+0x49/0x100 [ 137.182693] psp_dev_destroy+0x47/0xb0 [ 137.182693] sp_destroy+0xbb/0x240 [ 137.182693] sp_pci_remove+0x45/0x60 [ 137.182693] pci_device_remove+0xaa/0x1d0 [ 137.182693] device_remove+0xc7/0x170 [ 137.182693] really_probe+0x374/0xbe0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] __driver_probe_device+0x199/0x460 [ 137.182693] driver_probe_device+0x4e/0xd0 [ 137.182693] __driver_attach+0x191/0x3d0 [ 137.182693] ? __pfx___driver_attach+0x10/0x10 [ 137.182693] bus_for_each_dev+0x100/0x190 [ 137.182693] ? __pfx_bus_for_each_dev+0x10/0x10 [ 137.182693] ? __kasan_check_read+0x15/0x20 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? _raw_spin_unlock+0x27/0x50 [ 137.182693] driver_attach+0x41/0x60 [ 137.182693] bus_add_driver+0x2a8/0x580 [ 137.182693] driver_register+0x141/0x480 [ 137.182693] __pci_register_driver+0x1d6/0x2a0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? esrt_sysfs_init+0x1cd/0x5d0 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] sp_pci_init+0x22/0x30 [ 137.182693] sp_mod_init+0x14/0x30 [ 137.182693] ? __pfx_sp_mod_init+0x10/0x10 [ 137.182693] do_one_initcall+0xd1/0x470 [ 137.182693] ? __pfx_do_one_initcall+0x10/0x10 [ 137.182693] ? parameq+0x80/0xf0 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] ? __kmalloc+0x3b0/0x4e0 [ 137.182693] ? kernel_init_freeable+0x92d/0x1050 [ 137.182693] ? kasan_populate_vmalloc_pte+0x171/0x190 [ 137.182693] ? srso_return_thunk+0x5/0x5f [ 137.182693] kernel_init_freeable+0xa64/0x1050 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] kernel_init+0x24/0x160 [ 137.182693] ? __switch_to_asm+0x3e/0x70 [ 137.182693] ret_from_fork+0x40/0x80 [ 137.182693] ? __pfx_kernel_init+0x10/0x10 [ 137.182693] ret_from_fork_asm+0x1b/0x30 [ 137.182693] [ 137.182693] Modules linked in: [ 137.538483] ---[ end trace 0000000000000000 ]--- Fixes: 1b05ece0c931 ("crypto: ccp - During shutdown, check SEV data pointer before using") Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello Signed-off-by: Kim Phillips Reviewed-by: Liam Merwick Acked-by: John Allen Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 98a4026b22ff440c7f47056481bcbbe442f607d6 Author: Ryusuke Konishi Date: Wed Jan 31 23:56:57 2024 +0900 nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() commit 38296afe3c6ee07319e01bb249aa4bb47c07b534 upstream. Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device. Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it") Signed-off-by: Ryusuke Konishi Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 364a66be2abdcd4fd426ffa44d9b8f40aafb3caa Author: Ryusuke Konishi Date: Wed Jan 24 21:19:36 2024 +0900 nilfs2: fix data corruption in dsync block recovery for small block sizes commit 67b8bcbaed4777871bb0dcc888fb02a614a98ab1 upstream. The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page. Link: https://lkml.kernel.org/r/20240124121936.10575-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit a643d8d179479886786e11cac799fd11996da98a Author: bo liu Date: Mon Feb 5 09:38:02 2024 +0800 ALSA: hda/conexant: Add quirk for SWS JS201D commit 4639c5021029d49fd2f97fa8d74731f167f98919 upstream. The SWS JS201D need a different pinconfig from windows driver. Add a quirk to use a specific pinconfig to SWS JS201D. Signed-off-by: bo liu Cc: Link: https://lore.kernel.org/r/20240205013802.51907-1-bo.liu@senarytech.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit ca0533fe6650711627929ed50b12b9a57dd81ea1 Author: Alexander Stein Date: Tue Feb 6 09:39:12 2024 +0100 mmc: slot-gpio: Allow non-sleeping GPIO ro commit cc9432c4fb159a3913e0ce3173b8218cd5bad2e0 upstream. This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit bdc29f9ca3b1f8fffac409d18a9416ea08d7c956 Author: Steve Wahl Date: Fri Jan 26 10:48:41 2024 -0600 x86/mm/ident_map: Use gbpages only where full GB page should be mapped. commit d794734c9bbfe22f86686dc2909c25f5ffe1a572 upstream. When ident_pud_init() uses only gbpages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. On UV systems, this ends up including regions that will cause hardware to halt the system if accessed (these are marked "reserved" by BIOS). Even processor speculation into these regions is enough to trigger the system halt. Only use gbpages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full gbpage. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. [ dhansen: fix up comment formatting, simplifty changelog ] Signed-off-by: Steve Wahl Signed-off-by: Dave Hansen Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com Signed-off-by: Greg Kroah-Hartman commit 09f21bee5b02501276cabe6db21be642a2518fe9 Author: Aleksander Mazur Date: Tue Jan 23 14:43:00 2024 +0100 x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6 commit f6a1892585cd19e63c4ef2334e26cd536d5b678d upstream. The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows the following error message: This kernel requires an i686 CPU, but only detected an i586 CPU. Unable to boot - please use a kernel appropriate for your CPU. Remove MCRUSOE from the condition introduced in commit in Fixes, effectively changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the CPU family given by CPUID. [ bp: Massage commit message. ] Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig") Signed-off-by: Aleksander Mazur Signed-off-by: Borislav Petkov (AMD) Acked-by: H. Peter Anvin Cc: Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl Signed-off-by: Greg Kroah-Hartman commit 1a8a72ee17e43a9d7966c2d8bf1f15ac0dff27f6 Author: Hugo Villeneuve Date: Tue Jan 16 16:29:59 2024 -0500 serial: max310x: improve crystal stable clock detection commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream. Some people are seeing a warning similar to this when using a crystal: max310x 11-006c: clock is not stable yet The datasheet doesn't mention the maximum time to wait for the clock to be stable when using a crystal, and it seems that the 10ms delay in the driver is not always sufficient. Jan Kundrát reported that it took three tries (each separated by 10ms) to get a stable clock. Modify behavior to check stable clock ready bit multiple times (20), and waiting 10ms between each try. Note: the first draft of the driver originally used a 50ms delay, without checking the clock stable bit. Then a loop with 1000 retries was implemented, each time reading the clock stable bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát Link: https://www.spinics.net/lists/linux-serial/msg35773.html Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman commit 6f248ee7aade38af957f4476b9086b0d14c81902 Author: Hugo Villeneuve Date: Tue Jan 16 16:29:58 2024 -0500 serial: max310x: set default value when reading clock ready bit commit 0419373333c2f2024966d36261fd82a453281e80 upstream. If regmap_read() returns a non-zero value, the 'val' variable can be left uninitialized. Clear it before calling regmap_read() to make sure we properly detect the clock ready bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman commit 92a0a5d613762a96f0f97c36f448ff7cdba8b2f3 Author: Vincent Donnefort Date: Wed Jan 31 14:09:55 2024 +0000 ring-buffer: Clean ring_buffer_poll_wait() error return commit 66bbea9ed6446b8471d365a22734dc00556c4785 upstream. The return type for ring_buffer_poll_wait() is __poll_t. This is behind the scenes an unsigned where we can set event bits. In case of a non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us, this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so user-space at least is aware something went wrong. Nonetheless, this is an incorrect code. Replace that -EINVAL with a proper EPOLLERR to clean that output. As this doesn't change the behaviour, there's no need to treat this change as a bug fix. Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com Cc: stable@vger.kernel.org Fixes: 6721cb6002262 ("ring-buffer: Do not poll non allocated cpu buffers") Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 9ec807e7b6f5fcf9499f3baa69f254bb239a847f Author: Souradeep Chakrabarti Date: Tue Jan 30 23:35:51 2024 -0800 hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove commit e0526ec5360a48ad3ab2e26e802b0532302a7e11 upstream. In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by: Souradeep Chakrabarti Reviewed-by: Dexuan Cui Reviewed-by: Haiyang Zhang Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 93d8109bf182510629bbefc8cd45296d2393987f Author: Sean Young Date: Thu Apr 13 10:50:32 2023 +0200 media: rc: bpf attach/detach requires write permission commit 6a9d552483d50953320b9d3b57abdee8d436f23f upstream. Note that bpf attach/detach also requires CAP_NET_ADMIN. Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman commit a98ccbcddbb5735710fb051005b09e9e8639f1de Author: Mario Limonciello Date: Wed Jan 31 16:52:46 2024 -0600 iio: accel: bma400: Fix a compilation problem commit 4cb81840d8f29b66d9d05c6d7f360c9560f7e2f4 upstream. The kernel fails when compiling without `CONFIG_REGMAP_I2C` but with `CONFIG_BMA400`. ``` ld: drivers/iio/accel/bma400_i2c.o: in function `bma400_i2c_probe': bma400_i2c.c:(.text+0x23): undefined reference to `__devm_regmap_init_i2c' ``` Link: https://download.01.org/0day-ci/archive/20240131/202401311634.FE5CBVwe-lkp@intel.com/config Fixes: 465c811f1f20 ("iio: accel: Add driver for the BMA400") Fixes: 9bea10642396 ("iio: accel: bma400: add support for bma400 spi") Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20240131225246.14169-1-mario.limonciello@amd.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 36a49290d7e6d554020057a409747a092b1d3b56 Author: zhili.liu Date: Tue Jan 2 09:07:11 2024 +0800 iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC commit 792595bab4925aa06532a14dd256db523eb4fa5e upstream. Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. Fixes: 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100") Suggested-by: Zhouyi Zhou Signed-off-by: zhili.liu Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit fa5884dd5bc29d96af5b45fa7e1d9b024590ad04 Author: David Schiller Date: Mon Jan 22 14:49:17 2024 +0100 staging: iio: ad5933: fix type mismatch regression commit 6db053cd949fcd6254cea9f2cd5d39f7bd64379c upstream. Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") fixed a compiler warning, but introduced a bug that resulted in one of the two 16 bit IIO channels always being zero (when both are enabled). This is because int is 32 bits wide on most architectures and in the case of a little-endian machine the two most significant bytes would occupy the buffer for the second channel as 'val' is being passed as a void pointer to 'iio_push_to_buffers()'. Fix by defining 'val' as u16. Tested working on ARM64. Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") Signed-off-by: David Schiller Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman commit 8a744f925de019bb381c03b47e954a1c492557f3 Author: Steven Rostedt (Google) Date: Fri Feb 9 06:36:22 2024 -0500 tracing: Fix wasted memory in saved_cmdlines logic commit 44dc5c41b5b1267d4dd037d26afc0c4d3a568acb upstream. While looking at improving the saved_cmdlines cache I found a huge amount of wasted memory that should be used for the cmdlines. The tracing data saves pids during the trace. At sched switch, if a trace occurred, it will save the comm of the task that did the trace. This is saved in a "cache" that maps pids to comms and exposed to user space via the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by default 128 comms. The structure that uses this creates an array to store the pids using PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure to be of the size of 131104 bytes on 64 bit machines. In hex: 131104 = 0x20020, and since the kernel allocates generic memory in powers of two, the kernel would allocate 0x40000 or 262144 bytes to store this structure. That leaves 131040 bytes of wasted space. Worse, the structure points to an allocated array to store the comm names, which is 16 bytes times the amount of names to save (currently 128), which is 2048 bytes. Instead of allocating a separate array, make the structure end with a variable length string and use the extra space for that. This is similar to a recommendation that Linus had made about eventfs_inode names: https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/ Instead of allocating a separate string array to hold the saved comms, have the structure end with: char saved_cmdlines[]; and round up to the next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN It will use this extra space for the saved_cmdline portion. Now, instead of saving only 128 comms by default, by using this wasted space at the end of the structure it can save over 8000 comms and even saves space by removing the need for allocating the other array. Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Vincent Donnefort Cc: Sven Schnelle Cc: Mete Durlu Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit d033a555d9a1cf53dbf3301af7199cc4a4c8f537 Author: Baokun Li Date: Thu Jan 4 22:20:33 2024 +0800 ext4: fix double-free of blocks due to wrong extents moved_len commit 55583e899a5357308274601364741a83e78d6ac4 upstream. In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue. Reported-by: Wei Chen Reported-by: xingwei lee Closes: https://lore.kernel.org/r/CAO4mrferzqBUnCag8R3m2zf897ts9UEuhjFQGPtODT92rYyR2Q@mail.gmail.com Fixes: fcf6b1b729bc ("ext4: refactor ext4_move_extents code base") CC: # 3.18 Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20240104142040.2835097-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit f86e12415b4e4c4570722efeb9080ade7f6c91e8 Author: Ekansh Gupta Date: Mon Jan 8 17:18:33 2024 +0530 misc: fastrpc: Mark all sessions as invalid in cb_remove commit a4e61de63e34860c36a71d1a364edba16fb6203b upstream. In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable Signed-off-by: Ekansh Gupta Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman commit a423042052ec2bdbf1e552e621e6a768922363cc Author: Carlos Llamas Date: Wed Jan 31 21:53:46 2024 +0000 binder: signal epoll threads of self-work commit 97830f3c3088638ff90b20dfba2eb4d487bf14d7 upstream. In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: Arve Hjønnevåg Cc: Martijn Coenen Cc: Alice Ryhl Cc: Steven Moreland Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman commit 6d11240dd11b76de254e9a52c9f4a06f953d60a6 Author: Edson Juliano Drosdeck Date: Thu Feb 1 09:21:14 2024 -0300 ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADL commit c7de2d9bb68a5fc71c25ff96705a80a76c8436eb upstream. Vaio VJFE-ADL is equipped with ALC269VC, and it needs ALC298_FIXUP_SPK_VOLUME quirk to make its headset mic work. Signed-off-by: Edson Juliano Drosdeck Cc: Link: https://lore.kernel.org/r/20240201122114.30080-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit cdaddb457d9ed2740ced7e6c10972d2b8c282798 Author: Jan Beulich Date: Mon Jan 29 14:03:08 2024 +0100 xen-netback: properly sync TX responses commit 7b55984c96ffe9e236eb9c82a2196e0b1f84990d upstream. Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Paul Durrant Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 0d8011a878fdf96123bc0d6a12e2fe7ced5fddfb Author: Nikita Zhandarovich Date: Wed Jan 24 02:21:47 2024 -0800 net: hsr: remove WARN_ONCE() in send_hsr_supervision_frame() commit 37e8c97e539015637cb920d3e6f1e404f707a06e upstream. Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). Cc: stable@vger.kernel.org Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com Fixes: 121c33b07b31 ("net: hsr: introduce common code for skb initialization") Signed-off-by: Nikita Zhandarovich Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2f6d16f0520d6505241629ee2f5c131b547d5f9d Author: Fedor Pchelkin Date: Thu Jan 25 12:53:09 2024 +0300 nfc: nci: free rx_data_reassembly skb on NCI device cleanup commit bfb007aebe6bff451f7f3a4be19f4f286d0d5d9c upstream. rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Cc: stable@vger.kernel.org Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/ Signed-off-by: Fedor Pchelkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5abf3e8af2e34dd8b21f6a35f9a7672eea0e3abc Author: Nathan Chancellor Date: Mon Feb 12 19:05:10 2024 -0700 kbuild: Fix changing ELF file type for output of gen_btf for big endian commit e3a9ee963ad8ba677ca925149812c5932b49af69 upstream. Commit 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") changed the ELF type of .btf.vmlinux.bin.o to ET_REL via dd, which works fine for little endian platforms: 00000000 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 03 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................| +00000010 01 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................| However, for big endian platforms, it changes the wrong byte, resulting in an invalid ELF file type, which ld.lld rejects: 00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| +00000010 01 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| Type: : 103 ld.lld: error: .btf.vmlinux.bin.o: unknown file type Fix this by updating the entire 16-bit e_type field rather than just a single byte, so that everything works correctly for all platforms and linkers. 00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| +00000010 00 01 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| Type: REL (Relocatable file) While in the area, update the comment to mention that binutils 2.35+ matches LLD's behavior of rejecting an ET_EXEC input, which occurred after the comment was added. Cc: stable@vger.kernel.org Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") Link: https://github.com/llvm/llvm-project/pull/75643 Suggested-by: Masahiro Yamada Signed-off-by: Nathan Chancellor Reviewed-by: Fangrui Song Reviewed-by: Nicolas Schier Reviewed-by: Kees Cook Reviewed-by: Justin Stitt Signed-off-by: Masahiro Yamada [nathan: Fix silent conflict due to lack of 7d153696e5db in older trees] Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman commit 6717c593c7cf003d65b8a8a77ab320ff752262ab Author: Takashi Sakamoto Date: Thu Feb 1 20:53:18 2024 +0900 firewire: core: correct documentation of fw_csr_string() kernel API commit 5f9ab17394f831cb7986ec50900fa37507a127f1 upstream. Against its current description, the kernel API can accepts all types of directory entries. This commit corrects the documentation. Cc: stable@vger.kernel.org Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum") Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman commit 2dc1d93b2c777fb9cb98b9937512bd07050f930c Author: Ondrej Mosnacek Date: Fri Jan 26 11:44:03 2024 +0100 lsm: fix the logic in security_inode_getsecctx() commit 99b817c173cd213671daecd25ca27f56b0c7c4ec upstream. The inode_getsecctx LSM hook has previously been corrected to have -EOPNOTSUPP instead of 0 as the default return value to fix BPF LSM behavior. However, the call_int_hook()-generated loop in security_inode_getsecctx() was left treating 0 as the neutral value, so after an LSM returns 0, the loop continues to try other LSMs, and if one of them returns a non-zero value, the function immediately returns with said value. So in a situation where SELinux and the BPF LSMs registered this hook, -EOPNOTSUPP would be incorrectly returned whenever SELinux returned 0. Fix this by open-coding the call_int_hook() loop and making it use the correct LSM_RET_DEFAULT() value as the neutral one, similar to what other hooks do. Cc: stable@vger.kernel.org Reported-by: Stephen Smalley Link: https://lore.kernel.org/selinux/CAEjxPJ4ev-pasUwGx48fDhnmjBnq_Wh90jYPwRQRAqXxmOKD4Q@mail.gmail.com/ Link: https://bugzilla.redhat.com/show_bug.cgi?id=2257983 Fixes: b36995b8609a ("lsm: fix default return value for inode_getsecctx") Signed-off-by: Ondrej Mosnacek Reviewed-by: Casey Schaufler [PM: subject line tweak] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 7d4e19f7ff644c5b79e8271df8ac2e549b436a5b Author: Lee Duncan Date: Fri Feb 9 10:07:34 2024 -0800 scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock" commit 977fe773dcc7098d8eaf4ee6382cb51e13e784cb upstream. This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit. Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock") Signed-off-by: Lee Duncan Link: https://lore.kernel.org/r/c578cdcd46b60470535c4c4a953e6a1feca0dffd.1707500786.git.lduncan@suse.com Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit ca188f2512d628099364cc83f6419c561fdba7f8 Author: Radek Krejci Date: Wed Feb 14 10:14:07 2024 +0100 modpost: trim leading spaces when processing source files list [ Upstream commit 5d9a16b2a4d9e8fa028892ded43f6501bc2969e5 ] get_line() does not trim the leading spaces, but the parse_source_files() expects to get lines with source files paths where the first space occurs after the file path. Fixes: 70f30cfe5b89 ("modpost: use read_text_file() and get_line() for reading text files") Signed-off-by: Radek Krejci Signed-off-by: Masahiro Yamada Signed-off-by: Sasha Levin commit 7a14b8a477b88607d157c24aeb23e7389ec3319f Author: Jean Delvare Date: Wed Feb 14 15:59:39 2024 +0100 i2c: i801: Fix block process call transactions [ Upstream commit c1c9d0f6f7f1dbf29db996bd8e166242843a5f21 ] According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read. Signed-off-by: Jean Delvare Reported-by: Piotr Zakowski Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/ Fixes: 315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call support") Reviewed-by: Alexander Sverdlin Signed-off-by: Andi Shyti Signed-off-by: Sasha Levin commit 5e8a6140d42f0583f754f7960668f7ef74dd18be Author: Heiner Kallweit Date: Thu Nov 18 23:58:17 2021 +0100 i2c: i801: Remove i801_set_block_buffer_mode [ Upstream commit 1e1d6582f483a4dba4ea03445e6f2f05d9de5bcf ] If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode. Signed-off-by: Heiner Kallweit Reviewed-by: Jean Delvare Tested-by: Jean Delvare Signed-off-by: Wolfram Sang Stable-dep-of: c1c9d0f6f7f1 ("i2c: i801: Fix block process call transactions") Signed-off-by: Sasha Levin commit 230e89b5ad0a33f530a2a976b3e5e4385cb27882 Author: Jiangfeng Xiao Date: Tue Jan 23 09:45:59 2024 +0800 powerpc/kasan: Fix addr error caused by page alignment [ Upstream commit 4a7aee96200ad281a5cc4cf5c7a2e2a49d2b97b0 ] In kasan_init_region, when k_start is not page aligned, at the begin of for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then `va = block + k_cur - k_start` is less than block, the addr va is invalid, because the memory address space from va to block is not alloced by memblock_alloc, which will not be reserved by memblock_reserve later, it will be used by other places. As a result, memory overwriting occurs. for example: int __init __weak kasan_init_region(void *start, size_t size) { [...] /* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */ block = memblock_alloc(k_end - k_start, PAGE_SIZE); [...] for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) { /* at the begin of for loop * block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400) * va(dcd96c00) is less than block(dcd97000), va is invalid */ void *va = block + k_cur - k_start; [...] } [...] } Therefore, page alignment is performed on k_start before memblock_alloc() to ensure the validity of the VA address. Fixes: 663c0c9496a6 ("powerpc/kasan: Fix shadow area set up for modules.") Signed-off-by: Jiangfeng Xiao Signed-off-by: Michael Ellerman Link: https://msgid.link/1705974359-43790-1-git-send-email-xiaojiangfeng@huawei.com Signed-off-by: Sasha Levin commit 486a4176bc783df798bce2903824801af8d2c3ae Author: Zhipeng Lu Date: Wed Jan 17 09:14:19 2024 +0100 media: ir_toy: fix a memleak in irtoy_tx [ Upstream commit dc9ceb90c4b42c6e5c6757df1d6257110433788e ] When irtoy_command fails, buf should be freed since it is allocated by irtoy_tx, or there is a memleak. Fixes: 4114978dcd24 ("media: ir_toy: prevent device from hanging during transmit") Signed-off-by: Zhipeng Lu Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit b8da59ad91e818b0510ee0e55fc4b288b0541391 Author: yuan linyu Date: Tue Jan 23 11:48:29 2024 +0800 usb: f_mass_storage: forbid async queue when shutdown happen commit b2d2d7ea0dd09802cf5a0545bf54d8ad8987d20c upstream. When write UDC to empty and unbind gadget driver from gadget device, it is possible that there are many queue failures for mass storage function. The root cause is mass storage main thread alaways try to queue request to receive a command from host if running flag is on, on platform like dwc3, if pull down called, it will not queue request again and return -ESHUTDOWN, but it not affect running flag of mass storage function. Check return code from mass storage function and clear running flag if it is -ESHUTDOWN, also indicate start in/out transfer failure to break loops. Cc: stable Signed-off-by: yuan linyu Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20240123034829.3848409-1-yuanlinyu@hihonor.com Signed-off-by: Greg Kroah-Hartman commit 9a8ccbc6ecbf1abef988a9045bbc9661b46a31ad Author: Oliver Neukum Date: Mon Jan 22 16:35:32 2024 +0100 USB: hub: check for alternate port before enabling A_ALT_HNP_SUPPORT commit f17c34ffc792bbb520e4b61baa16b6cfc7d44b13 upstream. The OTG 1.3 spec has the feature A_ALT_HNP_SUPPORT, which tells a device that it is connected to the wrong port. Some devices refuse to operate if you enable that feature, because it indicates to them that they ought to request to be connected to another port. According to the spec this feature may be used based only the following three conditions: 6.5.3 a_alt_hnp_support Setting this feature indicates to the B-device that it is connected to an A-device port that is not capable of HNP, but that the A-device does have an alternate port that is capable of HNP. The A-device is required to set this feature under the following conditions: • the A-device has multiple receptacles • the A-device port that connects to the B-device does not support HNP • the A-device has another port that does support HNP A check for the third and first condition is missing. Add it. Signed-off-by: Oliver Neukum Cc: stable Fixes: 7d2d641c44269 ("usb: otg: don't set a_alt_hnp_support feature for OTG 2.0 device") Link: https://lore.kernel.org/r/20240122153545.12284-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman commit 9d07bdbfa49043ce04c1d42e6d8816797ea110ff Author: Christian A. Ehrhardt Date: Sun Jan 21 21:41:22 2024 +0100 usb: ucsi_acpi: Fix command completion handling commit 2840143e393a4ddc1caab4372969ea337371168c upstream. In case of a spurious or otherwise delayed notification it is possible that CCI still reports the previous completion. The UCSI spec is aware of this and provides two completion bits in CCI, one for normal commands and one for acks. As acks and commands alternate the notification handler can determine if the completion bit is from the current command. The initial UCSI code correctly handled this but the distinction between the two completion bits was lost with the introduction of the new API. To fix this revive the ACK_PENDING bit for ucsi_acpi and only complete commands if the completion bit matches. Fixes: f56de278e8ec ("usb: typec: ucsi: acpi: Move to the new API") Cc: stable@vger.kernel.org Signed-off-by: "Christian A. Ehrhardt" Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240121204123.275441-3-lk@c--e.de Signed-off-by: Greg Kroah-Hartman commit f304eb483393f135ab479d02da6f5dc7d9b51cd6 Author: Jason Gerecke Date: Mon Jan 29 14:35:45 2024 -0800 HID: wacom: Do not register input devices until after hid_hw_start commit c1d6708bf0d3dd976460d435373cf5abf21ce258 upstream. If a input device is opened before hid_hw_start is called, events may not be received from the hardware. In the case of USB-backed devices, for example, the hid_hw_start function is responsible for filling in the URB which is submitted when the input device is opened. If a device is opened prematurely, polling will never start because the device will not have been in the correct state to send the URB. Because the wacom driver registers its input devices before calling hid_hw_start, there is a window of time where a device can be opened and end up in an inoperable state. Some ARM-based Chromebooks in particular reliably trigger this bug. This commit splits the wacom_register_inputs function into two pieces. One which is responsible for setting up the allocated inputs (and runs prior to hid_hw_start so that devices are ready for any input events they may end up receiving) and another which only registers the devices (and runs after hid_hw_start to ensure devices can be immediately opened without issue). Note that the functions to initialize the LEDs and remotes are also moved after hid_hw_start to maintain their own dependency chains. Fixes: 7704ac937345 ("HID: wacom: implement generic HID handling for pen generic devices") Cc: stable@vger.kernel.org # v3.18+ Suggested-by: Dmitry Torokhov Signed-off-by: Jason Gerecke Tested-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 4f7927310e2de9176463e382b702fc3753f8df78 Author: Tatsunosuke Tobita Date: Thu Feb 1 13:40:55 2024 +0900 HID: wacom: generic: Avoid reporting a serial of '0' to userspace commit ab41a31dd5e2681803642b6d08590b61867840ec upstream. The xf86-input-wacom driver does not treat '0' as a valid serial number and will drop any input report which contains an MSC_SERIAL = 0 event. The kernel driver already takes care to avoid sending any MSC_SERIAL event if the value of serial[0] == 0 (which is the case for devices that don't actually report a serial number), but this is not quite sufficient. Only the lower 32 bits of the serial get reported to userspace, so if this portion of the serial is zero then there can still be problems. This commit allows the driver to report either the lower 32 bits if they are non-zero or the upper 32 bits otherwise. Signed-off-by: Jason Gerecke Signed-off-by: Tatsunosuke Tobita Fixes: f85c9dc678a5 ("HID: wacom: generic: Support tool ID and additional tool types") CC: stable@vger.kernel.org # v4.10 Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit d51fc41e159f1cfa075773262b492f7bfd5ea85d Author: Luka Guzenko Date: Sun Jan 28 16:57:04 2024 +0100 ALSA: hda/realtek: Enable Mute LED on HP Laptop 14-fq0xxx commit f0d78972f27dc1d1d51fbace2713ad3cdc60a877 upstream. This HP Laptop uses ALC236 codec with COEF 0x07 controlling the mute LED. Enable existing quirk for this device. Signed-off-by: Luka Guzenko Cc: Link: https://lore.kernel.org/r/20240128155704.2333812-1-l.guzenko@web.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 8da18c51ce4ac430565010ff504fa9076c03fd98 Author: David Senoner Date: Fri Jan 26 16:56:26 2024 +0100 ALSA: hda/realtek: Fix the external mic not being recognised for Acer Swift 1 SF114-32 commit efb56d84dd9c3de3c99fc396abb57c6d330038b5 upstream. If you connect an external headset/microphone to the 3.5mm jack on the Acer Swift 1 SF114-32 it does not recognize the microphone. This fixes that and gives the user the ability to choose between internal and headset mic. Signed-off-by: David Senoner Cc: Link: https://lore.kernel.org/r/20240126155626.2304465-1-seda18@rolmail.net Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 81e7d2530d458548b90a5c5e76b77ad5e5d1c0df Author: Zach O'Keefe Date: Thu Jan 18 10:19:53 2024 -0800 mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78 upstream. (struct dirty_throttle_control *)->thresh is an unsigned long, but is passed as the u32 divisor argument to div_u64(). On architectures where unsigned long is 64 bytes, the argument will be implicitly truncated. Use div64_u64() instead of div_u64() so that the value used in the "is this a safe division" check is the same as the divisor. Also, remove redundant cast of the numerator to u64, as that should happen implicitly. This would be difficult to exploit in memcg domain, given the ratio-based arithmetic domain_drity_limits() uses, but is much easier in global writeback domain with a BDI_CAP_STRICTLIMIT-backing device, using e.g. vm.dirty_bytes=(1<<32)*PAGE_SIZE so that dtc->thresh == (1<<32) Link: https://lkml.kernel.org/r/20240118181954.1415197-1-zokeefe@google.com Fixes: f6789593d5ce ("mm/page-writeback.c: fix divide by zero in bdi_dirty_limits()") Signed-off-by: Zach O'Keefe Cc: Maxim Patlasov Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman commit 56cfbe60710772916a5ba092c99542332b48e870 Author: Masami Hiramatsu (Google) Date: Fri Jan 26 09:42:58 2024 +0900 tracing/trigger: Fix to return error if failed to alloc snapshot commit 0958b33ef5a04ed91f61cef4760ac412080c4e08 upstream. Fix register_snapshot_trigger() to return error code if it failed to allocate a snapshot instead of 0 (success). Unless that, it will register snapshot trigger without an error. Link: https://lore.kernel.org/linux-trace-kernel/170622977792.270660.2789298642759362200.stgit@devnote2 Fixes: 0bbe7f719985 ("tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation") Cc: stable@vger.kernel.org Cc: Vincent Donnefort Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman commit 6d05659b60ac3887e372497904ab216ec949cbd9 Author: Ivan Vecera Date: Wed Nov 8 17:01:03 2023 +0100 i40e: Fix waiting for queues of all VSIs to be disabled [ Upstream commit c73729b64bb692186da080602cd13612783f52ac ] The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs up to 'pf->hw.func_caps.num_vsis' but this is incorrect because the real number of VSIs can be up to 'pf->num_alloc_vsi' that can be higher. Fix this loop. Fixes: 69129dc39fac ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration") Signed-off-by: Ivan Vecera Reviewed-by: Jacob Keller Reviewed-by: Wojciech Drewek Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit f026f23849fb4f962c75b2d73e07f4de2b8a366a Author: Guenter Roeck Date: Sun Feb 11 08:08:37 2024 -0800 MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler [ Upstream commit d55347bfe4e66dce2e1e7501e5492f4af3e315f8 ] After 'lib: checksum: Use aligned accesses for ip_fast_csum and csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test started failing for all mips platforms, both little and bit endian. Oddly enough, adding debug code into test_csum_ipv6_magic() made the problem disappear. The gcc manual says: "The "memory" clobber tells the compiler that the assembly code performs memory reads or writes to items other than those listed in the input and output operands (for example, accessing the memory pointed to by one of the input parameters) " This is definitely the case for csum_ipv6_magic(). Indeed, adding the 'memory' clobber fixes the problem. Cc: Charlie Jenkins Cc: Palmer Dabbelt Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guenter Roeck Reviewed-by: Charlie Jenkins Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit ed8c87ac8afc63b190bd592fefec675f698c49fa Author: Breno Leitao Date: Fri Feb 9 01:55:18 2024 -0800 net: sysfs: Fix /sys/class/net/ path for statistics [ Upstream commit 5b3fbd61b9d1f4ed2db95aaf03f9adae0373784d ] The Documentation/ABI/testing/sysfs-class-net-statistics documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/, instead of /sys/class/net/. Fix it by adding the `net/` directory before the interface. Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*") Signed-off-by: Breno Leitao Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4a98bc739d0753a5810ce5630943cd7614c7717e Author: Alexey Khoroshilov Date: Sun Feb 11 12:58:34 2024 +0300 ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() [ Upstream commit 6ef5d5b92f7117b324efaac72b3db27ae8bb3082 ] There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cdba4301adda ("ASoC: rt5650: add mutex to avoid the jack detection failure") Signed-off-by: Alexey Khoroshilov Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit f8cd86c67d4c504b600016219a7effc9ba6f2f05 Author: Uwe Kleine-König Date: Sat Feb 10 17:40:08 2024 +0100 spi: ppc4xx: Drop write-only variable [ Upstream commit b3aa619a8b4706f35cb62f780c14e68796b37f3f ] Since commit 24778be20f87 ("spi: convert drivers to use bits_per_word_mask") the bits_per_word variable is only written to. The check that was there before isn't needed any more as the spi core ensures that only 8 bit transfers are used, so the variable can go away together with all assignments to it. Fixes: 24778be20f87 ("spi: convert drivers to use bits_per_word_mask") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240210164006.208149-8-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 55cfccb658fc142d7fbfeae2d0496b7841d128c3 Author: Aaron Conole Date: Wed Feb 7 08:24:15 2024 -0500 net: openvswitch: limit the number of recursions from action sets [ Upstream commit 6e2f90d31fe09f2b852de25125ca875aabd81367 ] The ovs module allows for some actions to recursively contain an action list for complex scenarios, such as sampling, checking lengths, etc. When these actions are copied into the internal flow table, they are evaluated to validate that such actions make sense, and these calls happen recursively. The ovs-vswitchd userspace won't emit more than 16 recursion levels deep. However, the module has no such limit and will happily accept limits larger than 16 levels nested. Prevent this by tracking the number of recursions happening and manually limiting it to 16 levels nested. The initial implementation of the sample action would track this depth and prevent more than 3 levels of recursion, but this was removed to support the clone use case, rather than limited at the current userspace limit. Fixes: 798c166173ff ("openvswitch: Optimize sample action for the clone use cases") Signed-off-by: Aaron Conole Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 3f9b9585b7e4b4477de181eaf447af495c0e52c8 Author: Christian A. Ehrhardt Date: Mon Jan 29 20:25:56 2024 +0100 of: unittest: Fix compile in the non-dynamic case [ Upstream commit 607aad1e4356c210dbef9022955a3089377909b2 ] If CONFIG_OF_KOBJ is not set, a device_node does not contain a kobj and attempts to access the embedded kobj via kref_read break the compile. Replace affected kref_read calls with a macro that reads the refcount if it exists and returns 1 if there is no embedded kobj. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202401291740.VP219WIz-lkp@intel.com/ Fixes: 4dde83569832 ("of: Fix double free in of_parse_phandle_with_args_map") Signed-off-by: Christian A. Ehrhardt Link: https://lore.kernel.org/r/20240129192556.403271-1-lk@c--e.de Signed-off-by: Rob Herring Signed-off-by: Sasha Levin commit dc8bce9c71ef0d66e309c767bd24a6aede9ae1f8 Author: David Sterba Date: Wed Jan 10 17:48:44 2024 +0100 btrfs: send: return EOPNOTSUPP on unknown flags commit f884a9f9e59206a2d41f265e7e403f080d10b493 upstream. When some ioctl flags are checked we return EOPNOTSUPP, like for BTRFS_SCRUB_SUPPORTED_FLAGS, BTRFS_SUBVOL_CREATE_ARGS_MASK or fallocate modes. The EINVAL is supposed to be for a supported but invalid values or combination of options. Fix that when checking send flags so it's consistent with the rest. CC: stable@vger.kernel.org # 4.14+ Link: https://lore.kernel.org/linux-btrfs/CAL3q7H5rryOLzp3EKq8RTbjMHMHeaJubfpsVLF6H4qJnKCUR1w@mail.gmail.com/ Reviewed-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 22965e4fee0ff605ebab656a60060b320fcf6e38 Author: Boris Burkov Date: Wed Jan 10 17:30:00 2024 -0800 btrfs: forbid deleting live subvol qgroup commit a8df35619948bd8363d330c20a90c9a7fbff28c0 upstream. If a subvolume still exists, forbid deleting its qgroup 0/subvolid. This behavior generally leads to incorrect behavior in squotas and doesn't have a legitimate purpose. Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 3f5d47eb163bceb1b9e613c9003bae5fefc0046f Author: Qu Wenruo Date: Sat Jan 20 19:41:28 2024 +1030 btrfs: do not ASSERT() if the newly created subvolume already got read commit e03ee2fe873eb68c1f9ba5112fee70303ebf9dfb upstream. [BUG] There is a syzbot crash, triggered by the ASSERT() during subvolume creation: assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319 ------------[ cut here ]------------ kernel BUG at fs/btrfs/disk-io.c:1319! invalid opcode: 0000 [#1] PREEMPT SMP KASAN RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60 btrfs_get_new_fs_root+0xd3/0xf0 create_subvol+0xd02/0x1650 btrfs_mksubvol+0xe95/0x12b0 __btrfs_ioctl_snap_create+0x2f9/0x4f0 btrfs_ioctl_snap_create+0x16b/0x200 btrfs_ioctl+0x35f0/0x5cf0 __x64_sys_ioctl+0x19d/0x210 do_syscall_64+0x3f/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b ---[ end trace 0000000000000000 ]--- [CAUSE] During create_subvol(), after inserting root item for the newly created subvolume, we would trigger btrfs_get_new_fs_root() to get the btrfs_root of that subvolume. The idea here is, we have preallocated an anonymous device number for the subvolume, thus we can assign it to the new subvolume. But there is really nothing preventing things like backref walk to read the new subvolume. If that happens before we call btrfs_get_new_fs_root(), the subvolume would be read out, with a new anonymous device number assigned already. In that case, we would trigger ASSERT(), as we really expect no one to read out that subvolume (which is not yet accessible from the fs). But things like backref walk is still possible to trigger the read on the subvolume. Thus our assumption on the ASSERT() is not correct in the first place. [FIX] Fix it by removing the ASSERT(), and just free the @anon_dev, reset it to 0, and continue. If the subvolume tree is read out by something else, it should have already get a new anon_dev assigned thus we only need to free the preallocated one. Reported-by: Chenyuan Yang Fixes: 2dfb1e43f57d ("btrfs: preallocate anon block device at first phase of snapshot creation") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit d7247ce32ab2a2d4a3647a9679dda628407461b9 Author: Boris Burkov Date: Wed Jan 10 17:51:26 2024 -0800 btrfs: forbid creating subvol qgroups commit 0c309d66dacddf8ce939b891d9ead4a8e21ad6f0 upstream. Creating a qgroup 0/subvolid leads to various races and it isn't helpful, because you can't specify a subvol id when creating a subvol, so you can't be sure it will be the right one. Any requirements on the automatic subvol can be gratified by using a higher level qgroup and the inheritance parameters of subvol creation. Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 4cee42fcf54fec46b344681e7cc4f234bb22f85a Author: Pablo Neira Ayuso Date: Wed Feb 7 18:49:51 2024 +0100 netfilter: nft_set_rbtree: skip end interval element from gc commit 60c0c230c6f046da536d3df8b39a20b9a9fd6af0 upstream. rbtree lazy gc on insert might collect an end interval element that has been just added in this transactions, skip end interval elements that are not yet active. Fixes: f718863aca46 ("netfilter: nft_set_rbtree: fix overlap expiration walk") Cc: stable@vger.kernel.org Reported-by: lonial con Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit feace3c2404454fb049f2dcb028c4205ffaaa5cb Author: Furong Xu <0x1207@gmail.com> Date: Sat Feb 3 13:31:33 2024 +0800 net: stmmac: xgmac: fix a typo of register name in DPP safety handling commit 1ce2654d87e2fb91fea83b288bd9b2641045e42a upstream. DDPP is copied from Synopsys Data book: DDPP: Disable Data path Parity Protection. When it is 0x0, Data path Parity Protection is enabled. When it is 0x1, Data path Parity Protection is disabled. The macro name should be XGMAC_DPP_DISABLE. Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman commit 78115a3473b1f91818077860ef74c2f55ca11720 Author: Simon Horman Date: Thu Feb 8 09:48:27 2024 +0000 net: stmmac: xgmac: use #define for string constants commit 1692b9775e745f84b69dc8ad0075b0855a43db4e upstream. The cited commit introduces and uses the string constants dpp_tx_err and dpp_rx_err. These are assigned to constant fields of the array dwxgmac3_error_desc. It has been reported that on GCC 6 and 7.5.0 this results in warnings such as: .../dwxgmac2_core.c:836:20: error: initialiser element is not constant { true, "TDPES0", dpp_tx_err }, I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0. But not GCC 13.2.0. So it seems this effects older compilers but not newer ones. As Jon points out in his report, the minimum compiler supported by the kernel is GCC 5.1, so it does seem that this ought to be fixed. It is not clear to me what combination of 'const', if any, would address this problem. So this patch takes of using #defines for the string constants Compile tested only. Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Reported-by: Jon Hunter Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/ Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/ Signed-off-by: Simon Horman Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 8868106251cd3e3753598605f567bb73bc70aa12 Author: Jiri Wiesner Date: Mon Jan 22 18:23:50 2024 +0100 clocksource: Skip watchdog check for large watchdog intervals commit 644649553508b9bacf0fc7a5bdc4f9e0165576a5 upstream. There have been reports of the watchdog marking clocksources unstable on machines with 8 NUMA nodes: clocksource: timekeeping watchdog on CPU373: Marking clocksource 'tsc' as unstable because the skew is too large: clocksource: 'hpet' wd_nsec: 14523447520 clocksource: 'tsc' cs_nsec: 14524115132 The measured clocksource skew - the absolute difference between cs_nsec and wd_nsec - was 668 microseconds: cs_nsec - wd_nsec = 14524115132 - 14523447520 = 667612 The kernel used 200 microseconds for the uncertainty_margin of both the clocksource and watchdog, resulting in a threshold of 400 microseconds (the md variable). Both the cs_nsec and the wd_nsec value indicate that the readout interval was circa 14.5 seconds. The observed behaviour is that watchdog checks failed for large readout intervals on 8 NUMA node machines. This indicates that the size of the skew was directly proportinal to the length of the readout interval on those machines. The measured clocksource skew, 668 microseconds, was evaluated against a threshold (the md variable) that is suited for readout intervals of roughly WATCHDOG_INTERVAL, i.e. HZ >> 1, which is 0.5 second. The intention of 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold") was to tighten the threshold for evaluating skew and set the lower bound for the uncertainty_margin of clocksources to twice WATCHDOG_MAX_SKEW. Later in c37e85c135ce ("clocksource: Loosen clocksource watchdog constraints"), the WATCHDOG_MAX_SKEW constant was increased to 125 microseconds to fit the limit of NTP, which is able to use a clocksource that suffers from up to 500 microseconds of skew per second. Both the TSC and the HPET use default uncertainty_margin. When the readout interval gets stretched the default uncertainty_margin is no longer a suitable lower bound for evaluating skew - it imposes a limit that is far stricter than the skew with which NTP can deal. The root causes of the skew being directly proportinal to the length of the readout interval are: * the inaccuracy of the shift/mult pairs of clocksources and the watchdog * the conversion to nanoseconds is imprecise for large readout intervals Prevent this by skipping the current watchdog check if the readout interval exceeds 2 * WATCHDOG_INTERVAL. Considering the maximum readout interval of 2 * WATCHDOG_INTERVAL, the current default uncertainty margin (of the TSC and HPET) corresponds to a limit on clocksource skew of 250 ppm (microseconds of skew per second). To keep the limit imposed by NTP (500 microseconds of skew per second) for all possible readout intervals, the margins would have to be scaled so that the threshold value is proportional to the length of the actual readout interval. As for why the readout interval may get stretched: Since the watchdog is executed in softirq context the expiration of the watchdog timer can get severely delayed on account of a ksoftirqd thread not getting to run in a timely manner. Surely, a system with such belated softirq execution is not working well and the scheduling issue should be looked into but the clocksource watchdog should be able to deal with it accordingly. Fixes: 2e27e793e280 ("clocksource: Reduce clocksource-skew threshold") Suggested-by: Feng Tang Signed-off-by: Jiri Wiesner Signed-off-by: Thomas Gleixner Tested-by: Paul E. McKenney Reviewed-by: Feng Tang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240122172350.GA740@incl Signed-off-by: Greg Kroah-Hartman commit cda4ca038cafe016bd8dcac8cac83d771dfdcbf0 Author: Prathu Baronia Date: Mon May 22 14:20:19 2023 +0530 vhost: use kzalloc() instead of kmalloc() followed by memset() commit 4d8df0f5f79f747d75a7d356d9b9ea40a4e4c8a9 upstream. Use kzalloc() to allocate new zeroed out msg node instead of memsetting a node allocated with kmalloc(). Signed-off-by: Prathu Baronia Message-Id: <20230522085019.42914-1-prathubaronia2011@gmail.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Signed-off-by: Ajay Kaher Signed-off-by: Greg Kroah-Hartman commit 63d97c3abafd0ede5db69aca9af6155fc1ef9bc3 Author: Hans de Goede Date: Fri Jan 26 17:07:23 2024 +0100 Input: atkbd - skip ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID commit 683cd8259a9b883a51973511f860976db2550a6e upstream. After commit 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") the keyboard on Dell XPS 13 9350 / 9360 / 9370 models has stopped working after a suspend/resume. The problem appears to be that atkbd_probe() fails when called from atkbd_reconnect() on resume, which on systems where ATKBD_CMD_GETID is skipped can only happen by ATKBD_CMD_SETLEDS failing. ATKBD_CMD_SETLEDS failing because ATKBD_CMD_GETID was skipped is weird, but apparently that is what is happening. Fix this by also skipping ATKBD_CMD_SETLEDS when skipping ATKBD_CMD_GETID. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Paul Menzel Closes: https://lore.kernel.org/linux-input/0aa4a61f-c939-46fe-a572-08022e8931c7@molgen.mpg.de/ Closes: https://bbs.archlinux.org/viewtopic.php?pid=2146300 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218424 Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2260517 Tested-by: Paul Menzel Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240126160724.13278-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 9a564a9a0731fe8ab495313a703caa85e357df2a Author: Werner Sembach Date: Tue Dec 5 17:36:01 2023 +0100 Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU commit a60e6c3918d20848906ffcdfcf72ca6a8cfbcf2e upstream. When closing the laptop lid with an external screen connected, the mouse pointer has a constant movement to the lower right corner. Opening the lid again stops this movement, but after that the touchpad does no longer register clicks. The touchpad is connected both via i2c-hid and PS/2, the predecessor of this device (NS70MU) has the same layout in this regard and also strange behaviour caused by the psmouse and the i2c-hid driver fighting over touchpad control. This fix is reusing the same workaround by just disabling the PS/2 aux port, that is only used by the touchpad, to give the i2c-hid driver the lone control over the touchpad. v2: Rebased on current master Signed-off-by: Werner Sembach Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231205163602.16106-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit b1f576be92d06228d4626b8c411e18dc408b8f6f Author: Frederic Weisbecker Date: Mon Jan 29 15:56:36 2024 -0800 hrtimer: Report offline hrtimer enqueue commit dad6a09f3148257ac1773cd90934d721d68ab595 upstream. The hrtimers migration on CPU-down hotplug process has been moved earlier, before the CPU actually goes to die. This leaves a small window of opportunity to queue an hrtimer in a blind spot, leaving it ignored. For example a practical case has been reported with RCU waking up a SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that way a sched/rt timer to the local offline CPU. Make sure such situations never go unnoticed and warn when that happens. Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Reported-by: Paul E. McKenney Signed-off-by: Frederic Weisbecker Signed-off-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com Signed-off-by: Greg Kroah-Hartman commit b87060b3e835ae7d9f362d74189c4da7b85e9583 Author: Prashanth K Date: Tue Jan 16 11:28:16 2024 +0530 usb: host: xhci-plat: Add support for XHCI_SG_TRB_CACHE_SIZE_QUIRK commit 520b391e3e813c1dd142d1eebb3ccfa6d08c3995 upstream. Upstream commit bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. Currently this quirk can only be set using xhci private data. But there are some drivers like dwc3/host.c which adds adds quirks using software node for xhci device. Hence set this xhci quirk by iterating over device properties. Cc: stable@vger.kernel.org # 5.11 Fixes: bac1ec551434 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") Signed-off-by: Prashanth K Link: https://lore.kernel.org/r/20240116055816.1169821-3-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman commit 34fd6f444b8a3b10dba3f9cdb8754b77b2818c40 Author: Leonard Dallmayr Date: Fri Jan 5 13:35:51 2024 +0100 USB: serial: cp210x: add ID for IMST iM871A-USB commit 12b17b4eb82a41977eb848048137b5908d52845c upstream. The device IMST USB-Stick for Smart Meter is a rebranded IMST iM871A-USB Wireless M-Bus USB-adapter. It is used to read wireless water, gas and electricity meters. Signed-off-by: Leonard Dallmayr Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 53479fcfd04c0a02694d6f6d84fd2b2e8da55707 Author: Puliang Lu Date: Wed Jan 31 17:12:24 2024 +0800 USB: serial: option: add Fibocom FM101-GL variant commit b4a1f4eaf1d798066affc6ad040f76eb1a16e1c9 upstream. Update the USB serial option driver support for the Fibocom FM101-GL LTE modules as there are actually several different variants. - VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) 0x01a3:mbim,gnss Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a3 Rev=05.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=5ccd5cd4 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Puliang Lu Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit c537b88b39d3f755932886c9ac8750df64f71414 Author: JackBB Wu Date: Tue Jan 23 17:39:48 2024 +0800 USB: serial: qcserial: add new usb-id for Dell Wireless DW5826e commit 129690fb229a20b6e563a77a2c85266acecf20bc upstream. Add support for Dell DW5826e with USB-id 0x413c:0x8217 & 0x413c:0x8218. It is 0x413c:0x8217 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8217 Rev= 5.04 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=qcserial E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=qcserial E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is 0x413c:0x8218 T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8218 Rev= 0.00 S: Manufacturer=DELL S: Product=COMPAL Electronics EXM-G1A S: SerialNumber=359302940050401 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: JackBB Wu Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit e800ef36d1fa93558ac29ab7a9f325039957d64b Author: Julian Wiedmann Date: Mon Aug 9 10:30:47 2021 +0200 net/af_iucv: clean up a try_then_request_module() [ Upstream commit 4eb9eda6ba64114d98827e2870e024d5ab7cd35b ] Use IS_ENABLED(CONFIG_IUCV) to determine whether the iucv_if symbol is available, and let depmod deal with the module dependency. This was introduced back with commit 6fcd61f7bf5d ("af_iucv: use loadable iucv interface"). And to avoid sprinkling IS_ENABLED() over all the code, we're keeping the indirection through pr_iucv->...(). Signed-off-by: Julian Wiedmann Signed-off-by: Karsten Graul Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9f56f38331171c9a19754004f0664686d67ee48d Author: Tejun Heo Date: Mon Nov 20 12:25:56 2023 -1000 blk-iocost: Fix an UBSAN shift-out-of-bounds warning [ Upstream commit 2a427b49d02995ea4a6ff93a1432c40fa4d36821 ] When iocg_kick_delay() is called from a CPU different than the one which set the delay, @now may be in the past of @iocg->delay_at leading to the following warning: UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23 shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: dump_stack_lvl+0x79/0xc0 __ubsan_handle_shift_out_of_bounds+0x2ab/0x300 iocg_kick_delay+0x222/0x230 ioc_rqos_merge+0x1d7/0x2c0 __rq_qos_merge+0x2c/0x80 bio_attempt_back_merge+0x83/0x190 blk_attempt_plug_merge+0x101/0x150 blk_mq_submit_bio+0x2b1/0x720 submit_bio_noacct_nocheck+0x320/0x3e0 __swap_writepage+0x2ab/0x9d0 The underflow itself doesn't really affect the behavior in any meaningful way; however, the past timestamp may exaggerate the delay amount calculated later in the code, which shouldn't be a material problem given the nature of the delay mechanism. If @now is in the past, this CPU is racing another CPU which recently set up the delay and there's nothing this CPU can contribute w.r.t. the delay. Let's bail early from iocg_kick_delay() in such cases. Reported-by: Breno Leitão Signed-off-by: Tejun Heo Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis") Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 9878c660d1f0d37715547668adf241b5fb171dc1 Author: Ming Lei Date: Sat Feb 3 10:45:21 2024 +0800 scsi: core: Move scsi_host_busy() out of host lock if it is for per-command [ Upstream commit 4e6c9011990726f4d175e2cdfebe5b0b8cce4839 ] Commit 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") intended to fix a hard lockup issue triggered by EH. The core idea was to move scsi_host_busy() out of the host lock when processing individual commands for EH. However, a suggested style change inadvertently caused scsi_host_busy() to remain under the host lock. Fix this by calling scsi_host_busy() outside the lock. Fixes: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") Cc: Sathya Prakash Veerichetty Cc: Bart Van Assche Cc: Ewan D. Milne Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 1dd947c21d3f91118a406662a005eb990faecf9a Author: Florian Westphal Date: Thu Feb 8 10:31:29 2024 +0100 netfilter: nft_set_pipapo: remove scratch_aligned pointer [ Upstream commit 5a8cdf6fd860ac5e6d08d72edbcecee049a7fec4 ] use ->scratch for both avx2 and the generic implementation. After previous change the scratch->map member is always aligned properly for AVX2, so we can just use scratch->map in AVX2 too. The alignoff delta is stored in the scratchpad so we can reconstruct the correct address to free the area again. Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Reviewed-by: Stefano Brivio Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit d6fcad0da2bdf585bc4f47ac284ca9620085117c Author: Florian Westphal Date: Wed Feb 7 21:52:47 2024 +0100 netfilter: nft_set_pipapo: add helper to release pcpu scratch area [ Upstream commit 47b1c03c3c1a119435480a1e73f27197dc59131d ] After next patch simple kfree() is not enough anymore, so add a helper for it. Reviewed-by: Stefano Brivio Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Stable-dep-of: 5a8cdf6fd860 ("netfilter: nft_set_pipapo: remove scratch_aligned pointer") Signed-off-by: Sasha Levin commit 1771e8347ff170933c3ba36120bb629de4eda5d0 Author: Florian Westphal Date: Wed Feb 7 21:52:46 2024 +0100 netfilter: nft_set_pipapo: store index in scratch maps [ Upstream commit 76313d1a4aa9e30d5b43dee5efd8bcd4d8250006 ] Pipapo needs a scratchpad area to keep state during matching. This state can be large and thus cannot reside on stack. Each set preallocates percpu areas for this. On each match stage, one scratchpad half starts with all-zero and the other is inited to all-ones. At the end of each stage, the half that starts with all-ones is always zero. Before next field is tested, pointers to the two halves are swapped, i.e. resmap pointer turns into fill pointer and vice versa. After the last field has been processed, pipapo stashes the index toggle in a percpu variable, with assumption that next packet will start with the all-zero half and sets all bits in the other to 1. This isn't reliable. There can be multiple sets and we can't be sure that the upper and lower half of all set scratch map is always in sync (lookups can be conditional), so one set might have swapped, but other might not have been queried. Thus we need to keep the index per-set-and-cpu, just like the scratchpad. Note that this bug fix is incomplete, there is a related issue. avx2 and normal implementation might use slightly different areas of the map array space due to the avx2 alignment requirements, so m->scratch (generic/fallback implementation) and ->scratch_aligned (avx) may partially overlap. scratch and scratch_aligned are not distinct objects, the latter is just the aligned address of the former. After this change, write to scratch_align->map_index may write to scratch->map, so this issue becomes more prominent, we can set to 1 a bit in the supposedly-all-zero area of scratch->map[]. A followup patch will remove the scratch_aligned and makes generic and avx code use the same (aligned) area. Its done in a separate change to ease review. Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit d1ec65c49e744cdaa0eb55c925d8c37f7e3049a8 Author: Pablo Neira Ayuso Date: Mon Feb 5 14:59:24 2024 +0100 netfilter: nft_ct: reject direction for ct id [ Upstream commit 38ed1c7062ada30d7c11e7a7acc749bf27aa14aa ] Direction attribute is ignored, reject it in case this ever needs to be supported Fixes: 3087c3f7c23b ("netfilter: nft_ct: Add ct id support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 730fce47e593890c2056e79865f563858719f195 Author: Pablo Neira Ayuso Date: Fri Feb 2 00:05:23 2024 +0100 netfilter: nft_compat: restrict match/target protocol to u16 [ Upstream commit d694b754894c93fb4d71a7f3699439dec111decc ] xt_check_{match,target} expects u16, but NFTA_RULE_COMPAT_PROTO is u32. NLA_POLICY_MAX(NLA_BE32, 65535) cannot be used because .max in nla_policy is s16, see 3e48be05f3c7 ("netlink: add attribute range validation to policy"). Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 78909916a22b5c15b2ef1582aedff84d6c7e05d2 Author: Pablo Neira Ayuso Date: Thu Feb 1 23:33:29 2024 +0100 netfilter: nft_compat: reject unused compat flag [ Upstream commit 292781c3c5485ce33bd22b2ef1b2bed709b4d672 ] Flag (1 << 0) is ignored is set, never used, reject it it with EINVAL instead. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit b06e067e93fa4b98acfd3a9f38a398ab91bbc58b Author: Eric Dumazet Date: Mon Feb 5 17:10:04 2024 +0000 ppp_async: limit MRU to 64K [ Upstream commit cb88cb53badb8aeb3955ad6ce80b07b598e310b8 ] syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K") Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU) [1]: WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events_unbound flush_to_ldisc pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537 sp : ffff800093967580 x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000 x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0 x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8 x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120 x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005 x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000 x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001 x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0 Call trace: __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926 __do_kmalloc_node mm/slub.c:3969 [inline] __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001 kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590 __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651 __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3235 [inline] dev_alloc_skb include/linux/skbuff.h:3248 [inline] ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline] ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341 tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Reviewed-by: Willem de Bruijn Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 19d7314f2fb9515bdaac9829d4d8eb34edd1fe95 Author: Shigeru Yoshida Date: Thu Feb 1 00:23:09 2024 +0900 tipc: Check the bearer type before calling tipc_udp_nl_bearer_add() [ Upstream commit 3871aa01e1a779d866fa9dfdd5a836f342f4eb87 ] syzbot reported the following general protection fault [1]: general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087] ... RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291 ... Call Trace: tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646 tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089 genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972 genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline] genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367 netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b The cause of this issue is that when tipc_nl_bearer_add() is called with the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called even if the bearer is not UDP. tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that the media_ptr field of the tipc_bearer has an udp_bearer type object, so the function goes crazy for non-UDP bearers. This patch fixes the issue by checking the bearer type before calling tipc_udp_nl_bearer_add() in tipc_nl_bearer_add(). Fixes: ef20cd4dd163 ("tipc: introduce UDP replicast") Reported-and-tested-by: syzbot+5142b87a9abc510e14fa@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5142b87a9abc510e14fa [1] Signed-off-by: Shigeru Yoshida Reviewed-by: Tung Nguyen Link: https://lore.kernel.org/r/20240131152310.4089541-1-syoshida@redhat.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 09e91f3e7e5c8f11ea8da2aaa4b4d62751428fe7 Author: David Howells Date: Fri Feb 2 15:19:15 2024 +0000 rxrpc: Fix response to PING RESPONSE ACKs to a dead call [ Upstream commit 6f769f22822aa4124b556339781b04d810f0e038 ] Stop rxrpc from sending a DUP ACK in response to a PING RESPONSE ACK on a dead call. We may have initiated the ping but the call may have beaten the response to completion. Fixes: 18bfeba50dfd ("rxrpc: Perform terminal call ACK/ABORT retransmission from conn processor") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 88081ba415224cf413101def4343d660f56d082b Author: Eric Dumazet Date: Fri Feb 2 09:54:04 2024 +0000 inet: read sk->sk_family once in inet_recv_error() [ Upstream commit eef00a82c568944f113f2de738156ac591bbd5cd ] inet_recv_error() is called without holding the socket lock. IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM socket option and trigger a KCSAN warning. Fixes: f4713a3dfad0 ("net-timestamp: make tcp_recvmsg call ipv6_recv_error for AF_INET6 socks") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 7e42379d29debfd23d437c876fb850edcac2f76f Author: Zhang Rui Date: Fri Feb 2 17:21:35 2024 +0800 hwmon: (coretemp) Fix bogus core_id to attr name mapping [ Upstream commit fdaf0c8629d4524a168cb9e4ad4231875749b28c ] Before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID value"), there is a fixed mapping between 1. cpu_core_id 2. the index in pdata->core_data[] array 3. the sysfs attr name, aka "tempX_" The later two always equal cpu_core_id + 2. After the commit, pdata->core_data[] index is got from ida so that it can handle sparse core ids and support more cores within a package. However, the commit erroneously maps the sysfs attr name to pdata->core_data[] index instead of cpu_core_id + 2. As a result, the code is not aligned with the comments, and brings user visible changes in hwmon sysfs on systems with sparse core id. For example, before commit 7108b80a542b ("hwmon/coretemp: Handle large core ID value"), /sys/class/hwmon/hwmon2/temp2_label:Core 0 /sys/class/hwmon/hwmon2/temp3_label:Core 1 /sys/class/hwmon/hwmon2/temp4_label:Core 2 /sys/class/hwmon/hwmon2/temp5_label:Core 3 /sys/class/hwmon/hwmon2/temp6_label:Core 4 /sys/class/hwmon/hwmon3/temp10_label:Core 8 /sys/class/hwmon/hwmon3/temp11_label:Core 9 after commit, /sys/class/hwmon/hwmon2/temp2_label:Core 0 /sys/class/hwmon/hwmon2/temp3_label:Core 1 /sys/class/hwmon/hwmon2/temp4_label:Core 2 /sys/class/hwmon/hwmon2/temp5_label:Core 3 /sys/class/hwmon/hwmon2/temp6_label:Core 4 /sys/class/hwmon/hwmon2/temp7_label:Core 8 /sys/class/hwmon/hwmon2/temp8_label:Core 9 Restore the previous behavior and rework the code, comments and variable names to avoid future confusions. Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value") Signed-off-by: Zhang Rui Link: https://lore.kernel.org/r/20240202092144.71180-3-rui.zhang@intel.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit f0da068c75c20ffc5ba28243ff577531dc2af1fd Author: Zhang Rui Date: Fri Feb 2 17:21:34 2024 +0800 hwmon: (coretemp) Fix out-of-bounds memory access [ Upstream commit 4e440abc894585a34c2904a32cd54af1742311b3 ] Fix a bug that pdata->cpu_map[] is set before out-of-bounds check. The problem might be triggered on systems with more than 128 cores per package. Fixes: 7108b80a542b ("hwmon/coretemp: Handle large core ID value") Signed-off-by: Zhang Rui Cc: Link: https://lore.kernel.org/r/20240202092144.71180-2-rui.zhang@intel.com Signed-off-by: Guenter Roeck Stable-dep-of: fdaf0c8629d4 ("hwmon: (coretemp) Fix bogus core_id to attr name mapping") Signed-off-by: Sasha Levin commit 9551de5caa2b97e94ef6ac32ba3f9ec231bd8cb8 Author: Loic Prylli Date: Fri Nov 3 11:30:55 2023 +0100 hwmon: (aspeed-pwm-tacho) mutex for tach reading [ Upstream commit 1168491e7f53581ba7b6014a39a49cfbbb722feb ] the ASPEED_PTCR_RESULT Register can only hold the result for a single fan input. Adding a mutex to protect the register until the reading is done. Signed-off-by: Loic Prylli Signed-off-by: Alexander Hansen Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Link: https://lore.kernel.org/r/121d888762a1232ef403cf35230ccf7b3887083a.1699007401.git.alexander.hansen@9elements.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit edfd328fe7bd6c0d4370cd009f3fec2285260784 Author: Zhipeng Lu Date: Thu Feb 1 20:41:05 2024 +0800 atm: idt77252: fix a memleak in open_card_ubr0 [ Upstream commit f3616173bf9be9bf39d131b120d6eea4e6324cb5 ] When alloc_scq fails, card->vcs[0] (i.e. vc) should be freed. Otherwise, in the following call chain: idt77252_init_one |-> idt77252_dev_open |-> open_card_ubr0 |-> alloc_scq [failed] |-> deinit_card |-> vfree(card->vcs); card->vcs is freed and card->vcs[0] is leaked. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhipeng Lu Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit e77bf828f1ca1c47fcff58bdc26b60a9d3dfbe1d Author: Antoine Tenart Date: Thu Feb 1 09:38:15 2024 +0100 tunnels: fix out of bounds access when building IPv6 PMTU error [ Upstream commit d75abeec401f8c86b470e7028a13fcdc87e5dd06 ] If the ICMPv6 error is built from a non-linear skb we get the following splat, BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240 Read of size 4 at addr ffff88811d402c80 by task netperf/820 CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543 ... kasan_report+0xd8/0x110 do_csum+0x220/0x240 csum_partial+0xc/0x20 skb_tunnel_check_pmtu+0xeb9/0x3280 vxlan_xmit_one+0x14c2/0x4080 vxlan_xmit+0xf61/0x5c00 dev_hard_start_xmit+0xfb/0x510 __dev_queue_xmit+0x7cd/0x32a0 br_dev_queue_push_xmit+0x39d/0x6a0 Use skb_checksum instead of csum_partial who cannot deal with non-linear SKBs. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Antoine Tenart Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit fd473100bfed97ecdee1ce5178714b28e94457cb Author: Paolo Abeni Date: Thu Feb 1 19:42:41 2024 +0100 selftests: net: avoid just another constant wait [ Upstream commit 691bb4e49c98a47bc643dd808453136ce78b15b4 ] Using hard-coded constant timeout to wait for some expected event is deemed to fail sooner or later, especially in slow env. Our CI has spotted another of such race: # TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL] # can't delete veth device in a timely manner, PMTU dst likely leaked Replace the crude sleep with a loop looking for the expected condition at low interval for a much longer range. Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup") Signed-off-by: Paolo Abeni Reviewed-by: David Ahern Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 2fc45a4631ac7837a5c497cb4f7e2115d950fc37 Author: Furong Xu <0x1207@gmail.com> Date: Wed Jan 31 10:08:28 2024 +0800 net: stmmac: xgmac: fix handling of DPP safety error for DMA channels [ Upstream commit 46eba193d04f8bd717e525eb4110f3c46c12aec3 ] Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 66c8243e6130b81d955c17b616faf96c8b3bd18c Author: Kuogee Hsieh Date: Wed Jan 17 13:13:30 2024 -0800 drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case [ Upstream commit fcccdafd91f8bdde568b86ff70848cf83f029add ] MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field. dp_link_get_colorimetry_config() returns wrong colorimetry value in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation. Hence fix this problem by having dp_link_get_colorimetry_config() return defined CEA RGB colorimetry value in the case of DP_TEST_DYNAMIC_RANGE_CEA. Changes in V2: -- drop retrieving colorimetry from colorspace -- drop dr = link->dp_link.test_video.test_dyn_range assignment Changes in V3: -- move defined MISCr0a Colorimetry vale to dp_reg.h -- rewording commit title -- rewording commit text to more precise describe this patch Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/574888/ Link: https://lore.kernel.org/r/1705526010-597-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin commit be3b82e4871ba00e9b5d0ede92d396d579d7b3b3 Author: Tony Lindgren Date: Sun Jan 28 14:05:54 2024 +0200 phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP [ Upstream commit 7104ba0f1958adb250319e68a15eff89ec4fd36d ] If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 784d3154823625c9a63967378bfc08d20a42f2c9 Author: Frank Li Date: Tue Jan 23 12:28:41 2024 -0500 dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEV [ Upstream commit a22fe1d6dec7e98535b97249fdc95c2be79120bb ] is_slave_direction() should return true when direction is DMA_DEV_TO_DEV. Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 68459d2b0c212439ea54fc5698d4c6555f389fa4 Author: Yoshihiro Shimoda Date: Fri Jan 5 18:37:03 2024 +0900 phy: renesas: rcar-gen3-usb2: Fix returning wrong error code [ Upstream commit 249abaf3bf0dd07f5ddebbb2fe2e8f4d675f074e ] Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/ Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit ae6769ba51417c1c86fb645812d5bff455eee802 Author: Christophe JAILLET Date: Sun Jan 7 11:02:04 2024 +0100 dmaengine: fsl-qdma: Fix a memory leak related to the queue command DMA [ Upstream commit 3aa58cb51318e329d203857f7a191678e60bb714 ] This dma_alloc_coherent() is undone neither in the remove function, nor in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix both issues. Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/7f66aa14f59d32b13672dde28602b47deb294e1f.1704621515.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit fbe1c5c6a8a2f97522707c6abdda3c4c61e0ffe1 Author: Christophe JAILLET Date: Sun Jan 7 11:02:03 2024 +0100 dmaengine: fsl-qdma: Fix a memory leak related to the status queue DMA [ Upstream commit 968bc1d7203d384e72afe34124a1801b7af76514 ] This dma_alloc_coherent() is undone in the remove function, but not in the error handling path of fsl_qdma_probe(). Switch to the managed version to fix the issue in the probe and simplify the remove function. Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/a0ef5d0f5a47381617ef339df776ddc68ce48173.1704621515.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 3496a1da711ef1eaae224ae881996516f04005c9 Author: Jai Luthra Date: Wed Jan 3 14:37:55 2024 +0530 dmaengine: ti: k3-udma: Report short packet errors [ Upstream commit bc9847c9ba134cfe3398011e343dcf6588c1c902 ] Propagate the TR response status to the device using BCDMA split-channels. For example CSI-RX driver should be able to check if a frame was not transferred completely (short packet) and needs to be discarded. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Signed-off-by: Jai Luthra Acked-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20240103-tr_resp_err-v1-1-2fdf6d48ab92@ti.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit b7dbf4115bd8d52672832f2a31e38225022d12ff Author: Guanhua Gao Date: Thu Jan 18 11:29:16 2024 -0500 dmaengine: fsl-dpaa2-qdma: Fix the size of dma pools [ Upstream commit b73e43dcd7a8be26880ef8ff336053b29e79dbc5 ] In case of long format of qDMA command descriptor, there are one frame descriptor, three entries in the frame list and two data entries. So the size of dma_pool_create for these three fields should be the same with the total size of entries respectively, or the contents may be overwritten by the next allocated descriptor. Fixes: 7fdf9b05c73b ("dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs") Signed-off-by: Guanhua Gao Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20240118162917.2951450-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 6db18971f73a8312ec547c32274c398e6ca36e14 Author: Rafael J. Wysocki Date: Thu Dec 16 20:30:18 2021 +0100 PM: sleep: Fix error handling in dpm_prepare() [ Upstream commit 544e737dea5ad1a457f25dbddf68761ff25e028b ] Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx") forgot to update the while () loop termination condition to also break the loop if error is nonzero, which causes the loop to become infinite if device_prepare() returns an error for one device. Add the missing !error check. Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx") Signed-off-by: Rafael J. Wysocki Reported-by: Thomas Hellström Reviewed-by: Thomas Hellström Reviewed-by: Ulf Hansson Cc: All applicable Signed-off-by: Sasha Levin commit 6388d0e3200dd496c19b31aa44827a01b134197a Author: Alexey Dobriyan Date: Tue Sep 12 19:22:24 2023 +0300 uapi: stddef.h: Fix __DECLARE_FLEX_ARRAY for C++ [ Upstream commit 32a4ec211d4164e667d9d0b807fadf02053cd2e9 ] __DECLARE_FLEX_ARRAY(T, member) macro expands to struct { struct {} __empty_member; T member[]; }; which is subtly wrong in C++ because sizeof(struct{}) is 1 not 0, changing UAPI structures layouts. This can be fixed by expanding to T member[]; Now g++ doesn't like "T member[]" either, throwing errors on the following code: struct S { union { T1 member1[]; T2 member2[]; }; }; or struct S { T member[]; }; Use "T member[0];" which seems to work and does the right thing wrt structure layout. Signed-off-by: Alexey Dobriyan Fixes: 3080ea5553cc ("stddef: Introduce DECLARE_FLEX_ARRAY() helper") Link: https://lore.kernel.org/r/97242381-f1ec-4a4a-9472-1a464f575657@p183 Signed-off-by: Kees Cook Signed-off-by: Sasha Levin commit 2563e7c6877d0ba5ca02ec6e4d23a86b862dcad4 Author: Zhengchao Shao Date: Thu Nov 23 09:55:15 2023 +0800 bonding: remove print in bond_verify_device_path commit 486058f42a4728053ae69ebbf78e9731d8ce6f8b upstream. As suggested by Paolo in link[1], if the memory allocation fails, the mm layer will emit a lot warning comprising the backtrace, so remove the print. [1] https://lore.kernel.org/all/20231118081653.1481260-1-shaozhengchao@huawei.com/ Suggested-by: Paolo Abeni Signed-off-by: Zhengchao Shao Reviewed-by: Hangbin Liu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit d1a9900e644291eb4c360e45a49985fe923cde9f Author: Benjamin Berg Date: Mon Nov 8 13:50:38 2021 +0100 HID: apple: Add 2021 magic keyboard FN key mapping commit 531cb56972f2773c941499fcfb639cd5128dfb27 upstream. The new 2021 apple models have a different FN key assignment. Add a new translation table and use that for the 2021 magic keyboard. Signed-off-by: Benjamin Berg Signed-off-by: Jiri Kosina Cc: Aseda Aboagye Signed-off-by: Greg Kroah-Hartman commit b1e3ea7c48a5e098407469439e2873635535672c Author: Alex Henrie Date: Fri Oct 8 01:37:01 2021 -0600 HID: apple: Add support for the 2021 Magic Keyboard commit 0cd3be51733febb4f8acb92bcf55b75fe824dd05 upstream. Signed-off-by: Alex Henrie Signed-off-by: Jiri Kosina Cc: Aseda Aboagye Signed-off-by: Greg Kroah-Hartman commit e5eca7954aacd16ab2f4e990ef64e64c968f9073 Author: Breno Leitao Date: Wed Jan 31 02:21:49 2024 -0800 net: sysfs: Fix /sys/class/net/ path [ Upstream commit ae3f4b44641dfff969604735a0dcbf931f383285 ] The documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/, instead of /sys/class/net/. Fix it by adding the `net/` directory before the interface. Fixes: 1a02ef76acfa ("net: sysfs: add documentation entries for /sys/class//queues") Signed-off-by: Breno Leitao Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit f199018dc762dfa501f6d96a424468a0f3c10d9e Author: Eric Dumazet Date: Tue Jan 30 18:42:35 2024 +0000 af_unix: fix lockdep positive in sk_diag_dump_icons() [ Upstream commit 4d322dce82a1d44f8c83f0f54f95dd1b8dcf46c9 ] syzbot reported a lockdep splat [1]. Blamed commit hinted about the possible lockdep violation, and code used unix_state_lock_nested() in an attempt to silence lockdep. It is not sufficient, because unix_state_lock_nested() is already used from unix_state_double_lock(). We need to use a separate subclass. This patch adds a distinct enumeration to make things more explicit. Also use swap() in unix_state_double_lock() as a clean up. v2: add a missing inline keyword to unix_state_lock_nested() [1] WARNING: possible circular locking dependency detected 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Not tainted syz-executor.1/2542 is trying to acquire lock: ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 but task is already holding lock: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&u->lock/1){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 _raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378 sk_diag_dump_icons net/unix/diag.c:87 [inline] sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157 sk_diag_dump net/unix/diag.c:196 [inline] unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220 netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319 sock_diag_rcv_msg+0xe3/0x400 netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x39a/0x520 net/socket.c:1160 call_write_iter include/linux/fs.h:2085 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa74/0xca0 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b -> #0 (rlock-AF_UNIX){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&u->lock/1); lock(rlock-AF_UNIX); lock(&u->lock/1); lock(rlock-AF_UNIX); *** DEADLOCK *** 1 lock held by syz-executor.1/2542: #0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 stack backtrace: CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f26d887cda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9 RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004 RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68 Fixes: 2aac7a2cb0d9 ("unix_diag: Pending connections IDs NLA") Reported-by: syzbot Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 9c9cab01c7a36c6afdf8fa54b343d72a7ce1b511 Author: Zhipeng Lu Date: Mon Jan 29 17:10:17 2024 +0800 net: ipv4: fix a memleak in ip_setup_cork [ Upstream commit 5dee6d6923458e26966717f2a3eae7d09fc10bf6 ] When inetdev_valid_mtu fails, cork->opt should be freed if it is allocated in ip_setup_cork. Otherwise there could be a memleak. Fixes: 501a90c94510 ("inet: protect against too small mtu values.") Signed-off-by: Zhipeng Lu Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240129091017.2938835-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 65ee90efc928410c6f73b3d2e0afdd762652c09d Author: Pablo Neira Ayuso Date: Mon Jan 29 13:12:33 2024 +0100 netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations [ Upstream commit 8059918a1377f2f1fff06af4f5a4ed3d5acd6bc4 ] - Disallow families other than NFPROTO_{IPV4,IPV6,INET}. - Disallow layer 4 protocol with no ports, since destination port is a mandatory attribute for this object. Fixes: 857b46027d6f ("netfilter: nft_ct: add ct expectations support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 32fa7abb18b0660953055e84b7ed2bc5a201c0a8 Author: Pablo Neira Ayuso Date: Mon Jan 29 11:09:43 2024 +0100 netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger [ Upstream commit 259eb32971e9eb24d1777a28d82730659f50fdcb ] Module reference is bumped for each user, this should not ever happen. But BUG_ON check should use rcu_access_pointer() instead. If this ever happens, do WARN_ON_ONCE() instead of BUG_ON() and consolidate pointer check under the rcu read side lock section. Fixes: fab4085f4e24 ("netfilter: log: nf_log_packet() as real unified interface") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit d0b5b1f12429df3cd9751ab8b2f53729b77733b7 Author: Eric Dumazet Date: Fri Jan 26 16:55:32 2024 +0000 llc: call sock_orphan() at release time [ Upstream commit aa2b2eb3934859904c287bf5434647ba72e14c1c ] syzbot reported an interesting trace [1] caused by a stale sk->sk_wq pointer in a closed llc socket. In commit ff7b11aa481f ("net: socket: set sock->sk to NULL after calling proto_ops::release()") Eric Biggers hinted that some protocols are missing a sock_orphan(), we need to perform a full audit. In net-next, I plan to clear sock->sk from sock_orphan() and amend Eric patch to add a warning. [1] BUG: KASAN: slab-use-after-free in list_empty include/linux/list.h:373 [inline] BUG: KASAN: slab-use-after-free in waitqueue_active include/linux/wait.h:127 [inline] BUG: KASAN: slab-use-after-free in sock_def_write_space_wfree net/core/sock.c:3384 [inline] BUG: KASAN: slab-use-after-free in sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 Read of size 8 at addr ffff88802f4fc880 by task ksoftirqd/1/27 CPU: 1 PID: 27 Comm: ksoftirqd/1 Not tainted 6.8.0-rc1-syzkaller-00049-g6098d87eaf31 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 list_empty include/linux/list.h:373 [inline] waitqueue_active include/linux/wait.h:127 [inline] sock_def_write_space_wfree net/core/sock.c:3384 [inline] sock_wfree+0x9a8/0x9d0 net/core/sock.c:2468 skb_release_head_state+0xa3/0x2b0 net/core/skbuff.c:1080 skb_release_all net/core/skbuff.c:1092 [inline] napi_consume_skb+0x119/0x2b0 net/core/skbuff.c:1404 e1000_unmap_and_free_tx_resource+0x144/0x200 drivers/net/ethernet/intel/e1000/e1000_main.c:1970 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3860 [inline] e1000_clean+0x4a1/0x26e0 drivers/net/ethernet/intel/e1000/e1000_main.c:3801 __napi_poll.constprop.0+0xb4/0x540 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x956/0xe90 net/core/dev.c:6778 __do_softirq+0x21a/0x8de kernel/softirq.c:553 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x31/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x660/0xa10 kernel/smpboot.c:164 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Allocated by task 5167: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_lru+0x142/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 0: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x121/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kmem_cache_free+0x129/0x350 mm/slub.c:4363 i_callback+0x43/0x70 fs/inode.c:249 rcu_do_batch kernel/rcu/tree.c:2158 [inline] rcu_core+0x819/0x1680 kernel/rcu/tree.c:2433 __do_softirq+0x21a/0x8de kernel/softirq.c:553 Last potentially related work creation: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 __kasan_record_aux_stack+0xba/0x100 mm/kasan/generic.c:586 __call_rcu_common.constprop.0+0x9a/0x7b0 kernel/rcu/tree.c:2683 destroy_inode+0x129/0x1b0 fs/inode.c:315 iput_final fs/inode.c:1739 [inline] iput.part.0+0x560/0x7b0 fs/inode.c:1765 iput+0x5c/0x80 fs/inode.c:1755 dentry_unlink_inode+0x292/0x430 fs/dcache.c:400 __dentry_kill+0x1ca/0x5f0 fs/dcache.c:603 dput.part.0+0x4ac/0x9a0 fs/dcache.c:845 dput+0x1f/0x30 fs/dcache.c:835 __fput+0x3b9/0xb70 fs/file_table.c:384 task_work_run+0x14d/0x240 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b The buggy address belongs to the object at ffff88802f4fc800 which belongs to the cache sock_inode_cache of size 1408 The buggy address is located 128 bytes inside of freed 1408-byte region [ffff88802f4fc800, ffff88802f4fcd80) The buggy address belongs to the physical page: page:ffffea0000bd3e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2f4f8 head:ffffea0000bd3e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0xfff00000000840(slab|head|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000840 ffff888013b06b40 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Reclaimable, gfp_mask 0xd20d0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_RECLAIMABLE), pid 4956, tgid 4956 (sshd), ts 31423924727, free_ts 0 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x2d0/0x350 mm/page_alloc.c:1533 prep_new_page mm/page_alloc.c:1540 [inline] get_page_from_freelist+0xa28/0x3780 mm/page_alloc.c:3311 __alloc_pages+0x22f/0x2440 mm/page_alloc.c:4567 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] alloc_slab_page mm/slub.c:2190 [inline] allocate_slab mm/slub.c:2354 [inline] new_slab+0xcc/0x3a0 mm/slub.c:2407 ___slab_alloc+0x4af/0x19a0 mm/slub.c:3540 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3625 __slab_alloc_node mm/slub.c:3678 [inline] slab_alloc_node mm/slub.c:3850 [inline] kmem_cache_alloc_lru+0x379/0x6f0 mm/slub.c:3879 alloc_inode_sb include/linux/fs.h:3019 [inline] sock_alloc_inode+0x25/0x1c0 net/socket.c:308 alloc_inode+0x5d/0x220 fs/inode.c:260 new_inode_pseudo+0x16/0x80 fs/inode.c:1005 sock_alloc+0x40/0x270 net/socket.c:634 __sock_create+0xbc/0x800 net/socket.c:1535 sock_create net/socket.c:1622 [inline] __sys_socket_create net/socket.c:1659 [inline] __sys_socket+0x14c/0x260 net/socket.c:1706 __do_sys_socket net/socket.c:1720 [inline] __se_sys_socket net/socket.c:1718 [inline] __x64_sys_socket+0x72/0xb0 net/socket.c:1718 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd3/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b page_owner free stack trace missing Memory state around the buggy address: ffff88802f4fc780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88802f4fc800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88802f4fc880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88802f4fc900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88802f4fc980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 43815482370c ("net: sock_def_readable() and friends RCU conversion") Reported-and-tested-by: syzbot+32b89eaa102b372ff76d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Cc: Eric Biggers Cc: Kuniyuki Iwashima Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20240126165532.3396702-1-edumazet@google.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit e34c91e7e8a305fcfe404b47945bf2ff626571bf Author: Helge Deller Date: Fri Jan 26 09:32:20 2024 +0100 ipv6: Ensure natural alignment of const ipv6 loopback and router addresses [ Upstream commit 60365049ccbacd101654a66ddcb299abfabd4fc5 ] On a parisc64 kernel I sometimes notice this kernel warning: Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8 The address 0x40ff8814 points to the in6addr_linklocal_allrouters variable and the warning simply means that some ipv6 function tries to read a 64-bit word directly from the not-64-bit aligned in6addr_linklocal_allrouters variable. Unaligned accesses are non-critical as the architecture or exception handlers usually will fix it up at runtime. Nevertheless it may trigger a performance penality for some architectures. For details read the "unaligned-memory-access" kernel documentation. The patch below ensures that the ipv6 loopback and router addresses will always be naturally aligned. This prevents the unaligned accesses for all architectures. Signed-off-by: Helge Deller Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules") Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100 Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit b45fae96bd1eae1ccf9c70da4c03a6b2627e4205 Author: Christophe JAILLET Date: Sat Jan 20 18:25:36 2024 +0100 ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550() [ Upstream commit bbc404d20d1b46d89b461918bc44587620eda200 ] All error handling paths, except this one, go to 'out' where release_swfw_sync() is called. This call balances the acquire_swfw_sync() call done at the beginning of the function. Branch to the error handling path in order to correctly release some resources in case of error. Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues") Signed-off-by: Christophe JAILLET Reviewed-by: Simon Horman Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit f8bccfa175a5a5c13258e8f34194a803e75f3895 Author: Jedrzej Jagielski Date: Mon Dec 18 11:39:25 2023 +0100 ixgbe: Refactor overtemp event handling [ Upstream commit 6c1b4af8c1b20c70dde01e58381685d6a4a1d2c8 ] Currently ixgbe driver is notified of overheating events via internal IXGBE_ERR_OVERTEMP error code. Change the approach for handle_lasi() to use freshly introduced is_overtemp function parameter which set when such event occurs. Change check_overtemp() to bool and return true if overtemp event occurs. Reviewed-by: Przemek Kitszel Signed-off-by: Jedrzej Jagielski Reviewed-by: Jacob Keller Reviewed-by: Simon Horman Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit e16c254f60d31f6389af6137ba454aa60d0dd768 Author: Jedrzej Jagielski Date: Mon Dec 18 11:39:26 2023 +0100 ixgbe: Refactor returning internal error codes [ Upstream commit 5795f533f30a80aa0473652876296ebc9129e33a ] Change returning codes to the kernel ones instead of the internal ones for the entire ixgbe driver. Reviewed-by: Jacob Keller Reviewed-by: Przemek Kitszel Reviewed-by: Simon Horman Signed-off-by: Jedrzej Jagielski Tested-by: Sunitha Mekala (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin commit 2499c0661b18a07ccb7feca5ad6d0a4715a0fe7c Author: Piotr Skajewski Date: Tue Jan 11 11:27:23 2022 +0100 ixgbe: Remove non-inclusive language [ Upstream commit 93b067f154b3edfd3d75a272fd9433bf787e2e1d ] Remove non-inclusive language from the driver. Additionally correct the duplication "from from" reported by checkpatch after the changes above. Signed-off-by: Piotr Skajewski Tested-by: Dave Switzer Signed-off-by: Tony Nguyen Stable-dep-of: bbc404d20d1b ("ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()") Signed-off-by: Sasha Levin commit f48bf9a83b1666d934247cb58a9887d7b3127b6f Author: Eric Dumazet Date: Thu Jan 25 10:33:17 2024 +0000 tcp: add sanity checks to rx zerocopy [ Upstream commit 577e4432f3ac810049cb7e6b71f4d96ec7c6e894 ] TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page->mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) Fixes: 93ab6cc69162 ("tcp: implement mmap() for zero copy receive") Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/ Reported-and-bisected-by: ZhangPeng Signed-off-by: Eric Dumazet Cc: Arjun Roy Cc: Matthew Wilcox Cc: linux-mm@vger.kernel.org Cc: Andrew Morton Cc: linux-fsdevel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 14690e419bb37c81dd7a4bf23daa1097773ecf01 Author: Arjun Roy Date: Wed Dec 2 14:53:45 2020 -0800 net-zerocopy: Refactor frag-is-remappable test. [ Upstream commit 98917cf0d6eda01e8c3c34d35398d46b247b6fd3 ] Refactor frag-is-remappable test for tcp receive zerocopy. This is part of a patch set that introduces short-circuited hybrid copies for small receive operations, which results in roughly 33% fewer syscalls for small RPC scenarios. Signed-off-by: Arjun Roy Signed-off-by: Eric Dumazet Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Jakub Kicinski Stable-dep-of: 577e4432f3ac ("tcp: add sanity checks to rx zerocopy") Signed-off-by: Sasha Levin commit a9bc32879a08f23cdb80a48c738017e39aea1080 Author: Eric Dumazet Date: Thu Jan 25 17:05:57 2024 +0000 ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() [ Upstream commit 8d975c15c0cd744000ca386247432d57b21f9df0 ] syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Reported-by: syzbot Signed-off-by: Eric Dumazet Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240125170557.2663942-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit a57b114a84f85e7e3c10260c4ffc04558d0a86f6 Author: Eric Dumazet Date: Wed Jun 8 08:46:35 2022 -0700 ip6_tunnel: use dev_sw_netstats_rx_add() [ Upstream commit afd2051b18404640a116fd3bb2460da214ccbda4 ] We have a convenient helper, let's use it. Signed-off-by: Eric Dumazet Signed-off-by: Jakub Kicinski Stable-dep-of: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") Signed-off-by: Sasha Levin commit f5944853f7a961fedc1227dc8f60393f8936d37c Author: Ming Lei Date: Fri Jan 12 15:00:00 2024 +0800 scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler [ Upstream commit 4373534a9850627a2695317944898eb1283a2db0 ] Inside scsi_eh_wakeup(), scsi_host_busy() is called & checked with host lock every time for deciding if error handler kthread needs to be waken up. This can be too heavy in case of recovery, such as: - N hardware queues - queue depth is M for each hardware queue - each scsi_host_busy() iterates over (N * M) tag/requests If recovery is triggered in case that all requests are in-flight, each scsi_eh_wakeup() is strictly serialized, when scsi_eh_wakeup() is called for the last in-flight request, scsi_host_busy() has been run for (N * M - 1) times, and request has been iterated for (N*M - 1) * (N * M) times. If both N and M are big enough, hard lockup can be triggered on acquiring host lock, and it is observed on mpi3mr(128 hw queues, queue depth 8169). Fix the issue by calling scsi_host_busy() outside the host lock. We don't need the host lock for getting busy count because host the lock never covers that. [mkp: Drop unnecessary 'busy' variables pointed out by Bart] Cc: Ewan Milne Fixes: 6eb045e092ef ("scsi: core: avoid host-wide host_busy counter for scsi_mq") Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20240112070000.4161982-1-ming.lei@redhat.com Reviewed-by: Ewan D. Milne Reviewed-by: Sathya Prakash Veerichetty Tested-by: Sathya Prakash Veerichetty Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 7efadce40a6b173193888ac8392442beda666620 Author: Bart Van Assche Date: Thu Apr 15 15:08:11 2021 -0700 scsi: core: Introduce enum scsi_disposition [ Upstream commit b8e162f9e7e2da6e823a4984d6aa0523e278babf ] Improve readability of the code in the SCSI core by introducing an enumeration type for the values used internally that decide how to continue processing a SCSI command. The eh_*_handler return values have not been changed because that would involve modifying all SCSI drivers. The output of the following command has been inspected to verify that no out-of-range values are assigned to a variable of type enum scsi_disposition: KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/ Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org Cc: Christoph Hellwig Cc: Johannes Thumshirn Cc: Hannes Reinecke Cc: Daniel Wagner Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Stable-dep-of: 4373534a9850 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler") Signed-off-by: Sasha Levin commit dca11bfa01259c4c2a9fe5c9fb4ec2e88646fca2 Author: Su Hui Date: Fri Jan 12 12:19:27 2024 +0800 scsi: isci: Fix an error code problem in isci_io_request_build() [ Upstream commit 658365c6b0857e6a306436e315a8633937e3af42 ] Clang static complains that Value stored to 'status' is never read. Return 'status' rather than 'SCI_SUCCESS'. Fixes: f1f52e75939b ("isci: uplevel request infrastructure") Signed-off-by: Su Hui Link: https://lore.kernel.org/r/20240112041926.3924315-1-suhui@nfschina.com Reviewed-by: Artur Paszkiewicz Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 948090f66aed1e81860154cb09cd28eefd2815b8 Author: Stephen Rothwell Date: Tue Dec 19 14:57:34 2023 +1100 drm: using mul_u32_u32() requires linux/math64.h [ Upstream commit 933a2a376fb3f22ba4774f74233571504ac56b02 ] Some pending include file cleanups produced this error: In file included from include/linux/kernel.h:27, from drivers/gpu/ipu-v3/ipu-dp.c:7: include/drm/drm_color_mgmt.h: In function 'drm_color_lut_extract': include/drm/drm_color_mgmt.h:45:46: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration] 45 | return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(user_input, (1 << bit_precision) - 1), | ^~~~~~~~~~~ Fixes: c6fbb6bca108 ("drm: Fix color LUT rounding") Signed-off-by: Stephen Rothwell Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231219145734.13e40e1e@canb.auug.org.au Signed-off-by: Sasha Levin commit 02161f622df3b9a3016cb4e0a7c320cdfc2c9933 Author: Edward Adam Davis Date: Wed Jan 3 20:13:51 2024 +0800 wifi: cfg80211: fix RCU dereference in __cfg80211_bss_update [ Upstream commit 1184950e341c11b6f82bc5b59564411d9537ab27 ] Replace rcu_dereference() with rcu_access_pointer() since we hold the lock here (and aren't in an RCU critical section). Fixes: 32af9a9e1069 ("wifi: cfg80211: free beacon_ies when overridden from hidden BSS") Reported-and-tested-by: syzbot+864a269c27ee06b58374@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Link: https://msgid.link/tencent_BF8F0DF0258C8DBF124CDDE4DD8D992DCF07@qq.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit b54eecdc08d43233d6e47a742026addfb7a7c43d Author: Peter Zijlstra Date: Wed Nov 22 11:07:56 2023 +0100 perf: Fix the nr_addr_filters fix [ Upstream commit 388a1fb7da6aaa1970c7e2a7d7fcd983a87a8484 ] Thomas reported that commit 652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file") made the entire attribute group vanish, instead of only the nr_addr_filters attribute. Additionally a stray return. Insufficient coffee was involved with both writing and merging the patch. Fixes: 652ffc2104ec ("perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file") Reported-by: Thomas Richter Signed-off-by: Peter Zijlstra (Intel) Tested-by: Thomas Richter Link: https://lkml.kernel.org/r/20231122100756.GP8262@noisy.programming.kicks-ass.net Signed-off-by: Sasha Levin commit 73eda26931175f5d4ed8d8921786e524e553dcbd Author: Srinivasan Shanmugam Date: Thu Dec 21 18:13:11 2023 +0530 drm/amdgpu: Release 'adev->pm.fw' before return in 'amdgpu_device_need_post()' [ Upstream commit 8a44fdd3cf91debbd09b43bd2519ad2b2486ccf4 ] In function 'amdgpu_device_need_post(struct amdgpu_device *adev)' - 'adev->pm.fw' may not be released before return. Using the function release_firmware() to release adev->pm.fw. Thus fixing the below: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1571 amdgpu_device_need_post() warn: 'adev->pm.fw' from request_firmware() not released on lines: 1554. Cc: Monk Liu Cc: Christian König Cc: Alex Deucher Signed-off-by: Srinivasan Shanmugam Suggested-by: Lijo Lazar Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit feacc800407cf445ca2ec86044ec4f1d9d766f8e Author: Srinivasan Shanmugam Date: Fri Jan 5 12:05:09 2024 +0530 drm/amd/powerplay: Fix kzalloc parameter 'ATOM_Tonga_PPM_Table' in 'get_platform_power_management_table()' [ Upstream commit 6616b5e1999146b1304abe78232af810080c67e3 ] In 'struct phm_ppm_table *ptr' allocation using kzalloc, an incorrect structure type is passed to sizeof() in kzalloc, larger structure types were used, thus using correct type 'struct phm_ppm_table' fixes the below: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/process_pptables_v1_0.c:203 get_platform_power_management_table() warn: struct type mismatch 'phm_ppm_table vs _ATOM_Tonga_PPM_Table' Cc: Eric Huang Cc: Christian König Cc: Alex Deucher Signed-off-by: Srinivasan Shanmugam Acked-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit e016e358461b89b231626fcf78c5c38e35c44fd3 Author: Xiubo Li Date: Fri Nov 17 13:26:18 2023 +0800 ceph: fix deadlock or deadcode of misusing dget() [ Upstream commit b493ad718b1f0357394d2cdecbf00a44a36fa085 ] The lock order is incorrect between denty and its parent, we should always make sure that the parent get the lock first. But since this deadcode is never used and the parent dir will always be set from the callers, let's just remove it. Link: https://lore.kernel.org/r/20231116081919.GZ1957730@ZenIV Reported-by: Al Viro Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 7610ba1319253225a9ba8a9d28d472fc883b4e2f Author: Ming Lei Date: Fri Jan 12 20:26:26 2024 +0800 blk-mq: fix IO hang from sbitmap wakeup race [ Upstream commit 5266caaf5660529e3da53004b8b7174cab6374ed ] In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered with the following blk_mq_get_driver_tag() in case of getting driver tag failure. Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime blk_mq_mark_tag_wait() can't get driver tag successfully. This issue can be reproduced by running the following test in loop, and fio hang can be observed in < 30min when running it on my test VM in laptop. modprobe -r scsi_debug modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4 dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \ --runtime=100 --numjobs=40 --time_based --name=test \ --ioengine=libaio Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which is just fine in case of running out of tag. Cc: Jan Kara Cc: Kemeng Shi Reported-by: Changhui Zhong Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@redhat.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 27ae156e638d1340582bfc1e25b3a1e9e23666cd Author: Zhu Yanjun Date: Thu Jan 4 10:09:02 2024 +0800 virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings [ Upstream commit e3fe8d28c67bf6c291e920c6d04fa22afa14e6e4 ] Fix the warnings when building virtio_net driver. " drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~ drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~~~~~~~~~~ drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16 4552 | sprintf(vi->sq[i].name, "output.%d", i); " Reviewed-by: Xuan Zhuo Signed-off-by: Zhu Yanjun Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 0079078f5ee87036e3b0218f760e0390dec2b211 Author: Ian Rogers Date: Thu Dec 7 16:05:13 2023 -0800 libsubcmd: Fix memory leak in uniq() [ Upstream commit ad30469a841b50dbb541df4d6971d891f703c297 ] uniq() will write one command name over another causing the overwritten string to be leaked. Fix by doing a pass that removes duplicates and a second that removes the holes. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Chenyuan Mi Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20231208000515.1693746-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 32a82437884160742b3ee4116a780f3c0f02d483 Author: Bjorn Helgaas Date: Wed Dec 6 16:42:30 2023 -0600 PCI/AER: Decode Requester ID when no error info found [ Upstream commit 1291b716bbf969e101d517bfb8ba18d958f758b8 ] When a device with AER detects an error, it logs error information in its own AER Error Status registers. It may send an Error Message to the Root Port (RCEC in the case of an RCiEP), which logs the fact that an Error Message was received (Root Error Status) and the Requester ID of the message source (Error Source Identification). aer_print_port_info() prints the Requester ID from the Root Port Error Source in the usual Linux "bb:dd.f" format, but when find_source_device() finds no error details in the hierarchy below the Root Port, it printed the raw Requester ID without decoding it. Decode the Requester ID in the usual Linux format so it matches other messages. Sample message changes: - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5 - pcieport 0000:00:1c.5: AER: can't find device of ID00e5 + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5 + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5 Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas Reviewed-by: Jonathan Cameron Reviewed-by: Kuppuswamy Sathyanarayanan Signed-off-by: Sasha Levin commit feaf0752b31077b4fec861fafe3ae581428cbc82 Author: Max Kellermann Date: Fri Dec 8 10:33:10 2023 +0100 fs/kernfs/dir: obey S_ISGID [ Upstream commit 5133bee62f0ea5d4c316d503cc0040cac5637601 ] Handling of S_ISGID is usually done by inode_init_owner() in all other filesystems, but kernfs doesn't use that function. In kernfs, struct kernfs_node is the primary data structure, and struct inode is only created from it on demand. Therefore, inode_init_owner() can't be used and we need to imitate its behavior. S_ISGID support is useful for the cgroup filesystem; it allows subtrees managed by an unprivileged process to retain a certain owner gid, which then enables sharing access to the subtree with another unprivileged process. -- v1 -> v2: minor coding style fix (comment) Signed-off-by: Max Kellermann Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20231208093310.297233-2-max.kellermann@ionos.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6f921430b07a73c04e6176998a41da03403860f7 Author: Adrian Reber Date: Fri Dec 8 15:36:56 2023 +0100 tty: allow TIOCSLCKTRMIOS with CAP_CHECKPOINT_RESTORE [ Upstream commit e0f25b8992345aa5f113da2815f5add98738c611 ] The capability CAP_CHECKPOINT_RESTORE was introduced to allow non-root users to checkpoint and restore processes as non-root with CRIU. This change extends CAP_CHECKPOINT_RESTORE to enable the CRIU option '--shell-job' as non-root. CRIU's man-page describes the '--shell-job' option like this: Allow one to dump shell jobs. This implies the restored task will inherit session and process group ID from the criu itself. This option also allows to migrate a single external tty connection, to migrate applications like top. TIOCSLCKTRMIOS can only be done if the process has CAP_SYS_ADMIN and this change extends it to CAP_SYS_ADMIN or CAP_CHECKPOINT_RESTORE. With this change it is possible to checkpoint and restore processes which have a tty connection as non-root if CAP_CHECKPOINT_RESTORE is set. Acked-by: Christian Brauner Signed-off-by: Adrian Reber Acked-by: Andrei Vagin Link: https://lore.kernel.org/r/20231208143656.1019-1-areber@redhat.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit e962b59d374981a2895097efb46ef3950e9e40de Author: Hardik Gajjar Date: Tue Dec 5 19:18:28 2023 +0100 usb: hub: Replace hardcoded quirk value with BIT() macro [ Upstream commit 6666ea93d2c422ebeb8039d11e642552da682070 ] This patch replaces the hardcoded quirk value in the macro with BIT(). Signed-off-by: Hardik Gajjar Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/20231205181829.127353-1-hgajjar@de.adit-jv.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 4a5d0528cf19dbf060313dffbe047bc11c90c24c Author: Daniel Stodden Date: Tue Nov 21 20:23:16 2023 -0800 PCI: switchtec: Fix stdev_release() crash after surprise hot remove [ Upstream commit df25461119d987b8c81d232cfe4411e91dcabe66 ] A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com Link: https://lore.kernel.org/r/20231122042316.91208-2-dns@arista.com Signed-off-by: Daniel Stodden Signed-off-by: Bjorn Helgaas Reviewed-by: Logan Gunthorpe Reviewed-by: Dmitry Safonov Signed-off-by: Sasha Levin commit 385e49a40fff5f9120850e9243ab6d6ad13013f4 Author: Guilherme G. Piccoli Date: Mon Nov 20 13:04:36 2023 -0300 PCI: Only override AMD USB controller if required [ Upstream commit e585a37e5061f6d5060517aed1ca4ccb2e56a34c ] By running a Van Gogh device (Steam Deck), the following message was noticed in the kernel log: pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci Effectively this means the quirk executed but changed nothing, since the class of this device was already the proper one (likely adjusted by newer firmware versions). Check and perform the override only if necessary. Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli Signed-off-by: Bjorn Helgaas Cc: Huang Rui Cc: Vicki Pfau Signed-off-by: Sasha Levin commit bb59b30a5ce28ba34ab851bda80b149dd1ce5273 Author: Peter Robinson Date: Wed Dec 20 15:56:39 2023 +0000 mfd: ti_am335x_tscadc: Fix TI SoC dependencies [ Upstream commit 284d16c456e5d4b143f375b8ccc4038ab3f4ee0f ] The ti_am335x_tscadc is specific to some TI SoCs, update the dependencies for those SoCs and compile testing. Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit e4fdf3b17686228d350541e2b8eec2e0d832663f Author: Oleksandr Tyshchenko Date: Sun Jan 7 12:34:26 2024 +0200 xen/gntdev: Fix the abuse of underlying struct page in DMA-buf import [ Upstream commit 2d2db7d40254d5fb53b11ebd703cd1ed0c5de7a1 ] DO NOT access the underlying struct page of an sg table exported by DMA-buf in dmabuf_imp_to_refs(), this is not allowed. Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details. Fortunately, here (for special Xen device) we can avoid using pages and calculate gfns directly from dma addresses provided by the sg table. Suggested-by: Daniel Vetter Signed-off-by: Oleksandr Tyshchenko Acked-by: Christian König Reviewed-by: Stefano Stabellini Acked-by: Daniel Vetter Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit 89bdf3a9f98cb7ba4af3bb0c5c4af82a23c6cc04 Author: Harshit Shah Date: Sat Dec 30 14:41:23 2023 +0530 i3c: master: cdns: Update maximum prescaler value for i2c clock [ Upstream commit 374c13f9080a1b9835a5ed3e7bea93cf8e2dc262 ] As per the Cadence IP document fixed the I2C clock divider value limit from 16 bits instead of 10 bits. Without this change setting up the I2C clock to low frequencies will not work as the prescaler value might be greater than 10 bit number. I3C clock divider value is 10 bits only. Updating the macro names for both. Signed-off-by: Harshit Shah Link: https://lore.kernel.org/r/1703927483-28682-1-git-send-email-harshitshah.opendev@gmail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin commit b345f330aeed0edbaf3ace089886bcbed030528f Author: Nathan Chancellor Date: Wed Dec 6 09:49:46 2023 -0700 um: net: Fix return type of uml_net_start_xmit() [ Upstream commit 7d748f60a4b82b50bf25fad1bd42d33f049f76aa ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A warning in clang aims to catch these at compile time, which reveals: arch/um/drivers/net_kern.c:353:21: warning: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Wincompatible-function-pointer-types-strict] 353 | .ndo_start_xmit = uml_net_start_xmit, | ^~~~~~~~~~~~~~~~~~ 1 warning generated. ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of uml_net_start_xmit() to match the prototype's to resolve the warning. While UML does not currently implement support for kCFI, it could in the future, which means this warning becomes a fatal CFI failure at run time. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310031340.v1vPh207-lkp@intel.com/ Acked-by: Anton Ivanov Signed-off-by: Nathan Chancellor Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit ef21984653fc5ae3fad9bab6962f7bc6f0936dd9 Author: Benjamin Berg Date: Fri Nov 10 12:03:41 2023 +0100 um: Don't use vfprintf() for os_info() [ Upstream commit 236f9fe39b02c15fa5530b53e9cca48354394389 ] The threads allocated inside the kernel have only a single page of stack. Unfortunately, the vfprintf function in standard glibc may use too much stack-space, overflowing it. To make os_info safe to be used by helper threads, use the kernel vscnprintf function into a smallish buffer and write out the information to stderr. Signed-off-by: Benjamin Berg Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit e4cc55538841097eb02bd28150949d20e15c06ca Author: Anton Ivanov Date: Thu Sep 21 15:34:44 2023 +0100 um: Fix naming clash between UML and scheduler [ Upstream commit 541d4e4d435c8b9bfd29f70a1da4a2db97794e0a ] __cant_sleep was already used and exported by the scheduler. The name had to be changed to a UML specific one. Signed-off-by: Anton Ivanov Reviewed-by: Peter Lafreniere Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin commit d47f5d41d8c022db641947c765f8aa1f115dbb4c Author: Heiner Kallweit Date: Sat Dec 16 21:05:33 2023 +0100 leds: trigger: panic: Don't register panic notifier if creating the trigger failed [ Upstream commit afacb21834bb02785ddb0c3ec197208803b74faa ] It doesn't make sense to register the panic notifier if creating the panic trigger failed. Signed-off-by: Heiner Kallweit Link: https://lore.kernel.org/r/8a61e229-5388-46c7-919a-4d18cc7362b2@gmail.com Signed-off-by: Lee Jones Signed-off-by: Sasha Levin commit 8342ac4a552aa6f3408adca40af8398808329a20 Author: Srinivasan Shanmugam Date: Wed Dec 27 12:54:44 2023 +0530 drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' [ Upstream commit bf2ad4fb8adca89374b54b225d494e0b1956dbea ] Return value of container_of(...) can't be null, so null check is not required for 'fence'. Hence drop its NULL check. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_fence.c:93 to_amdgpu_amdkfd_fence() warn: can 'fence' even be NULL? Cc: Felix Kuehling Cc: Christian König Cc: Alex Deucher Signed-off-by: Srinivasan Shanmugam Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 48bb06f8e380a7ee8c5242b0d59768b9bf9c8cea Author: Felix Kuehling Date: Mon Dec 18 16:17:23 2023 -0500 drm/amdgpu: Let KFD sync with VM fences [ Upstream commit ec9ba4821fa52b5efdbc4cdf0a77497990655231 ] Change the rules for amdgpu_sync_resv to let KFD synchronize with VM fences on page table reservations. This fixes intermittent memory corruption after evictions when using amdgpu_vm_handle_moved to update page tables for VM mappings managed through render nodes. Signed-off-by: Felix Kuehling Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit e90c8f9785eac5511b94a285aefe2a3857761e1e Author: Werner Fischer Date: Wed Dec 13 10:45:25 2023 +0100 watchdog: it87_wdt: Keep WDTCTRL bit 3 unmodified for IT8784/IT8786 [ Upstream commit d12971849d71781c1e4ffd1117d4878ce233d319 ] WDTCTRL bit 3 sets the mode choice for the clock input of IT8784/IT8786. Some motherboards require this bit to be set to 1 (= PCICLK mode), otherwise the watchdog functionality gets broken. The BIOS of those motherboards sets WDTCTRL bit 3 already to 1. Instead of setting all bits of WDTCTRL to 0 by writing 0x00 to it, keep bit 3 of it unchanged for IT8784/IT8786 chips. In this way, bit 3 keeps the status as set by the BIOS of the motherboard. Watchdog tests have been successful with this patch with the following systems: IT8784: Thomas-Krenn LES plus v2 (YANLING YL-KBRL2 V2) IT8786: Thomas-Krenn LES plus v3 (YANLING YL-CLU L2) IT8786: Thomas-Krenn LES network 6L v2 (YANLING YL-CLU6L) Link: https://lore.kernel.org/all/140b264d-341f-465b-8715-dacfe84b3f71@roeck-us.net/ Signed-off-by: Werner Fischer Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231213094525.11849-4-devlists@wefi.net Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin commit 6f59516a36b96a59219af3a12ac4c1ffa303be63 Author: Kuan-Wei Chiu Date: Mon Dec 11 01:52:32 2023 +0800 clk: mmp: pxa168: Fix memory leak in pxa168_clk_init() [ Upstream commit 2fbabea626b6467eb4e6c4cb7a16523da12e43b4 ] In cases where mapping of mpmu/apmu/apbc registers fails, the code path does not handle the failure gracefully, potentially leading to a memory leak. This fix ensures proper cleanup by freeing the allocated memory for 'pxa_unit' before returning. Signed-off-by: Kuan-Wei Chiu Link: https://lore.kernel.org/r/20231210175232.3414584-1-visitorckw@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 2cb6059468f8f4e096c207abd0c1578784f71a79 Author: Kuan-Wei Chiu Date: Mon Dec 11 00:50:40 2023 +0800 clk: hi3620: Fix memory leak in hi3620_mmc_clk_init() [ Upstream commit bfbea9e5667cfa9552c3d88f023386f017f6c308 ] In cases where kcalloc() fails for the 'clk_data->clks' allocation, the code path does not handle the failure gracefully, potentially leading to a memory leak. This fix ensures proper cleanup by freeing the allocated memory for 'clk_data' before returning. Signed-off-by: Kuan-Wei Chiu Link: https://lore.kernel.org/r/20231210165040.3407545-1-visitorckw@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin commit 5fd28ab1c89d054147bab5f3c72a17faa3fa9f4b Author: Rob Clark Date: Mon Dec 11 10:19:55 2023 -0800 drm/msm/dpu: Ratelimit framedone timeout msgs [ Upstream commit 2b72e50c62de60ad2d6bcd86aa38d4ccbdd633f2 ] When we start getting these, we get a *lot*. So ratelimit it to not flood dmesg. Signed-off-by: Rob Clark Reviewed-by: Abhinav Kumar Reviewed-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/571584/ Link: https://lore.kernel.org/r/20231211182000.218088-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin commit 179fe24bd6759e79a9fbdc4052c3cd1e3d2d9af1 Author: Su Hui Date: Fri Oct 20 17:17:23 2023 +0800 media: ddbridge: fix an error code problem in ddb_probe [ Upstream commit 09b4195021be69af1e1936cca995712a6d0f2562 ] Error code is assigned to 'stat', return 'stat' rather than '-1'. Signed-off-by: Su Hui Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit ac2630fd3c90ffec34a0bfc4d413668538b0e8f2 Author: Daniel Vacek Date: Tue Dec 12 09:07:45 2023 +0100 IB/ipoib: Fix mcast list locking [ Upstream commit 4f973e211b3b1c6d36f7c6a19239d258856749f9 ] Releasing the `priv->lock` while iterating the `priv->multicast_list` in `ipoib_mcast_join_task()` opens a window for `ipoib_mcast_dev_flush()` to remove the items while in the middle of iteration. If the mcast is removed while the lock was dropped, the for loop spins forever resulting in a hard lockup (as was reported on RHEL 4.18.0-372.75.1.el8_6 kernel): Task A (kworker/u72:2 below) | Task B (kworker/u72:0 below) -----------------------------------+----------------------------------- ipoib_mcast_join_task(work) | ipoib_ib_dev_flush_light(work) spin_lock_irq(&priv->lock) | __ipoib_ib_dev_flush(priv, ...) list_for_each_entry(mcast, | ipoib_mcast_dev_flush(dev = priv->dev) &priv->multicast_list, list) | ipoib_mcast_join(dev, mcast) | spin_unlock_irq(&priv->lock) | | spin_lock_irqsave(&priv->lock, flags) | list_for_each_entry_safe(mcast, tmcast, | &priv->multicast_list, list) | list_del(&mcast->list); | list_add_tail(&mcast->list, &remove_list) | spin_unlock_irqrestore(&priv->lock, flags) spin_lock_irq(&priv->lock) | | ipoib_mcast_remove_list(&remove_list) (Here, `mcast` is no longer on the | list_for_each_entry_safe(mcast, tmcast, `priv->multicast_list` and we keep | remove_list, list) spinning on the `remove_list` of | >>> wait_for_completion(&mcast->done) the other thread which is blocked | and the list is still valid on | it's stack.) Fix this by keeping the lock held and changing to GFP_ATOMIC to prevent eventual sleeps. Unfortunately we could not reproduce the lockup and confirm this fix but based on the code review I think this fix should address such lockups. crash> bc 31 PID: 747 TASK: ff1c6a1a007e8000 CPU: 31 COMMAND: "kworker/u72:2" -- [exception RIP: ipoib_mcast_join_task+0x1b1] RIP: ffffffffc0944ac1 RSP: ff646f199a8c7e00 RFLAGS: 00000002 RAX: 0000000000000000 RBX: ff1c6a1a04dc82f8 RCX: 0000000000000000 work (&priv->mcast_task{,.work}) RDX: ff1c6a192d60ac68 RSI: 0000000000000286 RDI: ff1c6a1a04dc8000 &mcast->list RBP: ff646f199a8c7e90 R8: ff1c699980019420 R9: ff1c6a1920c9a000 R10: ff646f199a8c7e00 R11: ff1c6a191a7d9800 R12: ff1c6a192d60ac00 mcast R13: ff1c6a1d82200000 R14: ff1c6a1a04dc8000 R15: ff1c6a1a04dc82d8 dev priv (&priv->lock) &priv->multicast_list (aka head) ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Sasha Levin commit 9503ce5f8795d7fa33b838c5317f78a4ef525310 Author: Douglas Anderson Date: Thu Sep 21 12:26:52 2023 -0700 drm/exynos: Call drm_atomic_helper_shutdown() at shutdown/unbind time [ Upstream commit 16ac5b21b31b439f03cdf44c153c5f5af94fb3eb ] Based on grepping through the source code this driver appears to be missing a call to drm_atomic_helper_shutdown() at system shutdown time and at driver unbind time. Among other things, this means that if a panel is in use that it won't be cleanly powered off at system shutdown time. The fact that we should call drm_atomic_helper_shutdown() in the case of OS shutdown/restart and at driver remove (or unbind) time comes straight out of the kernel doc "driver instance overview" in drm_drv.c. A few notes about this fix: - When adding drm_atomic_helper_shutdown() to the unbind path, I added it after drm_kms_helper_poll_fini() since that's when other drivers seemed to have it. - Technically with a previous patch, ("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a noop"), we don't actually need to check to see if our "drm" pointer is NULL before calling drm_atomic_helper_shutdown(). We'll leave the "if" test in, though, so that this patch can land without any dependencies. It could potentially be removed later. - This patch also makes sure to set the drvdata to NULL in the case of bind errors to make sure that shutdown can't access freed data. Suggested-by: Maxime Ripard Reviewed-by: Maxime Ripard Signed-off-by: Douglas Anderson Tested-by: Marek Szyprowski Reviewed-by: Marek Szyprowski Signed-off-by: Inki Dae Signed-off-by: Sasha Levin commit 1eeca000f26871522c52fc9b76eb375453fc08d2 Author: Pierre-Louis Bossart Date: Mon Dec 4 15:27:08 2023 -0600 ALSA: hda: intel-dspcfg: add filters for ARL-S and ARL [ Upstream commit 7a9d6bbe8a663c817080be55d9fecf19a4a8fd8f ] Same usual filters, SOF is required for DMIC and/or SoundWire support. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Kai Vehmanen Acked-by: Mark Brown Link: https://lore.kernel.org/r/20231204212710.185976-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 3841b8a64e6018a2266ffe9c2b295db41610b523 Author: Pierre-Louis Bossart Date: Mon Dec 4 15:27:07 2023 -0600 ALSA: hda: Intel: add HDA_ARL PCI ID support [ Upstream commit a31014ebad617868c246d3985ff80d891f03711e ] Yet another PCI ID. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Kai Vehmanen Acked-by: Mark Brown Link: https://lore.kernel.org/r/20231204212710.185976-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 56d717aa7bbea0383687e8e72e0e0d957f8895a2 Author: Pierre-Louis Bossart Date: Mon Dec 4 15:27:06 2023 -0600 PCI: add INTEL_HDA_ARL to pci_ids.h [ Upstream commit 5ec42bf04d72fd6d0a6855810cc779e0ee31dfd7 ] The PCI ID insertion follows the increasing order in the table, but this hardware follows MTL (MeteorLake). Signed-off-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Kai Vehmanen Acked-by: Mark Brown Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit b68e373dc031a521dded263d44ec4385f3e86696 Author: Michael Tretter Date: Fri Oct 13 13:00:22 2023 +0200 media: rockchip: rga: fix swizzling for RGB formats [ Upstream commit 9e7dc39260edac180c206bb6149595a40eabae3e ] When using 32 bit RGB formats, the RGA on the rk3568 produces wrong colors as the wrong color channels are read or written. The reason is that the format description for the channel swizzeling is wrong and the wrong bits are configured. For example, when converting ARGB32 to NV12, the alpha channel is used as blue channel.. This doesn't happen if the color format is the same on both sides. Fix the color_swap settings of the formats to correctly handle 32 bit RGB formats. For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus, it is removed from the list of supported formats. Signed-off-by: Michael Tretter Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 32c5e3f8085fce155c1a96eece0ba8dd14446d32 Author: Ghanshyam Agrawal Date: Sat Nov 25 14:32:36 2023 +0530 media: stk1160: Fixed high volume of stk1160_dbg messages [ Upstream commit b3695e86d25aafbe175dd51f6aaf6f68d341d590 ] The function stk1160_dbg gets called too many times, which causes the output to get flooded with messages. Since stk1160_dbg uses printk, it is now replaced with printk_ratelimited. Suggested-by: Phillip Potter Signed-off-by: Ghanshyam Agrawal Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin commit 425a441c5c32cf8ad26f28006267ff2d972927c9 Author: Tomi Valkeinen Date: Thu Sep 21 13:50:32 2023 +0300 drm/mipi-dsi: Fix detach call without attach [ Upstream commit 90d50b8d85834e73536fdccd5aa913b30494fef0 ] It's been reported that DSI host driver's detach can be called without the attach ever happening: https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/ After reading the code, I think this is what happens: We have a DSI host defined in the device tree and a DSI peripheral under that host (i.e. an i2c device using the DSI as data bus doesn't exhibit this behavior). The host driver calls mipi_dsi_host_register(), which causes (via a few functions) mipi_dsi_device_add() to be called for the DSI peripheral. So now we have a DSI device under the host, but attach hasn't been called. Normally the probing of the devices continues, and eventually the DSI peripheral's driver will call mipi_dsi_attach(), attaching the peripheral. However, if the host driver's probe encounters an error after calling mipi_dsi_host_register(), and before the peripheral has called mipi_dsi_attach(), the host driver will do cleanups and return an error from its probe function. The cleanups include calling mipi_dsi_host_unregister(). mipi_dsi_host_unregister() will call two functions for all its DSI peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister(). The latter makes sense, as the device exists, but the former may be wrong as attach has not necessarily been done. To fix this, track the attached state of the peripheral, and only detach from mipi_dsi_host_unregister() if the peripheral was attached. Note that I have only tested this with a board with an i2c DSI peripheral, not with a "pure" DSI peripheral. However, slightly related, the unregister machinery still seems broken. E.g. if the DSI host driver is unbound, it'll detach and unregister the DSI peripherals. After that, when the DSI peripheral driver unbound it'll call detach either directly or using the devm variant, leading to a crash. And probably the driver will crash if it happens, for some reason, to try to send a message via the DSI bus. But that's another topic. Tested-by: H. Nikolaus Schaller Acked-by: Maxime Ripard Reviewed-by: Sebastian Reichel Tested-by: Tony Lindgren Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com Signed-off-by: Sasha Levin commit 0ec29a0f03666b657205bb7f0e843175a1012a15 Author: Tomi Valkeinen Date: Fri Nov 3 15:14:04 2023 +0200 drm/framebuffer: Fix use of uninitialized variable [ Upstream commit f9af8f0c1dc567a5a6a6318ff324c45d80d4a60f ] smatch reports: drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'. 'ret' is possibly not set when there are no errors, causing the error above. I can't say if that ever happens in real-life, but in any case I think it is good to initialize 'ret' to 0. Reviewed-by: Laurent Pinchart Acked-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-2-c22b2444f5f5@ideasonboard.com Signed-off-by: Sasha Levin commit d7b81afa11bac58ab11931c656f551685cc9abfe Author: Tomi Valkeinen Date: Fri Nov 3 15:14:03 2023 +0200 drm/drm_file: fix use of uninitialized variable [ Upstream commit 1d3062fad9c7313fff9970a88e0538a24480ffb8 ] smatch reports: drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'. 'supported_status' is only set in one code path. I'm not familiar with the code to say if that path will always be ran in real life, but whether that is the case or not, I think it is good to initialize 'supported_status' to 0 to silence the warning (and possibly fix a bug). Reviewed-by: Laurent Pinchart Acked-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-1-c22b2444f5f5@ideasonboard.com Signed-off-by: Sasha Levin commit 9a572fc1f6af1e28838feaf202b5b0e93cfe3968 Author: Jaegeuk Kim Date: Sat Dec 2 00:08:57 2023 -0800 f2fs: fix write pointers on zoned device after roll forward [ Upstream commit 9dad4d964291295ef48243d4e03972b85138bc9f ] 1. do roll forward recovery 2. update current segments pointers 3. fix the entire zones' write pointers 4. do checkpoint Reviewed-by: Daeho Jeong Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit 7fb8c132738bfdda292823122b3e04bad081c46c Author: Meenakshikumar Somasundaram Date: Thu Nov 9 00:04:36 2023 -0500 drm/amd/display: Fix tiled display misalignment [ Upstream commit c4b8394e76adba4f50a3c2696c75b214a291e24a ] [Why] When otg workaround is applied during clock update, otgs of tiled display went out of sync. [How] To call dc_trigger_sync() after clock update to sync otgs again. Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Meenakshikumar Somasundaram Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin commit 3a1da8abd772b39414149a90d262cbbd44b73a37 Author: Jack Wang Date: Tue Nov 21 14:03:15 2023 +0100 RDMA/IPoIB: Fix error code return in ipoib_mcast_join [ Upstream commit 753fff78f430704548f45eda52d6d55371a52c0f ] Return the error code in case of ib_sa_join_multicast fail. Signed-off-by: Jack Wang Link: https://lore.kernel.org/r/20231121130316.126364-2-jinpu.wang@ionos.com Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin commit 13d20b2c20bee0a1f4aa0460b8c102eff7ad0c7d Author: Al Viro Date: Wed Nov 1 01:08:54 2023 -0400 fast_dput(): handle underflows gracefully [ Upstream commit 504e08cebe1d4e1efe25f915234f646e74a364a8 ] If refcount is less than 1, we should just warn, unlock dentry and return true, so that the caller doesn't try to do anything else. Taking care of that leaves the rest of "lockref_put_return() has failed" case equivalent to "decrement refcount and rejoin the normal slow path after the point where we grab ->d_lock". NOTE: lockref_put_return() is strictly a fastpath thing - unlike the rest of lockref primitives, it does not contain a fallback. Caller (and it looks like fast_dput() is the only legitimate one in the entire kernel) has to do that itself. Reasons for lockref_put_return() failures: * ->d_lock held by somebody * refcount <= 0 * ... or an architecture not supporting lockref use of cmpxchg - sparc, anything non-SMP, config with spinlock debugging... We could add a fallback, but it would be a clumsy API - we'd have to distinguish between: (1) refcount > 1 - decremented, lock not held on return (2) refcount < 1 - left alone, probably no sense to hold the lock (3) refcount is 1, no cmphxcg - decremented, lock held on return (4) refcount is 1, cmphxcg supported - decremented, lock *NOT* held on return. We want to return with no lock held in case (4); that's the whole point of that thing. We very much do not want to have the fallback in case (3) return without a lock, since the caller might have to retake it in that case. So it wouldn't be more convenient than doing the fallback in the caller and it would be very easy to screw up, especially since the test coverage would suck - no way to test (3) and (4) on the same kernel build. Reviewed-by: Christian Brauner Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit 706fb30da0a561efb9a85a0179f08603db13317e Author: Cristian Ciocaltea Date: Tue Nov 21 14:07:51 2023 +0200 ASoC: doc: Fix undefined SND_SOC_DAPM_NOPM argument [ Upstream commit 67c7666fe808c3a7af3cc6f9d0a3dd3acfd26115 ] The virtual widget example makes use of an undefined SND_SOC_DAPM_NOPM argument passed to SND_SOC_DAPM_MIXER(). Replace with the correct SND_SOC_NOPM definition. Signed-off-by: Cristian Ciocaltea Link: https://lore.kernel.org/r/20231121120751.77355-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 354785abdf5e29ea87d32ca1316c5fc2041d38ec Author: Takashi Iwai Date: Tue Nov 21 16:41:25 2023 +0100 ALSA: hda: Refer to correct stream index at loops [ Upstream commit 26257869672fd4a06a60c2da841e15fb2cb47bbe ] In a couple of loops over the all streams, we check the bitmap against the loop counter. A more correct reference would be, however, the index of each stream, instead. This patch corrects the check of bitmaps to the stream index. Note that this change doesn't fix anything for now; all existing drivers set up the stream indices properly, hence the loop count is always equal with the stream index. That said, this change is only for consistency. Link: https://lore.kernel.org/r/20231121154125.4888-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin commit 80c69f576ff39d6ae8a6e2107da3dc03b533759c Author: Chao Yu Date: Thu Nov 16 14:25:56 2023 +0800 f2fs: fix to check return value of f2fs_reserve_new_block() [ Upstream commit 956fa1ddc132e028f3b7d4cf17e6bfc8cb36c7fd ] Let's check return value of f2fs_reserve_new_block() in do_recover_data() rather than letting it fails silently. Also refactoring check condition on return value of f2fs_reserve_new_block() as below: - trigger f2fs_bug_on() only for ENOSPC case; - use do-while statement to avoid redundant codes; Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin commit e474e7a7d6f9b60b0e2b836f999d63a962124cc8 Author: Andrii Staikov Date: Wed Nov 29 15:24:12 2023 +0100 i40e: Fix VF disable behavior to block all traffic [ Upstream commit 31deb12e85c35ddd2c037f0107d05d8674cab2c0 ] Currently, if a VF is disabled using the 'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still able to receive traffic. Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable' to completely shutdown the VF's queues making it entirely disabled and not able to receive or send any traffic. Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable' command to make a VF do reinitialization bringing the queues back up. Co-developed-by: Aleksandr Loktionov Signed-off-by: Aleksandr Loktionov Reviewed-by: Jan Sokolowski Reviewed-by: Wojciech Drewek Reviewed-by: Przemek Kitszel Signed-off-by: Andrii Staikov Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit ed6de41473c8718d9236512e9424e4943b80acf9 Author: Frédéric Danis Date: Tue Dec 19 09:10:22 2023 +0100 Bluetooth: L2CAP: Fix possible multiple reject send [ Upstream commit 96a3398b467ab8aada3df2f3a79f4b7835d068b8 ] In case of an incomplete command or a command with a null identifier 2 reject packets will be sent, one with the identifier and one with 0. Consuming the data of the command will prevent it. This allows to send a reject packet for each corrupted command in a multi-command packet. Signed-off-by: Frédéric Danis Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit e1bcd9a42e5b7c18afd9a3b3cf88eaee8f9d71c4 Author: Zijun Hu Date: Mon Nov 6 14:02:46 2023 +0800 Bluetooth: qca: Set both WIDEBAND_SPEECH and LE_STATES quirks for QCA2066 [ Upstream commit 5d192b697c7417254cdd9edc3d5e9e0364eb9045 ] Set both WIDEBAND_SPEECH_SUPPORTED and VALID_LE_STATES quirks for QCA2066. Signed-off-by: Zijun Hu Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 27575c2f1f46e22a2956ae09c37ec85db382c707 Author: Benjamin Berg Date: Wed Dec 20 13:41:41 2023 +0200 wifi: cfg80211: free beacon_ies when overridden from hidden BSS [ Upstream commit 32af9a9e1069e55bc02741fb00ac9d0ca1a2eaef ] This is a more of a cosmetic fix. The branch will only be taken if proberesp_ies is set, which implies that beacon_ies is not set unless we are connected to an AP that just did a channel switch. And, in that case we should have found the BSS in the internal storage to begin with. Signed-off-by: Benjamin Berg Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20231220133549.b898e22dadff.Id8c4c10aedd176ef2e18a4cad747b299f150f9df@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 40bcbf7d906943ac5f219120ad50efc530e9c696 Author: Su Hui Date: Tue Dec 19 14:57:39 2023 +0800 wifi: rtlwifi: rtl8723{be,ae}: using calculate_bit_shift() [ Upstream commit 5c16618bc06a41ad68fd8499a21d35ef57ca06c2 ] Using calculate_bit_shift() to replace rtl8723_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-12-suhui@nfschina.com Signed-off-by: Sasha Levin commit 1632481a990d95b544738797046867edad676b74 Author: Zenm Chen Date: Sun Dec 17 20:30:17 2023 +0800 wifi: rtl8xxxu: Add additional USB IDs for RTL8192EU devices [ Upstream commit 4e87ca403e2008b9e182239e1abbf6876a55eb33 ] Add additional USB IDs found in the vendor driver from https://github.com/Mange/rtl8192eu-linux-driver to support more RTL8192EU devices. Signed-off-by: Zenm Chen Reviewed-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://msgid.link/20231217123017.1982-1-zenmchen@gmail.com Signed-off-by: Sasha Levin commit 2131606a5fd7246453911d20c69821db21362e5a Author: Mao Jinlong Date: Sat Dec 9 23:26:30 2023 -0800 arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property [ Upstream commit ae5ee3562a2519214b12228545e88a203dd68bbd ] out-ports is a required property for coresight ETM. Add out-ports for ETM nodes to fix the warning. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mao Jinlong Link: https://lore.kernel.org/r/20231210072633.4243-4-quic_jinlmao@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 4668f3e6ac23487482ab2645a246f52a784a6baa Author: Mao Jinlong Date: Sat Dec 9 23:26:29 2023 -0800 arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property [ Upstream commit 9a6fc510a6a3ec150cb7450aec1e5f257e6fc77b ] Add the inport of funnel@3023000 to fix 'in-ports' is a required property warning. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Mao Jinlong Link: https://lore.kernel.org/r/20231210072633.4243-3-quic_jinlmao@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 82f6e7e68e957c67d365f85615dd1eb762e6342e Author: Alex Lyakas Date: Wed Dec 13 14:24:31 2023 +0200 md: Whenassemble the array, consult the superblock of the freshest device [ Upstream commit dc1cc22ed58f11d58d8553c5ec5f11cbfc3e3039 ] Upon assembling the array, both kernel and mdadm allow the devices to have event counter difference of 1, and still consider them as up-to-date. However, a device whose event count is behind by 1, may in fact not be up-to-date, and array resync with such a device may cause data corruption. To avoid this, consult the superblock of the freshest device about the status of a device, whose event counter is behind by 1. Signed-off-by: Alex Lyakas Signed-off-by: Song Liu Link: https://lore.kernel.org/r/1702470271-16073-1-git-send-email-alex.lyakas@zadara.com Signed-off-by: Sasha Levin commit 1746cd95a5533c4ea0b686726d0139aecc602c8d Author: Christoph Hellwig Date: Mon Dec 4 18:34:18 2023 +0100 block: prevent an integer overflow in bvec_try_merge_hw_page [ Upstream commit 3f034c374ad55773c12dd8f3c1607328e17c0072 ] Reordered a check to avoid a possible overflow when adding len to bv_len. Signed-off-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20231204173419.782378-2-hch@lst.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 1335310a6a87918915c0fd0d0f19ba075d70a8c6 Author: Tobias Waldekranz Date: Thu Dec 14 14:50:24 2023 +0100 net: dsa: mv88e6xxx: Fix mv88e6352_serdes_get_stats error path [ Upstream commit fc82a08ae795ee6b73fb6b50785f7be248bec7b5 ] mv88e6xxx_get_stats, which collects stats from various sources, expects all callees to return the number of stats read. If an error occurs, 0 should be returned. Prevent future mishaps of this kind by updating the return type to reflect this contract. Reviewed-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Tobias Waldekranz Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9c51d26ff95fa141379366538f06a48f11613688 Author: Fabio Estevam Date: Thu Dec 7 07:26:31 2023 -0300 ARM: dts: imx23/28: Fix the DMA controller node name [ Upstream commit 858d83ca4b50bbc8693d95cc94310e6d791fb2e6 ] Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'. Change it to fix the following dt-schema warning. imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 6c22388d960f575a1c200d3834623811307a82f2 Author: Fabio Estevam Date: Thu Dec 7 07:12:12 2023 -0300 ARM: dts: imx23-sansa: Use preferred i2c-gpios properties [ Upstream commit e3aa1a82fb20ee97597022f6528823a8ab82bde6 ] The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit fb9bdf84b61292d3ec9173c140dcc88cf6205cd8 Author: Fabio Estevam Date: Wed Dec 6 17:19:05 2023 -0300 ARM: dts: imx27-apf27dev: Fix LED name [ Upstream commit dc35e253d032b959d92e12f081db5b00db26ae64 ] Per leds-gpio.yaml, the led names should start with 'led'. Change it to fix the following dt-schema warning: imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 1dd3a37909d7df2beb947a26bcb1c7bace166917 Author: Fabio Estevam Date: Wed Dec 6 17:14:05 2023 -0300 ARM: dts: imx25/27: Pass timing0 [ Upstream commit 11ab7ad6f795ae23c398a4a5c56505d3dab27c4c ] Per display-timings.yaml, the 'timing' pattern should be used to describe the display timings. Change it accordingly to fix the following dt-schema warning: imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 3c2bce897698f557d4c7a78ff389f98d69217ded Author: Fabio Estevam Date: Wed Dec 6 17:00:33 2023 -0300 ARM: dts: imx25: Fix the iim compatible string [ Upstream commit f0b929f58719fc57a4926ab4fc972f185453d6a5 ] Per imx-iim.yaml, the compatible string should only contain a single entry. Use it as "fsl,imx25-iim" to fix the following dt-schema warning: imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 95bc866c11974d3e4a9d922275ea8127ff809cf7 Author: Kees Cook Date: Tue Dec 12 13:47:42 2023 -0800 block/rnbd-srv: Check for unlikely string overflow [ Upstream commit 9e4bf6a08d1e127bcc4bd72557f2dfafc6bc7f41 ] Since "dev_search_path" can technically be as large as PATH_MAX, there was a risk of truncation when copying it and a second string into "full_path" since it was also PATH_MAX sized. The W=1 builds were reporting this warning: drivers/block/rnbd/rnbd-srv.c: In function 'process_msg_open.isra': drivers/block/rnbd/rnbd-srv.c:616:51: warning: '%s' directive output may be truncated writing up to 254 bytes into a region of size between 0 and 4095 [-Wformat-truncation=] 616 | snprintf(full_path, PATH_MAX, "%s/%s", | ^~ In function 'rnbd_srv_get_full_path', inlined from 'process_msg_open.isra' at drivers/block/rnbd/rnbd-srv.c:721:14: drivers/block/rnbd/rnbd-srv.c:616:17: note: 'snprintf' output between 2 and 4351 bytes into a destination of size 4096 616 | snprintf(full_path, PATH_MAX, "%s/%s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 617 | dev_search_path, dev_name); | ~~~~~~~~~~~~~~~~~~~~~~~~~~ To fix this, unconditionally check for truncation (as was already done for the case where "%SESSNAME%" was present). Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312100355.lHoJPgKy-lkp@intel.com/ Cc: Md. Haris Iqbal Cc: Jack Wang Cc: Jens Axboe Cc: Signed-off-by: Kees Cook Acked-by: Guoqing Jiang Acked-by: Jack Wang Link: https://lore.kernel.org/r/20231212214738.work.169-kees@kernel.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 03ca1d3d8f4df790dd40ab4059e06f578fc289ed Author: Shannon Nelson Date: Mon Dec 11 10:57:57 2023 -0800 ionic: pass opcode to devcmd_wait [ Upstream commit 24f110240c03c6b5368f1203bac72883d511e606 ] Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Signed-off-by: Shannon Nelson Reviewed-by: Brett Creeley Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ba108f3db98cf41867b90022d419a3430962f72b Author: Fabio Estevam Date: Wed Dec 6 09:39:21 2023 -0300 ARM: dts: imx1: Fix sram node [ Upstream commit c248e535973088ba7071ff6f26ab7951143450af ] Per sram.yaml, address-cells, size-cells and ranges are mandatory. The node name should be sram. Change the node name and pass the required properties to fix the following dt-schema warnings: imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?' from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 2f22ce556e38010ae5f94564b74ba6194f239b73 Author: Fabio Estevam Date: Wed Dec 6 09:39:20 2023 -0300 ARM: dts: imx27: Fix sram node [ Upstream commit 2fb7b2a2f06bb3f8321cf26c33e4e820c5b238b6 ] Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following dt-schema warnings: Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit e6c0ea054cf99305399669672011c99a77a4911b Author: Fabio Estevam Date: Wed Dec 6 09:36:05 2023 -0300 ARM: dts: imx: Use flash@0,0 pattern [ Upstream commit 1e1d7cc478fb16816de09740e3c323c0c188d58f ] Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern. Change it to 'flash@0,0' to fix the following dt-schema warning: imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit bfbaf1551bee4bb6f9447da75acdd6b2245deb08 Author: Fabio Estevam Date: Wed Dec 6 08:58:26 2023 -0300 ARM: dts: imx25/27-eukrea: Fix RTC node name [ Upstream commit 68c711b882c262e36895547cddea2c2d56ce611d ] Node names should be generic. Use 'rtc' as node name to fix the following dt-schema warning: imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 24bb6b2647927fb879fe5fe7b2d120fe114ef122 Author: Johan Jonker Date: Mon Dec 4 18:40:27 2023 +0100 ARM: dts: rockchip: fix rk3036 hdmi ports node [ Upstream commit 27ded76ef0fcfcf939914532aae575cf23c221b4 ] Fix hdmi ports node so that it matches the rockchip,inno-hdmi.yaml binding. Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/9a2afac1-ed5c-382d-02b0-b2f5f1af3abb@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin commit 11c1fc73bf1781bf4a24afb652fb3714145be879 Author: Hou Tao Date: Fri Dec 8 18:23:53 2023 +0800 bpf: Set uattr->batch.count as zero before batched update or deletion [ Upstream commit 06e5c999f10269a532304e89a6adb2fbfeb0593c ] generic_map_{delete,update}_batch() doesn't set uattr->batch.count as zero before it tries to allocate memory for key. If the memory allocation fails, the value of uattr->batch.count will be incorrect. Fix it by setting uattr->batch.count as zero beore batched update or deletion. Signed-off-by: Hou Tao Link: https://lore.kernel.org/r/20231208102355.2628918-6-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 2e7f8d05ec95cd8cf1c6d922179dcf851fc0fd91 Author: Hannes Reinecke Date: Wed Nov 29 17:58:31 2023 +0100 scsi: libfc: Fix up timeout error in fc_fcp_rec_error() [ Upstream commit 53122a49f49796beb2c4a1bb702303b66347e29f ] We should set the status to FC_TIMED_OUT when a timeout error is passed to fc_fcp_rec_error(). Signed-off-by: Hannes Reinecke Link: https://lore.kernel.org/r/20231129165832.224100-3-hare@kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit a72670f465a13c6b5acc36c972e8a4453a70884d Author: Hannes Reinecke Date: Wed Nov 29 17:58:30 2023 +0100 scsi: libfc: Don't schedule abort twice [ Upstream commit b57c4db5d23b9df0118a25e2441c9288edd73710 ] The current FC error recovery is sending up to three REC (recovery) frames in 10 second intervals, and as a final step sending an ABTS after 30 seconds for the command itself. Unfortunately sending an ABTS is also the action for the SCSI abort handler, and the default timeout for SCSI commands is also 30 seconds. This causes two ABTS to be scheduled, with the libfc one slightly earlier. The ABTS scheduled by SCSI EH then sees the command to be already aborted, and will always return with a 'GOOD' status irrespective on the actual result from the first ABTS. This causes the SCSI EH abort handler to always succeed, and SCSI EH never to be engaged. Fix this by not issuing an ABTS when a SCSI command is present for the exchange, but rather wait for the abort scheduled from SCSI EH. And warn if an abort is already scheduled to avoid similar errors in the future. Signed-off-by: Hannes Reinecke Link: https://lore.kernel.org/r/20231129165832.224100-2-hare@kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 80700978cb342f0a05d4857fb88d90a360834a26 Author: Hou Tao Date: Mon Dec 4 22:04:20 2023 +0800 bpf: Add map and need_defer parameters to .map_fd_put_ptr() [ Upstream commit 20c20bd11a0702ce4dc9300c3da58acf551d9725 ] map is the pointer of outer map, and need_defer needs some explanation. need_defer tells the implementation to defer the reference release of the passed element and ensure that the element is still alive before the bpf program, which may manipulate it, exits. The following three cases will invoke map_fd_put_ptr() and different need_defer values will be passed to these callers: 1) release the reference of the old element in the map during map update or map deletion. The release must be deferred, otherwise the bpf program may incur use-after-free problem, so need_defer needs to be true. 2) release the reference of the to-be-added element in the error path of map update. The to-be-added element is not visible to any bpf program, so it is OK to pass false for need_defer parameter. 3) release the references of all elements in the map during map release. Any bpf program which has access to the map must have been exited and released, so need_defer=false will be OK. These two parameters will be used by the following patches to fix the potential use-after-free problem for map-in-map. Signed-off-by: Hou Tao Link: https://lore.kernel.org/r/20231204140425.1480317-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 84770a996ad8d7f121ff2fb5a8d149aad52d64c1 Author: Minsuk Kang Date: Wed Nov 22 20:31:04 2023 +0200 wifi: ath9k: Fix potential array-index-out-of-bounds read in ath9k_htc_txstatus() [ Upstream commit 2adc886244dff60f948497b59affb6c6ebb3c348 ] Fix an array-index-out-of-bounds read in ath9k_htc_txstatus(). The bug occurs when txs->cnt, data from a URB provided by a USB device, is bigger than the size of the array txs->txstatus, which is HTC_MAX_TX_STATUS. WARN_ON() already checks it, but there is no bug handling code after the check. Make the function return if that is the case. Found by a modified version of syzkaller. UBSAN: array-index-out-of-bounds in htc_drv_txrx.c index 13 is out of range for type '__wmi_event_txstatus [12]' Call Trace: ath9k_htc_txstatus ath9k_wmi_event_tasklet tasklet_action_common __do_softirq irq_exit_rxu sysvec_apic_timer_interrupt Signed-off-by: Minsuk Kang Acked-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231113065756.1491991-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Sasha Levin commit c390b6a2c30ba4df1c4d8972e1ad8de51be02c14 Author: Alexander Stein Date: Thu Oct 12 10:15:55 2023 +0200 ARM: dts: imx7s: Fix nand-controller #size-cells [ Upstream commit 4aadb841ed49bada1415c48c44d21f5b69e01299 ] nand-controller.yaml bindings says #size-cells shall be set to 0. Fixes the dtbs_check warning: arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: nand-controller@33002000: #size-cells:0:0: 0 was expected from schema $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml# Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit d7cb295b53f94a28d937fbef092a85b2b35ed3a8 Author: Alexander Stein Date: Thu Oct 12 10:15:54 2023 +0200 ARM: dts: imx7s: Fix lcdif compatible [ Upstream commit 5f55da4cc37051cda600ea870ce8cf29f1297715 ] imx7d-lcdif is compatible to imx6sx-lcdif. MXSFB_V6 supports overlay by using LCDC_AS_CTRL register. This registers used by overlay plane: * LCDC_AS_CTRL * LCDC_AS_BUF * LCDC_AS_NEXT_BUF are listed in i.MX7D RM as well. Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 73ead7a37a4def7c2f2a42e9947780f2b9aaaace Author: Alexander Stein Date: Thu Oct 12 10:15:53 2023 +0200 ARM: dts: imx7d: Fix coresight funnel ports [ Upstream commit 0d4ac04fa7c3f6dc263dba6f575a2ec7a2d4eca8 ] imx7d uses two ports for 'in-ports', so the syntax port@ has to be used. imx7d has both port and port@1 nodes present, raising these error: funnel@30041000: in-ports: More than one condition true in oneOf schema funnel@30041000: Unevaluated properties are not allowed ('in-ports' was unexpected) Fix this by also using port@0 for imx7s as well. Signed-off-by: Alexander Stein Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin commit 86781b3a8eaefd435c8ff2bab38a0b419dd38d62 Author: ching Huang Date: Mon Oct 2 17:50:27 2023 +0800 scsi: arcmsr: Support new PCI device IDs 1883 and 1886 [ Upstream commit 41c8a1a1e90fa4721f856bf3cf71211fd16d6434 ] Add support for Areca RAID controllers with PCI device IDs 1883 and 1886. Signed-off-by: ching Huang Link: https://lore.kernel.org/r/7732e743eaad57681b1552eec9c6a86c76dbe459.camel@areca.com.tw Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit db516f6030bf8751bb8ada032413d0acf0a62c3c Author: Zhengchao Shao Date: Sat Nov 18 16:16:53 2023 +0800 bonding: return -ENOMEM instead of BUG in alb_upper_dev_walk [ Upstream commit d6b83f1e3707c4d60acfa58afd3515e17e5d5384 ] If failed to allocate "tags" or could not find the final upper device from start_dev's upper list in bond_verify_device_path(), only the loopback detection of the current upper device should be affected, and the system is no need to be panic. So return -ENOMEM in alb_upper_dev_walk to stop walking, print some warn information when failed to allocate memory for vlan tags in bond_verify_device_path. I also think that the following function calls netdev_walk_all_upper_dev_rcu ---->>>alb_upper_dev_walk ---------->>>bond_verify_device_path From this way, "end device" can eventually be obtained from "start device" in bond_verify_device_path, IS_ERR(tags) could be instead of IS_ERR_OR_NULL(tags) in alb_upper_dev_walk. Signed-off-by: Zhengchao Shao Acked-by: Jay Vosburgh Link: https://lore.kernel.org/r/20231118081653.1481260-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 4f87b8d9329704f4933060c78d9303dc7126b96d Author: Ido Schimmel Date: Wed Nov 15 13:17:16 2023 +0100 PCI: Add no PM reset quirk for NVIDIA Spectrum devices [ Upstream commit 3ed48c80b28d8dcd584d6ddaf00c75b7673e1a05 ] Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset (i.e., they advertise NoSoftRst-). However, this transition does not have any effect on the device: It continues to be operational and network ports remain up. Advertising this support makes it seem as if a PM reset is viable for these devices. Mark it as unavailable to skip it when testing reset methods. Before: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method pm bus After: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method bus Signed-off-by: Ido Schimmel Acked-by: Bjorn Helgaas Signed-off-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9bc7617a0d46f5c9e070cb93b08f8036c86aaaa1 Author: Justin Tee Date: Tue Oct 31 12:12:17 2023 -0700 scsi: lpfc: Fix possible file string name overflow when updating firmware [ Upstream commit f5779b529240b715f0e358489ad0ed933bf77c97 ] Because file_name and phba->ModelName are both declared a size 80 bytes, the extra ".grp" file extension could cause an overflow into file_name. Define a ELX_FW_NAME_SIZE macro with value 84. 84 incorporates the 4 extra characters from ".grp". file_name is changed to be declared as a char and initialized to zeros i.e. null chars. Signed-off-by: Justin Tee Link: https://lore.kernel.org/r/20231031191224.150862-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 9b9bbba16be48de15cc468ed930e0c59bb5e5d93 Author: Yonghong Song Date: Fri Nov 10 11:36:44 2023 -0800 selftests/bpf: Fix pyperf180 compilation failure with clang18 [ Upstream commit 100888fb6d8a185866b1520031ee7e3182b173de ] With latest clang18 (main branch of llvm-project repo), when building bpf selftests, [~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j The following compilation error happens: fatal error: error in backend: Branch target out of insn range ... Stack dump: 0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi -I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter /home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include -idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf -c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o 1. parser at end of file 2. Code generation ... The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay since cpu=v4 supports 32-bit branch target offset. The above failure is due to upstream llvm patch [1] where some inlining behavior are changed in clang18. To workaround the issue, previously all 180 loop iterations are fully unrolled. The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the compiler is clang18, the unrollng amount is unconditionally reduced. [1] https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e Signed-off-by: Yonghong Song Signed-off-by: Andrii Nakryiko Tested-by: Alan Maguire Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin commit 747838941f1c8e6082e166bbb0384faea943f64a Author: Andrii Nakryiko Date: Wed Nov 1 20:37:44 2023 -0700 selftests/bpf: satisfy compiler by having explicit return in btf test [ Upstream commit f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ] Some compilers complain about get_pprint_mapv_size() not returning value in some code paths. Fix with explicit return. Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin commit 69e905beca193125820c201ab3db4fb0e245124e Author: Shiji Yang Date: Sat Nov 4 16:58:00 2023 +0800 wifi: rt2x00: restart beacon queue when hardware reset [ Upstream commit a11d965a218f0cd95b13fe44d0bcd8a20ce134a8 ] When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw(). Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Sasha Levin commit cfbbb3199e71b63fc26cee0ebff327c47128a1e8 Author: Baokun Li Date: Mon Oct 23 09:30:56 2023 +0800 ext4: avoid online resizing failures due to oversized flex bg [ Upstream commit 5d1935ac02ca5aee364a449a35e2977ea84509b0 ] When we online resize an ext4 filesystem with a oversized flexbg_size, mkfs.ext4 -F -G 67108864 $dev -b 4096 100M mount $dev $dir resize2fs $dev 16G the following WARN_ON is triggered: ================================================================== WARNING: CPU: 0 PID: 427 at mm/page_alloc.c:4402 __alloc_pages+0x411/0x550 Modules linked in: sg(E) CPU: 0 PID: 427 Comm: resize2fs Tainted: G E 6.6.0-rc5+ #314 RIP: 0010:__alloc_pages+0x411/0x550 Call Trace: __kmalloc_large_node+0xa2/0x200 __kmalloc+0x16e/0x290 ext4_resize_fs+0x481/0xd80 __ext4_ioctl+0x1616/0x1d90 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xf0/0x150 do_syscall_64+0x3b/0x90 ================================================================== This is because flexbg_size is too large and the size of the new_group_data array to be allocated exceeds MAX_ORDER. Currently, the minimum value of MAX_ORDER is 8, the minimum value of PAGE_SIZE is 4096, the corresponding maximum number of groups that can be allocated is: (PAGE_SIZE << MAX_ORDER) / sizeof(struct ext4_new_group_data) ≈ 21845 And the value that is down-aligned to the power of 2 is 16384. Therefore, this value is defined as MAX_RESIZE_BG, and the number of groups added each time does not exceed this value during resizing, and is added multiple times to complete the online resizing. The difference is that the metadata in a flex_bg may be more dispersed. Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231023013057.2117948-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit e7b9fa6c298fbe6d329ffdf0c98b91938e046946 Author: Baokun Li Date: Mon Oct 23 09:30:55 2023 +0800 ext4: remove unnecessary check from alloc_flex_gd() [ Upstream commit b099eb87de105cf07cad731ded6fb40b2675108b ] In commit 967ac8af4475 ("ext4: fix potential integer overflow in alloc_flex_gd()"), an overflow check is added to alloc_flex_gd() to prevent the allocated memory from being smaller than expected due to the overflow. However, after kmalloc() is replaced with kmalloc_array() in commit 6da2ec56059c ("treewide: kmalloc() -> kmalloc_array()"), the kmalloc_array() function has an overflow check, so the above problem will not occur. Therefore, the extra check is removed. Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231023013057.2117948-3-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit b9601924226976c610e8966ea71e7b9314fb41c7 Author: Baokun Li Date: Mon Oct 23 09:30:54 2023 +0800 ext4: unify the type of flexbg_size to unsigned int [ Upstream commit 658a52344fb139f9531e7543a6e0015b630feb38 ] The maximum value of flexbg_size is 2^31, but the maximum value of int is (2^31 - 1), so overflow may occur when the type of flexbg_size is declared as int. For example, when uninit_mask is initialized in ext4_alloc_group_tables(), if flexbg_size == 2^31, the initialized uninit_mask is incorrect, and this may causes set_flexbg_block_bitmap() to trigger a BUG_ON(). Therefore, the flexbg_size type is declared as unsigned int to avoid overflow and memory waste. Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231023013057.2117948-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 64448275f8efeb88bba1926268d75afa6c3e91af Author: Ye Bin Date: Sat Dec 16 09:09:19 2023 +0800 ext4: fix inconsistent between segment fstrim and full fstrim [ Upstream commit 68da4c44b994aea797eb9821acb3a4a36015293e ] Suppose we issue two FITRIM ioctls for ranges [0,15] and [16,31] with mininum length of trimmed range set to 8 blocks. If we have say a range of blocks 10-22 free, this range will not be trimmed because it straddles the boundary of the two FITRIM ranges and neither part is big enough. This is a bit surprising to some users that call FITRIM on smaller ranges of blocks to limit impact on the system. Also XFS trims all free space extents that overlap with the specified range so we are inconsistent among filesystems. Let's change ext4_try_to_trim_range() to consider for trimming the whole free space extent that straddles the end of specified range, not just the part of it within the range. Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231216010919.1995851-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin commit 5183595c0bfd4a95c7bd5f78203d2c0f9af3568f Author: Gabriel Krisman Bertazi Date: Fri Aug 11 14:38:12 2023 -0400 ecryptfs: Reject casefold directory inodes [ Upstream commit cd72c7ef5fed44272272a105b1da22810c91be69 ] Even though it seems to be able to resolve some names of case-insensitive directories, the lack of d_hash and d_compare means we end up with a broken state in the d_cache. Considering it was never a goal to support these two together, and we are preparing to use d_revalidate in case-insensitive filesystems, which would make the combination even more broken, reject any attempt to get a casefolded inode from ecryptfs. Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Eric Biggers Signed-off-by: Sasha Levin commit c430e6bb43955c6bf573665fcebf31694925b9f7 Author: Anna Schumaker Date: Mon Nov 27 17:06:18 2023 -0500 SUNRPC: Fix a suspicious RCU usage warning [ Upstream commit 31b62908693c90d4d07db597e685d9f25a120073 ] I received the following warning while running cthon against an ontap server running pNFS: [ 57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523] 6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525] net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted 6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] [ 57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556] rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596] rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621] ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646] rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ? __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728] ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754] nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ? __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891] nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913] do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921] filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930] nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947] nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969] __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [ 57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982] RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83 ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX: 0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [ 57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP: 00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007fe2b11f8300 R11: 0000000000000202 R12: 0000000000000000 [ 57.202994] R13: 00007ffe857dfd80 R14: 00007fe2b1445000 R15: 0000000000000000 [ 57.202999] The problem seems to be that two out of three callers aren't taking the rcu_read_lock() before calling the list_for_each_entry_rcu() function in rpc_xprt_switch_has_addr(). I fix this by having rpc_xprt_switch_has_addr() unconditionaly take the rcu_read_lock(), which is okay to do recursively in the case that the lock has already been taken by a caller. Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 150a3a3871490e8c454ffbac2e60abeafcecff99 Author: Heiko Carstens Date: Thu Nov 30 18:56:00 2023 +0100 KVM: s390: fix setting of fpc register [ Upstream commit b988b1bb0053c0dcd26187d29ef07566a565cf55 ] kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (fpc) register of a guest cpu. The new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the host process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space / host process fpc register value, however it will be discarded, when returning to user space. In result the host process will incorrectly continue to run with the value that was supposed to be used for a guest cpu. Fix this by simply removing the test. There is another test right before the SIE context is entered which will handles invalid values. This results in a change of behaviour: invalid values will now be accepted instead of that the ioctl fails with -EINVAL. This seems to be acceptable, given that this interface is most likely not used anymore, and this is in addition the same behaviour implemented with the memory mapped interface (replace invalid values with zero) - see sync_regs() in kvm-s390.c. Reviewed-by: Christian Borntraeger Reviewed-by: Claudio Imbrenda Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit 856caf2730ea18cb39e95833719c02a02447dc0a Author: Heiko Carstens Date: Thu Nov 30 18:55:59 2023 +0100 s390/ptrace: handle setting of fpc register correctly [ Upstream commit 8b13601d19c541158a6e18b278c00ba69ae37829 ] If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl(). Reviewed-by: Claudio Imbrenda Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin commit e2b77d107b33bb31c8b1f5c4cb8f277b23728f1e Author: Edward Adam Davis Date: Tue Dec 12 09:36:22 2023 +0800 jfs: fix array-index-out-of-bounds in diNewExt [ Upstream commit 49f9637aafa6e63ba686c13cb8549bf5e6920402 ] [Syz report] UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2 index -878706688 is out of range for type 'struct iagctl[128]' CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360 diAllocExt fs/jfs/jfs_imap.c:1949 [inline] diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666 diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587 ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56 jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225 vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106 do_mkdirat+0x264/0x3a0 fs/namei.c:4129 __do_sys_mkdir fs/namei.c:4149 [inline] __se_sys_mkdir fs/namei.c:4147 [inline] __x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fcb7e6a0b57 Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053 RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57 RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140 RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [Analysis] When the agstart is too large, it can cause agno overflow. [Fix] After obtaining agno, if the value is invalid, exit the subsequent process. Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next report by kernel test robot (Dan Carpenter). Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 5f1f459520ed2a761fad0e132778a8a8a04c8f6a Author: Oleg Nesterov Date: Fri Nov 17 17:48:46 2023 +0100 rxrpc_find_service_conn_rcu: fix the usage of read_seqbegin_or_lock() [ Upstream commit bad1a11c0f061aa073bab785389fe04f19ba02e1 ] rxrpc_find_service_conn_rcu() should make the "seq" counter odd on the second pass, otherwise read_seqbegin_or_lock() never takes the lock. Signed-off-by: Oleg Nesterov Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20231117164846.GA10410@redhat.com/ Signed-off-by: Sasha Levin commit ae53c54ed74ccaaff7be55c411d534e05f6cff98 Author: Oleg Nesterov Date: Thu Nov 30 12:56:14 2023 +0100 afs: fix the usage of read_seqbegin_or_lock() in afs_find_server*() [ Upstream commit 1702e0654ca9a7bcd7c7619c8a5004db58945b71 ] David Howells says: (5) afs_find_server(). There could be a lot of servers in the list and each server can have multiple addresses, so I think this would be better with an exclusive second pass. The server list isn't likely to change all that often, but when it does change, there's a good chance several servers are going to be added/removed one after the other. Further, this is only going to be used for incoming cache management/callback requests from the server, which hopefully aren't going to happen too often - but it is remotely drivable. (6) afs_find_server_by_uuid(). Similarly to (5), there could be a lot of servers to search through, but they are in a tree not a flat list, so it should be faster to process. Again, it's not likely to change that often and, again, when it does change it's likely to involve multiple changes. This can be driven remotely by an incoming cache management request but is mostly going to be driven by setting up or reconfiguring a volume's server list - something that also isn't likely to happen often. Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock() never takes the lock. Signed-off-by: Oleg Nesterov Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20231130115614.GA21581@redhat.com/ Signed-off-by: Sasha Levin commit a02356d996b49a67999680f0171e032f58f7cb50 Author: Oleg Nesterov Date: Thu Nov 30 12:56:06 2023 +0100 afs: fix the usage of read_seqbegin_or_lock() in afs_lookup_volume_rcu() [ Upstream commit 4121b4337146b64560d1e46ebec77196d9287802 ] David Howells says: (2) afs_lookup_volume_rcu(). There can be a lot of volumes known by a system. A thousand would require a 10-step walk and this is drivable by remote operation, so I think this should probably take a lock on the second pass too. Make the "seq" counter odd on the 2nd pass, otherwise read_seqbegin_or_lock() never takes the lock. Signed-off-by: Oleg Nesterov Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/20231130115606.GA21571@redhat.com/ Signed-off-by: Sasha Levin commit 108c4db057916ad5f5b2c8c3285cffcc857c3fed Author: Thomas Bourgoin Date: Fri Dec 15 12:17:24 2023 +0100 crypto: stm32/crc32 - fix parsing list of devices [ Upstream commit 0eaef675b94c746900dcea7f6c41b9a103ed5d53 ] smatch warnings: drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn: can 'crc' even be NULL? Use list_first_entry_or_null instead of list_first_entry to retrieve the first device registered. The function list_first_entry always return a non NULL pointer even if the list is empty. Hence checking if the pointer returned is NULL does not tell if the list is empty or not. Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/ Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/ Signed-off-by: Thomas Bourgoin Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin commit a63e48cd835c34c38ef671d344cc029b1ea5bf10 Author: Weichen Chen Date: Fri Feb 24 10:36:32 2023 +0800 pstore/ram: Fix crash when setting number of cpus to an odd number [ Upstream commit d49270a04623ce3c0afddbf3e984cb245aa48e9c ] When the number of cpu cores is adjusted to 7 or other odd numbers, the zone size will become an odd number. The address of the zone will become: addr of zone0 = BASE addr of zone1 = BASE + zone_size addr of zone2 = BASE + zone_size*2 ... The address of zone1/3/5/7 will be mapped to non-alignment va. Eventually crashes will occur when accessing these va. So, use ALIGN_DOWN() to make sure the zone size is even to avoid this bug. Signed-off-by: Weichen Chen Reviewed-by: Matthias Brugger Tested-by: "Guilherme G. Piccoli" Link: https://lore.kernel.org/r/20230224023632.6840-1-weichen.chen@mediatek.com Signed-off-by: Kees Cook Signed-off-by: Sasha Levin commit bc6ef64dbe71136f327d63b2b9071b828af2c2a8 Author: Edward Adam Davis Date: Tue Oct 31 13:39:04 2023 +0800 jfs: fix uaf in jfs_evict_inode [ Upstream commit e0e1958f4c365e380b17ccb35617345b31ef7bf3 ] When the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. Reported-and-tested-by: syzbot+01cf2dbcbe2022454388@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 2037cb9d95f1741885f7daf50e8a028c4ade5317 Author: Manas Ghandat Date: Tue Oct 17 17:33:56 2023 +0530 jfs: fix array-index-out-of-bounds in dbAdjTree [ Upstream commit 74ecdda68242b174920fe7c6133a856fb7d8559b ] Currently there is a bound check missing in the dbAdjTree while accessing the dmt_stree. To add the required check added the bool is_ctl which is required to determine the size as suggest in the following commit. https://lore.kernel.org/linux-kernel-mentees/f9475918-2186-49b8-b801-6f0f9e75f4fa@oracle.com/ Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb Signed-off-by: Manas Ghandat Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 1c40ca3d39d769931b28295b3145c25f1decf5a6 Author: Manas Ghandat Date: Wed Oct 25 11:39:07 2023 +0530 jfs: fix slab-out-of-bounds Read in dtSearch [ Upstream commit fa5492ee89463a7590a1449358002ff7ef63529f ] Currently while searching for current page in the sorted entry table of the page there is a out of bound access. Added a bound check to fix the error. Dave: Set return code to -EIO Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202310241724.Ed02yUz9-lkp@intel.com/ Signed-off-by: Manas Ghandat Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 7aa33854477d9c346f5560a1a1fcb3fe7783e2a8 Author: Osama Muhammad Date: Sat Oct 14 00:10:28 2023 +0500 UBSAN: array-index-out-of-bounds in dtSplitRoot [ Upstream commit 27e56f59bab5ddafbcfe69ad7a4a6ea1279c1b16 ] Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900 fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80 fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013 do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000 R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13: 0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 The issue is caused when the value of fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was able to produce value less than -1 which cause the error. This patch simply add the change for the values less than 0. The patch is tested via syzbot. Reported-and-tested-by: syzbot+d4b1df2e9d4ded6488ec@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d4b1df2e9d4ded6488ec Signed-off-by: Osama Muhammad Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit de34de6e57bbbc868e4fcf9e98c76b3587cabb0b Author: Osama Muhammad Date: Wed Oct 11 23:46:37 2023 +0500 FS:JFS:UBSAN:array-index-out-of-bounds in dbAdjTree [ Upstream commit 9862ec7ac1cbc6eb5ee4a045b5d5b8edbb2f7e68 ] Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:2867:6 index 196694 is out of range for type 's8[1365]' (aka 'signed char[1365]') CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 ================================================================================ Kernel panic - not syncing: UBSAN: panic_on_warn set ... CPU: 1 PID: 109 Comm: jfsCommit Not tainted 6.6.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 panic+0x30f/0x770 kernel/panic.c:340 check_panic_on_warn+0x82/0xa0 kernel/panic.c:236 ubsan_epilogue lib/ubsan.c:223 [inline] __ubsan_handle_out_of_bounds+0x13c/0x150 lib/ubsan.c:348 dbAdjTree+0x474/0x4f0 fs/jfs/jfs_dmap.c:2867 dbJoin+0x210/0x2d0 fs/jfs/jfs_dmap.c:2834 dbFreeBits+0x4eb/0xda0 fs/jfs/jfs_dmap.c:2331 dbFreeDmap fs/jfs/jfs_dmap.c:2080 [inline] dbFree+0x343/0x650 fs/jfs/jfs_dmap.c:402 txFreeMap+0x798/0xd50 fs/jfs/jfs_txnmgr.c:2534 txUpdateMap+0x342/0x9e0 txLazyCommit fs/jfs/jfs_txnmgr.c:2664 [inline] jfs_lazycommit+0x47a/0xb70 fs/jfs/jfs_txnmgr.c:2732 kthread+0x2d3/0x370 kernel/kthread.c:388 ret_from_fork+0x48/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Kernel Offset: disabled Rebooting in 86400 seconds.. The issue is caused when the value of lp becomes greater than CTLTREESIZE which is the max size of stree. Adding a simple check solves this issue. Dave: As the function returns a void, good error handling would require a more intrusive code reorganization, so I modified Osama's patch at use WARN_ON_ONCE for lack of a cleaner option. The patch is tested via syzbot. Reported-by: syzbot+39ba34a099ac2e9bd3cb@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=39ba34a099ac2e9bd3cb Signed-off-by: Osama Muhammad Signed-off-by: Dave Kleikamp Signed-off-by: Sasha Levin commit 95c864c8114854b555e35c4b0e295cb22fda4466 Author: Shuai Xue Date: Mon Dec 18 14:45:18 2023 +0800 ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events [ Upstream commit a70297d2213253853e95f5b49651f924990c6d3b ] There are two major types of uncorrected recoverable (UCR) errors : - Synchronous error: The error is detected and raised at the point of the consumption in the execution flow, e.g. when a CPU tries to access a poisoned cache line. The CPU will take a synchronous error exception such as Synchronous External Abort (SEA) on Arm64 and Machine Check Exception (MCE) on X86. OS requires to take action (for example, offline failure page/kill failure thread) to recover this uncorrectable error. - Asynchronous error: The error is detected out of processor execution context, e.g. when an error is detected by a background scrubber. Some data in the memory are corrupted. But the data have not been consumed. OS is optional to take action to recover this uncorrectable error. When APEI firmware first is enabled, a platform may describe one error source for the handling of synchronous errors (e.g. MCE or SEA notification ), or for handling asynchronous errors (e.g. SCI or External Interrupt notification). In other words, we can distinguish synchronous errors by APEI notification. For synchronous errors, kernel will kill the current process which accessing the poisoned page by sending SIGBUS with BUS_MCEERR_AR. In addition, for asynchronous errors, kernel will notify the process who owns the poisoned page by sending SIGBUS with BUS_MCEERR_AO in early kill mode. However, the GHES driver always sets mf_flags to 0 so that all synchronous errors are handled as asynchronous errors in memory failure. To this end, set memory failure flags as MF_ACTION_REQUIRED on synchronous events. Signed-off-by: Shuai Xue Tested-by: Ma Wupeng Reviewed-by: Kefeng Wang Reviewed-by: Xiaofei Tan Reviewed-by: Baolin Wang Reviewed-by: James Morse Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 3399cc7013e761fee9d6eec795e9b31ab0cbe475 Author: Mukesh Ojha Date: Sat Nov 25 02:41:58 2023 +0530 PM / devfreq: Synchronize devfreq_monitor_[start/stop] [ Upstream commit aed5ed595960c6d301dcd4ed31aeaa7a8054c0c6 ] There is a chance if a frequent switch of the governor done in a loop result in timer list corruption where timer cancel being done from two place one from cancel_delayed_work_sync() and followed by expire_timers() can be seen from the traces[1]. while true do echo "simple_ondemand" > /sys/class/devfreq/1d84000.ufshc/governor echo "performance" > /sys/class/devfreq/1d84000.ufshc/governor done It looks to be issue with devfreq driver where device_monitor_[start/stop] need to synchronized so that delayed work should get corrupted while it is either being queued or running or being cancelled. Let's use polling flag and devfreq lock to synchronize the queueing the timer instance twice and work data being corrupted. [1] ... .. -0 [003] 9436.209662: timer_cancel timer=0xffffff80444f0428 -0 [003] 9436.209664: timer_expire_entry timer=0xffffff80444f0428 now=0x10022da1c function=__typeid__ZTSFvP10timer_listE_global_addr baseclk=0x10022da1c -0 [003] 9436.209718: timer_expire_exit timer=0xffffff80444f0428 kworker/u16:6-14217 [003] 9436.209863: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2b now=0x10022da1c flags=182452227 vendor.xxxyyy.ha-1593 [004] 9436.209888: timer_cancel timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216390: timer_init timer=0xffffff80444f0428 vendor.xxxyyy.ha-1593 [004] 9436.216392: timer_start timer=0xffffff80444f0428 function=__typeid__ZTSFvP10timer_listE_global_addr expires=0x10022da2c now=0x10022da1d flags=186646532 vendor.xxxyyy.ha-1593 [005] 9436.220992: timer_cancel timer=0xffffff80444f0428 xxxyyyTraceManag-7795 [004] 9436.261641: timer_cancel timer=0xffffff80444f0428 [2] 9436.261653][ C4] Unable to handle kernel paging request at virtual address dead00000000012a [ 9436.261664][ C4] Mem abort info: [ 9436.261666][ C4] ESR = 0x96000044 [ 9436.261669][ C4] EC = 0x25: DABT (current EL), IL = 32 bits [ 9436.261671][ C4] SET = 0, FnV = 0 [ 9436.261673][ C4] EA = 0, S1PTW = 0 [ 9436.261675][ C4] Data abort info: [ 9436.261677][ C4] ISV = 0, ISS = 0x00000044 [ 9436.261680][ C4] CM = 0, WnR = 1 [ 9436.261682][ C4] [dead00000000012a] address between user and kernel address ranges [ 9436.261685][ C4] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 9436.261701][ C4] Skip md ftrace buffer dump for: 0x3a982d0 ... [ 9436.262138][ C4] CPU: 4 PID: 7795 Comm: TraceManag Tainted: G S W O 5.10.149-android12-9-o-g17f915d29d0c #1 [ 9436.262141][ C4] Hardware name: Qualcomm Technologies, Inc. (DT) [ 9436.262144][ C4] pstate: 22400085 (nzCv daIf +PAN -UAO +TCO BTYPE=--) [ 9436.262161][ C4] pc : expire_timers+0x9c/0x438 [ 9436.262164][ C4] lr : expire_timers+0x2a4/0x438 [ 9436.262168][ C4] sp : ffffffc010023dd0 [ 9436.262171][ C4] x29: ffffffc010023df0 x28: ffffffd0636fdc18 [ 9436.262178][ C4] x27: ffffffd063569dd0 x26: ffffffd063536008 [ 9436.262182][ C4] x25: 0000000000000001 x24: ffffff88f7c69280 [ 9436.262185][ C4] x23: 00000000000000e0 x22: dead000000000122 [ 9436.262188][ C4] x21: 000000010022da29 x20: ffffff8af72b4e80 [ 9436.262191][ C4] x19: ffffffc010023e50 x18: ffffffc010025038 [ 9436.262195][ C4] x17: 0000000000000240 x16: 0000000000000201 [ 9436.262199][ C4] x15: ffffffffffffffff x14: ffffff889f3c3100 [ 9436.262203][ C4] x13: ffffff889f3c3100 x12: 00000000049f56b8 [ 9436.262207][ C4] x11: 00000000049f56b8 x10: 00000000ffffffff [ 9436.262212][ C4] x9 : ffffffc010023e50 x8 : dead000000000122 [ 9436.262216][ C4] x7 : ffffffffffffffff x6 : ffffffc0100239d8 [ 9436.262220][ C4] x5 : 0000000000000000 x4 : 0000000000000101 [ 9436.262223][ C4] x3 : 0000000000000080 x2 : ffffff889edc155c [ 9436.262227][ C4] x1 : ffffff8001005200 x0 : ffffff80444f0428 [ 9436.262232][ C4] Call trace: [ 9436.262236][ C4] expire_timers+0x9c/0x438 [ 9436.262240][ C4] __run_timers+0x1f0/0x330 [ 9436.262245][ C4] run_timer_softirq+0x28/0x58 [ 9436.262255][ C4] efi_header_end+0x168/0x5ec [ 9436.262265][ C4] __irq_exit_rcu+0x108/0x124 [ 9436.262274][ C4] __handle_domain_irq+0x118/0x1e4 [ 9436.262282][ C4] gic_handle_irq.30369+0x6c/0x2bc [ 9436.262286][ C4] el0_irq_naked+0x60/0x6c Link: https://lore.kernel.org/all/1700860318-4025-1-git-send-email-quic_mojha@quicinc.com/ Reported-by: Joyyoung Huang Acked-by: MyungJoo Ham Signed-off-by: Mukesh Ojha Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin commit b17a71435e7e153e949df018244a98b4ede04069 Author: Prarit Bhargava Date: Mon Dec 4 13:00:37 2023 -0500 ACPI: extlog: fix NULL pointer dereference check [ Upstream commit 72d9b9747e78979510e9aafdd32eb99c7aa30dd1 ] The gcc plugin -fanalyzer [1] tries to detect various patterns of incorrect behaviour. The tool reports: drivers/acpi/acpi_extlog.c: In function ‘extlog_exit’: drivers/acpi/acpi_extlog.c:307:12: warning: check of ‘extlog_l1_addr’ for NULL after already dereferencing it [-Wanalyzer-deref-before-check] | | 306 | ((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN; | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ | | | | | (1) pointer ‘extlog_l1_addr’ is dereferenced here | 307 | if (extlog_l1_addr) | | ~ | | | | | (2) pointer ‘extlog_l1_addr’ is checked for NULL here but it was already dereferenced at (1) | Fix the NULL pointer dereference check in extlog_exit(). Link: https://gcc.gnu.org/onlinedocs/gcc-10.1.0/gcc/Static-Analyzer-Options.html # [1] Signed-off-by: Prarit Bhargava Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit c2615948536a3f3d0c03da9af773ea93aee50585 Author: Dmitry Antipov Date: Tue Nov 28 05:52:10 2023 +0300 PNP: ACPI: fix fortify warning [ Upstream commit ba3f5058db437d919f8468db50483dd9028ff688 ] When compiling with gcc version 14.0.0 20231126 (experimental) and CONFIG_FORTIFY_SOURCE=y, I've noticed the following: In file included from ./include/linux/string.h:295, from ./include/linux/bitmap.h:12, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/paravirt.h:17, from ./arch/x86/include/asm/cpuid.h:62, from ./arch/x86/include/asm/processor.h:19, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:60, from ./arch/x86/include/asm/preempt.h:9, from ./include/linux/preempt.h:79, from ./include/linux/spinlock.h:56, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:7, from ./include/linux/slab.h:16, from ./include/linux/resource_ext.h:11, from ./include/linux/acpi.h:13, from drivers/pnp/pnpacpi/rsparser.c:11: In function 'fortify_memcpy_chk', inlined from 'pnpacpi_parse_allocated_vendor' at drivers/pnp/pnpacpi/rsparser.c:158:3, inlined from 'pnpacpi_allocated_resource' at drivers/pnp/pnpacpi/rsparser.c:249:3: ./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 588 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ According to the comments in include/linux/fortify-string.h, 'memcpy()', 'memmove()' and 'memset()' must not be used beyond individual struct members to ensure that the compiler can enforce protection against buffer overflows, and, IIUC, this also applies to partial copies from the particular member ('vendor->byte_data' in this case). So it should be better (and safer) to do both copies at once (and 'byte_data' of 'struct acpi_resource_vendor_typed' seems to be a good candidate for '__counted_by(byte_length)' as well). Signed-off-by: Dmitry Antipov Reviewed-by: Kees Cook Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 3a13ed6298c45e932d14ba01fd7079e34b836836 Author: Yuluo Qiu Date: Sun Nov 26 21:59:13 2023 +0800 ACPI: video: Add quirk for the Colorful X15 AT 23 Laptop [ Upstream commit 143176a46bdd3bfbe9ba2462bf94458e80d65ebf ] The Colorful X15 AT 23 ACPI video-bus device report spurious ACPI_VIDEO_NOTIFY_CYCLE events resulting in spurious KEY_SWITCHVIDEOMODE events being reported to userspace (and causing trouble there) when an external screen plugged in. Add a quirk setting the report_key_events mask to REPORT_BRIGHTNESS_KEY_EVENTS so that the ACPI_VIDEO_NOTIFY_CYCLE events will be ignored, while still reporting brightness up/down hotkey-presses to userspace normally. Signed-off-by: Yuluo Qiu Co-developed-by: Celeste Liu Signed-off-by: Celeste Liu Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit c74b2af2ccbc0f19219b825f79160dae85960eed Author: Chris Riches Date: Wed Oct 18 09:23:51 2023 +0000 audit: Send netlink ACK before setting connection in auditd_set [ Upstream commit 022732e3d846e197539712e51ecada90ded0572a ] When auditd_set sets the auditd_conn pointer, audit messages can immediately be put on the socket by other kernel threads. If the backlog is large or the rate is high, this can immediately fill the socket buffer. If the audit daemon requested an ACK for this operation, a full socket buffer causes the ACK to get dropped, also setting ENOBUFS on the socket. To avoid this race and ensure ACKs get through, fast-track the ACK in this specific case to ensure it is sent before auditd_conn is set. Signed-off-by: Chris Riches [PM: fix some tab vs space damage] Signed-off-by: Paul Moore Signed-off-by: Sasha Levin commit 37e00ed71e8643a71ee397ebc901a5077cd7af30 Author: Rui Zhang Date: Fri Nov 3 15:42:31 2023 +0800 regulator: core: Only increment use_count when enable_count changes [ Upstream commit 7993d3a9c34f609c02171e115fd12c10e2105ff4 ] The use_count of a regulator should only be incremented when the enable_count changes from 0 to 1. Similarly, the use_count should only be decremented when the enable_count changes from 1 to 0. In the previous implementation, use_count was sometimes decremented to 0 when some consumer called unbalanced disable, leading to unexpected disable even the regulator is enabled by other consumers. With this change, the use_count accurately reflects the number of users which the regulator is enabled. This should make things more robust in the case where a consumer does leak references. Signed-off-by: Rui Zhang Link: https://lore.kernel.org/r/20231103074231.8031-1-zr.zhang@vivo.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit 19c71322702dc244af2fa0a7e9a0d9592d0ea79e Author: Andrzej Hajda Date: Wed Oct 25 23:39:07 2023 +0200 debugobjects: Stop accessing objects after releasing hash bucket lock [ Upstream commit 9bb6362652f3f4d74a87d572a91ee1b38e673ef6 ] After release of the hashbucket lock the tracking object can be modified or freed by a concurrent thread. Using it in such a case is error prone, even for printing the object state: 1. T1 tries to deactivate destroyed object, debugobjects detects it, hash bucket lock is released. 2. T2 preempts T1 and frees the tracking object. 3. The freed tracking object is allocated and initialized for a different to be tracked kernel object. 4. T1 resumes and reports error for wrong kernel object. Create a local copy of the tracking object before releasing the hash bucket lock and use the local copy for reporting and fixups to prevent this. Signed-off-by: Andrzej Hajda Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20231025-debugobjects_fix-v3-1-2bc3bf7084c2@intel.com Signed-off-by: Sasha Levin commit c57cb397fe23516d3ba9374f3a0060714e01d7c8 Author: Greg KH Date: Mon Jun 12 15:09:09 2023 +0200 perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file [ Upstream commit 652ffc2104ec1f69dd4a46313888c33527145ccf ] Signed-off-by: Greg Kroah-Hartman Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/2023061204-decal-flyable-6090@gregkh Signed-off-by: Sasha Levin commit 5224b9db24f6bbb46a611fd33f899c740b95f3ee Author: Zhiquan Li Date: Thu Oct 26 08:39:03 2023 +0800 x86/mce: Mark fatal MCE's page as poison to avoid panic in the kdump kernel [ Upstream commit 9f3b130048bfa2e44a8cfb1b616f826d9d5d8188 ] Memory errors don't happen very often, especially fatal ones. However, in large-scale scenarios such as data centers, that probability increases with the amount of machines present. When a fatal machine check happens, mce_panic() is called based on the severity grading of that error. The page containing the error is not marked as poison. However, when kexec is enabled, tools like makedumpfile understand when pages are marked as poison and do not touch them so as not to cause a fatal machine check exception again while dumping the previous kernel's memory. Therefore, mark the page containing the error as poisoned so that the kexec'ed kernel can avoid accessing the page. [ bp: Rewrite commit message and comment. ] Co-developed-by: Youquan Song Signed-off-by: Youquan Song Signed-off-by: Zhiquan Li Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Naoya Horiguchi Link: https://lore.kernel.org/r/20231014051754.3759099-1-zhiquan1.li@intel.com Signed-off-by: Sasha Levin commit beee482cc4c9a6b1dcffb2e190b4fd8782258678 Author: Naveen N Rao Date: Thu Nov 23 12:47:05 2023 +0530 powerpc/lib: Validate size for vector operations [ Upstream commit 8f9abaa6d7de0a70fc68acaedce290c1f96e2e59 ] Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. Signed-off-by: Naveen N Rao Reviewed-by: Gustavo A. R. Silva Build-tested-by: Gustavo A. R. Silva Signed-off-by: Michael Ellerman Link: https://msgid.link/20231123071705.397625-1-naveen@kernel.org Signed-off-by: Sasha Levin commit 24a58abcfff3ea80b5ce410648ecca5c07f35b0c Author: Stephen Rothwell Date: Mon Nov 27 13:28:09 2023 +1100 powerpc: pmd_move_must_withdraw() is only needed for CONFIG_TRANSPARENT_HUGEPAGE [ Upstream commit 0d555b57ee660d8a871781c0eebf006e855e918d ] The linux-next build of powerpc64 allnoconfig fails with: arch/powerpc/mm/book3s64/pgtable.c:557:5: error: no previous prototype for 'pmd_move_must_withdraw' 557 | int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl, | ^~~~~~~~~~~~~~~~~~~~~~ Caused by commit: c6345dfa6e3e ("Makefile.extrawarn: turn on missing-prototypes globally") Fix it by moving the function definition under CONFIG_TRANSPARENT_HUGEPAGE like the prototype. The function is only called when CONFIG_TRANSPARENT_HUGEPAGE=y. Signed-off-by: Stephen Rothwell [mpe: Flesh out change log from linux-next patch] Signed-off-by: Michael Ellerman Link: https://msgid.link/20231127132809.45c2b398@canb.auug.org.au Signed-off-by: Sasha Levin commit 02e5b2ff47530d4dbb82e5b98ddb6ccdd24cafce Author: Jun'ichi Nomura Date: Wed Nov 29 15:44:49 2023 -0500 x86/boot: Ignore NMIs during very early boot [ Upstream commit 78a509fba9c9b1fcb77f95b7c6be30da3d24823a ] When there are two racing NMIs on x86, the first NMI invokes NMI handler and the 2nd NMI is latched until IRET is executed. If panic on NMI and panic kexec are enabled, the first NMI triggers panic and starts booting the next kernel via kexec. Note that the 2nd NMI is still latched. During the early boot of the next kernel, once an IRET is executed as a result of a page fault, then the 2nd NMI is unlatched and invokes the NMI handler. However, NMI handler is not set up at the early stage of boot, which results in a boot failure. Avoid such problems by setting up a NOP handler for early NMIs. [ mingo: Refined the changelog. ] Signed-off-by: Jun'ichi Nomura Signed-off-by: Derek Barbosa Signed-off-by: Ingo Molnar Cc: Kees Cook Cc: Linus Torvalds Cc: Paul E. McKenney Cc: Andy Lutomirski Cc: "H. Peter Anvin" Cc: Peter Zijlstra Signed-off-by: Sasha Levin commit 9d06c199d8813638433969072b855ae5d279ab62 Author: Michael Ellerman Date: Thu Nov 30 22:44:32 2023 +1100 powerpc/mm: Fix build failures due to arch_reserved_kernel_pages() [ Upstream commit d8c3f243d4db24675b653f0568bb65dae34e6455 ] With NUMA=n and FA_DUMP=y or PRESERVE_FA_DUMP=y the build fails with: arch/powerpc/kernel/fadump.c:1739:22: error: no previous prototype for ‘arch_reserved_kernel_pages’ [-Werror=missing-prototypes] 1739 | unsigned long __init arch_reserved_kernel_pages(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ The prototype for arch_reserved_kernel_pages() is in include/linux/mm.h, but it's guarded by __HAVE_ARCH_RESERVED_KERNEL_PAGES. The powerpc headers define __HAVE_ARCH_RESERVED_KERNEL_PAGES in asm/mmzone.h, which is not included into the generic headers when NUMA=n. Move the definition of __HAVE_ARCH_RESERVED_KERNEL_PAGES into asm/mmu.h which is included regardless of NUMA=n. Additionally the ifdef around __HAVE_ARCH_RESERVED_KERNEL_PAGES needs to also check for CONFIG_PRESERVE_FA_DUMP. Signed-off-by: Michael Ellerman Link: https://msgid.link/20231130114433.3053544-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin commit 3928c06363de5c76cdeb527214f5ab720e739f5e Author: Michael Ellerman Date: Thu Nov 30 22:44:33 2023 +1100 powerpc: Fix build error due to is_valid_bugaddr() [ Upstream commit f8d3555355653848082c351fa90775214fb8a4fa ] With CONFIG_GENERIC_BUG=n the build fails with: arch/powerpc/kernel/traps.c:1442:5: error: no previous prototype for ‘is_valid_bugaddr’ [-Werror=missing-prototypes] 1442 | int is_valid_bugaddr(unsigned long addr) | ^~~~~~~~~~~~~~~~ The prototype is only defined, and the function is only needed, when CONFIG_GENERIC_BUG=y, so move the implementation under that. Signed-off-by: Michael Ellerman Link: https://msgid.link/20231130114433.3053544-2-mpe@ellerman.id.au Signed-off-by: Sasha Levin commit 353496cb35e263823a2fa2907a7cfd9739e9801f Author: Mark Rutland Date: Mon Dec 4 11:58:47 2023 +0000 drivers/perf: pmuv3: don't expose SW_INCR event in sysfs [ Upstream commit ca6f537e459e2da4b331fe8928d1a0b0f9301f42 ] The SW_INCR event is somewhat unusual, and depends on the specific HW counter that it is programmed into. When programmed into PMEVCNTR, SW_INCR will count any writes to PMSWINC_EL0 with bit n set, ignoring writes to SW_INCR with bit n clear. Event rotation means that there's no fixed relationship between perf_events and HW counters, so this isn't all that useful. Further, we program PMUSERENR.{SW,EN}=={0,0}, which causes EL0 writes to PMSWINC_EL0 to be trapped and handled as UNDEFINED, resulting in a SIGILL to userspace. Given that, it's not a good idea to expose SW_INCR in sysfs. Hide it as we did for CHAIN back in commit: 4ba2578fa7b55701 ("arm64: perf: don't expose CHAIN event in sysfs") Signed-off-by: Mark Rutland Cc: Will Deacon Link: https://lore.kernel.org/r/20231204115847.2993026-1-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin commit aa28eecb43cac6e20ef14dfc50b8892c1fbcda5b Author: Kunwu Chan Date: Mon Dec 4 10:32:23 2023 +0800 powerpc/mm: Fix null-pointer dereference in pgtable_cache_add [ Upstream commit f46c8a75263f97bda13c739ba1c90aced0d3b071 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Suggested-by: Christophe Leroy Suggested-by: Michael Ellerman Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231204023223.2447523-1-chentao@kylinos.cn Signed-off-by: Sasha Levin commit 4e806600eb1402c2c6e4b90deb87422c18fb8246 Author: Richard Palethorpe Date: Wed Jan 10 15:01:22 2024 +0200 x86/entry/ia32: Ensure s32 is sign extended to s64 commit 56062d60f117dccfb5281869e0ab61e090baf864 upstream. Presently ia32 registers stored in ptregs are unconditionally cast to unsigned int by the ia32 stub. They are then cast to long when passed to __se_sys*, but will not be sign extended. This takes the sign of the syscall argument into account in the ia32 stub. It still casts to unsigned int to avoid implementation specific behavior. However then casts to int or unsigned int as necessary. So that the following cast to long sign extends the value. This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the maximum number of events. It doesn't appear other systemcalls with signed arguments are effected because they all have compat variants defined and wired up. Fixes: ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32") Suggested-by: Arnd Bergmann Signed-off-by: Richard Palethorpe Signed-off-by: Nikolay Borisov Signed-off-by: Thomas Gleixner Reviewed-by: Arnd Bergmann Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/ Signed-off-by: Greg Kroah-Hartman commit cdc01845df117ddee27068e79f4a5891d6cb3833 Author: Tim Chen Date: Mon Jan 22 15:35:34 2024 -0800 tick/sched: Preserve number of idle sleeps across CPU hotplug events commit 9a574ea9069be30b835a3da772c039993c43369b upstream. Commit 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug") preserved total idle sleep time and iowait sleeptime across CPU hotplug events. Similar reasoning applies to the number of idle calls and idle sleeps to get the proper average of sleep time per idle invocation. Preserve those fields too. Fixes: 71fee48f ("tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug") Signed-off-by: Tim Chen Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240122233534.3094238-1-tim.c.chen@linux.intel.com Signed-off-by: Greg Kroah-Hartman commit 3736a7832bfe821568adba5c7656546c9eae3449 Author: Xi Ruoyao Date: Sat Jan 27 05:05:57 2024 +0800 mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan commit 59be5c35850171e307ca5d3d703ee9ff4096b948 upstream. If we still own the FPU after initializing fcr31, when we are preempted the dirty value in the FPU will be read out and stored into fcr31, clobbering our setting. This can cause an improper floating-point environment after execve(). For example: zsh% cat measure.c #include int main() { return fetestexcept(FE_INEXACT); } zsh% cc measure.c -o measure -lm zsh% echo $((1.0/3)) # raising FE_INEXACT 0.33333333333333331 zsh% while ./measure; do ; done (stopped in seconds) Call lose_fpu(0) before setting fcr31 to prevent this. Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman commit 95a8a5193e06b2026ce943d1c8501d1d41b9c6ae Author: Kamal Dasu Date: Tue Jan 9 16:00:32 2024 -0500 spi: bcm-qspi: fix SFDP BFPT read by usig mspi read [ Upstream commit 574bf7bbe83794a902679846770f75a9b7f28176 ] SFDP read shall use the mspi reads when using the bcm_qspi_exec_mem_op() call. This fixes SFDP parameter page read failures seen with parts that now use SFDP protocol to read the basic flash parameter table. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu Tested-by: Florian Fainelli Reviewed-by: Florian Fainelli Link: https://msgid.link/r/20240109210033.43249-1-kamal.dasu@broadcom.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin commit f1ba5bf9e0ac229f1687cbd91adc1ce941e2fe90 Author: Wenhua Lin Date: Tue Jan 9 15:38:48 2024 +0800 gpio: eic-sprd: Clear interrupt after set the interrupt type [ Upstream commit 84aef4ed59705585d629e81d633a83b7d416f5fb ] The raw interrupt status of eic maybe set before the interrupt is enabled, since the eic interrupt has a latch function, which would trigger the interrupt event once enabled it from user side. To solve this problem, interrupts generated before setting the interrupt trigger type are ignored. Fixes: 25518e024e3a ("gpio: Add Spreadtrum EIC driver support") Acked-by: Chunyan Zhang Signed-off-by: Wenhua Lin Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin commit 0924bcd2fd49138633eeb2e9591a0d821c7e4b1e Author: Fedor Pchelkin Date: Wed Dec 20 12:53:15 2023 +0300 drm/exynos: gsc: minor fix for loop iteration in gsc_runtime_resume [ Upstream commit 4050957c7c2c14aa795dbf423b4180d5ac04e113 ] Do not forget to call clk_disable_unprepare() on the first element of ctx->clocks array. Found by Linux Verification Center (linuxtesting.org). Fixes: 8b7d3ec83aba ("drm/exynos: gsc: Convert driver to IPP v2 core API") Signed-off-by: Fedor Pchelkin Reviewed-by: Marek Szyprowski Signed-off-by: Inki Dae Signed-off-by: Sasha Levin commit b6abe30de368debdc44e3caf296834d75daf3f5e Author: Arnd Bergmann Date: Thu Dec 14 13:32:15 2023 +0100 drm/exynos: fix accidental on-stack copy of exynos_drm_plane [ Upstream commit 960b537e91725bcb17dd1b19e48950e62d134078 ] gcc rightfully complains about excessive stack usage in the fimd_win_set_pixfmt() function: drivers/gpu/drm/exynos/exynos_drm_fimd.c: In function 'fimd_win_set_pixfmt': drivers/gpu/drm/exynos/exynos_drm_fimd.c:750:1: error: the frame size of 1032 bytes is larger than 1024 byte drivers/gpu/drm/exynos/exynos5433_drm_decon.c: In function 'decon_win_set_pixfmt': drivers/gpu/drm/exynos/exynos5433_drm_decon.c:381:1: error: the frame size of 1032 bytes is larger than 1024 bytes There is really no reason to copy the large exynos_drm_plane structure to the stack before using one of its members, so just use a pointer instead. Fixes: 6f8ee5c21722 ("drm/exynos: fimd: Make plane alpha configurable") Signed-off-by: Arnd Bergmann Reviewed-by: Marek Szyprowski Signed-off-by: Inki Dae Signed-off-by: Sasha Levin commit 4e56c5a9b9cfc0a72aa4d57a2ce5ce3ccb835b67 Author: Markus Niebel Date: Thu Oct 12 10:42:08 2023 +0200 drm: panel-simple: add missing bus flags for Tianma tm070jvhg[30/33] [ Upstream commit 45dd7df26cee741b31c25ffdd44fb8794eb45ccd ] The DE signal is active high on this display, fill in the missing bus_flags. This aligns panel_desc with its display_timing. Fixes: 9a2654c0f62a ("drm/panel: Add and fill drm_panel type field") Fixes: b3bfcdf8a3b6 ("drm/panel: simple: add Tianma TM070JVHG33") Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein Reviewed-by: Sam Ravnborg Link: https://lore.kernel.org/r/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231012084208.2731650-1-alexander.stein@ew.tq-group.com Signed-off-by: Sasha Levin commit e1c50b0c6242b780ecd77254ae69a4b3c4977a23 Author: Omar Sandoval Date: Thu Jan 4 11:48:47 2024 -0800 btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted [ Upstream commit 3324d0547861b16cf436d54abba7052e0c8aa9de ] Sweet Tea spotted a race between subvolume deletion and snapshotting that can result in the root item for the snapshot having the BTRFS_ROOT_SUBVOL_DEAD flag set. The race is: Thread 1 | Thread 2 ----------------------------------------------|---------- btrfs_delete_subvolume | btrfs_set_root_flags(BTRFS_ROOT_SUBVOL_DEAD)| |btrfs_mksubvol | down_read(subvol_sem) | create_snapshot | ... | create_pending_snapshot | copy root item from source down_write(subvol_sem) | This flag is only checked in send and swap activate, which this would cause to fail mysteriously. create_snapshot() now checks the root refs to reject a deleted subvolume, so we can fix this by locking subvol_sem earlier so that the BTRFS_ROOT_SUBVOL_DEAD flag and the root refs are updated atomically. CC: stable@vger.kernel.org # 4.14+ Reported-by: Sweet Tea Dorminy Reviewed-by: Sweet Tea Dorminy Reviewed-by: Anand Jain Signed-off-by: Omar Sandoval Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit d073f4608b47d2533c0a6a9e72276b8a5530c5f0 Author: Nikolay Borisov Date: Tue Nov 24 17:49:30 2020 +0200 btrfs: remove err variable from btrfs_delete_subvolume [ Upstream commit ee0d904fd9c5662c58a737c77384f8959fdc8d12 ] Use only a single 'ret' to control whether we should abort the transaction or not. That's fine, because if we abort a transaction then btrfs_end_transaction will return the same value as passed to btrfs_abort_transaction. No semantic changes. Signed-off-by: Nikolay Borisov Reviewed-by: David Sterba Signed-off-by: David Sterba Stable-dep-of: 3324d0547861 ("btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted") Signed-off-by: Sasha Levin commit 90ad17575d26874287271127d43ef3c2af876cea Author: Charan Teja Kalla Date: Fri Oct 13 18:34:27 2023 +0530 mm/sparsemem: fix race in accessing memory_section->usage [ Upstream commit 5ec8e8ea8b7783fab150cf86404fc38cb4db8800 ] The below race is observed on a PFN which falls into the device memory region with the system memory configuration where PFN's are such that [ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL]. Since normal zone start and end pfn contains the device memory PFN's as well, the compaction triggered will try on the device memory PFN's too though they end up in NOP(because pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections). When from other core, the section mappings are being removed for the ZONE_DEVICE region, that the PFN in question belongs to, on which compaction is currently being operated is resulting into the kernel crash with CONFIG_SPASEMEM_VMEMAP enabled. The crash logs can be seen at [1]. compact_zone() memunmap_pages ------------- --------------- __pageblock_pfn_to_page ...... (a)pfn_valid(): valid_section()//return true (b)__remove_pages()-> sparse_remove_section()-> section_deactivate(): [Free the array ms->usage and set ms->usage = NULL] pfn_section_valid() [Access ms->usage which is NULL] NOTE: From the above it can be said that the race is reduced to between the pfn_valid()/pfn_section_valid() and the section deactivate with SPASEMEM_VMEMAP enabled. The commit b943f045a9af("mm/sparse: fix kernel crash with pfn_section_valid check") tried to address the same problem by clearing the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns false thus ms->usage is not accessed. Fix this issue by the below steps: a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage. b) RCU protected read side critical section will either return NULL when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage. c) Free the ->usage with kfree_rcu() and set ms->usage = NULL. No attempt will be made to access ->usage after this as the SECTION_HAS_MEM_MAP is cleared thus valid_section() return false. Thanks to David/Pavan for their inputs on this patch. [1] https://lore.kernel.org/linux-mm/994410bb-89aa-d987-1f50-f514903c55aa@quicinc.com/ On Snapdragon SoC, with the mentioned memory configuration of PFN's as [ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of issues daily while testing on a device farm. For this particular issue below is the log. Though the below log is not directly pointing to the pfn_section_valid(){ ms->usage;}, when we loaded this dump on T32 lauterbach tool, it is pointing. [ 540.578056] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 540.578068] Mem abort info: [ 540.578070] ESR = 0x0000000096000005 [ 540.578073] EC = 0x25: DABT (current EL), IL = 32 bits [ 540.578077] SET = 0, FnV = 0 [ 540.578080] EA = 0, S1PTW = 0 [ 540.578082] FSC = 0x05: level 1 translation fault [ 540.578085] Data abort info: [ 540.578086] ISV = 0, ISS = 0x00000005 [ 540.578088] CM = 0, WnR = 0 [ 540.579431] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBSBTYPE=--) [ 540.579436] pc : __pageblock_pfn_to_page+0x6c/0x14c [ 540.579454] lr : compact_zone+0x994/0x1058 [ 540.579460] sp : ffffffc03579b510 [ 540.579463] x29: ffffffc03579b510 x28: 0000000000235800 x27:000000000000000c [ 540.579470] x26: 0000000000235c00 x25: 0000000000000068 x24:ffffffc03579b640 [ 540.579477] x23: 0000000000000001 x22: ffffffc03579b660 x21:0000000000000000 [ 540.579483] x20: 0000000000235bff x19: ffffffdebf7e3940 x18:ffffffdebf66d140 [ 540.579489] x17: 00000000739ba063 x16: 00000000739ba063 x15:00000000009f4bff [ 540.579495] x14: 0000008000000000 x13: 0000000000000000 x12:0000000000000001 [ 540.579501] x11: 0000000000000000 x10: 0000000000000000 x9 :ffffff897d2cd440 [ 540.579507] x8 : 0000000000000000 x7 : 0000000000000000 x6 :ffffffc03579b5b4 [ 540.579512] x5 : 0000000000027f25 x4 : ffffffc03579b5b8 x3 :0000000000000001 [ 540.579518] x2 : ffffffdebf7e3940 x1 : 0000000000235c00 x0 :0000000000235800 [ 540.579524] Call trace: [ 540.579527] __pageblock_pfn_to_page+0x6c/0x14c [ 540.579533] compact_zone+0x994/0x1058 [ 540.579536] try_to_compact_pages+0x128/0x378 [ 540.579540] __alloc_pages_direct_compact+0x80/0x2b0 [ 540.579544] __alloc_pages_slowpath+0x5c0/0xe10 [ 540.579547] __alloc_pages+0x250/0x2d0 [ 540.579550] __iommu_dma_alloc_noncontiguous+0x13c/0x3fc [ 540.579561] iommu_dma_alloc+0xa0/0x320 [ 540.579565] dma_alloc_attrs+0xd4/0x108 [quic_charante@quicinc.com: use kfree_rcu() in place of synchronize_rcu(), per David] Link: https://lkml.kernel.org/r/1698403778-20938-1-git-send-email-quic_charante@quicinc.com Link: https://lkml.kernel.org/r/1697202267-23600-1-git-send-email-quic_charante@quicinc.com Fixes: f46edbd1b151 ("mm/sparsemem: add helpers track active portions of a section at boot") Signed-off-by: Charan Teja Kalla Cc: Aneesh Kumar K.V Cc: Dan Williams Cc: David Hildenbrand Cc: Mel Gorman Cc: Oscar Salvador Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin commit 74a80f8dda6a1301471ecc7c0365bdefcd6852be Author: Rolf Eike Beer Date: Fri Nov 5 13:38:15 2021 -0700 mm: use __pfn_to_section() instead of open coding it [ Upstream commit f1dc0db296bd25960273649fc6ef2ecbf5aaa0e0 ] It is defined in the same file just a few lines above. Link: https://lkml.kernel.org/r/4598487.Rc0NezkW7i@mobilepool36.emlix.com Signed-off-by: Rolf Eike Beer Reviewed-by: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") Signed-off-by: Sasha Levin commit 43872f44eee6c6781fea1348b38885d8e78face9 Author: Zheng Wang Date: Mon Nov 6 15:48:10 2023 +0100 media: mtk-jpeg: Fix use after free bug due to error path handling in mtk_jpeg_dec_device_run [ Upstream commit 206c857dd17d4d026de85866f1b5f0969f2a109e ] In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with mtk_jpeg_job_timeout_work. In mtk_jpeg_dec_device_run, if error happens in mtk_jpeg_set_dec_dst, it will finally start the worker while mark the job as finished by invoking v4l2_m2m_job_finish. There are two methods to trigger the bug. If we remove the module, it which will call mtk_jpeg_remove to make cleanup. The possible sequence is as follows, which will cause a use-after-free bug. CPU0 CPU1 mtk_jpeg_dec_... | start worker | |mtk_jpeg_job_timeout_work mtk_jpeg_remove | v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use If we close the file descriptor, which will call mtk_jpeg_release, it will have a similar sequence. Fix this bug by starting timeout worker only if started jpegdec worker successfully. Then v4l2_m2m_job_finish will only be called in either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run. Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver") Signed-off-by: Zheng Wang Signed-off-by: Dmitry Osipenko Cc: stable@vger.kernel.org Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 9087d0c2ba04f4bc3da677f22b1fa6c7746f67a7 Author: Johan Hovold Date: Mon Nov 20 17:43:23 2023 +0100 arm64: dts: qcom: sc7180: fix USB wakeup interrupt types [ Upstream commit 9b956999bf725fd62613f719c3178fdbee6e5f47 ] The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin commit 3de807b14036f0452c50cf4e507e8cd396e5db51 Author: Sandeep Maheswaram Date: Thu Jul 9 00:40:17 2020 +0530 arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts [ Upstream commit 1e6e6e7a080ca3c1e807473e067ef04d4d005097 ] Using pdc interrupts for USB instead of GIC interrupts to support wake up in case xo shutdown. Reviewed-by: Stephen Boyd Signed-off-by: Sandeep Maheswaram Link: https://lore.kernel.org/r/1594235417-23066-4-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson Stable-dep-of: 9b956999bf72 ("arm64: dts: qcom: sc7180: fix USB wakeup interrupt types") Signed-off-by: Sasha Levin commit 8b2c7bb60510d4c45f2e6f5fc25823c2c1f8fc37 Author: Paul Cercueil Date: Wed Dec 6 23:15:54 2023 +0100 ARM: dts: samsung: exynos4210-i9100: Unconditionally enable LDO12 [ Upstream commit 84228d5e29dbc7a6be51e221000e1d122125826c ] The kernel hangs for a good 12 seconds without any info being printed to dmesg, very early in the boot process, if this regulator is not enabled. Force-enable it to work around this issue, until we know more about the underlying problem. Signed-off-by: Paul Cercueil Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2") Cc: stable@vger.kernel.org # v5.8+ Link: https://lore.kernel.org/r/20231206221556.15348-2-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin commit 162ae0e78bdabf84ef10c1293c4ed7865cb7d3c8 Author: Lukas Schauer Date: Fri Dec 1 11:11:28 2023 +0100 pipe: wakeup wr_wait after setting max_usage [ Upstream commit e95aada4cb93d42e25c30a0ef9eb2923d9711d4a ] Commit c73be61cede5 ("pipe: Add general notification queue support") a regression was introduced that would lock up resized pipes under certain conditions. See the reproducer in [1]. The commit resizing the pipe ring size was moved to a different function, doing that moved the wakeup for pipe->wr_wait before actually raising pipe->max_usage. If a pipe was full before the resize occured it would result in the wakeup never actually triggering pipe_write. Set @max_usage and @nr_accounted before waking writers if this isn't a watch queue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=212295 [1] Link: https://lore.kernel.org/r/20231201-orchideen-modewelt-e009de4562c6@brauner Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reviewed-by: David Howells Cc: Signed-off-by: Lukas Schauer [Christian Brauner : rewrite to account for watch queues] Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin commit b6f27626f56e44c2437cf66e183e9e1a844cac19 Author: Max Kellermann Date: Thu Sep 21 09:57:53 2023 +0200 fs/pipe: move check to pipe_has_watch_queue() [ Upstream commit b4bd6b4bac8edd61eb8f7b836969d12c0c6af165 ] This declutters the code by reducing the number of #ifdefs and makes the watch_queue checks simpler. This has no runtime effect; the machine code is identical. Signed-off-by: Max Kellermann Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com> Reviewed-by: David Howells Signed-off-by: Christian Brauner Stable-dep-of: e95aada4cb93 ("pipe: wakeup wr_wait after setting max_usage") Signed-off-by: Sasha Levin commit f46eb832389f162ad13cb780d0b8cde93641990d Author: Rafael J. Wysocki Date: Wed Dec 27 21:41:06 2023 +0100 PM: sleep: Fix possible deadlocks in core system-wide PM code [ Upstream commit 7839d0078e0d5e6cc2fa0b0dfbee71de74f1e557 ] It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false. Link: https://lore.kernel.org/linux-pm/ZYvjiqX6EsL15moe@perf/ Reported-by: Youngmin Nam Signed-off-by: Rafael J. Wysocki Reviewed-by: Stanislaw Gruszka Tested-by: Youngmin Nam Reviewed-by: Ulf Hansson Cc: 5.7+ # 5.7+: 6aa09a5bccd8 async: Split async_schedule_node_domain() Cc: 5.7+ # 5.7+: 7d4b5d7a37bd async: Introduce async_schedule_dev_nocall() Cc: 5.7+ # 5.7+ Signed-off-by: Sasha Levin commit 8b604883d4cb1fa8d6b7d5d7db44b96465c9010b Author: Li zeming Date: Sun Mar 26 06:19:35 2023 +0800 PM: core: Remove unnecessary (void *) conversions [ Upstream commit 73d73f5ee7fb0c42ff87091d105bee720a9565f1 ] Assignments from pointer variables of type (void *) do not require explicit type casts, so remove such type cases from the code in drivers/base/power/main.c where applicable. Signed-off-by: Li zeming [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Stable-dep-of: 7839d0078e0d ("PM: sleep: Fix possible deadlocks in core system-wide PM code") Signed-off-by: Sasha Levin commit 57df40f8008931f7b8f2206c6c3975055eb4bcb5 Author: Rafael J. Wysocki Date: Thu Nov 4 18:26:26 2021 +0100 PM: sleep: Avoid calling put_device() under dpm_list_mtx [ Upstream commit 2aa36604e8243698ff22bd5fef0dd0c6bb07ba92 ] It is generally unsafe to call put_device() with dpm_list_mtx held, because the given device's release routine may carry out an action depending on that lock which then may deadlock, so modify the system-wide suspend and resume of devices to always drop dpm_list_mtx before calling put_device() (and adjust white space somewhat while at it). For instance, this prevents the following splat from showing up in the kernel log after a system resume in certain configurations: [ 3290.969514] ====================================================== [ 3290.969517] WARNING: possible circular locking dependency detected [ 3290.969519] 5.15.0+ #2420 Tainted: G S [ 3290.969523] ------------------------------------------------------ [ 3290.969525] systemd-sleep/4553 is trying to acquire lock: [ 3290.969529] ffff888117ab1138 ((wq_completion)hci0#2){+.+.}-{0:0}, at: flush_workqueue+0x87/0x4a0 [ 3290.969554] but task is already holding lock: [ 3290.969556] ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.969571] which lock already depends on the new lock. [ 3290.969573] the existing dependency chain (in reverse order) is: [ 3290.969575] -> #3 (dpm_list_mtx){+.+.}-{3:3}: [ 3290.969583] __mutex_lock+0x9d/0xa30 [ 3290.969591] device_pm_add+0x2e/0xe0 [ 3290.969597] device_add+0x4d5/0x8f0 [ 3290.969605] hci_conn_add_sysfs+0x43/0xb0 [bluetooth] [ 3290.969689] hci_conn_complete_evt.isra.71+0x124/0x750 [bluetooth] [ 3290.969747] hci_event_packet+0xd6c/0x28a0 [bluetooth] [ 3290.969798] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969842] process_one_work+0x2aa/0x650 [ 3290.969851] worker_thread+0x39/0x400 [ 3290.969859] kthread+0x142/0x170 [ 3290.969865] ret_from_fork+0x22/0x30 [ 3290.969872] -> #2 (&hdev->lock){+.+.}-{3:3}: [ 3290.969881] __mutex_lock+0x9d/0xa30 [ 3290.969887] hci_event_packet+0xba/0x28a0 [bluetooth] [ 3290.969935] hci_rx_work+0x213/0x640 [bluetooth] [ 3290.969978] process_one_work+0x2aa/0x650 [ 3290.969985] worker_thread+0x39/0x400 [ 3290.969993] kthread+0x142/0x170 [ 3290.969999] ret_from_fork+0x22/0x30 [ 3290.970004] -> #1 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}: [ 3290.970013] process_one_work+0x27d/0x650 [ 3290.970020] worker_thread+0x39/0x400 [ 3290.970028] kthread+0x142/0x170 [ 3290.970033] ret_from_fork+0x22/0x30 [ 3290.970038] -> #0 ((wq_completion)hci0#2){+.+.}-{0:0}: [ 3290.970047] __lock_acquire+0x15cb/0x1b50 [ 3290.970054] lock_acquire+0x26c/0x300 [ 3290.970059] flush_workqueue+0xae/0x4a0 [ 3290.970066] drain_workqueue+0xa1/0x130 [ 3290.970073] destroy_workqueue+0x34/0x1f0 [ 3290.970081] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970130] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970195] device_release+0x33/0x90 [ 3290.970201] kobject_release+0x63/0x160 [ 3290.970211] dpm_resume+0x164/0x3e0 [ 3290.970215] dpm_resume_end+0xd/0x20 [ 3290.970220] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970229] pm_suspend+0x26b/0x310 [ 3290.970236] state_store+0x42/0x90 [ 3290.970243] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970251] new_sync_write+0x125/0x1c0 [ 3290.970257] vfs_write+0x360/0x3c0 [ 3290.970263] ksys_write+0xa7/0xe0 [ 3290.970269] do_syscall_64+0x3a/0x80 [ 3290.970276] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970284] other info that might help us debug this: [ 3290.970285] Chain exists of: (wq_completion)hci0#2 --> &hdev->lock --> dpm_list_mtx [ 3290.970297] Possible unsafe locking scenario: [ 3290.970299] CPU0 CPU1 [ 3290.970300] ---- ---- [ 3290.970302] lock(dpm_list_mtx); [ 3290.970306] lock(&hdev->lock); [ 3290.970310] lock(dpm_list_mtx); [ 3290.970314] lock((wq_completion)hci0#2); [ 3290.970319] *** DEADLOCK *** [ 3290.970321] 7 locks held by systemd-sleep/4553: [ 3290.970325] #0: ffff888103bcd448 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xa7/0xe0 [ 3290.970341] #1: ffff888115a14488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x103/0x1b0 [ 3290.970355] #2: ffff888100f719e0 (kn->active#233){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x10c/0x1b0 [ 3290.970369] #3: ffffffff82661048 (autosleep_lock){+.+.}-{3:3}, at: state_store+0x12/0x90 [ 3290.970384] #4: ffffffff82658ac8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x9f/0x310 [ 3290.970399] #5: ffffffff827f2a48 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x4c/0x80 [ 3290.970416] #6: ffffffff8280fca8 (dpm_list_mtx){+.+.}-{3:3}, at: dpm_resume+0x12e/0x3e0 [ 3290.970428] stack backtrace: [ 3290.970431] CPU: 3 PID: 4553 Comm: systemd-sleep Tainted: G S 5.15.0+ #2420 [ 3290.970438] Hardware name: Dell Inc. XPS 13 9380/0RYJWW, BIOS 1.5.0 06/03/2019 [ 3290.970441] Call Trace: [ 3290.970446] dump_stack_lvl+0x44/0x57 [ 3290.970454] check_noncircular+0x105/0x120 [ 3290.970468] ? __lock_acquire+0x15cb/0x1b50 [ 3290.970474] __lock_acquire+0x15cb/0x1b50 [ 3290.970487] lock_acquire+0x26c/0x300 [ 3290.970493] ? flush_workqueue+0x87/0x4a0 [ 3290.970503] ? __raw_spin_lock_init+0x3b/0x60 [ 3290.970510] ? lockdep_init_map_type+0x58/0x240 [ 3290.970519] flush_workqueue+0xae/0x4a0 [ 3290.970526] ? flush_workqueue+0x87/0x4a0 [ 3290.970544] ? drain_workqueue+0xa1/0x130 [ 3290.970552] drain_workqueue+0xa1/0x130 [ 3290.970561] destroy_workqueue+0x34/0x1f0 [ 3290.970572] hci_release_dev+0x49/0x180 [bluetooth] [ 3290.970624] bt_host_release+0x1d/0x30 [bluetooth] [ 3290.970687] device_release+0x33/0x90 [ 3290.970695] kobject_release+0x63/0x160 [ 3290.970705] dpm_resume+0x164/0x3e0 [ 3290.970710] ? dpm_resume_early+0x251/0x3b0 [ 3290.970718] dpm_resume_end+0xd/0x20 [ 3290.970723] suspend_devices_and_enter+0x1a4/0xba0 [ 3290.970737] pm_suspend+0x26b/0x310 [ 3290.970746] state_store+0x42/0x90 [ 3290.970755] kernfs_fop_write_iter+0x135/0x1b0 [ 3290.970764] new_sync_write+0x125/0x1c0 [ 3290.970777] vfs_write+0x360/0x3c0 [ 3290.970785] ksys_write+0xa7/0xe0 [ 3290.970794] do_syscall_64+0x3a/0x80 [ 3290.970803] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3290.970811] RIP: 0033:0x7f41b1328164 [ 3290.970819] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 4a d2 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [ 3290.970824] RSP: 002b:00007ffe6ae21b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 3290.970831] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f41b1328164 [ 3290.970836] RDX: 0000000000000004 RSI: 000055965e651070 RDI: 0000000000000004 [ 3290.970839] RBP: 000055965e651070 R08: 000055965e64f390 R09: 00007f41b1e3d1c0 [ 3290.970843] R10: 000000000000000a R11: 0000000000000246 R12: 0000000000000004 [ 3290.970846] R13: 0000000000000001 R14: 000055965e64f2b0 R15: 0000000000000004 Cc: All applicable Signed-off-by: Rafael J. Wysocki Stable-dep-of: 7839d0078e0d ("PM: sleep: Fix possible deadlocks in core system-wide PM code") Signed-off-by: Sasha Levin commit 2245a8498569fac4ad2e391f38862a859924cf3c Author: Bjorn Helgaas Date: Tue Jan 26 15:29:40 2021 -0600 PM: sleep: Use dev_printk() when possible [ Upstream commit eb23d91af55bc2369fe3f0aa6997e72eb20e16fe ] Use dev_printk() when possible to make messages more consistent with other device-related messages. Signed-off-by: Bjorn Helgaas Signed-off-by: Rafael J. Wysocki Stable-dep-of: 7839d0078e0d ("PM: sleep: Fix possible deadlocks in core system-wide PM code") Signed-off-by: Sasha Levin commit 8a6a51b80bbd6f914b5cbefed98f7427cedc4999 Author: Dan Carpenter Date: Wed Dec 6 18:05:15 2023 +0300 drm/bridge: nxp-ptn3460: simplify some error checking commit 28d3d0696688154cc04983f343011d07bf0508e4 upstream. The i2c_master_send/recv() functions return negative error codes or they return "len" on success. So the error handling here can be written as just normal checks for "if (ret < 0) return ret;". No need to complicate things. Btw, in this code the "len" parameter can never be zero, but even if it were, then I feel like this would still be the best way to write it. Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by: Neil Armstrong Signed-off-by: Dan Carpenter Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain Signed-off-by: Greg Kroah-Hartman commit bedbbdf05663e40a8d4ffed4e1b5cbea6093a484 Author: Tomi Valkeinen Date: Thu Nov 9 09:38:03 2023 +0200 drm/tidss: Fix atomic_flush check commit 95d4b471953411854f9c80b568da7fcf753f3801 upstream. tidss_crtc_atomic_flush() checks if the crtc is enabled, and if not, returns immediately as there's no reason to do any register changes. However, the code checks for 'crtc->state->enable', which does not reflect the actual HW state. We should instead look at the 'crtc->state->active' flag. This causes the tidss_crtc_atomic_flush() to proceed with the flush even if the active state is false, which then causes us to hit the WARN_ON(!crtc->state->event) check. Fix this by checking the active flag, and while at it, fix the related debug print which had "active" and "needs modeset" wrong way. Cc: Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-10-ac91b5ea35c0@ideasonboard.com Signed-off-by: Tomi Valkeinen Signed-off-by: Greg Kroah-Hartman commit ea192526910defc9012c7f2717eea3f54d957593 Author: Dan Carpenter Date: Mon Dec 4 15:29:00 2023 +0300 drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking commit 914437992876838662c968cb416f832110fb1093 upstream. The i2c_master_send/recv() functions return negative error codes or the number of bytes that were able to be sent/received. This code has two problems. 1) Instead of checking if all the bytes were sent or received, it checks that at least one byte was sent or received. 2) If there was a partial send/receive then we should return a negative error code but this code returns success. Fixes: a9fe713d7d45 ("drm/bridge: Add PTN3460 bridge driver") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/0cdc2dce-ca89-451a-9774-1482ab2f4762@moroto.mountain Signed-off-by: Greg Kroah-Hartman commit f55261469be87c55df13db76dc945f6bcd825105 Author: Ville Syrjälä Date: Mon Dec 11 10:16:24 2023 +0200 drm: Don't unref the same fb many times by mistake due to deadlock handling commit cb4daf271302d71a6b9a7c01bd0b6d76febd8f0c upstream. If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl() we proceed to unref the fb and then retry the whole thing from the top. But we forget to reset the fb pointer back to NULL, and so if we then get another error during the retry, before the fb lookup, we proceed the unref the same fb again without having gotten another reference. The end result is that the fb will (eventually) end up being freed while it's still in use. Reset fb to NULL once we've unreffed it to avoid doing it again until we've done another fb lookup. This turned out to be pretty easy to hit on a DG2 when doing async flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I saw that drm_closefb() simply got stuck in a busy loop while walking the framebuffer list. Fortunately I was able to convince it to oops instead, and from there it was easier to track down the culprit. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-1-ville.syrjala@linux.intel.com Acked-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman commit bb575bc3e7675806927232e7b8569b6bcd236acf Author: Mario Limonciello Date: Wed Jan 17 08:29:42 2024 -0600 gpiolib: acpi: Ignore touchpad wakeup on GPD G1619-04 commit 805c74eac8cb306dc69b87b6b066ab4da77ceaf1 upstream. Spurious wakeups are reported on the GPD G1619-04 which can be absolved by programming the GPIO to ignore wakeups. Cc: stable@vger.kernel.org Reported-and-tested-by: George Melikov Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3073 Signed-off-by: Mario Limonciello Reviewed-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman commit 55a60251fa50d4e68175e36666b536a602ce4f6c Author: Florian Westphal Date: Sat Jan 20 22:50:04 2024 +0100 netfilter: nf_tables: reject QUEUE/DROP verdict parameters commit f342de4e2f33e0e39165d8639387aa6c19dff660 upstream. This reverts commit e0abdadcc6e1. core.c:nf_hook_slow assumes that the upper 16 bits of NF_DROP verdicts contain a valid errno, i.e. -EPERM, -EHOSTUNREACH or similar, or 0. Due to the reverted commit, its possible to provide a positive value, e.g. NF_ACCEPT (1), which results in use-after-free. Its not clear to me why this commit was made. NF_QUEUE is not used by nftables; "queue" rules in nftables will result in use of "nft_queue" expression. If we later need to allow specifiying errno values from userspace (do not know why), this has to call NF_DROP_GETERR and check that "err <= 0" holds true. Fixes: e0abdadcc6e1 ("netfilter: nf_tables: accept QUEUE/DROP verdict parameters") Cc: stable@vger.kernel.org Reported-by: Notselwyn Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 9489e214ea8f2a90345516016aa51f2db3a8cc2f Author: Pablo Neira Ayuso Date: Thu Jan 18 10:56:26 2024 +0100 netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain commit 01acb2e8666a6529697141a6017edbf206921913 upstream. Remove netdevice from inet/ingress basechain in case NETDEV_UNREGISTER event is reported, otherwise a stale reference to netdevice remains in the hook list. Fixes: 60a3815da702 ("netfilter: add inet ingress support") Cc: stable@vger.kernel.org Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 05dd9facfb9a1e056752c0901c6e86416037d15a Author: Emmanuel Grumbach Date: Thu Jan 11 15:07:25 2024 +0200 wifi: iwlwifi: fix a memory corruption commit cf4a0d840ecc72fcf16198d5e9c505ab7d5a5e4d upstream. iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer. Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218233 Fixes: cf29c5b66b9f ("iwlwifi: dbg_ini: implement time point handling") Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://msgid.link/20240111150610.2d2b8b870194.I14ed76505a5cf87304e0c9cc05cc0ae85ed3bf91@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit c0760a5c3e284ea73f52e76658557c81b7a2f57b Author: Bernd Edlinger Date: Mon Jan 22 19:34:21 2024 +0100 exec: Fix error handling in begin_new_exec() commit 84c39ec57d409e803a9bb6e4e85daf1243e0e80b upstream. If get_unused_fd_flags() fails, the error handling is incomplete because bprm->cred is already set to NULL, and therefore free_bprm will not unlock the cred_guard_mutex. Note there are two error conditions which end up here, one before and one after bprm->cred is cleared. Fixes: b8a61c9e7b4a ("exec: Generic execfd support") Signed-off-by: Bernd Edlinger Acked-by: Eric W. Biederman Link: https://lore.kernel.org/r/AS8P193MB128517ADB5EFF29E04389EDAE4752@AS8P193MB1285.EURP193.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman commit 30f38928b69bbf2daa7a896fb631f739f0144a70 Author: Ilya Dryomov Date: Wed Jan 17 18:59:44 2024 +0100 rbd: don't move requests to the running list on errors commit ded080c86b3f99683774af0441a58fc2e3d60cae upstream. The running list is supposed to contain requests that are pinning the exclusive lock, i.e. those that must be flushed before exclusive lock is released. When wake_lock_waiters() is called to handle an error, requests on the acquiring list are failed with that error and no flushing takes place. Briefly moving them to the running list is not only pointless but also harmful: if exclusive lock gets acquired before all of their state machines are scheduled and go through rbd_lock_del_request(), we trigger rbd_assert(list_empty(&rbd_dev->running_list)); in rbd_try_acquire_lock(). Cc: stable@vger.kernel.org Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code") Signed-off-by: Ilya Dryomov Reviewed-by: Dongsheng Yang Signed-off-by: Greg Kroah-Hartman commit 2bdf872bcfe629a6202ffd6641615a8ed00e8464 Author: Omar Sandoval Date: Thu Jan 4 11:48:46 2024 -0800 btrfs: don't abort filesystem when attempting to snapshot deleted subvolume commit 7081929ab2572920e94d70be3d332e5c9f97095a upstream. If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Sweet Tea Dorminy Reviewed-by: Anand Jain Signed-off-by: Omar Sandoval Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 5d3687baa9db961f04ec8d840b09888f8f7775e9 Author: Qu Wenruo Date: Wed Jan 10 08:58:26 2024 +1030 btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args commit 173431b274a9a54fc10b273b46e67f46bcf62d2e upstream. Add extra sanity check for btrfs_ioctl_defrag_range_args::flags. This is not really to enhance fuzzing tests, but as a preparation for future expansion on btrfs_ioctl_defrag_range_args. In the future we're going to add new members, allowing more fine tuning for btrfs defrag. Without the -ENONOTSUPP error, there would be no way to detect if the kernel supports those new defrag features. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit f27937426b575670e41204d3b72eb5f7dc2784cf Author: David Sterba Date: Mon Jan 15 20:30:26 2024 +0100 btrfs: don't warn if discard range is not aligned to sector commit a208b3f132b48e1f94f620024e66fea635925877 upstream. There's a warning in btrfs_issue_discard() when the range is not aligned to 512 bytes, originally added in 4d89d377bbb0 ("btrfs: btrfs_issue_discard ensure offset/length are aligned to sector boundaries"). We can't do sub-sector writes anyway so the adjustment is the only thing that we can do and the warning is unnecessary. CC: stable@vger.kernel.org # 4.19+ Reported-by: syzbot+4a4f1eba14eb5c3417d1@syzkaller.appspotmail.com Reviewed-by: Johannes Thumshirn Reviewed-by: Anand Jain Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit f8a7a51a6c2d45c456f86f15512a303ba6026f0b Author: Chung-Chiang Cheng Date: Fri Jan 12 15:41:05 2024 +0800 btrfs: tree-checker: fix inline ref size in error messages commit f398e70dd69e6ceea71463a5380e6118f219197e upstream. The error message should accurately reflect the size rather than the type. Fixes: f82d1c7ca8ae ("btrfs: tree-checker: Add EXTENT_ITEM and METADATA_ITEM check") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana Reviewed-by: Qu Wenruo Signed-off-by: Chung-Chiang Cheng Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit be90e25880f2c205831057fbf70843814c356bcd Author: Fedor Pchelkin Date: Wed Jan 3 13:31:27 2024 +0300 btrfs: ref-verify: free ref cache before clearing mount opt commit f03e274a8b29d1d1c1bbd7f764766cb5ca537ab7 upstream. As clearing REF_VERIFY mount option indicates there were some errors in a ref-verify process, a ref cache is not relevant anymore and should be freed. btrfs_free_ref_cache() requires REF_VERIFY option being set so call it just before clearing the mount option. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Reported-by: syzbot+be14ed7728594dc8bd42@syzkaller.appspotmail.com Fixes: fd708b81d972 ("Btrfs: add a extent ref verify tool") CC: stable@vger.kernel.org # 5.4+ Closes: https://lore.kernel.org/lkml/000000000000e5a65c05ee832054@google.com/ Reported-by: syzbot+c563a3c79927971f950f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/0000000000007fe09705fdc6086c@google.com/ Reviewed-by: Anand Jain Signed-off-by: Fedor Pchelkin Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 7c3a572e15817a7e65b80f0487a760110bff0b1b Author: Shenwei Wang Date: Tue Jan 23 10:51:41 2024 -0600 net: fec: fix the unhandled context fault from smmu [ Upstream commit 5e344807735023cd3a67c37a1852b849caa42620 ] When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8ea231 ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by: Shenwei Wang Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit a52b2faf601082dbc3893036c1fbe5f09e948adc Author: Zhipeng Lu Date: Tue Jan 23 01:24:42 2024 +0800 fjes: fix memleaks in fjes_hw_setup [ Upstream commit f6cc4b6a3ae53df425771000e9c9540cce9b7bb1 ] In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca687702 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by: Zhipeng Lu Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240122172445.3841883-1-alexious@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit e1bf3ec97a8239490ca2f83e0f627863e2acf216 Author: Jakub Kicinski Date: Mon Jan 22 22:05:29 2024 -0800 selftests: netdevsim: fix the udp_tunnel_nic test [ Upstream commit 0879020a7817e7ce636372c016b4528f541c9f4d ] This test is missing a whole bunch of checks for interface renaming and one ifup. Presumably it was only used on a system with renaming disabled and NetworkManager running. Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra") Acked-by: Paolo Abeni Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 83f99138bf3b396f761600ab488054396fb5768f Author: Jenishkumar Maheshbhai Patel Date: Thu Jan 18 19:59:14 2024 -0800 net: mvpp2: clear BM pool before initialization [ Upstream commit 9f538b415db862e74b8c5d3abbccfc1b2b6caa38 ] Register value persist after booting the kernel using kexec which results in kernel panic. Thus clear the BM pool registers before initialisation to fix the issue. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Jenishkumar Maheshbhai Patel Reviewed-by: Maxime Chevallier Link: https://lore.kernel.org/r/20240119035914.2595665-1-jpatel2@marvell.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 6a2e2d9890e7216038cd181300c5e664863c311b Author: Pablo Neira Ayuso Date: Tue Jan 23 16:38:25 2024 +0100 netfilter: nf_tables: validate NFPROTO_* family [ Upstream commit d0009effa8862c20a13af4cb7475d9771b905693 ] Several expressions explicitly refer to NF_INET_* hook definitions from expr->ops->validate, however, family is not validated. Bail out with EOPNOTSUPP in case they are used from unsupported families. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression") Fixes: 2fa841938c64 ("netfilter: nf_tables: introduce routing expression") Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching") Fixes: ad49d86e07a4 ("netfilter: nf_tables: Add synproxy support") Fixes: 4ed8eb6570a4 ("netfilter: nf_tables: Add native tproxy support") Fixes: 6c47260250fc ("netfilter: nf_tables: add xfrm expression") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit 4fbdc3a18f61c41e5dcaf1e9c33b5ee5af1f34e2 Author: Florian Westphal Date: Fri Jan 19 13:34:32 2024 +0100 netfilter: nf_tables: restrict anonymous set and map names to 16 bytes [ Upstream commit b462579b2b86a8f5230543cadd3a4836be27baf7 ] nftables has two types of sets/maps, one where userspace defines the name, and anonymous sets/maps, where userspace defines a template name. For the latter, kernel requires presence of exactly one "%d". nftables uses "__set%d" and "__map%d" for this. The kernel will expand the format specifier and replaces it with the smallest unused number. As-is, userspace could define a template name that allows to move the set name past the 256 bytes upperlimit (post-expansion). I don't see how this could be a problem, but I would prefer if userspace cannot do this, so add a limit of 16 bytes for the '%d' template name. 16 bytes is the old total upper limit for set names that existed when nf_tables was merged initially. Fixes: 387454901bd6 ("netfilter: nf_tables: Allow set names of up to 255 chars") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit cf116d9c3c2aebd653c2dfab5b10c278e9ec3ee5 Author: Zhipeng Lu Date: Wed Jan 17 15:17:36 2024 +0800 net/mlx5e: fix a double-free in arfs_create_groups [ Upstream commit 3c6d5189246f590e4e1f167991558bdb72a4738b ] When `in` allocated by kvzalloc fails, arfs_create_groups will free ft->g and return an error. However, arfs_create_table, the only caller of arfs_create_groups, will hold this error and call to mlx5e_destroy_flow_table, in which the ft->g will be freed again. Fixes: 1cabe6b0965e ("net/mlx5e: Create aRFS flow tables") Signed-off-by: Zhipeng Lu Reviewed-by: Simon Horman Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin commit 1123661a089a2bbf419d34dd9c1fc193fd017c4e Author: Yevgeny Kliteynik Date: Sun Dec 17 11:24:08 2023 +0200 net/mlx5: DR, Use the right GVMI number for drop action [ Upstream commit 5665954293f13642f9c052ead83c1e9d8cff186f ] When FW provides ICM addresses for drop RX/TX, the provided capability is 64 bits that contain its GVMI as well as the ICM address itself. In case of TX DROP this GVMI is different from the GVMI that the domain is operating on. This patch fixes the action to use these GVMI IDs, as provided by FW. Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality") Signed-off-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin commit a3eba5989fc90dc9d4ccd6a12eb51e2007ff61b0 Author: Zhengchao Shao Date: Mon Jan 22 18:20:01 2024 +0800 ipv6: init the accept_queue's spinlocks in inet6_create [ Upstream commit 435e202d645c197dcfd39d7372eb2a56529b6640 ] In commit 198bc90e0e73("tcp: make sure init the accept_queue's spinlocks once"), the spinlocks of accept_queue are initialized only when socket is created in the inet4 scenario. The locks are not initialized when socket is created in the inet6 scenario. The kernel reports the following error: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack_lvl (lib/dump_stack.c:107) register_lock_class (kernel/locking/lockdep.c:1289) __lock_acquire (kernel/locking/lockdep.c:5015) lock_acquire.part.0 (kernel/locking/lockdep.c:5756) _raw_spin_lock_bh (kernel/locking/spinlock.c:178) inet_csk_listen_stop (net/ipv4/inet_connection_sock.c:1386) tcp_disconnect (net/ipv4/tcp.c:2981) inet_shutdown (net/ipv4/af_inet.c:935) __sys_shutdown (./include/linux/file.h:32 net/socket.c:2438) __x64_sys_shutdown (net/socket.c:2445) do_syscall_64 (arch/x86/entry/common.c:52) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f52ecd05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007f52ecf5dde8 EFLAGS: 00000293 ORIG_RAX: 0000000000000030 RAX: ffffffffffffffda RBX: 00007f52ecf5e640 RCX: 00007f52ecd05a3d RDX: 00007f52ecc8b188 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007f52ecf5de20 R08: 00007ffdae45c69f R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 00007f52ecf5e640 R13: 0000000000000000 R14: 00007f52ecc8b060 R15: 00007ffdae45c6e0 Fixes: 198bc90e0e73 ("tcp: make sure init the accept_queue's spinlocks once") Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240122102001.2851701-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit be8d1f619ea3576d6eeca4d4eadbac1e7f8a17ad Author: Zhengchao Shao Date: Mon Jan 22 09:18:07 2024 +0800 netlink: fix potential sleeping issue in mqueue_flush_file [ Upstream commit 234ec0b6034b16869d45128b8cd2dc6ffe596f04 ] I analyze the potential sleeping issue of the following processes: Thread A Thread B ... netlink_create //ref = 1 do_mq_notify ... sock = netlink_getsockbyfilp ... //ref = 2 info->notify_sock = sock; ... ... netlink_sendmsg ... skb = netlink_alloc_large_skb //skb->head is vmalloced ... netlink_unicast ... sk = netlink_getsockbyportid //ref = 3 ... netlink_sendskb ... __netlink_sendskb ... skb_queue_tail //put skb to sk_receive_queue ... sock_put //ref = 2 ... ... ... netlink_release ... deferred_put_nlk_sk //ref = 1 mqueue_flush_file spin_lock remove_notification netlink_sendskb sock_put //ref = 0 sk_free ... __sk_destruct netlink_sock_destruct skb_queue_purge //get skb from sk_receive_queue ... __skb_queue_purge_reason kfree_skb_reason __kfree_skb ... skb_release_all skb_release_head_state netlink_skb_destructor vfree(skb->head) //sleeping while holding spinlock In netlink_sendmsg, if the memory pointed to by skb->head is allocated by vmalloc, and is put to sk_receive_queue queue, also the skb is not freed. When the mqueue executes flush, the sleeping bug will occur. Use vfree_atomic instead of vfree in netlink_skb_destructor to solve the issue. Fixes: c05cdb1b864f ("netlink: allow large data transfers from user-space") Signed-off-by: Zhengchao Shao Link: https://lore.kernel.org/r/20240122011807.2110357-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 69ca75e063a5b47b285f6c3eb6f442b2231c5ce1 Author: Salvatore Dipietro Date: Fri Jan 19 11:01:33 2024 -0800 tcp: Add memory barrier to tcp_push() [ Upstream commit 7267e8dcad6b2f9fce05a6a06335d7040acbc2b6 ] On CPUs with weak memory models, reads and updates performed by tcp_push to the sk variables can get reordered leaving the socket throttled when it should not. The tasklet running tcp_wfree() may also not observe the memory updates in time and will skip flushing any packets throttled by tcp_push(), delaying the sending. This can pathologically cause 40ms extra latency due to bad interactions with delayed acks. Adding a memory barrier in tcp_push removes the bug, similarly to the previous commit bf06200e732d ("tcp: tsq: fix nonagle handling"). smp_mb__after_atomic() is used to not incur in unnecessary overhead on x86 since not affected. Patch has been tested using an AWS c7g.2xlarge instance with Ubuntu 22.04 and Apache Tomcat 9.0.83 running the basic servlet below: import java.io.IOException; import java.io.OutputStreamWriter; import java.io.PrintWriter; import javax.servlet.ServletException; import javax.servlet.http.HttpServlet; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; public class HelloWorldServlet extends HttpServlet { @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=utf-8"); OutputStreamWriter osw = new OutputStreamWriter(response.getOutputStream(),"UTF-8"); String s = "a".repeat(3096); osw.write(s,0,s.length()); osw.flush(); } } Load was applied using wrk2 (https://github.com/kinvolk/wrk2) from an AWS c6i.8xlarge instance. Before the patch an additional 40ms latency from P99.99+ values is observed while, with the patch, the extra latency disappears. No patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.91ms 75.000% 1.13ms 90.000% 1.46ms 99.000% 1.74ms 99.900% 1.89ms 99.990% 41.95ms <<< 40+ ms extra latency 99.999% 48.32ms 100.000% 48.96ms With patch and tcp_autocorking=1 ./wrk -t32 -c128 -d40s --latency -R10000 http://172.31.60.173:8080/hello/hello ... 50.000% 0.90ms 75.000% 1.13ms 90.000% 1.45ms 99.000% 1.72ms 99.900% 1.83ms 99.990% 2.11ms <<< no 40+ ms extra latency 99.999% 2.53ms 100.000% 2.62ms Patch has been also tested on x86 (m7i.2xlarge instance) which it is not affected by this issue and the patch doesn't introduce any additional delay. Fixes: 7aa5470c2c09 ("tcp: tsq: move tsq_flags close to sk_wmem_alloc") Signed-off-by: Salvatore Dipietro Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240119190133.43698-1-dipiets@amazon.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin commit 8499e2f1218ee8d3029360a10001a6374dd135b7 Author: David Howells Date: Mon Jan 8 17:22:36 2024 +0000 afs: Hide silly-rename files from userspace [ Upstream commit 57e9d49c54528c49b8bffe6d99d782ea051ea534 ] There appears to be a race between silly-rename files being created/removed and various userspace tools iterating over the contents of a directory, leading to such errors as: find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory tar: ./include/linux/greybus/.__afs3C95: File removed before we read it when building a kernel. Fix afs_readdir() so that it doesn't return .__afsXXXX silly-rename files to userspace. This doesn't stop them being looked up directly by name as we need to be able to look them up from within the kernel as part of the silly-rename algorithm. Fixes: 79ddbfa500b3 ("afs: Implement sillyrename for unlink and rename") Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Signed-off-by: Sasha Levin commit ef70dfa0b1e5084f32635156c9a5c795352ad860 Author: Petr Pavlu Date: Mon Jan 22 16:09:28 2024 +0100 tracing: Ensure visibility when inserting an element into tracing_map [ Upstream commit 2b44760609e9eaafc9d234a6883d042fc21132a7 ] Running the following two commands in parallel on a multi-processor AArch64 machine can sporadically produce an unexpected warning about duplicate histogram entries: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/hist sleep 0.001 done $ stress-ng --sysbadaddr $(nproc) The warning looks as follows: [ 2911.172474] ------------[ cut here ]------------ [ 2911.173111] Duplicates detected: 1 [ 2911.173574] WARNING: CPU: 2 PID: 12247 at kernel/trace/tracing_map.c:983 tracing_map_sort_entries+0x3e0/0x408 [ 2911.174702] Modules linked in: iscsi_ibft(E) iscsi_boot_sysfs(E) rfkill(E) af_packet(E) nls_iso8859_1(E) nls_cp437(E) vfat(E) fat(E) ena(E) tiny_power_button(E) qemu_fw_cfg(E) button(E) fuse(E) efi_pstore(E) ip_tables(E) x_tables(E) xfs(E) libcrc32c(E) aes_ce_blk(E) aes_ce_cipher(E) crct10dif_ce(E) polyval_ce(E) polyval_generic(E) ghash_ce(E) gf128mul(E) sm4_ce_gcm(E) sm4_ce_ccm(E) sm4_ce(E) sm4_ce_cipher(E) sm4(E) sm3_ce(E) sm3(E) sha3_ce(E) sha512_ce(E) sha512_arm64(E) sha2_ce(E) sha256_arm64(E) nvme(E) sha1_ce(E) nvme_core(E) nvme_auth(E) t10_pi(E) sg(E) scsi_mod(E) scsi_common(E) efivarfs(E) [ 2911.174738] Unloaded tainted modules: cppc_cpufreq(E):1 [ 2911.180985] CPU: 2 PID: 12247 Comm: cat Kdump: loaded Tainted: G E 6.7.0-default #2 1b58bbb22c97e4399dc09f92d309344f69c44a01 [ 2911.182398] Hardware name: Amazon EC2 c7g.8xlarge/, BIOS 1.0 11/1/2018 [ 2911.183208] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 2911.184038] pc : tracing_map_sort_entries+0x3e0/0x408 [ 2911.184667] lr : tracing_map_sort_entries+0x3e0/0x408 [ 2911.185310] sp : ffff8000a1513900 [ 2911.185750] x29: ffff8000a1513900 x28: ffff0003f272fe80 x27: 0000000000000001 [ 2911.186600] x26: ffff0003f272fe80 x25: 0000000000000030 x24: 0000000000000008 [ 2911.187458] x23: ffff0003c5788000 x22: ffff0003c16710c8 x21: ffff80008017f180 [ 2911.188310] x20: ffff80008017f000 x19: ffff80008017f180 x18: ffffffffffffffff [ 2911.189160] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000a15134b8 [ 2911.190015] x14: 0000000000000000 x13: 205d373432323154 x12: 5b5d313131333731 [ 2911.190844] x11: 00000000fffeffff x10: 00000000fffeffff x9 : ffffd1b78274a13c [ 2911.191716] x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 000000000057ffa8 [ 2911.192554] x5 : ffff0012f6c24ec0 x4 : 0000000000000000 x3 : ffff2e5b72b5d000 [ 2911.193404] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0003ff254480 [ 2911.194259] Call trace: [ 2911.194626] tracing_map_sort_entries+0x3e0/0x408 [ 2911.195220] hist_show+0x124/0x800 [ 2911.195692] seq_read_iter+0x1d4/0x4e8 [ 2911.196193] seq_read+0xe8/0x138 [ 2911.196638] vfs_read+0xc8/0x300 [ 2911.197078] ksys_read+0x70/0x108 [ 2911.197534] __arm64_sys_read+0x24/0x38 [ 2911.198046] invoke_syscall+0x78/0x108 [ 2911.198553] el0_svc_common.constprop.0+0xd0/0xf8 [ 2911.199157] do_el0_svc+0x28/0x40 [ 2911.199613] el0_svc+0x40/0x178 [ 2911.200048] el0t_64_sync_handler+0x13c/0x158 [ 2911.200621] el0t_64_sync+0x1a8/0x1b0 [ 2911.201115] ---[ end trace 0000000000000000 ]--- The problem appears to be caused by CPU reordering of writes issued from __tracing_map_insert(). The check for the presence of an element with a given key in this function is: val = READ_ONCE(entry->val); if (val && keys_match(key, val->key, map->key_size)) ... The write of a new entry is: elt = get_free_elt(map); memcpy(elt->key, key, map->key_size); entry->val = elt; The "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;" stores may become visible in the reversed order on another CPU. This second CPU might then incorrectly determine that a new key doesn't match an already present val->key and subsequently insert a new element, resulting in a duplicate. Fix the problem by adding a write barrier between "memcpy(elt->key, key, map->key_size);" and "entry->val = elt;", and for good measure, also use WRITE_ONCE(entry->val, elt) for publishing the element. The sequence pairs with the mentioned "READ_ONCE(entry->val);" and the "val->key" check which has an address dependency. The barrier is placed on a path executed when adding an element for a new key. Subsequent updates targeting the same key remain unaffected. From the user's perspective, the issue was introduced by commit c193707dde77 ("tracing: Remove code which merges duplicates"), which followed commit cbf4100efb8f ("tracing: Add support to detect and avoid duplicates"). The previous code operated differently; it inherently expected potential races which result in duplicates but merged them later when they occurred. Link: https://lore.kernel.org/linux-trace-kernel/20240122150928.27725-1-petr.pavlu@suse.com Fixes: c193707dde77 ("tracing: Remove code which merges duplicates") Signed-off-by: Petr Pavlu Acked-by: Tom Zanussi Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin commit 5ae8d50044633306ff160fcf7faa24994175efe1 Author: Sharath Srinivasan Date: Fri Jan 19 17:48:39 2024 -0800 net/rds: Fix UBSAN: array-index-out-of-bounds in rds_cmsg_recv [ Upstream commit 13e788deb7348cc88df34bed736c3b3b9927ea52 ] Syzcaller UBSAN crash occurs in rds_cmsg_recv(), which reads inc->i_rx_lat_trace[j + 1] with index 4 (3 + 1), but with array size of 4 (RDS_RX_MAX_TRACES). Here 'j' is assigned from rs->rs_rx_trace[i] and in-turn from trace.rx_trace_pos[i] in rds_recv_track_latency(), with both arrays sized 3 (RDS_MSG_RX_DGRAM_TRACE_MAX). So fix the off-by-one bounds check in rds_recv_track_latency() to prevent a potential crash in rds_cmsg_recv(). Found by syzcaller: ================================================================= UBSAN: array-index-out-of-bounds in net/rds/recv.c:585:39 index 4 is out of range for type 'u64 [4]' CPU: 1 PID: 8058 Comm: syz-executor228 Not tainted 6.6.0-gd2f51b3516da #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x136/0x150 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsan_handle_out_of_bounds+0xd5/0x130 lib/ubsan.c:348 rds_cmsg_recv+0x60d/0x700 net/rds/recv.c:585 rds_recvmsg+0x3fb/0x1610 net/rds/recv.c:716 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1066 __sys_recvfrom+0x1b6/0x2f0 net/socket.c:2246 __do_sys_recvfrom net/socket.c:2264 [inline] __se_sys_recvfrom net/socket.c:2260 [inline] __x64_sys_recvfrom+0xe0/0x1b0 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b ================================================================== Fixes: 3289025aedc0 ("RDS: add receive message trace used by application") Reported-by: Chenyuan Yang Closes: https://lore.kernel.org/linux-rdma/CALGdzuoVdq-wtQ4Az9iottBqC5cv9ZhcE5q8N7LfYFvkRsOVcw@mail.gmail.com/ Signed-off-by: Sharath Srinivasan Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9ccdef19cf9497c2803b005369668feb91cacdfd Author: Kuniyuki Iwashima Date: Thu Jan 18 17:55:15 2024 -0800 llc: Drop support for ETH_P_TR_802_2. [ Upstream commit e3f9bed9bee261e3347131764e42aeedf1ffea61 ] syzbot reported an uninit-value bug below. [0] llc supports ETH_P_802_2 (0x0004) and used to support ETH_P_TR_802_2 (0x0011), and syzbot abused the latter to trigger the bug. write$tun(r0, &(0x7f0000000040)={@val={0x0, 0x11}, @val, @mpls={[], @llc={@snap={0xaa, 0x1, ')', "90e5dd"}}}}, 0x16) llc_conn_handler() initialises local variables {saddr,daddr}.mac based on skb in llc_pdu_decode_sa()/llc_pdu_decode_da() and passes them to __llc_lookup(). However, the initialisation is done only when skb->protocol is htons(ETH_P_802_2), otherwise, __llc_lookup_established() and __llc_lookup_listener() will read garbage. The missing initialisation existed prior to commit 211ed865108e ("net: delete all instances of special processing for token ring"). It removed the part to kick out the token ring stuff but forgot to close the door allowing ETH_P_TR_802_2 packets to sneak into llc_rcv(). Let's remove llc_tr_packet_type and complete the deprecation. [0]: BUG: KMSAN: uninit-value in __llc_lookup_established+0xe9d/0xf90 __llc_lookup_established+0xe9d/0xf90 __llc_lookup net/llc/llc_conn.c:611 [inline] llc_conn_handler+0x4bd/0x1360 net/llc/llc_conn.c:791 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 __netif_receive_skb_one_core net/core/dev.c:5527 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5641 netif_receive_skb_internal net/core/dev.c:5727 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5786 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable daddr created at: llc_conn_handler+0x53/0x1360 net/llc/llc_conn.c:783 llc_rcv+0xfbb/0x14a0 net/llc/llc_input.c:206 CPU: 1 PID: 5004 Comm: syz-executor994 Not tainted 6.6.0-syzkaller-14500-g1c41041124bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Fixes: 211ed865108e ("net: delete all instances of special processing for token ring") Reported-by: syzbot+b5ad66046b913bc04c6f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b5ad66046b913bc04c6f Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240119015515.61898-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 04f2a74b562f3a7498be0399309669f342793d8c Author: Eric Dumazet Date: Thu Jan 18 18:36:25 2024 +0000 llc: make llc_ui_sendmsg() more robust against bonding changes [ Upstream commit dad555c816a50c6a6a8a86be1f9177673918c647 ] syzbot was able to trick llc_ui_sendmsg(), allocating an skb with no headroom, but subsequently trying to push 14 bytes of Ethernet header [1] Like some others, llc_ui_sendmsg() releases the socket lock before calling sock_alloc_send_skb(). Then it acquires it again, but does not redo all the sanity checks that were performed. This fix: - Uses LL_RESERVED_SPACE() to reserve space. - Check all conditions again after socket lock is held again. - Do not account Ethernet header for mtu limitation. [1] skbuff: skb_under_panic: text:ffff800088baa334 len:1514 put:14 head:ffff0000c9c37000 data:ffff0000c9c36ff2 tail:0x5dc end:0x6c0 dev:bond0 kernel BUG at net/core/skbuff.c:193 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6875 Comm: syz-executor.0 Not tainted 6.7.0-rc8-syzkaller-00101-g0802e17d9aca-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:189 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 lr : skb_panic net/core/skbuff.c:189 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 sp : ffff800096f97000 x29: ffff800096f97010 x28: ffff80008cc8d668 x27: dfff800000000000 x26: ffff0000cb970c90 x25: 00000000000005dc x24: ffff0000c9c36ff2 x23: ffff0000c9c37000 x22: 00000000000005ea x21: 00000000000006c0 x20: 000000000000000e x19: ffff800088baa334 x18: 1fffe000368261ce x17: ffff80008e4ed000 x16: ffff80008a8310f8 x15: 0000000000000001 x14: 1ffff00012df2d58 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000ff0100 x9 : e28a51f1087e8400 x8 : e28a51f1087e8400 x7 : ffff80008028f8d0 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff800082b78714 x2 : 0000000000000001 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic net/core/skbuff.c:189 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:203 skb_push+0xf0/0x108 net/core/skbuff.c:2451 eth_header+0x44/0x1f8 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3188 [inline] llc_mac_hdr_init+0x110/0x17c net/llc/llc_output.c:33 llc_sap_action_send_xid_c+0x170/0x344 net/llc/llc_s_ac.c:85 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x1ec/0x774 net/llc/llc_sap.c:209 llc_build_and_send_xid_pkt+0x12c/0x1c0 net/llc/llc_sap.c:270 llc_ui_sendmsg+0x7bc/0xb1c net/llc/af_llc.c:997 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x194/0x274 net/socket.c:767 splice_to_socket+0x7cc/0xd58 fs/splice.c:881 do_splice_from fs/splice.c:933 [inline] direct_splice_actor+0xe4/0x1c0 fs/splice.c:1142 splice_direct_to_actor+0x2a0/0x7e4 fs/splice.c:1088 do_splice_direct+0x20c/0x348 fs/splice.c:1194 do_sendfile+0x4bc/0xc70 fs/read_write.c:1254 __do_sys_sendfile64 fs/read_write.c:1322 [inline] __se_sys_sendfile64 fs/read_write.c:1308 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1308 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x158 arch/arm64/kernel/entry-common.c:678 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:595 Code: aa1803e6 aa1903e7 a90023f5 94792f6a (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+2a7024e9502df538e8ef@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20240118183625.4007013-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit ea4c3cb7fdeda8d26a18665611ae6d6b4cf81d06 Author: Lin Ma Date: Thu Jan 18 21:03:06 2024 +0800 vlan: skip nested type that is not IFLA_VLAN_QOS_MAPPING [ Upstream commit 6c21660fe221a15c789dee2bc2fd95516bc5aeaf ] In the vlan_changelink function, a loop is used to parse the nested attributes IFLA_VLAN_EGRESS_QOS and IFLA_VLAN_INGRESS_QOS in order to obtain the struct ifla_vlan_qos_mapping. These two nested attributes are checked in the vlan_validate_qos_map function, which calls nla_validate_nested_deprecated with the vlan_map_policy. However, this deprecated validator applies a LIBERAL strictness, allowing the presence of an attribute with the type IFLA_VLAN_QOS_UNSPEC. Consequently, the loop in vlan_changelink may parse an attribute of type IFLA_VLAN_QOS_UNSPEC and believe it carries a payload of struct ifla_vlan_qos_mapping, which is not necessarily true. To address this issue and ensure compatibility, this patch introduces two type checks that skip attributes whose type is not IFLA_VLAN_QOS_MAPPING. Fixes: 07b5b17e157b ("[VLAN]: Use rtnl_link API") Signed-off-by: Lin Ma Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240118130306.1644001-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit fc74f86a33677362291ee34d6d06fdddee4afe6e Author: Michael Chan Date: Wed Jan 17 15:45:11 2024 -0800 bnxt_en: Wait for FLR to complete during probe [ Upstream commit 3c1069fa42872f95cf3c6fedf80723d391e12d57 ] The first message to firmware may fail if the device is undergoing FLR. The driver has some recovery logic for this failure scenario but we must wait 100 msec for FLR to complete before proceeding. Otherwise the recovery will always fail. Fixes: ba02629ff6cb ("bnxt_en: log firmware status on firmware init failure") Reviewed-by: Damodharam Ammepalli Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20240117234515.226944-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit bc99dcedd2f422d602516762b96c8ef1ae6b2882 Author: Zhengchao Shao Date: Thu Jan 18 09:20:19 2024 +0800 tcp: make sure init the accept_queue's spinlocks once [ Upstream commit 198bc90e0e734e5f98c3d2833e8390cac3df61b2 ] When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add inet_listen //start listen spin_lock(&queue->rskq_lock) inet_csk_listen_start ... reqsk_queue_alloc ... spin_lock_init spin_unlock(&queue->rskq_lock) //warning When the socket receives the ACK packet during the three-way handshake, it will hold spinlock. And then the user actively shutdowns the socket and listens to the socket immediately, the spinlock will be initialized. When the socket is going to release the spinlock, a warning is generated. Also the same issue to fastopenq.lock. Move init spinlock to inet_create and inet_accept to make sure init the accept_queue's spinlocks once. Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue") Fixes: 168a8f58059a ("tcp: TCP Fast Open Server - main code path") Reported-by: Ming Shu Signed-off-by: Zhengchao Shao Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240118012019.1751966-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 5fed92ca32eafbfae8b6bee8ca34cca71c6a8b6d Author: Wen Gu Date: Thu Jan 18 12:32:10 2024 +0800 net/smc: fix illegal rmb_desc access in SMC-D connection dump [ Upstream commit dbc153fd3c142909e564bb256da087e13fbf239c ] A crash was found when dumping SMC-D connections. It can be reproduced by following steps: - run nginx/wrk test: smc_run nginx smc_run wrk -t 16 -c 1000 -d -H 'Connection: Close' - continuously dump SMC-D connections in parallel: watch -n 1 'smcss -D' BUG: kernel NULL pointer dereference, address: 0000000000000030 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x66/0x150 ? exc_page_fault+0x69/0x140 ? asm_exc_page_fault+0x26/0x30 ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] ? __kmalloc_node_track_caller+0x35d/0x430 ? __alloc_skb+0x77/0x170 smc_diag_dump_proto+0xd0/0xf0 [smc_diag] smc_diag_dump+0x26/0x60 [smc_diag] netlink_dump+0x19f/0x320 __netlink_dump_start+0x1dc/0x300 smc_diag_handler_dump+0x6a/0x80 [smc_diag] ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag] sock_diag_rcv_msg+0x121/0x140 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 sock_diag_rcv+0x28/0x40 netlink_unicast+0x22a/0x330 netlink_sendmsg+0x1f8/0x420 __sock_sendmsg+0xb0/0xc0 ____sys_sendmsg+0x24e/0x300 ? copy_msghdr_from_user+0x62/0x80 ___sys_sendmsg+0x7c/0xd0 ? __do_fault+0x34/0x160 ? do_read_fault+0x5f/0x100 ? do_fault+0xb0/0x110 ? __handle_mm_fault+0x2b0/0x6c0 __sys_sendmsg+0x4d/0x80 do_syscall_64+0x69/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 It is possible that the connection is in process of being established when we dump it. Assumed that the connection has been registered in a link group by smc_conn_create() but the rmb_desc has not yet been initialized by smc_buf_create(), thus causing the illegal access to conn->rmb_desc. So fix it by checking before dump. Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Signed-off-by: Wen Gu Reviewed-by: Dust Li Reviewed-by: Wenjia Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c71e1c1a08c2454440eee3bd84112281938d5965 Author: Paolo Bonzini Date: Tue Mar 8 04:49:37 2022 -0500 KVM: use __vcalloc for very large allocations commit 37b2a6510a48ca361ced679f92682b7b7d7d0330 upstream. Allocations whose size is related to the memslot size can be arbitrarily large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy" sizes that fit in 32 bits. Cc: stable@vger.kernel.org Fixes: 7661809d493b ("mm: don't allow oversized kvmalloc() calls") Reviewed-by: David Hildenbrand Signed-off-by: Paolo Bonzini Signed-off-by: Alexander Ofitserov Signed-off-by: Greg Kroah-Hartman commit 95670878a612adaac74e97fc6f6a1d0aa8601de9 Author: Paolo Bonzini Date: Tue Mar 8 04:47:22 2022 -0500 mm: vmalloc: introduce array allocation functions commit a8749a35c39903120ec421ef2525acc8e0daa55c upstream. Linux has dozens of occurrences of vmalloc(array_size()) and vzalloc(array_size()). Allow to simplify the code by providing vmalloc_array and vcalloc, as well as the underscored variants that let the caller specify the GFP flags. Acked-by: Michal Hocko Signed-off-by: Paolo Bonzini Signed-off-by: Alexander Ofitserov Signed-off-by: Greg Kroah-Hartman commit 02f629bb460d01c81d3acb8d7e383dde65acbb0c Author: Kees Cook Date: Fri Jan 26 22:31:43 2024 +0300 smb3: Replace smb2pdu 1-element arrays with flex-arrays commit eb3e28c1e89b4984308777231887e41aa8a0151f upstream. The kernel is globally removing the ambiguous 0-length and 1-element arrays in favor of flexible arrays, so that we can gain both compile-time and run-time array bounds checking[1]. Replace the trailing 1-element array with a flexible array in the following structures: struct smb2_err_rsp struct smb2_tree_connect_req struct smb2_negotiate_rsp struct smb2_sess_setup_req struct smb2_sess_setup_rsp struct smb2_read_req struct smb2_read_rsp struct smb2_write_req struct smb2_write_rsp struct smb2_query_directory_req struct smb2_query_directory_rsp struct smb2_set_info_req struct smb2_change_notify_rsp struct smb2_create_rsp struct smb2_query_info_req struct smb2_query_info_rsp Replace the trailing 1-element array with a flexible array, but leave the existing structure padding: struct smb2_file_all_info struct smb2_lock_req Adjust all related size calculations to match the changes to sizeof(). No machine code output or .data section differences are produced after these changes. [1] For lots of details, see both: https://docs.kernel.org/process/deprecated.html#zero-length-and-one-element-arrays https://people.kernel.org/kees/bounded-flexible-arrays-in-c Cc: Steve French Cc: Paulo Alcantara Cc: Ronnie Sahlberg Cc: Shyam Prasad N Cc: Tom Talpey Cc: Namjae Jeon Cc: Sergey Senozhatsky Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Reviewed-by: Namjae Jeon Signed-off-by: Kees Cook Signed-off-by: Steve French Signed-off-by: Vasiliy Kovalev Signed-off-by: Greg Kroah-Hartman commit 443b16ee3d9ce0a3ece0e3526a5af883e5b16eaf Author: Kees Cook Date: Fri Jan 26 22:31:42 2024 +0300 stddef: Introduce DECLARE_FLEX_ARRAY() helper commit 3080ea5553cc909b000d1f1d964a9041962f2c5b upstream. There are many places where kernel code wants to have several different typed trailing flexible arrays. This would normally be done with multiple flexible arrays in a union, but since GCC and Clang don't (on the surface) allow this, there have been many open-coded workarounds, usually involving neighboring 0-element arrays at the end of a structure. For example, instead of something like this: struct thing { ... union { struct type1 foo[]; struct type2 bar[]; }; }; code works around the compiler with: struct thing { ... struct type1 foo[0]; struct type2 bar[]; }; Another case is when a flexible array is wanted as the single member within a struct (which itself is usually in a union). For example, this would be worked around as: union many { ... struct { struct type3 baz[0]; }; }; These kinds of work-arounds cause problems with size checks against such zero-element arrays (for example when building with -Warray-bounds and -Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements), so they must all be converted to "real" flexible arrays, avoiding warnings like this: fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree': fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds] 209 | anode->btree.u.internal[0].down = cpu_to_le32(a); | ~~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from fs/hpfs/hpfs_fn.h:26, from fs/hpfs/anode.c:10: fs/hpfs/hpfs.h:412:32: note: while referencing 'internal' 412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving | ^~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg': drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds] 360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22, from drivers/net/can/usb/etas_es58x/es58x_fd.c:17: drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg' 231 | u8 raw_msg[0]; | ^~~~~~~ However, it _is_ entirely possible to have one or more flexible arrays in a struct or union: it just has to be in another struct. And since it cannot be alone in a struct, such a struct must have at least 1 other named member -- but that member can be zero sized. Wrap all this nonsense into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays in unions (or alone in a struct). As with struct_group(), since this is needed in UAPI headers as well, implement the core there, with a non-UAPI wrapper. Additionally update kernel-doc to understand its existence. https://github.com/KSPP/linux/issues/137 Cc: Arnd Bergmann Cc: "Gustavo A. R. Silva" Signed-off-by: Kees Cook Signed-off-by: Vasiliy Kovalev Signed-off-by: Greg Kroah-Hartman commit bfc0647791d7a8f3e178a896a26c4ef7794876b7 Author: Matthew Wilcox (Oracle) Date: Mon Aug 14 15:41:00 2023 +0100 block: Remove special-casing of compound pages commit 1b151e2435fc3a9b10c8946c6aebe9f3e1938c55 upstream. The special casing was originally added in pre-git history; reproducing the commit log here: > commit a318a92567d77 > Author: Andrew Morton > Date: Sun Sep 21 01:42:22 2003 -0700 > > [PATCH] Speed up direct-io hugetlbpage handling > > This patch short-circuits all the direct-io page dirtying logic for > higher-order pages. Without this, we pointlessly bounce BIOs up to > keventd all the time. In the last twenty years, compound pages have become used for more than just hugetlb. Rewrite these functions to operate on folios instead of pages and remove the special case for hugetlbfs; I don't think it's needed any more (and if it is, we can put it back in as a call to folio_test_hugetlb()). This was found by inspection; as far as I can tell, this bug can lead to pages used as the destination of a direct I/O read not being marked as dirty. If those pages are then reclaimed by the MM without being dirtied for some other reason, they won't be written out. Then when they're faulted back in, they will not contain the data they should. It'll take a pretty unusual setup to produce this problem with several races all going the wrong way. This problem predates the folio work; it could for example have been triggered by mmaping a THP in tmpfs and using that as the target of an O_DIRECT read. Fixes: 800d8c63b2e98 ("shmem: add huge pages support") Cc: Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit ff4332f1ec757dcfafd4209ffcdd86467751e3f2 Author: Al Viro Date: Sun Nov 19 20:25:58 2023 -0500 rename(): fix the locking of subdirectories commit 22e111ed6c83dcde3037fc81176012721bc34c0b upstream. We should never lock two subdirectories without having taken ->s_vfs_rename_mutex; inode pointer order or not, the "order" proposed in 28eceeda130f "fs: Lock moved directories" is not transitive, with the usual consequences. The rationale for locking renamed subdirectory in all cases was the possibility of race between rename modifying .. in a subdirectory to reflect the new parent and another thread modifying the same subdirectory. For a lot of filesystems that's not a problem, but for some it can lead to trouble (e.g. the case when short directory contents is kept in the inode, but creating a file in it might push it across the size limit and copy its contents into separate data block(s)). However, we need that only in case when the parent does change - otherwise ->rename() doesn't need to do anything with .. entry in the first place. Some instances are lazy and do a tautological update anyway, but it's really not hard to avoid. Amended locking rules for rename(): find the parent(s) of source and target if source and target have the same parent lock the common parent else lock ->s_vfs_rename_mutex lock both parents, in ancestor-first order; if neither is an ancestor of another, lock the parent of source first. find the source and target. if source and target have the same parent if operation is an overwriting rename of a subdirectory lock the target subdirectory else if source is a subdirectory lock the source if target is a subdirectory lock the target lock non-directories involved, in inode pointer order if both source and target are such. That way we are guaranteed that parents are locked (for obvious reasons), that any renamed non-directory is locked (nfsd relies upon that), that any victim is locked (emptiness check needs that, among other things) and subdirectory that changes parent is locked (needed to protect the update of .. entries). We are also guaranteed that any operation locking more than one directory either takes ->s_vfs_rename_mutex or locks a parent followed by its child. Cc: stable@vger.kernel.org Fixes: 28eceeda130f "fs: Lock moved directories" Reviewed-by: Jan Kara Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit d132010e6d5c0cb2e28ce9e91ab3ad0ad4cd1063 Author: Zhihao Cheng Date: Fri Dec 22 16:54:46 2023 +0800 ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path commit 1e022216dcd248326a5bb95609d12a6815bca4e2 upstream. For error handling path in ubifs_symlink(), inode will be marked as bad first, then iput() is invoked. If inode->i_link is initialized by fscrypt_encrypt_symlink() in encryption scenario, inode->i_link won't be freed by callchain ubifs_free_inode -> fscrypt_free_inode in error handling path, because make_bad_inode() has changed 'inode->i_mode' as 'S_IFREG'. Following kmemleak is easy to be reproduced by injecting error in ubifs_jnl_update() when doing symlink in encryption scenario: unreferenced object 0xffff888103da3d98 (size 8): comm "ln", pid 1692, jiffies 4294914701 (age 12.045s) backtrace: kmemdup+0x32/0x70 __fscrypt_encrypt_symlink+0xed/0x1c0 ubifs_symlink+0x210/0x300 [ubifs] vfs_symlink+0x216/0x360 do_symlinkat+0x11a/0x190 do_syscall_64+0x3b/0xe0 There are two ways fixing it: 1. Remove make_bad_inode() in error handling path. We can do that because ubifs_evict_inode() will do same processes for good symlink inode and bad symlink inode, for inode->i_nlink checking is before is_bad_inode(). 2. Free inode->i_link before marking inode bad. Method 2 is picked, it has less influence, personally, I think. Cc: stable@vger.kernel.org Fixes: 2c58d548f570 ("fscrypt: cache decrypted symlink target in ->i_link") Signed-off-by: Zhihao Cheng Suggested-by: Eric Biggers Reviewed-by: Eric Biggers Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman commit c6e6640784e4706963a35796774ffca5d5654533 Author: Dave Airlie Date: Thu Jan 18 06:19:57 2024 +1000 nouveau/vmm: don't set addr on the fail path to avoid warning commit cacea81390fd8c8c85404e5eb2adeb83d87a912e upstream. nvif_vmm_put gets called if addr is set, but if the allocation fails we don't need to call put, otherwise we get a warning like [523232.435671] ------------[ cut here ]------------ [523232.435674] WARNING: CPU: 8 PID: 1505697 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put+0x72/0x80 [nouveau] [523232.435795] Modules linked in: uinput rfcomm snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep sunrpc binfmt_misc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common iwlmvm nfit libnvdimm vfat fat x86_pkg_temp_thermal intel_powerclamp mac80211 snd_soc_avs snd_soc_hda_codec coretemp snd_hda_ext_core snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_hdmi snd_compress snd_hda_codec_generic ac97_bus snd_pcm_dmaengine snd_hda_intel libarc4 snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm iwlwifi snd_hda_core btusb snd_hwdep btrtl snd_seq btintel irqbypass btbcm rapl snd_seq_device eeepc_wmi btmtk intel_cstate iTCO_wdt cfg80211 snd_pcm asus_wmi bluetooth intel_pmc_bxt iTCO_vendor_support snd_timer ledtrig_audio pktcdvd snd mei_me [523232.435828] sparse_keymap intel_uncore i2c_i801 platform_profile wmi_bmof mei pcspkr ioatdma soundcore i2c_smbus rfkill idma64 dca joydev acpi_tad loop zram nouveau drm_ttm_helper ttm video drm_exec drm_gpuvm gpu_sched crct10dif_pclmul i2c_algo_bit nvme crc32_pclmul crc32c_intel drm_display_helper polyval_clmulni nvme_core polyval_generic e1000e mxm_wmi cec ghash_clmulni_intel r8169 sha512_ssse3 nvme_common wmi pinctrl_sunrisepoint uas usb_storage ip6_tables ip_tables fuse [523232.435849] CPU: 8 PID: 1505697 Comm: gnome-shell Tainted: G W 6.6.0-rc7-nvk-uapi+ #12 [523232.435851] Hardware name: System manufacturer System Product Name/ROG STRIX X299-E GAMING II, BIOS 1301 09/24/2021 [523232.435852] RIP: 0010:nvif_vmm_put+0x72/0x80 [nouveau] [523232.435934] Code: 00 00 48 89 e2 be 02 00 00 00 48 c7 04 24 00 00 00 00 48 89 44 24 08 e8 fc bf ff ff 85 c0 75 0a 48 c7 43 08 00 00 00 00 eb b3 <0f> 0b eb f2 e8 f5 c9 b2 e6 0f 1f 44 00 00 90 90 90 90 90 90 90 90 [523232.435936] RSP: 0018:ffffc900077ffbd8 EFLAGS: 00010282 [523232.435937] RAX: 00000000fffffffe RBX: ffffc900077ffc00 RCX: 0000000000000010 [523232.435938] RDX: 0000000000000010 RSI: ffffc900077ffb38 RDI: ffffc900077ffbd8 [523232.435940] RBP: ffff888e1c4f2140 R08: 0000000000000000 R09: 0000000000000000 [523232.435940] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888503811800 [523232.435941] R13: ffffc900077ffca0 R14: ffff888e1c4f2140 R15: ffff88810317e1e0 [523232.435942] FS: 00007f933a769640(0000) GS:ffff88905fa00000(0000) knlGS:0000000000000000 [523232.435943] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [523232.435944] CR2: 00007f930bef7000 CR3: 00000005d0322001 CR4: 00000000003706e0 [523232.435945] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [523232.435946] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [523232.435964] Call Trace: [523232.435965] [523232.435966] ? nvif_vmm_put+0x72/0x80 [nouveau] [523232.436051] ? __warn+0x81/0x130 [523232.436055] ? nvif_vmm_put+0x72/0x80 [nouveau] [523232.436138] ? report_bug+0x171/0x1a0 [523232.436142] ? handle_bug+0x3c/0x80 [523232.436144] ? exc_invalid_op+0x17/0x70 [523232.436145] ? asm_exc_invalid_op+0x1a/0x20 [523232.436149] ? nvif_vmm_put+0x72/0x80 [nouveau] [523232.436230] ? nvif_vmm_put+0x64/0x80 [nouveau] [523232.436342] nouveau_vma_del+0x80/0xd0 [nouveau] [523232.436506] nouveau_vma_new+0x1a0/0x210 [nouveau] [523232.436671] nouveau_gem_object_open+0x1d0/0x1f0 [nouveau] [523232.436835] drm_gem_handle_create_tail+0xd1/0x180 [523232.436840] drm_prime_fd_to_handle_ioctl+0x12e/0x200 [523232.436844] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10 [523232.436847] drm_ioctl_kernel+0xd3/0x180 [523232.436849] drm_ioctl+0x26d/0x4b0 [523232.436851] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10 [523232.436855] nouveau_drm_ioctl+0x5a/0xb0 [nouveau] [523232.437032] __x64_sys_ioctl+0x94/0xd0 [523232.437036] do_syscall_64+0x5d/0x90 [523232.437040] ? syscall_exit_to_user_mode+0x2b/0x40 [523232.437044] ? do_syscall_64+0x6c/0x90 [523232.437046] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Reported-by: Faith Ekstrand Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20240117213852.295565-1-airlied@gmail.com Signed-off-by: Greg Kroah-Hartman commit 83217f1bcb35aa460c8d061b2f6d9d697e2ea4e0 Author: Mario Limonciello Date: Mon Nov 27 23:36:51 2023 -0600 rtc: Adjust failure return code for cmos_set_alarm() commit 1311a8f0d4b23f58bbababa13623aa40b8ad4e0c upstream. When mc146818_avoid_UIP() fails to return a valid value, this is because UIP didn't clear in the timeout period. Adjust the return code in this case to -ETIMEDOUT. Tested-by: Mateusz Jończyk Reviewed-by: Mateusz Jończyk Acked-by: Mateusz Jończyk Cc: Fixes: cdedc45c579f ("rtc: cmos: avoid UIP when reading alarm time") Fixes: cd17420ebea5 ("rtc: cmos: avoid UIP when writing alarm time") Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20231128053653.101798-3-mario.limonciello@amd.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman commit b51578bd86beb4ea3e39dce078f8cfc95ea0e3fe Author: Andy Shevchenko Date: Fri Dec 8 00:19:01 2023 +0200 mmc: mmc_spi: remove custom DMA mapped buffers commit 84a6be7db9050dd2601c9870f65eab9a665d2d5d upstream. There is no need to duplicate what SPI core or individual controller drivers already do, i.e. mapping the buffers for DMA capable transfers. Note, that the code, besides its redundancy, was buggy: strictly speaking there is no guarantee, while it's true for those which can use this code (see below), that the SPI host controller _is_ the device which does DMA. Also see the Link tags below. Additional notes. Currently only two SPI host controller drivers may use premapped (by the user) DMA buffers: - drivers/spi/spi-au1550.c - drivers/spi/spi-fsl-spi.c Both of them have DMA mapping support code. I don't expect that SPI host controller code is worse than what has been done in mmc_spi. Hence I do not expect any regressions here. Otherwise, I'm pretty much sure these regressions have to be fixed in the respective drivers, and not here. That said, remove all related pieces of DMA mapping code from mmc_spi. Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/ Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux Signed-off-by: Andy Shevchenko Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 59020bf0999ff7da8aedcd00ef8f0d75d93b6d20 Author: Avri Altman Date: Wed Nov 29 11:25:35 2023 +0200 mmc: core: Use mrq.sbc in close-ended ffu commit 4d0c8d0aef6355660b6775d57ccd5d4ea2e15802 upstream. Field Firmware Update (ffu) may use close-ended or open ended sequence. Each such sequence is comprised of a write commands enclosed between 2 switch commands - to and from ffu mode. So for the close-ended case, it will be: cmd6->cmd23-cmd25-cmd6. Some host controllers however, get confused when multi-block rw is sent without sbc, and may generate auto-cmd12 which breaks the ffu sequence. I encountered this issue while testing fwupd (github.com/fwupd/fwupd) on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad. Instead of a quirk, or hooking the request function of the msm ops, it would be better to fix the ioctl handling and make it use mrq.sbc instead of issuing SET_BLOCK_COUNT separately. Signed-off-by: Avri Altman Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 625cb3f3bc8aeb7cc762ca7ca169c93dfe89d6dc Author: Vegard Nossum Date: Mon Jan 1 00:59:58 2024 +0100 scripts/get_abi: fix source path leak commit 5889d6ede53bc17252f79c142387e007224aa554 upstream. The code currently leaks the absolute path of the ABI files into the rendered documentation. There exists code to prevent this, but it is not effective when an absolute path is passed, which it is when $srctree is used. I consider this to be a minimal, stop-gap fix; a better fix would strip off the actual prefix instead of hacking it off with a regex. Link: https://mastodon.social/@vegard/111677490643495163 Cc: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Vegard Nossum Signed-off-by: Jonathan Corbet Link: https://lore.kernel.org/r/20231231235959.3342928-1-vegard.nossum@oracle.com Signed-off-by: Greg Kroah-Hartman commit 311dc5afad11aadb290c6e04cd6b7cf7116ee857 Author: Alfred Piccioni Date: Tue Dec 19 10:09:09 2023 +0100 lsm: new security_file_ioctl_compat() hook commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream. Some ioctl commands do not require ioctl permission, but are routed to other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*). However, if a 32-bit process is running on a 64-bit kernel, it emits 32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are being checked erroneously, which leads to these ioctl operations being routed to the ioctl permission, rather than the correct file permissions. This was also noted in a RED-PEN finding from a while back - "/* RED-PEN how should LSM module know it's handling 32bit? */". This patch introduces a new hook, security_file_ioctl_compat(), that is called from the compat ioctl syscall. All current LSMs have been changed to support this hook. Reviewing the three places where we are currently using security_file_ioctl(), it appears that only SELinux needs a dedicated compat change; TOMOYO and SMACK appear to be functional without any change. Cc: stable@vger.kernel.org Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"") Signed-off-by: Alfred Piccioni Reviewed-by: Stephen Smalley [PM: subject tweak, line length fixes, and alignment corrections] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit f726690397df8ebfe2242192e30c4f61eebde06b Author: Johan Hovold Date: Wed Dec 13 18:34:00 2023 +0100 arm64: dts: qcom: sdm845: fix USB DP/DM HS PHY interrupts commit 204f9ed4bad6293933179517624143b8f412347c upstream. The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt controller in order to be able to wake the system up from low-power states and to be able to detect disconnect events, which requires triggering on falling edges. A recent commit updated the trigger type but failed to change the interrupt provider as required. This leads to the current Linux driver failing to probe instead of printing an error during suspend and USB wakeup not working as intended. Fixes: 84ad9ac8d9ca ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types") Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman commit dfc2c685f3a9c4987e9581a389f8129911901ebb Author: Johan Hovold Date: Mon Nov 20 17:43:28 2023 +0100 arm64: dts: qcom: sdm845: fix USB wakeup interrupt types commit 84ad9ac8d9ca29033d589e79a991866b38e23b85 upstream. The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected. Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman commit ac4dcccbe9106a5cec483d2ffa7f628b95340a07 Author: Rafael J. Wysocki Date: Wed Dec 27 21:38:23 2023 +0100 async: Introduce async_schedule_dev_nocall() commit 7d4b5d7a37bdd63a5a3371b988744b060d5bb86f upstream. In preparation for subsequent changes, introduce a specialized variant of async_schedule_dev() that will not invoke the argument function synchronously when it cannot be scheduled for asynchronous execution. The new function, async_schedule_dev_nocall(), will be used for fixing possible deadlocks in the system-wide power management core code. Signed-off-by: Rafael J. Wysocki Reviewed-by: Stanislaw Gruszka for the series. Tested-by: Youngmin Nam Reviewed-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 9ef68b58fd00cbb39f6eeacd9f224b99912dde62 Author: Rafael J. Wysocki Date: Wed Dec 27 21:37:02 2023 +0100 async: Split async_schedule_node_domain() commit 6aa09a5bccd8e224d917afdb4c278fc66aacde4d upstream. In preparation for subsequent changes, split async_schedule_node_domain() in two pieces so as to allow the bottom part of it to be called from a somewhat different code path. No functional impact. Signed-off-by: Rafael J. Wysocki Reviewed-by: Stanislaw Gruszka Tested-by: Youngmin Nam Reviewed-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman commit 1dd8449e2008870e1ac5e3a477ea599b92111656 Author: Helge Deller Date: Wed Jan 3 21:02:16 2024 +0100 parisc/firmware: Fix F-extend for PDC addresses commit 735ae74f73e55c191d48689bd11ff4a06ea0508f upstream. When running with narrow firmware (64-bit kernel using a 32-bit firmware), extend PDC addresses into the 0xfffffff0.00000000 region instead of the 0xf0f0f0f0.00000000 region. This fixes the power button on the C3700 machine in qemu (64-bit CPU with 32-bit firmware), and my assumption is that the previous code was really never used (because most 64-bit machines have a 64-bit firmware), or it just worked on very old machines because they may only decode 40-bit of virtual addresses. Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 20a6dea2d1c68d4e03c6bb50bc12e72e226b5c0e Author: Qiang Yu Date: Mon Dec 11 14:42:52 2023 +0800 bus: mhi: host: Drop chan lock before queuing buffers commit 01bd694ac2f682fb8017e16148b928482bc8fa4b upstream. Ensure read and write locks for the channel are not taken in succession by dropping the read lock from parse_xfer_event() such that a callback given to client can potentially queue buffers and acquire the write lock in that process. Any queueing of buffers should be done without channel read lock acquired as it can result in multiple locks and a soft lockup. Cc: # 5.7 Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Signed-off-by: Qiang Yu Reviewed-by: Jeffrey Hugo Tested-by: Jeffrey Hugo Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/1702276972-41296-3-git-send-email-quic_qianyu@quicinc.com [mani: added fixes tag and cc'ed stable] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Greg Kroah-Hartman commit 69ca89d80f2c8a1f5af429b955637beea7eead30 Author: Xiaolei Wang Date: Fri Dec 15 10:00:49 2023 +0800 rpmsg: virtio: Free driver_override when rpmsg_remove() commit d5362c37e1f8a40096452fc201c30e705750e687 upstream. Free driver_override when rpmsg_remove(), otherwise the following memory leak will occur: unreferenced object 0xffff0000d55d7080 (size 128): comm "kworker/u8:2", pid 56, jiffies 4294893188 (age 214.272s) hex dump (first 32 bytes): 72 70 6d 73 67 5f 6e 73 00 00 00 00 00 00 00 00 rpmsg_ns........ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009c94c9c1>] __kmem_cache_alloc_node+0x1f8/0x320 [<000000002300d89b>] __kmalloc_node_track_caller+0x44/0x70 [<00000000228a60c3>] kstrndup+0x4c/0x90 [<0000000077158695>] driver_set_override+0xd0/0x164 [<000000003e9c4ea5>] rpmsg_register_device_override+0x98/0x170 [<000000001c0c89a8>] rpmsg_ns_register_device+0x24/0x30 [<000000008bbf8fa2>] rpmsg_probe+0x2e0/0x3ec [<00000000e65a68df>] virtio_dev_probe+0x1c0/0x280 [<00000000443331cc>] really_probe+0xbc/0x2dc [<00000000391064b1>] __driver_probe_device+0x78/0xe0 [<00000000a41c9a5b>] driver_probe_device+0xd8/0x160 [<000000009c3bd5df>] __device_attach_driver+0xb8/0x140 [<0000000043cd7614>] bus_for_each_drv+0x7c/0xd4 [<000000003b929a36>] __device_attach+0x9c/0x19c [<00000000a94e0ba8>] device_initial_probe+0x14/0x20 [<000000003c999637>] bus_probe_device+0xa0/0xac Signed-off-by: Xiaolei Wang Fixes: b0b03b811963 ("rpmsg: Release rpmsg devices in backends") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231215020049.78750-1-xiaolei.wang@windriver.com Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman commit cd51e26a3b89706beec64f2d8296cfb1c34e0c79 Author: Herbert Xu Date: Tue Nov 28 14:22:13 2023 +0800 crypto: s390/aes - Fix buffer overread in CTR mode commit d07f951903fa9922c375b8ab1ce81b18a0034e3b upstream. When processing the last block, the s390 ctr code will always read a whole block, even if there isn't a whole block of data left. Fix this by using the actual length left and copy it into a buffer first for processing. Fixes: 0200f3ecc196 ("crypto: s390 - add System z hardware support for CTR mode") Cc: Reported-by: Guangwu Zhang Signed-off-by: Herbert Xu Reviewd-by: Harald Freudenberger Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit c6a8111aacbfe7a8a70f46cc0de8eed00561693c Author: Herbert Xu Date: Sat Dec 2 09:01:54 2023 +0800 hwrng: core - Fix page fault dead lock on mmap-ed hwrng commit 78aafb3884f6bc6636efcc1760c891c8500b9922 upstream. There is a dead-lock in the hwrng device read path. This triggers when the user reads from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user. Reported-by: Edward Adam Davis Reported-by: syzbot+c52ab18308964d248092@syzkaller.appspotmail.com Fixes: 9996508b3353 ("hwrng: core - Replace u32 in driver API with byte array") Cc: Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 981a31b7547af42c673524b05a51465d452f9b84 Author: Hongchen Zhang Date: Thu Nov 16 08:56:09 2023 +0800 PM: hibernate: Enforce ordering during image compression/decompression commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream. An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes fails with the following error messaged in the dmesg log: Invalid LZO compressed length That happens because when compressing/decompressing the image, the synchronization between the control thread and the compress/decompress/crc thread is based on a relaxed ordering interface, which is unreliable, and the following situation may occur: CPU 0 CPU 1 save_image_lzo lzo_compress_threadfn atomic_set(&d->stop, 1); atomic_read(&data[thr].stop) data[thr].cmp = data[thr].cmp_len; WRITE data[thr].cmp_len Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4, wrong cmp_len is loaded. To maintain data consistency between the two threads, use the acquire/release variants of atomic set and read operations. Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image") Cc: All applicable Signed-off-by: Hongchen Zhang Co-developed-by: Weihao Li Signed-off-by: Weihao Li [ rjw: Subject rewrite and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman commit 462c383e732fa99c60aff711c43ec9d6eb27921e Author: Herbert Xu Date: Thu Dec 7 18:36:57 2023 +0800 crypto: api - Disallow identical driver names commit 27016f75f5ed47e2d8e0ca75a8ff1f40bc1a5e27 upstream. Disallow registration of two algorithms with identical driver names. Cc: Reported-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit fa9491224183525c913b2e8eba3443e9f913e423 Author: Suraj Jitindar Singh Date: Wed Dec 13 16:16:35 2023 +1100 ext4: allow for the last group to be marked as trimmed commit 7c784d624819acbeefb0018bac89e632467cca5a upstream. The ext4 filesystem tracks the trim status of blocks at the group level. When an entire group has been trimmed then it is marked as such and subsequent trim invocations with the same minimum trim size will not be attempted on that group unless it is marked as able to be trimmed again such as when a block is freed. Currently the last group can't be marked as trimmed due to incorrect logic in ext4_last_grp_cluster(). ext4_last_grp_cluster() is supposed to return the zero based index of the last cluster in a group. This is then used by ext4_try_to_trim_range() to determine if the trim operation spans the entire group and as such if the trim status of the group should be recorded. ext4_last_grp_cluster() takes a 0 based group index, thus the valid values for grp are 0..(ext4_get_groups_count - 1). Any group index less than (ext4_get_groups_count - 1) is not the last group and must have EXT4_CLUSTERS_PER_GROUP(sb) clusters. For the last group we need to calculate the number of clusters based on the number of blocks in the group. Finally subtract 1 from the number of clusters as zero based indexing is expected. Rearrange the function slightly to make it clear what we are calculating and returning. Reproducer: // Create file system where the last group has fewer blocks than // blocks per group $ mkfs.ext4 -b 4096 -g 8192 /dev/nvme0n1 8191 $ mount /dev/nvme0n1 /mnt Before Patch: $ fstrim -v /mnt /mnt: 25.9 MiB (27156480 bytes) trimmed // Group not marked as trimmed so second invocation still discards blocks $ fstrim -v /mnt /mnt: 25.9 MiB (27156480 bytes) trimmed After Patch: fstrim -v /mnt /mnt: 25.9 MiB (27156480 bytes) trimmed // Group marked as trimmed so second invocation DOESN'T discard any blocks fstrim -v /mnt /mnt: 0 B (0 bytes) trimmed Fixes: 45e4ab320c9b ("ext4: move setting of trimmed bit into ext4_try_to_trim_range()") Cc: # 4.19+ Signed-off-by: Suraj Jitindar Singh Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231213051635.37731-1-surajjs@amazon.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit d173ef1255bbefc071f5d21a504935b80314e1f6 Author: Jonathan Cameron Date: Sun Jan 30 20:56:47 2022 +0000 iio:adc:ad7091r: Move exports into IIO_AD7091R namespace. commit 8a0080af84d3fb2423f0b3b55eff666f545eb097 upstream. In order to avoid unnecessary pollution of the global symbol namespace move the core/library functions into a specific namespace and import that into the various specific device drivers that use them. For more information see https://lwn.net/Articles/760045/ An alternative here would be to conclude that we are unlikely to see support for the other ad7091r parts in the near future and just merge the two modules into one supporting just the i2c -5 variant. Signed-off-by: Jonathan Cameron Cc: Paul Cercueil Reviewed-by: Paul Cercueil Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220130205701.334592-3-jic23@kernel.org Signed-off-by: Greg Kroah-Hartman commit 9de69732dde4e443c1c7f89acbbed2c45a6a8e17 Author: Amelie Delaunay Date: Wed Dec 13 17:04:52 2023 +0100 dmaengine: fix NULL pointer in channel unregistration function [ Upstream commit f5c24d94512f1b288262beda4d3dcb9629222fc7 ] __dma_async_device_channel_register() can fail. In case of failure, chan->local is freed (with free_percpu()), and chan->local is nullified. When dma_async_device_unregister() is called (because of managed API or intentionally by DMA controller driver), channels are unconditionally unregistered, leading to this NULL pointer: [ 1.318693] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0 [...] [ 1.484499] Call trace: [ 1.486930] device_del+0x40/0x394 [ 1.490314] device_unregister+0x20/0x7c [ 1.494220] __dma_async_device_channel_unregister+0x68/0xc0 Look at dma_async_device_register() function error path, channel device unregistration is done only if chan->local is not NULL. Then add the same condition at the beginning of __dma_async_device_channel_unregister() function, to avoid NULL pointer issue whatever the API used to reach this function. Fixes: d2fb0a043838 ("dmaengine: break out channel registration") Signed-off-by: Amelie Delaunay Reviewed-by: Dave Jiang Link: https://lore.kernel.org/r/20231213160452.2598073-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 653d2890602c9ea4a73b9afc1ffe053dcf431bd0 Author: Marcelo Schmitt Date: Tue Dec 19 17:26:27 2023 -0300 iio: adc: ad7091r: Enable internal vref if external vref is not supplied [ Upstream commit e71c5c89bcb165a02df35325aa13d1ee40112401 ] The ADC needs a voltage reference to work correctly. Users can provide an external voltage reference or use the chip internal reference to operate the ADC. The availability of an in chip reference for the ADC saves the user from having to supply an external voltage reference, which makes the external reference an optional property as described in the device tree documentation. Though, to use the internal reference, it must be enabled by writing to the configuration register. Enable AD7091R internal voltage reference if no external vref is supplied. Fixes: 260442cc5be4 ("iio: adc: ad7091r5: Add scale and external VREF support") Signed-off-by: Marcelo Schmitt Link: https://lore.kernel.org/r/b865033fa6a4fc4bf2b4a98ec51a6144e0f64f77.1703013352.git.marcelo.schmitt1@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 1eba6f7ffa295a0eec098c107043074be7cc4ec5 Author: Marcelo Schmitt Date: Tue Dec 19 17:26:01 2023 -0300 iio: adc: ad7091r: Allow users to configure device events [ Upstream commit 020e71c7ffc25dfe29ed9be6c2d39af7bd7f661f ] AD7091R-5 devices are supported by the ad7091r-5 driver together with the ad7091r-base driver. Those drivers declared iio events for notifying user space when ADC readings fall bellow the thresholds of low limit registers or above the values set in high limit registers. However, to configure iio events and their thresholds, a set of callback functions must be implemented and those were not present until now. The consequence of trying to configure ad7091r-5 events without the proper callback functions was a null pointer dereference in the kernel because the pointers to the callback functions were not set. Implement event configuration callbacks allowing users to read/write event thresholds and enable/disable event generation. Since the event spec structs are generic to AD7091R devices, also move those from the ad7091r-5 driver the base driver so they can be reused when support for ad7091r-2/-4/-8 be added. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Suggested-by: David Lechner Signed-off-by: Marcelo Schmitt Link: https://lore.kernel.org/r/59552d3548dabd56adc3107b7b4869afee2b0c3c.1703013352.git.marcelo.schmitt1@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin commit 9ec7498a25f13634ff8723aa72830172049f2f0a Author: Marcelo Schmitt Date: Sat Dec 16 14:46:37 2023 -0300 iio: adc: ad7091r: Set alert bit in config register [ Upstream commit 149694f5e79b0c7a36ceb76e7c0d590db8f151c1 ] The ad7091r-base driver sets up an interrupt handler for firing events when inputs are either above or below a certain threshold. However, for the interrupt signal to come from the device it must be configured to enable the ALERT/BUSY/GPO pin to be used as ALERT, which was not being done until now. Enable interrupt signals on the ALERT/BUSY/GPO pin by setting the proper bit in the configuration register. Signed-off-by: Marcelo Schmitt Link: https://lore.kernel.org/r/e8da2ee98d6df88318b14baf3dc9630e20218418.1702746240.git.marcelo.schmitt1@gmail.com Signed-off-by: Jonathan Cameron Stable-dep-of: 020e71c7ffc2 ("iio: adc: ad7091r: Allow users to configure device events") Signed-off-by: Sasha Levin commit be5d6a297d30003a91160d02f1c9232d41edbb00 Author: Hugo Villeneuve Date: Thu Dec 21 18:18:09 2023 -0500 serial: sc16is7xx: add check for unsupported SPI modes during probe [ Upstream commit 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 ] The original comment is confusing because it implies that variants other than the SC16IS762 supports other SPI modes beside SPI_MODE_0. Extract from datasheet: The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752... In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The same is also true of the SC16IS760 variant versus the SC16IS740 and SC16IS750 variants. For all variants, only SPI mode 0 is supported. Change comment and abort probing if the specified SPI mode is not SPI_MODE_0. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 8df2aec94bf5ce999c6a40927ebdc5d855358379 Author: Oleksij Rempel Date: Tue Oct 27 10:57:23 2020 +0100 spi: introduce SPI_MODE_X_MASK macro [ Upstream commit 029b42d8519cef70c4fb5fcaccd08f1053ed2bf0 ] Provide a macro to filter all SPI_MODE_0,1,2,3 mode in one run. The latest SPI framework will parse the devicetree in following call sequence: of_register_spi_device() -> of_spi_parse_dt() So, driver do not need to pars the devicetree and will get prepared flags in the probe. On one hand it is good far most drivers. On other hand some drivers need to filter flags provide by SPI framework and apply know to work flags. This drivers may use SPI_MODE_X_MASK to filter MODE flags and set own, known flags: spi->flags &= ~SPI_MODE_X_MASK; spi->flags |= SPI_MODE_0; Signed-off-by: Oleksij Rempel Link: https://lore.kernel.org/r/20201027095724.18654-2-o.rempel@pengutronix.de Signed-off-by: Mark Brown Stable-dep-of: 6d710b769c1f ("serial: sc16is7xx: add check for unsupported SPI modes during probe") Signed-off-by: Sasha Levin commit 6ec08ce3bf7fe2de211a855253bfa90b82243107 Author: Hugo Villeneuve Date: Thu Dec 21 18:18:10 2023 -0500 serial: sc16is7xx: set safe default SPI clock frequency [ Upstream commit 3ef79cd1412236d884ab0c46b4d1921380807b48 ] 15 MHz is supported only by 76x variants. If the SPI clock frequency is not specified, use a safe default clock value of 4 MHz that is supported by all variants. Also use HZ_PER_MHZ macro to improve readability. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: Signed-off-by: Hugo Villeneuve Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit e83f1149942f9bfabae4ffc030bb2134e04aa862 Author: Daniel Lezcano Date: Tue Sep 7 19:57:48 2021 -0700 units: add the HZ macros [ Upstream commit e2c77032fcbe515194107994d12cd72ddb77b022 ] The macros for the unit conversion for frequency are duplicated in different places. Provide these macros in the 'units' header, so they can be reused. Link: https://lkml.kernel.org/r/20210816114732.1834145-3-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano Reviewed-by: Christian Eggers Reviewed-by: Andy Shevchenko Cc: Chanwoo Choi Cc: Guenter Roeck Cc: Jonathan Cameron Cc: Jonathan Cameron Cc: Kyungmin Park Cc: Lars-Peter Clausen Cc: Lukasz Luba Cc: Maxime Coquelin Cc: Miquel Raynal Cc: MyungJoo Ham Cc: Peter Meerwald Cc: "Rafael J. Wysocki" Cc: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 3ef79cd14122 ("serial: sc16is7xx: set safe default SPI clock frequency") Signed-off-by: Sasha Levin commit 762217e973ea713526b2c54ed85f0f3dc7fb4012 Author: Daniel Lezcano Date: Tue Sep 7 19:57:44 2021 -0700 units: change from 'L' to 'UL' [ Upstream commit c9221919a2d2df5741ab074dfec5bdfc6f1e043b ] Patch series "Add Hz macros", v3. There are multiple definitions of the HZ_PER_MHZ or HZ_PER_KHZ in the different drivers. Instead of duplicating this definition again and again, add one in the units.h header to be reused in all the place the redefiniton occurs. At the same time, change the type of the Watts, as they can not be negative. This patch (of 10): The users of the macros are safe to be assigned with an unsigned instead of signed as the variables using them are themselves unsigned. Link: https://lkml.kernel.org/r/20210816114732.1834145-1-daniel.lezcano@linaro.org Link: https://lkml.kernel.org/r/20210816114732.1834145-2-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano Cc: Andy Shevchenko Cc: Jonathan Cameron Cc: Christian Eggers Cc: Lukasz Luba Cc: MyungJoo Ham Cc: Kyungmin Park Cc: Lars-Peter Clausen Cc: Peter Meerwald Cc: Zhang Rui Cc: Guenter Roeck Cc: Miquel Raynal Cc: Maxime Coquelin Cc: "Rafael J. Wysocki" Cc: Daniel Lezcano Cc: Chanwoo Choi Cc: Jonathan Cameron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Stable-dep-of: 3ef79cd14122 ("serial: sc16is7xx: set safe default SPI clock frequency") Signed-off-by: Sasha Levin commit f37f4a0c537ca739538281c1c5bf55a739835816 Author: qizhong cheng Date: Mon Dec 11 17:49:23 2023 +0800 PCI: mediatek: Clear interrupt status before dispatching handler [ Upstream commit 4e11c29873a8a296a20f99b3e03095e65ebf897d ] We found a failure when using the iperf tool during WiFi performance testing, where some MSIs were received while clearing the interrupt status, and these MSIs cannot be serviced. The interrupt status can be cleared even if the MSI status remains pending. As such, given the edge-triggered interrupt type, its status should be cleared before being dispatched to the handler of the underling device. [kwilczynski: commit log, code comment wording] Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: qizhong cheng Signed-off-by: Jianjun Wang Signed-off-by: Krzysztof Wilczyński [bhelgaas: rewrap comment] Signed-off-by: Bjorn Helgaas Reviewed-by: AngeloGioacchino Del Regno Cc: Signed-off-by: Sasha Levin commit 490eaca84275d1634fe89c2c2b7f4c08dd75fc82 Author: Frank Li Date: Sun Dec 24 10:38:15 2023 -0500 usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled [ Upstream commit 40c304109e866a7dc123661a5c8ca72f6b5e14e0 ] Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still met problem when do ISO transfer if sg enabled. Data pattern likes below when sg enabled, package size is 1k and mult is 2 [UVC Header(8B) ] [data(3k - 8)] ... The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen position as below pattern: 0xd000: wrong 0xe000: wrong 0xf000: correct 0x10000: wrong 0x11000: wrong 0x12000: correct ... To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to start DMA address's alignment. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit bf703214190c850468ba07c85b05e5c3421698dd Author: Frank Li Date: Sun Dec 24 10:38:14 2023 -0500 usb: cdns3: fix iso transfer error when mult is not zero [ Upstream commit 92f02efa1d86d7dcaef7f38a5fe3396c4e88a93c ] ISO basic transfer is ITP(SOF) Package_0 Package_1 ... Package_n CDNS3 DMA start dma transfer from memmory to internal FIFO when get SOF, controller will transfer data to usb bus from internal FIFO when get IN token. According USB spec defination: Maximum number of packets = (bMaxBurst + 1) * (Mult + 1) Internal memory should be the same as (bMaxBurst + 1) * (Mult + 1). DMA don't fetch data advance when ISO transfer, so only reserve (bMaxBurst + 1) * (Mult + 1) internal memory for ISO transfer. Need save Mult and bMaxBurst information and set it into EP_CFG register, otherwise only 1 package is sent by controller, other package will be lost. Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-3-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 6aec2f089d5c3928ac133f21b5f0041dd7824fbd Author: Frank Li Date: Fri Jul 7 19:00:15 2023 -0400 usb: cdns3: fix incorrect calculation of ep_buf_size when more than one config [ Upstream commit 2627335a1329a0d39d8d277994678571c4f21800 ] Previously, the cdns3_gadget_check_config() function in the cdns3 driver mistakenly calculated the ep_buf_size by considering only one configuration's endpoint information because "claimed" will be clear after call usb_gadget_check_config(). The fix involves checking the private flags EP_CLAIMED instead of relying on the "claimed" flag. Fixes: dce49449e04f ("usb: cdns3: allocate TX FIFO size according to composite EP number") Cc: stable Reported-by: Ravi Gunasekaran Signed-off-by: Frank Li Acked-by: Peter Chen Tested-by: Ravi Gunasekaran Link: https://lore.kernel.org/r/20230707230015.494999-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 92f02efa1d86 ("usb: cdns3: fix iso transfer error when mult is not zero") Signed-off-by: Sasha Levin commit 2fdc98b05cb2a7b8692f55b44d11c7fd91745bf1 Author: Frank Li Date: Sun Dec 24 10:38:13 2023 -0500 usb: cdns3: fix uvc failure work since sg support enabled [ Upstream commit 1b8be5ecff26201bafb0a554c74e91571299fb94 ] When IP version >= DEV_VER_V2, gadget:sg_supported is true. So uvc gadget function driver will use sg to equeue data, first is 8bytes header, the second is 1016bytes data. cdns3_prepare_trb: ep2in: trb 0000000000ac755f, dma buf: 0xbf455000, size: 8, burst: 128 ctrl: 0x00000415 (C=1, T=0, ISP, CHAIN, Normal) cdns3_prepare_trb: ep2in: trb 00000000a574e693, dma buf: 0xc0200fe0, size: 1016, burst: 128 ctrl: 0x00000405 (C=1, T=0, ISP, Normal) But cdns3_ep_run_transfer() can't correctly handle this case, which only support one TRB for ISO transfer. The controller requires duplicate the TD for each SOF if priv_ep->interval is not 1. DMA will read data from DDR to internal FIFO when get SOF. Send data to bus when receive IN token. DMA always refill FIFO when get SOF regardless host send IN token or not. If host send IN token later, some frames data will be lost. Fixed it by below major steps: 1. Calculate numembers of TRB base on sg_nums and priv_ep->interval. 2. Remove CHAIN flags for each end TRB of TD when duplicate TD. 3. The controller requires LINK TRB must be first TRB of TD. When check there are not enough TRBs lefts, just fill LINK TRB for left TRBs. .... CHAIN_TRB DATA_TRB, CHAIN_TRB DATA_TRB, LINK_TRB ... LINK_TRB ^End of TRB List Cc: Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20231224153816.1664687-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 67d3c71cf856512f497afd4f9dda9544e2e6fffe Author: Pawel Laszczak Date: Mon Dec 14 12:04:33 2020 +0100 usb: cdns3: Fixes for sparse warnings [ Upstream commit fba8701baed76eac00b84b59f09f6a077f24c534 ] Patch fixes the following warnings: cdns3-gadget.c:1203: sparse: warning: incorrect type in assignment (different base types) cdns3-gadget.c:1203: sparse: expected restricted __le32 [usertype] length cdns3-gadget.c:1203: sparse: got unsigned long cdns3-gadget.c:1250: sparse: warning: invalid assignment: |= cdns3-gadget.c:1250: sparse: left side has type restricted __le32 cdns3-gadget.c:1250: sparse: right side has type unsigned long cdns3-gadget.c:1253: sparse: warning: invalid assignment: |= cdns3-gadget.c:1253: sparse: left side has type restricted __le32 cdns3-gadget.c:1253: sparse: right side has type unsigned long cdns3-ep0.c:367: sparse: warning: restricted __le16 degrades to integer cdns3-ep0.c:792: sparse: warning: symbol 'cdns3_gadget_ep0_ops' was not declared. Should it be static? Reported-by: kernel test robot Signed-off-by: Pawel Laszczak Signed-off-by: Peter Chen Stable-dep-of: 1b8be5ecff26 ("usb: cdns3: fix uvc failure work since sg support enabled") Signed-off-by: Sasha Levin